Industrial Rolled Copper and Copper Alloy Products DIVISON/4 Ind… · Industrial Rolled Copper and Copper Alloy Products. 4 2 ... (EN, DIN, ASTM, BS, ... manufactured to EN 1652

KM

E G

erm

any

Gm

bH &

Co.

KG

Cop

per

and

Cop

per

Allo

y Pr

oduc

ts

[GB]

Industrial RolledCopper and Copper Alloy Products

4

2

KME Germany GmbH & Co. KGKME and copper

Our modern world would be impossible without copper: electricity, air conditioning, refrigeration, traffic and digital media technology have become part of our daily lives and owe much of their widespread success to the consistent use of the raw material copper. Copper has become indispensable in technological development, and its importance as a state-of-the-art raw material is unchallenged.

KME Germany GmbH & Co. KG with its production sites in Osnabrück and Menden manufactures Standard Products for the building and rolled industry and also in Osnabrück Special Products for industrial applications. The precise definition of mechanical properties such as high electrical con-ductivity or narrow production tolerances are essential for industrial use.

KME Germany GmbH & Co. KG — Copper and Copper Alloy Products2

Rolled Products for industrial applications

At KME, copper and copper-alloy rolled material is tailor-made in quantity to customer specifications. In addition to strips, sheets, plates and blanks for industrial use, KME Germany GmbH & Co. KG in Osnabrück also manufactures special strips needed for the production of cables and transformers. Many industrial sectors use KME's rolled products, which include the electric and electronics industries, the automotive and semiconductor industry, the mechanical engineering industry and for metal working. KME rolled products comply fully with the main international standards (EN, DIN, ASTM, BS, AFNOR etc.)

KME Germany GmbH & Co. KG — Copper and Copper Alloy Products 3

KME is one of the leading manufacturers of copper and copper-alloy strips. Copper strips are produced to EN 1652 and EN 13599, to tighter tolerances than those stated in the EN standards. KME offers various alloys / types of copper, all with a minimum 99.9% purity.

Copper Strips


Surfacesbarehot-dip tinnedgalvanic tin-plated (with/without reflow)special KME tin coatings with specific propertiesprofiled strips(thicknesses: 0.18 - 1.00 mm; widths: 15 - 90 mm)Other surface finishes on request.

Dimensions CoilsWidth

mmThickness

mmInner diamter of the coil

mmMax.

coil weight

10 – 400 0.10 – 2.00 150/300/400 12 kg/mm

15 – 700 0.20 – 1.60 300/400/500/600 12 kg/mm

50 – 1,220 0.40 – 4.00 400/600 12 kg/mm

100 – 680 3.00 – 4.00 400/600 12 kg/mm

700 – 1,220 0.20 – 2.00 500/600 12 kg/mm

Other dimensions, coil weights and inner diameter of coil upon request.

Materials DIN EN CEN ASTM JIS

Cu-ETP (E-Cu) CW004A C11000 C1100

Cu-HCP (SE-Cu) CW021A C10300 –

Cu-DHP (SF-Cu) CW024A C12200 C1220

Cu-OFE (OF-Cu) CW009A C10100 C1010

Possible coil weights: 3 to 12 kg/mm range.

Delivery Formssingle coilscoils, layer / traverse wound, plastic or iron drumsCoil weight 300 - 1500 kgTECSTRIP®_multicoil (thicknesses: 0.15 - 0.80 mm; widths: 15 - 50 mm)

KME Germany GmbH & Co. KG — Copper and Copper Alloy Products 5

MaterialsDIN EN CEN ASTM JIS

CuZn5 CW500L C21000 C2100

CuZn10 CW501L C22000 C2200

CuZn15 CW502L C23000 C2300

CuZn20 CW503L C24000 C2400

CuZn30 CW505L C26000 C2600

CuZn33 CW506L C26800 C2680

CuZn36 CW507L C27200 -

CuZn37 CW508L C27400 C2740

Other brass products on request.

Surfacesbarehot-dip-tinnedgalvanic tin-plated (with/without reflow)silver platednickel platedselectively platedprofiledPVC - coated

Delivery FormsStripsDimensions Minimum MaximumWidth 8 mm 1010 mmThickness 0.10 mm 5.00 mm PlatesDimensions Minimum MaximumThickness 0,20 mm 175 mmWidth 500 mm 1000 mmLength 500 mm 4000 mmStandard 1000 x 2000 mmFurther dimensions / sizes on request.

DiscsDimensions Minimum MaximumDiameter 50 mm 1030 mmThickness 0.30 mm 3.00 mmBelow Ø 100 mm on request.

Strips / Plates / Discs:Some combinations of thickness, width and diameter are not feasible. Please consult us for more details.

Coil DesignStripsWeight (kg/mm width): approx. 1.5/3/6/12 kg/mm strip widthapprox. 2.5/5/10 kg/mm strip width

Inner diameter of coil: 100, 300, 400, 500 mmOther coil dimensions on request.

Traverse wound strips:Drum weights: 500 - 1500 kgWooden, plastic and metal drumsWidth: 8 - 50 mmThickness: 0.2 - 1.5 mm

6 KME Germany GmbH & Co. KG — Copper and Copper Alloy Products

Brass is probably the most well-known of all copper alloys. Varying the composition of copper and zinc creates different types of material which are specifically geared to meeting particular demands. At KME, brass products are made in a wide variety of alloys, manufactured to EN 1652 and EN 1654, to tighter tolerances than those stated in the EN standards.

Brass Rolled Products

7KME Germany GmbH & Co. KG — Copper and Copper Alloy Products

KME produces high-quality alloyed bronze strips according to EN 1652 and EN 1654 and with much narrower tolerances those specified in the EN standard.

Bronze Strips


Surfacesbarehot-dip-tinnedgalvanic tin-plated (with/without reflow)special KME tin coatings with specific propertiesprofiled strips(thicknesses: 0.18 - 1.00 mm; widths: 15 - 90 mm)Other surface finishes on request.

Delivery Formssingle coilscoils, layer / traverse wound, plastic or iron drumsCoil weight 300 - 1500 kgTECSTRIP®_multicoil (thicknesses: 0.15 - 0.80 mm; widths: 15 - 50 mm)

MaterialsDIN EN CEN ASTM JIS

CuSn4 CW450K C51100 C5111

CuSn5 CW451K C51000 C5102

CuSn6 CW452K C51900 C5191

CuSn8 CW453K C52100 C5210


Materials Thickness Width Inner diamter of the coil

Max. coil weight

CuSn0,15 0.15 - 3.0 mm 5 - 630 mm 300/400 mm approx. 10kg /mm

CuSn0.20.20 - 2.0 mm> 2.0 - 4.0 mm

16 - 700 mm100 - 700 mm

300/400/500/600 mm400/500/600 mm

approx. 3.5/5.5/11kg/mmapprox. 3.5/5.5/11kg/mm

CuSn40.20 - 2.0 mm> 2.0 - 4.0 mm

16 - 700 mm100 - 700 mm

300/400/500/600 mm400/500/600 mm

approx. 4/6/12kg/mmapprox. 4/6/12kg/mm

CuSn50.20 - 2.0 mm> 2.0 - 4.0 mm

16 - 700 mm100 - 700 mm

300/400/500/600 mm400/500/600 mm


CuSn50.20 - 2.0 mm> 2.0 - 4.0 mm

16 - 700 mm100 - 700 mm

300/400/500/600 mm400/500/600 mm


CuSn8 0.20 - 2.0 mm

> 2.0 - 4.0 mm16 - 700 mm

100 - 700 mm300/400/500/600 mm

400/500/600 mmapprox. 4/6/12kg/mmapprox. 4/6/12kg/mm

Dimensions Strips

Other dimensions, coil weights and inner coil diameters on request.

Material Thickness

mm

Width

mm

Max. 1)

coil weight 1/1 Coil

Standard coil weights1) Standard inner dia. of the coil

mm1/1 Coil 1/2 Coil 1/3 Coil

Cu-HCP (SE-Cu) 0.10 – 1.50 10 – 670 12 approx. 12 approx. 6 approx. 4 300, 400

Cu-DHP (SF-Cu) 0.10 – 1.50 10 – 670 12 approx. 12 approx. 6 approx. 4 300, 400

Cu-ETP (E-Cu) 0.10 – 1.50 10 – 670 12 approx. 12 approx. 6 approx. 4 300, 400

Cu-OF (OF-Cu) 0.10 – 1.50 10 – 670 12 approx. 12 approx. 6 approx. 4 300, 400

CuSn0,15 0.15 – 3.00 5 – 630 10 approx. 10 approx. 5 approx. 3.3 300, 400

CuSn0,2 0.2 – 2.00 16 – 700 11 approx. 11 approx. 5.5 approx. 3.5 300, 400

CuSn4, 5, 6, 8 0.15 – 3.00 5 – 630 10 approx. 10 approx. 5 approx. 3.3 300, 400

1) In kg per range; not for all combinations of thickness and width. Deviations in inner diameter of coil may be agreed upon.

KME is the leading manufacturer of copper and copper-alloy precision cable strips which are used throughout the world in the production of cables for telecommunications, high - frequency engineering and energy transfer.


Cable Strips

Cable StripsExtremely high-quality copper strips for any type of communications

(coaxial, HF submarine cable), heavy-duty and special cable.

Cable strips with specific demands on the welding parameters

stand out for the following features:

• No periodic fluctuations in thickness

• Technically fat-free, smooth surface

• High dimensional stability

• High electrical conductivity

• Concentrated materials composition

Copper strips with no specific demands on welding parameters

stand out for the following features:

• High electrical conductivity

• Low-fat, smooth surface

• Narrow size tolerances

Delivery FormsIn addition, KME supplies special strips such as one- or two-sided

copolymer coated strips and/or tailor-made perforated strips

which are used in radiating cables, etc.


14

KME produces soft copper strips with clean, smooth surfaces and deburred edges for transformer windings. Their characteristic feature is the carefully deburred edges, making them ideal for constructing electric windings with large conductor cross-sections. They are mainly used to equip distribution transformers and special transformers for welding engineering, making rectifiers and electrotechnical appliances.

Transformer Strips


Copper strips for manufacture of transformer windings

Cu-ETP (E-Cu58) CW004ACu ≥ 99.97%

Tolerancesaccording to EN 13599

Coil design/PackagingInner diameter 400 mm for widths up to 700 mm500/600 mm for widths above 700 mmwith or without paper interleaving (we recommend the use of paper interleaving)

Scope of supply0.20 – 2.00 mm thickness, ≤ 700mm width0.40 – 2.50 mm thickness, > 700 – 1.200mm width

Standard dimensions0.50 – 1.20mm thick x 500 – 700mm wide



Other materials on request.

Standard formats (e.g. 1,000 x 2,000 mm) in the materials– Cu-ETP (E-Cu)– Cu-DHP (SF-Cu)can be supplied immediately ex stock (subject to availability).

MaterialsDIN EN CEN

Cu-ETP (E-Cu58) CW004A

Cu-DHP (SF-Cu) CW024A

Cu-HCP (SE-Cu) CW021A

Cu-OF (OF-Cu) CW008A

CuNi

Dimensions SheetsThickness

mm Width

mmLength

mm

0.4 ≤ 3.0 500 –1,250 500 ≤ 600

> 3.0 ≤ 6.0 < 1,800 ≤ 3,048

> 6.0 ≤ 12.0 < 1,800 ≤ 6,000

> 12.0 ≤ 150.0 on request

Larger sheets and other special dimensions upon request


Sheets and Plates

KME produces copper and copper-alloy sheets and plates to inter-national standards for stamping, forming, drilling and deep drawing parts; for tubes, vessels, welding construction, sealing, plating, capacitors, bus bars, cable connectors, finned tubing, kitchen appliances, gifts – for any type of metal good.

KME produces copper discs and plates to EN 1652 and EN 1653 for hot-water appliances, household appliances and any type of metal good with a high-quality surface and the best possible deep-draw properties.

Discs


KME Germany GmbH & Co. KG — Copper and Copper Alloy Products

DiscsStamped and cut copper discs in low-earing quality for deep-drawing purposes.

The KME copper discs complying with EN 1652 and EN 1653 are suitable for the production of boilers, electrical household appliances and all kinds of metal-objects requiring a high-quality surface and a good deep-drawing quality. The discs can be made from strips or plates. Discs made from strip are usually annealed (R220). On request however, the physical state of semi-hard (R240) or hard (R290) is also available.

Profiled sheets and segmentsIndividual profiled blanks with stamped, cut or sawn edges for the construction of containers and apparatus.

Copper discs production from strips• soft (R 220) • half-hard (R 240): upon request • hard (R 290): upon request

Dimensions discs (production from strips)

Thicknessmm

Diametermm

0.40 – 2.60 100 – 600

2.61 – 3.50 100 – 450

3.51 – 5.00 upon request

0.60 – 2.00 601 – 1,000

1.01 – 2.00 1,001 – 1,200

Dimensions discs (hand-rolled sheets /heavy sheets)

Thicknessmm

Diameter mm

Temper

> 2.0 – 10.0 500 – 1,200 soft, half-hard, hard

>10.0 – 30.0 approx 1,900 soft, half-hard, hard

> 30.0 – 90.0 approx 1,900 soft, hard as rolled

Other dimensions on request.

17

18

DIN EN 10002-1 Metallic materials. Tensile testing

DIN EN ISO 9001 Quality management systems - requirements

DIN EN 10204 Metallic products - types of inspection documents

DIN EN 1172BS EN 1172

Strips and sheets for the building industry

DIN EN 1652BS EN 1652NF EN 1652

Plates, sheets, strips and discs for general purposes

DIN EN 1653 BS EN 1653NF EN 1653

Plates, sheets and discs for boilers, pressure vessels and hot water storage systems

DIN EN 1654BS EN 1654

Strips for springs and connectors

DIN EN 13599BS EN 13599NF EN 13599

Copper plates, sheets and strips for use in electrical engineering

ASTM-F68 Oxygen-free copper in wrought forms for electron devices

ASTM-B-152ASME-SB-152

Copper sheet, strip, plate and rolled bar

ASTM-B-171ASME-SB-171

Copper-Alloy plate and sheet for pressure vessels, condensers and heat exchangers

ASTM-B-370 Copper sheet and strip for building constructtion

IIS H 3100 Copper and copper alloys sheets, plates and strips

JIS H 3110 Phosphor bronze and nickel silver sheets, plates and strips

JIS H 3130Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver sheets, plates and strips for springs

Below is a list of the standards to which all our industrial rolled products refer.

international StandardSKME industrial rolled products are manufactured in compliance with the main international standards.

19 23

Copper Electric conductivity

Material DIN EN CEN ASTM JISTensile strength Rmin .. Rmax BS MS/m IACS (%)

Cu–ETP Cu–ETP CW004A C11000 C1100 R200 .. R360 – ≥58 ≥100

Cu-HCP Cu-HCP CW021A C10300 – R200 .. R360 – ≥57 ≥98.3

Cu-PHC(SE-Cu)

Cu-PHC(SE-Cu)

CW020A C10300 (OFXLP-Cu)

– R200 .. R360 – ≥58 ≥100

Cu-DLP Cu-DLP CW023A C12000 – R200 .. R360 – ≥52.2 ≥90

Cu-DHP Cu-DHP CW024A C12200 C1220 R200 .. R360 – ≥47 ≥81

Cu-OFE Cu-OFE CW009A C10100 C1010 R200 .. R360 – ≥58.6 ≥101

CuZn0.5 CuZn0.5 CW119C C18661 C1866 R220 .. R360 – ≥46 ≥79

CuAg0.1P CuAg0.1P CW016A C10700 C1070 R200 .. R360 – ≥57 ≥98.2

DLPS-Cu DLPS-Cu – – C1010 R200 .. R360 – ≥52 ≥90

Material Brass

CuZn5 CuZn5 CW500L C21000 C2100 R230 .. R340 CZ125 ≥33 ≥56.9

CuZn10 CuZn10 CW501L C22000 C2200 R240 .. R350 CZ101 ≥25 ≥43



CuZn28 CuZn28 – – – R270 .. R630 – ≥16 ≥27.6


CuZn33 CuZn33 CW506L C26800 C2680 R280 .. R500 – ≥15 ≥26



CuZn39Pb2 CuZn39Pb2 CW612W – C3771 R360 .. R560 CZ120 ≥14 ≥24

CuZn40 CuZn40 CW617N C28000 – R340 .. R470 CZ122 ≥15 ≥25.9

Material Bronze

CuSn4 CuSn4 CW450K C51100 C5111 R290 .. R700 PB 101 ≥11 ≥19



CuSn8 CuSn8 CW453K C52100 C5210 R370 .. R850 PB 104 ≥7.5 ≥13

alloyS

20

Copper Electric conductivity

Material DIN EN CEN ASTM JISTensile strength Rmin .. Rmax BS MS/m IACS (%)

Cu–ETP Cu–ETP CW004A C11000 C1100 R200 .. R360 – ≥58 ≥100

Cu-HCP Cu-HCP CW021A C10300 – R200 .. R360 – ≥57 ≥98.3

Cu-PHC(SE-Cu)

Cu-PHC(SE-Cu)

CW020A C10300 (OFXLP-Cu)

– R200 .. R360 – ≥58 ≥100

Cu-DLP Cu-DLP CW023A C12000 – R200 .. R360 – ≥52.2 ≥90

Cu-DHP Cu-DHP CW024A C12200 C1220 R200 .. R360 – ≥47 ≥81

Cu-OFE Cu-OFE CW009A C10100 C1010 R200 .. R360 – ≥58.6 ≥101

CuZn0.5 CuZn0.5 CW119C C18661 C1866 R220 .. R360 – ≥46 ≥79

CuAg0.1P CuAg0.1P CW016A C10700 C1070 R200 .. R360 – ≥57 ≥98.2

DLPS-Cu DLPS-Cu – – C1010 R200 .. R360 – ≥52 ≥90

Material Brass





CuZn28 CuZn28 – – – R270 .. R630 – ≥16 ≥27.6


CuZn33 CuZn33 CW506L C26800 C2680 R280 .. R500 – ≥15 ≥26



CuZn39Pb2 CuZn39Pb2 CW612W – C3771 R360 .. R560 CZ120 ≥14 ≥24

CuZn40 CuZn40 CW617N C28000 – R340 .. R470 CZ122 ≥15 ≥25.9

Material Bronze




CuSn8 CuSn8 CW453K C52100 C5210 R370 .. R850 PB 104 ≥7.5 ≥13

Nickel Electric conductivityMaterial DIN EN CEN ASTM UNS JIS

Tensile strength Rmin .. Rmax MS/m IACS (%)

CuNi10Fe1.6Mn – CW352H C70600 – C7060 R300 .. R620 – –

CuNi25 – CW350H C71300 – – - – –

CuNi30Mn1Fe – CW354H C71500 – C7150 R300 .. R620 – –

Cu75Zn20Ni5 – – – – – -

CuNi18Zn20 – CW409J C76400 – – R500 .. R640 – –

Material Copper and Aluminium

CuAl10Ni5Fe4 – CW307 G C63000 – C6301 – – –

CuAl5Zn5Sn1 – – – – – – – –

CuAl6Ni2 – – – – – – – –

Material High Performance Alloys (HPA)

STOL®76 CuNi1Si – – C19010 – R360 .. R580 ≥35 ≥60

STOL®76M CuNiSi CW109C – C19002 – R360 .. R620 ≥33 ≥57

STOL®77 CuSnAgMg – – C15500 – R320 .. R480 ≥46 ≥79

STOL®78 CuMg – – C18665 – R380 .. R620 ≥36 ≥62

STOL®79 CuFe2P – – C19400 – R360 .. R550 ≥35 ≥60

STOL®80 CuSn CW177C – C14410 – R250 .. R460 ≥44 ≥76

STOL®92 CuNiSi – – C64725 – R360 .. R650 ≥23 ≥40

STOL®94 CuNiSi – – C70310 – R360 .. R800 ≥25 ≥43

STOL®95 CuCr1Zr CW106C – C18400 – R480 .. R540 ≥48 ≥83

STOL®194 CuFe2P CW107C – C19400 – R300 .. R530 ≥35 ≥60

CuFe0.1P CuFe0.1P – – C19210 – R300 .. R420 ≥46 ≥80

CuSn2Fe0.1P CuSn2Fe0.1P – – – – R400 .. R600

CuSn3Zn9 – CuSn2Zn10

CuSn3Zn9

CuSn2Zn10CW454K – C42500 – R320 .. R660 ≥16 ≥30

CuNi3Si CuNi3Si – – C70250 – R620 .. R690 ≥25 ≥43

CuSn2Zn2Fe CuSn2Zn2Fe – – C50725 – R400 .. R600 ≥19 ≥25

TECSTRIP®_white – – – – – R480 .. R800 ≥1 ≥2

alloyS

Mine

Cathode

Melting

Billets

Special Products

Smelting

Recycling

Casting

Slabs

Brass ProductsStandard Products

Value addingValue adding at KME covers all the stages of processing the basic material copper into semi-finished and finished products. KME supply their products with the great advantage that they are all from a “one-stop shop”.

© DKI © DKI

© DKI

Indu

stri

al R

olle

d

® = registered trademark

Use of products herein implies a careful assessment of its intended purpose, as well as environmental and operating conditions where product is to be put in. Such assessment is to be carried out by skilled technicians at a planning stage. KME assumes no obligation or liability in connection to any use of its products not in accordance to above recommendations.

KME informs that product pictures herein are intended as examples only. KME shall not be held responsible for any possible inexactness and / or inaccuracy herein and further reserves the right to alter, modify, or amend herein contents any time.

0116.000.0108

KME Germany GmbH & Co. KGPO Box 33 2049023 OSNABRÜCKKlosterstraße 2949074 OSNABRÜCKGERMANYFon +49 (0) 541 321-4144Fax +49 (0) 541 [email protected]

Documents

Industrial Rolled Copper and Copper Alloy Products DIVISON/4 Ind… · Industrial Rolled Copper and Copper Alloy Products. 4 2 ... (EN, DIN, ASTM, BS, ... manufactured to EN 1652