Index [] · Fil-Stik™ Putty Stick.....page 7 Sand Thru Stick ... foreign materials from surfaces prior to repair work or applying new finishes. ... Also used for cleaning

1 www.multimaster.com.au

Index Cleaners

Quick Clean......page 4

Wax Wash......page 4

Crystal and Glass Cleaner......page 5

Fillers

Fil-Stik™ Putty Stick......page 7

Sand Thru Stick......page 9

Quick Fill™ Burn-In Stick......page 10

Hard Fill......page 11

Hard Fill Kit......page 13

Hard Fill Plus .....page 15

E-Z Flow™ Burn-In Stick......page 17

Epoxy Putty Stick......page 19

Patchal® Putty......page 20

Fil-O-Wood™ Wood Putty Tube......page 21

Fil-O-Wood™ Wood Putty Can......page 22

Fil-Stik™ Putty Stick & Ultra™ Mark Marker Blister Pack......page 100

Burn-in Tools & Accessories

Burn-in Balm......page 24

Burn-in Knife......page 24

E-Z Seal™ Pen......page 24

Micro Therm Flameless Heat Gun......page 24

Burn-In Knife, Battery Operated......page 25

Hard Fill Levelling Tool......page 25

Hard Fill Scraper......page 25

Finish & Filler Scraper......page 25

Colour Replacement & Adjustment

Pro-Mark™ Marker......page 27

Ultra™ Mark Marker......page 29

Background Marker......page 31

Background Marker Glaze Hang-Up......page 32

Quik-Tip Marker™......page 32

Accent Pencils......page 33

Blendal® Sticks......page 34

Blendal® Powders......page 36

Ultra Classic™ Toner ......page 37

Tone Finish Toner ......page 38

Block-It™ Toner......page 39

Shadow Toner......page 40

Graining

Brush Tip Graining Marker......page 42 Graining Pencils......page 44 Ultra® Fine Grainer......page 44

Sanding Sealers

E-Z Vinyl® Sealer Aerosol......page 46 Pre-Catalysed Sanding Sealer......page 47 Tone Finish Flat Easy Sanding Sealer......page 48

Clears

Ultra™ Bond Waterborne Clear Finish Marker......page 50

Blend-Its......page 51

Finish-Up™ Polyurethane......page 52

Tone Finish® Clears......page 53

Ultra-Flo Ultra® Bond Clear......page 54

Pre-Catalysed Clears......page 55

Perfect Blend™......page 56

Perfect Blend ™ Waterborne......page 57

Clear Spray Shellac......page 58

Wil Pro™ Padding Finish......page 59

Waterborne Pre-Catalysed Lacquer......page 60

Finisher’s Choice Clear Lacquer......page 61

Waterborne Brushing Urethane......page 62

Classic Instrument Lacquer......page 62

Retarders & Reducers

No Blush™ Plus Retarder......page 64

No Blush™ Blender Flat......page 65

Super Blush™ Retarder......page 66

Blender Flow-Out™......page 67

Lacquer Reducer 2255......page 68

Rubbing Compounds

Wool-Lube Rubbing Lubricant......page 70

Liquid Rubbing Compound......page 71

Poly-Buf™ Rubbing Compound......page 72

Pumice Stone......page 73

Polishes

Oz® Polish......page 75

Scratch Off™......page 75

Furniture Cleaner & Restorer ......page 76

Scratch & Mar Resister Polish......page 76

Continued over page....

index cont.


Adhesives

Instant Adhesive Cyanoacrylate Glue......page 78 Aerosol Adhesive......page 79 Loctite® Vinyl, Fabric & Plastic Adhesive......page 79

Lubricants

E-Z Slip™ Lubricant......page 81

Hydro Care Wood Floor System

Hydro Cleaner Wood Floor Cleaner......page 83

Hydro Cleaner Wood Floor Protector......page 83

Natural Wax Care for Natural Oiled and Prefinished Floors......page 83

Colour Systems

Wiping Wood™ Stain Aerosol......page 85

Coloured Lacquer Enamel......page 86

Primer Sealer......page 87

Metallic Aerosol......page 87

Break-A-Way™ Glaze......page 88

Finisher’s Glaze™ Glazing Stain......page 89

Bronzing Powder......page 90

Miscellaneous

Danish Oil Aerosol......page 92

Lacquer for Brass Aerosol......page 92

Crackle Lacquer......page 93

Tools & Hardware

Mohawk Leveller Card......page 94

Finisher's Colourwheel™......page 94

Clear Bumper Disc......page 94

Pressure Unit Spray Tool......page 95

Power Pack (Preval)......page 95

Replacement Nibs......page 96

Spray Heads......page 96

Match All Graining Brush......page 96

Red Sable Art Brush #3......page 96

Mohawk Craftsman Apron......page 97

Pro-Mark™ Marker Pouch (Empty)......page 97

Training & Literature

Understanding Wood Finishing by Bob Flexner......page 97

Wood Touch-Up And Repair DVD......page 97

Professional Finishing Systems DVD......page 97

Repair Kits......page 98

Recommended Consumer Products

Fil-Stik™ Putty Stick & Ultra™ Mark Marker Blister Pack......page 100 Fil-Stik™ Putty Stick......page 101 Pro-Mark™ Marker......page 102 Ultra™ Mark Marker......page 103 Ultra™ Bond Waterborne Clear Finish Marker......page 104 Blend-Its......page 105 Hydro Cleaner Wood Floor Cleaner......page 106 Hydro Cleaner Wood Floor Protector......page 106 Natural Wax Care for Natural Oiled and Prefinished Floors......page 106

Mohawk Aerosol Collection

Aerosol Adhesive......page 79 Blender Flow-Out™......page 67 Block-It™ Toner......page 39 Break-A-Way™ Glaze......page 88 Clear Spray Shellac......page 58 Coloured Lacquer Enamel......page 86 Crystal and Glass Cleaner......page 3 Danish Oil Aerosol......page 92 E-Z Slip™ Lubricant......page 81 E-Z Vinyl® Sealer Aerosol......page 46 Finisher's Glaze™ Glazing Stain......page 89 Furniture Cleaner & Restorer ......page 76 Lacquer for Brass Aerosol......page 92 Metallic Aerosol......page 87 No Blush™ Blender Flat......page 65 No Blush™ Plus Retarder......page 64 Oz® Polish......page 75


Perfect Blend ™ Waterborne......page 57 Pre-Catalysed Clears......page 55 Pre-Catalysed Sanding Sealer......page 47 Primer Sealer......page 86 Quick Clean......page 4 Scratch & Mar Resister Polish......page 76 Scratch Off™......page 75 Super Blush™ Retarder......page 66 Tone Finish Flat Easy Sanding Sealer......page 48 Tone Finish® Clears......page 53 Tone Finish® Toner......page 38 Shadow Toner......page 40 Ultra Classic™ Toner ......page 37 Ultra-Flo Ultra® Bond Clear......page 53 Wax Wash......page 4 Wiping Wood™ Stain Aerosol......page 85

Cleaners

Quick Clean......page 4

Wax Wash......page 4

Crystal and Glass Cleaner......page 5


Quick Clean contains a combination of solvents that remove unwanted foreign materials from surfaces prior to repair work or applying new finishes. Quick Clean is ideal for cabinets, furniture, appliances, woodwork, and other finished surfaces.

Product number: M107-3012

Application method: Aerosol spray

Net contents: 13oz/365gm

Uses: 1. Clean and prepare surfaces for repair work or new finishes.

Advantages: 1. Dries quickly, low odour, non-greasy formula. 2. Removes labels and glue from most surfaces. 3. Removes unwanted glaze during the glazing process. 4. Cleans and prepares finished surfaces prior to applying an additional finish coat.


Removes wax, oil and foreign materials from most surfaces in one application. The presence of wax, oil or foreign materials can retard drying or cause defects in finishing top-coats. Prior to applying a new finish or repair, surfaces with Wax Wash™ Remover. Ideal for furniture, appliances, woodwork and other surfaces.




Uses: 1. Clean and prepare surfaces for repair work or new finishes.

Advantages: 1. Removes wax, oil and foreign materials from most surfaces. 2. Cleans and prepares finished surfaces prior to applying an additional finish coat.

Quick Clean

Wax Wash™ Remover

Windows, mirrors, and crystal remain clean longer when cleaned with Crystal and Glass Cleaner. This cleaner dries crystal clear in seconds without leaving a dirt catching film. Also used for cleaning refrigerators, stoves, chrome and other appliances.




Uses: 1. Clean glass and crystal. 2. Clean refrigerators, stoves and other appliances. 3. Clean chrome.

Advantages: 1. Easy to use. 2. Dries in seconds. 3. Non-dirt catching.

Crystal and Glass Cleaner


Fillers


Sand Thru Stick......page 9

Quick Fill™ Burn-In Stick......page 10

Hard Fill......page 11

Hard Fill Kit......page 13

Hard Fill Plus .....page 15

E-Z Flow™ Burn-In Stick......page 17

Epoxy Putty Stick......page 19

Patchal® Putty......page 20

Fil-O-Wood™ Wood Putty Tube......page 21

Fil-O-Wood™ Wood Putty Can......page 22

Filler Ease

of use Surface Position

Application Time

Durability Adhesion Sheen Page

Fil-Stik 1 V&H 1 1 1 Any 7

Sand Thru Stick

1 V&H 1 1 1 Any 9

Quick Fill 2 V&H 2 2 3 Any 10

Hard Fill 2 H 2 3 4 Any 11

Hard Fill + 2 H 2 4 4 Any 15

EZ Flow 5 H 3 3 5 High 17

Epoxy Stick 5 V&H 5 5 5 Any 19

Patchal® Putty 1 V&H 1 1 1 Any 20

Fil-O-Wood™ Wood Putty

4 V&H 5 4 4 Any 21 &

22

Filler Selection Guide


Fil-Stik™ Putty Stick

Mohawk’s Fil-Stik™ Putty Stick are the ultimate quick, convenient, mess free solution to nicks, nail holes, cracks, open corner joints, etc. Fil-Stiks are made from semi-hard putty, no heat or special tools are required, simply rub in and wipe off.

Type: Semi-hard putty

Durability: Low

Adhesion: Low

Dry time: Handle or top-coat immediately after application

Ease of use: No experience or special tools required

Suitable for: Vertical and horizontal surfaces

Uses: 1. To refill small areas of damage, such as

nicks, nail holes, cracks, open corner joints, etc.

Advantages: 1. No heat or special tools required. 2. Simply rub in and wipe off. 3. Fade resistant, non-bleeding permanent

colours. 4. May be top-coated immediately with Ultra™

Bond Waterborne Clear Finish Marker or other coatings.

5. A wide range of stock colours are available.

Use with: Mohawk Leveller Card Ultra™ Bond Waterborne Clear Finish

Marker (or top-coat of your choice)

Note: we recommend sealing the repair with Tone Finish Flat Easy Sanding Sealer before using Ultra™ Bond Waterborne Clear Finish Marker to reduce colour transferring onto the marker sponge.

Available as: Individual Colours M230-0202-12 White Fil-Stik™ 12 Pack M230-1200 12 Pack Assortment M230-1210 12 Pack Maple/Walnut

Assortment M230-1220 12 Pack Light Assortment M230-1250 12 Pack Standard Assortment M230-2400 24 Pack Furniture Store

Assortment M230-4720 72 Pack Assortment (indent) Fil-Stik™ Putty Stick/Ultra™ Mark Marker

Combo Kit

See over for available colours


Individual Colours Available in Blister Packs: M230-1516B Pine M230-9838B Old World Mahogany M230-9839B Rustic Cherry M230-2052B Medium Oak M230-0408B Cherry M230-0333B Heritage Oak M230-0209B Extra Dark Walnut M230-0207B Medium Brown Walnut M230-0202B White M230-0206B Light Walnut Individual Colours Available Loose: M230-0101 Natural Amber M230-0102 Natural Tone M230-0202 White M230-0207 Medium Brown Walnut M230-0225 Maple Rock M230-0229 Brown Mahogany/Toffee M230-0300 Fontana-New M230-0307 Heartwood Cherry M230-1516 Pine/Butterscotch M230-1522 Statesman Oak M230-2052 Medium Oak/Toffee M230-9840 Candlelight Cherry M230-9842 Light Fruitwood #2 M230-9848 Light Brown Mahogany 12 Pack Assortment: M230-0102 Natural Tone M230-0202 White M230-0224 Black M230-0229 Brown Mahogany M230-0307 Heartwood Cherry M230-0358 Dark Walnut M230-0408 Cherry M230-1516 Pine M230-1522 Statesman Oak M230-2052 Medium Oak M230-9847 Red Brown Mahogany M231-0390 Dark Cherry 12 Pack Maple/Walnut Assortment: M230-0206 Light Walnut M230-0207 Med. Brown Walnut M230-0209 Extra Dark Walnut M230-0225 Rock Maple M230-0234 Med. Dark Walnut M230-0236 Brown Maple M230-0237 Med. Rock Maple M230-0240 Colonial Maple M230-0358 Dark Walnut M230-0360 Honey Maple M231-0406 Salem Maple M231-1478 Van Dyke Brown 12 Pack Light Assortment: M230-0101 Natural Amber M230-0102 Natural Tone M230-0202 White M230-0222 Blonde M230-0233 Wheat M230-0303 Beige Tone M230-0331 Pickle Frost M230-0332 Light Nordic Oak M230-0334 Off White M230-0401 Almond M230-0402 Champagne M230-0412 Antique White

12 Pack Standard Assortment: M230-0100 Natural M230-0102 Natural Tone M230-0115 Deep Mahogany M230-0202 White M230-0206 Light Walnut M230-0207 Med. Brown Walnut M230-0209 Extra Dark Walnut M230-0218 L t. Red Mahogany M230-0224 Black M230-0237 Med. Rock Maple M230-0333 Heritage Oak M230-0411 Nutmeg 24 Pack Furniture Store Assortment: M230-0100 Natural M230-0102 Natural Tone M230-0115 Deep Mahogany M230-0202 White M230-0206 Light Walnut M230-0207 Med. Brown Walnut M230-0209 Extra Dark Walnut M230-0218 L t. Red Mahogany M230-0224 Black M230-0237 Med. Rock M230-0300 Fontana - New M230-0331 Pickle Frost M230-0333 Heritage Oak M230-0358 Dark Walnut M230-0401 Almond M230-0408 Cherry M230-0411 Nutmeg M230-0504 Winter Pine M230-1506 Provincial White M230-1516 Pine M230-2052 Medium Oak M230-9838 Old World Mahogany M230-9839 Rustic Cherry M230-L404 Light Fruitwood 72 Pack Assortment: M230-4000 Toasted Cinnamon 9730500TCM M230-4001 Pepper 9730500PP M230-4002 Maize Oak 9730500MEO M230-4003 Paprika 9730500PKM M230-4004 Butternut 9730500BNM M230-4005 Ginger 9730500GM M230-4006 Bronze/Oak M230-4007 Chestnut M230-4008 Nutmeg/Cherry M230-4009 Natural Hickory M230-4010 Natural Oak/Oak M230-4011 Paprika M230-4012 Fawn Glaze 9730500FZM M230-4013 Mocha Glaze 9730500MMZ M230-4014 Nutmeg M230-4015 Natural Cherry M230-4016 Honey Spice 9730500HS M230-4017 Cider M230-4018 Chilli Pepper M230-4019 Harvest M230-4020 Parchment 9730500A23 M230-4021 Caramel 9730500CRM M230-4022 Chicory 9730500CG M230-4023 Cinnamon 9730500CNAC M230-4024 Amber M230-4025 Slate 9730500SLT M230-4026 Fawn 9730500FN M230-4027 BCJC-1/Cinnamon Sugar M230-4028 Cognac Hickory

72 Pack Assortment cont. 9730500COH M230-4029 Slate Grey M230-4030 Gardenia 31-1000-506 M230-4031 Ebony Mist 12564787/4872669 M230-4032 Cordovan M230-4033 English Saddle 12564878/8906349 M230-4034 Cafe M230-4035 Praline M230-4036 Natural Maple M230-4037 Cherry Cider 12564761/4099446 M230-4038 Oak/Hickory Lt. Natural 1088459/12564944 M230-4039 Artisan Bronze 12564894/4872701 M230-4040 Oasis O.A. M230-4041 Burgundy M230-4042 Sunset 9730500SU M230-4043 Hickory Nat. Dark 12564928/4231452 M230-4044 Cabernet 9730500CBN M230-4045 Royal M230-4046 Natural 9730500NA M230-4047 Ginger Glaze 9730500GM M230-4048 Sunrise M230-4049 Toffee 9730500TF M230-4050 Maple Paprika 2564852/4775557 M230-4051 Chocolate Cherry/Cognac Maple 9730500CZC M230-4052 Mirage M230-4053 Oak Medium 12564910/1087469 M230-4054 Oak/Hickory Cider 12564936/6050215 M230-4055 Saddle M230-4056 Maple Natural 1586064 M230-4057 Light Fawn M230-4058 Eventide M230-4059 Chestnut 9730500CNM M230-4060 Amaretto 15663198 M230-4061 Dawn 114029 M230-4062 Mocha M230-4063 Autumn Blush 9730500AB M230-4064 Praline 9730500PRL M230-4065 Black Glaze/Kaffe 9730500EG M230-4066 Cherry Paprika 12564795/9279126 M230-4067 Sedona Maple 12564886/6223663 M230-4068 Sable Maple 12564860/7538291 M230-4069 Maple Caramel/Toffee 3323441 M230-4070 Peppercorn 9730500PPC M230-4071 Kona 12564829/11924370


Sand Thru Stick Sand Thru Sticks are used to add color edges where colour is missing due to sanding through a finish during the finishing process. This stick will not only add color but it can also fill in small imperfection on the edge. The Sand Thru Stick is very easy to use, simply rub the stick along the light edge to add color, blend the edge with your finger or a rag and then finish with your normal process.

Type: Hard Wax

Durability: Must be topcoated

Dry time: Handle or top-coat immediately after application



Uses: 1. To color to edges that have been sanded

through the color and finish 2. To fill “small” defects in the edge

Advantages: 1. Quick and easy to use 2. Can be used during your finishing process 3. Can be used after your finishing process 4. Can be used to fill in small imperfections on

the edge 5. 12 Stock colours

Use with: Must be top coated: use Ultra™ Bond

Waterborne Clear Finish Marker or topcoat of your choice

Available as: M211-1200 12 Pack Assortment (contains all

twelve individual colours) Individual colours

Individual Colours: M211-0001 Umber M211-0002 Flagstone M211-0003 Saddle M211-0004 White M211-0005 Sasparilla M211-0006 Conrad Pine M211-0007 Black M211-0008 Gray M211-0009 Antique White M211-0010 Salvage Oak M211-0011 Coach Cherry M211-0046 Coconut/Cotton/Brie/Heavy

Cream


Quick Fill™ Burn-In Stick Quick Fill® is an innovative Burn-In Stick that makes filling defects quick and easy. Designed to fill nicks, dents, and scratches, it’s the perfect filler for cabinetry, vinyl wrapped products and photo processed laminates. Quick Fill® is applied using a simple heat source and levelled without the use of burn-in knives or sandpaper.

Type: Hard Wax

Durability: Average

Adhesion: Good

Melting Point: 79.4 ºC (approx.)

Dry time: Top-coat immediately after application

Ease of use: Some skill required/ heat source required


Uses: 1. To fill nicks, dents, and scratches.

Advantages: 1. Low sheen. 2. Quick and simple application. 3. Perfect for production workers, field techs and cabinet

installers. 4. 36 stock colours. 5. Well balanced assortments available.

Use with: Micro Therm Flameless Heat Gun Mohawk Leveller Card Ultra™ Bond Waterborne Clear Finish Marker (or topcoat of

your choice)

Available as: Individual Colours M320-1200 12 Pack Assortment #1 M320-1201 12 Pack Assortment #2 M320-1202 12 Pack Assortment #3

Individual Colours: M320-0003 True Brown M320-0020 Statesman Oak M320-0029 Transparent Red Brown M320-0030 Transparent Orange Brown M320-0031 Transparent Yellow Brown M320-0032 Transparent Green Brown M320-0033 Transparent Deep Red Brown M320-0034 Natural Walnut M320-0036 Transparent True Brown

M320-0037 Mplin/Maple Linen

12 Assortment #1: M320-0001 Light Red Mahogany M320-0002 Deep Mahogany M320-0003 True Brown M320-0004 Extra Dark Walnut M320-0005 Cherry M320-0006 Red Brown Mahogany M320-0007 Light Golden Oak M320-0008 Nutmeg M320-0009 Heartwood Cherry M320-0010 Cinnamon Sugar M320-0011 Black M320-0012 White 12 Assortment #2 M320-0013 Deep Brown Cherry M320-0014 Dark Red Mahogany M320-0015 Perfect Brown M320-0016 Light Brown Mahogany M320-0017 Interior Maple Laminate M320-0018 Autumn Blush M320-0019 Honey Spice M320-0020 Statesman Oak M320-0021 Rock Maple M320-0022 Van Dyke Brown M320-0023 Antique White M320-0024 Driftwood 12 Assortment #3 M320-0025 Clear M320-0026 Natural Oak M320-0027 Natural Maple M320-0028 Natural Cherry M320-0029 Transparent Red Brown M320-0030 Transparent Orange Brown M320-0031 Transparent Yellow Brown M320-0032 Transparent Green Brown M320-0033 Transparent Deep Red Brown M320-0034 Natural Walnut M320-0035 Natural Mahogany M320-0036 Transparent True Brown

Micro Therm Flameless Heat Gun The Micro Therm™ Flameless Heat Gun is a hand held, self-igniting, flameless heat gun, powered by a refillable fuel cell. The Micro Therm™ is the perfect heat source for Quick Fill® Burn-In Sticks.



Hard Fill Hard Fill is made from a blend of hard waxes and is used to repair minor and medium defects in wood and rigid plastic. Recommended for repairs on floors, tops, fronts, sides, doors, drawers, any wood surface.

Type: Hard Wax

Durability: High

Adhesion: Very Good

Melting Point: 79.5ºC (approx.)

Dry time: Handle or topcoat once cooled

Ease of use: Some skill required / specialty tools required

Suitable for: Horizontal surfaces


Advantages: 1. Easy to learn and use. 2. Works for any sheen. 3. Excellent for dents. 4. Builds finish quickly. 5. Little to no sanding. 6. Safe for any finish. 7. Good for all sheens.

Recommended for: Flooring, retail furniture, cabinets & millwork. Perfect for all wood industries.

Use with: Burn-In Knife, Battery Operated Hard Fill Levelling Tool Finish & Filler Scraper Ultra™ Bond Waterborne Clear Finish

Marker (or sealer and topcoat of your choice)

Available as: M310-1001 10 Pack Assortment #1 M310-1002 10 Pack Assortment #2 M310-9990 Hard Fill Kit

See over for assortment colours


Hard Fill Levelling Tool The Grater comes complete with the Hard Fill Scraper and is designed with two different grating surfaces and edges.


Finish & Filler Scraper Scraper – The Scraper has four edges designed for scraping a finish or a filler.


Burn-In Knife, Battery Operated The Battery Operated Burn-In Knife is a convenient, portable and safe alternative to other hot knife tools available. This tool will melt the Hard Fill and Hard Fill Plus without a cord or a flame. Each unit will be packed with a pointed and a flat tip, batteries included. This portable soldering iron requires 3 x 1.5V AA batteries.


Assortment #1:

M310-0156 American Walnut

M310-0202 White

M310-0224 Black

M310-0360 Honey Maple

M310-0901 Clear

M310-1478 Van Dyke Brown

M310-4012 Fawn Glaze

M310-4038 Oak Hickory Light Natural

M310-4062 Mocha

M310-4071 Kona

Assortment #2

M310-0003 Dark Umber

M310-0012 Cream

M310-0032 Trans Green Brown

M310-0229 Brown Mahogany

M310-0354 Snow White

M310-0402 Champagne

M310-0902 Natural Tone

M310-1516 Pine

M310-1521 Antique Oak

M310-4057 Light Fawn


Hard Fill Kit

Mohawk's Hard Fill kit contains all the products and tools needed to repair and recolour minor and medium defects in wood and rigid plastic. This versatile kit, which comes in a handy carrying case, is recommended for repairs on floors, tops, fronts, sides, doors, drawers and wood surfaces.

Product Code: M310-9990



Recommended for: Flooring, retail furniture, cabinets &

millwork. Perfect for all wood industries.

Contents:

M314-Colour 40 Hard Fill Assortment 1.5 inch sticks (see over for colours)

M999-9995 Finish & Filler Scraper

M999-9990 Hard Fill Levelling Tool

M900-3400 BURN-IN KNIFE, Battery Operated

M265-2005 Brush Tip Graining Marker Black

M265-2006 Brush Tip Graining Marker Light Oak

M265-2002 Brush Tip Graining Marker Perfect Brown

M906-1104S Silicon Carbide Waterproof Sandpaper P800A Grit

M909-7415 Grey rubbing pad

M870-9201S 4 Each Cloth, lint free 12“x 13" 50/pack

M310-0000M Hard Fill Instruction Sheet


Hard Fill Kit colours:

M314 - 0000 Hard Fill Natural 47601 1.5 inch stick

M314 - 0004 Hard Fill Deep Red Mahogany 114 1.5 inch stick

M314 - 0007 Hard Fill Light Grey 7035 1.5 inch stick

M314 - 0030 Hard Fill New Fontana 48601 1.5 inch stick

M314 - 0032 Hard Fill Trans Green Brown 303 1.5 inch stick

M314 - 0079 Hard Fill Medium Tan 106 1.5 inch stick

M314 - 0202 Hard Fill White 9010 1.5 inch stick

M314 - 0218 Hard Fill Light Red Mahogany 113 1.5 inch stick

M314 - 0224 Hard Fill Black 9005 1.5 inch stick

M314 - 0240 Hard Fill Colonial Maple 138 1.5 inch stick

M314 - 0330 Hard Fill Sand Stone 155 1.5 inch stick

M314 - 0334 Hard Fill Off White 351 - 1 1/2"

M314 - 0340 Hard Fill Off White Seafoam 178 1.5 inch stick

M314 - 0354 Hard Fill Snow White 354 1.5 inch stick

M314 - 0360 Hard Fill Honey Maple 158 1.5 inch stick

M314 - 0369 Hard Fill American Brown Walnut 164 1.5 inch stick

M314 - 0401 Hard Fill Almond 201 - 1 1/2“

M314 - 0402 Hard Fill Champagne 203 1.5 inch stick

M314 - 0408 Hard Fill Cherry 48201 1.5 inch stick

M314 - 0415 Hard Fill Light Golden Oak 47801 1.5 inch stick

M314 - 0901 Hard Fill Clear 901 1.5 inch stick

M314 - 0902 Hard Fill Natural Tone 902 1.5 inch stick

M314 - 0905 Hard Fill Transparent Yellow 905 1.5 inch stick

M314 - 0907 Hard Fill Red 907 1.5 inch stick

M314 - 1506 Hard Fill Provincial White 355 1.5 inch stick

M314 - 2063 Hard Fill Silk 357 1.5 inch stick

M314 - 4006 Hard Fill Salem Maple 143 1.5 inch stick

M314 - 4012 Hard Fill Fawn Glaze 356 1.5 inch stick

M314 - 4035 Hard Fill Praline 103 1.5 inch stick

M314 - 4038 Hard Fill Oak Hickory Light Natural 154 1.5 inch stick

M314 - 4057 Hard Fill Light Fawn 159 1.5 inch stick

M314 - 4062 Hard Fill Mocha 121 1.5 inch stick

M314 - 4070 Hard Fill Peppercorn 163 1.5 inch stick

M314 - 4071 Hard Fill Kona 157 1.5 inch stick

M314 - 6869 Hard Fill Natural IV 156 1.5 inch stick

M314 - 7635 Hard Fill Mist 9001 1.5 inch stick

M314 - 8618 Hard Fill Arctic White 9016 1.5 inch stick

M314 - 9055 Hard Fill Gardenia 9003 1.5 inch stick

M314 - 9835 Hard Fill Heritage Cherry 166 1.5 inch stick

M314 - 9923 Hard Fill Amber White 353 1.5 inch stick


Hard Fill Plus Hard Fill Plus is made from a blend of hard waxes and is used to repair minor and medium defects in wood and rigid plastic. Recommended for repairs on floors, tops, fronts, sides, doors, drawers, any wood surface. Hard Fill Plus is harder and has a higher melting point than Hard Fill. Use Hard Fill Plus when additional durability is needed.

Type: Hard Wax

Durability: Very High

Adhesion: Very Good

Melting Point: 112.8ºC

Dry time: Handle or top-coat once cooled

Ease of use: Some skill required / specialty tools required




Recommended for: Flooring, retail furniture, cabinets & millwork. Perfect for all wood industries.

Use with: Burn-In Knife, Battery Operated Hard Fill Levelling Tool Finish & Filler Scraper Ultra™ Bond Waterborne Clear Finish Marker (or

sealer and top-coat of your choice)

Available as: M311-1001 10 Pack Assortment #1 M311-1002 10 Pack Assortment #2 M311-2000 20 Pack Assortment (all colours) See over for assortment contents








Assortment #1:

M311-0000 Natural

M311-0202 White

M311-0209 Extra Dark Wanlut

M311-0224 Black

M311-0331 Pickle Frost

M311-0401 Almond

M311-0901 Clear

M311-4006 Salem Maple

M311-4054 Oak Hickory Cider

M311-8618 Arctic White

Assortment #2

M311-0017 Interior Maple Laminate

M311-00192 Honey Spice

M311-0303 Beige Tone

M311-0340 Off White Seafoam

M311-0366 Caramel Umber

M311-0902 Natural Tone

M311-4035 Praline

M311-4071 Kona

M311-7635 Mist

M311-9835 Heritage Cherry


E-Z Flow™ Burn-In Stick Mohawk’s E-Z Flow™ Burn-In Sticks make it easy to produce professional burn-in repairs. With a large range of clean, consistent colours, and a special formula that ensures excellent flow and levelling properties, Mohawk E-Z Flow™ Burn-In Sticks set the benchmark for burn-in repairs.

Type: Epoxy resin

Durability: High

Adhesion: Excellent

Melting Point: 135 ºC (approx.)

Dry time: Handle or top-coat once cooled

Ease of use: Experience recommended / specialty tools required


Uses: 1. To fill and recolour damaged areas of timber surfaces.

Advantages: 1. Excellent melt and flow characteristics. 2. Excellent adhesion to the substrate. 3. Levels easily with no cup-out. 4. Resists swelling and shrinkage from top-coats. 5. Transparent colours have exceptional clarity. 6. Clean, consistent colours. 7. Large colour range (sixty colours available).

Use with: Burn-In Balm™ Burn-In Knife E-Z Seal™ Pen

Available as: Individual 7” Sticks M315-1200 12 Pack Standard Assort. 7” Sticks M315-1210 12 Pack Maple/Walnut Assort. 7”

Sticks M316-3000 30 Pack Assortment 2” sticks See over for assortment contents.

Individual Colours Available: M315-0401 Almond M315-0359 Walnut M315-0331 Pickle Frost M315-0224 Black M315-0206 Light Walnut M315-0202 White M315-0100 Natural Transparent M315-0009 Light Transparent Amber M315-0007 Medium Transparent Amber M315-0001 Water Clear Transparent M315-0338 Nutmeg Tan M315-0285 Biscayne Red M315-0246 Red Mahogany M315-0373 Light Salem Maple M315-7020 Dark Oak

Burn-in Balm Burn-in Balm prevents excess E-Z Flow® Burn-in Sticks from adhering to surrounding area of the timber as they are removed with the Burn-in Knife. Product number: M401-1203 Size: 113g

Burn-in Knife A quality burn-in knife is essential for burn-in repairs. This sleek, cordless butane burn-in knife is small, light and easy to control, making professional quality burn-in repairs a breeze. Product number: M900-3210


12 Pack Standard Assortment:

M315-0001 Water Clear Transparent

M315-0105 Red Mahogany

M315-0141 Transparent Honey

M315-0202 White

M315-0224 Black

M315-0337 Golden Oak

M315-0340 Off White / Seafoam

M315-0366 Carmel Umber

M315-0408 Cherry


M315-2052 Medium Oak

M315-7020 Dark Oak 12 Pack Maple/Walnut Assortment:


M315-0205 Medium Walnut

M315-0206 Light Walnut

M315-0209 Extra Dark Walnut

M315-0240 Colonial Maple

M315-0359 Walnut

M315-0367 Dark Transparent Walnut

M315-0370 Dark Salem Maple

M315-0371 Radio Walnut

M315-0373 Light Salem Maple


M315-8374 Medium Brown Maple

30 Assortment Pack:

M315-0001 Water Clear Transparent

M315-0007 Medium Transparent Amber

M315-0008 Dark Transparent Amber

M315-0009 Light Transparent Amber

M315-0079 Medium Tan

M315-0100 Natural Transparent


M315-0115 Deep Mahogany

M315-0141 Transparent Honey

M315-0202 White

M315-0206 Light Walnut


M315-0224 Black

M315-0226 Sheraton Mahogany

M315-0227 Dark Red Mahogany

M315-0246 Red/Orange Mahogany

M315-0285 Biscayne Red

M315-0314 American Green

M315-0331 Pickle Frost


M315-0338 Nutmeg Tan

M315-0359 Walnut

M315-0390 Dark Cherry

M315-0401 Almond

M315-0415 Light Golden Oak


M315-1516 Pine

M315-7020 Dark Oak

M315-8359 Brown Cherry

M315-L404 Light Fruitwood


Epoxy Putty Stick

With Mohawk’s Wood Epoxy Putty Sticks you can restore, rebuild and repair just about any surface. Epoxy Putty Sticks make permanent, durable repairs that can be sanded, drilled, stained and finished just like timber, enabling you to make repairs that are virtually undetectable and that will last the life of the furniture.

Type: Two-part epoxy putty

Durability: Excellent

Adhesion: Excellent

Working time: 3-6 minutes (depending on colour)

Cure time: 20-30 minutes

Ease of use: Experience recommended


Uses: 1. To fill damage to timber surfaces. 2. To replace, rebuild, or reshape wooden parts. 3. To repair damage to other surfaces, including metals and ceramics.

Advantages: 1. Makes durable, permanent repairs. 2. Easy to use. 3. Fast curing, hardens in 20-30 minutes. 4. No shrinkage. 5. Moulds to any shape. 6. Excellent adhesion to wood, metal, glass and ceramics. 7. Can be sanded, drilled, stained and painted. 8. Available in a range of colours that can be easily mixed to create custom colours (colour mixing guide available).

Available as: Individual sticks (57 g tube pack)

M743-1200 12 Pack Assortment

Individual Colours Available: M743-1500 Beige M743-1520 White M743-1510 Pine M743-1530 Oak/Light Walnut M743-1540 Mahogany M743-1550 Cherry M743-1560 Walnut M743-1570 Black M743-1575 Natural Oak M743-1580 Natural Maple M743-1585 Natural Cherry M743-1590 Raw Umber The 12 Pack Assortment contains one of each colour


Patchal® Putty

Patchal® Putty is simply the best finish putty that you will ever use. It is an easy to use filler designed for use on small cosmetic repairs. Patchal® Putty is designed to be used on finished wood to fill nail holes, mitre joints and cabinet seams. Patchal® Putty may be top-coated with

lacquer for increased durability.

Type: Soft wax putty

Dry time: Can be top-coated within minutes



Size: 4.4oz/125g

Uses: 1. For small cosmetic repairs (not

recommended for tabletops or other surfaces subjected to wear).

Advantages: 1. Fast easy application and simple clean up. 2. Superior colour selection matched to current

industry trends. 3. Fade resistant, non-bleeding permanent

colours. 4. May be top-coated within minutes. 5. Easy open packaging keeps putty fresh.

Use with: Mohawk Leveller Card, or cloth Topcoat of your choice

Available as: M734-0001 Black M734-0002 White M734-0015 Extra Dark Walnut M734-0016 Van Dyke Brown M734-2400 24 Assortment (24 x 4.4 oz )

24 Assortment: M734-0001 Black M734-0002 White M734-0003 Beige Tone M734-0004 Light Red Mahogany M734-0006 Wine M734-0007 Cherry M734-0008 Warm Cherry M734-0009 Rock Maple M734-0010 Cinnamon M734-0011 Natural Cherry M734-0012 Burnt Sienna M734-0013 Hickory M734-0014 Mocha M734-0015 Extra Dark Walnut M734-0016 Van Dyke Brown M734-0017 Natural Oak M734-0018 Natural Maple M734-0019 Ginger M734-0020 Raw Sienna M734-0021 Nutmeg M734-0022 Honey Spice M734-0023 Natural Maple Laminate M734-0024 Fawn


Fil-O-Wood™ Wood Putty Tube

Mohawk Fil-O-Wood™ Wood Putty is an extra fine textured, water-based putty, which can be easily applied to fill corner chips, holes, cracks, screw holes and other defects. Recommended for both finishing and touch-up repair jobs where time is not of the essence, or where the hole is too large to fill with a Mohawk Burn-In Stick. This product is applied in the same manner as most other wood fillers. Slightly overfill, let dry, sand and top-coat.

Type: Water-based putty

Dry time: Depends on the depth of the defect

Ease of use: Some skill required


Size: 3oz/85g

Uses: 1. To refill corner chips, holes, cracks, screw

holes and other defects.

Advantages: 1. Mild solvent system will not harm the

surrounding finish. 2. Dries with minimum shrinkage and sands

quickly. 3. Easy water clean-up. 4. Non-toxic, non flammable. 5. Mohawk Blendal Powders can be mixed into

Fil-O-Wood to create custom colours. 6. Can be moulded, chiselled, sawed, stained

and top-coated. 7. Great for production work and all wood

repairs. 8. Mar resistant.

Use with: Mohawk Leveller Card, or putty knife Ultra™ Bond Waterborne Clear Finish

Marker (or sealer and top-coat of your choice)

Available as: Individual colours M742-2400 4 Pack Assortment

Individual Colours Available: M742-2000 Natural* M742-2002 Natural Oak M742-2005 Dark Walnut* M742-2006 Colonial Maple M742-2007 Dark Maple M742-2008 Red Mahogany M742-2009 Amber Natural M742-2011 Cherry* M742-2012 Golden Oak M742-2020 Fruitwood* * Assortment contents



Mohawk Fil-O-Wood™ Wood Putty is an extra fine textured, water-based putty, which can be easily applied to fill corner chips, holes, cracks, screw holes and other defects. Fil-O-Wood™ Wood Putty dries fast, is easy to use, and accepts stains, finish or paint. Recommended for both finishing and touch-up repair jobs where time is not of the essence, or where the hole is too large to fill with a Mohawk Burn-In Stick. Can be sawed, drilled or carved. Fil-O-Wood™ wood putty hardens when exposed to air.

Type: Water-based putty

Dry time: Depends on by the depth of the defect

Ease of use: Some skill required


Size: 1 Gallon/3.78 litres

Uses: 1. To refill corner chips, holes, cracks, screw

holes and other defects.

Advantages: 1. Mild solvent system will not harm the

surrounding finish. 2. Dries with minimum shrinkage and sands

quickly. 3. Easy water clean-up. 4. Non-toxic, non flammable. 5. Mohawk Blendal Powders can be mixed into

Fil-O-Wood to create custom colours. 6. Can be moulded, chiselled, sawed, stained

and top-coated. 7. Great for production work and all wood

repairs. 8. Mar resistant.

Use with: Mohawk Leveller Card, or putty knife Ultra™ Bond Waterborne Clear Finish

Marker (or sealer and top-coat of your choice)

Available as: M741-1017 Natural Oak


Burn-In Tools & Accessories

Burn-in Balm......page 24

Burn-in Knife......page 24

E-Z Seal™ Pen......page 24

Micro Therm Flameless Heat Gun......page 24

Burn-In Knife, Battery Operated......page 25

Hard Fill Levelling Tool......page 25

Hard Fill Scraper......page 25

Finish & Filler Scraper......page 25


E-Z Seal™ Pen Burn-in Knife

Burn-In Tools & Accessories Burn-in Balm Burn-in Balm prevents excess E-Z Flow® Burn-in Sticks from adhering to surrounding area of the timber as they are removed with the Burn-in Knife. Product number: M401-1203 Size: 4oz/113g

Advantages: 1. Easy to use. 2. Makes for a quicker repair. 3. Minimises sanding..

Use with: E-Z Flow™ Burn-In Stick

Micro Therm Flameless Heat Gun The Micro Therm™ Flameless Heat Gun is a hand held, self-igniting, flameless heat gun, powered by a refillable fuel cell. The Micro Therm™ is the perfect heat source for Quick Fill® Burn-In Sticks.


Advantages: 1. Hand held, automatic electronic ignition 2. Patented safety lock 3. Produces 700ºC flameless heat 4. Refillable fuel cell-disposable butane lighter 5. Compact ergonomic design

Use with: Quick Fill® Burn-In Sticks

A quality burn-in knife is essential for burn-in repairs. This sleek, cordless butane burn-in knife is small, light and easy to control, making professional quality burn-in repairs a breeze. Product number: M900-3210

Features: 1. Cordless. 2. Butane powered. 3. Made of durable plastic, ultra-light weight. 4. Compact and economical to use. 5. Good balance helps make burn-ins easier. 6. Built in stand. 7. Dependable self-ignition system. 8. Durable with no moving parts. 9. Easy to fill. 10. Fill once with butane fuel for an hour of use. 11. Comes with a flat burn-in blade. 12. Adjustable temperature control.

Use with: E-Z Flow™ Burn-In Stick Burn-in Balm Hard Fill Hard Fill Plus

Use this product over a E-Z Flow® Burn-in Sticks to prevent the higher gloss that shows through in matt or low sheen top-coats. Product number: M295-0001

Uses: 1. To reduce the sheen of burn-in repairs.

Advantages: 1. Good lacquer holdout. 2. Dries quickly. 3. Easy to use.

Use with: E-Z Flow Burn-In Stick

Replacement Nibs: M264-1004 Acrylic Chisel Tip (24 pack)


Hard Fill Tools


Straight Grater Surface: these teeth are positioned to have a grating action to level the Hard Fill.

Angled Grater Surface: these teeth are positioned to have a shearing action to level the Hard Fill.

Rounded Grater Edge: these teeth are designed to level a rounded recessed area along a profile.

Straight Grater Edge: these teeth are designed to level a 90° recessed area along a profile.

Use with:

Hard Fill

Hard Fill Plus


Hard Fill Scraper (replacement) Replacement scraper for the Hard Fill Levelling Tool. The Scraper has one edge designed for scraping and one edge designed to clean the teeth of the Grater.

Use with: Hard Fill Levelling Tool.



Use with: Hard Fill Hard Fill Plus



Use with: Hard Fill Hard Fill Plus



Colour Replacement & Adjustment



Background Marker......page 31

Background Marker Glaze Hang-Up......page 32

Quik-Tip Marker™......page 32

Accent Pencils......page 33

Blendal® Sticks......page 34

Blendal® Powders......page 36

Ultra Classic™ Toner......page 37

Tone Finish Toner......page 38

Block-It™ Toner......page 39

Shadow Toner......page 40


Pro-Mark™ Marker

Whether you need to touch-up 1 inch or 20 feet, the dye-based Pro-Mark II marker does it the first time and every time. Pro-Mark™ Marker colours have excellent resistance to fading, colour shift from top-coats, and will not bleed. The nib offers superior flow along with the durability needed to do all normal repair work. The nib remains usable for the life of the marker. Pro-Mark™ Markers have good adhesion and mark equally well with the edge, the bottom or the tip.

Colorant: Dye

Application method: Marker

Opacity: Transparent

Uses: 1. Re-colouring edges and scratches.

Advantages: 1. Fast and easy to use. 2. Excellent flow. Will not skip even when used on porous materials. 3. Good adhesion to most surfaces and resistance to polishes. 4. Uniform colour strength. 5. Bleed resistant. 6. Nib remains usable for the life of the marker for normal applications. 7. Can be used at any angle, including upside down. 8. Highest rated lightfast dyes for complete clarity and colour retention. 9. Transparent colour allows the characteristics of the wood to show through.

Use With: Pro-Mark™ Markers can be used as a stand-alone product, but we recommend that you apply a top-coat, to obtain maximum durability.

Alternative Products: Ultra™ Mark Marker

Brush Tip Graining Markers

Blendal® Stick

Blendal® Powder

Available as:

Individual colours

M267-1202 12 Pack Assortment #1


Individual Colours Available: M267-0004 Light Oak 9731220 M267-0321 Marker Natural Light Oak

9731225 M267-0081 Natural Amber 9731221 M267-0411 Nutmeg 9731229 M267-0479 Maple Glaze 9731232

Individual Colours Available in Blister Packs: M267-1516B Pine M267-0484B Brown Paprika M267-0408B Cherry M267-0388B Cherry/Fruitwood M267-0385B Deep Cordovan M267-0364B Heartwood Walnut M267-0363B Dark Red Walnut M267-0249B Perfect Brown M267-0246B Red Brown Mahogany M267-0207B Medium Walnut/Brown Pecan M267-0063B Honey Maple M267-0418B Mocha Brown M267-0474B Warm Oak See over for assortment contents.


12 Assortment #1


M267-0081 Natural Amber

M267-0094 Warm Brown Walnut

M267-0194 Antique Maple

M267-0208 Old World Walnut


M267-0381 Cherry/Walnut

M267-0418 Mocha Brown

M267-0474 Warm Oak

M267-0477 Natural Maple

M267-0479 Maple Glaze

M267-0484 Brown Paprika 12 Assortment #4

M267-0094 Warm Brown Walnut

M267-0207 Medium Walnut/Brown Pecan

M267-0224 Plum Black


M267-0266 Newport-Ebonized Cherry


M267-0355 Medium Oak

M267-0365 Warm Walnut

M267-0387 Mahogany



M267-1516 Pine


Ultra™ Mark Marker

Mohawk’s Ultra™ Mark Markers contain light-fast pigments which seal, stain and finish in one easy operation. They are compatible with all types of finishes, making them ideal for edge and scratch re-colouring. For further protection, markers may be finished with Tone Finish® Clears, or other top-coats, including lacquers, acrylics, varnishes and urethanes.

Colorant: Pigment


Opacity: Medium

Uses: 1. Re-colouring edges and scratches. 2. Colouring repairs made with Mohawk fillers,

particularly Fil-Sticks.

Advantages: 1. Fast and easy to use. 2. Valve type tip provides fluid control. 3. High opacity 4. Excellent light fastness (contains UV

inhibitors). 5. Even when the cap is left off, the tip can be

re-primed, so you can use all the liquid inside the marker.

6. Replaceable nibs available in four different styles.

7. Compatible with all types of finishes. 8. Seal, stain and finish in one application.

Use With: Ultra™ Mark Markers can be used as a stand-alone product, but we recommend that you apply a top-coat, to obtain maximum durability

Alternative Products: Pro-Mark™ Marker

Background Marker

Blendal® Stick

Blendal® Powder

Available as:

Individual colours (blister pack)



Fil-Stik™ Putty Stick/Ultra™ Mark Marker Combo Kit

Individual Colours Available: M280-0001 Extra Dark Walnut/Sm Hazelnut M280-3272 Mark Frost

Individual Colours Available in Blister Packs: M280-1522B Statesman Oak #2 M280-0415B Light Golden Oak M280-0408B Cherry BG M280-0227B Dark Red Mahogany #2 M280-0221B Honey/Caramel M280-0218B Light Red Mahogany M280-0209B Extra Dark Walnut #2 M280-0202B White M280-0143B Raw Umber M280-0236B Brown Maple See over for assortment contents.

Replacement Nibs: M264-1004 Chisel Point (24 per pack)

M264-1007 Bullet Point (24 per pack)


12 Pack Assortment Contents:

M280-0143 Raw Umber

M280-0202 White

M280-0209 Extra Dark Walnut #2

M280-0218 L t. Red Mahogany

M280-0221 Honey/Carmel

M280-0224 Black #2

M280-0227 Dk. Rd. Mahogany #2

M280-0236 Brown Maple

M280-0408 Cherry BG

M280-0411 Nutmeg

M280-0415 Lt. Golden Oak

M280-1522 Statesman Oak #2


24 Pack Assortment Contents:


M280-0002 Black

M280-0004 Cherry

M280-0012 Traditional Cherry


M280-0022 Rich Cherry

M280-0024 Pine

M280-0031 Antique White

M280-0200 Natural Lt. Oak

M280-0202 White

M280-0205 Medium Walnut

M280-0209 Extra Dark Walnut #2

M280-0224 Black #2

M280-0227 Dk. Rd. Mahogany #2

M280-0229 Brown Mahogany

M280-0234 Medium Dark Walnut

M280-0236 Brown Maple

M280-0249 Perfect Brown

M280-0391 Universal Cherry

M280-0408 Cherry BG

M280-0411 Nutmeg


M281-0057 Bay

M282-3653 Cognac

Background Marker

Mohawk's Background Markers dispense a thin, fast drying, low sheen film, which can be used to replace background colour over repairs, such as fills or glue lines, or to mask areas of discolouration, such as stains or dark areas in raw wood. Background Markers are indispensible for touch-ups on MDF, particleboard, and other very absorbent substrates that tend darken when other types of markers are applied.

Colorant: Pigment


Opacity: Very high

Uses: 1. Colour over repairs e.g. glue lines, fillers, putties and burn-ins. 2. Re-colour edges, scratches and sand throughs on highly absorbent materials, such as MDF or particleboard, which tend to darken with other types of markers. 3. Mask areas of discolouration, such as stains or dark areas in raw wood.

Advantages: 1. Easy to use. 2. Very high opacity. 3. Pigment-based colour with excellent light fastness. 4. Compliments many stain colours. 5. Good adhesion to repairs. 6. Valve activated nib: even when the cap is left off, the tip can be re-primed, so you can use all the liquid inside the marker. 7. Replaceable nib. 8. Colour band on markers to aid in indentifying correct colours.

Use With: Background Markers can be used as a stand-alone product, but we recommend that you apply a top-coat, to obtain maximum durability

Alternative Products:


Blendal® Stick

Blendal® Powder

Available as:

M294-5012 12 Assortment

Assortment Contents: M294-5000 Natural M294-5001 Champagne M294-5002 Dark Walnut/Dark Glaze M294-5003 Medium Oak M294-5004 Light Walnut M294-5005 Mahogany M294-5006 Cherry M294-5007 Georgian Leather M294-5008 Sweet Maple M294-5009 Oatmeal Maple M294-5010 Light Golden Oak M294-5011 Black

Replacement Nibs:

M290-1001 Acrylic Chisel Point (12 per pack)

M290-1002 Acrylic Bullet Point (12 per pack)

M290-1003 Polyester Bullet/Chisel Point Dual End, High Flow (12 per pack)

M290-1004 Acrylic Brush/Chisel Point (12 per pack)


Background Marker Glaze Hang-Up Dispenses a thin, highly opaque, fast drying glaze.

Colorant: Pigment


Opacity: Very high

Uses: 1. Touching up hang-up areas of repairs.

Advantages: 1. Easy to use. 2. Very high opacity. 3. Fast drying

Use With: We recommend that you apply a top-coat, to obtain maximum durability.

Available as:

M293-4001B Ebony/Black

M293-4002B Deep Brown

M293-4003B Sable/Ginger

M293-4004B Brown Glaze


Quik-Tip ™ Marker Mohawk’s “Quik-Tip” Marker applies a durable finish, solid color touch-up and repair in one easy operations. This product provides excellent adhesion and wear.

Colorant: Pigment


Opacity: High

Uses: 1. Recolor worn edges, minor surface and edge marks

Advantages: 1. Solid color touch-up 2. High solids 3. Quick drying 4. Excellent adhesion 5. Durable finish no top coat needed

Use With: Can be used as a stand alone product

Available as individual colours:

M290-0001 Transparent Water Clear

M290-0006 346 Silverado

M290-0202 High Gloss White

M290-0203 Flat White

M290-0224 High Gloss Black

M290-2286 Satin White Uc

M290-2285 Matte White Uc

M290-2287 Matte Cream Uc

M290-0879 Gloss White Uc

Replacement Nibs (suitable for M290, M293 and M294 markers):

M290-1001 Acrylic Chisel Point (12 per pack)

M290-1002 Acrylic Bullet Point (12 per pack)

M290-1003 Polyester Bullet/Chisel Point Dual End, High Flow (12 per pack)

M290-1004 Acrylic Brush/Chisel Point (12 per pack)

Accent Pencils

Accent Pencils are an easy to use tool for applying colour or grain lines to a filler or a sand through area. They can also be used to apply colour to light cut through edges.

Colorant: Pigment

Application method: Pencil

Opacity: Medium

Uses: i. Accent Pencils can be used on small spot

repairs to: ii. Create foreground colour. iii. Add grain lines, distressing, mineral

streaks, cow tailing.

Advantages: 1. Fast and easy to use. 2. Superior blending and shading. 3. Smooth colour lay down. 4. Will not bleed when top-coated.

Use with: A protective coating must be sprayed over the area after applying. We recommend using the Mohawk top-coat of your choice



Graining Pencils

Blendal® Sticks

Blendal® Powder

Available as:

M271-7000: 7 Pack Assortment

7 Pack Contents: M271-1000 Black M271-1001 Brown M271-1002 Red Brown M271-1003 True Brown M271-1004 Fruitwood M271-1005 Cherry M271-1007 Dark Umber


Blendal® Sticks

Blendal® Sticks, created using the same extra fine ground pigments in Mohawks popular Blendal® Powder Stains, are a convenient way to add or alter colour when repairing wood. Blendal® Sticks allow you to quickly and accurately replace colour on raw or finished edges and flat surfaces. You can easily blend the colours to accomplish a perfect match.

Colorant: Pigment

Application method: Stick

Opacity: High

Uses: 1. To add or alter colour when repairing or

touching up wood. 2. To add grain lines.

Advantages: 1. Fade resistant, non-bleeding permanent

colours. 2. Ultra fine ground pigments for maximum

colour yield. 3. Colours transfer and blend easily on the

surface without attacking the finish. 4. The stick can be sharpened for fine detail or

graining (a sharpener is included in each assortment).

5. Can be top-coated immediately. 6. Multiple colours can be blended to obtain a

perfect colour match.

Use With:

Tone Finish Flat Easy Sanding Sealer.

A protective coating must be applied. We recommend using the Mohawk top-coat of your choice



Accent Pencil

Blendal® Powder

Available as:

Individual colours




Individual Colours Available: M340-0038 Autumn Cherry M340-0035 Dark Walnut M340-0031 Toffee M340-0017 Cayenne M340-0011 White M340-0010 Black M340-0003 Burnt Umber M340-0006 True Brown M340-0007 Burnt Sienna M340-0013 Rock Maple M340-0023 Natural Maple M340-0039 Cherry Glaze

See over for assortment contents.


12 Pack Assortment #1:

M340-0000 Raw Sienna

M340-0001 Ginger Brown

M340-0002 Harvest Brown

M340-0003 Burnt Umber


M340-0005 Raw Umber

M340-0006 True Brown

M340-0007 Burnt Sienna

M340-0008 Mahogany

M340-0009 Cordovan

M340-0010 Black

M340-0011 White


M340-0029 Moss Glaze


M340-0031 Toffee

M340-0032 Irish Crème Glaze


M340-0034 Red Brown Mahogany

M340-0035 Dark Walnut


M340-0037 Caramel

M340-0038 Autumn Cherry

M340-0039 Cherry Glaze

M340-0040 Mocha

36 Pack Assortment:

M340-0000 Raw Sienna

M340-0001 Ginger Brown

M340-0002 Harvest Brown



M340-0005 Raw Umber

M340-0006 True Brown


M340-0008 Mahogany

M340-0009 Cordovan

M340-0010 Black

M340-0011 White

M340-0012 Beige Tone

M340-0013 Rock Maple

M340-0015 Wheat

M340-0016 Cinnamon

M340-0017 Cayenne

M340-0019 Natural Oak




M340-0024 Pale Gold

M340-0027 Silver

M340-0028 Rust

M340-0029 Moss Glaze


M340-0031 Toffee

M340-0032 Irish Crème Glaze


M340-0034 Red Brown Mahogany

M340-0035 Dark Walnut


M340-0037 Caramel

M340-0038 Autumn Cherry

M340-0039 Cherry Glaze

M340-0040 Mocha


Blendal® Powder Stain

Blendal® Powder Stains are ultra fine ground pigments that can be blended to accurately replace colour on all types of furniture. Blendal® Powder Stains can be combined with Wil Pro™ Padding Finish, Finish-Up™ Polyurethane or clear aerosol finishes to repair colour defects without removing the original finish.

Colorant: Pigment

Application method: Brush application or padding

Opacity: Depends the ratio of powder to medium used

Uses: 1. Spot colour replacement on all types of

furniture, including: timber furniture, cabinets, plastics, leather, and vinyl.

2. Tinting clear coatings.

Advantages: 1. Compatible with many finishes. 2. Easy to use. 3. Pre colour matched. 4. Very lightfast. 5. Can be blended to accurately match any

surface colour. 6. Can be applied with a brush or padding pad.

Use With:


Wil Pro™ Padding Finish

Finish-Up™ Polyurethane

Tone Finish Flat Easy Sanding Sealer.

Tone Finish® Clears

Blendal Powder Stains are compatible with various other mediums, including: padding agents, "French Polish", lacquer, shellac, varnish, synthetic finishes and graining liquids.



Blendal® Stick

Accent Pencil

Available as:

M370-1200 12 Pack Assortment (1oz/29 gm pots)

12 Pack Assortment Contents: M370-2021 White M370-2031 Canary Yellow M370-2241 Black M370-2421 Red M370-3481 Ochre Yellow M370-3681 Dark Burnt Umber M370-4141 Blue M370-4761 Burnt Sienna M370-4771 Raw Sienna M370-01431 Raw Umber M370-14351 Burnt Umber M370-14781Van Dyke Brown


Ultra Classic™ Toner

Mohawk Ultra Classic™ Toners have proven themselves very successful throughout the Touch-up industry where extreme transparency and clarity is required. Fade resistant and non-bleeding dyes are used for the entire colour line. These toners can be used to make small touch-up repairs or to shade and tone an entire article, without imparting the “muddy” effect sometimes associated with pigment type toners. Use the appropriate clear lacquer aerosol if the sheen level needs adjustment.

Colorant: Dye




Uses: 1. To correct colour irregularities in timber

finishes. 2. To correct colour irregularities in colour

touch-ups.

Advantages:

1. Hap’s compliant.

2. Aerosol form, no extra equipment needed.

3. Feathers in invisibly to provide seamless touch-up repairs.

4. Available in a wide variety of wood finishing shades.

5. Excellent transparency.

6. Excellent flow out.

7. No overspray.

8. Mar and alcohol resistant.

Use With: For best results seal and top-coat with an appropriate Mohawk product

Available as:

Individual colours


Individual colours: M100-0207 Medium Brown Walnut

Assortment Contents: M100-0002 Natural Pine M100-0207 Medium Brown Walnut M100-0209 Extra Dark Walnut M100-0227 Dark Red Mahogany M100-0229 Brown Mahogany M100-0321 Light Oak/Natural M100-0351 Dark Walnut/Oak M100-0352 Light Walnut/Colonial Maple M100-0355 Medium Oak/Tavern Pine M100-0384 Deep Red Mahogany M100-0408 Cherry M100-7020 Dark Walnut


Tone Finish Toner

Finely ground, non-fading pigments for colour repairs that last. Available in a wide variety of wood finishing shades. Used throughout the industry for quick efficient professional touch-up. Adapts to various methods so as to blend in spot repairs. Adjustment of sheen is achieved with a top-coat of clear lacquers available in gloss, satin, flat and dead flat.

Colorant: Pigment


Opacity: Low opacity


Uses: 1. To recolour spot repairs.

Advantages:

1. Hap’s compliant.

2. Aerosol form, no extra equipment needed.

3. Feathers in invisibly to provide seamless touch-up repairs.

4. Available in a wide variety of wood finishing shades.

Use With: For best results seal and top-coat with an appropriate Mohawk product.

Assortment Contents: M101-0229 Brown Mahogany M101-0143 Raw Umber M101-0205 Medium Walnut M101-0206 Light Walnut M101-0209 Extra Dark Walnut M101-0218 Light Red Mahogany M101-0222 Blonde M101-0227 Dark Red Mahogany M101-0234 Medium Dark Walnut M101-0249 Perfect Brown M101-0326 Amber M101-0353 Dark Van Dyke Brown


Block-It™ Toner

Mohawk’s Block-It™ Toner harnesses advanced colour technology to allow you to adjust colour irregularities in timber. Block-It™ Toners can be applied directly over the existing finish, allowing you to correct irregularities without stripping or refinishing the piece.

Colorant: Ultra fine pigment





finishes, such as: a) problems of redness, darkness or

shading; or b) to warm up, cool down or

neutralise the colour of a finish.

Advantages:

1. Permanent transparent coloured lacquer coatings.

2. Colour harmony and enhanced colour tone can be achieved by using Block-It™ Toners. Orange will warm up cold colours, green and blue will neutralize red to produce brown shades.

3. Use of the basic principle of complimentary or supplementary colours and the interaction of light produces the desired effect.

Use With: Can be used as a stand alone product.

Available Colours:

M103-7001 Blue

M103-7002 Green

M103-7003 Orange

M103-7004 Transparent Orange


Shadow Toner

Easily add colour to a repair or a finishing project by using Mohawk's new Shadow Toner. The Shadow Toner is made with micro fine, non fading pigments and high quality lacquer. This aerosol will add colour to your project without a muddy appearance. Apply Shadow Toner to your project to correct the colour or add colour to help hide a repair. Adjustment of sheen is achieved with a clear top-coat lacquer.

Colorant: Micro fine pigment


Opacity: Semi-transparent



finishes. 2. To add colour to touch-ups.

Advantages:

1. Superior flow-out

2. Subtle blending

3. Good clarity

4. No overlap marks

5. Fine atomisation of colour.


Available Colours:

M108-1000 Black

M108-1001 Blue

M108-1002 Green

M108-1003 Orange

M108-1004 Transparent Orange


Graining

Brush Tip Graining Marker......page 42

Graining Pencils......page 44

Ultra® Fine Grainer......page 44



The Brush Tip Graining Marker is the perfect colour tool for service technicians. This revolutionary marker features a micro brush tip that allows you to apply colour exactly where it is needed without any messy powders, fluids or odours. Brush Tip Graining Markers come ready to use. Simply stroke or dot on colour where it's needed. To soften or blend the colour, tap the colour while it is wet with a clean cloth. This is simply the easiest marker that you will ever use!

Colorant: Dye

Application method: Brush tip marker


Uses: 1. Add grain lines to repairs. 2. Add colour to small sand throughs, defects or repairs. 3. To alter the colour of a Fil-Stik Putty Stick, Quick Fill Burn-In Stick, or E-Z Flow Burn-In Stick.

Advantages: 1. Micro brush tip applicator. 2. Complete 24 colour palette. 3. Clear crisp colours that hold a thin line. 4. Low to no odour. 5. Easy to use, teach and learn. 6. Quick and easy application, no messy powders, extra brushes or liquids.

Use With: Brush Tip Graining Markers can be used as a stand-alone product, but we recommend that you apply a top-coat, to obtain maximum durability


Graining Pencils

Accent Pencils

Blendal® Sticks

Blendal® Powder Stain

Available as:

Individual Colours





Individual Colours Available: M265-2000 Raw Umber

See over for assortment contents.



M265-2000 Raw Umber

M265-2001 Dark Cherry


M265-2003 Dark Perfect Brown


M265-2005 Black


M265-2006 Light Oak


M265-2008 Dark Brown Mahogany



M265-2011 Deep Brown Mahogany


M265-2012 Ash Tone

M265-2013 Honey Maple Tone

M265-2014 Warm Brown Walnut Tone

M265-2015 Golden Oak Tone

M265-2016 Deep Cordovan

M265-2017 Natural Light Oak Tone


M265-2018 Warm Oak Tone

M265-2019 Maple Glaze Tone

M265-2020 Medium Dark Oak Tone

M265-2021 Light Golden Oak Tone

M265-2022 Nutmeg Tone

M265-2023 Antique Maple Tone


Graining Pencils The graining pencil is an artist pencil with soft, thick cores to create a smooth colour lay down for superior blending and shading. The pencils can be used to add colour or grain lines over raw wood, finished wood, and Mohawk Epoxy Sticks. The colour of the pencils will not bleed or change when top-coated. Recommended on production line touch-up stations since colour can be replaced along moving line.

Colorant: Pigment

Application method: Pencil

Opacity: Medium

Uses: 1. Add colour 2. Add grain lines

Advantages: 1. Fast and easy to use. The absence of liquid eliminates

drying time. 2. Superior blending and shading. 3. Smooth colour lay down. 4. Will not bleed when top-coated.

Use with: We recommend that you apply a top-coat, to obtain maximum durability

Alternative Products: Brush Tip Graining Markers Accent Pencils Blendal® Sticks Blendal® Powder

Available as:


14 Pack Contents:

M270-0901 Graining Pencil Warm Grey

M270-0902 Graining Pencil French Grey 70%

M270-0903 Graining Pencil French Grey 90%

M270-0904 Graining Pencil Sandbar Brown

M270-0905 Graining Pencil Black

M270-0941 Graining Pencil Light Umber

M270-0943 Graining Pencil Burnt Ochre

M270-0945 Graining Pencil Brown Sienna

M270-0946 Graining Pencil Dark Brown

M270-0947 Graining Pencil Dark Umber

M270-0948 Graining Pencil Sepia

M270-0997 Graining Pencil Beige

M270-1034 Graining Pencil Goldenrod (oak)

M270-4030 Graining Pencil Raspberry (mahogany)


Ultra® Fine Grainer Mohawk Ultra® Fine Grainer. The best choice for replacing grain and distressing marks over spot repairs on all types of furniture and cabinets.

Colorant: Pigment

Application method: Pen

Opacity: High

Uses: 1. Add fine grain lines

Advantages: 1. New nib design with continuous flow 2. Produces extra fine grain lines 3. Quick drying permanent inks 4. Easier than brush application 5. Top coat with any Mohawk finish

Use with: We recommend that you apply a topcoat, to obtain maximum durability

Alternative Products: Brush Tip Graining Markers Graining Pencils Accent Pencils Blendal® Sticks Blendal® Powder

Available as individual colours:

M265-0101 Light Oak Gp9

M265-0301 Medium Brown Gp8

M265-0401 Dark Brown Gp7

M265-0501 Black Gp6

Sanding Sealers

E-Z Vinyl® Sealer Aerosol......page 46

Pre-Catalysed Sanding Sealer......page 47

Tone Finish Flat Easy Sanding Sealer......page 48


E-Z Vinyl® Sealer Aerosol

E-Z Vinyl® Sealer aerosol is the perfect choice for spot repairs on kitchen cabinetry, furniture or millwork where improved durability, moisture resistance and adhesion are critical. E-Z Vinyl® Sealer aerosol is a water clear, quick build sealer that’s specifically designed for surface preparation under mid to high sheen finishes. E-Z Vinyl® Sealer aerosol sprays with good atomization and flow, and provides a flexible, moisture resistant surface when applied under all Mohawk aerosol clear top-coats, especially the pre-catalysed aerosol lacquers.

Characteristics: Stearate free

Sheen range: 42-46

Resin System: Nitro / Alkyd / Vinyl

Application method: Aerosol Spray

Solid WT% (w/o gas): 11.4



Uses: 1. Surface preparation for spot repairs on kitchen cabinetry, furniture or millwork where improved durability, moisture resistance, and adhesion are critical. 2. Surface preparation under mid to higher sheen finishes.

Advantages: 1. Suitable for use under any Mohawk Aerosol top-coat. 2. Flexible. 3. Moisture resistant. 4. Non-stearated formula (provides better adhesion and reduces the risk

of the finish peeling). 5. Water clear. 6. Quick build. 7. 42-46 degree sheen.

Use with: Ultra-Flo Ultra® Bond Clear Pre-Catalysed Clears


Pre-Catalysed Sanding Sealer

Mohawk Pre-Catalysed Sanding Sealer excels in flow out, adhesion and hold out. Fast drying, resistant to yellowing and leaves no halo on spot repairs. Recommended for use under Pre-Catalysed Clears, and C.A.B. Topcoats.

Characteristics: Stearate free

Sheen range: 0-15

Resin System: Nitro / Alkyd / Urea





Uses: 1. To seal spot repairs in preparation for top-coating. 2. For use under Pre-Catalysed Clears, and C.A.B. Topcoats

Advantages: 1. Excellent atomization and flow out. 2. Excellent adhesion and hold out. 3. Fast dry, leaves no halo on spot repairs. 4. Resistant to yellowing.

Use with: Pre-Catalysed Clears

Alternative products: E-Z Vinyl® Sealer Aerosol


Tone Finish Flat Easy Sanding Sealer

Mohawk Flat Easy Sanding Sealer helps to fill the timber grain in preparation for the final finish, producing a smooth, even finish. It was designed for use in conjunction with flat and dead flat final finishes, but it is also suitable for use under gloss finishes.

Characteristics: Stearated

Sheen range: 38-42

Resin System: Nitro / Ester Gum





Uses: 1. To seal spot repairs in preparation for top-coating. 2. To seal Blendal Powders.

Advantages: 1. HAP’s compliant. 2. Aerosol form – no extra equipment needed. 3. Does not exceed 95% VOC 4. Gives very good clarity considering its low gloss. 5. Provides for easy sanding.

Use with: Tone Finish® Clears


Clears



Finish-Up™ Polyurethane......page 52

Tone Finish® Clears......page 53

Ultra-Flo Ultra® Bond Clear......page 54

Pre-Catalysed Clears......page 55


Perfect Blend ™ Waterborne......page 57

Clear Spray Shellac......page 58

Wil Pro™ Padding Finish......page 59

Waterborne Pre-Catalysed Lacquer......page 60

Finisher’s Choice Clear Lacquer......page 61

Waterborne Brushing Urethane......page 62

Classic Instrument Lacquer......page 62


Ultra™ Bond Waterborne Clear Finish Marker

Mohawk Ultra™ Bond Waterborne Clear Finish Marker produces a durable, chemical resistant, water clear finish for use on flooring, cabinets, furniture and many other surfaces. Has excellent adhesion on most hard to adhere to finishes such as urethane, UV and aluminium oxide. A truly multi-purpose top-coat for those small repairs and finishing needs.

Finish Type: Water base

Curing type: Coalescing

Resin System: acrylic/urethane


Can be used with: Fil-Stik™ Putty Stick Quick Fill™ Burn-In Stick Pro-Mark™ Marker Ultra™ Mark Marker Hard Fill and Hard Fill Plus And many more Mohawk repair products

Uses: 1. Topcoat to protect repairs and touch-ups.

Advantages: 1. Easy to use. 2. Excellent adhesion. 3. Durable, resistant water clear finish. 4. Multi-purpose top-coat for small repairs. 5. Low odour. 6. Fast drying. 7. Blends well into the surrounding area,

providing a nearly invisible repair.

Product Number Sheen Sheen Range Solids (Wt. %)

M292-0020 Matt 25 28.7

M292-0040 Satin 40 28.7

M292-0060 Semi-Gloss 60 27.86

M292-0080 Gloss 80+ 27.2

Available sheens:


Blend-Its

A clear liquid filler and top-coat used to repair minor surface scratches, replace finish and to lock in other types of repair work. Adheres to most materials or finishes. Fast drying Blend-Its can be used on all finishes without fear of damaging the finish. Each jar comes with a brush attached to the cap for quick and easy application.

Finish Type: Liquid filler and top-coat

Curing type: Evaporative / Coalescing (waterborne)

Resin System: alkyd / acrylic

Application method: Brush

Solid WT%: 24.48

Volume: 0.5oz/15ml

Uses: 1. To repair minor surface scratches. 2. To replace finish. To lock in other types of repair work.

Advantages: 1. Fast drying. 2. Blend-Its can be used on all finishes without fear of damaging the finish. 3. Each jar comes with a brush attached to the cap for quick and easy application.

Product Number Sheen Solids (Wt. %) w/o gas

M450-0003 Flat 26.16

M450-0002 Satin 25.08

M450-0001 Gloss 24.48

M450-0005 Blend-IT Water Clear Touch Up 12.27

Available sheens:


Finish-Up™ Polyurethane A user-friendly wipe on finish, Finish-Up™ Polyurethane can be applied over repairs such as Burn-Ins, Fil-Stick Putty Stick fills, Blendal Powders and Touch Up Markers to seal the repair, and leave a durable protective finish. Finish-Up™ can also be applied over old finishes to improve their appearance and durability. Finish-Up™ adheres well to most types of lacquers, vinyl clads, and high pressure laminates, as well as many other substrates. Best of all, it is water based and has almost no odour, making Finish-Up™ Polyurethane the product of choice where aerosols and other solvent based touch-up finishes are not appropriate.



Resin System: Acrylic / Polyurethane

Application method: Wipe-on

Volume: 473ml or 946ml

Advantages: 1. Non-flammable. 2. Easy to use. 3. Will not lift other finishes. 4. Easy wipe on application. 5. Good flow characteristics. 6. Moisture & alcohol resistant. 7. Excellent adhesion. 8. Quick drying. 9. Good durability. 10.Water clear. 11.Water based. 12.Low odour. 13.Low VOC. 14.Non-flammable.

Uses: 1. As a top-coat 2. To seal repairs 3. To improve appearance and durability of old

finishes 4. As a medium for Blendal Powders.

Can be used with: Blendal Powders Touch Up Markers Mohawk fillers

Alternative products: Perfect Blend ™ Waterborne Ultra™ Bond Waterborne Clear Finish

Marker

Product Number Volume Sheen Sheen Range Solids (Wt. %)

w/o gas

M603-4405 473ml Flat 10-15 19.1

M603-4205 473ml Satin 45-50 19.7

M603-4105 473ml Gloss 80+ 20.0

M603-4406 946ml Flat 10-15 19.1

M603-4206 946ml Satin 45-50 19.7

M603-4106 946ml Gloss 80+ 20.0

Available sheens:


Tone Finish® Clears

Mohawk’s best selling aerosol lacquer, these clear, nitrocellulose based lacquers are recommended as top-coats for wood finishes and furniture repairs. The choice of five different sheens, and excellent flow and blend-in properties, make Tone Finish® Clears the perfect choice for repairs.

Finish Type: Lacquer

Curing type: Evaporative

Resin System: Nitro / Alkyd



Use with: Tone Finish Flat Easy Sanding Sealer

Alternative products: Pre-Catalysed Clears Ultra-Flo Ultra® Bond Clear Finish-Up™ Polyurethane Perfect Blend™

Uses: 1. Topcoat to protect repairs and touch-ups. 2. Topcoat for finishing small pieces.

Advantages: 1. Easy to use. 2. Blush resistant. 3. Excellent blend-in properties. 4. Good cold check resistance. 5. Excellent print and mar resistance.

Product Number Sheen Sheen Range Solids (Wt. %) w/o

gas

M102-0485 Dead Flat 3-6 9.6

M102-0421 Flat 10-15 10.6

M102-0422 Satin 30-35 10.9

M102-0419 Semi-Gloss 50-55 10.4

M102-0420 Gloss 80+ 10.7

Available sheens:


Ultra-Flo Ultra® Bond Clear

Ultra-Flo™ Ultra Bond Clears are specially formulated to adhere to and flow out over hard to coat surfaces such as UV cure, two-component, polyester and other finishes.



Resin System: Nitro / Alkyd / Polyketone



Use with: E-Z Vinyl® Sealer Aerosol

Alternative products: Ultra™ Bond Waterborne Clear Finish

Marker Pre-Catalysed Clears Finish-Up™ Polyurethane


Advantages: 1. Provides superior adhesion and flow. 2. HAP’s compliant. 3. MIR compliant. 4. Excellent blend-in properties. 5. Available in four sheens.


gas

M102-0553 Flat 23-27 11.9

M102-0552 Satin 38-42 11.9

M102-0551 Semi-Gloss 58-62 11.8

M102-0550 Gloss 80+ 11.6

Available sheens:


Pre-Catalysed Clears

Mohawk Pre-Catalysed Clears offer the durability of a pre-catalysed lacquer with the ease of aerosol application. The dry film is very durable and adheres where other finishes will not. Pre-Catalysed Clears have been tested and approved for in factory as well as onsite touch-up on catalysed finishes.

Finish Type: Pre-Catalysed Lacquer

Curing type: Reactive

Resin System: Nitro / Alkyd / Urea



Use with: Pre-Catalysed Clear Finish Sealer , or E-Z Vinyl® Sealer Aerosol

Alternative products: Ultra-Flo Ultra® Bond Clear. Finish-Up™ Polyurethane


Advantages: 1. Excellent atomization. 2. Excellent adhesion. 3. Very good clarity and durability.


gas

M102-0414 Dead Flat 3-5 12.8

M102-0411 Flat 8-12 12.5

M102-0416 Matte 20-25 12.2

M102-0412 Satin 35-40 11.9

M102-0415 Semi-Gloss 60-65 11.8

M102-0410 Gloss 75+ 11.5

Available sheens:


Perfect Blend™ Perfect Blend™ aerosol is a premium blended nitrocellulose lacquer formulated to produce a soft spray and fine atomisation resulting in virtually no overspray, little bounce and excellent flow. Perfect Blend™ is perfect for touch-up. The soft spray coupled with low solids gives Perfect Blend™ superior blending properties, allowing you to perform touch-ups without worrying about creating a halo effect. Perfect Blend™ also offers excellent adhesion, even over waxed and polished surfaces and areas contaminated with silicone, but does not adhere to most metals and plastics.



Resin System: Nitro


Net contents: 13.5oz/383gm

Use with: Tone Finish Flat Easy Sanding Sealer

Alternative products: Tone Finish® Clears Perfect Blend™ Waterborne


Advantages: 1. Easy to use. 2. Soft spray and fine atomization. 3. Excellent blend-in properties. 4. Excellent adhesion. 5. Premium packaging.


gas

M102-0705 Dead Flat 5-8 6.60

M102-0710 Flat 10-13 6.60

M102-0720 Matte 19-23 6.60

M102-0740 Satin 35-40 6.60

M102-0760 Semi-Gloss 55-65 6.60

M102-0780 Gloss 80 6.60

Available sheens:


Perfect Blend™ Waterborne Perfect Blend™ Waterborne is a premium, fast-drying, very low odour, water-based acrylic lacquer perfect for touch-ups. It displays excellent adhesion over waxed and polished surfaces and areas contaminated with silicone. Water Based Perfect Blend™ features a soft spray, low film build, and fine atomisation resulting in virtually no overspray, little bounce, good flow, and a strong ability to blend in with the surrounding surface. Ideal for situations where odour may be an issue, such as restaurants, offices, homes and hotels.



Resin System: Acrylic


Net contents: 13.5oz/383gm

Alternative products: Finish-Up™ Polyurethane Perfect Blend™ Ultra™ Bond Waterborne Clear Finish Marker


Advantages: 1. Soft spray and fine atomization. 2. Virtually no overspray, little bounce and

excellent flow out. 3. Superior blend with surrounding area, no

halo effect touch-up. 4. Excellent adhesion over waxed and polished

surfaces. 5. Very low odour. 6. HAP free.


gas

M102-0614 Flat 10-13 7.84

M102-0613 Matte 19-23 7.84

M102-0612 Satin 35-40 7.84

M102-0611 Semi-Gloss 55-65 7.84

M102-0610 Gloss 80 7.84

Available sheens:


Clear Spray Shellac

Clear Spray Shellac is pure shellac. Shellac has unusually good adhesion to hard-to-grip surfaces and exceptional hold out on wood, plywood, and plaster. This versatile product can be used as a clear coating, sealer, barrier coat or tie coat. It can also be used on copper and aluminium screening, arts and crafts projects, string design, etc.

Finish Type: Shellac


Resin System: Shellac




Uses: 1. As a clear coating on furniture, floors, inside drawers and food cabinets 2. As a sealer over porous surfaces, such as worn areas, knots, refill areas

etc. 3. As a barrier coat over silicone-contaminated areas. 4. As a tie coat to provide adhesion between hard-to-grip surfaces and

the final finish.

Advantages: 1. Easy to use. 2. Clear Gloss finish. 3. Quick drying. 4. Good adhesion to many surfaces. 5. Versatile.


Wil Pro™ Padding Finish

Wil Pro™ Padding Finish is formulated especially for the professional touch-up artist, making it the first choice of experts. Not only is it one of our Mohawk’s most popular French finishes, it also makes the perfect medium for Blendal® Powder Stains. Its performance is particularly impressive where clarity and minimum build-up are critical.

Finish Type: Shellac


Resin System: Shellac

Application method: Padding

Solid WT%: 7.46


Volume: 946ml

Uses: 1. French polishing. 2. As a medium for Blendal® Powder Stains 3. For removing packing marks and mars on fine furniture.

Advantages: 1. Super fast-dry. 2. Very low build-up. 3. Excellent clarity. 4. No discoloration on light finishes. 5. The best for French polishing. 6. Lowest build-up of any French finish on the market. 7. May be coated with lacquer immediately. 8. Ready to use; no oil or additives are required. 9. Very print resistant. 10. May be used on the very lightest of finishes with no discoloration.


Waterborne Pre-Catalysed Lacquer

Mohawk’s Waterborne Pre-Catalysed Lacquer is a water reducible, self cross-linking, low VOC emitting technology that has good colour retention and is suitable for cabinet, millwork, furniture and other high traffic interior wooden surfaces. Waterborne Pre-Catalysed Lacquer passes KCMA tests with as little as two coats and can be used as a self sealing system. Waterborne Pre-Catalysed Lacquer is formulated to meet production shop needs and is an excellent environmentally friendly alternative to comparable solvent based pre-catalysed products. Waterborne Pre-Catalysed Lacquer may be applied over any Mohawk stain. Note: allow oil type stains to dry a minimum of one hour for improved adhesion. Waterborne Pre-Catalysed Lacquer containers resist rusting and improve the product’s shelf life.

Finish Type: Waterborne Pre-Catalysed Lacquer

Curing type: Reactive

Application method: Spray application

Net volume: 1 gallon/3.78 litre or 5 gallon/11.34 litre

Uses: 1. Finishing.

Advantages: 1. Certified as a waterborne system (USA GREENGARD®). 2. Contains no formaldehyde, phthalates or lead. 3. Low odour. 4. Water clean up. 5. Low emissions.

Available sheens:

AVAILABLE ON INDENT ONLY

Product Number 1 Gallon


Sheen Sheen Range Solids (Wt. %)

M640-24007 M640-24008 Sealer n/a 35.16

M640-24207 M640-24208 Matte 20 35.08 - 35.73

M640-24407 n/a Satin 40 35.08 - 35.73

M640-24607 M640-24608 Semi-Gloss 60 35.08 - 35.73

M640-24807 M640-24808 Gloss 80 35.08 - 35.73


Finisher's Choice™ Clear Lacquer

Finisher's Choice™ Clear Lacquers have always been trusted for high quality results. These lacquers are Mohawk’s best selling and easiest to use nitrocellulose formulation and perfect for applying to interior wooden surfaces. Mohawk’s unique formulas are shipped at spray viscosity to help you save time and money by getting the build you need with less application. Solids: 20%.

Finish Type: Nitrocellulose



Net volume: 1 gallon/3.78 litre or 5 gallon/11.34 litre

Uses: 1. Finishing.

Advantages: 1. Quick dry 2. Easy to touch up 3. Excellent flow out 4. Ready to spray viscosity 5. 275 VOC compliant 6. Alcohol resistant 7. Good drying and levelling properties 8. Excellent rubbing and polishing characteristics 9. Good cold check resistance 10.Hard, durable finish that provides years of service under normal

conditions of use

Available sheens:



Sheen Sheen Range Solids (Wt. %)

M612-25007* M612-25008* Sealer n/a 20.48

M612-25107* M612-25108* Flat 10 20.14

M612-25207* M612-25208* Matt 20 20.14

M612-25407* M612-25408* Satin 40 20.14

M612-25607* M612-25608* Semi-Gloss 60 20.14

M612-25807 M612-25808* Gloss 80 20.14

*AVAILABLE ON INDENT ONLY


Classic Instrument Lacquer A high quality Nitrocellulose Wood Lacquer for musical instruments providing unique depth of gloss, superior colour and gloss retention, adhesion, and exceptional cold check resistance . Formulated to produce a superior finish on thin, flexible veneers such as those used on stringed musical instruments. Excellent flow, flexibility and durability. Superior rubbing qualities yield a mirror-like reflectance. Supplied ready to spray.

Finish Type: Nitrocellulose



Solid WT%: 18.27

Sheen: Gloss 90

Available sizes: 1. M610-1406 1 quart/ 946ml 2. M610-1407 1 gallon/3.78 litre

Uses: 1. Finishing musical instruments

Advantages: 1. Easy to use, no reduction necessary 2. Good spray flow levelling properties 3. Alcohol and scuff resistant finish 4. Excellent rubbing and polishing characteristics 5. Minimum shrinkage on aging 6. Superior cold check resistance (cracking) – passes 20 cold check cycles on 1/8”

plywood, 5 coats 7. Hard, wear resistant finish that will show improved appearance on aging


Waterborne Brushing Urethane Waterborne Brushing Urethane is a high quality, non-yellowing acrylic/urethane top coat that provides a beautiful finish that will enhance the beauty of your wood projects. Waterborne Brushing Urethane is low odor, fast drying and low VOC. It is easy to apply and has excellent leveling properties. It is a high solids, self-sealing finish that provides faster build with fewer coats for superior results.

Finish Type: Waterborne acrylic/urethane


Application method: Brush or spray application

Net volume: 1 quart/946 ml

Uses: 1. Finishing.

Advantages: 1. 275 VOC 2. Meets KCMA requirements 3. Water clean up 4. Low odour 5. Easy to use 6. Dries quickly 7. Excellent leveling properties 8. Perfect for on-site application

Available sheens: M603-21206 Flat M603-21406 Satin M603-21606 Semi-Gloss

Retarders & Reducers

No Blush™ Plus Retarder......page 64

No Blush™ Blender Flat......page 65

Super Blush™ Retarder......page 66

Blender Flow-Out™......page 67

Lacquer Reducer 2255......page 68


No Blush™ Plus Retarder

Humidity or cold weather can cause a finish to turn white (blush). No Blush™ Plus Retarder re-flows the finish and allows the trapped moisture to escape.


Recommended for: Most conditions and finishes

Suitable for: Suitable for finishes with sheens 40+



Uses:

1. To remove blushing.

2. To remove light scratches.

3. To remove "orange peel"

4. To blend over spray.

Advantages:

1. Easy to use.

2. Very effective.

3. Controlled results.

4. Will not raise the sheen of matt finishes.


No Blush™ Blender Flat

Super Blush™ Retarder

Blender Flo-Out™



Designed specifically for lower sheen finishes, No Blush™ Blender Flat smooths and levels finishes with orange peel or light scratches. No Blush™ Blender Flat can also be used to blend over-spray on spot repair work for various non-gloss sheens. It also works as a standard No Blush™ to remove the trapped moisture that causes problems like blushing.


Recommended for: Matt finishes

Suitable for: Only suitable for matt finishes (sheens 5-40)



Uses:



3. To remove areas of shine, such as rub marks, on matt finishes.

4. To remove "orange peel“.


Advantages:

1. Easy to use.

2. Very effective.





Blender Flo-Out™



Mohawk’s Super Blush™ Retarder is a highly effective blush remover aerosol designed for solving the most severe blushing problems. A couple of light applications are all that is needed to eliminate the white surface blush.


Recommended for: Sever blushing and high humidity conditions

Suitable for: Finishes with sheens 40+



Uses:



3. To remove "orange peel"


Advantages:

1. Easy to use.

2. Very effective.





Blender Flo-Out™


Blender Flow-Out™

Mohawk Blender Flo-Out™ is a highly active solvent formula with excellent flow designed to blend in overspray and o range peel. This product is most suited as the final spot repair finish.



Uses:


2. To blend in "orange peel“.

Advantages:

1. Easy to use.

2. Excellent blush resistance.





Product Number Sheen

M103-0176 Flat (10-15)

M103-0419 Satin (40)

M103-0440 Gloss (>75)

Available sheens:


Lacquer Reducer 2255

Formulated with only the highest quality solvents, Lacquer Reducer 2255 helps prevent orange peel and helps provide good flowout. Recommended for use with all Mohawk nitrocellulose, pre-catalysed and post-catalysed lacquers.


Suitable for: Use with all Mohawk nitrocellulose, pre-catalysed and post-catalysed lacquers.

Net volume: 1 gallon/3.78 litres

Uses:

1. To prevent orange peel and provide good flow out.

Advantages:

1. Enhance flow and atomization.

2. Reduce solids content to control build.

3. Special blend provides proper evaporation rate.


Rubbing Compounds

Wool-Lube Rubbing Lubricant......page 70

Liquid Rubbing Compound......page 71

Poly-Buf™ Rubbing Compound......page 72

Pumice Stone......page 73


Wool-Lube Rubbing Lubricant

Wool-Lube paste is a highly concentrated, multi-purpose, water reducible, non-abrasive rubbing and sanding lubricant. Wool-Lube can be used in conjunction with steel wool, abrasive pads, or wet-dry sandpaper to create a smooth, clear final appearance on all finishes.


Sheen produced: Matt to satin

Volume: 473ml

Uses: 1. As a rubbing and sanding lubricant. 2. When reduced with water and used with steel wool or abrasive pads it can be used to remove packing marks and scratches from finished surfaces. 3. As a preparatory step for higher sheen rubbing agents.

Advantages: 1. Easy to use. 2. Will not gum up. 3. Wipes clean: finishes rubbed with Wool-Lube and an abrasive can be

recoated immediately after being wiped dry. 4. Can be lacquered over: does not interfere with the adhesion or drying

of lacquer. 5. Highly concentrated, water reducible paste. 6. Non-abrasive. 7. The velvet-satin lustre will not haze. 8. Non-toxic. 9. Contains no silicones. 10. Can be used with dry abrasive powders, such as Pumice, and Rotten

Stone. 11. Using a sanding lubricant greatly extends the life of waterproof

sandpapers.

Use with: Steel wood, wet-dry sandpaper, or abrasive pads Liquid Rubbing Compound Poly-Buf™ Rubbing Compound


Liquid Rubbing Compound (3-Step)

Level II (Medium to High Sheen)

Mohawk’s Level II Rubbing Compound series will produce a medium to high sheen on coatings such as lacquers, shellac, varnish, etc.

STEP 1: Liquid Rubbing Compound

Used to remove overspray and wet sanding scratches on conventional and modern high tech finishes. Yields a high satin sheen.

STEP 2: Liquid Polishing Compound

Cleans and polishes while removing Step 1 Liquid Rubbing Compound scratches and swirl marks. Yields medium gloss sheen.

STEP 3: Liquid Finishing Compound

Removes swirl marks from Step 2 Liquid Polishing Compound and increases surface gloss. Leaves a “polished” look.

Uses: 1. To polish and buff. 2. To remove light scratches from a finish. 3. To remove over spray. 4. To remove wet sanding scratches.

Advantages: 1. Semi paste form. 2. Quick clean up. 3. Creates a polished look. 4. Can be used with hand or machine buffing.

Use with: Use as a stand alone product, or After using Wool-lube Rubbing Lubricant, and/or Before using Poly-Buf™ Rubbing Compound Level

III (Super High Sheen)

Product Numbers:

M730-0106 Step 1: Liquid Rubbing Compound (946ml)

M730-0206 Step 2: Liquid Polishing Compound (946ml)

M730-0306 Step 3: Liquid Finishing Compound (946ml)

Product Limitations: For medium to high sheen gloss.


Poly-Buf™ Rubbing Compound

Level III (Super High Sheen)

This three-step rubbing compound system will produce the highest sheen possible from a clear coating, leaving the finish with a super high sheen “wet” look. This system should be used after treating the finish with the Liquid Rubbing Compound Level II system.

Sheen produced: Super high sheen “wet” look

Uses: 1. Polish and buffing.

Advantages: 1. Semi Paste form. 2. Quick clean-up. 3. Best performance with machine buffing.

Use with: Liquid Rubbing Compound (3-Step) Level II (Medium to High Sheen)

Product Numbers:

M890-0014 Medium (237ml)

M890-0024 Fine (337ml)

M890-0034 Extra Fine (237ml)


Pumice Stone

Pumice Stone, 4F Grit produces a soft lustre. Use to produce a smooth finish after applying the final coat of lacquer or varnish.


Weight: 5lb/2.3kg

Uses: 1. To produce a smooth finish after applying the final coat of varnish.

Use with: A paraffin based rubbing oil.


Polishes

Oz® Polish......page 75

Scratch Off™......page 75

Furniture Cleaner & Restorer ......page 76

Scratch & Mar Resister Polish......page 76


Scratch Off™ leaves worn timber surfaces looking like new. Its special formula covers scratches and minor imperfections as you polish. Scratch Off™ can be used on new or used furniture, woodwork, doors and panelling.


Net volume: 384ml

Uses: 1. To polish and rejuvenate worn or scratched finishes.

Advantages: 1. Easy to use. 2. Instant results. 3. Only needs to be used sparingly.

Alternative products: 1. Furniture Cleaner & Restorer

Available in aerosol form: 1. M107-0381 Mahogany Aerosol 2. M107-0320 Natural Aerosol 3. M107-0321 Golden Oak Aerosol Available in liquid form: 1. M840-4004 Scratch of for Light Finishes

(237 ml liquid ) 2. M840-2004 Scratch of for Dark Finishes

(237 ml liquid )

Mohawk’s Oz® Polish contains everything you need to clean, polish and protect your furniture. As well as being the ultimate one-step furniture polish, Oz® Polish contains an antistatic agent to reduce the need for dusting, an Ultraviolet light absorber to prevent fading, and a lemon scent for a fresh, clean fragrance. It's safe! It's sure. It's the easiest one step operation in the business. Oz® Polish is really polishing magic.



Advantages: 1. Cleans, polishes and protects. 2. Contains an antistatic agent. 3. Ultraviolet light absorber helps to protect

your furniture from fading. 4. Non-abrasive. 5. Greaseless. 6. Quick drying.

Uses: 1. Can be used to clean, polish and protect any smooth finished surface, including: timber, tile, marble, chrome etc.

Available as: 1. M107-0860 Aerosol 2. M860-0006 946ml Liquid

Alternative products: 1. Scratch & Mar Resister Polish

Scratch Off™

Oz® Polish


Mohawk Scratch & Mar Resister Polish is designed to make finished wood surfaces more resistant to scratches and marring than an untreated surface by adding surface lubrication. Mohawk Scratch & Mar Resister Polish reduces printing of the surface, packing marks and will not affect the finish sheen.

Application method: Spray or cloth

Uses: 1. To polish protect finished wood surfaces.

Advantages: 1. Provides scratch resistance to wood. 2. Reduces coefficient of friction by adding

surface lubrication. 3. Natural and tinted formulas, for light and dark

finishes. 4. Contains an anti-static agent. 5. Scratch & Mar Resister Polish can be recoated. 6. Does not affect the sheen.

Available as: 1. M811-0015 Tinted 473ml 2. M811-0005 Clear 473ml

Alternative products: 1. Oz® Polish

Furniture Cleaner & Restorer is a furniture polish with just a hint of colour. It was developed specifically to rejuvenate worn or scratched oil finishes on walnut, teak, rosewood and similar timbers. The easy spray-on, wipe-off procedure makes for a quick restoration.




Uses: 1. To polish and rejuvenate worn finishes. 2. To mask light scratches.

Advantages: 1. Restores colour as it cleans. 2. Hides scratches.

Advantages: 1. For dark wood furniture only.

Alternative products: 1. Scratch Off™

Scratch & Mar Resister Polish

Furniture Cleaner & Restorer


Adhesives

Instant Adhesive Cyanoacrylate Glue......page 78 Aerosol Adhesive......page 79

Loctite® Vinyl, Fabric & Plastic Adhesive......page 79


Industrial Grade Instant Adhesive Cyanoacrylate Glue

Industrial grade for maximum bonding strength.

The Thin Adhesive wicks into tight places where flowing into and under is essential.

Medium and Heavy Adhesives for semi-smooth surfaces.

Gel Adhesive for filling and bonding porous surfaces.

The non-whitening activator accelerates curing time.

The De-Bonder removes unwanted or excess glue.

Pro Tips Extension Applicators: thin, needle-like plastic tube attaches to the tapered tip of the CA glue bottle. Allows dispensing of glue into cracks and joins. This easily replaceable tip helps avoid clogging of the main tip on the bottle. Suitable for use with Thin, Medium and Heavy CA Adhesives.

Uses: 1. To glue any combination of wood, naugahyde, plastic, veneers, cardboard, rubber, ceramics, leather or vinyl.

Advantages: 1. Easy to use. 2. Industrial grade for maximum bonding strength. 3. Non-yellowing. 4. Quick repair: instant set, no clamping. 5. Comes with a de-bonder for removing unwanted or excess glue.

Product Numbers: M745-1241 30 ml Thin Adhesive Clear M745-1005 60 ml Thin Adhesive Clear M745-1242 30 ml Medium Adhesive Clear M745-1330 30 ml Medium Thin Black M745-1001 60 ml De-Bonder M745-2002 60 ml Activator M745-3550 Pro Tips Extension Applicators (12 pack) M745-1499 Instant Adhesive Starter Kit

Instant Adhesive Starter Kit Contents: 60 ml Thin Adhesive 60 ml Medium Adhesive 20 g Gel Adhesive 60 ml De-Bonder 60 ml Activator


Now available in Medium Thin Black

Used to effectively fill joints for a seamless appearance. It serves as a quick setting, stabilizing, production joint filler. It is able to fill very narrow joints for a seamless look. When activated, glue sets in 20-25 seconds. Will not clog your machine sanding belts. Stays in very thin joints because of the adhesive. It will five that final seamless look. Allows you to be assured the joint is filled before finishing. Will not bleed through any solid coloured lacquer, even white.

Aerosol Adhesive Spray Adhesive offers a fast tack time, which enables general purpose bonding on a wide variety of substrates, high bond strength and may be used to create a temporary or permanent bond. Its unique formula prevents soak in of the adhesive on porous surfaces. Recommended for use on the following substrates: polyurethane foam, wood, paper, and fabric.




Uses:

1. Adhesive for use on wood, polyurethane foam, paper, and fabric.

Advantages:

1. Non-Methylene Chloride.

2. Meets US Federal & State V.O.C. Requirements.

3. All purpose mist spray.

4. Fast tack time enables general purpose bonding on wide variety of substrates.

5. Water white.

6. Unique formula prevents soak in of the adhesive on porous surfaces.

7. High bond strength.

8. Repositionable or permanent depending on application.

9. Bonds polyurethane foam, wood, plastic, leather, paper and fabric.

10. Won't degrade Styrofoam® significantly.


Loctite® Vinyl, Fabric & Plastic Adhesive

Loctite® Vinyl, Fabric & Plastic Flexible Adhesive is a clear liquid formulated for repairing and mending flexible plastics such as vinyl seats, cushions, tarps and outdoor gear. The adhesive is highly flexible to withstand bending and twisting. It dries to a transparent and waterproof bond. It will not yellow or go brittle with age.


Net volume: 1 FL OZ/59g

Uses:

1. Adhesive for use on paper, glass, metal, ceramic, leather, wood, fabric rubber and some plastics.

Advantages:

1. Waterproof so it can be used for interior or exterior applications

2. Dries clear for invisible repairs and eliminates unsightly tape or patches

3. Remains flexible and will not brittle or yellow with age for long lasting repairs

Lubricants

E-Z Slip™ Lubricant......page 81


E-Z Slip™ Lubricant

Greaseless and silicone free, E-Z Slip™ Lubricant is the perfect lubricant for wooden drawers, doors, windows and any other wooden fixtures that tend to bind. It reduces friction, prevents wear, and helps to increase ease of moving parts.




Uses: 1. Lubricant.

Advantages:

1. Does not contain silicone.

2. Greaseless.

3. Reduces friction.

4. Prevents wear.








Hydro Cleaner Wood Floor Cleaner Hydro Cleaner Wood Floor Cleaner is a ready-to-use, environmentally friendly cleaner and wax remover for sealed laminate and hardwood floors. Hydro Cleaner should be applied by spraying a light mist of product over a 6 ft. x 6 ft. section (or smaller). After a short time, remove the product by working with a very light abrasive pad or a mop. For best results, rinse with clear water. Heel marks and heavier dirt marks can be removed with a cloth soaked with Hydro Cleaner.


Volume: 1 quart / 946ml

Suitable for: Sealed laminate and hardwood floors

Application method: Spray

Hydro Cleaner Wood Floor Protector Hydro Care Wood Floor Protector is a water-based, environmentally friendly, wax maintenance product that can be used on all types of wood. Hydro Care should be applied in very thin coats and is intended to even up (refresh) the appearance in the traffic areas of the floor while providing a thin, soil resistant protective coating.

Product number:

M730-30016 1 quart / 946ml

M730-30017 1 gallon / 3.785 litres



Natural Wax Care for Natural Oiled and Prefinished Floors Natural Wax Care is applied to natural oiled floors to freshen up the surface by providing a new impregnation of oil with a silky sheen finish. Natural Wax Care is used when floors are scratched or worn.


Volume: 473ml

Suitable for: Natural oiled hardwood floors

Application method: Cloth


Colour Systems

Wiping Wood™ Stain Aerosol......page 85

Coloured Lacquer Enamel......page 86

Primer Sealer......page 87

Metallic Aerosol......page 87

Break-A-Way™ Glaze......page 88

Finisher’s Glaze™ Glazing Stain......page 89

Bronzing Powder......page 90


Wiping Wood™ Stain Aerosol

Pigmented wiping stains that create beautiful, grain-enhancing, fade-resistant wood tones. Wiping Wood™ Stains can be used as stand alone or in conjunction with other Mohawk products to create professional finishes with rich depth of colour. Spills are out of the question with Wiping Wood™ Stain Aerosols. No stain dribbles down the side of the container while stirring, just shake the can. Apply by spraying the stain to the surface of the wood and using a brush or a cloth to spread the colour. Cleanup is accomplished by inverting the can and depressing the nozzle for about 5 seconds.

Colorant: Pigment




Uses: 1. Staining.

Advantages:

1. Truly professional stain in an aerosol.

2. Contain pigments that resist fading from UV rays.

3. Easy to use, no mess, no spills.

4. Great for easy application on carved surfaces and hard to reach areas.

5. 12 popular colours to choose from.

6. Colours are matches for corresponding Mohawk Wiping Wood Stains in bulk.

7. HAPS compliant.

Use With: For best results seal and top-coat with an appropriate Mohawk product

Available as:

Individual Colours


Assortment Contents: M145-14786 Van Dyke Brown M145-02056 Medium Walnut M145-2026 White M145-2076 Medium Brown Walnut M145-2096 Extra Dark Walnut M145-2246 Black M145-2276 Dark Red Mahogany M145-2296 Brown Mahogany M145-2496 Perfect Brown M145-2736 Modern Mahogany M145-4086 Cherry M145-4156 Light Golden Oak 12 Pack Assortment contains one of each colour


Opaque solid for interior use only. Fast drying, lacquer based enamel. Superior hiding power for producing opaque finishes. These products do not need to be top-coated with a clear coat.

Colorant: Pigment


Opacity: Opaque


Uses: 1. For colour replacement after touch-ups or repairs. 2. To colour and finish small pieces.

Advantages:

1. Easy to use.

2. Various colours available.

3. Complete coverage with minimal number of coats.

Use With: Primer Sealer

Available Colours:


M104-1290 Medium Reddish Tan

M104-G202 White Gloss

M104-G224 Black Gloss

M104-S224 Black Satin

M104-0300 New Fontana (background)

Primer coat for use under coloured lacquer enamels. Insures good adhesion for the final top-coat. Primer Sealer is fast drying and easy sanding, resulting in a smooth base. Has excellent colour strength. New formula quickly covers in two coats and sands well.

Colorant: Pigment


Opacity: Opaque


Uses: 1. Primer coat under coloured lacquer enamels.

Advantages:

1. Easy to use.

2. Good adhesion.

3. Quick drying.

Use With: Coloured lacquer enamels

Available Colours:

M103-0447 White

M104-0224 Black


Coloured Lacquer Enamel

Primer Sealer

Mohawk’s Metallic Aerosol product line contains pure, bright gold powders in a stable, non-yellowing, non-greening, unique formulation for use on metal, wood, picture frames, ceramics, etc. This is a decorative finish that will not tarnish.

Colorant: Pigment


Opacity: Opaque


Uses: 1. Decorative finish.

Advantages:

1. Easy to use.

2. Good Adhesion.

3. Bright stable colours.


Available Colours:

M104-0439 Bright Gold

M104-0109 Antique Gold

M104-0438 Rich Pale Gold

M104-1542 Silver B/A

Metallic Aerosol


Break-A-Way™ Glaze

Break-A-Way™ Glaze will help you create dramatic, clean accent lines on any shaped surface. You may never want to wipe a glaze again after trying Break-A-Way™ Glaze. Mohawk’s Break-A-Way™ Glaze is the perfect product to easily add heavy hang up and detail accent colour to ornate fine woodworking or cabinetry. Break-A-Way™ Glaze Aerosol is spray applied over a sanded sealer or finish coat and then allow drying to a chalky, powdered state that is easily removed from unwanted areas using light pressure with a synthetic abrasive pad. Break-A-Way™ Glaze must be top-coated with a clear finish.

Colorant: Pigment



Uses: 1. To add heavy hang up. 2. To create dramatic, clean accent lines.

Advantages:

1. Convenient aerosol application.

2. May be used under or over waterborne finishes. Note: allow to dry 1 hour after removing excess if top-coating with a water borne finish.

3. Superior hang and build compared to solvent glazes.

Use With: Sanding sealer of your choice Topcoat of your choice

Available Colours:

M155-0202 White




Finisher's Glaze™ Glazing Stain

A truly professional glaze in an aerosol. No mess, no fuss. Just shake and spray. No lid to open. No messy stir stick. No spills. No messy applicator. This is a medium viscosity glaze formulated to yield great workability, with a high pigment load that assures the opacity you need for great coverage, and a solvent system that is so coatings compatible that you can top-coat within just minutes. Use this glaze for quick and easy touch-ups, finishing applications, refinishing, and expedient application on carvings and into corners. In short, use it for anything you can do with a bulk glaze...only faster.

Colorant: Pigment



Uses: 1. Quick and easy touch-ups. 2. Finishing applications. 3. Refinishing.

Advantages:

1. Truly professional glaze in an aerosol.

2. Easy to use, no mess, no spills.

3. 6 popular colours to choose from.

4. HAPS compliant.

Use With: Sanding sealer of your choice Topcoat of your choice

Available as:

Individual colours


Individual Colours Available:

M114-0143 Raw Umber

M114-0202 White

M114-0224 Black

M114-0384 Deep Mahogany



The 6 Pack Assortment contains one of each colour


Bronzing Powder

Concentrated lining grade bronzing colours free of fillers and extenders. Used to decorate picture frames, furniture, lamps, antique objects and many other items. For extra bright effects, highlighting is effective. Raised portions of a frame can be burnished to a higher lustre thus creating a contrast with the rest of the work.

Colorant: Pigment

Form: Powder

Net volume: 1oz/29g or 8oz/227g

Uses: 1. To decorate picture frames, furniture, lamps,

antique objects and other items.

Advantages: 1. Fade resistant, non-bleeding permanent

colours. 2. Ultra fine ground for maximum colour yield. 3. Colours transfer and blend easily on the

surface without attacking the finish. 4. May be top coated immediately.

Use With: Topcoat of your choice.

Colours Available:

M380-1091 Antique Gold 1oz

M380-1094 Antique Gold 8oz

M380-4361 Silver 1oz

M380-4364 Silver 8oz

M380-4371 Pale Gold 1oz

M380-4374 Pale Gold 8oz

M380-4381 Rich Pale Gold 1oz

M380-4384 Rich Pale Gold 8oz

M380-4391 Rich Gold 1oz

M380-4394 Rich Gold 8oz


Miscellaneous

Danish Oil Aerosol......page 92

Lacquer for Brass Aerosol......page 92

Crackle Lacquer......page 93

Tools & Hardware

Mohawk Leveller Card......page 94

Finisher's Colourwheel™......page 94

Clear Bumper Disc......page 94

Pressure Unit Spray Tool......page 95

Power Pack (Preval)......page 95

Replacement Nibs......page 96

Spray Heads......page 96

Match All Graining Brush......page 96

Red Sable Art Brush #3......page 96

Mohawk Craftsman Apron......page 96

Pro-Mark™ Marker Pouch (Empty)......page 96

Training & Literature

Understanding Wood Finishing by Bob Flexner......page 97

Wood Touch-Up And Repair DVD......page 97

Professional Finishing Systems DVD......page 97


Danish Oil Aerosol Danish Oil is a polymerized wood finish, which combines penetrating oils with urethane resins to produce a natural oil finish on unfinished wood. Danish Oil produces a natural looking finish that won't chip or peel away as the polymerized finish seals and hardens the wood.


Suitable for: Unfinished wood (Danish Oil should not be applied over lacquer or other finished surfaces).



Uses:

1. To create a natural looking oil finish on unfinished wood.

Advantages:

1. One application seals and finishes wood.

2. Never gums up in warm temperatures.

3. Will not print and is non-greasy.

4. Water spots, stains, burns and scratches are easily removed by buffing with 4/0 steel wool and Danish Oil.

5. Available in aerosol form for easy application.

Lacquer for Brass Aerosol A lacquer for brass and other metals. The lacquer contains an anti-tarnish additive to keep metals bright, clean and new looking longer. Mohawk’s "Lacquer for Brass” will show excellent adhesion on a variety of metals and will maintain the high gloss brilliance of plating, including chrome.


Suitable for: Metals such as: brass, bronze, nickel, silver, tin, aluminium, etc



Uses:

1. To protect metal surfaces and prevent tarnishing.

Advantages:

1. Excellent adhesion to metal surfaces.

2. Easy to use.

3. Quick drying.

4. Tarnish resistant formula.

5. Good wear properties.

6. Water-clear.

7. Non-yellowing.


Crackle Lacquer

Crackle Lacquer creates a quick antique crackle-like finish when applied

over a contrasting gloss such as Mohawk Coloured Lacquer. For example,

black over white yields white visible in the cracks or clear over white

simulates an antique white enamel finish. Effective only when a wet coat

is applied with a spray gun over conventional gloss lacquer finish.


Net volume: 1 Gallon/3.78 litres

Uses:

1. Quick results.

2. Self controlled results.

3. Can be glazed for antique effect.

Advantages:

1. Quick results.


3. Can be glazed for antique effect.

Uses:

1. Must be clear coated for protection.


Individual Colours Available:

M616-1257 Crackle Lacquer Clear


Tools & Hardware

Mohawk Leveller Card The Leveller Card can be use with Quick Fill® Burn-In Sticks, Epoxy Putty Sticks and to Fil-Stik™ Putty Stick to level, shape or remove excess product.


Use with:

Epoxy Putty Stick

Fil-Stik™ Putty Stick

Quick Fill™ Burn-In Stick

Finisher's Colourwheel™ From novice to pro, take your "turn" and find the colour you need every time. See how colours interact. Features a five colour intensity scale, to help match your desired shade. Twelve standard wood colours duplicated on birch veneer. Includes eighty different colour variations. A real time saver for matching colours.


Clear Bumper Disc Features: excellent non-skid, high coefficient of friction. Non-marring and non-staining. Permanently resilient - won't crack or harden. Excellent abrasion resistance, vibration and shock- damping. Uses: spacers for cabinet doors, lids, and drawers. Feet on the bottom of cabinetry, clocks, speakers, etc. Bumper Protectors for chairs, walls and sliding doors. Pads and Cushions for fans, small appliances, and furniture. Product number: M940-0404


Pressure Unit Spray Tool No hoses, compressors or wires. Sprays any thinned liquid. Portable industrial sprayer without the usual encumbrances. Utilizes the same principle as commercial spray guns. Replaceable power pack contains a liquid propellant that will spray up to 30 ounces of paint or other sprayable material. Precision preset spray head assures a perfect spray pattern. Ideal for maintenance and production jobs throughout the shop. Extra jars and caps available. Not recommended for waterborne paint.

Power Pack (Preval) Versatile for making your own aerosol. Ideal for stains, lacquers, paints, varnishes, shellac, cleaners, polishes, and epoxy coatings. Power Pack will dispense 16 oz. of liquid with the same fine spray as aerosol cans. For heavy spray. Extra available.

Product Code

Power Pack Aerosol (6.5oz/184gm) complete with Head & Jar (4oz/28gm) M110-0904

Power Pack Replacement Aerosol (6.5oz/184gm) M110-0905

Power Pack Replacement Snap on Head M110-0906

Power Pack Replacement Jar (4oz/118.29ml ) & Cap M110-0903

Product Code

Preval Power Pack (1.94oz/55gm Aerosol ) with Jar (1oz/29.5ml) M110-4950

Preval Replacement Jar (6oz/177.4ml) & Cap M110-4953

Preval Replacement Jar (1oz/29.5ml) & Cap M110-4952


Product Suitable for Pack size

Code

Acrylic Chisel Point Ultra Mark & E-Z Seal Pens Pack 24 M264-1004

Acrylic Bullet Point Ultra Mark Pens Pack 24 M264-1007

Acrylic Chisel Point

Background Marker, Background Marker Glaze Hang Up, Quik-Tip ™ Marker Background Marker, Background Marker Glaze Hang Up, Quik-Tip ™ Marker

Pack 12 M290-1001

Acrylic Bullet Point Background Marker, Background Marker Glaze Hang Up, Quik-Tip ™ Marker

Pack 12 M290-1002

Polyester Bullet/Chisel Point

Background Marker, Background Marker Glaze Hang Up, Quik-Tip ™ Marker

Pack 12 M290-1003

Acrylic Brush/Chisel Point

Background Marker, Background Marker Glaze Hang Up, Quik-Tip ™ Marker

Pack 12 M290-1004

Product Pack size Code

Aerosol replacement spray head STANDARD Pack 12 M120-0194

Aerosol replacement spray head FAN Pack 12 M120-2030

High Volume Spray Head for Finishers Glazing Stain Pack 12 M120-2040

Fine Spray Head Pack 12 M120-0195

Fan Type Spray Head Pack 12 M120-0196

Medium Spray Head Pack 12 M120-0200

Heavy Spray Head Pack 12 M120-0210

Large Button Cone Spray Head Pack 12 M120-0220

Spray Head Replacement, Leather Repair Basecoat Pack 12 M120-3000

Replacement Nibs

Spray Heads


Match All Graining Brush Product Code: M901-4603

Excellent brush for graining. Tapered to a fine point.

Red Sable Art Brush #3


Training and Literature

Understanding Wood Finishing by Bob Flexner Highly recommended for any woodworker, from beginner to advanced. In Understanding Wood Finishing, you’ll find:

Tips for getting the perfect finish.

Tricks for determining what kind of finish you’re really buying.

A handy chart telling which stains are compatible with which finishes.

Step-by-step finishing schedules.


Wood Touch-Up And Repair DVD The Mohawk Wood Touch-Up and Repair Interactive Training System is designed to teach you the most up to-date wood touch-up and repair techniques offered in the industry. This interactive DVD will provide you with instructions in: damage analysis, filling of damages, replacing colour, grain replacement, spot finish application, sheen adjustment, scratch removal, finish care and much more. (120 Min)


The Mohawk Professional Finishing System™ DVD Designed to show you how to produce today's most popular finishes with our new Professional Finishing System™ products. You will be able to confidently recreate the finishes using an assortment of Mohawk's different finishing products.



Mohawk Craftsman Apron


Neck band and tie strings. Pencil and standard Pockets. Imprinted with Mohawk Finishing Products, Inc. Royal blue colour. 28” x 26” size. Neck strap: 24”

Pro-Mark™ Marker Pouch (Empty) Product code: M959-2674

Holds 24 Markers

Keeps your Pro-Mark™ Touch Up Markers organized

Colour selection is always visible

Easy to carry pouch that holds 24 Pro-Mark™ Markers

Made of Heavy-duty Nylon

Rolls up and ties for easy handling

Great for in the shop or on the truck

Repair Kits

We also provide a range of professional repair kits for furniture, flooring and cabinets. If you would like more information about our repair kits, please contact us.

FREE TRAINING: If you purchase a eligible Mohawk repair kit you will receive two days complementary training in the use of Mohawk products for timber touch-up and repair. Training is conducted four

times a year (depending on demand) in small groups – no more than ten people – at the Multimaster offices in Sydney.

Multimaster Australia Pty Ltd ABN: 23001 673 361

Kirrawee Business Centre 12/398 The Boulevarde

Kirrawee NSW 2232

Phone: +612 8536 9000 Fax: +612 8536 9001

email: [email protected]


mailto:[email protected]

Recommended Consumer Products

Fil-Stik™ Putty Stick & Ultra™ Mark Marker Blister Pack......page 100










Fil-Stik™ Putty Stick & Ultra™ Mark Marker Blister Pack

Fil-Stik™ Putty Stick ....page 100


Product Number

Colour

M827-1418 NATURAL

M827-1417 VAN DYKE BROWN

M827-1416 ALMOND/INTERIOR PUTTY

M827-1415 DEEP MAHOGANY

M827-1414 NEWPORT EBONISED CHERRY

M827-1413 MEDIUM BROWN WALNUT

M827-1412 DARK WALNUT

M827-1411 CHERRY/NUTMEG

M827-1410 DARK RED MAHOGANY

M827-1409 EXTRA DARK WALNUT

M827-1408 BLACK/JAVA

M827-1407 WHITE

M827-1422 Kaffee

M827-1420 English Saddle

M827-1419 Earth Tone

M827-1421 Driftwood

Ultra™ Mark Markers....page 102

Mohawk’s Ultra™ Mark Markers contain light-fast pigments which seal, stain and finish in one easy operation. They are compatible with all types of finishes, making them ideal for edge and scratch re-colouring. For further protection, markers may be finished with Tone Finish® Clears, or other topcoats, including: lacquers, acrylics, varnishes and urethanes.

A handy blister pack for quick touch-ups. Contains 1 x Fil-Stik™ Putty Stick and 1 x Ultra™ Mark Marker. 16 colour combinations available.

Packs Available


Fil-Stik™ Putty Stick Individual Blister Packs


Type: Semi-hard putty

Durability: Low

Adhesion: Low

Dry time: Handle or topcoat immediately after application



Uses: 1. To refill small areas of damage, such as

nicks, nail holes, cracks, open corner joints, etc.

Advantages: 1. No heat or special tools required. 2. Simply rub in and wipe off. 3. Fade resistant, non-bleeding

permanent colours. 4. May be topcoated immediately with

Ultra™ Bond Waterborne Clear Finish Marker or other coatings.

5. A wide range of stock colours are available.

Use with: Mohawk Leveller Card Ultra™ Bond Waterborne Clear Finish

Marker (or topcoat of your choice)

Note: we recommend sealing the repair with Tone Finish Flat Easy Sanding Sealer before using Ultra™ Bond Waterborne Clear Finish Marker to reduce colour transferring onto the marker sponge.

Individual Colours Available in Blister Packs: M230-1516B Pine M230-9838B Old World Mahogany M230-9839B Rustic Cherry M230-2052B Medium Oak M230-0408B Cherry M230-0333B Heritage Oak M230-0209B Extra Dark Walnut M230-0207B Medium Brown Walnut M230-0202B White M230-0206B Light Walnut


Pro-Mark™ Marker Individual Blister Packs

Whether you need to touch-up 1 inch or 20 feet, the dye-based Pro-Mark II marker does it the first time and every time. Pro-Mark™ Marker colours have excellent resistance to fading, colour shift from topcoats, and will not bleed. The nib offers superior flow along with the durability needed to do all normal repair work. The nib remains usable for the life of the marker. Pro-Mark™ Markers have good adhesion and mark equally well with the edge, the bottom or the tip.

Colorant: Dye



Uses: 1. Re-colouring edges and scratches.

Advantages: 1. Fast and easy to use. 2. Excellent flow. Will not skip even when used on porous materials. 3. Good adhesion to most surfaces and resistance to polishes. 4. Uniform colour strength. 5. Bleed resistant. 6. Nib remains usable for the life of the marker for normal applications. 7. Can be used at any angle, including upside down. 8. Highest rated lightfast dyes for complete clarity and colour retention. 9. Transparent colour allows the characteristics of the wood to show through.

Use With: Pro-Mark™ Markers can be used as a stand-alone product, but we recommend that you apply a topcoat, to obtain maximum durability

Individual Colours Available in Blister Packs: M267-1516B Pine M267-0484B Brown Paprika M267-0408B Cherry M267-0388B Cherry/Fruitwood M267-0385B Deep Cordovan M267-0364B Heartwood Walnut M267-0363B Dark Red Walnut M267-0249B Perfect Brown M267-0246B Red Brown Mahogany M267-0207B Medium Walnut/Brown

Pecan M267-0063B Honey Maple M267-0418B Mocha Brown M267-0474B Warm Oak


Ultra™ Mark Marker Individual Blister Packs

Mohawk’s Ultra™ Mark Markers contain light-fast pigments which seal, stain and finish in one easy operation. They are compatible with all types of finishes, making them ideal for edge and scratch re-colouring. For further protection, markers may be finished with Tone Finish® Clears, or other topcoats, including lacquers, acrylics, varnishes and urethanes.

Colorant: Pigment


Opacity: Medium

Uses: 1. Re-colouring edges and scratches. 2. Colouring repairs made with Mohawk

fillers, particularly Fil-Sticks.

Advantages: 1. Fast and easy to use. 2. Valve type tip provides fluid control. 3. High opacity 4. Excellent light fastness (contains UV

inhibitors). 5. Even when the cap is left off, the tip can

be re-primed, so you can use all the liquid inside the marker.

6. Replaceable nibs available in four different styles.

7. Compatible with all types of finishes. 8. Seal, stain and finish in one application.

Use With: Ultra™ Mark Markers can be used as a stand-alone product, but we recommend that you apply a topcoat, to obtain maximum durability

Replacement Nibs:

M264-1004 Chisel Point (24 per pack)

M264-1007 Bullet Point (24 per pack)


Pro-Mark™ Marker

Individual Colours Available in Blister Packs: M280-1522B Statesman Oak #2 M280-0415B Light Golden Oak M280-0408B Cherry BG M280-0227B Dark Red Mahogany #2 M280-0221B Honey/Caramel M280-0218B Light Red Mahogany M280-0209B Extra Dark Walnut #2 M280-0202B White M280-0143B Raw Umber M280-0236B Brown Maple


Ultra™ Bond Waterborne Clear Finish Marker

Mohawk Ultra™ Bond Waterborne Clear Finish Marker produces a durable, chemical resistant, water clear finish for use on flooring, cabinets, furniture and many other surfaces. Has excellent adhesion on most hard to adhere to finishes such as urethane, UV and aluminium oxide. A truly multi-purpose topcoat for those small repairs and finishing needs.



Resin System: acrylic/urethane


Can be used with: Fil-Stik™ Putty Stick Quick Fill™ Burn-In Stick Pro-Mark™ Marker Ultra™ Mark Marker Hard Fill and Hard Fill Plus And many more Mohawk repair

products

Uses: 1. Topcoat to protect repairs and touch-ups.

Advantages: 1. Easy to use. 2. Excellent adhesion. 3. Durable, resistant water clear finish. 4. Multi-purpose topcoat for small repairs. 5. Low odour. 6. Fast drying. 7. Blends well into the surrounding area,

providing a nearly invisible repair.

Product Number Sheen Sheen Range Solids (Wt. %)

M292-0020 Matt 25 28.7

M292-0040 Satin 40 28.7

M292-0060 Semi-Gloss 60 27.86

M292-0080 Gloss 80+ 27.2

Available sheens:


Blend-Its

A clear liquid filler and topcoat used to repair minor surface scratches, replace finish and to lock in other types of repair work. Adheres to most materials or finishes. Fast drying Blend-Its can be used on all finishes without fear of damaging the finish. Each jar comes with a brush attached to the cap for quick and easy application.

Finish Type: Liquid filler and topcoat

Curing type: Evaporative / Coalescing (waterborne)

Resin System: alkyd / acrylic

Application method: Brush

Solid WT%: 24.48

Volume: 15ml

Uses: 1. To repair minor surface scratches. 2. To replace finish. To lock in other types of repair work.

Advantages: 1. Fast drying. 2. Blend-Its can be used on all finishes without fear of damaging the finish. 3. Each jar comes with a brush attached to the cap for quick and easy application.

Product Number Sheen Solids (Wt. %) w/o gas

M450-0003 Flat 26.16

M450-0002 Satin 25.08

M450-0001 Gloss 24.48

M450-0005 Blend-IT Water Clear Touch Up 12.27

Available sheens:



Hydro Cleaner Wood Floor Cleaner Hydro Cleaner Wood Floor Cleaner is a ready-to-use, environmentally friendly cleaner and wax remover for sealed laminate and hardwood floors. Hydro Cleaner should be applied by spraying a light mist of product over a 6 ft. x 6 ft. section (or smaller). After a short time, remove the product by working with a very light abrasive pad or a mop. For best results, rinse with clear water. Heel marks and heavier dirt marks can be removed with a cloth soaked with Hydro Cleaner.


Volume: 1 quart / 946ml



Hydro Cleaner Wood Floor Protector Hydro Care Wood Floor Protector is a water-based, environmentally friendly, wax maintenance product that can be used on all types of wood. Hydro Care should be applied in very thin coats and is intended to even up (refresh) the appearance in the traffic areas of the floor while providing a thin, soil resistant protective coating.

Product number:

M730-30016 1 quart / 946ml

M730-30017 1 gallon / 3.785 litres



Natural Wax Care for Natural Oiled and Prefinished Floors Natural Wax Care is applied to natural oiled floors to freshen up the surface by providing a new impregnation of oil with a silky sheen finish. Natural Wax Care is used when floors are scratched or worn.


Volume: 473ml

Suitable for: Natural oiled hardwood floors

Application method: Cloth


Documents

Index [] · Fil-Stik™ Putty Stick.....page 7 Sand Thru Stick ... foreign materials from surfaces prior to repair work or applying new finishes. ... Also used for cleaning