INDEX - About SFSPunitech-ikk.com/.../steel-construction-products/... · SFSP has manufacturing facilities in KSA, UAE, Egypt, and Lebanon. SFSP adapts quickly and easily to market

1

- About SFSP- Technical Data- Trunking Runs- Trunking Fittings- Trunking Accessories- C-CHannels Loads & Supports- Locations

Cable Trunking Catalogue

4202125434650

INDEX

www.sfsp-ikk.com

3

ABOUTSFSP

4

Specialized/Sigma Factory for Steel Products (SFSP) was first established in KSA in 1989 and has been expanding ever since through a variety of products and through its geographical presence.Production at the factory is observed using modern practices of manufacturing methods in the steel construction industry with a definite compliance to international standards of fabrication. SFSP has manufacturing facilities in KSA, UAE, Egypt, and Lebanon. SFSP adapts quickly and easily to market demands and requirements. The factory is operating a top of the line production machinery, fully automated with highest technology to ensure quality and maintain speed with delicacy.

Quality at SFSP is uncompromised; the factories have been able to acquire ISO 9001: 2008 Quality Management System, ISO 14001:2004 Environmental Management certified factory, and OHSAS 18001:2007 Occupational, Health and Safety Management factory.

HOT-DIP GALVANIZATIONSFSP has an in-house state of the art Hot-Dip Galvanization facility, which permits a full control of the quality of its finished products, offering better services to our clients globally.

Specialized Factory for Steel Products Co. LtdSigma Factory for Steel Productswww.sfsp-ikk.com

5

Specialized Factory for Steel Products Co. Ltdwww.sfsp-ikk.com

Specialized Factory for Steel Products Co., ltd, which is part of Isam Khairi Kabbani Group of companies is a leading fabricator of steel construction products serving the kingdom of Saudi Arabia since 1989.

The factory operates under TQM ISO modules, using the latest modern technology in the steel fabrication and manufacturing industry in conformity with International standards for safety and in compliance with the environmental regulations in the Kingdom.

The factory has inaugurated its new manufacturing facilities which is located in the 3rd Industrial Area of Jeddah with a total built facilities of 37,000 squared meters.

The facilities include two manufacturing areas, a hot dip galvanization advanced section, warehousing areas and administrative building. The project is an advanced environmental low emissions factory built with a definite consideration of the safety of its workers and visitors.

6


A crucial factor in the job of a factory is to provide continuous technical services and consultations.That’s why SFSP has invested in a professional team of researchers and specialists.

SFSP has recruited brilliant graduates and experienced engineers having the appropriate knowhow on the on latest technology changes and development in the steel building materials industry.

The product range is developed and updated according to the relevant standards of fabrication across markets, whilst the business processes are evaluated to achieve maximum efficiency.

SFSP R&D Core Objectives- Carry out responsibilities effectively in a safe and healthy work environment.- Develop and implement research programs relevant to the products and solutions introduced and ensure that the

results are communicated clearly in-house and among the clients , concisely and accurately.

Unitech Deutshland GmbH is the design office of Unitech for Building and Construction Materials and is situated in Stuttgart, Germany.

DESIGN AND ENGINEERING OFFICE - GERMANY

TECHNICAL SERVICES

7

SOCIAL RESPONSIBILITY

Being socially responsible is a part of who we are and how we do our business. We aim to provide useful products and services, to provide jobs and development opportunities for our communities, and to gain satisfaction through meaningful work. We make a difference by acting on the values and principles of our societies and we inspire others to do so. At SFSP, we anticipate and reduce threats caused by environmental changes or natural disasters, and we are well adapted to significant social changes. We contribute to a more sustainable society by means of value and support to our consumers, supply chains, and stakeholders. We are keen to identify ways they can improve our impacts on the people and places we work and live in, and thereby become more valuable and valued members of society.

- Organizational governance: We promote accountability and transparency at all levels, thus, promoting responsibility

- Human care: We treat individuals with respect; and make efforts to help members of vulnerable groups

- Labor practices: We provide just, safe and favorable conditions to workers

- Environment: At SFSP, we Identify and improve environmental impacts of our operations, including the resource use of natural resources and waste disposal.

- Fair operating practices: Practicing accountability and fairness in dealings with other businesses

At SFSP, we are committed to continuous improvement – ongoing learning, process review and innovative thinking that foster new initiatives; and better practices. Our environmental programs evolve to meet today’s changing needs while; protecting resources for future; generations.

HEALTH AND SAFETY

The Factory Management regard the health and safety of the employees, clients and all others that may be affected by their operations to be of a major importance.

In support of this, the management promotes health and safety throughout the Factory’s operations and endeavour to engender a positive attitude in all employees towards the prevention of accidents and maintenance of healthy working arrangements.

The Factory satisfies the requirements of the Health, Safety and related legislation by setting out the responsibilities of all levels of staff and the arrangements for carrying out those responsibilities and in particular do what is reasonably practicable to:1. Maintains safe & healthy working conditions.

2. Ensures that all facilities and equipment are safe and properly maintained.

3. Provides products that can be applied and used safely and without risk to health.

4. Provides and maintain working procedures, that are safe and without risk to health, throughout the its operations in respect of:

• The use, handling, storage, transports and disposal of materials and substances.

• The use of factory equipment. • Potential emergency situations, including first aid,

fire and escape of substances.5. Ensure the competence of employees.

The factory is an OHSAS 18001:2007 Occupational, Health and Safety Management certified Factory.

8

SFSP facilities are equipped with the most technologically advanced machinery amongst are Laser Cut Machines, Robot Bending Sets, Welding Robot Sets, sophisticated Cable Management Production Lines, as well as Specialized Industrial Sections for its Hot Dip Galvanization facilities.

ENVIRONMENTAL AWARENESS

SFSP is committed to the following:• Compliance with all statutory and regulatory

requirements related to its activities, products and services and the environmental aspects.

• Identifying quality and environmental objectives by review and audit of the processes both in-house and on-site.

• Formally setting objectives based on the results of the process reviews and their significance in relation to their impact on the environment and the continual improvement of the quality and environmental management system.

• Implementing management programs to achieve these objectives.

• Investing in a well-trained and motivated workforce.• Working closely with suppliers and customers to

ensure mutual understanding and benefits of the environmental aspects consideration.

• Reviewing our policy and objectives as part of the Management Review Process.

• Communicating this policy to all persons working for or on behalf of the organization.

• Preventing and minimizing Pollution to the environment.

SFSP operates under environmental management system certification BS EN ISO 14001:2004 and maintain it through registration and annual review.

9

CNC MACHINES

WELDING ROBOT

SETS

CNC PUNCHING

FIBER LASER CUT

ROBOTIC BENDING

CELL

10

SFSP CERTIFICATION

ISO 45001 : 2018 (Occupational Health & Safety)

ISO 9001 : 2015(Quality Management Systems)

14001 : 2015(Environmental Management System)

11

STD 096 (Q-Mark Certificate)

ISO 14001 : 2015 (Environmental Management System)

OHSAS 18001 : 2018 (Health & Safety Management System)

ISO 9001 : 2015 (Quality Management System)

12

UL Certification*

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20170811-R38825 Report Reference R38825-20170811

Issue Date 2017-AUGUST-11

Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1

Issued to: Sigma Factory for Steel Products Saih Shuaib 3, 4 R/A Dubai Industrial City Opposite DEWA Substation Dubai UNITED ARAB EMIRATES

This is to certify that representative samples of

CHUTE-TYPE FIRE DOORS Chute-type fire door and frame assembly of the insulated type, rated up to and including 2 hr, 450°F Temperature Rise Rating.

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: ANSI/UL 10B, Fire Tests of Door Assemblies Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product.

DEKRA Certification B.V.

2 <drs. G.J. Zoetbrood H.R.M. BarendsManaging Director Certification Manager

© Integral publication of this certificate is allowed

ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396

CERTIFICATE

Issued to:Applicant: Manufacturer/Licensee:Isam Kabbani Trading Est. (Unitech)RashidiyaDubai, United Arab Emirates

Sigma Factory for Steel Products (SFSP)Saih Shuaib 3, 4R/A, Dubai Industrial City,Dubai, United Arab Emirates

Product : Cable management systemTrade name : SFSPTypes : IE-CT-X-10, IE-CT-X-12, IE-CT-X-15, IE-CT-X-20

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

DEKRA hereby declares that the above-mentioned product has been certified on the basis of: a type test according to the standard IEC 61537:2006 and EN 61537:2007 an inspection of the production location according to CENELEC Operational Document CIG 021 a certification agreement with the number 2156954

DEKRA hereby grants the right to use the KEMA-KEUR certification mark.

The KEMA-KEUR certification mark may be applied to the product as specified in this certificate for the duration of the KEMA-KEUR certification agreement and under the conditions of the KEMA-KEURcertification agreement.

This certificate is issued on: 20 January, 2014 and expires upon withdrawal of one of the above mentioned standards.

Certificate number: 2156954.01

DEKRA Certification B.V.

2 <drs. G.J. Zoetbrood H.R.M. BarendsManaging Director Certification Manager

© Integral publication of this certificate is allowed

ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396

CERTIFICATE

Issued to:Applicant: Manufacturer/Licensee:Isam Kabbani Trading Est. (Unitech)RashidiyaDubai, United Arab Emirates

Sigma Factory for Steel Products (SFSP)Saih Shuaib 3, 4R/A, Dubai Industrial City,Dubai, United Arab Emirates

Product : Cable management systemTrade name : SFSPTypes : IE-CT-X-10, IE-CT-X-12, IE-CT-X-15, IE-CT-X-20

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

DEKRA hereby declares that the above-mentioned product has been certified on the basis of: a type test according to the standard BS EN 61537:2007 based on IEC 61537:2006 an inspection of the production location according to CENELEC Operational Document CIG 021 a certification agreement with the number 2156954

DEKRA hereby grants the right to use the KEMA-KEUR BS certification mark.

The KEMA-KEUR BS certification mark may be applied to the product as specified in this certificate for the duration of the KEMA-KEUR BS certification agreement and under the conditions of the KEMA-KEUR BScertification agreement.

This certificate is issued on: 3 February, 2014 and expires upon withdrawal of one of the above mentioned standards.

Certificate number: 2156954.02

BS EN 61537:2007 (KEMA - KEUR Certified For Cable Management Products)

BS EN 61537:2007 (KEMA - KEUR BS Certified For Cable Management Products)

UL Certification* (Cable Trays)

UL Certification* (Chute Type Fire Doors)

SFSP CERTIFICATION

13

SFSP PRODUCTS

SFSP produces a variety of products ranging from cable management systems; cable trays, cable ladders, basket trays, trunkings and support systems, to mechanical cladding fixations, steel lintels and block work accessories, plasterers’ beads, expanded metal and block work reinforcement, strut channel systems, pipe clamps & hangers, gypsum profiles as well as garbage and linen chutes. With the introduction of new machines and the enhancement of production methods, SFSP continues to develop its production methods systematically as well as thoroughly. Its design office in Stuttgart, Germany provides a comprehensive design and calculation case studies, enabling the factory to have the safety factors required for the usage of its products.


CABLE TRAYS & ACCESSORIESCable Trays are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrications and finishes.

CABLE LADDERS (WELDED & SWAGED)Cable Ladders of different side heights are available upon request.

BASKET TRAYS & ACCESSORIESSFSP’s Basket Tray systems make connections fast and simple with limited need for tools. Its design allows for continuous airflow, and prevents heating up of cables. SFSP’s Basket Tray comes in a full range of sizes and is made with high-strength welded steel wires.

CABLE TRUNKINGSCable Trunkings and Accessories are offered in a comprehensive range. Mill galvanized, hot-dip galvanized, and powder coated are the various finishes produced in our factories.

UNDERFLOOR TRUNKINGUnderfloor Trunking Systems solutions incorporate a range of products for the distribution of power and data services , it is a coordinated set of containments that protect, segregate, contain, and route cables within a given environment.

14

EXPANDED METALS, PLASTERERS` BEADSExpanded Metals help the formation of joints, protection of corners and resistance against cracks, chips and impact damage.

BLOCK LADDER REINFORCEMENTSFSP ladder and truss types are used for the reinforcement of brick and block masonry to give improved tensile strength to walls subjected to lateral loading e.g. wind and seismic. SFSPblock reinforcements reduces the risk of cracking either at stress concentration around opening.

STEEL LINTELS & BLOCK WORK ACCESSORIESSteel Lintels provide a combination of strength and light weight, resulting in efficient load bearing performance and increased productivity on site. They are characterized by their ease of installation in addition to time as well as money saving.

PIPE CLAMPS & HANGERSPipe Clamps and Hangers from SFSP used in the support of pipes and equipments are manufactured according to the highest standards of fabrication.A diversified choice of Pipe Hangers, Pipe Clamps, EMT Straps, Omega Clamps, Beam Clamps, J and U-Bolts and Threaded Accessories.

MARBLE & GRANITE FIXINGSStangle Cladding Fixation includes design, calculation and production of several types of mechanical fixings and accessories used for cladding purposes. Stainless and galvanized steel are among the various materials used in the fabrication.

DRY WALL & CEILING PROFILESSFSP provides a complete product range for dry wall and ceiling constructions. Studs, Runners, Furring Channels, Ceiling Channels and Wall Angles are among the range of products produced to service the dry wall installers.

GARBAGE & LINEN CHUTESChutes from SFSP are very convenient, simple and low cost method of controlling and disposing of refuse and linen. Chutes meet the most stringent requirements of environmental health and safety. Chutes are used as original equipment in new buildings, such as : Hotels, Hospitals, High Rises and Residential Towers.

C-CHANNEL STRUT SYSTEMSSFSP’s Metal Framing Systems provide an economical solution for electrical, mechanical and industrial supports with a wide variety of applications in the construction industry.Applications: - Pipe and Conduit Supports - Tunnel Pipe Stanchions - Racks and Shelvings - Wall Framings.

CABLE MANAGEMENT SUPPORT SYSTEMSCable Support Systems are well designed to provide necessary support for cable trays, cable ladders and trunkings. Cable supports are manufactured according to common standards from high quality raw materials.

15

SFSP Products are solely distributed by UNITECH for Building and Construction Materials

Isam Kabbani & Partners for Building and Construction Materials Co., Ltd.رشكة عصام قباين ورشكاه ملواد األنشاء والتعمري املحدودة

Jordan Build Co. for Building & Construction Materials – رشكة بناء األردن ملواد اإلنشاء و التعمري و الكهرباء

UNITECH ME s.a.r.l – رشكة يونيتك ميدل إيست ش.م.م

Issam Kabbani Trading Est. –مؤسسة عصام قباين للتجارة

+971 4 8181925, Ext. 4269+966 13 8590097, Ext. 3214

Isam Kabbani Trading Est.مؤسسة عصام قباين التجارية

KSA

Hassan Kabbani for General Contracting Est.مؤسسة حسان قباين للمقاوالت العامة للمباين

KUWAIT

UNITECH Egypt for Building Materialsرشكة يونيتك مرص ملواد البناء

EGYPT

JORDAN

Isam Kabbani & Partners Trading Co. رشكة عصام قباين ورشكاه للتجارة

OMAN

LEBANON

BAHRAIN UAE

UAEKSA

All Products Manufactured by SFSP are Solely Distributed by SFSP Sister Companies in the Following Countries

SFSP CUSTUMER SERVICE CALL CENTER

16

IKKGroup of Companies

The IKK Group is a major business institution, serving most of the Arab World in the industrial, construction and trading fields, as well as in specialized maintenance and services.

Today, the IKK Group of Companies is a pioneer in waterproofing, weatherproofing, building material supplies, UPVC and CPVC and high density polyethylene pipes and fittings and several other products for the construction industry.

The Group is also represented in the sanitary products, steel production, kitchen manufacturing, telecommunications, food, decoration, re-insurance and real estate business domain.

Composed of 60 companies, the IKK Group operates through almost 200 divisions, branches and outlets; it is spread over 12 countries, covering all major cities in the region and employing around 13,000 employees.

Our vision is to maintain and improve our leading position as a contractor whose reputation is built on the ability to completely satisfy customers by providing high quality services. As specialists in their respective fields, our teams of professionals are dedicated to a standard of excellence for quality and performance, through continuous development, which will set standards in our industry.We are simply providing solutions for a future of success.

Our mission is to provide our part of the Arab World with local and reliable services in a variety of sectors and products.

To create employment to thousands of personnel and in-house training for hundreds of young Arab graduates in crucial sectors to the benefit of the IKK Group, the graduates themselves and their own communities.

To set a good example of our basic business philosophy: “Hire well, train well, pay well and treat well.”

UNITECH ISAM KABBANI & PARTNERS FOR BUILDING & CONSTRUCTION MATERIALS

Isam Kabbani & Partners for buildings & construction materials co. Ltd (UNITECH) which is part of the IKK group of companies is recognized and acknowledged for the quality and reliability of its products and services as well as for the commitment, professionalism and experience of its employees.

Isam Kabbani & partners for buildings & construction materials co. Ltd (UNITECH) core valuse are to offer value products and services to its clients, to work closely with them in a lasting business partnership that provides an outstanding performance.

A partnership based on trust, harmony, and a hard to beat services and solutions.

Our Factories have acquired, in addition to ISO 9001:2008 Quality Management System, the ISO 14001:2004 Environmental Management System.

Our care for the environment has been translated via Isam Kabbani &partners for buildings &construction materials co. Ltd (UNITECH)’s membership in the US Green Building Council as a Golden Member.

Our VisionUNITECH to be the Customer’s First Choice.

Our MissionWe have the conviction to be the leader in building & construction industry through:- Providing Excellence in Services with Passionate and

Educated Sales Force- Strengthen Culture through Unified Sense of Purpose- Innovative Product Range which is Customer Centric- Reputable and Quality Service Company- Attracting, Engaging and Retaining Talent

16

17

CABLE MANAGEMENT SYSTEMS

Cable Management Systems` types fittings and accessories from SFSP are manufactured in compliance with :

- IEC 61537:2007- BS EN 61537:2007

International Electrotechnical Commission(Cable management, Cable tray systems and cable ladder systems)

- SASO IEC (61537:2006) Saudi Standard(Cable management, Cable tray systems and cable ladder systems)

- NEMA VE 1 - 2009 National Electrical Manufacturers Association.(Metal Cable Tray Systems)

- NEMA VE 2 - 2006 National Electrical Manufacturers Association.(Metal Cable Tray Installation Guide Lines)

- NEC (ANSI / NFPA 70) National Electric Code(Metal Cable Tray Guide Lines)

SFSP Cable Management Systems, fittings and accessories are manufactured in compliance with international standards. SFSP provides a wide range of products capable of providing the characteristics which respond to the proposed application, along with quality of assembly, speed of installation and cost-saving Cable Management Systems. Calculations are provided by our design office in Stuttgart, Germany.

SFSP Cable Management Systems are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrication and finishing. Cable Management Systems are economical wire and cable management systems designed to support and protect electrical wires and cables.

National Electric Code (NEC) permits Cable Trays in a wide variety of indoor and outdoor applications. The NEC also permits Cable Trays for use as equipment ground conductor.

Cable Management Systems can provide significant advantages in cable filling over other wiring methods.This can provide savings in the size or number of raceways required, thereby, reducing both materialand labor costs. In many cases, NEC permits greater conductor ampacities in Cable Tray Systems than for other wiring methods.

Under certain conditions, the NEC allows “Free Air” rating of large, single conductor power cables (4/0 & larger) in ventilated Cable Management Systems. This can provide significant savings in conductor costs. Cable Management Systems permit much greater spacing between support hangers than most other systems, providing savings in support costs and installation labor.

www.sfsp-ikk.com

TECHNICAL DATA

19

Specifications and Installation GuideTo comply with wiring regulations, the installer shall ensure that the trunking is not overfilled and acceptable pressure is applied to the cables.In order to do this, the installer shall not exceed the 45% space factor given in the rigs.The 45% space factor means that the total cross-sectional area of all cables shall not be greater than 45% of the cross-sectional area of the trunking.

Choosing Correct Trunking DimensionsFor each cable being used, obtain the appropriate factor from ‘ cable sizes and factors ’ table .Sum all these cable factors and compare the result to the ‘ trunking sizes and capacity factor ’ table.The minimum size of trunking that can be used is that size having a factor equal to, or greater than the sum of all trunking capacity factors.

Example: - Type of cables = strandedCable size (cross–sectional area) = 25 mm2

Number of cables= 20Common cable factor = 73.9 (cable sizes and factors table)

- Type of cables = solid Cable size (cross–sectional area) = 2.5 mm2

Number of cables = 15Common cable factor = 11.9 (cable sizes and factors table)

Number of cables x cable factor = Capacity factor

Stranded : 20 x 73.9 = 1478.0 Solid : 15 x 11.9 = 178.5 Total ( Stranded + Solid ) = 1656.5

Choose trunking size 75 x 75 = trunking capacity 2371 > 1656.5 or trunking size 100 x 50 = trunking capacity 2091 > 1656.5Check trunking sizes and capacity factor table.

Size (mm2)(nom.)

Commoncable factor

Solid

5·1 0·8

5·2 9·11

Stranded

5·1 6·8

5·2 6·12

0·4 6·16

0·6 2·21

0·10 3·35

0·16 8·47

0·25 9·73

0·35 3·93

0·50 7·128

0·70 4·167

0·95 7·229

0·120 6·277

0·150 1·343

Size (mm)

Trunkingcapacity factor

50 x 50 1037

75 x 50 1555

75 x 75 2371

100 x 50 2091

100 x 75 3189

100 x 100 4252

150 x 50 3091

150 x 75 4742

150 x 100 6394

150 x 150 9697

225 x 75 7114

225 x 100 9298

225 x 150 14652

225 x 225 21766

300 x 75 9486

300 x 100 12788

300 x 150 19447

Cable sizes and factors Trunking sizes and capacity factors

TECHNICAL DATA

- All dimensions are made available upon request

www.sfsp-ikk.com

TRUNKING RUNS

21

Single Compartment Cable TrunkingThickness: 1 mm - 1.2 mm - 1.5 mm

Available trunkings’ lengths are:- 2440 mm / 3000 mm

Reference Dimensions

1 mm 1.2 mm 1.5 mm mm inch

SCT 4200 050 0050 2 SCT 4200 050 0050 3 SCT 4200 050 0050 4 50 x 50 mm (2”x2”)

SCT 4200 075 0050 2 SCT 4200 075 0050 3 SCT 4200 075 0050 4 75 x 50 mm (3”x2”)

SCT 4200 075 0075 2 SCT 4200 075 0075 3 SCT 4200 075 0075 4 75 x 75 mm (3”x3”)

SCT 4200 100 0050 2 SCT 4200 100 0050 3 SCT 4200 100 0050 3 100 x 50 mm (4”x2”)

SCT 4200 100 0075 2 SCT 4200 100 0075 3 SCT 4200 100 0075 3 100 x 75 mm (4”x3”)

SCT 4200 100 0100 2 SCT 4200 100 0100 3 SCT 4200 100 0100 3 100 x 100 mm (4”x4”)

SCT 4200 150 0050 2 SCT 4200 150 0050 3 SCT 4200 150 0050 3 150 x 50 mm (6”x2”)

SCT 4200 150 0075 2 SCT 4200 150 0075 3 SCT 4200 150 0075 3 150 x 75 mm (6”x3”)

SCT 4200 150 0100 2 SCT 4200 150 0100 3 SCT 4200 150 0100 3 150 x 100 mm (6”x4”)

SCT 4200 150 0150 2 SCT 4200 150 0150 3 SCT 4200 150 0150 3 150 x 150 mm (6”x6”)

SCT 4200 200 0100 2 SCT 4200 200 0100 3 SCT 4200 200 0100 3 200 x 100 mm (8”x4”)

SCT 4200 300 0100 2 SCT 4200 300 0100 3 SCT 4200 300 0100 3 300 x 100 mm (12”x4”)

SCT 4200 450 0100 2 SCT 4200 450 0100 3 SCT 4200 450 0100 3 450 x 100 mm (18”x4”)

SCT 4200 600 0100 2 SCT 4200 600 0100 3 SCT 4200 600 0100 3 600 x 100 mm (24”x4”)

H H

W W

H H

W W

Type 1: inside Type 2: outside

Centralreducer Tee top lid

Straight length

90° top lid bend square

Central two dimensions reducer

45° inside lid bend

Intersection

90° top lid bend

Bend 90° inside Lid

Straight length

Single compartment return edge cable trunking is manufactured with various thicknesses 1.0 mm to 1.5 mm in compliance with BS 4678-1 was replaced by BS EN 50085-1 :2005 and BS EN 50085-2 :2006. It comes with all standard trunking couplings and lids that quickly lock into place.

SINGLE COMPARTMENT

SCT - 4200

22

L

W

H

H H

W W

H H

W W


T W

H

RF

Double Compartment Cable TrunkingThickness: 1 mm - 1.2 mm - 1.5 mm

Available trunking lengths are as follows:2440 mm / 3000 mm



DCT 5200 050 0050 2 DCT 5200 050 0050 3 DCT 5200 050 0050 4 50 x 50 mm (2”x2”)

DCT 5200 075 0050 2 DCT 5200 075 0050 3 DCT 5200 075 0050 4 75 x 50 mm (3”x2”)

DCT 5200 075 0075 2 DCT 5200 075 0075 3 DCT 5200 075 0075 4 75 x 75 mm (3”x3”)

DCT 5200 100 0050 2 DCT 5200 100 0050 3 DCT 5200 100 0050 4 100 x 50 mm (4”x2”)

DCT 5200 100 0075 2 DCT 5200 100 0075 3 DCT 5200 100 0075 4 100 x 75 mm (4”x3”)

DCT 5200 100 0100 2 DCT 5200 100 0100 3 DCT 5200 100 0100 4 100 x 100 mm (4”x4”)

DCT 5200 150 0050 2 DCT 5200 150 0050 3 DCT 5200 150 0050 4 150 x 50 mm (6”x2”)

DCT 5200 150 0075 2 DCT 5200 150 0075 3 DCT 5200 150 0075 4 150 x 75 mm (6”x3”)

DCT 5200 150 0100 2 DCT 5200 150 0100 3 DCT 5200 150 0100 4 150 x 100 mm (6”x4”)

DCT 5200 150 0150 2 DCT 5200 150 0150 3 DCT 5200 150 0150 4 150 x 150 mm (6”x6”)

DCT 5200 200 0100 2 DCT 5200 200 0100 3 DCT 5200 200 0100 4 200 x 100 mm (8”x4”)

DCT 5200 300 0100 2 DCT 5200 300 0100 3 DCT 5200 300 0100 4 300 x 100 mm (12”x4”)

DCT 5200 450 0100 2 DCT 5200 450 0100 3 DCT 5200 450 0100 4 450 x 100 mm (18”x4”)

DCT 5200 600 0100 2 DCT 5200 600 0100 3 DCT 5200 600 0100 4 600 x 100 mm (24”x4”)

DOUBLE COMPARTMENT

DCT - 5200

- Other dimensions are available upon request.

23

L

L

L - Separator Type

U - Separator Type

H H

W W

H H

W W

H

WT

RF

RF

H

W


Triple Compartment Cable TrunkingThickness: 1 mm - 1.2 mm - 1.5 mm Available trunking lengths are as follows:

2440 mm / 3000 mm



TCT 6200 050 0050 2 TCT 6200 050 0050 3 TCT 6200 050 0050 4 50 x 50 mm (2”x2”)

TCT 6200 075 0050 2 TCT 6200 075 0050 3 TCT 6200 075 0050 4 75 x 50 mm (3”x2”)

TCT 6200 075 0075 2 TCT 6200 075 0075 3 TCT 6200 075 0075 4 75 x 75 mm (3”x3”)

TCT 6200 100 0050 2 TCT 6200 100 0050 3 TCT 6200 100 0050 4 100 x 50 mm (4”x2”)

TCT 6200 100 0075 2 TCT 6200 100 0075 3 TCT 6200 100 0075 4 100 x 75 mm (4”x3”)

TCT 6200 100 0100 2 TCT 6200 100 0100 3 TCT 6200 100 0100 4 100 x 100 mm (4”x4”)

TCT 6200 150 0050 2 TCT 6200 150 0050 3 TCT 6200 150 0050 4 150 x 50 mm (6”x2”)

TCT 6200 150 0075 2 TCT 6200 150 0075 3 TCT 6200 150 0075 4 150 x 75 mm (6”x3”)

TCT 6200 150 0100 2 TCT 6200 150 0100 3 TCT 6200 150 0100 4 150 x 100 mm (6”x4”)

TCT 6200 150 0150 2 TCT 6200 150 0150 3 TCT 6200 150 0150 4 150 x 150 mm (6”x6”)

TCT 6200 200 0100 2 TCT 6200 200 0100 3 TCT 6200 200 0100 4 200 x 100 mm (8”x4”)

TCT 6200 300 0100 2 TCT 6200 300 0100 3 TCT 6200 300 0100 4 300 x 100 mm (12”x4”)

TCT 6200 450 0100 2 TCT 6200 450 0100 3 TCT 6200 450 0100 4 450 x 100 mm (18”x4”)

TCT 6200 600 0100 2 TCT 6200 600 0100 3 TCT 6200 600 0100 4 600 x 100 mm (24”x4”)

TRIPLE COMPARTMENT

TCT - 6200 U / TCT - 6200 L


www.sfsp-ikk.com

TRUNKINGFITTINGS

25

H H

W W

H H

W W

Type 1: inside

Type 2: outside

Thickness: 1 mm - 1.2 mm - 1.5 mm


BEND 45 ° TOP LID

BEND 45 ° TOP LID DOUBLE

TL45 7110

TLD45 7110



TL45 7110 050 0050 2 TL45 7110 050 0050 3 TL45 7110 050 0050 4 50 x 50 mm (2”x2”)

TL45 7110 075 0050 2 TL45 7110 075 0050 3 TL45 7110 075 0050 4 75 x 50 mm (3”x2”)

TL45 7110 075 0075 2 TL45 7110 075 0075 3 TL45 7110 075 0075 4 75 x 75 mm (3”x3”)

TL45 7110 100 0050 2 TL45 7110 100 0050 3 TL45 7110 100 0050 4 100 x 50 mm (4”x2”)

TL45 7110 100 0075 2 TL45 7110 100 0075 3 TL45 7110 100 0075 4 100 x 75 mm (4”x3”)

TL45 7110 100 0100 2 TL45 7110 100 0100 3 TL45 7110 100 0100 4 100 x 100 mm (4”x4”)

TL45 7110 150 0050 2 TL45 7110 150 0050 3 TL45 7110 150 0050 4 150 x 50 mm (6”x2”)

TL45 7110 150 0075 2 TL45 7110 150 0075 3 TL45 7110 150 0075 4 150 x 75 mm (6”x3”)

TL45 7110 150 0100 2 TL45 7110 150 0100 3 TL45 7110 150 0100 4 150 x 100 mm (6”x4”)

TL45 7110 150 0150 2 TL45 7110 150 0150 3 TL45 7110 150 0150 4 150 x 150 mm (6”x6”)

TL45 7110 200 0100 2 TL45 7110 200 0100 3 TL45 7110 200 0100 4 200 x 100 mm (8”x4”)

TL45 7110 300 0100 2 TL45 7110 300 0100 3 TL45 7110 300 0100 4 300 x 100 mm (12”x4”)

TL45 7110 450 0100 2 TL45 7110 450 0100 3 TL45 7110 450 0100 4 450 x 100 mm (18”x4”)

TL45 7110 600 0100 2 TL45 7110 600 0100 3 TL45 7110 600 0100 4 600 x 100 mm (24”x4”)



TLD45 7110 050 0050 2 TLD45 7110 050 0050 3 TLD45 7110 050 0050 4 50 x 50 mm (2”x2”)

TLD45 7110 075 0050 2 TLD45 7110 075 0050 3 TLD45 7110 075 0050 4 75 x 50 mm (3”x2”)

TLD45 7110 075 0075 2 TLD45 7110 075 0075 3 TLD45 7110 075 0075 4 75 x 75 mm (3”x3”)

TLD45 7110 100 0050 2 TLD45 7110 100 0050 3 TLD45 7110 100 0050 4 100 x 50 mm (4”x2”)

TLD45 7110 100 0075 2 TLD45 7110 100 0075 3 TLD45 7110 100 0075 4 100 x 75 mm (4”x3”)

TLD45 7110 100 0100 2 TLD45 7110 100 0100 3 TLD45 7110 100 0100 4 100 x 100 mm (4”x4”)

TLD45 7110 150 0050 2 TLD45 7110 150 0050 3 TLD45 7110 150 0050 4 150 x 50 mm (6”x2”)

TLD45 7110 150 0075 2 TLD45 7110 150 0075 3 TLD45 7110 150 0075 4 150 x 75 mm (6”x3”)

TLD45 7110 150 0100 2 TLD45 7110 150 0100 3 TLD45 7110 150 0100 4 150 x 100 mm (6”x4”)

TLD45 7110 150 0150 2 TLD45 7110 150 0150 3 TLD45 7110 150 0150 4 150 x 150 mm (6”x6”)

TLD45 7110 200 0100 2 TLD45 7110 200 0100 3 TLD45 7110 200 0100 4 200 x 100 mm (8”x4”)

TLD45 7110 300 0100 2 TLD45 7110 300 0100 3 TLD45 7110 300 0100 4 300 x 100 mm (12”x4”)

TLD45 7110 450 0100 2 TLD45 7110 450 0100 3 TLD45 7110 450 0100 4 450 x 100 mm (18”x4”)

TLD45 7110 600 0100 2 TLD45 7110 600 0100 3 TLD45 7110 600 0100 4 600 x 100 mm (24”x4”)



26

Type 1: inside

Type 2: outside



BEND 45 ° INSIDE LID

BEND 45 ° TOP LID TRIPLE

IL45 7210

TLT45 7110



IL45 7210 050 0050 2 IL45 7210 050 0050 3 IL45 7210 050 0050 4 50 x 50 mm (2”x2”)

IL45 7210 075 0050 2 IL45 7210 075 0050 3 IL45 7210 075 0050 4 75 x 50 mm (3”x2”)

IL45 7210 075 0075 2 IL45 7210 075 0075 3 IL45 7210 075 0075 4 75 x 75 mm (3”x3”)

IL45 7210 100 0050 2 IL45 7210 100 0050 3 IL45 7210 100 0050 4 100 x 50 mm (4”x2”)

IL45 7210 100 0075 2 IL45 7210 100 0075 3 IL45 7210 100 0075 4 100 x 75 mm (4”x3”)

IL45 7210 100 0100 2 IL45 7210 100 0100 3 IL45 7210 100 0100 4 100 x 100 mm (4”x4”)

IL45 7210 150 0050 2 IL45 7210 150 0050 3 IL45 7210 150 0050 4 150 x 50 mm (6”x2”)

IL45 7210 150 0075 2 IL45 7210 150 0075 3 IL45 7210 150 0075 4 150 x 75 mm (6”x3”)

IL45 7210 150 0100 2 IL45 7210 150 0100 3 IL45 7210 150 0100 4 150 x 100 mm (6”x4”)

IL45 7210 150 0150 2 IL45 7210 150 0150 3 IL45 7210 150 0150 4 150 x 150 mm (6”x6”)

IL45 7210 200 0100 2 IL45 7210 200 0100 3 IL45 7210 200 0100 4 200 x 100 mm (8”x4”)

IL45 7210 300 0100 2 IL45 7210 300 0100 3 IL45 7210 300 0100 4 300 x 100 mm (12”x4”)

IL45 7210 450 0100 2 IL45 7210 450 0100 3 IL45 7210 450 0100 4 450 x 100 mm (18”x4”)

IL45 7210 600 0100 2 IL45 7210 600 0100 3 IL45 7210 600 0100 4 600 x 100 mm (24”x4”)



TLT45 7110 050 0050 2 TLT45 7110 050 0050 3 TLT45 7110 050 0050 4 50 x 50 mm (2”x2”)

TLT45 7110 075 0050 2 TLT45 7110 075 0050 3 TLT45 7110 075 0050 4 75 x 50 mm (3”x2”)

TLT45 7110 075 0075 2 TLT45 7110 075 0075 3 TLT45 7110 075 0075 4 75 x 75 mm (3”x3”)

TLT45 7110 100 0050 2 TLT45 7110 100 0050 3 TLT45 7110 100 0050 4 100 x 50 mm (4”x2”)

TLT45 7110 100 0075 2 TLT45 7110 100 0075 3 TLT45 7110 100 0075 4 100 x 75 mm (4”x3”)

TLT45 7110 100 0100 2 TLT45 7110 100 0100 3 TLT45 7110 100 0100 4 100 x 100 mm (4”x4”)

TLT45 7110 150 0050 2 TLT45 7110 150 0050 3 TLT45 7110 150 0050 4 150 x 50 mm (6”x2”)

TLT45 7110 150 0075 2 TLT45 7110 150 0075 3 TLT45 7110 150 0075 4 150 x 75 mm (6”x3”)

TLT45 7110 150 0100 2 TLT45 7110 150 0100 3 TLT45 7110 150 0100 4 150 x 100 mm (6”x4”)

TLT45 7110 150 0150 2 TLT45 7110 150 0150 3 TLT45 7110 150 0150 4 150 x 150 mm (6”x6”)

TLT45 7110 200 0100 2 TLT45 7110 200 0100 3 TLT45 7110 200 0100 4 200 x 100 mm (8”x4”)

TLT45 7110 300 0100 2 TLT45 7110 300 0100 3 TLT45 7110 300 0100 4 300 x 100 mm (12”x4”)

TLT45 7110 450 0100 2 TLT45 7110 450 0100 3 TLT45 7110 450 0100 4 450 x 100 mm (18”x4”)

TLT45 7110 600 0100 2 TLT45 7110 600 0100 3 TLT45 7110 600 0100 4 600 x 100 mm (24”x4”)



H H

W W

H H

W W

27



BEND 45 ° INSIDE LID DOUBLE

BEND 45 ° INSIDE LID TRIPLE

ILD45 7210

ILT45 7210 - 7215



ILD45 7210 050 0050 2 ILD45 7210 050 0050 3 ILD45 7210 050 0050 4 50 x 50 mm (2”x2”)

ILD45 7210 075 0050 2 ILD45 7210 075 0050 3 ILD45 7210 075 0050 4 75 x 50 mm (3”x2”)

ILD45 7210 075 0075 2 ILD45 7210 075 0075 3 ILD45 7210 075 0075 4 75 x 75 mm (3”x3”)

ILD45 7210 100 0050 2 ILD45 7210 100 0050 3 ILD45 7210 100 0050 4 100 x 50 mm (4”x2”)

ILD45 7210 100 0075 2 ILD45 7210 100 0075 3 ILD45 7210 100 0075 4 100 x 75 mm (4”x3”)

ILD45 7210 100 0100 2 ILD45 7210 100 0100 3 ILD45 7210 100 0100 4 100 x 100 mm (4”x4”)

ILD45 7210 150 0050 2 ILD45 7210 150 0050 3 ILD45 7210 150 0050 4 150 x 50 mm (6”x2”)

ILD45 7210 150 0075 2 ILD45 7210 150 0075 3 ILD45 7210 150 0075 4 150 x 75 mm (6”x3”)

ILD45 7210 150 0100 2 ILD45 7210 150 0100 3 ILD45 7210 150 0100 4 150 x 100 mm (6”x4”)

ILD45 7210 150 0150 2 ILD45 7210 150 0150 3 ILD45 7210 150 0150 4 150 x 150 mm (6”x6”)

ILD45 7210 200 0100 2 ILD45 7210 200 0100 3 ILD45 7210 200 0100 4 200 x 100 mm (8”x4”)

ILD45 7210 300 0100 2 ILD45 7210 300 0100 3 ILD45 7210 300 0100 4 300 x 100 mm (12”x4”)

ILD45 7210 450 0100 2 ILD45 7210 450 0100 3 ILD45 7210 450 0100 4 450 x 100 mm (18”x4”)

ILD45 7210 600 0100 2 ILD45 7210 600 0100 3 ILD45 7210 600 0100 4 600 x 100 mm (24”x4”)



ILT45 7210 050 0050 2 ILT45 7210 050 0050 3 ILT45 7210 050 0050 4 50 x 50 mm (2”x2”)

ILT45 7210 075 0050 2 ILT45 7210 075 0050 3 ILT45 7210 075 0050 4 75 x 50 mm (3”x2”)

ILT45 7210 075 0075 2 ILT45 7210 075 0075 3 ILT45 7210 075 0075 4 75 x 75 mm (3”x3”)

ILT45 7210 100 0050 2 ILT45 7210 100 0050 3 ILT45 7210 100 0050 4 100 x 50 mm (4”x2”)

ILT45 7210 100 0075 2 ILT45 7210 100 0075 3 ILT45 7210 100 0075 4 100 x 75 mm (4”x3”)

ILT45 7210 100 0100 2 ILT45 7210 100 0100 3 ILT45 7210 100 0100 4 100 x 100 mm (4”x4”)

ILT45 7210 150 0050 2 ILT45 7210 150 0050 3 ILT45 7210 150 0050 4 150 x 50 mm (6”x2”)

ILT45 7210 150 0075 2 ILT45 7210 150 0075 3 ILT45 7210 150 0075 4 150 x 75 mm (6”x3”)

ILT45 7210 150 0100 2 ILT45 7210 150 0100 3 ILT45 7210 150 0100 4 150 x 100 mm (6”x4”)

ILT45 7210 150 0150 2 ILT45 7210 150 0150 3 ILT45 7210 150 0150 4 150 x 150 mm (6”x6”)

ILT45 7210 200 0100 2 ILT45 7210 200 0100 3 ILT45 7210 200 0100 4 200 x 100 mm (8”x4”)

ILT45 7210 300 0100 2 ILT45 7210 300 0100 3 ILT45 7210 300 0100 4 300 x 100 mm (12”x4”)

ILT45 7210 450 0100 2 ILT45 7210 450 0100 3 ILT45 7210 450 0100 4 450 x 100 mm (18”x4”)

ILT45 7210 600 0100 2 ILT45 7210 600 0100 3 ILT45 7210 600 0100 4 600 x 100 mm (24”x4”)



28

Type 1: inside

Type 2: outside



BEND 45 ° OUTSIDE LID

BEND 45 ° OUTSIDE LID DOUBLE

OL45 7310

OLD45 7310



OL45 7310 050 0050 2 OL45 7310 050 0050 3 OL45 7310 050 0050 4 50 x 50 mm (2”x2”)

OL45 7310 075 0050 2 OL45 7310 075 0050 3 OL45 7310 075 0050 4 75 x 50 mm (3”x2”)

OL45 7310 075 0075 2 OL45 7310 075 0075 3 OL45 7310 075 0075 4 75 x 75 mm (3”x3”)

OL45 7310 100 0050 2 OL45 7310 100 0050 3 OL45 7310 100 0050 4 100 x 50 mm (4”x2”)

OL45 7310 100 0075 2 OL45 7310 100 0075 3 OL45 7310 100 0075 4 100 x 75 mm (4”x3”)

OL45 7310 100 0100 2 OL45 7310 100 0100 3 OL45 7310 100 0100 4 100 x 100 mm (4”x4”)

OL45 7310 150 0050 2 OL45 7310 150 0050 3 OL45 7310 150 0050 4 150 x 50 mm (6”x2”)

OL45 7310 150 0075 2 OL45 7310 150 0075 3 OL45 7310 150 0075 4 150 x 75 mm (6”x3”)

OL45 7310 150 0100 2 OL45 7310 150 0100 3 OL45 7310 150 0100 4 150 x 100 mm (6”x4”)

OL45 7310 150 0150 2 OL45 7310 150 0150 3 OL45 7310 150 0150 4 150 x 150 mm (6”x6”)

OL45 7310 200 0100 2 OL45 7310 200 0100 3 OL45 7310 200 0100 4 200 x 100 mm (8”x4”)

OL45 7310 300 0100 2 OL45 7310 300 0100 3 OL45 7310 300 0100 4 300 x 100 mm (12”x4”)

OL45 7310 450 0100 2 OL45 7310 450 0100 3 OL45 7310 450 0100 4 450 x 100 mm (18”x4”)

OL45 7310 600 0100 2 OL45 7310 600 0100 3 OL45 7310 600 0100 4 600 x 100 mm (24”x4”)



OLD45 7310 050 0050 2 OLD45 7310 050 0050 3 OLD45 7310 050 0050 4 50 x 50 mm (2”x2”)

OLD45 7310 075 0050 2 OLD45 7310 075 0050 3 OLD45 7310 075 0050 4 75 x 50 mm (3”x2”)

OLD45 7310 075 0075 2 OLD45 7310 075 0075 3 OLD45 7310 075 0075 4 75 x 75 mm (3”x3”)

OLD45 7310 100 0050 2 OLD45 7310 100 0050 3 OLD45 7310 100 0050 4 100 x 50 mm (4”x2”)

OLD45 7310 100 0075 2 OLD45 7310 100 0075 3 OLD45 7310 100 0075 4 100 x 75 mm (4”x3”)

OLD45 7310 100 0100 2 OLD45 7310 100 0100 3 OLD45 7310 100 0100 4 100 x 100 mm (4”x4”)

OLD45 7310 150 0050 2 OLD45 7310 150 0050 3 OLD45 7310 150 0050 4 150 x 50 mm (6”x2”)

OLD45 7310 150 0075 2 OLD45 7310 150 0075 3 OLD45 7310 150 0075 4 150 x 75 mm (6”x3”)

OLD45 7310 150 0100 2 OLD45 7310 150 0100 3 OLD45 7310 150 0100 4 150 x 100 mm (6”x4”)

OLD45 7310 150 0150 2 OLD45 7310 150 0150 3 OLD45 7310 150 0150 4 150 x 150 mm (6”x6”)

OLD45 7310 200 0100 2 OLD45 7310 200 0100 3 OLD45 7310 200 0100 4 200 x 100 mm (8”x4”)

OLD45 7310 300 0100 2 OLD45 7310 300 0100 3 OLD45 7310 300 0100 4 300 x 100 mm (12”x4”)

OLD45 7310 450 0100 2 OLD45 7310 450 0100 3 OLD45 7310 450 0100 4 450 x 100 mm (18”x4”)

OLD45 7310 600 0100 2 OLD45 7310 600 0100 3 OLD45 7310 600 0100 4 600 x 100 mm (24”x4”)



H H

W W

H H

W W

29

TL90 7410 CCornered

Type 1: inside

Type 2: outside



BEND 90 ° TOP LID

BEND 45 ° OUTSIDE LID TRIPLE

TL90 7410

OLT45 7310



TL90 7410 050 0050 2 TL90 7410 050 0050 3 TL90 7410 050 0050 4 50 x 50 mm (2”x2”)

TL90 7410 075 0050 2 TL90 7410 075 0050 3 TL90 7410 075 0050 4 75 x 50 mm (3”x2”)

TL90 7410 075 0075 2 TL90 7410 075 0075 3 TL90 7410 075 0075 4 75 x 75 mm (3”x3”)

TL90 7410 100 0050 2 TL90 7410 100 0050 3 TL90 7410 100 0050 4 100 x 50 mm (4”x2”)

TL90 7410 100 0075 2 TL90 7410 100 0075 3 TL90 7410 100 0075 4 100 x 75 mm (4”x3”)

TL90 7410 100 0100 2 TL90 7410 100 0100 3 TL90 7410 100 0100 4 100 x 100 mm (4”x4”)

TL90 7410 150 0050 2 TL90 7410 150 0050 3 TL90 7410 150 0050 4 150 x 50 mm (6”x2”)

TL90 7410 150 0075 2 TL90 7410 150 0075 3 TL90 7410 150 0075 4 150 x 75 mm (6”x3”)

TL90 7410 150 0100 2 TL90 7410 150 0100 3 TL90 7410 150 0100 4 150 x 100 mm (6”x4”)

TL90 7410 150 0150 2 TL90 7410 150 0150 3 TL90 7410 150 0150 4 150 x 150 mm (6”x6”)

TL90 7410 200 0100 2 TL90 7410 200 0100 3 TL90 7410 200 0100 4 200 x 100 mm (8”x4”)

TL90 7410 300 0100 2 TL90 7410 300 0100 3 TL90 7410 300 0100 4 300 x 100 mm (12”x4”)

TL90 7410 450 0100 2 TL90 7410 450 0100 3 TL90 7410 450 0100 4 450 x 100 mm (18”x4”)

TL90 7410 600 0100 2 TL90 7410 600 0100 3 TL90 7410 600 0100 4 600 x 100 mm (24”x4”)



OLT45 7310 050 0050 2 OLT45 7310 050 0050 3 OLT45 7310 050 0050 4 50 x 50 mm (2”x2”)

OLT45 7310 075 0050 2 OLT45 7310 075 0050 3 OLT45 7310 075 0050 4 75 x 50 mm (3”x2”)

OLT45 7310 075 0075 2 OLT45 7310 075 0075 3 OLT45 7310 075 0075 4 75 x 75 mm (3”x3”)

OLT45 7310 100 0050 2 OLT45 7310 100 0050 3 OLT45 7310 100 0050 4 100 x 50 mm (4”x2”)

OLT45 7310 100 0075 2 OLT45 7310 100 0075 3 OLT45 7310 100 0075 4 100 x 75 mm (4”x3”)

OLT45 7310 100 0100 2 OLT45 7310 100 0100 3 OLT45 7310 100 0100 4 100 x 100 mm (4”x4”)

OLT45 7310 150 0050 2 OLT45 7310 150 0050 3 OLT45 7310 150 0050 4 150 x 50 mm (6”x2”)

OLT45 7310 150 0075 2 OLT45 7310 150 0075 3 OLT45 7310 150 0075 4 150 x 75 mm (6”x3”)

OLT45 7310 150 0100 2 OLT45 7310 150 0100 3 OLT45 7310 150 0100 4 150 x 100 mm (6”x4”)

OLT45 7310 150 0150 2 OLT45 7310 150 0150 3 OLT45 7310 150 0150 4 150 x 150 mm (6”x6”)

OLT45 7310 200 0100 2 OLT45 7310 200 0100 3 OLT45 7310 200 0100 4 200 x 100 mm (8”x4”)

OLT45 7310 300 0100 2 OLT45 7310 300 0100 3 OLT45 7310 300 0100 4 300 x 100 mm (12”x4”)

OLT45 7310 450 0100 2 OLT45 7310 450 0100 3 OLT45 7310 450 0100 4 450 x 100 mm (18”x4”)

OLT45 7310 600 0100 2 OLT45 7310 600 0100 3 OLT45 7310 600 0100 4 600 x 100 mm (24”x4”)



H H

W W

H H

W W

30



BEND 90 ° TOP LID DOUBLE

BEND 90 ° TOP LID TRIPLE

TLD90 7410

TLT90 7410



TLD90 7410 050 0050 2 TLD90 7410 050 0050 3 TLD90 7410 050 0050 4 50 x 50 mm (2”x2”)

TLD90 7410 075 0050 2 TLD90 7410 075 0050 3 TLD90 7410 075 0050 4 75 x 50 mm (3”x2”)

TLD90 7410 075 0075 2 TLD90 7410 075 0075 3 TLD90 7410 075 0075 4 75 x 75 mm (3”x3”)

TLD90 7410 100 0050 2 TLD90 7410 100 0050 3 TLD90 7410 100 0050 4 100 x 50 mm (4”x2”)

TLD90 7410 100 0075 2 TLD90 7410 100 0075 3 TLD90 7410 100 0075 4 100 x 75 mm (4”x3”)

TLD90 7410 100 0100 2 TLD90 7410 100 0100 3 TLD90 7410 100 0100 4 100 x 100 mm (4”x4”)

TLD90 7410 150 0050 2 TLD90 7410 150 0050 3 TLD90 7410 150 0050 4 150 x 50 mm (6”x2”)

TLD90 7410 150 0075 2 TLD90 7410 150 0075 3 TLD90 7410 150 0075 4 150 x 75 mm (6”x3”)

TLD90 7410 150 0100 2 TLD90 7410 150 0100 3 TLD90 7410 150 0100 4 150 x 100 mm (6”x4”)

TLD90 7410 150 0150 2 TLD90 7410 150 0150 3 TLD90 7410 150 0150 4 150 x 150 mm (6”x6”)

TLD90 7410 200 0100 2 TLD90 7410 200 0100 3 TLD90 7410 200 0100 4 200 x 100 mm (8”x4”)

TLD90 7410 300 0100 2 TLD90 7410 300 0100 3 TLD90 7410 300 0100 4 300 x 100 mm (12”x4”)

TLD90 7410 450 0100 2 TLD90 7410 450 0100 3 TLD90 7410 450 0100 4 450 x 100 mm (18”x4”)

TLD90 7410 600 0100 2 TLD90 7410 600 0100 3 TLD90 7410 600 0100 4 600 x 100 mm (24”x4”)



TLT90 7410 050 0050 2 TLT90 7410 050 0050 3 TLT90 7410 050 0050 4 50 x 50 mm (2”x2”)

TLT90 7410 075 0050 2 TLT90 7410 075 0050 3 TLT90 7410 075 0050 4 75 x 50 mm (3”x2”)

TLT90 7410 075 0075 2 TLT90 7410 075 0075 3 TLT90 7410 075 0075 4 75 x 75 mm (3”x3”)

TLT90 7410 100 0050 2 TLT90 7410 100 0050 3 TLT90 7410 100 0050 4 100 x 50 mm (4”x2”)

TLT90 7410 100 0075 2 TLT90 7410 100 0075 3 TLT90 7410 100 0075 4 100 x 75 mm (4”x3”)

TLT90 7410 100 0100 2 TLT90 7410 100 0100 3 TLT90 7410 100 0100 4 100 x 100 mm (4”x4”)

TLT90 7410 150 0050 2 TLT90 7410 150 0050 3 TLT90 7410 150 0050 4 150 x 50 mm (6”x2”)

TLT90 7410 150 0075 2 TLT90 7410 150 0075 3 TLT90 7410 150 0075 4 150 x 75 mm (6”x3”)

TLT90 7410 150 0100 2 TLT90 7410 150 0100 3 TLT90 7410 150 0100 4 150 x 100 mm (6”x4”)

TLT90 7410 150 0150 2 TLT90 7410 150 0150 3 TLT90 7410 150 0150 4 150 x 150 mm (6”x6”)

TLT90 7410 200 0100 2 TLT90 7410 200 0100 3 TLT90 7410 200 0100 4 200 x 100 mm (8”x4”)

TLT90 7410 300 0100 2 TLT90 7410 300 0100 3 TLT90 7410 300 0100 4 300 x 100 mm (12”x4”)

TLT90 7410 450 0100 2 TLT90 7410 450 0100 3 TLT90 7410 450 0100 4 450 x 100 mm (18”x4”)

TLT90 7410 600 0100 2 TLT90 7410 600 0100 3 TLT90 7410 600 0100 4 600 x 100 mm (24”x4”)



31

Type 1: inside

Type 2: outside



BEND 90 ° INSIDE LID


IL90 7510

IL90 7510



IL90 7510 050 0050 2 IL90 7510 050 0050 3 IL90 7510 050 0050 4 50 x 50 mm (2”x2”)

IL90 7510 075 0050 2 IL90 7510 075 0050 3 IL90 7510 075 0050 4 75 x 50 mm (3”x2”)

IL90 7510 075 0075 2 IL90 7510 075 0075 3 IL90 7510 075 0075 4 75 x 75 mm (3”x3”)

IL90 7510 100 0050 2 IL90 7510 100 0050 3 IL90 7510 100 0050 4 100 x 50 mm (4”x2”)

IL90 7510 100 0075 2 IL90 7510 100 0075 3 IL90 7510 100 0075 4 100 x 75 mm (4”x3”)

IL90 7510 100 0100 2 IL90 7510 100 0100 3 IL90 7510 100 0100 4 100 x 100 mm (4”x4”)

IL90 7510 150 0050 2 IL90 7510 150 0050 3 IL90 7510 150 0050 4 150 x 50 mm (6”x2”)

IL90 7510 150 0075 2 IL90 7510 150 0075 3 IL90 7510 150 0075 4 150 x 75 mm (6”x3”)

IL90 7510 150 0100 2 IL90 7510 150 0100 3 IL90 7510 150 0100 4 150 x 100 mm (6”x4”)

IL90 7510 150 0150 2 IL90 7510 150 0150 3 IL90 7510 150 0150 4 150 x 150 mm (6”x6”)

IL90 7510 200 0100 2 IL90 7510 200 0100 3 IL90 7510 200 0100 4 200 x 100 mm (8”x4”)

IL90 7510 300 0100 2 IL90 7510 300 0100 3 IL90 7510 300 0100 4 300 x 100 mm (12”x4”)

IL90 7510 450 0100 2 IL90 7510 450 0100 3 IL90 7510 450 0100 4 450 x 100 mm (18”x4”)

IL90 7510 600 0100 2 IL90 7510 600 0100 3 IL90 7510 600 0100 4 600 x 100 mm (24”x4”)



ILD90 7510 050 0050 2 ILD90 7510 050 0050 3 ILD90 7510 050 0050 4 50 x 50 mm (2”x2”)

ILD90 7510 075 0050 2 ILD90 7510 075 0050 3 ILD90 7510 075 0050 4 75 x 50 mm (3”x2”)

ILD90 7510 075 0075 2 ILD90 7510 075 0075 3 ILD90 7510 075 0075 4 75 x 75 mm (3”x3”)

ILD90 7510 100 0050 2 ILD90 7510 100 0050 3 ILD90 7510 100 0050 4 100 x 50 mm (4”x2”)

ILD90 7510 100 0075 2 ILD90 7510 100 0075 3 ILD90 7510 100 0075 4 100 x 75 mm (4”x3”)

ILD90 7510 100 0100 2 ILD90 7510 100 0100 3 ILD90 7510 100 0100 4 100 x 100 mm (4”x4”)

ILD90 7510 150 0050 2 ILD90 7510 150 0050 3 ILD90 7510 150 0050 4 150 x 50 mm (6”x2”)

ILD90 7510 150 0075 2 ILD90 7510 150 0075 3 ILD90 7510 150 0075 4 150 x 75 mm (6”x3”)

ILD90 7510 150 0100 2 ILD90 7510 150 0100 3 ILD90 7510 150 0100 4 150 x 100 mm (6”x4”)

ILD90 7510 150 0150 2 ILD90 7510 150 0150 3 ILD90 7510 150 0150 4 150 x 150 mm (6”x6”)

ILD90 7510 200 0100 2 ILD90 7510 200 0100 3 ILD90 7510 200 0100 4 200 x 100 mm (8”x4”)

ILD90 7510 300 0100 2 ILD90 7510 300 0100 3 ILD90 7510 300 0100 4 300 x 100 mm (12”x4”)

ILD90 7510 450 0100 2 ILD90 7510 450 0100 3 ILD90 7510 450 0100 4 450 x 100 mm (18”x4”)

ILD90 7510 600 0100 2 ILD90 7510 600 0100 3 ILD90 7510 600 0100 4 600 x 100 mm (24”x4”)



H H

W W

H H

W W

32




BEND 90 ° OUTSIDE LID

ILT90 7510

OL90 7610



ILT90 7510 050 0050 2 ILT90 7510 050 0050 3 ILT90 7510 050 0050 4 50 x 50 mm (2”x2”)

ILT90 7510 075 0050 2 ILT90 7510 075 0050 3 ILT90 7510 075 0050 4 75 x 50 mm (3”x2”)

ILT90 7510 075 0075 2 ILT90 7510 075 0075 3 ILT90 7510 075 0075 4 75 x 75 mm (3”x3”)

ILT90 7510 100 0050 2 ILT90 7510 100 0050 3 ILT90 7510 100 0050 4 100 x 50 mm (4”x2”)

ILT90 7510 100 0075 2 ILT90 7510 100 0075 3 ILT90 7510 100 0075 4 100 x 75 mm (4”x3”)

ILT90 7510 100 0100 2 ILT90 7510 100 0100 3 ILT90 7510 100 0100 4 100 x 100 mm (4”x4”)

ILT90 7510 150 0050 2 ILT90 7510 150 0050 3 ILT90 7510 150 0050 4 150 x 50 mm (6”x2”)

ILT90 7510 150 0075 2 ILT90 7510 150 0075 3 ILT90 7510 150 0075 4 150 x 75 mm (6”x3”)

ILT90 7510 150 0100 2 ILT90 7510 150 0100 3 ILT90 7510 150 0100 4 150 x 100 mm (6”x4”)

ILT90 7510 150 0150 2 ILT90 7510 150 0150 3 ILT90 7510 150 0150 4 150 x 150 mm (6”x6”)

ILT90 7510 200 0100 2 ILT90 7510 200 0100 3 ILT90 7510 200 0100 4 200 x 100 mm (8”x4”)

ILT90 7510 300 0100 2 ILT90 7510 300 0100 3 ILT90 7510 300 0100 4 300 x 100 mm (12”x4”)

ILT90 7510 450 0100 2 ILT90 7510 450 0100 3 ILT90 7510 450 0100 4 450 x 100 mm (18”x4”)

ILT90 7510 600 0100 2 ILT90 7510 600 0100 3 ILT90 7510 600 0100 4 600 x 100 mm (24”x4”)



OL90 7610 050 0050 2 OL90 7610 050 0050 3 OL90 7610 050 0050 4 50 x 50 mm (2”x2”)

OL90 7610 075 0050 2 OL90 7610 075 0050 3 OL90 7610 075 0050 4 75 x 50 mm (3”x2”)

OL90 7610 075 0075 2 OL90 7610 075 0075 3 OL90 7610 075 0075 4 75 x 75 mm (3”x3”)

OL90 7610 100 0050 2 OL90 7610 100 0050 3 OL90 7610 100 0050 4 100 x 50 mm (4”x2”)

OL90 7610 100 0075 2 OL90 7610 100 0075 3 OL90 7610 100 0075 4 100 x 75 mm (4”x3”)

OL90 7610 100 0100 2 OL90 7610 100 0100 3 OL90 7610 100 0100 4 100 x 100 mm (4”x4”)

OL90 7610 150 0050 2 OL90 7610 150 0050 3 OL90 7610 150 0050 4 150 x 50 mm (6”x2”)

OL90 7610 150 0075 2 OL90 7610 150 0075 3 OL90 7610 150 0075 4 150 x 75 mm (6”x3”)

OL90 7610 150 0100 2 OL90 7610 150 0100 3 OL90 7610 150 0100 4 150 x 100 mm (6”x4”)

OL90 7610 150 0150 2 OL90 7610 150 0150 3 OL90 7610 150 0150 4 150 x 150 mm (6”x6”)

OL90 7610 200 0100 2 OL90 7610 200 0100 3 OL90 7610 200 0100 4 200 x 100 mm (8”x4”)

OL90 7610 300 0100 2 OL90 7610 300 0100 3 OL90 7610 300 0100 4 300 x 100 mm (12”x4”)

OL90 7610 450 0100 2 OL90 7610 450 0100 3 OL90 7610 450 0100 4 450 x 100 mm (18”x4”)

OL90 7610 600 0100 2 OL90 7610 600 0100 3 OL90 7610 600 0100 4 600 x 100 mm (24”x4”)



Type 1: inside

Type 2: outside

H H

W W

H H

W W

33



BEND 90 ° OUTSIDE LID DOUBLE

BEND 90 ° OUTSIDE LID TRIPLE

OLD90 7610

OLT90 7610



OLD90 7610 050 0050 2 OLD90 7610 050 0050 3 OLD90 7610 050 0050 4 50 x 50 mm (2”x2”)

OLD90 7610 075 0050 2 OLD90 7610 075 0050 3 OLD90 7610 075 0050 4 75 x 50 mm (3”x2”)

OLD90 7610 075 0075 2 OLD90 7610 075 0075 3 OLD90 7610 075 0075 4 75 x 75 mm (3”x3”)

OLD90 7610 100 0050 2 OLD90 7610 100 0050 3 OLD90 7610 100 0050 4 100 x 50 mm (4”x2”)

OLD90 7610 100 0075 2 OLD90 7610 100 0075 3 OLD90 7610 100 0075 4 100 x 75 mm (4”x3”)

OLD90 7610 100 0100 2 OLD90 7610 100 0100 3 OLD90 7610 100 0100 4 100 x 100 mm (4”x4”)

OLD90 7610 150 0050 2 OLD90 7610 150 0050 3 OLD90 7610 150 0050 4 150 x 50 mm (6”x2”)

OLD90 7610 150 0075 2 OLD90 7610 150 0075 3 OLD90 7610 150 0075 4 150 x 75 mm (6”x3”)

OLD90 7610 150 0100 2 OLD90 7610 150 0100 3 OLD90 7610 150 0100 4 150 x 100 mm (6”x4”)

OLD90 7610 150 0150 2 OLD90 7610 150 0150 3 OLD90 7610 150 0150 4 150 x 150 mm (6”x6”)

OLD90 7610 200 0100 2 OLD90 7610 200 0100 3 OLD90 7610 200 0100 4 200 x 100 mm (8”x4”)

OLD90 7610 300 0100 2 OLD90 7610 300 0100 3 OLD90 7610 300 0100 4 300 x 100 mm (12”x4”)

OLD90 7610 450 0100 2 OLD90 7610 450 0100 3 OLD90 7610 450 0100 4 450 x 100 mm (18”x4”)

OLD90 7610 600 0100 2 OLD90 7610 600 0100 3 OLD90 7610 600 0100 4 600 x 100 mm (24”x4”)



OLT90 7610 050 0050 2 OLT90 7610 050 0050 3 OLT90 7610 050 0050 4 50 x 50 mm (2”x2”)

OLT90 7610 075 0050 2 OLT90 7610 075 0050 3 OLT90 7610 075 0050 4 75 x 50 mm (3”x2”)

OLT90 7610 075 0075 2 OLT90 7610 075 0075 3 OLT90 7610 075 0075 4 75 x 75 mm (3”x3”)

OLT90 7610 100 0050 2 OLT90 7610 100 0050 3 OLT90 7610 100 0050 4 100 x 50 mm (4”x2”)

OLT90 7610 100 0075 2 OLT90 7610 100 0075 3 OLT90 7610 100 0075 4 100 x 75 mm (4”x3”)

OLT90 7610 100 0100 2 OLT90 7610 100 0100 3 OLT90 7610 100 0100 4 100 x 100 mm (4”x4”)

OLT90 7610 150 0050 2 OLT90 7610 150 0050 3 OLT90 7610 150 0050 4 150 x 50 mm (6”x2”)

OLT90 7610 150 0075 2 OLT90 7610 150 0075 3 OLT90 7610 150 0075 4 150 x 75 mm (6”x3”)

OLT90 7610 150 0100 2 OLT90 7610 150 0100 3 OLT90 7610 150 0100 4 150 x 100 mm (6”x4”)

OLT90 7610 150 0150 2 OLT90 7610 150 0150 3 OLT90 7610 150 0150 4 150 x 150 mm (6”x6”)

OLT90 7610 200 0100 2 OLT90 7610 200 0100 3 OLT90 7610 200 0100 4 200 x 100 mm (8”x4”)

OLT90 7610 300 0100 2 OLT90 7610 300 0100 3 OLT90 7610 300 0100 4 300 x 100 mm (12”x4”)

OLT90 7610 450 0100 2 OLT90 7610 450 0100 3 OLT90 7610 450 0100 4 450 x 100 mm (18”x4”)

OLT90 7610 600 0100 2 OLT90 7610 600 0100 3 OLT90 7610 600 0100 4 600 x 100 mm (24”x4”)



34

Type 1: inside

Type 2: outside



TEE BEND TOP LID

TEE BEND TOP LID DOUBLE

TBTL 7710

TBTLD 7710



TBTL 7710 050 0050 2 TBTL 7710 050 0050 3 TBTL 7710 050 0050 4 50 x 50 mm (2”x2”)
















TBTLD 7710 050 0050 2 TBTLD 7710 050 0050 3 TBTLD 7710 050 0050 4 50 x 50 mm (2”x2”)
















H H

W W

H H

W W

35

Type 1: inside

Type 2: outside



TEE BEND INSIDE LID

TEE BEND TOP LID TRIPLE

TBIL 7810

TBTLT 7710



TBIL 7810 050 0050 2 TBIL 7810 050 0050 3 TBIL 7810 050 0050 4 50 x 50 mm (2”x2”)
















TBTLT 7710 050 0050 2 TBTLT 7710 050 0050 3 TBTLT 7710 050 0050 4 50 x 50 mm (2”x2”)


TBTLT7710 075 0075 2 TBTLT 7710 075 0075 3 TBTLT 7710 075 0075 4 75 x 75 mm (3”x3”)














H H

W W

H H

W W

36

Type 1: inside

Type 1: inside

Type 2: outside

Type 2: outside



TEE BEND INSIDE LID DOUBLE

TEE BEND INSIDE LID TRIPLE

TBILD 7810

TBILT 7810



TBILD 7810 050 0050 2 TBILD 7810 050 0050 3 TBILD 7810 050 0050 4 50 x 50 mm (2”x2”)
















TBILT 7810 050 0050 2 TBILT 7810 050 0050 3 TBILT 7810 050 0050 4 50 x 50 mm (2”x2”)
















H H

W W

H H

W W

H H

W W

H H

W W

37



TEE BEND OUTSIDE LID

TEE BEND OUTSIDE LID DOUBLE

TBOL 7910

TBOLD 7910



TBOL 7910 050 0050 2 TBOL 7910 050 0050 3 TBOL 7910 050 0050 4 50 x 50 mm (2”x2”)
















TBOLD 7910 050 0050 2 TBOLD 7910 050 0050 3 TBOLD 7910 050 0050 4 50 x 50 mm (2”x2”)
















38



TEE BEND OUTSIDE LID TRIPLE

INTERSECTION

TBOLT 7910

IF 8010



TBOLT 7910 050 0050 2 TBOLT 7910 050 0050 3 TBOLT 7915 050 0050 4 50 x 50 mm (2”x2”)
















IF 8010 050 0050 2 IF 8010 050 0050 3 IF 8010 050 0050 4 50 x 50 mm (2”x2”)

IF 8010 075 0050 2 IF 8010 075 0050 3 IF 8010 075 0050 4 75 x 50 mm (3”x2”)

IF 8010 075 0075 2 IF 8010 075 0075 3 IF 8010 075 0075 4 75 x 75 mm (3”x3”)

IF 8010 100 0050 2 IF 8010 100 0050 3 IF 8010 100 0050 4 100 x 50 mm (4”x2”)

IF 8010 100 0075 2 IF 8010 100 0075 3 IF 8010 100 0075 4 100 x 75 mm (4”x3”)

IF 8010 100 0100 2 IF 8010 100 0100 3 IF 8010 100 0100 4 100 x 100 mm (4”x4”)

IF 8010 150 0050 2 IF 8010 150 0050 3 IF 8010 150 0050 4 150 x 50 mm (6”x2”)

IF 8010 150 0075 2 IF 8010 150 0075 3 IF 8010 150 0075 4 150 x 75 mm (6”x3”)

IF 8010 150 0100 2 IF 8010 150 0100 3 IF 8010 150 0100 4 150 x 100 mm (6”x4”)

IF 8010 150 0150 2 IF 8010 150 0150 3 IF 8010 150 0150 4 150 x 150 mm (6”x6”)

IF 8010 200 0100 2 IF 8010 200 0100 3 IF 8010 200 0100 4 200 x 100 mm (8”x4”)

IF 8010 300 0100 2 IF 8010 300 0100 3 IF 8010 300 0100 4 300 x 100 mm (12”x4”)

IF 8010 450 0100 2 IF 8010 450 0100 3 IF 8010 450 0100 4 450 x 100 mm (18”x4”)

IF 8010 600 0100 2 IF 8010 600 0100 3 IF 8010 600 0100 4 600 x 100 mm (24”x4”)



39



INTERSECTION DOUBLE

INTERSECTION TRIPLE

IFD 8010

IFT 8010



IFD 8010 050 0050 2 IFD 8010 050 0050 3 IFD 8010 050 0050 4 50 x 50 mm (2”x2”)

IFD 8010 075 0050 2 IFD 8010 075 0050 3 IFD 8010 075 0050 4 75 x 50 mm (3”x2”)

IFD 8010 075 0075 2 IFD 8010 075 0075 3 IFD 8010 075 0075 4 75 x 75 mm (3”x3”)

IFD 8010 100 0050 2 IFD 8010 100 0050 3 IFD 8010 100 0050 4 100 x 50 mm (4”x2”)

IFD 8010 100 0075 2 IFD 8010 100 0075 3 IFD 8010 100 0075 4 100 x 75 mm (4”x3”)

IFD 8010 100 0100 2 IFD 8010 100 0100 3 IFD 8010 100 0100 4 100 x 100 mm (4”x4”)

IFD 8010 150 0050 2 IFD 8010 150 0050 3 IFD 8010 150 0050 4 150 x 50 mm (6”x2”)

IFD 8010 150 0075 2 IFD 8010 150 0075 3 IFD 8010 150 0075 4 150 x 75 mm (6”x3”)

IFD 8010 150 0100 2 IFD 8010 150 0100 3 IFD 8010 150 0100 4 150 x 100 mm (6”x4”)

IFD 8010 150 0150 2 IFD 8010 150 0150 3 IFD 8010 150 0150 4 150 x 150 mm (6”x6”)

IFD 8010 200 0100 2 IFD 8010 200 0100 3 IFD 8010 200 0100 4 200 x 100 mm (8”x4”)

IFD 8010 300 0100 2 IFD 8010 300 0100 3 IFD 8010 300 0100 4 300 x 100 mm (12”x4”)

IFD 8010 450 0100 2 IFD 8010 450 0100 3 IFD 8010 450 0100 4 450 x 100 mm (18”x4”)

IFD 8010 600 0100 2 IFD 8010 600 0100 3 IFD 8010 600 0100 4 600 x 100 mm (24”x4”)



IFT 8010 050 0050 2 IFT 8010 050 0050 3 IFT 8010 050 0050 4 50 x 50 mm (2”x2”)

IFT 8010 075 0050 2 IFT 8010 075 0050 3 IFT 8010 075 0050 4 75 x 50 mm (3”x2”)

IFT 8010 075 0075 2 IFT 8010 075 0075 3 IFT 8010 075 0075 4 75 x 75 mm (3”x3”)

IFT 8010 100 0050 2 IFT 8010 100 0050 3 IFT 8010 100 0050 4 100 x 50 mm (4”x2”)

IFT 8010 100 0075 2 IFT 8010 100 0075 3 IFT 8010 100 0075 4 100 x 75 mm (4”x3”)

IFT 8010 100 0100 2 IFT 8010 100 0100 3 IFT 8010 100 0100 4 100 x 100 mm (4”x4”)

IFT 8010 150 0050 2 IFT 8010 150 0050 3 IFT 8010 150 0050 4 150 x 50 mm (6”x2”)

IFT 8010 150 0075 2 IFT 8010 150 0075 3 IFT 8010 150 0075 4 150 x 75 mm (6”x3”)

IFT 8010 150 0100 2 IFT 8010 150 0100 3 IFT 8010 150 0100 4 150 x 100 mm (6”x4”)

IFT 8010 150 0150 2 IFT 8010 150 0150 3 IFT 8010 150 0150 4 150 x 150 mm (6”x6”)

IFT 8010 200 0100 2 IFT 8010 200 0100 3 IFT 8010 200 0100 4 200 x 100 mm (8”x4”)

IFT 8010 300 0100 2 IFT 8010 300 0100 3 IFT 8010 300 0100 4 300 x 100 mm (12”x4”)

IFT 8010 450 0100 2 IFT 8010 450 0100 3 IFT 8010 450 0100 4 450 x 100 mm (18”x4”)

IFT 8010 600 0100 2 IFT 8010 600 0100 3 IFT 8010 600 0100 4 600 x 100 mm (24”x4”)



40

Central Half SingleCR2 9010 - 9015

Central Half DoubleCR2D 9010 - 9015

Central Half TripleCR2T 9010 - 9015

Central Reducer SingleCRS 9010 - 9015

Central Reducer DoubleCRD 9010 - 9015

Central Reducer TripleCRT 9010 - 9015

Right Reducer

Central Right ReducerCRR 9010 - 9015

Type 1: inside

Type 2: outside

Reducers are usually manufactured to fit all available trunking sizes and required reduction.

REDUCERS

CR 9010 - 9015


1 mm 1.2 mm 1.5 mm mm

CR 9010 075 0050 2 CR 9010 075 0050 3 CR 9010 075 0050 4 75 x 75 mm - 50 x 50 mm

CR 9010 100 0050 2 CR 9010 100 0050 3 CR 9010 100 0050 4 100 x 100 mm - 100 x 50 mm

CR 9010 100 0075 2 CR 9010 100 0075 3 CR 9010 100 0075 4 100 x 100 mm - 75 x 75 mm

CR 9010 100 0050 2 CR 9010 100 0050 3 CR 9010 100 0050 4 100 x 100 mm - 50 x 50 mm

CR 9010 150 0050 2 CR 9010 150 0050 3 CR 9010 150 0050 4 150 x 150 mm - 50 x 50 mm

CR 9010 150 0075 2 CR 9010 150 0075 3 CR 9010 150 0075 4 150 x 150 mm - 75 x 75 mm

CR 9010 150 0100 2 CR 9010 150 0100 3 CR 9010 150 0100 4 150 x 150 mm - 100 x 100 mm

CR 9010 200 0100 2 CR 9010 200 0100 3 CR 9010 200 0100 4 200 x 100 mm - 100 x 100 mm

CR 9010 200 0150 2 CR 9010 200 0150 3 CR 9010 200 0150 4 200 x 100 mm - 150 x 100 mm

CR 9010 300 0200 2 CR 9010 300 0200 3 CR 9010 300 0200 4 300 x 100 mm - 100 x 100 mm

CR 9010 300 0150 2 CR 9010 300 0150 3 CR 9010 300 0150 4 300 x 100 mm - 150 x 100 mm

CR 9010 300 0100 2 CR 9010 300 0100 3 CR 9010 300 0100 4 300 x 100 mm - 100 x 100 mm

CR 9010 450 0300 2 CR 9010 450 0300 3 CR 9010 450 0300 4 450 x 100 mm - 300 x 100 mm

CR 9010 450 0200 2 CR 9010 450 0200 3 CR 9010 450 0200 4 450 x 100 mm - 200 x 100 mm

CR 9010 450 0100 2 CR 9010 450 0100 3 CR 9010 450 0100 4 450 x 100 mm - 100 x 100 mm

CR 9010 600 0450 2 CR 9010 600 0450 3 CR 9010 600 0450 4 600 x 100 mm - 450 x 100 mm

CR 9010 600 0300 2 CR 9010 600 0300 3 CR 9010 600 0300 4 600 x 100 mm - 300 x 100 mm

CR 9010 600 0200 2 CR 9010 600 0200 3 CR 9010 600 0200 4 600 x 100 mm - 200 x 100 mm

CR 9010 600 0100 2 CR 9010 600 0100 3 CR 9010 600 0100 4 600 x 100 mm - 100 x 100 mm


H H

W W

H H

W W

41

Bellmouth TripleBLMT 9916

Bellmouth DoubleBLMD 9916

Bellmouth SingleBLMS 9916



BLM 9916 050 0050 2 BLM 9916 050 0050 3 BLM 9916 050 0050 4 50 x 50 mm (2”x2”)

BLM 9916 075 0050 2 BLM 9916 075 0050 3 BLM 9916 075 0050 4 75 x 50 mm (3”x2”)

BLM 9916 075 0075 2 BLM 9916 075 0075 3 BLM 9916 075 0075 4 75 x 75 mm (3”x3”)

BLM 9916 100 0050 2 BLM 9916 100 0050 3 BLM 9916 100 0050 4 100 x 50 mm (4”x2”)

BLM 9916 100 0075 2 BLM 9916 100 0075 3 BLM 9916 100 0075 4 100 x 75 mm (4”x3”)

BLM 9916 100 0100 2 BLM 9916 100 0100 3 BLM 9916 100 0100 4 100 x 100 mm (4”x4”)

BLM 9916 150 0050 2 BLM 9916 150 0050 3 BLM 9916 150 0050 4 150 x 50 mm (6”x2”)

BLM 9916 150 0075 2 BLM 9916 150 0075 3 BLM 9916 150 0075 4 150 x 75 mm (6”x3”)

BLM 9916 150 0100 2 BLM 9916 150 0100 3 BLM 9916 150 0100 4 150 x 100 mm (6”x4”)

BLM 9916 150 0150 2 BLM 9916 150 0150 3 BLM 9916 150 0150 4 150 x 150 mm (6”x6”)

BLM 9916 200 0100 2 BLM 9916 200 0100 3 BLM 9916 200 0100 4 200 x 100 mm (8”x4”)

BLM 9916 300 0100 2 BLM 9916 300 0100 3 BLM 9916 300 0100 4 300 x 100 mm (12”x4”)

BLM 9916 450 0100 2 BLM 9916 450 0100 3 BLM 9916 450 0100 4 450 x 100 mm (18”x4”)

BLM 9916 600 0100 2 BLM 9916 600 0100 3 BLM 9916 600 0100 4 600 x 100 mm (24”x4”)

www.sfsp-ikk.com

TRUNKINGACCESSORIES

43

L: 70mm/90mm

H

With brass & steel lock nuts

90

20

H-12

TW T

TH-

12

90W T

TH-

12

90

- 50 x 50 mm- 75 x 75 mm

H

L

FeaturesLenght 55 mm

Width 10 mm

Two Slots 13 mm x 6 mm

Thickness 0.5 mm

Density 0.0024 KG

Material Copper Coated with Electro-Nickle

Continuity by joining two trunkingsManufactured with improved features and equivalent to international standards BS-7630

Application: To earth any size or any make of trunkings

U CONNECTOR / STOP END

SUSPENSION BRACKET

EARTH LINKS

FLANGED CONNECTOR

STRAIGHT CONNECTOR

ASC 9020

ASB 9035

AFC 9025

ACR 9040

www.sfsp-ikk.com

44

Cable mm2

Stud Hole

Dimensions (mm)

A C D G H B L1.5 6.5 1.8 3 10 4 6 6 18

2.5 6.58.4

2.42.4

44.2

1012

56

69

88

2126

4 6.58.4

3.13.1

4.85.0

1012

56

69

88

2126

6 6.58.4

3.83.8

4.85.0

1012

56

69

1010

2428

10 6.58.4

4.54.5

4.85.0

1112

66

79

100

2628

16 6.58.4

5.45.4

4.85.0

1212

77

77

1212

3030

20 8.4 6 7.7 12 7 7 12 32

25 6.58.4

6.86.8

8.88.8

1313

77

77

1212

3030

Size mm2

Dimensions (mm) Current Rating AMPJ E1 E2

4

50100150200

6666

6666

50505050

10

50100150200

6666

6666

90909090

16

100150200250300

8.58.58.58.58.5

8.58.58.58.58.5

125125125125125

25

100150200250300

1010101010

1010101010

160160160160160

G

ED C

H B

B

T

45°

W+(10)

(50)

A

H+(4

0)

40

48

40

w

w (mm) : 50, 100, 150, 200

B

T

45°

W+(10)

(50)

A

H+(4

0)

- CRIMPING TYPE COPPER TUBULAR CABLE TERMINAL ENDS - 1200

CLAMP FOR VERTICAL ASSEMBLY

BONDING JUMPER / 1300

STIRRUP HANGER

ACV 9028

ASH 9030


1.5 mm 2.0 mm mm

ASH 9030 4 AR 9030 020 0020 5 2 x 2

ASH 9030 4 AR 9030 030 0020 5 3 x 2

ASH 9030 4 AR 9030 030 0020 5 3 x 3

ASH 9030 4 AR 9030 040 0020 5 4 x 2

ASH 9030 4 AR 9030 040 0020 5 4 x 3

ASH 9030 4 AR 9030 040 0020 5 4 x 4


www.sfsp-ikk.com

C-CHANNELS LOADS & SUPPORTS

46

ChannelSFSP’s metal framing channel is cold formed on modern rolling machines from low carbon steel manufactured according to BS 6946:1988. A continuous slot provides the ability to make attachments at any point.

LengthsStandard length: 3000mm with ± 3.2mm length tolerance.Custom lengths vv available upon request.

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

Documents

INDEX - About SFSPunitech-ikk.com/.../steel-construction-products/... · SFSP has manufacturing facilities in KSA, UAE, Egypt, and Lebanon. SFSP adapts quickly and easily to market