Industrial Hose ProductsPRB 4800-Welding

Welding

Your Job. Our Hose.

For the name of the Parker distributor nearest you, call 1-800-C-PARKER.

QUICK REFERENCE

3

Chemical TransferDescription: For suction and discharge ofchemicals in production or transportapplications.

• 7274/7276 - Poly-Chem• 7373 - Blue Thunder

Petroleum DispensingDescription: For dispensing of petroleumproducts.

• 7124 - Super-Flex 2000• 7114 - Soft-Flex 2000• 7280 - Flexever 2000• 7574 - Balanced VR• 7246 - 3/4” Active VR• 7253 - 7/8” Active VR

Air, Water & Multi-PurposeDescription: For transfer and clean up infood processing facilities.

• 7092 - GST II, EPDM tube & Cover• 7094 - MPT II, Oil Resistant• 7257 - Day-Flo Water Suction• 7306 - Day-Flo Water Discharge• 7107 - Grizzly• 7268 - Stinger Mine Spray

Petroleum TransferDescription: For suction and discharge ofpetroleum in production or transportapplications.

• 7222/7223 - Gold Label• 7216/7217 - Translite• 7224/7225 - Fuel Discharge• 7290 - Hot Tar & Asphalt

WeldingDescription: For welding and cuttingoperations with oxygen and most fuel gases.

• 7109 - Twin Grade T• 7110 - Twin Grade RM• 7126 - Twin Grade M• 7141/7142 - Single Grade T• 7120/7121 - Single Grade M• 7293 - Oxygen Charging

Jiffy®

Description: An oil-resistant hose for usewith air tools, water, mild chemicals andvarious petroleum products. Special braidangle for quick and secure coupling retention.

• 7212 - Jiffy (Offered in Black, Blue, Gray, Green and Red)

• 7161 - Jiffy Flex™ 250 (non-conductive)

Food HandlingDescription: For transfer and clean up infood processing facilities.

• 7304 - NBR Discharge (250 psi)• 7305 - Butyl S&D (150 psi)• 7310 - NBR S&D (150 psi)• 7079 - ECW Washdown• 7080 - HDW Creamery Washdown• 7360 - Wildcatter Washdown

LPG (Propane)Description: For transfer of LPG liquid or vapor.

• 7132 - Bobtail Delivery• 7232 - Transport• 7231 - Transport• 7170 - Flexible Connectors

SteamDescription: For high pressure transfer ofsteam (up to 250 psi).

• 7263/7264 - EPDM• 7286/7287 - Butyl• 7288/7289 - EPDM tube,

oil resistant cover• 7250/7204 - Oil resistant

Material HandlingDescription: For transfer of abrasivematerials.

• 7218 - Drilline Cement• 7238 - Plaster & Concrete• 7363 - Super-Flex• 7393 - Rock Dust• 7244 - Sand Blast - 4 Ply• 7245 - Sand Blast - 2 Ply

Anhydrous AmmoniaDescription: For high pressure transfer ofAnhydrous Ammonia up to 350 psi.

• 7262 - Nylon Reinforced• 7261 - Stainless Reinforced

ID ID Reinf. OD OD Approx. Wt. Min. Bend Max. Rec.Part No. (in.) (mm) Spirals (in.) (mm) Per 100 Ft. Radius WP

7109-191 3/16 4.8 2 0.438 11.1 15 2.0 2007109-251 1/4 6.4 2 0.531 13.5 21 2.5 2007109-311 5/16 7.9 2 0.594 15.1 28 3.0 2007109-381 3/8 9.5 2 0.656 16.7 32 4.0 200

Series 7110RED - ACETYLENE LINE ONLYTUBE NOT OIL AND FLAME RESISTANTCOVER OIL AND FLAME RESISTANTSiameez® Twin Welding Hose Grade RMThis hose is designed for portable or production line welding infactories, shipyards, construction work, etc. Meets or exceedsRMA and CGA (Compressed Gas Association) specifications fortype VD (vulcanized double), Grade RM welding hose. Thecover is oil and flame resistant with a tube that is non-blooming.

4:1 Design factor

Tube: Black SBRCover: Green (oxygen), Red (acetylene)

NeopreneReinforcement: Multiple textile spiralsTemp. Range: -40˚ F to +200˚ FBranding: PARKER/DAYCO 7110 WELDING !

WARNING ACETYLENE ONLY 3/16 ID MAX WP 200 PSI RMA/CGA IP-7-99 STD DUTY GRADE RM COUPLE WITH ONE INCH FERRULES MADE IN USA

Brand Description: Ink Brand - White letter color

Warning! Care should be taken to avoid gouging,dragging, abrading or otherwise damaging the hosecover, which may also lead to premature hose failure.Do not attempt to repair or re-couple hose assemblies;replace all assemblies that show signs of age or abuse.Refer to RMA IP-11-5, "Welding Hose, Precautions forthe Selection and Use of".

Warning! Grade R & RM for use with acetylene gasONLY! DO NOT use with any other fuel gas. Bleed hoseswhen not in use for 30 minutes or longer. Couple withone inch ferrules only.

Couplings: Special right hand or left hand threaded brass inserts and crimp ferrules–not available from Parker/Dayco. Couplings not sold or quoted separately.

Series 7109OIL AND FLAME RESISTANT TUBE AND COVERSiameez® Twin Welding Hose Grade TThis hose is designed for portable or production line welding infactories, shipyards, construction work, etc. This hose is usedwith oxygen and most current fuel gases, including acetylene,hydrogen, propylene, propane, natural gas and MAPP® gas. Thetube is non-blooming. Meets or exceeds RMA/CGA IP-7-99standards for grade T, Type VD (vulcanized double) welding hose.

4:1 Design factor

Tube: Black NeopreneCover: Green (oxygen), Red (fuel gas)

NeopreneReinforcement: Multiple Textile SpiralsTemp. Range: -40˚ F to +200˚ FBranding: PARKER/DAYCO 7109 WELDING !

WARNING FUEL GAS 3/16 ID MAX WP 200 PSI RMA/CGA IP-7-99 STD DUTY GRADE T COUPLE WITH ONE INCH FERRULES MADE IN USA (DATE CODE)

Brand Description: Ink Brand - White letter color

Warning! Care should be taken to avoid gouging,dragging, abrading or otherwise damaging the hosecover, which may also lead to premature hose failure.Do not attempt to repair or re-couple hose assemblies;replace all assemblies that show signs of age or abuse.Refer to RMA IP-11-5, "Welding Hose, Precautions for theSelection and Use of".

Warning! Bleed hoses when not in use for 30 minutes orlonger. Couple with one inch ferrules only.

Couplings: Special right hand or left hand threaded brass inserts and crimp ferrules–not available from Parker/Dayco. Couplings not sold or quoted separately.

IMPORTANT

Series7109

Series7110

Refer to the Safety and Technical Data Information Section in Catalog 4800 for the proper use of this hose.

ID ID Reinf. OD OD Approx. Wt. Min. Bend Max. Rec.Part No. (in.) (mm) Spirals (in.) (mm) Per 100 Ft. Radius WP

7110-191 3/16 4.8 2 0.438 11.1 15 2.0 2007110-251 1/4 6.4 2 0.531 13.5 20 2.5 2007110-311 5/16 7.9 2 0.594 15.1 25 3.0 2007110-381 3/8 9.5 2 0.656 16.7 31 4.0 200

4

Series 7126RED - ACETYLENE LINE ONLYTUBE AND COVER NOT OIL AND FLAME RESISTANTSiameez® Twin Welding Hose - Grade RThis hose is recommended for portable or production linewelding in factories, shipyards, construction work, etc. Meets orexceeds RMA and CGA (Compressed Gas Association)specifications for Type VD, Grade R welding hose. The tube is non-blooming.

4:1 Design factor

Tube: Black EPDMCover: Vulcanized twin - Green (oxygen),

Red (acetylene) EPDMReinforcement: Multiple textile spiralsTemp. Range: -20˚ F to +200˚ FBranding: PARKER/DAYCO 7126 WELDING !

WARNING ACETYLENE ONLY 3/16 ID MAX WP 200 PSI RMA/CGA IP-7-99 STD DUTY GRADE R COUPLE WITH ONE INCH FERRULESMADE IN USA

Brand Description: Ink Brand - White letter color

Warning! Care should be taken to avoid gouging,dragging, abrading or otherwise damaging the hosecover, which may also lead to premature hose failure.Do not attempt to repair or re-couple hose assemblies;replace all assemblies that show signs of age or abuse.Refer to RMA IP-11-5, "Welding Hose, Precautions forthe Selection and Use of".

Warning! Grade R & RM for use with acetylene gasONLY! DO NOT use with any other fuel gas. Bleed hoseswhen not in use for 30 minutes or longer. Couple withone inch ferrules only.

Couplings: Special right hand or left hand threaded brass inserts and crimp ferrules–not available from Parker/Dayco. Couplings not sold or quoted separately.

IMPORTANT

Series7126

Series7141

Refer to the Safety and Technical Data Information Section in Catalog 4800 for the proper use of this hose.

Series 7141 - RED - FUEL GAS LINE

Series 7142 - GREEN - OXYGEN LINEOIL AND FLAME RESISTANT TUBE AND COVERSingle Line Welding Hose - Grade TFor all welding and cutting operations with oxygen and mostcurrent fuel gases, including acetylene, hydrogen, natural gas,propane, propylene and MAPP® gas, where separate lines arepreferable. The tube is non-blooming. Meets or exceedsRMA/CGA IP-7-99 standards for Grade T, Type S welding hose.

4:1 Design factor

Tube: Black NeopreneCover: Ribbed Red or Green NeopreneReinforcement: Multiple textile spiralsTemp. Range: -40˚ F to +200˚ FBranding: PARKER/DAYCO 7141 WELDING !

WARNING FUEL GAS 3/16 ID MAX WP 200 PSI RMA/CGA IP-7-99 STD DUTY GRADE T COUPLE WITH ONE INCH FERRULES MADE IN USA (DATE CODE)

Brand Description: Ink Brand - White letter color

Warning! Care should be taken to avoid gouging,dragging, abrading or otherwise damaging the hosecover, which may also lead to premature hose failure.Do not attempt to repair or re-couple hose assemblies;replace all assemblies that show signs of age or abuse.Refer to RMA IP-11-5, "Welding Hose, Precautions forthe Selection and Use of".

Warning! Bleed hoses when not in use for 30 minutes orlonger. Couple with one inch ferrules only.

Couplings: Special right hand or left hand threaded brass inserts and crimp ferrules–not available from Parker/Dayco. Couplings not sold or quoted separately.

ID ID Reinf. OD OD Approx. Wt. Min. Bend Max. Rec.Part No. (in.) (mm) Spirals (in.) (mm) Per 100 Ft. Radius WP

7126-191 3/16 4.8 2 0.656 16.7 14 2.0 2007126-251 1/4 6.4 2 0.531 13.5 10 2.5 2007126-311 5/16 7.9 2 0.594 15.1 13 3.0 2007126-381 3/8 9.5 2 0.656 16.7 28 4.0 200

ID ID Reinf. OD OD Approx. Wt. Min. Bend Max. Rec.Part No. (in.) (mm) Spirals (in.) (mm) Per 100 Ft. Radius WP

19200 3/16 4.8 2 0.438 11.1 8 2.0 20025200 1/4 6.4 2 0.531 13.5 10 2.5 20031200 5/16 7.9 2 0.594 15.1 14 3.0 20038200 3/8 9.5 2 0.656 16.7 16 4.0 20050200 1/2 12.7 4 0.875 22.2 28 5.0 200

5

Series 7120 - RED-ACETYLENE LINE ONLYSeries 7121 - GREEN OXYGEN LINETUBE AND COVER NOT OIL AND FLAME RESISTANTSingle Line Welding Hose - Grade RThis hose is for welding and cutting operations with oxygen andacetylene gas (only) where separate lines are preferable. Meets orexceeds RMA and CGA (Compressed Gas Association) standards forGrade R, Type S welding hose. The tube is non-blooming and wax free.

4:1 Design factor

Tube: Black EPDMCover: Ribbed Red or Green EPDMReinforcement: Multiple Textile SpiralsTemp. Range: -40˚ F to +200˚ FBranding: PARKER/DAYCO 7120 WELDING ! WARNING

ACETYLENE ONLY 3/16 ID (4.8 MM) MAX WP200 PSI RMA/CGA IP-7-99 STD DUTY GRADER COUPLE WITH ONE INCH FERRULES MADE IN USA (DATE CODE)

Brand Description: Ink Brand - White letter color

Warning! Care should be taken to avoid gouging,dragging, abrading or otherwise damaging the hosecover, which may also lead to premature hose failure.Do not attempt to repair or re-couple hose assemblies;replace all assemblies that show signs of age or abuse.Refer to RMA IP-11-5, "Welding Hose, Precautions forthe Selection and Use of".

Warning! Grade R & RM for use with acetylene gasONLY! DO NOT use with any other fuel gas. Bleed hoseswhen not in use for 30 minutes or longer. Couple withone inch ferrules only.

Couplings: Special right hand or left hand threaded brass inserts and crimp ferrules–not available from Parker/Dayco. Couplings not sold or quoted separately.

Series 7293Oxygen Charging HoseDesigned for lancing and scarfing applications in steel mills andfoundries. This hose is made with high quality, flame resistantNeoprene rubber compounds that stand up to tough, oilyenvironments. The green Neoprene cover is used to indicatecolor coding for oxygen. The tube is cleaned and the ends arecapped at the factory.

4:1 Design factor

Tube: Black NeopreneCover: Green NeopreneReinforcement: Multiple textile pliesTemp. Range: -22˚ F to +176˚ FBranding: PARKER/DAYCO SERIES 7293 OXYGEN

CHARGING 500 PSI MAX WP MADE IN USA 001

Brand Description: Emboss Brand

Refer to the Safety and Technical Data Information Section in Catalog 4800 for the proper use of this hose. IMPORTANT

Series7120

ID ID Reinf. OD OD Approx. Wt. Min. Bend Max. Rec.Part No. (in.) (mm) Spirals (in.) (mm) Per 100 Ft. Radius WP

19200 3/16 4.8 2 0.438 11.1 7 2.0 20025200 1/4 6.4 2 0.531 13.5 10 2.5 20031200 5/16 7.9 2 0.594 15.1 13 3.0 20038200 3/8 9.5 2 0.656 16.7 14 4.0 20050200 1/2 12.7 4 0.875 22.2 25 5.0 200

Series7293

ID ID Reinf. OD OD Approx. Wt. Min. Bend Max. Rec.Part No. (in.) (mm) Spirals (in.) (mm) Per 100 Ft. Radius WP

7293-0500 1/2 12.7 2 0.992 25.2 38 3.5 5007293-0750 3/4 19.1 2 1.276 32.4 54 3.5 5007293-1000 1 25.4 2 1.528 38.8 68 4.5 5007293-1250 1 1/4 31.8 2 1.930 49.0 108 5.0 5007293-1500 1 1/2 38.1 2 2.174 55.2 124 7.0 5007293-2000 2 50.8 4 2.764 70.2 180 14.0 500

6

IMPORTANT

Series7172

Series 7172Non-Conductive Cable Cover - SpiralThis hose has been designed for use as cable covering on watercooled welding systems. The specially blended non-conductiveNitrile tube and EPDM cover provide a minimum of 1 megohmresistance per inch at 1000 volts DC. The synthetic textile spiralreinforcement provides a lightweight product that can be usedin many applications that require a non-conductive constructionand 200 PSI working pressures.

4:1 Design factor

Tube: Black NBR BlendCover: Black EPDMReinforcement: Textile spiralsTemp. Range: -20˚ F to +212˚ FBranding: None

Refer to the Safety and Technical Data Information Section in Catalog 4800 for the proper use of this hose.

ID ID Reinf. OD OD Approx. Wt. Min. Bend Max. Rec.Part No. (in.) (mm) Spirals (in.) (mm) Per 100 Ft. Radius WP

7172-19200 3/16 4.8 2 0.405 10.3 6 1.5 2007172-25200 1/4 6.4 2 0.477 12.1 7 2.0 2007172-31200 5/16 7.9 2 0.500 12.7 8 2.5 2007172-38200 3/8 9.5 2 0.601 15.3 10 3.0 200

7

When ordering Parker Industrial hose or accessories,please state the part number as shown in the ParkerIndustrial Hose Products Catalog 4800. Specify in feet,total length of hose required when ordering bulk hose.Specify number of pieces if cut lengths of hose arerequired and specify those lengths in feet and/or inches.Be sure to double check thread or hose sizes of itemsrequired.

To select proper hose and fitting materials for specificapplications, refer to Chemical Resistance Information inCatalog 4800 or contact the Technical ServiceDepartment, Industrial Hose Division, Cleveland, Ohio.

If in doubt about which type or size of hose andfitting to specify, or the compatibility of the fluid youintend to use, consult your local Parker Industrial HoseProducts Distributor, Parker Field Sales or Industrial HoseDivision.

Note: Refer to Catalog 4800 or call the IndustrialHose Division for more detailed application information.

How To OrderThe items described in this document are herebyoffered for sale by Parker Hannifin Corporation, itssubsidiaries or its authorized distributors. This offer andits acceptance are governed by the provisions stated inthe “Offer of Sale”.

WARNINGFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTSAND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSEDEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, itssubsidiaries and authorized distributors provide product and/or system optionsfor further investigation by users having technical expertise. It is important thatyou analyze all aspects of your application and review the informationconcerning the product or system in the current product catalog. Due to thevariety of operating conditions and applications for these products or systems,the user, through its analysis and testing, is solely responsible for making thefinal selection of the products and systems and assuring that all performance,safety and warning requirements of the application are met.

The products described herein, including without limitation, product features,specifications, designs, availability and pricing, are subject to change by ParkerHannifin Corporation and its subsidiaries at any time without notice.

Call the Parker Information Center toll-free for catalogs, literature, or additional information:

1-800-C PARKER (1-800-272-7537)

Offer Of Sale

Parker Industrial Hose Division17295 Foltz Industrial ParkwayCleveland, OH 44136Tel: 1-800-C-PARKER

(1-800-272-7537)Web site: www.parker.com/indhose

© 2002 Parker Hannifin CorporationPRB 4800-Welding 5M-6/02