Embed Size (px)
Citation preview
EC 160 CO2 INCUBATOR• Chamber Volume : 160 liters• Temperature range: Ambient Temperature: + 7°C to 50°C• Temperature variation / fluctuation: ± 0,3°C at 37°C / ± 0,1°C• Programmable temperature alarm range: ± 0,5°C to 5°C• Air jacketed heating system• RaPIDcell™ fast temperature recovery without overshoot• CO2 Range: 0 to 20 % CO2
• CO2 Variation / Fluctuation: ± 0.3 % / ± 0.1%
• Programmable CO2 alarm range: ± 0.5 % to 5.0%
• Infra-Red CO2 level control permitting frequent access
• LifeCell™ control software to optimize parameters• Large, bright LCD display with text messages and help • Simultaneous display of set and actual values• Seamless stainless steel chamber with rounded corners • Clean chamber without any sensor inside • NüveDis™ 90°C wet disinfection system
• NüveTrack™ monitoring and recall of last 72 hr. parameter values and alarms • Auto Zero for permanent accurate control• 0.22 μm sterile filtration of CO2, sampled gases and Auto-Zero reference air
• Typical 95 % RH to protect cultures against dehydration • Audible and visual (text) alarms, remote alarm relay • Remote alarm outlet• Built-in 2nd stage gas regulator • Three shelves • Humidity tray
EC
1
60
• DF 490: -86°C FR 490 : -41°C• DirectFREEZE™ : Faster and homogenous freezing through the
coils located inside the shelves.• Four independent compartments with insulated doors for
decreasing air entry• Minimized air exchange on opening reduces ice build-up and
protects samples• Compartment dimensions match commonly used cryoboxes • Washable air filter for simple maintenance and top performance• Perfect airtightness with soft gasket • Heated contact surface of gasket to virtually eliminate icing-up• Chamber made of stainless steel for long life and shelves
made of aluminum for faster heat transfer• Epoxy-polyester powder coated stainless steel outer body• Foamed-in-place high density polyurethane insulation • Easy to use and safe operation using a microprocessor control system
• Highly visible, large LED display • Temperature, data tracking and storage on PC via optional
RS 232 port and NüveFREEZE™ software• Password protected control system• Door handle with key lock• Key operated mains power switch to protect your samples • Audible and visual alarm system • Alarm system is fed by a permanently recharged battery• Display of actual temperature even at power failure• Standard remote and central alarm ports• Optional battery-operated 7- day chart recorder• Optional AlerText™ SMS alarm system for ultimate security
• Optional NüveWarn™ remote alarm system• Optional CO2 back-up system extends protection in case of failure (DF only)
• Up to 32,000 tubes storage capacity with 455 liters chamber volume
DF
/F
RS
ER
IE
SDF 490 ULTRALOW TEMPERATURE & FR 490 LOW TEMPERATURE DEEP FREEZERS
1984
EN
SE
RI
ES
EN
S
er
ie
sE
SS
ER
IE
S
EN 025/055/120 INCUBATORS• Three different sizes: 25, 55 and 120 liters.• Temperature range: Ambient Temperature +5°C / 80°C.• Excellent incubation conditions for the applications in biology and
microbiology laboratories such as medical and veterinary fields; research and quality control examinations in pharmaceutical, food and cosmetics industries and biotechnology.
• Programmable PID microprocessor control system.• User friendly control panel located on the door,
including digital displays for temperature and time.• Stainless steel interior for easy cleaning and decontamination. • Air jacketed heating system and triple insulation for highly precise and
constant temperatures.• Very homogeneous temperature distribution by natural air convection:
Minimum turbulance and no cross contamination.• Frameless inner glass door for the observation
of samples without any temperature drop.• Safety thermostat as standard.• Optional NüveTherm™ data control software and RS 232 kit.
EN 300/400/500 INCUBATORS• Three different sizes: 22, 44 and 120 liters.• Temperature range: Ambient Temperature +5°C / 80°C.• Excellent incubation conditions for the applications in all
biology and microbiology laboratories such as medical and veterinary fields; research and quality control examinations in pharmaceutical, food and cosmetics industries and in biotechnology.
• Programmable PID microprocessor control system.• User friendly control panel including digital displays
for temperature and time.• Delayed start timer. • Anodic-oxidated aluminum chamber for
standard models; stainless steel chamber for "P" models.• Very homogeneous temperature distribution obtained by natural air
convection for standard models and by forced air ventilation for "P" models.• Frameless inner glass door for the observation
of samples without any temperature drop.• Safety thermostat as standard.
ES 120/252 COOLED INCUBATORS• Two different sizes: 120 and 252 liters.• Temperature range: -10°C / 60°C.• Ideal design for freezing, incubation, drying, different types of
tests and long storage in the fields of biology, zoology, botany and the quality control and R&D laboratories in industry such as pharmaceutical, food and cosmetic.
• Programmable microprocessor control system.• Nine program memories with nine steps.• Easy to use control panel including digital displays for
temperature, time, program no and step no.• Stainless steel chamber.• High density injected polyurethane insulation.• Powerful air circulation system for excellent temperature
uniformity and stability even at low temperatures.• Automatic defrost system.• Large window on the door consisting of triple glass
for perfect insulation.• Interior lighting with on/off control.• Optional NüveTherm™ data control software and RS 232 kit.
KD
SE
RI
ES
FN
SE
RI
ES
EV
0
18
FN 032/055/120DRY HEAT STERILIZERS / OVENS
Three different sizes: 32, 55 and 120 liters. •Temperature range: Ambient Temperature +5°C / 250°C. •Designed for sterilization, drying and heating purposes. •
Programmable PID microprocessor control system. •User friendly control panel including digital displays for temperature and time. •
Delayed start timer. •Stainless steel interior for easy cleaning and high resistance to most of the chemicals. •
Excellent uniformity and stability of temperature by triple • insulation and air jacketed heating system.
Natural air convection for homogeneous temperature distribution. •Very low temperature loss by means of the door pressing firmly •
and tightly on the chamber gasket. Outlet port for vapour exhaustion. •
Safety thermostat as standard. •
FN 300/400/500DRY HEAT STERILIZERS / OVENS
Three different sizes: 22, 44 and 120 liters. •Temperature range: Ambient Temperature +5°C / 250°C. •Designed for sterilization, drying and heating purposes. •
Programmable PID microprocessor control system. •Easy to use control panel including digital displays for temperature and time. •
Delayed start timer. •Excellent uniformity and stability of temperature by high grade of insulation and •
microprocessor control system.Anodic-oxidated aluminum chamber for standard models; stainless steel chamber for "P" models. •
Very homogeneous temperature distribution obtained by natural air convection • for standard models and by forced air ventilation for "P" models.
Low temperature loss by means of the door pressing firmly and tightly against the chamber gasket. •Outlet port for vapour exhaustion. •
Safety thermostat as standard. •
KD 200/400/700 OVENS• Three different sizes: 193, 373 and 757 liters.• Temperature range: 70°C / 250°C.• High volume for drying and heating purposes.• Programmable PID microprocessor control system.• Easy to use control panel including digital display for temperature and time.• Delayed start timer. • Excellent uniformity and stability of temperature by high grade of insulation and
microprocessor control system.• Stainless steel chamber.• Very homogeneous temperature distribution obtained by forced air ventilation.• Extraction fan.• Low temperature loss by means of the door pressing firmly and tightly against the chamber gasket.• Outlet port for vapour exhaustion.• Safety thermostat as standard.
EV 018 VACUUM OVENUseful volume: 15 liters. •
Temperature range: 70°C / 200°C. •Ideal design for gentle drying of heat labile samples and experiments under inert gasses. •
Programmable PID microprocessor control system. •Easy to use control panel including digital displays for temperature and time. •
Stainless steel chamber with high resistance to corrosion, most of the chemical vapours and contamination. •One piece gasket made of silicon, simply fitted directly on the oven body. •
Vacuum gauge on the control panel. •Two spherical valves for vacuum connection and adding dry air or inert gasses. •
Heat-treated glass window on the door. •Safety thermostat as standard. •
Optional NüveTherm™ data control software and RS 232 kit •
1984
1984
NF
SE
RI
ES
NF
SE
RI
ES
NF 1200 – NF 1200R MULTI PURPOSE BENCH TOP CENTRIFUGES
NF 800 – NF 800R MULTI PURPOSEBENCH TOP CENTRIFUGES
Swing-out Rotors Angle RotorsMaximum Capacity: 4x200 ml 2x3M.Plate 6x50 ml 30x15 ml 24x1.5/2 ml Maximum Speed : 4.100 rpm 4.100 rpm 9.000 rpm 4.100 rpm 14.000 rpmMaximum RCF: 3.045xg 2.349xg 9.418xg 3.007xg 18.407xg
Swing-out Rotors Angle RotorsMaximum Capacity: 4x280 ml 2x3M.Plate 6x100 ml 10x10 ml 24x2 ml 30x1.5/2 mlMaximum Speed : 4.100 rpm 4.100 rpm 9.000 rpm 12.000 rpm 14.000 rpm 13.500 rpmMaximum RCF: 3.082xg 2.349xg 8.965xg 14.167xg 18.407xg 20.170xg
Angle Rotor Haematocrit Rotor• Maximum Capacity : 24x1.5/2 ml 24xcapillary tubes• Maximum Speed : 14,000 rpm 12,000 rpm• Maximum RCF : 18,188xg 14,811xg• Programmable microprocessor control system. • Digital displays for time and speed / RCF (xg).• 1 - 99 minutes timer with hold position.• Epoxy-polyester powder coated steel chamber.• Pulse key.• Quiet, direct drive, brushless induction motor.• Motor over heating protection.• Ventilation system for minimum temperature increase in the chamber. • Lid lock.• Choice of 24x1.5/2 ml Angle Rotor and 24x capillarytube Haematocrit Rotor.• Adaptors for 500/800 μl, 200 μl PCR, 250/400/700 μl.
NF 200 BENCH TOP CENTRIFUGE• Maximum Capacity : 12x15 ml• Maximum Speed : 5.000 rpm• Maximum RCF : 2.822xg• Programmable microprocessor control system.• Digital displays for time and speed / RCF (xg).• 1 - 99 minutes timer with hold position.• Epoxy-polyester powder coated steel chamber.• Pulse key.• Quiet, direct drive, brushless induction motor.• Motor over heating protection.• Ventilation system for minimum temperature increase in the chamber. • Lid lock.• Delivered with 12x15 ml Angle rotor made of polypropylene.• Adaptors for 1,5/2 ml, 5 ml and 7 ml tubes.
NF 400-NF 400R MEDIUM CAPACITY BENCH TOP CENTRIFUGES
Angle Rotor Swing-out Rotors• Maximum Capacity : 16x15ml 4x100ml 2xM.Plate• Maximum Speed : 4,100 rpm 4,100 rpm 4.100 rpm• Maximum RCF : 2.142xg 2.819xg 2.011xg• Programmable microprocessor control system.• Digital display for time and speed / RCF (xg).• Digital display for temperature for NF 400R.• Programmable relative centrifugal force (RCF).• Electronic imbalance detection system.• Stainless steel chamber.• 1 - 99 minutes timer with hold position.• 5 acceleration / 5 braking rates.• Lid lock.• Powerful, quiet, and maintenance - free induction motor.• Minimum temperature increase in the chamber by means of ventilation system for NF 400.• Temperature control between -9°C / +40°C for NF 400R.• Motor over heating protection.• Wide range of accessories to accommodate most manufacturers’ tubes and microtitre plate.• Totally CFC free refrigerant fluid and insulation material for NF 400R.
• Programmable microprocessor control system.• Programmable parameters:
Program no., speed / RCF, time, acceleration and breaking rates and temperature for NF 800R and NF 1200R.
• Four digital displays for programmable parameters.• 1-99 minutes with hold position.• Ten program memories.• 10 acceleration / 10 braking rates• Stainless steel chamber.• Wide range of accessories to accommodate most
manufacturers’ tubes and microtitre plate.• Powerful, quite, maintenance-free induction motor.• Minimum temperature increase in the chamber by means
of ventilation system for NF 800 and NF 1200.• Temperature control between -9°C / +40°C for
NF 800R and NF 1200R.• Totally CFC free refrigerant fluid and insulation
material for NF 800R and NF 1200R.
NF 048 MICROLITRE AND HAEMATOCRIT CENTRIFUGE
ST
4
02
BM
SE
RI
ES
NB
S
ER
IE
SNB 5/9/20 UNSTIRRED WATERBATHS
Three different useful volumes : 4, 7 and 15 liters. •Temperature range: Ambient temperature + 5°C / 99.9°C •
Designed for many general and special applications in microbiology, •research and industrial laboratories.
Excellent temperature control of liquid by programmable •PID microprocessor control system.
Highly visible dual display for temperature and time. •Delayed start timer. •
Seamless stainless steel tank for easy cleaning. •Excellent temperature uniformity and stability by triple insulation. •Footprint almost equal to the working area to save bench space. •
ST 30 SHAKING WATERBATHTank volume: 30 liters •
Temperature range: Ambient temperature +5°C / 99.9°C • Shaking speed between 20 - 250 rpm •
Programmable microprocessor control system for shaking speed, temperature and temperature •LED display for shaking speed, temperature and time •
Excellent temperature control of liquid for uniform and stable temperatures •Seamless and stainless steel tank •
Heater replaced outside of the tank •Triple insulation for homogeneous and stable temperature •
User friendly control panel • Possibility to use different type of tubes, flaks or erlenmeyers with the wide range of accessories •
Excellent temperature control of liquid for uniform and stable temperatures. •Seamless stainless steel tank. •
Powerful internal circulation pump for homogeneous temperatures. •Programmable microprocessor control system. •
Easy to use control panel including digital displays for temperature and time. •Optional external circulation system for BM and BS series. •
Various type of tube racks and shelves for flasks. •Optional NüveTherm™ data control software and RS 232 kit •
BM/BS SERIES WATERBATHS• Different tank volumes and temperature ranges:BM 302 : 14 liters, Ambient Temperature +5°C / 80°CBM 402 : 30 liters, Ambient Temperature +5°C / 80°CBS 302 : 14 liters, 0°C / 80°C BS 402 : 30 liters, 0°C / 80°C
ND
SE
RI
ES
NS
10
3P
S
54
ND 4 / 8 / 12WATER DISTILLERS• Capacity:
ND 4: 4 lt/hr, ND 8: 8 lt/hr, ND 12: 12 lt/hr • Distilled water storage tank capacity:
ND 4: 8 liters, ND 8: 16 liters, ND 12: 24 liters • New design with distilled water storage tank • Fully automatic system with microprocessor control system• Stainless steel boiler and condenser • Stainless steel heaters • Energy saving design by the distillation of heated cooling water• Protected heaters against running dry• Warning leds for: High water level, insufficient water, heater
failure, half full storage tank, full storage tank • Siliphos cartridge filter to decrease calcification on the heaters • Suitable for bench and wall mounting
NS 103 ECONOMICAL WATER DISTILLER• Distilled water capacity: 3.5 lt / hr.• Stainless steel heater.• All surfaces in contact with water and steam made of stainless material.• Manometer for inlet water pressure.• Protection against empty boiling tank and water interruption.• High efficiency even at low inlet water pressure.• Wall mounted type, saving space in the laboratories.• Easy and simple operation.
PS 54PLATELET AGITATOR
Capacity: 54 pcs platelet bags • Number of shelves: 9 pcs. •
Shaking speed: 60 stroke/min • Specially designed for platelet bags •
Low noise operation •Body and shelves made of stainless steel •
Maximum homogeneity with mesh type shelves for air circulation •Easy access to platelet bags on pull-out shelves •
Ergonomic shelf design •Information shown on the label holder for each shelf •
Audible alarm if motion is not detected •
KN
SE
RI
ES
PN
S
ER
IE
S
KN SERIES BLOOD BANK REFRIGERATORS
Advanced technology to store blood and blood components. •Stainless steel chamber. •
High density injected polyurethane insulation. •Door window with triple glass for perfect insulation. •
Magnetic gasket on four sides of the door and door key lock. •Chamber illumination with on/off switch control. •
Easily drawn stainless steel drawers with plexiglass cover on the front. •Separators inside the drawers to hold the blood bags in an angled position for easy label reading. •
Powerful air circulation system to maintain temperature •uniformity and stability and for quick recovery time.
Fully automatic defrost system to maintain cooling coil efficiency. •Mains power witch key with lock. •
Microprocessor control system to simplify the operation and • guarantee the safety of the stored component.
Temperature range: 0°C / +10°C. •Large digital display with a resolution of 0.1°C. •
Alarm system for high and low temperature, power failure, temperature sensor failure, and open door. •Re-chargable battery to feed alarm system. •
Remote and central alarm outlets as standard. •Optional NüveBank™ temperature data tracking and storage software and RS 232 port. •
Temperature measurement from a liquid which has similar thermal specifications with blood. •Battery operated 7-day chart recorder with high resolution. •
Optional AlerText™ SMS alarm system for ultimate security •
Optional NüveWarn™ remote alarm system •
Capacity: •KN 72 : 202 liters, 72 blood bags,KN 120 : 320 liters, 120 blood bags,KN 294 : 630 liters, 294 blood bags,KN 504 : 1090 liters, 504 blood bags.
PN 150/300 PLATELET INCUBATORS
PN 150 : Chamber Volume : 187 liters Includes 1 pc PS 54 Platelet Agitator • PN 300 : Chamber Volume : 340 liters Includes 2 pc PS 54 Platelet Agitator
Temperature range: 20°C to 35°C • Interior chamber: Stainless steel •
Convenient observation of platelet bags with interior illumination and large window •High density injecte polyurethane insulation •
Perfectly insulated triple glass window and stainless steel frame • Antifogging inner glass for avoiding condensation and outer glass blocking UV light •
Prevention of air leakage from the chamber and ambient ingress with magnetic gasket •Protection against inadvertent and unauthorized access by using a key lock •
Excellent temperature uniformity and stability with powerful air circulation system • Platelet protection because of quick recovery time after door openings •
Simple and safe operation using a microprocessor control system • Highly visible, large LED display with 0.1°C resolution •
Optional NüveBank™ temperature data tracking and storage software and RS 232 port • Power switch with key lock to prevent the platelet incubators from unauthorized use •
Audible and visual alarm system • Alarm system is fed by automatically recharged battery •
Display of actual temperature even at power failure • Battery operated 7-day chart recorder •
Standard remote and central alarm ports •Optional AlerText™ SMS alarm system for ultimate security •
Optional NüveWarn™ remote alarm system •
1984
1984
EN
SE
R‹
S‹
MN
SE
RI
ES
LN
SE
RI
ES
MN SERIES CLASS II MICROBIOLOGICAL SAFETY CABINETS• Two models with different working table width:
MN 090: 89 cm / MN 120: 119 cm.• First class protection for operator, environment and product.• Microprocessor control system with digital
display for air flow speed.• Two HEPA filters with 99.999 % efficiency for particles ≥ 0.3 μm.• Automatic speed compensation system against clogged filter.• Mains power switch with key lock.• Alarms for: Power failure, control system failure, open window,
low and high air flow speed, clogged filters.• Perfect air tightness of window seal by means of
gas spring assisted window.• Comfort of usage with very quiet blower and
high light intensity.• Smooth chamber walls and rounded corners without
soldering for easy cleaning and decontamination.• Stainless steel and removable 3 pcs. work table.• DOP test inlet, elapsed time counter and 2 pc.
power socket as standard.• EN 12469 Certificate for MN 120.
LN SERIESLAMINAR FLOW CABINETS• Two models with different working table width:
LN 090: 89 cm. LN 120: 119 cm.• Designed for the applications with non-hazardous materials in
particle free environment for complete product protection.• Single piece working table made of stainless steel for easy
cleaning and decontamination.• Pre-filter with 85 % efficiency for particles ≥ 0.5 μm ;
HEPA filter with 99.999 % efficiency for particles ≥ 0.3 μm.• Microprocessor control system with digital
display for air flow speed.• Automatic speed compensation system against clogged filter.• Audible and visible alarm for lower or higher airflow speed.• Recirculated HEPA filtered air to prolong the lifetime of
pre and HEPA filters.• High light intensity and low noise level.• Elapsed time counter and 2 pcs. power socket as standard. • DOP test inlet.
ST
EA
MA
RT
SE
RI
ES
OT
0
12
OT 012 BENCH TOP STEAM STERILIZER• Chamber volume: 12 liters.• Temperature range: 110°C / 140°C.• Used for the sterilization of unwrapped medical
or dental instruments. • Programmable microprocessor control system.• Easy to use control panel, including digital
displays for temperature and time.• Proportional heating system.• Manometer for chamber pressure.• Safety valve against over-pressure.• Very simple operation without any water
or drain connection.
B & S CLASS BENCH TOP STEAM STERILIZERSOT 18B/23B OT 23S OT 23VS/32VS• Conforms to the requirements of EN 13060 standard.• Chamber Capacity: OT 18B : 18 liters
OT 23B, OT 23S, OT 23VS : 23 litersOT 32VS : 32 liters
• Type of Sterilization Loads: B Models: All wrapped, un-wrapped, solid, hollow load productsType A* and porous products.VS models: Non-wrapped solid products, porous products, small porous items, hollow load products Type B*, single wrapped products, multiple-layer wrapped products.S model: Non-wrapped solid products, single wrapped products.
• Programs: B & S models: Universal, Quick, Gentle, PrionVS models: Universal, Wrapped Materials, Gentle, Quick, Prion
• Test Programs:B models: Bowie & Dick / Helix Test and Vacuum TestVS models: Bowie & Dick and Vacuum Test
• Seamless chamber for 18 and 23 liters models.• Fractionated pre-vacuum system for B and VS models.• Fractionated gravity system for OT 23S• Advanced microprocessor control system with 128x64 pixels LCD display.• Process evaluation system.• Comprehensive self-diagnostic system.• Memory for last 52 cycles.• Reminder for cleaning and maintenance.• RS 232 port for printer, NüveStore™ SD card writer or NüveSteamArt™
softwere for traceability.
* As defined in EN 13060 Standard
1984
1984
1984
OT
10
0V
OT
4
0L
/9
0L
OT 100V VERTICAL STEAM STERILIZER• Chamber volume : 100 liters • Advanced technology for the sterilization of textile; wrapped or packed
materials; glass and liquid • Fully automatic system leaves user free for other important work• Integrated steam generator for fast production of steam• Maintenance-free diaphragm type powerful vacuum pump • Fractionated pre-vacuum to eliminate all air bubbles and achieve
100% steam penetration• Fractionated post-vacuum for efficient drying of the samples• Sterilization quality matching the needs of EN 285 European Standard
for Large Steam Sterilizers• Pre-heated chamber to eliminate condensation on the chamber walls
and speed up the heating of the samples• Easy to use microprocessor control system with 128x64 pixels LC display• 5 preset programs : Universal, Solid, Prion, Quick, Gentle• 6 special programs including liquid sterilization at 121°C• Test programs for Bowie & Dick / Helix and vacuum leakage• Memories for the last 25 cycles • Cycle counter records the number of the operated cycles in the memory• RS 232 port for printer NüveStore™ SD card writer or NüveSteamArt™
software for traceability • Password protected Service menu• Process evaluation system• Comprehensive self diagnostic system for possible failures • Ergonomic and user friendly design conforming to 93/42/EEC
MDD Medical Device Directive, EN 285 European Standard for Large Steam Sterilizers and 97/23/EEC PED Pressure Equipment Directive
OT 40L / 90L LABORATORY STEAM STERILIZER• Chamber volume:
OT 40L: 40 liters, OT 90L: 90 liters• Maximum capacity :
OT 40L: 2x5 liters, OT 90L: 3x8 liters• Sterilization temperature range : 105°C - 135°C • Especially developed for the steam sterilization of liquid and culture media • Advanced microprocessor control system with 128x68 pixels LC display • 5 preset programs : 2 for liquid and 3 for solid• 2 custom made programs for liquid and solid • Programmable melting program : 60°C - 100°C • Programmable pre-heating : 40°C - 60°C • Memory for last 25 cycles • Programmable delayed start function • Flexible temperature sensor to measure the exact liquid temperature • Cooling by forced air ventilation over chamber • Fractionated exhaust system for sensitive materials such as glass • Comprehensive self-diagnostic system • Chamber made of 316L stainless steel • Manometer for chamber pressure • Validation port • RS 232 port for printer NüveStore™ SD card writer or NüveSteamArt™
software for traceability • Safety precautions for lid opening depending on the
type of the sterilized material
1984
1984
ST
EA
MA
RT
SE
RI
ES
Conforms to the requirement of EN 285 European Standard for Large Steam Sterilizers. •Chamber and STU capacity : OT 300: 300 liters, 4 pcs. STU •
OT 430: 430 liters, 6 pcs. STUOT 570: 570 liters, 8 pcs. STU
Ideal design for the steam sterilization of packed or unpacked surgical •and dental instruments, operation linen, glass, plastic, rubber and silicon
materials, infusion liquids, microbiological cultures and medical waste.Chamber, steam jacket, door and steam generator made of 316L stainless •
steel and conform to PED 97/23/EC Pressure Equipment Directive.Pneumatically controlled door opening with safety system. •
Steam driven one piece chamber gasket made of silicon. •High capacity, low noise water ring vacuum pump for vacuum function. •
High quality valves, sensors and transmitters for a problem free and safe operation. •Pneumatic valves in the steam lines. •
Innovative AIR – COOLING system for low water and energy consumption. •PLC control system with 7” colorful touch screen •
Wide screen allows monitoring all related information regarding sterilization cycle. •6 preset programs, 50 custom made programs. •
Two test programs: Bowie&Dick and vacuum leakage. •Memory for last 28 cycles. •
Independent control system besides the main control •system to record the data related to every cycle.
Comprehensive self–diagnostic system for possible system malfunctions. •Service menu to detect the problem in case of a failure. •
Thermal printer offered as standard. •Optional RS 232 port and software. •
Double door versions with 3.3” touch screen on the clean side: OT 430D and OT 570D. •
OT 300 / 430 / 570STEAM STERILIZERS
1984
TK
SE
RI
ES
GC
40
0
TK 120/252/600 TEST CABINETS• Three different sizes: 120, 252, 632 liters• Economical solution to simulate real environmental conditions
by controlling temperature, humidity and day & night cycles.• Excellent design for different purposes in different sectors such as:
Electric and electronic industry, automobile industry, automobile supply industry, chemical industry, plastic industry, textile industry, pharmaceutical industry, food industry, packaging industry, plant growth, seed germination, incubation and rearing of insects.
• Wide range of temperature control: -10°C/ +60°C (lights off), 0°C/ +60°C (lights on).
• Programmable humidity range: 20 % - 95 % Rh. (between +10°C / +60°C).• Programmable alarm range: 2 - 10°C, 5 - 20 % Rh.• Powerful illumination by means of the lights located inside the door
Max. lighting level: TK 120: 6.000 lux, TK 252 / 600: 12.000 lux.• Programmable lighting timer: 0 - 24 hours.• Easy to use programmable microprocessor control system.• 10 program memories.• 9 program steps for temperature and humidity.• User friendly control panel with 128 x 64 pixel LC display.• 32 Kb standard, 256 Kb optional memory.• Chamber made of stainless steel. • Ø 25 mm. access port.• Internal glass door.• Humidity produced by the humidity generator.• Self-diagnostic system for possible failures.• Adjustable safety thermostat for heating.• Outlet for printer connection for printing current or stored programs.• Optional NüveGrowth™ software for programming and controlling via PC.• CFC-free refrigerant and insulation.
GC 400 GROWTH CHAMBER• Advanced technology for tests at different climatic and lighting conditions
such as plant growth, seed germination, acclimation of plants, culture of plant cells and tissues, genetic manipulations of plants, cultivation of protoplasm and cells, incubation and rearing of insects.
• Chamber volume: 400 liters. • Wide range of temperature control : -20°C / +60°C (lights off),
0°C/+60°C (lights on)• Programmable humidity range: 20 % / 95 % Rh (between +10°C and +60°C).• Programmable alarm range: 2 - 10°C, 5 - 20 % Rh.• Lighting from three sides: Left, right and up. • Max. lighting level: 20.000 lux. • Programmable lighting function: 0 - 24 hour timer for each side.• Door mounted, state-of-art programmable microprocessor control system. • 10 program memories.• 9 program steps for temperature and humidity. • Programmable altitude for calculating right humidity value
according to psychrometric formula.• User friendly control panel including 128 x 64 pixel LC display. • Chamber made of stainless steel and glass windows. • Humidity produced by a humidity generator. • Humidity measurement according to pyschrometric diagram. • Self-diagnostic system for possible failures.• 32 Kb standard, 256 Kb optional memory.• Adjustable electronic safety thermostat. • Outlet for printer connection for printing current or stored programs.• Optional NüveGrowth™ software for programming and control via PC.• CFC-free refrigerant and insulation.
ID
3
00
ID 300CLIMATICTESTCABINET
• Ideal design for the tests at different climatic conditions and stability,artificial aging and storage tests in industries such as electronic,
automobile, automobile supply industry, aircraft and aviation, chemical, plastic, textile,
pharmaceutical, construction material, food, packaging and military equipment.
• Chamber volume: 290 liters.• Wide range of temperature control: - 40°C / +150°C.
• Programmable humidity range:15 % - 98 % Rh (Between 10°C / 90°C).
• Door mounted state-of-art programmable microprocessor control system.
• Ten program memories.• Programmable 9 step for temperature and humidity.
• Programmable altitude to calculate the right humidity value according to
psychrometric formula.• User friendly control panel including
128 x 64 pixel LC display.• Stainless steel chamber.
• Ø80 mm access port on the right side.• Triple insulation consisting of high density
injected polyurethane, glass wool and aluminum layer.
• Heated door window with quintuble glass for perfect insulation.
• Interior lighting.• Producing humidity by dew-point bath.
• Humidity measurement according to psychrometric diagram by means
of the dry and wet bulb temperature.• Self-diagnostic system for possible failures.
• Adjustable electronic safety thermostat.• Possibility of connecting four pieces
of PT 100 temperature sensor measure any four points in the chamber.
• 32 Kb standard, 256 Kb optional memory.• Outlet for printer connection to print
current or stored programs.• Optional NüveClimate™ software
program for control via computer.• CFC-free refrigerant and insulation.
ID 300 CLIMATIC TEST CABINET
A Strong FoundationEstablished over 40 years ago in 1968, NÜVE is one of the fastest expanding manufacturers of laboratory and sterilization
instrumentation in the world today.
Quickly becoming market leader in our home country, the major proportion of our production is today exported to over 90
countries worldwide and the brand is established as a driving force in the development of new products.
Quality & ReliabilityQuality is a keyword for NÜVE. This is proven by its certification to ISO 9001:2008 and ISO 13485:2003. Combining this
with a strong ethic of providing outstanding value, NÜVE incessantly strives to increase efficiency through evolution of its
working practices and investment in the latest machine tools. Top class components and high grade raw materials ensure
that the final product is something that the user can be proud of. An important factor in the high level of reliability is the
commitment of the production team, half of which has been with the company for over 20 years.
Investment & ExpansionSubstantial investment in R&D enables NÜVE to offer an ever-widening range of quality products. A team of highly qualified
and experienced engineers has been producing instruments with unique characteristics bringing additional benefits to our
customers. The offer in the field of biology in particular has significantly expanded and the level of technological innovation
is proven by the large number of trade-marked features recently introduced in the range.
NÜVE has been growing continuously and strongly, even during the recent worldwide economic crisis. With its dedication
to customer service, NÜVE is committed to ensuring the supply to its customers on time. During the last seven years, the
size of the production plant was doubled as were the number of machine tools for production.
Wide Ranging MarketsNÜVE products are designed and developed for a broad spectrum of markets including clinical laboratories, medical
research, biotechnology, agriculture, veterinary labs, food, beverage and dairy, chemicals, automotive, aerospace,
ceramics, water and pharmaceutical industries.
Professional SupportAs we innovate, we educate. Recognizing that education is key onto the continuous growth of the company and its products,
NÜVE is committed to providing relevant, leading-edge educational opportunities throughout the year for its distributors.
Comprehensive distributor training in products and after-sales servicing by NÜVE experts ensures professional local
support for customers and an excellent return on the investment in this innovative brand. Some recent instruments include
the facility enabling NÜVE engineers to carry out analysis and even updates remotely from the NÜVE headquarters, keeping
customer products on top performance.w
ww
.rek
may
.com
.trW
e re
serv
e th
e rig
ht t
o m
odify
the
des
ign
and
desc
riptio
n.10
.12/
Z15.
K 34
001
NÜVE SANAYİ MALZEMELERİ
İMALAT VE TİCARET A.Ş.
ISO 9001: 2008ISO 13485: 2003
Esenbo¤a Yolu, 22 km. Akyurt 06750 ANKARA TURKEYTel : (+90.312) 399 28 30 (pbx)Fax : (+90.312) 399 21 [email protected]
The Right Choice for the Right Results
