Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Indust r ia l & Commerc ia l L ight ing Cata logue
CONTENTS
High Bay lights p. 6-29
Floodlights p. 30-43
Tri Proofs p. 44-45
Wall Pack p. 46-47
Linear Lights p. 48-49
Shop Lights p. 50-51
Linear Trunk Lights p. 52-53
Track Lights p. 54-57
Downlights p. 58-73
Ceiling Lights p. 74-75
Panel Lights p. 76-83
Tubes p. 84-95
Compact Linear Lights p. 96-99
T-Bulbs p. 100-101
SYMBOLS KEY
TÜV certification marks show that manufacturer’s products have met applicable safety requirements and quality standards.
DEKRA certification marks demonstrate that the products have been tested thoroughly and meet the required safety or performance standards.
The NSF certification mark on a product means that the product complies with all standard requirements and that it has been tested by one of the most respected independent product testing organizations.
Certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA)
Any product bearing the GS Mark indicates that it was tested and complies with the minimum require-ments of the German Product Safety Act. The GS Mark, which stands for “Geprüfte Sicherheit” in German and means Safety Tested, is a licensed mark of the German government and may only be issued by an accredited product safety testing and certification agency.
CB Scheme is an international system for mutual acceptance of test reports and certificates dealing with the safety of electrical and electronic components, equipment and products.
ENEC (European Norms Electrical Certification) is a certification scheme under CENELEC, accepted throughout Europe. The ENEC Mark for electrical products demonstrates compliance with European safety standards.
The VDE Mark indicates conformity with the VDE standards or European or internationally harmonized stan-dards resp. and confirms compliance with protective requirements of the applicable EC Directives.
Energy Star = a programme which provides certification to buildings and consumer products which meet certain standards of energy efficiency.
The ETL Mark is proof of product compliance to published safety standards in North America.
The UL Mark is the single most accepted Certification Mark in the United States. If a product carries one of these marks, it means UL found that representative product samples met UL’s requirements
The DesignLights Consortium® is a collaboration of utility companies and regional energy efficiency organi-zations. The certification is issued for commercial LED lights based on their color rendering capabilities, light distribution and output, lumen maintenance, longevity or the ability to withstand stress, and the duration of the warranty period
The FCC Declaration of Conformity or the FCC mark is a certification mark employed on electronic prod-ucts manufactured or sold in the United States which certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications Commission.
Electrical Product Safety Approval Certification that allows the sale of electrical equipment, accessories and appliances in Australia and New Zealand.
The C-Tick mark is intended for use on products that comply with EMC standards. The label indicates that the product complies with the applicable EMC standard and establishes a traceable link between a prod-uct and the supplier responsible for placing it on the Australian or New Zealand market.
The PSE law governs electrical appliance safety in Japan. The PSE symbol can be found on appliances that are approved for use in Japan.
CCTdimming0-10V 1-10V DALI Triac
Non-Dimmable Product
0-10V Dimmable Product
1-10V Dimmable Product
DALI Dimmable Product
CCT Dimmable Product
TRIAC Dimmable Product
INGRESS PROTECTION RATING
Rating Example
IP 6 5
Ingress protection Against Solids Against Liquids
The first number identifies the ingress protection rating against solids
1. for solid bodies with dimensions > 50mm2. for solid bodies with dimensions > 12.5mm3. for solid bodies with dimensions > 2.5mm4. for solid bodies with dimensions > 1mm5. Dust protected6. Dust tight
The second number identifies the ingress protection rating against liquids
1. for vertically falling drops2. for vertically falling drops when enclosure is tilted up to 15˚ vertically3. for water sprayed at an angle up to 60˚ vertically4. for water splashed in any direction5. for water projected in jets against the enclosure from any direction6. for water projected in powerful jets against the enclosure from any direction7. for enclosure’s temporary immersion at 1 meter in the water, under defined conditions8. for enclosure’s continuous immersion in the water, under more severe conditions to those of number 7.
IMPACT PROTECTION RATING
Rating Example
IK 05
Impact protection Mechanical Impact level
The number identifies the impact protection rating
00. No protection01-05. for tiny impact of < 1 Joule06. for impact of 1 Joule07. for impact of 2 Joule08. for impact of 5 Joule09. for impact of 10 Joule10. for impact of 20 Joule
Features & CertificatesSpecifications
Driver Brand
LED Chip
Smart Control Options
Material
Color
Installation Options
IES Files
Operating Temperature
Meanwell Driver
Philip LEDs
-40°C ~ +50°C
1-10V, DALI Dimming,PWM, Zigbee, Motion Sensor
Die-cast Aluminum & Optical grade PC
Black with black or orange ring
Suspended/Wall mounted
Available
Available accessories:
- Variety of adjustable & customizable bracket - Back light cover for 10% upwards light transmitance - Photocell - 10/20 KV SPD
140Lm/W 160Lm/W
5yrs Warranty
IP40IP65
Extra Features:
- Customizable housing color (under conditions) - Corrosion & aging resistant powder coating
DALI
IK08
THD <15%
10yrs Warranty
LM80
Hig
h B
ay
Lig
hts
0 0 6 A t l a s E x e c u t i v e S e r i e s
Product Parameter
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
60º 90º 120º
A
A
mm
Ø248
Ø319
841204
841229
841210
841235
Ø400
841207
841232
841223
841238
841226
841241
B
BC
mm
182
182
202
C
mm
138
138
141
60W/100W
150W
200W/240W
Wattage
60W
60WAC100-277V
3000K/4000K/5000K/5700K/6500K
>70>80
>0.95
140Lm/W
160Lm/W
100W
100W
150W
150W
200W
200W
240W
240W
60°/90°/120°
Features & CertificatesSpecifications
Driver Brand
LED Chip
Smart Control Options
Material
Color
Installation Options
IES Files
Operating Temperature
Meanwell Driver
Nichia LEDs
-30°C ~ +50°C
1-10V, DALI Dimming, Zigbee, Daylight Sensor
Aluminum Alloy & Tempered Glass
Black with black or red ring
Suspended/Wall mounted
Available
5yrs Warranty
140Lm/W 160Lm/W
IP65
Available accessories:
- PC or Aluminum reflectors - Surface mounting brackets (fixed, ±30º/±40º/±180º adjustable) - Pole mounting brackets - Safety chain
DALI
Extra Features:
- Temperature tested luminaire - Emergency function available - Occupancy control available
IK08
THD <15%
LM80
Hig
h B
ay
Lig
hts
0 0 8 A t l a s P r o S e r i e s
Product Parameter
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
841440
841450
841444
841454
841442
841452
841446
841456
841448
50W
150W
AC100-277V 3000K/4000K/5000K
>70>80
>0.9 140Lm/W160Lm/W
140Lm/W
140Lm/W
70W
200W
90W
240W
100W
300W
120W 50°/60°/90°/120°
90°/120°
60°/90°/120°
B
C
A
Ø264Ø383Ø383Ø383Ø383
172.5182.0193.5203.5257.0
6181818181
50W/70W/90W100W/120W/150W200W240W300W
A
mm
B
mm
C
mmWattage
50º 90º60º 120º
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Meanwell Driver
Nichia LEDs
DALI, 1-10V Dimming,Occupancy sensor
Aluminum alloy & PC
Silver/White
Suspended/Wall mounted
Available
5yrs Warranty
140Lm/W 160Lm/W
IP66
-30°C ~ +50°C
Available accessories
- 50º/120º lens - PC cover - Surface mounting bracket - PC or Aluminum reflector - Safety Chain
DALI
Extra Features:
- Specially designed for food processing facilities - Smooth exterior diminishes dust & water
accumulation - No exposed screws, no glass
- Auto-off function for safety during maintenance
IP69K
LM79
Hig
h B
ay
Lig
hts
0 1 0 A t l a s H y g i e n e S e r i e s
Product Parameter
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
A
mm
Ø489
841466
841474
841470
841478
841480
841468
841476
841472
B
mm
200
C
mm
141 100W/120W/150W/200W
Wattage
100W
100WAC100-240V 3000K/4000K/
5000K>70>80
50°/90°/120°
>0.9
140Lm/W
160Lm/W60°/90°/120°
120W
120W
150W
150W
200W
200W
BC
A
R290mm
50º 90º60º 120º
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen/Meanwell Driver
LG LEDs
1-10V/DALI Dimming,Microwave/Daylight Sensor
Aluminum
Black
Suspended/Wall mounted
Available
5yrs Warranty
130Lm/W 150Lm/W140Lm/W 160Lm/W
IP65
-40°C ~ +50°C
Available accessories:
- Aluminum or PC reflector - 60º/90º Lens - Adjustable surface mounting bracket - Merytek 031V sensor with IP65 junction box
DALI
LM80
reflectors bracket
Hig
h B
ay
Lig
hts
0 1 2 H y d r a P r o S e r i e s
Product Parameter
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
120º
A
A
mm
Ø280Ø280Ø280Ø400
B
B
mm
168188193249
100W/150W200W240W500W
Wattage
842412
842424
842418
842415
842421
842427
100W
320W
AC180-305V4000K/5000K/5700K 80 60°*/70°*/
90°*/120°>0.9
130Lm/W-150Lm/W
150Lm/W
140Lm/W-160Lm/W
150W
200W
240W
500WAC90-305V
* 60°, 70° and 90° are achievable with the use of extra lens or reflector.
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
90º
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen Driver
/
1-10V/DALI Dimming,Motion/Daylight/PIR Sensor
Silver
Suspended
Available
5yrs Warranty
IP20
145Lm/W
-30°C ~ +45°C
Aluminum alloy & PC
DALI
Available accessories:
- Junction box
LM80
Hig
h B
ay
Lig
hts
0 1 4 A t l a s L i n e a r S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
120º
841490
841494
841492
80W
AC100-240V3000K/4000K/5000K >80 120°>0.9 145Lm/W120W
180W
139m
m94
mm
1000mm 33mm
72mm
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen Driver
/
Aluminum alloy & PC
Silver
Suspended
Available
5yrs Warranty
IP20
145Lm/W
-30°C ~ +45°C
1-10V/DALI Dimming,Motion/Daylight/PIR Sensor
DALI
LM80
Available accessories:
- Junction box
Hig
h B
ay
Lig
hts
0 1 6 A t l a s L i n e a r S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
841496
841500
841498
80W
AC100-240V 3000K/4000K/5000K
>70>80 120°>0.9 145Lm/W120W
180W
675mm 72mm
305m
m
94m
m
120º
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Inventronics Driver
Nichia LEDs
DALI Dimming
Aluminum alloy & PC
Silver
Suspended
Available
5yrs Warranty
IP54
135Lm/W
-25°C ~ +45°C
DALI
Extra Features:
- Snap-in lens without screws for a more convenient installation - Modular design (30W each module)
LM80
Hig
h B
ay
Lig
hts
0 1 8 A t l a s L i n e a r P r o S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
40ºx130º 50ºx90º
841482
841486
841488
841484
60W
AC100-240V 3000K/4000K/5000K
>70>80
40x130°/50x90°
>0.9 135Lm/W90W
120W
150W
Α
Β
C D
Amm
523
777
1031
1285
Bmm
85
85
85
85
C Dmm mm
61 84
61 84
61
61
84
84
60W
90W
120W
150W
Wattage
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Meanwell/Inventronics Driver
Nichia LEDs
1-10V, DALI Dimming, Zigbee, Motion Sensor
Aluminum alloy & Tempered glass
Silver
Suspended
Available
5yrs Warranty
IP20
110Lm/W
-30°C ~ +50°C
DALI
Extra Features:
- Special lens structure for anti-glare effect - Meanwell driver for non-dimmable version - Inventronics driver for DALI dimmable version
THD <15%
LM80
Hig
h B
ay
Lig
hts
0 2 0 A t l a s P a n e l S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
80ºx100º 30ºx100º 60ºx120º
841503
841511
841523
841515
841527
841519
841531
841507
60W
AC100-277V 3000K/4000K/5000K
>70>80
80°x100°, 30°x100°,60°x120°
>0.9 110Lm/W
90W
120W
240W
150W
300W
180W
400W
A
mm
336
621
906
B
mm
307
307
307
C
mm
61
61
61
60W/90W
120W/150W/180W/240W
300W/400W
Wattage
A
B
C
Extra Features:
- Special lens structure for anti-glare effect - Meanwell driver for non-dimmable version - Inventronics driver for DALI dimmable version
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Everlight/Hongli
1-10V Dimming, MotionSensor, Emergency function
Aluminum & PC
Black
Suspended
Available
5yrs Warranty
IP54
140Lm/W
-20°C ~ +40°C
Extra Features:
- Frosted cover version available (120° beam angle - 130 Lm/W efficiency) - Modular design: 4 modules for 100W and
150W models, 6 modules for 200W model - Non flickering driver
THD <12%
LM80
Hig
h B
ay
Lig
hts
0 2 2 A t l a s E c o S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
100º
841334
841340
841337
100W
AC100-277V 3000K/4000K/5000K/6500Κ 80 100°>0.9 140Lm/W150W
200W
Ø26
4mm
453mm
67.0
9mm
309mm
A
mm
453
453
B
mm
309
464
C
mm
67
67
100W/150W
200W
Specifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Features & Certificates
Lifud Driver
Epistar LEDs
1-10V/DALI Dimming, Occupancy Sensor
Die-cast aluminum & PC
Black
Suspended/Wall mounted
Available
5yrs Warranty
130Lm/W
IP65
-30°C ~ +50°C
Available accessories:
- Optical lens for 60° or 90° beam angle - Surface mounting bracket
DALI
Extra Features:
- CRI >80 version available with 120lm/W efficiency
IK10
LM80
bracket
Hig
h B
ay
Lig
hts
0 2 4 H y d r a S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
100º
841919
841925
841922
100W
AC100-277V 3000K/4000K/5000K/5700K >70 100°>0.95 130Lm/W150W
200W
A
A
B
mm
Ø270
Ø296
Ø339
Bmm
170
177
194
100W
150W
200W
Wattage
0
180
30
60
90
120
150-150
-120
-90
-60
-30
0
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen Driver
Osram LEDs
1-10V Dimming
Aluminum alloy &Tempered glass
White/Black
Suspended/Wall mounted
Available
5yrs Warranty
120Lm/W
IP65
-30°C ~ +50°C
Available accessories:
- PC reflector with or without cover - Adjustable (±45° ) or fixed surface mounting bracket
Extra Features:
- Compact & light-weight design
LM80
reflector bracket
Hig
h B
ay
Lig
hts
0 2 6 H y d r a E c o S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
90º 120º
841432
841436
841438
841434
100W
AC200-240V 3000K/4000K/5000K
>70>80 90°/120°>0.9 120Lm/W
120W
150W
200W
A
B
C
Ø287 176 76
A
mm
B
mm
C
mmWattage
Ø287Ø287
186198
7676
100W/120W150W200W
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Μeanwell Driver
/
1-10V Dimming, Motion Sensor
Aluminum & PC
White
Suspended/Wall mounted
Available
5yrs Warranty
140Lm/W
IP50
-40°C ~ +50°C
Available accessories:
- Suspension wires - Surface mounting brackets - Selection of optic lenses - Extension cables
Extra Features:
- Super-slim & minimal design - High transmitance PC or acrylic lens
LM80
bracket
Hig
h B
ay
Lig
hts
0 2 8 H y d r a L i n e a r S e r i e s
Product Parameter
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
30º 60º 90º 120º RL120º
841829
841835
841838
841832
100W
AC100-277V 3000K/4000K/5000K/5700Κ
>70>80
30°, 60°,90°, 120°, asymmetric 20°, double asymmetric 20°
>0.9 140Lm/W150W
200W
1250mm
170mm
21mm
240W
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Extra Features:
- Super-slim & minimal design - High transmitance PC or acrylic lens
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen/Meanwell Driver
Osram/Nichia LEDS
1-10V, DALI Dimming
Aluminum alloy & Tempered glass
Black/Grey
Surface or Pole mounted
Available
5yrs Warranty
120Lm/W 135Lm/W
IP66
-30°C ~ +45°C
DALI
Available accessories:
- Surface mounting bracket - Pole mounting bracket - Built-in SPD for 10 KV protection
IK08
Extra Features:
- Maintenance friendly design with buckles - Adjustable brackets by 10° increments - Version 1: Sosen driver & Osram LEDs - Version 2: Meanwell driver & Nichia LEDs - Corrosion resistant
LM80
pole bracket
Flo
od
lig
hts
0 3 0 A t l a s S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
308
841537
841567
841549
841579
841543
841573
841555
841585
841561
40W
150W
AC100-277V 3000K/4000K/5000K
>70>80>0.9 120Lm/W/
135Lm/W
60W
180W
80W
200W
100W
240W
120W15°/30°/30°x60°/65°x120°
A
A C
B
mm
366
462
B
mm
360
413
452
C
mm
82
83
88
40W/60W/80W
100W/120W/150W
180W/200W/240W
Wattage
15º 30º 30ºx60º 65ºx120º
030
60
90
120
150-/+180
-150
-120
-90
-60
-300
30
60
90
120
150-/+180
-150
-120
-90
-60
-300
30
60
90
120
150-/+180
-150
-120
-90
-60
-300
30
60
90
120
150-/+180
-150
-120
-90
-60
-30
Extra Features:
- Maintenance friendly design with buckles- Adjustable brackets by 10° increments- Version 1: Sosen driver & Osram LEDs- Version 2: Meanwell driver & Nichia LEDs- Corrosion resistant
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Meanwell / Inventronics Driver
Nichia LEDS
1-10V, DALI Dimming
Aluminum alloy, PC & Tempered glass
Black
Surface mounted
Available
5yrs Warranty
130Lm/W
IP66
-30°C ~ +50°C
Extra Features:
- Wind-test certified - Tool free assembly & disassembly - Built-in SPD, 10KV surge protection - Non-Dimmable version: Meanwell driver - DALI Dimmable version: Inventronics driver
IK08
DALI
- The modules are connected by a rotation axis, which gives a 70° rotation range to each module separately and a 40° rotation range to all the modules together.
LM80
Flo
od
lig
hts
0 3 2 A t l a s M a s t S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
841629
841637
841633
300W
AC100-240V 3000K/4000K/5000K
>70>80
>0.9 130Lm/W600W
900W
15°/30°/30°x60°/65°x120°
524mm
288mm172mm
555mm
600W300W 900W
584mm
401mm
401mm
792mm
752mm
15º 30º 30ºx60º 65ºx120º
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen/Meanwell HLG Driver
Nichia LEDS
-30°C ~ +50°C
Motion Sensor /1-10V, DALI Dimming
Aluminum alloy & PC
Red/Black
Surface mounted/Pole mounted
Available
5yrs Warranty
125Lm/W 165Lm/W
IP65
Available accessories:
- Surface mounting bracket 70º adjustable - Pole mounting bracket - All models are available with Sosen or Meanwell HLG Driver
DALI
IK10
Extra Features:
- Temperature tested at toughest conditions - Modular design (30W each module) - 10KV Surge protection by built in SPD
LM80
pole bracket
Flo
od
lig
hts
0 3 4 A t l a s P r o S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
841589
841609
841597
841617
841601
841621
841605
841625
841593
841613
60W
60WAC100-240V 3000K/4000K/
5000K>70>80 >0.9
125Lm/W
165Lm/W
90W
90W
120W
120W 60°x90°/30°x70°
60°x90°/30°x70°/ 120°
240W
240W
180W
180W
A
A
B
mm
356 315 102 60W494 315 102 90W356 515 102 120W494632
515515
102 180W102 240W
B
mm
C
mmWattage
60ºx90º 30ºx70º 120º
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Meanwell Driver
Osram LEDS
-30°C ~ +50°C
1-10V Dimming
Aluminum alloy & PC
Grey
Surface mounted
Available
5yrs Warranty
120Lm/W
IP66 IK08
LM80
Extra Features:
- 200W / module - Universally & Individually adjustable modules allow precision in
their possitioning and minimizes glare - Built-in SPD for 10KV surge protection
- A variety of optic lenses can be combined to achieve different beam angles for a uniform lighting effect that covers more distance.
Flo
od
lig
hts
0 3 6 A t l a s H i g h M a s t S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
841640
841650
841644
841646
841648
841642
841652
200W
1600W
AC100-277V 3000K/4000K/5000K
>70>80
>0.9 120Lm/W
400W
2000W
600W10°/15°/30°/ 45°/60°/20°x60°
1200W
800W
A
mm
B
mm
C
mmWattage
30º 45º 60º
0
30
60
90
120
150
-/+180
-150
-120
-90
-60
-30
030
60
90
120
150-/+180
-150
-120
-90
-60
-300
30
60
90
120
150-/+180
-150
-120
-90
-60
-30
A
B
C
321
340
340
118
222
226
200W316
419
529
400W
600W
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Xred Driver
Epistar LEDs
-40°C ~ +40°C
1-10V Dimming
Aluminum alloy
Black/Grey
Surface mounted
Available
5yrs Warranty
105Lm/W
IP65 IK08
LM79
Flo
od
lig
hts
0 3 8 H y d r a S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
46654
20382
20388
20373
20376
20379
24963
20370
20385
46678
10W
100W
150W
240W
AC100-240V 3000K/4000K/6500K
>70>0.9 105Lm/W
20W
200W
320W
35W
120°70W
50W
B
A
C A
mm
112
230
455519624
192
390
310380
B
mm
84
155
320424516
140
295
230285
C
mm
31 10W
57 35W
74133118
150W200W/240W320W
41 20W
65 100W
54 50W60.5 70W
Wattage
120º
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Moso/Meanwell HLG Driver
Sanan/Bridgelux LEDs
-40°C ~ +50°C
/
Aluminum
Black
Surface mounted
Available
5yrs Warranty
150Lm/W
IP66
Extra Features:
- Modular design (50W each module)
Available accessories:
- Adjustable brackets
LM80
Flo
od
lig
hts
0 4 0 H y d r a H i g h M a s t S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
841362
841392
841374
841380
841386
841368
841398
841404
50W
300W
AC100-277V/AC90-305V
3000K/4000K/5000K
>70>80>90
>0.9 150Lm/W
100W
400W
500W
150W
25°/40°/60°/90°250W
200W
A
A
mm
260
260
520520
260
520
348438
B
mm
105
258
348438
168
258
260260
C
C
B
mm
195 50W
195 150W
195195
400W500W
195 100W
195 300W
195 200W195 250W
Wattage
25º 40º 60º 90º
0
30
60
90
120
150
-/+180
-150
-120
-90
-60
-30
0
30
60
90
120
150
-/+180
-150
-120
-90
-60
-30
0
30
60
90
120
150
-/+180
-150
-120
-90
-60
-30
0
0
30
60
90
120
150
-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen/Meanwell Driver
LG LEDs
/
Glass & Die-cast aluminum
Black
Surface mounted
Available
5yrs Warranty
110Lm/W
IP65
-40°C ~ +50°C
Available accessories:
- Steel adjustable bracket - Extension wires
Extra Features:
- Light weight design - Thermal stable powder painting, excellent for use in coastal regions
- 50W model with Sosen Driver, 100W-150W-200W
models with Meanwell Driver
LM80
Flo
od
lig
hts
0 4 2 H y d r a P r o S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
120º
842437
842443
842446
842440
50W
AC200-277V
AC100-277V
4000K/5000K/5700K
>80>0.9 110Lm/W100W
150W120°
200W
A
A
mm
310
433405
473
B
B
mm
220
335300
366
C
C
mm
50 50W
63 150W63 100W
63 200W
Wattage
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Hongli LEDs
/
1-10V Dimming, Emergency function, Motion Sensor
Aluminum & PC
White/Silver
Suspended/Surface mounted
Available
5yrs Warranty
130Lm/W 150Lm/W 170Lm/W
IP66
Extra Features:
- Linkable design - Non - flickering driver
THD <12%
LM80
Tri
Pro
ofs
0 4 4 A t l a s M i n i S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
120º
27600
27621
27618
27603
27612
27609
27606
27615
27624
15W
40W
AC100-240V 3000K/4000K/5000K/6500K >80>0.9
130Lm/W
150Lm/W
170Lm/W
30W
15W
30W
30W
40W
120°30W
15W
A
A
mm
530
1150
1500
BB mm
74
74
74
C
C
mm
43
43
43
15W
30W
40W
Wattage
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Sosen Driver
Osram/Nichia LEDs
1-10V Dimming,Daylight sensor
Aluminum alloy & PC
Bronze
Wall mounted
Available
5yrs Warranty
130Lm/W
IP65
-30°C ~ +50°C
LM80
Extra Features:
- Corrosion resistant design - 500hrs acid-salt spray tested - Smooth design prevents dust accumulation
Wa
ll P
ac
k
0 4 6 A t l a s S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
40ºx150º
40WAC100-277V 3000K/4000K/
5000K>70>80
>0.9 130Lm/W70W
40°x150°
150mm
126mm296mm
223m
m
841421
841427
Lin
ea
r Li
gh
t
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
0 4 8
/
Everlight LEDs
/
Grey/Silver
Available
5yrs Warranty
130Lm/W 150Lm/W 170Lm/W
IP44
1-10V Dimming
Aluminum & PC
Suspended/Surface mounted
Available accessories:
- Suspended installation kit
Extra Features:
- Internal, non-flickering driver
THD <12%
LM80
A t l a s S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
200º
24139
24140
841767
24151
24152
841773
24145
24146
841770
15W
15W
15WAC100-277V
AC100-240V
3000K/4000K/5000K/6500K
>80>0.9
130Lm/W
150Lm/W
170Lm/W
30W
30W
30W
40W
40W
40W
200°
A
A
mm
600
1200
1500
B
B
mm
72
72
72
C
C
mm
42
42
42
15W
30W
40W
Wattage
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Samsung LEDs
PIR Sensor
Aluminum & PC
White
Suspended/Surface mounted
Available
3yrs Warranty
140Lm/W 100Lm/W
IP20
-20°C ~ +40°C
LM80
Extra Features:
- Internal, non-flickering driver
- Two illuminating lines for improved lighting
uniformity
- Linkable design - up to 8pcs
- WIth on/off chain switch
Sh
op
Lig
ht
0 5 0 A t l a s L i n e a r S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
110º
841304
29103
32WAC100-277V 3000K/4000K/
6500K>80>0.9
140Lm/W
100Lm/W42W110°
1219mm
133mm
49 mm
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Everlight LEDs
1-10V/DALI DimmingEmergency Function
Steel, PMMA & PC
White/Black
Suspended/Surface mounted
Available
160Lm/W
IP40
-10°C ~ +40°C
5yrs Warranty
Available accessories:
- Motion sensor, track rail power supply, E27/E14 socket modules - X, L, T, I connectors - Surface mounting kit - Suspension cord, rod or chain - Blank PC cover
IK08
DALI
Extra Features:
- Multiple options of optical lenses to achieve the desired lighting effect - Maximum lighting flexibility - Internal driver - Linkable design
LM80
Lin
ea
r Tr
un
k L
igh
t
0 5 2 L i n e a r T r u n k S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
25º 60º 90º 120º Right Asymmetric Double Asymmetric
29555
29561
29570
29564
29558
29567
35W
70mm78.2mm
70mm
70W/100W/140W
35W/50W/70W
1500mm
3000mm
78.2mm
70W
140W
70WAC100-240V 3000K/4000K/
6000K >80>0.9 160Lm/W
50W
100W
25°, 60°, 90°, 120°, right asimetric, left asimetric or double asymetric
Lighting distance
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Philips/Osram Driver
Cree/Philips LEDs
/
Aluminum
White/Black/Grey
Track mountedSurface mounted
Available
80Lm/W
IP20
-20°C ~ +40°C
5yrs Warranty
Available accessories:
- Anti glare ring - Bar-door ring - Aluminum reflector
- Integrated driver - 350° rotatable and 90° tiltable design
Extra Features:
- 3-Phase adaptor (4 wires)
LM80
adaptor for surface mounting
Tra
ck
Lig
hts
0 5 4 T r a c k L i g h t S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
18º 24º 30º 36º 45º 55º
841218
841220
841214
841216
841222
14W
28W
35W
AC220-240V 3000K/4000K/6000K >80>0.9 80Lm/W
20W
41W
18°/24°/36°
12°/ 30°/ 45°/ 55°
15°/30°/45°
A
A
B
mm
180 Ø60 14W200 Ø70 20W222 Ø85 28W240240
Ø95Ø110
35W41W
B
mmWattage
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Cree LEDs
/
1-10V Dimming
Aluminum, PMMA
White
Track mounted
Available
70Lm/W
IP205yrs Warranty
LM80
Extra Features:
- Non flickering driver - 355° rotatable and 90° tiltable design - Anti-glare effect - Rotary plate with angle markings for
accuracy in lighting control - Corrosion resistant body
Tra
ck
Lig
hts
0 5 6 T r a c k L i g h t S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
15º 24º
26519
26531
26537
26525
18W
30W
30W
AC100-240V 3000K/4000K/6500K
>80>90
>0.9 70Lm/W18W
15°
15°
24°
24°
A
A
mm
Ø75 100 45 18W Ø90 130 45 30W
B
B
mm
CC
mmWattage
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Cree LED’s
-20°C ~ +45°C
Triac/1-10V Dimming
Aluminum & PMMA
White
Recessed
Available
100Lm/W
IP655yrs Warranty
LM80
Extra Features:
- 30° tiltable design - Diamond plated lens for high light transmitance - Slim & compact design
Do
wn
lig
hts
0 5 8 I P 6 5 A d j u s t a b l e S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
36º
841292
841295
5WAC200-240V 2700K/3000K/
4000K/5000K>80>90>0.9 100Lm/W
8W36°/60°
A
A
C
mm
D80 40 D68-75 5W/8W
B
Bmm
C
mmWattage
60º
030
60
90
120
150-/+180
-150
-120
-90
-60
-300
30
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Cree LED’s
-20°C ~ +45°C
Triac/1-10V Dimming
Aluminum & PMMA
White
Recessed
Available
100Lm/W
IP655yrs Warranty
LM80
Extra Features:
- Diamond plated lens for high light transmitance - Slim & compact design
Do
wn
lig
hts
0 6 0 I P 6 5 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
841298
841301
5WAC200-240V 2700K/3000K/
4000K/5000K>80>90
>0.9 100Lm/W8W
36°/60°
A
A
C
mm
D80 40 D68-75 5W/8W
B
B
mm
C
mmWattage
36º 60º
030
60
90
120
150-/+180
-150
-120
-90
-60
-300
30
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Samsung LEDs
/
Aluminum & PMMA
White
Recessed
Available
120Lm/W
IP20
-20°C ~ +45°C
5yrs Warranty
Available accessories:
- Fast connector/junction box
UGR <19
LM80
Extra Features:
- Non flickering driver
Do
wn
lig
hts
0 6 2 U G R < 1 9 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
110º
25548
27581
25554
25551
27584
10W
15W
24W
AC100-240V 3000K/4000K/6500K
>80>0.9 120Lm/W
12W
18W
110°
A
A
mm
Ø148
Ø185
Ø235
76
66
66
Ø120
Ø160
Ø220
10W
12W
15W/18W/24W
B
B
mm
C
mmWattage
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
C
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
/
/
Triac Dimming
Aluminum & PMMA
White/Silver
Recessed
Available
3yrs Warranty
100Lm/W
Triac
IP20
LM80
Extra Features:
- White/Silver replaceable ring - Adjustable design
Do
wn
lig
hts
0 6 4 R e p l a c e a b l e R i n g S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
38º
841101
841265
5W
AC220-240V 3000K/4000K/6000K >80>0.9 100Lm/W
7W38°
A
A
C
mm
Ø86 50 Ø70 5W/7W
B
Bmm
C
mmWattage
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
841268
841271
5W
7W110°
110º
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
SMD 2835
/
Die-cast aluminum
White
Recessed/Surface mounted
Available
2yrs Warranty
80Lm/W
IP20
-40°C ~ +50°C
LM80
Extra Features:
- Their slideable spring clips make them suitable for all cutouts - Clip-on design for easy installation - Square panel can be installed in round hole - Available with external or internal driver
Do
wn
lig
hts
0 6 6 S l i d e a b l e S e r i e s R o u n d / S q u a r e
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
110º
A
AB
mm
Ø105
Ø205Ø152
Ø280
14
1414
14
Ø55-90
Ø60-185Ø60-135
Ø60-260
6W
18W12W
24W
B
mm
C
mmWattage
841310
841316
841313
841319
6W
AC200-240V 3000K/4000K/6000K >80>0.9 80Lm/W
12W
18W
24W
110°
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
0
841322
841325
841328
841331
6W
AC200-240V 3000K/4000K/6000K >80>0.9 80Lm/W
12W
18W
24W
110°
A
105
205152
280
14
1414
14
6W
18W12W
24W
Ø55-90
Ø60-185Ø60-135
Ø60-260
C
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Epistar LEDs
/
Aluminum & PC
White
Available
2yrs Warranty
80Lm/W
IP20
-20°C ~ +40°CLM80
Extra Features:
- Internal, non-flickering driver - No-screws design - Surface mounted version available
Recessed/Surface mounted
Do
wn
lig
hts
0 6 8 S l i m S e r i e s R o u n d / S q u a r e
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
120º
80731
80737
841307
80743
6W
AC180-240V 3000K/4000K/6000K
>80>0.5 80Lm/W
9W
12W
24W
18W
120°
A
AC
mm
Ø120
Ø168Ø148
Ø225Ø298
24
2424
2424
Ø107
Ø155Ø135
Ø207Ø273
6W
12W9W
18W24W
B
mm
C
mmWattage
B
27287
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
A
120
225168
298
24
2424
24
107x107
207x207156x156
279x279
6W
18W12W
24W
80749
80761
80755
27290
6W
AC180-240V 3000K/4000K/6000K >80>0.5 80Lm/W
12W
18W
24W
120°
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
magnetic rings
/
SMD 2835 LEDs
-40°C ~ +50°C
Triac/CCT Dimming
Thermal plastic
White/Black/Silver/Bronze/Gold
Recessed/Surface mounted
Available
2yrs Warranty
80Lm/W
IP20
Available accessories:
- Magnet (internal to the fixture) - Magnetic rings in 5 colours
Extra Features:
- Non-flickering driver - Square version available - Their slideable spring clips make them suitable
for all cutouts - Clip-on design for easy installation
LM80
CCTdimming Triac
Do
wn
lig
hts
0 7 0 L E D M a g n e t i c S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
841817
841823
841820
841826
6W
AC200-240V 3000K/4000K/6000K >80>0.5 80Lm/W
12W
18W
24W
110°
A
Cmm
Ø140
Ø217
Ø165
Ø290
15
15
15
15
Ø55-100
Ø55-175
Ø55-125
Ø55-250
6W
18W
12W
24W
B
mm
C
mmWattage
A
B
110º
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
0
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Samsung LED’s
/
Aluminum
Silver
Recessed
Available
5yrs Warranty
100Lm/W 150Lm/W
IP20
-20°C ~ +45°C
LM80
Extra Features:
- Smaller sizes available
Do
wn
lig
hts
0 7 2 C o m p a c t S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
150Lm/W
100º
841682
841685
12WAC220-240V 3000K/4000K/
6000K >80>0.924W
100°
A
A
B
C
mm
Ø230 92 Ø210 12W/24W
B
mm
C
mmWattage
100Lm/W
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Lifud Driver
Samsung
/
1-10V/Triac/Dali DimmingEmergency Sensor
Triac Dali
Auminum
Frosted cover
Surface mounted
Available
5yrs Warranty
100Lm/W
IP65 IK10
LM80
Ce
ilin
g L
igh
ts
0 7 4 L E D C e i l i n g L i g h t s S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
120º
841691
841694
841700
841706
841712
841697
841703
841709
12W
AC220-240V 3000K/4000K/5700K >80>0.9 100Lm/W
18W
25W
30W
40W
25W
30W
35W
120°
Amm
Ø270
Ø320
Ø420
Ø520
Bmm
70
70
85
85
12W
18W/25W
25W/30W
30W/35W/40W
Wattage
B
A
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Samsung LEDs
1-10V Dimming
Aluminum, PMMA, PS
White
Recessed, Suspended, Surface mounted
Available
5yrs Warranty
100Lm/W 150Lm/W
IP20
-20°C ~ +40°C
Available accessories:
- Suspended installation kit - Surface mounted installation kit
Extra Features:
- Internal non-flickering driver - 2.5KV Surge protection - Special lens for even light distribution
LM80
Pa
ne
l Li
gh
ts
0 7 6 B a c k L i g h t S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
110º
840412
23393
24701
25W
AC220-240V 2700K/4000K/6500K
>80>0.9
150Lm/W
100Lm/W36W
36W
110°
Amm
595
1195
B Bmm mm
595 38
295 38
25W/36W
36W
Wattage
A
A
C
C
B
B
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Samsung 2835
1-10V Dimming
Auminum & PMMA
White
Available
5yrs Warranty
120Lm/W
IP20
-20°C ~ +40°C
Recessed, Suspended, Surface mounted
Available accessories:
- Suspended installation kit - Surface mounting kit
UGR <19
LM80
Extra Features:
- Non flickering driver
Pa
ne
l Li
gh
ts
0 7 8 S l i m S e r i e s U G R < 1 9
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
27968
27721
30WAC100-240V
2700K/4000K/6500K >80>0.9
120Lm/W30W
110°
Amm
595
1195
B Cmm mm
595 10
295 10
30W/36W
30W/36W
Wattage
A
A
C
C
B
B
110º
27715
27723
36W
36W110Lm/W
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files Available
5yrs Warranty
130Lm/W 140Lm/W 110Lm/W
IP20
/
Samsung 2835
1-10V Dimming
Auminum & PMMA
White
-20°C ~ +40°C
Recessed, Suspended
Available accessories:
- Suspended installation kit
LM80
Extra Features:
- Non flickering driver
Pa
ne
l Li
gh
ts
0 8 0 S l i m S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
29105
841677
29267
29265
841679
29271AC100-240V 3000K/4000K/
6500K>80>0.9
110Lm/W
140Lm/W
130Lm/W110°
Amm
595
1195
B Cmm mm
595 10
295 10
30W/25W/36W
30W/25W/36W
Wattage
A
A
C
C
B
B
36W
25W
30W
36W
25W
30W
110º
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
Lifud Driver
SMD 2835
1-10V Dimming
Auminum & PC
White
Ressesed/Suspended/Surface mounted
Available
3yrs Warranty
80Lm/W
IP20
-25°C ~ +60°C
Extra Features:
- Non-flickering driver - Innovative linkable design - Compact packaging for low-cost storage &
transportation
90Lm/W 100Lm/W LM80
Pa
ne
l Li
gh
ts
0 8 2 D I Y F r a m e P a n e l S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
* Products without CE certification.
103º
841247
841244
40WAC220-240V 2700K/4000K/
6500K>80>0.9 80Lm/W
24W103°
Amm
587
275
Bmm
587
587
40W
40W/20W */40W * 24W/ 20W */40W */60W *
24W
Wattage
A A
B B
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
841250 *
841259 *
841256 *
841262 *
841253 *
20W
40W
AC170-265V 3000K/4000K/6000K >80>0.5
90Lm/W
90Lm/W
100Lm/W40W
60W
24W 103°
275
275
587
275
575
275
578
587
1178
1178
20W *
24W *
40W *
40W *
60W *
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Everlight
/
PC Cover
Frosted cover
/
Available
5yrs Warranty
140Lm/W
IP20
-20°C ~ +45°C
Extra Features:
- Compatible with HF ballasts - Replaces existing fluorescent tubes with ECG
directly - no rewiring needed - Linear driver & relay for increased compatibility
LM80
Tub
es
0 8 4 E C G T 8 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
840091
840094
840097
8W
AC220-240V 3000K/4000K/6500K
>80>0.9 140Lm/W14.5W
20W
160°
Amm
600
1200
1500
Bmm
Ø27.5
Ø27.5
Ø27.5
8W
14.5W
20W
WattageA
B
160º
030
60
90
120
150-/+180
-150
-120
-90
-60
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Everlight
/
Glass cover
Frosted cover
/
Available
5yrs Warranty
150Lm/W
IP20
-20°C ~ +45°C
LM80
Available accessories:
- Rotatable caps available
Extra Features:
- Suitable for direct AC input
Tub
es
0 8 6 A C G l a s s T 8 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
29606
29609
29612
29615
7.3W
AC220-240V 3000K/4000K/6500K
>80>0.9 150Lm/W11.3W
14W
20.6W
160°
Amm
600
900
1200
1500
Bmm
Ø27.5
Ø27.5
Ø27.5
Ø27.5
7.3W
11.3W
14W
20.6W
WattageA
B
160º
030
60
90
120
150-/+180
-150
-120
-90
-60
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Everlight
/
PC cover
/
/
Available
5yrs Warranty
150Lm/W
IP20
-20°C ~ +45°C
LM80
Extra Features:
- ECG, CCG & AC compatible
- Plug & Play compatibility with HF or EM ballasts
- Reiwiring is needed only for direct AC input
Tub
es
0 8 8 U n i v e r s a l l y C o m p a t i b l e T 8 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
200º 180º
841967
841970
841973
7.5W
AC220-240V 3000K/4000K/6500K >80>0.9 150Lm/W16W
24W
200°
180°
A
B
Amm
590
1200
1500
Bmm
Ø27.3
Ø27.3
Ø27.3
7.5W
16W
24W
Wattage
030-30
60
90
120
150-/+180
-150
-120
-90
-60
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Samsung
/
/
PC cover & Aluminium heat sink
Frosted cover
/
Available
5yrs Warranty
150Lm/W 170Lm/W
IP20
LM80
Tub
es
0 9 0 A C A l u m i n u m & P C T 5 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
120º
841051
841054
841057
841060
18W
AC100-130VAC200-240V
2700K/4000K/6500K >80>0.9
150Lm/W
170Lm/W
25W
30W
35W
120°
AA mm
1199
1499
B
B
mm
Ø23
Ø23
18W
25W/30W/35W
Wattage
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Everlight
/
Glass
Frosted cover
/
Available
5yrs Warranty
150Lm/W
IP20
-20°C ~ +45°C
LM80
Extra Features:
- LED starter included - Compatible with HF ballasts - Replaces existing fluorescent tubes with ECG
directly - no rewiring needed
Tub
es
0 9 2 E C G G l a s s T 5 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
160º
29936
29942
29945
27W
AC220-240V 3000K/4000K/6500K >80>0.9 150Lm/W26W
37W
160°
A
Amm
1500
1200
B
B
mm
Ø19
Ø19
26W/37W
27W
Wattage
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Everlight
/
Glass
Frosted cover
/
Available
5yrs Warranty
150Lm/W
IP20
-20°C ~ +45°C
LM80
Extra Features:
- Suitable for direct AC input
Tub
es
0 9 4 A C G l a s s T 5 S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
160º
29591
29597
27WAC220-240V 3000K/4000K/
6500K >80>0.9 150Lm/W26W
160°
A
Amm
1200
1500
B
B
mm
Ø19
Ø19
27W
26W
Wattage
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
Hongli 2835
/
3-Step Dimming
PC cover & Alumin um
Silver
Surface mounted, Recessed
Available
5yrs Warranty
100Lm/W
IP40
Available accessories:
- Double-sided connector
Extra Features:
- Internal driver - Linkable design up to 350W - Seamless connection - No dark spots - Specifically designed for space limited
applications
LM80
connector
Co
mp
ac
t Li
ne
ar
Lig
hts
0 9 6 L i n k a b l e L i g h t B a r S e r i e s
Product Parameter
Light Distribution Diagram
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
120º
89782
89788
89785
4W
16W
AC200-240V 3000K/4000K/6500K
>800.9 100Lm/W8W 120°
AA
mm
300
600
1200
B
B mm
20
20
20
C
C
mm
25
25
25
4W
8W
16W
Wattage
0
±180-150
-120
-60
-303 0
60
90
120
150
-90
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
/
/
1-10V Dimming
PMMA Lens & Aluminium Shell
Frosted cover
/
Available
5yrs Warranty
100Lm/W
IP20
Available accessories:
- Double-sided connectors - Button dimmer - LED adaptor - 1.2m terminal wire for connecting light & driver
Extra Features:
- Structure with springs for easy installation - Extremely compact design
LM80
Co
mp
ac
t Li
ne
ar
Lig
hts
0 9 8 L i n k a b l e L i g h t B a r S e r i e s 2 4 V
Product Parameter
Light Distribution Diagram
Dimensions
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
50º 60º
841280
841286
841289
841283
1.6W
7.2W
9.7W
24VDC 2700K/3000K/4000K/5000K >80>0.5 100Lm/W
2.4W50°, 60°
A
A
B
C
mm
200
300
860
1160
Bmm
10
10
10
10
Cmm
10
10
10
10
1.6W
2.4W
7.2W
9.7W
Wattage
030
60
90
120
150-/+180
-150
-120
-90
-60
-300
30
60
90
120
150-/+180
-150
-120
-90
-60
-30
Features & CertificatesSpecifications
Driver Brand
LED Chip
Operating Temperature
Smart Control Options
Material
Color
Installation Options
IES Files
/
SMD 2835
/
Aluminum & PC
White
/
Available
2yrs Warranty
90Lm/W 75Lm/W
IP20
-20°C ~ +50°C
Available accessories:
- PC reflectors - E27 to E40 adaptor
Extra Features:
- Large heat sink for optimal heat dissipation - Suitable for installation at up to 8 meters - Can be combined with reflectors for wider light distribution
LM80
reflector
T-B
ulb
s
1 0 0 H y d r a S e r i e s
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Product Parameter
Light Distribution Diagram
Dimensions
180º
840386
840397
840350
840403
841343
840406
840392
840400
28W
80W
48W
150W
58W
200W
AC165-265V
AC165-265V
3000K/4000K/5000K/6500K
3000K/4000K/5000K/6500K
>80
>80
>0.5
>0.5
90Lm/W
75Lm/W
38W
100W
180°
180°
A
B
mm
Ø101
Ø142
Ø125
195
296
247
28W
80W/100W
48W Ø115
Ø160
Ø142
207
323
268
38W
150W/200W
58W
B
A
mmWattage
0
±180-150
-120
-90
-60
-303 0
60
90
120
150
Warranty Policy
Warranty for IINNO-Branded Professional LED LuminairesThis document sets out the warranty policy of Provident (PP) from which you purchase your professional lunimaires.
Terms and Condition
1. This warranty is only applicable to PP branded lighting products sold by PP Limited (hereinafter referred to as ‘Product’).
2. The warranty is only applicable to the party purchasing the products directly from PP (Hereinafter referred to as ‘Purchaser’). Third party products sold by PP are not covered under this warranty. With respect to products sold to the Purchaser by PP, but not bearing the PP name or sub-brands, PP makes no warranty of any kind, express or implied, including, without limitation, any warranty of merchantability or fitness for a particular purpose, but will make available to the Purchaser upon request, but only to the extent permitted by law and relevant contracts, the warranties of the manufacturer of the relevant product.
3. No agent, distributor or dealer is authorized to change, modify or extend the terms of the warranty on behalf of PP.
4. PP warrants that each Product will be free from defects in material and workmanship. The foregoing warranty shall be valid for the period mentioned in the applicable warranty clause for the Products referred to in PP’s confirmation of your PI.
5. The warranty term starts from the production date printed on the products used in professional applications.
6. The warranty period is based on a burning behaviour of max. 4000 hours/year. In case of more than 4000 hours/year, the warranty period will be adjusted pro-rata.
7. This warranty only applies when the Product has been properly wired and installed and operated within the electrical values, operating range and environmental conditions provided in the specifications, application guidelines, IEC standards or any other document accompanying the Products.
Additionally, installation must be performed only by authorized personnel, who will establish that the above mentioned precautions will be taken under consideration.
8. This warranty does not apply to damage or failure to perform arising as a result of any Acts of God or from any abuse, existing local network (or Public grid) failure, misuse, abnormal use or use in violation of any applicable standard, code or instructions for use, including without limitation, those contained in the latest safety, industry and/or electrical standards for the relevant region(s).
9. PP reserves the right to the validity of a guarantee claim. For this purpose, the Purchaser must return, with sufficient postage, for analysis (enclosing a copy of the delivery note or the invoice).
10. Within the applicable warranty period and on examination PP determines to its satisfaction that such Product failed to satisfy this warranty, PP will, at its option, repair or replace the Product or the defective part thereof, or reimburse Purchaser the purchase price. For purposes of clarity, ‘repair or replace the Product or the defective part thereof’ does not include any removal or reinstallation activities, costs or expenses, including without limitation, labor costs or expenses.
11. If PP chooses to replace the Product and is not able to do so because it has been discontinued or is not available, PP may refund the purchaser or replace the product with a comparable product (that can show small deviations in design and product specification).
12. Warranty claims have to be reported and returned to PP office within 30 days after discovery, specifying at least the following information (additional information may be required on request):
Details of the failed Products; and for System warranties also details of other components used; Installation date and invoice date;
Detailed problem description, number and % of failures date-code of failure; Application, hours burned and number of switching cycles.
13. Where a warranty claim is justified, PP will pay for freight expenses. PP may charge Customer for returned Products that are not found to be defective or non-conforming together with the freight, testing and handling costs associated therewith.
14. The warranty and remedies contained in this warranty are the only warranties given by PP with respect the Products and are given in lieu of all other warranties, whether express or implied, including without limitation warranties of merchantability or fitness for a particular purpose, which warranties are hereby disclaimed.
15. These terms and conditions state PP’s entire liability and obligation to Purchaser and Purchaser’s sole and exclusive remedy in connection with defective or non-conforming Products supplied by PP to Customer, whether or not such damages are based on any warranty not explicitly mentioned in these terms and conditions, tort, contract or any other legal theory, even if PP has been advised or is aware of such defects.
16. This is a limited warranty and excludes, among other items, installation, providing access to products (scaffolding, lifts, etc.), and special, incidental and consequential damages (such as loss of revenue/profits, damage to property or other miscellaneous costs not previously mentioned), and is further defined by the limitations and conditions set forth in the respective warranty policy and these terms and conditions.
17. Upon request, PP’S representatives shall be allowed access to the defective Product, system or application for verification of non-compliance.
18. PP cannot be held liable for electrical supply conditions, including supply spikes, over-voltage/under-voltage and Ripple Current control systems that are beyond the specified limits of the products and those defined by relevant supply standards (e.g. EN 50160 norms).
Suite 109, 1st FloorThe CatalystEbène [email protected]
https://provprocure.com/
+27 (0) 818 716 522