Indice

Prefazione e ringraziamenti 29

Sessioni Plenarie

Conferenze generali

M. Gurtin - lunedì 14, 9.50-10.35The formulation of gradient theories for single-crystal plasticity at small lengthscales: size effects 32

G. Stepan - giovedì 17, 11.00-11.45Balancing and vision - or The dynamics of poise 33

Conferenze tematiche

G. Pedrizzetti, martedì, 9.00-9.40Cardiac Fluid Mechanics: from theory to clinical applications 34

G. Del Piero, mercoledì, 9.00-9.40The Variational Approach to Fracture and to Other Inelastic Phenomena 36

Conferenze tematiche industriali

A. Mencarini, martedì, 12.00-12.35Innovation process in Household Appliances segment: Issues and Opportunities 38

G. Rivetti, mercoledì, 12.00-12.35

(icstione e progetti della filiera nautica 39

Sessioni parallele

Meccanica generaleGE-01 lunedì 14, 16.30-18.30/:'. DKìialk'onardo, A. Genoese, S. Melzihll'ccl of trainset composition on thè running safety of heavy freight trains 42

P. Filianoti, V. FiammaExtreme sea wave forces on detached breakwaters 82S. Corvaro, C. Lorenzoni, M. Postacchini, E. Seta, L. Soldini, M. Brocchini, A. MancinelliConfronto sperimentale sulla dissipazione delle onde di mare su fondali a diversaconfigurazione 84

FL-03 (Tecniche di simulazione numerica) - mercoledì 16, 10.00-12.00F.M. DenaroSul riconoscimento delle funzioni di filtro implicitamente definite da schemi aiVolumi Finiti per la LES 86G. De StefanoTowards fully-adaptive wavelet transform-based numerical simulation of turbulence 88A. Di Marco, R. Camussi, T. PagliaroliHydrogen Combustion in a Doublé Cavity Trapped Vortex Combustor 90F.M. Denaro, A. Aprovitola, G. RiccardiAn analysis of thè errors in Finite Volume numerical simulations 92M. Bernardini, S. PirozzoliZonal detached eddy simulation of compressible base flows 94

FL-04 (Vorticità e aerodinamica) - mercoledì 16, 16.10-17.10G. V. lungo, G. BurestiExperimental investigation on thè influence of wind direction on thè aerodynamicloads actingonlow aspect-ratio triangular prisms 96C.M. Marongiu, R. TognacciniAerodynamic force analysis in high Reynolds number flows by Lamb vector integration 98G. Coppola, F. de Rosa, L. de LucaMultimodal analysis for thè stability of vortices with axial flow 100

FL-05 (Turbolenza) - giovedì 17, 9.00-11.00R. Camussi, M. C. Jacob, J. Grilliat, G. Caputi GennaroFlow structures and pressure fluctuations in a tip-leakage flow 102P. Guai fieri, F. Picano, G. Sordina, C.M. Case io laThe effeets of back-reaction on particle clustering and turbulence modulationin shear flows 104L. Chiapponi, S. LongoStrong turbulence and free surface interaction in a grid-stirred tank 106E. DeAngelis, C.M. Coscio laDNS of entrainment through turbulent/non-turbulent interface in dilute polymer Solutions ..108C. de Nicola, G. Graziosi, R. DonellìPrediction of transition on wings in a RANS approach 110

FL-06 (Metodi numerici non-convenzionali) - giovedì 17, 12.00-14.00S. Rosa Taddei, F. Larocca, F. BertiniA treatment of thè leading edge discontinuity for time-marching throughflow analyses 112L. Galantucci, M. Quadrio, P. LuchiniSuperfluid vortices in a wall-bounded flow 114M. Cremonesi, A. Frangi, U. PeregoFluid-structure interaction solved by a Lagrangian finite element method 116

S. Marrone, M. Antuono, A. Colagrossi, G. GrazianiEnhanced Boundary Treatment in 2D Smoothing Particle Hydrodynamics Models 118A. Crivellini, L. Pelagalli, F. BassiAn Implicit Matrix-Free Discontinuous Galerkin Solver for Turbulent Flows 121M. Chinappi, E. De AngelisEffect of confinement on statistical properties of a DNA chain in microchannels 124

Meccanica delle macchine ;

MA-01 (Vibrazioni) - lunedì 14, 10.55-12.55G. IncertiSulla possibilità di ridurre le vibrazioni residue di dispositivi meccanici azionati datrasmissioni a cinghia 126F. Sorge, M. CammalleriHysteretic whirl stabilization in rotor-shaft-bearing systems on dry friction suspension 128A. Cammarata, D. Condorelli, R. SinatraA Simplified Finite Element-based Algorithm to Study Vibrations of Parallel KinematicMachines 130F. PellicanoDynamics of Circular Cylindrical Shells under Seismic Loads 132L. Mangialardi, L. SoriaA mixed analytical-multibody-BEM approach for predicting thè sound power levelof ahydraulic impacthammer 134R. Caracciolo, D. Richiedei, A.Trevisani, G. ZanardoStructural modification of vibrating systems: an approach based on a constrainedinverse eigenvalue problem 136

MA-02 (Meccanismi) - lunedì 14, 14.10-16.10R. Di GregorioKinetostatic Analysis of Sphere-Roller Contacts: aReview 138E. Gìannotti, C. GallettiSynthesis of single-loop kinematotropic mechanisms 139G. Baronio, M. TiboniAn originai solution for a multiple transmission System based on cranks mechanism 141G. Figliolini, P. Rea, M. ConteDesign Flow-Chart of Slider-Crank Mechanisms and Application 143C. Galletti, E. GiannottiAssur's-groups-based simulation for teaching kinematics of planar linkages 145

MA-03 (Veicoli) - lunedì 14, 16.30-18.30M.-C. Palpacela, L. CarbonariAnalysis of handling and vertical dynamics of a 4 steering wheels electric vehiclepoweredby 2 in-wheel motors 147F. Bottiglione, G. MantriotaTank vehicles: testing and modeling 149V. Cossalter, R. Lot, M. Massaro, R. SartoriDevelopment and Testing of Assistant Rider Systems with thè UNIPD MotorcycleRiding Simulator 151

10

N. D'Alfio, E. Galvagno, A. Morgando, A. ViglianiSteer-by-Wire System design and test through Hardware in thè Loop simulation 153A. Rindi, L. Pugì, M. Ignesti, J. AucielloSimulation of freight trains dynamics during braking manoeuvres on curved tracks 155

MA-04 (Biomeccanica) - martedì 15, 10.00-12.00A. Borboni, D. Fausti, R. FagliaProgetto, realizzazione e prove preliminari su un sistema automatico per lariabilitazione del gomito 157M. Ometto, G. LegnaniInstrumentation of aHandbike for biomechanical measurements 159L. Mattei, B. Piccigallo, K. Stadler, E. Ciulli, F. Di PuccioEHL modeling of hip implants based on a ball-on-plane configuration 161R. Corninoti, N. Sancisi, V. Parenti-CastelliOptimal Four-Bar Linkage for thè Stability and thè Naturai Motion of thè Human Knee 163M. Fontana, M. Bergamasco, F. SalsedoMechanical design and Experimental Characterization of a novel Hand Exoskeleton 165M. Cavacece, E. Pennestrì, P.P. ValentiniComparison of two different seat-spine transfer functions for vibrational comfortmonitoring of carpassengers 167

MA-05a (Azionamenti e attuatori) - martedì 15, 13.50-15.50P. Boscariol, A. Gasparetto, M. Giovagnoni, A. Lanzutti, R. Vidoni, V. ZanottoInnovative Contrai Techniques for Mechatronic Systems 169P. Toni, L. Pugi, M. Malvezzi, F. BartoliniModel of Parallel-Connected Multiple Induction Motors for HIL simulation ofrailway anti-skid-anti-slip systems 171M. Pasquino, D. CancellaraProgettazione di due attuatori meccanici per la simulazione degli effetti sismicisu strutture esistenti e di nuova costruzione 173H. Giberti, S. Cinquemanì, G. LegnaniEffetti delle caratteristiche meccaniche della trasmissione sulla scelta del motoriduttore 175R. Bussola, A. Menegolo, M. Tiboni, A dell'i CarriPianificazione ed ottimizzazione della legge di moto di attuatori elettrici mediantealgoritmi genetici 177P. Righettìni, R. Strada, V. LorenziProgetto di un banco prova per l'analisi del comportamento dinamico di servomotorielettrici 179

MA-05b (Azionamenti e attuatori) - martedì 15, 16.10-17.10P. Righettini, B. Zappa, R. Strada, M. ForlaniImpiego di attuatori piezoelettrici in trasmissioni a cinghia per lo sviluppo di sistemi diposizionamento ad alta precisione 181F. Braghin, S. Cinquemani, F. Resta, D. SabatoDynamic Characterization of a Magnetostrictive Actuator 183L. Bruzzone, G. BozziniFractional order position contrai of SCARA robots 185

11

MA-06a (Componenti) - mercoledì 16, 10.00-12.00M. Borasso, C. Braccesi, F. Cianetti, M. C. ValigiA mechanical face seal model and numerical simulation of stick-slip 187A. Bracci, M. Gabiccini, M. GuiggianiRobust Optimization of Hypoid Gears with Misalignments 189M. Silvestri, E. Prati, A. TasoraExperimental Study on High Pressure Shaft Seal Applications 191F. Bottiglione, G. Carbone, L. Mangìalardi, G. MantriotaMechanism of Leakage in Fiat Seals 193G. Figliolini, H. Stachel, J. AngelesOn thè Synthesis of Spatial Cycloidal Gears 195M. Cocconcelli, R.RubiniCorrelation between thè stator current signal and thè kinematic model of thè rollinghearing for thè diagnostics 197

MA-06b (Componenti) - mercoledì 16, 13.50-15.50B. Allotta, L. Pugi, F. BartoliniDesign and Simulation of Magneto-Rheological Dampers for railway applications 199G. Carbone, L. De Novellis, L. MangialardiAn enhanced CMM model to predict CVT performances: theory vs. experiment 201E. Ciulli, B. Piccigallo, D. VelaExperimental wear study of engine cam-followers 203M. Scoraggi, G. Carbone, L. MangialardiEHL-Squeeze in Highly Loaded Contacts: The Influence of Fluid Rheology onPin-Pulley Interaction in CVT Transmission 205H. Giberti, A. Collina, A. Zuin, M. BoccioloneSulla determinazione del rendimento delle trasmissioni meccaniche a vitea ricircolo di sfere 207

MA-07 (Dinamica) - mercoledì 16, 16.10-17.10A. Lucifredi, P. Silvestri, L. Polotti, F. StrobinoRealizzazione di un modello di convogliatore a nastro mediante i programmi disimulazione LMS Virtual Lab e AMESim e cosimulazione per il controllo delgruppo motore dell'impianto 209S. Chatterton, A. Vania, P. PennacchiRotor Balancing by means of High Breakdown Point and Bounded-Influence RobustEstimators 211A. Lucifredi, P. Silvestri, P. Sgroi, D. NocetiAnalisi dinamica preliminare, teorica e sperimentale, del carrello principale di un velivolo .213

MA-08a (Robotica) - giovedì 17, 9.00-11.00M. Gabiccini, A. Bracci, D. De Carli, M. Fredianelli, A. BiechiExplicit Lagrangian Formulation of thè Dynamic Regressors for Serial Manipulators 215G. Carbone, M. CeccarelliProblematiche e soluzioni per lo sviluppo di una mano robotica di basso costo 217A. Vertuan, S. Ruggeri, G. LegnaniKinetostatic and dynamic properties of "Cheope" a parallel-serial manipulator 219

12

H. Giberti, S. Chatterton, S. CinquemaniOttimizzazione cinematica di un manipolatore parallelo 5R 2-GDL azionatoda cilindri pneumatici 221G. Bozzini, L. Bruzzone, R. Oderio, G. Quaglia, R. RazzoliDesign of thè small mobile robot Epi.q-2 223G. Boschetti, R. CaraccioloWorkspace computation in parallel manipulators with three translational degrees offreedom 225

MA-08b (Robotica) - giovedì 17, 12.00-14.00M. Callegari, G. Palmieri, M.-C. PalpaceliiCartesian space visual contrai of a translating parallel manipulator 227G. Legnani, P. Magnani, M. TiboniAn innovative approach for thè Calibration of Industriai Manipulators basedon Neural Networks 229M. Foglia, A. Gentile, G. Reina3D-Odometry for Rough-Terrain Mobile Robots 231M. Malvezzi, F. Bartolini, B. Allotta, P. ToniDynamics Simulation of a Six-Legged Mobile Robot 233M. Gabiccini, A. Biechi, A. Lo Biondo, G. MancusoTrajectory Tracking and Force-Closure Contrai of a Multifingered Handwith Rolling Contact 235S. Ruggeri, A. Vertuan, G. Legnani, A. VisioliKinetostatic calibration of a SCARA robot 236

Meccanica dei solidi

SO-01 (Interfacce) - lunedì 14, 10.55-12.55A. Barbieri, A. CecchiFinite thickness interface model for un-strengthened and strengthened bedjoint of masonry walls in piane loaded 238G.P. Lignola, A. Collina, A. Prota, G. ManfrediAnalysis of tile-substrate behavior subjected to shrinkage 240A. Spada, G. Fileccia Scimemi, G. GiambancoThe interphase model applied to simulate chemically bonded anchors 242U. Perego, A. GiampieriAn interface element to model thè mechanical response of crease linesfor carton-based packaging 244A.-L. Bessoud, F. Krasucki, M. SerpilliShell-like inclusions with high rigidity: an asymptotic approach 246M. Paggi, G. ZavariseContact mechanics of functionally graded rough surfaces 248

SO-02 (Problemi accoppiati e multifase) - lunedì 14, 14.10-16.10G. Xotta, V. Salomoni, C. Majorana, G. MazzuccoMeso-scale modelling of concrete as a fully coupled porous material 250F. Pesavento, B.A. Schrefler, D. GawinA multiscale/multiphysics model for concrete 252

13

L. La Ragione, V. MagnanimoAn irreversible behavior for a dense granular material 253C. CollariA computationally oriented approach to thermodynamics of multiphase porous media 255R. Serpieri, L. RosatiA linearized biphasic poroelastic model and its calibration with experimental measures 257L. Sanavia, L. Luison, R.N. Nanhornguè, M. Passarotto, R. Santagiuliana, B.A. SchreflerMultiphysics modelling of environmental engineering problems by means of porousmedia mechanics 259

SO-03a (Plasticità e danno) - martedì 15, 10.00-12.00A. Zirpoli, R. Fedele, N. ValorosoMode-I parameter identification for an interface model describing damagein adhesive joints 261P. Taranto, E. Papa, A. Taliercio, G. NapoliA non locai anisotropic damage model for brittle materials 263S. Lenci, Q. Piattoni, F. Clementi, T SadowskiA mechanical characterization of unfired dry earth: ultimate strength, damageand fracture parameters 265L. Contrafatto, M. CuomoA variational formulation in damaging plasticity for modelling Strong Discontinuities 267F. De Angelis, R.L. TaylorNonlinear kinematic hardening modeling in plasticity 269

SO-03b (Plasticità e danno) - martedì 15, 13.50-15.50D. De Tommasi, S. Marzano, G.Puglisi, G. ZurloDamage andhealing effects in inflated rubber balloons 271G. Garcea, L. LeonettiOn thè effectiveness of numerical algorithms for thè evaluation of thè shakedownand limit loads 273A. Cavicchi, R. MassabòDynamic interaction of multiple delaminations and core damage in compositesandwich beams 274A. Piccolroaz, D. BigoniNon-smooth yield criteria 276B. Pomaro, V.A. Salomoni, F. Gramegna, G. Prete, C.E. MajoranaRadiation damage in thè target area shielding of a facility for Selective ProductionofExoticSpecies(SPES) Project 278M. Cuomo, M. FagoneA numerical scheme for finite deformation anisotropic elastoplasticity withevolving material directions 281

SO-03c (Plasticità e danno) - mercoledì 16, 10.00-12.00A. Grimaldi, R. Luciano, Z. RinaldiTensile strength of concrete reinforced by a random distribution of fiber 283M. Merlin, R. RizzoniModeling thè constrained recovery in shapememory wires 285

14

L. Galuppi, L. DeseriSintering during constrained forging and isostatic pressing: thè influenceof thè interstitial stress 287E. Bovet, B. Chiaia, L. PreziosiNumerical analysis of snow avalanche mechanics and interaction with structures 289G. Perrella, L. Esposito, A. Cutolo, M. FraldiA Proposai of Unified Elastic Moduli-Matrix Volume Fraction Law for Porous RVEs 291C. Comi, U. PeregoA two-phase model for chemo-damage induced anisotropy in concrete 293

SO-04 (Solido di de St Venant) - martedì 15, 16.10-17.10D. Veber, A. TaliercioTorsion of elastic anisotropic micropolar cylindrical bars 295F. Marotti de Sciarra, R. Barretta, A. BarrettaNonlocal shear stresses in Saint Venant beams 297G. Barone, A. Pirrotta, R. SantoroComplex analysis for thè solution of torsion problems: a comparison among threemethods 299

SO-05 (Modelli per gomma e materiali polimerici) - mercoledì 16, 16.10-17.10S. Briccoli Baii, M. Fagone, G. RanocchiaiThe elastic behavior of a rubber-like material for composite glass 301J. Ciambella, A. Paolone, S. VidoliA non-linear viscoelastic model for filled-rubber: analytical formulation,experimental modeling and identification 303G. Palmieri, G. Chiappini, M. Sasso, D. AmodioPseudo-elastic characterization of elastomeric materials by cyclic multi-axialloading tests 305

SO-06a (Elasticità) - giovedì 17, 9.00-11.00M. Paggi, Al. Carpinteri, R. OrlaA unified mathematical formulation for thè asymptotic analysis of singular elasticand electromagnetic fields 307M. Di Paola, A. Pirrotta, M. ZingalesWaves propagation in a fractional viscoelastic continuum 309A. Russo, A. TartaglioneOn thè Contact Problem of Linear Elasticity 311M. Brun, S. Guenneau, A.B. MovchanInvisibility to in-plane elastic waves 313Al. Carpinteri, P. Cornetti, A. Sapora, M. Di Paola, M. ZingalesAn explicit mechanical interpretation of Eringen non-local elasticity by meansof fractional calculus 315F. Greco, P. Lonetti, P. Nevone BlasiMacroscopic analysis of heterogeneous solids including thè effects of finite changes inconstitutive and geometrie microstructural properties 317

SO-06b (Elasticità) - giovedì 17, 12.00-14.00G. Caramia, D. De Tommasi, S. Marzano, G. SaccomandiSmall amplitude waves in history-type viscoelastic bodies 319

15

A. Russo, A. TartaglioneSome properties of thè solutions of thè equations of linear elastodynamicsin unbounded domains 321R. SburlatiAn analytic solution method for a biharmonic elastic problem 323D. Capecchi, G. Ruta, P. TrovalusciPoincaré's energetic approach to continuum mechanics 325C.E. Majorana, G.A. Khoury, V.A. SalomoniEffects of polypropylene fibres in concrete under fire conditions 327M. PaciaroniComportamento a grandi deformazioni di alcuni materiali iperelastici 329

SO-07 (Frattura) - giovedì 17, 12.00-14.00S. Bennati, P.S. ValvoAn elastic interface model for mixed-mode fracture of adhesive joints 331B. Chiaia, B. FrigoMultiscale Fracture Behaviour of Ice 333A. Salvadorì, A. CariniCeradini's approach in fracture mechanics 335F. Barpi, S. ValenteFluid driven cohesive crack propagation in quasi-brittle materials 337D. Ferretti, M. Rossi, G. Royer-Carfagni, M. SilvestriAn ESPI investigation of thè crack-tip opening profile in brittle glass 339

SO-08 (Omogeneizzazione) - giovedì 17, 12.00-14.00E. Artioli, P. Bisegna, F. Caselli, F. MaceriEffective longitudinal shear moduli of random composites comprisingfùnctionally-graded fibres 341D. Bruno, R. Carpino, F. Greco, G. SgambitterraEfficacy of homogenization techniques for locally periodic composites 343M. C. Pernice, L. Nunziante, M. FraldiA direct evaluation of thè Fabric Tensor in anisotropic porous media 345A. Caporale, R. LucianoSerie di Fourier in sistemi di coordinate per l'omogeneizzazione dei compositiviscoelastici 347D.P. Boso, M. LefikNumerical modelling of non linear composites using artificial neural networks 349

Meccanica delle strutture

ST-01 (Membrane, piastre) - lunedì 14, 10.55-12.55G. Castellazzi, P. KryslAssumed Strain Finite Elements for Reissner-Mindlin Plates 351A. Capsoni, P. LadevèzeOnboundary conditions for Ladevèze's piate theory 353S. Vidoli, C. Maurini, A. FernandesMultiparametric actuation of bistable plates 355

16

E. PuntelLumped Strain Method for thin plates: a numerical appraisal 357R. Bar sotti, S.S. LigaròMembrane elastiche pressurizzate 359M. Cuomo, L. GrecoInfluence of wrinkling in thè structural response of light membranes 361

ST-02a (Elementi finiti, elementi di contorno) - lunedì 14, 10.55-12.55V. Maliardo, F.M.H. AliabadiNoise contrai by BEM in large scale engineering problems 362A. Marinetti, G. OlivetoOn thè Evaluation of thè Shear Correction Factors: a Boundary Element Approach 364A. Sofi, A.A. Pisano, P. FuschiNonhomogeneous nonlocal elasticity: a finite element approach 366S. de Miranda, A. Madeo, G. Garcea, Fr. LibertiniImplicit Corotational Method: analysis of slender panels assemblages 368A. Temponi, A. Salvadori, F. Mordenti, A. Carini, P. PelizzariOn thè approximation of 3D hyperbolic boundary integrai equations 370T. Panzeca, A. La Mantia, M. Salerno, S. TerravecchiaModellazione lineare delle grandezze di contorno nell'analisi per sottostrutturedelle piastre inflesse via SBEM 372

ST-02b (Elementi finiti, elementi di contorno) - lunedì 14, 14.10-16.10T. Panzeca, F. Cucco, E. Parlavecchio, L. ZitoLa formulazione simmetrica alla Galerkin del BEM in elastoplasticità 374G. Garcea, A. Madeo, G. ZagariImplicit Corotational Method: FEM implementation 376P. Torto lini, M. Petrangeli, E. SpaconeUn elemento di trave 2D per la modellazione dell'interazione N-M-V 378F. Parrinello, B. FatilaRigid-damaging-frictional constitutive model for delamination analysis of joinedbodies via XFEM with tip-element 381M. Mazza, M. AristodemoConstruction and performances of a symmetric boundary element model for thinplates based on a complex variable integration 383A. Bilotta, E. TurcoSolution of thè Cauchy problem in elasticity via hybrid FEM 385

ST-02c (Elementi finiti, elementi di contorno) - lunedì 14, 16.30-18.30M. Di Paola, G. Failla, G. Inzerillo, M. ZingalesNon-local finite element method for thè analysis of elastic continuum withlong-range centrai interactions 387E. Correrà, M. Petrolo, G. Giunta, S. BelouettarHigher order beam finite elements with only displacement degrees of freedom 389S. Lopez, G. La SalaStatical and dynamical structural analysis by a kinematical description of thèsmall strains involving finite displacements 391E. Monconi, B.R. MaceWave propagation in axisymmetric structures from finite element analysis 393

17

M. Cuomo, L. GrecoA finite element cable for thè analysis of cable nets 395

ST-03 (Identificazione, controllo, ottimizzazione) - lunedì 14, 16.30-18.30S. Benfratello, F. Giambanco, L. PalizzoloOptimal design of structure under dynamic loading 396L. Marcheggiani, S. Lenci, R. ChaconOn thè dynamics and contrai of complex phenomena in parametrically drivenchains ofpendulums 398M. Bruggi, C. CinquiniOn an alternative approach to pressure loads problems in topology optimization 400G. Fileccia Scimemi, S. RizzoMulti-Objective Parameters Identification via ACOR algorithm 402A. Pau, F. VestroniDamage characterization in a bar using guided waves 404G. Catania, S. SorrentinoIdentification of non-conventional viscoelastic models for polymeric vibrating structures ...406

ST-04 (Analisi elasto-plastica, analisi limite, casi reali) - martedì 15, 10.00-12.00O. Barrerà, A.R.S. Ponter, A.C.F. CocksApplication of thè Linear Matching Method to materials that exhibit softening 408F. Marmo, L. RosatiExtension of thè fiber-free approach to complex stress-strain models for concrete 410M. Fraldi, A. Gesualdo, L. NunzianteBounds for plastic multipliers in combined loadings: applications to solids and structures ...412G. Bolzon, T. Garbowski, G. Maier, G. NovatiParameter calibration strategies for elastic-plastic models of thin foils 414VA. Salomoni, C.E. Majorana, G.M. Giannuzzi, A. MiliozziStructural Design of Parabolic-Trough Solar Concentrators 416A. BacciConsiderazioni sul progetto di strutture in acciaio soggette ad un'esplosione subacquea 418

ST-05 (Continui monodimensionali) - martedì 15, 13.50-15.50G. Failla, A. Santini, M. ZingalesA Wavelet-Galerkin Method for a 1D Elastic Continuum with Long- Range Interactions ....419G. Failla, N. ImpolloniaClosed-form Solutions for Euler-Bernoulli Non-uniform and Discontinuous Beamsvia Generalized Functions 421Al. Carpinteri, G. LacidognaA global analysis of tali buildings subjected to horizontal loads 423D. GenoveseA Generalized Method for thè Static Analysis of a Monodimensional PrestressedContinuum 425N. Impollonia, G. Ricciardi, F. SaittaOn thè Deformed Shape of an Elastic Cable under General Load Conditions 427L. Bartolini, L. Marchionni, L. VitaliStrength and DeformationCapacity ofCorrodedPipes 429

18

ST-06a (FRP) - martedì 15, 13.50-15.50G. Milani, E. Milani, A. TrailiHomogenized Upper Bound FÉ limit analysis model for FRP-reinforced masonry vaults ....431L. Ascione, VP. Berardì, A. D'AponteAn experimental and numerical investigation on thè viscous behavior of FRP materials 433G. Giambanco, T. Turetta, A. CottoneNumerical analysis of thè mechanical response of wood glulam beams reinforcedthrough thè thickness by FRP rods 435R. CapozuccaAssessment of re beams strengthened with NSM CFRP rods by static and dynamic tests 437F. Ascione, V. Gerenza, L. FeoA numerical and experimental investigation on thè shear forces distributionamong thè bolts of GFRP bolted joints 439A. Baratta, I. CorbiDesign strategies for FRP reinforcement of no-tension structures 441

ST-06b (FRP) - martedì 15, 16.10-17.10L. Ascione, VP. Berardi, A. D AponteTime-depending behavior of PC beams externally plated with prestressed FRPlaminates: a mechanical model 443A. Acciai, R. NudoModalità di crisi di elementi in calcestruzzo armati con barre in FRP 445G. Mazzucco, V. Salomoni, C. Majorana, C. PellegrinoThree-dimensional modelling of bond behaviour between concrete and FRPreinforcement 447

ST-07a (Instabilità e collasso) - mercoledì 16, 10.00-12.00G. Ferraro, G. OlivetoOn thè stability of elastomeric bearings and isolation systems 449M. Pignataro, N.L. Rizzi, G.C. Ruta, V. VaranoBucklingof thin-walled frames 451N.M. AucielloSulla stabilià e vibrazioni di travi caricate con "follower force"; II BoundaryCharacteristic Orthogonal Polynomial method (BCOPs) 453R. Battaglia, A. Traili, A. CazzaniA Finite Element multifield model for criticai loads of composite laminated plates 455E. Ruocco, V. Minutalo, S. CiaramellaAn analytical model for elastic stability of full 2-D plates 457M. Paggi, Al. CarpinteriA theoretical and numerical approach to thè interaction between buckling andresonance instabilities in discrete and continuous mechanical systems 459

ST-07b (Instabilità e collasso) - mercoledì 16, 13.50-15.50E. Masoero, F.K. Wittel, B.M. Chiaia, H.J. HerrmannParametric study of thè progressive collapse of 2D framed structures 461An. Carpinteri, R. Brighenti, S. VantadoriEffect of mechanical and thermo-mechanical treatments on fatigue behaviourof V-shapednotched round bars 463

19

C. FlorisStochastic Stability of Elastic and Viscoelastic Columns 465U. Alìbrandi, N. Impollonia, G. RicciardiPost-Buckling Analysis of Systems with Uncertain Parameters 467P. Fotì, A. Fraddoso, S. Marzano, M.D. PiccioniAnnular shear driven instability for an incompressible elastic tube 469/. Ano, M. NakazawaDynamic post-buckling analysis of thè microfolding Augusti 3D model withlocai symmetry-breakings 471

ST-08a (Dinamica strutturale: modelli) - mercoledì 16, 13.50-15.50M. Lepidi, A. LuongoMulti-parameter perturbation methods for thè eigensolution sensitivity in discretesystems exhibiting multiple frequency veering 473G. Rega, E. SaettaVibrazioni nonlineari della piastra laminata in risonanza esterna ed interna:formulazione ed analisi di un modello con curvature nonlineari 475D. Bruno, P. Lonetti, A. MannaDynamic phenomena of interfacial cracks in laminated structures 477A. Luongo, F. D'AnnibaleLinear stability analysis of multiparameter dynamical systems via anumerical-perturbation approach 479M. Breccolotti, Fi. Libertini, I. VenanzìNaturai frequencies of prestressed concrete beams: theoretical prediction andnumerical validation 481Al. Carpinteri, N. Pugno, A. SaporaDynamic analysis of fractal antennas 483

ST-08b (Dinamica strutturale: modelli) - mercoledì 16,16.10-17.10A.Feriani, M.G. MulasIterative Solution Methods for Coupled Vehicle-Structure Systems 485A. Luongo, G. PiccardoAnalisi perturbativa e numerica di un cavo sospeso percorso da carichi viaggianti 487A. Bacci, S. Bennati, S. PeveriDynamic interaction among passive protection structures and blast shock waves 489

ST-09a (Murature) - mercoledì 16, 13.50-15.50A. Bacigalupo, L. GambarottaMicro-polar and second-order homogenization of periodic masonry 491S. Marfia, E. SaccoMicro-macro analysis of periodic masonry walls 493E. Bernardini, N. Cavatagli, F. Cluni, V. GusellaMasonry strength domain by homogenization in generalized piane state 495D. Addessi, V. Ciompi, M.L. De Bellis, A. PaoloneAnalisi multi-scala dei pannelli in muratura basata su formulazioni agli elementifiniti miste 497A. Badala, M. Cuomo, G. D'AgataAnalisi limite di volte a botte rinforzate conCFRP 499

20

R. Barsotti, S. Bennati, A. DamiA simple structural model for a masonry arch-wall System subjected to dead vertical loads .500

ST-09b (Murature) - giovedì 17, 9.00-11.00M. GirardiAnalytical and numerical methods for thè dynamic analysis of slender masonry structures ..502N. Cavatagli, F. Cluni, V. GusellaAn interface micro-mechanical approach for thè masonry mechanisms analysis 504A. Cecchi, C. Cennamo, B. ChiaiaDal modello continuo ai macro-elementi: le implicazioni dell'effetto scala sulle murature...506D. Addessi, A. Paolone, E. SaccoA nonlinear Cosserat-Cauchy homogenization procedure for regular masonry based ontransformation field analysis 509D. Aita, R. Barsotti, S. BennatiLoad-bearing capacity of circular, pointed and elliptical masonry arches 511

ST-lOa (Dinamica non lineare) - giovedì 17, 9.00-11.00G. LancioniPropagation of detached bubbles in a semi-infinite beam laid on a unilateral elasticsupport 513C.E.N. Mazzilli, C.T. SanchesNon-linear normal modes of a fixed-moored offshore catenary riser 515P. Casini, F. VestroniNonlinear modal analysis of 2-DOF piecewise linear mechanical systems 517C. Tripepi, F. Nucera, A. Vakakis, L. Bergman, M. McFarlandSeismic protection of full scale seismically excited steel structures throughTargeted Energy Transfers 519A. Baratta, O. CorbiOn thè Dynamics of Rigid Block Motion Under Strong Shaking 521L. Ruzziconi, S. LenciNonlinear phenomena in thè dynamics of a cable-supported beam 523

ST-lOb (Dinamicanon lineare)-giovedì 17, 12.00-14.00A. Luongo, D. ZulliBifurcation and stability of a two d.o.f. system under simultaneous parametric,external and self-excitation 525A. BocciA simple model for dynamic analysis of "Hesco bastions" subjected to vehicular impacts...527S. Bufera, G. Cottone, M. Di PaolaFractional calculus for to thè solution of non-linear stochastic oscillators withviscous dumper devices 528D. Bernardini, G. RegaEvaluation of thè influence of thè thermomechanical parameters on thè chaoticdynamics of shape memory oscillators 530E. Pavlovskaia, J. Ing, S. Banerjee, M. WiercigrochStrange dynamics of bilinear oscillator dose to grazing 532A. Arena, W. LacarbonaraStatic and aeroelastic limit states of "Ponte della Musica" via a fully nonlinearcontinuum model 534

21

ST-lla (Compositi, laminati, FGM) - giovedì 17, 9.00-11.00M. Cuomo, G. di VentiMethods of analysis of laminated glass 536A. Pisano, P. FuschiCollapse load evaluation of pinned-joint composite plates 537L. Bardella, D. Tonelli, M. MinelliHow to choose an analytical model for thè stress state of sandwich beams under bending....539P.S. ValvoA beam-theory based method for partitioning fracture modes in delaminated beams 541B. Allotta, S. Falomi, A. Schneider, P. MoltaStructural Analysis of Sails including Composite Material Model 543P. Trovalusci, V. Varano, G. Rega, A. MurraliElastic waves in a microcracked bar: thè constitutively coupled case 545

ST-llb (Compositi, laminati, FGM) - giovedì 17, 12.00-14.00S. Benfratello, A. CameraExperimental analysis of flexural behaviour of glued lamellar wood by speckleinterferometry 547Al. Carpinteri, S. Invernizzi, G. LacidognaScaling of fracture and Acoustic Emission in thè compression of concrete-like materials 549L. Contrafatto, G.T. Di VentiAnalysis of laminated glass beams using thè Strong Discontmuities Approach 551S. Brischetto, E. Correrà, M. CinefraRefined and mixed models for free vibration analysis of functionally gradedmaterial plates andshells 553Al. Carpinteri, M. CorradoDimensionai analysis of over-reinforced concrete beams in bending 555

Sessioni speciali

"Metodi dinamici di indagine sperimentale "A. Morassi (Udine)-F. Benedettini (L'Aquila) __dedicata a Maria Nilde Cerri

DIN-01 - lunedì 14,14.10-16.10A.L. Materazzi, I. Vertami (Keynote Lecture)Structural damage detection using dynamic response: state-of-the-art and prospects 559R. Alaggio, G. RegaUnfolding of complex dynamics of sagged cables around a divergence-Hopfbifurcation: theoretical model and experimental results 561G. Failla, A. Santini, M. Pappafico, A. FrancomanoWavelet-based Estimation of Fully Non-stationary Spectra and Applications toSeismic Engineering 563

22

P. Cocciola, N. Maugeri, G. MuscolinoStructural Identification via time-domain sensitivity analysis 565S. Caddemi, 1. Caliò, M. MarlettaThe dynamic non-linear behaviour of beams with closing cracks 567

DIN-02 - lunedì 14, 16.30-18.30S. Caddemi, I. Caliò, S. LiseniA procedure for thè identification of concentrated damages on beams byfree vibration tests 569D. Spina, C. Valente, S. GabrieleNon classical modal parameters identification via dynamic response complexification 571L. Faravellì, S. Casciati, C. FugginiFull-scale experimental dynamic tests using GPS sensors 573D. Zulli, R. Alaggio, F. BenedettiniFrequency-avoiding in arch bridges: a possible structural health monitoring approach 575A. Reggio, M. De Angelis, S. PernoControllo della risposta dinamica di strutture dotate di TMD ad elevato rapportodi massa: analisi numeriche e sperimentali 577A. SalvatoriIn situ vibration monitoring of "Minerva Medica" temple in Rome 579

DIN-03 - martedì 15, 10.00-12.00D. Cancellar a, A. de Majo, M. ModanoProve sperimentali in situ per la caratterizzazione dinamica di una struttura e relativasottostruttura con controllo sismico passivo 581A. Greco, A. PauThe dynamic stiffhess method for detection of concentrated damages in elastic frames 583F. Eusani, F. BenedettiniModal and Structural Identification of a Masonry Chimney 585C. GentileRadar-based measurement of deflections on bridges and large structures 587F. Resta, G. Tomasini, D. SabatoSperimentazione di sistemi smorzanti a liquido TLCD per strutture civili 589C. Rainierì, G. Fabbrocino, F. Santucci de MagistrisOperational Modal Analysis for identification of geotechnical systems 591

DIN-04 - martedì 15, 13.50-15.50N.D. Oliveto, G. Scalia, G. OlivetoTime Domain Identification of Hybrid Base Isolation Systems using Free Vibration Tests ..593V. Sepe, G. Bellizzotti, M. DiaferioIdentification of locai damage in beams and frames 595A. MorassiDynamical inverse problems and damage detection in steel-concrete composite beams 597F. Tubino, G. PiccardoVibrazioni indotte dal passo umano sui ponti pedonali: modelli numerici e osservazionisperimentali 599P.M. Calvi, P. VenìniToward a novel approach for damage identification and health monitoring of bridgestructures 601

23

C. Surace, K. Worden, R. Barthorpe, G. DemarieA Comparative Study of Approaches to Damage Detection 603

DIN-05 - martedì 15, 16.10-17.10S. Gabriele, C. Valente, F. BrancaleoniModel Calibration by Interval Analysis 605L. Carassale, F. PercivaleIncertezze dei parametri modali stimati mediante metodi output-only nel dominiodella frequenza 607A.L. Materazzi, Fi. Libertini, M. BreccolottiHandling state variable constraints and actuator saturation in structural contrai strategies....6O9

"Biomeccanica e biomateriali "L. Deseri (Trento) __ ,

BIO-01 -mercoledì 16, 10.00-12.00R.M. McMeeking (Keynote Lecture)The mechanics of thè cytoskeleton and celi adhesions 611S. FedericoPorous Fibre-Reinforced Materials Under Large Deformations 612F. Stefanoni, M. Ventre, M. Diez, VA. Schulte, M.C. Lensen, F. Mollica, P.A. NettiA Numerical Model for Durotaxis 614L. Cardamone, J.D. HumphreyOrigin of Residuai Stress in Arteries 616L.R. ZastrowModelling sarcomere dynamics 618N. Sancisi, V. Parenti-CastelliA sequentially-defined kinetostatic model of thè knee with higher pairs 620

BIO-02 (Macro) - mercoledì 16, 13.50-15.50P. Nardinocchi, T. Svaton, L. TeresiModelling active elastic tissues: thè left ventricle contractions 622M. Buonsanti, F. Filianoti, A. PontariEffects on a spherical aneurysm produced by locai change in thè blood flow-dynamics 624P. Vena, G. Pennati, D. Gastaldi, R. ControA membrane anisotropic model for remodeling of tissues with particular regardsto cerebral aneurysm formation and growth 625G. Bianciardi, M. Buonsanti, A. Pontari, S. TripodiFractal analysis and biophysical investigation of muscular tissue damaged dueto low temperature 627P. Nardinocchi, L. Teresi, V. VaranoI diagrammi pressione-volume e la contrazione cardiaca 629A. Boccaccio, C. PappalettereA mechano-regulation model to investigate how thè latency period in amandibular distraction osteogenesis changes for differently aged patients 631

24

BIO-03 (Sperimentale) - mercoledì 16, 16.10-17.10R. Adamini, A. Borboni, D. Fausti, R. Faglia, M. Mor, P. PoesioBanco prova per valvole cardiache: descrizione e risultati preliminari 633C. Colombo, F. Casolo, L. Vergani, D. BonaciniExperimental and Numerical Study for thè Optimization of a Carbon Fibre Prosthesis 635C. Rottenbacher, D. Zaccaria, M. Gualea, G. Mimmi, G. Bonandrini, E. BuzziA study on thè biomechanical efficiency of different cycling positions 637

BIO-04 (Nano-micro) - giovedì 17, 9.00-11.00L. Lunghi, M.E. Ferretti, C. Biondi, L. DeseriCyclic adenosine monophosphate pathway and human trophoblast cells: is apredictive mechanical model needed? 639A. Ferrara, A. PandolfìStructured material models for soft biological tissues 641A. DiCarloMyofibrils: a biochemistry-based coarse model 643C.C.C. Capone, V. Panzetta, M.C. Pernice, P.A. Netti, M. FraldiDynamic characterization and remodelling of interfaces with microstructure 645A. CavicchiDetection of thè stiffness of thè microenvironment and its spatial variationsin tissue cells: a mechanical model 648

"Meccanica di materiali e sistemi alle micro e nano scale"C. Comi (Milano Leonardo) — L. Deseri (Trento)

MIC-01 - lunedì 14, 10.55-12.55A. De Simone (Keynote Lecture)Electro-mechanical coupling in nematic elastomers: statics and dynamics 650G. deBotton, M. Gei, A. LewinsteinModelling dielectric composites in finite deformation elasticity 652E. Radi, P.M. MarianoPropagazione di fratture e dislocazioni in quasicristalli bidimensionali 654T. Roubicek, G. TomassettiA model for shape-memory alloys accounting for electric conduction 656R. Ardito, C. ComiThermoelastic damping in layered micromechanical resonators 658

MIC-02 - lunedì 14, 14.10-16.10N.M. Pugno, S.N. GorbSolving thè Multiple Peeling and Discovering a New Angle for thè OptimalNanoadhesion of Insects, Spiders and Geckos 660M. Chinappi, C.M. CasciolaSlip phenomenon in water flow on hydrophobic surfaces 662A. Frezzotti, M. CaminiEffects of Non-local Scattering on thè Aerodynamic Coefficients of Nanosized Particles ....664F. Fraternali, T. Blesgen, A. Amendola, A. Misra, C. Dar aioOn thè Mechanical Behavior of Multilayered Carbon Nanotube Foams 666

25

F. Ascione, G. MancusiFRP adhesive lap-joints: a micro-scale mechanical approach 668L. BardellaThe influence of thè dissipation due to thè plastic spin on thè size effectsdescribable by means of isotropie strain gradient plasticity 670

MIC-03 - lunedì 14, 16.30-18.30E. Lepore, N. PugnoExperimental analysis on thè adhesion of living tokay geckos on nanorough surfaces 672V. Guidi, L. Lanzoni, A. MazzolariOn thè deformation field of bent crystals for channeling experiments 674G. Formica, W. LacarbonaraEshelby continuum modeling of CNT-reinforced composites in free vibratìons 676A. Corigliano, A. Ghisi, G. Langfelder, A. Longoni, F. ZaragaPolysilicon MEMS fatigue and fracture characterization via on chip testing 678P. Rìcci, C. Paternoster, A. Fabrizi, R. Cecchini, S. Spigarelli, P. V. Kiryukhantsev-Korneev,M. HaidopouloUse of nano-indentation for nano-mechanical characterisation of coatings 680F. DaviSingularities in Landau-Devonshire potentials for Ferroelectrics Phase-Transitions 682

"Innovazione e ricerca come sostegno alla competitivita industriale " \M. Callegari (Ancona) - P. Seremellini (SOMIpress) \

INN-01 -martedì 15, 10.00-12.00S. Zitti, R. Zannini, N. Wàlli, E.U. SchmitzOttimizzazione del processo di tornitura su centri CNC a cinematica parallela:effetti della lubrificazione, tipologia d'inserto e geometria del particolaresull'usura utensile e finitura superficiale di componenti in acciaio 684G. Magnaninì, L. Ghergo, A. Arteconi, C.M. Bartolini, F. PolonaraImpianto di liquefazione del metano per autotrazione 687N. Mancini, A. BrovettiCaso della innovazione del processo produttivo di un componente utilizzatonell'industria automobilistica 689C. Paternoster, P. Serenellini, S. Spigarelli, R. Cecchini, A. FabriziApplicazioni di Ingegnerìa delle Superfici al settore mobile/elettrodomestico 690G. Capriotti, S. Papalini, G. CauteruccioStudio numerico dello stampaggio di una vasca in plastica per lavabiancheriacon presenza di inserti metallici 691G. Romani, S. Piccinini, F. Rispoli, A. CorsiniElica anti-intasamento per miscelatori sommergibili 693

INN-02 - martedì 15, 13.50-15.50M. Mancini, E. ManciniAnalisi delle problematiche relative alle deformazioni dei particolari meccanici costruitiin acciaio 18NiCrMo5 sottoposti a trattamento termochimico di carbocementazione 694M. Cavallari, G. D'Elia, S. Delvecchio, M. Malaga, E. Mucchi, G. DalpiazOn thè use of vibration signal analysis for industriai quality contrai 696

26

S. Albertini, A. Borboni, M. Cotti Cottini, D. Fausti, R. Faglia, D. PomiProcesso d'innovazione e risultati in un caso nel settore della riabilitazione automatizzata ..698G. Audisio, F. Cheli, M. VelardocchiaCyber Tyre for Vehicle Active Safety 700G. De Camillis, L. Vitaletti, M. CastelloThe numerical method approach on thè domestic ventilation systems design 703G. Catalucci, S. Papalini, A. ErbettaVerifica a fatica di carrelli aeronautici 705

INN-03 - martedì 15, 16.10-17.10L. Consolini, S. Lenci, G. BarnabeìA glass and stainless steel truss 707U. Galvanetto, M. Ghajari, L. lannucciFull body simulations of motorcyclist accidents 709F. Freddi, G. Royer-Carfagni, M. SilvestriThe post-breakage response of laminated glass with thè Gecko® technology 711

"Modelli variazionali di frattura "M. Angelillo (Salerno)

FRA-01 -mercoledì 16, 10.00-12.00G. DalMaso, G. Lazzaroni (Keynote Lecture)A variational model for quasistatic crack growth in finite elasticity withnon-interpenetration 713F. Freddi, G. Royer-CarfagniA Variational Model for Cleavage and Shear Fracture 715A. Fortunato, M. LippielloNumerical studies on crack initiation at contact surface based on discontinuousfinite elements with gaps and mesh minimization 717G. Gargiulo, E. ZappaleSome sufficient conditions for lower semicontinuity in SBD 719A. PandolfiVariational cohesive fracture models and 3D crack tracking 721

FRA-02-mercoledì 16, 13.50-15.50J.-J. Marigo (Keynote Lecture)From initiation of cracks to fatigue: some fundamentals contribution of thèvariational approach to fracture 722F. Fratemali, B. Schmìdt, M. OrtizOn an Eigendeformation Approach to Brittle Fracture 724M. Bruggi, P. VeniniA truly-mixed method for cohesive crack propagation in quasi—brittle materials 726C. Comi, S. Mariani, M. Negri, U. PeregoStep-by-step variational cohesive propagation in one dimension 728M. Angelillo, E. BabilioComparing numerical solutions for thè propagation of brittle fractures based onlocai energy minimization with classical fracture mechanics results 730

27

"Controllo di flussi"R. Domili (CIRA)-P. Luchini (Salerno)

FLU-01 - lunedì 14, 10.55-12.55M. Martinez, L. Vesely, C. Haigermoser, M. Onorato (Keynote Lecture)Cavity Flow Contrai by High Frequency Forcing 732J.O. Pralits, F. Giannetti, P. LuchiniA global stability analysis of a thin-airfoil wake 734J. V. Krier, T. SuciptoHighly Optimisable Laminar Flow Contrai Devices for Swept Wings 736F. Giannetti, P. Luchini, L. MarinoThree-dimensional linear stability analysis of lid-driven cavity flow 738R.S. Donelli, E. luliano, D. de RosaSuction optimization on thick airfoil to trap vortices 740G. luso, L. AcernoSynthetic jets on wing for aerodynamic loads redistribution 742

• "L'approccio analitico alla dinamica bidimensionale della vorticità. E'soltanto un fatto obsoleto?"G. Riccardi (Napoli II)

VOR-01 - lunedì 14, 16.30-18.30C. Marchioro (Keynote Lecture)Incompressible fluids in two dimensions: some results and open problems 744G. Riccardi, D. DuranteAnanalytical contour dynamics 746G. Pedrizzetti, M. VukicevicVortex formatura and growth behind an orifice 748/. Gned, L. ZannettiPatch of Vorticity inMotion 750

Indice degli autori 751

28