Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Industrial Sheet Rubber,Matting & Specialty Items
Catalog
TM
KSRCA0908
Telephone KOA for widths and lengths not shown� KSRCA0309
IndexNeoprene Sheet ................................................2 - 3
Neoprene Cloth-Inserted Sheet ..............................4
Nitrile Sheet ...........................................................4
FDA White Nitrile Sheet ..........................................5
Black Cloth-Inserted SBR Sheet ...........................5
Black SBR Sheet ....................................................6
Red SBR Sheet (Plate & Fabric Finish) ..................6
Viton® Sheet ............................................................7
Hypalon® Sheet .....................................................7
EPDM Sheet ...........................................................8
Silicone Sheet ........................................................8
Tan Pure Gum Sheet ..............................................9
Red Pure Gum Sheet .............................................9
Black "V" Corrugated Rubber Matting ..................10
Black Wide-Ribbed Premium Rubber Matting ......10
Honeycomb Comfort Matting ................................ 11
60 Durometer Skirtboard ....................................12
48" Wide Skirtboard Rubber ................................12
80 Durometer Skirtboard .....................................13
Channel Rubber Strip ...........................................14
Sheet Rubber Glossary .................................15 - 16
General Properties of Common Polymers ............17
Sheet Rubber Tolerances .....................................17
Storage of Rubber Products .................................18
Minimum Order .....................................................18
Terms & Conditions of Sale ..................................19
TERMS, CONDITIONS AND LIMITED WARRANTY OF SALE ON INSIDE BACK PAGE
NEOPRENE SHEETGeneral Properties of Neoprene†
● Good weather-resistance
● Moderate resistance to petroleum-based fluids
● Good physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:Commercial grade black neoprene sheet, available in four styles:Style N40: 40 Duro hardness (Shore Durometer A)Style N50: 50 Duro hardness (Shore Durometer A)Style N60: 60 Duro hardness (Shore Durometer A)Style N70: 70 Duro hardness (Shore Durometer A)
Polymer: Chloroprene
Common Name: Neoprene
ISO/ASTM Designation: CR
The trademarks contained in this publication are U.S. trademarks of Kuriyama of America, Inc.
All prices and specifications subject to change without notice.
Telephone KOA for widths and lengths not shown3KSRCA0309
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish N40 D�000M�BC407 -�0°Fto+180°F 35-45 900 400% Plate N50 D�000M�BC507 -�0°Fto+180°F 45-55 1,000 400% Plate N60 D�000M�BC607 -�0°Fto+180°F 55-65 1,000 350% Plate N70 D�000M�BC707 -�0°Fto+180°F 65-75 1,000 350% Plate
ORDERING INFORMATION: GaugexWidth Avg.Length Approx. ItemNumber (Inches) (LinearFt./Roll) Wt./Roll N40-02x36x67 1/16"x36" 67ft. 96lbs. N40-04x36x67 1/8"x36" 67ft. 195lbs. N40-06x36x36 3/16"x36" 36ft. 158lbs. N40-08x36x36 1/4"x36" 36ft. 210lbs. N50-02x48x67 1/16"x48" 67ft. 132lbs. N50-04x48x36 1/8"x48" 36ft. 142lbs. N50-06x48x36 3/16"x48" 36ft. 213lbs. N50-08x48x18 1/4"x48" 18ft. 142lbs. N60-01x36x67 1/32"x36" 67ft. 52lbs. N60-02x36x67 1/16"x36" 67ft. 99lbs.
* N60-02x36x100 1/16"x36" 100ft. 147lbs. N60-03x36x67 3/32"x36" 67ft. 149lbs. N60-04x36x67 1/8"x36" 67ft. 198lbs.
* N60-04x36x100 1/8"x36" 100ft. 295lbs. N60-06x36x36 3/16"x36" 36ft. 161lbs.
* N60-06x36x40 3/16"x36" 40ft. 179lbs.
* N60-06x36x50 3/16"x36" 50ft. 223lbs. N60-08x36x36 1/4"x36" 36ft. 214lbs.
* N60-08x36x40 1/4"x36" 40ft. 238lbs.
* N60-08x36x50 1/4"x36" 50ft. 297lbs. N60-12x36x18 3/8"x36" 18ft. 160lbs. N60-16x36x18 1/2"x36" 18ft. 214lbs. N60-24x36x18 3/4"x36" 18ft. 319lbs. N60-32x36x18 1"x36" 18ft. 426lbs. N60-02x48x67 1/16"x48" 67ft. 132lbs.
* N60-02x48x100 1/16"x48" 100ft. 197lbs. N60-03x48x67 3/32"x48" 67ft. 200lbs. N60-04x48x36 1/8"x48" 36ft. 142lbs.
* N60-04x48x50 1/8"x48" 50ft. 197lbs. N60-06x48x36 3/16"x48" 36ft. 213lbs.
* N60-06x48x40 3/16"x48" 40ft. 236lbs.
* N60-06x48x50 3/16"x48" 50ft. 296lbs. N60-08x48x18 1/4"x48" 18ft. 14�lbs.
* N60-08x48x40 1/4"x48" 40ft. 316lbs.
* N60-08x48x50 1/4"x48" 50ft. 394lbs. N60-12x48x18 3/8"x48" 18ft. 213lbs.
* N60-1�x48x30 3/8"x48" 30ft. 355lbs. N60-16x48x18 1/2"x48" 18ft. 284lbs.
* N60-16x48x�5 1/�"x48" �5ft. 394lbs. N60-24x48x18 3/4"x48" 18ft. 425lbs. N60-3�x48x18 1"x48" 18ft. 567lbs. N70-02x48x67 1/16"x48" 67ft. 132lbs. N70-04x48x36 1/8"x48" 36ft. 14�lbs. N70-06x48x36 3/16"x48" 36ft. 213lbs. N70-08x48x18 1/4"x48" 18ft. 14�lbs.
NEOPRENE SHEET
Neoprene (continued)
*NewStockedLengths
Telephone KOA for widths and lengths not shown4 KSRCA0309
General Properties of Neoprene†
● Excellent physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:Commercial grade black neoprene sheet, with nylon reinforcement:Style NCI: 60 Duro hardness (Shore Durometer A)
Polymer: Chloroprene reinforced with 3.4 oz./sq. yd. nylon fabric
Common Name: Nylon-reinforced Neoprene Sheet
ISO/ASTM Designation: CR
NEOPRENE CLOTH-INSERTED
SHEET
ORDERING INFORMATION: Gauge x Width Fabric Avg. Length Approx. Item Number (Inches) Plies (Linear Ft./Roll) Wt./Roll NCI-1P0�x36x67 1/16"x36" 1Ply 67ft. 93lbs. NCI-�P04x36x36 1/8"x36" �Ply 36ft. 98lbs. NCI-�P06x36x36 3/16"x36" �Ply 36ft. 146lbs. NCI-�P08x36x36 1/4"x36" �Ply 36ft. 196lbs.
ASTM Specification Temp. Tensile Strength Style (SI units) Range Ply Durometer (PSI) Finish NCI D�000M�BC607 -�0°Fto+180°F 1 55–65 1100 Plate NCI D�000M�BC607 -�0°Fto+180°F � 55–65 1100 Plate
NOTE: Thisproductisalsoavailablein48"width...contactKuriyamaofAmerica.
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish B60 D�000M5BG607 -30°Fto+�00°F 55–65 1000 350% Plate
ORDERING INFORMATION: Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll B60-01x36x67 1/3�"x36" 67ft. 56lbs. B60-0�x36x67 1/16"x36" 67ft. 100lbs. B60-03x36x67 3/3�"x36" 67ft. 150lbs. B60-04x36x67 1/8"x36" 67ft. �00lbs. B60-06x36x36 3/16"x36" 36ft. 161lbs. B60-08x36x36 1/4"x36" 36ft. �15lbs.
* B60-0�x48x67 1/16"x48" 67ft. 133lbs.
* B60-04x48x67 1/8"x48" 67ft. �66lbs.
* B60-06x48x36 3/16"x48" 36ft. �15lbs.
* B60-08x48x36 1/4"x48" 36ft. �87lbs.
SPECIFICATIONS:Commercial grade black nitrile sheet:Style B60: 60 Duro hardness (Shore Durometer A)
Polymer: Nitrile-Butadiene
Common Name: Nitrile, Buna-N
ISO/ASTM Designation: NBR
NITRILE SHEETGeneral Properties of Nitrile†
● Excellent resistance to petroleum-based fluids
● Good physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
*NewStockedLengths
Telephone KOA for widths and lengths not shown5KSRCA0309
General Properties of Nitrile†
● Excellent resistance to petroleum-based fluids
● Good physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:Food grade white nitrile sheet, made from FDA-approved materials (Title 21 Food and Drug S 177.26000):Style W60: 60 Duro hardness (Shore Durometer A)
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish W60 D�000M1BG608 -31°Fto+�30°F 55–65 1100 400% Plate
ORDERING INFORMATION:
Polymer: Nitrile-Butadiene
Common Name: Nitrile, Buna-N
ISO/ASTM Designation: NBR
Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll W60-0�x36x67 1/16"x36" 67ft. 9�lbs. W60-03x36x67 3/3�"x36" 67ft. 137lbs. W60-04x36x36 1/8"x36" 36ft. 98lbs. W60-06x36x18 3/16"x36" 18ft. 74lbs. W60-08x36x18 1/4"x36" 18ft. 98lbs. W60-0�x48x36 1/16"x48" 36ft. 66lbs. W60-04x48x36 1/8"x48" 36ft. 131lbs. W60-06x48x18 3/16"x48" 18ft. 98lbs. W60-08x48x18 1/4"x48" 18ft. 131lbs.
General Properties of SBR†
● Excellent physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:Commercial grade black SBR sheet, with cloth reinforcement:Style CI: 60 Duro hardness (Shore Durometer A)
Polymer: Styrene-Butadiene Rubber reinforced with 3.4 oz./sq. yd. nylon fabric
Common Name: Cloth-reinforced Black Rubber Sheet
ISO/ASTM Designation: SBR
ASTM Specification Temp. Tensile Strength Style (SI units) Range Ply Durometer (PSI) Finish CI D�000M�AA603 -�0°Fto+170°F 1 55–65 600 Plate CI D�000M�AA603 -�0°Fto+170°F � 55–65 600 Plate CI D�000M�AA603 -�0°Fto+170°F 3 55–65 600 Plate CI D�000M�AA603 -�0°Fto+170°F 4 55–65 600 Plate
ORDERING INFORMATION: Gauge x Width Fabric Avg. Length Approx. Item Number (Inches) Plies (Linear Ft./Roll) Wt./Roll CI-1P0�x48x67 1/16"x48" 1Ply 67ft. 13�lbs. CI-1P04x48x36 1/8"x48" 1Ply 36ft. 140lbs. CI-�P04x48x36 1/8"x48" �Ply 36ft. 140lbs. CI-�P06x48x18 3/16"x48" �Ply 18ft. 107lbs. CI-�P08x48x18 1/4"x48" �Ply 18ft. 140lbs. CI-3P06x48x18 3/16"x48" 3Ply 18ft. 107lbs. CI-4P08x48x18 1/4"x48" 4Ply 18ft. 140lbs.
FDA WHITE NITRILE SHEET
BLACK CLOTH-INSERTED
SBR SHEET
Telephone KOA for widths and lengths not shown6 KSRCA0�08
General Properties of SBR†
● Good physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
General Properties of SBR†
● Good physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
BLACK SBR SHEET
SPECIFICATIONS:Commercial grade black SBR sheet:Style BL60: 65 Duro hardness (Shore Durometer A)
Polymer: Styrene-Butadiene
Common Name: Black Rubber Sheet
ISO/ASTM Designation: SBR ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish BL60 D�000M1AA604 -13°Fto+158°F 60–70 600 �00% Plate
ORDERING INFORMATION: Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll BL60-0�x48x67 1/16"x48" 67ft. 131lbs. BL60-04x48x36 1/8"x48" 36ft. 140lbs. BL60-08x48x18 1/4"x48" 18ft. 140lbs.
ORDERING INFORMATION: Gauge x Item Number Width Avg. Length Approx.
Plate Fabric (Inches) (Linear Ft./Roll) Wt./Roll Finish Impression R75-0�x36x67 RF75-0�x36x67 1/16"x36" 67ft. 106lbs. R75-04x36x36 RF75-04x36x36 1/8"x36" 36ft. 114lbs. R75-06x36x36 RF75-06x36x36 3/16"x36" 36ft. 171lbs. R75-08x36x18 RF75-08x36x18 1/4"x36" 18ft. 114lbs. R75-0�x48x67 RF75-0�x48x67 1/16"x48" 67ft. 141lbs. R75-03x48x67 RF75-03x48x67 3/3�"x48" 67ft. �11lbs. R75-04x48x36 RF75-04x48x36 1/8"x48" 36ft. 15�lbs. R75-06x48x36 RF75-06x48x36 3/16"x48" 36ft. ��8lbs. R75-08x48x18 RF75-08x48x18 1/4"x48" 18ft. 15�lbs.
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish R75 D�000M1AA705 -��°Fto+158°F 65–75 600 �00% Plate RF75 D�000M1AA705 -��°Fto+158°F 65–75 600 �00% Fabric Impression
SPECIFICATIONS:Commercial grade red SBR sheet, Plate or Fabric Finish:
Polymer: Styrene-Butadiene
Common Name: Red Rubber Sheet
ISO/ASTM Designation: SBR
Meets D1330 Grade 1Style R75: 70 Duro hardness (Shore Durometer A) Style RF75: 70 Duro hardness (Shore Durometer A)
RED SBR SHEETPlate & Fabric Finish
Telephone KOA for widths and lengths not shown7KSRCA0309
SPECIFICATIONS:HYPALON® rubber sheet:Style HY60: 60 Duro hardness (Shore Durometer A)
Polymer: Chlorosulphonated Polyethylene
Common Name: Hypalon
ISO/ASTM Designation: CSM
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish HY60 D�000M1CE614 -31°Fto+�57°F 55–65 1400 350% Plate
ORDERING INFORMATION:
General Properties of HYPALON®
● Excellent resistance to oxidation and outstanding resistance to strong sunlight and ozone.
● Good resistance to general acids, oils and greases.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
Note: HYPALON® is a registered trademark of DuPont Dow Elastomers.
HYPALON® SHEET
SPECIFICATIONS:Commercial grade black VITON® sheet:Style VI70: 72 Duro hardness (Shore Durometer A)
Polymer: Hexaflouropropylene Vinylidene Flouride
Common Name: Viton
ISO/ASTM Designation: FKM
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish VI70 D�000M1HK704 -14°Fto+48�°F 7� 600 165% Plate
Note: VITON® is a registered trademark of DuPont Dow Elastomers.
VITON® SHEET
General Properties of VITON®
● Excellent resistance to many concentrated acids.
● Excellent resistance to heat.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
ORDERING INFORMATION: Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll VI70-01x36x30 1/3�"x36" 30ft. �9lbs.
*VI70-0�x36x10 1/16"x36" 10ft. 19lbs. VI70-0�x36x30 1/16"x36" 30ft. 58lbs.
*VI70-03x36x10 3/3�"x36" 10ft. �8lbs. VI70-03x36x30 3/3�"x36" 30ft. 85lbs.
*VI70-04x36x10 1/8"x36" 10ft. 37lbs.
*VI70-04x36x15 1/8"x36" 15ft. 55lbs. VI70-04x36x30 1/8"x36" 30ft. 110lbs.
*VI70-06x36x10 3/16"x36" 10ft. 57lbs. VI70-06x36x30 3/16"x36" 30ft. 170lbs.
*VI70-08x36x10 1/4"x36" 10ft. 74lbs.
*VI70-08x36x15 1/4"x36" 15ft. 111lbs. VI70-08x36x30 1/4"x36" 30ft. ���lbs.
*NewStockedLengths
Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll HY60-0�x36x67 1/16"x36" 67ft. 88lbs. HY60-04x36x67 1/8"x36" 67ft. 176lbs. HY60-06x36x36 3/16"x36" 36ft. 14�lbs. HY60-08x36x36 1/4"x36" 36ft. 190lbs.
Telephone KOA for widths and lengths not shown8 KSRCA0�08
General Properties of Silicone†
● Excellent resistance to heat.
● Good physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:Commercial grade red silicone sheet:Style SIL60: 60 Duro hardness (Shore Durometer A)
Polymer: Polydimethysiloxane
Common Name: Silicone
ISO/ASTM Designation: FE
SILICONE SHEET
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish SIL60 D�000M�FE607B37-94°Fto+39�°F 55–65 1100 300% Plate
ORDERING INFORMATION: Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll SIL60-01x36x35 1/3�"x36" 35ft. ��lbs. SIL60-0�x36x35 1/16"x36" 35ft. 44lbs. SIL60-03x36x35 3/3�"x36" 35ft. 67lbs. SIL60-04x36x35 1/8"x36" 35ft. 89lbs. SIL60-06x36x35 3/16"x36" 35ft. 133lbs. SIL60-08x36x35 1/4"x36" 35ft. 178lbs. SIL60-01x48x35 1/3�"x48" 35ft. 30lbs. SIL60-0�x48x35 1/16"x48" 35ft. 59lbs. SIL60-03x48x35 3/3�"x48" 35ft. 89lbs. SIL60-04x48x35 1/8"x48" 35ft. 118lbs. SIL60-06x48x35 3/16"x48" 35ft. 178lbs. SIL60-08x48x35 1/4"x48" 35ft. �37lbs.
General Properties of EPDM†
● Good ozone, chemical and aging resistance
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish E60 D�000M�BA608 -�0°Fto+�30°F 55–65 1100 350% Plate
Polymer: Ethylene-Propylene-Diene-Monomer
Common Name: Ethylene-Propylene Rubber
ISO/ASTM Designation: EPDM
Commercial grade black EPDM sheet:Style E60: 60 Duro hardness (Shore Durometer A)
SPECIFICATIONS:
EPDM SHEET
ORDERING INFORMATION: Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll E60-0�x36x67 1/16"x36" 67ft. 9�lbs. E60-04x36x67 1/8"x36" 67ft. 183lbs. E60-06x36x36 3/16"x36" 36ft. 148lbs. E60-08x36x36 1/4"x36" 36ft. 197lbs. E60-0�x48x67 1/16"x48" 67ft. 1��lbs. E60-04x48x67 1/8"x48" 67ft. �44lbs. E60-06x48x36 3/16"x48" 36ft. 197lbs. E60-08x48x36 1/4"x48" 36ft. �63lbs.
Telephone KOA for widths and lengths not shown9KSRCA0�08
RED PURE GUM SHEET
General Properties of Red Gum†
● Excellent physical properties
● High abrasion-resistance
● Good resilience
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:Red pure gum rubber sheet:Style RG45: 45 Duro hardness (Shore Durometer A)
Polymer: Isoprene rubber (natural)
Common Name: Natural Rubber Sheet
ISO/ASTM Designation: NR
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish RG45 D�000M1AA414 -40°Fto+185°F 40–50 �400 600% Plate
ORDERING INFORMATION: Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll RG45-1�x48x�5 3/8"x48" �5ft. �05lbs. RG45-16x48x�5 1/�"x48" �5ft. �73lbs. RG45-�4x48x�5 3/4"x48" �5ft. 410lbs. RG45-3�x48x�5 1"x48" �5ft. 546lbs.
General Properties of Pure Gum†
● Excellent physical properties
● Excellent abrasion-resistance
● Excellent low temperature resistance
● Good resistance to most acids
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:Tan pure gum rubber sheet:Style GF40: 40 Duro hardness (Shore Durometer A)
Polymer: Isoprene rubber (natural)
Common Name: Natural Rubber Sheet
ISO/ASTM Designation: NR
TAN PURE GUM SHEET
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish GF40 D�000M1AA4�4 -40°Fto+176°F 35–45 3400 600% Plate
ORDERING INFORMATION: Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll GF40-0�x36x67 1/16"x36" 67ft. 65lbs. GF40-04x36x67 1/8"x36" 67ft. 131lbs. GF40-06x36x67 3/16"x36" 67ft, 196lbs. GF40-08x36x36 1/4"x36" 36ft. 140lbs. GF40-1�x36x36 3/8"x36" 36ft. �11lbs. GF40-16x36x18 1/�"x36" 18ft. 140lbs. GF40-�4x36x18 3/4"x36" 18ft. �11lbs. GF40-3�x36x18 1"x36" 18ft. �81lbs. GF40-0�x48x67 1/16"x48" 67ft. 87lbs. GF40-04x48x36 1/8"x48" 36ft. 94lbs. GF40-06x48x36 3/16"x48" 36ft. 140lbs. GF40-08x48x18 1/4"x48" 18ft. 94lbs.
Telephone KOA for widths and lengths not shown10 KSRCA0�08
BLACK “V” CORRUGATED RUBBER MATTING
Provides floor protection in entrances and hallways in offices and plants. "V" corrugation allows for easy cleaning.
SPECIFICATIONS:Blended SBR/Natural Rubber
ORDERING INFORMATION: Gauge x Width Temp. Average Length Approx. Item Number (Inches) Range (Linear Ft./Roll) Wt./Roll MAT-04X�4X75 1/8"X�4" -13°Fto+158°F 75ft. 101lbs. MAT-04X36X75 1/8"X36" -13°Fto+158°F 75ft. 15�lbs. MAT-04X48X75 1/8"X48" -13°Fto+158°F 75ft. �03lbs.
ORDERING INFORMATION: Gauge x Width Temp. Average Length Approx. Item Number (Inches) Range (Linear Ft./Roll) Wt./Roll EZMAT-04X�4X75 1/8”X�4” -13°Fto+158°F 75Ft. 111lbs. EZMAT-04X36X75 1/8”X36” -13°Fto+158°F 75Ft. 167lbs. EZMAT-04X48X75 1/8”X48” -13°Fto+158°F 75Ft. ���lbs.
Made with a blend of SBR/Natural Rubber for tough, long lasting service.
This premium wide-ribbed rubber matting is ideal for many uses:■ Factory work stations ■ Hallway runners■ Protective covering for carpets
BLACK WIDE-RIBBED PREMIUM RUBBER
MATTING
Features:■ Easy to maintain
■ Easy to clean: ★Wet Mop ★Household Broom ★Garden Hose ★Vacuum Cleaner
Telephone KOA for widths and lengths not shown11
HONEYCOMB COMFORT MATTING
General Properties of Nitrile†
● Excellent resistance to petroleum-based fluids
● Good physical properties.
General Properties of SBR†
● Good physical properties.
† Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.
Black Comfort Matting:Polymer: Styrene-ButadieneCommon Name: Black RubberISO/ASTM Designation: SBR
Red Comfort Matting:Polymer: Nitrile-ButadieneCommon Name: Nitrile, Buna-NISO/ASTM Designation: NBR
SPECIFICATIONS:Hardness: 55 Duro hardness (Shore Durometer A)
Tensile Strength: 240 PSI
Elongation: 300%
Cold Resistance: -20° F.
Colors Available:
Black — SBR Red — Nitrile (Oil Resistant)
Gauge Approx. Weight Item No. Thickness Size per Piece BLKHCMAT-3X3 5/8” 3’X3’ 16lbs.REDHCMAT-3X3 5/8” 3’X3’ 16lbs.
Honeycomb pattern provides non-slip surface . . . allows water to drain off.
KSRCA0�08
Telephone KOA for widths and lengths not shown1� KSRCA0�08
General Properties of Skirtboard Rubber● Excellent abrasion-resistance
● Excellent weather-resistance
SKIRTBOARD RUBBER
ORDERING INFORMATION:
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish SK60 D�000M1AA608 -��°Fto+158°F 55–65 1100 400% Plate
PACKAGING: 50 Ft. Rolls
Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll SK60-08x3x50 1/4"x3" 50ft. �3lbs. SK60-08x4x50 1/4"x4" 50ft. 30lbs. SK60-08x5x50 1/4"x5" 50ft. 38lbs. SK60-08x6x50 1/4"x6" 50ft. 45lbs. SK60-08x8x50 1/4"x8" 50ft. 61lbs. SK60-08x10x50 1/4"x10" 50ft. 76lbs. SK60-08x1�x50 1/4"x1�" 50ft. 91lbs. SK60-1�x3x50 3/8"x3" 50ft. 34lbs. SK60-1�x4x50 3/8"x4" 50ft. 45lbs. SK60-1�x5x50 3/8"x5" 50ft. 57lbs. SK60-1�x6x50 3/8"x6" 50ft. 68lbs. SK60-1�x8x50 3/8"x8" 50ft. 91lbs. SK60-1�x10x50 3/8"x10" 50ft. 114lbs. SK60-1�x1�x50 3/8"x1�" 50ft. 136lbs. SK60-16x3x50 1/�"x3" 50ft. 45lbs. SK60-16x4x50 1/�"x4" 50ft. 61lbs. SK60-16x5x50 1/�"x5" 50ft. 76lbs. SK60-16x6x50 1/�"x6" 50ft. 91lbs. SK60-16x8x50 1/�"x8" 50ft. 1�1lbs. SK60-16x10x50 1/�"x10" 50ft. 151lbs. SK60-16x1�x50 1/�"x1�" 50ft. 18�lbs. SK60-�4x3x50 3/4"x3" 50ft. 68lbs. SK60-�4x6x50 3/4"x6" 50ft. 136lbs. SK60-�4x8x50 3/4"x8" 50ft. 18�lbs. SK60-�4x9x50 3/4"x9" 50ft. �05lbs. SK60-�4x10x50 3/4"x10" 50ft. ��7lbs. SK60-�4x1�x50 3/4"x1�" 50ft. �73lbs. SK60-3�x3x50 1"x3" 50ft. 91lbs. SK60-3�x6x50 1"x6" 50ft. 18�lbs. SK60-3�x8x50 1"x8" 50ft. �4�lbs. SK60-3�x10x50 1"x10" 50ft. 303lbs. SK60-3�x1�x50 1"x1�" 50ft. 363lbs. SK60-48x10x50 11/�"x10" 50ft. 455lbs.
48"WideSkirtboardRubberSheet SK60-08x48x50 1/4"x48" 50ft. 363lbs. SK60-1�x48x50 3/8"x48" 50ft. 545lbs. SK60-16x48x50 1/�"x48" 50ft. 7�7lbs. SK60-�4x48x50 3/4"x48" 50ft. 1090lbs. SK60-3�x48x50 1"x48" 50ft. 1454lbs.
Polymer: Styrene-Butadiene and Isoprene Rubber, Natural
Color: Black
Common Name: Skirtboard Rubber
ISO/ASTM Designation: SBR/NR
SPECIFICATIONS:Blended SBR/NR slit sheet, Plate Finish:Style SK60: 60 Duro hardness (Shore Durometer A)
Telephone KOA for widths and lengths not shown13KSRCA0�08
General Properties of 80 Durometer Skirtboard Rubber● Excellent abrasion-resistance
● Excellent weather-resistance
80 DUROMETER SKIRTBOARD
ORDERING INFORMATION:
ASTM Specification Temp. Tensile Strength Elongation Style (SI units) Range Durometer (PSI) (%) Finish SK80 D�000M1AA80� -��°Fto+158°F 75–85 600 �00% Plate
PACKAGING: 50 Ft. Rolls
Gauge x Width Avg. Length Approx. Item Number (Inches) (Linear Ft./Roll) Wt./Roll SK80-16x4x50 1/�"x4" 50ft. 61lbs. SK80-16x6x50 1/�"x6" 50ft. 91lbs. SK80-16x8x50 1/�"x8" 50ft. 1�1lbs. SK80-�4x6x50 3/4"x6" 50ft. 137lbs. SK80-�4x8x50 3/4"x8" 50ft. 18�lbs. SK80-3�x6x50 1"x6" 50ft. 18�lbs. SK80-3�x8x50 1"x8" 50ft. �43lbs. SK80-3�x10x50 1"x10" 50ft. 303lbs. SK80-3�x1�x50 1"x1�" 50ft. 364lbs.
Common Name: Skirtboard Rubber
ISO/ASTM Designation: NR
Tensile Strength: 600 PSI
Elongation: 200%
SPECIFICATIONS:Blended NR slit sheet, Plate Finish:Style SK80: 80 Duro hardness (Shore Durometer A)
Polymer: Natural and Synthetic Rubber
Color: Black
Applications:Slit to width for Belt Wipers, Snow Plow Blades and Squeegee use.
Telephone KOA for widths and lengths not shown14
This channel rubber strip is ideal for use as a protective edge on shaker screens and a variety of other types of industrial equipment.
SPECIFICATIONS:Commercial grade black EPDM channel:Hardness: 65 Duro hardness (Shore Durometer A)
Tensile Strength: 1,650 PSI
Elongation: 310%
STYLE RTCHNL STYLE THCHNL STYLE HFTCHNL Round Top Tapered Hex Hex Flat Top Flat Top
CHANNEL RUBBER STRIP
KSRCA0�08
B
C
D
A
B
C
D
A
B
C
D
A
ORDERING INFORMATION: Channel Size Roll Length Approx. Item Number (Inches) Linear Ft. Wt./Roll RTCHNL-04X�00 1/4” �00 50lbs. RTCHNL-06X�00 3/8” �00 70lbs. RTCHNL-08X100 1/�” 100 51lbs. RTCHNL-1�X100 3/4" 100 70lbs. THCHNL-04X�00 1/4” �00 44lbs. THCHNL-06X�00 3/8” �00 64lbs. THCHNL-08X100 1/�” 100 48lbs. THCHNL-1�x100 3/4" 100 6�lbs. HFTCHNL-04X�00 1/4” �00 34lbs. HFTCHNL-06X�00 3/8” �00 4�lbs. HFTCHNL-08X100 1/�” 100 44lbs. HFTCHNL-1�X100 3/4" 100 40lbs.
Standard Round Top Channel DIMENSION Size A B C D Item Number (Inches) RTCHNL-04X�00 1/4” .�5 .81 .44 .56 RTCHNL-06X�00 3/8” .38 1.00 .50 .50 RTCHNL-08X100 1/�” .50 1.�5 .56 .63 RTCHNL-1�X100 3/4" .75 1.�0 .63 1.40
Tapered Hex-Flat Top Channel DIMENSION Size A B C D Item Number (Inches) THCHNL-04X�00 1/4” .�5 .65 .38 .63 THCHNL-06X�00 3/8” .38 .85 .50 .63 THCHNL-08X100 1/�” .50 1.�0 .50 .69 THCHNL-1�X100 3/4" .75 1.45 .50 .75
Hex-Flat Top Channel DIMENSION Size A B C D Item Number (Inches) HFTCHNL-04X�00 1/4” .�5 .75 .31 .38 HFTCHNL-06X�00 3/8” .38 .88 .31 .44 HFTCHNL-08X100 1/�” .50 1.00 .44 .50 HFTCHNL-1�X100 3/4" .75 1.�5 .50 .63
KSRCA0�08 15
SHEET RUBBER GLOSSARYAdhesion:(1)Basically,theadhering,clinging,bondingorstickingoftwomaterialsurfacestooneanother,suchasrubbertorubber,rubbertoglass,rubbertometal,rubbertowood,rubbertofabric,rubbertocord,rubbertowire,etc.(�)Referstothestrengthofbondbetweencuredrubbersurfacesorcuredrubbersurfaceandanon-rubbersurface.
Aging:Toundergochangestophysicalpropertieswithageorlapseoftime.
Aging, Air Oven: Ameansofacceleratingthechangeinphysicalpropertiesofrubbercompoundsbyexposingthemtotheactionofairatanelevatedtemperature.
Ambient Temperature: Theenvironmenttemperaturesurroundingtheobjectunderconsideration.
Blemish:Amark,deformity,orinjurywhichimpairstheappearance.
Blisters:Araisedspotonthesurfaceoraseparationbetweenlayersusuallyformingavoidorair-filledspaceinthevulcanizedarticle.(Seebubbles,sinksandvoids.)
Bloom:Acoatingorefflorescencecreatingadiscolorationorchangeinappearanceofthesurfaceofarubberproductcausedbythemigrationofaliquidorsolidtothesurface.Examples:SulfurBloom,WaxBloom.Nottobeconfusedwithdustonthesurfacefromexternalsources.
Calendered:Continuouslysheetedorplieduprubbercompoundorfabricthatisfrictionedorcoatedwithrubbercompoundonamachineequippedwiththreeormoreheavyinternallyheatedorcooledrollsrevolvinginoppositedirection.
Checking:Short,shallowcracksonthesurface,generallyduetoeffectofdestructiveactionofenvironmentalconditions.
C. I. (Cloth-inserted):Anabbreviationusedtoindicateasheetofrubbercontainingoneormorepliesofclothorduck,inwhichtheclothiscompletelycoveredwithrubber.
Cloth Impression:Sameasfabricimpression.
Coating:Alayerofmaterialcoveringasurface.
Compression Set: Thedeformationwhichremainsinrubberafterithasbeensubjectedtoandreleasedfromaspecificcompressivestressforadefiniteperiodoftimeataprescribedtemperature.Compressionsetmeasurementsaremadeforthepurposeofevaluatingthe
creepandstressrelaxationpropertiesofrubber.
Cracking:Asharpbreakorfissureinthesurface.Generallyduetoexcessivestrain.
Crazing:Asurfaceeffectonrubberarticlescharacterizedbymultitudinousminutecracks.
Cure:Theactofvulcanization.
Curing Temperature: Thetemperatureatwhichtherubberisvulcanized.
Diaphragm Sheet:Sheet(generallyfabric-reinforcedrubber)fromwhichflatdiaphragmsmaybecut.
Die Cut:Shapedarticlespunchedfromasheetofrubberwithadie.
Dielectric Strength:Themeasureofelectricpotentialstrengthofarubberproduct.Measureofitsabilityasaninsulatingcompoundtoresistpassageofadisruptivedischargeproducedbyanelectricstress.Measureasvoltspermilofthickness.
Durometer:Aninstrumentformeasuringthehardnessofrubber.Measuresresistancetothepenetrationofanindentorpointintothesurfaceoftherubber.
Durometer Hardness:Anarbitrarynumericalvaluewhichmeasurestheresistancetopenetrationoftheindentorpointofthedurometer.Valuemaybetakenimmediatelyorafteraveryshortspecifiedtime.
Elastomer:Macromolecularmaterialthatreturnsrapidlytoapproximatelytheinitialdimensionsandshapeaftersubstantialdeformationbyaweakstressandreleaseofstress.
Elongation: Increaseinlengthexpressednumericallyasafractionorpercentageofinitiallength.
Filler:(1)Amaterialincorporatedintoarubbercompoundtoincreaseitsbulk.(�)Acompoundbuiltintoarubberproducttoincreaseitsbulkand/orimproveitsappearance.(3)Sometimeserroneouslyusedtomean“filling”intextiles.
Finish, Fabric:Sameasimpress,fabric.
Finish, Paper:Finishresultingfromcuringincontactwithpaper.
Finish Plate or Platen:Sameasplatefinish(sheet).
Foreign Material:Anyextraneousmattersuchaswood,paper,metal,sand,dirtorpigmentthatshouldnotnormallybepresentinaparticularrubberproductorcomposition.
KSRCA040616
SHEET RUBBER GLOSSARYGauge:(1)Themeasureofthicknessoftheindividualelementsmakinguparubberproduct.(�)Adeviceformeasuring.(Seethickness.)
Grain:Theeffectonarubbercompoundduetoprocessingitthroughatubingmachine,calender,ormill.
Hardness:Propertyorextentofbeinghard.Measuredbyextentoffailureoftheindentorpointofanyoneofanumberofstandardhardnesstestinginstrumentstopenetratetheproduct.
Homogeneity:Uniformityofcompositionthroughoutthematerial.
Homogeneous:Ofuniformcompositionthroughout.
Impression:Designformedduringvulcanizationinthesurfaceofanyrubberarticlebyamethodoftransfer,suchasfabricimpressionormoldedimpression.
Impression, Fabric:Impressionformedduringcurebyfabricwrap.
Laminated:Builtupfromthinnerlayers.
Modulus:Inthephysicaltestingofrubber,itistheratioofstresstostrain;thatis,theloadinpoundspersquareinchorkilogramspersquarecentimeterofinitialcrosssectional-areanecessarytoproduceastatedpercentageelongation.Itisameasureofstiffness.
Non-blooming:Theabsenceofbloom.
Oxidation:Thereactionofoxygenonarubberproduct,usuallydetectedbyachangeintheappearanceorfeelofthesurface,orbyachangeinphysicalproperties
Ozone Cracking:Surfacecracks,checksorcrazingcausedbyexposuretoanatmospherecontainingozone.(Seealsoozoneresistant.)
Ozone Resistant:Withstandsthedeterioratingeffectsofozone,generallycracking.
Plate Finish (Sheet):Acommerciallysmoothsurface,theusualresultofvulcanizationbetweenpressplates(platens).
Ply:(1)Alayerofrubberizedfabric.(�)Alayerconsistingofmultiplestrandsofcordorwireclosespaced.(3)Asingleyarninacompositeyarn.(4)Usedinprocessingasalayerofunvulcanizedrubbercompound.
Polymer:Averylongchainofunitsofmono-mers,preparedbymeansofanadditionand/or
condensationpolymerization.Theunitsmaybethesameofdifferent.Therearecopolymers,di-polymers,triorterpolymers,quadri-polymers,highpolymers,etc.NaturalrubberisapolymerofIsoprene.
Press Length:Thelengthofaproductwhichcanbevulcanizedatonetimeinapress,limitedtothelengthmeasurementofthepress.
Random Length:Aunitofmaterialwhichdoesnotfallintoanycurrentclassificationforstandardlength.
Relative Humidity:Therationofthequantityofwatervaporactuallypresentintheatmospheretothegreatestamountpossibleatthegiventemperature.
Roll:Sheetrubberandgasketmaterialofauniformwidthrolleduponitselffromwhichgasketsandotherproductsoflesserdimensionsandvariousshapesmaybecut.
Rubber:Amaterialthatiscapableofrecoveringfromlargedeformationsquicklyandforcibly,andcanbe,oralreadyis,modifiedtoastateinwhichitisessentiallyinsoluble(butcanswell)inboilingsolvent,suchasbenzene,methylethylketone,andethanol-tolueneazeotrope.
Sinks:Acollapsedblisterorbubbleleavingadepressionintheproduct.
Slab:Thicksheet,generallylaminated.
Specific Gravity:Theratiooftheweightofagivensubstancetotheweightofanequalvolumeofwaterataspecifiedtemperature.
Tacky (Rubber Surface):Tendingtoadhere.
Tensile Strength:Themaximumtensilestressappliedduringstretchingaspecimentorupture.
Viscosity:Amanifestationofinternalfrictionopposedtomobility.Thepropertyoffluidsandplasticsolidsbywhichtheyresistaninstanta-neouschangeofshape,i.e.,resistanttoflow.
Volume Swell:Increaseinphysicalsizecausedbytheswellingactionofaliquid.
Vulcanization:Actorprocessoftreatinganelastomerorcompoundofsametoimproveitsusefulproperties,usuallyaccomplishedbyapplicationofheat.
Warp:Theyarnsthatrunlengthwiseinawovenfabric.
Waft: Thecrosswisethreadsinafabric;fillingthreads.Thethreadsoryarnsrunningatrightangletothewarp.
KSRCA0�08 17
General properties of common polymers used in sheet rubber
Sheet Rubber Tolerances(Tolerances conform to RMA standards, Durometer ± 5 points.)
Thickness Tolerance
1/32" but not including 1/16" .........................± .012"
1/16" but not including 1/8" ...........................± .016"
1/8" but not including 3/16" ...........................± .020"
3/16" but not including 3/8" ...........................± .031"
3/8" but not including 9/16" ...........................± .047"
Thickness Tolerance
9/16" but not including 3/4" ...........................± .062"
3/4" but not including 1" ................................± .094"
1" and Over ..................................................... ± 10%
Width Tolerance
36" and over ..................................................± 1.00"
Neoprene Nitrile EPDM SBR CI Pure Gum Silicone Viton HypalonHeat Aging Good Good Excellent Good Good Good Excellent Excellent GoodAbrasion Resistance Excellent Excellent Very Good Good Good Excellent Poor Fair FairCompression Set Fair Fair Fair Good Good Good Fair Good GoodResilience Excellent Good Good Good Good Outstanding Fair Fair FairTear Good Good Good Fair Good Good Good Fair FairFlame Resistance Excellent Poor Very Poor Very Poor Very Poor Very Poor Fair Good GoodWeathering Very Good Fair Excellent Fair Fair Fair Good Excellent ExcellentOzone Resistance Very Good Very Poor Good Fair Fair Poor Good Excellent ExcellentGas Permeability Good Good Good Good Good Good Poor Poor Poor ResistanceOil Resistance Good Very Good Very Poor Poor Poor Very Poor Fair Good Fair Gas Resistance Good Excellent Very Poor Poor Poor Very Poor Poor Poor PoorAcid Resistance Good Good Good Fair Fair Good Poor Good GoodAlkali Resistance Good Good Good Fair Fair Good Poor Good Good
TAKE NOTE!The general properties shown in the chart above are not intended to be used to make final choices for a specific application. Exposure to heat, sunlight, chemicals, ozone and oils, as well as pressure, tension, binding, stretching and folding, will affect the performance of a rubber product.
Suitability must be determined by a qualified person. See Cautionary Statement on the next page.