Indiana Metal Craft Ornament 09

INDIANA METAL CRAFTASI 62570

PPAI 112175UPIC IMC

SAGE 51745

2009

INDIANA METAL CRAFT

IMC ORNAMENTSValid Through June 2010

2

Ornaments on this page shown at actual size

For quantities less than 100, see inset page 3

2009 Dated Stock Pewter Ornaments

OR209B

OR209A

OR209A Reverse Side

OR209MINA

OR209MINBASI 62570PPAI 112175UPIC IMCSAGE 51745

Fine Pewter Stock Ornaments...a continuation of 20 years of annual dated ornaments.Available with a reverse side imprint or with a blank back suitable for engraving.

TOOling, MOlD, anD arT ChargeThere are NO TOOLING, MOLD, OR ART CHARGES for reverse side imprint of stock ornaments. If you wish to use a signature, send a normal size signature in black ink.

DeliveryImprinted: 10 working days. When requested, 5 days with no rush charges.Add 5 days for color enhancement as shown.Non-imprinted: Same day service!

PaCkagingStandard: Red holiday envelope. Optional packaging: Page 20.

PriCing (a)Full Size imprinted

100 250 500 1000OR209AI 12.80 9.90 8.50 7.50OR209BI 12.80 9.90 8.50 7.50SnowflakeOR209CI 11.00 8.50 7.50 7.00ColorPrint OrnamentOR209SI 14.50 11.40 9.80 8.60

Mini Size imprinted 100 250 500 1000

OR209MINAI 9.90 7.80 6.90 6.00 OR209MINBI 9.90 7.80 6.90 6.00

Full Size non imprinted12 50 100 250

OR209AB 10.00 8.00 7.50 7.00OR209BB 10.00 8.00 7.50 7.00ColorPrint OrnamentOR209SB 11.50 9.50 9.00 8.50

Mini Size non imprinted12 50 100 250

OR209MINAB 6.50 5.50 5.20 4.90OR209MINBB 6.50 5.50 5.20 4.90

Prices include silver tinsel cord. For optional red satin ribbon, add $0.30(c).

Optional Color EnhancementOR209B and OR209MINB available

with color enhancement as shown.

add $1.70(c)add $2.20(c)

Red Item — Mini Size

Green Item Numbers — Full Size

2010 dated stock ornament designs available 1/2010. Contact factory or see web site.

OR209C

OR209S

Our snowflake ornament is laser

imprinted on a 0.95” pewter tone metal plate.

Laser Imprint for Less than MinimumFor customers requiring fewer than 100 pieces, we offer laser imprint inserts (our imprinted pewter ornaments listed on page 2 have a cast-in imprint) down to a 10 piece minimum. No tooling/set-up charges, and these ornaments also include tinsel cord and red envelope.Production time: 2-5 working day

PriCing (a)Full Size laser imprint

10 25 50 75OR209ALI 16.00 14.50 13.80 13.40OR209BLI 16.00 14.50 13.80 13.40SnowflakeOR209CLI 16.00 14.50 13.80 13.40ColorPrint OrnamentOR209SLI 17.50 16.00 15.30 14.90

Mini Size laser imprint 10 25 50 75

OR209MINALI 14.00 12.50 11.80 11.40 OR209MINBLI 14.00 12.50 11.80 11.40

OR209MINALI

OR209MINBLI

OR209ALI

OR209CLI

OR209BLIOR209SLI

3ASI 62570

PPAI 112175UPIC IMC

SAGE 51745

ASI 62570PPAI 112175UPIC IMCSAGE 51745

4

Undated Stock Pewter Ornaments

OR2STK3 - Actual Size

OR2STK11 / OR2STK11T

OR2STK14

OR2STK11T Back DesignOR2STK11 Imprinted

Full size ornaments are 2.25” diameter or equivalent. Mini size ornaments are 1.875” diameter or equivalent.

OR2MIN3

OR2MIN4 - Actual Size

OR2MIN14

Our stock fine pewter holiday ornaments are available with a reverse side imprint or with a blank back suitable for engraving.

TOOling, MOlD, anD arT ChargeThere are NO TOOLING, MOLD, OR ART CHARGES for reverse side imprint of stock ornaments.

DeliveryImprinted: 10 working days. When requested, 5 days with no rush charges.Add 5 days for color enhancement as shown.Non-imprinted: Same day service!



100 250 500 1000OR2STKI 12.80 9.90 8.50 7.50OR2STK14I 11.00 8.50 7.50 7.00

Mini Size imprinted100 250 500 1000

OR2MINI 9.90 7.80 6.90 6.00


OR2STKB 10.00 8.00 7.50 7.00


OR2MINB 6.50 5.50 5.20 4.90


*OR2STK14 is laser imprinted on a

pewter tone metal plate.

OR2STK11T is a fully tooled back not available with imprint.

Red Item Numbers - Mini SizeGreen Item Numbers - Full Size

*

*

*For quantities less than 100, see page 10

OR2STK6

OR2MIN5

OR2MIN8OR2STK8 OR2MIN9

OR2STK9

OR2MIN13OR2STK13

OR2MIN12OR2STK12

OR2MIN15

OR2MIN16OR2STK16

Optional Color EnhancementOR2STK12 and OR2MIN12

available with color enhancement as shown.

See pages 6, 7, 8 for additional undated stock pewter ornaments

add $1.80(c)add $2.00(c)

ASI 62570PPAI 112175

UPIC IMCSAGE 51745

5

*

*



6


OR2STK19

OR2MIN25OR2STK25

OR2MIN21 - Actual SizeOR2STK21

OR2MIN22OR2STK22


DELIvERyImprinted: 10 working days. When requested, 5 days with no rush charges.Add 5 days for color enhancement as shown.Non-imprinted: Same day service!



100 250 500 1000OR2STKI 12.80 9.90 8.50 7.50


OR2MINI 9.90 7.80 6.90 6.00


OR2STKB 10.00 8.00 7.50 7.00


OR2MINB 6.50 5.50 5.20 4.90


OR2MIN17OR2STK17 - Actual Size

See pages 4-5 for additional undated stock pewter ornaments


Full size ornaments are 2.25” diameter or equivalent. Mini size ornaments are 1.875” diameter or equivalent.

*

*

*

*



OR2STK18

OR2STK28

OR2MIN20OR2MIN18

OR2STK20

OR2MIN26OR2STK26

See page 8 for additional undated stock pewter ornaments

Optional Color EnhancementOR2STK20 and OR2MIN20

available with color enhancement as shown.

add $1.00(c)add $1.00(c)

ASI 62570PPAI 112175

UPIC IMCSAGE 51745

7

**

*


Our In Loving Memory Ornaments are offered with laser imprints. Price includes reverse side imprint. Personalization charges are $3.00 (A) each ornament. No tooling/set up fees, and these ornaments also include tinsel cord and red envelope. Production time: 5 working days.

in loving Memory Sunset(A) 10 25 50 75 100OR2STK24LI 17.00 15.50 14.80 14.40 13.80

in loving Memory hands(A) 10 25 50 75 100OR2STK27LI 16.00 14.50 13.80 13.40 12.80

Contact factory for larger quantity quotes.

in loving Memory OrnamentsOR2STK24 OR2STK27


8See pages 4-7 for additional

undated stock pewter ornaments


DELIvERyImprinted: 10 working days. When requested, 5 days with no rush charges.Add 5 days for color enhancement as shown.Non-imprinted: Same day service!



100 250 500 1000OR2STKI 12.80 9.90 8.50 7.50


OR2MINI 9.90 7.80 6.90 6.00


OR2STKB 10.00 8.00 7.50 7.00


OR2MINB 6.50 5.50 5.20 4.90



OR2MIN29OR2STK29

OR2MIN31

OR2MIN37

OR2STK31

OR2STK37

OR2MIN30

OR2MIN36

OR2STK30

OR2STK36


OR2STK29, OR2MIN29, OR2STK30, OR2MIN30, OR2STK31, and OR2MIN31 available with color enhancement as shown.

Optional Color Enhancement

add $1.00(c)add $1.00 (c)

add $1.80(c)add $2.00(c)

add $2.00(c)add $2.70(c)

add $3.20(c)add $3.50(c)

*

*

*


Twelve Days of Christmas

Ornaments

OR2DAy10

OR2DAy4

OR2DAy5

OR2DAy3

OR2DAy1OR2DAy2

OR2DAy6

OR2DAy9

OR2DAy7

OR2DAy8

OR2MINDAy11 - Actual Size OR2DAy12 - Actual Size

Our Stock “12 Days of Christmas” Series Ornaments are available with a reverse side imprint or with a blank back suitable for engraving.


DELIvERyImprinted: 10 working days. When requested, 5 days with no rush charges.Non-imprinted: Same day service!



100 250 500 1000OR2DAyI 12.80 9.90 8.50 7.50


OR2MINDAyI 9.90 7.80 6.90 6.00Less than minimum: Add $80(g).Absolute minimum: 25 pieces.


OR2DAyB 10.00 8.00 7.50 7.00


OR2MINDAyB 6.50 5.50 5.20 4.90


OR2MINDAy1OR2MINDAy2

OR2MINDAy3

OR2MINDAy4

OR2MINDAy5

OR2MINDAy6

OR2MINDAy7

OR2MINDAy8

OR2MINDAy9

OR2MINDAy10


OR2DAy11 OR2MINDAy12

*


9ASI 62570

PPAI 112175UPIC IMC

SAGE 51745


10

Ornaments on this page shown approx. 75%

laser imprinted Stock and Charm OrnamentsOur Laser Imprinted Ornaments are perfect for small quantity requirements. 2009 Dated Charm Ornaments are dated on the ornament reverse side, and Undated Charm Ornaments have fully tooled front and mirror reverse sides.

TOOling, MOlD, anD arT ChargeThere are NO TOOLING, MOLD, OR ART CHARGES for these ornaments.

DeliveryImprinted: 2-5 working days.


PriCing (a)Full Size laser imprinted 2.25” dia. or equivalent

10 25 50 75OR2STKLI 16.00 14.50 13.80 13.40OR2STK14LI 16.00 14.50 13.80 13.40

Mini Size laser imprinted 1.875” dia. or equivalent 10 25 50 75

OR2MINLI 14.00 12.50 11.80 11.40

2009 Dated Charm Ornament10 25 50 75 100 250

OR20933 - Wreath Ornament with 2009 reverseOR20934 - Trumpets Ornament with 2009 reverseOR20935 - French Horn Ornament with 2009 reverse 18.00 16.00 14.00 13.50 12.50 11.50Undated Charm Ornament

10 25 50 75 100 250OR2STK33 - Wreath Charm Ornament without dateOR2STK34 - Trumpets Charm Ornament without dateOR2STK35 - French Horn Charm Ornament w/out date 18.00 16.00 14.00 13.50 12.50 11.50

OR2MIN26LI

OR2MIN31LI

OR2MIN25LIOR2MIN30LI

OR2MIN21LI

OR2MIN18LI

OR2MIN8LI

OR2STK26LI

OR2STK31LI

OR2STK39LI

OR2STK25LIOR2STK30LI

OR2STK21LI

OR2STK14LI

OR2STK18LI

OR2STK8LI

OR2MINDAy1LIOR2DAy1LI

10PIECE

MINIMuM

OR20933 Dated Reverse

OR20933 Mirror Image

Reverse

OR20933

OR20934Dated Reverse

OR20934Mirror Image

Reverse

OR20934

OR20935 Dated Reverse

OR20935 -Mirror Image

Reverse

OR20935

OR20936

OR2MIN36LI

OR2MIN20LI

OR2MIN3LI

OR2MIN17LI

OR2MIN12LI

OR2STK36LI

OR2STK20LI

OR2STK3LI Reverse Side Laser Imprint

OR2STK17LI

OR2STK19LIOR2STK12LI

Imprintable Charm Styles

Specify charm type when ordering. If charm type is not specified, a

pewter finish charm will be shipped

A - Pewter Finish Charm

B - Green Laser Charm


11


12


Custom Pewter OrnamentsCreate your own collector series. With a minimum of only 100 pieces, a truly custom collectible continuity program can be produced. Mini-size is 1-7/8” diameter or equivalent. Full-size is 2-1/8” diameter of equivalent.

TOOling (g)Two Dimension IMC Express® — No charge (Full Size or Mini-Size) Add for reverse side imprint $50Three Dimension Fully Modeled Full-Size (2.25 Diameter or equivalent) $480 Mini-Size (1.875” Diameter or equivalent) $400

Add for reverse side imprint $50 Delivery

10-20 working days for three dimensional.5-10 working days for two dimensional.


PriCing (a)50 100 250 500 1000 2500

Full Size with 3 Dimensional Tooling OR2C -- 11.00 9.00 8.20 7.20 6.80Full Size with 2 Dimensional Tooling OR2CE 13.50 11.00 9.00 8.20 7.20 6.80Mini Size with 3 Dimensional Tooling OR2CMIN -- 8.00 6.20 5.50 5.00 4.50Mini Size with 2 Dimensional Tooling OR2CEMIN 10.50 8.00 6.20 5.50 5.00 4.50Prices include silver tinsel cord. For optional red satin ribbon, add $0.30(c).For optional brass finish, add $0.60(a).For optional color fill or color enhancement contact factory.

Three Dimensional Fully Tooled

Mini-SizeShown with optional

color enhancement

Series not shown actual size

Shown with optionalcolor fill

Three Dimensional Fully Tooled

Two Dimensional iMC express®

13ASI 62570

PPAI 112175UPIC IMC

SAGE 51745

ORCCP01

ORCCP02

Optional Reverse Side Imprint

ORCCP01

ORCCP01

ORCCP02

Custom ColorPrint OrnamentsFour-color printed inserts are applied to one of our stock ornament housings. Choose from either oval or round housings. Optional reverse side imprint available.

TOOling/SeTUP (g)ColorPrint: $125Optional reverse side imprint: Add $50

Delivery20 working days.


PriCing (4aB)100 250 500 1000 2500

ORCCP01 - Oval custom ColorPrint ornament

ORCCP02 - Round custom ColorPrint ornament 13.00 11.00 10.30 9.40 8.60



14ASI 62570PPAI 112175UPIC IMCSAGE 51745

TOOLING (G)3 Dimensional insert: $240-$3502 Dimensional insert: $125

Delivery3 Dimensional insert: 21 working days.2 Dimensional insert: 10 working days, 5 days if requested.

PaCkagingRed holiday envelope

PriCing(4aB)Custom Charm Ornament

100 250 500 1000 2500OR2C0933- Wreath dated 2009 w/ custom charm OR2C0934- Trumpets dated 2009 w/ custom charmOR2C0935- French Horn dated 2009 w/ custom charm 11.00 9.80 8.40 8.00 7.00

OR2CSTK33- Wreath undated with Custom Charm OR2CSTK34- Trumpets undated with Custom Charm OR2CSTK35- French Horn undated with Custom Charm 11.00 9.80 8.40 8.00 7.00


OR20933 - Dated Reverse

OR20933

OR20934

OR20935



Custom Charm Ornaments

15ASI 62570

PPAI 112175UPIC IMC

SAGE 51745

Our ultra light weight custom brass ornaments are produced in thin gauge brass and finished in 24K gold plating.

TOOling (g)$200-$375Tooling is dependent on the complexity of the design and the hours required to convert photographic images to line art suitable for the etching process.

Delivery4 weeks from art approval.

PaCkagingRed holiday envelope and gold cord.

PriCing (3aB)100 250 500 1000

2.5” Custom etched OrnamentOR9C25 7.00 5.00 4.20 3.203.0” Custom etched OrnamentOR9C30 10.50 8.00 6.50 5.003.5” Custom etched OrnamentOR9C35 11.50 9.00 7.80 6.00

All shapes and sizes are available at no additional tooling charge. Use round shapes shown above for equivalent rectangular and free form shapes.

Custom etchedOrnaments


16


These stainless steel ornaments are available in round, oval, or snowflake shape (snowflake has pierced through areas). they are lightweight and economical. Logo only or logo with photographic scene.

TOOling (g)$130

Size2” x 2.25” Snowflake, 2.25” Round, or 2.5” Oval

Delivery4 weeks from art approval.

PaCkagingPoly bag and silver tinsel cord.

PriCing (a)100 250 500 1000 2500

OR9C700 5.50 3.60 2.50 1.90 1.70

Contact factory for custom shapes.

Stock enamel Ornaments

Our 4” enamel snowflake and 3” enamel wreath are lightweight and come with a custom 1.5” imprintable laser insert for special events and holiday gift giving.

TOOling, MOlD, anD arT ChargeThere are NO TOOLING, MOLD, OR ART CHARGES for laser imprint of stock enamel ornaments.

Delivery2-5 days from art approval.

PaCkaging Silver tinsel cord and red holiday envelope.

PriCing (a)10 25 50 100 250 500

OR9STK01 - 4” Stock Enamel Snowflake OrnamentOR9STK02- 3” Stock Enamel Wreath Ornament 16.00 14.00 11.00 9.00 8.30 7.90

17ASI 62570

PPAI 112175UPIC IMC

SAGE 51745

Stainless Steel lightweights



18

Solid Brass and nickel Silver Stock Ornaments

Optional EngravingFor Non-Imprinted Back

OR401B OR401N

OR402B OR402N

OR403B OR403N

OR411B OR411N OR412B OR412N

OR413B OR413N

Choose from six classic mint quality designs struck in brass or nickel silver. Each design is offered with reverse side imprint or plain back suitable for engraving.

TOOlingNo tooling charge for reverse side imprint including logos and signatures.

DeliveryImprinted: 21 working days unless arranged with factory.Non imprinted: Same day service!

PaCkagingRed satin ribbon and red holiday velour pouch are included in price.

PriCing (a)imprinted 100 250 500 1000 Brass angelOR401BI 14.00 10.50 9.40 8.80nickel Silver angelOR401NI 16.00 12.50 11.40 10.80Brass Santa ClausOR402BI 14.00 10.50 9.40 8.80nickel Silver Santa ClausOR402NI 16.00 12.50 11.40 10.80Brass horse Drawn SleighOR403BI 14.00 10.50 9.40 8.80nickel Silver horse Drawn SleighOR403NI 16.00 12.50 11.40 10.80Brass Winter Cabin OR411BI 11.00 8.50 7.50 6.80nickel Silver Winter CabinOR411NI 12.50 10.00 9.00 8.30Brass Door OR412BI 11.00 8.50 7.50 6.80nickel Silver DoorOR412NI 12.50 10.00 9.00 8.30Brass Fireplace OR413BI 11.00 8.50 7.50 6.80nickel Silver FireplaceOR413NI 12.50 10.00 9.00 8.30non imprinted

12 50 100 OR401BB, OR402BB, OR403BB 10.00 9.00 8.50OR401NB, OR402NB, OR403NB 12.00 11.00 10.50OR411BB, OR412BB, OR413BB 8.00 7.00 6.50OR411NB, OR412NB, OR413NB 9.50 8.50 8.00Optional engraved Back

For Non Imprinted Ornaments Straight line copy set up 15.00 Engraving charge per line 2.00

Ornaments on this page shown at actual sizeASI 62570

PPAI 112175UPIC IMC

SAGE 5174519

Custom Solid Brass and nickel Silver Ornaments

Choose from either brass or nickel silver to create your mint quality design.

TOOling (g)Front Die: $375Reverse Die: $260Trim Tool: $500-$975(Trim tool is only required for special shapes such as buildings that are shown. Trim tool charge, when required is in addition to die charges).

DeliveryImprinted: 21-28 working day unless arranged with factory. 28-35 working days if trim tool is required.

PaCkagingRed satin ribbon and red holiday velour pouch are included in price.

PriCing (4aB)100 250 500 1000 2500

2” BrassOR4CLB 14.00 11.00 9.20 8.00 7.40

2” nickel SilverOR4CLN 16.00 13.00 11.20 10.00 9.40

1.5” BrassOR4CSB 12.00 9.00 7.20 6.00 5.40

1.5” nickel SilverOR4CSN 13.50 10.50 8.70 7.50 6.90

20

Art, Die, and Product Proof Preparation1. Tooling for our products can be created by a variety of techniques and tooling charges vary with size, method of manufacture, and type of art and die modeling required. ARTWORK FORMATS1. Black and white camera ready artwork.2. Vector art: Adobe Illustrator (PC/Mac) or Corel Draw (PC).3. Bitmap art — black and white, no shading, not anti-aliased (TIF, JPG, EPS).4. Scans should be larger than actual size and at least 300 dpi. We can also accept laser printed art at a minimum of 600 dpi and at a scale of at least 4:1.

We will develop art for jobs with reference material not complying with these guidelines, but additional development costs may be charged. Creation of artwork will be charged at $75(G) per hour (1/2 hour minimum).

For three dimensional sculpture additional reference material must be provided including photographs, high quality line drawings, or product brochures.

2. For all products we prepare a basic art layout for your approval. After art approval and die development, we submit either a pre-production proof or electronic scan of proof. Pre-production proof charges may apply for certain products. Please contact factory.

3. Our tooling and die development charge is a one time charge to cover all dies and production molds. This charge does not repeat with reorders if reorder is for same product with no changes. We maintain all models, molds, dies, and tools as our property for your exclusive use.

Production TimeAfter pre-production proof/scan has been approved, we will begin production to meet your needs. Production times vary depending on the type of product ordered and your specific requirements. Please be specific about your exact use date so that we can schedule and ship most efficiently. Rush Orders: Just ask, we’ll make every accommodation possible.Shipping1. Prices are FOB factory in Indiana. Please specify method of shipment and carrier or we will use our best judgment. 2. No charge for drop shipping entire order to one destination.3. Multiple destination shipments: add $5.00(Z) per destination plus actual shipping charges. Overruns and Under-runsWe make every attempt to ship the exact quantity ordered, but we reserve the right to ship and invoice 5% over/under quantity ordered.less than MinimumAcceptable minimum is lowest quantity listed for each product as described in catalog. Some exceptions can be made for specific products. Please contact factory for specific requests.Customer Supplied insertionsIMC will insert customer supplied material (cards, bar codes, etc) at minimum rate of $0.25(G). We are happy to quote complicated insertions upon request.Customer Supplied PackagingIMC will quote, on request, inserting our product in customer supplied packaging.

Mechanical and laser engravingMost of our metal products can be mechanically engraved by diamond cut engraving or deep rout engraving. If not specified within each product category, please request information. Trademarks/logosIMC assumes no responsibility for determining who does or does not hold claim to a trademark or logo. Logos or trademarks depicted herein are to show capability only. These designs are not available for sale and do not imply endorsement of any products within this catalog. Logo-bearing merchandise can only be purchased by or through the company to which the logos or symbols belong.PersonalizationMost of our products can be personalized with individual names or event or tournament names. Our in-house laser and mechanical engraving insures quick, accurate turn-around time on both metal and leather products. Personalization is a low cost option that increases value and appreciation for our products. awardsFor the past several years, Indiana Metal Craft has won multiple Promotional Products Association Supplier Achievement Awards in both the Casting and Die Striking Categories. Our award winning die cutters, model makers, and graphics staff would love to assist you in creating your company award or memento.

holiday lapel Pins

Optional Packaging

Choose from our stock enamel and stock pewter lapel pins. Always shipped from our inventory. Styles may be mixed for quantity pricing.

PeWTer laPel PinS6-99 100 250 500

ORP251 - Pewter Tree ORP252 - Pewter Snowflake ORP253 - Pewter Bells ORP254 - Pewter “Seasons Greetings” ORP255 - Pewter “Happy Holidays” ORP256 - Pewter “Feliz Navidad” 3.00 2.50 2.10 2.00ORP951 - Enamel Tree 3.00 2.50 2.10 2.00

(A)

12-499 500+White Gift Box (3.5” x 3.5”)PK2 0.85 0.75velour Pouch (4” X 5”)PK5I 1.35 1.20velour Pouch (2” X 3”)PK10I 0.85 0.76

(C)Available in Black, Red, and Royal Blue

For laser cut gift boxes for one or more ornaments, contact factory for information.

Pins on this page shown at actual size

general information

ORP251ORP252 ORP253

ORP951

ORP254 ORP255 ORP256

PK5I

PK10I

PK2

Custom Laser Box

ASI 62570PPAI 112175UPIC IMC

SAGE 51745© 2009 Indiana Metal Craft

Documents

Indiana Metal Craft Ornament 09