32
PREFACE SUMMARY OF THE PRODUCTS: 1. Various I/O Boards for symmetrical and asymmetrical PDH signal distribution with special interconnection cables to fit all equipment types 2. Cable assemblies for power, traffic or control signals 3. RF accessories: hybrids, adaptors, coaxial cables, OMTs.. etc to further enhance NEC Microwave equipment configuration versatility (1+0, 1+1, 2+0.. system) 4. Measuring tools and systems for test and demonstration purposes Page ii This catalogue introduces the product portfolio offered by Scientis Solutions Ltd. for mainly NEC microwave equipment. These products include base-band connection interfaces, RF accessories and These products include base-band connection interfaces, RF accessories and measuring tools and all of these accessories were developed and manufactured based on specific customer requirements in accordance with the quality standards of NEC Corporation. CATALOGUE April 2010 Indoor Accessories RF Accessories Measuring tools

Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

  • Upload
    lelien

  • View
    290

  • Download
    3

Embed Size (px)

Citation preview

Page 1: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

PREFACE

SUMMARY OF THE PRODUCTS:

1. Various I/O Boards for symmetrical and asymmetrical PDH signal distribution with special

interconnection cables to fit all equipment types

2. Cable assemblies for power, traffic or control signals

3. RF accessories: hybrids, adaptors, coaxial cables, OMTs.. etc to further enhance NEC Microwave

equipment configuration versatility (1+0, 1+1, 2+0.. system)

4. Measuring tools and systems for test and demonstration purposes

Page ii

This catalogue introduces the product portfolio offered by Scientis Solutions Ltd. for mainly NEC microwave equipment. These products include base-band connection interfaces, RF accessories and These products include base-band connection interfaces, RF accessories and measuring tools and all of these accessories were developed and manufactured based on specific customer requirements in accordance with the quality standards of NEC Corporation.

CATALOGUEApril 2010

Indoor Accessories RF Accessories Measuring tools

Page 2: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

CONTENTSA. INDOOR ACCESSORIES (GP SERIES)

1. I/O Boards2. Cable Assemblies3. I/O Board Sets4. Pin Layout

B. RF ACCESSORIES (IS SERIES)

1. OMT (Ortho Mode Transducer)2. Hybrid for 2 ODUs3. Hybrid for 4 ODUs (Single Polarization)4. Hybrid for 4 ODUs (Dual Polarization)5. Mounting Bracket6. Waveguide Transducer7. Low Loss Cables

C. Measuring Tools (IS Series)

1. Measuring Tools

PAGE

1 - 67 - 1112 - 1314

1516 - 2122 - 2324 - 25262728

29

Page i

Page 3: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

I/O BOARD CONNECTION GUIDEI/O BOARD CONNECTION BETWEEN RADIO (IDU) AND I/O BOARD

Page 1

SAMPLE 1: I/O BOARD SET FOR 16E1 WITH BNC CONNECTOR PART NO. NEC-10BSET-N16-32-BNC

SAMPLE 2: I/O BOARD SET FOR 32E1 WITH SMB CONNECTOR PART NO. NEC-10BSET-N48-64MB-SMB

Incl: 1pc NEC -10B-32 BNC 2pcs NEC-TRCB-D37-SCRW

Incl: 1pc NEC -10B-32 BNC 2pcs NEC-TRCB-D37-SCRW

Connector Guide

IDU – INTERFACE CARD (e.g.) 2M IN/OUT

INTERFACE

CONNECTOR

PHOTO

PASOLINK NEO – 16E1 DSUB 37 pin

connector

PASOLINK NEO – 32E1 MDR 68 pinconnector

CONNECTOR GUIDE

IDU – I/O Board connection

SCHEMATIC DRAWING BACK SIDE OF THE I/O BOARD

Page 4: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)

1.1

1. I/O BOARDS

Specification • Capacity: 16E1

• BNC socket connectors (32pcs)

• 1U high

• 19” rack compatible

• 2xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 2pcs)

or

• MDR68-2xDSUB37 interconnection cable

• (NEC-TRCB-M68-STD)

• for ordering I/O Board with cables see I/O Board Sets

Page 2

I/O BOARD FOR 16E1 WITH BNC CONNECTORS PART NO.: NEC-IOB-32M-BNC

1.2

Specification • Capacity: 16E1

• 1.6/5.6 socket connectors (32pcs)

• 1U high

• 19” rack compatible

• 2xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 2pcs)

or

• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 16E1 WITH 1.6/5.6 CONNECTORS PART NO.: NEC-IOB-32M-1656

1.3

Specification • Capacity: 16E1

• SMZ (BT43) male connectors (32pcs)

• 1U high

• 19” rack compatible

• 2xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 2pcs)

or

• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 16E1 WITH SMZ (BT43) CONNECTORS PART NO.: NEC-IOB-32M-SMZ

1.4

Specification • Capacity: 48E1

• SMB male connectors (96pcs)

• 1U high

• 19” rack compatible

• 6xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 3pcs)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 48E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-96M-SMB

Page 5: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)

1.5

1. I/O BOARDS

Specification • Capacity: 32E1

• SMB male connectors (64pcs)

• 1U high

• 19” rack compatible

• 4xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 2pcs)

• for ordering I/O Board with cables see I/O Board Sets

Page 3

I/O BOARD FOR 32E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-64M-SMB

1.6

Specification • Capacity: 16E1

• SMB male connectors (32pcs)

• 1/2U high

• 19” rack compatible

• 2xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 2pcs)

or

• MDR68-2xDSUB37 interconnection cable (NEC-TRCB-

M68-STD)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 16E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-32M-SMB

1.7

Specification • Capacity: 48E1

• 1.0/2.3 socket connectors (96pcs)

• 1U high

• 19” rack compatible

• 6xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 3pcs)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 48E1 WITH 1.0/2.3 CONNECTORS PART NO.: NEC-IOB-96M-1023

1.8

Specification • Capacity: 16E1

• 1.0/2.3 socket connectors (32pcs)

• 1/2U high

• 19” rack compatible

• 2xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 2pcs)

or

• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 16E1 WITH 1.0/2.3 CONNECTORS PART NO.: NEC-IOB-32M-1023

Page 6: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)

1.9

1. I/O BOARDS

Specification • Capacity: 48E1

• 6xDSUB37 cut-outs

• 1/2U high

• 19” rack compatible

• RoHS compliant

Cable Accessories

• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 3pcs)

• for ordering I/O Board with cables see I/O Board Sets

Page 4

1.10

Specification • Capacity: 48E1

• RJ45 socket connectors (48pcs)

• 1U high

• 19” rack compatible

• 6xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 3pcs)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 48E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-96M-RJ45

1.11

Specification • Capacity: 32E1

• RJ45 socket connectors (32pcs)

• 1U high

• 19” rack compatible

• 4xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 2pcs)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 32E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-64M-RJ45

1.12

Specification • Capacity: 24E1

• RJ45 socket connectors (24pcs)

• 1U high

• 19” rack compatible

• 3xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 1pc)

• MDR68-1xDSUB37 interconnection cable

(NEC-TRCB-M68/2-STD; 1pc)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 24E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-48M-RJ45

I/O BOARD FOR 48E1 WITH D-SUB37 CONNECTORS PART NO.: NEC-IOB-96M-DSUB(FIXING FRAME FOR MDR-DSUB INTERCONNECTION CABLES)

Page 7: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)

1.13

1. I/O BOARDS

Specification • Capacity: 16E1

• RJ45 socket connectors (16pcs)

• 1/2U high

• 19” rack compatible

• 2xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 2pcs)

or

• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD)

• for ordering I/O Board with cables see I/O Board Sets

Page 5

I/O BOARD FOR 16E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-32M-RJ45

1.14

Specification • Capacity: 4E1

• BNC socket connectors (8pcs)

• 1/2U high

• 19” rack compatible

• 1xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories

• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 1pc)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 4E1 WITH BNC CONNECTORS PART NO.: NEC-IOB-8M-BNC

1.15

Specification • capacity: 4E1

• 1.6/5.6 socket connectors (8pcs)

• 1/2U high

• 19” rack compatible

• 1xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• DSUB37-DSUB37 interconnection cable

(NEC-TRCB-D37-SCRW; 1pc)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 4E1 WITH 1.6/5.6 CONNECTORS PART NO.: NEC-IOB-8M-1656

1.16

Specification • Capacity: 40E1

• SMB male connectors (80pcs)

• 1U high

• 19” rack compatible

• 5xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories

• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 2pcs)

• MDR36-DSUB37 interconnection cable

(NEC-TRCB-M36-SCRW; 1pc)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 40E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-80M-SMB

Page 8: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)

1.17

1. I/O BOARDS

Specification • Capacity: 40E1

• 1.0/2.3 socket connectors (80pcs)

• 1U high

• 19” rack compatible

• 5xDSUB37 plug connectors on the rear

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 2pcs)

• MDR36-DSUB37 interconnection cable

(NEC-TRCB-M36-SCRW; 1pc)

• for ordering I/O Board with cables see I/O Board Sets

Page 6

I/O BOARD FOR 40E1 WITH 1.0/2.3 CONNECTORS PART NO.: NEC-IOB-80M-1023

1.18

Specification • Capacity: 40E1

• 5xDSUB37 cut-outs

• 1/2U high

• 19” rack compatible

• RoHS compliant

Cable Accessories• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 2pcs)

• MDR36-DSUB37 interconnection cable

(NEC-TRCB-M36-STMP; 1pc)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 40E1 WITH D-SUB37 CONNECTORS PART NO.: NEC-IOB-80M-DSUB(FIXING FRAME FOR MDR-DSUB INTERCONNECTION CABLES)

1.19

Specification • Capacity: 40E1

• RJ45 socket connectors (40pcs)

• 1U high

• 19” rack compatible

• 5xDSUB37 plug connectors on the rear

• RoHS compliantr

Cable Accessories

• MDR68-2xDSUB37 interconnection cable

(NEC-TRCB-M68-STD; 2pcs)

• MDR36-DSUB37 interconnection cable

(NEC-TRCB-M36-SCRW; 1pc)

• for ordering I/O Board with cables see I/O Board Sets

I/O BOARD FOR 40E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-80M-RJ45

Page 9: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

2.3

Specification

• For connecting I/O Board to IDU

(PASOLINK Mx – 8E1 INTFC)

• Capacity: 8E1

• Connectors: MDR36 plug (IDU side), DSUB37

socket (I/O Board side)

• DSUB37 socket with locking screws

• 1m (standard length)

• RoHS compliant

MDR36-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-M36-SCRWSCRW (SCREW) TYPE

2.4

Specification

• Used with DSUB I/O Board

(for PASOLINK Mx – 8E1 INTFC)

• Capacity: 8E1

• Connectors: MDR36 plug (IDU side),

DSUB37 socket (I/O Board side)

• DSUB37 socket with stumps

• 1m (standard length)

• RoHS compliant

MDR36-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-M36-STMPSTMP (STUMP) TYPE

A. Indoor Accessories (GP series)2. CABLE ASSEMBLIES

Page 7

2.2

Specification

• For connecting I/O Board to IDU (e.g. PASOLINK NEO – 48E1 INTFC)

• Capacity: 16E1

• Connectors: MDR68 plug (IDU side), 2xDSUB37 socket (I/O Board side)

• DSUB37 socket with locking screws/stumps

• 1m (standard length)

• RoHS compliant

MDR68-2XDSUB37 INTERCONNECTION CABLE FOR 16E1 PART NO.: NEC-TRCB-M68-STD

2.1

Specification

• For connecting I/O Board to IDU (e.g. PASOLINK NEO - 16E1 INTFC)

• Capacity: 8E1

• Connectors: DSUB37 plug (IDU side), DSUB37 socket (I/O Board side)

• DSUB37 socket with locking screws

• 1m (standard length)

• RoHS compliant

DSUB37-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-SCRW

Page 10: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)2. CABLE ASSEMBLIES

Page 8

2.7

Specification

• Used with DSUB I/O Board

• Alcatel pin layout on DSUB37 according to customer request

• Capacity: 16E1

• Connectors: MDR68 plug (IDU side), 2xDSUB37 socket (I/O Board side)

• DSUB37 socket with stumps

• 2m

• RoHS compliant

MDR68-2XDSUB37 INTERCONNECTION CABLE FOR 16E1 PART NO.: NEC-TRCB-M68-ALC-22M, ALC (ALCATEL) TYPE

2.6

Specification

• Used with DSUB I/O Board

• Alcatel pin layout on DSUB37 according to customer request

• Capacity: 16E1

• Connectors: MDR68 plug (IDU side), 2xDSUB37 socket (I/O Board side)

• DSUB37 socket with stumps

• 1m (standard length)

• RoHS compliant

MDR68-2XDSUB37 INTERCONNECTION CABLE FOR 16E1 PART NO.: NEC-TRCB-M68-ALCALC (ALCATEL) TYPE

2.5

Specification

• For connecting I/O Board to IDU

(e.g. PASOLINK NEO – 32E1 INTFC; for the upper 8E1 in 20x2M mode)

• Capacity: 8E1

• Connectors: MDR68 plug (IDU side), DSUB37 socket (I/O Board side)

• DSUB37 socket with locking screws/stumps

• 1m (standard length)

• RoHS compliant

MDR68-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-M68/2-STD

2.8

Specification

• For Back to Back connections

• Capacity: 16E1

• Connectors: 2xMDR68 plug

• 0.5m (standard length)

• RoHS compliant

MDR68-MDR68 BACK TO BACK CABLE - 0.5M PART NO.: NEC-TRCB-M68-X-M68-0,5

Page 11: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)

2.9

2. CABLE ASSEMBLIES

Specification

• For IDU to DDF connections

• Capacity: 4E1

• Cable: 8 cores coaxial

• Connectors: DSUB37 plug

• Last digit defines the length

• RoHS compliant

Page 9

DSUB37– 8 CORES COAX – OPEN END CABLE FOR 4E1 PART NO.: NEC-TRCB-D37-8C-2

2.10

Specification

• For IDU to DDF connections

• Capacity: 4E1

• Cable: 8 cores coaxial

• Connectors: DSUB37 plug, 8x1.6/5.6 socket

• Last digit defines the length

• RoHS compliant

DSUB37– 8 CORES COAX – 8X1.6/5.6 CABLE FOR 4E1 PART NO.: NEC-TRCB-D37-8C-1656-2

2.12

Specification

• For IDU to DDF connections

• Capacity: 8E1

• Cable: 16 cores coaxial

• Connectors: DSUB37 plug, 16x1.6/5.6 socket

• Last digit defines the length

• RoHS compliant

DSUB37– 16 CORES COAX – 16X1.6/5.6 CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-16C-1656-2

2.11

Specification

• For IDU to DDF connections

• Capacity: 8E1

• Cable: 16 cores coaxial

• Connectors: DSUB37 plug

• Last digit defines the length

• RoHS compliant

DSUB37– 16 CORES COAX – OPEN END CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-16C-2

Page 12: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series) 2. CABLE ASSEMBLIES

Page 10

2.15

Specification

• For IF interconnection

• Cable assembly: TNC right angle plug, N straight plug – 2m

• Adaptor: N socket – N socket

• IF fixing frame with 10 positions

• RoHS compliant

N-TNC IF JUMPER CABLE + N-N ADAPTER + IF FIXING FRAME PART NO.: NEC-JCBSET-N2-2

2.14

Specification

• For IF interconnection

• Cable assembly: TNC right angle plug, N straight plug – 2m

• Adaptor: N socket – N socket

• RoHS compliant

N-TNC IF JUMPER CABLE + N-N ADAPTER PART NO.: NEC-JCBSET-N1-2

2.13

Specification

• For IDU to DDF connections

• Capacity: 8E1

• Cable: 16 twisted pair (0,4mm solid wire)

• Connectors: DSUB37 plug

• Last digit defines the length

• RoHS compliant

DSUB37– 16 TWISTED PAIR – OPEN END CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-16TP-5

2.16

Specification

• For PASOLINK NEO XPIC cabling

• CTRL cable assembly: 2xDSUB15HD plug (1pc)

• XIF cable assembly: 2x1.0/2.3 plug auto locking type (2pcs)

• 0,4m (standard length)

• RoHS compliant

NEO XPIC CABLE SET (1+0) PART NO.: NEC-XCBSET-NEO(1+0)-0,4

Page 13: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)2. CABLE ASSEMBLIES

Page 11

2.17

Specification

• For power cabling of PASOLINK family

• Mini-Fit 4,2mm 4P connector

• MT 2x0,75mm2 power cable

• 5,10m standard lengths

• RoHS compliant

10M POWER CABLE WITH MOLEX CONNECTOR PART NO.: NEC-PWCB-MOLEX-2X0,75-10

Page 14: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)3. I/O BOARD SETS

Page 12

3.1

1.) I/O Board Set for 16E1 with BNC connectors Part No.: NEC-IOBSET-N16-32M-BNC (Refer to item 1.1 & 2.1)

Includes: 1pc NEC-IOB-32M-BNC

2pcs NEC-TRCB-D37-SCRW

2.) I/O Board Set for 16E1 with 1.6/5.6 connectors Part No.: NEC-IOBSET-N16-32M-1656 (Refer to item 1.2 & 2.1)

Includes: 1pc NEC-IOB-32M-1656

2pcs NEC-TRCB-D37-SCRW

3.) I/O Board Set for 16E1 with SMZ connectors Part No.: NEC-IOBSET-N16-32M-SMZ (Refer to item 1.3 & 2.1)

Includes: 1pc NEC-IOB-32M-SMZ

2pcs NEC-TRCB-D37-SCRW

4.) I/O Board Set for 16E1 with SMB connectors Part No.: NEC-IOBSET-N16-32M-SMB (Refer to item 1.6 & 2.1)

Includes: 1pc NEC-IOB-32M-SMB

2pcs NEC-TRCB-D37-SCRW

5.) I/O Board Set for 16E1 with 1.0/2.3 connectors Part No.: NEC-IOBSET-N16-32M-1023 (Refer to item 1.8 & 2.1)

Includes: 1pc NEC-IOB-32M-1023

2pcs NEC-TRCB-D37-SCRW

6.) I/O Board Set for 16E1 with RJ45 connectors Part No.: NEC-IOBSET-N16-32M-RJ45 (Refer to item 1.13 & 2.1)

Includes: 1pc NEC-IOB-32M-RJ45

2pcs NEC-TRCB-D37-SCRW

PASOLINK NEO – PDH 16E1 INTERFACE (OR PASOLINK V4 – 16E1)

3.2

1.) I/O Board Set for 48E1 with BNC connectors Part No.:NEC-IOBSET-N48-3x32M-BNC (Refer to item 1.1 & 2.2)Includes: 3pcs NEC-IOB-32M-BNC

3pcs NEC-TRCB-M68-STD2.) I/O Board Set for 48E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-N48-3x32M-1656 (Refer to item 1.2 & 2.2)

Includes: 3pcs NEC-IOB-32M-16563pcs NEC-TRCB-M68-STD

3.) I/O Board Set for 48E1 with SMZ connectors Part No.:NEC-IOBSET-N48-3x32M-SMZ (Refer to item 1.3 & 2.2)Includes: 3pcs NEC-IOB-32M-SMZ

3pcs NEC-TRCB-M68-STD4.) I/O Board Set for 48E1 with SMB connectors Part No.:NEC-IOBSET-N48-96M-SMB (Refer to item 1.4 & 2.2)

Includes: 1pc NEC-IOB-96M-SMB3pcs NEC-TRCB-M68-STD

5.) I/O Board Set for 48E1 with 1.0/2.3 connectors Part No.:NEC-IOBSET-N48-96M-1023 (Refer to item 1.7 & 2.2)Includes: 1pc NEC-IOB-96M-1023

3pcs NEC-TRCB-M68-STD6.) I/O Board Set for 48E1 with DSUB connectors Part No.:NEC-IOBSET-N48-96M-DSUB (Refer to item 1.9 & 2.2)

Includes: 1pc NEC-IOB-96M-DSUB3pcs NEC-TRCB-M68-STD

7.) I/O Board Set for 48E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-96M-RJ45 (Refer to item 1.10 & 2.2)Includes: 1pc NEC-IOB-96M-RJ45

3pcs NEC-TRCB-M68-STD

PASOLINK NEO – PDH 48E1 INTERFACE

3.3

1.) I/O Board Set for 32E1 with BNC connectors Part No.:NEC-IOBSET-N48-2x32M-BNC (Refer to item 1.1 & 2.2)Includes: 2pcs NEC-IOB-32M-BNC

2pcs NEC-TRCB-M68-STD2.) I/O Board Set for 32E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-N48-2x32M-1656 (Refer to item 1.2 & 2.2)

Includes: 2pcs NEC-IOB-32M-16562pcs NEC-TRCB-M68-STD

3.) I/O Board Set for 32E1 with SMZ connectors Part No.:NEC-IOBSET-N48-2x32M-SMZ (Refer to item 1.3 & 2.2)Includes: 2pcs NEC-IOB-32M-SMZ

2pcs NEC-TRCB-M68-STD4.) I/O Board Set for 32E1 with SMB connectors Part No.:NEC-IOBSET-N48-64M-SMB (Refer to item 1.5 & 2.2)

Includes: 1pc NEC-IOB-64M-SMB2pcs NEC-TRCB-M68-STD

5.) I/O Board Set for 32E1 with DSUB connectors Part No.:NEC-IOBSET-N48-64M-DSUB (Refer to item 1.9 & 2.2)Includes: 1pc NEC-IOB-96M-DSUB

2pcs NEC-TRCB-M68-STD6.) I/O Board Set for 32E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-64M-RJ45 (Refer to item 1.11 & 2.2)

Includes: 1pc NEC-IOB-64M-RJ452pcs NEC-TRCB-M68-STD

7.) I/O Board Set for 24E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-48M-RJ45 (Refer to item 1.12&2.2&2.5)Includes: 1pc NEC-IOB-48M-RJ45

1pc NEC-TRCB-M68-STD1pc NEC-TRCB-M68/2-STD

PASOLINK NEO – PDH 32E1 INTERFACE

Page 15: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)3. I/O BOARD SETS

Page 13

3.4

1.) I/O Board Set for 16E1 with BNC connectors Part No.:NEC-IOBSET-N48-32M-BNC (Refer to item 1.1 & 2.2)

Includes: 1pc NEC-IOB-32M-BNC

1pc NEC-TRCB-M68-STD

2.) I/O Board Set for 16E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-N48-32M-1656 (Refer to item 1.2 & 2.2)

Includes: 1pc NEC-IOB-32M-1656

1pc NEC-TRCB-M68-STD

3.) I/O Board Set for 16E1 with SMZ connectors Part No.:NEC-IOBSET-N48-32M-SMZ (Refer to item 1.3 & 2.2)

Includes: 1pc NEC-IOB-32M-SMZ

1pc NEC-TRCB-M68-STD

4.) I/O Board Set for 16E1 with SMB connectors Part No.:NEC-IOBSET-N48-32M-SMB (Refer to item 1.6 & 2.2)

Includes: 1pc NEC-IOB-32M-SMB

1pc NEC-TRCB-M68-STD

5.) I/O Board Set for 16E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-32M-RJ45 (Refer to item 1.13 & 2.2)

Includes: 1pc NEC-IOB-32M-RJ45

1pc NEC-TRCB-M68-STD

PASOLINK NEO – PDH 32E1 INTERFACE, UPTO 16E1 CAPACITY

3.5

1.) I/O Board Set for 40E1 with SMB connectors Part No.:NEC-IOBSET-80M-SMB (Refer to item 1.16 & 2.2 & 2.3)

Includes: 1pc NEC-IOB-80M-SMB

2pcs NEC-TRCB-M68-STD

1pc NEC-TRCB-M36-SCRW

2.) I/O Board Set for 40E1 with 1.0/2.3 connectors Part No.:NEC-IOBSET-80M-1023 (Refer to item1.17 & 2.2 & 2.3)

Includes: 1pc NEC-IOB-80M-1023

2pcs NEC-TRCB-M68-STD

1pc NEC-TRCB-M36-SCRW

3.) I/O Board Set for 40E1 with DSUB connectors Part No.:NEC-IOBSET-80M-DSUB (Refer to item 1.18 & 2.2 & 2.4)

Includes: 1pc NEC-IOB-80M-DSUB

2pcs NEC-TRCB-M68-STD

1pc NEC-TRCB-M36-STMP

4.) I/O Board Set for 40E1 with RJ45 connectors Part No.:NEC-IOBSET-80M-RJ45 (Refer to item 1.19 & 2.2 & 2.3)

Includes: 1pc NEC-IOB-80M-RJ45

2pcs NEC-TRCB-M68-STD

1pc NEC-TRCB-M36-SCRW

PASOLINK MX – PDH 40E1 (32E1 INTERFACE + 8E1 INTERFACE)

3.6

1.) I/O Board Set for 4E1 with BNC connectors Part No.:NEC-IOBSET-8M-BNC (Refer to item 1.14 & 2.1)

Includes: 1pc NEC-IOB-8M-BNC

1pc NEC-TRCB-D37-SCRW

2.) I/O Board Set for 4E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-8M-1656 (Refer to item 1.15 & 2.1)

Includes: 1pc NEC-IOB-8M-1656

1pc NEC-TRCB-D37-SCRW

PASOLINK NEO – 4E1 (4PORT LAN INTERFACE)

3.7 OTHER I/O BOARD SETS ARE AVAILABLE PLEASE CONTACT NEC EUROPE LTD

Page 16: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

A. Indoor Accessories (GP series)

Page 14

D-SUB 1 D-SUB 2 D-SUB 3 D-SUB 4 D-SUB 5 D-SUB 6 DSUB37 socket

CH1-8 CH9-16 CH17-24 CH25-32 CH33-40 CH41-48 pin:+ 1

- 2

+ 3- 4

+ 6

- 7+ 8

- 9

+ 11- 12

+ 13

- 14+ 16

- 17

+ 18

- 19+ 20

- 21

+ 22- 23

+ 25

- 26+ 27

- 28

+ 29- 30

+ 31

- 32

+ 34- 35

+ 36

- 375

CH44

CH43

CH42

CH41

CH48

CH47

CH46

CH45

CH44

CH43

CH42

CH41

CH48

CH47

CH46

CH45

CH33

CH37

CH36

CH35

CH34

CH33

CH40

CH39

CH38

CH27

CH26

CH25

CH40

CH39

CH38

CH37

CH36

CH35

CH34

CH31

CH30

CH29

CH28

CH17

CH32

CH31

CH30

CH29

CH28

CH27

CH26

CH25

CH32

CH17

CH24

CH23

CH22

CH21

CH24

IN

IN

IN

IN

IN

IN

CH20

CH19

CH18

OUT

CH13

CH12

IN

CH23

CH22

CH21

CH20

CH19

CH18

PASOLINK

Traffic

Channels

CH8

OUT

OUT

OUT

OUT

OUT

IN

OUT

OUT

CH16

CH7 CH15

CH14CH6

CH5

CH4

CH3

CH2

CH1

CH8

CH7

CH6

CH9

CH16

CH15

CH14

CH13

CH12

CH11

CH10

CH5

ground

CH1 CH9

CH3 CH11

CH2 CH10

CH4

4.1

PIN LAYOUT OF DSUB37 SOCKET CONNECTORS ON MDR-DSUB CABLES

4.2

Cable Types • MDR68-2xDSUB37 interconnection

cables (STD, SCRW, STMP types)

• MDR68-DSUB37 interconnection

cable (STD type)

• MDR36-DSUB37 interconnection

cables (SCRW,STMP types)

Specification • Pin layout is equal to PASOLINK

DSUB37 traffic connectors

(PASOLINK V4, PASOLINK

NEO-16E1 INTFC, etc.)

Specification • an RJ45 connector corresponds

to an E1 channel IN and OUT

I/O Boards with RJ45 connectors

NEC-IOB-96M-RJ45

NEC-IOB-64M-RJ45

NEC-IOB-48M-RJ45

NEC-IOB-32M-RJ45

NEC-IOB-80M-RJ45

PIN LAYOUT OF RJ45 SOCKET CONNECTORS ON RJ45 I/O BOARDS

pin:

+ 1

- 2

+ 4

- 5

RJ45

OUT

IN

CH

4. PIN LAYOUT

Page 17: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)1. OMT (ORTHO MODE TRANSDUCER)

Page 15

1.3

OMT FOR 11-38GHZ (GENERALLY)

1.1

1.2

Ortho Mode Transducer for Andrew, Grante or RFS antenna

for frequency range of 11, 13, 15, 18, 23, 26, 28, 32, 38GHz.

In case of orders, the antenna type always has to be specified.

• Interface at ODU side: 2xNEC flange

• Interface at Antenna side: interface for dual polarized Andrew(A), Grante(G) or RFS(R)

• Content of the ordering code:

OMT-”frequency band”-2NEC-”Antenna manufacturer”

• Example code: OMT-180-2NEC-R

OMT FOR 11-38GH2 PART NO.: OMT-110…380-2NEC-A(G)(R)

ORTHO MODE TRANSDUCERS

Figure

Page 18: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs

Page 16

2.2

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or 10dB)

Single Band Hybrid for Frequency Range of 6-L GHz (5.925-6.425GHz)

• Interfaces at ODU side: 2xN male

• Coupling rate: 3, 6 or 10dB

• Interface at antenna side: PDR70, UDR70, PBR70, UBR70 or other customer request

• Material of the Waveguide flange: (A) - Aluminium or (B) Brass

• Content of the ordering code:

ISH-59-2N-"coupling rate"-"waveguide flange"- "material of the WG flange"

• Example code: ISH-59-2N-3-UDR70-B

ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-59-2N-3(6)(10)-P(U)D(B)R70-A(B)

2.3

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or 10dB)

Single Band Hybrid for Frequency Range of 6-U GHz (6.425-7.125GHz)

• Interfaces at ODU side: 2xN male

• Coupling rate: 3, 6 or 10dB

• Interface at antenna side: PDR70, UDR70, PBR70, UBR70 or other customer request

• Material of the Waveguide flange: Aluminium (A) or Brass (B)

• Content of the ordering code:

ISH-64-2N-"coupling rate"-"waveguide flange"-"material of the WG flange"

• Example code: ISH-64-2N-3-UDR70-B

ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-64-2N-3(6)(10)-P(U)D(B)R70-A(B)

2.1

HYBRIDS FOR 2 ODUs

Page 19: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs

Page 17

2.6

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6

or 10dB) Dual Band Hybrid for Frequency Range of 7-8 GHz

(7.125-8.5GHz)

• Interfaces at ODU side: 2xN male

• Coupling rate: 3, 6 or 10dB

• Interface at antenna side: PDR84, UDR84, PBR84, UBR84

or other customer request

• Material of the Waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

ISH-71-85-2N-"coupling rate"-"waveguide flange"-"material

of the WG flange"

• Example code: ISH-71-85-2N-10-UDR84-B

ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-71-85-2N-3(6)(10)-P(U)D(B)R84-A(B)

2.5

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6

or 10dB) Single Band Hybrid for Frequency Range of

7 GHz (7.125-7.750GHz)

• Interfaces at ODU side: 2xN male

• Coupling rate: 3, 6 or 10dB

• Interface at antenna side: PDR84, UDR84, PBR84, UBR84 or other cus-

tomer request

• Material of the Waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

ISH-71-2N-"coupling rate"-"waveguide flange"-"material of the WG flange"

• Example code: ISH-71-2N-3-UDR84-A

ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-71-2N-3(6)(10)-P(U)D(B)R84-A(B)

2.4

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical

(6 or 10dB) Dual Band Hybrid for Frequency Range of

6-W GHz (5.925-7.125GHz)

• Interfaces at ODU side: 2xN male

• Coupling rate: 3, 6 or 10dB

• Interface at antenna side: PDR70, UDR70, PBR70, UBR70 or

other customer request

• Material of the Waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

ISH-59-71-2N-"coupling rate"-"waveguide flange"-"material of

the WG flange"

• Example code: ISH-59-71-2N-3-UDR70-B

ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-59-71-2N-3(6)(10)-P(U)D(B)R70-A(B)

2.7

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6

or 10dB) Single Band Hybrid for Frequency Range of

8 GHz (7.750-8.5GHz)

• Interfaces at ODU side: 2xN male

• Coupling rate: 3, 6 or 10dB

• Interface at antenna side: PDR84, UDR84, PBR84, UBR84

or other customer request

• Material of the Waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

ISH-77-2N-"coupling rate"-"waveguide flange"-"material of the WG flange"

• Example code: ISH-77-2N-3-UDR84-A

ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-77-2N-3(6)(10)-P(U)D(B)R84-A(B)

Page 20: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs

Page 18

2.10

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6

or 10dB) Dual Band Hybrid for Frequency Range of

18-23 GHz (17.7-23.6GHz)

• Interfaces at ODU and antenna side: NEC flange

• Coupling rate: 3, 6 or 10dB

• Content of the ordering code:

ISH-180-230-2NEC-"coupling rate"

• Example code: ISH-180-230-2NEC-3

ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-180-230-2NEC-3(6)(10)

2.9

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6

or 10dB) Dual Band Hybrid for Frequency Range

of 13-15 GHz (12.75-15.35GHz)

• Interfaces at ODU and antenna side: NEC flange

• Coupling rate: 3, 6 or 10dB

• Content of the ordering code:

ISH-130-150-2NEC-"coupling rate"

• Example code: ISH-130-150-2NEC-3

ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-130-150-2NEC-3(6)(10)

2.8

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6

or 10dB) Single Band Hybrid for Frequency Range of

11, 13, 15, 18, 23, 26, 28, 32, 38 GHz

• Interfaces at ODU and antenna side: NEC flange

• Coupling rate: 3, 6 or 10dB

• Content of the ordering code:

ISH-"frequency band"-2NEC-"coupling rate"

• Example code: ISH-110-2NEC-3

ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-110…380-2NEC-3(6)(10)

2.11

Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6

or 10dB) Single Band Hybrid for Frequency Range of

32-28 GHz (31.8-39.5GHz)

• Interfaces at ODU and antenna side: NEC flange

• Coupling rate: 3, 6 or 10dB

• Content of the ordering code:

ISH-320-380-2NEC-"coupling rate"

• Example code: ISH-320-380-2NEC-3

ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-320-380-2NEC-3(6)(10)

Page 21: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs

Page 19

2.14

Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Dual Band Hybrid for Frequency Range of 18-23GHz (17.7-23.6GHz)

• Interface at ODU side: 2xNEC flange

• Interface at antenna side: PDR220, UDR220, PBR220 or UBR220

or other customer request

• Material of the waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

SSH-180-230-2NEC-"coupling rate"- "WG flange type"-"material

of the WG flange"

• Example code: SSH-180-230-2NEC-3-PDR220-A

SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-180-230-2NEC-3(6)(10)-P(U)D(B)R220-A(B)

2.13

Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Dual Band Hybrid for Frequency Range of 13-15GHz (12.75-15.35GHz)

• Interface at ODU side: 2xNEC flange

• Interface at antenna side: PDR140, UDR140, PBR140 or UBR140 or

other customer request

• Material of the waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

SSH-130-150-2NEC-"coupling rate"- "WG flange type"-"material

of the WG flange"

• Example code: SSH-130-150-2NEC-3-PDR140-A

SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-130-150-2NEC-3(6)(10)-P(U)D(B)R140-A(B)

2.12

Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Single Band Hybrid for Frequency Range of 11, 13, 15, 18, 23, 26, 28, 32 and 38GHz

• Interface at ODU side: 2xNEC flange

• Interface at antenna side:

- 11GHz: PDR100, UDR100, PBR100 or UBR100 or other customer request

- 11 and 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request

- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request

- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request

- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request

- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request

• Material of the waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

SSH-"frequency band"-2NEC-"coupling rate"- "WG flange type"- material of the WG flange"

• Example code: SSH-110-2NEC-3-PDR100-A

SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-110...380-2NEC-3(6)(10)-P(U)D(B)R100…320-A(B)

2.15

Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Dual Band Hybrid for Frequency Range of 32-38GHz (31.8-39.5GHz)

• Interface at ODU side: 2xNEC flange

• Interface at antenna side: PDR320, UDR320, PBR320 or UBR320

or other customer request

• Material of the waveguide flange: Aluminium(A) or Brass(B)

• Content of the ordering code:

SSH-320-380-2NEC-"coupling rate"- "WG flange type"-"material

of the WG flange"

• Example code: SSH-320-380-2NEC-3-PDR320-A

SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-320-380-2NEC-3(6)(10)-P(U)D(B)R320-A(B)

Page 22: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs

Page 20

2.16

ISH/SSH 6-38 GHZ HYBRIDS FOR 2 ODUs – 3DB COUPLING RATE

2.17

ISH/SSH 6-38 GHZ HYBRIDS FOR 2 ODUs – 6DB COUPLING RATE

Page 23: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs

Page 21

2.18

ISH/SSH 6-38 GHZ HYBRIDS FOR 2 ODUs – 3DB COUPLING RATE

Page 24: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)3. HYBRID FOR 4 ODUs (SINGLE POLARIZATION)

Page 22

3.1

SINGLE POLARIZED HYBRIDS FOR 4 ODUs

SH–4ODU consist of three hybrids

SH–4ODU consist of three hybrids

2?(1+1) System

Hot Standby Operation

(double capacity, very high availability

(4+0) System

Simultaneous Operation

(four-fold capacity)

(3+1) System

Hot Standby Operation

(triple capacity, increased availability)

3.2

Integrated Single Polarized Symmetrical (6dB) Single Band Hybrid for Frequency Range of 13, 15, 18, 23, 26, 28, 32, 38 GHz

• Interfaces at ODU and antenna side: NEC flange• Coupling rate: 6dB (25%), any other coupling rate is available upon

customer request• Content of the ordering code:

ISH-"frequency band"-4NEC-6• Example code: ISH-130-4NEC-6

ISH 13-38 GHZ HYBRIDS FOR 4 ODUs PART NO.: ISH-130…380-4NEC-6

Page 25: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)3. HYBRID FOR 4 ODUs (SINGLE POLARIZATION)

Page 23

3.3

Separated Single Polarized Symmetrical (6dB) Single Band Hybridfor Frequency Range of 13, 15, 18, 23, 26, 28, 32, 38 GHz

• Interfaces at ODU side: 4xNEC flange• Interface at antenna side:

- 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request

• Material of the waveguide flange: Aluminium(A) or Brass(B)• Coupling rate: 6dB (25%), any other coupling rate is available upon customer request• Content of the ordering code:

SSH-"frequency band"-4NEC-6-"WG flange type"-"material of the WG flange"• Example code: SSH-130-4NEC-6-PDR140-B6

SSH 13-38 GHZ HYBRIDS FOR 4 ODUs PART NO.: SSH-130…380-4NEC-6-P(U)D(B)R120…320-A(B)

3.4

ISH/SSH 13-38 GHZ HYBRIDS FOR 4 ODUs – 6DB COUPLING RATE

Page 26: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)4. HYBRIDS FOR 4 ODUs (DUAL POLARISATION)

Page 24

4.2

4.1

Integrated Dual Polarized Symmetrical (3dB) or Asymmetrical (6 or 10dB)Single Band Hybrid for Frequency Range of 13,18, 38 GHz

• Interfaces at ODU side: NEC flange

• Interfaces at antenna side: interface for dual polarized Andrew(A), Grante(G) or RFS(R)

• Coupling rate: 3, 6 or 10dB at Vertical and Horizontal polarization

• Content of the ordering code:

IDH-"frequency band"-4NEC-"coupling rate for vertical pol. "-"coupling rate for

horizontal pol."-"Antenna manufacturer"

• Example code: IDH-130-4NEC-V6-H3-G

IDH 13, 18 AND 38 GHZ DUAL POLARIZED HYBRIDS FOR 4 ODUs PART NO.: IDH-130/180/380-4NEC-V3(6)(10)-H3(6)(10)-A(G)(R)

DUAL POLARIZED HYBRIDS FOR 4 ODUs

DH–4ODU consist of

one OMT (for polarization separation), and

two hybrids (for equipolar decoupling) 2 x (2+0) Dual Polarized System 2 x (1+1) Dual Polarized System

Page 27: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)4. HYBRIDS FOR 4 ODUs (DUAL POLARISATION)

Page 25

4.3

IDH 13, 18 AND 38 GHZ DUAL POLARIZED HYBRIDS FOR 4 ODUs

Page 28: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)5. MOUNTING BRACKET

Page 26

5.2

Mounting brackets (Separate Interface) for NEC ODU with interfaceadapter for the frequency range of 11, 13-15, 18-23, 26, 28, 32-38GHz

• Interface at ODU side: NEC flange• Interface at antenna side:

- 11GHz:PDR100, UDR100, PBR100 or UBR100 or other customer request- 11 and 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request

• Material of the waveguide flange: Aluminium(A) or Brass(B)• Content of the ordering code:

SI-"frequency band"-NEC-"WG flange type"-"material of the WG flange"• Example code: SI-110-NEC-PDR120-B, SI-130-150-NEC-PDR140-A

MOUNTING BRACKETS WITH INTERFACE ADAPTER FOR 11-38GHZ ODU

5.1

Mounting bracket (Separate Interface) for NEC ODU (Pasolink V4, NEO) without interface adapter for the frequency range of 6/7/8 GHz

MOUNTING BRACKET WITHOUT INTERFACE ADAPTER FOR 6/7/8GHZ ODU PART NO.: SI-6/7/8-NEC-W/O

Page 29: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)6. WAVEGUIDE-N TRANSDUCER

Page 27

6.1

Waveguide to N transducer for frequency range of 6/7/8 GHz

• Waveguide type: PDR 70, UDR70, PBR70, UBR70, PDR84, UDR84, PBR84, UBR84 or customer request

• Material of the Waveguide flange: (A)- aluminium or (B)-Brass• N connector: female • Content of the ordering code: "Waveguide type"-N-"Material of the WG flange"• Example code: PDR70-N-B, UDR84-N-A, ….

WG-N TRANSDUCER PART NO.: WG FLANGE-N-A(B)

6.2

WAVEGUIDE-N TRANSDUCER

Page 30: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

B. RF Accessories (IS Series)7. LOW LOSS CABLES

Page 28

7.2

LOW LOSS CABLES

7.1

Part No.: LCC-50-NS(M)NS(M)-1.0Coaxial Cable with 2pcs Straight N-male Connectors; 1m

Part No.: LCC-50-NS(M)NS(M)-1.2Coaxial Cable with 2pcs Straight N-male Connectors; 1.2m

Part No.: LCC-50-NS(M)NR(M)-1.0Coaxial Cable with Staright N-male and Right Angle N-male Connector; 1m

Part No.: LCC-50-NS(M)NR(M)-1.2Coaxial Cable with Staright N-male and Right Angle N-male Connector; 1.2m

Part No.:LCC-50-NR(M)NR(M)-1.0Coaxial Cable with 2pcs Right Angle N-male Connectors; 1m

Part No.: LCC-50-NR(M)NR(M)-1.2Coaxial Cable with 2pcs Right Angle N-male Connectors

LOW LOSS CABLES

Page 31: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

C. MEASURING TOOLS (IS SERIES)1. MEASURING TOOLS

Page 29

1.1

Interconnection cable set for two ODUs, Frequency Range of 6, 7, 8, 11, 13, 15, 18, 23, 26, 38 GHz (In case of 6/7/8GHz the ODU should has N connector)

• Attenuators - 20 dB with N(SMA)(K)* connectors - 2pcs• Waveguide adapter rings - 2pcs• Waveguide-SMA(K)* converters - 2 pcs, in case of 11-38GHz• N(SMA)(K) – N(SMA)(K)* cable - 1pc• IDU - ODU IF cables with connectors - 2pcs• Screws - 12pcs, in case of 11-38GHz • Content of the ordering code:

- NEC-ICBSET-”frequency range”-LAB-Bundle• Example code: NEC-ICBSET-38G-LAB-Bundle

* N connector is used for 6/7/8GHz (if the ODU has N connector), SMA for 11-26GHz, K for 28-38GHz

INTERCONNECTION RADIOFREQUENCY PART NO.: NEC-ICBSET-59…380-LAB-BUNDLE CABLE SET FOR 2 ODUS

1.3

Measurement frame for XPIC system is developed to testNEC PASOLINK XPIC System

• Frequency range: 13/18/38GHz

• Type of system: Dual polarized Measurement System

• Type of Waveguide: Rectangular

• Total Attenuation: 100 or 120 dB

• Number of interface for NEC ODUs : 4

• Type of connectors: SMA (female) or K (female)

• To check the frequencies of the ODUs there are four pieces SMA (10-26GHz) or

K (28-40GHz) connectors, which should be terminated if they are not used.

MEASURING FRAME FOR XPIC SYSTEM FOR 13(18)(38)GHZ PART NO.: MEASURING FRAME FOR XPIC

1.2

Direct mounted measuring frame for frequency range of 11, 13, 15, 18, 23, 26, 38 GHz, is developed for simulation of point to point microwave links

• The system can be used for the simulation of hot standby system(1+1). In this case two

direct mounted type hybrid should be installed to the place of the ODUs.

• For adjusting the attenuation of the microwave path the curves of the Variable Attenuator

should be used (between 80 and 120dB).

• To check the frequencies of the ODUs there are two pieces SMA (10-26GHz) or

K (28-40GHz) connectors, which should be terminated if they are not used.

Main part of the system:

- Variable Attenuator (attenuation*: 40 dB) 1pc

- Fix Attenuator (maximum attenuation*: 40 dB) 2pcs

- Single polarized Hybrid (3dB) (SH…-2NEC-3) 2pcs

- SMA (10–26 GHz) or K (28–40 GHz) connector 2pcs

- Radio Interfaces for NEC ODU 4pcs

- Low Power Termination (N male / SMA male / K male) 2pcs

• MS-Frequency band-fix attenuation* variable attenuation* -2 SMA or K connector 2 NEC

* Other attenuation values are available upon request

DIRECT MOUNTED MEASURING FRAME (11-38GHZ) PART NO.: MS-110…380-80F-40V-2SMA(K)-2NEC

Page 32: Indoor Accessories RF Accessories Measuring · PDF filePASOLINK NEO – 16E1 DSUB 37 pin connector PASOLINK NEO – 32E1 MDR 68 pin connector CONNECTOR GUIDE IDU – I/O Board connection

How to Contact Us

Scientis Solutions Ltd.Innovation Centre, 49 Oxford Street, Leicester LE1 5 XY, EnglandEmail: [email protected]

Registered in England: 6851268, VAT Registration: GB 973723101

Copyright 2010 by Scientis Solutions Ltd. All rights reserved and Information is subject to change without notice.