Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1
Index
General Conditions of Sale Glossary Terms Weights
Doors DP Series Honeycomb Insulated Steel Stiffened Embossed
Frames Universal ME Series Drywall MH Series Double Egress ME Series Double Egress MH Series
Specialty Lead Lined Doors and Frames Bullet Resistant DF Series Door and Frames STC Eco STC 48 - 50 - 52
Sticks Universal SE Series Borrowed Lites ME/MH Series Cut & Notch and Panels EngineeringValu-PacDoor PartsFrame PartsHardware
Effective April 4, 2020
2
Conditions of SaleConditions of Sale
1. CONFORMANCE TO REGULATIONS - Manufacture, shipment and delivery are subject to any prohibition, restriction, priority, allocation regulation or condition imposed by or on behalf of the United States of America which may prevent or interfere with fulfillment of this order.
2. SELLER’S ACCEPTANCE - Until accepted in writing on this form by Republic Doors & Frames (“Seller”), Buyer’s order shall constitute an offer to purchase; when so accepted by Seller, this form shall constitute the entire contract between the parties [and Seller shall not be bound by any terms, conditions, representations, or warranties, express or implied, except as state herein]. It is understood by the parties, and Buyer hereby agrees, that no term or condition contained in any order submitted by Buyer which is inconsistent with, additional to or different from the terms and conditions stated herein shall be binding on Seller unless Specifically agreed to by Seller in a written acknowledgment or acceptance; unless Seller specifically so agrees, any inconsistent, additional or different terms or conditions appearing in any order submitted by Buyer shall be deemed waived by Buyer. Receipt by Buyer of Seller’s acceptance of goods without prompt objection to the terms and conditions herein set forth shall constitute acceptance by Buyer of such terms and conditions. It is understood that Seller’s acceptance of Buyer’s order is subject to credit approval.
3. GENERAL CONTRACT - Seller shall not be bound by the provisions of any contract and related documents governing the general construction requirements except for that portion of the specifications, unless modified in Seller’s Acknowledgment, which describes the scope of Sellers work.
4. DELAY - In no event shall Seller be liable for any claims for any consequential or any other damages resulting from failure or delay in delivery of material and/or field labor (if field labor is included as part of this order). Seller will endeavor to ship promptly and to make delivery on the date requested on the front hereof; however, time is not of the essence. It is understood that Seller cannot guarantee any time for delivery; that delivery to the initial carrier shall constitute delivery to Buyer; that Seller’s responsibility ceases upon delivery in good order to such carrier; and that all goods are shipped at Buyer’s risk. In any event, Seller will not be liable for any delay or failure in delivery or shipment of goods or for any default or failure to perform this contract, or for any damages suffered by reason thereof, when such delay, failure or default is directly or indirectly due to accident (in manufacture or otherwise), fire, flood, riot, war, embargo, labor dispute or stoppage, inadequate transportation, shortage of material or supplies, delay or default on the part of the Seller’s vendor, regulation by any governmental authority or any like or dissimilar cause beyond Seller’s control. In the event of the occurrence of any such cause or contingency, Seller may extend the delivery schedule of this contract for the duration of such cause or contingency or, at its option, cancel this contract in whole or in part without liability.
5. PARTIAL DELIVERY - Partial delivery shall be accepted by the Buyer and paid for at the price and on the terms herein stated. Any partial delivery of merchandise hereunder, whether or not provided for herein, shall constitute a separate sale, and payment therefor shall be separately made when due.
6. CLAIMS - Claim for errors, deficiencies or imperfections or delay not covered by Section 3 above will not be considered unless made in writing within 30 days after receipt of material. Seller, at its option, will replace or repair such materials as proven defective, or to allow for credit for their return. Seller will not accept the return of materials for credit or replacement without its previous written authority for such return. If materials appear defective, Buyer should discontinue their use and notify Seller Promptly so that Seller may investigate. Seller will not allow any claim for labor or expense occasioned by the use of defective materials, nor be responsible for damages beyond Seller’s price of the defective material. Seller shall not be liable for any claims for consequential damages whether founded in contract or in tort. Risk of loss involving materials should be F.O.B. shipping point, even though transportation costs may be included in price. Risk of loss shall be borne by Buyer and Buyer shall pursue claims with the carrier in the event of loss or damage in transit. Seller shall not be liable for liquidated damages. Expenses in connection with detention of carrier’s equipment at destination shall be for the account of Buyer. The remedies to Buyer hereunder are exclusive.
7. INDEMNIFICATION - Seller’s obligation to indemnify Buyer for any cause, except for patent infringement as provided in this Acknowledgment shall be limited to the established sole negligent acts of Seller’s agents and employees.
8. CANCELLATION - After acceptance of Seller, this contract may not be canceled or modified, or releases hereunder held be Buyer after the order is in process, except by Seller’s written agreement. If any cancellation or modification is agreed to by Seller, Buyer will promptly pay all reasonable engineering and other expenses incurred by Seller prior to its agreement to such cancellation or to be incurred by Seller in connection with such modification.
9. PAYMENT TERMS - The terms of payment specified on the front hereof shall be subject to change or limitation by Seller at any time either before or after delivery of any part of the goods under this contract, and Seller may demand payment in cash before delivery. Delivery may be withheld or shipment stopped in transit on an accepted order without any liability on the part of the Seller if, in the Seller’s opinion, Buyer’s ability to pay for the goods on the terms and conditions stated herein is in doubt.
10. LIENS - Seller shall not be required to waive its right of Mechanic’s Lien in advance of payment. 11. TAXES - Any tax, excise, duty or other governmental charge, whether federal, state, municipal or foreign, now or hereafter levied upon the manufacture, sales, use of shipment
of goods contracted for or sold hereunder will be charged to and paid for by Buyer. Tax exemption certificates acceptable to such taxing authorities will be accepted in lieu of such payment.
12. SELLER’S OPTIONS - If Buyer shall fail to make payments on this or any other order in accordance with Seller’s terms, or if Seller shall have any doubt as to Buyer’s responsibility, Seller may suspend performance hereunder, except upon receipt of security satisfactory to Seller.
13. COLLECTION - In the event Seller is forced to place the Buyer’s account for collection, Buyer agrees to pay all reasonable costs of collection including, but not limited to, reasonable attorney’s fees and court costs.
14. QUANTITY, WEIGHT AND SIZE - Material, unless otherwise provided shall be invoiced in accordance with Seller’s published schedules of weights, areas, bundles and standard lengths, which invoicing shall govern settlement in absence of a contrary showing.
15. SHOP PAINT - Where a shop coat of paint is specified, it shall mean one temporary protective coat of Seller’s standard shop paint and no special treatment, field or permanent painting of any kind is included unless expressly stated on the face hereof.
16. CHANGES IN WORK - Subsequent changes in the scope of the work required of seller shall be subject to any adjustment in price to be agreed upon by Buyer and Seller prior to any obligation of Seller for such changes, and such adjustment shall not be affected by the decision of third parties.
17. LITERATURE AND DESIGN - Material unless otherwise provided shall be in accord with Seller’s literature, unless modified in the interest of improvement, in which event it shall be deemed in accord with such literature. Seller assumes no responsibility for design prepared by others.
18. TRANSPORTATION ADJUSTMENT - When the price includes transportation it shall be adjusted to the increase or decrease in transportation rates at the time of shipment with rates at date this order is acknowledged.
19. INSPECTING AND TESTING - Seller shall not be liable for inspecting and testing charges unless expressly stated on the face hereof. 20. PATENTS - Seller shall indemnify and save harmless Buyer from any judgement for damages and cost which may be rendered against Buyer in any suit brought against Buyer
on account of the infringement by the materials, per se, supplied by Seller hereunder of any United States patent, provided prompt written notice be given Seller of the bringing of any such suit and an opportunity be given Seller to settle or defend the same as Seller may see fit, provided further that every reasonable assistance which Seller may require in defending any such suit be rendered to Seller by Buyer, the forgoing states the entire liability of Seller to Buyer for patent infringement.
21. APPROVAL OF DRAWINGS - If Seller prepares drawings or placing details, approval thereof by the Buyer or his representative or the representative of the owner of the project for which Seller’s materials are regarded as a final interpretation of all other documents, with respect to such drawings or details, and constitute authority for Seller to furnish material in accordance with those drawings or details.
22. DESIGN SAFETY FACTOR - Buyer agrees to any design safety factor provided in the products covered by this transaction is to accommodate variations in the properties of materials, manufacturing and operating conditions, and design assumptions, and under no condition should be considered as implying authorization for or protection against loads on such products which exceed the design limits.
23. COLLATERAL MATERIALS AND LABOR - This order does not include: collateral steel for fastening such material, ornamental iron, anchor bolts, glass, putty, glazing, glass cleaning, field painting, grouting, pointing, caulking, or any other material or labor unless expressly stated on the face hereof.
24. ARBITRATION - Neither Buyer or Seller shall be required to submit to arbitration in the event of any dispute unless Buyer and Seller shall agree in writing hereto at the time of such dispute, and arbitration is not to be a condition precedent, except by mutual agreement of the parties in writing, to the right of legal action by either part.
25. WARRANTY - Seller warrants to Buyer that it will, at its option and in its sole discretion, furnish F.O.B. McKenzie, TN (or other point of origin), a replacement for, repair, or refund the purchase price to Buyer of any goods of its manufacture or part or portion thereof proved to its satisfaction to be defective in workmanship for material under normal use and service within one year (365 days) from the date of delivery to such Buyer, provided that notice of such defect is given to Seller within such one year (365 days) period. Seller makes no warranty with respect to items on the reverse side here of supplied to Buyer by Seller but manufactured by others, except to the extent of any warranty given to Seller by such others. Buyer further agrees that Seller is not responsible for any other conditions over which Seller has no control. In no case shall Seller be liable for consequential damages arising from breach of any of the foregoing warranties. THERE IS NO IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, AND SELLER WILL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, OR FOR ANY LABOR, TRANSPORTATION OR OTHER COSTS OR EXPENSES RELATING TO SUCH REPLACEMENT OR SUCH REPAIR, INCLUDING ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This Warranty is for Buyer’s exclusive benefit and is not assignable or transferable, nor is Buyer permitted to present to its customer, or any third party, that it may rely on the Warranty.
Effective April 4, 2020
3
Glossary Terms
ACT ActiveANSI American National Standards InstituteAR Adams RiteAST AstragalAUTO AutomaticB Beveled Lock EdgeBH Binding HeadBJ Blank JambBS BacksetC Cylindrical Lock Prep (2 3/8” Backset)CAD CadmiumCB Cross BuckCERT CertifiedCH Cylindrical Lock Prep (2 3/4” Backset)CHOL Cylindrical Lock Edge Prep Omit Face CutoutCL CenterlineC/O CutoutCR Closer ReinforcementCRS Cold Rolled SteelCOMM CommunicatingCONC V-ROD Concealed Vertical RodCVR Concealed Vertical RodCOR/RUS Corbin/RusswinCTSK CountersunkCW Continuous WeldCY Inverted Blade LouverCYL CylinderDE Four (4) Channel Door Without McKenzie EdgeDL Four (4) Channel Door With Lapped Edge SeamsDP Pan & Lid DoorDS Double SwingDDLK DeadlockDEV DeviceDD Dutch DoorDRS DoorsELEC ElectricP1 Embossed 1 Panel DoorP2 Embossed 2 Panel DoorP4 Embossed 4 Panel DoorP6 Embossed 6 Panel DoorP8 Embossed 8 Panel DoorF/AST Flat Bar AstragalF FlushFA Folger AdamsFB FlushboltFC Floor ClearanceFG Full GlassF.H. Flat HeadFL Full LouverFRM FrameFW Face Weld
G Half Glass (G2, G3, G4, G6)GA GageGB Glazing BeadGBO Glass By OthersGLV Galvanized/GalvannealGOV’T GovernmentGSD Guide Sheet DoorsGSF Guide Sheet FramesHJ Hinge JambHVY HeavyH Heavy Weight Hinge - example: 5HHS Half SurfaceHDWE HardwareHNG HingeHNG-BS Hinge BacksetHR HourINA Inactive DoorINS Insulated - PolystyreneINT IntermediateITS Intertek Testing ServicesI/S InsideI/S-PNL Inside PanelL LouverLF LeafLH Left HandLHR Left Hand ReverseLIN LinealLOC LocationM Mortise Lock PreparationMAS Masonry AnchorME Masonry Frame (Mitered Corner)MH Drywall Frame(Mitered Corner)MK# Mark NumberMIN MinuteMISC RNF Miscellaneous ReinforcementMOD Modifiable DoorMOL Mortise Lock Edge Prep (No Face Cutout)MOLP Mortise Lock Edge Prep with Face PrepMRC MonarchM-RNF Mortise Exit ReinforcementM.S. Machine ScrewN Narrow LiteNH Non-HandedNT Non-TemplateNS Non-StandardO.H. Oval HeadOH Omit HingeOHOL Omit Hinge/Omit Lock PrepOL Omit All Lock and Latch PrepOS Omit StrikeOBS Open Back Strike
Abbreviations
Effective April 4, 2020
4
Glos
sary
Term
s
OS/PNL Outside PanelOSH Omit Silencer HolePA Parallel ArmPHIL Phillips HeadPNL PanelPIP Panel in PlacePLT PlatePOA Prepared Opening AnchorPR PairPREP PreparationPP-RNF Push Pull ReinforcementPS PolystyreneRH Right HandRHR Right Hand ReverseRIM Rim Exit DeviceRIM-RNF Rim Exit Device ReinforcementRIX RixsonRNF ReinforcementRPL Remove PanelSE Sticks Masonry ProfileSCR Sleeve Closer ReinforcementS.D.S. Self Drilling ScrewSGT SargentSH Sticks Drwyall ProfileSJ Strike JambSLB Seamless-BondoSLW Seamless WeldSS Steel StiffenedSSA Steel Stud AnchorSTC Sound Transmission Class
STD StandardS.T.S. Self Tapping ScrewSUAW Set Up and WeldSIL SilencerSPC SpecialS Standard Weight HingeSTK StrikeSB Surface BoltS-HDWE Surface HardwareTAPPL Tap PlateTR Temperature RiseT/L Top LeafUL Underwriters LaboratoriesURT UrethaneUNIFIT Metal Replacement DoorsUNIV UniversalV Vision LiteV-ROD Vertical RodVIEW ViewerVD VonDuprinW/O WithoutWD WoodWH Warnock HerseyWMA Wire Masonry AnchorWOPOA Welded on Prepared Opening AnchorWSA Wood Stud AnchorWT WeightWD-STUD Wood Stud478 4-7/8” Strike
EXAMPLES:For doors with panel in place (PIP), the description will read 22x33G C/O-PIP.For doors with the vision insert (GBO) or louver installed, the description will read 22x33G or 24x24L.For doors with cutout and remove panel, the description will read 22x33G C/O-RPL.Please note that for steel stiffened doors both the vision insert (GBO) and louver cutouts will receive reinforcing channels unless otherwise instructed.
Door and Frame Sizes are Designated as Follows:
30 = 3’0”310 = 3’10”70 = 7’0”
710 = 7’10”100 = 10’0”
3070 = 3’0” Wide x 7’0” High Nominal Sizes, Width and Height
Abbreviations continued
Effective April 4, 2020
5
Weights
Door Weights
Size DP 20 DP18 DL 20 DL 18 DL 16 DE 14DL 18 Steel
Stiffened
DL 16 Steel
Stiffened
DE 14 Steel
Stiffened2068 N/A N/A 49 62 76 84 78 98 1062468 53 70 57 72 89 99 91 115 1242668 57 75 61 77 95 106 98 123 1332868 61 80 65 82 102 113 104 131 14121068 65 85 69 87 108 120 111 139 503068 69 90 73 92 114 127 117 148 1593468 76 101 81 103 127 141 130 164 1773668 80 106 86 108 133 148 137 172 1863868 84 111 90 113 140 155 143 180 19431068 88 116 94 118 146 162 150 189 2034068 91 121 98 123 152 169 156 197 2125068 N/A N/A N/A 161 187 246 206 232 2952070 N/A N/A 51 65 80 89 82 103 1112470 56 74 60 75 93 103 96 121 1302670 60 79 64 81 100 111 102 129 1392870 64 84 68 86 107 118 109 138 14821070 68 90 72 92 113 126 116 146 1583070 72 95 77 97 120 133 123 155 1673470 N/A 100 N/A 102 127 140 130 164 1763670 N/A 111 N/A 113 140 155 143 181 1953870 N/A 116 N/A 119 147 163 150 189 20431070 N/A 121 N/A 124 153 170 157 198 2134070 N/A 127 N/A 129 160 177 164 207 2235070 N/A N/A N/A 169 196 258 219 241 3292072 N/A N/A N/A 66 82 91 84 106 1142472 N/A N/A N/A 77 95 106 98 123 1332672 N/A N/A N/A 83 102 113 105 132 1422872 N/A N/A N/A 88 109 121 112 141 15221072 N/A N/A N/A 94 116 129 119 150 1613072 N/A N/A N/A 99 123 136 126 159 1713472 N/A N/A N/A 110 136 151 140 176 1903672 N/A N/A N/A 116 143 159 147 185 1993872 N/A N/A N/A 121 150 166 154 194 20931072 N/A N/A N/A 124 153 170 157 198 2134072 N/A N/A N/A 132 164 182 168 212 2285072 N/A N/A N/A 173 201 265 221 249 3132080 N/A N/A N/A 74 91 101 94 118 1272480 N/A N/A N/A 86 107 118 109 138 1482680 N/A N/A N/A 92 114 127 117 148 1592880 N/A N/A N/A 99 122 135 125 157 17021080 N/A N/A N/A 105 130 144 133 167 1803080 N/A N/A N/A 111 137 152 141 177 1913480 N/A N/A N/A 123 152 169 156 197 2123680 N/A N/A N/A 129 160 177 164 207 2233880 N/A N/A N/A 136 168 186 172 217 23331080 N/A N/A N/A 142 175 194 1280 226 2444080 N/A N/A N/A 148 183 203 187 236 2545080 N/A N/A N/A 192 223 294 247 278 349
Effective April 4, 2020
6
Weig
hts
Frame Size 5 3/4 6 3/4 7 3/4 8 3/4 10 3/4 12 3/4
2068 35 38 41 44 50 552468 36 39 42 45 51 562668 36 39 42 45 51 572868 37 40 43 46 52 5821068 37 40 43 46 52 583068 37 40 43 46 52 593468 38 41 44 47 53 603668 38 41 45 48 54 603868 39 42 45 48 54 6131068 39 42 45 49 55 614068 39 43 46 49 55 624868 42 45 48 52 58 655068 42 45 49 52 59 665468 43 46 50 53 60 675868 43 47 50 54 61 686068 44 47 51 54 61 686868 45 49 52 56 63 717068 45 49 53 57 64 717468 46 50 54 57 65 727868 47 51 54 58 66 738068 47 51 55 59 66 7410068 53 57 61 66 74 832070 37 40 43 46 52 582470 37 40 43 46 52 592670 38 41 44 47 53 592870 38 41 44 47 53 6021070 38 41 45 48 54 603070 39 42 45 48 54 613470 39 43 46 49 55 623670 40 43 46 49 56 623870 40 43 47 50 56 6331070 40 44 47 50 57 644070 41 44 47 51 57 644870 43 47 50 53 60 675070 43 47 50 54 61 685470 44 48 51 55 62 695870 45 48 52 56 63 706070 45 49 52 56 63 716870 46 50 54 58 65 737070 47 51 54 58 66 737470 48 51 55 59 67 757870 48 52 56 60 68 768070 49 53 56 60 68 7610070 54 59 63 67 76 85
Frame Size 5 3/4 6 3/4 7 3/4 8 3/4 10 3/4 12 3/4
2072 37 40 43 46 52 592472 38 41 44 47 53 602672 38 41 45 48 54 602872 39 42 45 48 54 6121072 39 42 45 49 55 613072 39 43 46 49 55 623472 40 43 47 50 56 633672 40 44 47 50 57 643872 41 44 47 51 57 6431072 41 44 48 51 58 654072 41 45 48 52 58 654872 44 47 51 54 61 685072 44 48 51 55 62 695472 45 48 52 56 63 705872 45 49 53 57 64 716072 46 50 53 57 64 726872 47 51 55 59 66 747072 48 51 55 59 67 757472 48 52 56 60 68 767872 49 53 57 61 69 778072 49 53 57 61 69 7710072 55 59 64 68 77 862080 42 45 48 52 58 652480 42 46 49 53 59 662680 43 46 50 53 60 672880 43 47 50 53 60 6721080 43 47 50 54 61 683080 44 47 51 54 61 683480 44 48 52 55 62 703680 45 48 52 56 63 703880 45 49 52 56 63 7131080 45 49 53 57 64 714080 46 50 53 57 64 724880 48 52 56 60 67 755080 49 53 57 61 68 765480 50 54 57 61 69 775880 50 54 58 62 70 786080 51 55 59 63 71 796880 52 57 61 65 73 827080 53 57 62 66 74 837480 54 58 62 67 75 847880 54 59 63 68 76 858080 55 60 64 68 77 8610080 59 64 69 74 83 93
ME Series 16 Gage Frame Weights
Effective April 4, 2020
7
WeightsFrame
Size 5 3/4 6 3/4 7 3/4 8 3/4 10 3/4 12 3/4
2068 44 48 51 55 62 692468 45 49 52 56 63 712668 45 49 53 57 64 722868 46 50 53 57 65 7221068 46 50 54 58 65 733068 47 50 54 58 66 743468 47 51 55 59 67 753668 48 52 56 60 68 763868 48 52 56 60 68 7731068 49 53 57 61 69 774068 49 53 57 62 70 784868 52 56 60 65 73 825068 52 57 61 65 74 825468 53 58 62 66 75 845868 54 59 63 67 76 856068 55 59 64 68 77 866868 56 61 66 70 79 897068 57 61 66 71 80 897468 58 62 67 72 81 917868 58 63 68 73 83 928068 59 64 69 74 83 9310068 66 71 77 82 93 1042070 46 50 53 57 65 722470 47 50 54 58 66 742670 47 51 55 59 67 742870 47 51 55 59 67 7521070 48 52 56 60 68 763070 48 52 56 60 68 773470 49 53 57 62 70 783670 50 54 58 62 70 793870 50 54 58 63 71 7931070 51 55 59 63 72 804070 51 55 59 64 72 814870 54 58 63 67 76 855070 54 59 63 67 76 855470 55 60 64 69 78 875870 56 60 65 70 79 886070 56 61 66 70 79 896870 58 63 68 72 82 927070 58 63 68 73 83 927470 59 64 69 74 84 947870 60 65 70 75 85 958070 61 66 71 76 86 9610070 68 73 79 85 96 107
Frame Size 5 3/4 6 3/4 7 3/4 8 3/4 10 3/4 12 3/4
2072 47 50 54 58 66 742472 47 51 55 59 67 752672 48 52 56 60 68 762872 48 52 56 60 68 7721072 49 53 57 61 69 773072 49 53 57 62 70 783472 50 54 58 63 71 793672 51 55 59 63 72 803872 51 55 59 64 72 8131072 51 56 60 64 73 814072 52 56 60 65 73 824872 55 59 64 68 77 865072 55 60 64 69 78 875472 56 60 65 70 79 885872 57 61 66 71 80 896072 57 62 67 71 81 906872 59 64 69 74 83 937072 59 64 69 74 84 947472 60 65 70 75 85 957872 61 66 71 76 86 968072 62 67 72 77 87 9710072 69 74 80 86 97 1082080 52 56 60 65 73 822480 53 57 61 66 74 832680 53 58 62 66 75 842880 54 58 63 67 76 8521080 54 59 63 67 76 853080 55 59 64 68 77 863480 55 60 65 69 78 873680 56 60 65 70 79 883880 56 61 66 70 79 8931080 57 61 66 71 80 894080 57 62 67 71 81 904880 60 65 70 75 84 945080 61 66 71 76 86 955480 62 67 72 77 87 975880 63 68 73 78 88 986080 63 69 74 79 89 1006880 65 71 76 81 92 1027080 66 71 77 82 93 1047480 67 72 78 83 94 1057880 68 73 79 84 96 1078080 69 74 80 86 97 10810080 74 80 86 92 104 116
ME Series 14 Gage Frame Weights
Effective April 4, 2020
8
Weig
hts MH Series 16 Gage Frame Weights
Frame Size 5 7/8 6 1/4 7 1/8 8 1/4 9
2068 38 38 41 44 502468 36 39 42 45 512668 36 39 42 45 512868 37 40 43 46 5221068 37 40 43 46 523068 37 40 43 46 523468 38 41 44 47 533668 38 41 45 48 543868 39 42 45 48 5431068 39 42 45 49 554068 39 43 46 49 554868 42 45 48 52 585068 42 45 49 52 595468 43 46 50 53 605868 43 47 50 54 616068 44 47 51 54 616868 45 49 52 56 637068 45 49 53 57 647468 46 50 54 57 657868 47 51 54 58 668068 47 51 55 59 6610068 53 57 61 66 742070 37 40 43 46 522470 37 40 43 46 522670 38 41 44 47 532870 38 41 44 47 5321070 38 41 45 48 543070 39 42 45 48 543470 39 43 46 49 553670 40 43 46 49 563870 40 43 47 50 5631070 40 44 47 50 574070 41 44 47 51 574870 43 47 50 53 605070 43 47 50 54 615470 44 48 51 55 625870 45 48 52 56 636070 45 49 52 56 636870 46 50 54 58 657070 47 51 54 58 667470 48 51 55 59 677870 48 52 56 60 688070 49 53 56 60 68
Frame Size 5 7/8 6 1/4 7 1/8 8 1/4 9
2072 37 40 43 46 522472 38 41 44 47 532672 38 41 45 48 542872 39 42 45 48 5421072 39 42 45 49 553072 39 43 46 49 553472 40 43 47 50 563672 40 44 47 50 573872 41 44 47 51 5731072 41 44 48 51 584072 41 45 48 52 584872 44 47 51 54 615072 44 48 51 55 625472 45 48 52 56 635872 45 49 53 57 646072 46 50 53 57 646872 47 51 55 59 667072 48 51 55 59 677472 48 52 56 60 687872 49 53 57 61 698072 49 53 57 61 6910072 55 59 64 68 772080 42 45 48 52 582480 42 46 49 53 592680 43 46 50 53 602880 43 47 50 53 6021080 43 47 50 54 613080 44 47 51 54 613480 44 48 52 55 623680 45 48 52 56 633880 45 49 52 56 6331080 45 49 53 57 644080 46 50 53 57 644880 48 52 56 60 675080 49 53 57 61 685480 50 54 57 61 695880 50 54 58 62 706080 51 55 59 63 716880 52 57 61 65 737080 53 57 62 66 747480 54 58 62 67 757880 54 59 63 68 768080 55 60 64 68 77
Effective April 4, 2020
9
Weights
SE & SH Series 16 Gage Stick Weights
SE Series
Stick Part 5 3/4 6 3/4 7 3/4 8 3/4 10 3/4 12 3/4Blank Jamb 10' 3" 21 23 25 27 30 34Filler With Stop 10' 3" 12 14 16 18 21 25
Filler Without Stop 10' 3" 9 11 12 14 18 22Blank Jamb 4" Face 10' 3" 29 30 32 34 38 426" Face Sill 10’ 3” 41 43 45 47 52 568" Face Sill 10’ 3” 50 52 54 56 60 6410" Face Sill 10’ 3” 58 60 62 64 68 7212" Face Sill 10’ 3” 66 68 70 72 77 81Cased Open Blank Jamb 10' 3" 19 21 23 24 28 32Double Egress Blank Jamb 10' 3" 22 24 26 28 31 35Blank Mull 10' 3" 34 36 38 40 43 47
Blank Mull 6' 8" 22 23 25 26 28 31Blank Mull 7' 0" 23 25 26 27 30 32Blank Mull 7' 2" 24 25 26 28 30 33Blank Mull 8' 0" 27 28 30 31 34 372 Way Corner Post 10' 3" 49 51 53 54 58 623 Way Corner Post 10' 3" 50 52 54 55 59 63
SH Series
Stick Part 5 7/8 6 1/4 7 1/8 8 3/4 9Blank Jamb 10' 3" 21 22 24 26 27
SE Series 14 Gage Stick Weights
Stick Part 5 3/4 6 3/4 7 3/4 8 3/4 10 3/4 12 3/4Blank Jamb 10’ 3” 27 29 32 34 39 43Filler With Stop 10’ 3” 15 18 20 22 27 32Filler Without Stop 10’ 3” 11 13 16 18 23 27Blank Jamb 4” Face 10’ 3” 36 39 41 43 48 536” Face Sill 10’ 3” 52 54 57 59 64 708” Face Sill 10’ 3” 62 64 67 70 75 8010” Face Sill 10’ 3” 72 75 77 80 85 9012” Face Sill 10’ 3” 82 85 88 90 95 100Cased Open Blank Jamb 10’ 3” 24 26 29 31 36 40Double Egress Blank Jamb 10’ 3” 28 30 33 35 40 44Blank Mull 10’ 3” 43 46 48 50 55 60Blank Mull 6’ 8” 28 30 31 33 36 39Blank Mull 7’ 0” 30 31 33 34 38 41Blank Mull 7’ 2” 30 32 33 35 38 42Blank Mull 8’ 0” 34 36 37 39 43 472 Way Corner Post 10’ 3” 62 64 67 69 74 783 Way Corner Post 10’ 3” 63 65 68 70 75 79
Effective April 4, 2020
10
Weig
hts Size STC 50 HM Door
FEMA 320/361
Door
8 3/4” Depth FEMA Frame
Bullet Resistant
Level 3 Door
8 3/4” Depth Bullet
Resistant Level 3 Frame
Bullet Resistant
Level 8 Door
8 3/4” Depth Bullet
Resistant Level 8 Frame
1/16” Lead Lined Door
8 3/4” Depth 1/16” Lead Lined Frame
2068 130 125 56 143 66 275 86 132 78
2468 151 146 57 167 67 321 88 154 79
2668 162 156 58 179 68 344 89 165 80
2868 173 167 58 190 69 367 89 176 81
21068 183 177 59 202 69 389 90 187 82
3068 194 188 60 214 70 412 91 198 83
3468 216 208 61 238 72 458 93 220 84
3668 227 219 61 250 72 481 94 231 85
3868 237 229 62 262 73 504 95 242 86
31068 248 240 63 274 74 527 96 253 87
4068 259 250 63 286 74 550 97 264 88
5068 N/A N/A N/A 357 79 687 103 330 93
2070 136 131 58 150 69 289 89 139 81
2470 159 153 60 175 70 337 91 162 83
2670 170 164 60 187 71 361 92 173 84
2870 181 175 61 200 72 385 93 185 84
21070 193 186 61 212 72 409 94 196 85
3070 204 197 62 225 73 433 95 208 86
3470 227 219 63 250 74 481 97 231 88
3670 238 230 64 262 75 505 98 243 89
3870 249 241 64 275 76 529 99 254 89
31070 261 252 65 287 77 553 100 266 90
4070 272 263 66 300 77 577 101 277 91
5070 N/A N/A N/A 375 82 722 106 347 96
2072 139 134 60 154 70 296 91 142 83
2472 162 157 61 179 72 345 93 166 84
2672 174 168 61 192 72 369 94 177 85
2872 186 179 62 205 73 394 95 189 86
21072 197 190 63 218 74 419 96 201 87
3072 209 202 63 230 74 443 97 213 88
3472 232 224 64 256 76 492 99 237 89
3672 244 235 65 269 77 517 100 248 90
3872 255 246 66 282 77 542 101 260 91
31072 267 258 66 294 78 566 102 272 92
4072 278 269 67 307 79 591 103 284 93
5072 N/A N/A N/A 384 83 739 108 355 98
2080 155 150 66 171 77 330 101 158 91
2480 181 175 67 200 79 385 103 185 93
2680 194 188 67 214 79 412 103 198 94
2880 207 200 68 229 80 440 104 211 95
21080 220 213 69 243 81 467 105 224 95
3080 233 225 69 257 82 495 106 238 96
3480 259 250 71 286 83 550 108 264 98
3680 272 263 71 300 84 577 109 277 99
3880 285 278 72 314 84 605 110 291 100
31080 298 288 72 329 85 632 111 304 100
4080 311 300 73 343 86 660 112 317 101
5080 N/A N/A N/A 429 92 825 119 N/A N/AEffective
April 4, 2020
11
Thickness – 1 3/4”
Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4”.
Hinge Edge & Reinforcement – Hinge edge is square edge and includes reversible hinge fi ller plate. Standard 7 gage hinge reinforcement.
Lock Edge – Square edge, 14ga reinf. for mortise or 16ga for cylindrical locks. Compliant with ANSI A1115 standards.
Edge Seams– Visible seam
Top Channel – Top Channel is a 16 gage fl ush channel, projection welded at a maximum 2 1/2” on center. (Optional - Inverted)
Bottom Channel – Bottom Channel is an inverted 16 gage channel, projection welded at a maximum 2 1/2” on center.
Face Skins – 20 gage or 18 gage, Cold Rolled Steel or A60 Galvannealed
Closer Reinforcement (Optional) - 14 gage standard
Size Availability – Please see price sheet for sizes as indicated.
SDI 100 Level/Model – Level 1 Model 1 (Standard Duty, minimum 20 gage, hollow steel composite) Level 2 Model 1 or 2 (Heavy Duty, minimum 18 gage, hollow steel composite)
Universal Hinge Prep – Allowing for an easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Square edge, non-handed
Honeycomb Core
Cores Available for DP Doors
16 gage cylindrical lock rein-forcement with provisions for Gov’t Series 160 or 161 cylindri-cal lock sets ( 2-3/4” backset) and ANSI A115.2 lock front
Polystyrene Core
• Effi cient in 95% of all weather conditions
• STC rating 38 Inoperable Slab
14 gage mortise lock reinforcement with provisions for Gov’t Series 86 mortise lockset and ANSI A115.1 lock front
refer to technical data sheet No. 101 &101a
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
DP SeriesHoneycomb/Polystyrene
Effective April 4, 2020
Hinge edge with 7 gage reinforcements.Shown: 4-1/2” hinges
16 gage steel channel (standard inverted)Approximate depth 9/16”
16 gage steel channel (standard fl ush) When closer reinforcement requested 14 gage standard
Lock Edge of Pan
Bottom Channel Top Channel
• Effi cient in extreme weather conditions
• STC rating 35 Inoperable Slab
12 Effective April 4, 2020
DP Honeycomb Core 1 3/4” Thick
DP Embossed 1 3/4” Thick
Width Height 20 GA 18 GA
"2'6"" and 2'8"""
6'8" $465 $545
7'0" $485 $561
3'0"6'8" $467 $529 7'0" $485 $546 8'0" N/A $696
3'8"6'8" N/A $609 7'0" N/A $641
4'0"6'8" N/A $692 7'0" N/A $693
Pattern Width Height 20 18
"2-Panel HD P2"
3'-0"
6'-8" N/A $747 7'-0" N/A $763
8'-0" N/A $913
6-Panel 3'-0"6'-8" N/A $747
7'-0" N/A $763
"6-Panel (8'-0"")" 3'-0" 8'-0" N/A $913
DP Styrene Core 1 3/4” Thick
Width Height 20 GA 18 GA
"2'6"" and 2'8"""
6'8" $497 $577
7'0" $517 $593
3'0"6'8" $499 $561 7'0" $517 $578 8'0" N/A $728
3'8"6'8" N/A $641 7'0" N/A $673
4'0"6'8" N/A $724 7'0" N/A $725
13
Steel Types
Cold Rolled Steel Included
A60 Galvanneal $ 85
Hinge Preparations
Special Hinge Locations (vertical) No charge
4 1/2" Heavy Weight Hinge Prep No charge
Additional Hinge Prep (per hinge) $19
3/16” (7 gage) Hinge Reinforcements (per hinge) Included
Closer Preparations
Closer Reinforcement - 14 GA x 18” x 6” $ 30
Label Preparations
Mark Numbers No Charge
U.L. Mylar Label (standard unless specified otherwise) **LIMITATIONS**
$17
U.L. Metal Label **LIMITATIONS** $32
Warnock Hersey Metal Label **LIMITATIONS** $32
Hurricane *Ref Eng Section for details **LIMITATIONS**
Effective April 4, 2020
14
Strike / Lock Preparations
Special Lock Location (vertical) No charge
Cylindrical or Cyl-DT (Lever) No charge
Govt 86 Edge and Panel prep No charge
Govt 86 Edge prep only No charge
Cylindrical Dead Lock prep (min distance between 7”) $ 58
Rim Reinforcement only $40
Special Constructions
Special Width N/A
Special Height N/A
3/4” Undercuts No Charge
Inverted Top Channel No Charge
Flush Bottom Channel No Charge
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No Charge
ANSI 4 7/8" Strike Prep - Requires the application of a Z astragal with tap plates
$47
Attaching Astragal (includes Astragal) $70
Flush Bolt - edge, top and bottom prep - ANSI A115.4 (DP Series door requiring FB prep accomodated by the application of Z astragal with tap plates)
$68
Surface Bolt Reinforce only $31
Finish Preparations
Second Coat of Primer $ 97
Finish Paint Setup Charge (never waived) $ 1,214
Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Effective April 4, 2020
15
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
16
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
17
Cutout only Options (Glass Kits & Louvers)
Up to 100 inch2
Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place $ 69 $ 69 N/A Cutout only $ 69 $ 69 N/A Cutout with reinforcement $ 233 $ 233 $ 257 Round Cutout only (no reinf) $ 256 $ 256 N/A
Honeycomb Doors
See Engineering Section for further options and / or details
HONEYCOMB DOOR 1 3/4” THICK
Width Height 20 GA 18 GA 16 GA 14 GA
" 1'6"" Thru 2'8"" "
6' 8" $614 $701 $843 $1,242
7' 0" $638 $730 $869 $1,276
7' 2" N/A $782 $902 $1,293 8' 0" N/A $960 $1,095 $1,455 9' 0" N/A $1,113 $1,271 $1,682 10' 0" N/A $1,184 $1,342 $1,754
" Over 2'8"" thru 3'0"" "
6' 8" $641 $705 $856 $1,203
7' 0" $650 $729 $854 $1,235 7' 2" N/A $805 $929 $1,293 8' 0" N/A $985 $1,129 $1,469 9' 0" N/A $1,131 $1,288 $1,698 10' 0" N/A $1,202 $1,360 $1,769
" Over 3'0"" thru 3'6"" "
6' 8" N/A $851 $1,000 $1,352 7' 0" N/A $879 $1,015 $1,378 7' 2" N/A $907 $1,051 $1,414 8' 0" N/A $1,103 $1,234 $1,586 9' 0" N/A $1,252 $1,430 $1,820 10' 0" N/A $1,323 $1,503 $1,892
" Over 3'6"" thru 4'0"" "
6' 8" N/A $933 $1,077 $1,448 7' 0" N/A $971 $1,112 $1,480 7' 2" N/A $1,021 $1,181 $1,514 8' 0" N/A $1,189 $1,302 $1,654 9' 0" N/A $1,323 $1,514 $1,892 10' 0" N/A $1,394 $1,588 $1,964
20 GA 18 GA 16 GA 14 GA
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed $ 183 $ 271 N/ACutout with Kit and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 gage doors)
$ 602 $ 690 $ 760
Sunburst Kit (1/2” glass included)
$ 441 N/A N/A
Muntin Bar (each) $ 118 $ 118 $ 118 Galvanized Kit Add $ 118 $ 118 $ 118 Glass Pocket Add (other than 1/4” )
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Types
Cold Rolled Steel IncludedA60 Galvanneal $ 85 G90 Galvanized (available 14 & 16 gage only) $ 354
Hinge Preparations
Special Hinge Locations No Charge4 1/2" Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195" Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no conduit, no wiring)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5" No ChargeSectional Trim Prep (mortise lock w/function holes) $ 56Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise Exit Device Reinforcement Only $ 29 Mortise Exit Device Reinforcement with Function Prep $ 67Surface Vertical Rod Reinforcement only $ 65Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481Exit Alarm Reinforcement only $ 50 Inset Exit Device (14 and 16 gage doors only) $ 544 Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - less than 3/8” price as next larger door height
No Charge
Inverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door (4) 4.5 hinge preps x (1) 161 lock prep $ 70Unifit Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) N/A in 14 gage $ 23 10 Gage Hinge and 14 Gage Lock Channels DE Series (standard on 14 gage door)
$ 122
1 3/8” Thick Door - DE Series / See Engineering for details
$ 122
Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 47 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 126
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Louver Options
12” x 12” $ 314 18” x 12” $ 356 24” x 12” $ 42024” x 18” $ 474 24” x 24” $ 578 24” x 60” $ 1198 Galvanized Louver Add $ 42 Fusible Link Louver Add $ 316
NOTE: Prices based on Republic standard louver
Effective April 4, 2020
Louver Installed No ReinfLouver Installed No ReinfLouver Installed No ReinfLouver Installed No ReinfLouver Installed No ReinfLouver Installed No Reinf
18
Cutout only Options (Glass Kits & Louvers)
Up to 100 inch2
Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place $ 69 $ 69 N/A Cutout only $ 69 $ 69 N/A Cutout with reinforcement $ 233 $ 233 $ 257 Round Cutout only (no reinf) $ 256 $ 256 N/A
Honeycomb Doors
See Engineering Section for further options and / or details
HONEYCOMB DOOR 1 3/4” THICK
Width Height 20 GA 18 GA 16 GA 14 GA
" 1'6"" Thru 2'8"" "
6' 8" $614 $701 $843 $1,242
7' 0" $638 $730 $869 $1,276
7' 2" N/A $782 $902 $1,293 8' 0" N/A $960 $1,095 $1,455 9' 0" N/A $1,113 $1,271 $1,682 10' 0" N/A $1,184 $1,342 $1,754
" Over 2'8"" thru 3'0"" "
6' 8" $641 $705 $856 $1,203
7' 0" $650 $729 $854 $1,235 7' 2" N/A $805 $929 $1,293 8' 0" N/A $985 $1,129 $1,469 9' 0" N/A $1,131 $1,288 $1,698 10' 0" N/A $1,202 $1,360 $1,769
" Over 3'0"" thru 3'6"" "
6' 8" N/A $851 $1,000 $1,352 7' 0" N/A $879 $1,015 $1,378 7' 2" N/A $907 $1,051 $1,414 8' 0" N/A $1,103 $1,234 $1,586 9' 0" N/A $1,252 $1,430 $1,820 10' 0" N/A $1,323 $1,503 $1,892
" Over 3'6"" thru 4'0"" "
6' 8" N/A $933 $1,077 $1,448 7' 0" N/A $971 $1,112 $1,480 7' 2" N/A $1,021 $1,181 $1,514 8' 0" N/A $1,189 $1,302 $1,654 9' 0" N/A $1,323 $1,514 $1,892 10' 0" N/A $1,394 $1,588 $1,964
20 GA 18 GA 16 GA 14 GA
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed $ 183 $ 271 N/ACutout with Kit and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 gage doors)
$ 602 $ 690 $ 760
Sunburst Kit (1/2” glass included)
$ 441 N/A N/A
Muntin Bar (each) $ 118 $ 118 $ 118 Galvanized Kit Add $ 118 $ 118 $ 118 Glass Pocket Add (other than 1/4” )
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Types
Cold Rolled Steel IncludedA60 Galvanneal $ 85 G90 Galvanized (available 14 & 16 gage only) $ 354
Hinge Preparations
Special Hinge Locations No Charge4 1/2" Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195" Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no conduit, no wiring)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5" No ChargeSectional Trim Prep (mortise lock w/function holes) $ 56Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise Exit Device Reinforcement Only $ 29 Mortise Exit Device Reinforcement with Function Prep $ 67Surface Vertical Rod Reinforcement only $ 65Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481Exit Alarm Reinforcement only $ 50 Inset Exit Device (14 and 16 gage doors only) $ 544 Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - less than 3/8” price as next larger door height
No Charge
Inverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door (4) 4.5 hinge preps x (1) 161 lock prep $ 70Unifit Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) N/A in 14 gage $ 23 10 Gage Hinge and 14 Gage Lock Channels DE Series (standard on 14 gage door)
$ 122
1 3/8” Thick Door - DE Series / See Engineering for details
$ 122
Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 47 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 126
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Louver Options
12” x 12” $ 314 18” x 12” $ 356 24” x 12” $ 42024” x 18” $ 474 24” x 24” $ 578 24” x 60” $ 1198 Galvanized Louver Add $ 42 Fusible Link Louver Add $ 316
NOTE: Prices based on Republic standard louver
Effective April 4, 2020
Louver Installed No ReinfLouver Installed No ReinfLouver Installed No ReinfLouver Installed No ReinfLouver Installed No ReinfLouver Installed No Reinf
19
Front outside
Back outside
DL/DE SeriesInsulatedrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by ¼” in width and 7/8” in height. Standard undercut is 3/4”
Core - 1 lb. density Polystyrene (standard) / Optional 2 lb. Polyurethane core Polystyrene Core – “U” Factor = 0.41 / STC = 35 / “R” Factor = 2.43 (per ASTM C1363)
Polyurethane Core – “U” Factor = 0.39 / STC = 33 / “R” Factor = 2.56 (per ASTM C1363)
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” )
16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
(continued on back)
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Face Skins – 20 gage, 18 gage, 16 gage or 14 gage( DE Series) (cold rolled steel or A60 galvannealed) *G90 galvanized available 16 & 14 gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey (not available in urethane)
Edge Seam Construction – Visible seam is standard. Continuously welded or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Insulated Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
20
Front outside
Back outside
DL/DE SeriesInsulatedrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by ¼” in width and 7/8” in height. Standard undercut is 3/4”
Core - 1 lb. density Polystyrene (standard) / Optional 2 lb. Polyurethane core Polystyrene Core – “U” Factor = 0.41 / STC = 35 / “R” Factor = 2.43 (per ASTM C1363)
Polyurethane Core – “U” Factor = 0.39 / STC = 33 / “R” Factor = 2.56 (per ASTM C1363)
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” )
16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
(continued on back)
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Face Skins – 20 gage, 18 gage, 16 gage or 14 gage( DE Series) (cold rolled steel or A60 galvannealed) *G90 galvanized available 16 & 14 gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey (not available in urethane)
Edge Seam Construction – Visible seam is standard. Continuously welded or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Insulated Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
21
Insulated Doors
Cutout only Options
Up to 100 inch2
Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place $ 69 $ 69 N/A Cutout only $ 69 $ 69 N/A Cutout with reinforcement $ 233 $ 233 $ 257 Round Cutout only (no reinf) $ 256 $ 256 N/A
See Engineering Section for further options and / or details
Polystyrene Door 1 3/4” Thick
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed $ 183 $ 271 N/ACutout with Kit and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 gage doors)
$ 602 $ 690 $ 760
Sunburst Kit (1/2” glass included)
$ 441 N/A N/A
Muntin Bar (each) $ 118 $ 118 $ 118 Galvanized Kit Add $ 118 $ 118 $ 118 Glass Pocket Add (other than 1/4” )
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Types
Cold Rolled Steel IncludedA60 Galvanneal $ 85 G90 Galvanized (available 14 & 16 gage only) $ 354
Hinge Preparations
Special Hinge Locations No Charge4 1/2" Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195" Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no wiring included, no conduit)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5" No ChargeSectional Trim Prep (mortise lock w/function holes) $ 56Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise ED Reinforcement Only $ 29 Mortise ED Reinforcement with Function Prep $ 52Surface Vertical Rod Reinforcement only $ 65Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481Exit Alarm Reinforcement only $ 50 Inset Exit Device (14 and 16 gage doors only) $ 544 Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - under 3/8” price next larger size No ChargeInverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door (4) 4.5 hinge preps x (1) 161 lock prep $ 70Unifit Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) N/A in 14 gage $ 23 10 Gage Hinge and 14 Gage Lock Channels DE Series (standard on 14 gage door)
$ 122
1 3/8” Thick Door - DE Series / See Engineering for details
$ 122
Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 46 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 126
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Louver Options
12” x 12” Louver Installed No Reinf $ 314 18” x 12” Louver Installed No Reinf $ 356 24” x 12” Louver Installed No Reinf $ 42024” x 18” Louver Installed No Reinf $ 474 24” x 24” Louver Installed No Reinf $ 578 24” x 60” Louver Installed No Reinf $ 1198 Galvanized Louver Add $ 42 Fusible Link Louver Add $ 316
NOTE: Prices based on Republic standard louver
Width Height 20 GA 18 GA 16 GA 14 GA
" 1'6"" Thru 2'8"" "
6' 8" $646 $733 $875 $1,274
7' 0" $670 $762 $901 $1,308
7' 2" N/A $814 $934 $1,325 8' 0" N/A $992 $1,127 $1,487 9' 0" N/A $1,145 $1,303 $1,714 10' 0" N/A $1,216 $1,374 $1,786
" Over 2'8"" thru 3'0"" "
6' 8" $673 $737 $888 $1,235
7' 0" $682 $761 $886 $1,267 7' 2" N/A $837 $961 $1,325 8' 0" N/A $1,017 $1,161 $1,501 9' 0" N/A $1,163 $1,320 $1,730 10' 0" N/A $1,234 $1,392 $1,801
" Over 3'0"" thru 3'6"" "
6' 8" N/A $883 $1,032 $1,384 7' 0" N/A $911 $1,047 $1,410 7' 2" N/A $939 $1,083 $1,446 8' 0" N/A $1,135 $1,266 $1,618 9' 0" N/A $1,284 $1,462 $1,852 10' 0" N/A $1,355 $1,535 $1,924
" Over 3'6"" thru 4'0"" "
6' 8" N/A $965 $1,109 $1,480
7' 0" N/A $1,003 $1,144 $1,512 7' 2" N/A $1,053 $1,213 $1,546 8' 0" N/A $1,221 $1,334 $1,686 9' 0" N/A $1,355 $1,546 $1,924 10' 0" N/A $1,426 $1,620 $1,996
Insulated Cores
Polystyrene IncludedPolyurethane (not available for fire rated) $ 173 Temperature Rise (250 Degree) $ 770
Effective April 4, 2020
22
Insulated Doors
Cutout only Options
Up to 100 inch2
Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place $ 69 $ 69 N/A Cutout only $ 69 $ 69 N/A Cutout with reinforcement $ 233 $ 233 $ 257 Round Cutout only (no reinf) $ 256 $ 256 N/A
See Engineering Section for further options and / or details
Polystyrene Door 1 3/4” Thick
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed $ 183 $ 271 N/ACutout with Kit and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 gage doors)
$ 602 $ 690 $ 760
Sunburst Kit (1/2” glass included)
$ 441 N/A N/A
Muntin Bar (each) $ 118 $ 118 $ 118 Galvanized Kit Add $ 118 $ 118 $ 118 Glass Pocket Add (other than 1/4” )
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Types
Cold Rolled Steel IncludedA60 Galvanneal $ 85 G90 Galvanized (available 14 & 16 gage only) $ 354
Hinge Preparations
Special Hinge Locations No Charge4 1/2" Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195" Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no wiring included, no conduit)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5" No ChargeSectional Trim Prep (mortise lock w/function holes) $ 56Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise ED Reinforcement Only $ 29 Mortise ED Reinforcement with Function Prep $ 52Surface Vertical Rod Reinforcement only $ 65Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481Exit Alarm Reinforcement only $ 50 Inset Exit Device (14 and 16 gage doors only) $ 544 Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - under 3/8” price next larger size No ChargeInverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door (4) 4.5 hinge preps x (1) 161 lock prep $ 70Unifit Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) N/A in 14 gage $ 23 10 Gage Hinge and 14 Gage Lock Channels DE Series (standard on 14 gage door)
$ 122
1 3/8” Thick Door - DE Series / See Engineering for details
$ 122
Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 46 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 126
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Louver Options
12” x 12” Louver Installed No Reinf $ 314 18” x 12” Louver Installed No Reinf $ 356 24” x 12” Louver Installed No Reinf $ 42024” x 18” Louver Installed No Reinf $ 474 24” x 24” Louver Installed No Reinf $ 578 24” x 60” Louver Installed No Reinf $ 1198 Galvanized Louver Add $ 42 Fusible Link Louver Add $ 316
NOTE: Prices based on Republic standard louver
Width Height 20 GA 18 GA 16 GA 14 GA
" 1'6"" Thru 2'8"" "
6' 8" $646 $733 $875 $1,274
7' 0" $670 $762 $901 $1,308
7' 2" N/A $814 $934 $1,325 8' 0" N/A $992 $1,127 $1,487 9' 0" N/A $1,145 $1,303 $1,714 10' 0" N/A $1,216 $1,374 $1,786
" Over 2'8"" thru 3'0"" "
6' 8" $673 $737 $888 $1,235
7' 0" $682 $761 $886 $1,267 7' 2" N/A $837 $961 $1,325 8' 0" N/A $1,017 $1,161 $1,501 9' 0" N/A $1,163 $1,320 $1,730 10' 0" N/A $1,234 $1,392 $1,801
" Over 3'0"" thru 3'6"" "
6' 8" N/A $883 $1,032 $1,384 7' 0" N/A $911 $1,047 $1,410 7' 2" N/A $939 $1,083 $1,446 8' 0" N/A $1,135 $1,266 $1,618 9' 0" N/A $1,284 $1,462 $1,852 10' 0" N/A $1,355 $1,535 $1,924
" Over 3'6"" thru 4'0"" "
6' 8" N/A $965 $1,109 $1,480
7' 0" N/A $1,003 $1,144 $1,512 7' 2" N/A $1,053 $1,213 $1,546 8' 0" N/A $1,221 $1,334 $1,686 9' 0" N/A $1,355 $1,546 $1,924 10' 0" N/A $1,426 $1,620 $1,996
Insulated Cores
Polystyrene IncludedPolyurethane (not available for fire rated) $ 173 Temperature Rise (250 Degree) $ 770
Effective April 4, 2020
23
Front outside
Back outside
DL/DE SeriesSteel Stiffened
refer to technical data sheet No. 103
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4”
Core – Fiberglass batting between each stiffener “U” Factor = 0.61 “R” Factor = 1.65(Optional) Polystyrene or polyurethane between stiffeners. Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional 10 gage) Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional 14 gage) (Beveled 1/8” in 2” optional)
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center. Bottom Channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center. Face Skins – 18 gage, 16 gage, or 14 gage (cold rolled steel or A60 galvannealed) *G90 Galvanized available in 16 or 14 gage only
(continued on back)
Stiffener Gage – 20 gage (Optional 18 or 16 gage)
Stiffener Spacing – 6” maximum apart (Varies according to door width)
Stiffener Welding – 5” maximum on center (Vertically)
Closer Reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’10” x 10’0” (Pairs) Max. 9’8” x 10’0” (max. 18 ga – 4’0” x 8’0”)
SDI 100 - Grade/Model – Levels 2-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey (not available in urethane)
Edge Seam Construction – Visible seam (standard), continuously welded seamless or intermittently welded seamless available.
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Cylindrical Lock Prep
Door Hinge Prep
Steel Stiffened Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Grade Model Construction RBP Series
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE418
DL 418, DE418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
24
Front outside
Back outside
DL/DE SeriesSteel Stiffened
refer to technical data sheet No. 103
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4”
Core – Fiberglass batting between each stiffener “U” Factor = 0.61 “R” Factor = 1.65(Optional) Polystyrene or polyurethane between stiffeners. Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional 10 gage) Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional 14 gage) (Beveled 1/8” in 2” optional)
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center. Bottom Channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center. Face Skins – 18 gage, 16 gage, or 14 gage (cold rolled steel or A60 galvannealed) *G90 Galvanized available in 16 or 14 gage only
(continued on back)
Stiffener Gage – 20 gage (Optional 18 or 16 gage)
Stiffener Spacing – 6” maximum apart (Varies according to door width)
Stiffener Welding – 5” maximum on center (Vertically)
Closer Reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’10” x 10’0” (Pairs) Max. 9’8” x 10’0” (max. 18 ga – 4’0” x 8’0”)
SDI 100 - Grade/Model – Levels 2-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey (not available in urethane)
Edge Seam Construction – Visible seam (standard), continuously welded seamless or intermittently welded seamless available.
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Cylindrical Lock Prep
Door Hinge Prep
Steel Stiffened Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Grade Model Construction RBP Series
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE418
DL 418, DE418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
25
Steel Stiffened Doors
Cutout only Options (Glass kits & Louvers)
Up to 100 inch2
Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place N/A N/A N/A Cutout only N/A N/A N/A Cutout with reinforcement $233 $ 233 $ 257 Round Cutout only (no reinf) N/A N/A N/A
Steel Stiffened Door 1 3/4” Thick
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed N/A N/A N/ACutout with Kit and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 gage doors)
$ 602 $ 690 $ 760
Sunburst Kit (1/2” glass included)
N/A N/A N/A
Muntin Bar (each) $ 118 $ 118 $ 118 Galvanized Kit Add $ 118 $ 118 $ 118 Glass Pocket Add (other than 1/4” )
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Types
Cold Rolled Steel (not available in doors over 4’10 wide) IncludedA60 Galvanneal (not available in doors over 4’10 wide) $ 85 G90 Galvanized (available 14 & 16 gage only) $ 354
Hinge Preparations
Special Hinge Locations No Charge4 1/2" Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195" Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no wiring included, no conduit)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5" No ChargeSectional Trim Prep (mortise lock w/function holes) $ 56Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise ED Reinforcement Only $ 29 Mortise ED Reinforcement with Function Prep $ 67Surface Vertical Rod Reinforcement only $ 65Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481Exit Alarm Reinforcement only $ 50 Inset Exit Device (14 and 16 gage doors only) $ 544 Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - under 3/8” price next larger size No ChargeInverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door (4) 4.5 hinge preps x (1) 161 lock prep $ 70Unifit Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) N/A in 14 gage $ 23 10 Gage Hinge and 14 Gage Lock Channels DE Series (standard on 14 gage door)
$ 122
1 3/8” Thick Door DE * See Engineering $ 122 Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 47 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 143
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
NOTE: Polyurethane unavailable as fire rated
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Louver Options
12” x 12” $ 314 18” x 12” $ 356 24” x 12” $ 42024” x 18” $ 474 24” x 24” $ 578 24” x 60” $ 1198 Galvanized Louver Add $ 42 Fusible Link Louver Add $ 316
NOTE: Prices based on Republic standard louver
Width Height 20 GA 18 GA 16 GA 14 GA
" 1'6"" Thru 2'8"" "
6' 8" N/A $937 $1,079 $1,478
7' 0" N/A $966 $1,105 $1,512
7' 2" N/A $1,018 $1,138 $1,529
8' 0" N/A $1,196 $1,331 $1,691
9' 0" N/A $1,349 $1,507 $1,918
10' 0" N/A $1,420 $1,578 $1,990
" Over 2'8"" thru 3'0"" "
6' 8" N/A $941 $1,092 $1,439
7' 0" N/A $965 $1,090 $1,471
7' 2" N/A $1,041 $1,165 $1,529
8' 0" N/A $1,221 $1,365 $1,705
9' 0" N/A $1,367 $1,524 $1,934
10' 0" N/A $1,438 $1,596 $2,005
" Over 3'0"" thru 3'6"" "
6' 8" N/A $1,087 $1,236 $1,588
7' 0" N/A $1,115 $1,251 $1,614
7' 2" N/A $1,143 $1,287 $1,650
8' 0" N/A $1,339 $1,470 $1,822
9' 0" N/A $1,488 $1,666 $2,056
10' 0" N/A $1,559 $1,739 $2,128
" Over 3'6"" thru 4'0"" "
6' 8" N/A $1,169 $1,313 $1,684
7' 0" N/A $1,207 $1,348 $1,716
7' 2" N/A $1,257 $1,417 $1,750
8' 0" N/A $1,425 $1,538 $1,890
9' 0" N/A $1,559 $1,750 $2,128
10' 0" N/A $1,630 $1,824 $2,200
" Over 4'0"" thru 5'0"" "
6' 8" N/A N/A $3,198 $4,038
7' 0" N/A N/A $3,364 $4,121
7' 2" N/A N/A $3,440 $4,224
8' 0" N/A N/A $3,575 $4,379
9' 0" N/A N/A $3,728 $4,531
10' 0" N/A N/A $3,798 $4,601
20 GA 18 GA 16 GA 14 GA
DOORS OVER 4’0 (14 GAGE) CRS ONLY
See Engineering Section for further options and / or details
Cores
20 GA Stiffeners Included 18 GA Stiffeners $ 295 16 GA Stiffeners $ 414 Polystyrene between stiffeners $ 42 Polyurethane between stiffeners (unavailable as fire rated)
$ 278
Effective April 4, 2020
26
Steel Stiffened Doors
Cutout only Options (Glass kits & Louvers)
Up to 100 inch2
Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place N/A N/A N/A Cutout only N/A N/A N/A Cutout with reinforcement $233 $ 233 $ 257 Round Cutout only (no reinf) N/A N/A N/A
Steel Stiffened Door 1 3/4” Thick
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed N/A N/A N/ACutout with Kit and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 gage doors)
$ 602 $ 690 $ 760
Sunburst Kit (1/2” glass included)
N/A N/A N/A
Muntin Bar (each) $ 118 $ 118 $ 118 Galvanized Kit Add $ 118 $ 118 $ 118 Glass Pocket Add (other than 1/4” )
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Types
Cold Rolled Steel (not available in doors over 4’10 wide) IncludedA60 Galvanneal (not available in doors over 4’10 wide) $ 85 G90 Galvanized (available 14 & 16 gage only) $ 354
Hinge Preparations
Special Hinge Locations No Charge4 1/2" Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195" Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no wiring included, no conduit)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5" No ChargeSectional Trim Prep (mortise lock w/function holes) $ 56Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise ED Reinforcement Only $ 29 Mortise ED Reinforcement with Function Prep $ 67Surface Vertical Rod Reinforcement only $ 65Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481Exit Alarm Reinforcement only $ 50 Inset Exit Device (14 and 16 gage doors only) $ 544 Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - under 3/8” price next larger size No ChargeInverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door (4) 4.5 hinge preps x (1) 161 lock prep $ 70Unifit Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) N/A in 14 gage $ 23 10 Gage Hinge and 14 Gage Lock Channels DE Series (standard on 14 gage door)
$ 122
1 3/8” Thick Door DE * See Engineering $ 122 Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 47 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 143
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
NOTE: Polyurethane unavailable as fire rated
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Louver Options
12” x 12” $ 314 18” x 12” $ 356 24” x 12” $ 42024” x 18” $ 474 24” x 24” $ 578 24” x 60” $ 1198 Galvanized Louver Add $ 42 Fusible Link Louver Add $ 316
NOTE: Prices based on Republic standard louver
Width Height 20 GA 18 GA 16 GA 14 GA
" 1'6"" Thru 2'8"" "
6' 8" N/A $937 $1,079 $1,478
7' 0" N/A $966 $1,105 $1,512
7' 2" N/A $1,018 $1,138 $1,529
8' 0" N/A $1,196 $1,331 $1,691
9' 0" N/A $1,349 $1,507 $1,918
10' 0" N/A $1,420 $1,578 $1,990
" Over 2'8"" thru 3'0"" "
6' 8" N/A $941 $1,092 $1,439
7' 0" N/A $965 $1,090 $1,471
7' 2" N/A $1,041 $1,165 $1,529
8' 0" N/A $1,221 $1,365 $1,705
9' 0" N/A $1,367 $1,524 $1,934
10' 0" N/A $1,438 $1,596 $2,005
" Over 3'0"" thru 3'6"" "
6' 8" N/A $1,087 $1,236 $1,588
7' 0" N/A $1,115 $1,251 $1,614
7' 2" N/A $1,143 $1,287 $1,650
8' 0" N/A $1,339 $1,470 $1,822
9' 0" N/A $1,488 $1,666 $2,056
10' 0" N/A $1,559 $1,739 $2,128
" Over 3'6"" thru 4'0"" "
6' 8" N/A $1,169 $1,313 $1,684
7' 0" N/A $1,207 $1,348 $1,716
7' 2" N/A $1,257 $1,417 $1,750
8' 0" N/A $1,425 $1,538 $1,890
9' 0" N/A $1,559 $1,750 $2,128
10' 0" N/A $1,630 $1,824 $2,200
" Over 4'0"" thru 5'0"" "
6' 8" N/A N/A $3,198 $4,038
7' 0" N/A N/A $3,364 $4,121
7' 2" N/A N/A $3,440 $4,224
8' 0" N/A N/A $3,575 $4,379
9' 0" N/A N/A $3,728 $4,531
10' 0" N/A N/A $3,798 $4,601
20 GA 18 GA 16 GA 14 GA
DOORS OVER 4’0 (14 GAGE) CRS ONLY
See Engineering Section for further options and / or details
Cores
20 GA Stiffeners Included 18 GA Stiffeners $ 295 16 GA Stiffeners $ 414 Polystyrene between stiffeners $ 42 Polyurethane between stiffeners (unavailable as fire rated)
$ 278
Effective April 4, 2020
27
refer to technical data sheet No. 104
Door Thickness – 1 3/4” (1 3/8” available in 6-Panel only) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4” Core – 1 to 1.25 lb. density Polystyrene (standard) Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center.
Additional reinforcement plates are provided at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2”)
16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center. Bottom Channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20, 18 or 16 - Faces shall be deep drawn embossed raised panels, both inside and out. (16 gage only available in 6-panel and 4-panel design) Closer Reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – Minimum 2’6” x 6’8”, Maximum 3’6” x 8’0” (maximum 20 gage = 3’0” x 7’0”)
(Optional - 3’0” x 8’0”, 6-Panel design with elongated panel embossments)
Note: 2’6” wide embossed panel doors will have special lock height - not ADA compliant
SDI 100 - Grade/Model – Levels 1-3 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. (Optional) Continuously welded seamless or intermittently welded seamless available. (not available in 20 gage)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Embossed Doors
1 Panel 2 Panel 4 Panel
6 Panel 6 Panel - EGHalf Glass option* Glass by others
2 Panel Arch Top Sunburst(Includes glass)
Standard 6-Panel Embossment
High Def Embossment (1 & 2 Panel Only)
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush (Not applicable)
Seamless (Unavailable)
DL 420
DL 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush (Not applicable)
Seamless
DL 418, DE418
DL 418, DE418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush (Not applicable)
Seamless
DL 416, DE 416
DL 416, DE 416
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Effective April 4, 2020
28
refer to technical data sheet No. 104
Door Thickness – 1 3/4” (1 3/8” available in 6-Panel only) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4” Core – 1 to 1.25 lb. density Polystyrene (standard) Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center.
Additional reinforcement plates are provided at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2”)
16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center. Bottom Channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20, 18 or 16 - Faces shall be deep drawn embossed raised panels, both inside and out. (16 gage only available in 6-panel and 4-panel design) Closer Reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – Minimum 2’6” x 6’8”, Maximum 3’6” x 8’0” (maximum 20 gage = 3’0” x 7’0”)
(Optional - 3’0” x 8’0”, 6-Panel design with elongated panel embossments)
Note: 2’6” wide embossed panel doors will have special lock height - not ADA compliant
SDI 100 - Grade/Model – Levels 1-3 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. (Optional) Continuously welded seamless or intermittently welded seamless available. (not available in 20 gage)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Embossed Doors
1 Panel 2 Panel 4 Panel
6 Panel 6 Panel - EGHalf Glass option* Glass by others
2 Panel Arch Top Sunburst(Includes glass)
Standard 6-Panel Embossment
High Def Embossment (1 & 2 Panel Only)
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush (Not applicable)
Seamless (Unavailable)
DL 420
DL 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush (Not applicable)
Seamless
DL 418, DE418
DL 418, DE418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush (Not applicable)
Seamless
DL 416, DE 416
DL 416, DE 416
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Effective April 4, 2020
29
Embossed Doors
EMBOSSED PATERNS & SIZES
Width Height 18 GA 16 GA
2'-6" Thru 2'-8"
6'-8" $1,006 N/A 7'-0' $1,006 N/A 8'-0' $1,186 N/A
Over 2'-8" Thru 3'-0"
6'-8" $985 N/A 7'-0' $985 N/A 8'-0' $1,186 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,096 N/A 7'-0' $1,125 N/A 8'-0' $1,355 N/A
Width Height 18 GA 16 GA
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A 8'-0' $1,216 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A 8'-0' $1,216 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A 8'-0' $1,386 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A 8'-0' $1,216 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A7'-0' $1,016 N/A 8'-0' $1,216 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A 8'-0' $1,386 N/A
2'-6" Thru 2'-8"
6'-8" $1,006 $1,244 7'-0' $1,006 $1,268
Over 2'-8" Thru 3'-0"
6'-8" $985 $1,244 7'-0' $985 $1,268
Over 3'-0" Thru 3'-6"
6'-8" $1,096 N/A 7'-0' $1,125 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A
2'-6" Thru 2'-8" 8'-0' $1,216 $1,474
Over 2'-8" Thru 3'-0" 8'-0' $1,386 $1,474
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed $ 183 $ 271 N/ACutout with Kit and Reinforcement
$ 347 $ 435 N/A
Republic Integral “Flush” Kit (not available with 20 GA doors)
$ 602 $ 690 N/A
Sunburst Kit (1/2” glass included)
$ 441 N/A N/A
Muntin Bar (each) $ 118 $ 118 N/AGalvanized Kit Add $ 118 $ 118 N/AGlass Pocket Add (other than 1/4” )
$ 183 $ 183 N/A
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Type
Cold Rolled Steel N/AA40 Galvanneal Included
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5” $ 36Sectional Trim Prep (mortise lock w/function holes) $ 56 Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66 Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise ED Reinforcement Only $ 29 Mortise ED Reinforcement with Function Prep $ 67 Surface Vertical Rod Reinforcement only $ 65 Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481 Exit Alarm Reinforcement only $ 50 Inset Exit Device ( 16 gage doors only) Consult Factory Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - under 3/8” price as next larger size No ChargeInverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door $ 70Unifi t Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) $ 23 10 Gage Hinge and 14 Gage Lock Channels (DE Series - standard on 14 gage door)
$ 122
1 3/8” Thick Door (6 Panel only) DE * See Engineering $ 122 Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 47 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 126
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specifi ed otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Cutout only Options (Glass Kits & Louvers)
Up to 100 inch2
Over 100 sq. inches
up to 800 inch2
Over 800 inch2
Panel in Place N/A N/A N/ACutout only $ 69 $ 69 N/A Cutout with reinforcement $ 233 $ 233 N/ARound Cutout only (no reinf) N/A N/A N/A
Effective April 4, 2020
Hinge Preparations
Special Hinge Locations No Charge4 1/2” Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195” Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no wiring included, no conduit)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
P2-Two Panel
P1-One Panel
AP2- Arch 2 - Panel
P4- 4 Panel
6-Panel
PB2- Btm 2 Panel
PB4- 4 Panel
8-0 x 6-Pnl
See Engineering Section for further options and / or details
NOTE: For patterns, sizes or gauges not shown above please contact Customer Care for availability and options. Minimum buys may be required.
30
Embossed Doors
EMBOSSED PATERNS & SIZES
Width Height 18 GA 16 GA
2'-6" Thru 2'-8"
6'-8" $1,006 N/A 7'-0' $1,006 N/A 8'-0' $1,186 N/A
Over 2'-8" Thru 3'-0"
6'-8" $985 N/A 7'-0' $985 N/A 8'-0' $1,186 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,096 N/A 7'-0' $1,125 N/A 8'-0' $1,355 N/A
Width Height 18 GA 16 GA
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A 8'-0' $1,216 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A 8'-0' $1,216 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A 8'-0' $1,386 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A 8'-0' $1,216 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A7'-0' $1,016 N/A 8'-0' $1,216 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A 8'-0' $1,386 N/A
2'-6" Thru 2'-8"
6'-8" $1,006 $1,244 7'-0' $1,006 $1,268
Over 2'-8" Thru 3'-0"
6'-8" $985 $1,244 7'-0' $985 $1,268
Over 3'-0" Thru 3'-6"
6'-8" $1,096 N/A 7'-0' $1,125 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A
2'-6" Thru 2'-8"
6'-8" $1,037 N/A 7'-0' $1,037 N/A
Over 2'-8" Thru 3'-0"
6'-8" $1,016 N/A 7'-0' $1,016 N/A
Over 3'-0" Thru 3'-6"
6'-8" $1,127 N/A 7'-0' $1,157 N/A
2'-6" Thru 2'-8" 8'-0' $1,216 $1,474
Over 2'-8" Thru 3'-0" 8'-0' $1,386 $1,474
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed $ 183 $ 271 N/ACutout with Kit and Reinforcement
$ 347 $ 435 N/A
Republic Integral “Flush” Kit (not available with 20 GA doors)
$ 602 $ 690 N/A
Sunburst Kit (1/2” glass included)
$ 441 N/A N/A
Muntin Bar (each) $ 118 $ 118 N/AGalvanized Kit Add $ 118 $ 118 N/AGlass Pocket Add (other than 1/4” )
$ 183 $ 183 N/A
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Steel Type
Cold Rolled Steel N/AA40 Galvanneal Included
Lock Preparations
Special Lock Location No ChargeSpecial Lock Backset up to 5” $ 36Sectional Trim Prep (mortise lock w/function holes) $ 56 Cylindrical Dead Lock $ 58 Mortise Dead Lock $ 66 Rim Reinforcement only $ 40 Rim Reinforcement with Function Prep $ 52 Mortise ED Reinforcement Only $ 29 Mortise ED Reinforcement with Function Prep $ 67 Surface Vertical Rod Reinforcement only $ 65 Surface Vertical Rod Reinforcement with Function Prep $ 156 Concealed Vertical Rod $ 481 Exit Alarm Reinforcement only $ 50 Inset Exit Device ( 16 gage doors only) Consult Factory Push Pull Reinforcement $ 31
Closer Preparations
Closer Reinforcement $ 30 Concealed Overhead Door Closer, Holder or Stop $ 264
Special Constructions
Undercut - under 3/8” price as next larger size No ChargeInverted Top Channel No ChargeFlush Bottom Channel No ChargeDutch Door $ 70Unifi t Hinge Channel $ 70 Seal Top or Bottom Channel and Finish Smooth each $ 65 Mag Switch / DPS - Hole Only $ 17Mag Switch / DPS - Prep and reinf. $ 130Continuous Welded Edge (not available in 20 gage) $ 191 Bondo Filled Edge $ 90 Beveled Lock Edge (1/8” in 2”) $ 23 10 Gage Hinge and 14 Gage Lock Channels (DE Series - standard on 14 gage door)
$ 122
1 3/8” Thick Door (6 Panel only) DE * See Engineering $ 122 Door Viewer $ 23 Mail Slot $ 183 Automatic Door Bottom (mortise type) $ 227 Conduit / Raceway - no wiring $ 143
Inactive Leaf Preparations
Flush Bolt Embossed Top/Bottom Channel No ChargeCylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike $ 58 Electric Strike (no conduit) $ 106 ASA Strike only $ 47 Attaching Astragal (includes Astragal) $ 70 Flush Bolt Prep (ANSI 115.4) $ 68 Surface Bolt Reinforce only $ 31 Open Back Strike $ 126
Label Preparations
Mark Numbers No ChargeU.L. Mylar Label (standard unless specifi ed otherwise) $ 17 U.L. Metal Label $ 32 Warnock Hersey Metal Label $ 32 Hurricane Label * See Engineering $ 32
Special Finish Preparations
Second Coat of Primer $ 97 Finish Paint Setup Charge (never waived) $1,214 Finish Paint (min. quan. 20 per color) (price includes full carton wrap)
$ 195
Cutout only Options (Glass Kits & Louvers)
Up to 100 inch2
Over 100 sq. inches
up to 800 inch2
Over 800 inch2
Panel in Place N/A N/A N/ACutout only $ 69 $ 69 N/A Cutout with reinforcement $ 233 $ 233 N/ARound Cutout only (no reinf) N/A N/A N/A
Effective April 4, 2020
Hinge Preparations
Special Hinge Locations No Charge4 1/2” Heavy Weight Hinge Prep No ChargeAdditional Hinge Prep (per hinge) $ 195” Standard or Heavy Weight Prep (per hinge) No ChargeElectric Hinge (cutout in one hinge reinf., no wiring included, no conduit)
$ 18
Surface Mounted Hinges (reinforced only) $ 90Continuous Hinge Reinforcement $ 69Special Backset (per hinge) $ 103Power Transfer (no conduit) $ 103
P2-Two Panel
P1-One Panel
AP2- Arch 2 - Panel
P4- 4 Panel
6-Panel
PB2- Btm 2 Panel
PB4- 4 Panel
8-0 x 6-Pnl
See Engineering Section for further options and / or details
NOTE: For patterns, sizes or gauges not shown above please contact Customer Care for availability and options. Minimum buys may be required.
31
Front outside
Back outside
refer to technical data sheet No. 201
Thickness – Made for two basic door thicknesses: 1 3/8” or 1 3/4” (Consult factory for optional thinknesses.)
Gages – 16 or 14 (12 gage available with coped corner connections for welding.)
Faces – 3/4” to 4”
Standard Rabbets – 1 3/8” (actual dimension 1 9/16”); 1 3/4” (actual dimension 1 15/16”). Rabbet dimension is 3/16” greater than the door thickness.
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Size Availability – Maximum Size 5’0” x 10’0” Single; Maximum Size 10’0” x 10’0” Double.
Label Range – maximum fi re rating 180 minute
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Frames for 1 3/8” doors shall have a 11 gage steel hinge reinforcement plate, projection welded with provisions for 3 1/2” x 3 1/2” standard weight template hinges. (Optional - 8” or 10”, 7 gage reinforcement)
(continued on back)
Strike Prep – Frames for 1 3/4” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Frames for 1 3/8” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage projection welded with provision for Universal ANSI A115.3 strike (2 3/4”.)
Hinge Backset – 5/16”
Backbend – 7/16” (Single Return)
Anchors – Sill anchors are included with all ME frames . All other anchors must be ordered separately.
Silencer Prep – 9/32” dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.
Double Heads – Double heads are undersized 1/16” (except for cased open heads, which are nominal).
Mortar Guards – Mortar guards of 26 gage steel shall be welded to each hinge and strike reinforcement plate.
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet, Double Egress, Cased Opening and Kerf. (Special profi les available, consult factory.)
Handing – Frames are handed.
Corner Connection
Standard Sill Anchor
Frame Hinge Prep
Full Profi le Weld
Face Welded
Snap In Universal Anchor
Masonry Wire Anchor
“Z” Anchor
Prepared Opening Anchor(Bolt sold separately)
Masonry “T” Anchor
AddLabel PreparationsMark Numbers No Charge
U.L. Mylar Label (standard unless specifi ed otherwise) $ 17
U.L. Metal Label $ 28
Warnock Hersey Metal Label $ 28
FBC / Florida Bldg Code *Ref Eng Section for details $ 28
Special Finish PreparationsSecond Coat of Primer $ 85
Finish Paint Setup Charge Frame (never waived) $ 1,214
Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 195
NOTE: Finish paint unavailable on welded frames
Add
Anchor OptionsWelded in Prepared Opening Anchor (per anchor) $ 14
Welded in Anchor (per anchor) $ 7
Punch and Dimple Only (per prep) $ 4
NOTE: Frames up to 7’0 quantity of anchors - 6 (max 8 3/4” depth)Frames over 7’0 thru 10’0 quantity of anchors - 8 (max 8 3/4” depth)
Frames over 8 3/4” depth receive double anchor quantity
Add
Special Constructions Add
Special Width (use next larger size) No Charge Special Height (use next larger size) No Charge Communicating (6) 4.5 hinge preps x (2) ASA preps $ 68 Dutch prep (4) 4.5 hinge preps x ASA prep $ 67Cap Top or bottom of Jamb (each) $ 64 Mag Switch / DPS - Hole only $ 18 Mag Switch / DPS - Prep and reinf. (no junction box) $ 47Hospital Stop (Galv) up to 6" $ 193 8" Junction Box Welded in $ 58 14" Junction Box Welded in $ 61 10" Junction Box Welded in Soffi t $ 59
Universal FramesME Series
Frame ConstructionUnit Bundle (3PC) $ 7
Standard Face Weld (3PC) $ 86
Full Profi le Weld (3PC) $ 141
Add
Frame Profi le OptionsNo Returns No Charge Cased Open No Charge
Single Rabbet $ 43
4” Face Heads (Sgl or Dbl) $ 48
Non Standard Face - per Frame (1” - 3 7/8” Uniform) $ 102
Non Standard Rabbet $ 98
Drywall (Second) Return (1/2”) $ 70
Kerf (includes weather-stripping) (16 gage only) $ 141
Non Standard Returns (uniform) $ 70
Add
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Frame Strike Prep
Effective April 4, 2020
32
Front outside
Back outside
refer to technical data sheet No. 201
Thickness – Made for two basic door thicknesses: 1 3/8” or 1 3/4” (Consult factory for optional thinknesses.)
Gages – 16 or 14 (12 gage available with coped corner connections for welding.)
Faces – 3/4” to 4”
Standard Rabbets – 1 3/8” (actual dimension 1 9/16”); 1 3/4” (actual dimension 1 15/16”). Rabbet dimension is 3/16” greater than the door thickness.
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Size Availability – Maximum Size 5’0” x 10’0” Single; Maximum Size 10’0” x 10’0” Double.
Label Range – maximum fi re rating 180 minute
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Frames for 1 3/8” doors shall have a 11 gage steel hinge reinforcement plate, projection welded with provisions for 3 1/2” x 3 1/2” standard weight template hinges. (Optional - 8” or 10”, 7 gage reinforcement)
(continued on back)
Strike Prep – Frames for 1 3/4” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Frames for 1 3/8” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage projection welded with provision for Universal ANSI A115.3 strike (2 3/4”.)
Hinge Backset – 5/16”
Backbend – 7/16” (Single Return)
Anchors – Sill anchors are included with all ME frames . All other anchors must be ordered separately.
Silencer Prep – 9/32” dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.
Double Heads – Double heads are undersized 1/16” (except for cased open heads, which are nominal).
Mortar Guards – Mortar guards of 26 gage steel shall be welded to each hinge and strike reinforcement plate.
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet, Double Egress, Cased Opening and Kerf. (Special profi les available, consult factory.)
Handing – Frames are handed.
Corner Connection
Standard Sill Anchor
Frame Hinge Prep
Full Profi le Weld
Face Welded
Snap In Universal Anchor
Masonry Wire Anchor
“Z” Anchor
Prepared Opening Anchor(Bolt sold separately)
Masonry “T” Anchor
AddLabel PreparationsMark Numbers No Charge
U.L. Mylar Label (standard unless specifi ed otherwise) $ 17
U.L. Metal Label $ 28
Warnock Hersey Metal Label $ 28
FBC / Florida Bldg Code *Ref Eng Section for details $ 28
Special Finish PreparationsSecond Coat of Primer $ 85
Finish Paint Setup Charge Frame (never waived) $ 1,214
Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 195
NOTE: Finish paint unavailable on welded frames
Add
Anchor OptionsWelded in Prepared Opening Anchor (per anchor) $ 14
Welded in Anchor (per anchor) $ 7
Punch and Dimple Only (per prep) $ 4
NOTE: Frames up to 7’0 quantity of anchors - 6 (max 8 3/4” depth)Frames over 7’0 thru 10’0 quantity of anchors - 8 (max 8 3/4” depth)
Frames over 8 3/4” depth receive double anchor quantity
Add
Special Constructions Add
Special Width (use next larger size) No Charge Special Height (use next larger size) No Charge Communicating (6) 4.5 hinge preps x (2) ASA preps $ 68 Dutch prep (4) 4.5 hinge preps x ASA prep $ 67Cap Top or bottom of Jamb (each) $ 64 Mag Switch / DPS - Hole only $ 18 Mag Switch / DPS - Prep and reinf. (no junction box) $ 47Hospital Stop (Galv) up to 6" $ 193 8" Junction Box Welded in $ 58 14" Junction Box Welded in $ 61 10" Junction Box Welded in Soffi t $ 59
Universal FramesME Series
Frame ConstructionUnit Bundle (3PC) $ 7
Standard Face Weld (3PC) $ 86
Full Profi le Weld (3PC) $ 141
Add
Frame Profi le OptionsNo Returns No Charge Cased Open No Charge
Single Rabbet $ 43
4” Face Heads (Sgl or Dbl) $ 48
Non Standard Face - per Frame (1” - 3 7/8” Uniform) $ 102
Non Standard Rabbet $ 98
Drywall (Second) Return (1/2”) $ 70
Kerf (includes weather-stripping) (16 gage only) $ 141
Non Standard Returns (uniform) $ 70
Add
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Frame Strike Prep
Effective April 4, 2020
33
Hinge Preparations
Special Hinge Locations No Charge 4 1/2” Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17
4” Template Hinge Prep - Sq. Corner only (per hinge) $ 46
5” Standard or Heavy Weight Hinge Prep (per hinge) No Charge
Electric Hinge (one 1/2” dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet or Face) $ 65
Power Transfer (no junction box) $ 101
Add
Frame - Strike PreparationsSpecial Strike Location No ChargeStandard Strike at Non Standard Location No ChargeCylindrical Dead Lock (2 3/4” Strike) $ 20 Mortise Dead Lock (3 1/2” Strike) $ 45 Unit Lock / Double Strike prep (ex. Schlage H) N/ARim Reinforcement only $ 20 Surface Vertical Rod Reinforcement only $ 26 Concealed Vertical Rod (Mortise Strike) (per prep) $ 52 Exit Alarm Reinforcement only $ 19 Electric Strike (no junction box) $ 65 Flush Bolt Strike Prep / Reversible or Automatic $ 47 Surface Bolt Reinforce only $ 21
Add
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 21 Full Depth Reinforcement (price per foot) $ 28
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 198
Add
See Engineering Section for further options and / or details
Universal Frame ME Series
See back page for more options
UNIVERSAL FRAMES 7/16” Single Return
Single 16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width Height
Thru 3'0"
6'8" $247 $280 $311 $347 $405 $513 7'0" $256 $295 $322 $361 $417 $527 7'2" $272 $310 $338 $380 $438 $545 8'0" $316 $339 $372 $410 $472 $571 9'0" $351 $386 $407 $453 $521 $602 10'0" $399 $437 $464 $513 $582 $670
Over 3'0" thru 4'0"
6'8" $260 $294 $322 $361 $414 $521 7'0" $269 $309 $333 $375 $426 $535 7'2" $285 $324 $349 $394 $447 $553 8'0" $329 $353 $383 $424 $481 $579 9'0" $364 $400 $418 $467 $530 $610 10'0" $412 $451 $475 $527 $591 $678
Over 4'0" thru 5'0"
6'8" $294 $329 $360 $399 $452 $558 7'0" $303 $344 $371 $413 $464 $572 7'2" $319 $359 $387 $432 $485 $590 8'0" $363 $388 $421 $462 $519 $616 9'0" $398 $435 $456 $505 $568 $647 10'0" $446 $486 $513 $565 $629 $715
Single14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $309 $338 $370 $415 $482 $553 7'0" $314 $355 $383 $433 $496 $575 7'2" $336 $371 $398 $447 $518 $592 8'0" $383 $407 $437 $487 $553 $632 9'0" $428 $462 $490 $542 $619 $682 10'0" $480 $505 $542 $600 $684 $733 6'8" $321 $353 $380 $430 $491 $567 7'0" $326 $370 $393 $448 $505 $589 7'2" $348 $386 $408 $462 $527 $606 8'0" $395 $422 $447 $502 $562 $646 9'0" $440 $477 $500 $557 $628 $696 10'0" $492 $520 $552 $615 $693 $747 6'8" $371 $399 $429 $481 $541 $608 7'0" $376 $416 $442 $499 $555 $630 7'2" $398 $432 $457 $513 $577 $647 8'0" $445 $468 $496 $553 $612 $687
9'0" $490 $523 $549 $608 $678 $737
10'0" $542 $566 $601 $666 $743 $788
UNIVERSAL FRAMES 7/16” Single Return
NOTE: Frames are priced as Equal or Unequal Rabbet.NOTE: Frames 3” - 4 1/2” Jamb Depth must be single rabbet. ADD to 4 5/8” depth. (minimum 1” soffit)
Double16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width Height
Over 4'0" thru 6'0"
6'8" $301 $343 $375 $415 $470 $576 7'0" $307 $355 $387 $427 $480 $588 7'2" $327 $377 $407 $447 $506 $616 8'0" $385 $415 $443 $487 $544 $646 9'0" $425 $463 $483 $529 $594 $690 10'0" $471 $511 $547 $593 $666 $754
Over 6'0" thru 8'0"
6'8" $320 $362 $400 $438 $497 $603 7'0" $326 $374 $412 $450 $507 $615 7'2" $346 $396 $432 $470 $533 $643 8'0" $404 $434 $468 $510 $571 $673 9'0" $444 $482 $508 $552 $621 $717 10'0" $490 $530 $572 $616 $693 $781
Over 8'0" thru 9'0"
6'8" $328 $372 $411 $451 $509 $612 7'0" $334 $384 $423 $463 $519 $624 7'2" $354 $406 $443 $483 $545 $652 8'0" $412 $444 $479 $523 $583 $682 9'0" $452 $492 $519 $565 $633 $726 10'0" $498 $540 $583 $629 $705 $790
Over 9'0" thru 10'0"
6'8" $353 $400 $442 $486 $544 $646 7'0" $359 $412 $454 $498 $554 $658 7'2" $379 $434 $474 $518 $580 $686 8'0" $437 $472 $510 $558 $618 $716 9'0" $477 $520 $550 $600 $668 $760 10'0" $523 $568 $614 $664 $740 $824
Double14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $384 $410 $445 $499 $557 $622 7'0" $390 $424 $461 $515 $569 $650 7'2" $410 $444 $477 $531 $599 $666 8'0" $472 $488 $523 $577 $641 $714 9'0" $524 $542 $573 $633 $709 $760 10'0" $576 $592 $639 $695 $779 $820 6'8" $395 $421 $462 $515 $573 $638 7'0" $401 $435 $478 $531 $585 $666 7'2" $421 $455 $494 $547 $615 $682 8'0" $483 $499 $540 $593 $657 $730 9'0" $535 $553 $590 $649 $725 $776 10'0" $587 $603 $656 $711 $795 $836 6'8" $408 $437 $481 $535 $592 $658 7'0" $414 $451 $497 $551 $604 $686 7'2" $434 $471 $513 $567 $634 $702 8'0" $496 $515 $559 $613 $676 $750 9'0" $548 $569 $609 $669 $744 $796 10'0" $600 $619 $675 $731 $814 $856 6'8" $440 $474 $522 $580 $638 $707 7'0" $446 $488 $538 $596 $650 $735 7'2" $466 $508 $554 $612 $680 $751 8'0" $528 $552 $600 $658 $722 $799 9'0" $580 $606 $650 $714 $790 $845 10'0" $632 $656 $716 $776 $860 $905
COMPONENTS UNIVERSAL FRAMES 7/16” Single Return
Header16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
SGL Head
Thru 3'0" $52 $58 $68 $77 $97 $119 Over 3'0" thru 4'0" $65 $72 $79 $91 $106 $127 Over 4'0" thru 6'0" $99 $107 $117 $129 $144 $164
DBL Head
Over 6'0" thru 8'0" $118 $126 $142 $152 $171 $191 Over 8'0" thru 9'0" $126 $136 $153 $165 $183 $200 Over 9'0" thru 10'0" $151 $164 $184 $200 $218 $234
14 GAGE
Header 4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
Thru 3'0" $62 $71 $84 $95 $118 $135 Over 3'0" thru 4'0" $74 $86 $94 $110 $127 $149 Over 4'0" thru 6'0" $124 $132 $143 $161 $177 $190 Over 6'0" thru 8'0" $135 $143 $160 $177 $193 $206 Over 8'0" thru 9'0" $148 $159 $179 $197 $212 $226 Over 9'0" thru 10'0" $180 $196 $220 $242 $258 $275
COMPONENTS UNIVERSAL FRAMES 7/16” Single Return
Jamb Pair 16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
SGL Pair
6'8" $195 $222 $243 $270 $308 $394 7'0" $204 $237 $254 $284 $320 $408 7'2" $220 $252 $270 $303 $341 $426 8'0" $264 $281 $304 $333 $375 $452 9'0" $299 $328 $339 $376 $424 $483 10'0" $347 $379 $396 $436 $485 $551
DBL Pair
6'8" $202 $236 $258 $286 $326 $412 7'0" $208 $248 $270 $298 $336 $424 7'2" $228 $270 $290 $318 $362 $452 8'0" $286 $308 $326 $358 $400 $482 9'0" $326 $356 $366 $400 $450 $526 10'0" $372 $404 $430 $464 $522 $590
14 GAGE
Jamb Pair 4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $247 $267 $286 $320 $364 $418 7'0" $252 $284 $299 $338 $378 $440 7'2" $274 $300 $314 $352 $400 $457 8'0" $321 $336 $353 $392 $435 $497 9'0" $366 $391 $406 $447 $501 $547 10'0" $418 $434 $458 $505 $566 $598 6'8" $260 $278 $302 $338 $380 $432 7'0" $266 $292 $318 $354 $392 $460 7'2" $286 $312 $334 $370 $422 $476 8'0" $348 $356 $380 $416 $464 $524 9'0" $400 $410 $430 $472 $532 $570 10'0" $452 $460 $496 $534 $602 $630
Steel Types Add
Cold Rolled Steel Included A60 Galvanneal $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 80
12 Gage - See Stick section N/A
Effective April 4, 2020
34
Hinge Preparations
Special Hinge Locations No Charge 4 1/2” Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17
4” Template Hinge Prep - Sq. Corner only (per hinge) $ 46
5” Standard or Heavy Weight Hinge Prep (per hinge) No Charge
Electric Hinge (one 1/2” dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet or Face) $ 65
Power Transfer (no junction box) $ 101
Add
Frame - Strike PreparationsSpecial Strike Location No ChargeStandard Strike at Non Standard Location No ChargeCylindrical Dead Lock (2 3/4” Strike) $ 20 Mortise Dead Lock (3 1/2” Strike) $ 45 Unit Lock / Double Strike prep (ex. Schlage H) N/ARim Reinforcement only $ 20 Surface Vertical Rod Reinforcement only $ 26 Concealed Vertical Rod (Mortise Strike) (per prep) $ 52 Exit Alarm Reinforcement only $ 19 Electric Strike (no junction box) $ 65 Flush Bolt Strike Prep / Reversible or Automatic $ 47 Surface Bolt Reinforce only $ 21
Add
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 21 Full Depth Reinforcement (price per foot) $ 28
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 198
Add
See Engineering Section for further options and / or details
Universal Frame ME Series
See back page for more options
UNIVERSAL FRAMES 7/16” Single Return
Single 16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width Height
Thru 3'0"
6'8" $247 $280 $311 $347 $405 $513 7'0" $256 $295 $322 $361 $417 $527 7'2" $272 $310 $338 $380 $438 $545 8'0" $316 $339 $372 $410 $472 $571 9'0" $351 $386 $407 $453 $521 $602 10'0" $399 $437 $464 $513 $582 $670
Over 3'0" thru 4'0"
6'8" $260 $294 $322 $361 $414 $521 7'0" $269 $309 $333 $375 $426 $535 7'2" $285 $324 $349 $394 $447 $553 8'0" $329 $353 $383 $424 $481 $579 9'0" $364 $400 $418 $467 $530 $610 10'0" $412 $451 $475 $527 $591 $678
Over 4'0" thru 5'0"
6'8" $294 $329 $360 $399 $452 $558 7'0" $303 $344 $371 $413 $464 $572 7'2" $319 $359 $387 $432 $485 $590 8'0" $363 $388 $421 $462 $519 $616 9'0" $398 $435 $456 $505 $568 $647 10'0" $446 $486 $513 $565 $629 $715
Single14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $309 $338 $370 $415 $482 $553 7'0" $314 $355 $383 $433 $496 $575 7'2" $336 $371 $398 $447 $518 $592 8'0" $383 $407 $437 $487 $553 $632 9'0" $428 $462 $490 $542 $619 $682 10'0" $480 $505 $542 $600 $684 $733 6'8" $321 $353 $380 $430 $491 $567 7'0" $326 $370 $393 $448 $505 $589 7'2" $348 $386 $408 $462 $527 $606 8'0" $395 $422 $447 $502 $562 $646 9'0" $440 $477 $500 $557 $628 $696 10'0" $492 $520 $552 $615 $693 $747 6'8" $371 $399 $429 $481 $541 $608 7'0" $376 $416 $442 $499 $555 $630 7'2" $398 $432 $457 $513 $577 $647 8'0" $445 $468 $496 $553 $612 $687
9'0" $490 $523 $549 $608 $678 $737
10'0" $542 $566 $601 $666 $743 $788
UNIVERSAL FRAMES 7/16” Single Return
NOTE: Frames are priced as Equal or Unequal Rabbet.NOTE: Frames 3” - 4 1/2” Jamb Depth must be single rabbet. ADD to 4 5/8” depth. (minimum 1” soffit)
Double16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width Height
Over 4'0" thru 6'0"
6'8" $301 $343 $375 $415 $470 $576 7'0" $307 $355 $387 $427 $480 $588 7'2" $327 $377 $407 $447 $506 $616 8'0" $385 $415 $443 $487 $544 $646 9'0" $425 $463 $483 $529 $594 $690 10'0" $471 $511 $547 $593 $666 $754
Over 6'0" thru 8'0"
6'8" $320 $362 $400 $438 $497 $603 7'0" $326 $374 $412 $450 $507 $615 7'2" $346 $396 $432 $470 $533 $643 8'0" $404 $434 $468 $510 $571 $673 9'0" $444 $482 $508 $552 $621 $717 10'0" $490 $530 $572 $616 $693 $781
Over 8'0" thru 9'0"
6'8" $328 $372 $411 $451 $509 $612 7'0" $334 $384 $423 $463 $519 $624 7'2" $354 $406 $443 $483 $545 $652 8'0" $412 $444 $479 $523 $583 $682 9'0" $452 $492 $519 $565 $633 $726 10'0" $498 $540 $583 $629 $705 $790
Over 9'0" thru 10'0"
6'8" $353 $400 $442 $486 $544 $646 7'0" $359 $412 $454 $498 $554 $658 7'2" $379 $434 $474 $518 $580 $686 8'0" $437 $472 $510 $558 $618 $716 9'0" $477 $520 $550 $600 $668 $760 10'0" $523 $568 $614 $664 $740 $824
Double14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $384 $410 $445 $499 $557 $622 7'0" $390 $424 $461 $515 $569 $650 7'2" $410 $444 $477 $531 $599 $666 8'0" $472 $488 $523 $577 $641 $714 9'0" $524 $542 $573 $633 $709 $760 10'0" $576 $592 $639 $695 $779 $820 6'8" $395 $421 $462 $515 $573 $638 7'0" $401 $435 $478 $531 $585 $666 7'2" $421 $455 $494 $547 $615 $682 8'0" $483 $499 $540 $593 $657 $730 9'0" $535 $553 $590 $649 $725 $776 10'0" $587 $603 $656 $711 $795 $836 6'8" $408 $437 $481 $535 $592 $658 7'0" $414 $451 $497 $551 $604 $686 7'2" $434 $471 $513 $567 $634 $702 8'0" $496 $515 $559 $613 $676 $750 9'0" $548 $569 $609 $669 $744 $796 10'0" $600 $619 $675 $731 $814 $856 6'8" $440 $474 $522 $580 $638 $707 7'0" $446 $488 $538 $596 $650 $735 7'2" $466 $508 $554 $612 $680 $751 8'0" $528 $552 $600 $658 $722 $799 9'0" $580 $606 $650 $714 $790 $845 10'0" $632 $656 $716 $776 $860 $905
COMPONENTS UNIVERSAL FRAMES 7/16” Single Return
Header16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
SGL Head
Thru 3'0" $52 $58 $68 $77 $97 $119 Over 3'0" thru 4'0" $65 $72 $79 $91 $106 $127 Over 4'0" thru 6'0" $99 $107 $117 $129 $144 $164
DBL Head
Over 6'0" thru 8'0" $118 $126 $142 $152 $171 $191 Over 8'0" thru 9'0" $126 $136 $153 $165 $183 $200 Over 9'0" thru 10'0" $151 $164 $184 $200 $218 $234
14 GAGE
Header 4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
Thru 3'0" $62 $71 $84 $95 $118 $135 Over 3'0" thru 4'0" $74 $86 $94 $110 $127 $149 Over 4'0" thru 6'0" $124 $132 $143 $161 $177 $190 Over 6'0" thru 8'0" $135 $143 $160 $177 $193 $206 Over 8'0" thru 9'0" $148 $159 $179 $197 $212 $226 Over 9'0" thru 10'0" $180 $196 $220 $242 $258 $275
COMPONENTS UNIVERSAL FRAMES 7/16” Single Return
Jamb Pair 16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
SGL Pair
6'8" $195 $222 $243 $270 $308 $394 7'0" $204 $237 $254 $284 $320 $408 7'2" $220 $252 $270 $303 $341 $426 8'0" $264 $281 $304 $333 $375 $452 9'0" $299 $328 $339 $376 $424 $483 10'0" $347 $379 $396 $436 $485 $551
DBL Pair
6'8" $202 $236 $258 $286 $326 $412 7'0" $208 $248 $270 $298 $336 $424 7'2" $228 $270 $290 $318 $362 $452 8'0" $286 $308 $326 $358 $400 $482 9'0" $326 $356 $366 $400 $450 $526 10'0" $372 $404 $430 $464 $522 $590
14 GAGE
Jamb Pair 4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $247 $267 $286 $320 $364 $418 7'0" $252 $284 $299 $338 $378 $440 7'2" $274 $300 $314 $352 $400 $457 8'0" $321 $336 $353 $392 $435 $497 9'0" $366 $391 $406 $447 $501 $547 10'0" $418 $434 $458 $505 $566 $598 6'8" $260 $278 $302 $338 $380 $432 7'0" $266 $292 $318 $354 $392 $460 7'2" $286 $312 $334 $370 $422 $476 8'0" $348 $356 $380 $416 $464 $524 9'0" $400 $410 $430 $472 $532 $570 10'0" $452 $460 $496 $534 $602 $630
Steel Types Add
Cold Rolled Steel Included A60 Galvanneal $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 80
12 Gage - See Stick section N/A
Effective April 4, 2020
35
Front outside
Back outside
refer to technical data sheet No. 202
Thickness – Made for two basic door thicknesses: 1 3/8” or 1 3/4” (Consult factory for optional thinknesses.)
Gages – 16 or 14
Faces – 1 1/4” to 4”
Standard Rabbets – 1 3/8” (actual dimension 1 9/16”); 1 3/4” (actual dimension 1 15/16”). Rabbet dimension is 3/16” greater than the door thickness.
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Size Availability – Maximum Size 5’0” x 10’0” Single; Maximum Size 10’0” x 10’0” Double.
Label Range – Maximum fi re rating 90 minute with compression anchors.
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Frames for 1 3/8” doors shall have a 11 gage steel hinge reinforcement plate, projection welded with provisions for 3 1/2” x 3 1/2” standard weight template hinges. (Optional - 8” or 10”, 7 gage reinforcement)
(continued on back)
Strike Prep – Frames for 1 3/4” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Frames for 1 3/8” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage projection welded with provision for Universal ANSI A115.3 strike (2 3/4”.)
Hinge Backset – 5/16”
Backbend – 1/2” (Double Return)
Anchors – Welded in compression anchors with loose sill anchors and hole plugs (Ordered separately)
Silencer Prep – 9/32” dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.
Double Heads – Double heads are undersized 1/16” (except for cased open heads, which are nominal).
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet, Double Egress, Cased Opening and Kerf. (Special profi les available, consult factory.)
Handing – Frames are handed.
Drywall FramesMH Series
Compression Anchor
Frame Hinge Prep
Drywall Sill Anchor(Sold/Shipped Loose)
MH Corner Connection
Frame Strike Prep
“Z” Anchor (Optional)
L Strap Anchor (Optional)
AddSpecial ConstructionsSpecial Width (use next larger size) No Charge Special Height (use next larger size) No Charge Communicating (6) 4.5 hinge preps x (2) ASA preps $ 68 Dutch prep (4) 4.5 hinge preps x ASA prep $ 67 Cap Top or Bottom of Jamb (each) $ 64 Mag Switch / DPS - Hole only $ 18 Mag Switch / DPS - Prep and reinf. (no junction box) $ 47 Hospital Stop (Galv) up to 6” $ 193 8” Junction Box Welded in $ 58 14” Junction Box Welded in $ 61 10” Junction Box Welded in Soffi t $ 59 Weld in Mortar Box (each) $ 11
AddLabel PreparationsMark Numbers No Charge
U.L. Mylar Label (standard unless specifi ed otherwise) $ 17
U.L. Metal Label $ 28
Warnock Hersey Metal Label $ 28
* NOTE: Maximum fi re rating 1 1/2 hour with compression anchors*NOTE: Single rabbet min 3” max 4 3/8” depth,
Double rabbet min 4 1/2” max 15” depth
Special Finish PreparationsSecond Coat of Primer $ 85
Finish Paint Setup Charge (never waived) $ 1,214
Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 195
NOTE: Finish paint unavailable on welded frames
AddAnchor OptionsWelded in Anchor (per anchor) $ 7
Omit Drywall Compression Anchor (Deduct) $ (6)
Embossed Hole at Bottom Face No Charge
NOTE: Drywall frames standard with (1) each compression anchor per jamb
AddFrame ConstructionUnit Bundle (3PC) $ 7
Standard Face Weld (3PC) (Omit Compression Anchor) $ 86
Full Profi le Weld (3PC) (Omit Compression Anchor) $ 141
Frame Profi le OptionsNo Returns No Charge Cased Open No Charge
Single Rabbet $ 43
4” Face Heads (Sgl or Dbl) $ 48
Non Standard Face - per Frame (1” - 3 7/8” Uniform) $ 102
Non Standard Rabbet $ 98
Kerf (includes weather-stripping) (16 gage only) $ 141
Add
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
36
Front outside
Back outside
refer to technical data sheet No. 202
Thickness – Made for two basic door thicknesses: 1 3/8” or 1 3/4” (Consult factory for optional thinknesses.)
Gages – 16 or 14
Faces – 1 1/4” to 4”
Standard Rabbets – 1 3/8” (actual dimension 1 9/16”); 1 3/4” (actual dimension 1 15/16”). Rabbet dimension is 3/16” greater than the door thickness.
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Size Availability – Maximum Size 5’0” x 10’0” Single; Maximum Size 10’0” x 10’0” Double.
Label Range – Maximum fi re rating 90 minute with compression anchors.
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Frames for 1 3/8” doors shall have a 11 gage steel hinge reinforcement plate, projection welded with provisions for 3 1/2” x 3 1/2” standard weight template hinges. (Optional - 8” or 10”, 7 gage reinforcement)
(continued on back)
Strike Prep – Frames for 1 3/4” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Frames for 1 3/8” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage projection welded with provision for Universal ANSI A115.3 strike (2 3/4”.)
Hinge Backset – 5/16”
Backbend – 1/2” (Double Return)
Anchors – Welded in compression anchors with loose sill anchors and hole plugs (Ordered separately)
Silencer Prep – 9/32” dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.
Double Heads – Double heads are undersized 1/16” (except for cased open heads, which are nominal).
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet, Double Egress, Cased Opening and Kerf. (Special profi les available, consult factory.)
Handing – Frames are handed.
Drywall FramesMH Series
Compression Anchor
Frame Hinge Prep
Drywall Sill Anchor(Sold/Shipped Loose)
MH Corner Connection
Frame Strike Prep
“Z” Anchor (Optional)
L Strap Anchor (Optional)
AddSpecial ConstructionsSpecial Width (use next larger size) No Charge Special Height (use next larger size) No Charge Communicating (6) 4.5 hinge preps x (2) ASA preps $ 68 Dutch prep (4) 4.5 hinge preps x ASA prep $ 67 Cap Top or Bottom of Jamb (each) $ 64 Mag Switch / DPS - Hole only $ 18 Mag Switch / DPS - Prep and reinf. (no junction box) $ 47 Hospital Stop (Galv) up to 6” $ 193 8” Junction Box Welded in $ 58 14” Junction Box Welded in $ 61 10” Junction Box Welded in Soffi t $ 59 Weld in Mortar Box (each) $ 11
AddLabel PreparationsMark Numbers No Charge
U.L. Mylar Label (standard unless specifi ed otherwise) $ 17
U.L. Metal Label $ 28
Warnock Hersey Metal Label $ 28
* NOTE: Maximum fi re rating 1 1/2 hour with compression anchors*NOTE: Single rabbet min 3” max 4 3/8” depth,
Double rabbet min 4 1/2” max 15” depth
Special Finish PreparationsSecond Coat of Primer $ 85
Finish Paint Setup Charge (never waived) $ 1,214
Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 195
NOTE: Finish paint unavailable on welded frames
AddAnchor OptionsWelded in Anchor (per anchor) $ 7
Omit Drywall Compression Anchor (Deduct) $ (6)
Embossed Hole at Bottom Face No Charge
NOTE: Drywall frames standard with (1) each compression anchor per jamb
AddFrame ConstructionUnit Bundle (3PC) $ 7
Standard Face Weld (3PC) (Omit Compression Anchor) $ 86
Full Profi le Weld (3PC) (Omit Compression Anchor) $ 141
Frame Profi le OptionsNo Returns No Charge Cased Open No Charge
Single Rabbet $ 43
4” Face Heads (Sgl or Dbl) $ 48
Non Standard Face - per Frame (1” - 3 7/8” Uniform) $ 102
Non Standard Rabbet $ 98
Kerf (includes weather-stripping) (16 gage only) $ 141
Add
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
37
Hinge Preparations
Special Hinge Locations No Charge 4 1/2” Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17 5” Standard or Heavy Weight Hinge Prep (per hinge) No Charge Electric Hinge (one 1/2” dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet or Face) $ 65
Power Transfer (no junction box) $ 101
Add
Frame - Strike PreparationsSpecial Strike Location No Charge Standard Strike at Non Standard Location No Charge Cylindrical Dead Lock (2 3/4" Strike) $ 20 Mortise Dead Lock (3 1/2" Strike) $ 45 Unit Lock / Double Strike prep (ex. Schlage H) N/A Rim Reinforcement only $ 20 Surface Vertical Rod Reinforcement only $ 26 Concealed Vertical Rod (Mortise Strike) per prep $ 52 Exit Alarm Reinforcement only $ 19 Electric Strike (no junction box) $ 65 Flush Bolt Strike Prep / Reversible or Automatic $ 47 Surface Bolt Reinforce only $ 21
Add
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 21 Full Depth Reinforcement (price per foot) $ 28
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 198
See Engineering Section for further options and / or details
Drywall Frames MH Series
See back page for more options
FRAMES 1/2” Double Return x Compression Anchors
Single16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width Height
Thru 3'0"
6'8" $273 $321 $342 $383 $441 $549 7'0" $282 $333 $353 $397 $458 $556 7'2" $302 $346 $371 $417 $481 $577 8'0" $338 $382 $404 $449 $515 $614 9'0" $377 $430 $444 $496 $571 $658 10'0" $453 $507 $542 $590 $649 $740
Over 3'0" thru 4'0"
6'8" $290 $327 $352 $397 $452 $558 7'0" $299 $339 $363 $411 $469 $565 7'2" $319 $352 $381 $431 $492 $586 8'0" $355 $388 $414 $463 $526 $623 9'0" $394 $436 $454 $510 $582 $667 10'0" $470 $513 $552 $604 $660 $749
Over 4'0" thru 5'0"
6'8" $318 $354 $383 $430 $486 $597 7'0" $327 $366 $394 $444 $503 $604 7'2" $347 $379 $412 $464 $526 $625 8'0" $383 $415 $445 $496 $560 $662 9'0" $422 $463 $485 $543 $616 $706 10'0" $498 $540 $583 $637 $694 $788
Single14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $338 $399 $421 $467 $539 $640 7'0" $351 $408 $433 $484 $549 $654 7'2" $366 $423 $449 $497 $567 $673 8'0" $408 $454 $486 $524 $595 $701 9'0" $454 $519 $544 $593 $670 $733 10'0" $552 $604 $641 $683 $754 $854 6'8" $347 $408 $429 $484 $545 $652 7'0" $360 $417 $441 $501 $555 $666 7'2" $375 $432 $457 $514 $573 $685 8'0" $417 $463 $494 $541 $601 $713 9'0" $463 $528 $552 $610 $676 $745 10'0" $561 $613 $649 $700 $760 $866 6'8" $395 $456 $475 $526 $588 $687 7'0" $408 $465 $487 $543 $598 $701 7'2" $423 $480 $503 $556 $616 $720 8'0" $465 $511 $540 $583 $644 $748 9'0" $511 $576 $598 $652 $719 $780 10'0" $609 $661 $695 $742 $803 $901
FRAMES 1/2” Double Return x Compression Anchors
NOTE: Frames are priced as Equal or Unequal Rabbet.NOTE: Frames 3” - 4 1/2” Jamb Depth must be single rabbet. ADD to 4 1/2” depth. (minimum 1” soffit)
Double16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width Height
Over 4'0" thru 6'0"
6'8" $325 $368 $400 $447 $501 $599 7'0" $333 $378 $410 $457 $519 $613 7'2" $351 $396 $430 $481 $549 $637 8'0" $397 $440 $472 $525 $583 $693 9'0" $441 $488 $516 $573 $643 $733 10'0" $539 $570 $616 $663 $723 $813
Over 6'0" thru 8'0"
6'8" $341 $392 $421 $465 $520 $609 7'0" $349 $402 $431 $475 $538 $623 7'2" $367 $420 $451 $499 $568 $647 8'0" $413 $464 $493 $543 $602 $703 9'0" $457 $512 $537 $591 $662 $743 10'0" $555 $594 $637 $681 $742 $823
Over 8'0" thru 9'0"
6'8" $355 $413 $446 $492 $546 $633 7'0" $363 $423 $456 $502 $564 $647 7'2" $381 $441 $476 $526 $594 $671 8'0" $427 $485 $518 $570 $628 $727 9'0" $471 $533 $562 $618 $688 $767 10'0" $569 $615 $662 $708 $768 $847
Over 9'0" thru 10'0"
6'8" $395 $464 $502 $552 $609 $691 7'0" $403 $474 $512 $562 $627 $705 7'2" $421 $492 $532 $586 $657 $729 8'0" $467 $536 $574 $630 $691 $785 9'0" $511 $584 $618 $678 $751 $825
10’0” $609 $666 $718 $768 $831 $905
Double14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $413 $472 $489 $540 $603 $703 7'0" $425 $478 $501 $558 $609 $715 7'2" $443 $500 $519 $576 $641 $743 8'0" $489 $542 $571 $610 $669 $775 9'0" $545 $612 $643 $702 $769 $827 10'0" $639 $696 $725 $776 $831 $931 6'8" $432 $497 $518 $565 $634 $733 7'0" $444 $503 $530 $583 $640 $745 7'2" $462 $525 $548 $601 $672 $773 8'0" $508 $567 $600 $635 $700 $805 9'0" $564 $637 $672 $727 $800 $857 10'0" $658 $721 $754 $801 $862 $961 6'8" $447 $518 $537 $587 $653 $754 7'0" $459 $524 $549 $605 $659 $766 7'2" $477 $546 $567 $623 $691 $794 8'0" $523 $588 $619 $657 $719 $826 9'0" $579 $658 $691 $749 $819 $878 10'0" $673 $742 $773 $823 $881 $982 6'8" $507 $577 $600 $649 $715 $817 7'0" $519 $583 $612 $667 $721 $829 7'2" $537 $605 $630 $685 $753 $857 8'0" $583 $647 $682 $719 $781 $889 9'0" $639 $717 $754 $811 $881 $941 10'0" $733 $801 $836 $885 $943 $1,045
COMPONENT FRAMES 1/2” Double Return x Compression Anchors
Header16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
SGL Head
Thru 3'0" $54 $69 $75 $86 $106 $129 Over 3'0" thru 4'0" $71 $75 $85 $100 $117 $138 Over 4'0" thru 6'0" $99 $102 $116 $133 $151 $177
DBL Head
Over 6'0" thru 8'0" $115 $126 $137 $151 $170 $187 Over 8'0" thru 9'0" $129 $147 $162 $178 $196 $211 Over 9'0" thru 10'0" $169 $198 $218 $238 $259 $269
Header14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
Thru 3'0" $70 $81 $89 $99 $120 $148 Over 3'0" thru 4'0" $79 $90 $97 $116 $126 $160 Over 4'0" thru 6'0" $127 $138 $143 $158 $169 $195 Over 6'0" thru 8'0" $146 $163 $172 $183 $200 $225 Over 8'0" thru 9'0" $161 $184 $191 $205 $219 $246 Over 9'0" thru 10'0" $221 $243 $254 $267 $281 $309
COMPONENT FRAMES 1/2” Double Return x Compression Anchors
Jamb Pair 16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
SGL Pair
6'8" $219 $252 $267 $297 $335 $420 7'0" $228 $264 $278 $311 $352 $427 7'2" $248 $277 $296 $331 $375 $448 8'0" $284 $313 $329 $363 $409 $485 9'0" $323 $361 $369 $410 $465 $529 10'0" $399 $438 $467 $504 $543 $611
DBL Pair
6'8" $226 $266 $284 $314 $350 $422 7'0" $234 $276 $294 $324 $368 $436 7'2" $252 $294 $314 $348 $398 $460 8'0" $298 $338 $356 $392 $432 $516 9'0" $342 $386 $400 $440 $492 $556 10'0" $440 $468 $500 $530 $572 $636
Jamb Pair 14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $268 $318 $332 $368 $419 $492 7'0" $281 $327 $344 $385 $429 $506 7'2" $296 $342 $360 $398 $447 $525 8'0" $338 $373 $397 $425 $475 $553 9'0" $384 $438 $455 $494 $550 $585 10'0" $482 $523 $552 $584 $634 $706 6'8" $286 $334 $346 $382 $434 $508 7'0" $298 $340 $358 $400 $440 $520 7'2" $316 $362 $376 $418 $472 $548 8'0" $362 $404 $428 $452 $500 $580 9'0" $418 $474 $500 $544 $600 $632 10'0" $512 $558 $582 $618 $662 $736
AddSteel TypesCold Rolled Steel Included
A60 Galvanneal $ 43
G90 Galvanized (available in 14 & 16 gage only) $ 80
12 Gage - Not available with drywall returns N/A
Effective April 4, 2020
38
Hinge Preparations
Special Hinge Locations No Charge 4 1/2” Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17 5” Standard or Heavy Weight Hinge Prep (per hinge) No Charge Electric Hinge (one 1/2” dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet or Face) $ 65
Power Transfer (no junction box) $ 101
Add
Frame - Strike PreparationsSpecial Strike Location No Charge Standard Strike at Non Standard Location No Charge Cylindrical Dead Lock (2 3/4" Strike) $ 20 Mortise Dead Lock (3 1/2" Strike) $ 45 Unit Lock / Double Strike prep (ex. Schlage H) N/A Rim Reinforcement only $ 20 Surface Vertical Rod Reinforcement only $ 26 Concealed Vertical Rod (Mortise Strike) per prep $ 52 Exit Alarm Reinforcement only $ 19 Electric Strike (no junction box) $ 65 Flush Bolt Strike Prep / Reversible or Automatic $ 47 Surface Bolt Reinforce only $ 21
Add
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 21 Full Depth Reinforcement (price per foot) $ 28
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 198
See Engineering Section for further options and / or details
Drywall Frames MH Series
See back page for more options
FRAMES 1/2” Double Return x Compression Anchors
Single16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width Height
Thru 3'0"
6'8" $273 $321 $342 $383 $441 $549 7'0" $282 $333 $353 $397 $458 $556 7'2" $302 $346 $371 $417 $481 $577 8'0" $338 $382 $404 $449 $515 $614 9'0" $377 $430 $444 $496 $571 $658 10'0" $453 $507 $542 $590 $649 $740
Over 3'0" thru 4'0"
6'8" $290 $327 $352 $397 $452 $558 7'0" $299 $339 $363 $411 $469 $565 7'2" $319 $352 $381 $431 $492 $586 8'0" $355 $388 $414 $463 $526 $623 9'0" $394 $436 $454 $510 $582 $667 10'0" $470 $513 $552 $604 $660 $749
Over 4'0" thru 5'0"
6'8" $318 $354 $383 $430 $486 $597 7'0" $327 $366 $394 $444 $503 $604 7'2" $347 $379 $412 $464 $526 $625 8'0" $383 $415 $445 $496 $560 $662 9'0" $422 $463 $485 $543 $616 $706 10'0" $498 $540 $583 $637 $694 $788
Single14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $338 $399 $421 $467 $539 $640 7'0" $351 $408 $433 $484 $549 $654 7'2" $366 $423 $449 $497 $567 $673 8'0" $408 $454 $486 $524 $595 $701 9'0" $454 $519 $544 $593 $670 $733 10'0" $552 $604 $641 $683 $754 $854 6'8" $347 $408 $429 $484 $545 $652 7'0" $360 $417 $441 $501 $555 $666 7'2" $375 $432 $457 $514 $573 $685 8'0" $417 $463 $494 $541 $601 $713 9'0" $463 $528 $552 $610 $676 $745 10'0" $561 $613 $649 $700 $760 $866 6'8" $395 $456 $475 $526 $588 $687 7'0" $408 $465 $487 $543 $598 $701 7'2" $423 $480 $503 $556 $616 $720 8'0" $465 $511 $540 $583 $644 $748 9'0" $511 $576 $598 $652 $719 $780 10'0" $609 $661 $695 $742 $803 $901
FRAMES 1/2” Double Return x Compression Anchors
NOTE: Frames are priced as Equal or Unequal Rabbet.NOTE: Frames 3” - 4 1/2” Jamb Depth must be single rabbet. ADD to 4 1/2” depth. (minimum 1” soffit)
Double16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width Height
Over 4'0" thru 6'0"
6'8" $325 $368 $400 $447 $501 $599 7'0" $333 $378 $410 $457 $519 $613 7'2" $351 $396 $430 $481 $549 $637 8'0" $397 $440 $472 $525 $583 $693 9'0" $441 $488 $516 $573 $643 $733 10'0" $539 $570 $616 $663 $723 $813
Over 6'0" thru 8'0"
6'8" $341 $392 $421 $465 $520 $609 7'0" $349 $402 $431 $475 $538 $623 7'2" $367 $420 $451 $499 $568 $647 8'0" $413 $464 $493 $543 $602 $703 9'0" $457 $512 $537 $591 $662 $743 10'0" $555 $594 $637 $681 $742 $823
Over 8'0" thru 9'0"
6'8" $355 $413 $446 $492 $546 $633 7'0" $363 $423 $456 $502 $564 $647 7'2" $381 $441 $476 $526 $594 $671 8'0" $427 $485 $518 $570 $628 $727 9'0" $471 $533 $562 $618 $688 $767 10'0" $569 $615 $662 $708 $768 $847
Over 9'0" thru 10'0"
6'8" $395 $464 $502 $552 $609 $691 7'0" $403 $474 $512 $562 $627 $705 7'2" $421 $492 $532 $586 $657 $729 8'0" $467 $536 $574 $630 $691 $785 9'0" $511 $584 $618 $678 $751 $825
10’0” $609 $666 $718 $768 $831 $905
Double14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $413 $472 $489 $540 $603 $703 7'0" $425 $478 $501 $558 $609 $715 7'2" $443 $500 $519 $576 $641 $743 8'0" $489 $542 $571 $610 $669 $775 9'0" $545 $612 $643 $702 $769 $827 10'0" $639 $696 $725 $776 $831 $931 6'8" $432 $497 $518 $565 $634 $733 7'0" $444 $503 $530 $583 $640 $745 7'2" $462 $525 $548 $601 $672 $773 8'0" $508 $567 $600 $635 $700 $805 9'0" $564 $637 $672 $727 $800 $857 10'0" $658 $721 $754 $801 $862 $961 6'8" $447 $518 $537 $587 $653 $754 7'0" $459 $524 $549 $605 $659 $766 7'2" $477 $546 $567 $623 $691 $794 8'0" $523 $588 $619 $657 $719 $826 9'0" $579 $658 $691 $749 $819 $878 10'0" $673 $742 $773 $823 $881 $982 6'8" $507 $577 $600 $649 $715 $817 7'0" $519 $583 $612 $667 $721 $829 7'2" $537 $605 $630 $685 $753 $857 8'0" $583 $647 $682 $719 $781 $889 9'0" $639 $717 $754 $811 $881 $941 10'0" $733 $801 $836 $885 $943 $1,045
COMPONENT FRAMES 1/2” Double Return x Compression Anchors
Header16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
SGL Head
Thru 3'0" $54 $69 $75 $86 $106 $129 Over 3'0" thru 4'0" $71 $75 $85 $100 $117 $138 Over 4'0" thru 6'0" $99 $102 $116 $133 $151 $177
DBL Head
Over 6'0" thru 8'0" $115 $126 $137 $151 $170 $187 Over 8'0" thru 9'0" $129 $147 $162 $178 $196 $211 Over 9'0" thru 10'0" $169 $198 $218 $238 $259 $269
Header14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
Thru 3'0" $70 $81 $89 $99 $120 $148 Over 3'0" thru 4'0" $79 $90 $97 $116 $126 $160 Over 4'0" thru 6'0" $127 $138 $143 $158 $169 $195 Over 6'0" thru 8'0" $146 $163 $172 $183 $200 $225 Over 8'0" thru 9'0" $161 $184 $191 $205 $219 $246 Over 9'0" thru 10'0" $221 $243 $254 $267 $281 $309
COMPONENT FRAMES 1/2” Double Return x Compression Anchors
Jamb Pair 16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
SGL Pair
6'8" $219 $252 $267 $297 $335 $420 7'0" $228 $264 $278 $311 $352 $427 7'2" $248 $277 $296 $331 $375 $448 8'0" $284 $313 $329 $363 $409 $485 9'0" $323 $361 $369 $410 $465 $529 10'0" $399 $438 $467 $504 $543 $611
DBL Pair
6'8" $226 $266 $284 $314 $350 $422 7'0" $234 $276 $294 $324 $368 $436 7'2" $252 $294 $314 $348 $398 $460 8'0" $298 $338 $356 $392 $432 $516 9'0" $342 $386 $400 $440 $492 $556 10'0" $440 $468 $500 $530 $572 $636
Jamb Pair 14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $268 $318 $332 $368 $419 $492 7'0" $281 $327 $344 $385 $429 $506 7'2" $296 $342 $360 $398 $447 $525 8'0" $338 $373 $397 $425 $475 $553 9'0" $384 $438 $455 $494 $550 $585 10'0" $482 $523 $552 $584 $634 $706 6'8" $286 $334 $346 $382 $434 $508 7'0" $298 $340 $358 $400 $440 $520 7'2" $316 $362 $376 $418 $472 $548 8'0" $362 $404 $428 $452 $500 $580 9'0" $418 $474 $500 $544 $600 $632 10'0" $512 $558 $582 $618 $662 $736
AddSteel TypesCold Rolled Steel Included
A60 Galvanneal $ 43
G90 Galvanized (available in 14 & 16 gage only) $ 80
12 Gage - Not available with drywall returns N/A
Effective April 4, 2020
39
refer to technical data sheet No. 508
Double Egress Openings are designed to permit the fl ow of traffi c in two directions through the same opening.
All double egress openings shall be supplied as right hand swing unless otherwise specifi ed.
Fire Labeled – maximum 3 hour
Face – 1 3/8” standard, 2” optional.
(continued on back)
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Frames for 1 3/8” doors shall have a 11 gage steel hinge reinforcement plate, projection welded with provisions for 3 1/2” x 3 1/2” standard weight template hinges. (Optional - 8” or 10”, 7 gage reinforcement)
Hinge Backset – 5/16”
Backbend – 7/16” (Single Return)
Double EgressME Series
Rough Opening Required for Butted Frame
Door Width Opening + 2x Smaller Face Dimension + 1 3/4”
Door Heigth Opening + Smaller Face Dimension + 1/4”
Double Egress Sill
Double Egress Hinge
Welded Corner Connection
Double Egress Corner
Double Egress Head AnchorL Strap Anchor Double Egress (Wood Stud)
Double Egress Prepared Opening Anchor
Double Egress Wire Anchor
Double Egress Anchor
DOOR AND FRAME HANDING CHARTDOOR AND FRAME HANDING CHART
Right Hand SwingLeft Hand Swing
1 3/8” Face (standard)
7/16
”
7/16
”
2 5/8”
1 3/8”
2”
5/8”
5/
8”
Equa
lEq
ual
4 3/4
” to
20 “
Jam
b De
pths
1 15/
16”
7/16” 7/16”
2”
EqualEqual
5/8”
2” 1 3
/8”
2 5/8” 2”
3 1/4”
7/16
”
5/8”
5/
8”
Equa
lEq
ual
1 15/
16”
7/16
”
2 5/8
”
2”
Equal
5/8”
2 5/8
”
7/16” 7/16”
Equal
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
2” Face (optional)
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
40
refer to technical data sheet No. 508
Double Egress Openings are designed to permit the fl ow of traffi c in two directions through the same opening.
All double egress openings shall be supplied as right hand swing unless otherwise specifi ed.
Fire Labeled – maximum 3 hour
Face – 1 3/8” standard, 2” optional.
(continued on back)
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Frames for 1 3/8” doors shall have a 11 gage steel hinge reinforcement plate, projection welded with provisions for 3 1/2” x 3 1/2” standard weight template hinges. (Optional - 8” or 10”, 7 gage reinforcement)
Hinge Backset – 5/16”
Backbend – 7/16” (Single Return)
Double EgressME Series
Rough Opening Required for Butted Frame
Door Width Opening + 2x Smaller Face Dimension + 1 3/4”
Door Heigth Opening + Smaller Face Dimension + 1/4”
Double Egress Sill
Double Egress Hinge
Welded Corner Connection
Double Egress Corner
Double Egress Head AnchorL Strap Anchor Double Egress (Wood Stud)
Double Egress Prepared Opening Anchor
Double Egress Wire Anchor
Double Egress Anchor
DOOR AND FRAME HANDING CHARTDOOR AND FRAME HANDING CHART
Right Hand SwingLeft Hand Swing
1 3/8” Face (standard)
7/16
”
7/16
”
2 5/8”
1 3/8”
2”
5/8”
5/
8”
Equa
lEq
ual
4 3/4
” to
20 “
Jam
b De
pths
1 15/
16”
7/16” 7/16”
2”
EqualEqual
5/8”
2” 1 3
/8”
2 5/8” 2”
3 1/4”
7/16
”
5/8”
5/
8”
Equa
lEq
ual
1 15/
16”
7/16
”
2 5/8
”
2”
Equal
5/8”
2 5/8
”
7/16” 7/16”
Equal
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
2” Face (optional)
41
Frame - Strike PreparationsSurface Vertical Rod Reinforcement only $ 26 Concealed Vertical Rod (Mortise Strike) (per prep) $ 52
See Engineering Section for further options and / or details
Double Egress - ME Series
FRAMES 7/16” Single Return x 1 3/8” Face
16 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width Height
Thru 6’0”
6'8" $811 $840 $868 $924 $990 $1,088 7'0" $817 $844 $876 $932 $998 $1,096 7'2" $831 $852 $886 $942 $1,008 $1,108 8'0" $881 $896 $930 $988 $1,056 $1,154 9'0" $899 $930 $950 $1,006 $1,068 $1,156 10'0" $939 $964 $998 $1,054 $1,122 $1,192
Over6’0”thru8’0”
6'8" $827 $860 $888 $941 $1,003 $1,107 7'0" $833 $864 $896 $949 $1,011 $1,115 7'2" $847 $872 $906 $959 $1,021 $1,127 8'0" $897 $916 $950 $1,005 $1,069 $1,173 9'0" $915 $950 $970 $1,023 $1,081 $1,175 10'0" $955 $984 $1,018 $1,071 $1,135 $1,211
Over8’0”thru9’0”
6'8" $849 $888 $918 $962 $1,031 $1,134 7'0" $855 $892 $926 $970 $1,039 $1,142 7'2" $869 $900 $936 $980 $1,049 $1,154 8'0" $919 $944 $980 $1,026 $1,097 $1,200 9'0" $937 $978 $1,000 $1,044 $1,109 $1,202 10'0" $977 $1,012 $1,048 $1,092 $1,163 $1,238
Over9’0”thru10’0”
6'8" $904 $957 $988 $1,034 $1,103 $1,209 7'0" $910 $961 $996 $1,042 $1,111 $1,217 7'2" $924 $969 $1,006 $1,052 $1,121 $1,229 8'0" $974 $1,013 $1,050 $1,098 $1,169 $1,275 9'0" $992 $1,047 $1,070 $1,116 $1,181 $1,277 10'0" $1,032 $1,081 $1,118 $1,164 $1,235 $1,313
14 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $904 $923 $958 $1,027 $1,092 $1,151 7'0" $916 $935 $968 $1,029 $1,102 $1,171 7'2" $932 $941 $978 $1,039 $1,112 $1,181 8'0" $986 $991 $1,026 $1,089 $1,174 $1,231 9'0" $994 $1,023 $1,056 $1,119 $1,190 $1,259 10'0" $1,036 $1,065 $1,102 $1,177 $1,248 $1,303 6'8" $916 $940 $975 $1,040 $1,107 $1,175 7'0" $928 $952 $985 $1,042 $1,117 $1,195 7'2" $944 $958 $995 $1,052 $1,127 $1,205 8'0" $998 $1,008 $1,043 $1,102 $1,189 $1,255 9'0" $1,006 $1,040 $1,073 $1,132 $1,205 $1,283 10'0" $1,048 $1,082 $1,119 $1,190 $1,263 $1,327 6'8" $944 $971 $1,007 $1,069 $1,137 $1,210 7'0" $956 $983 $1,017 $1,071 $1,147 $1,230 7'2" $972 $989 $1,027 $1,081 $1,157 $1,240 8'0" $1,026 $1,039 $1,075 $1,131 $1,219 $1,290 9'0" $1,034 $1,071 $1,105 $1,161 $1,235 $1,318 10'0" $1,076 $1,113 $1,151 $1,219 $1,293 $1,362 6'8" $1,003 $1,046 $1,084 $1,150 $1,215 $1,287 7'0" $1,015 $1,058 $1,094 $1,152 $1,225 $1,307 7'2" $1,031 $1,064 $1,104 $1,162 $1,235 $1,317 8'0" $1,085 $1,114 $1,152 $1,212 $1,297 $1,367 9'0" $1,093 $1,146 $1,182 $1,242 $1,313 $1,395 10'0" $1,135 $1,188 $1,228 $1,300 $1,371 $1,439
COMPONENT FRAMES 7/16” Single Return x 1 3/8” Face
HEADS16 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
DBL Head
Thru 6'0" $275 $282 $290 $310 $332 $360 Over 6'0" thru 8'0" $291 $302 $310 $327 $345 $379 Over 8'0" thru 9'0" $313 $330 $340 $348 $373 $406 Over 9'0" thru 10'0" $368 $399 $410 $420 $445 $481
HEADS14 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
Thru 6'0" $320 $323 $332 $355 $374 $393 Over 6'0" thru 8'0" $332 $340 $349 $368 $389 $417 Over 8'0" thru 9'0" $360 $371 $381 $397 $419 $452 Over 9'0" thru 10'0" $419 $446 $458 $478 $497 $529
COMPONENT FRAMES 7/16” Single Return x 1 3/8” Face
JAMB PAIRS16 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
DBL Pair
6'8" $536 $558 $578 $614 $658 $728 7'0" $542 $562 $586 $622 $666 $736 7'2" $556 $570 $596 $632 $676 $748 8'0" $606 $614 $640 $678 $724 $794 9'0" $624 $648 $660 $696 $736 $796 10'0" $664 $682 $708 $744 $790 $832
JAMB PAIRS14 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $584 $600 $626 $672 $718 $758 7'0" $596 $612 $636 $674 $728 $778 7'2" $612 $618 $646 $684 $738 $788 8'0" $666 $668 $694 $734 $800 $838 9'0" $674 $700 $724 $764 $816 $866 10'0" $716 $742 $770 $822 $874 $910
Label PreparationsMark Numbers No Charge U.L .Emboss (must specify) No Charge U.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 28 Warnock Hersey Metal Label $ 28
Anchor OptionsWelded in Prepared Opening Anchor (per anchor) $ 14 Welded in Anchor (per anchor) $ 7 Punch and Dimple Only (per prep) $ 4
NOTE: Frames up to 7’0 quantity of anchors - 6 (max 8 3/4” depth) Frames over 7’0 thru 10’0 quantity of anchors - 8 (max 8 3/4” depth)
Frames over 8 3/4” depth receive double anchor quantity
Frame ConstructionUnit Bundle (3PC) $ 7 Standard Face Weld (3PC) $ 86Full Profile Weld (3PC) $ 141
Special ConstructionsSpecial Width (use next larger size) No Charge Special Height (use next larger size) No Charge Mag Switch / DPS - Hole only $ 18 Mag Switch / DPS - Prep and reinf. (no junction box) $ 47 8” Junction Box Welded in $ 58 14” Junction Box Welded in $ 61 10” Junction Box Welded in Soffit $ 59
Frame Profile OptionsNo Returns No Charge Non Standard Face - see cut and notch N/A2” Face No Charge
Steel TypesCold Rolled Steel Included A60 Galvanneal $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 80 12 Gage - see cut and notch N/A
Hinge PreparationsSpecial Hinge Locations No Charge 4 1/2" Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17 5" Standard or Heavy Weight Hinge Prep (per hinge) No Charge Electric Hinge (one 1/2" dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet) $ 65 Power Transfer (no junction box) $ 101
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 21 Full Depth Reinforcement (price per foot) $ 28
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 198
Special Finish Preparations
Second Coat of Primer $ 85 Finish Paint Setup Charge (never waived) $ 1,214Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 195
NOTE: Finish paint unavailable on welded frames
Minimum jamb depth is 4 1/2”
Effective April 4, 2020
*NOTE: Fire rating - max depth 12 3/4”Heads will have anchors welded in
42
Frame - Strike PreparationsSurface Vertical Rod Reinforcement only $ 26 Concealed Vertical Rod (Mortise Strike) (per prep) $ 52
See Engineering Section for further options and / or details
Double Egress - ME Series
FRAMES 7/16” Single Return x 1 3/8” Face
16 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width Height
Thru 6’0”
6'8" $811 $840 $868 $924 $990 $1,088 7'0" $817 $844 $876 $932 $998 $1,096 7'2" $831 $852 $886 $942 $1,008 $1,108 8'0" $881 $896 $930 $988 $1,056 $1,154 9'0" $899 $930 $950 $1,006 $1,068 $1,156 10'0" $939 $964 $998 $1,054 $1,122 $1,192
Over6’0”thru8’0”
6'8" $827 $860 $888 $941 $1,003 $1,107 7'0" $833 $864 $896 $949 $1,011 $1,115 7'2" $847 $872 $906 $959 $1,021 $1,127 8'0" $897 $916 $950 $1,005 $1,069 $1,173 9'0" $915 $950 $970 $1,023 $1,081 $1,175 10'0" $955 $984 $1,018 $1,071 $1,135 $1,211
Over8’0”thru9’0”
6'8" $849 $888 $918 $962 $1,031 $1,134 7'0" $855 $892 $926 $970 $1,039 $1,142 7'2" $869 $900 $936 $980 $1,049 $1,154 8'0" $919 $944 $980 $1,026 $1,097 $1,200 9'0" $937 $978 $1,000 $1,044 $1,109 $1,202 10'0" $977 $1,012 $1,048 $1,092 $1,163 $1,238
Over9’0”thru10’0”
6'8" $904 $957 $988 $1,034 $1,103 $1,209 7'0" $910 $961 $996 $1,042 $1,111 $1,217 7'2" $924 $969 $1,006 $1,052 $1,121 $1,229 8'0" $974 $1,013 $1,050 $1,098 $1,169 $1,275 9'0" $992 $1,047 $1,070 $1,116 $1,181 $1,277 10'0" $1,032 $1,081 $1,118 $1,164 $1,235 $1,313
14 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $904 $923 $958 $1,027 $1,092 $1,151 7'0" $916 $935 $968 $1,029 $1,102 $1,171 7'2" $932 $941 $978 $1,039 $1,112 $1,181 8'0" $986 $991 $1,026 $1,089 $1,174 $1,231 9'0" $994 $1,023 $1,056 $1,119 $1,190 $1,259 10'0" $1,036 $1,065 $1,102 $1,177 $1,248 $1,303 6'8" $916 $940 $975 $1,040 $1,107 $1,175 7'0" $928 $952 $985 $1,042 $1,117 $1,195 7'2" $944 $958 $995 $1,052 $1,127 $1,205 8'0" $998 $1,008 $1,043 $1,102 $1,189 $1,255 9'0" $1,006 $1,040 $1,073 $1,132 $1,205 $1,283 10'0" $1,048 $1,082 $1,119 $1,190 $1,263 $1,327 6'8" $944 $971 $1,007 $1,069 $1,137 $1,210 7'0" $956 $983 $1,017 $1,071 $1,147 $1,230 7'2" $972 $989 $1,027 $1,081 $1,157 $1,240 8'0" $1,026 $1,039 $1,075 $1,131 $1,219 $1,290 9'0" $1,034 $1,071 $1,105 $1,161 $1,235 $1,318 10'0" $1,076 $1,113 $1,151 $1,219 $1,293 $1,362 6'8" $1,003 $1,046 $1,084 $1,150 $1,215 $1,287 7'0" $1,015 $1,058 $1,094 $1,152 $1,225 $1,307 7'2" $1,031 $1,064 $1,104 $1,162 $1,235 $1,317 8'0" $1,085 $1,114 $1,152 $1,212 $1,297 $1,367 9'0" $1,093 $1,146 $1,182 $1,242 $1,313 $1,395 10'0" $1,135 $1,188 $1,228 $1,300 $1,371 $1,439
COMPONENT FRAMES 7/16” Single Return x 1 3/8” Face
HEADS16 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
DBL Head
Thru 6'0" $275 $282 $290 $310 $332 $360 Over 6'0" thru 8'0" $291 $302 $310 $327 $345 $379 Over 8'0" thru 9'0" $313 $330 $340 $348 $373 $406 Over 9'0" thru 10'0" $368 $399 $410 $420 $445 $481
HEADS14 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
Thru 6'0" $320 $323 $332 $355 $374 $393 Over 6'0" thru 8'0" $332 $340 $349 $368 $389 $417 Over 8'0" thru 9'0" $360 $371 $381 $397 $419 $452 Over 9'0" thru 10'0" $419 $446 $458 $478 $497 $529
COMPONENT FRAMES 7/16” Single Return x 1 3/8” Face
JAMB PAIRS16 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
DBL Pair
6'8" $536 $558 $578 $614 $658 $728 7'0" $542 $562 $586 $622 $666 $736 7'2" $556 $570 $596 $632 $676 $748 8'0" $606 $614 $640 $678 $724 $794 9'0" $624 $648 $660 $696 $736 $796 10'0" $664 $682 $708 $744 $790 $832
JAMB PAIRS14 GAGE
4 1/2”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
6'8" $584 $600 $626 $672 $718 $758 7'0" $596 $612 $636 $674 $728 $778 7'2" $612 $618 $646 $684 $738 $788 8'0" $666 $668 $694 $734 $800 $838 9'0" $674 $700 $724 $764 $816 $866 10'0" $716 $742 $770 $822 $874 $910
Label PreparationsMark Numbers No Charge U.L .Emboss (must specify) No Charge U.L. Mylar Label (standard unless specified otherwise) $ 17 U.L. Metal Label $ 28 Warnock Hersey Metal Label $ 28
Anchor OptionsWelded in Prepared Opening Anchor (per anchor) $ 14 Welded in Anchor (per anchor) $ 7 Punch and Dimple Only (per prep) $ 4
NOTE: Frames up to 7’0 quantity of anchors - 6 (max 8 3/4” depth) Frames over 7’0 thru 10’0 quantity of anchors - 8 (max 8 3/4” depth)
Frames over 8 3/4” depth receive double anchor quantity
Frame ConstructionUnit Bundle (3PC) $ 7 Standard Face Weld (3PC) $ 86Full Profile Weld (3PC) $ 141
Special ConstructionsSpecial Width (use next larger size) No Charge Special Height (use next larger size) No Charge Mag Switch / DPS - Hole only $ 18 Mag Switch / DPS - Prep and reinf. (no junction box) $ 47 8” Junction Box Welded in $ 58 14” Junction Box Welded in $ 61 10” Junction Box Welded in Soffit $ 59
Frame Profile OptionsNo Returns No Charge Non Standard Face - see cut and notch N/A2” Face No Charge
Steel TypesCold Rolled Steel Included A60 Galvanneal $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 80 12 Gage - see cut and notch N/A
Hinge PreparationsSpecial Hinge Locations No Charge 4 1/2" Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17 5" Standard or Heavy Weight Hinge Prep (per hinge) No Charge Electric Hinge (one 1/2" dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet) $ 65 Power Transfer (no junction box) $ 101
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 21 Full Depth Reinforcement (price per foot) $ 28
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 198
Special Finish Preparations
Second Coat of Primer $ 85 Finish Paint Setup Charge (never waived) $ 1,214Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 195
NOTE: Finish paint unavailable on welded frames
Minimum jamb depth is 4 1/2”
Effective April 4, 2020
*NOTE: Fire rating - max depth 12 3/4”Heads will have anchors welded in
43
Front outside
Back outside
refer to technical data sheet No. 508a
Double Egress Openings are designed to permit the fl ow of traffi c in two directions through the same opening.
Face – 2”
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Hinge Backset – 5/16”
Backbend – 1/2” (Double Return)
Double EgressMH Series
Double Egress Hinge
Double Egress Corner
DOOR AND FRAME HANDING CHARTDOOR AND FRAME HANDING CHART
Right Hand Swing (Standard)Left Hand Swing
Compression Anchor (Standard)
Rough Opening Required for DW Double Egress Frame Based on (1) compression anchor located on door rabbit (per jamb)
Door Width Opening + 3”
Door Heigth Opening + 1”
2” Face (standard)
2 5/8”
2”
3 1/4”
1/2”
5/8”
5/8”
Equa
lEq
ual
1 15/
16”
1/2”
2”
Equal
5/8”
2 5/8”
1/2” 1/2”
Equal 1 15/16”
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
44
Front outside
Back outside
refer to technical data sheet No. 508a
Double Egress Openings are designed to permit the fl ow of traffi c in two directions through the same opening.
Face – 2”
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Hinge Backset – 5/16”
Backbend – 1/2” (Double Return)
Double EgressMH Series
Double Egress Hinge
Double Egress Corner
DOOR AND FRAME HANDING CHARTDOOR AND FRAME HANDING CHART
Right Hand Swing (Standard)Left Hand Swing
Compression Anchor (Standard)
Rough Opening Required for DW Double Egress Frame Based on (1) compression anchor located on door rabbit (per jamb)
Door Width Opening + 3”
Door Heigth Opening + 1”
2” Face (standard)
2 5/8”
2”
3 1/4”
1/2”
5/8”
5/8”
Equa
lEq
ual
1 15/
16”
1/2”
2”
Equal
5/8”
2 5/8”
1/2” 1/2”
Equal 1 15/16”
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
45
See Engineering Section for further options and / or details
Double Egress - MH Series
FRAMES 1/2” Double Return x 2” Face x Compression Anchors
16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width Height
Thru 6’0”
6'8" $844 $882 $908 $962 $1,037 $1,147 7'0" $851 $886 $916 $971 $1,045 $1,155 7'2" $867 $896 $927 $980 $1,055 $1,168 8'0" $919 $944 $976 $1,032 $1,108 $1,219 9'0" $936 $979 $993 $1,055 $1,118 $1,222 10'0" $973 $1,017 $1,045 $1,108 $1,173 $1,264
Over6’0”thru8’0”
6'8" $856 $904 $930 $981 $1,053 $1,168 7'0" $863 $908 $938 $990 $1,061 $1,176 7'2" $879 $918 $949 $999 $1,071 $1,189 8'0" $931 $966 $998 $1,051 $1,124 $1,240 9'0" $948 $1,001 $1,015 $1,074 $1,134 $1,243 10'0" $985 $1,039 $1,067 $1,127 $1,189 $1,285
Over8’0”thru9’0”
6'8" $879 $933 $959 $1,006 $1,083 $1,199 7'0" $886 $937 $967 $1,015 $1,091 $1,207 7'2" $902 $947 $978 $1,024 $1,101 $1,220 8'0" $954 $995 $1,027 $1,076 $1,154 $1,271 9'0" $971 $1,030 $1,044 $1,099 $1,164 $1,274 10'0" $1,008 $1,068 $1,096 $1,152 $1,219 $1,316
Over9’0”thru10’0”
6'8" $935 $1,009 $1,036 $1,082 $1,159 $1,278 7'0" $942 $1,013 $1,044 $1,091 $1,167 $1,286 7'2" $958 $1,023 $1,055 $1,100 $1,177 $1,299 8'0" $1,010 $1,071 $1,104 $1,152 $1,230 $1,350 9'0" $1,027 $1,106 $1,121 $1,175 $1,240 $1,353 10'0" $1,064 $1,144 $1,173 $1,228 $1,295 $1,395
14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $943 $970 $1,002 $1,065 $1,139 $1,211 7'0" $957 $981 $1,013 $1,068 $1,151 $1,231 7'2" $973 $996 $1,024 $1,078 $1,162 $1,242 8'0" $1,032 $1,042 $1,080 $1,133 $1,229 $1,299 9'0" $1,037 $1,068 $1,106 $1,166 $1,231 $1,321 10'0" $1,085 $1,120 $1,156 $1,220 $1,294 $1,368 6'8" $952 $991 $1,018 $1,075 $1,158 $1,235 7'0" $966 $1,002 $1,029 $1,078 $1,170 $1,255 7'2" $982 $1,017 $1,040 $1,088 $1,181 $1,266 8'0" $1,041 $1,063 $1,096 $1,143 $1,248 $1,323 9'0" $1,046 $1,089 $1,122 $1,176 $1,250 $1,345 10'0" $1,094 $1,141 $1,172 $1,230 $1,313 $1,392 6'8" $984 $1,021 $1,049 $1,106 $1,187 $1,271 7'0" $998 $1,032 $1,060 $1,109 $1,199 $1,291 7'2" $1,014 $1,047 $1,071 $1,119 $1,210 $1,302 8'0" $1,073 $1,093 $1,127 $1,174 $1,277 $1,359 9'0" $1,078 $1,119 $1,153 $1,207 $1,279 $1,381 10'0" $1,126 $1,171 $1,203 $1,261 $1,342 $1,428 6'8" $1,041 $1,102 $1,130 $1,189 $1,265 $1,352 7'0" $1,055 $1,113 $1,141 $1,192 $1,277 $1,372 7'2" $1,071 $1,128 $1,152 $1,202 $1,288 $1,383 8'0" $1,130 $1,174 $1,208 $1,257 $1,355 $1,440 9'0" $1,135 $1,200 $1,234 $1,290 $1,357 $1,462 10'0" $1,183 $1,252 $1,284 $1,344 $1,420 $1,509
COMPONENT FRAMES 1/2” Double Return x 2” Face x Compression Anchors
Heads16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
DBL Head
Thru 6'0" $290 $295 $300 $322 $342 $382 Over 6'0" thru 8'0" $302 $317 $322 $341 $358 $403 Over 8'0" thru 9'0" $325 $346 $351 $366 $388 $434 Over 9'0" thru 10'0" $381 $422 $428 $442 $464 $513
Heads14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
Thru 6'0" $333 $335 $342 $369 $386 $412 Over 6'0" thru 8'0" $342 $356 $358 $379 $405 $436 Over 8'0" thru 9'0" $374 $386 $389 $410 $434 $472 Over 9'0" thru 10'0" $431 $467 $470 $493 $512 $553
COMPONENT FRAMES 1/2” Double Return x 2” Face x Compression Anchors
Jamb Pair16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
DBL Pair
6'8" $554 $587 $608 $640 $695 $765 7'0" $561 $591 $616 $649 $703 $773 7'2" $577 $601 $627 $658 $713 $786 8'0" $629 $649 $676 $710 $766 $837 9'0" $646 $684 $693 $733 $776 $840 10'0" $683 $722 $745 $786 $831 $882
Jamb Pair14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $610 $635 $660 $696 $753 $799 7'0" $624 $646 $671 $699 $765 $819 7'2" $640 $661 $682 $709 $776 $830 8'0" $699 $707 $738 $764 $843 $887 9'0" $704 $733 $764 $797 $845 $909 10'0" $752 $785 $814 $851 $908 $956
Frame - Strike PreparationsSurface Vertical Rod Reinforcement only $ 29 Concealed Vertical Rod (Mortise Strike) (per prep) $ 46
Label PreparationsMark Numbers No Charge U.L .Emboss (must specify) N/A U.L. Mylar Label (standard unless specified otherwise) N/A U.L. Metal Label N/A Warnock Hersey Metal Label N/A
Anchor OptionsWelded in Prepared Opening Anchor (per anchor) $ 10 Welded in Anchor (per anchor) $ 6 Punch and Dimple Only (per prep) $ 3
NOTE: Frames up to 7’0 quantity of anchors - 6 (max 8 3/4” depth) Frames over 7’0 thru 10’0 quantity of anchors - 8 (max 8 3/4” depth)
Frames over 8 3/4” depth receive double anchor quantity
Frame ConstructionUnit Bundle (3PC) $ 7 Standard Face Weld (3PC) (omit compression anchor) $ 78 Full Profile Weld (3PC) (omit compression anchor) $ 128
Special ConstructionsSpecial Width (use next larger size) No Charge Special Height (use next larger size) No Charge Mag Switch / DPS - Hole only $ 17 Mag Switch / DPS - Prep and reinf. (no junction box) $ 46 8” Junction Box Welded in $ 58 14” Junction Box Welded in $ 61 10” Junction Box Welded in Soffit $ 59
Frame Profile OptionsNo Returns No Charge Non Standard Face - see cut and notch N/A2” Face No Charge
Steel TypesCold Rolled Steel Included A60 Galvanneal $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 80 12 Gage - not available on drywall frame N/A
Hinge PreparationsSpecial Hinge Locations No Charge 4 1/2" Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17 5" Standard or Heavy Weight Hinge Prep (per hinge) No Charge Electric Hinge (one 1/2" dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet) $ 67 Power Transfer (no junction box) $ 101
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 24 Full Depth Reinforcement (price per foot) $ 27
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 192
Special Finish Preparations
Second Coat of Primer $ 83 Finish Paint Setup Charge (never waived) $ 1,179 Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 189
NOTE: Finish paint unavailable on welded frames
Effective April 4, 2020
NOTE: Fire rating not available
46
See Engineering Section for further options and / or details
Double Egress - MH Series
FRAMES 1/2” Double Return x 2” Face x Compression Anchors
16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width Height
Thru 6’0”
6'8" $844 $882 $908 $962 $1,037 $1,147 7'0" $851 $886 $916 $971 $1,045 $1,155 7'2" $867 $896 $927 $980 $1,055 $1,168 8'0" $919 $944 $976 $1,032 $1,108 $1,219 9'0" $936 $979 $993 $1,055 $1,118 $1,222 10'0" $973 $1,017 $1,045 $1,108 $1,173 $1,264
Over6’0”thru8’0”
6'8" $856 $904 $930 $981 $1,053 $1,168 7'0" $863 $908 $938 $990 $1,061 $1,176 7'2" $879 $918 $949 $999 $1,071 $1,189 8'0" $931 $966 $998 $1,051 $1,124 $1,240 9'0" $948 $1,001 $1,015 $1,074 $1,134 $1,243 10'0" $985 $1,039 $1,067 $1,127 $1,189 $1,285
Over8’0”thru9’0”
6'8" $879 $933 $959 $1,006 $1,083 $1,199 7'0" $886 $937 $967 $1,015 $1,091 $1,207 7'2" $902 $947 $978 $1,024 $1,101 $1,220 8'0" $954 $995 $1,027 $1,076 $1,154 $1,271 9'0" $971 $1,030 $1,044 $1,099 $1,164 $1,274 10'0" $1,008 $1,068 $1,096 $1,152 $1,219 $1,316
Over9’0”thru10’0”
6'8" $935 $1,009 $1,036 $1,082 $1,159 $1,278 7'0" $942 $1,013 $1,044 $1,091 $1,167 $1,286 7'2" $958 $1,023 $1,055 $1,100 $1,177 $1,299 8'0" $1,010 $1,071 $1,104 $1,152 $1,230 $1,350 9'0" $1,027 $1,106 $1,121 $1,175 $1,240 $1,353 10'0" $1,064 $1,144 $1,173 $1,228 $1,295 $1,395
14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $943 $970 $1,002 $1,065 $1,139 $1,211 7'0" $957 $981 $1,013 $1,068 $1,151 $1,231 7'2" $973 $996 $1,024 $1,078 $1,162 $1,242 8'0" $1,032 $1,042 $1,080 $1,133 $1,229 $1,299 9'0" $1,037 $1,068 $1,106 $1,166 $1,231 $1,321 10'0" $1,085 $1,120 $1,156 $1,220 $1,294 $1,368 6'8" $952 $991 $1,018 $1,075 $1,158 $1,235 7'0" $966 $1,002 $1,029 $1,078 $1,170 $1,255 7'2" $982 $1,017 $1,040 $1,088 $1,181 $1,266 8'0" $1,041 $1,063 $1,096 $1,143 $1,248 $1,323 9'0" $1,046 $1,089 $1,122 $1,176 $1,250 $1,345 10'0" $1,094 $1,141 $1,172 $1,230 $1,313 $1,392 6'8" $984 $1,021 $1,049 $1,106 $1,187 $1,271 7'0" $998 $1,032 $1,060 $1,109 $1,199 $1,291 7'2" $1,014 $1,047 $1,071 $1,119 $1,210 $1,302 8'0" $1,073 $1,093 $1,127 $1,174 $1,277 $1,359 9'0" $1,078 $1,119 $1,153 $1,207 $1,279 $1,381 10'0" $1,126 $1,171 $1,203 $1,261 $1,342 $1,428 6'8" $1,041 $1,102 $1,130 $1,189 $1,265 $1,352 7'0" $1,055 $1,113 $1,141 $1,192 $1,277 $1,372 7'2" $1,071 $1,128 $1,152 $1,202 $1,288 $1,383 8'0" $1,130 $1,174 $1,208 $1,257 $1,355 $1,440 9'0" $1,135 $1,200 $1,234 $1,290 $1,357 $1,462 10'0" $1,183 $1,252 $1,284 $1,344 $1,420 $1,509
COMPONENT FRAMES 1/2” Double Return x 2” Face x Compression Anchors
Heads16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
DBL Head
Thru 6'0" $290 $295 $300 $322 $342 $382 Over 6'0" thru 8'0" $302 $317 $322 $341 $358 $403 Over 8'0" thru 9'0" $325 $346 $351 $366 $388 $434 Over 9'0" thru 10'0" $381 $422 $428 $442 $464 $513
Heads14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Width
Thru 6'0" $333 $335 $342 $369 $386 $412 Over 6'0" thru 8'0" $342 $356 $358 $379 $405 $436 Over 8'0" thru 9'0" $374 $386 $389 $410 $434 $472 Over 9'0" thru 10'0" $431 $467 $470 $493 $512 $553
COMPONENT FRAMES 1/2” Double Return x 2” Face x Compression Anchors
Jamb Pair16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
DBL Pair
6'8" $554 $587 $608 $640 $695 $765 7'0" $561 $591 $616 $649 $703 $773 7'2" $577 $601 $627 $658 $713 $786 8'0" $629 $649 $676 $710 $766 $837 9'0" $646 $684 $693 $733 $776 $840 10'0" $683 $722 $745 $786 $831 $882
Jamb Pair14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11”thru
13 7/8”
14”thru20”Height
6'8" $610 $635 $660 $696 $753 $799 7'0" $624 $646 $671 $699 $765 $819 7'2" $640 $661 $682 $709 $776 $830 8'0" $699 $707 $738 $764 $843 $887 9'0" $704 $733 $764 $797 $845 $909 10'0" $752 $785 $814 $851 $908 $956
Frame - Strike PreparationsSurface Vertical Rod Reinforcement only $ 29 Concealed Vertical Rod (Mortise Strike) (per prep) $ 46
Label PreparationsMark Numbers No Charge U.L .Emboss (must specify) N/A U.L. Mylar Label (standard unless specified otherwise) N/A U.L. Metal Label N/A Warnock Hersey Metal Label N/A
Anchor OptionsWelded in Prepared Opening Anchor (per anchor) $ 10 Welded in Anchor (per anchor) $ 6 Punch and Dimple Only (per prep) $ 3
NOTE: Frames up to 7’0 quantity of anchors - 6 (max 8 3/4” depth) Frames over 7’0 thru 10’0 quantity of anchors - 8 (max 8 3/4” depth)
Frames over 8 3/4” depth receive double anchor quantity
Frame ConstructionUnit Bundle (3PC) $ 7 Standard Face Weld (3PC) (omit compression anchor) $ 78 Full Profile Weld (3PC) (omit compression anchor) $ 128
Special ConstructionsSpecial Width (use next larger size) No Charge Special Height (use next larger size) No Charge Mag Switch / DPS - Hole only $ 17 Mag Switch / DPS - Prep and reinf. (no junction box) $ 46 8” Junction Box Welded in $ 58 14” Junction Box Welded in $ 61 10” Junction Box Welded in Soffit $ 59
Frame Profile OptionsNo Returns No Charge Non Standard Face - see cut and notch N/A2” Face No Charge
Steel TypesCold Rolled Steel Included A60 Galvanneal $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 80 12 Gage - not available on drywall frame N/A
Hinge PreparationsSpecial Hinge Locations No Charge 4 1/2" Heavy Weight Hinge Prep No Charge Additional Hinge Prep (per hinge) $ 17 5" Standard or Heavy Weight Hinge Prep (per hinge) No Charge Electric Hinge (one 1/2" dia. Hole in one hinge reinf., no wiring included) (no junction box) $ 20
Continuous Hinge Reinforcement (Rabbet) $ 67 Power Transfer (no junction box) $ 101
Closer Preparations
Closer Reinforcement - 14 GA Plate - RA or PA $ 24 Full Depth Reinforcement (price per foot) $ 27
Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $ 192
Special Finish Preparations
Second Coat of Primer $ 83 Finish Paint Setup Charge (never waived) $ 1,179 Finish Paint (min. qty. 20 frames per color) (price includes full carton wrap) $ 189
NOTE: Finish paint unavailable on welded frames
Effective April 4, 2020
NOTE: Fire rating not available
47
Back outside
Lead LinedDoors and Frames
refer to technical data sheet No. (doors) 102l and 102m - (frames) 201 & 202
Typical construction based on DL Series door
DOORLead Thickness – 1/16” standard,
Edge Seam Construction – Visible seam (Optional continuously welded seamless or intermittently welded seamless)
Thickness – 1 3/4”
Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4”.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 10 or 16 gage steel channel projection welded at a maximum 5” on center.
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 or 14 gage steel channel projection welded at a maximum 5” on center. (Beveled lock edge 1/8” in 2” optional.)
Top Channel – Top Channel is a fl ush 16 gage steel channel, projection welded at a maximum 2 1/2” on center.
Bottom Channel – Bottom Channel is an inverted 16 gage steel channel, projection welded at a maximum 2 1/2” on center.
Cores Available – Steel Stiffened core.
Face Skins – Cold Rolled Steel or Galvannealed, 18 gage, 16 gage or 14 gage.
Closer Reinforcement (Optional) – When closer reinforcement requested 14 gage standard / 12 gage optional. (18” x 6”)
Size Availability – (Singles) Maximum 5’0” x 10’0”, (Pairs) Maximum 10’0” x 10’0”
(continued on back)
SDI 100 Level/Model – Level 2-4 Model 1-2 (Maximum Duty Performace Level A and B)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-Handed standard (Handed optional)
FRAME
Thickness – Made for standard door 1 3/4”
Gages – 16 or 14 (12 gage available with coped corner connections for welding.)
Faces – 2” standard
Standard Rabbets – 1 3/8” (actual dimension 1 9/16”); 1 3/4” (actual dimension 1 15/16”). Rabbet dimension is 3/16” greater than the door thickness.
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Size Availability – Maximum Size 4’10” x 10’0” Single; Maximum Size 9’8” x 10’0” Double.
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Strike Prep – Frames for 1 3/4” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Hinge Backset – Frame = 5/16” Door = 1/4”
Cylindrical Lock Prep
Door Hinge Prep
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Frame Detail
Lead-Line Astragal required on pairs
Welded Corner ConnectionCorner connection
Standard SillAnchor
Steel Stiffener
Door Skin
Lead
Adjustable Strap Prepared Opening Anchor
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
48
Back outside
Lead LinedDoors and Frames
refer to technical data sheet No. (doors) 102l and 102m - (frames) 201 & 202
Typical construction based on DL Series door
DOORLead Thickness – 1/16” standard,
Edge Seam Construction – Visible seam (Optional continuously welded seamless or intermittently welded seamless)
Thickness – 1 3/4”
Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4”.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 10 or 16 gage steel channel projection welded at a maximum 5” on center.
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 or 14 gage steel channel projection welded at a maximum 5” on center. (Beveled lock edge 1/8” in 2” optional.)
Top Channel – Top Channel is a fl ush 16 gage steel channel, projection welded at a maximum 2 1/2” on center.
Bottom Channel – Bottom Channel is an inverted 16 gage steel channel, projection welded at a maximum 2 1/2” on center.
Cores Available – Steel Stiffened core.
Face Skins – Cold Rolled Steel or Galvannealed, 18 gage, 16 gage or 14 gage.
Closer Reinforcement (Optional) – When closer reinforcement requested 14 gage standard / 12 gage optional. (18” x 6”)
Size Availability – (Singles) Maximum 5’0” x 10’0”, (Pairs) Maximum 10’0” x 10’0”
(continued on back)
SDI 100 Level/Model – Level 2-4 Model 1-2 (Maximum Duty Performace Level A and B)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep.
Handing Design – Non-Handed standard (Handed optional)
FRAME
Thickness – Made for standard door 1 3/4”
Gages – 16 or 14 (12 gage available with coped corner connections for welding.)
Faces – 2” standard
Standard Rabbets – 1 3/8” (actual dimension 1 9/16”); 1 3/4” (actual dimension 1 15/16”). Rabbet dimension is 3/16” greater than the door thickness.
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Size Availability – Maximum Size 4’10” x 10’0” Single; Maximum Size 9’8” x 10’0” Double.
Universal Standard/Heavy Weight Hinge – Frames for 1 3/4” doors shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Strike Prep – Frames for 1 3/4” doors shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Hinge Backset – Frame = 5/16” Door = 1/4”
Cylindrical Lock Prep
Door Hinge Prep
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Frame Detail
Lead-Line Astragal required on pairs
Welded Corner ConnectionCorner connection
Standard SillAnchor
Steel Stiffener
Door Skin
Lead
Adjustable Strap Prepared Opening Anchor
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
49
Cutout only Options
(Glass kits & Louvers)Up to
100 inch2Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place N/A N/A N/A Cutout only N/A N/A N/A Cutout with reinforcement $ 233 $ 233 $ 257
See Engineering Section for further options and / or details
DOORS
1/16” thick Lead with 20 GA Stiffeners
Width Height 18 GA 16 GA 14 GA
Thru 3’0”
Thru 7'0" $4,699 $4,820 $5,271
Thru 8'0" $4,942 $5,105 $5,521
Thru 10'0" $6,339 $6,432 $6,836
Over 3’0” thru 4’0”Thru 7'0" $4,953 $5,115 $5,533
Thru 8'0" $5,140 $5,335 $5,720 Thru 10'0" $8,003 $8,132 $8,615
Over 4’0” thru 5’0”
Thru 7'0" NA $7,208 $7,995
Thru 8'0" NA $7,428 $8,263
Thru 10'0" NA $14,204 $15,216
NOTE: Doors priced with Steel Stiffened core and 1/16” lead
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed N/A N/A N/ACutout with Kit Installed and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 Gage Doors)
N/A N/A N/A
Sunburst Kit (1/2" glass included)
N/A N/A N/A
Muntin Bar (each) N/A N/A N/AGalvanized Kit Add $ 118 $ 118 $ 118Glass Pocket Add (other than 1/4")
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Contact customer service for lead-lined lite insert add
FRAMESSINGLE OR DOUBLE RETURN - 16 GAGE
Single Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 3’0”
Thru 7'0" $3,723 $3,806 $3,897 $4,008
Thru 8'0" $3,784 $3,856 $3,947 $4,068
Thru 10'0" $3,923 $4,037 $4,128 $4,247
Over 3’0” thru 4’0”
Thru 7'0" $3,735 $3,813 $3,904 $4,025
Thru 8'0" $3,797 $3,863 $3,954 $4,073
Thru 10'0" $3,934 $4,041 $4,135 $4,255
Over 4’0” thru 5’0”
Thru 7'0" $3,772 $3,857 $3,948 $4,069
Thru 8'0" $3,833 $3,908 $3,998 $4,118
Thru 10'0" $3,972 $4,087 $4,178 $4,298
FRAMES - SINGLE OR DOUBLE RETURN - 14 GAGE
Single Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 3’0”
Thru 7'0" $3,784 $3,893 $3,996 $4,116
Thru 8'0" $3,853 $3,951 $4,054 $4,174
Thru 10'0" $4,011 $4,146 $4,249 $4,370
Over 3’0” thru 4’0”
Thru 7'0" $3,798 $3,904 $4,002 $4,122
Thru 8'0" $3,867 $3,963 $4,059 $4,179
Thru 10'0" $4,025 $4,159 $4,256 $4,376
Over 4’0” thru 5’0”
Thru 7'0" $3,857 $3,962 $4,053 $4,172
Thru 8'0" $3,904 $4,021 $4,119 $4,241
Thru 10'0" $4,084 $4,241 $4,317 $4,437
Double Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 6’0”
Thru 7'0" $3,787 $3,891 $3,979 $4,100
Thru 8'0" $3,858 $3,954 $4,042 $4,163
Thru 10'0" $4,030 $4,139 $4,229 $4,349
Over 6’0” thru 8’0”
Thru 7'0" $3,798 $3,913 $4,002 $4,122
Thru 8'0" $3,870 $3,978 $4,067 $4,186
Thru 10'0" $4,041 $4,163 $4,251 $4,372
Over 8’0” thru 10’0”
Thru 7'0" $3,835 $3,973 $4,065 $4,184
Thru 8'0" $3,909 $4,038 $4,128 $4,247
Thru 10'0" $4,078 $4,225 $4,312 $4,434
Double Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 6’0”
Thru 7'0" $3,881 $4,001 $4,100 $4,219
Thru 8'0" $3,961 $4,071 $4,170 $4,290
Thru 10'0" $4,147 $4,269 $4,367 $4,486
Over 6’0” thru 8’0”
Thru 7'0" $3,896 $4,025 $4,122 $4,243
Thru 8'0" $3,977 $4,096 $4,192 $4,311
Thru 10'0" $4,163 $4,294 $4,388 $4,510
Over 8’0” thru 10’0”
Thru 7'0" $3,934 $4,092 $4,188 $4,309
Thru 8'0" $4,016 $4,162 $4,259 $4,379
Thru 10'0" $4,203 $4,360 $4,455 $4,576
NOTES: Frames are priced as Equal or Unequal rabbet. Frames 3” - 4 1/2” Jamb depth must be single rabbet (ADD to 4 5/8” depth) For Borrowed Lite, Side Lite, and Elevation Pricing see “Cut-n-Notch Section”
Lead Options
1/16" Lead Included Included1/8" Lead (consult factory) N/A N/A
Door Frame
Steel TypesCold Rolled Steel Included Included A60 Galvanneal $85 $43 G90 Galvanized (available in 14 & 16 gage only) $354 $80
Door Frame
Hinge Preparations Door Frame
Special Hinge Locations No Charge No Charge4 1/2” Heavy Weight Hinge Prep No Charge No ChargeAdditional Hinge Prep (per hinge) $ 19 $ 17 5” Standard or Heavy Weight Hinge Prep (per hinge)
No Charge No Charge
4” Template Hinge Prep - Sq. Corner only (per hinge)
$ 46 $ 46
Anchor Hinge Prep (no drilling or tapping) $ 403 $ 250 Electric Hinge (cutout in one hinge reinf no junction box or conduit)
$ 18 $ 20
Continuous Hinge Reinforcement $ 65 $ 69 Power Transfer (cutout & reinf no junction box or conduit)
$ 101 $ 103
8” Junction Box Welded in N/A $ 58 14” Junction Box Welded in N/A $ 61 10” Junction Box Welded in Soffit N/A $ 59
Pivot Options Door Frame
Offset, Center Hung or Intermediate - Per Prep (no drilling or tapping)
$ 139 $ 135
Rescue Hardware Prep [one pivot (no drilling or tapping) and emergency stop]
N/A $ 223
Double Lipped Strike N/A $ 90Pocket Pivot - Per Prep $ 157 $ 132
Door - Lock / Frame - Strike Preparations
Door Frame
Standard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4” Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2” Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 ASA Strike $ 47 Included Rim Reinforcement only $ 40 $ 20 Rim or Mortise ED Reinforcement with Function Prep
$ 67 N/A
Surface Vertical Rod Reinforcement only $ 65 $ 26 Concealed Vertical Rod (Strike) per prep $ 481 N/A Exit Alarm Reinforcement only $ 50 $ 19 Push Pull Reinforcement $ 31 N/A
Closer Preparations Door Frame
Closer Reinforcement (frame 14 Gage plate) $ 30 $ 21 Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Special Constructions Door Frame
Undercut - under 3/8” price next larger size No Charge N/A Inverted Top Channel No Charge N/A Flush Bottom Channel No Charge N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge (not available in 20 gage)
$ 191 N/A
Bondo Filled Edge $ 90 N/A Beveled Lock Edge (1/8” in 2”) $ 23 N/A 10 Gage Hinge and 14 Gage Lock Channels (DE Series - standard on 14 gage door)
$ 122 N/A
Automatic Door Bottom (mortise type) $ 227 N/A Conduit / Raceway - no wiring $ 143 N/A
Label Preparations Door Frame
Mark Numbers No Charge No ChargeU.L. Mylar Label (standard unless specified otherwise)
N/A N/A
U.L. Metal Label N/A N/A Warnock Hersey Metal Label N/A N/A
Special Finish Preparations Door Frame
Second Coat of Primer N/A N/AFinish Paint Setup Charge (never waived) N/A N/AFinish Paint (min. qty. 20 door or frame units) (price includes full carton wrap)
N/A N/A
Anchor Options Door Frame
Welded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per prep) N/A $ 4
Frame Construction Door Frame
Unit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A $ 86 Full Profile Weld (3PC) N/A $ 141
Frame Profile Options Door Frame
Single Rabbet N/A $ 43 4” Face Heads (Sgl or Dbl) N/A $ 48 Non Standard Face - per Frame (equal faces) N/A $ 102
Double Swing Preparation Door Frame
Attaching Astragal (includes Astragal Lead-Lined) $ 568 N/A Flush Bolt Prep (ANSI 115.4) $ 68 $ 47 Surface Bolt Reinforce only $ 31 $ 21 Open Back Strike $ 126 N/A
Lead Lined Doors and Frames
FRAMES
Effective April 4, 2020
50
Cutout only Options
(Glass kits & Louvers)Up to
100 inch2Over 100 inch2 up to 800 inch2
Over 800 inch2
Panel in Place N/A N/A N/A Cutout only N/A N/A N/A Cutout with reinforcement $ 233 $ 233 $ 257
See Engineering Section for further options and / or details
DOORS
1/16” thick Lead with 20 GA Stiffeners
Width Height 18 GA 16 GA 14 GA
Thru 3’0”
Thru 7'0" $4,699 $4,820 $5,271
Thru 8'0" $4,942 $5,105 $5,521
Thru 10'0" $6,339 $6,432 $6,836
Over 3’0” thru 4’0”Thru 7'0" $4,953 $5,115 $5,533
Thru 8'0" $5,140 $5,335 $5,720 Thru 10'0" $8,003 $8,132 $8,615
Over 4’0” thru 5’0”
Thru 7'0" NA $7,208 $7,995
Thru 8'0" NA $7,428 $8,263
Thru 10'0" NA $14,204 $15,216
NOTE: Doors priced with Steel Stiffened core and 1/16” lead
Glass Kit Options
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Cutout with Kit Installed N/A N/A N/ACutout with Kit Installed and Reinforcement
$ 347 $ 435 $ 502
Republic Integral “Flush” Kit (not available with 20 Gage Doors)
N/A N/A N/A
Sunburst Kit (1/2" glass included)
N/A N/A N/A
Muntin Bar (each) N/A N/A N/AGalvanized Kit Add $ 118 $ 118 $ 118Glass Pocket Add (other than 1/4")
$ 183 $ 183 $ 183
NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Contact customer service for lead-lined lite insert add
FRAMESSINGLE OR DOUBLE RETURN - 16 GAGE
Single Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 3’0”
Thru 7'0" $3,723 $3,806 $3,897 $4,008
Thru 8'0" $3,784 $3,856 $3,947 $4,068
Thru 10'0" $3,923 $4,037 $4,128 $4,247
Over 3’0” thru 4’0”
Thru 7'0" $3,735 $3,813 $3,904 $4,025
Thru 8'0" $3,797 $3,863 $3,954 $4,073
Thru 10'0" $3,934 $4,041 $4,135 $4,255
Over 4’0” thru 5’0”
Thru 7'0" $3,772 $3,857 $3,948 $4,069
Thru 8'0" $3,833 $3,908 $3,998 $4,118
Thru 10'0" $3,972 $4,087 $4,178 $4,298
FRAMES - SINGLE OR DOUBLE RETURN - 14 GAGE
Single Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 3’0”
Thru 7'0" $3,784 $3,893 $3,996 $4,116
Thru 8'0" $3,853 $3,951 $4,054 $4,174
Thru 10'0" $4,011 $4,146 $4,249 $4,370
Over 3’0” thru 4’0”
Thru 7'0" $3,798 $3,904 $4,002 $4,122
Thru 8'0" $3,867 $3,963 $4,059 $4,179
Thru 10'0" $4,025 $4,159 $4,256 $4,376
Over 4’0” thru 5’0”
Thru 7'0" $3,857 $3,962 $4,053 $4,172
Thru 8'0" $3,904 $4,021 $4,119 $4,241
Thru 10'0" $4,084 $4,241 $4,317 $4,437
Double Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 6’0”
Thru 7'0" $3,787 $3,891 $3,979 $4,100
Thru 8'0" $3,858 $3,954 $4,042 $4,163
Thru 10'0" $4,030 $4,139 $4,229 $4,349
Over 6’0” thru 8’0”
Thru 7'0" $3,798 $3,913 $4,002 $4,122
Thru 8'0" $3,870 $3,978 $4,067 $4,186
Thru 10'0" $4,041 $4,163 $4,251 $4,372
Over 8’0” thru 10’0”
Thru 7'0" $3,835 $3,973 $4,065 $4,184
Thru 8'0" $3,909 $4,038 $4,128 $4,247
Thru 10'0" $4,078 $4,225 $4,312 $4,434
Double Frame Jamb Depth
Width Height4 5/8” thru
5 3/4”
5 7/8” thru
8 3/4”
8 7/8” thru
14 3/4”
14 7/8” thru 20”
Thru 6’0”
Thru 7'0" $3,881 $4,001 $4,100 $4,219
Thru 8'0" $3,961 $4,071 $4,170 $4,290
Thru 10'0" $4,147 $4,269 $4,367 $4,486
Over 6’0” thru 8’0”
Thru 7'0" $3,896 $4,025 $4,122 $4,243
Thru 8'0" $3,977 $4,096 $4,192 $4,311
Thru 10'0" $4,163 $4,294 $4,388 $4,510
Over 8’0” thru 10’0”
Thru 7'0" $3,934 $4,092 $4,188 $4,309
Thru 8'0" $4,016 $4,162 $4,259 $4,379
Thru 10'0" $4,203 $4,360 $4,455 $4,576
NOTES: Frames are priced as Equal or Unequal rabbet. Frames 3” - 4 1/2” Jamb depth must be single rabbet (ADD to 4 5/8” depth) For Borrowed Lite, Side Lite, and Elevation Pricing see “Cut-n-Notch Section”
Lead Options
1/16" Lead Included Included1/8" Lead (consult factory) N/A N/A
Door Frame
Steel TypesCold Rolled Steel Included Included A60 Galvanneal $85 $43 G90 Galvanized (available in 14 & 16 gage only) $354 $80
Door Frame
Hinge Preparations Door Frame
Special Hinge Locations No Charge No Charge4 1/2” Heavy Weight Hinge Prep No Charge No ChargeAdditional Hinge Prep (per hinge) $ 19 $ 17 5” Standard or Heavy Weight Hinge Prep (per hinge)
No Charge No Charge
4” Template Hinge Prep - Sq. Corner only (per hinge)
$ 46 $ 46
Anchor Hinge Prep (no drilling or tapping) $ 403 $ 250 Electric Hinge (cutout in one hinge reinf no junction box or conduit)
$ 18 $ 20
Continuous Hinge Reinforcement $ 65 $ 69 Power Transfer (cutout & reinf no junction box or conduit)
$ 101 $ 103
8” Junction Box Welded in N/A $ 58 14” Junction Box Welded in N/A $ 61 10” Junction Box Welded in Soffit N/A $ 59
Pivot Options Door Frame
Offset, Center Hung or Intermediate - Per Prep (no drilling or tapping)
$ 139 $ 135
Rescue Hardware Prep [one pivot (no drilling or tapping) and emergency stop]
N/A $ 223
Double Lipped Strike N/A $ 90Pocket Pivot - Per Prep $ 157 $ 132
Door - Lock / Frame - Strike Preparations
Door Frame
Standard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4” Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2” Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 ASA Strike $ 47 Included Rim Reinforcement only $ 40 $ 20 Rim or Mortise ED Reinforcement with Function Prep
$ 67 N/A
Surface Vertical Rod Reinforcement only $ 65 $ 26 Concealed Vertical Rod (Strike) per prep $ 481 N/A Exit Alarm Reinforcement only $ 50 $ 19 Push Pull Reinforcement $ 31 N/A
Closer Preparations Door Frame
Closer Reinforcement (frame 14 Gage plate) $ 30 $ 21 Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Special Constructions Door Frame
Undercut - under 3/8” price next larger size No Charge N/A Inverted Top Channel No Charge N/A Flush Bottom Channel No Charge N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge (not available in 20 gage)
$ 191 N/A
Bondo Filled Edge $ 90 N/A Beveled Lock Edge (1/8” in 2”) $ 23 N/A 10 Gage Hinge and 14 Gage Lock Channels (DE Series - standard on 14 gage door)
$ 122 N/A
Automatic Door Bottom (mortise type) $ 227 N/A Conduit / Raceway - no wiring $ 143 N/A
Label Preparations Door Frame
Mark Numbers No Charge No ChargeU.L. Mylar Label (standard unless specified otherwise)
N/A N/A
U.L. Metal Label N/A N/A Warnock Hersey Metal Label N/A N/A
Special Finish Preparations Door Frame
Second Coat of Primer N/A N/AFinish Paint Setup Charge (never waived) N/A N/AFinish Paint (min. qty. 20 door or frame units) (price includes full carton wrap)
N/A N/A
Anchor Options Door Frame
Welded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per prep) N/A $ 4
Frame Construction Door Frame
Unit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A $ 86 Full Profile Weld (3PC) N/A $ 141
Frame Profile Options Door Frame
Single Rabbet N/A $ 43 4” Face Heads (Sgl or Dbl) N/A $ 48 Non Standard Face - per Frame (equal faces) N/A $ 102
Double Swing Preparation Door Frame
Attaching Astragal (includes Astragal Lead-Lined) $ 568 N/A Flush Bolt Prep (ANSI 115.4) $ 68 $ 47 Surface Bolt Reinforce only $ 31 $ 21 Open Back Strike $ 126 N/A
Lead Lined Doors and Frames
FRAMES
Effective April 4, 2020
51
Front outside
Back outside
Bullet ResistantDoors and Frames
refer to technical data sheet No. (doors) 102d,e,f,g - (frames) 201c,d,e,f
Door Thickness – 1 13/16” (+/- 1/16”)
Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4”.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 10 gage steel channel projection welded at a maximum 5” on center. (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 14 gage steel channel projection welded at a maximum 5” on center. 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 Standards.
Top Channel – Top Channel is a fl ush 16 gage channel, projection welded at a maximum 2 1/2” on center.
Bottom Channel – Bottom Channel is an inverted 16 gage steel channel, projection welded at a maximum 2 1/2” on center.
Cores Available – Level 1&6 / Polystyrene - Levels 2-5, 7-8 / Polystyrene with armor plating.
Face Skins – 14 gage (cold rolled steel or A60 Galvannealed)
Closer Reinforcement (Optional) - Only available on Level 1.
Size Availability – Minimum 1’0” x 1’0”, Maximum 5’0” x 10’0”
SDI 100 Level/Model – Level 4 Model 1 or 2
(continued on back)
Universal Standard/Heavy Weight Hinge– Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep. Level 1, 2, 3 and 6 come standard with 4 1/2” hinges up to 3480 doors – Levels 4, 5, 7 and 8 are recommended to be prepped for continuous geared hinge.
Handing Design – Non-Handed (Handed optional)
FRAME
Frame Thickness – Made to accommodate 14 gage door - 2” rabbet (+/- 1/16”)
Gages – 14 gage only
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Universal Standard/Heavy Weight Hinge– Frames shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Strike Prep – Frames shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Hinge Backset –Frame = 5/16” Door = 1/4”
Backbend – 7/16” (Single Return)
Anchors – Masonry wire, T and existing opening punch and dimple. Sill anchors are included with all ME frames (welded or sill anchor)
Silencer Prep – 9/32” dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.
Double Heads – Double heads are undersized 1/16”
Mortar Guards – Mortar guards of 26 gage steel shall be welded to each hinge and strike reinforcement plate.
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet
Handing – Frames are handed.
Welded Corner Connection
XXXXXXXXXXXXXXXXXX
Corner Connection
Integral Design FlushGlass Kit
Level 2-3 BR Frame Level 4, 5, 7 & 8 BR Frame
Prepared Opening AnchorAdjustable Strap Masonry Wire
Level No. of Shots
Ammunition Grain Min.Velocity Results
1 19 9mm full metal copper jacket 124 1,256 fps Pass
3 19 .44 Magnum lead semi-wad cutter gas checked
240 1,350 fps Pass
4 19 .30 caliber rifl e lead cor 180 2,540 fps Pass
5 5 7.62mm rifl e full metal jacket military ball
150 2,750 fps Pass
6 5 9mm full metal jacket 124 1,400 fps Pass
7 12 5.56mm rifl e full metal jacket 55 3,080 fps Pass
8 12 7.62mm rifl e full metal jacket military ball
150 2,750 fps Pass
Supplementary Shotgun
3 12 ga. Rifl ed lead slug 437 1,585 fps Pass
Standard Sill Anchor 155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
52
Front outside
Back outside
Bullet ResistantDoors and Frames
refer to technical data sheet No. (doors) 102d,e,f,g - (frames) 201c,d,e,f
Door Thickness – 1 13/16” (+/- 1/16”)
Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is 3/4”.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 10 gage steel channel projection welded at a maximum 5” on center. (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 14 gage steel channel projection welded at a maximum 5” on center. 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 Standards.
Top Channel – Top Channel is a fl ush 16 gage channel, projection welded at a maximum 2 1/2” on center.
Bottom Channel – Bottom Channel is an inverted 16 gage steel channel, projection welded at a maximum 2 1/2” on center.
Cores Available – Level 1&6 / Polystyrene - Levels 2-5, 7-8 / Polystyrene with armor plating.
Face Skins – 14 gage (cold rolled steel or A60 Galvannealed)
Closer Reinforcement (Optional) - Only available on Level 1.
Size Availability – Minimum 1’0” x 1’0”, Maximum 5’0” x 10’0”
SDI 100 Level/Model – Level 4 Model 1 or 2
(continued on back)
Universal Standard/Heavy Weight Hinge– Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep. Level 1, 2, 3 and 6 come standard with 4 1/2” hinges up to 3480 doors – Levels 4, 5, 7 and 8 are recommended to be prepped for continuous geared hinge.
Handing Design – Non-Handed (Handed optional)
FRAME
Frame Thickness – Made to accommodate 14 gage door - 2” rabbet (+/- 1/16”)
Gages – 14 gage only
Stop – 5/8” standard
Closer Reinforcement (Optional) – 1 3/8” x 14” x 14 gage plate.
Universal Standard/Heavy Weight Hinge– Frames shall have a 7 gage steel hinge reinforcement plate, projection welded with provisions for 4 1/2” x 4 1/2” template hinges. Hinge plate is designed to be modifi ed to accept a heavy weight hinge by removing spacer plate.
Strike Prep – Frames shall have a 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provisions for Universal ANSI A115.1 or ANSI A115.2 strike (4 7/8”).
Hinge Backset –Frame = 5/16” Door = 1/4”
Backbend – 7/16” (Single Return)
Anchors – Masonry wire, T and existing opening punch and dimple. Sill anchors are included with all ME frames (welded or sill anchor)
Silencer Prep – 9/32” dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.
Double Heads – Double heads are undersized 1/16”
Mortar Guards – Mortar guards of 26 gage steel shall be welded to each hinge and strike reinforcement plate.
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet
Handing – Frames are handed.
Welded Corner Connection
XXXXXXXXXXXXXXXXXX
Corner Connection
Integral Design FlushGlass Kit
Level 2-3 BR Frame Level 4, 5, 7 & 8 BR Frame
Prepared Opening AnchorAdjustable Strap Masonry Wire
Level No. of Shots
Ammunition Grain Min.Velocity Results
1 19 9mm full metal copper jacket 124 1,256 fps Pass
3 19 .44 Magnum lead semi-wad cutter gas checked
240 1,350 fps Pass
4 19 .30 caliber rifl e lead cor 180 2,540 fps Pass
5 5 7.62mm rifl e full metal jacket military ball
150 2,750 fps Pass
6 5 9mm full metal jacket 124 1,400 fps Pass
7 12 5.56mm rifl e full metal jacket 55 3,080 fps Pass
8 12 7.62mm rifl e full metal jacket military ball
150 2,750 fps Pass
Supplementary Shotgun
3 12 ga. Rifl ed lead slug 437 1,585 fps Pass
Standard Sill Anchor 155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
53
Bullet Resistant / Doors and Frames DE and ME Series
See Engineering Section for further options and / or details
SINGLESFRAMES - SINGLE OR DOUBLE
RETURN 14 GAGE
5 3/4”5 7/8” thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8” thru 20”Level Width Height Door
1 - 6
Thru 3'0"
7' 0" $2,502 $566 $665 $759 $867 8' 0" $2,752 $630 $719 $811 $920
10' 0" $2,983 $774 $896 $990 $1,100
Over 3'0" thru 4'0"7' 0" $2,763 $580 $676 $766 $875 8' 0" $2,950 $641 $730 $818 $927 10' 0" $3,181 $786 $907 $996 $1,105
Over 4'0" thru 5'0"
7' 0" $5,461 $634 $728 $820 $929 8' 0" $5,728 $698 $782 $873 $981 10' 0" $5,959 $841 $960 $1,050 $1,159
2-3
Thru 3'0"
7' 0" $2,840 $697 $792 $888 $997 8' 0" $3,090 $759 $848 $940 $1,049 10' 0" $3,321 $902 $1,026 $1,119 $1,228
Over 3'0" thru 4'0"
7' 0" $3,101 $708 $806 $894 $1,003 8' 0" $3,288 $771 $859 $946 $1,055 10' 0" $3,519 $915 $1,036 $1,124 $1,234
Over 4'0" thru 5'0"
7' 0" $5,799 $763 $857 $949 $1,057 8' 0" $6,066 $825 $911 $1,001 $1,110 10' 0" $6,297 $969 $1,088 $1,179 $1,289
4
Thru 3'0"
7' 0" $8,074 $2,451 $2,548 $2,643 $2,752 8' 0" $8,324 $2,514 $2,602 $2,696 $2,805 10' 0" $8,555 $2,658 $2,781 $2,873 $2,982
Over 3'0" thru 4'0"
7' 0" $8,335 $2,463 $2,560 $2,648 $2,757 8' 0" $8,522 $2,523 $2,614 $2,701 $2,810 10' 0" $17,713 $2,669 $2,791 $2,880 $2,989
Over 4'0" thru 5'0"
7' 0" $11,032 $2,518 $2,613 $2,703 $2,814 8' 0" $11,300 $2,581 $2,666 $2,755 $2,865 10' 0" $21,700 $2,723 $2,843 $2,935 $3,044
5
Thru 3'0"
7' 0" $8,918 $2,451 $2,548 $2,643 $2,752 8' 0" $9,168 $2,514 $2,602 $2,696 $2,805 10' 0" $12,822 $2,658 $2,781 $2,873 $2,982
Over 3'0" thru 4'0"
7' 0" $9,179 $2,463 $2,560 $2,648 $2,757 8' 0" $9,366 $2,523 $2,614 $2,701 $2,810 10' 0" $17,713 $2,669 $2,791 $2,880 $2,989
Over 4'0" thru 5'0"
7' 0" $11,877 $2,518 $2,613 $2,703 $2,814 8' 0" $12,144 $2,581 $2,666 $2,755 $2,865 10' 0" $21,700 $2,723 $2,843 $2,935 $3,044
7- 8
Thru 3'0"
7' 0" $13,139 $2,451 $2,548 $2,643 $2,752 8' 0" $13,389 $2,514 $2,602 $2,696 $2,805 10' 0" $15,386 $2,658 $2,781 $2,873 $2,982
Over 3'0" thru 4'0"
7' 0" $13,400 $2,463 $2,560 $2,648 $2,757 8' 0" $13,587 $2,523 $2,614 $2,701 $2,810 10' 0" $17,713 $2,669 $2,791 $2,880 $2,989
Over 4'0" thru 5'0"
7' 0" $16,097 $2,518 $2,613 $2,703 $2,814 8' 0" $16,365 $2,581 $2,666 $2,755 $2,865 10' 0" $21,700 $2,723 $2,843 $2,935 $3,044
DOUBLES FRAMES - SINGLE OR DOUBLE
RETURN 14 GAGE
5 3/4”5 7/8” thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8” thru 20”Level Width Height
1
Thru 6'0"
7' 0" $647 $746 $839 $948 8' 0" $719 $811 $900 $1,011
10' 0" $889 $992 $1,081 $1,190
Over 6'0" thru 8'0"
7' 0" $655 $764 $854 $963 8' 0" $727 $828 $917 $1,027 10' 0" $897 $1,008 $1,097 $1,206
Over 8'0" thru 10'0"
7' 0" $669 $786 $875 $983 8' 0" $742 $850 $937 $1,047 10' 0" $913 $1,030 $1,118 $1,227
2 - 3
Thru 6'0"
7' 0" $775 $876 $967 $1,076 8' 0" $848 $940 $1,030 $1,140 10' 0" $1,017 $1,120 $1,209 $1,318
Over 6'0" thru 8'0"
7' 0" $784 $893 $982 $1,091 8' 0" $856 $958 $1,046 $1,155 10' 0" $1,027 $1,137 $1,226 $1,335
Over 8'0" thru 10'0"
7' 0" $798 $915 $1,095 $1,113 8' 0" $872 $979 $1,158 $1,176 10' 0" $1,040 $1,158 $1,339 $1,356
NOTE: Doubles available up to Level 3 maximum
NOTE: Frames are priced 14 gage, CRS, Doors are priced 14 gage, CRS
Closer Preparation Door FrameCloser Reinforcement $ 30 $ 21
Frame Construction Door FrameUnit Bundle (3PC) N/A N/A Standard Face Weld (3PC) N/A Included Full Profile Weld (3PC) N/A $ 141
Glass Kit Options
Up to & includingLevel 3 only
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Anemostat BR7 Kit $ 1,322 $ 2,166 N/ANOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Frame Profile Options Door FrameSingle Rabbet (waived at 10 units) NA $ 434" Face Heads (Sgl or Dbl) NA $ 48Non Standard Face - per Frame NA $ 102
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $85 $43 G90 Galvanized (available in 14 & 16 gage only) $354 $80
Door Frame
Hinge Preparations Door Frame
Special Hinge Locations No Charge No Charge4 1/2" Heavy Weight Hinge Prep No Charge No ChargeAdditional Hinge Prep (per hinge) $ 19 $ 17 5" Standard or Heavy Weight Hinge Prep (per hinge)
No Charge No Charge
4" Template Hinge Prep - Sq. Corner only (per hinge)
$ 46 $ 46
Anchor Hinge Prep (no drilling or tapping (per hinge)
$ 403 $ 250
Electric Hinge (cutout in one hinge reinf) (no junction box or conduit)
$ 18 $ 20
Continuous Hinge Reinforcement $ 65 $ 69 Power Transfer (no junction box or conduit) $ 101 $ 103 8" Junction Box Welded in N/A $ 58 14" Junction Box Welded in N/A $ 61 10" Junction Box Welded in Soffit N/A $ 59
Door FrameDoor - Lock / Frame - Strike Preparations
Standard Lock (Strike) at Non Standard Location No Charge No Charge2 3/4” Lipped strike in lieu of 4 7/8” N/A No charge Cylindrical Dead Lock (2 3/4” Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2” Strike) $ 66 $ 45 Electric Strike (no conduit / no junction box) $ 106 $ 65 ASA Strike $ 47 No ChargeRim Reinforcement only $ 40 $ 20 Surface Vertical Rod Reinforcement only $ 65 $ 26 Concealed Vertical Rod (Strike) (per prep) $ 481 N/A Exit Alarm Reinforcement only $ 50 $ 19 Push Pull Reinforcement $ 31 N/A
Special Constructions Door FrameUndercut - under 3/8” price next larger size No Charge N/A Inverted Top Channel No Charge N/A Flush Bottom Channel No Charge N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Continuous Welded Edge $ 191 N/A Bondo Filled Edge $ 90 N/A Beveled Lock Edge (1/8” in 2”) N/A N/A 10 Gage Hinge and 14 Gage Lock Channels (DE Series - standard on 14 gage door)
Included N/A
Mail Slot $ 183 N/A Automatic Door Bottom (mortise type) $ 227 N/A Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Conduit / Raceway - no wiring $ 143 N/A
Label Preparations Door FrameMark Numbers No Charge No ChargeUL Mylar Label - Level 1 only (standard unless specified otherwise)
$ 17 $ 17
UL Metal Label - Level 1 only $ 32 $ 28 Warnock Hersey Metal Label - Level 1 only $ 32 $ 28
Special Finish Preparations Door FrameSecond Coat of Primer N/A N/AFinish Paint Setup Charge (never waived) N/A N/AFinish Paint (min. qty. 20 color) (price includes full carton wrap)
N/A N/A
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor)
N/A $ 14
Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per prep) N/A $ 4
Frames up to 7’0” - quantity of anchors = 6 (max 8 3/4” depth)Frames over 7’0” thru 10’0” - quantity of anchors = 8 (max 8 3/4” depth)
Jamb depths over 8 3/4” will have (2) anchors per location
Double Swing Preparation Door FrameAttaching Astragal (includes Bullet Astragal) $ 568 N/A Flush Bolt Prep (ANSI 115.4) $ 68 $ 47 Surface Bolt Reinforce only $ 31 $ 21 Open Back Strike $ 126 N/A
Effective April 4, 2020
54
Bullet Resistant / Doors and Frames DE and ME Series
See Engineering Section for further options and / or details
SINGLESFRAMES - SINGLE OR DOUBLE
RETURN 14 GAGE
5 3/4”5 7/8” thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8” thru 20”Level Width Height Door
1 - 6
Thru 3'0"
7' 0" $2,502 $566 $665 $759 $867 8' 0" $2,752 $630 $719 $811 $920
10' 0" $2,983 $774 $896 $990 $1,100
Over 3'0" thru 4'0"7' 0" $2,763 $580 $676 $766 $875 8' 0" $2,950 $641 $730 $818 $927 10' 0" $3,181 $786 $907 $996 $1,105
Over 4'0" thru 5'0"
7' 0" $5,461 $634 $728 $820 $929 8' 0" $5,728 $698 $782 $873 $981 10' 0" $5,959 $841 $960 $1,050 $1,159
2-3
Thru 3'0"
7' 0" $2,840 $697 $792 $888 $997 8' 0" $3,090 $759 $848 $940 $1,049 10' 0" $3,321 $902 $1,026 $1,119 $1,228
Over 3'0" thru 4'0"
7' 0" $3,101 $708 $806 $894 $1,003 8' 0" $3,288 $771 $859 $946 $1,055 10' 0" $3,519 $915 $1,036 $1,124 $1,234
Over 4'0" thru 5'0"
7' 0" $5,799 $763 $857 $949 $1,057 8' 0" $6,066 $825 $911 $1,001 $1,110 10' 0" $6,297 $969 $1,088 $1,179 $1,289
4
Thru 3'0"
7' 0" $8,074 $2,451 $2,548 $2,643 $2,752 8' 0" $8,324 $2,514 $2,602 $2,696 $2,805 10' 0" $8,555 $2,658 $2,781 $2,873 $2,982
Over 3'0" thru 4'0"
7' 0" $8,335 $2,463 $2,560 $2,648 $2,757 8' 0" $8,522 $2,523 $2,614 $2,701 $2,810 10' 0" $17,713 $2,669 $2,791 $2,880 $2,989
Over 4'0" thru 5'0"
7' 0" $11,032 $2,518 $2,613 $2,703 $2,814 8' 0" $11,300 $2,581 $2,666 $2,755 $2,865 10' 0" $21,700 $2,723 $2,843 $2,935 $3,044
5
Thru 3'0"
7' 0" $8,918 $2,451 $2,548 $2,643 $2,752 8' 0" $9,168 $2,514 $2,602 $2,696 $2,805 10' 0" $12,822 $2,658 $2,781 $2,873 $2,982
Over 3'0" thru 4'0"
7' 0" $9,179 $2,463 $2,560 $2,648 $2,757 8' 0" $9,366 $2,523 $2,614 $2,701 $2,810 10' 0" $17,713 $2,669 $2,791 $2,880 $2,989
Over 4'0" thru 5'0"
7' 0" $11,877 $2,518 $2,613 $2,703 $2,814 8' 0" $12,144 $2,581 $2,666 $2,755 $2,865 10' 0" $21,700 $2,723 $2,843 $2,935 $3,044
7- 8
Thru 3'0"
7' 0" $13,139 $2,451 $2,548 $2,643 $2,752 8' 0" $13,389 $2,514 $2,602 $2,696 $2,805 10' 0" $15,386 $2,658 $2,781 $2,873 $2,982
Over 3'0" thru 4'0"
7' 0" $13,400 $2,463 $2,560 $2,648 $2,757 8' 0" $13,587 $2,523 $2,614 $2,701 $2,810 10' 0" $17,713 $2,669 $2,791 $2,880 $2,989
Over 4'0" thru 5'0"
7' 0" $16,097 $2,518 $2,613 $2,703 $2,814 8' 0" $16,365 $2,581 $2,666 $2,755 $2,865 10' 0" $21,700 $2,723 $2,843 $2,935 $3,044
DOUBLES FRAMES - SINGLE OR DOUBLE
RETURN 14 GAGE
5 3/4”5 7/8” thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8” thru 20”Level Width Height
1
Thru 6'0"
7' 0" $647 $746 $839 $948 8' 0" $719 $811 $900 $1,011
10' 0" $889 $992 $1,081 $1,190
Over 6'0" thru 8'0"
7' 0" $655 $764 $854 $963 8' 0" $727 $828 $917 $1,027 10' 0" $897 $1,008 $1,097 $1,206
Over 8'0" thru 10'0"
7' 0" $669 $786 $875 $983 8' 0" $742 $850 $937 $1,047 10' 0" $913 $1,030 $1,118 $1,227
2 - 3
Thru 6'0"
7' 0" $775 $876 $967 $1,076 8' 0" $848 $940 $1,030 $1,140 10' 0" $1,017 $1,120 $1,209 $1,318
Over 6'0" thru 8'0"
7' 0" $784 $893 $982 $1,091 8' 0" $856 $958 $1,046 $1,155 10' 0" $1,027 $1,137 $1,226 $1,335
Over 8'0" thru 10'0"
7' 0" $798 $915 $1,095 $1,113 8' 0" $872 $979 $1,158 $1,176 10' 0" $1,040 $1,158 $1,339 $1,356
NOTE: Doubles available up to Level 3 maximum
NOTE: Frames are priced 14 gage, CRS, Doors are priced 14 gage, CRS
Closer Preparation Door FrameCloser Reinforcement $ 30 $ 21
Frame Construction Door FrameUnit Bundle (3PC) N/A N/A Standard Face Weld (3PC) N/A Included Full Profile Weld (3PC) N/A $ 141
Glass Kit Options
Up to & includingLevel 3 only
Vision / Narrow Lite up to 100 inch2
Half Glass over 100 inch2 up to
800 inch2
Full Glass over
800 inch2
Anemostat BR7 Kit $ 1,322 $ 2,166 N/ANOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Frame Profile Options Door FrameSingle Rabbet (waived at 10 units) NA $ 434" Face Heads (Sgl or Dbl) NA $ 48Non Standard Face - per Frame NA $ 102
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $85 $43 G90 Galvanized (available in 14 & 16 gage only) $354 $80
Door Frame
Hinge Preparations Door Frame
Special Hinge Locations No Charge No Charge4 1/2" Heavy Weight Hinge Prep No Charge No ChargeAdditional Hinge Prep (per hinge) $ 19 $ 17 5" Standard or Heavy Weight Hinge Prep (per hinge)
No Charge No Charge
4" Template Hinge Prep - Sq. Corner only (per hinge)
$ 46 $ 46
Anchor Hinge Prep (no drilling or tapping (per hinge)
$ 403 $ 250
Electric Hinge (cutout in one hinge reinf) (no junction box or conduit)
$ 18 $ 20
Continuous Hinge Reinforcement $ 65 $ 69 Power Transfer (no junction box or conduit) $ 101 $ 103 8" Junction Box Welded in N/A $ 58 14" Junction Box Welded in N/A $ 61 10" Junction Box Welded in Soffit N/A $ 59
Door FrameDoor - Lock / Frame - Strike Preparations
Standard Lock (Strike) at Non Standard Location No Charge No Charge2 3/4” Lipped strike in lieu of 4 7/8” N/A No charge Cylindrical Dead Lock (2 3/4” Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2” Strike) $ 66 $ 45 Electric Strike (no conduit / no junction box) $ 106 $ 65 ASA Strike $ 47 No ChargeRim Reinforcement only $ 40 $ 20 Surface Vertical Rod Reinforcement only $ 65 $ 26 Concealed Vertical Rod (Strike) (per prep) $ 481 N/A Exit Alarm Reinforcement only $ 50 $ 19 Push Pull Reinforcement $ 31 N/A
Special Constructions Door FrameUndercut - under 3/8” price next larger size No Charge N/A Inverted Top Channel No Charge N/A Flush Bottom Channel No Charge N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Continuous Welded Edge $ 191 N/A Bondo Filled Edge $ 90 N/A Beveled Lock Edge (1/8” in 2”) N/A N/A 10 Gage Hinge and 14 Gage Lock Channels (DE Series - standard on 14 gage door)
Included N/A
Mail Slot $ 183 N/A Automatic Door Bottom (mortise type) $ 227 N/A Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Conduit / Raceway - no wiring $ 143 N/A
Label Preparations Door FrameMark Numbers No Charge No ChargeUL Mylar Label - Level 1 only (standard unless specified otherwise)
$ 17 $ 17
UL Metal Label - Level 1 only $ 32 $ 28 Warnock Hersey Metal Label - Level 1 only $ 32 $ 28
Special Finish Preparations Door FrameSecond Coat of Primer N/A N/AFinish Paint Setup Charge (never waived) N/A N/AFinish Paint (min. qty. 20 color) (price includes full carton wrap)
N/A N/A
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor)
N/A $ 14
Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per prep) N/A $ 4
Frames up to 7’0” - quantity of anchors = 6 (max 8 3/4” depth)Frames over 7’0” thru 10’0” - quantity of anchors = 8 (max 8 3/4” depth)
Jamb depths over 8 3/4” will have (2) anchors per location
Double Swing Preparation Door FrameAttaching Astragal (includes Bullet Astragal) $ 568 N/A Flush Bolt Prep (ANSI 115.4) $ 68 $ 47 Surface Bolt Reinforce only $ 31 $ 21 Open Back Strike $ 126 N/A
Effective April 4, 2020
55
Door Notes:1. 3-Sided, minimum size 3’0” x 6’8” / maximun size 8’0” x 8’0”
2. 4-Sided, minimum size 2’8” x 4’3” / maximum size 8’0” x 8’0”
3. Glass light assembly only available with standard factory installed glass
4. All hardware functions must be specifi ed
5. Paired opening prices shown are for applications with or without astragals
6. 3/4” standard for 1/2” ADA saddle threshold. Typical undercut must provide 1/4” max between bottom of door and top of fi nished fl oor/threshold; critical distance-bottom of door to top of strike 1/8-1/4” for LM and 1/8” for WS devices.
Frame Notes:1. Jamb Depths: All DF Series frames are double rabbet only with 1/2” returns. Max 14 3/4”. All frames listed are available in jamb depth increments of 1/8”.
2. Door Opening Sizes: Standard frame sizes are listed. Any non-standard frame width and/or height is priced as the next larger size frame category. Available sizes displayed.
3. Only available in 2” face with 2” or 4” face heads.
4. Case open frames are not available.
5. New Masonry anchors (Masonry T) and Existing Masonry anchors (installed Tube and Strap with punch and dimple) are required and will be added to the end of your order based on opening size and wall construction.
DF SeriesTornado Resistant
Effective April 4, 2020
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
DF Series DF Series
3-Sided & Glass Door Pricing
Door Width 14 Gage
UP TO 6’8” HIGH3'0" thru 4'0" $5,408 6'0" thru 8'0" $10,816
UP TO 7’0” HIGH3'0" thru 4'0" $5,625 6'0" thru 8'0" $11,250
UP TO 7’2” HIGH3'0" thru 4'0" $6,126 6'0" thru 8'0" $12,252
UP TO 8’0” HIGH3'0" thru 4'0" $6,624 6'0" thru 8'0" $13,248
*4-Sided & Shutter Pricing
Door Width 14 Gage
UP TO 6’8” HIGH2'8" thru 4'0" $5,408 5'4" thru 8'0" $10,816
UP TO 7’0” HIGH2'8" thru 4'0" $5,625 5'4" thru 8'0" $11,250
UP TO 7’2” HIGH2'8" thru 4'0" $6,126 5'4" thru 8'0" $12,252
UP TO 8’0” HIGH2'8" thru 4'0" $6,624 5'4" thru 8'0" $13,248
DF SeriesDF14 Complete Frame Pricing
Single Frame Jamb Depth
Width Height5 3/4”thru
5 7/8”
6”thru
7 7/8”
8”thru
9 7/8”
10”thru
10 3/4”
2’8”thru4’0”
6'8" $610 $660 $714 $767
7'0" $654 $700 $757 $805
7'2" $725 $770 $827 $875 8'0" $793 $838 $895 $944
Double Frame Jamb Depth
Width Height5 3/4”thru
5 7/8”
6”thru
7 7/8”
8”thru
9 7/8”
10”thru
10 3/4”
5’4”thru8’0”
6'8" $764 $817 $869 $919
7'0" $800 $849 $903 $951
7'2" $870 $915 $975 $1,021 8'0" $936 $985 $1,043 $1,089
Single Pair
Min. Max. Min. Max.
3’0” x 6’8” 4’0” x 8’0” 6’0” x 6’8” 8’0” x 8’0”
2’8” x 4’3” 4’0” x 8’0” 5’4” x 4’3” 8’0” x 8’0”
Labeled Door Single PairUL: N/A N/AITS/WHI: Metal Label (includes closer reinf.) *3, 1 1/2, 1, 3/4 hour or 20 min.
$ 68 $ 136
FM: N/A N/AICC500-2014/FEMA 361/320 Label N/C N/C
Labeled Frame Single PairUL: N/A N/AITS/WHI: Metal Label (includes closer reinf.) *3, 1 1/2, 1, 3/4 hour or 20 min.
$ 75 $ 75
FM: N/A N/AICC500-2014/FEMA 361/320 Label N/C N/C
Standard Construction Doors
Standard Construction Frames
Galvanized A-60 Steel IncludedGalvanized G-90 Steel N/AEdge Seam Construction (Welded and Seam fi lled) Included12 GA Top Channel as Top Cap IncludedMark Numbers N/CDutch Door N/A*Lock/Latch with Astragal per/pair $ 89Lock/Latch without Astragal per/pair $ 89Push Pull without Astragal N/A**Glass Light Assy: Vision (V) non-label (9 1/2”x9 1/2”) $ 4,336**Glass Light Assy: Vision (VF) label (9 1/2”x9 1/2”) $ 8,549**Glass Light Assy: Narrow (N) non-label (4 1/8”x 26 11/16”) $ 4,697**Glass Light Assy: Narrow (NF) label (4 1/8”x 26 11/16”) $ 8,910
Galvannealed A-60 Steel N/C4” Face Head $ 44Mark Numbers N/CDutch Frame N/ACommunicating Frame N/ASpecial Profi le Frames N/AHospital Stops N/AAnchors: Masonry-T N/CAnchors: Weld-in base N/C*Tube & Strap anchor, P&D, Factory Installation $ 27.50*Bolts for 2” face jambs and heads $ 8*Bolts for 4” face heads $ 124 Sided frame, add for sill section $ 8812 Gauge Head Reinforcing Channel Included
* Available as Flush doors only; no glass allowed
* Not recommended with panic exit hardware)** Factory installed and approved Glass and Trim, 3-Sided Only (no shutters)
* Glass lights rated up to 1 1/2 hours max.
* Glass lights rated up to 1 1/2 hours max.
* Existing Masonry (MUST specify wall type on order) EMA TSONC, EMA TSBLOCK
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
56
Door Notes:1. 3-Sided, minimum size 3’0” x 6’8” / maximun size 8’0” x 8’0”
2. 4-Sided, minimum size 2’8” x 4’3” / maximum size 8’0” x 8’0”
3. Glass light assembly only available with standard factory installed glass
4. All hardware functions must be specifi ed
5. Paired opening prices shown are for applications with or without astragals
6. 3/4” standard for 1/2” ADA saddle threshold. Typical undercut must provide 1/4” max between bottom of door and top of fi nished fl oor/threshold; critical distance-bottom of door to top of strike 1/8-1/4” for LM and 1/8” for WS devices.
Frame Notes:1. Jamb Depths: All DF Series frames are double rabbet only with 1/2” returns. Max 14 3/4”. All frames listed are available in jamb depth increments of 1/8”.
2. Door Opening Sizes: Standard frame sizes are listed. Any non-standard frame width and/or height is priced as the next larger size frame category. Available sizes displayed.
3. Only available in 2” face with 2” or 4” face heads.
4. Case open frames are not available.
5. New Masonry anchors (Masonry T) and Existing Masonry anchors (installed Tube and Strap with punch and dimple) are required and will be added to the end of your order based on opening size and wall construction.
DF SeriesTornado Resistant
Effective April 4, 2020
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
DF Series DF Series
3-Sided & Glass Door Pricing
Door Width 14 Gage
UP TO 6’8” HIGH3'0" thru 4'0" $5,408 6'0" thru 8'0" $10,816
UP TO 7’0” HIGH3'0" thru 4'0" $5,625 6'0" thru 8'0" $11,250
UP TO 7’2” HIGH3'0" thru 4'0" $6,126 6'0" thru 8'0" $12,252
UP TO 8’0” HIGH3'0" thru 4'0" $6,624 6'0" thru 8'0" $13,248
*4-Sided & Shutter Pricing
Door Width 14 Gage
UP TO 6’8” HIGH2'8" thru 4'0" $5,408 5'4" thru 8'0" $10,816
UP TO 7’0” HIGH2'8" thru 4'0" $5,625 5'4" thru 8'0" $11,250
UP TO 7’2” HIGH2'8" thru 4'0" $6,126 5'4" thru 8'0" $12,252
UP TO 8’0” HIGH2'8" thru 4'0" $6,624 5'4" thru 8'0" $13,248
DF SeriesDF14 Complete Frame Pricing
Single Frame Jamb Depth
Width Height5 3/4”thru
5 7/8”
6”thru
7 7/8”
8”thru
9 7/8”
10”thru
10 3/4”
2’8”thru4’0”
6'8" $610 $660 $714 $767
7'0" $654 $700 $757 $805
7'2" $725 $770 $827 $875 8'0" $793 $838 $895 $944
Double Frame Jamb Depth
Width Height5 3/4”thru
5 7/8”
6”thru
7 7/8”
8”thru
9 7/8”
10”thru
10 3/4”
5’4”thru8’0”
6'8" $764 $817 $869 $919
7'0" $800 $849 $903 $951
7'2" $870 $915 $975 $1,021 8'0" $936 $985 $1,043 $1,089
Single Pair
Min. Max. Min. Max.
3’0” x 6’8” 4’0” x 8’0” 6’0” x 6’8” 8’0” x 8’0”
2’8” x 4’3” 4’0” x 8’0” 5’4” x 4’3” 8’0” x 8’0”
Labeled Door Single PairUL: N/A N/AITS/WHI: Metal Label (includes closer reinf.) *3, 1 1/2, 1, 3/4 hour or 20 min.
$ 68 $ 136
FM: N/A N/AICC500-2014/FEMA 361/320 Label N/C N/C
Labeled Frame Single PairUL: N/A N/AITS/WHI: Metal Label (includes closer reinf.) *3, 1 1/2, 1, 3/4 hour or 20 min.
$ 75 $ 75
FM: N/A N/AICC500-2014/FEMA 361/320 Label N/C N/C
Standard Construction Doors
Standard Construction Frames
Galvanized A-60 Steel IncludedGalvanized G-90 Steel N/AEdge Seam Construction (Welded and Seam fi lled) Included12 GA Top Channel as Top Cap IncludedMark Numbers N/CDutch Door N/A*Lock/Latch with Astragal per/pair $ 89Lock/Latch without Astragal per/pair $ 89Push Pull without Astragal N/A**Glass Light Assy: Vision (V) non-label (9 1/2”x9 1/2”) $ 4,336**Glass Light Assy: Vision (VF) label (9 1/2”x9 1/2”) $ 8,549**Glass Light Assy: Narrow (N) non-label (4 1/8”x 26 11/16”) $ 4,697**Glass Light Assy: Narrow (NF) label (4 1/8”x 26 11/16”) $ 8,910
Galvannealed A-60 Steel N/C4” Face Head $ 44Mark Numbers N/CDutch Frame N/ACommunicating Frame N/ASpecial Profi le Frames N/AHospital Stops N/AAnchors: Masonry-T N/CAnchors: Weld-in base N/C*Tube & Strap anchor, P&D, Factory Installation $ 27.50*Bolts for 2” face jambs and heads $ 8*Bolts for 4” face heads $ 124 Sided frame, add for sill section $ 8812 Gauge Head Reinforcing Channel Included
* Available as Flush doors only; no glass allowed
* Not recommended with panic exit hardware)** Factory installed and approved Glass and Trim, 3-Sided Only (no shutters)
* Glass lights rated up to 1 1/2 hours max.
* Glass lights rated up to 1 1/2 hours max.
* Existing Masonry (MUST specify wall type on order) EMA TSONC, EMA TSBLOCK
57Effective April 4, 2020
Locks/Latches Strikes
Frame Construction
Exit Devices
Kick Plates
Thresholds & Gasketsing
Thresholds & Gasketsing
Schlage MultiPoint, lever with CVR (concealed vertical rods)3-point: LM/LMV9300 (rose or escutcheon trim) $ 2,297 IVES SB360 Top and bottom surface bolts for inactive leaf
N/C
Special Vertical: hinge and lock N/CDouble Combo Locks N/ADeadlocks N/AStrikes N/ARoller Latch: Lock edge, top edge N/A
Von Duprin Vertical Rod reinf for 2-point: WS98/9927(F)
N/C
Von Duprin Rim and Vertical Rod reinf for 3-point: WS98/9957(F)
N/C
Schlage Vertical Rod reinf for 3-point: LM/LMV9300
N/C
IVES SB360 top and bottom surface bolts for inactive leaf
N/C
Additional strikes N/ARoller latch N/A
Stantard Face Weld (3PC) $ 88Full Profile Weld (3PC) $ 158
Von Duprin, panic bar exit with SVR (surface rods, reinf only)2-point: WS98/9927(F) N/C3-point: WS98/9957(F) N/C
Approved models- IVES 8400 (metal or plastic), 8402 (metal) (must be secured with steel screws, 48” max height bottom of door only).
Approved models- ZERO (must not impede or affect the function of the opening or latching hardware)
Approved models- ZERO (must not impede or affect the function of the opening or latching hardware)
Hinge Preparations Door Frame
Frame
Frame
Door
Door
Door
Frame
Door
Door
Door Frame
Frame
Closers/Holders/Stops
Electrical Preps
Electrical Preps
Hinge Preparations
Closers/Holders/Stops
5” Universal in lieu of 4 1/2” Universal N/CApproved models: IVES 3CB1, 3CBJHW, 3CB1NRO, 3CB1HWNRP, 3CB1SH, 3CB1HWSH, 5BB1, BB1HW, 5BB1NRP, 5BB1HWNRP, 5BB1SH, 5BB1HWSH, 5BB1WT, 5BB1HW WTAdditional hinge prep $ 18High frequency prep $ 46Continuous hinge (full-edge mounted only) N/CApproved models- IVES Alum Geared: 112HD, 112XY, 224HD, 224XYApproved models- IVES Steel Pin & Barrel: 600, 700, 700CS, 705Approved models- IVES Electric: TW8, TWP
20” reinforced IncludedHolder/Stop -full door width reinforced $ 60Approved models - LCN 4000T, 4010, 4010T, 4020, 4020T, 4030, 4030T, 4040XP, 4040XPT, 4050, 4110, 4110TConcealed or semi-concealed (per template) N/AALLE Concealed or semi-concealed (per template) N/ASurface Overhead Holder/Stop SpecifyApproved models- GJ 79S (extra heavy duty), 70S, 90S, 81S (confirm that your choice opens 180 deg if needed and as configured)Surface Floor & Wall Stops/Holders (thru bolted) No PrepApproved models- IVES (attached to exterior with steel screws per manufacturers instructions. Interior application must use IVES FS495 thru bolted to the door, at the bottom only) only, min 6” from lock or strike side of door.
Power transfer units (i.e. EPT2, EPT10, etc.) $ 103Approved models- Von Duprin EPT2, EPT1Electric hinge prep $ 18Auto Operators N/CApproved models- LCN 9952 for pairs, 9542 for singles (must be mounted to exterior/storm side of storm shelter or safe room). MUST order 5” heavy weight hinges and high frequency hinge reinforcements.Electric door closer N/CApproved models- LCN Sentronic 4040SE, 4310ME (must be mounted to exterior/storm side of storm shelter or safe room).Magnetic Hold open SpecifyApproved models- LCN SEM 7800 (extenders not permitted on inswing applications. Locate away from hardware/rod locations to avoid interference).Door position switch (round 1/2” to 1” dia) $ 18Approved models- Schlage 679-05. Sentrol 1078/1076 (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame). Magnetic switch (rectangular and mortised) $ 91Approved models- Schlage 7764, Sentrol 2757, Securitron MSS-1 high security (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame).Wiring raceway (with conduit) $ 143
Power transfer units (i.e. EPT2, EPT10, etc.) $ 103Approved models- Von Duprin EPT2, EPT1Electric hinge prep $ 39Auto Operators N/CApproved models- LCN 9953 for pairs, 9542 for singles (must be mounted to exterior/storm side of storm shelter or safe room). MUST order 5” heavy weight hinges and high frequency hinge reinforcements.Electric door closer N/CApproved models- LCN Sentronic 4040SE, 4310ME (must be mounted to exterior/storm side of storm shelter or safe room).Door position switch (round 1/2” to 1” dia) $ 37Approved models- Schlage 679-05. Sentrol 1078/1076 (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame). Magnetic switch (rectangular and mortised) $ 99Approved models- Schlage 7764, Sentrol 2757, Securitron MSS-1 high security (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame).
5” Universal in lieu of 4 1/2” Universal N/CApproved models: IVES 3CB1, 3CBJHW, 3CB1NRO, 3CB1HWNRP, 3CB1SH, 3CB1HWSH, 5BB1, BB1HW, 5BB1NRP, 5BB1HWNRP, 5BB1SH, 5BB1HWSH, 5BB1WT, 5BB1HW WTAdditional hinge prep $ 17High frequency prep $ 18Continuous hinge (full-edge mounted only) N/CApproved models- IVES Alum Geared: 112HD, 112XY, 224HD, 224XYApproved models- IVES Steel Pin & Barrel: 600, 700, 700CS, 705Approved models- IVES Electric: TW8, TWP
Surface Mounted Closers: 14” strap installed N/CApproved models- LCN 4000T, 4010, 4010T, 4020, 4020T, 4030, 4030T, 4040XP, 4040XPT, 4050, 4110, 4110T, FALCON SC70 (heavy duty), SC80A, SC60AConcealed or semi-concealed (per template) N/AALLE Concealed or semi-concealed (per template) N/ASurface Overhead Holder/Stop SpecifyApproved models- GJ 79S (extra heavy duty), 70S, 90S, 81S (79 series does not open 180 deg so application should be confirmed).
Door Notes:
1. Only approved models are allowed.
2. WS available as EO (exit only); NL (night latch) not available.
Frame Notes:
1. Only approved models are allowed.
2. Junction boxes provided with most electrical preps. Knockouts are designed to support 1/2’ or 3/4’ condiut.
3. Electrical preps will be reviewed by engineering.
58
Effective April 4, 2020
Locks/Latches Strikes
Frame Construction
Exit Devices
Kick Plates
Thresholds & Gasketsing
Thresholds & Gasketsing
Schlage MultiPoint, lever with CVR (concealed vertical rods)3-point: LM/LMV9300 (rose or escutcheon trim) $ 2,297 IVES SB360 Top and bottom surface bolts for inactive leaf
N/C
Special Vertical: hinge and lock N/CDouble Combo Locks N/ADeadlocks N/AStrikes N/ARoller Latch: Lock edge, top edge N/A
Von Duprin Vertical Rod reinf for 2-point: WS98/9927(F)
N/C
Von Duprin Rim and Vertical Rod reinf for 3-point: WS98/9957(F)
N/C
Schlage Vertical Rod reinf for 3-point: LM/LMV9300
N/C
IVES SB360 top and bottom surface bolts for inactive leaf
N/C
Additional strikes N/ARoller latch N/A
Stantard Face Weld (3PC) $ 88Full Profile Weld (3PC) $ 158
Von Duprin, panic bar exit with SVR (surface rods, reinf only)2-point: WS98/9927(F) N/C3-point: WS98/9957(F) N/C
Approved models- IVES 8400 (metal or plastic), 8402 (metal) (must be secured with steel screws, 48” max height bottom of door only).
Approved models- ZERO (must not impede or affect the function of the opening or latching hardware)
Approved models- ZERO (must not impede or affect the function of the opening or latching hardware)
Hinge Preparations Door Frame
Frame
Frame
Door
Door
Door
Frame
Door
Door
Door Frame
Frame
Closers/Holders/Stops
Electrical Preps
Electrical Preps
Hinge Preparations
Closers/Holders/Stops
5” Universal in lieu of 4 1/2” Universal N/CApproved models: IVES 3CB1, 3CBJHW, 3CB1NRO, 3CB1HWNRP, 3CB1SH, 3CB1HWSH, 5BB1, BB1HW, 5BB1NRP, 5BB1HWNRP, 5BB1SH, 5BB1HWSH, 5BB1WT, 5BB1HW WTAdditional hinge prep $ 18High frequency prep $ 46Continuous hinge (full-edge mounted only) N/CApproved models- IVES Alum Geared: 112HD, 112XY, 224HD, 224XYApproved models- IVES Steel Pin & Barrel: 600, 700, 700CS, 705Approved models- IVES Electric: TW8, TWP
20” reinforced IncludedHolder/Stop -full door width reinforced $ 60Approved models - LCN 4000T, 4010, 4010T, 4020, 4020T, 4030, 4030T, 4040XP, 4040XPT, 4050, 4110, 4110TConcealed or semi-concealed (per template) N/AALLE Concealed or semi-concealed (per template) N/ASurface Overhead Holder/Stop SpecifyApproved models- GJ 79S (extra heavy duty), 70S, 90S, 81S (confirm that your choice opens 180 deg if needed and as configured)Surface Floor & Wall Stops/Holders (thru bolted) No PrepApproved models- IVES (attached to exterior with steel screws per manufacturers instructions. Interior application must use IVES FS495 thru bolted to the door, at the bottom only) only, min 6” from lock or strike side of door.
Power transfer units (i.e. EPT2, EPT10, etc.) $ 103Approved models- Von Duprin EPT2, EPT1Electric hinge prep $ 18Auto Operators N/CApproved models- LCN 9952 for pairs, 9542 for singles (must be mounted to exterior/storm side of storm shelter or safe room). MUST order 5” heavy weight hinges and high frequency hinge reinforcements.Electric door closer N/CApproved models- LCN Sentronic 4040SE, 4310ME (must be mounted to exterior/storm side of storm shelter or safe room).Magnetic Hold open SpecifyApproved models- LCN SEM 7800 (extenders not permitted on inswing applications. Locate away from hardware/rod locations to avoid interference).Door position switch (round 1/2” to 1” dia) $ 18Approved models- Schlage 679-05. Sentrol 1078/1076 (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame). Magnetic switch (rectangular and mortised) $ 91Approved models- Schlage 7764, Sentrol 2757, Securitron MSS-1 high security (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame).Wiring raceway (with conduit) $ 143
Power transfer units (i.e. EPT2, EPT10, etc.) $ 103Approved models- Von Duprin EPT2, EPT1Electric hinge prep $ 39Auto Operators N/CApproved models- LCN 9953 for pairs, 9542 for singles (must be mounted to exterior/storm side of storm shelter or safe room). MUST order 5” heavy weight hinges and high frequency hinge reinforcements.Electric door closer N/CApproved models- LCN Sentronic 4040SE, 4310ME (must be mounted to exterior/storm side of storm shelter or safe room).Door position switch (round 1/2” to 1” dia) $ 37Approved models- Schlage 679-05. Sentrol 1078/1076 (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame). Magnetic switch (rectangular and mortised) $ 99Approved models- Schlage 7764, Sentrol 2757, Securitron MSS-1 high security (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame).
5” Universal in lieu of 4 1/2” Universal N/CApproved models: IVES 3CB1, 3CBJHW, 3CB1NRO, 3CB1HWNRP, 3CB1SH, 3CB1HWSH, 5BB1, BB1HW, 5BB1NRP, 5BB1HWNRP, 5BB1SH, 5BB1HWSH, 5BB1WT, 5BB1HW WTAdditional hinge prep $ 17High frequency prep $ 18Continuous hinge (full-edge mounted only) N/CApproved models- IVES Alum Geared: 112HD, 112XY, 224HD, 224XYApproved models- IVES Steel Pin & Barrel: 600, 700, 700CS, 705Approved models- IVES Electric: TW8, TWP
Surface Mounted Closers: 14” strap installed N/CApproved models- LCN 4000T, 4010, 4010T, 4020, 4020T, 4030, 4030T, 4040XP, 4040XPT, 4050, 4110, 4110T, FALCON SC70 (heavy duty), SC80A, SC60AConcealed or semi-concealed (per template) N/AALLE Concealed or semi-concealed (per template) N/ASurface Overhead Holder/Stop SpecifyApproved models- GJ 79S (extra heavy duty), 70S, 90S, 81S (79 series does not open 180 deg so application should be confirmed).
Door Notes:
1. Only approved models are allowed.
2. WS available as EO (exit only); NL (night latch) not available.
Frame Notes:
1. Only approved models are allowed.
2. Junction boxes provided with most electrical preps. Knockouts are designed to support 1/2’ or 3/4’ condiut.
3. Electrical preps will be reviewed by engineering.
Effective April 4, 2020
Locks/Latches Strikes
Frame Construction
Exit Devices
Kick Plates
Thresholds & Gasketsing
Thresholds & Gasketsing
Schlage MultiPoint, lever with CVR (concealed vertical rods)3-point: LM/LMV9300 (rose or escutcheon trim) $ 2,297 IVES SB360 Top and bottom surface bolts for inactive leaf
N/C
Special Vertical: hinge and lock N/CDouble Combo Locks N/ADeadlocks N/AStrikes N/ARoller Latch: Lock edge, top edge N/A
Von Duprin Vertical Rod reinf for 2-point: WS98/9927(F)
N/C
Von Duprin Rim and Vertical Rod reinf for 3-point: WS98/9957(F)
N/C
Schlage Vertical Rod reinf for 3-point: LM/LMV9300
N/C
IVES SB360 top and bottom surface bolts for inactive leaf
N/C
Additional strikes N/ARoller latch N/A
Stantard Face Weld (3PC) $ 88Full Profile Weld (3PC) $ 158
Von Duprin, panic bar exit with SVR (surface rods, reinf only)2-point: WS98/9927(F) N/C3-point: WS98/9957(F) N/C
Approved models- IVES 8400 (metal or plastic), 8402 (metal) (must be secured with steel screws, 48” max height bottom of door only).
Approved models- ZERO (must not impede or affect the function of the opening or latching hardware)
Approved models- ZERO (must not impede or affect the function of the opening or latching hardware)
Hinge Preparations Door Frame
Frame
Frame
Door
Door
Door
Frame
Door
Door
Door Frame
Frame
Closers/Holders/Stops
Electrical Preps
Electrical Preps
Hinge Preparations
Closers/Holders/Stops
5” Universal in lieu of 4 1/2” Universal N/CApproved models: IVES 3CB1, 3CBJHW, 3CB1NRO, 3CB1HWNRP, 3CB1SH, 3CB1HWSH, 5BB1, BB1HW, 5BB1NRP, 5BB1HWNRP, 5BB1SH, 5BB1HWSH, 5BB1WT, 5BB1HW WTAdditional hinge prep $ 18High frequency prep $ 46Continuous hinge (full-edge mounted only) N/CApproved models- IVES Alum Geared: 112HD, 112XY, 224HD, 224XYApproved models- IVES Steel Pin & Barrel: 600, 700, 700CS, 705Approved models- IVES Electric: TW8, TWP
20” reinforced IncludedHolder/Stop -full door width reinforced $ 60Approved models - LCN 4000T, 4010, 4010T, 4020, 4020T, 4030, 4030T, 4040XP, 4040XPT, 4050, 4110, 4110TConcealed or semi-concealed (per template) N/AALLE Concealed or semi-concealed (per template) N/ASurface Overhead Holder/Stop SpecifyApproved models- GJ 79S (extra heavy duty), 70S, 90S, 81S (confirm that your choice opens 180 deg if needed and as configured)Surface Floor & Wall Stops/Holders (thru bolted) No PrepApproved models- IVES (attached to exterior with steel screws per manufacturers instructions. Interior application must use IVES FS495 thru bolted to the door, at the bottom only) only, min 6” from lock or strike side of door.
Power transfer units (i.e. EPT2, EPT10, etc.) $ 103Approved models- Von Duprin EPT2, EPT1Electric hinge prep $ 18Auto Operators N/CApproved models- LCN 9952 for pairs, 9542 for singles (must be mounted to exterior/storm side of storm shelter or safe room). MUST order 5” heavy weight hinges and high frequency hinge reinforcements.Electric door closer N/CApproved models- LCN Sentronic 4040SE, 4310ME (must be mounted to exterior/storm side of storm shelter or safe room).Magnetic Hold open SpecifyApproved models- LCN SEM 7800 (extenders not permitted on inswing applications. Locate away from hardware/rod locations to avoid interference).Door position switch (round 1/2” to 1” dia) $ 18Approved models- Schlage 679-05. Sentrol 1078/1076 (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame). Magnetic switch (rectangular and mortised) $ 91Approved models- Schlage 7764, Sentrol 2757, Securitron MSS-1 high security (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame).Wiring raceway (with conduit) $ 143
Power transfer units (i.e. EPT2, EPT10, etc.) $ 103Approved models- Von Duprin EPT2, EPT1Electric hinge prep $ 39Auto Operators N/CApproved models- LCN 9953 for pairs, 9542 for singles (must be mounted to exterior/storm side of storm shelter or safe room). MUST order 5” heavy weight hinges and high frequency hinge reinforcements.Electric door closer N/CApproved models- LCN Sentronic 4040SE, 4310ME (must be mounted to exterior/storm side of storm shelter or safe room).Door position switch (round 1/2” to 1” dia) $ 37Approved models- Schlage 679-05. Sentrol 1078/1076 (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame). Magnetic switch (rectangular and mortised) $ 99Approved models- Schlage 7764, Sentrol 2757, Securitron MSS-1 high security (must be mortised into the edge or top of the door and into the door rabbet of the jamb or head of the frame).
5” Universal in lieu of 4 1/2” Universal N/CApproved models: IVES 3CB1, 3CBJHW, 3CB1NRO, 3CB1HWNRP, 3CB1SH, 3CB1HWSH, 5BB1, BB1HW, 5BB1NRP, 5BB1HWNRP, 5BB1SH, 5BB1HWSH, 5BB1WT, 5BB1HW WTAdditional hinge prep $ 17High frequency prep $ 18Continuous hinge (full-edge mounted only) N/CApproved models- IVES Alum Geared: 112HD, 112XY, 224HD, 224XYApproved models- IVES Steel Pin & Barrel: 600, 700, 700CS, 705Approved models- IVES Electric: TW8, TWP
Surface Mounted Closers: 14” strap installed N/CApproved models- LCN 4000T, 4010, 4010T, 4020, 4020T, 4030, 4030T, 4040XP, 4040XPT, 4050, 4110, 4110T, FALCON SC70 (heavy duty), SC80A, SC60AConcealed or semi-concealed (per template) N/AALLE Concealed or semi-concealed (per template) N/ASurface Overhead Holder/Stop SpecifyApproved models- GJ 79S (extra heavy duty), 70S, 90S, 81S (79 series does not open 180 deg so application should be confirmed).
Door Notes:
1. Only approved models are allowed.
2. WS available as EO (exit only); NL (night latch) not available.
Frame Notes:
1. Only approved models are allowed.
2. Junction boxes provided with most electrical preps. Knockouts are designed to support 1/2’ or 3/4’ condiut.
3. Electrical preps will be reviewed by engineering.
59
Front outside
Back outside
refer to technical data sheet No. 102j & 102k
SOUND TRANSMISSION CONTROL (STC) 40, 42, 43 and 47 DOORS
Thickness – 1 3/4” (+/- 1/16”)Actual Door Size – Door undersized from nominal by 1/4” in width and 1/2” in height. Standard undercut is 3/8”. Undercut contingent on threshold.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded to each skin at a maximum of 5” on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16” reinforcement (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel. 16 gage reinforcements for mortised or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – Special Sound Core
Face skin – 16 gage – Cold Roll Steel , A60 Galvannealed or G90 Galvanized
Closer Reinforcement (Required) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 4’0” x 8’0”
SDI 100 Grade / Model – Grade 3 / Model 1 – 2 (Physical Performance Level A)
(continued on back)
Edge Seam Construction – Visible edge seam standard. Optional - Intermittently welded or Continuously welded edge seam.
Universal Standard / Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep – 4 1/2” hinges standard.
Handing Design – Non-Handed standard / Optional Handed design
STC 40 – 6 PANEL EMBOSSEDSOUND TRANSMISSION CONTROL (STC) 40 DOORS
Thickness – 1 3/4” (+/- 1/16”)
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded to each skin at a maximum of 5” on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16” reinforcement (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel. 16 gage reinforcements for mortised or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – 250 DEG Temperature Rise core
Face skin – 16 gage x A40 Galvannealed
Closer Reinforcement (Optional) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 3’6” x 8’0”SDI 100 Grade / Model – Grade 3 / Model 1 – 2 (Physical Performance Level A)
Edge Seam Construction – Visible edge seam, standard. Optional Intermittently or Continuous welded edge seam
Universal Standard / Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep – 4 1/2” hinges standard.
Handing Design – Non-Handed standard / Optional Handed design
STC Eco
SECTION 08348 ACOUSTIC STEEL DOOR & FRAME ASSEMBLYSOUND DOOR SPECIFICATIONS
PART 1 - GENERAL A. Sound Rating: Certify that the construction is identical to the Sound Transmission
Classifi cation (STC) assembly tested at an independent acoustical laboratory qualifi ed under NVLAP by the National Institute for Science and Technology (NIST) according to ASTME90 and that the STC rating according to ASTM E413 is not less than that specifi ed or scheduled. Minimum STC rating shall be one of the following: 40, 42, 43, 47.
1.6 Warranty A. Material and workmanship shall be warranted by manufacturer for a period of one (1) year
from the date of shipment. Warranty shall apply to replacement or retrofi t of product only.1.7 Approved Manufacturers A. Republic Doors and Frames 155 Republic Drive McKenzie TN 38201 Phone: 800-733-3667 Fax: 800-723-6677PART 2 - PRODUCTS2.1 Materials A. All steels used to manufacture doors, frames, anchors and accessories shall be in
accordance with SDI-100/ANSI A250.8. B. Door Core - shall be manufacturer’s proprietary standard core to achieve specifi ed ratings. C. Shop primer shall be manufacturer’s standard rust inhibitive baked on or air dried shop
primer. D. Door seals shall be manufacturer’s standard adjustable sound seals. E. Hardware shall be manufacturer’s standard seals, gasketing and threshold (when required).2.2 Fabrication A. Doors shall be minimum 16 gage (STC 40, 42, 43 and 47), 1 3/4” thick, without visible joints
on exposed faces. Reinforce top and bottom with “fl ush” steel channels of not less then 16 gage.
B. Door core shall be proprietary acoustic composite core as tested by manufacturer to meet specifi ed STC rating.
C. Frames shall be minimum 16 gage, face welded and ground smooth construction or KD frames on STC 40 or 42 only. Provide frames with minimum of three anchors per jamb suitable for adjoining wall construction. Provide anchors of not less then 0.042” in thickness or 0.167” diameter wire.
D. All frames shall be fully prepared for mortised hardware and reinforced only for surface mounted hardware. Drilling and/or tapping shall be completed by others.
E. Acoustical Seals shall be manufactured by ZERO International or Pemko.
INSTALLATION INSTRUCTIONSFor Acoustic GasketsRepublic’s tested STC system included: R-564 threshold, R-485 head and jamb seals, R-119 spring bronze head and jamb seals. 1. The R-119 spring bronze should be installed on the bottom of the door before hanging. 2. Install the R-564 threshold to suit fl oor condition. Caulk round the bottom of threshold along with the
entire perimeter of frame and at meeting edges of threshold and frame. 3. Close the door and measure the frame opening width and height. Install the R-485 head piece fi rst
(trim as necessary). Place the piece against the face of the door, making gentle contact between the “rubber extrusion” seal and the door, then fasten in place. Place the hinge side seal against the face of the door, making gentle contact between the “rubber extrusion” seal and the door, then fasten in place. Place the strike side seal against the face of the door, making gentle contact between the rubber extrusion seal and the door, then fasten in place.
4. Install the R-119, head piece fi rst, then the hinge side and fi nally the lock side using the pressure sensitive tape to fasten the spring bronze to the frame.
5. Check operation of the door after each piece of material is installed to make sure that no binding is taking place.
SOUND TRANSMISSION CONTROL (STC) 40, 42, 43 and 47 DOORS DL Series Sound Transmission Control (STC) Doors shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee 38201
R-485FRAME SEAL
R-485FRAME SEAL
R-485FRAME SEAL
(Hinges not Included)
STC DOOR
R-564 1/2 “ THRESHOLD
(not ADA compliant)
1/2”
ACOUSTICAL FILLER BY INSTALLER
R-119 SPRING BRONZE SEALS
16 GA. REPUBLIC ME SERIES STANDARD
FRAME
1 3/4” REPUBLIC SOUND DOOR
REPUBLIC PROPRIETARY SOUND CORE
R-119 SPRING BRONZE SEALS
UNDERCUT CONTINGENT ON THRESHOLD.
2”5/
8”
5 3/4” MIN.
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
60
Front outside
Back outside
refer to technical data sheet No. 102j & 102k
SOUND TRANSMISSION CONTROL (STC) 40, 42, 43 and 47 DOORS
Thickness – 1 3/4” (+/- 1/16”)Actual Door Size – Door undersized from nominal by 1/4” in width and 1/2” in height. Standard undercut is 3/8”. Undercut contingent on threshold.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded to each skin at a maximum of 5” on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16” reinforcement (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel. 16 gage reinforcements for mortised or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – Special Sound Core
Face skin – 16 gage – Cold Roll Steel , A60 Galvannealed or G90 Galvanized
Closer Reinforcement (Required) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 4’0” x 8’0”
SDI 100 Grade / Model – Grade 3 / Model 1 – 2 (Physical Performance Level A)
(continued on back)
Edge Seam Construction – Visible edge seam standard. Optional - Intermittently welded or Continuously welded edge seam.
Universal Standard / Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep – 4 1/2” hinges standard.
Handing Design – Non-Handed standard / Optional Handed design
STC 40 – 6 PANEL EMBOSSEDSOUND TRANSMISSION CONTROL (STC) 40 DOORS
Thickness – 1 3/4” (+/- 1/16”)
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded to each skin at a maximum of 5” on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16” reinforcement (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel. 16 gage reinforcements for mortised or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – 250 DEG Temperature Rise core
Face skin – 16 gage x A40 Galvannealed
Closer Reinforcement (Optional) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 3’6” x 8’0”SDI 100 Grade / Model – Grade 3 / Model 1 – 2 (Physical Performance Level A)
Edge Seam Construction – Visible edge seam, standard. Optional Intermittently or Continuous welded edge seam
Universal Standard / Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep – 4 1/2” hinges standard.
Handing Design – Non-Handed standard / Optional Handed design
STC Eco
SECTION 08348 ACOUSTIC STEEL DOOR & FRAME ASSEMBLYSOUND DOOR SPECIFICATIONS
PART 1 - GENERAL A. Sound Rating: Certify that the construction is identical to the Sound Transmission
Classifi cation (STC) assembly tested at an independent acoustical laboratory qualifi ed under NVLAP by the National Institute for Science and Technology (NIST) according to ASTME90 and that the STC rating according to ASTM E413 is not less than that specifi ed or scheduled. Minimum STC rating shall be one of the following: 40, 42, 43, 47.
1.6 Warranty A. Material and workmanship shall be warranted by manufacturer for a period of one (1) year
from the date of shipment. Warranty shall apply to replacement or retrofi t of product only.1.7 Approved Manufacturers A. Republic Doors and Frames 155 Republic Drive McKenzie TN 38201 Phone: 800-733-3667 Fax: 800-723-6677PART 2 - PRODUCTS2.1 Materials A. All steels used to manufacture doors, frames, anchors and accessories shall be in
accordance with SDI-100/ANSI A250.8. B. Door Core - shall be manufacturer’s proprietary standard core to achieve specifi ed ratings. C. Shop primer shall be manufacturer’s standard rust inhibitive baked on or air dried shop
primer. D. Door seals shall be manufacturer’s standard adjustable sound seals. E. Hardware shall be manufacturer’s standard seals, gasketing and threshold (when required).2.2 Fabrication A. Doors shall be minimum 16 gage (STC 40, 42, 43 and 47), 1 3/4” thick, without visible joints
on exposed faces. Reinforce top and bottom with “fl ush” steel channels of not less then 16 gage.
B. Door core shall be proprietary acoustic composite core as tested by manufacturer to meet specifi ed STC rating.
C. Frames shall be minimum 16 gage, face welded and ground smooth construction or KD frames on STC 40 or 42 only. Provide frames with minimum of three anchors per jamb suitable for adjoining wall construction. Provide anchors of not less then 0.042” in thickness or 0.167” diameter wire.
D. All frames shall be fully prepared for mortised hardware and reinforced only for surface mounted hardware. Drilling and/or tapping shall be completed by others.
E. Acoustical Seals shall be manufactured by ZERO International or Pemko.
INSTALLATION INSTRUCTIONSFor Acoustic GasketsRepublic’s tested STC system included: R-564 threshold, R-485 head and jamb seals, R-119 spring bronze head and jamb seals. 1. The R-119 spring bronze should be installed on the bottom of the door before hanging. 2. Install the R-564 threshold to suit fl oor condition. Caulk round the bottom of threshold along with the
entire perimeter of frame and at meeting edges of threshold and frame. 3. Close the door and measure the frame opening width and height. Install the R-485 head piece fi rst
(trim as necessary). Place the piece against the face of the door, making gentle contact between the “rubber extrusion” seal and the door, then fasten in place. Place the hinge side seal against the face of the door, making gentle contact between the “rubber extrusion” seal and the door, then fasten in place. Place the strike side seal against the face of the door, making gentle contact between the rubber extrusion seal and the door, then fasten in place.
4. Install the R-119, head piece fi rst, then the hinge side and fi nally the lock side using the pressure sensitive tape to fasten the spring bronze to the frame.
5. Check operation of the door after each piece of material is installed to make sure that no binding is taking place.
SOUND TRANSMISSION CONTROL (STC) 40, 42, 43 and 47 DOORS DL Series Sound Transmission Control (STC) Doors shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee 38201
R-485FRAME SEAL
R-485FRAME SEAL
R-485FRAME SEAL
(Hinges not Included)
STC DOOR
R-564 1/2 “ THRESHOLD
(not ADA compliant)
1/2”
ACOUSTICAL FILLER BY INSTALLER
R-119 SPRING BRONZE SEALS
16 GA. REPUBLIC ME SERIES STANDARD
FRAME
1 3/4” REPUBLIC SOUND DOOR
REPUBLIC PROPRIETARY SOUND CORE
R-119 SPRING BRONZE SEALS
UNDERCUT CONTINGENT ON THRESHOLD.
2”5/
8”
5 3/4” MIN.
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
61
Flush
STC Width Height Door
42Thru 3'0"
7'0"
$1,790 Over 3'0" thru 4'0" $2,077
43 or 47
Thru 3'0" $2,448 Over 3'0" thru 4'0" $2,714
42Thru 3'0"
8'0"
$2,067 Over 3'0" thru 4'0" $2,290
43 or 47
Thru 3'0" $2,702 Over 3'0" thru 4'0" $2,927
Note: STC Frames are priced 1/2” Dbl Return, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced 16 gage, CRS, Steel Stiffened core and 3/8” undercut. STC 42 units
available with knock down frame, deduct $58.00 per frame from above price.
See Engineering Section for further options and / or details
STC ECO 42 - 43 - 47 & 6 PANEL EMB STC 40
• Doors are available from STC 33 to STC 47• Standard hollow metal frames (min. 5 3/4” frame depth) - welded.
KD available on 40 and 42• SDI Level 3 - Maximum Duty - Performance Level A• Fire Labeling varies by rating• Sound resistant septum (proprietary construction)• All doors tested in fully operable conditions
SINGLES
Flush
STC Width Height Door
42Thru 3'0"
7'0"
$1,790 Over 3'0" thru 4'0" $2,077
43 or 47
Thru 3'0" $2,448 Over 3'0" thru 4'0" $2,714
42Thru 3'0"
8'0"
$2,067
Over 3'0" thru 4'0" $2,290
43 or 47
Thru 3'0" $2,702 Over 3'0" thru 4'0" $2,927
Note: STC Frames are priced 7/16” Sgl Return, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced 16 gage, CRS, Steel Stiffened core and 3/8” undercut. STC 42
units available with knock down frame, deduct $58.00 per frame from above price.
Univ x 7/16” Sgl Return x 16 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$330 $404 $485 $591 $341 $409 $492 $597 $330 $404 $485 $591 $341 $409 $492 $597 $385 $449 $529 $635 $396 $453 $534 $640 $385 $404 $529 $635 $396 $453 $534 $640
Univ x 7/16” Sgl Return x 14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$385 $480 $571 $677 $397 $492 $577 $683 $385 $480 $571 $677 $397 $492 $577 $683 $446 $532 $622 $729 $459 $543 $628 $734 $446 $532 $622 $729 $459 $543 $628 $734
SINGLES
DW x 1/2” Dbl Return x 16 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$340 $438 $527 $643 $351 $444 $532 $650 $340 $438 $527 $643 $351 $444 $532 $650 $402 $486 $575 $691 $414 $492 $580 $699 $402 $486 $575 $691 $414 $492 $580 $699
DW x 1/2" Dbl Return x 14 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$417 $522 $622 $738 $430 $533 $628 $745 $417 $522 $622 $738 $430 $533 $628 $745 $484 $578 $677 $795 $497 $590 $683 $800 $484 $578 $677 $795 $497 $590 $683 $800
NOTE: STC 42 - 47 Hardware Package (Included in price)
Single (Embossed 6 Panel)
STC Width Height Door
40Thru 3'0"
7'0" $2,470
Over 3'0" thru 3'6" $2,568
40Thru 3'0"
8’0” $2,659
Over 3'0" thru 3'6" $2,776
STC 40 EMBOSSED 6 PANEL NOTES
Temperature Rise core included in price
Does not require or include hardware package
Standard 3/4" undercut
Testing & Certification:All door systems tested in accordance with:
ASTM E 90-04ASTM E 413-04
ASTM E 1332-90ASTM E 2235-04
Testing was performed by:Architectural Testing Inc. &
Riverbank Acoustical Laboratories
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $ 85 $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 354 $ 80
Door Frame
Hinge Preparations Door FrameSpecial Hinge Locations No Charge No Charge4 1/2" Heavy Weight Hinge Prep No Charge No ChargeAdditional Hinge Prep (per hinge) $ 19 $ 17 5” Standard or Heavy Weight (per hinge) No Charge No Charge Electric Hinge (cutout in one one hinge reinf. (no junction box or conduit)
$ 18 $ 20
Power Transfer (no junction box or conduit) $ 103 $ 101 8" Junction Box Welded in N/A $ 58
14" Junction Box Welded in Soffit N/A $ 61
10" Junction Box Welded in Soffit N/A $ 59
Closer Preparations Door FrameCloser Reinforcement $ 30 $ 21Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Special Finish Door FrameSecond Coat of Primer $ 97 $ 85 Finish Paint Setup Charge $ 1,214 $ 1,214 Finish Paint (min. qty. 20 units) (price includes full carton wrap)
$ 195 $ 195
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple only (per prep) N/A $ 4
Door FrameDoor - Lock / Frame - Strike PreparationsStandard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4" Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2" Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 Rim Reinforcement only *See Note $ 40 $ 20 Rim or Mortise ED Reinforcement with Function Prep
$ 67 N/A
Surface Vertical Rod Reinforcement only *See Note $ 65 $ 26 Concealed Vertical Rod (Strike) (per prep) $ 481 N/A Exit Alarm Reinforcement only *See Note $ 50 $ 19
Special Constructions Door Frame
10 Gage Hinge and 14 Gage Lock Channels $ 122 N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge $ 191 N/A Bondo Filled Edge $ 90 N/A Beveled Lock Edge (1/8" in 2") $ 23 N/A Door Viewer $ 23 N/A Conduit / Raceway - no wiring $ 143 N/A
Frame Construction Door FrameUnit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A IncludedFull Profile Weld (3PC) N/A $ 141
Frame Profile Options Door Frame
Single Rabbet (minimum depth on STC is 5 3/4") N/A $ 43 4" Face Heads (Sgl or Dbl) N/A $ 48
Door Test Performance Characteristics Per ASTM E90 & E413
Transmission Loss in db/HertzSTC 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 500038 26 23 27 33 36 35 34 34 39 41 42 44 45 47 45 45 45 4542 32 28 32 36 35 37 36 38 38 40 42 43 44 45 49 54 56 54
Effective April 4, 2020
Label Preparations Door FrameMark Numbers No Charge No Charge U.L. Metal Fire Label STC 40 & 42 only $ 32 $ 28 Warnock Hersey Metal Fire Label STC 40&42 only $ 32 $ 28
*NOTE: Republic Certified Acoustical Systems- tested with standard hardware applications. Surface applied hardware not recommended due to possible interference with seals and gaskets. Any break or tear in seals and gaskets my affect performance.
62
Flush
STC Width Height Door
42Thru 3'0"
7'0"
$1,790 Over 3'0" thru 4'0" $2,077
43 or 47
Thru 3'0" $2,448 Over 3'0" thru 4'0" $2,714
42Thru 3'0"
8'0"
$2,067 Over 3'0" thru 4'0" $2,290
43 or 47
Thru 3'0" $2,702 Over 3'0" thru 4'0" $2,927
Note: STC Frames are priced 1/2” Dbl Return, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced 16 gage, CRS, Steel Stiffened core and 3/8” undercut. STC 42 units
available with knock down frame, deduct $58.00 per frame from above price.
See Engineering Section for further options and / or details
STC ECO 42 - 43 - 47 & 6 PANEL EMB STC 40
• Doors are available from STC 33 to STC 47• Standard hollow metal frames (min. 5 3/4” frame depth) - welded.
KD available on 40 and 42• SDI Level 3 - Maximum Duty - Performance Level A• Fire Labeling varies by rating• Sound resistant septum (proprietary construction)• All doors tested in fully operable conditions
SINGLES
Flush
STC Width Height Door
42Thru 3'0"
7'0"
$1,790 Over 3'0" thru 4'0" $2,077
43 or 47
Thru 3'0" $2,448 Over 3'0" thru 4'0" $2,714
42Thru 3'0"
8'0"
$2,067
Over 3'0" thru 4'0" $2,290
43 or 47
Thru 3'0" $2,702 Over 3'0" thru 4'0" $2,927
Note: STC Frames are priced 7/16” Sgl Return, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced 16 gage, CRS, Steel Stiffened core and 3/8” undercut. STC 42
units available with knock down frame, deduct $58.00 per frame from above price.
Univ x 7/16” Sgl Return x 16 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$330 $404 $485 $591 $341 $409 $492 $597 $330 $404 $485 $591 $341 $409 $492 $597 $385 $449 $529 $635 $396 $453 $534 $640 $385 $404 $529 $635 $396 $453 $534 $640
Univ x 7/16” Sgl Return x 14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$385 $480 $571 $677 $397 $492 $577 $683 $385 $480 $571 $677 $397 $492 $577 $683 $446 $532 $622 $729 $459 $543 $628 $734 $446 $532 $622 $729 $459 $543 $628 $734
SINGLES
DW x 1/2” Dbl Return x 16 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$340 $438 $527 $643 $351 $444 $532 $650 $340 $438 $527 $643 $351 $444 $532 $650 $402 $486 $575 $691 $414 $492 $580 $699 $402 $486 $575 $691 $414 $492 $580 $699
DW x 1/2" Dbl Return x 14 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$417 $522 $622 $738 $430 $533 $628 $745 $417 $522 $622 $738 $430 $533 $628 $745 $484 $578 $677 $795 $497 $590 $683 $800 $484 $578 $677 $795 $497 $590 $683 $800
NOTE: STC 42 - 47 Hardware Package (Included in price)
Single (Embossed 6 Panel)
STC Width Height Door
40Thru 3'0"
7'0" $2,470
Over 3'0" thru 3'6" $2,568
40Thru 3'0"
8’0” $2,659
Over 3'0" thru 3'6" $2,776
STC 40 EMBOSSED 6 PANEL NOTES
Temperature Rise core included in price
Does not require or include hardware package
Standard 3/4" undercut
Testing & Certification:All door systems tested in accordance with:
ASTM E 90-04ASTM E 413-04
ASTM E 1332-90ASTM E 2235-04
Testing was performed by:Architectural Testing Inc. &
Riverbank Acoustical Laboratories
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $ 85 $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 354 $ 80
Door Frame
Hinge Preparations Door FrameSpecial Hinge Locations No Charge No Charge4 1/2" Heavy Weight Hinge Prep No Charge No ChargeAdditional Hinge Prep (per hinge) $ 19 $ 17 5” Standard or Heavy Weight (per hinge) No Charge No Charge Electric Hinge (cutout in one one hinge reinf. (no junction box or conduit)
$ 18 $ 20
Power Transfer (no junction box or conduit) $ 103 $ 101 8" Junction Box Welded in N/A $ 58
14" Junction Box Welded in Soffit N/A $ 61
10" Junction Box Welded in Soffit N/A $ 59
Closer Preparations Door FrameCloser Reinforcement $ 30 $ 21Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Special Finish Door FrameSecond Coat of Primer $ 97 $ 85 Finish Paint Setup Charge $ 1,214 $ 1,214 Finish Paint (min. qty. 20 units) (price includes full carton wrap)
$ 195 $ 195
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple only (per prep) N/A $ 4
Door FrameDoor - Lock / Frame - Strike PreparationsStandard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4" Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2" Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 Rim Reinforcement only *See Note $ 40 $ 20 Rim or Mortise ED Reinforcement with Function Prep
$ 67 N/A
Surface Vertical Rod Reinforcement only *See Note $ 65 $ 26 Concealed Vertical Rod (Strike) (per prep) $ 481 N/A Exit Alarm Reinforcement only *See Note $ 50 $ 19
Special Constructions Door Frame
10 Gage Hinge and 14 Gage Lock Channels $ 122 N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge $ 191 N/A Bondo Filled Edge $ 90 N/A Beveled Lock Edge (1/8" in 2") $ 23 N/A Door Viewer $ 23 N/A Conduit / Raceway - no wiring $ 143 N/A
Frame Construction Door FrameUnit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A IncludedFull Profile Weld (3PC) N/A $ 141
Frame Profile Options Door Frame
Single Rabbet (minimum depth on STC is 5 3/4") N/A $ 43 4" Face Heads (Sgl or Dbl) N/A $ 48
Door Test Performance Characteristics Per ASTM E90 & E413
Transmission Loss in db/HertzSTC 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 500038 26 23 27 33 36 35 34 34 39 41 42 44 45 47 45 45 45 4542 32 28 32 36 35 37 36 38 38 40 42 43 44 45 49 54 56 54
Effective April 4, 2020
Label Preparations Door FrameMark Numbers No Charge No Charge U.L. Metal Fire Label STC 40 & 42 only $ 32 $ 28 Warnock Hersey Metal Fire Label STC 40&42 only $ 32 $ 28
*NOTE: Republic Certified Acoustical Systems- tested with standard hardware applications. Surface applied hardware not recommended due to possible interference with seals and gaskets. Any break or tear in seals and gaskets my affect performance.
63
Front outside
Back outside
refer to technical data sheet No. 102h & 102i
SOUND TRANSMISSION CONTROL (STC)
STC 48
Thickness – 1 3/4” (+/- 1/16”)
Actual Door Size – Door undersized from nominal by ¼” in width and 3/8” in height. Standard undercut is 1/4”. Undercut is contingent on threshold.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded to each skin at a maximum of 5” on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16” reinforcement (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel. 16 gage reinforcements for mortised or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – Special Sound Core
Face skin – 16 gage – Cold Roll Steel , A60 Galvanneal or G90 Galvanized
Closer Reinforcement (Required) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 4’0” x 8’0”
SDI 100 Grade / Model – Grade 3 / Model 2 (Physical Performance Level A)
(continued on back)
Edge Seam Construction – Intermittently welded edge seam (Optional - Continuous welded edge seam).
Universal Standard / Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep – 5” hinges standard.
Handing Design – Non-Handed standard / Optional Handed design
STC 50 & 52 –
Thickness – 1 13/16” (+/- 1/16”)
Actual Door Size – Door undersized from nominal by 1/4” in width and 3/8” in height. Standard undercut is 1/4”. Undercut is contingent on threshold.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 10 gage steel channel projection welded to each skin at a maximum of 5” on center.
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 14 gage steel channel projection welded at a maximum of 5” on center.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – Special Sound Core
Face skin – 14 gage – Cold Roll Steel , A60 Galvanneal or G90 Galvanized
Closer Reinforcement (Required) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 4’0” x 8’0”
SDI 100 Grade / Model – Grade 4 / Model 2 (Physical Performance Level A)
Edge Seam Construction – Intermittently welded edge seam standard. (Optional - continuous welded edge seam)
NOTE: STC Pairs available – Maximum rating 47
STC 48 - 50 - 52 and STC 47 Pairs
SECTION 08348 ACOUSTIC STEEL DOOR & FRAME ASSEMBLYSound Door Specifi cations
PART 1 - GENERAL1.4 Quality Assurance A. Sound Rating: Certify that the construction is identical to the Sound Transmission
Classifi cation (STC) assembly tested at an independent acoustical laboratory qualifi ed under NVLAP by the National Institute for Science and Technology (NIST) according to ASTME90 and that the STC rating according to ASTM E413 is not less than that specifi ed or scheduled. Minimum STC rating shall be one of the following: 48, 50, 52.
1.6 Warranty A. Material and workmanship shall be warranted by manufacturer for a period of one (1) year
from the date of shipment. Warranty shall apply to replacement or retrofi t of product only.1.7 Approved Manufacturers A. Republic Doors and Frames 155 Republic Drive McKenzie TN 38201 Phone: 800-733-3667 Fax: 800-723-6677PART 2 - PRODUCTS2.1 Materials A. All steels used to manufacture doors, frames, anchors and accessories shall be in
accordance with SDI-100/ANSI A250.8. B. Door Core - shall be manufacturer’s proprietary standard core to achieve specifi ed ratings. C. Shop primer shall be manufacturer’s standard rust inhibitive baked on or air dried shop
primer. D. Door seals shall be manufacturer’s standard adjustable sound seals. E. Hardware shall be manufacturer’s standard Cam-Lift hinges, door bottom, threshold, seals
and gaskets (when required).2.2 Fabrication A. Doors shall be minimum 14 gage (STC 50 & 52 = 1 13/16”), 16 gage (STC 48 = 1 3/4”),
(nominal), without visible joints on exposed faces. Reinforce top and bottom with “fl ush” steel channels of not less then 16 gage.
B. Door core shall be proprietary acoustic composite core as tested by manufacturer to meet specifi ed STC rating.
C. Frames shall be minimum 16 gage for STC 48, 14 gage for STC 50 & 52, face welded and ground smooth construction . Provide frames with minimum of three anchors per jamb suitable for adjoining wall construction. Provide anchors of not less then 0.042” in thickness or 0.167” diameter wire.
D. All frames shall be fully prepared for mortised hardware and reinforced only for surface mounted hardware. Drilling and/or tapping shall be completed by others.
E. Acoustical Seals shall be manufactured by ZERO International or Pemko.PART 3 - EXECUTION3.1 InstallationFor Acoustic GasketsRepublic’s tested STC system included:R-566 threshold, R-870 adjustable head and jamb seals, R-119 spring bronze head and jamb seals. 1. The R-119 spring bronze should be installed on the bottom of the door before hanging. 2. Install the R-566 threshold to suit fl oor condition. Caulk round the bottom of threshold along
with the entire perimeter of frame and at meeting edges of threshold and frame. 3. Close the door and measure the frame opening width and height. Install the R-870 head
piece fi rst (trim as necessary). Place the piece against the face of the door, making gentle contact between the “rubber extrusion” seal and the door, then fasten in place. Place the hinge side seal against the face of the door, making gentle contact between the “rubber
R-870FRAME SEAL
R-870FRAME SEAL
R-870FRAME SEAL
(5” Cam Lift Hinges Included)
STC DOORR-566
SURFACE MOUNTED AUTOMATIC DOOR
BOTTOM
R-566 1/2 “ THRESHOLD (ADA compliant)
1/2”
ACOUSTICAL FILLER BY INSTALLER
REPUBLIC ME SERIES STANDARD
FRAME
REPUBLIC SOUND DOOR
REPUBLIC PROPRIETARY SOUND CORE
R-119 SPRING BRONZE SEALS
UNDERCUT CONTINGENT ON THRESHOLD
2”5/
8”
5 3/4” MIN.
• Doors are available from STC 48 to STC 52 • Standard hollow metal frames (min. 5 3/4”
frame depth - welded • Flush top and bottom channel • SDI Level 3 & 4 - Maximum Duty - Performance
Level A • Sound resistant septum (proprietary
construction) • STC 48 and above furnished complete with
all perimeter seals, 5” Cam-lift hinges and threshold and door bottom
• Pairs available up to STC 47 • All doors tested in fully operable conditions
Testing & Certifi cation:
extrusion” seal and the door, then fasten in place. Place the strike side seal against the face of the door, making gentle contact between the rubber extrusion seal and the door, then fasten in place.
4. Install the R-119, head piece fi rst, then the hinge side and fi nally the lock side using the pressure sensitive tape to fasten the spring bronze to the frame.
5. Adjust the R-870 with the adjustment screws for the desired seal and operation of the door. 6. Check operation of the door after each piece of material is installed to make sure that no binding is
taking place.
All door systems tested in accordance with:ASTM E 90-04ASTM E 413-04ASTM E 1332-90ASTM E 2235-04
Testing was performed by:Architectural Testing Inc. &
Riverbank Acoustical Laboratories
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
Front outside
Back outside
DL/DE SeriesHoneycombrefer to technical data sheet No. 105
Door Thickness – 1 3/4” (14 gage = 1 13/16”) Actual Door Size – Door undersized from nominal by 1/4” in width and 7/8” in height. Standard undercut is ¾”
Core – 3/4” Cell Honeycomb Core. STC rating of 38
Hinge Rail and Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (Optional 10 gage - DE Series) projection welded at a maximum of 5” on center. Additional reinforcement plates are provided (DL Series) at the hinge locations to give a total of 3/16” reinforcement. (Backset 1/4”)
Lock Rail – Lock edge is square and reinforced with a continuous 16 gage steel channel projection welded at a maximum of 5” on center. (Optional - Beveled 1/8” in 2” ) 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is a fl ush 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
Bottom channel – Bottom channel is an inverted 16 gage steel channel, projection welded at a maximum of 2 1/2” on center.
(continued on back)
Face Skins – 20 gage, 18 gage, 16 gage, or 14 gage (DE Series) (cold rolled steel or A60 galvannealed) * G90 Galvanized available in 16 or 14
gage only
Closer reinforcement – 14 gage 18” x 6” (Optional 12 gage)
Size Availability – (Singles) Max. 4’0” x 10’0” (Pairs) Max. 8’0” x 10’0”
SDI 100 - Grade/Model – Levels 1-4 & Models 1 & 2 (Maximum Duty Performance level A)
Label Range – 20 minute through 3 hour / Underwriters Laboratory or Warnock Hersey
Edge Seam Construction – Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)
Universal Standard/Heavy Weight Hinge – Hinge fi llers are used allowing for easy modifi cation from heavy to standard weight hinge prep.
Handing Design – Non-handed standard (Optional handed)
Cylindrical Lock Prep
Door Hinge Prep
Honeycomb Core
Inverted Bottom Channel
Flush Top
Mortise Lock Prep
Universal Lock Prep “DT”
F V N G LI DFG
Paired doorswithout astragal
Paired doorswith fl at bar astragal
Paired doorswith “Z” astragal
Grade Model Construction RBP Series
I Physical Performance Level C
(1 3/4” (44) and 1 3/8” (35)Standard Duty
Minimum Gage = 20
1
2
Full Flush
Seamless - (Unavailable)
DL 420, DE 420
DL 420, DE 420
II Physical Performance Level B
(1 3/4” (44) Only)Heavy Duty
Minimum Gage = 18
1
2
Full Flush
Seamless
DL 418, DE 418
DL 418, DE 418
III Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 16
1
2
Full Flush
Seamless
DL 416, DE 416
DL 416, DE 416
IV Physical Performance Level A
(1 3/4” (44) Only)Extra-Heavy Duty
Minimum Gage = 14
1
2
Full Flush
Seamless
DE 414
DE 414
SDI Classifi cations
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
64
Front outside
Back outside
refer to technical data sheet No. 102h & 102i
SOUND TRANSMISSION CONTROL (STC)
STC 48
Thickness – 1 3/4” (+/- 1/16”)
Actual Door Size – Door undersized from nominal by ¼” in width and 3/8” in height. Standard undercut is 1/4”. Undercut is contingent on threshold.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded to each skin at a maximum of 5” on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16” reinforcement (Backset 1/4”)
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel. 16 gage reinforcements for mortised or cylindrical locks are of an integral type in accordance with ANSI A115 standards.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – Special Sound Core
Face skin – 16 gage – Cold Roll Steel , A60 Galvanneal or G90 Galvanized
Closer Reinforcement (Required) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 4’0” x 8’0”
SDI 100 Grade / Model – Grade 3 / Model 2 (Physical Performance Level A)
(continued on back)
Edge Seam Construction – Intermittently welded edge seam (Optional - Continuous welded edge seam).
Universal Standard / Heavy Weight Hinge – Hinge fi llers are used allowing for an easy modifi cation from standard to heavy weight hinge prep – 5” hinges standard.
Handing Design – Non-Handed standard / Optional Handed design
STC 50 & 52 –
Thickness – 1 13/16” (+/- 1/16”)
Actual Door Size – Door undersized from nominal by 1/4” in width and 3/8” in height. Standard undercut is 1/4”. Undercut is contingent on threshold.
Hinge Rail & Reinforcement – Hinge edge is non-beveled and reinforced with a continuous 10 gage steel channel projection welded to each skin at a maximum of 5” on center.
Lock Rail – Lock edge is non-beveled and reinforced with a continuous 14 gage steel channel projection welded at a maximum of 5” on center.
Top Channel – Top channel is fl ush 16 gage channel, projection welded at a maximum of 2 1/2” on center
Bottom Channel – Bottom channel is 16 gage fl ush, projection welded at a maximum of 2 1/2” on center
Core – Special Sound Core
Face skin – 14 gage – Cold Roll Steel , A60 Galvanneal or G90 Galvanized
Closer Reinforcement (Required) – 14 gage standard / Optional 12 gage
Size Availability – Maximum 4’0” x 8’0”
SDI 100 Grade / Model – Grade 4 / Model 2 (Physical Performance Level A)
Edge Seam Construction – Intermittently welded edge seam standard. (Optional - continuous welded edge seam)
NOTE: STC Pairs available – Maximum rating 47
STC 48 - 50 - 52 and STC 47 Pairs
SECTION 08348 ACOUSTIC STEEL DOOR & FRAME ASSEMBLYSound Door Specifi cations
PART 1 - GENERAL1.4 Quality Assurance A. Sound Rating: Certify that the construction is identical to the Sound Transmission
Classifi cation (STC) assembly tested at an independent acoustical laboratory qualifi ed under NVLAP by the National Institute for Science and Technology (NIST) according to ASTME90 and that the STC rating according to ASTM E413 is not less than that specifi ed or scheduled. Minimum STC rating shall be one of the following: 48, 50, 52.
1.6 Warranty A. Material and workmanship shall be warranted by manufacturer for a period of one (1) year
from the date of shipment. Warranty shall apply to replacement or retrofi t of product only.1.7 Approved Manufacturers A. Republic Doors and Frames 155 Republic Drive McKenzie TN 38201 Phone: 800-733-3667 Fax: 800-723-6677PART 2 - PRODUCTS2.1 Materials A. All steels used to manufacture doors, frames, anchors and accessories shall be in
accordance with SDI-100/ANSI A250.8. B. Door Core - shall be manufacturer’s proprietary standard core to achieve specifi ed ratings. C. Shop primer shall be manufacturer’s standard rust inhibitive baked on or air dried shop
primer. D. Door seals shall be manufacturer’s standard adjustable sound seals. E. Hardware shall be manufacturer’s standard Cam-Lift hinges, door bottom, threshold, seals
and gaskets (when required).2.2 Fabrication A. Doors shall be minimum 14 gage (STC 50 & 52 = 1 13/16”), 16 gage (STC 48 = 1 3/4”),
(nominal), without visible joints on exposed faces. Reinforce top and bottom with “fl ush” steel channels of not less then 16 gage.
B. Door core shall be proprietary acoustic composite core as tested by manufacturer to meet specifi ed STC rating.
C. Frames shall be minimum 16 gage for STC 48, 14 gage for STC 50 & 52, face welded and ground smooth construction . Provide frames with minimum of three anchors per jamb suitable for adjoining wall construction. Provide anchors of not less then 0.042” in thickness or 0.167” diameter wire.
D. All frames shall be fully prepared for mortised hardware and reinforced only for surface mounted hardware. Drilling and/or tapping shall be completed by others.
E. Acoustical Seals shall be manufactured by ZERO International or Pemko.PART 3 - EXECUTION3.1 InstallationFor Acoustic GasketsRepublic’s tested STC system included:R-566 threshold, R-870 adjustable head and jamb seals, R-119 spring bronze head and jamb seals. 1. The R-119 spring bronze should be installed on the bottom of the door before hanging. 2. Install the R-566 threshold to suit fl oor condition. Caulk round the bottom of threshold along
with the entire perimeter of frame and at meeting edges of threshold and frame. 3. Close the door and measure the frame opening width and height. Install the R-870 head
piece fi rst (trim as necessary). Place the piece against the face of the door, making gentle contact between the “rubber extrusion” seal and the door, then fasten in place. Place the hinge side seal against the face of the door, making gentle contact between the “rubber
R-870FRAME SEAL
R-870FRAME SEAL
R-870FRAME SEAL
(5” Cam Lift Hinges Included)
STC DOORR-566
SURFACE MOUNTED AUTOMATIC DOOR
BOTTOM
R-566 1/2 “ THRESHOLD (ADA compliant)
1/2”
ACOUSTICAL FILLER BY INSTALLER
REPUBLIC ME SERIES STANDARD
FRAME
REPUBLIC SOUND DOOR
REPUBLIC PROPRIETARY SOUND CORE
R-119 SPRING BRONZE SEALS
UNDERCUT CONTINGENT ON THRESHOLD
2”5/
8”
5 3/4” MIN.
• Doors are available from STC 48 to STC 52 • Standard hollow metal frames (min. 5 3/4”
frame depth - welded • Flush top and bottom channel • SDI Level 3 & 4 - Maximum Duty - Performance
Level A • Sound resistant septum (proprietary
construction) • STC 48 and above furnished complete with
all perimeter seals, 5” Cam-lift hinges and threshold and door bottom
• Pairs available up to STC 47 • All doors tested in fully operable conditions
Testing & Certifi cation:
extrusion” seal and the door, then fasten in place. Place the strike side seal against the face of the door, making gentle contact between the rubber extrusion seal and the door, then fasten in place.
4. Install the R-119, head piece fi rst, then the hinge side and fi nally the lock side using the pressure sensitive tape to fasten the spring bronze to the frame.
5. Adjust the R-870 with the adjustment screws for the desired seal and operation of the door. 6. Check operation of the door after each piece of material is installed to make sure that no binding is
taking place.
All door systems tested in accordance with:ASTM E 90-04ASTM E 413-04ASTM E 1332-90ASTM E 2235-04
Testing was performed by:Architectural Testing Inc. &
Riverbank Acoustical Laboratories
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
65
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $ 85 $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 354 $ 80
Door Frame
Hinge Preparations Door FrameSpecial Hinge Locations No Charge No ChargeAdditional Hinge Prep (each) $ 19 $ 17 5" Standard or Heavy Weight Hinge Prep (each) Included Included Electric Hinge - cutout in one hinge reinf. (no junction box or conduit)
$ 18 $ 20
Power Transfer (no junction box or conduit) $ 103 $ 101 8" Junction Box Welded in N/A $ 58 14" Junction Box Welded in N/A $ 61
10" Junction Box Welded in Soffit N/A $ 59
Door FrameDoor - Lock / Frame - Strike Preparations
Standard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4" Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2" Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 Rim Reinforcement only *See Note $ 40 $ 20 Mortise ED Reinforcement with Function Prep $ 67 N/A Surface Vertical Rod Reinforcement only *See Note $ 65 $ 26 Concealed Vertical Rod (Strike) $ 481 N/A Exit Alarm Reinforcement only *See Note $ 50 $ 19
Special Constructions Door Frame
10 Gage Hinge and 14 Gage Lock Channels N/A N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge $ 191 N/A Bondo Filled Edge Included N/A Beveled Lock Edge (1/8" in 2") STC 48 only $ 23 N/A Door Viewer $ 23 N/A Conduit / Raceway - no wiring $ 143 N/A
See Engineering Section for further options and / or details
STC 48 - 50 - 52
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776 Note: STC 48 - 52 Frames are priced 7/16” Sgl Return, CRS, Face Welded construction. Frames must be fully grouted
or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors
have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES - Universal x 7/16” Single Return
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776
Note: STC 48 - 52 Frames are priced 1/2” Dbl Return, 14 gage, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless
edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES DW x 1/2” Dbl Return
Closer Preparations Door FrameCloser Reinforcement $ 30 $ 21Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Label Preparations Door Frame
Mark Numbers No Charge No Charge U.L. Mylar Label (standard unless specified otherwise)
N/A N/A
U.L. Metal Label N/A N/A Warnock Hersey Metal Label N/A N/A
Special Finish Door FrameSecond Coat of Primer $ 97 $ 85 Finish Paint Setup Charge $ 1,214 $ 1,214 Finish Paint (min. qty. 20 same door and frame colors) (price includes full carton wrap)
$ 195 $ 195
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per P&D) N/A $ 4
Frame Construction Door FrameUnit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A IncludedFull Profile Weld (3PC) N/A $ 141
Frame Profile Options Door FrameSingle Rabbet (minimum depth on STC is 5 3/4") N/A $ 43 4" Face Heads (Sgl or Dbl) N/A $ 48
Door Test Performance Characteristics Per ASTM E90 & E413
Transmission Loss in db/HertzSTC 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 500048 24 29 34 40 37 41 43 42 45 50 50 53 53 54 53 54 55 5450 19 30 36 40 42 45 46 42 49 50 50 51 53 54 56 57 55 5552 21 29 36 40 44 46 47 44 53 54 54 55 55 56 57 59 59 58
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
Univ x 7/16” Sgl Return x 14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$514 $612 $700 $806
$522 $628 $716 $822 $603 $692 $780 $886 $611 $708 $795 $901
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
DW x 1/2” Dbl Return x 14 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$554 $660 $760 $874
$562 $680 $776 $891
$650 $748 $845 $960 $657 $766 $861 $977
Effective April 4, 2020
14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8””thru
14 3/4”
14 7/8”thru20”
$437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804
14 Gage
5 7/8”6”
thru8 1/4”
8 3/8”” thru
13 7/8”
14”thru20”
$469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870
*NOTE: Republic Certified Acoustical Systems- tested with standard hardware applications. Surface applied hardware not recommended due to possible interference with seals and gaskets. Any break or tear in seals and gaskets my affect performance.
66
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $ 85 $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 354 $ 80
Door Frame
Hinge Preparations Door FrameSpecial Hinge Locations No Charge No ChargeAdditional Hinge Prep (each) $ 19 $ 17 5" Standard or Heavy Weight Hinge Prep (each) Included Included Electric Hinge - cutout in one hinge reinf. (no junction box or conduit)
$ 18 $ 20
Power Transfer (no junction box or conduit) $ 103 $ 101 8" Junction Box Welded in N/A $ 58 14" Junction Box Welded in N/A $ 61
10" Junction Box Welded in Soffit N/A $ 59
Door FrameDoor - Lock / Frame - Strike Preparations
Standard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4" Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2" Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 Rim Reinforcement only *See Note $ 40 $ 20 Mortise ED Reinforcement with Function Prep $ 67 N/A Surface Vertical Rod Reinforcement only *See Note $ 65 $ 26 Concealed Vertical Rod (Strike) $ 481 N/A Exit Alarm Reinforcement only *See Note $ 50 $ 19
Special Constructions Door Frame
10 Gage Hinge and 14 Gage Lock Channels N/A N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge $ 191 N/A Bondo Filled Edge Included N/A Beveled Lock Edge (1/8" in 2") STC 48 only $ 23 N/A Door Viewer $ 23 N/A Conduit / Raceway - no wiring $ 143 N/A
See Engineering Section for further options and / or details
STC 48 - 50 - 52
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776 Note: STC 48 - 52 Frames are priced 7/16” Sgl Return, CRS, Face Welded construction. Frames must be fully grouted
or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors
have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES - Universal x 7/16” Single Return
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776
Note: STC 48 - 52 Frames are priced 1/2” Dbl Return, 14 gage, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless
edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES DW x 1/2” Dbl Return
Closer Preparations Door FrameCloser Reinforcement $ 30 $ 21Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Label Preparations Door Frame
Mark Numbers No Charge No Charge U.L. Mylar Label (standard unless specified otherwise)
N/A N/A
U.L. Metal Label N/A N/A Warnock Hersey Metal Label N/A N/A
Special Finish Door FrameSecond Coat of Primer $ 97 $ 85 Finish Paint Setup Charge $ 1,214 $ 1,214 Finish Paint (min. qty. 20 same door and frame colors) (price includes full carton wrap)
$ 195 $ 195
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per P&D) N/A $ 4
Frame Construction Door FrameUnit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A IncludedFull Profile Weld (3PC) N/A $ 141
Frame Profile Options Door FrameSingle Rabbet (minimum depth on STC is 5 3/4") N/A $ 43 4" Face Heads (Sgl or Dbl) N/A $ 48
Door Test Performance Characteristics Per ASTM E90 & E413
Transmission Loss in db/HertzSTC 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 500048 24 29 34 40 37 41 43 42 45 50 50 53 53 54 53 54 55 5450 19 30 36 40 42 45 46 42 49 50 50 51 53 54 56 57 55 5552 21 29 36 40 44 46 47 44 53 54 54 55 55 56 57 59 59 58
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
Univ x 7/16” Sgl Return x 14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$514 $612 $700 $806
$522 $628 $716 $822 $603 $692 $780 $886 $611 $708 $795 $901
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
DW x 1/2” Dbl Return x 14 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$554 $660 $760 $874
$562 $680 $776 $891
$650 $748 $845 $960 $657 $766 $861 $977
Effective April 4, 2020
14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8””thru
14 3/4”
14 7/8”thru20”
$437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804
14 Gage
5 7/8”6”
thru8 1/4”
8 3/8”” thru
13 7/8”
14”thru20”
$469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870
*NOTE: Republic Certified Acoustical Systems- tested with standard hardware applications. Surface applied hardware not recommended due to possible interference with seals and gaskets. Any break or tear in seals and gaskets my affect performance.
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $ 85 $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 354 $ 80
Door Frame
Hinge Preparations Door FrameSpecial Hinge Locations No Charge No ChargeAdditional Hinge Prep (each) $ 19 $ 17 5" Standard or Heavy Weight Hinge Prep (each) Included Included Electric Hinge - cutout in one hinge reinf. (no junction box or conduit)
$ 18 $ 20
Power Transfer (no junction box or conduit) $ 103 $ 101 8" Junction Box Welded in N/A $ 58 14" Junction Box Welded in N/A $ 61
10" Junction Box Welded in Soffit N/A $ 59
Door FrameDoor - Lock / Frame - Strike Preparations
Standard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4" Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2" Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 Rim Reinforcement only *See Note $ 40 $ 20 Mortise ED Reinforcement with Function Prep $ 67 N/A Surface Vertical Rod Reinforcement only *See Note $ 65 $ 26 Concealed Vertical Rod (Strike) $ 481 N/A Exit Alarm Reinforcement only *See Note $ 50 $ 19
Special Constructions Door Frame
10 Gage Hinge and 14 Gage Lock Channels N/A N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge $ 191 N/A Bondo Filled Edge Included N/A Beveled Lock Edge (1/8" in 2") STC 48 only $ 23 N/A Door Viewer $ 23 N/A Conduit / Raceway - no wiring $ 143 N/A
See Engineering Section for further options and / or details
STC 48 - 50 - 52
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776 Note: STC 48 - 52 Frames are priced 7/16” Sgl Return, CRS, Face Welded construction. Frames must be fully grouted
or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors
have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES - Universal x 7/16” Single Return
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776
Note: STC 48 - 52 Frames are priced 1/2” Dbl Return, 14 gage, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless
edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES DW x 1/2” Dbl Return
Closer Preparations Door FrameCloser Reinforcement $ 30 $ 21Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Label Preparations Door Frame
Mark Numbers No Charge No Charge U.L. Mylar Label (standard unless specified otherwise)
N/A N/A
U.L. Metal Label N/A N/A Warnock Hersey Metal Label N/A N/A
Special Finish Door FrameSecond Coat of Primer $ 97 $ 85 Finish Paint Setup Charge $ 1,214 $ 1,214 Finish Paint (min. qty. 20 same door and frame colors) (price includes full carton wrap)
$ 195 $ 195
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per P&D) N/A $ 4
Frame Construction Door FrameUnit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A IncludedFull Profile Weld (3PC) N/A $ 141
Frame Profile Options Door FrameSingle Rabbet (minimum depth on STC is 5 3/4") N/A $ 43 4" Face Heads (Sgl or Dbl) N/A $ 48
Door Test Performance Characteristics Per ASTM E90 & E413
Transmission Loss in db/HertzSTC 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 500048 24 29 34 40 37 41 43 42 45 50 50 53 53 54 53 54 55 5450 19 30 36 40 42 45 46 42 49 50 50 51 53 54 56 57 55 5552 21 29 36 40 44 46 47 44 53 54 54 55 55 56 57 59 59 58
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
Univ x 7/16” Sgl Return x 14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$514 $612 $700 $806
$522 $628 $716 $822 $603 $692 $780 $886 $611 $708 $795 $901
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
DW x 1/2” Dbl Return x 14 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$554 $660 $760 $874
$562 $680 $776 $891
$650 $748 $845 $960 $657 $766 $861 $977
Effective April 4, 2020
14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8””thru
14 3/4”
14 7/8”thru20”
$437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804
14 Gage
5 7/8”6”
thru8 1/4”
8 3/8”” thru
13 7/8”
14”thru20”
$469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870
*NOTE: Republic Certified Acoustical Systems- tested with standard hardware applications. Surface applied hardware not recommended due to possible interference with seals and gaskets. Any break or tear in seals and gaskets my affect performance.
Steel TypesCold Rolled Steel Included IncludedA60 Galvanneal $ 85 $ 43 G90 Galvanized (available in 14 & 16 gage only) $ 354 $ 80
Door Frame
Hinge Preparations Door FrameSpecial Hinge Locations No Charge No ChargeAdditional Hinge Prep (each) $ 19 $ 17 5" Standard or Heavy Weight Hinge Prep (each) Included Included Electric Hinge - cutout in one hinge reinf. (no junction box or conduit)
$ 18 $ 20
Power Transfer (no junction box or conduit) $ 103 $ 101 8" Junction Box Welded in N/A $ 58 14" Junction Box Welded in N/A $ 61
10" Junction Box Welded in Soffit N/A $ 59
Door FrameDoor - Lock / Frame - Strike Preparations
Standard Lock (Strike) at Non Standard Location No Charge No ChargeCylindrical Dead Lock (2 3/4" Strike) $ 58 $ 20 Mortise Dead Lock (3 1/2" Strike) $ 66 $ 45 Electric Strike (no junction box or conduit) $ 106 $ 65 Rim Reinforcement only *See Note $ 40 $ 20 Mortise ED Reinforcement with Function Prep $ 67 N/A Surface Vertical Rod Reinforcement only *See Note $ 65 $ 26 Concealed Vertical Rod (Strike) $ 481 N/A Exit Alarm Reinforcement only *See Note $ 50 $ 19
Special Constructions Door Frame
10 Gage Hinge and 14 Gage Lock Channels N/A N/A Seal Top or Bottom Channel and Finish Smooth each
$ 65 N/A
Mag Switch / DPS - Hole only $ 17 $ 18 Mag Switch / DPS - Prep and reinf. (no junction box)
$ 130 $ 47
Continuous Welded Edge $ 191 N/A Bondo Filled Edge Included N/A Beveled Lock Edge (1/8" in 2") STC 48 only $ 23 N/A Door Viewer $ 23 N/A Conduit / Raceway - no wiring $ 143 N/A
See Engineering Section for further options and / or details
STC 48 - 50 - 52
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776 Note: STC 48 - 52 Frames are priced 7/16” Sgl Return, CRS, Face Welded construction. Frames must be fully grouted
or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors
have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES - Universal x 7/16” Single Return
Flush
STC Width Height Door
48Thru 3'0"
7'0"
$3,707 Over 3'0" thru 4'0" $3,994
50Thru 3'0" $4,071
Over 3'0" thru 4'0" $4,324
52Thru 3'0" $4,126
Over 3'0" thru 4'0" $4,380
48Thru 3'0"
8’0”
$4,004 Over 3'0" thru 4'0" $4,227
50Thru 3'0" $4,467
Over 3'0" thru 4'0" $4,720
52Thru 3'0" $4,523
Over 3'0" thru 4'0" $4,776
Note: STC 48 - 52 Frames are priced 1/2” Dbl Return, 14 gage, CRS, Face Welded construction. Frames must be fully grouted or filled with sound deadening insulation (by others.) Doors are priced CRS, Steel Stiffened core, Seamless
edge design, 16 gage for STC rating 48 - STC 50 & 52 are 14 gage. Materials are prepped for 5.0” Heavy Weight hinges. Doors have a 1/4” undercut due to threshold requirements. STC units prepped at 5-10-Equal hinge spacing.
SINGLES DW x 1/2” Dbl Return
Closer Preparations Door FrameCloser Reinforcement $ 30 $ 21Concealed Overhead Door Closer, Holder or Stop $ 264 $ 198
Label Preparations Door Frame
Mark Numbers No Charge No Charge U.L. Mylar Label (standard unless specified otherwise)
N/A N/A
U.L. Metal Label N/A N/A Warnock Hersey Metal Label N/A N/A
Special Finish Door FrameSecond Coat of Primer $ 97 $ 85 Finish Paint Setup Charge $ 1,214 $ 1,214 Finish Paint (min. qty. 20 same door and frame colors) (price includes full carton wrap)
$ 195 $ 195
Anchor Options Door FrameWelded in Prepared Opening Anchor (per anchor) N/A $ 14 Welded in Anchor (per anchor) N/A $ 7 Punch and Dimple Only (per P&D) N/A $ 4
Frame Construction Door FrameUnit Bundle (3PC) N/A $ 7 Standard Face Weld (3PC) N/A IncludedFull Profile Weld (3PC) N/A $ 141
Frame Profile Options Door FrameSingle Rabbet (minimum depth on STC is 5 3/4") N/A $ 43 4" Face Heads (Sgl or Dbl) N/A $ 48
Door Test Performance Characteristics Per ASTM E90 & E413
Transmission Loss in db/HertzSTC 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 500048 24 29 34 40 37 41 43 42 45 50 50 53 53 54 53 54 55 5450 19 30 36 40 42 45 46 42 49 50 50 51 53 54 56 57 55 5552 21 29 36 40 44 46 47 44 53 54 54 55 55 56 57 59 59 58
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
Univ x 7/16” Sgl Return x 14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8”thru
14 3/4”
14 7/8”thru20”
$514 $612 $700 $806
$522 $628 $716 $822 $603 $692 $780 $886 $611 $708 $795 $901
Flush
STC Width Height Door
47Thru 6'0"
7'0" $8,141
Over 6'0" thru 8'0" $8,648
47Thru 6'0"
8’0” $8,934
Over 6'0" thru 8'0" $9,441
Doubles Maximum STC Rating 47
DW x 1/2” Dbl Return x 14 Gage
5 7/8”6”
thru8 1/4”
8 3/8” thru
13 7/8”
14”thru20”
$554 $660 $760 $874
$562 $680 $776 $891
$650 $748 $845 $960 $657 $766 $861 $977
Effective April 4, 2020
14 Gage
5 3/4”5 7/8”thru
8 3/4”
8 7/8””thru
14 3/4”
14 7/8”thru20”
$437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $437 $533 $623 $730 $449 $544 $629 $735 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804 $516 $603 $692 $798 $528 $613 $698 $804
14 Gage
5 7/8”6”
thru8 1/4”
8 3/8”” thru
13 7/8”
14”thru20”
$469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $469 $575 $674 $791 $482 $586 $681 $797 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870 $554 $649 $748 $864 $567 $660 $753 $870
*NOTE: Republic Certified Acoustical Systems- tested with standard hardware applications. Surface applied hardware not recommended due to possible interference with seals and gaskets. Any break or tear in seals and gaskets my affect performance.
67
Front outside
Back outside
refer to technical data sheet No. 301
Republic pre-engineered steel frame components called “sticks” provide unlimited fl exibility for opening systems. Stick components are used to fabricate even the most complex entrance fronts, partitions and window wall designs. The variety of jamb depths and sizes permit greater design freedom. Because stick assemblies are normally welded, they offer strength without seams showing between vertical and horizontal members.
These openings can be designed for any job requirement, fabricated from factory components, assembled and welded by factory trained Republic Distributors. Because sticks can be shipped as components and fabricated locally, shipping costs, job delays and design limitations are greatly reduced.
Frame assemblies shall be made of standard stick components, fabricated from prime quality 16, 14 or 12 gage, cold-rolled or galvannealed steel. Where sticks are used at door openings in the frame assemblies, they shall be prepared for all hardware specifi ed. Frame assemblies shall be fabricated from three basic components: Open sections (perimeter members), Mullion sections (intermediate members) and Sill sections (bottom members).
Mullion sections shall have identical jamb depths and stops as open sections. Mullion sections are only available in 16 and 14 gage.
(continued on back)
Sill sections shall be fl ush with both faces of adjacent vertical members. The individual sticks shall be cut to length and notched to assure square joints and corners. All joints and corners of the frame assembly available welded and ground smooth at the face of the sections.
When specifi ed, steel panels shall be furnished 1 3/8” or 1 3/4” thick as required.
All stick components, steel panels and frame assemblies shall be phosphatized and receive one coat of force-cured rust inhibiting prime paint. Steel channel glazing beads shall be provided with the assemblies for all areas in which glass is to be installed.
Frame assemblies may be shipped to jobsite completely welded. Field joints shall be permitted only when the size of the total assembly exceeds shipping limitations. When frame assemblies are subjected to windloads, vertical members shall be free of fi eld splices.
Sticks are manufactured in 10’3” maximum lengths. Other lengths are available. Consult factory.
Other profi les are available upon request.
Universal SticksSE Series
Section Details of TypicalField Splice Connections
JAMBS(Open Sections)
Blank Jamb
Blank Jamb Drywall Return
Blank Jamb Single Rabbet
Blank Jamb Non Standard Face
Blank Mullion
Blank Jamb Filler No Stop
Blank Mullion Single Rabbet
Blank Jamb Filler with Stop
2 Way 3 Way
MULLIONS(Closed Sections)
BASES(Sill Section)
CORNER POSTS
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Effective April 4, 2020
68
Front outside
Back outside
refer to technical data sheet No. 301
Republic pre-engineered steel frame components called “sticks” provide unlimited fl exibility for opening systems. Stick components are used to fabricate even the most complex entrance fronts, partitions and window wall designs. The variety of jamb depths and sizes permit greater design freedom. Because stick assemblies are normally welded, they offer strength without seams showing between vertical and horizontal members.
These openings can be designed for any job requirement, fabricated from factory components, assembled and welded by factory trained Republic Distributors. Because sticks can be shipped as components and fabricated locally, shipping costs, job delays and design limitations are greatly reduced.
Frame assemblies shall be made of standard stick components, fabricated from prime quality 16, 14 or 12 gage, cold-rolled or galvannealed steel. Where sticks are used at door openings in the frame assemblies, they shall be prepared for all hardware specifi ed. Frame assemblies shall be fabricated from three basic components: Open sections (perimeter members), Mullion sections (intermediate members) and Sill sections (bottom members).
Mullion sections shall have identical jamb depths and stops as open sections. Mullion sections are only available in 16 and 14 gage.
(continued on back)
Sill sections shall be fl ush with both faces of adjacent vertical members. The individual sticks shall be cut to length and notched to assure square joints and corners. All joints and corners of the frame assembly available welded and ground smooth at the face of the sections.
When specifi ed, steel panels shall be furnished 1 3/8” or 1 3/4” thick as required.
All stick components, steel panels and frame assemblies shall be phosphatized and receive one coat of force-cured rust inhibiting prime paint. Steel channel glazing beads shall be provided with the assemblies for all areas in which glass is to be installed.
Frame assemblies may be shipped to jobsite completely welded. Field joints shall be permitted only when the size of the total assembly exceeds shipping limitations. When frame assemblies are subjected to windloads, vertical members shall be free of fi eld splices.
Sticks are manufactured in 10’3” maximum lengths. Other lengths are available. Consult factory.
Other profi les are available upon request.
Universal SticksSE Series
Section Details of TypicalField Splice Connections
JAMBS(Open Sections)
Blank Jamb
Blank Jamb Drywall Return
Blank Jamb Single Rabbet
Blank Jamb Non Standard Face
Blank Mullion
Blank Jamb Filler No Stop
Blank Mullion Single Rabbet
Blank Jamb Filler with Stop
2 Way 3 Way
MULLIONS(Closed Sections)
BASES(Sill Section)
CORNER POSTS
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Effective April 4, 2020
69
Universal Sticks SE Series
Universal (SE) Sticks 7/16” Single Return
16 GAGE
Description Height4 7/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”
Blank Jamb 10’3” $148 $168 $179 $197 $215 $281 Hinge Jamb 4.5 Hng preps 10’3” $184 $202 $212 $231 $248 $313 Strike Jamb ASA / 4 7/8" Stk 10’3” $171 $195 $202 $219 $239 $305 Filler w/Stop 10’3” $114 $139 $145 $164 $181 $247 Filler w/o Stop 10’3” $97 $120 $129 $148 $167 $233 Blank Jamb 4" Face 10’3” $189 $206 $215 $234 $251 $318 Blank Jamb 6" Face 10’3” $202 $223 $234 $251 $270 $335 Blank Jamb 8" Face 10’3” $208 $234 $235 $259 $286 $352 Blank Jamb 10" Face 10’3” $235 $247 $259 $273 $293 $359 Blank Jamb 12" Face 10’3” $257 $276 $282 $293 $306 $371 Blank Jamb Cased Open 10’3” $140 $164 $171 $189 $202 $269 Dbl Egress Blank Jamb Minimum JD 4 3/4" 10’3” $181 $208 $215 $251 $290 $356 Dbl Egress Hinge Jamb 4.5 Hng preps Minimum JD 4 3/4" 10’3” $218 $247 $251 $287 $326 $392 Blank Mullion 2" Face 10’3” $335 $383 $400 $435 $455 $520 Blank Mullion 4" Face 10’3” $438 $485 $503 $539 $559 $624 Blank Mullion 6" Face 10’3” $480 $528 $546 $581 $601 $667 Blank Mullion 8" Face 10’3” $539 $587 $604 $639 $659 $725 Blank Mullion 10" Face 10’3” $614 $662 $680 $715 $735 $800 Blank Mullion 12" Face 10’3” $702 $749 $768 $803 $822 $888 Hinge Mullion 4.5 Hng preps 10’3” $371 $415 $439 $487 $538 $603 Strike Mullion 10’3” $356 $400 $420 $455 $491 $556 2 Way Corner Post 10’3” $548 $622 $655 $721 $787 $854 3 Way Corner Post 10’3” $561 $636 $669 $736 $802 $866
16 GAGE
Description Height4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”
Blank Jamb 10’3” $ 120 $ 137 $ 145 $ 160 $ 175 $ 229 Hinge Jamb 4.5 Hng preps 10’3” $ 150 $ 165 $ 172 $ 188 $ 202 $ 256 Strike Jamb ASA / 4 7/8" Stk 10’3” $ 140 $ 158 $ 165 $ 179 $ 195 $ 249 Filler w/Stop 10’3” $ 92 $ 113 $ 117 $ 133 $ 147 $ 201 Filler w/o Stop 10’3” $ 78 $ 97 $ 104 $ 120 $ 136 $ 190 Blank Jamb 4" Face 10’3” $ 155 $ 168 $ 175 $ 191 $ 205 $ 259 Blank Jamb 6" Face 10’3” $ 165 $ 182 $ 191 $ 205 $ 220 $ 274 Blank Jamb 8" Face 10’3” $ 169 $ 191 $ 192 $ 212 $ 233 $ 287 Blank Jamb 10" Face 10’3” $ 192 $ 201 $ 212 $ 223 $ 240 $ 294 Blank Jamb 12" Face 10’3” $ 210 $ 225 $ 230 $ 240 $ 250 $ 304 Blank Jamb Cased Open 10’3” $ 114 $ 133 $ 140 $ 155 $ 165 $ 219 Dbl Egress Blank Jamb Minimum JD 4 3/4" 10’3” $ 147 $ 169 $ 175 $ 205 $ 237 $ 291 Dbl Egress Hinge Jamb 4.5 Hng preps Minimum JD 4 3/4" 10’3” $ 178 $ 201 $ 205 $ 234 $ 267 $ 321 Blank Mullion 2" Face 10’3” $ 274 $ 313 $ 328 $ 357 $ 373 $ 427 Blank Mullion 4" Face 10’3” $ 359 $ 398 $ 413 $ 442 $ 458 $ 512 Blank Mullion 6" Face 10’3” $ 394 $ 433 $ 448 $ 477 $ 493 $ 547 Blank Mullion 8" Face 10’3” $ 442 $ 481 $ 496 $ 525 $ 541 $ 595 Blank Mullion 10" Face 10’3” $ 504 $ 543 $ 558 $ 587 $ 603 $ 657 Blank Mullion 12" Face 10’3” $ 576 $ 615 $ 630 $ 659 $ 675 $ 729 Hinge Mullion 4.5 Hng preps 10’3” $ 304 $ 340 $ 360 $ 400 $ 441 $ 495 Strike Mullion 10’3” $ 291 $ 328 $ 343 $ 373 $ 402 $ 456 2 Way Corner Post 10’3” $ 450 $ 510 $ 537 $ 592 $ 647 $ 701 3 Way Corner Post 10’3” $ 460 $ 522 $ 549 $ 604 $ 658 $ 712
14 GAGE
4 7/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”
$185 $208 $221 $248 $273 $338 $225 $251 $259 $286 $311 $375 $212 $236 $244 $270 $294 $360 $145 $169 $179 $202 $218 $284 $119 $148 $156 $182 $208 $273 $255 $284 $289 $314 $339 $405 $236 $259 $270 $294 $322 $388 $263 $286 $294 $314 $335 $400 $292 $314 $322 $335 $347 $412 $322 $343 $354 $372 $392 $459 $179 $204 $218 $244 $270 $335 $231 $263 $277 $314 $354 $420 $270 $302 $314 $354 $392 $459 $403 $462 $495 $560 $625 $691 $507 $564 $597 $664 $729 $794 $548 $606 $639 $705 $771 $838 $606 $666 $699 $764 $829 $895 $682 $740 $774 $840 $905 $970 $770 $828 $861 $926 $992 $1,057 $439 $501 $519 $560 $598 $665 $430 $490 $511 $560 $602 $668 $648 $744 $789 $880 $971 $1,037 $666 $764 $810 $901 $989 $1,054
Frame Profile OptionsNo Returns N/C Cased Open N/C Single Rabbet $43Non Standard Face - (per piece) (1” - 3 7/8” Uniform) $102 Non Standard Face - (per piece) (1” - 3 7/8” Unequal) $100 Non Standard Rabbet (per piece) $44Kerf (includes weather-stripping) $141Non Standard Returns (uniform) $70
Steel Types
Cold Rolled Steel INCLUDED A60 Galvanneal - Jamb / Stick $30 A60 Galvanneal - Mullion $50 G90 Galvanized (available in 14 & 16 gage only) - Jamb / Stick $107 G90 Galvanized (available in 14 & 16 gage only) - Mullion $17612 Gage - Jamb / Stick (not available on mullions or drywall) (Add to 14 gage) *5/8 returns
$295
Hinge PreparationsSpecial Hinge Locations N/C 4 1/2” Heavy Weight Hinge Prep N/C Additional Hinge Prep (per hinge) $17 5” Standard or Heavy Weight Hinge Prep (per hinge) N/C
Frame - Strike PreparationsSpecial Strike Location N/C Standard Strike at Non Standard Location N/C Cylindrical Dead Lock (2 3/4" Strike) $20 Mortise Dead Lock (3 1/2" Strike) $45 ANSI 4 7/8" Strike - any location $17
See Engineering Section for further options and / or details
Effective April 4, 2020
14 GAGE
70
Universal Sticks SE SeriesUniversal (SE) Sticks 7/16” Single Return
16 GAGE
Description Height4 7/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”
Blank Jamb 10’3” $148 $168 $179 $197 $215 $281 Hinge Jamb 4.5 Hng preps 10’3” $184 $202 $212 $231 $248 $313 Strike Jamb ASA / 4 7/8" Stk 10’3” $171 $195 $202 $219 $239 $305 Filler w/Stop 10’3” $114 $139 $145 $164 $181 $247 Filler w/o Stop 10’3” $97 $120 $129 $148 $167 $233 Blank Jamb 4" Face 10’3” $189 $206 $215 $234 $251 $318 Blank Jamb 6" Face 10’3” $202 $223 $234 $251 $270 $335 Blank Jamb 8" Face 10’3” $208 $234 $235 $259 $286 $352 Blank Jamb 10" Face 10’3” $235 $247 $259 $273 $293 $359 Blank Jamb 12" Face 10’3” $257 $276 $282 $293 $306 $371 Blank Jamb Cased Open 10’3” $140 $164 $171 $189 $202 $269 Dbl Egress Blank Jamb Minimum JD 4 3/4" 10’3” $181 $208 $215 $251 $290 $356 Dbl Egress Hinge Jamb 4.5 Hng preps Minimum JD 4 3/4" 10’3” $218 $247 $251 $287 $326 $392 Blank Mullion 2" Face 10’3” $335 $383 $400 $435 $455 $520 Blank Mullion 4" Face 10’3” $438 $485 $503 $539 $559 $624 Blank Mullion 6" Face 10’3” $480 $528 $546 $581 $601 $667 Blank Mullion 8" Face 10’3” $539 $587 $604 $639 $659 $725 Blank Mullion 10" Face 10’3” $614 $662 $680 $715 $735 $800 Blank Mullion 12" Face 10’3” $702 $749 $768 $803 $822 $888 Hinge Mullion 4.5 Hng preps 10’3” $371 $415 $439 $487 $538 $603 Strike Mullion 10’3” $356 $400 $420 $455 $491 $556 2 Way Corner Post 10’3” $548 $622 $655 $721 $787 $854 3 Way Corner Post 10’3” $561 $636 $669 $736 $802 $866
16 GAGE
Description Height4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”
Blank Jamb 10’3” $ 120 $ 137 $ 145 $ 160 $ 175 $ 229 Hinge Jamb 4.5 Hng preps 10’3” $ 150 $ 165 $ 172 $ 188 $ 202 $ 256 Strike Jamb ASA / 4 7/8" Stk 10’3” $ 140 $ 158 $ 165 $ 179 $ 195 $ 249 Filler w/Stop 10’3” $ 92 $ 113 $ 117 $ 133 $ 147 $ 201 Filler w/o Stop 10’3” $ 78 $ 97 $ 104 $ 120 $ 136 $ 190 Blank Jamb 4" Face 10’3” $ 155 $ 168 $ 175 $ 191 $ 205 $ 259 Blank Jamb 6" Face 10’3” $ 165 $ 182 $ 191 $ 205 $ 220 $ 274 Blank Jamb 8" Face 10’3” $ 169 $ 191 $ 192 $ 212 $ 233 $ 287 Blank Jamb 10" Face 10’3” $ 192 $ 201 $ 212 $ 223 $ 240 $ 294 Blank Jamb 12" Face 10’3” $ 210 $ 225 $ 230 $ 240 $ 250 $ 304 Blank Jamb Cased Open 10’3” $ 114 $ 133 $ 140 $ 155 $ 165 $ 219 Dbl Egress Blank Jamb Minimum JD 4 3/4" 10’3” $ 147 $ 169 $ 175 $ 205 $ 237 $ 291 Dbl Egress Hinge Jamb 4.5 Hng preps Minimum JD 4 3/4" 10’3” $ 178 $ 201 $ 205 $ 234 $ 267 $ 321 Blank Mullion 2" Face 10’3” $ 274 $ 313 $ 328 $ 357 $ 373 $ 427 Blank Mullion 4" Face 10’3” $ 359 $ 398 $ 413 $ 442 $ 458 $ 512 Blank Mullion 6" Face 10’3” $ 394 $ 433 $ 448 $ 477 $ 493 $ 547 Blank Mullion 8" Face 10’3” $ 442 $ 481 $ 496 $ 525 $ 541 $ 595 Blank Mullion 10" Face 10’3” $ 504 $ 543 $ 558 $ 587 $ 603 $ 657 Blank Mullion 12" Face 10’3” $ 576 $ 615 $ 630 $ 659 $ 675 $ 729 Hinge Mullion 4.5 Hng preps 10’3” $ 304 $ 340 $ 360 $ 400 $ 441 $ 495 Strike Mullion 10’3” $ 291 $ 328 $ 343 $ 373 $ 402 $ 456 2 Way Corner Post 10’3” $ 450 $ 510 $ 537 $ 592 $ 647 $ 701 3 Way Corner Post 10’3” $ 460 $ 522 $ 549 $ 604 $ 658 $ 712
14 GAGE
4 7/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”
$185 $208 $221 $248 $273 $338 $225 $251 $259 $286 $311 $375 $212 $236 $244 $270 $294 $360 $145 $169 $179 $202 $218 $284 $119 $148 $156 $182 $208 $273 $255 $284 $289 $314 $339 $405 $236 $259 $270 $294 $322 $388 $263 $286 $294 $314 $335 $400 $292 $314 $322 $335 $347 $412 $322 $343 $354 $372 $392 $459 $179 $204 $218 $244 $270 $335 $231 $263 $277 $314 $354 $420 $270 $302 $314 $354 $392 $459 $403 $462 $495 $560 $625 $691 $507 $564 $597 $664 $729 $794 $548 $606 $639 $705 $771 $838 $606 $666 $699 $764 $829 $895 $682 $740 $774 $840 $905 $970 $770 $828 $861 $926 $992 $1,057 $439 $501 $519 $560 $598 $665 $430 $490 $511 $560 $602 $668 $648 $744 $789 $880 $971 $1,037 $666 $764 $810 $901 $989 $1,054
Frame Profile OptionsNo Returns N/C Cased Open N/C Single Rabbet $43Non Standard Face - (per piece) (1” - 3 7/8” Uniform) $102 Non Standard Face - (per piece) (1” - 3 7/8” Unequal) $100 Non Standard Rabbet (per piece) $44Kerf (includes weather-stripping) $141Non Standard Returns (uniform) $70
Steel Types
Cold Rolled Steel INCLUDED A60 Galvanneal - Jamb / Stick $30 A60 Galvanneal - Mullion $50 G90 Galvanized (available in 14 & 16 gage only) - Jamb / Stick $107 G90 Galvanized (available in 14 & 16 gage only) - Mullion $17612 Gage - Jamb / Stick (not available on mullions or drywall) (Add to 14 gage) *5/8 returns
$295
Hinge PreparationsSpecial Hinge Locations N/C 4 1/2” Heavy Weight Hinge Prep N/C Additional Hinge Prep (per hinge) $17 5” Standard or Heavy Weight Hinge Prep (per hinge) N/C
Frame - Strike PreparationsSpecial Strike Location N/C Standard Strike at Non Standard Location N/C Cylindrical Dead Lock (2 3/4" Strike) $20 Mortise Dead Lock (3 1/2" Strike) $45 ANSI 4 7/8" Strike - any location $17
See Engineering Section for further options and / or details
Effective April 4, 2020
14 GAGE
71
Back outside
refer to technical data sheet No. 201 & 202
ME
Gages – 16 and 14
Faces – 1” to 4”
Standard Rabbets – 1 9/16” and 1 15/16”
Stop – 5/8” standard
Single Return– 7/16” x Universal / Masonry profi le
Anchors – See Details
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet
MH
Gages – 16 and 14
Faces – 1” to 4”
Standard Rabbets – 1 9/16” and 1 15/16”
Stop – 5/8” standard
Double Return – 1/2” x Drywall profi le
Anchors - Drywall – Welded in compression anchors 3 1/2” in from each end standard
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet
(continued on back)
ME - MHBorrowed Lites
ME Corner Connection
Prepared Opening Anchor Wire Anchor
“T” AnchorWood Stud Anchor
MH Corner Connection
Must be welded in
Must be welded in
Compression AnchorStandard
L Strap Anchor(Optional)
“Z” Anchor
“Z” Anchor(Optional)
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
72
Back outside
refer to technical data sheet No. 201 & 202
ME
Gages – 16 and 14
Faces – 1” to 4”
Standard Rabbets – 1 9/16” and 1 15/16”
Stop – 5/8” standard
Single Return– 7/16” x Universal / Masonry profi le
Anchors – See Details
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet
MH
Gages – 16 and 14
Faces – 1” to 4”
Standard Rabbets – 1 9/16” and 1 15/16”
Stop – 5/8” standard
Double Return – 1/2” x Drywall profi le
Anchors - Drywall – Welded in compression anchors 3 1/2” in from each end standard
Profi les – Equal Rabbet, Unequal Rabbet, Single Rabbet
(continued on back)
ME - MHBorrowed Lites
ME Corner Connection
Prepared Opening Anchor Wire Anchor
“T” AnchorWood Stud Anchor
MH Corner Connection
Must be welded in
Must be welded in
Compression AnchorStandard
L Strap Anchor(Optional)
“Z” Anchor
“Z” Anchor(Optional)
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383Effective April 4, 2020
73
ME - M
H Borrowed Lites
ME Borrowed Lite MH Borrowed Lite
COMPONENTS UNIVERSAL FRAMES 7/16” Single Return
Header (Borrowed Lites require 2 each)
16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
Thru 3'0" $52 $58 $68 $77 $97 $119 Over 3'0" thru 4'0" $65 $72 $79 $91 $106 $127 Over 4'0" thru 6'0" $99 $107 $117 $129 $144 $164 Over 6'0" thru 8'0" $118 $126 $142 $152 $171 $191 Over 8'0" thru 9'0" $126 $136 $153 $165 $183 $200 Over 9'0" thru 10'0" $151 $164 $184 $200 $218 $234
Header (Borrowed Lites require 2 each)
14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
1'6" thru 3'0" $62 $71 $84 $95 $118 $135 Over 3'0" thru 4'0" $74 $86 $94 $110 $127 $149 Over 4'0" thru 6'0" $124 $132 $143 $161 $177 $190 Over 6'0" thru 8'0" $135 $143 $160 $177 $193 $206 Over 8'0" thru 9'0" $148 $159 $179 $197 $212 $226 Over 9'0" thru 10'0" $180 $196 $220 $242 $258 $275
Jamb Pairs16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
Thru 3'0" $129 $134 $165 $187 $220 $326 Over 3'0" thru 4'0" $149 $156 $176 $204 $230 $338 Over 4'0" thru 6'0" $232 $229 $253 $278 $307 $412 Over 6'0" thru 8'0" $251 $252 $282 $307 $340 $447 Over 8'0" thru 10'0" $265 $264 $312 $339 $367 $472
Jamb Pairs14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
Thru 3'0" $163 $163 $188 $217 $259 $350 Over 3'0" thru 4'0" $187 $184 $208 $233 $272 $361 Over 4'0" thru 6'0" $290 $279 $299 $333 $376 $462 Over 6'0" thru 8'0" $311 $302 $335 $362 $408 $494 Over 8'0" thru 10'0" $323 $318 $362 $389 $437 $519
COMPONENTS DRYWALL FRAMES 1/2” Double Return
Header (Borrowed Lites require 2 each)
16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Width
Thru 3'0" $54 $69 $75 $86 $106 $129 Over 3'0" thru 4'0" $71 $75 $85 $100 $117 $138 Over 4'0" thru 6'0" $99 $102 $116 $133 $151 $177 Over 6'0" thru 8'0" $115 $126 $137 $151 $170 $187 Over 8'0" thru 9'0" $129 $147 $162 $178 $196 $211 Over 9'0" thru 10'0" $169 $198 $218 $238 $259 $269
Jamb Pairs16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Height
Thru 3'0" $159 $182 $195 $218 $285 $322 Over 3'0" thru 4'0" $181 $193 $223 $247 $316 $352 Over 4'0" thru 6'0" $269 $253 $281 $307 $379 $413 Over 6'0" thru 8'0" $280 $273 $306 $334 $406 $440 Over 8'0" thru 10'0" $286 $296 $325 $352 $423 $454
Jamb Pairs14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Height
Thru 3'0" $202 $225 $234 $260 $331 $359 Over 3'0" thru 4'0" $223 $236 $261 $289 $361 $389 Over 4'0" thru 6'0" $309 $296 $318 $348 $423 $448 Over 6'0" thru 8'0" $326 $321 $349 $380 $459 $481 Over 8'0" thru 10'0" $343 $358 $381 $413 $494 $516
Header (Borrowed Lites require 2 each)
14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Width
Thru 3'0" $70 $81 $89 $99 $120 $148 Over 3'0" thru 4'0" $79 $90 $97 $116 $126 $160 Over 4'0" thru 6'0" $127 $138 $143 $158 $169 $195 Over 6'0" thru 8'0" $146 $163 $172 $183 $200 $225 Over 8'0" thru 9'0" $161 $184 $191 $205 $219 $246 Over 9'0" thru 10'0" $221 $243 $254 $267 $281 $309
NOTE: Drywall Borrowed Lite jamb pairs include 2 each compression anchors - welded in jamb(s). One at approximately 3.5” in from each end
See Engineering Section for further options and / or details
Frame Profile Options
No Returns No Charge Cased Open No Charge Single Rabbet $43 4" Face Heads (Sgl Or Dbl) $48 Non Standard Face - Pre Frame (1" - 3 7/8" Uniform) $102 Non Standard Rabbet $98 Non Standard Returns (Uniform) $70 Cold Rolled Steel Included A60 Galvanneal $43 G90 Galvannized (Avail In 14 & 16 Ga Only) $80 12 Ga - See Stick Section NA Second Coat Of Primer $85 Finish Paint Setup Charge (Never Waived) $1,214 Finish Pain (Min Qty 20 Units Colo) $195 Welded In Prepared Oopening Anchor (Per Anchor) $14 Welded In Anchor (Per Anchor) $7 Punch And Dimple Only (Per Prep) $4 Unit Bundle (Elevation) $19 Standard Face Weld (4Pc) $86 Full Profile Weld (4Pc) $141
Effective April 4, 2020
74
ME - M
H Borrowed Lites
ME Borrowed Lite MH Borrowed Lite
COMPONENTS UNIVERSAL FRAMES 7/16” Single Return
Header (Borrowed Lites require 2 each)
16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
Thru 3'0" $52 $58 $68 $77 $97 $119 Over 3'0" thru 4'0" $65 $72 $79 $91 $106 $127 Over 4'0" thru 6'0" $99 $107 $117 $129 $144 $164 Over 6'0" thru 8'0" $118 $126 $142 $152 $171 $191 Over 8'0" thru 9'0" $126 $136 $153 $165 $183 $200 Over 9'0" thru 10'0" $151 $164 $184 $200 $218 $234
Header (Borrowed Lites require 2 each)
14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Width
1'6" thru 3'0" $62 $71 $84 $95 $118 $135 Over 3'0" thru 4'0" $74 $86 $94 $110 $127 $149 Over 4'0" thru 6'0" $124 $132 $143 $161 $177 $190 Over 6'0" thru 8'0" $135 $143 $160 $177 $193 $206 Over 8'0" thru 9'0" $148 $159 $179 $197 $212 $226 Over 9'0" thru 10'0" $180 $196 $220 $242 $258 $275
Jamb Pairs16 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
Thru 3'0" $129 $134 $165 $187 $220 $326 Over 3'0" thru 4'0" $149 $156 $176 $204 $230 $338 Over 4'0" thru 6'0" $232 $229 $253 $278 $307 $412 Over 6'0" thru 8'0" $251 $252 $282 $307 $340 $447 Over 8'0" thru 10'0" $265 $264 $312 $339 $367 $472
Jamb Pairs14 GAGE
4 5/8”thru
5 3/4”
5 7/8”thru
7 3/4”
7 7/8”thru
8 3/4”
8 7/8”thru
11 3/4”
11 7/8”thru
14 3/4”
14 7/8”thru20”Height
Thru 3'0" $163 $163 $188 $217 $259 $350 Over 3'0" thru 4'0" $187 $184 $208 $233 $272 $361 Over 4'0" thru 6'0" $290 $279 $299 $333 $376 $462 Over 6'0" thru 8'0" $311 $302 $335 $362 $408 $494 Over 8'0" thru 10'0" $323 $318 $362 $389 $437 $519
COMPONENTS DRYWALL FRAMES 1/2” Double Return
Header (Borrowed Lites require 2 each)
16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Width
Thru 3'0" $54 $69 $75 $86 $106 $129 Over 3'0" thru 4'0" $71 $75 $85 $100 $117 $138 Over 4'0" thru 6'0" $99 $102 $116 $133 $151 $177 Over 6'0" thru 8'0" $115 $126 $137 $151 $170 $187 Over 8'0" thru 9'0" $129 $147 $162 $178 $196 $211 Over 9'0" thru 10'0" $169 $198 $218 $238 $259 $269
Jamb Pairs16 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Height
Thru 3'0" $159 $182 $195 $218 $285 $322 Over 3'0" thru 4'0" $181 $193 $223 $247 $316 $352 Over 4'0" thru 6'0" $269 $253 $281 $307 $379 $413 Over 6'0" thru 8'0" $280 $273 $306 $334 $406 $440 Over 8'0" thru 10'0" $286 $296 $325 $352 $423 $454
Jamb Pairs14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Height
Thru 3'0" $202 $225 $234 $260 $331 $359 Over 3'0" thru 4'0" $223 $236 $261 $289 $361 $389 Over 4'0" thru 6'0" $309 $296 $318 $348 $423 $448 Over 6'0" thru 8'0" $326 $321 $349 $380 $459 $481 Over 8'0" thru 10'0" $343 $358 $381 $413 $494 $516
Header (Borrowed Lites require 2 each)
14 GAGE
4 1/2”thru
5 7/8”
6”thru
7 1/8”
7 1/4”thru
8 1/4”
8 3/8”thru
10 7/8”
11 “thru
13 7/8”
14 7/8”thru20”Width
Thru 3'0" $70 $81 $89 $99 $120 $148 Over 3'0" thru 4'0" $79 $90 $97 $116 $126 $160 Over 4'0" thru 6'0" $127 $138 $143 $158 $169 $195 Over 6'0" thru 8'0" $146 $163 $172 $183 $200 $225 Over 8'0" thru 9'0" $161 $184 $191 $205 $219 $246 Over 9'0" thru 10'0" $221 $243 $254 $267 $281 $309
NOTE: Drywall Borrowed Lite jamb pairs include 2 each compression anchors - welded in jamb(s). One at approximately 3.5” in from each end
See Engineering Section for further options and / or details
Frame Profile Options
No Returns No Charge Cased Open No Charge Single Rabbet $43 4" Face Heads (Sgl Or Dbl) $48 Non Standard Face - Pre Frame (1" - 3 7/8" Uniform) $102 Non Standard Rabbet $98 Non Standard Returns (Uniform) $70 Cold Rolled Steel Included A60 Galvanneal $43 G90 Galvannized (Avail In 14 & 16 Ga Only) $80 12 Ga - See Stick Section NA Second Coat Of Primer $85 Finish Paint Setup Charge (Never Waived) $1,214 Finish Pain (Min Qty 20 Units Colo) $195 Welded In Prepared Oopening Anchor (Per Anchor) $14 Welded In Anchor (Per Anchor) $7 Punch And Dimple Only (Per Prep) $4 Unit Bundle (Elevation) $19 Standard Face Weld (4Pc) $86 Full Profile Weld (4Pc) $141
Effective April 4, 2020
75
Front outside
Back outside
refer to technical data sheet No. 304
The information contained herein has been prepared to permit architects, engineers and other qualifi ed persons to design and select the proper Republic standard stick components for use in fabricated frame assemblies when subjected to structural or wind loads.
Physical properties and wind load tables were calculated by a registered engineer and are based on the “Specifi cations for the Design of Cold-Formed Steel Structural Members”, 1969 Edition, published by the American Iron & Steel Institute.
Table I (See Technical Data) lists the physical properties of open sections. These sections are usually used as perimeter components in any frame assembly and are not critical components of that assembly because perimeter components must be securely anchored to building walls.
Table II (See Technical Data) lists the physical properties of the closed sections. These sections are usually used as the intermediate horizontal and vertical components and are usually found to be the critical sections in any frame assembly. The critical component in any frame assembly is usually the component having the longest unsupported length or supporting the largest frame area in wind loading.
The most frequently encountered problem is that of designing an intermediate component to resist wind loading only. For this reason, Table III (See Technical Data) is included. This table allows the designer to calculate the wind load on the component in pounds per linear foot and then select the proper section directly from the table.
(continued on back)
Cut & Notchand Panels
Cut-N-Notch & Welded UnitGage (14 or 16) 16
EXAMPLE PRICE SHEET
Material (CRS or A60) CRS
Jamb Depth: (3.00 thru 20) 534
QTY Description List Total (in inches) Material
192 @ Open Sections $ 1.20 $ 230.40 (each) Joints
8 @ Mitered Corner (per end) $ 8.70 $69.60(in inches) Glazing Bead
176 @ 5/8” tall glazing bead $ 0.45 $ 96.80(each) Anchors
4 @ Masonary $ 6.00 $ 24.00Welding
4 @ Corner Welds (Tab & Slot) $ 39.00 $ 156.00TOTAL $ 576.80
Cut-N-Notch & Welded UnitGage (14 or 16) 14
EXAMPLE PRICE SHEET
Material (CRS or A60) A60
Jamb Depth: (3.00 thru 12.75) 734QTY Description List Total
(in inches) Material248 @ Open Sections $ 1.75 $ 434.0044 @ 2” Face Mullion Section $ 3.75 $ 165.00
(each) Joints8 @ Mitered Corner (per end) $ 8.70 $ 69.602 @ Notched Closed Section
(per end) $ 13.00 $ 26.00
(in inches) Glazing Bead316 @ 5/8” tall glazing bead $ 0.55 $ 173.80
(each) Anchors4 @ Masonary $ 6.00 $ 24.00
Welding4 @ Corner Welds (Tab & Slot) $ 39.00 $ 156.002 @ Intersection Welds for 2”
(Notch) $ 64.00 $ 128.00
TOTAL $ 1,176.40
Cut-N-Notch & Welded UnitGage (14 or 16) 16
EXAMPLE PRICE SHEET
Material (CRS or A60) CRS
Jamb Depth: (3.00 thru 12.75) 734QTY Description List Total
(in inches) Material214 @ Open Sections $ 1.30 $ 278.2084 @ 2” Face Mullion Section $ 2.85 $ 239.40
(each) Joints6 @ Mitered Corner (per end) $ 8.70 $ 55.201 @ Notched Open Section
(per end) $ 8.70 $ 8.70
1 @ Notched Closed Section (per end)
$ 13.00 $ 13.00
(each) Hardware Preps1 @ ASA 4 7/8” Strike Prep $ 15.00 $ 15.003 @ 4 1/2 x 4 1/2 Hinge prep
(per hinge) $ 16.00 $ 48.00
1 @ Cut Open Back / weld in SA
$ 79.00 $ 79.00
(in inches) Glazing Bead112 @ 5/8” tall glazing bead $ 0.55 $ 61.60
(each) Anchors6 @ Masonary $ 6.00 $ 36.00
Welding3 @ Corner Welds (Tab & Slot) $ 39.00 $ 117.002 @ Intersection Welds for 2”
(Notch) $ 64.00 $ 128.00
TOTAL $ 1,076.10
Cut-N-Notch & Welded UnitGage (14 or 16) 16
EXAMPLE PRICE SHEET
Material (CRS or A60) A60
Jamb Depth: (3.00 thru 12.75) 834QTY Description List Total
(in inches) Material172 @ Open Sections $ 1.65 $ 283.80108 @ 2” Face Mullion Section $ 3.45 $ 372.6090 @ 4” Face (Sill Section) $ 2.50 $ 225.00
(each) Joints4 @ Mitered Corner (per end) $ 8.70 $ 34.802 @ Notched Open Section
(per end) $ 8.70 $ 17.40
3 @ Notched Closed Section (per end)
$ 13.00 $ 39.00
(each) Hardware Preps1 @ ASA 4 7/8” Strike Prep $ 15.00 $ 15.003 @ 4 1/2 x 4 1/2 Hinge prep
(per hinge) $ 16.00 $ 48.00
(in inches) Glazing Bead252 @ 5/8” tall glazing bead $ 0.55 $ 138.60
(each) Anchors6 @ Masonary $ 6.00 $ 36.002 @ Sill $ 6.00 $12.00
Welding2 @ Corner Welds (Tab & Slot) $ 39.00 $ 78.003 @ Intersection Welds for 2”
(Notch) $ 64.00 $ 192.00
2 @ Intersection Welds for 4” (Notch)
$ 78.00 $ 156.00
TOTAL $ 1,648.20
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Effective April 4, 2020
76
Front outside
Back outside
refer to technical data sheet No. 304
The information contained herein has been prepared to permit architects, engineers and other qualifi ed persons to design and select the proper Republic standard stick components for use in fabricated frame assemblies when subjected to structural or wind loads.
Physical properties and wind load tables were calculated by a registered engineer and are based on the “Specifi cations for the Design of Cold-Formed Steel Structural Members”, 1969 Edition, published by the American Iron & Steel Institute.
Table I (See Technical Data) lists the physical properties of open sections. These sections are usually used as perimeter components in any frame assembly and are not critical components of that assembly because perimeter components must be securely anchored to building walls.
Table II (See Technical Data) lists the physical properties of the closed sections. These sections are usually used as the intermediate horizontal and vertical components and are usually found to be the critical sections in any frame assembly. The critical component in any frame assembly is usually the component having the longest unsupported length or supporting the largest frame area in wind loading.
The most frequently encountered problem is that of designing an intermediate component to resist wind loading only. For this reason, Table III (See Technical Data) is included. This table allows the designer to calculate the wind load on the component in pounds per linear foot and then select the proper section directly from the table.
(continued on back)
Cut & Notchand Panels
Cut-N-Notch & Welded UnitGage (14 or 16) 16
EXAMPLE PRICE SHEET
Material (CRS or A60) CRS
Jamb Depth: (3.00 thru 20) 534
QTY Description List Total (in inches) Material
192 @ Open Sections $ 1.20 $ 230.40 (each) Joints
8 @ Mitered Corner (per end) $ 8.70 $69.60(in inches) Glazing Bead
176 @ 5/8” tall glazing bead $ 0.45 $ 96.80(each) Anchors
4 @ Masonary $ 6.00 $ 24.00Welding
4 @ Corner Welds (Tab & Slot) $ 39.00 $ 156.00TOTAL $ 576.80
Cut-N-Notch & Welded UnitGage (14 or 16) 14
EXAMPLE PRICE SHEET
Material (CRS or A60) A60
Jamb Depth: (3.00 thru 12.75) 734QTY Description List Total
(in inches) Material248 @ Open Sections $ 1.75 $ 434.0044 @ 2” Face Mullion Section $ 3.75 $ 165.00
(each) Joints8 @ Mitered Corner (per end) $ 8.70 $ 69.602 @ Notched Closed Section
(per end) $ 13.00 $ 26.00
(in inches) Glazing Bead316 @ 5/8” tall glazing bead $ 0.55 $ 173.80
(each) Anchors4 @ Masonary $ 6.00 $ 24.00
Welding4 @ Corner Welds (Tab & Slot) $ 39.00 $ 156.002 @ Intersection Welds for 2”
(Notch) $ 64.00 $ 128.00
TOTAL $ 1,176.40
Cut-N-Notch & Welded UnitGage (14 or 16) 16
EXAMPLE PRICE SHEET
Material (CRS or A60) CRS
Jamb Depth: (3.00 thru 12.75) 734QTY Description List Total
(in inches) Material214 @ Open Sections $ 1.30 $ 278.2084 @ 2” Face Mullion Section $ 2.85 $ 239.40
(each) Joints6 @ Mitered Corner (per end) $ 8.70 $ 55.201 @ Notched Open Section
(per end) $ 8.70 $ 8.70
1 @ Notched Closed Section (per end)
$ 13.00 $ 13.00
(each) Hardware Preps1 @ ASA 4 7/8” Strike Prep $ 15.00 $ 15.003 @ 4 1/2 x 4 1/2 Hinge prep
(per hinge) $ 16.00 $ 48.00
1 @ Cut Open Back / weld in SA
$ 79.00 $ 79.00
(in inches) Glazing Bead112 @ 5/8” tall glazing bead $ 0.55 $ 61.60
(each) Anchors6 @ Masonary $ 6.00 $ 36.00
Welding3 @ Corner Welds (Tab & Slot) $ 39.00 $ 117.002 @ Intersection Welds for 2”
(Notch) $ 64.00 $ 128.00
TOTAL $ 1,076.10
Cut-N-Notch & Welded UnitGage (14 or 16) 16
EXAMPLE PRICE SHEET
Material (CRS or A60) A60
Jamb Depth: (3.00 thru 12.75) 834QTY Description List Total
(in inches) Material172 @ Open Sections $ 1.65 $ 283.80108 @ 2” Face Mullion Section $ 3.45 $ 372.6090 @ 4” Face (Sill Section) $ 2.50 $ 225.00
(each) Joints4 @ Mitered Corner (per end) $ 8.70 $ 34.802 @ Notched Open Section
(per end) $ 8.70 $ 17.40
3 @ Notched Closed Section (per end)
$ 13.00 $ 39.00
(each) Hardware Preps1 @ ASA 4 7/8” Strike Prep $ 15.00 $ 15.003 @ 4 1/2 x 4 1/2 Hinge prep
(per hinge) $ 16.00 $ 48.00
(in inches) Glazing Bead252 @ 5/8” tall glazing bead $ 0.55 $ 138.60
(each) Anchors6 @ Masonary $ 6.00 $ 36.002 @ Sill $ 6.00 $12.00
Welding2 @ Corner Welds (Tab & Slot) $ 39.00 $ 78.003 @ Intersection Welds for 2”
(Notch) $ 64.00 $ 192.00
2 @ Intersection Welds for 4” (Notch)
$ 78.00 $ 156.00
TOTAL $ 1,648.20
155 Republic DriveMcKenzie, Tennessee 38201
731.352.3383
Effective April 4, 2020
77
Elevations / Cut and Notch Weld / Panels
Steel Types / Per inch
Cold Rolled Steel and A60 Galvannealed Included G90 Galvanized (available in 14 & 16 gage only) - Stick $0.25 G90 Galvanized (available in 14 & 16 gage only) - Mullion $0.25 12 Gage - Jamb / Stick (not available on mullions/add to 14 gage)
$3.24
Hinge PreparationsSpecial Hinge Locations No Charge 4.5” x 4.5” Hinge Prep (per hinge) $17 5” Standard or Heavy Weight Hinge Prep (per hinge) $17
Frame - Strike PreparationsSpecial Strike Location No Charge ANSI / 4 7/8” ASA Strike $17 Cylindrical Dead Lock (2 3/4” Strike) $20 Mortise Dead Lock (3 1/2” Strike) $45 Cut open backside of mullion / weld in sill anchor $79
Notching / WeldingMitered Corner - Per end (Jamb) N/A in 12 gage $12.00 Notched End - Per end (Jamb / Sill) $12.00 Notched End - Per end (Mullion) $15.00 Glazing Bead - 3/4” wide - cut to length / Bundled - per inch $0.58 Glazing Bead - 1/2” wide - cut to length / Bundled - per inch $0.82 Glazing Bead - Installed (Add to above) - per inch $1.20 Face Welding - Tab & Slot corner connection $40 Face Welding - 2” or less intersection $68 Face Welding - Over 2” up to 4” intersection $82 Face Welding - Over 4” up to 6” intersection $103 Face Welding - Over 6” up to 8” intersection $123 Face Welding - Over 8” up to 10” intersection $123 Face Welding - Over 10” up to 12” intersection $123 Field Splicing - per connection (Clips sold separately) $86 Splice/Weld over 10’ length $115
Specialty Options / Per Inch1/16" Lead Installed $17.10 1/8" Lead Installed $34.14 Bullet Resistant Level 1 & 6 $0.82 Bullet Resistant Level 2 & 3 $1.49 Bullet Resistant Level 4 $10.04 Bullet Resistant Level 5 $10.04 Bullet Resistant Level 7 & 8 $10.04
See Engineering Section for further options and / or details
Cut & Notch / Per inch
16 GAGEJamb Depth
14 GAGE
Components CRS A60 CRS A60Blank Jamb 2" Face $1.25 $1.50 4 5/8" THRU 5 3/4" $1.50 $1.75
$1.35 $1.60 5 7/8" THRU 7 3/4" $1.60 $1.80 $1.50 $1.70 7 7/8" THRU 8 3/4" $1.65 $1.90 $1.75 $2.00 8 7/8" THRU 11 3/4" $2.05 $2.25 $2.15 $2.45 11 7/8" THRU 14 3/4" $2.70 $3.00
$2.70 $3.05 14 7/8" THRU 20" $3.20 $3.40
Blank Mullion 2” Face $2.75 $3.15 4 5/8" THRU 5 3/4" $3.25 $3.70 $2.95 $3.30 5 7/8" THRU 7 3/4" $3.50 $3.85 $3.20 $3.55 7 7/8" THRU 8 3/4" $3.70 $4.10 $3.45 $3.65 8 7/8" THRU 11 3/4" $4.35 $4.75 $4.20 $4.50 11 7/8" THRU 14 3/4" $5.05 $5.40
$4.85 $5.05 14 7/8" THRU 20" $5.40 $5.75
BJ / 2 1/8” thru 4” Face $2.00 $2.20 4 5/8" THRU 5 3/4" $2.30 $2.70 $2.25 $2.45 5 7/8" THRU 7 3/4" $2.45 $2.90 $2.30 $2.60 7 7/8" THRU 8 3/4" $2.50 $3.00 $2.45 $2.90 8 7/8" THRU 11 3/4" $2.85 $3.25 $3.05 $3.30 11 7/8" THRU 14 3/4" $3.85 $4.25
$3.50 $3.80 14 7/8" THRU 20" $4.20 $4.75
BJ / 4 1/8” thru 6” Face $2.75 $3.10 4 5/8" THRU 5 3/4" $3.20 $3.65 $2.85 $3.15 5 7/8" THRU 7 3/4" $3.30 $3.70 $3.05 $3.35 7 7/8" THRU 8 3/4" $3.40 $3.75 $3.30 $3.60 8 7/8" THRU 11 3/4" $3.50 $3.95 $3.65 $4.00 11 7/8" THRU 14 3/4" $3.95 $4.45
$4.10 $4.55 14 7/8" THRU 20" $4.35 $4.85
BJ / 6 1/8” thru 8” Face $2.95 $3.35 4 5/8" THRU 5 3/4" $3.65 $3.95 $3.20 $3.50 5 7/8" THRU 7 3/4" $3.65 $4.00 $3.30 $3.60 7 7/8" THRU 8 3/4" $3.80 $4.10 $3.60 $3.95 8 7/8" THRU 11 3/4" $4.10 $4.50 $4.10 $4.50 11 7/8" THRU 14 3/4" $4.55 $4.95
$4.65 $5.00 14 7/8" THRU 20" $5.00 $5.30
BJ / 8 1/8” thru 10” Face $3.90 $4.25 4 5/8" THRU 5 3/4" $4.90 $5.40 $3.90 $4.15 5 7/8" THRU 7 3/4" $4.80 $5.25 $4.15 $4.35 7 7/8" THRU 8 3/4" $5.05 $5.50 $4.35 $4.55 8 7/8" THRU 11 3/4" $5.30 $5.75 $4.85 $4.90 11 7/8" THRU 14 3/4" $5.80 $6.35
$5.35 $5.40 14 7/8" THRU 20" $6.15 $6.70
BJ / 10 1/8” thru 12” Face $3.90 $4.25 4 5/8" THRU 5 3/4" $4.90 $5.40 $3.90 $4.20 5 7/8" THRU 7 3/4" $4.80 $5.25 $4.15 $4.55 7 7/8" THRU 8 3/4" $5.05 $5.50 $4.35 $4.75 8 7/8" THRU 11 3/4" $5.30 $5.75 $4.85 $6.90 11 7/8" THRU 14 3/4" $5.80 $6.35
$5.35 $7.35 14 7/8" THRU 20" $6.15 $6.70
Filler Section $1.30 $1.80 4 5/8" THRU 5 3/4" $1.55 $2.15
$1.35 $1.90 5 7/8" THRU 7 3/4" $1.60 $2.10 $1.40 $1.95 7 7/8" THRU 8 3/4" $1.75 $2.15 $1.55 $2.05 8 7/8" THRU 11 3/4" $1.90 $2.30 $1.70 $2.25 11 7/8" THRU 14 3/4" $2.05 $2.60
$2.20 $2.80 14 7/8" THRU 20" $2.45 $3.05
16 GAGEJamb Depth
14 GAGE
Components CRS A60 CRS A60
Corner Posts 2/3 Way $4.60 $5.05 4 5/8" THRU 5 3/4" $5.50 $6.05
$4.95 $5.30 5 7/8" THRU 7 3/4" $5.85 $6.40 $5.35 $5.70 7 7/8" THRU 8 3/4" $6.25 $6.75 $5.85 $6.30 8 7/8" THRU 11 3/4" $7.10 $7.55 $6.80 $7.10 11 7/8" THRU 14 3/4" $8.15 $8.70
$7.25 $7.60 14 7/8" THRU 20" $8.45 $8.90
Panels Non-Label Panels
20 Gage Base Price $236 Add Per Sq. Ft. $23 18 Gage Base Price $236 Add Per Sq. Ft. $30 16 Gage Base Price $236 Add Per Sq. Ft. $31 14 Gage Base Price $236 Add Per Sq. Ft. $39
Label Panels20 Gage Base Price $292 Add Per Sq. Ft. $23 18 Gage Base Price $292 Add Per Sq. Ft. $30 16 Gage Base Price $292 Add Per Sq. Ft. $31 14 Gage Base Price $292 Add Per Sq. Ft. $42
OptionsA60 Galvannealed $85 G90 Galvanized (available 16 & 14 gage only) $354 Flat Bar Astragal Attached to Bottom of Panel $92 Polystyrene Core $32 Flush Bolt Strike $210
Frame Profile Options / Per inch
No Returns No Charge Cased Open No Charge Single Rabbet $0.35 Non Standard Face Jamb - Per Inch (1" - 3 7/8" Uniform $0.67 Non Standard Face Jamb - Per Inch (1" - 3 7/8" Unequal $0.88 Non Standard Rabbet $0.36 Kerf (Includes Weather-Stripping) (16Ga Only) $0.52 Non Standard Returns (Uniform) $0.57 2 1/8" Thru 4" Face Mullion - Add To 2" Face Mullion $0.26 4 1/8" Thru 6" Face Mullion - Add To 2" Face Mullion $0.67 6 1/8" Thru 8" Face Mullion - Add To 2" Face Mullion $0.98 8 1/8" Thru 10" Face Mullion - Add To 2" Face Mullion $1.29 10 1/8" Thru 12" Face Mullion - Add To 2" Face Mullion $1.70 Weld In Filler $2.25
Maximum size 4’0” x 4’0”When either dimension exceeds 48” price as door
Effective April 4, 2020
78
Elevations / Cut and Notch Weld / Panels
Steel Types / Per inch
Cold Rolled Steel and A60 Galvannealed Included G90 Galvanized (available in 14 & 16 gage only) - Stick $0.25 G90 Galvanized (available in 14 & 16 gage only) - Mullion $0.25 12 Gage - Jamb / Stick (not available on mullions/add to 14 gage)
$3.24
Hinge PreparationsSpecial Hinge Locations No Charge 4.5” x 4.5” Hinge Prep (per hinge) $17 5” Standard or Heavy Weight Hinge Prep (per hinge) $17
Frame - Strike PreparationsSpecial Strike Location No Charge ANSI / 4 7/8” ASA Strike $17 Cylindrical Dead Lock (2 3/4” Strike) $20 Mortise Dead Lock (3 1/2” Strike) $45 Cut open backside of mullion / weld in sill anchor $79
Notching / WeldingMitered Corner - Per end (Jamb) N/A in 12 gage $12.00 Notched End - Per end (Jamb / Sill) $12.00 Notched End - Per end (Mullion) $15.00 Glazing Bead - 3/4” wide - cut to length / Bundled - per inch $0.58 Glazing Bead - 1/2” wide - cut to length / Bundled - per inch $0.82 Glazing Bead - Installed (Add to above) - per inch $1.20 Face Welding - Tab & Slot corner connection $40 Face Welding - 2” or less intersection $68 Face Welding - Over 2” up to 4” intersection $82 Face Welding - Over 4” up to 6” intersection $103 Face Welding - Over 6” up to 8” intersection $123 Face Welding - Over 8” up to 10” intersection $123 Face Welding - Over 10” up to 12” intersection $123 Field Splicing - per connection (Clips sold separately) $86 Splice/Weld over 10’ length $115
Specialty Options / Per Inch1/16" Lead Installed $17.10 1/8" Lead Installed $34.14 Bullet Resistant Level 1 & 6 $0.82 Bullet Resistant Level 2 & 3 $1.49 Bullet Resistant Level 4 $10.04 Bullet Resistant Level 5 $10.04 Bullet Resistant Level 7 & 8 $10.04
See Engineering Section for further options and / or details
Cut & Notch / Per inch
16 GAGEJamb Depth
14 GAGE
Components CRS A60 CRS A60Blank Jamb 2" Face $1.25 $1.50 4 5/8" THRU 5 3/4" $1.50 $1.75
$1.35 $1.60 5 7/8" THRU 7 3/4" $1.60 $1.80 $1.50 $1.70 7 7/8" THRU 8 3/4" $1.65 $1.90 $1.75 $2.00 8 7/8" THRU 11 3/4" $2.05 $2.25 $2.15 $2.45 11 7/8" THRU 14 3/4" $2.70 $3.00
$2.70 $3.05 14 7/8" THRU 20" $3.20 $3.40
Blank Mullion 2” Face $2.75 $3.15 4 5/8" THRU 5 3/4" $3.25 $3.70 $2.95 $3.30 5 7/8" THRU 7 3/4" $3.50 $3.85 $3.20 $3.55 7 7/8" THRU 8 3/4" $3.70 $4.10 $3.45 $3.65 8 7/8" THRU 11 3/4" $4.35 $4.75 $4.20 $4.50 11 7/8" THRU 14 3/4" $5.05 $5.40
$4.85 $5.05 14 7/8" THRU 20" $5.40 $5.75
BJ / 2 1/8” thru 4” Face $2.00 $2.20 4 5/8" THRU 5 3/4" $2.30 $2.70 $2.25 $2.45 5 7/8" THRU 7 3/4" $2.45 $2.90 $2.30 $2.60 7 7/8" THRU 8 3/4" $2.50 $3.00 $2.45 $2.90 8 7/8" THRU 11 3/4" $2.85 $3.25 $3.05 $3.30 11 7/8" THRU 14 3/4" $3.85 $4.25
$3.50 $3.80 14 7/8" THRU 20" $4.20 $4.75
BJ / 4 1/8” thru 6” Face $2.75 $3.10 4 5/8" THRU 5 3/4" $3.20 $3.65 $2.85 $3.15 5 7/8" THRU 7 3/4" $3.30 $3.70 $3.05 $3.35 7 7/8" THRU 8 3/4" $3.40 $3.75 $3.30 $3.60 8 7/8" THRU 11 3/4" $3.50 $3.95 $3.65 $4.00 11 7/8" THRU 14 3/4" $3.95 $4.45
$4.10 $4.55 14 7/8" THRU 20" $4.35 $4.85
BJ / 6 1/8” thru 8” Face $2.95 $3.35 4 5/8" THRU 5 3/4" $3.65 $3.95 $3.20 $3.50 5 7/8" THRU 7 3/4" $3.65 $4.00 $3.30 $3.60 7 7/8" THRU 8 3/4" $3.80 $4.10 $3.60 $3.95 8 7/8" THRU 11 3/4" $4.10 $4.50 $4.10 $4.50 11 7/8" THRU 14 3/4" $4.55 $4.95
$4.65 $5.00 14 7/8" THRU 20" $5.00 $5.30
BJ / 8 1/8” thru 10” Face $3.90 $4.25 4 5/8" THRU 5 3/4" $4.90 $5.40 $3.90 $4.15 5 7/8" THRU 7 3/4" $4.80 $5.25 $4.15 $4.35 7 7/8" THRU 8 3/4" $5.05 $5.50 $4.35 $4.55 8 7/8" THRU 11 3/4" $5.30 $5.75 $4.85 $4.90 11 7/8" THRU 14 3/4" $5.80 $6.35
$5.35 $5.40 14 7/8" THRU 20" $6.15 $6.70
BJ / 10 1/8” thru 12” Face $3.90 $4.25 4 5/8" THRU 5 3/4" $4.90 $5.40 $3.90 $4.20 5 7/8" THRU 7 3/4" $4.80 $5.25 $4.15 $4.55 7 7/8" THRU 8 3/4" $5.05 $5.50 $4.35 $4.75 8 7/8" THRU 11 3/4" $5.30 $5.75 $4.85 $6.90 11 7/8" THRU 14 3/4" $5.80 $6.35
$5.35 $7.35 14 7/8" THRU 20" $6.15 $6.70
Filler Section $1.30 $1.80 4 5/8" THRU 5 3/4" $1.55 $2.15
$1.35 $1.90 5 7/8" THRU 7 3/4" $1.60 $2.10 $1.40 $1.95 7 7/8" THRU 8 3/4" $1.75 $2.15 $1.55 $2.05 8 7/8" THRU 11 3/4" $1.90 $2.30 $1.70 $2.25 11 7/8" THRU 14 3/4" $2.05 $2.60
$2.20 $2.80 14 7/8" THRU 20" $2.45 $3.05
16 GAGEJamb Depth
14 GAGE
Components CRS A60 CRS A60
Corner Posts 2/3 Way $4.60 $5.05 4 5/8" THRU 5 3/4" $5.50 $6.05
$4.95 $5.30 5 7/8" THRU 7 3/4" $5.85 $6.40 $5.35 $5.70 7 7/8" THRU 8 3/4" $6.25 $6.75 $5.85 $6.30 8 7/8" THRU 11 3/4" $7.10 $7.55 $6.80 $7.10 11 7/8" THRU 14 3/4" $8.15 $8.70
$7.25 $7.60 14 7/8" THRU 20" $8.45 $8.90
Panels Non-Label Panels
20 Gage Base Price $236 Add Per Sq. Ft. $23 18 Gage Base Price $236 Add Per Sq. Ft. $30 16 Gage Base Price $236 Add Per Sq. Ft. $31 14 Gage Base Price $236 Add Per Sq. Ft. $39
Label Panels20 Gage Base Price $292 Add Per Sq. Ft. $23 18 Gage Base Price $292 Add Per Sq. Ft. $30 16 Gage Base Price $292 Add Per Sq. Ft. $31 14 Gage Base Price $292 Add Per Sq. Ft. $42
OptionsA60 Galvannealed $85 G90 Galvanized (available 16 & 14 gage only) $354 Flat Bar Astragal Attached to Bottom of Panel $92 Polystyrene Core $32 Flush Bolt Strike $210
Frame Profile Options / Per inch
No Returns No Charge Cased Open No Charge Single Rabbet $0.35 Non Standard Face Jamb - Per Inch (1" - 3 7/8" Uniform $0.67 Non Standard Face Jamb - Per Inch (1" - 3 7/8" Unequal $0.88 Non Standard Rabbet $0.36 Kerf (Includes Weather-Stripping) (16Ga Only) $0.52 Non Standard Returns (Uniform) $0.57 2 1/8" Thru 4" Face Mullion - Add To 2" Face Mullion $0.26 4 1/8" Thru 6" Face Mullion - Add To 2" Face Mullion $0.67 6 1/8" Thru 8" Face Mullion - Add To 2" Face Mullion $0.98 8 1/8" Thru 10" Face Mullion - Add To 2" Face Mullion $1.29 10 1/8" Thru 12" Face Mullion - Add To 2" Face Mullion $1.70 Weld In Filler $2.25
Maximum size 4’0” x 4’0”When either dimension exceeds 48” price as door
Effective April 4, 2020
79
EngineeringFRAME DOORSteel Types
Cold Rolled Steel Included Included A60 Galvanneal $43 $85 G90 Galvanized (available in 14 & 16 gage only) $80 $354 12 Gage - See Stick section for frames. Frames must be square cut or cut and notch connection(s). Welding required (not included) *5/8” returns NA Unavailable
Hinge Preparations
Special Hinge Locations No charge No charge 4 1/2” Heavy Weight Hinge Prep (1) prep for every 30” in height No charge No charge Additional Hinge Prep (per hinge) $17 $19 4” Template Hinge Prep - Sq. Corner only (per hinge) $46 $46 5” Standard or Heavy Weight Hinge Prep (per hinge) No charge No charge Non Standard Height 6” - 8” hinge (per hinge) $180 $180 Double Mortise Hinge (per hinge) N/A $41 Invisible Hinge prep (SOSS) (per hinge) (includes drilling and tapping) $214 $214 Anchor Hinge Prep (no drilling or tapping) (per hinge) $250 $403 Electric Hinge (one 1/2” dia. Hole in one hinge reinf., no wiring included) No Conduit (no junction box) $20 $18 Surface Mounted Hinges (reinforcement only) N/A $90 Continuous Hinge Reinforcement - Frame, located either on Rabbet or Face / Door, located on either hinge edge or approx 4” on face of hinge side
$65 $69
High Frequency Hinge reinforcement (per hinge) (Typical top hinge only) $18 N/A Double Acting hinge reinforcement (Eliason) 12 Gage - 24” up x JD @ bottom / 12” down x JD @ top - per jamb $87 N/A Double Acting hinge reinforcement 12 Gage - 12” x JD per location $31 N/A Full Height reinforcement 12 Gage - 2” x Hgt. $93 N/A Power Transfer (no junction box or conduit) Cutout with reinforcement / tap plate(s) $101 $103 Special Backset (per hinge) $54 $103 Handed Hinge Prep N/A $21
FRAME DOOR
FRAME DOOR
Pivot OptionsOffset or Intermediate - Per Prep ( no drilling or tapping) $135 $139 Center Hung - Per Prep (no drilling or tapping) $223 N/A Rescue Hardware Prep (one pivot prep (no drilling or tapping) and emergency stop) $90 N/A Double Lipped Strike - Per Prep $132 $157 Pocket Pivot - Per Prep (no drilling or tapping in door) $199 $266
FRAME DOORCore OptionsHoneycomb N/A Included Polystyrene Insulated - "U" Factor = .41 / "R" Factor = 2.43 (Per ASTM C1363) N/A $32 Polyurethane Insulated - "U" Factor = .39 / "R" Factor = 2.56 - NOT AVAILABLE AS FIRE RATED (Per ASTM C1363) N/A $173 Steel Stiffened (20 gage standard) - "U" Factor = .61 / "R" Factor = 1.65 (Per ASTM C1363) N/A $236 Steel Stiffened (18 gage option) N/A $295 Steel Stiffened (16 gage option) N/A $414 Steel Stiffened with 20 gage stiffeners & Polystyrene insulation between stiffeners N/A $278 Temperature Rise 250 Degree N/A $770
Effective April 4, 2020
80
Engin
eerin
gStrike / Lock Preparations FRAME DOOR
Special Strike or Lock Location No charge No charge ANSI 4 7/8” Strike prep $17 $47 Mortise Lock Prep - Gov’t 86 edge with function holes N/A $56 Mortise Lock prep for 1 3/8” Thick Door N/A $56 Cylindrical Dead Lock prep, Frame - 2 3/4” or 4 7/8” strike (lipped or non lipped) / Door - Gov’t 160 or 161 prep $20 $58 Mortise Dead Lock prep, Frame - 3 1/2” or 4 7/8” strike (lipped or non lipped) / Door - Gov’t 86 Mort Lock prep $45 $66 Card Reader Lock prep (ex. Vingcard) N/A $64 Unit or Mono Lock (ANSI - A115.6) N/A $66 Special Backset (over 5”) N/A $39 Rim Reinforcement only $20 $40 Rim Reinforcement with function prep N/A $52 Mortise ED Reinforcement Only N/A $29 Mortise ED Reinforcement with Function Prep N/A $67 Surface Vertical Rod Reinforcement only $26 $65 Surface Vertical Rod Reinforcement with Function Prep N/A $156 Concealed Vertical Rod - Frame mortise strike (per prep) / Door per template $52 $481 Exit Alarm Reinforcement only $19 $50 Inset Exit Device (14 and 16 gage doors only) N/A $544 Push Pull Reinforcement N/A $31 Electric Strike mortise prep (no junction box)(no conduit) $65 $106 Flush Bolt - Strike Prep Frame, Reversible or Automatic / Door - edge, top and bottom prep - ANSI A115.4 $47 $68 Surface Bolt Reinforce only $21 $31 Detention / Security Lock (ex. FA NS400 / Brinks 3526) $147 $524 Non standard gage / special thickness strike reinforcement (Standard prep) $58 N/A Flush Cup Pull Prep (per side) N/A $116 Roller Latch (strike in frame / latch in door) $34 $69 Fire Bolt/Popper (each prep) N/A $35
Inactive Leaf Preparations FRAME DOORFlush Bolt Embossment in Top/Bottom Channel N/A No chargeANSI (4 7/8”) Strike only N/A $47 Cylindrical (2 3/4”) or Mortise (3 1/2”) Deadlock Strike N/A $58 Attaching Astragal (includes Astragal) N/A $70 Open Back Strike N/A $126
Closer Preparation FRAME DOOR
Closer Reinforcement - Frame 14 GA x 14” Plate - RA or PA / Door 14 GA x 18” x 6” $21 $30 Door - Optional 12 Gage Reinforcement N/A $56 Frame - Full Depth Reinforcement (price per foot) $28 N/A Coordinator Reinforcement $21 N/A Door - Full Width Reinforcement (price per 18”) N/A $30 Concealed Overhead Door Closer, Holder or Stop (no drilling or tapping) $198 $264 Surface mounted overhead stop / holder reinforcement $53 N/A
Effective April 4, 2020
81
EngineeringSpecial Constructions FRAME DOORSpecial Width (use next larger size) (max 4’10” on doors) No charge No charge Special Height (use next larger size) (max 10’0” on doors) No charge No charge Undercut - under 3/8” price next larger size N/A No charge Inverted Top Channel (Standard Flush) N/A No charge Flush Bottom Channel (Standard inverted) N/A No charge Seal Top or Bottom Channel and Finish Smooth (per each) N/A $65 Bondo Filled Edge (includes both hinge and lock edge) N/A $90 Continuous Welded Edge (not available in 20 gage) (includes hinge and lock edge ) N/A $191 Unifit Channel - consult factory for availability N/A $70 Communicating (6) 4.5 hinge preps x (2) 4 7/8” ASA preps or (2) 2 3/4” strike preps $68 N/A Dutch prep (4) 4.5 hinge preps x (1) ASA preps (refer to inactive options for ASA in either top or bottom leaf) $67 $70 Cap Top of Jamb (each) $64 N/A Mag Switch / DPS - Hole only $18 $17 Mag Switch / DPS - Prep and reinf. (no junction box) $47 $130 Hospital Stop (Galv) up to 6” $193 N/A 8” Junction Box Welded in $58 N/A 14” Junction Box Welded in $61 N/A 10” Junction Box Welded in Soffit $59 N/A Removeable HM Mullion prep - notch (1) end of piece, weld in angle clip(s) $69 N/A Removeable HM Mullion reinforcement only $17 N/A Removeable Hardware Mullion reinforcement only $17 N/A Beveled Lock Edge (1/8” in 2”) Unavailable on Inactive leafs with strike(s) N/A $23 10 Gage Hinge and 14 Gage Lock Channels DE Series (standard on 14 gage door) N/A $122 1 3/8” Thick Door - DE Series - Steel Stiffened core not available N/A $122
NOTE: 6’8” door - standard (2) 3.5” hinges, (1) CH lock prep (2 1/8” Bore x 2 3/4” Backset / 1” x 2 1/4” Edge) Fire Rated 6’8” requires (3) hinge preps - ADD (1) hinge prep.
Non Standard Rabbet / 2” or 2 1/4” Thick Door NOTE: Price includes DE Series (14 gage), stiffened core, square edge only $124 $2,467 14 GA Top or Bottom Channel (per each) N/A $58 Rabbeted Door or Panel (per edge) N/A $590 Wicket Door prep (add to (2) doors) N/A $872 Door Viewer (Max 2" Dia) N/A $23 Mail Slot / Food Service Pass thru (up to 100 sq. in.) - cutout only N/A $183 Monorail prep (per leaf) N/A $361 Automatic Door Bottom (mortise type) N/A $227 Conduit / Raceway installed in door- no wiring (not available in DP) N/A $143
Label Preparations FRAME DOOR
Mark Numbers No charge No chargeU.L. Mylar label (standard unless specified otherwise) $17 $17 U.L. Metal Label $28 $32 Warnock Hersey Metal Label $28 $32 Hurricane $28 $32
Effective April 4, 2020
82
Engin
eerin
gSpecial Finish Preparations FRAME DOOR
Second Coat of Republic Primer $85 $97 Finish Paint Setup Charge (never waived) $1,214 $1,214 Finish Paint (min. qty. 20 doors or 3pc frames per color) (price includes full carton wrap) $195 $195
* Finish paint not available with welded frames
Anchor Options FRAME DOOR
Welded in Prepared Opening Anchor - Punch & Dimple w/anchor (per anchor) $14 N/A Welded in Anchor (per anchor) $7 N/A Punch and Dimple Only (per prep) $4 N/A Deduct for omit Drywall Compression Anchor (per frame) $6 N/A Embossed Hole - 3/16” in face for (#10 Bugle Head Screw) Apprx 3/4” from bottom No charge N/A 3/8” x 5” Sleeve Anchor (each) (sold separately) $6 N/A
For loose anchors refer to frame partsFrames up to 7’0 quantity of anchors - 6 (max 8 3/4” depth)
Frames over 7’0 thru 10’0 quantity of anchors - 8 (max 8 3/4” depth)Frames over 8 3/4” depth receive double anchor quantity
Frame Construction FRAME DOOR
Mark Numbers No charge No chargeUnit Bundle (3PC) $7 N/A Unit Bundle (Elevation) $19 N/A Standard Face Weld (3PC) $86 N/A Full Profile Weld (3PC) $141 N/A
Frame Profile Options FRAME DOOR
No Returns No charge N/A Equal Rabbet - std. Unequal Rbt. (add waived at 10 units) No charge N/A Cased Open No charge N/A Single Rabbet (add waived at 10 units) $43 N/A 4" Face Heads (Sgl or Dbl) $48 N/A Non Standard Face - per Frame (1" - 3 7/8" Uniform) (add waived at 10 units) $102 N/A Non Standard Rabbet - per frame (add waived at 10 units) $98 N/A Drywall (Second) Return (1/2") (both sides) $70 N/A Kerf (includes weather-stripping) $141 N/A Non Standard Returns (uniform) $70 N/A Nailer Flange (per frame / both faces) $61 N/A Casement ready (MN Series - nailer holes) per frame $66 N/A
Effective April 4, 2020
83
EngineeringGlass Kit Options
Vision / NarrowLite
up to 100 inch2
Half Glass over 100 inch2 up to 800 inch2
Full Glass over 800 inch2
Cutout with Kit Installed $183 $271 N/A Cutout with Kit and Reinforcement $347 $435 $502 Republic Integral “Flush” Kit (not available on 20 gage doors) $602 $690 $760 Sunburst Kit (1/2” glass included) $441 N/A N/A Muntin Bar (each) $118 $118 $118 Galvanized Kit Add $118 $118 $118 Glass Pocket Add (other than 1/4”) $183 $183 $183 Hurricane Approved Insert Air Louver VLFIGHRC or VLFEZHRC (Add to above)
$1,817 $1,817 $1,817
Fire Rated Hurricane $2,442 $2,442 $2,442 NOTE: Prices based on Republic standard lite kit (No glass unless noted otherwise)
Bullet Resistant Options (see Specialty Section)
Cutout only Options (Glass Kits & Louvers)
Up to 100 inch2
Over 100 inch2 Up to 800 inch2
Over 800 inch2
Panel in Place $69 $69 N/A Cutout Only $69 $69 N/A Cutout with reinforcement $233 $233 $257 Round Cutout only (no reinf.) $256 $256 N/A
Louver Options
12” x 12” Louver Installed No Reinf $314 18” x 12” Louver Installed No Reinf $356 24” x 12” Louver Installed No Reinf $420 24” x 18” Louver Installed No Reinf $474 24” x 24” Louver Installed No Reinf $578 24” x 60” Louver Installed No Reinf $1,198 Special Size Louvers Consult Factory
Galvanized Louver Add $42 Fusible Link Louver Add $316 Insect Screen Add Consult Factory Hurricane Approved Insert/Air Louver 1500 $2,725
Note: Prices based on Republic standard louver
DOOR
FRAME DOORSpecial PackagingGeneric Door Carton (each Full Carton) packaged over std. carton N/A $46 Crating - special materials, sizes, etc. Consult Factory
Effective April 4, 2020
84
Engin
eerin
g
Republic Doors and Frames
155 Republic Drive • McKenzie, Tennessee 38201 • (731) 352-3383
HURRICANE/WINDSTORM RESISTANT PRODUCTS
ASTM E330, ASTM E1886 AND ASTM E1996
(NON - HVHZ APPROVED)
Republic offers a wide variety of hurricane tested and certified door and frame products both as components and as
complete assemblies. The following charts depict the Republic products tested along with the size and hardware
configurations approved by the State of Florida for coastal areas subject to windstorms/hurricane force winds and debris.
Revised 8/15
TECHNICAL DATA
SHEET NO. 106
Poly = Polystyrene or Polyurethane
HC = Honeycomb
SS = Steel Stiffened
*Gage SDI Level
18 Level 2
16 Level 3
14 Level 4
����� ������������� ����� ���������� ������� ������������ ��� ���������� �������
����
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ��������
�� �������
��� �����
������
������ �����
���� ��
�������� �
�������������������
����
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
����������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
����
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
������ ���
������ �������
������������
��������������
����������
����
��� ����
����
����������� �
� ����������
�������
��������
���������������
������� ����������������
�����
�� �����������
����������������
�����������
������������
����� �����
��������������
���������
������ ���
������ �����������������������
�� ����
��� ������ ��
�� ����
������
���������
����
���� ����� ��������
Pa
ir
Sin
gle
Republic Doors and Frames
155 Republic Drive • McKenzie, Tennessee 38201 • (731) 352-3383
HURRICANE/WINDSTORM RESISTANT PRODUCTS
ASTM E330, ASTM E1886 AND ASTM E1996
(NON - HVHZ APPROVED)
Republic offers a wide variety of hurricane tested and certified door and frame products both as components and as
complete assemblies. The following charts depict the Republic products tested along with the size and hardware
configurations approved by the State of Florida for coastal areas subject to windstorms/hurricane force winds and debris.
Revised 8/15
TECHNICAL DATA
SHEET NO. 106
Poly = Polystyrene or Polyurethane
HC = Honeycomb
SS = Steel Stiffened
*Gage SDI Level
18 Level 2
16 Level 3
14 Level 4
����� ������������� ����� ���������� ������� ������������ ��� ���������� �������
����
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ��������
�� �������
��� �����
������
������ �����
���� ��
�������� �
�������������������
����
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
����������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
����
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
������ ���
������ �������
������������
��������������
����������
����
��� ����
����
����������� �
� ����������
�������
��������
���������������
������� ����������������
�����
�� �����������
����������������
�����������
������������
����� �����
��������������
���������
������ ���
������ �����������������������
�� ����
��� ������ ��
�� ����
������
���������
����
���� ����� ��������
Pa
ir
Sin
gle
Republic Doors and Frames
155 Republic Drive • McKenzie, Tennessee 38201 • (731) 352-3383
HURRICANE/WINDSTORM RESISTANT PRODUCTS
ASTM E330, ASTM E1886 AND ASTM E1996
(NON - HVHZ APPROVED)
Republic offers a wide variety of hurricane tested and certified door and frame products both as components and as
complete assemblies. The following charts depict the Republic products tested along with the size and hardware
configurations approved by the State of Florida for coastal areas subject to windstorms/hurricane force winds and debris.
Revised 8/15
TECHNICAL DATA
SHEET NO. 106
Poly = Polystyrene or Polyurethane
HC = Honeycomb
SS = Steel Stiffened
*Gage SDI Level
18 Level 2
16 Level 3
14 Level 4
����� ������������� ����� ���������� ������� ������������ ��� ���������� �������
����
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ��������
�� �������
��� �����
������
������ �����
���� ��
�������� �
�������������������
����
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
����������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
����
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
������ ���
������ �������
������������
��������������
����������
����
��� ����
����
����������� �
� ����������
�������
��������
���������������
������� ����������������
�����
�� �����������
����������������
�����������
������������
����� �����
��������������
���������
������ ���
������ �����������������������
�� ����
��� ������ ��
�� ����
������
���������
����
���� ����� ��������
Pa
ir
Sin
gle
Effective April 4, 2020
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGECONSTRUCTION DESIGN - CORE
18
DL
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
4080 X X X X
8080 XX XX X X X
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGE DESIGN - CORE
+/- 114 DL
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
4080 X X X X
8080 XX XX X X X
3070* X
HURRICANE / WINDSTORM SYSTEMSREPUBLIC DOORS & FRAMES TECHNICAL DATA
SHEET No. 106AMinimum jamb depth 5-3/4"Minimum face 2"Minimum face sill section 2" / maximum 4"Cutouts in doors must be reinforcedNo water infiltration testing
Lite insert - Air Louver VLFIGHRCIncludes glass (exclude glazing)
Louver insert - Air Louver 1500AWith Security Grill
+/- 60 OUTSWING 16 FLUSH - HC, SS, POLY
YES - SMALL & LARGE MISSILE
Wood Substrate - 4" Max / Top - 8" Max / Btm - 18" Max OCMasonry Substrate - 4" Max / Top - 8.5" Max / Btm - 22.5" Max OC3/8"x5" ITW Red Head Dynabolt x 2" Min Embedment3/8"x5" Lag Bolt x 3" Min EmbedmentAnchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire
15868.2 RDF014
E1886.2002,E1886.2005,E1996.2006,E330.2002,
TAS 201.1994,TAS 202.1994,TAS 203.1994
12.31.2018 YES
NO FLUSH - HC, SS, POLY
Wood Substrate - 4" Max / Top - 8" Max / Btm - 18" Max OCMasonry Substrate - 4" Max / Top - 8.5" Max / Btm - 22.5" Max OC3/8"x5" ITW Red Head Dynabolt x 2" Min Embedment3/8"x5" Lag Bolt x 3" Min EmbedmentAnchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire
1815868.1 RDF012
E1886.2002, E1886.2005, E1996.2006, E330.2002
12.21.2018 YES - SMALL & LARGE MISSILE
+/- 60OUTSWING 16
* 3070 Single Opening Applies to +/- 114 PSF RatingHURRICANE / WINDSTORM SYSTEMS
REPUBLIC DOORS & FRAMES TECHNICAL DATASHEET No. 106A
Minimum jamb depth 5-3/4"Minimum face 2"Minimum face sill section 2" / maximum 4"Cutouts in doors must be reinforcedNo water infiltration testing
Lite insert - Air Louver VLFIGHRCIncludes glass (exclude glazing)
Louver insert - Air Louver 1500AWith Security Grill
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGE DESIGN - CORE
16
DL
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
3070 X X X
6070 XX XX X X
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGE DESIGN - CORE
16
DL
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
4080 X X X
8080 XX XX X X
15869.1 RDF006TAS 201,TAS 202, TAS 203
12.31.2019 +/- 75 OUTSWING 16 GLAZED* - HC, PS
Masonry Substrate - 4" Max / Top - 8.5" Max / Btm - 26" Max OC / (4) locsWood Substrate - 4" Max / Top - 8" Max / Btm - 15.5" Max OC / (7) locs
YES - SMALL & LARGE MISSILE
Anchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire3/8"x5" Lag Bolt x 3" Min Embedment3/8"x5" ITW Red Head Dynabolt x 2" Min Embedment
*Maximum 24.00" x 54.00" Exposed Glass
YES
15869.2 RDF010TAS 201,TAS 202,TAS 203
12.31.2019 YES FLUSH - HC, SS, POLY
YES - SMALL & LARGE MISSILE +/- 70 OUTSWING 16
Anchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire3/8"x5" Lag Bolt x 3" Min Embedment3/8"x5" ITW Red Head Dynabolt x 2" Min EmbedmentMasonry Substrate - 4" Max / Top - 8.5" Max / Btm - 22.5" Max OC / (5) locsWood Substrate - 4" Max / Top - 8" Max / Btm - 18" Max OC / (6) locs
85
Engineering
Republic Doors and Frames
155 Republic Drive • McKenzie, Tennessee 38201 • (731) 352-3383
HURRICANE/WINDSTORM RESISTANT PRODUCTS
ASTM E330, ASTM E1886 AND ASTM E1996
(NON - HVHZ APPROVED)
Republic offers a wide variety of hurricane tested and certified door and frame products both as components and as
complete assemblies. The following charts depict the Republic products tested along with the size and hardware
configurations approved by the State of Florida for coastal areas subject to windstorms/hurricane force winds and debris.
Revised 8/15
TECHNICAL DATA
SHEET NO. 106
Poly = Polystyrene or Polyurethane
HC = Honeycomb
SS = Steel Stiffened
*Gage SDI Level
18 Level 2
16 Level 3
14 Level 4
����� ������������� ����� ���������� ������� ������������ ��� ���������� �������
����
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ��������
�� �������
��� �����
������
������ �����
���� ��
�������� �
�������������������
����
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
����������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
����
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
������ ���
������ �������
������������
��������������
����������
����
��� ����
����
����������� �
� ����������
�������
��������
���������������
������� ����������������
�����
�� �����������
����������������
�����������
������������
����� �����
��������������
���������
������ ���
������ �����������������������
�� ����
��� ������ ��
�� ����
������
���������
����
���� ����� ��������
Pa
ir
Sin
gle
HURRICANE / WINDSTORM SYSTEMSREPUBLIC DOORS & FRAMES TECHNICAL DATA
SHEET No. 106AMinimum jamb depth 5-3/4"Minimum face 2"Minimum face sill section 2" / maximum 4"Cutouts in doors must be reinforcedNo water infiltration testing
Lite insert - Air Louver VLFIGHRCIncludes glass (exclude glazing)
Louver insert - Air Louver 1500AWith Security Grill
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGE DESIGN - CORE
16
DL
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
4080 X X X
8080 XX XX X X
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGE DESIGN - CORE
18
DL
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
4080 X X X
8080 XX X X
Wood Substrate - 4" Max / Top - 8" Max / Btm - 18" Max OC / (6) locs
Anchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire3/8"x5" Lag Bolt x 3" Min Embedment3/8"x5" ITW Red Head Dynabolt x 2" Min EmbedmentMasonry Substrate - 4" Max / Top - 8.5" Max / Btm - 22.5" Max OC / (5) locs
15869.3 RDF011TAS 201,TAS 202,TAS 203
12.31.2019 YES
15870.1 RDF009ASTM E1886
E1996 E330
12.31.2018 NOELEVATIONGLAZED -
HC, SS, STY
+/- 60 OUTSWING 16 LOUVER - HC, POLY
Anchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire3/8"x5" Lag Bolt x 3" Min Embedment3/8"x5" ITW Red Head Dynabolt x 2" Min EmbedmentMasonry Substrate - 4" Max / Top - 8.5" Max / Btm - 22.5" Max OC / (5) locsWood Substrate - 4" Max / Top - 8" Max / Btm - 18" Max OC / (6) locs
YES - SMALL & LARGE MISSILE +/- 50 OUTSWING 16
YES - SMALL & LARGE MISSILE
HURRICANE / WINDSTORM SYSTEMSREPUBLIC DOORS & FRAMES TECHNICAL DATA
SHEET No. 106AMinimum jamb depth 5-3/4"Minimum face 2"Minimum face sill section 2" / maximum 4"Cutouts in doors must be reinforcedNo water infiltration testing
Lite insert - Air Louver VLFIGHRCIncludes glass (exclude glazing)
Louver insert - Air Louver 1500AWith Security Grill
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGE DESIGN - CORE
18
DL
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
3070 X X X
LISTING NO DWG NO STDS EXP HVHZ IMPACT PSF SWING MIN FR GAGE MIN DR GAGE DESIGN - CORE
18
DP
MAX SIZE SGL MAX SIZE DBL SURF VRODSURF VROD x SURF BOLT &
ASTRIM ED RIM x RIM
W/HDWE MULL GRADE 1 CYL LK GRADE 1 OR 2 CYL LK W/DLK
GRADE 1 OR 2 CYL LK W/DLK SURF BOLTS &
AST
GRADE 1 MORT LK W/DBOLT
FUNC
GRADE 1 MORT LK W/DBOLT FUNC
SURF BOLTS & AST
3080 X X X
15871.1 RDF013
E1886.2002,E1886.2005,E1996.2006,E330.2002,
TAS 201.1994,TAS 202.1994,TAS 203.1994
12.31.2018
Anchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire3/8"x5" Lag Bolt x 3" Min Embedment3/8"x5" ITW Red Head Dynabolt x 2" Min EmbedmentMasonry Substrate - 4" Max / Top - 8.5" Max / Btm - 22.5" Max OC / (4) locsWood Substrate - 4" Max / Top - 8" Max / Btm - 18" Max OC / (5) locs
YES - SMALL & LARGE MISSILE
12/31/2018 YES YES - SMALL & LARGE MISSILE +/- 70 BOTH 16
+/- 80 BOTH 16 FLUSH / EMBOSSED - HC, STY
Anchors - POA (Sleeve Anchor Bolt x Mas) (3/8"x5" Lag Bolt (wood screw)), Twist In POA, Wire3/8"x5" Lag Bolt x 3" Min Embedment3/8"x5" ITW Red Head Dynabolt x 2" Min EmbedmentMasonry Substrate - 4" Max / Top - 8.5" Max / Btm - 39" Max OC / (3) locsWood Substrate - 4" Max / Top - 8" Max / Btm - 26" Max OC / (4) locs
FLUSH / EMBOSSED - HC, STY15871.R2
YES
RDF015
E1886.2002,E1886.2005,E1996.2006,E330.2002,
TAS 201.1994,TAS 202.1994,TAS 203.1994
Republic Doors and Frames
155 Republic Drive • McKenzie, Tennessee 38201 • (731) 352-3383
HURRICANE/WINDSTORM RESISTANT PRODUCTS
ASTM E330, ASTM E1886 AND ASTM E1996
(NON - HVHZ APPROVED)
Republic offers a wide variety of hurricane tested and certified door and frame products both as components and as
complete assemblies. The following charts depict the Republic products tested along with the size and hardware
configurations approved by the State of Florida for coastal areas subject to windstorms/hurricane force winds and debris.
Revised 8/15
TECHNICAL DATA
SHEET NO. 106
Poly = Polystyrene or Polyurethane
HC = Honeycomb
SS = Steel Stiffened
*Gage SDI Level
18 Level 2
16 Level 3
14 Level 4
����� ������������� ����� ���������� ������� ������������ ��� ���������� �������
����
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������� ������� ����������� ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ��������
�� �������
��� �����
������
������ �����
���� ��
�������� �
�������������������
����
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
����������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������������ �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
��������
������������������
����� �����
��������������
���
������ ������� ������������ ����
������
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
������������������
����� �����
��������������
������ ���
������ ������� ������������ ����
���������� �
�������� ������������
��������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
�����������������������
���������
����� �����
��������������
������ ���
������ ������� ������������ ����
����
��������������
�����������
��������
���������������
������� ����������������
�����������
�� �����������
����������������
�����������
������������
����� �����
��������������
������������������
������ ���
������ �������
������������
��������������
����������
����
��� ����
����
����������� �
� ����������
�������
��������
���������������
������� ����������������
�����
�� �����������
����������������
�����������
������������
����� �����
��������������
���������
������ ���
������ �����������������������
�� ����
��� ������ ��
�� ����
������
���������
����
���� ����� ��������
Pa
ir
Sin
gle
Effective April 4, 2020
86
87
Valu-PacDP Valu-Pac Doors - 418
418 CRS /HC CRDescription Qty Weight 20
3068 F CH CR LH 20 1900 $10,314 3068 F CH CR RH 20 1900 $10,314 3068 F MOL CR LH 20 1900 $10,314
3068 F MOL CR RH 20 1900 $10,314 3070 F CH CR LH 20 1980 $10,647 3070 F CH CR RH 20 1980 $10,647 3070 F MOL CR LH 20 1980 $10,647 3070 F MOL CR RH 20 1980 $10,647 3070 F DT CR LH 20 1980 $10,647 3070 F DT CR RH 20 1980 $10,647 3070 F OL CR LH 20 1980 $10,647 3070 F OL CR RH 20 1980 $10,647 3670 F CH CR LH 20 2320 $12,494 3670 F CH CR RH 20 2320 $12,494 4070 F CH CR LH 20 2640 $13,491 4070 F CH CR RH 20 2640 $13,491
418 CRS / HC NO CRDescription Qty Weight 20
3068 F CH LH 20 1740 $9,757 3068 F CH RH 20 1740 $9,757 3070 F CH LH 20 1820 $10,088 3070 F CH RH 20 1820 $10,088
418 CRS / INSUL (STY) CRDescription Qty Weight 20
3068 F CH CR LH INS* 20 1960 $11,144 3068 F CH CR RH INS* 20 1960 $11,144 3070 F CH CR LH INS* 20 2120 $11,456 3070 F CH CR RH INS* 20 2120 $11,456 3070 F MOL CR LH INS* 20 2120 $11,456 3070 F MOL CR RH INS* 20 2120 $11,456
418 CRS / INSUL (STY) NO CRDescription Qty Weight 20
3068 F CH LH INS* 20 1800 $10,605 3068 F CH RH INS* 20 1800 $10,605 3070 F CH LH INS* 20 1960 $10,916 3070 F CH RH INS* 20 1960 $10,916 3070 F MOL LH INS* 20 1960 $10,916 3070 F MOL RH INS* 20 1960 $10,916
NOTES: Discounts apply only to wholeValu-Pac Units of (20) Pallets of (10) Left and (10) Right of the same door count as a (20) door Valu-Pac Unit Broken pallets quanties will be at full list price. Valu-Pac discount pricing not eligible for any other additional pricing discounts. For consideration of additional size or product options, please contact the factory. Fire-Rated to 3 Hours UL and ITS Limited
Effective April 4, 2020
88
Valu-
Pac
Effective April 4, 2020
420 CRS / HC CRDescription Qty Weight 20
3068 F CH CR LH 20 1600 $9,090 3068 F CH CR RH 20 1600 $9,090 3070 F CH CR LH 20 1640 $9,463 3070 F CH CR RH 20 1640 $9,463
420 CRS / HC NO CRDescription Qty Weight 20
3068 F CH LH 20 1440 $8,553 3068 F CH RH 20 1440 $8,553 3070 F CH LH 20 1500 $8,906 3070 F CH RH 20 1500 $8,906
420 CRS / INSUL (STY) CRDescription Qty Weight 20
3068 F CH CR LH INS 20 1660 $9,920 3068 F CH CR RH INS 20 1660 $9,920 3070 F CH CR LH INS 20 1720 $10,272 3070 F CH CR RH INS 20 1720 $10,272
420 CRS / INSUL (STY) NO CRDescription Qty Weight 20
3068 F CH LH INS 20 1500 $9,362 3068 F CH RH INS 20 1500 $9,362 3070 F CH LH INS 20 1560 $9,715 3070 F CH RH INS 20 1560 $9,715
NOTES: Discounts apply only to wholeValu-Pac Units of (20) Pallets of (10) Left and (10) Right of the same door count as a (20) door Valu-Pac Unit Broken pallets quanties will be at full list price. Valu-Pac discount pricing not eligible for any other additional pricing discounts. For consideration of additional size or product options, please contact the factory. Fire-Rated to 3 Hours UL and ITS Limited
DP Valu-Pac Doors - 420
89
Valu-PacDP Valu-Pac Doors - 418 - Galvanized
418 GALV / HC - CRDescription Qty Weight 20
3068 F CH CR LH GLV 20 1900 $11,181 3068 F CH CR RH GLV 20 1900 $11,181 3068 F MOL CR LH GLV 20 1900 $11,181
3068 F MOL CR RH GLV 20 1900 $11,181 3070 F CH CR LH GLV 20 1980 $11,514 3070 F CH CR RH GLV 20 1980 $11,514 3070 F MOL CR LH GLV 20 1980 $11,514 3070 F MOL CR RH GLV 20 1980 $11,514 3070 F DT CR LH GLV 20 1980 $11,514 3070 F DT CR RH GLV 20 1980 $11,514 3070 F OL CR LH GLV 20 1980 $11,514 3070 F OL CR RH GLV 20 1980 $11,514 3670 F CH CR LH GLV 20 2320 $13,361 3670 F CH CR RH GLV 20 2320 $13,361 4070 F CH CR LH GLV 20 2640 $14,358 4070 F CH CR RH GLV 20 2640 $14,358
418 GALV / HC - NO CRDescription Qty Weight 20
3068 F CH LH GLV 20 1740 $10,624 3068 F CH RH GLV 20 1740 $10,624 3070 F CH LH GLV 20 1820 $10,956 3070 F CH RH GLV 20 1820 $10,956
418 GALV / INSUL (STY) - CRDescription Qty Weight 20
3068 F CH CR LH GLV INS* 20 1960 $12,012 3068 F CH CR RH GLV INS* 20 1960 $12,012 3070 F CH CR LH GLV INS* 20 2120 $12,323 3070 F CH CR RH GLV INS* 20 2120 $12,323 3070 F MOL CR LH GLV INS* 20 2120 $12,323 3070 F MOL CR RH INS* 20 2120 $12,323
418 GALV / INSUL (STY) - NO CRDescription Qty Weight 20
3068 F CH LH GLV INS* 20 1800 $11,454 3068 F CH RH GLV INS* 20 1800 $11,454 3070 F CH LH GLV INS* 20 1960 $11,766 3070 F CH RH GLV INS* 20 1960 $11,766 3070 F MOL LH GLV INS* 20 1960 $11,766 3070 F MOL RH GLV INS* 20 1960 $11,766
NOTES: Discounts apply only to wholeValu-Pac Units of (20) Pallets of (10) Left and (10) Right of the same door count as a (20) door Valu-Pac Unit
Broken pallets quanties will be at full list price. Valu-Pac discount pricing not eligible for any other additional pricing discounts. For consideration of additional size or product options, please contact the factory. Fire-Rated to 3 Hours UL and ITS Limited
Effective April 4, 2020
90
Valu-
Pac
Effective April 4, 2020
420 GALV / HC - CRDescription Qty Weight 20
3068 F CH CR LH GLV 20 1600 $9,368 3068 F CH CR RH GLV 20 1600 $9,368 3070 F CH CR LH GLV 20 1640 $9,734 3070 F CH CR RH GLV 20 1640 $9,734
420 GALV / HC - NO CRDescription Qty Weight 20
3068 F CH LH GLV 20 1440 $8,824 3068 F CH RH GLV 20 1440 $8,824 3070 F CH LH GLV 20 1500 $9,190 3070 F CH RH GLV 20 1500 $9,190
420 GALV / INSUL (STY) - CRDescription Qty Weight 20
3068 F CH CR LH GLV INS 20 1660 $10,169 3068 F CH CR RH GLV INS 20 1660 $10,169 3070 F CH CR LH GLV INS 20 1720 $10,534 3070 F CH CR RH GLV INS 20 1720 $10,534
420 GALV / INSUL (STY) - NO CRDescription Qty Weight 20
3068 F CH LH GLV INS 20 1500 $9,625 3068 F CH RH GLV INS 20 1500 $9,625 3070 F CH LH GLV INS 20 1560 $9,990 3070 F CH RH GLV INS 20 1560 $9,990
NOTES: Discounts apply only to wholeValu-Pac Units of (20) Pallets of (10) Left and (10) Right of the same door count as a (20) door Valu-Pac Unit Broken pallets quanties will be at full list price. Valu-Pac discount pricing not eligible for any other additional pricing discounts. For consideration of additional size or product options, please contact the factory. Fire-Rated to 3 Hours UL and ITS Limited
DP Valu-Pac Doors - 420 - Galvanized
91
Valu-PacUNIVERSAL FRAME COMPONENTS
Discounting Applies to the Total Number of Frame ValuPac Units Purchased
MEDescription Qty Weight 1-5 6-10 11-15 16-20 >20
68 534 PR LH 26 778 $4,867 $4,769 $4,614 $4,360 $4,056 68 534 PR RH 26 778 $4,867 $4,769 $4,614 $4,360 $4,056 70 534 PR LH 26 804 $5,092 $4,986 $4,827 $4,561 $4,243 70 534 PR RH 26 804 $5,092 $4,986 $4,827 $4,561 $4,243 30 534 HD 52 375 $2,596 $2,542 $2,461 $2,325 $2,163 30 534 HD 4” 28 289 $2,688 $2,688 $2,548 $2,408 $2,240
68 734 RH LH 26 910 $5,541 $5,426 $5,253 $4,964 $4,618 68 734 PR RH 26 910 $5,541 $5,426 $5,253 $4,964 $4,618 70 734 PR LH 26 988 $5,916 $5,792 $5,607 $5,299 $4,930 70 734 PR RH 26 988 $5,916 $5,792 $5,607 $5,299 $4,930 30 734 HD 52 520 $2,895 $2,835 $2,745 $2,594 $2,413
68 814 PR LH 26 962 $6,065 $5,939 $5,749 $5,433 $5,054 68 814 PR RH 26 962 $6,065 $5,939 $5,749 $5,433 $5,054 70 814 PR LH 26 1014 $6,340 $6,208 $6,010 $5,679 $5,283 70 814 PR RH 26 1014 $6,340 $6,208 $6,010 $5,679 $5,283 30 814 HD 52 520 $3,395 $3,324 $3,218 $3,041 $2,829
68 834 PR LH 26 1014 $6,065 $5,939 $5,749 $5,433 $5,054 68 834 PR RH 26 1014 $6,065 $5,939 $5,749 $5,433 $5,054 70 834 PR LH 26 1040 $6,340 $6,208 $6,010 $5,679 $5,283 70 834 PR RH 26 1040 $6,340 $6,208 $6,010 $5,679 $5,283 30 834 HD 52 520 $3,395 $3,324 $3,218 $3,041 $2,829
WeldedDescription Qty Weight 1-5 6-10 11-15 16-20 >20
3070 534 LH HD 26 1092 $9,060 $8,872 $8,589 $8,117 $7,550 3070 534 RH HD 26 1092 $9,060 $8,872 $8,589 $8,117 $7,550 3070 534 LH 4HD 26 1144 $10,259 $10,259 $9,724 $9,190 $8,549 3070 534 RH 4HD 26 1144 $10,259 $10,259 $9,724 $9,190 $8,549
Sticks and MullionsDescription Qty Weight 1-5 6-10 11-15 16-20 >20
10’3” 534 BJ 39 925 $5,541 $5,426 $5,252 $4,964 $4,618 10’3” 534 BM 24 812 $7,718 $7,558 $7,316 $6,914 $6,432
NOTES: Discounts apply only to multiples of Valu-Pac units. Broken pallets quanties will be at full list price. Valu-Pac discount pricing not eligible for any other additional special pricing discounts. For consideration of additional size or product options, please contact the factory.
Effective April 4, 2020
92
Valu-
Pac
DRYWALL FRAME COMPONENTS
Discounting Applies to the Total Number of Frame ValuPac Units Purchased
MHDescription Qty Weight 1-5 6-10 11-15 16-20 >20
68 558 PR LH 26 780 $5,466 $5,352 $5,182 $4,897 $4,555 68 558 PR RH 26 780 $5,466 $5,352 $5,182 $4,897 $4,555 70 558 PR LH 26 832 $5,691 $5,572 $5,394 $5,098 $4,742 70 558 PR RH 26 832 $5,691 $5,572 $5,394 $5,098 $4,742 30 558 HD 52 364 $2,696 $2,640 $2,555 $2,415 $2,246
68 578 PR LH 26 806 $5,466 $5,352 $5,182 $4,897 $4,555 68 578 PR RH 26 806 $5,466 $5,352 $5,182 $4,897 $4,555 70 578 PR LH 26 858 $5,691 $5,572 $5,394 $5,098 $4,742 70 578 PR RH 26 858 $5,691 $5,572 $5,394 $5,098 $4,742 30 578 HD 52 416 $2,696 $2,640 $2,555 $2,415 $2,246
70 828 PR LH 26 1014 $6,939 $6,794 $6,577 $6,216 $5,782 70 828 PR RH 26 1014 $6,939 $6,794 $6,577 $6,216 $5,782 30 828 HD 52 468 $3,744 $3,666 $3,549 $3,354 $3,120
NOTES: Discounts apply only to multiples of Valu-Pac units. Broken pallets quanties will be at full list price. Valu-Pac discount pricing not eligible for any other additional special pricing discounts. For consideration of additional size or product options, please contact the factory.
Effective April 4, 2020
93
Door PartsDOOR PARTS
HINGE PREPARATIONS
Part Desc Pkg Qty List Each
3980920 Uni-Fit 4 1/2" Hinge Shim Heavy Wt. to Standard Wt. 1 Shim $2.35
3980921 Uni-Fit 5" Hinge Shim Heavy Wt. to Standard Wt. 1 Shim $2.35
3981752 Hinge Filler 1 3/4”4 1/2” Hinge (Handing Plate) 100 $1.05
3980316 Hinge Filler 1 3/4" 5.0" Hinge (Handing Plate) 100 $1.05
38300011 3/4" Hinge Filler
4 1/2" Hinge110FHMS #12/24
50 Filler Plates 110 FHMS #12/24 $6.55
CYLINDRICAL LOCK PREPARATIONS
Part Desc List Each
3831013 1 3/4" Split Ring CH Lock Reinforcement $16.55
3980641 Drive-In Dead Bolt Sleeve $2.35
3831015 Cylindrical Lock Filler $19.75
3831004 CH (161) Lock Edge Filler110 FHMS #8/32 $8.20
3980706 Cylindrical Lock Punchout CH (Gov't 10 - 161) $2.35
3980309 Cylindrical Deadlock Tap Plate $7.35
Effective April 4, 2020
94
Door
Parts MORTISE LOCK PREPARATIONS
Part Desc List Each
3980000 Mortise Strike Adaptor2 FHMS #12/24 $7.05
3980300 MOL (86) Edge Adaptor2 FHMS #12/24 $28.40
3980301 MOL (86) Lock Edge Filler2 FHMS #12/24 $14.70
3980707 Mortise Lock Punchout Govt. 86 $2.35
3980310Mortise Deadlock
Tap Plate 10 -24 Tap .187 offset
$7.70
MISCELLANEOUS TAP PLATES
Part Desc List Each
3980302Concealed Vertical Rod
Guide Tap Plate 10 -32 Tap
$7.15
3980219Flush Bolt Tap Plate
Used with an Astragal 8 -32 Tap .085 offset
$6.95
3980220Flush Bolt Tap Plate
Used without an Astragal 8 -32 Tap .085 offset
$6.95
3980311Auto Flush Bolt
Top & Bottom Tap Plate 8 -32 Tap
$6.30
Effective April 4, 2020
95
Door PartsDOOR EDGE CHANNELS
Part Desc List Each
390851116 Gage Door
Modification Channel 8'0"
$41
3986339 16 Gage Blank Channel 1 3/4" 8'0" $24
Type 4 CY Louver (Non-Labeled)
(approx 30% Free Air)
3981042 12" x 12" $180
3981043 18" x 12" $215
3981044 24" x 12" $249
3981045 24" x 18" $313
3981046 24" x 24" $376
Effective April 4, 2020
96
Door
Parts ASTRAGALS
Part Desc Includes List Each
3801276 68 4 RHStandard "Z" Type Astragal
For inactive Leaf Prepared for 4 7/8" Strike
Embossed Reinforcements 1 "Z" Astragal
#8 x 1" PHIL OVAL HD S.D.S
$77
3801277 68 4 LH $77
3801278 70 4 RH $77
3801279 70 4 LH $77
3801286 80 4 RH $77
3801287 80 4 LH $77
3801290 68 4 RH Standard "Z" Type Astragal For inactive Leaf
Prepared for 4 7/8" Strike Flush Bolts
Embossed Reinforcements 1 "Z" Astragal
#8 x 1" PHIL OVAL HD S.D.S
$106
3801291 68 4 LH $106
3801292 70 4 RH $106
3801293 70 4 LH $106
3801300 80 4 RH $110
3801301 80 4 LH $110
3199908 68 4 RH Standard "Z" Type Astragal For inactive Leaf
CH, M or MOL Lock Provision 4 7/8" Strike Standard
1 "Z" Astragal 1- 3980000 Mort Str Adaptor
2 - 12-24 x 1/2" FHMS #8 x 1" PHIL OVAL HD S.D.S
$77
3199909 68 4 LH $77
3199910 70 4 RH $77
3199911 70 4 LH $77
3199914 80 4 RH $77
3199915 80 4 LH $77
3199916 68 4 RH Flush Bolt "Z" Type Astragal For inactive Leaf
CH, M or MOL Lock Provision 4 7/8" Strike Standard
1 "Z" Flush Bolt Astragal 1- 3980000 Mort Str Adaptor
2 - 12-24 x 1/2" FHMS #8 x 1" PHIL OVAL HD S.D.S
$98
3199917 68 4 LH $98
3199918 70 4 RH $98
3199919 70 4 LH $98
3199942 8' 0"
Blank Astragal For Active or Inactive Leaf
1 "Z" Astragal Blank #8 x 1" PHIL OVAL HD S.D.S
Top of Astragal must be notched
after height and hand is determined
$46
3199963 10' 0" $55
3199949 8'0" Flat Bar Astragal $46
3199950 10'0" Flat Bar Astragal $55
Galvanized add $ 17.00 list to the above prices. Price 1 3/8 same as 1 3/4 Unless otherwise specified, flushbolts will be located 12” top and bottom.
Effective April 4, 2020Effective April 4, 2020
97
Door PartsDUTCH DOOR SHELVES
Part Desc List Each
N/A
Dutch Door Full Shelf 1 3/4" Only
Available in standard door
widths up to 4’0"
(over 4'0" consult factory)
$452
N/A
Dutch Door Half Shelf 1 3/4" Only
Available in standard door
widths up to 4’0"
(over 4'0" consult factory)
$284
PAINT
Part Desc List Each
3933981Air Dried Beige
Primer PaintOne Case (12 - 16oz cans)
$319
Effective April 4, 2020
98
Door
Parts All Metal Stamping Low Profile Model 110
Glass Kit Size Door Size Exposed Glass Catalog Number List EachVision Lite All Sizes 10" x 10" 3927102 $133 Narrow Lite All Sizes 5" x 20" 3927104 $127 Narrow Lite All Sizes 3" x 33" 3927130 $145 Narrow Lite All Widths 6'8" Ht. 6" x 29" 3927106 $158 Narrow Lite All Widths 7'0", 7'2",
7'10"", 8'0" Hts.6" x 33" 3927108 $158
Half Glass 2668 16" x 29" 3927110 $209 2868, 21068 18" x 29" 3927112 $214 3068, 3268 22" x 29" 3927114 $214
2670, 2672, 26710 16" x 33" 3927116 $204 2870, 2872, 28710,
21070, 21072, 21071018" x 33" 3927118 $217
3070, 3072, 30710, 3270, 3272, 32710
22" x 33" 3927120 $226
Full Glass 3068, 3268 22" x 59" 3927122 $326 3070, 3072, 30710 3270, 3272, 32710
22" x 63" 3927124 $338
$307.00 above listed glass kits are for 1 3/4” doors.
ORDER INFORMATION ORDER SIZE – inside dimension of frame (H + W) CUTOUT SIZE – Order Size + 1 1/2" GLASS SIZE – Order Size + 3/4"
MATERIAL • 18 gage CRS frame is standard • 33% thicker than 20 gage frames • maintains flat appearance
DIMENSIONS Standard Frame fits 1/4" glass and 1 3/4" door
NARROW FACE FRAME • better proportioned • visually appealing • suitable for wood, metal or mineral core doors
LOW PROFILE provides less interference for exit hardware
NAIL IN FASTENING METHOD: • requires only one person to install • significantly reduces installation time • corridor side is fastener free, secure and
attractive
No Glazing Compound, Tape or Intumescent is required for most label application • reduces cost • simplifies installation • improves appearance
* NOTE: For exterior applications or where glazng tape is required, kits must be ordered with additional glass pocket space.
* EXAMPLE: If 1/4” glass + 1/16” glazing tape on both sides, you must order the frame for a 3/8” glass pocket (Glass Thickness).
UL & WH LISTEDMeets UL10B requirements for NEGATIVE PRESSURE and UL10C & UBC 7-2(1997) for POSITIVE PRESSURE. Refer to AMS Listing Specifications. Fire tested WITHOUT glazing compound, tape or intumescent.
Broken-lot charge for less-than-package quantities: 50% of package list price.(Charge will be discounted at rate of overall order discount)
Special glass lite sizes available, consult factory.
Effective April 4, 2020
99
Frame PartsFRAME PARTS
HINGE PREPARATIONS
Part Desc List Each
Hinge Reinforcements
3832026 11 Gage 3 1/2 " $4.25
3HR0300A002-GL 7 gage 4 1/2” Universal $6.55
3HR0350A002-GL 7 gage 5” Universal $7.15
Hinge Cover Plate
3832033 11 Gage 3 1/2" Hinge Filler $8.55
3832034 10 Gage 4 1/2" Hinge Filler $10.50
STRIKE PREPARATIONS
Part Desc List Each
Strike Reinforcements3832031 2 3/4" Strike $3.70
3832032 4 7/8" Strike $6.45
Strike Cover Plate
3832035 2 3/4" Strike Filler $9.60
3832036 4 7/8" Strike Filler $10.20
Mortise Deadlock Tap Plate 3831101 Tap Plate $3.55
CLOSER PREPARATIONS
Part Desc List Each
Closer Reinforcement
3832008 1 3/8" x 14" x 14 Gage $5.05
3832018 1 3/8" x 14" x 12 Gage $5.60
Sleeve Closer Reinforcement
3832009 14 Gage x 14" x 4 3/4" $25.35
3832010 14 Gage x 14" x 5 3/4" $27.55
3832011 14 Gage x 14" x 6 3/4" $29.75
3832014 14 Gage x 14" x 7 3/4" $31.95
3832012 14 Gage x 14" x 8 3/4" $34.20
Effective April 4, 2020
100
Frame
Parts MORTAR GUARDS, JUNCTION BOXES
Part Desc List Each
Mortar Guard 3833008 1 3/4" $1.65
Junction Box 14” w/Knockouts 3812503 Junction Box 14" $66.15
Junction Box 8” w/Knockouts 3812504 Junction Box 8" $63.95
FLUSH BOLT STRIKE PREPARATIONS
Part Desc List Each
Reversible FB Strike 3981475 (10) Reinforcing & Strike Plates $158.70
Automatic Flush Bolt Tap Plate 3981049 Tap Plate $3.55
ANCHORS
Part List Each
4 3/4 " Masonry T Anchor 3832037 $2.20
5 3/4 " Masonry T Anchor 3832038 $2.20
6 3/4 " Masonry T Anchor 3832039 $4.35
7 3/4 " Masonry T Anchor 3832078 $4.35
8 3/4 " Masonry T Anchor 3832040 $4.35
Wire Masonry Anchor 3832043 $1.65
Adjustable Masonry Anchor Assembly 3812102/103 $5.40
4 3/4" Wood Stud Anchor 3832047 $2.95
5 3/4" Universal Wood Stud Anchor PO/ET 3933907 $2.95
6 1/4" Wood Stud Anchor 3906983 $3.25
6 3/4" Wood Stud Anchor 3832049 $3.25
7 3/4" Wood Stud Anchor 3832054 $3.25
8 1/4" Wood Stud Anchor 3902625 $3.25
8 3/4" Wood Stud Anchor 3832053 $3.25
Effective April 4, 2020Effective April 4, 2020
101
Frame Parts
4 3/4" Steel Stud Anchor 3980959 $3.25
5 3/4" Steel Stud Anchor 3980534 $3.25
6 1/4" Steel Stud Anchor 3903135 $3.25
6 3/4" Steel Stud Anchor 3980961 $3.25
7 3/4" Steel Stud Anchor 3981530 $3.30
8 1/4" Steel Stud Anchor 3903566 $3.55
8 3/4" Steel Stud Anchor 3980962 $3.70
Universal Frame Prepared Opening Anchor (Bolt not included) 3832003 $2.40
Cased Opening Prepared Anchor (Bolt not included) 3832002 $2.40
Twist-In Prepared Opening Anchor 4 3/4" - 5 3/4" 3980668 $5.10
5 3/4" Snap-In Prepared Opening Anchor with Plastic Hole Plugs 3981452 $4.50
Plastic Hole Plugs 3981451 $0.20
3/8" x 5" Sleeve Anchor 3981088 $5.05
4 3/4" to 5 5/8" One piece Sill Anchor 3832080 $3.30
5 3/4" to 6 5/8" One piec Sill Anchor 3832081 $3.30
6 3/4" to 7 5/8" One piece Sill Anchor 3832082 $3.30
7 3/4" to 8 5/8" One piece Sill Anchor 3832083 $3.30
8 3/4" to 9 5/8" One piece Sill Anchor 3832084 $3.30
Double Rabbet Sill Anchor MH & SH Frames 3812100 $1.65
Single Rabbet Sill Anchor MH & SH Frames 3812099 $1.65
Drywall Pressure Anchor 3981352 $5.05
Effective April 4, 2020
ANCHORS
Part List Each
102
Frame
Parts
Butterfly Anchor 4 1/2" to 7" 3933950 $3.25
Adjustable Wood/Steel Stud Anchor Half (6 3/4" Max) 3832045 $3.30
4 3/4" Base Anchor for Sticks 3832074 $10.00
5 3/4" Base Anchor for Sticks 3832075 $10.00
6 3/4" Base Anchor for Sticks 3832076 $10.00
8 3/4" Base Anchor for Sticks 3832077 $10.00
Double Egress Sill Anchor (each) 3399000 $4.75
Double Egress Wood Stud Anchor (each) 3399004 $3.55
Double Egress Steel Stud Jamb Anchors 3399002 $4.75
Double Egress Steel Stud Head Anchors 3399003 $3.55
5 3/4" Adjustable Sill Anchor 3934013 $11.75
Effective April 4, 2020Effective April 4, 2020
ANCHORS
Part List Each
103
Frame PartsGLAZING BEAD / STOP EXTENSION / MISC. ITEMS
Part Desc List Each
Glazing Bead 3909837 3/4" x 5/8" x 10' Pre-punch Galvanized $39.70
3/4" High Stop Extension 3934009 20 Gage 10'0" $39.70
Spreader Bar 3832022 10'0" $24.25
Head Clip for Removable Panel 3980867 Head Clip $3.55
Jamb Clip for Removable Panel 3980868 Jamb Clip $3.55
Self Sticking Door Mutes 3842021 Mutes $0.20
Mutes 3904409 Mutes $0.50
Drywall Hole Plugs 3812101 Plugs $0.50
Mullion Clip 3832064 Clips $12.15
Splice Channel
3832060 4 3/4" $9.40
3832061 5 3/4" $9.40
3832062 6 3/4" $9.40
3832063 8 3/4" $9.40
Full Length 12 Gage Channel 3980677 5 3/4" x 6' $189.55
Hospital Stop Kit
3811115 4 3/4" $16.55
3811116 5 3/4" $16.55
3811117 6 3/4" $19.85
3926423 7 3/4" $19.85
3811118 8 3/4" $19.85
Effective April 4, 2020
104
Frame
Parts SCREWS
Part List Each
#8 - 32 x 1/2 U.C. FHMS (Phillips Flat Head Undercut Machine Screw Zinc Plated)
3980324 $0.15
CH-Lock Front Cover Plate
2 3/4" Strike Cover Plate Special Strikes
#12 - 24 x 1/2 U.C. FHMS (Flat Head Undercut Machine Screw) 3980327 $0.15
Door and Frame Hing Cover Plates - 4 1/2"
MOL Lock Face Cover Plate
#6 x 1/2 OHDS (Oval Head) 3980556 $0.25 Labels
#8 x 3/8 Type A Binding HD STS (Self Tapping Screw) 3831089 $0.15 Aluminum and Steel-Stick
Glazing Bead Clips
#10 - 24 x 1/2 U.C. FHMS (Flat Head Machine Screw) 3980626 $0.15
Door and Frame Hinge Cover Plates
3 1/2"
#8 x 3/8 Phil Type B FHSTS (Flat Head Self Tapping Screw) 3710000 $0.20 Steel Muntin Bar Clips
Steel Muntin Bar Sets
#8 - 1 OH Phil Tek Z Zinc (Oval Head) 3911094 $0.25 Astragals and
UL Glazing Bead
#8 x 1 1/4 Phil OH SDS (Oval Head Self Drilling Screw) 3911093 $0.30 Glazing Bead
#20 x 5" Wood Screw 3981565 $2.10 Non-Labeled Wood Stud
Applications with Prepared Openings
Broken-lot charge for less-than-package quantities: 50% of package list price. (Charge will be discounted at rate of overall order discount)
Effective April 4, 2020
105
HardwareHARDWARE
CLOSERS, HINGES AND EXIT DEVICES
Part Description Catalog Number List Each
Tri-pack Closer- Heavy duty, 48" Wide Interior or 36" Wide Exterior Door, Aluminum with Back Check
3727006 $322
Tri-pack Closer- Medium duty, 48" Wide Interior or 36" Wide Exterior Door, Aluminum with Back Check
3727007 $192
Closer Cover 3720287 $23
4.5" x 4.5" Ball Bearing Hinges - USP NRP Hinges (each) 3727503 $14
4.5" x 4.5" Ball Bearing Hinges - 26D NRP Hinges (each) 3727502 $16
4.5" x 4.5" Ball Bearing Hinges - 26D Hinges (each) 3727501 $12
4.5" x 4.5" Plain Hinges - USP Hinges (each) 3727505 $5
4.5" x 4.5" Plain Hinges - 26D Hinges (each) 3727504 $8
Continuous Hinge - 7 Ft. Aluminum Full Mortise Hinge 3720070 $392
Continuous Hinge - 7 Ft. Aluminum Full Surface Hinge 3720071 $590
Rim, Reversible Exit Device - Aluminum Finish Adjustable for Doors 25" - 36" Wide 3720470 $285
Entry Lever Trim - Lever Trim with Clutch Solid Tailpiece 3720017 $249
DOOR PLATES, STOPS, BOLTS, SWEEPS AND LOCKSETS
Part Description Catalog Number List Each
Pull Plate - 3 1/2" x 15" Aluminum 3908272 $42
Push Plate - 3 1/2" x 15" Aluminum 3908271 $13
Low Dome Door Stop Dull Chrome Finish 3720024 $13
Effective April 4, 2020
106
Hardw
are DOOR PLATES, STOPS, BOLTS, SWEEPS AND LOCKSETS
Part Description Catalog Number List Each
Flush Bolt - U.L. Listed, 1" x 6 3/4" Dull Chrome (each) 3720331 $13
Heavy Duty U.L. Surface Bolt - Zinc Plated with Exposed Screws 3720336 $70
36" Sweep 3720026 $45
48" Sweep 3720027 $35
$35
Entry Lock Boxed - Dull Chrome Keyed Different 3720170 $47
Storeroom Lock Boxed - Dull Chrome 3720019 $203
Privacy Locked Boxed - Dull Chrome - Grade 2(F76) 3727003 $203
Passage Set Boxed - Dull Chrome 3720021 $112
Heavy Duty Single Cylinder Deadbolt with Solid Bar Construction - Stainless Steel 3720149 $185
Kick Plate - Stainless Steel, Satin Finish, 8" x 34" 3720022 $65
Kick Plate - Stainless Steel, Satin Finish, 10" x 34" 3720023 $78
Saddle Threshold - 1/2" x 5" x 36" x AL (U.L. and ADA) 3720028 $98
Saddle Threshold - 1/2" x 5" x 72" x AL (U.L. and ADA) 3720029 $83
Lipped Threshold - 5/8” x 5” 36” x AL (U.L.) 3720030 $163
Lipped Threshold - 5/8” x 5” 72” x AL (U.L.) 3720031 $117
Saddle Threshold - 1/2” x 6” x 36” x AL (U.L. and ADA) 3720037 $233
Door Shoe - 36” x AL with Gray Vinyl Insert 3720041 $99
41" Rain Drip 3720039 $38
76" Rain Drip 3720040 $47
Effective April 4, 2020
107
HardwareDOOR PLATES, STOPS, BOLTS, SWEEPS AND LOCKSETS
Part Description Catalog Number List Each
Screw on Weatherstrip - 36" 3720032 $104
Screw on Weatherstrip - 72" 3720033 $134
Stick on Weatherstrip - 17' 3720034 $41
Stick on Weatherstrip - 21' 3720035 $51
Stick on Weatherstrip - 25' 3720036 $62
Effective April 4, 2020
108