INDUSTRIALAssembly Guide

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd

Sample arrangementscabinets sold seperately

Tower

Island

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 1

INDUSTRIALAssembly Guide

DOORSAFE

REQUIRED TOOLS

INSTALLATION SHOULD BE PERFORMED BY A

COMPETENT PERSON ONLY. THIS PRODUCT COULD

BE DANGEROUS IF INCORRECTLY INSTALLED.

PRIOR TO INSTALLATION, FIXTURES INCLUDING DOORS, DRAWERS, LOOSE

SHELVES & LEGS SHOULD BE REMOVED TO ENSURE A SAFE INSTALLATION.

WREN RECOMMENDS USING DOORSAFE FOR TEMPORARY STORAGE.

Page 2

INDUSTRIALTOWER

Assembly Guide

Configuration may vary in accordance to specific customer kitchen plancabinets Included seperately

End Components Extension Components

Legs Legs

35mm Bolt & Washer

16mm Bolt & Washer

(K)30mmScrew

(L)16mm Screw

Detail A Detail BA B

End Frame Shelving (330, 570)

600

Extension Frame Shelving (330, 570)

600

Wall Securing Bracket

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 3

INDUSTRIALTOWER

Assembly Guide

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd

Step 1.Using 4 x 35mm Bolt & Washer attach End Frame Shelf as shown,to secure to End or Internal Legs, where applicable. Adjust leg height per frame by twisting to suit.

For Shelf Positions see Specific Customer Kitchen Plan.

Step 2.Repeat shelf assembly as appropriate to customer, to form End/Extension Tower Frame, as shown.

Step 3.Attach assembled Tower Frames where appropriate to customer as shown.

End/Extension Shelf

End/Extension Shelf

End/Internal Leg

End/Internal Leg

Tower Frame Assembly

End/

Inte

rnal

Leg

s

Samplearrangements

Extension Frame Shelf

EndFrame Shelf

End/Internal Leg

End/Internal LegEnd

/Ext

ensi

on F

ram

e Sh

elf

BTM

End/Internal Leg

TOP

End/Internal Frame Shelf Bolt Location

Btm of End/Internal Leg

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd Page 4

INDUSTRIAL TOWER

Assembly Guide

Step 6.Using 2 x 16mm Screws (L) per connecting plate, screw up through fixing plate into the base panel of each unit as shown.

Step 5. Where applicable, position door and drawer cabinets in accordance to customer specific frontal thickness. Ensure correct positioning of cabinets.

Step 4. Securing Metal Frame to WallTo secure tower frames, use the provided brackets to secure to wall. Secure bracket to top frame shelf at both sides using 16mm Bolt & Washer. Then screw through into wall as shown. Screws for fixing to walls are not provided as these vary depending on your wall material and construction. Ensure appropriate fixings for wall constructions are used.

Cabinet Installation

Front

Tower Assembly

Connecting Plate

LL

View from underside of unit

See Customer Specific Order for requirements.

Top Shelf

Top Shelf

To Wall

Decor

End

Decor

EndDecor Panel

Step 7. Decor PanelsMeasure and cut appropriately to ensure full cover of bare carcase. If necessary, scribe decor end panel to end of unit.

KStep 8. Decor Panel InstallationEnsure cabinets are located accordingly. Clamp décor end panels adjacent to the unit inside of the frame and screw through the unit into the décor panel using 30mm screws (K). Screw at the top and bottom of unit away from fixings such as drawers and hinges. For upper décor panels screw through the top of the unit at the Front/Back. Place cover caps on the heads of screws to conceal.

Step 9. Glass Shelf InstallationFor glass shelf installation only, install 1x rubber stopper provided with glass shelf on each connecting plate as shown. Position glass shelf with care.

RubberStopper

Please ensure steps are followed for a safe installation.

OR

Cabinet

Cabinet

Frtl

THK

Flush

Front

Front

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 5

INDUSTRIALISLAND

Assembly Guide

35mm Bolt & Washer

16mm Bolt & Washer

End Components:

Internal Components:

Internal Frame Shelving

End Frame Shelving

(1215)600-1000

(1215)300-1000

(975)600-1000

(975)300-1000

(645)600-1000

(645)300-1000

Legs

Legs

Configuration may vary in accordance to specific customer kitchen plancabinets sold seperately

Unit Spacers

Detail A

Detail B

B

A

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd Page 6

INDUSTRIALISLAND

Assembly GuideStep 1.Using 4 x 35mm Bolt & Washer attach End Frame Shelf as shown, to secure to End or Internal Legs, where applicable. Adjust leg height per frame by twisting to suit.

For Shelf Positions see Specific Customer Kitchen Plan.

Step 2.Using 4 x 35mm Bolt & Washer secure Internal Frame Shelf to Internal Legs where applicable as shown.

Btm of End/Internal Leg

End

Leg

End Frame

For shelf positions see specific customer kitchen plan

End Frame Shelf

Internal Frame Shelf

End Frame Shelf

End

Leg

Inte

rnal

Leg

End

Leg

End Shelf

End Shelf

Island Frame Assembly

End Frame Shelf Bolt Location

End

Leg

End Frame Shelf

End

Leg

Inte

rnal

Leg

Inte

rnal

Leg

For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddFor Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 7

INDUSTRIALISLAND

Assembly Guide

Step 7. Glass Shelf InstallationFor glass shelf installation only, install 1x rubber stopper provided with glass shelf, on each connecting plate as shown. Position glass shelf with care.

Step 3. Worktop InstallationTo secure worktop, screw up through connecting plates into your worktop to secure it in place. Screws for attaching to worktop are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for worktop construction are used. Please refer to the specialist worktop supplier if these are required for solid surface worktops.

Island Assembly

Step 6.

Ensure cabinets are located accordingly. Screw through unit into Spacer/Decor End Panel using 30mm screws (K) provided. Screw as shown at top and bottom of unit, away from fittings. Place a cover cap on head of screw to conceal.

K

Decor End

Length to su

it

Spacer

Spacer

Measure and cut appropriately to ensure full cover of bare carcase. Where applicable, scribe Decor End panel to the end of unit. Clamp Decor End panel adjacent to the unit within the frame.

OR

RubberStopper

See customer specific order for requirements.

Front

Step 4. Cabinet InstallationWhere applicable, position door and drawer cabinets in accordance to customer specific frontal thickness. Measure and cut provided spacer panel appropriately.Position flush against internal units at both sides, as shown. Ensure correct positioning of cabinets.

Cabinet

Cabinet

Frtl

THK

Flush

Front

Front

Please ensure steps are followed for a safe installation.

Step 5. Decor Panel Installation

Cabinet Securing using Spacer/Decor Panel