increase productivity Reduce scrap SUPERIOR VALUE …increase productivity ... Standard ports are located in position 5 in the cap. Valves must be customer supplied. See chart at left

www.phdinc.com1-800-624-8511

www.phdinc.com1-800-624-8511

CLASSIC06

CLASSIC PRODUCTScatalog 2006

cylinders

rotary actuators

powered slides

grippers

accessories

increase productivity • Reduce downtime • Reduce scrap • SUPERIOR VALUE

2

www.phdinc.com/products/classic • (800) 624-8511

CLASSIC06

The products listed in this catalog are for replacement ofexisting products out in the field. For new applications, pleaserefer to the products in PHD’s main catalog.

CAT-06

When applicable, we have recommended newer productsto replace our classic products. This is an example:

© Copyright 2006, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.

CLASSIC PRODUCT & SERIES PAGE NO.

CYLINDERS

O Compact ............................................................... 5 - 9

AS, AVS, HVS Spherical Mount ............................ 10 - 13

EA, EH, EL, ES Heavy Duty ................................... 14 - 17

1-1/8, 1-3/8 NEAG, NEHG Heavy DutyNon-Rotating ........................................................ 18 - 20

ROTARY ACTUATORS0180 ..................................................................... 21 - 25

SLIDES

N .......................................................................... 27 - 29

T & TS08 .............................................................. 31 - 35

R .......................................................................... 36 - 42

C ........................................................................... 43 - 45

B ........................................................................... 47 - 51

M .......................................................................... 52 - 56

SGxM ................................................................... 57 - 60

GRIPPERS

8600 Parallel ........................................................ 62 - 64

7900 Parallel ........................................................ 65 - 67

8600 Angular ........................................................ 69 - 71

7900 Angular 2 & 3 Jaw ....................................... 73 - 77

190 Angular .......................................................... 78 - 80

ACCESSORIES

Tandem Oil ............................................................. 81-82

Air/Oil Tank Reservoir ........................................... 83- 84

INDEX

SERIES 7900 ANGULAR

For new applicationswe recommend

Series GRB & 5300 Grippers.See PHD’s main catalog.

This catalog does not include all productinformation for these products. Additionalinformation (benefits, engineering data,options, etc.) may be viewed at PHD's web site:

www.phdinc.com/products/classic

CLASSIC PRODUCTS

3


CLAS

SIC0

6

��

��

��

��

Series NSeries T &TS08

Series RSeries CSeries BSeries M

Series SGxM

Series O CompactSeries AS, AVS, HVS Spherical Mount

Series ESeries NE Heavy Duty Non-Rotating

Series 0180 Miniature

��

Series 8600 ParallelSeries 7900 ParallelSeries 8600 Angular

Series 7900 Angular 2 & 3 jawsSeries 190 Angular

�� Tandem OilAir/Oil Tank & Reservoir

4255

51255

4 5

4 5

5 10

��

��

5564644

5535355

4


CLASSIC06

BENEFITS■ The compact size of the Series CRS Cylinder makes it ideal for

applications where cylinder length is critical.

■ Series CRS Cylinders have been tested to 10 million cyclesunder normal conditions.

■ Thru and threaded holes for easy cylinder mounting.

■ Optional accessories provide additional mounting flexibility.

■ Nitrile piston and rod seals for long life and low maintenance.

■ Optional Fluoro-Elastomer seals for greater fluid compatibility.Consult PHD for high temperature use.

■ Field repairable for extended life.

■ Optional shock pads extend cylinder life and minimize pistonnoise in applications where the piston contacts the headand/or cap. The shock pad design adds no additional length tothe cylinder.

■ Available with two piston lengths. The standard piston providesthe shortest possible units. The wide piston provides additionalrod end stability and magnet capability for use with PHDMagnetoresistive and Reed Switches.

■ Switches may be mounted on three sides of the cylinder formaximum flexibility (two sides for 12 and 16 mm sizes) andprovide a signal on extension and retraction with strokes asshort as 1/4 inch [5 mm].

We recommend Series CRS Compact Cylinders.For more information, see PHD’s main catalog.

5


CLAS

SIC0

6

Series O Compact Oval Cylinders

Oval piston provides high force in a compact package.


Series CRS Cylinders.See PHD’s main catalog.

O

6


CLASSIC06

ORDERING DATA: SERIES O COMPACT OVAL CYLINDERS

A 3/4 1/2x

CYLINDERSIZE

R1-T1–

TO ORDER SPECIFY:Product, Series, Type, Design No., Mounting Style,Bore Size, Stroke, and Options.

C O 1 R

PRODUCTC - Cylinder

SERIESO - Compact Oval

EFFECTIVEAREA (in )

3/4"1"

1-1/4"

.518

.8581.281

DESIGN NO.

STANDARDSTROKE LENGTHS

1/8" to 2" in1/8" increments

2-1/4" to 4" in1/4" increments

MOUNTING STYLE

A - Thru holes with c'bore in the headC - Threaded holes in the face of the capR - Threaded holes in the face of the head

TYPEA - Thin cap, shortest possible unitB - Thin cap with wide pistonNOTE: Wide piston adds 1/2"to the overall cylinder length andis for use with magnetic option -E4

OPTIONS

Standard ports are in the cap in position 5.

2E4

F1K __

R1

T1U1

- Magnetic piston for use with PHD Miniature Hall Effect Switches (Model COB)- Extended length wrench flats.- Extra Rod Extension in 1/8" increments Length Code is 1 = 1/8"- Rotating Piston Rod (Due to Oval Piston Design, Non-Rotating Rod is Standard.) (See Specifications chart.)- Male Rod End (Female Rod End is Std.)- Both ports in the head end in position 1.

CYLINDERBORE3/4"

1" & 1-1/4"

- Magnetic piston for use with PHD Miniature Hall Effect Switches (Model COD)- Extended length wrench flats.- Extra Rod Extension in 1/8" increments Length Code is 1 = 1/8"- Rotating Piston Rod (Due to Oval Piston Design, Non-Rotating Rod is Standard.) (See Specifications chart)- Male Rod End (Female Rod End is Std.)- Both ports located in the head in position 1- Both ports located in the cap in position 1- One port in the head and cap in position 2- Mac 44 Ready Cap for 3/4" bore only- Mac 45 Ready Cap for 1" and 1-1/4" bores only

C 3/4 1/2x R1-T1–

TO ORDER SPECIFY:Product, Series, Type, Design No., Mounting Style,Bore Size, Stroke, and Options.

C O 1 R

DESIGN NO.

1/8" to 2" in1/8" increments

2-1/4" to 4" in1/4" increments

MOUNTING STYLEA - Thru holes with c'bore in the head and capB - Threaded holes in the bottom face of the head and capC - Threaded holes in the face of the capE - Threaded holes in the side face of the head and capF - Drill and c'bore through the head and capR - Threaded holes in the face of the head

TYPEC - Thick cap, wide range of port and mounting optionsD - Thick cap with wide pistonNOTE: Wide piston adds 1/2"to the overall cylinder length andis for use with magnetic option -E4.

CYLINDERSIZE

PRODUCTC - Cylinder

SERIESO - Compact Oval

3/4"1"

1-1/4"

.518

.8581.281

OPTIONS

Standard ports are located in position 5 in the cap.Valves must be customer supplied.See chart at left for ordering numbers.Consult PHD for other Valve-On-Cap configurations.

EFFECTIVEAREA (in )2 E4

F1K __

R1

T1U1U2U6U10U15

MAC VALVE ORDERING NUMBERS

MAC VALVE44A-AAA-xxx-xxx Modification #2484

45A-FA2-xxxx-xxxNOTE: The “x” denotes possible available options. Consult

your local distributor.


7


CLAS

SIC0

6

MODEL COA & COBTHIN CAP

MODEL COC & CODTHICK CAP

* NOTE: CAP IS NOT SYMMETRIC ON 3/4 SIZE UNIT.DIMENSION N IS .118 ON SIDE SHOWN AND .039ON OTHER THREE SIDES.

B

3 1

4

4X C RADIUS 2

A

D THREADE DIA. RODF WRENCH FLAT x .125 LONG(FLAT LOCATION AS SHOWN±10° ON STANDARDNON-ROTATING MODEL)

CYLINDER FASTENERLOCATION - REF

.157

G + STROKE

.236H

K

M

N*P

S

2X 10-32 PORT x .125 DPSTANDARD PORTLOCATION

SWITCH MOUNTING SLOTS

B

4.157

T + STROKE

H

A3 1

2

A

D THREADE DIA. RODF WRENCH FLAT x .125 LONG(FLAT LOCATION AS SHOWN±10° ON STANDARDNON-ROTATING MODEL)

CYLINDER FASTENERLOCATION - REF

1/8 NPT10-32 x .15 FOR 3/4 BORE

NOTES:1) STROKE LENGTH TOLERANCE IS +2 mm/–0 mm2) PORT POSITIONS INDICATED BY CIRCLED NUMBERS

4X C RADIUS

SWITCH MOUNTING SLOTS

H

U

V5

5

DIMENSIONS: SERIES O COMPACT OVAL CYLINDERS

* Refers to piston width.

All dimensions are reference only unless specifically toleranced.

BORE EFFECTIVE LETTER DIMENSIONSIZE AREA (in2) A B C D E F G (NARROW*) G (WIDE*)

3/4 0.518 1.654 1.102 .197 10-32 x .375 DP .314 .250 1.142 1.6421 0.858 2.047 1.339 .276 1/4-28 x .375 DP .394 .312 1.260 1.760

1-1/4 1.281 2.441 1.496 .276 5/16-24 x .500 DP .472 .375 1.260 1.760

BORE LETTER DIMENSIONSIZE H K M N P S T (NARROW*) T (WIDE*) U V3/4 .472 1.575 .965 .118 .177 1.024 1.378 1.878 .472 .7091 .591 1.969 1.260 .039 .177 1.378 1.615 2.115 .669 .709

1-1/4 .591 2.362 1.417 .039 .197 1.614 1.615 2.115 .748 .945

8


CLASSIC06

BORE LETTER DIMENSIONSIZE AE AF AH AG (NARROW*) AG (WIDE*) Z3/4 .807 .236 #6 .983 1.485 .9451 .906 .295 #8 1.162 1.662 1.140

1-1/4 1.024 .295 #10 1.083 1.583 1.280

DIMENSIONS: SERIES O COMPACT OVAL CYLINDERS

STYLE F

STYLE R

STYLE E

STYLE B

STYLE C

STYLE A

Counter bore on head end only on Models COA and COB.

* Refers to piston width.


BORE LETTER DIMENSIONSIZE AA AB AC3/4 8-32 x .47 .551 1.2601 10-24 x .59 .787 1.496

1-1/4 1/4-20 x .59 .945 1.890

BORE LETTER DIMENSIONSIZE AA AB AC3/4 8-32 x .47 .551 1.2601 10-24 x .59 .787 1.496

1-1/4 1/4-20 x .59 .945 1.890

BORE LETTER DIMENSIONSIZE AE AF AG (NARROW*) AG (WIDE*) AI3/4 .768 .236 .985 1.485 8-32 x .311 .906 .295 1.083 1.583 10-24 x .39

1-1/4 1.024 .295 1.083 1.583 1/4-20 x .50

BORE LETTER DIMENSIONSIZE AB AC AM AN3/4 .551 1.260 #8 .201 .787 1.496 #10 .25

1-1/4 .945 1.890 1/4 .30

BORE LETTER DIMENSIONSIZE AF AG (NARROW*) AG (WIDE*) AL3/4 .158 1.063 1.563 10-24 x .281 .217 1.181 1.681 1/4-20 x .35

1-1/4 .217 1.181 1.681 5/16-18 x .44

3 1

4

2

2X AA THREADAB

AC 1 3

4

2

2X AA THREADAB

AC

Z AG+STROKE

3 1

4

2 3X DRILL & C'BORE FORAH SHCS

AF

AE CL

AF

AE1 3

2

4 3X AI THREAD

AG+STROKE

CL

AG+ STROKE

AF

1 3

2

4

2X AL THREADAN

3 1

4

2

2X DRILL & C'BOREFOR AM SHCSAB

AC

9


CLAS

SIC0

6

OPTIONS/DIMENSIONS: SERIES O VALVE-ON-CAP CYLINDERS

MAC 44 AND 45 VALVE READY CAP

Optional valve mounted on the cap provides a compactcylinder/valve package requiring only one air line for the double-acting unit. Valve is customer supplied. Consult your localdistributor for valve options. For the 1" and 1-1/4" bore units,

1-1/4" BORE CYLINDER WITH MAC 45 VALVE (Valve is customer supplied) OPTION – U15

U15U10

1" BORE CYLINDER WITH MAC 45 VALVE (Valve is customer supplied) OPTION – U15

integral flow controls are available as an option on the Mac 45 valve.Consult PHD for other valve brands or combinations.

Maximum operating pressure for a Mac 44 air valve is 120 psi.

3/4" BORE CYLINDER WITH MAC 44 VALVE (Valve is customer supplied) OPTION – U10


NOTE: Two #5-40 UNC-2B x 1-1/4SHCS are required formounting with flowcontrols.Two #5-40 UNC-2B x 7/8SHCS are required formounting without flowcontrols.

2X 1/8 NPTF PORTSIN

EX

.585.93

.661

1.963

3.113

1.02

1.02

.7051.610

.480

1.18

1.819

.30

.765 WITHOUT FLOW CONTROLS

1.08 WITH FLOW CONTROLS

.37

BMAC

A

EE

BA

NOTE: Two #4-40 UNC-2B x 1/2 SHCS are required for mounting.

3X 10-32 UNF PORTS

.394.197

.254 .434.827

1.220

2.595

.975.395

.140 .3101.245

.789.159

MA

CEB

INEA

BA

.504

2X 1/8 NPTF PORTS

INEX

.585.93

.915

2.225

3.355

1.02

1.02

.7051.610

.480

1.18

1.976

.30

.765 WITHOUT FLOW CONTROLS

1.08 WITH FLOW CONTROLS

.37

BMAC

A

EE

BA

NOTE: Two #5-40 UNC-2B x1-1/4 SHCS arerequired for mountingwith flow controls.Two #5-40 UNC-2B x7/8 SHCS are requiredfor mounting withoutflow controls.

10


CLASSIC06

Series AS, AVS, HVS Spherical Mount

®

as, avs, hvs

11

ww

w.phdinc.com

/products/classic • (800) 624-8511

CLASSIC06

ORDERING DATA: SERIES AS, AVS, HVS SPHERICAL MOUNT

3/4", 1", 1-1/8", 1-3/8" BORE SIZES

P-D1-1/8S x -2AV

MOUNTING STYLE

SERIES BORE

AV, HV

3/4"1"

1-1/8"1-3/8"

PROXIMITY SWITCHMOUNTING BRACKETS

SIZE NO.-31-32-33-34

TO ORDER SPECIFY:Series, Mounting Style, Bore Size,Stroke, and Options.

If Spherical Rod End is required,specify with Part Number listed.

BORE SIZE

3/4" BORE1/4" Rod Dia.1/4-28 Thread

1" BORE5/16" Rod Dia.5/16-24 Thread

1-1/8" BORE3/8" Rod Dia.3/8-24 Thread

1-3/8" BORE1/2" Rod Dia.1/2-20 Thread

See Switches and Sensors sectionof PHD’s main catalog for completeordering information.

CYLINDER SERIES

STANDARD STROKE LENGTH1/4" to 6"

strokes available

Longer Strokes Available,Consult PHD.

OPTIONS

AVHVA

- 150 psi Air- 1500 psi Hyd.- 150 psi Air (Series A not available in 1-3/8" Bore.)

B

D

E

M

PV

- Shock Pads on both ends of each cylinder (Not available on Series HVS).- Cushion on both ends of each cylinder (not available on Series HV 3/4", 1", and 1-1/8" sizes or on cap end of 1-3/8" Bore)- Magnetic Pistons for PHD Hall Effect Switches (not available on Series A)- Magnetic Pistons for PHD Reed Switches (not available on Series A)- Port Controls on both ends- Fluoro-Elastomer Seals

S - Spherical mount on cap end

ROD ENDTHREAD SIZE PART NUMBER

1/4" - 285/16" - 243/8" - 241/2" - 20

7113-0017113-0027113-0037113-004

SPHERICAL MOUNT ROD ENDS

12


CLASSIC06

DIMENSIONS: SERIES AS, AVS, HVS SPHERICAL CAP END;3/4", 1", 1-1/8" BORE SIZES

A3/87/169/16

B.468.437.406

C.500.625.718

E16°

13.5°12°

F.281.344.406

G.375.438.500

J.750.812.938

K.251.313.376

L1.4681.5621.844

LBAS

1.750AVS & HVS

2.250

N1.3121.3751.625

O.375.437.500

P Q.375.437.562

LETTER DIMENSIONBORESIZE3/41

1-1/8

R.750.875

1.000

RM.625.750.750

VAS

1.000AVS & HVS

1.500

AS & AVS.125HVS.375

SERIES AS3.3753.4383.562

3.6253.6873.812

BORESIZE3/41

1-1/8

ZW DIMENSIONSERIES AVS SERIES HVS

2.8752.9373.062

A WRENCH FLAT

B AVAILABLEROD END THREAD

SEE NOTES

R DIA K ± .001 DIA

O L ZW + STROKE

N

R DIAK ± .001 DIA

.250

V J

O

G F

E° – ALLOWABLE ANGLEOF MISALIGNMENT

Q DIA

RM DIA .500 P + STROKE

2X 1/8 NPTE° – ALLOWABLE ANGLEOF MISALIGNMENT

C DIABALL

C DIABALL

GF

LB + STROKE.750 .500

ROD SPHERICAL END: SPHERICAL END ON CYLINDER ROD NOT INCLUDED - MUST BE ORDERED SEPARATELYCUSHIONS: ADD 1/2" TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSHOCK PADS: ADD 1/4" TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PADSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO ALL (+ STROKE) DIMENSIONS (2 x STROKE)

All standard rod ends have four wrench flats.

13


CLAS

SIC0

6

DIMENSIONS: SERIES AS, AVS, HVS SPHERICAL CAP END;3/4", 1", 1-1/8" BORE SIZES

3.812 + STROKE

.656

.625 .500

.750 DIA

1.250 DIA 2.438 + STROKE

.938DIA

BALL

.625.500

1.375 .688

3/4 WRENCH FLAT

.531 AVAILABLEROD END THREAD

SEE NOTES

1.312 DIA .501 ± .001 DIA

5.750 + STROKE

2.125

1.312 DIA.501 ± .001 DIA

.250

.438

.656

1.250

2.437

1.031

.265

.938DIA

BALL

12° – ALLOWABLE ANGLEOF MISALIGNMENT

12° – ALLOWABLE ANGLEOF MISALIGNMENT

2X 1/4 NPT

ROD SPHERICAL END: ROD SPHERICAL END IS NOT INCLUDED - MUST BE ORDERED SEPARATELYCYLINDER ROD END: CYLINDER ROD END WILL HAVE 1/2-20 THREADCUSHIONS: AVAILABLE ON ROD END ONLY (-DR). CYLINDER LENGTH IS NOT AFFECTEDSHOCK PADS: ADD 1/4" TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PADSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO ALL (+ STROKE) DIMENSIONS (2 x STROKE)

All standard rod ends have four wrench flats.

14


CLASSIC06

Series EA, EH, EL, ESHeavy Duty Cylinder

EA, EH, EL, ES

®

15

ww

w.phdinc.com


CLASSIC06

ORDERING DATA: SERIES EA, EL, EH, ES CYLINDERS3/4", 1-1/8", 1-3/8" BORE SIZES

EA x - P2MS4 - D 5/8 ROD F-M-V

MOUNTING STYLE OPTIONS

SERIES BORE

EA, EL3/4"

1-1/8"1-3/8"


SIZE NO.-35-36-37

TO ORDER SPECIFY:Series, Mounting Style, Bore Size,Stroke, Port Controls, Cushions andShock Pads, Oversize Rod, and Options.

SERIES

BORE SIZE

3/4" BORE3/8" Std. Rod Dia.

1/4-28 Thread

1-1/8" BORE1/2" Std. Rod Dia.

3/8-24 Thread

1-3/8" BORE5/8" Std. Rod Dia.7/16-20 Thread


CUSHION OR SHOCK PAD

OVERSIZED ROD

1-1/8 and 1-3/8" Bore onlyTo be specified only whenusing a non-standard roddiameter.

See Switches and Sensors sectionof PHD’s main catalog forcomplete ordering information.

1-1/8 - -

BUILT-IN METER OUTFLOW CONTROL VALVE

STOCK STROKE LENGTHS1/2" to 6"

in 1/2" increments

Longer Strokes Available,Consult Factory.

(Cushions and Shock Pads arenot available on the same endof cylinder. Shock Pads are notavailable for Hydraulic use.)

DDRDCBBRBC

- Cushions on both ends- Cushion on rod end- Cushion on cap end- Shock Pads on both ends- Shock Pad on rod end- Shock Pad on cap end

EAELEHES

- 150 psi Air- 500 psi Hyd.- 3000 psi Hyd.- 5000 psi Hyd.

PPR

PC

- Flow control both ends- Flow control on head end

Not available on MT1- Flow control on cap end

Not available on MT2

MS2

MS4

MF1MF2MT1MT2MP1MR1

- Foot Mount through holes Not available on 1-1/8" and 1-3/8" ES Series- Bottom Mount, Tapped holes in head and cap- Rod End Flange- Cap End Flange- Head Trunnion- Cap Trunnion- Clevis Mount, Cap end with pin- Rod Mount, Tapped holes on front face of head

AE

FIJ

_KLM

NRTUVWZ1

- Stroke Adjustment (1/2" standard)- Magnetic Piston for PHD Hall Effect Switches (Series EA and EL only)- #1 Rod End (See Note 1)- #4 Rod End, female thread on rod (See Note 1)- #2X Rod End, twice as long as standard thread (See Note 1)- Extra Rod Extensions (See Note 2)- Coarse Thread Rod End (See Note 1)- Magnetic Piston for PHD Reed Switches (Series EA and EL only)- Plain Rod End (See Note 1)- Port in Position 2- Port in Position 3- Port in Position 4- Fluoro-Elastomer Seals- Close Tolerance Stroke, ± .005 stroke length- Electroless Nickel Plate all ferrous parts excluding rod ends

NOTE: SAE Ports available. Consult PHD for sizes.

DOUBLERODEND

D

Notes:1) For double rod cylinders, rod end options

will be applied to both ends of cylinder.2) For double rod cylinders, -_K extension will

be applied to one end only (headend/primary mounting end).

16


CLASSIC06

DIMENSIONS: SERIES EA, EH, EL, ES CYLINDER 3/4", 1-1/8", 1-3/8" BORE SIZES

4X RT THREAD

BD SQ

MS4

MF2

MS2

MT2

MR1

MF1

MP1 (CLEVIS PIN INCLUDED)

MT1

E SQ

RM DIA

4

2

13

BASIC CYLINDER DIMENSIONS

FT THREAD

A

.250

Y1

ZB + STROKE

P + STROKE

LB + STROKEGAMM ROD DIA

WA

1.125

2X EE NPT

K

D WRENCH FLAT

V

2

3

4

1

SN+ STROKE

4X NT* THREAD

XT

TN

1

2

3

4

RM DIA+.000- .005

TF

R E

F3

1ZB + STROKE

UF

4

TF

2

4X FB DIA THRU

R E

F3

1 ZF + STROKE

UFW

RM DIA+.000- .005

V

4 2

TSUS

4X FBDIA THRU

3

1

24ST

SY

XS SS+ STROKE

SU

SYSU

EUT

3

1

24

TL EUT

3

1

24

TL

TD DIA+.000- .001

BOTH SIDES

XGXJ + STROKE

TD DIA+.000- .001

BOTH SIDES

1

4

3

2

CC DIA

CBCL

XC + STROKE

MR RAD

LM

CD DIA THRU

All standard rod ends have four wrench flats (two wrench flats with “I” option).

PORT POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF CUSHIONS

MT1 (-DR) & MT2 (-DC) CUSHION NEEDLES ARE IN POSITION 3SHOCK PADS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF SHOCK PADSMS2 MTG. STYLE: NOT AVAILABLE ON 1-1/8" & 1-3/8" SERIES ES CYLINDERS*MS4 MTG. STYLE: UNITS WITH OPTION -R OR -U WITH/-P. THE NT THREAD SIZE AND DEPTH WILL BE REDUCED AS FOLLOWS: 3/4" BORE NOT AVAILABLE WITH -ROR -U WITH/-P. 1-1/8" BORE NT=10-32 x .19, 1-3/8" BORE NT=1/4-28 x .25

10-32 X .25 DP1/4-28 X .50 DP5/16-24 X .62 DP

LETTER DIMENSION

3/41-1/81-3/8

A.750.750.750

BD1.0001.2501.625

CB.375.500.625

CC1.0001.2501.750

CD.375.500.625

CL.8751.1251.500

D.312.438.562

E1.3751.7502.250

EE1/41/43/8

.312

.500

.500

F FB.219.281.344

FT1/4-283/8-247/16-20

GA1.8122.1882.625

K0.00.250.312

L.500.625.750

LB4.0004.3754.812

M.375.500.625

MM.375.500.625

MR.570.720.910

NT*10-32 X .25 DP1/4-28 X .31 DP5/16-24 X .50 DP

P2.1882.3122.438

R.9381.2501.625

RM.7501.0001.250

RTBORESIZE

LETTER DIMENSION

3/41-1/81-3/8

SN2.1882.3122.438

SS1.062.938.938

ST.281.344.469

SU.250.312.438

SY.500.8121.062

TD.500.750.875

TF1.9382.5003.000

TL.500.750.875

TN.562.625.875

1.9382.5003.000

TS UF2.3753.0003.750

US2.3753.0003.750

UT2.3753.2504.000

V.125.250.250

W.6881.0001.000

WA.156.219.250

XC4.8755.5006.062

XG1.6252.0622.438

XJ3.8124.3754.875

XS2.1882.7503.188

XT1.6252.0622.438

Y11.2501.5621.938

ZF4.6885.3755.812

BORESIZE ZB

4.3755.1255.625

4X FB DIA THRU

17


CLAS

SIC0

6

DIMENSIONS: SERIES EA, EH, EL, ES CYLINDER DOUBLE ROD END

E SQ

RM DIA

4

2

13


FT THREAD

A.250

Y1

ZR + (2 x STROKE)

P + STROKE

LB + STROKEGAMM ROD DIA

WA BOTH ENDS

GA

2X EE NPT

K

D WRENCH FLAT

V BOTH ENDS

A

MS4

MS2

MR1

MT1

2

3

4

1

SN+ STROKE

4X NT* THREAD

XT

TN

TSUS

4X FBDIA THRU

3

1

24ST

SY

XS SS+ STROKE

SU

SYSU

EUT

3

1

24

TLTD DIA+.000

- .001BOTH SIDES

XG

3/41-1/81-3/8

SN2.1882.3122.438

SS1.062.938.938

ST.281.344.469

SU.250.312.438

SY.500.8121.062

TD.500.750.875

TF1.9382.5003.000

TL.500.750.875

TN.562.625.875

1.9382.5003.000

TS UF2.3753.0003.750

US2.3753.0003.750

UT2.3753.2504.000

V.125.250.250

W.6881.0001.000

WA.156.219.250

XG1.6252.0622.438

XS2.1882.7503.188

XT1.6252.0622.438

Y11.2501.5621.938

BORESIZE ZR

5.4386.4387.312

LETTER DIMENSION

3/41-1/81-3/8

A.750.750.750

BD1.0001.2501.625

BORESIZE

LETTER DIMENSIOND

.312

.438

.562

E1.3751.7502.250

EE1/41/43/8

.312

.500

.500

F FB.219.281.344

FT1/4-283/8-247/16-20

GA1.8122.1882.625

K0.00.250.312

LB4.6875.4376.312

MM.375.500.625

NT*10-32 X .25 DP1/4-28 X .31 DP5/16-24 X .50 DP

P2.1882.3122.438

R.9381.2501.625

RM.7501.0001.250

RT10-32 X .25 DP1/4-28 X .50 DP5/16-24 X .62 DP

MF1

4X RT THREAD

BD SQ

1

2

3

4

RM DIA+.000- .005

PORT POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF CUSHIONS MT1 (-DR) CUSHION NEEDLES ARE IN POSITION 3SHOCK PADS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF SHOCK PADSMS2 MTG. STYLE: NOT AVAILABLE ON 1-1/8" & 1-3/8" SERIES ES CYLINDERS*MS4 MTG. STYLE: UNITS WITH OPTION -R OR -U WITH/-P. THE NT THREAD SIZE AND DEPTH WILL BE REDUCED AS FOLLOWS:3/4" BORE NOT AVAILABLE WITH -R OR -U WITH/-P. 1-1/8" BORE NT=10-32 x .19, 1-3/8" BORE NT=1/4-28 x .25


TF

R E

3

1

UF

4 2

F

ZR + (2 x STROKE)

WRM DIA+.000

- .005

V4X FB DIA THRU

18


CLASSIC06

Series NEAG, and NEHGHeavy Duty, Non-Rotating Cylinders

®

NE

19

ww

w.phdinc.com


CLASSIC06

SC x - P2NEAG - B N-V-Z

SERIES BORE

NPG, NHG

NEAG, NEHG

1-1/8"1-3/8"1-1/8"1-3/8"


SIZE NO.-33-36-36-37

TO ORDER SPECIFY:Spring Return, Series,Mounting Style, Bore Size,Stroke, and Options.

See Switches and Sensors sectionof PHD’s main catalog forcomplete ordering information.

MF1 1-1/8 -

NOTE: SAE Ports available. Consult PHD for sizes.

MOUNTING STYLEMF1MF2MT1MP1

MR1

MS2MS4

- Head End Flange- Cap End Flange- Head Trunnion- Clevis Mount, Cap end (furnished with pin)- Rod Mount, Tapped holes front face of head- Foot Mount through holes- Bottom Mount - 4 holes total Tapped in head and cap

STOCK STROKE LENGTHS1/2" to 6"

in 1/2" increments

Longer Strokes Available,Consult PHD.



(Cushions, Shock Pads, andSpring Return are not availableon the same end of cylinder.Shock Pads are not availablefor Hydraulic use.)

DDRDCBBRBC

- Cushions on both ends- Cushion on rod end- Cushion on cap end- Shock Pads on both ends- Shock Pad on rod end- Shock Pad on cap end

OPTIONS

E

HM

NSVWZ1

- Magnetic Piston for PHD Hall Effect Switches (not applicable on Series NEHG)- Plain keyed rod end- Magnetic Piston for PHD Reed Switches (not applicable on Series NEHG)- Plain Rod End- Keyed and Threaded Rod End- Fluoro-Elastomer Seals- Close Tolerance Stroke, ± .005 Stroke Length- Electroless Nickel Plate all ferrous parts

PORT CONTROL®

BUILT-IN METEROUT FLOW

CONTROL VALVEP

PR

PC

- Flow control both ends- Flow control on head end- Flow control on cap end

BORE SIZE

1-1/8" BORE5/8" Rod Dia.

7/16-20 Threads


9/16-18 Threads

CYLINDER SERIES

NEAGNEHG

- 150 psi Air- 3000 psi Hydraulic

1

DIMENSIONS: SERIES NE HEAVY DUTY; 1-1/8", 1-3/8" BORE

20


CLASSIC06

DIMENSIONS: SERIES NE HEAVY DUTY; 1-1/8", 1-3/8" BORE

SN + STROKEXT

TN

4X NT THREAD

MS4

MF2

MR1

MF1

MS2

MT1

E SQ

RM DIA

4

3 1

2

P + STROKE

MM ROD DIA

FT THREAD

WA

A.375

ZJ + STROKE

LB + STROKE

2X EE NPT

GA 1.125D WRENCH FLAT

K

.250

Y1

2

3

4

1

ZF + STROKE

.500

R

TF

E

UF

4

1

2

4X FBDIA THRU

3

SYSYSU

SUXS .938

+ STROKE

TSUS

4

1

2

3ST

4X FBDIA THRU

UT

4

1

2

3E

XG

TD+.000 -.001 DIA

BOTH SIDES

TL

1-1/81-3/8

RT.312.438

SN ST SU SY TD TF TL TN TS UF US UT WABORESIZE

2.3122.438

1/4-28 x .50 DP5/16-24 x .63 DP

.375

.500.8121.062

.750

.8752.5003.000

.750

.875.625.875

2.5003.000

3.0003.750

3.0003.750

3.2504.000

.250

.312

LETTER DIMENSIONXC

5.6256.188

XG2.1882.562

XS2.8753.312

XT2.1882.562

Y11.5621.938

ZF5.5005.938

ZJ5.2505.750

1-1/81-3/8

A.7501.000

BD1.2501.625

BORESIZE

LETTER DIMENSIONCB

.500

.625

CC1.2501.750

CD.500.625

1.1251.500

CL D E EE FB FT GA K L LB M.500.625

1.7502.250

1/43/8

.281

.3447/16-209/16-18

2.1882.625

.250

.312.625.750

4.3754.812

.500

.625

MM.625.750

MR.720.910

NT1/4-28 x .31 DP5/16-24 x .50 DP

P2.3122.438

R1.2501.625

RM1.0001.250

R

TF

E

UF

4

1

2

4X FB DIA THRU

3

.250ZJ + STROKE

1.125RM

+.000 -.005 DIA .500

1

2

3

4 BD SQ

4X RT THREAD

RM+.000 -.005DIA

1

4

3

2

CC DIA

CBCL

XC + STROKE

MR RAD

L

M

CD DIA THRU

MP1 (CLEVIS PIN INCLUDED)


PORT POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: ADD 1.000 TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSHOCK PADS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF SHOCK PADS


All dimensions are reference only unless specifically toleranced.All dimensions are reference only unless specifically toleranced.

21


CLAS

SIC0

6


Series RFS, RCC, or RAS/RLSSee PHD’s main catalog.

Series 0180 Miniature Rotary Actuators0180

22


CLASSIC06

TO ORDER SPECIFY:Series, Size, Type, Design No.,Options, and Seals.

1

TYPE1 - Single Rack2 - Double RackT - TandemNOTE: 018x50,018375, and 018875are available in -2double rack only.

- - 0 1

OPTIONS0 - No Sensor3 - Sensor Transducer with Transition Plate

175MODEL NUMBER

SIZE50 - 1/2" [12 mm] Bore75 - 3/4" [19 mm] Bore

DESIGN NO.1 - 018x753 - 018x50

SEALS1 - Buna-N (standard)2 - Fluoro-Elastomer

SERIES NUMBER FOR PORT & MTG. HOLE TYPEIMPERIAL METRIC POSITION

0 5 2 Position Actuator3 8 3 Position Actuator -(Not

available on Size 50)

NOTES:1) Sensor must be used with a PHD Set Point

Module. See Switches and Sensors sectionfor information and ordering data.

0018

UNITS WITH IMPERIAL SHAFTS AND KEYWAYS

1

TYPE1 - Single Rack2 - Double RackT - TandemNOTE: 018x50, and018975 are availablein -2 double rack only.

- - 0 1

OPTIONS0 - No Sensor3 - Sensor Transducer with Transition Plate

175MODEL NUMBER

SIZE50 - 1/2" [12 mm] Bore75 - 3/4" [19 mm] Bore

DESIGN NO.1 - 018x75x3 - 0186502

SEALS1 - Buna-N (standard)2 - Fluoro-Elastomer

NOTES:1) Sensor must be used with a PHD Set Point

Module. See Switches and Sensors sectionfor information and ordering data.

6018

UNITS WITH METRIC SHAFTS AND KEYWAYS

SERIES NUMBER FOR PORT & MTG. HOLE TYPEIMPERIAL METRIC POSITION

— 6 2 Position Actuator— 9 3 Position Actuator -(Not

available on Size 50)

TO ORDER SPECIFY:Series, Size, Type, Design No.,Options, and Seals.

ORDERING DATA: MINIATURE ROTARY ACTUATORS

23

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES 018x75x M

INIATURE ROTARY ACTUATORS

.500[12.7]

2.375 [60.5]4.750 [121] ANGLE LIMITING SEGMENT

AUXILIARY MTG LOCATIONLIMITS ROTATION TO 45° FROMMIDPOINT OF ROTATION

1.500[38.1]

.250[6.3]

SHAFT STOP PIN

ANGLE LIMITING SEGMENTS ALLOW180° MAX ROTATION0° MIN ROTATION

2X REF CAP AREA

1.500[38.1]

10-24 [M8 x .5]THREAD x .375 [10] DP4X TOP & BOTTOM

2.000 [50.8].875[22.2]

10-32 THREAD x .312[M5 x .8] DP

2.500 [63.4]10-24 [M5 x .8]THREAD x .250 [6.3] DP4X FRONT & BACK

2.000[50.8]

1.000[25.4]

BASIC DIMENSIONSSERIES 018x75x & 018x752 UNITS

4.250 [107.9]

.310[7.9] 1.000

[25.4] SQ

.810[20.6]

2.125 [53.97]

.500[12.7]

4.250 [107.6]2X 1/8 NPT

[1/8 BSP]

.190[4.8]

1.500[38.1]

.810[20.6]

2.125 [53.8]

SINGLE RACK UNITSERIES 018x751

DOUBLE RACK UNITSERIES 018x752

AIR/OIL TANDEM UNITSERIES 018x75T

.500[12.7]

2.000 [50.8]

2X 1/8 NPT[1/8 BSP]

2X 1/8 NPT[1/8 BSP]

.375 [9.53]

NOTES:1) ALL DETAILS SHOW UNITS AT MID-ROTATION2) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm.

FOR SHAFTDETAILS SEE

PAGE 3C-5

2.125 [53.9]

.310[7.9]

1.000[25.4]

.810[20.6]

2.125[53.9]

CHECK VALVE FITTING

2.000[50.8]

.500[12.7]

1.000[25.4].188

[4.8]

2X THRU HOLE FOR #8 [M4] SCREW

RESERVOIR ASSEMBLY ISINCLUDED WITH UNIT ANDSHIPPED WITH 3 FEET[1 m] OF FLEXIBLE TUBING 3.62

[92]

.937[23.8]

.687[17.4]

.750[19]

1.000[25.4]

1.000[25.4]

1.000[25.4]

1

3

42

1

3

42

42


24


CLASSIC06

DIMENSIONS: SERIES 018x752 3 POSITION MINIATURE


.750

[19]

.500

[12.

7]

2.37

5 [6

0.3]

5.00

0 [1

27]

2.50

0 [6

3.5]

MAX

.906

[23]

DIA

TYP

2.12

5 [5

3.8]4.

250

[107

.06]

2X A

DJUS

TMEN

T CO

NTRO

L KN

OBFO

R LO

CATI

ON O

F TH

IRD

POSI

TION

ANGL

E AD

JUST

MEN

TS.3

10[7

.9]

1.00

0[2

5.4]

1.57

7 [4

0]

MUL

TI-P

OSIT

ION

UNIT

SERI

ES 0

18x7

52

1.00

0[2

5.4]

NOTE

S:1)

ALL

DET

AILS

SHO

W U

NITS

AT

MID

-ROT

ATIO

N2)

NUM

BERS

IN [

] ARE

FOR

MET

RIC

UNIT

S AN

D AR

E IN

mm

.

1 3

42

42

CB1

AB2

IIII

POR

TS P

RES

SUR

IZED

B 1 &

B2

II

PORT

PRE

SSUR

IZED

- A

FULL

CCW

POS

ITIO

NPO

RT P

RESS

URIZ

ED -

CFU

LL C

W P

OSIT

ION

T°

R°

I°MIDPOINTADJUSTMENTSTOPS

LOCKING SCREWSHOLD MIDPOINTADJUSTMENT IN PLACE

VIEW FROM FRONT OF UNIT

B1C

B2A

IIII

II

OPERATING PRINCIPLEThe PHD Three Position Rotary Actuator yields three output

shaft positions. Both the extreme positions and the midposition canbe adjusted in the field allowing a total rotation from 0° to 180° withthe midpoint anywhere between. Pressurizing port C provides fullcounterclockwise rotation (position I). Pressurizing ports B1 and B2at the same time causes the unit to rotate to position II and to holdat that position. The racks are trapped by the piston and rods (B1and B2) and hold the pinion from rotating, creating the positivemidposition. The midpoint adjustment stops allow the midpoint tobe set by changing the lengths that each piston and rod can stroke.Position III is obtained by pressurizing port A driving the pinionshaft to a full clockwise position.

Output positions can be selected in any sequence allowing theactuator to stop at or pass by the midposition.

SHAFT DETAIL FOR 018x75x

SERIES018075x018375x018575x018875x018675x018975x

ADIMENSION

B C+ .000- .001.375

+ .000- .0259.53

.375

[9.53]

+ .0000- .0003.3939

+ .000- .00710

—

204WoodruffKeyway

3 mm SQx 16 mm LG

B

A Ø

C KEYWAY

IMPERIAL SHAFTS

A Ø

C KEYWAY

METRIC SHAFTS

25

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES 018x502 M

INIATURE ROTARY ACTUATORS

.750[19]

1.000[25.4]

NOTE: NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm.

SERIES

018050018550

018650

ADIMENSION

B C+ .000- .001.250

+ .000- .0256.35

.312

[7.92]

+ .0000- .0003.2362

+ .000- .0076.0

—

203WoodruffKeyway

2 mm SQx 14 mm LG

B

A Ø

C KEYWAY

IMPERIAL SHAFTS

A Ø

C KEYWAY

METRIC SHAFTS

ANGLE LIMITING SEGMENTAUXILIARY MTG LOCATION.LIMITS ROTATION TO 45° FROMMIDPOINT OF ROTATION

ANGLE LIMITING SEGMENTSALLOW 180° MAX ROTATION0° MIN ROTATION

2X 10-32 [M5 x .8] PORT -BARB FITTING

FOR 1/16 [1.6] ID TUBE SUPPLIED

6-32 THREADx .250 [M3 x 6] DP

8-32 THREAD x .250 [M4 x 6] DP4X TOP & BOTTOM

.250[6.3]

SEE DETAILBELOW

1.500 [38.1].594[15]

.312 [7.9].750[19]

8-32 THREAD x .187 [5][M4 x .7] DP4X FRONT & BACK

2.000 [50.8]1.500 [38.1]

1.500[38.1]

1.109[28.2]

2.219 [56.4]1.500 [38.1]

3.000 [76.2]

DOUBLE RACK UNITSSERIES 0180502

SHAFT KEYWAY: SHOWN AT MID-ROTATION - WOODRUFF KEY IS SUPPLIED WITH ALL ACTUATORSROTATION: 180° MAXIMUMPORT POSITIONS: INDICATED BY CIRCLED NUMBERSPORT CONTROLS: NOT AVAILABLE ON SERIES 0183752, 0188752 & 018x502 UNITS. PORT CONTROLS ARE

STANDARD ON ALL OTHER ACTUATORS.MTG. HOLES: CENTERED ON CENTERLINE OF ACTUATOR BODY

.750[19]

1

3

42

26


CLASSIC06

We recommend Series CTS Compact Guide Rod Cylinders.For more information, see PHD’s main catalog.

BENEFITS■ The compact size of the Series CTS Compact Guide Rod Cylinder

makes it ideal for non-rotating cylinder applications where unitlength is critical. The CTS also performs as a light duty slidewhere precise location is not required and side loading is limited.

■ Compact Guide Rod Cylinders prevent rotation of toolingconnected to cylinder.

■ Standard tool plate allows easy mounting of PHD Series 190 &191 Grippers.

■ Optional blank tool plate is available for customers to add theirown mounting pattern.

■ Diagonal tool plate allows front mounting of the cylinder whilestill permitting full tool plate retraction.

■ Thru and threaded holes for easy cylinder mounting.

■ Flange brackets and optional accessories provide additionalmounting flexibility.

■ Field repairable for extended life.

■ Nitrile piston and rod seals for long life and low maintenance.

■ Optional fluorocarbon seals for fluid compatibility. Consult PHDfor high temperature use.

■ Optional shock pads extend cylinder life and minimize pistonnoise in applications where the piston contacts the head and/orcap. The shock pad design adds no additional length to thecylinder.

■ Switches may be mounted on three sides of the cylinder formaximum flexibility (two sides for 12 and 16 mm sizes) andprovide a signal on extension and retraction with strokes asshort as 1/8 inch [5 mm].

27


CLAS

SIC0

6

Series N Compact Slides


Series CTS Cylinders.See PHD’s main catalog.

N

28

ww

w.phdinc.com


CLASSIC06

2


SC x - P3NAV - D

BORE3/4

1-1/8

SIZE NO.-31-33

TO ORDER SPECIFY:Spring Return, Three Position Unit, Series,Bore, Slide Travel, Mid-Position Travel,Port Control, and Options.

SERIES

SLIDE TRAVEL1/4" to 5" in 1/4" incrementsTotal slide travel from retract

position 1 to extend position 3


See Switches and Sensorssection in PHD’s main catalogfor complete ordering information.

1-1/8 - E

(Cushions, Shock Pads, andSpring Return are not availablewith -A option or on same end.)

DDRDCBBRBC

- Cushions on both ends- Cushion on rod end- Cushion on cap end- Shock Pads on both ends- Shock Pad on rod end- Shock Pad on cap endNA

NAVNHVNTD

- 150 psi Air- 150 psi Air- 1500 psi Hyd.- 150 psi Air/Oil Tandem

3

THREE POSITION UNIT(specify only if needed)

x

Travel from retract position 1to mid-position 2

MID-POSITION TRAVELSpecify for 3 position units.

OPTIONSA

E

I

M

VWX

Z1

- Stroke adjustment (1/2" standard) - NA, NAV, NTD only- Magnetic Piston for PHD Hall Effect Switches - NAV, NHV, NTD only- Crossover with Reservoir plumbed, filled,

and bled of air - NTD only.- Magnetic Piston for PHD Reed Switches - NAV, NHV, NTD only- Fluoro-Elastomer seals- Close Tolerance Travel, ± .005 travel length- Crossover tube filled with oil and bled of air -

NTD only- Electroless Nickel Plate, all ferrous parts,

excluding rod ends

BORE SIZE

3/4" BORE1/4" Rod Dia.


SPRING RETURN(specify only if needed)

SC - Spring Return on the cap endSC not available with -A option.SR - Spring Return on the rod end

PPRPC

PORT CONTROL OPTIONS- Flow controls on both ends- Flow control on rod end- Flow control on cap end

ORDERING DATA: SERIES N SLIDES

3 POSITION DETAIL

RETRACT

MID-POSITION(CYL. 2 TRAVEL)

EXTEND(CYL. 1 TRAVEL)

3 1

2

!Options may affect unit length.See unit dimension and optionspages for adders.

29

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES N SLIDES

LETTER DIMENSIONQ

#10 x .215 DP5/16 x .215 DP

AB* B*

MTG HOLES: CENTERED ON CENTERLINE OF CYLINDEROPTIONAL SPRING RETURN: ALL STROKE DIMENSIONS ARE 2 x DESIRED STROKE LENGTHEXAMPLE: DIMENSION “B”+ (2 x DESIRED STROKE)

AC*

AC* + TRVL CYL#1 + TRVL CYL#2

3X 1/8 NPT

3NAV4.3124.312

N SQM

AB* + TRAVEL

B* + TRAVEL .940

1.125RETRACTED

.375

L

.4702X THRU DIA & C'BOREFOR Q SHCS

P SHAFT DIA

O

2X 1/8 NPT

3NA, 3NAV (3 POSITION) DETAIL

CD

K

E

G

2.500 + TRAVEL

.080E

4X THRU DIA & C'BORED FROMOPPOSITE SIDE FOR J SHCS

HF

5.000* + (2 x TRAVEL)

4X 1/8 NPT

NTD (TANDEM) SERIES DETAIL

SLIDESERIES

NxxNxx

BORESIZE3/4

1-1/8

NA2.6902.690

NA1.7501.750

NAV, NHV3.1903.190

NAV, NHV2.2502.250

D1.5602.120

C1.6402.200

E.600.875

F1.7502.500

G.280.390

H1.0001.500

J#6#8

K.500.750

L1.2501.750

M.125.187

N1.0001.500

N1.0001.500

O.812

1.062

P.250.375

3NA3.3123.312

All Cylinder rod ends have four wrench flats.*ADD 1/4" FOR EACH SHOCK PAD; ADD 1/2" FOR EACH CUSHION


30


CLASSIC06

We recommend Series SD & SE Slides.For more information, see PHD’s main catalog.

BENEFITS■ Linear ball bushings or PHD’s TC fluoropolymer composite bushings

are available in each series providing the best value with the leastpossible slide deflection.

■ Four bushings allow two hardened precision ground shafts to movesmoothly while supporting the tool plate and attached loads, providingrugged precise linear motion.

■ Oversized guide shafts are available with TC bushings for maximumrigidity and minimum deflection.

■ Linear ball bushings provide optimum tool plate accuracy.

■ TC bushings are supplied with internal lubrication for maximum life.

■ Shaft seals are provided on units with linear ball bushings to protectthem from external contamination.

■ Available in five sizes each with an oversized shaft available on eachsize to fit a wide range of linear motion applications.

■ Anodized aluminum alloy tool plates have combination tapped andcounterbored holes and a precisely machined mounting surface,permitting easy attachment of fixturing.

■ Units are powered by PHD Cylinders for long life and a wide range ofcontrol and switch accessories.

■ Options include travel adjustments, shock pads, HushStop™ pads,built-in speed controls (Port Control®), and cushions to fit the slide toyour specific requirements.

■ PHD Reed and Hall Effect Switches and industrial proximity switches areavailable for easy interfacing to electronic controls and logic systems.

■ Ports, Port Control, cushion, switch adjustments, and traveladjustment are on one side for easy access.

■ PHD cylinders are equipped with new long life Buna-N seals. This willreduce maintenance cost and improve cylinder performance.

■ The HushStop™ shock pad option provides significant noise reduction,up to 50%, dependent upon the slide type, size, and your specificapplication.

BENEFITS■ All SK and SL Slides can have either linear ball bushings or

TC fluoropolymer composite bushings to provide optimum perfor-mance with minimum slide deflection for all types of applications.

■ SK and SL Slides are available in six sizes for application to a widerange of tasks.

■ Four bushings allow the hardened and precision ground shafts to movesmoothly, ensuring rugged, precise linear motion of the tool plate andload.

■ Oversize guide shafts are available with TC bushings for maximumrigidity and minimum deflection.

■ Linear ball bushings and TC bushings have internal lubrication formaximum life.

■ Linear ball bushings provide lowest friction, highest load capacity, andoptimum accuracy of tool plate motion.

■ Units with linear ball bushings have shaft wipers to exclude externalcontaminants.

■ Anodized aluminum alloy tool plates with combination tapped andcounterbored holes and a precisely machined mounting surface permiteasy attachment of tooling.

■ Slides are available without a cylinder and supplied with completehardware for mounting standard VDMA/ISO cylinders.

We recommend Series SK & SL Slides.For more information, see PHD’s main catalog.

■ Series SK and SL Slides are provided with Series CV Cylinders (sizes72 - 76 only) which provide the following advantages:

✔ Units specified with the Hushcontrol® Advantageprovide superb speed and deceleration control andenvironmentally friendly noise levels.

✔ Internal shock pads are standard.

✔ Wide range of options.

✔ Optional Rodlok®

✔ See additional benefits in the Series CV catalog.

■ Provisions for 8 mm or 12 mm proximity switches are standard on allunits.

■ Dowel pin holes are standard on housings and tool plates, and areavailable with a variety of optional fits.

■ Units bolt and dowel directly to metric Series SG gantry slideswithout need of a transition plate. (sizes 71-75 only)

31


CLAS

SIC0

6

Series T, TS08 Slides

SERIES T

SERIES TS08


Series SD/SE & SK/SL Slides.See PHD’s main catalog.

T, TS08

32

ww

w.phdinc.com


CLASSIC06

TS

SIZE03 - 3/8" Shaft04 - 1/2" Shaft06 - 3/4" Shaft

TO ORDER SPECIFY:Three Position Unit, Model, Size,Design No., Slide Travel, Mid-Position Travel,Tool Plate Extension, and Options.

03 1 x 2 x 1 - - M-V

DESIGN NO.

MODELTS - Slide - 150 psi Air max.TH - Slide - 150 psi Hyd. max.TT - Tandem - Air/oil cylinder with 150 psi Air max.

TOOL PLATE EXTENSIONAdditional distance between tool plate andbearing block in 1" increments. Leaveblank if no additional extension is required.

CYLINDER OPTIONS

NOTES:1) Cylinders are Series AV, HV, or TD.2) Port Controls are standard on all models.3) Shock pads available on TS models only.4) -B not available with -A, -L, -N, or -D.5) -N uses shock pads along with the stop collars on the shafts.6) -D not available with -A, -L, -N, -B, or on the TT model.7) Metric versions available. Contact PHD for specifications and literature. See Switches and Sensors

section in PHD’s main catalog forcomplete ordering information.

SLIDE SIZE SIZE NO.030406


A

SLIDE TRAVEL(1" increments)

03 - 1" to 6"04 - 1" to 8"

06 - 1" to 12"Consult factory forlonger travel lengths.Total slide travel fromretract position 1 toextend position 3.

-31-33-34

H1BDEMV

- Slide with no cylinder supplied- Shock Pads on both ends (TS Models only)- Cushions on both ends (TS Models only)- Magnetic Piston (Hall Effect)- Magnetic Piston (Reed)- Fluoro-Elastomer Seals

OPTIONS- Travel Adjustment on extension and retraction- Crossover with Reservoir plumbed, filled, and bled of air (TT model only)- Close fit dowel pin holes in the tool plate- Normal fit dowel pin holes in the tool plate- Travel Adjustment on retraction- Travel Adjustment on extension- Corrosion resistant guide shafts- Close fit dowel pin holes in the slide body- Normal fit dowel pin holes in the slide body- Crossover tube, unit filled with oil and bled of air (TT Model only)NOTE: See dimension pages for locations and tolerances of dowel pin holes.

AI

J1J2LNQR1R2X

3


x 1


Travel from retractposition 1

to mid-position 2.

ORDERING DATA: SERIES T SLIDES3 POSITION DETAIL

RETRACT



3 1

2


33

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES T SLIDES

A2.2503.0003.812

AB*4.5005.2507.625

AB27.2508.00012.375

B*2.2502.2503.812

B25.0005.0008.562

C1.0001.5001.750

D3.7504.2505.625

E3.2503.6254.875

F3.8754.3755.750

G.500

1.0001.125

H1.0001.5001.875

J.250.375.250

K2.0002.7503.500

L1.1251.6252.000

M.812

1.1251.500

N1.5002.0003.000

O.750. 8751.125

P.875

1.0001.250

Q#101/4

5/16

R.500.625.875

S1.2501.5002.000

U.875.875.938

V1.0001.5001.875

W2.6253.1254.000

X.375.500.750

Y1/4-20

5/16-183/8-16

Z1/4-20 x .38 DP5/16-18 x .50 DP3/8-16 x .63 DP

AA10-24 x .38 DP1/4-20 x .38 DP5/16-18 x .50 DP

BB1/81/81/4

GG**.375.376.438

HH**.531.687.906

DD**1.8752.3753.125

EE**1.5621.7502.188

B2 + (2 x TRAVEL)AB2 + (2 x TRAVEL)

4X BB NPT

TT0x (TANDEM) SERIES DETAILM

KNJ

HL

.062 4X AA THREAD EACHTHIS SIDE & OPPOSITE SIDE

EE** ±.0005

HH** ±.002

DBOTHENDS

Z THREAD - 2X EACHTHIS SIDE & OPPOSITE SIDE

C

S C

OPTIONAL: 2X CC ± .0005 DIAMETER FOR DOWEL PINFROM OPPOSITE SIDE

CLEARANCE DIAMETER FROM THIS SIDE

4X Y THREAD THRUWITH C'BOREFROM THIS SIDEFOR Q SHCSTx03 .375 DP, Tx04 .625 DP,Tx06 .750 DP

C/2 **RO/2

O

PRETRACTED AB* + TRAVEL

A B* + TRAVEL

U + TRAVEL

V SQ

2X BB NPT

W

2X X SHAFT DIA

Tx03Tx04Tx06

.2509

.3134

.3759

.2520

.3145

.3770

SLIDESERIES

OPTION J2/R2NORMAL FIT

OPTION J1/R1CLOSE FIT

MTG. HOLES: CENTERED ON CENTERLINE OF UNITDOWEL PIN HOLES: ARE OPTIONAL

OPTIONAL CC DOWEL PIN HOLE

6X Y THREAD THRUFROM THIS SIDE C'BOREDFROM OPPOSITE SIDEFOR Q SHCSTx03 .160 DP,Tx04 .187 DP,Tx06 .250 DP

SDD** ± .0005EF

GG** ± .002

G

OPTIONAL:2X CC ± .0005 DIAMETERFOR DOWEL PINCLEARANCE DIAMETERFROM OPPOSITE SIDE

AB36.5627.31211.125

B34.3124.3127.312

Tx03Tx04Tx06

SLIDEMODEL

BORESIZE3/4"

1-1/8"1-3/8"

LETTER DIMENSION

B3 + (CYL 1 TRVL + CYL 2 TRVL)AB3 + (CYL 1 TRVL + CYL 2 TRVL)

3X BB NPT

3 POSITION DETAIL

CYL. 1 CYL. 2

.265(Tx06 Only)

.265(Tx06 Only)

.265(Tx06Only)

* ADD 1/4" FOR EACH SHOCK PAD ADD 1/2" FOR EACH CUSHION ON Tx03 & Tx04 ONLY

**OPTIONAL DOWEL PIN HOLES

Tx03Tx04Tx06

SLIDEMODEL

BORESIZE3/4"

1-1/8"1-3/8"

LETTER DIMENSION


34

ww

w.phdinc.com


CLASSIC06

TS

SIZE

08 - 1" Shafts with 2-1/2" Bore Cylinder

TO ORDER SPECIFY:Model, Size, Design No., Slide Travel,Tool Plate Extension, and Options.

08 2 x 2 x 1 - - M-V

DESIGN NO.

OPTIONS- Travel adjustment on extension and retraction- Close fit dowel pin holes in the tool plate- Normal fit dowel pin holes in the tool plate- Travel adjustment on retraction- Travel adjustment on extension- Corrosion resistant Guide Shafts- Close fit dowel pin holes in the Slide body- Normal fit dowel pin holes in the Slide body

MODEL

TS - Slide - 150 psi Air Max.TOOL PLATE EXTENSION

Additional distance between tool plate andbearing block in 1" increments. Leaveblank if no additional extension is required.

CYLINDER OPTIONS

NOTES:1) Cylinder is NFPA 2-1/2" bore MR1 mount.2) -B and -D options are not available together.3) Specify -Y option to order a distributor supplied cylinder. Cylinder is to be an

NFPA 2-1/2" bore “MR1” (Head Male Rabbet mtg.) or “MX3” (Heads Tierodextended mtg.). Dimensions with 5/8" rod, style “SF” Rod End with7/16-20 female thread x .750 deep with 3-3/4" rod extension.(NFPA “MX3” mtg. dim. “W” equals 3-3/4" or dim. “C” and “V” addedtogether equals 3-3/4") dim. taken from front face of the head to the end ofthe rod. If the cylinder has cushions, the adjustment needle must be on theside opposite the port.

4) Shock absorbers cannot be used on units with cushions (-D option)

A

SLIDE TRAVEL(1" increments)

Available in 1" to 24"

BDEMH1VY

- Shock pads on both ends- Cushions on both ends- Magnetic Piston (Hall Effect)- Magnetic Piston (Reed)- Slide with no cylinder supplied- Fluoro-Elastomer Seals- Distributor Supplied cylinder

AJ1J2LNQR1R2

For all Compact Switches, use bracket number 50256.

BRACKET NUMBERDESCRIPTIONPROXIMITY SWITCH MOUNTING BRACKETS

17755-0117755-0217755-03

SHOCK ABSORBERS AND KITS

EXTEND KITRETRACT KITSHOCK ONLY

WITH SHOCKDESCRIPTION195781957911036-002

1958119580

—

WITHOUT SHOCK

NOTE: See dimension pages for locations andtolerances of dowel pin holes.

LIMIT SWITCH WITHOUT CONDUIT (AN12 TYPE)LIMIT SWITCH WITH CONDUIT (AN12 TYPE)LIMIT SWITCH WITHOUT CONDUIT (AB12 TYPE)

ORDERING DATA: SERIES TS08 SLIDES


35

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES TS08 SLIDES

OPTIONAL:2X CC ± .0005 DIAFOR DOWEL PIN x .50 DP

8X 3/8-16 THREAD THRU WITH .315 MINØ THRU THREADS X .625 DP C’BOREDFROM OPPOSITE SIDE FOR 1/4 SHCSW/NARROW WASHER OR 5/16 SHCS.

3.000**

1.5935 ± .002 TODOWEL PIN HOLE

2.500 4X THRU DIA & FOR 3/8 x .625 DP SHCSC'BORED FROM THIS SIDE AND OPPOSITE SIDE


TS082MODEL



.3759 .3770

6.0008.500 8.250

OPTIONAL TRAVEL ADJUSTMENTON RETRACTION

3/8-16 THREAD x 1.000 DP4X EACH FROM THIS SIDE

OPPOSITE SIDE & BOTH ENDS16X TOTAL

1.875.375

1.125

2.125 RETRACTED8.625* + TRAVEL

1.800 1.500

1.400* + TRAVEL

2.550 OPTIONAL:CC ± .0005 DIA FOR DOWEL PINx .500 DP 2X EACH FROM THIS SIDE& OPPOSITE SIDE

4.000**

1.0935 ± .002TO DOWEL PIN HOLE

3.000SQ 6.187

2X 1/4 NPT

2X 1.000 DIA

4.000

4.000

3/8-16 THREAD x 1.25 DP4X EACH THIS SIDE OPPOSITE SIDE,TOP SIDE & BOTTOM SIDE16X TOTAL

3.5003.000

2.500

.250

.550

1.375 OPTIONAL STROKEADJUST ON EXTEND

2.000 DIA

5.100

*ADD 1/4" FOR EACH SHOCK PAD**OPTIONAL DOWEL PIN HOLES TOLERANCE IS ± .0005MTG. HOLES: CENTERED ON CENTERLINE OF UNITCYLINDER: 2-1/2" BORE


36


CLASSIC06

Series R Slides


Series SD/SE & SK/SL Slides.See PHD’s main catalog.

R

37

ww

w.phdinc.com


CLASSIC06

RS

SIZE03 - 3/8" Shaft04 - 1/2" Shaft06 - 3/4" Shaft08 - 1" Shaft10 - 1-1/4" Shaft12 - 1-1/2" Shaft

TO ORDER SPECIFY:Three Position Unit, Model, Size, Design No.,Slide Travel, Mid-Position Travel, Tool PlateExtension and Options.

06 2 x 2 x 1 - E-VDESIGN NO.MODEL

RS - 150 psi Air Max.RT - Air/Oil Tandem 150 psi Air Max.RH - 150 psi Hyd. Max.(RT and RH not available onsizes 10 and 12.)

TOOL PLATE EXTENSIONAdditional distance between tool plate andbearing block in 1" increments. Leaveblank if no additional extension is required.

SLIDE TRAVEL03 - 1/2" to 2-1/2" in 1/2" increments04 - 1" to 8" in 1" increments06 - 1" to 12" in 1" increments08 - 1" to 20" in 1" increments10 - 1" to 24" in 1" increments12 - 2" to 24" in 1" incrementsConsult factory or distributor for longertravel lengths.Total slide travel from retract position 1to extend position 3.

3 - For Rx03 Slides2 - For all other R Slides

OPTIONS

NOTES:1) Cylinders for sizes 03-08 are Series AV, HV, TD, or A3V, H3V. Cylinders for RS10 and 12 are NFPA MF1 Cylinder.2) Port Controls are standard on all models except RS10 and 12.3) -B and -D cannot be ordered together. -B not available on RH models.4) Shock absorbers cannot be used on units with cushions (-D option).

See Switches and Sensors section inPHD’s main catalog for completeordering information.

SLIDE SIZE BRACKET SIZE NO.030406081012

17500 TYPE PROXIMITY SWITCHMOUNTING BRACKETS

-31-33-34-34-51-51 DESCRIPTION

One kit is required for two switches. Switches are customer supplied12 mm or 18 mm Proximity Switches.

03KIT WITHOUT SWITCH

PROXIMITY SWITCH MOUNTING KITS 12 mm or 18 mm

11034 11035 11035 1115304 & 06 08 10 & 12

DESCRIPTION

Kits must be ordered separately. See Shock and Proximity Switch dimensional information.

04EXTEND KIT WITHOUT SHOCKRETRACT KIT WITHOUT SHOCKSHOCK ONLY

SHOCKS AND KITS

1103712203

11036-001

NOTE: The chart below shows the shortest travel allowedfor shocks to be mounted on the same side of unit.

DESCRIPTIONRS04RS06RS08RS10

5.00"

4.00"

SHORTEST ALLOWABLE TRAVEL

NOTE: See Dimension pages for locations and tolerances ofdowel pin holes.

BDEH1I

J1J2MQR1R2VXY

- Shock Pads on both ends (Series RS only)- Cushions on both ends (Series RS only)- Magnetic Piston (Hall Effect)- Slide with no cylinder supplied- Reservoir assembly plumbed to unit (includes -X Crossover Tube)filled and bled of air- Close fit dowel pin holes in the tool plate- Normal fit dowel pin holes in the tool plate- Magnetic Piston (Reed)- Corrosion resistant guide shafts- Close fit dowel pin holes in the slide body- Normal fit dowel pin holes in the slide body- Fluoro-Elastomer Seals- Crossover tube unit filled with oil and bled of air (RT only)- No cylinder supplied, customer to supply cylinder (only 08, 10, and 12). {NFPA MF1 mounting (08=1-1/2", 10=2", 12=2-1/2" bores) 5/8" rod with 7/16-20 thread}THREE POSITION UNIT

(specify only if needed)sizes 03 to 08 only

3 x 1


Travel from retract position 1to mid-position 2

1116311163

11036-002

121115911160

11036-005

101115511156

11036-005

081103812204

11036-001

06

ORDERING DATA: SERIES R SLIDES3 POSITION DETAIL

RETRACT



3 1

2


38

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: Rx03 SLIDES

RT03 ( TANDEM ) SERIES DETAIL

OPTIONAL CC DOWEL PIN HOLEOPTION J1/R1

CLOSE FIT.1884


.1895

*ADD 1/4" FOR EACH SHOCK PAD ADD 1/2" FOR EACH CUSHION**OPTIONAL DOWEL PIN HOLES TOLERANCE IS ±.0005***DIMENSIONS ARE NOT AFFECTED BY TRAVEL. MTG HOLES: CENTERED ON CENTERLINE OF UNIT CYLINDER: 3/4" BORE READY STOP NUT: THREAD SIZE IS 3/8-24

SLIDEMODELRx03

3 POSITION DETAIL

5.250* + (2 x TRAVEL)

4X 1/8 NPT

1.250.125

1.000

.500

3.2502.500 **

1.250

1/4-20 THREAD x .38 DP4X EACH FROM THIS

SIDE & OPPOSITE SIDE

2X 1/4-20 THREAD THRUOPTIONAL:2X CC ±.0005 DIAMETER FOR DOWEL PINCLEARANCE DIAMETER FROM OPPOSITE SIDE

1.875 ** 1.250

.250± .0015

2X 1/4-20 THREADTHRU x .200 DPC'BORED FROM OPPOSITESIDE FOR # 10 SHCS

1.500 RETRACTED

1.250

1.188

2.3754.875

.750

.375

7.500***

2.625***2.500* + TRAVEL

2X 1/8 NPT

1.000SQ 2.500

2X .375 SHAFT DIA

OPTIONAL:CC ±.0005 x .25 DP DIAMETER FOR DOWEL PIN2X EACH FROM THIS SIDE AND OPPOSITE SIDE

READY STOP NUT READY STOP NUT

4.312* + ( CYL1 TRVL + CYL 2 TRVL)

3X 1/8 NPT


39

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: Rx04 &

Rx06 SLIDES

OPTIONAL CC DOWEL PIN HOLESLIDE

MODELRx04Rx06


.1895

.2520


.1884

.2509

MTG HOLES: CENTERED ON CENTERLINE OF UNITREADY STOP NUT: THREAD SIZE IS 1/2-20

L.062

H

H/2

2X X SHAFT DIAC + TRAVEL

R + TRAVELOPTIONAL:S SLOT x JS ±.001 WIDE FOR DOWEL PIN2X EACH FROM THIS SIDEAND OPPOSITE SIDE

V SQW

2X BB NPT

AATOLERANCE TOSLOT & DOWELHOLE IS ±.0015

B* + TRAVEL

U + TRAVEL

AB* + (2 x TRAVEL)

A + TRAVEL

N

.625K

P RETRACTED

O

0/2

F E M

Z THREAD - 4X EACHTHIS SIDE & OPPOSITE SIDE

OPTIONAL: CC ±.0005 DIAMETER FOR DOWEL PIN2X EACH FROM THIS SIDE AND OPPOSITE SIDE

4X .281 THRU DIA MTG HOLE

OPTIONAL:2X CC ±.0005 DIAMETER FORDOWEL PIN CLEARANCE DIAMETERFROM OPPOSITE SIDE

E D **M

2X Y THREAD THRU FROMTHIS SIDE C'BORED FROMOPPOSITE SIDE FOR Q SHCS

2X Y THREAD THRUK

T **

GTOLERANCE TOSLOT & DOWELHOLE IS ±.0015

READY STOP NUTS

LETTER DIMENSIONSLIDEMODELRx04Rx06

BORESIZE1-1/81-3/8

A4.2504.625

AB*6.5008.685

AB29.250

13.187

B*2.2504.060

B25.0008.562

C3.0003.250

D**2.1252.750

E4.0005.000

F4.5005.750

G.437.500

H1.3751.750

J.1884.2509

T**4.0005.250

S.38 LG x .25 DP.44 LG x .38 DP

JS.1895.2520

K1.2501.625

L1.5001.875

M1.5002.000

N.375.437

O1.0001.125

P1.8752.000

Q1/4 x .260 DP

5/16 x .333 DP

R3.7504.125

U1.2501.625

V1.5001.875

W2.7503.500

X.500.750

Y5/16-183/8-16

Z5/16-18 x .50 DP3/8-16 x .63 DP

AA.625.875

BB1/81/4

* ADD 1/4" FOR EACH SHOCK PAD. ADD 1/4" TO ALL RH04 SERIES UNITSADD 1/2" FOR EACH CUSHION ON Rx04 SERIES UNITS

** OPTIONAL DOWEL PIN HOLES AND SLOTS TOLERANCE DESIGNATED BY LETTERDIMENSION “D” & “T” IS ±.0005

3X BB NPT

AB3* + (2 x CYL 1 TRVL + CYL 2 TRVL)

B3* + (CYL 1 TRVL + CYL 2 TRVL)

3 POSITION DETAIL

SLIDEMODELRx04Rx06

BORESIZE1-1/81-3/8

AB3*8.562

12.200

LETTER DIMENSIONB3*

4.3127.577

4X BB NPT

AB2 + (3 x TRAVEL)

B2 + (2 x TRAVEL)

RTOx ( TANDEM ) SERIES DETAIL

T**


40

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: Rx08 &

Rx10 SLIDES

4X 1/4 NPT

AB2 + (3 x TRAVEL)B2 + (2 x TRAVEL)

RTO8 ( TANDEM ) SERIES DETAIL

H

H/2

L.062


MTG HOLES: CENTERED ON CENTERLINE OF UNITREADY STOP NUT: THREAD SIZE IS 7/8-14


.3759

.3759


.3770

.3770

SLIDESERIESRx08RS10 * ADD 1/4" FOR EACH SHOCK PAD

** OPTIONAL DOWEL PIN HOLES AND SLOTS TOLERANCE DESIGNATED BYLETTER DIMENSION “D” & “T” IS ±.0005

LETTER DIMENSION

3X 1/4 NPT

AB3* + (2 x CYL 1 TRVL + CYL 2 TRVL)B3* + (CYL 1 TRVL + CYL 2 TRVL)

3 POSITION DETAIL (Rx08 only)

2X X SHAFT DIA

V SQ W

AATOLERANCE TO SLOT& DOWEL HOLEIS ±.0015

B* + TRAVELAB* + (2 x TRAVEL)

A + TRAVEL

K

P RETRACTED

O

0/2

F E M

OPTIONAL:2X CC ±.0005 DIAMETER FORDOWEL PIN CLEARANCEDIAMETER FROMOPPOSITE SIDE

E D **

4X 3/8-16 THREAD THRUC'BORED FROM OPPOSITE SIDE FOR5/16 SHCS.333 C'BORE DP

G

K

T **

2X 1/4 NPT

3/8-16 THREAD x .75 DP2X EACH THIS SIDEAND OPPOSITE SIDE

3/8-16 THREAD x .75 DP4X EACH THIS SIDE

& OPPOSITE SIDE

NR

1.375 + TRAVEL

4X .406 THRUDIA MTG HOLE

2X .344 DIAMETER THRUOPTIONAL: 2X CC ±.0005DIAMETER x .43 DP FOR DOWEL PINEACH FROM THIS SIDE AND OPPOSITE SIDE

J + TRAVEL3.625 + TRAVEL

2X .344 DIAMETER THRUOPTIONAL:2X .3770 ±.001 WIDE x .43 DP x .56 LGSLOT FOR 3/8 DOWEL PINEACH FROM THIS SIDEAND OPPOSITE SIDE

READYSTOPNUT

SLIDEMODEL

Rx08RS10

CYL.BORE1-3/8

2

A5.1255.625

AA1.0621.250

AB*9.1889.625

AB213.688

—

B*4.0624.000

B28.625

—

D**3.0004.000

E6.6258.500

F7.3759.250

G1.2501.500

H1.8752.375

J2.3752.125

K2.2502.625

L2.0002.500

M2.0003.000

N.625.750

O1.5001.750

P2.5002.750

R.7501.000

T**6.6258.500

V1.8752.500

W4.5006.000

X1.0001.250

AB3*12.703

—

B3*7.577

—


41

ww

w.phdinc.com


CLASSIC06

* ADD 1/4" FOR EACH SHOCK PAD** OPTIONAL DOWEL PIN HOLES AND SLOTS TOLERANCE IS ±.0005MTG HOLES: CENTERED ON CENTERLINE OF UNITCYLINDER: 2-1/2" BOREREADY STOP NUT: THREAD SIZE IS 7/8-14

OPTIONAL CC DOWEL PIN HOLESLIDE

MODELRS12


.3759


.3770

2.000

9.7504.500 **

OPTIONAL:2X CC ±.0005 DIAMETER FORDOWEL PIN CLEARANCE DIAMETERFROM OPPOSITE SIDE

6X 3/8-16 THREAD x 1.000 DPTHRU DIA & C'BORE FROMOPPOSITE SIDE FOR 5/16 SHCSC'BORE .333 DP

1.500TOLERANCE TO SLOT& DOWEL HOLE IS ±.0015

2X 1/4 NPT

3.000SQ

1.125+ TRAVEL

4.125* + TRAVEL

3.000

5.625 + TRAVEL

3.000

1.0001.000

9.750* + (2 x TRAVEL)

1.125

2.250

3.250 RETRACTED

3.250

9.750

10.500

4X 3/8-16 THREAD x .75 DP EACHTHIS SIDE & OPPOSITE SIDE

2X .344 DIA THRUOPTIONAL:

CC ±.0005 x .43 DP2X DIAMETER FOR DOWEL

PIN EACH FROM THISSIDE AND OPPOSITE SIDE

4X .406 THRU DIA MTG HOLE

3.625 + TRAVEL1.625 + TRAVEL

2X .344 DIA THRUOPTIONAL:2X .3770 ±.001 WIDE x .43 DP x .56 LG SLOT FOR DOWEL PINEACH FROM THIS SIDE AND OPPOSITE SIDE

2X 1.500 SHAFT DIA

6.750

9.750 **

3.000.062

2.875

1.438

READY STOP NUT

DIMENSIONS: Rx12 SLIDES


42


CLASSIC06

TOP VIEWEXTEND KIT THIS ENDRETRACT KIT THIS END

D SHOCKTRAVEL

C THREAD

A B

SHOCKABSORBER11036-00111036-00111036-00511036-00511036-002

CTHD.1-121-121-121-12

11/4-12

BDIM..775.745.751.750

1.312

ADIM.

1.1901.1901.1851.1901.812

SLIDEMODELRx04Rx06Rx08Rx10Rx12

DTRAVEL

SHOCK ABSORBERMOUNTING KITS

EXTEND RETRACT1.0001.0001.0001.0002.000

1103711038111551115911163

1220312204111561116011163

NOTES:1) SHOCK ABSORBERS ARE NOT INCLUDED WITH EXTEND AND

RETRACT MOUNTING KITS2) MOUNTING KITS MAY BE MOUNTED ON EITHER SIDE OF UNIT3) EACH KIT CONTAINS ALL HARDWARE NECESSARY TO MOUNT

KIT TO SLIDE

C THREAD D SHOCKTRAVEL

SIDE VIEW

SERIES RS 12

A B DESCRIPTIONRx04Rx06Rx08Rx10

NOTE: The chart below shows the shortest travel allowed for shocks tobe mounted on the same side of unit.

SHORTEST ALLOWABLE TRAVEL

5.00

4.00

SLIDEMODEL

MOUNTING KIT

110341103511035110351115311153

Rx03Rx04Rx06Rx08Rx10Rx12

NOTES:1) PROXIMITY SWITCHES ARE NOT

PROVIDED BY THE MANUFACTURER2) EACH KIT CONTAINS ALL HARDWARE

NECESSARY TO MOUNT KIT TO SLIDE

1.180

THRU HOLES FOR18 mm OR 12 mmPROXIMITY SWITCHES

PROXIMITY SWITCH BRACKET KIT

1.060

SERIES Rx04,06,08, & 10

SHOCK ABSORBER KITS

KITS: SERIES R SLIDES


43


CLAS

SIC0

6

Series C Slides

C


Series SM and SFP.See PHD’s main catalog.

44

ww

w.phdinc.com


CLASSIC06

CB 04 1 xU

TO ORDER SPECIFY:Model, Shaft Designation, Size, Design No., and Slide Travel.

24

DESIGN NO.

MODELCA - Magnetic Slide with 110 psi to uncoupleCB - Magnetic Slide with 150 psi to uncouple

SLIDE TRAVEL(in 1" increments)

03 - 1" to 16"04 - 1" to 24"06 - 1" to 36"

SHAFT DESIGNATION

SIZE

03 - 3/8" Shaft04 - 1/2" Shaft06 - 3/4" Shaft

U - Plain Shaft

12 mm PROXIMITY SWITCH AND NUT (2 REQUIRED)15561-001 DC 24 Volts - Sink - (NPN)15561-002 DC 24 Volts - Source - (PNP)15561-003 AC 117 VAC

* Kit includes nylon shock button

03SHOCK & LOCK-NUT

SHOCK KITS

11036-012 16913-002 16913-00304 * 06 *DESCRIPTION

- Q

OPTIONQ - Corrosion resistant guide shafts

ORDERING DATA: SERIES C SLIDES

45

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES C M

AGNETICALLY COUPLED SLIDES

MTG. HOLES: CENTERED ON DESIGNATED CENTERLINES OF UNITCxx031: 10-32 BARB FITTINGS ARE SUPPLIED WITH UNIT

LETTER DIMENSION

CL

CL

CL

BB PORTBOTHENDS

CC THREAD THRU FOROPTIONAL SHOCK ABSORBERSBOTH ENDS

F

.50 DIA THRU FOR OPTIONAL12 mm PROXIMITY SWITCH

BOTH ENDS

AA

S

H

JL

W

O

KBOTH ENDS

2X X SHAFT DIA

Y THREAD ON OPPOSITE SIDETHRU DIA AND C'BORE FOR QSHCS 2X EACH END

4X THRU DIA AND C'BORE FROMOPPOSITE SIDE FOR U SHCS

TBOTHENDS

VBOTHENDS

G TO SHAFT

N

C + TRAVEL

E

P AT END OF TRAVEL

M

B

A + TRAVEL

Z

4X R THREAD

MD

.905MAX

TRAVEL ADJUSTMENT+ .030 / - .500

BOTH ENDS

.157 MINBOTH ENDS

Cxx031

Cxx041

Cxx061

SLIDEMODEL

3/8

3/4

1-1/8

BORESIZE A

4.750

6.375

7.875

B

3.375

4.750

6.000

C

4.250

5.750

7.125

D

3.625

5.000

6.250

E

3.125

4.500

5.750

F

2.750

4.000

5.250

G

.500

.688

.875

H

1.688

2.250

3.000

J

.062

.125

.125

K

.500

.625

.750

L

1.656

2.250

3.000

M

1.750

2.000

2.250

N

2.875

4.125

5.250

O

.250

.312

.375

P

.688

.812

.938

R

10-24 x .37 DP

1/4-20 x .50 DP

5/16-18 x .75 DP

S

.375

.500

.625

T

1.000

1.500

2.000

V

1.375

1.938

2.625

W

1.875

2.750

3.500

X

.375

.500

.750

1/4-20 x .50 DP

5/16-18 x .75 DP

3/8-16 x 1.00 DP

Y Z

2.688

3.938

5.188

AA

.594

.875

1.000

BB

10-32

1/8

1/8

CC

1/2-20

3/4-16

1-12

Q

#10 x .210 DP

1/4 x .275 DP

5/16 x .338 DP

U

#8 x .199 DP

#10 x .215 DP

1/4 x .275 DP


46


CLASSIC06

We recommend Series SG Slides.For more information, see PHD’s main catalog.

BENEFITS■ Series SG Slides are available in six sizes with travels to

36 inches or 900 mm to cover a wide range of saddle slideapplications.

■ The slide saddle contains four bushings which ride on twohardened, precision ground shafts providing smooth, preciselinear motion.

■ Series SG Slides can be equipped with either linear ballbushings or TC fluoropolymer composite bushings to provideoptimum performance with minimum slide deflection for alltypes of applications.

■ Oversize guide shafts are available on units with TC bushingsfor maximum rigidity and minimum deflection.

■ Both linear ball bushings and TC bushings have internallubrication for maximum life.

■ Linear ball bushings provide the lowest friction for lowbreakaway and come standard with shaft seals for protectionfrom external contamination.

■ The anodized aluminum alloy saddle is supplied withthreaded and counterbored holes for easy mounting of toolingand fixturing.

■ Series SG Slides are available with oversize PHD Cylinders formaximum force and long cylinder life.

■ Series SG Slides are available in both metric and imperialversions allowing flexibility in design for a world market.

■ Metric units can be specified as “ISO cylinder ready” providing aslide with all hardware to mount standard VDMA/6432 ISOcylinders.

■ All bushings, seals, shafts, and cylinder components are easilyreplaced for extended unit life.

■ Options include shock absorbers, cushions, shock pads,proximity switches, and corrosion-resistant shafts, allowing theslide to be specified for a wide variety of applicationrequirements.

■ Built-in standard travel adjustments provide easy precisepositioning of the end-of-travel positions.

47


CLAS

SIC0

6


Series SG or SFP Slides.See PHD’s main catalog.

Series B Slides

B

48

ww

w.phdinc.com


CLASSIC06

BS

SIZE03 - 3/8" Dia. Shaft04 - 1/2" Dia.Shaft06 - 3/4" Dia. Shaft08 - 1" Dia. Shaft10 - 1-1/4" Dia. Shaft12 - 1-1/2" Dia. Shaft

TO ORDER SPECIFY:Three Position Unit, Model, Size, Design No.,Slide Travel, Mid-Position Travel, and Options.

08 1 x 12 - D-E

DESIGN NO.MODELBS - Slide - 150 psi Air max.BT - Tandem - Air/oil cylinder 150 psi Air max. (not available on size 10 or 12)BH - Slide - 150 psi Hyd. max. (not available on size 10 or 12)

NOTES:1) Port Controls are standard on sizes 03 through 08.2) Shock pads are available on Series BS only.3) Options -B and -D are not available together.4) One shock and lock-nut are required for each direction. One Shock Stop. block kit is required for both directions. (For sizes 10 and 12, one shock and shock block kit is required for each direction.)5) -Y cylinder is to be: 08 - NFPA 1-1/2" bore with MF1 mtg., 5/8" rod, style SF rod end with 7/16-20 female thread x .750 DP 10 - NFPA 2" bore with MF1 mtg., 5/8" rod, style SF rod end with 7/16-20 female thread x .750 DP 12 - NFPA 2-1/2" bore with MF1 mtg., 5/8" rod, style SF rod end with 7/16-20 female thread x .750 DP6) Cylinder support kit is recommended for travels longer than 36".7) Metric versions available. Contact PHD for specifications and literature.

SLIDE TRAVEL(in 1" increments)

03 - 1" to 12"04 - 1" to 16"06 - 1" to 24"08 - 1" to 36"10 - 1" to 48"12 - 1" to 60"

Total slide travel fromretract position 1 toextend position 3.

See Switches and Sensors section inPHD’s main catalog for completeordering information.

SLIDE SIZE BRACKET SIZE NO.030406081012


-31-33-34-34-51-51

CYLINDER OPTIONSB

DEH1I

MQVX

Y

- Shock Pads on both ends (not available on BT or BH Models)- Cushions on both ends- Magnetic Piston (Hall Effect)- Slide with no cylinder supplied- Reservoir assembly plumbed to unit filled with oil and bled of air (includes -X Crossover Tube)(BT models only)- Magnetic Piston (Reed)- Corrosion resistant guide shafts- Fluoro-Elastomer Seals- Crossover tube, unit filled with oil and bled of air (Series BT only) (not available on size 10 or 12)- No cylinder supplied, distributor to supply cylinder to PHD (Series BS only) (not available on size 03-06)

See Kit section for dimensional information and Part No.

03SHOCK & LOCK-NUTSHOCK STOP BLOCK KITBOTH SHOCKS, NUTS, & KIT

SHOCK KITS

11036-0031378513789

11036-0051235412360

11036-0051235612362

11036-0051235612362

04 06 08DESCRIPTION

10SHOCK & LOCK-NUTSHOCK STOP BLOCK KITSHOCK & SHOCK BLOCK KITCYLINDER SUPPORT KIT

11036-002137991380013823

11036-010138011380213824

12DESCRIPTION


sizes 03-08 only

3 x 1

MID-POSITION TRAVELSpecify for 3 position unit.

Travel from retractposition 1 to mid-position 2.

ORDERING DATA: SERIES B SLIDES3 POSITION DETAIL

(Bx03 to Bx08)

RETRACT



3 1

2


49

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES Bx03, Bx04, Bx06 &

Bx08 SLIDES

*ADD 1/4" FOR EACH SHOCK PAD, ADD 1/2" FOR EACH CUSHION ON Bx03 & Bx04 SERIES ONLY

Bx03Bx04Bx06Bx08

SLIDESERIES

CYL.BORE3/4"

1-1/8"1-3/8"1-3/8"

A6.1257.2509.500

11.250

FF.375.500.750.875

EE1.2801.6862.3432.686

DD.198.260.322.385

CC3/4-161-121-121-12

BB1/81/81/41/4

AA.687

1.0001.0001.000

Y10-24 x .50 DP1/4-20 x .62 DP

5/16-18 x .75 DP3/8-16 x .75 DP

X.375.500.750

1.000

W2.7503.6255.0005.750

U**3/161/45/163/8

V1.0001.5001.8751.875

T3.6254.7506.2507.500

S***2.0002.6253.5004.000

R.250.375.500.375

P.9381.0001.2501.250

O.438.500.625.750

N***3.0004.0005.5007.000

M1.5002.0003.0003.500

L1.1251.7502.1252.125

K.8751.0001.2501.500

J.062.062.125.062

H1.1881.8122.1252.188

G.688.9381.1881.188

F5.0006.6258.2509.750

E2.0622.7503.5004.250

D4.0005.0006.7508.000

C5.2506.2508.2509.750

B25.2505.2508.8758.875

B*2.5002.5004.3754.375

GG1.3751.8122.5002.875

Q**1/4 x .3125/16 x .3383/8 x .4007/16 x .500

Z#6 x .500 DP

#10 x .190 DP1/4 x .270 DP5/16 x .313 DP

HG

J L

3 POSITION DETAIL BTOx ( TANDEM ) SERIES DETAIL

B2 + ( 2 x TRAVEL)

4X BB NPT

B34.5624.5627.6257.625

AA MAX1/2 TRAVEL ADJUSTMENT

D SQ

2X DIA FOR U DOWELPIN x R DP

WV SQ

O

KBOTH ENDS

2X BB NPT

1/2 TRAVELADJUSTMENT

2X X SHAFT DIA4X Y THREAD FROM THISSIDE C'BORED FROM OPPOSITESIDE FOR Z SHCS

GG ± .002

THRU DIA AND C'BORE FOR QSHCS 2X EACH END**

DIA FOR U DOWEL PIN FROMOPPOSITE SIDE CLEARANCE DIA FROM

THIS SIDE 2X EACH END

TBOTHENDS

S***BOTHENDS

2X M

FF ± .002

N***

C + TRAVEL

E

O

P WITH CYLINDER INEXTENDED POSITION

A + TRAVEL B* + TRAVEL


F

U ± .001 x DD DP SLOTFOR DOWEL PIN

BOTH ENDS**

EE ± .002

***DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PIN HOLES DESIGNATED BY LETTER DIMENSION “S” & “N” IS ±.001MTG. HOLES: CENTERED ON CENTERLINE OF CYLINDER

**DOWEL PIN HOLES ARE INTENDED FOR USE WITH THE DOWEL PIN SLOT ON THEOPPOSITE END. SLIDE LENGTH TOLERANCES DO NOT PERMIT THE USE OF THEDOWEL PIN HOLES IN EACH END FOR PRECISE LOCATION. TOLERANCE BETWEENCENTERLINE OF DOWEL SLOT AND CENTERLINE OF DOWEL HOLE IS ±.002

B3 + (TRVL CYL 1 + TRVL CYL 2)

3X BB NPT

.265(06 & 08 ONLY)

.265(06 & 08ONLY)

.265(06 & 08ONLY)

LETTER DIMENSION


50

ww

w.phdinc.com


CLASSIC06

DIMENSIONS: SERIES Bx10 &

Bx12 SLIDES

*ADD 1/4" FOR EACH SHOCK PAD

HG

.125 L

1.281 MAX1/2 TRAVEL ADJUSTMENT

D SQ

4X DIA FOR 3/8DOWEL PIN x .37 DP

WV SQ

OKBOTH ENDS

2X 1/4 NPT

1/2 TRAVELADJUSTMENT

2X X SHAFT DIA

1/2 -13 THREAD x 1.375 DPFROM THIS SIDE12X C'BORED FROMOPPOSITE SIDE FOR 3/8 SHCSC'BORE: BS10 .500 DP, BS12 .500 DP

GG ± .002

THRU DIA AND C'BORE FOR QSHCS 2X EACH END**

DIA FOR 3/8 DOWEL FROMOPPOSITE SIDE CLEARANCE DIA

FROM THIS SIDE 2X EACH END

TBOTHENDS

S***BOTHENDS

M

FF ± .002

N***

C ± .030 + TRAVEL

E

O

P WITH CYLINDER INEXTENDED POSITION

A + TRAVEL B* + TRAVEL


F

.3770 ± .001 x .385 DPSLOT FOR DOWEL PIN

BOTH ENDS**

EE ± .002

M

N***

HH ± .002TO DOWELPIN HOLE

AA

OPTIONAL CYLINDER SUPPORT BRACKETC'BORED THRU DIA FOR A 5/16

SHCS

.937.312

***DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PIN HOLES DESIGNATED BYLETTER DIMENSION “S” & “N” IS ±.001MTG. HOLES: CENTERED ON CENTERLINE OF CYLINDER

**DOWEL PIN HOLES ARE INTENDED FOR USE WITH THE DOWEL PIN SLOT ON THEOPPOSITE END. SLIDE LENGTH TOLERANCES DO NOT PERMIT THE USE OF THEDOWEL PIN HOLES IN EACH END FOR PRECISE LOCATION. TOLERANCE BETWEENCENTERLINE OF DOWEL SLOT AND CENTERLINE OF DOWEL HOLE IS ±.002

LETTER DIMENSION

BS10BS12

SLIDESERIES

CYL.BORE

2"2-1/2"

A13.87516.875

B*4.0004.125

C12.12514.625

D10.00012.000

E5.1256.125

F12.00014.750

G1.5001.750

H2.7503.250

K1.7502.250

L2.7503.250

M3.5005.000

N***9.00011.000

O.8751.125

P1.4371.687

S***4.5005.500

T9.00010.750

V2.5003.000

W6.5008.000

X1.2501.500

AA1.0001.250

CC1-1/4-121-3/4-12

EE3.0623.812

FF1.0001.250

GG3.2504.000

HH7.7509.500

Q**5/8 x .645 DP3/4 x .770 DP


51


CLAS

SIC0

6

D SHOCKTRAVEL

C THREAD

A MAX

SERIES BS 10 & 12

C THREAD

D SHOCKTRAVEL A MAX

SERIES Bx03,04,06, & 08 CTHD.

3/4-161-121-121-12

11/4-1213/4-12

ADIM.

1.2502.0901.840.965

3.3753.125

DTRAVEL

.5001.0001.0001.0002.0002.000

137891236012362123621380013802

COMPLETESHOCK

KITSHOCK

ABSORBER11036-00311036-00511036-00511036-00511036-00211036-010

137851235412356123561379913801

STOP BLOCKKIT

SLIDEMODELBx03Bx04Bx06Bx08BS10BS12

SHOCK ABSORBER KITSSHOCK KIT PARTS

1) A COMPLETE SHOCK KIT CONTAINS THE FOLLOWING:2 - SHOCK ABSORBERS2 - LOCK NUTS ( WHEN REQ'D )1 - STOP BLOCK KIT

2) BS 10 & BS 12 UNITS CONTAIN 1 OF EACH ITEM ANDWILL REQUIRE 1 KIT FOR EACH DIRECTION

NOTES:

SHOCK ABSORBER KITSSERIES B SLIDES

KITS: SERIES B SLIDES

SLIDEMODEL

LETTER DIMENSIONKIT N0THRU HOLES THREADED

BS10BS12

1379413798

14452-1-0014453-1-00

.750

THRU HOLE PLATE

2X THRU DIA FOR3/8 DOWEL PIN

8X THRU DIA & C'BOREFOR 1/2 SHCS

ADE

EA

A/2

NOTES:1) EACH KIT CONTAINS 1 MTG PLATE, 2 DOWEL PINS, & REQUIRED

MTG SCREWS2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE AND A

CLEARANCE FIT INTO SLIDE SADDLE

SADDLE MOUNTING PLATESERIES Bx10 - Bx12 SLIDES

.750

A

A/2

2X THRU DIA FOR3/8 DOWEL PIN

E

8X 3/8-16 THREAD THRU

ADE

THREADED HOLE PLATE

C

THRU HOLE PLATE

A4.0005.0006.7508.000

C.500.500.625.625

D3.0004.0005.5007.000

E1.5002.0003.0003.500

F3/16 1/45/16 3/8

G# 10 1/45/16 3/8

H 8-3210-241/4-205/16-18

SLIDEMODEL

LETTER DIMENSIONKIT N0THRU HOLES THREADED

Bx03Bx04Bx06Bx08

13790123481234912350

14451-1-0012558-1-0012568-1-0012581-1-00

2X THRU HOLEFOR F DOWEL PIN

4X THRU DIA & C'BOREFOR G SHCS

E

AD

A

A/2

SADDLE MOUNTING PLATESERIES Bx03 - Bx08 SLIDES

NOTES:1) EACH KIT CONTAINS 1 MTG PLATE, 2 DOWEL PINS, &

REQUIRED MTG SCREWS2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE AND A

CLEARANCE FIT INTO SLIDE SADDLE

CD

E

A

A

A/2

2X THRU HOLEFOR F DOWEL PIN

4X H THREAD THRU

THREADED HOLE PLATE

A10.00012.000

E3.5005.000

D 9.00011.000

52


CLASSIC06

Series M Slides

M


Series SM Slides.See PHD’s main catalog.

53

ww

w.phdinc.com


CLASSIC06

MS

SIZE02 - 1/4" Dia. Shafts

(MS Model only)03 - 5/16" Dia. Shafts04 - 1/2" Dia. Shafts06 - 3/4" Dia. Shafts

TO ORDER SPECIFY:Model, Size, Design No., Travel,and Options.

04 2 x 2 - E-V

DESIGN NO.MODELMS - Air Slide - 150 psi Air max.MT - Air powered, hyd. controlled Slide - 150 psi Air max.

OPTIONS

NOTES:1) Travel adjustments are standard on all Series MS and MT Slides.

02 - 3/4" of adjustment on each end03-06 - 1" of adjustment on each end

2) 02 size is available in Series MS only.3) For PHD Proximity Switches, see Switches and Sensors section

of PHD’s main catalog. Switches and brackets must beordered separately.

One kit is required for each switch.See next page for dimensional information.

PART NO. INDIVIDUAL SWITCH BRACKET13591 1750 Switch Mx03 thru Mx0611796 1590 Switch Mx03 thru Mx06

SWITCH BRACKET KIT

CE

F

I

M

V

- Ports on rod ends (Series MS only)- Magnetic Piston (Hall Effect) (not available on size 02)- Unit filled with oil and bled of air (MT Series only)- Reservoir assembly plumbed to unit filled and bled of air- Magnetic Piston (Reed) (not available on size 02)- Fluoro-Elastomer Seals

TRAVELSIZE AVAILABLE LENGTHS 02 - 1-1/2" or 3" 03 - 2" or 4" 04 - 2" or 4" 06 - 4" or 6"

ORDERING DATA: SERIES M SLIDES

54

ww

w.phdinc.com


CLASSIC06

MTG. HOLES: CENTERED ON CENTERLINE OF UNIT10-32 PORTS: BARB FITTINGS ARE SUPPLIED WITH UNIT**DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PINS DESIGNATED

BY LETTER DIMENSION "S" & "N" IS ±.001

CC

.630

.640

.740

.920

BB

10-32

1/8

1/8

1/8

Z

8-32 x .28 DP

10-24 x .33 DP

1/4-20 x .40 DP

5/16-18 x .50 DP

Y

.250

.354

.429

.446

X

.250

.312

.500

.750

W

.750

1.000

1.375

1.875

V

.600

.880

1.160

1.250

U

1/8 x .20 DP

3/16 x .25 DP

1/4 x .30 DP

5/16 x .37 DP

T

1.620

2.062

2.750

3.750

S**

.750

1.000

1.375

1.875

R

1/8 x .18 DP

3/16 x .20 DP

1/4 x .40 DP

5/16 x .56 DP

P

.210

.338

.273

1.023

O

.165

.225

.290

.340

N**

2.435

3.250

3.500

5.500

M

1.562

2.000

2.688

3.750

L

.820

1.130

1.450

1.700

K

.330

.450

.580

.680

J

.088

.075

.070

.070

H

.800

1.155

1.460

1.700

G

.450

.630

.730

.920

F

2.120

2.620

3.420

4.500

E

1.140

1.500

2.000

2.750

D

1.960

2.460

3.250

4.340

C

2.060

2.616

2.996

3.504

B

1.560

2.000

2.250

2.650

A

2.390

3.066

3.576

4.184

BORESIZE

1/2

3/4

1

1-3/8

MS02

MS03

MS04

MS06

LETTER DIMENSIONFF

.1260 x .12 DP

.1890 x .19 DP

.2510 x .25 DP

.3135 x .31 DP

EE

3/4"

1"

1"

1"

SLIDEMODEL ZB

8-32 x .25 DP

10-24 x .28 DP

1/4-20 x .38 DP

5/16-18 x .50 DP

AA

10-32

10-32

1/8

1/8

Q

#8 x .190 DP

#10 x .225 DP

1/4 x .360 DP

5/16 x .400 DP

HH.087

.101

.132

.166

SLIDEMODELMS02

MS03

MS04

MS06

GG1/4-28

5/16-24

3/8-24

1/2-20

VBOTHENDS

HG

J L

.998MAX

.062 BOTH ENDS

EE LONG TRAVEL ADJUSTMENTX GG THREAD BOTH ENDS

W

2X X SHAFT DIA

4X ZB THREAD

2X DIA FOR R DOWEL PIN

2X M

THRU DIA AND C'BOREFOR Q SHCS

2X EACH END

TBOTHENDS

DF

O N**

(TRAVEL/2) - P

B + TRAVEL

C + (2 x TRAVEL)A + (2 x TRAVEL)

Y

KBOTH ENDS

S **E

BOTHENDS

2X DIA FORU DOWEL PIN

2X Z THREADEACH END

FF WIDE SLOTTHIS END ONLY

2X BB PORTCCTYP

OPTIONAL:AA PORT LOCATIONSPECIFIED BY -C WHEN ORDERINGREPLACES BB PORTS

HH

DIMENSIONS: SERIES M

S


55

ww

w.phdinc.com


CLASSIC06

N**

MTG. HOLES: CENTERED ON CENTERLINE OF UNIT10-32 PORTS: BARB FITTINGS ARE SUPPLIED WITH UNIT**DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PINS DESIGNATED BY LETTER DIMENSION "S" & "N" IS ±.001

SEE NEXT PAGE FOR SWITCH BRACKET OPTION DIMENSIONS

HG

J L

.998MAX

VBOTHENDS

.062 MINBOTH ENDS

1" TRAVEL ADJUSTMENTX GG THREAD BOTH ENDS

TANDEM COUPLINGWITH 1/8 NPT

MTO3 UNITS ONLY

1.941

W

2X X SHAFT DIA

4X ZB THREAD

2X DIA FOR RDOWEL PIN

2X M

THRU DIA AND C'BOREFOR Q SHCS

2X EACH END

TBOTHENDSD

F

AA PORTBOTH ENDS O

.500

(TRAVEL/2) - P

B + TRAVEL

C + (2 x TRAVEL)A + (2 x TRAVEL)

Y

KBOTH ENDS

S **E

BOTHENDS

2X DIA FORU DOWEL PIN

Z THREAD2X EACH END

FF WIDE SLOTTHIS END ONLY

BORESIZE

3/4

1

1-3/8

MT03

MT04

MT06

LETTER DIMENSIONSLIDEMODEL A

3.066

3.576

4.184

B

2.000

2.250

2.650

C

2.616

2.996

3.504

D

2.460

3.250

4.340

E

1.500

2.000

2.750

F

2.620

3.420

4.500

G

.630

.730

.920

H

1.155

1.460

1.700

J

.075

.070

.070

K

.450

.580

.680

L

1.130

1.450

1.700

M

2.000

2.688

3.750

N**

3.250

3.500

5.500

O

.225

.290

.340

P

.338

.273

1.023

#10 x .225 DP

1/4 x .360 DP

5/16 x .400 DP

Q R

3/16 x .20 DP

1/4 x .40 DP

5/16 x .56 DP

S**

1.000

1.375

1.875

T

2.062

2.750

3.750

U

3/16 x .25 DP

1/4 x .30 DP

5/16 x .37 DP

V

.880

1.160

1.250

W

1.000

1.375

1.875

X

.312

.500

.750

Y

.354

.429

.446

Z

10-24 x .33 DP

1/4-20 x .40 DP

5/16-18 x .50 DP

ZB

10-24 x .28 DP

1/4-20 x .38 DP

5/16-18 x .50 DP

AA

10-32

1/8

1/8

FF

.1890 x .19 DP

.2510 x .25 DP

.3135 x .31 DP

SLIDEMODELMS02

MS03

MS04

MS06

GG1/4-28

5/16-24

3/8-24

1/2-20

DIMENSIONS: SERIES M

T


56


CLASSIC06

KITS: SERIES M SLIDES

SLIDEMODEL

Mx03 NOTES:1) SWITCHES ARE NOT PROVIDED

WITH BRACKET KIT2) EACH KIT CONTAINS 1 BRACKET

WITH 2 BUTTON HEAD CAPSCREWS

3) BRACKET MAY BE ADJUSTEDALONG LENGTH OF SLIDESADDLE

SLIDESTROKE (in) A

Mx04

Mx06

2

4

2

4

4

6

.162

.037

0.0

.162

0.0

.237

.540

.570.450

.1751.000

A MINSERIES 1750 SWITCHBRACKET KIT #13591


SERIES 1590 PROXIMITYSWITCH BRACKET KIT #11796

NOTES;1) PROXIMITY SWITCHES

ARE NOT PROVIDEDWITH BRACKET KIT

2) EACH KIT WILL CONTAIN 1BRACKET WITH 2 SOCKETHEAD CAP SCREWS

3) BRACKET MAY BEADJUSTED ALONG LENGTHOF SLIDE SADDLE IN3/8" INCREMENTS

242446

.282

.157

.032

.282

.107

.357

Mx03

Mx04

Mx06

A SLIDE

STROKE (in) SLIDEMODEL

.570.750

.545.285

.700

A MIN1.187

J8-3210-241/4-205/16-18

H1/83/161/45/16

G.7501.0001.3751.875

F1.6202.0602.7503.750

E.312.375.500.500

D2.0002.5003.5005.000

C5.0606.6207.00011.500

B8.06010.62011.00015.500

A8.41011.07011.68016.200

D

D/2

END BLOCK REF 6X THRU HOLEFOR H DOWEL PIN

8X J THREAD THRU

E

G F

CBA

LETTER DIMENSIONKIT NO.

SLIDEMODELMx02Mx03Mx04Mx06

11687-1-00011746-1-00011757-1-00011771-1-000

NOTES:1) EACH END BLOCK MTG KIT WILL CONTAIN 1

MOUNTING PLATE AS SHOWN, 4 MTG SCREWS,AND 3 DOWEL PINS

2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE3) DIMENSION “B” REPRESENTS MTG PATTERN OF

LONGEST AVAILABLE STROKE IN EACH SERIES4) DIMENSION “C” REPRESENTS MTG PATTERN OF

SHORTEST AVAILABLE STROKE IN EACH SERIES

END BLOCKMTG. PLATE

E

AD

B

B/2

2X THRU HOLE FOR FDOWEL PIN

4X THRU DIA& C'BORE FOR G SHCS

SADDLE MOUNTING PLATE

C

LETTER DIMENSIONA B C D E F G

SLIDEMODEL KIT NO.

MS02MS03MS04MS06

11792-1-00011793-1-00011794-1-00011795-1-000

3.0004.0004.2506.650

1.9602.4603.2504.340

.312

.375

.500

.500

2.4353.2503.5005.500

1.5622.0002.6883.750

1/83/16 1/45/16

# 8# 10 1/45/16

NOTES:1) EACH KIT WILL CONTAIN 1 MTG PLATE, 2 DOWEL PINS, AND 4 SHCS2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE

SERIES 1750 COMPACT REED AND HALLSWITCH BRACKET KIT

The bracket kit number is 13591. Using this bracket kit alongwith the compact switches reduces the size of the slide package.The slides must be ordered with the proper magnetic option for theswitches to function. See Switches and Sensors section of PHD’smain catalog for switch details.

BRACKET KIT NUMBER 135911750 COMPACTPROXIMITYSWITCH

57


CLAS

SIC0

6

Series SGxM Slides

SGxM


Series SM or SFP.See PHD’s main catalog.

58

ww

w.phdinc.com


CLASSIC06

ORDERING DATA: SERIES SG SLIDES WITH RODLESS CYLINDER

TO ORDER SPECIFY:Product, Series, Type, Cylinder Option,Design No., Size, Travel, and Options.

NOTES:1) All units are shock absorber ready as standard. Shock

absorber kits are ordered separately. See Slides sectionof PHD’s main catalog for complete orderinginformation.

2) Shock absorbers are not plated with -Z1 option.3) SGxM cylinder section comes standard with cushions

and magnetic piston on both ends.4) Option -CB provides targets for use with 8 mm barrel

proximity switches.5) Option -BB and -BR are not available together with

shock absorbers.

x –

DESIGN NO.3 - Imperial7 - Metric

3 3 6 BB – Q1 – Z1

SLIDE OPTIONSBB - Shock Pad both directionsBE - Shock Pad on extensionBR - Shock Pad on retractionCB - Proximity Switch ready both ends (See Note 4)GY - Saddle mounting in position 1

(Not available on size 3 slide)L6 - Lube fitting in saddle in position 3Q1 - Corrosion-resistant guide shafts (ends unplated)Z1 - Electroless nickel plated ferrous metal parts

TYPEB - Standard linear

ball bushing,standard shaft

C - TC bushing,standard shaft

D - TC bushing,oversize shaft

PRODUCTS - Slide

GS B

SERIESG - Gantry

CYLINDER OPTIONM - Rodless cylinder mounted

M

SLIDE TRAVEL (in)SIZE IMPERIAL UNITS33 1 to 1634 1 to 2035 1 to 2436 1 to 36

Available in1/4" increments.

SLIDE TRAVEL [mm]SIZE METRIC UNITS73 25 to 40574 25 to 51065 25 to 61066 25 to 915

Available in5 mm increments.

SIZE3 - 25 mm rodless cylinder with 12 mm

shaft standard, 16 mm shaft oversize4 - 25 mm rodless cylinder with 16 mm



shaft standard, 30 mm shaft oversize

SHOCK ABSORBER KITS (See Note 1)SHOCK ABS. NO.

57858-01-x57858-02-x

SLIDE MODELSGxMx3

SGxMx4, SGxMx5, SGxMx6

H39–

59


CLAS

SIC0

6

DIMENSIONS: SERIES SG SLIDES WITH RODLESS CYLINDER


EE

B + TRAVEL

HH

GGII

A + TRAVELMM

MM

OOCL

NN

4X THRU Ø & COUNTERBOREFOR S SHCS

J

JJG

L

4X T THREAD THIS SIDE,COUNTERBORE FROM THE

OPPOSITE SIDE FORQ SHCS

R

E*

FP

M

O

2X Ø X1 SHAFT FORSGB & SGC UNITS

2X Ø X2 SHAFT FORSGD UNIT

C + TRAVEL

N

D

1/2 [12.7] MAX TRAVELADJUSTMENT

K BOTH ENDS

O

Ø R +.001/-.000[+.025/-.000] FORDOWEL PIN, U DP

W

2

1

4

3

CC

2X Ø Z +.001/-.000[+.025/-.000] FORDOWEL PIN, AA DP

CL

Y

I

1 [25.4] MAXTRAVEL

ADJUSTMENT

DD

LL + TRAVEL

2X KK THD THRUSHOCK MOUNTING HOLE

FF

H

6X BB PORTS

2X CUSHIONNEEDLE THISSIDE ONLY

E*

*DIMENSION E IS FROM CENTERLINE OF GUIDE SHAFT.

EXTENSION END RETRACTION END

HH* TRAVELADJUSTMENT

HH* STROKEADJUSTMENT

60


CLASSIC06

SLIDE SIZELETTER SGxMx3 SGxMx4 SGxMx5 SGxMx6

DIM. in mm in mm in mm in mmA 8.766 222.7 8.766 222.7 10.964 278.5 12.917 328.1B 7.546 191.7 8.609 218.7 9.576 243.2 10.736 272.7C 5.709 145 6.457 164 7.461 189.5 8.465 215D 3.996 101.5 4.744 120.5 5.748 146 6.752 171.5E 1.5945 40.5 1.9095 48.5 2.0960 53.25 2.3030 58.5F 4.960 126 5.787 147 6.536 166 7.046 179G .965 24.5 1.063 27 1.220 31 1.299 33H .965 24.5 1.064 27 1.219 31 1.299 33I 4.803 122 5.630 143 6.338 161 6.811 173J .039 1 .039 1 .039 1 .039 1K .984 25 .984 25 .984 25 .984 25L 1.772 45 2.008 51 2.283 58 2.441 62M 1.378 35 1.535 39 1.417 36 1.594 40.5N 1.968 50 1.870 47.5 2.284 58 2.559 65O .492 12.5 .492 12.5 .492 12.5 .492 12.5P 4.252 108 4.960 126 5.790 147 6.300 160Q #10 M5 1/4 M6 5/16 M8 3/8 M10R .3129 8 .3129 8 .3129 8 .3129 8S 1/4 M6 5/16 M8 3/8 M10 3/8 M10T 1/4-20 x .63 M6 x 1.0 x 16 5/16-18 x 1 M8 x 1.25 x 25 3/8-16 x 1 M10 x 1.5 x 25 1/2-13 x 1 M12 x 1.75 x 25U .236 6 .236 6 .236 6 .236 6W 3.189 81 3.819 97 4.192 106.5 4.606 117X1 .472 12 .630 16 .787 20 .984 25X2 .630 16 .787 20 .984 25 1.181 30Y .354 9 .354 9 .354 9 .354 9Z .3129 8 .3129 8 .3129 8 .3129 8

AA .49 12.5 .49 12.5 .49 12.5 .49 12.5BB 1/8 NPT 1/8 BSP 1/8 NPT 1/8 BSP 1/4 NPT 1/4 BSP 1/4 NPT 1/4 BSPCC 3.012 76.5 3.956 100.5 4.488 114 5.492 139.5DD .335 8.5 .335 8.5 .335 8.5 .335 8.5EE 7.742 196.6 8.568 217.6 10.123 257.1 11.061 280.9FF 4.643 117.9 5.675 144.1 6.569 166.9 6.925 175.9GG 1.776 45.1 1.874 47.6 2.264 57.5 2.539 64.5HH .984 25 1.142 29 1.226 31.2 1.371 34.8II .155 4.0 .254 6.5 0.174 4.4 .059 1.5JJ 1.811 46 2.046 52 2.323 59 2.480 63KK M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5LL 6.693 170 7.441 189 8.445 214.5 9.449 240

MM .33 8.4 .33 8.4 .41 10.4 .41 13.0NN .71 18 .71 18 .83 21.6 .71 18OO .26 6.6 .26 6.6 .35 8.9 .51 13.0

DIMENSIONS: SERIES SG SLIDES WITH RODLESS CYLINDER

61


CLAS

SIC0

6

We recommend Series GRW Grippers.For more information, see PHD’s main catalog.

BENEFITS■ True parallel synchronous jaw motion simplifies jaw tooling

design.

■ Large diameter jaw guides supported through the length of thebody provide superior jaw stability, long allowable toolinglengths, and high moment capability.

■ Standard shock pads at both ends of jaw travel provide quietoperation and absorb impact.

■ Double acting for use in both internal and external grippingapplications.

■ Specially formulated piston and rod seals provide longservice life.

■ Optional manifold porting available on either of the twostandard mounting surfaces.

■ Optional 4 mm and 8 mm round inductive proximity switchesor 6 mm square Hall Effect switches are available for indicationof jaw position and simple interfacing to electronic systemcontrols.

■ Units can be field converted to a non-synchronous version.

■ Units are fully field repairable.

U.S. Patent No. 6,598,918 European Patent No. EP1080851

We recommend Series GRC Grippers.For more information, see PHD’s main catalog.

BENEFITS■ Available in four sizes with two jaw and body styles for

maximum application versatility.

■ High grip force to weight ratio for efficient use of spaceand power.

■ True parallel jaw travel with no arcing motion for easytooling design.

■ Double-acting for either internal or external grippingapplications.

■ Optional spring assist can be specified to obtain maximumgripping force.

■ Close tolerance jaw mechanism eliminates jaw play. Use ofdowel pin holes and/or male keys provides precise positioningof tooling.

■ Rugged jaw and body construction can withstand high impactand shock loads.

■ Reed, Hall or Proximity Switches are available for indication ofjaw position and easy interfacing to a system controller.

■ Internal jaw mechanism is constructed of hardened steelcomponents and is enclosed for a minimum life of 10 milliontrouble-free cycles.

U.S. Patent No. 4768821

■ SHURGRIP version available for restraining jaw movement andretaining the part upon loss of air pressure. Licensed underU.S. Patent Number 4768821.

■ SHURGRIP available with enclosed proximity switches to preventfalse signals in applications where metal chips are present.

■ SHURGRIP available with a manual operator located on thebottom of the unit to allow the jaws to be opened and closedwithout air pressure for easy set up and adjustment of tooling.

62


CLASSIC06

Series 8600 Parallel Grippers


Series GRW & GRC Grippers.See PHD’s main catalog.

8600

63

ww

w.phdinc.com


CLASSIC06

ORDERING DATA: SERIES 8600 PARALLEL GRIPPERS

See Switches and Sensors section in PHD’s maincatalog for information.

TO ORDER SPECIFY:Model, Design No., Options, and Seals.

8660 01

DESIGN NO.

- - 0 0 1

SEALS1 - Buna-N2 - Fluoro-Elastomer

MODEL(2-JAW PARALLEL)

8660 - Size 28670 - Size 38680 - Size 48690 - Size 5 OPTIONS

OPTIONS0 - None3 - Hall Sensor (See note.)

NOTE: Sensor must be used with a PHDSet Point Module.

0

OPTIONS

PART NO.9800-01-03009800-01-0400

SET POINT MODULEDESCRIPTION

4.5-24 VDC, Sink Type Output4.5-24 VDC, Source Type Output

CUSTOM GRIPPERS ARE AVAILABLE. PLEASE CONSULT PHD.

64


CLASSIC06

DIMENSIONS: SERIES 8600 PARALLEL GRIPPERS

*TOLERANCE IS ±.0005• A CLOSED REFLECTS THE LARGEST POSSIBLE CLOSED DIMENSION.A OPEN REFLECTS THE SMALLEST POSSIBLE OPEN DIMENSION.

PAC

P

4X Q THREAD

BB/2

S

H

LK

JTOTAL DISTANCE JAW WILL TRAVEL FROMMID-STROKE TO A MIN & A MAX

P

V SQA

Y

X

MR

2X Q THREAD

4X Q THREADF/2

F E

FB D

4X HOLE FOR WA DOWELPIN EACH JAW

2X G THREADEACH JAW

P SQU*

OPTIONAL HALLSENSOR LOCATION

2X HOLE FOR WDOWEL PIN

N* FB

FAFA/2

4X Z THREADEACH JAW

CCDD2X 1/8 NPT

GRIPPER JAWS: SHOWN AT MID-STROKEJAW MOUNTING SURFACES: THIS SURFACE MAY VARY WITH RESPECT TO “K” DIMENSION BETWEEN UNITS. CONSULT FACTORY IF THIS DIMENSION IS CRITICAL TO THE APPLICATION OF THIS UNIT.

AA

JAW PIVOT

.94

6.667.602.2506.8751.500.3751.2501.0001.060

5/16-18 x .44 DP3.000.0163.3771.9152.262.75001.5002.750

1/4-20 x .38 DP2.950.650

1.75002.250

3/16 x .250 DP3/16 x .312 DP

1.4402.000

1/4-20 x .38 DP.2201.850.690

8670

1.25

8.139.382.7508.3752.000.5301.5001.2501.375

3/8-16 x .56 DP3.625.0224.3392.5102.6151.12501.7503.375

5/16-18 x .44 DP3.490.769

2.18802.750

1/4 x .250 DP1/4 x .375 DP

1.9002.500

5/16-18 x .50 DP.2812.155.895

8680

1.75

11.6313.384.00011.7502.500.6252.2501.6251.750

1/2-13 x .69 DP5.125.0305.9503.4503.6251.75002.7505.000

3/8-16 x .56 DP4.8101.1253.12504.000

5/16 x .312 DP3/8 x .500 DP

2.4003.500

3/8-16 x .62 DP.3443.0001.240

8690LETTER

DIM.NOMINAL

JAW TRAVELA CLOSED •

A OPEN •

BCDEF

FAFBGHJKLMN*P

PAQRS

U*VW

WAXYZ

AACCDD

.57

5.095.661.7505.1251.250.312.875.812.875

1/4-20 x .38 DP2.250.0102.4141.1871.690.70001.2502.250

10-24 x .38 DP2.315.477

1.37501.750

5/32 x .187 DP1/8 x .250 DP

1.2001.500

10-24 x .31 DP.1871.315.625

8660MODEL NUMBER


65


CLAS

SIC0

6

SERIES 7900 PARALLEL GRIPPERS


Series GRW & GRC Grippers.See PHD’s main catalog.

7900

66

ww

w.phdinc.com


CLASSIC06

ORDERING DATA: SERIES 7900 PARALLEL GRIPPERSTO ORDER SPECIFY:Model, Design No., Options, Port Type, and Seals.

7960 03

DESIGN NO.

- - 1 1 1


IMPERIAL MODEL7960 - Size 67970 - Size 77980 - Size 87990* - Size 9

OPTIONS0 - None1 - Magnet and Switch Bracket for use with

PHD Series 1590 Reed Switches2 - Magnet and Switch Bracket for use with

PHD Series 1590 Hall Effect Switches5 - Reed Magnet and Switch Bracket Kit

for 1750 Reed Switches6 - Hall Magnet and Switch Bracket Kit for

1750 Hall Effect Switches

0

OPTIONS

PORT TYPE1 - NPT (BSP Straight Thread)2 - SAE O-Ring Ports

METRIC MODEL7962 - Size 67972 - Size 77982 - Size 87992* - Size 9

SERIES 1590 LIQUID RESISTANT SWITCHES

DESCRIPTIONPART NO.15902-115900-115901-1

Sink and /or Source Type 4.5-24 VDC10 Watt Reed SwitchTriac

HALL

REED See Switches and Sensors section in PHD’s main catalog forswitch information.

SERIES 1750 COMPACT PROXIMITY SWITCHES

DESCRIPTIONPART NO.17503-2-0617504-2-0617523-217524-217502-2-0617509-3-0617522-217529-3

Sink Type 4.5-24 VDCSource Type 4.5-24 VDCSink Type 4.5-24 VDC, Quick ConnectSource Type 4.5-24 VDC, Quick ConnectSink or Source Type 4.5-24 VDCAC Type 110-120 VAC with Current LimitSink or Source Type VDC, Quick ConnectAC Type 110-120 VAC, Quick Connect with Current Limit

HALL

REED

Switches must be ordered separately.

*Models 799x are for pneumatic service only.


67


CLAS

SIC0

6

DIMENSIONS: SERIES 7900 PARALLEL GRIPPERS

•A CLOSED REFLECTS THE LARGEST POSSIBLE CLOSED DIMENSION.A OPEN REFLECTS THE SMALLEST POSSIBLE OPEN DIMENSION.

EE**

NOMINALJAW TRAVELA CLOSED •

A OPEN •

BCDEFG

HKLMN*OPQ

RST

U*VW

XYZ

AABB NPTBB SAE

CCDDEE

U*T

P SQN*

O

Z

4X Q THREAD2X HOLE FOR

W DOWEL PIN

Y

XKL

S

M

O

N*R

P SQ

8X Q THREAD

V SQU*

T

4X HOLE FORW DOWEL PIN

A

C

B

B/2 F E

D

4X G THREADEACH JAW

CCDD

2X BB PORT

H

AA F CAVITY FOR OPTIONALPROXIMITY SWITCHES

.62

4.164.72

1.8754.000.960.270.625

1/4-20 x.31 DP.625

1.6041.540.750

.7000.275

1.25010-24 x.38 DP2.625.062.687

1.37501.7505/32 x

.187 DP1.2601.170.350.437

1/8 NPT3/8-24.438

1.656.040

1.00

5.716.65

2.2505.5001.130.420.750

5/16-18 x.38 DP.750

2.1612.1001.000.7500.375

1.5001/4-20 x.38 DP3.187.062.875

1.75002.2503/16 x

.250 DP1.7261.600.375.680

1/8 NPT7/16-20

.5032.049

0

1.31

7.228.47

3.0007.0001.440.430

1.0003/8-16 x.44 DP1.0002.8272.7401.000

1.1250.312

1.7505/16-18x .44 DP

3.625.087

1.0942.18802.7501/4 x

.250 DP2.2001.860.562.880

1/8 NPT1/2-20.542

2.388.035

1.80

9.9811.694.0009.5002.190.460

1.5001/2-13 x.56 DP1.5003.8113.6801.125

1.7500.500

2.7503/8-16 x.56 DP4.750.131

1.5623.12504.0005/16 x

.312 DP3.0002.420.875

1.0501/4 NPT9/16-18

.6363.176.050

15.8

105.6119.947.5

101.524.57.0

16.0M6 x 1 x7.9 DP16.040.539.019.0

17.787.0

32.0M5 x 0.8x 9.7 DP

66.51.5

17.534.9244.54.0 x

5.0 DP32.030.09.0

11.01/8 BSP

—11.042.01.0

25.4

145.0168.957.0

140.029.010.519.0

M8 x 1.25x 9.7 DP

19.055.053.525.5

19.059.5

38.0M6 x 1.0x 9.7 DP

81.01.5

22.044.4557.05.0 x

6.5 DP44.040.59.5

17.01/8 BSP

—13.052.0

0

33.3

183.4215.176.0

178.036.511.025.5

M10 x 1.5x 11.2 DP

25.572.069.525.5

28.578.0

44.5M8 x 1.25x 11.2 DP

92.02.5

27.555.5770.07.0 x

6.5 DP56.047.014.522.5

1/8 BSP—

14.060.51.0

45.8

253.5296.9

101.50241.5055.511.538.0

M12 x 1.75x 14.2 DP

38.097.093.528.5

44.4513.070.0

M10 x 1.50x 14.2 DP

120.53.5

39.579.37101.58.0 x

8.0 DP76.061.522.027.0

1/4 BSP—

16.080.51.0

LETTERDIM.

MODEL NUMBER

NOTES:1) *TOLERANCE IS ±.0005 [±0.012]2) **EE DIMENSION IS TO BUSHING BLOCK MTG SCREWS3) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm

7960in

7962mm

7970in

7972mm

7980in

7982mm

7990in

7992mm


68


CLASSIC06

We recommend Series GRB 180 ° Jaw Motion Grippers.For more information, see PHD’s main catalog.

We recommend Series 5300 Angular Oval Grippers.For more information, see PHD’s main catalog.

BENEFITS■ Double-acting for either internal or external gripping

applications.

■ Optional internal springs allow the unit to be used as a single-acting gripper, for additional grip force, or for grasping anobject without air pressure.

■ Close tolerance jaw mechanism minimizes jaw play.

■ Hardened steel pivot mechanism provides long life andlow maintenance.

■ Available in four sizes to cover a wide range of applicationrequirements.

■ Available with a PHD Hall Effect Sensor or with PHD Hall EffectProximity Switches for indication of jaw position andinterfacing with various controllers and logic systems.

BENEFITS■ Series GRB Grippers provide up to 180° of angular jaw travel

allowing the jaws to completely retract from the work areaeliminating an otherwise required axis of travel.

■ Jaws rotate completely clear of work area eliminating anotherwise required axis of travel

■ Three standard jaw rotations available: 60°, 90°, and 180°

■ One piece body minimizes jaw play

■ Internal speed restriction removes the need for externalspeed controls in standard applications

■ All units incorporate twin switch slots for flush switchmounting

■ Two mounting surfaces

■ Six sizes available

■ 1-2 day shipping

■ 5 million cycles minimum rated life

69


CLAS

SIC0

6

Series 8600 2 Jaw Angular Grippers



8600 2 jaw

70

ww

w.phdinc.com


CLASSIC06

See Switches and Sensors section in PHD’s maincatalog for information.

TO ORDER SPECIFY:Model, Design No., Options, and Seals.

8621 01

DESIGN NO.

- - 0 0 1


OPTIONS

IMPERIAL MODEL8621 - Size 28631 - Size 38641 - Size 48651 - Size 5

OPTIONS0 - None3 - Hall Sensor4 - Sensor Ready

0

OPTIONSMETRIC MODEL8623 - Size 28633 - Size 38643 - Size 48653 - Size 5

PART NO.9800-01-03009800-01-0400

SET POINT MODULEDESCRIPTION

4.5-24 VDC, Sink Type Output4.5-24 VDC, Source Type Output

NOTE: Sensor must be used with a PHD Set PointModule which is ordered separately. See Switchesand Sensors section in PHD’s main catalog forinformation and ordering data.

ORDERING DATA: SERIES 8600 ANGULAR GRIPPERSCUSTOM GRIPPERS ARE AVAILABLE. PLEASE CONSULT PHD.

71


CLAS

SIC0

6


GRIPPER JAWS: SHOWN AT MID-ROTATION

JAW MOVEMENT SHOWS MINIMUM AMOUNT OF JAWROTATION. JAWS MAY OPEN 3° OR CLOSE 3° BEYONDSTATED MINIMUM ROTATION.

2X HOLEFOR W

DOWEL PIN4X Q THREAD

TU*

P SQN*

ZO

DD

SK

6X QTHREAD

RM

L

X

Y

AH J

6.5° MIN

V SQ

P

EF

4X G THREADEACH JAW

B

B/2

C

D

2X 1/8 NPT [1/8 BSP]

OPTIONAL HALL SENSORLOCATION

REF JAW PIVOTCENTERLINE CC

FAA

8621in

ABCDEFG

HJKLMN*OPQ

RST

U*VW

XYZ

AACCDD

NOTES:1) *TOLERANCE IS ±.0005 [±0.012]2) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm

MODEL NUMBER

LETTERDIM

5.0002.2504.000.875.187.750

5/16-18x .44 DP

1.5001.000.968.562

1.534.7500.375

1.5001/4-20 x.38 DP2.222.438.875

1.75002.2503/16 x

.250 DP1.3751.875.375.095.410.690

127.057.0

102.022.05.0

19.0M8 x 1.25x 11.0 DP

38.025.524.514.539.0

19.059.5

38.0M6 x 1.0x 9.5 DP

56.511.022.0

44.4557.05.0 x

6.0 DP35.047.59.52.5

10.517.5

6.2362.7505.5001.000.063

1.0003/8-16 x.56 DP2.0001.1181.200.688

1.7751.1250

.3121.750

5/16-18 x.44 DP2.650.562

1.0942.18802.7501/4 x

.250 DP1.7002.430.562.150.440.895

158.070.0

140.025.51.5

25.5M10 x 1.5x 14.0 DP

51.028.030.517.545.0

28.578.0

45.0M8 x 1.25x 11.0 DP

67.514.528.0

55.5770.07.0 x

6.0 DP43.062.014.54.0

11.023.0

8.6104.0007.5001.5000.00

1.5001/2-13 x.75 DP2.8751.4301.6801.1252.500

1.7500.500

2.7503/8-16 x.56 DP3.685.845

1.5623.12504.0005/16 x

.312 DP2.4303.430.875.300.570

1.240

219.0102.0190.538.00.038.0

M12 x 1.75x 19.0 DP

73.036.543.028.563.544.4513.070.0

M10 x 1.50x 14.0 DP

93.521.539.579.37102.08.0 x

8.0 DP62.087.022.07.514.531.5

8623mm

8631in

8633mm

8641in

8643mm

8651in

8653mm

6.5° MIN

100.044.571.519.06.016.0

M6 x 1 x9.5 DP27.023.021.011.030. 017.78

7.032.0

M5 x 0.8 x9.5 DP46.08.017.534.9244.54.0 x

5.0 DP28.538.09.01.59.516.0

3.9371.7502.812.750.231.625

1/4-20 x.38 DP1.062.906.813.438

1.188.7000.275

1.25010-24 x.38 DP1.813.312.687

1.37501.7505/32 x

.187 DP1.1251.500.350.062.375.625

DIMENSIONS: SERIES 8600 ANGULAR GRIPPERS

72


CLASSIC06

BENEFITS■ Three jaw design provides self-centering and maximum contact

between part and jaw tooling, making these grippers ideal forhigh moment applications.

■ Very low profile to grip force and jaw travel ratios are ideal foruse in confined work areas.

■ Eight sizes are offered in both imperial and metric versions formaximum application versatility.

■ Jaw motion is true parallel and synchronous for easy design ofjaw tooling.

■ Pneumatically powered units are double acting for use in bothinternal and external applications.

■ Close tolerance jaw mechanism made of hardened steeleliminates play and is enclosed for a minimum 10 milliontrouble-free cycles.

■ Male and female keys are standard on jaws providing precisionpositioning of jaw tooling.

■ Proximity switches are available for indications of jaw position.

■ Units are fully field repairable.

■ Optional spring assist can be specified to enhance maximumgripping force or for part retention upon loss of air pressure.

■ Optional part ejector assists in part location upon grip release.

■ Finger blanks are available for custom fitting of fingers to thepart’s shape.

We recommend Series GRT Grippers.For more information, see PHD’s main catalog.

73


CLAS

SIC0

6

Series 7900 2 & 3 Jaw Angular Grippers


Series GRT Grippers.See PHD’s main catalog.



7900 2, 3 jaw

74

ww

w.phdinc.com


CLASSIC06

ORDERING DATA: SERIES 7900 ANGULAR GRIPPERS

NOTES:1) Sensor must be used with a PHD Set Point Module. See

Switches and Sensors section in PHD’s main catalog forinformation and ordering data.

2) 792x Grippers are available with one switch only. All otherunits are available for use with two switches.

3) Switches must be ordered separately.4) *SAE not available on metric units.5) **Models 795x are for pneumatic service only.

TO ORDER SPECIFY:Model, Design No., Options, Port Type,and Seals.

7920 02- - 1 1 10

OPTIONS0 - None1 - Magnet and Switch Bracket for use with PHD Series 1590 Reed Switches2 - Magnet and Switch Bracket for use with PHD Series 1590 Hall Effect Switches3 - Hall Sensor (See note 1.)4 - Sensor Ready5 - Reed Magnet and Switch Bracket Kit for 1750 Reed Switches6 - Hall Magnet and Switch Bracket Kit for 1750 Hall Effect Switches

OPTIONSIMPERIAL MODEL2 JAW ANGULAR

7920 - Size 2, Jaw Style 17921 - Size 2, Jaw Style 27930 - Size 3, Jaw Style 17931 - Size 3, Jaw Style 27940 - Size 4, Jaw Style 17941 - Size 4, Jaw Style 2

**7950 - Size 5, Jaw Style 1**7951 - Size 5, Jaw Style 2

3 JAW ANGULAR7924 - Size 27934 - Size 37944 - Size 4

**7954 - Size 5


DESIGN NO.01 - 7900 3-Jaw Angular02 - 7900 2-Jaw Angular

PORT TYPE1 - NPT [BSP]2*- SAE O-Ring Ports

METRIC MODEL2 JAW ANGULAR

7922 - Size 2, Jaw Style 17923 - Size 2, Jaw Style 27932 - Size 3, Jaw Style 17933 - Size 3, Jaw Style 27942 - Size 4, Jaw Style 17943 - Size 4, Jaw Style 2

**7952 - Size 5, Jaw Style 1**7953 - Size 5, Jaw Style 2

3 JAW ANGULAR7925 - Size 27935 - Size 37945 - Size 4

**7955 - Size 5

SERIES 1590 LIQUID RESISTANT SWITCHES

DESCRIPTIONPART NO.15902-115900-115901-1

Sink and /or Source Type 4.5-24 VDC10 Watt Reed SwitchTriac

HALL

REED

See Switches and Sensors section in PHD’s main catalogfor information.

SERIES 1750 COMPACT PROXIMITY SWITCHES

DESCRIPTIONPART NO.17503-2-0617504-2-0617523-217524-217502-2-0617509-3-0617522-217529-3

Sink Type 4.5-24 VDCSource Type 4.5-24 VDCSink Type 4.5-24 VDC, Quick ConnectSource Type 4.5-24 VDC, Quick ConnectSink or Source Type 4.5-24 VDCAC Type 110-120 VAC with Current LimitSink or Source Type VDC, Quick ConnectAC Type 110-120 VAC, Quick Connect with Current Limit

HALL

REED

See Switches and Sensors section in PHD’s main catalog forinformation.


75


CLAS

SIC0

6

DIMENSIONS: SERIES 7900 ANGULAR GRIPPERS - JAW STYLE 1

CAVITY FOR OPTIONALPROXIMITY SWITCHES

2X BB PORTOPTIONAL HALL SENSORLOCATION

REF JAW PIVOTCENTERLINE CCDD

D

F AAC'BORED THRUHOLE FORG SCREW

B

B/2

C

S

K

4X HOLEFOR W

DOWEL PIN

8X QTHREAD

N*

O

P SQ

R

M

L

V SQU*

T

X

Y A

EE MAXGRIPPERMECHANISM

H

1.5° MIN11.5° MIN

4X Q THREAD

TU*

P SQN*Z

O

2X HOLEFOR W

DOWEL PIN

GRIPPER JAWS: SHOWN AT PARALLEL POSITION


7920in

7922mm

7930in

7932mm

7940in

7942mm

7950in

7952mm

ABCDFGHKLMN*OPQ

RST

U*VW

XYZ

AABB

BB SAECCDDEE

130.0101.5190.538.089.0M1073.0

145.528.557.0

44.4513.070.0

M10 x 1.50 x14.0 DP149.222.039.5

79.37101.5

8.0 x 8.0

124.017.522.044.5

1/4 BSP—

16.080.56.5

5.1254.0007.5001.5003.5003/8

2.8755.7341.1252.250

1.7500.500

2.7503/8-16 x.56 DP5.875.845

1.5623.12504.0005/16 x

.312 DP4.889.688.875

1.7501/4 NPT9/16-18

.6363.176.250

89.070.0

140.025.570.0M851.0

116.517.543.0

28.578.0

44.5M8 x 1.25 x

11.0 DP109.514.027.5

55.5770.0

7.0 x 6.5

102.015.014.033.5

1/8 BSP—

14.060.55.0

3.5002.7505.5001.0002.7505/162.0004.587.688

1.6881.1250.312

1.7505/16-18 x

.44 DP4.312.562

1.0942.18802.7501/4 x

.250 DP4.025.598.562

1.3121/8 NPT1/2-20.542

2.388.200

63.557.0

101.522.051.0M638.086.014.039.5

19.059.5

38.0M6 x 1.0 x

9.5 DP95.211.022.0

44.4557.0

5.0 x 6.5

75.512.09.5

23.01/8 BSP

—13.052.04.0

2.5002.2504.000.875

2.0001/4

1.5003.390.562

1.562.7500.375

1.5001/4-20 x.38 DP3.749.438.875

1.75002.2503/16 x

.250 DP2.965.465.375.900

1/8 NPT7/16-20

.5032.049.160

46.044.571.519.038.0M427.062.011.030.0

17.787.0

32.0M5 x 0.8 x

9.5 DP77.88.0

17.534.9244.5

4.0 x 5.0

54.07.59.0

17.51/8 BSP

—11.042.03.5

1.8121.7502.812.750

1.500#10

1.0622.438.438

1.188.7000.275

1.25010-24 x.38 DP3.063.312.687

1.37501.7505/32 x

.187 DP2.126.285.350.688

1/8 NPT3/8-24.438

1.656.130


MODEL NUMBERLETTER

DIM


76


CLASSIC06

DIMENSIONS: SERIES 7900 ANGULAR GRIPPERS - JAW STYLE 2


2X HOLEFOR W

DOWEL PIN4X Q THREAD

TU*

P SQN*Z

O

6.5°MIN

CAVITY FOR OPTIONALPROXIMITY SWITCHES

2X BB PORTOPTIONAL HALL SENSORLOCATION

REF JAW PIVOTCENTERLINE CCDD

FAA

EF

4X G THREADEACH JAW

B

B/2

C

D

SK

4X HOLEFOR W

DOWEL PIN

8X QTHREAD

N*

O

P SQ

R

M

L

X

Y

AH J

V SQU*

T

GRIPPER JAWS: SHOWN AT MID-POINT OF JAW ROTATION


7921in

7923mm

7931in

7933mm

7941in

7943mm

7951in

7953mm

6.5°MIN

ABCDEFG

HJKLMN*OPQ

RST

U*VW

XYZ

AABB

BB SAECCDD

3.9371.7502.812.750.231.625

1/4-20 x.38 DP1.062.906.813.4381.188.7000.2751.250

10-24 x.38 DP3.063.312.687

1.37501.7505/32 x

.187 DP1.1251.500.350.062

1/8 NPT3/8-24.4381.656

100.044.571.519.06.016.0

M6 x 1 x9.5 DP27.023.021.011.030.017.78

7.032.0

M5 x 0.8 x9.5 DP77.88.017.534.9244.5

4.0 x 5.0

28.538.08.51.5

1/8 BSP—

11.042.0

5.0002.2504.000.875.187.750

5/16-18 x.44 DP1.5001.000.968.5621.562.7500.3751.500

1/4-20 x.38 DP3.749.438.875

1.75002.2503/16 x

.250 DP1.3751.875.375.095

1/8 NPT7/16-20

.5032.049

127.057.0101.522.05.019.0

M8 x 1.25 x11.0 DP

38.025.524.514.039.519.05

9.538.0

M6 x 1.0 x9.5 DP95.211.022.044.4557.0

5.0 x 6.5

35.047.59.52.5

1/8 BSP—

13.052.0

6.2362.7505.5001.000.0631.000

3/8-16 x.56 DP2.0001.1181.200.6881.6881.1250

.3121.750

5/16-18x .44 DP

4.312.5621.0942.18802.7501/4 x

.250 DP1.7002.430.562.150

1/8 NPT1/2-20.5422.388

158.070.0140.025.51.525.5

M10 x 1.5 x14.0 DP

51.028.030.517.543.028.57

8.044.5

M8 x 1.25 x11.0 DP109.514.027.555.5770.0

7.0 x 6.5

43.062.014.04.0

1/8 BSP—

13.561.0

8.6104.0007.5001.5000.001.500

1/2-13 x.75 DP2.8751.4301.6801.1252.2501.7500

.5002.750

3/8-16 x.56 DP5.875.8451.5623.12504.0005/16 x

.312 DP2.4303.430.875.300

1/4 NPT9/16-18

.6363.176

219.0101.5190.538.00.038.0

M12 x 1.75x 19.0 DP

73.036.543.028.557.044.4513.070.0

M10 x 1.50x 14.0 DP

149.222.039.579.37101.5

8.0 x 8.0

62.087.022.07.5

1/4 BSP—

16.081.0


MODEL NUMBERLETTER

DIM

77


CLAS

SIC0

6

DIMENSIONS: SERIES 7900 3 JAW ANGULAR GRIPPERS

1.2463.000.500.020.437

10-24 x.28 DP1.056.550.640.813

1.563.7000.275

1.25010-24 x.38 DP3.438.307.687

1.37501.7505/32 x

.187 DP.875

1.188.350.017

1/8 NPT3/8-24.438

1.656

31.576.013.00.5

11.0M5 x 0.8x 7.0 DP

27.014.016.520.540.0

17.787.0

32.0M5 x 0.8x 9.5 DP

87.58.0

17.534.9244.54.0 x

5.0 DP22.030.09.00.5

1/8 BSP—

11.042.0

1.5873.750.750.231.625

1/4-20 x.38 DP1.250.906.813.816

1.816.7500.375

1.5001/4-20 x.38 DP4.000.434.875

1.75002.2503/16 x

.250 DP1.1251.500.375.062

1/8 NPT7/16-20

.5032.049

40.595.019.06.0

16.0M6 x 1.0x 9.5 DP

32.023.020.521.046.0

19.059.5

38.0M6 x 1.0x 9.5 DP

101.511.022.0

44.4557.05.0 x

6.5 DP28.538.09.51.5

1/8 BSP—

13.052.0

2.0224.750.875.187.750

5/16-18 x.44 DP1.6251.000.968.940

1.9411.1250

.3121.750

5/16-18 x.44 DP4.565.560

1.0942.18802.7501/4 x

.250 DP1.3751.875.562.095

1/8 NPT1/2-20.542

2.388

51.5120.522.05.0

19.0M8 x 1.25x 11.0 DP

41.025.524.524.049.5

28.578.0

44.5M8 x 1.25x 11.0 DP

116.014.027.5

55.5770.07.0 x

6.5 DP35.047.514.02.5

1/8 BSP—

14.060.5

2.5946.2501.000.063

1.0003/8-16 x.56 DP2.3121.1181.2001.2462.371

1.7500.500

2.7503/8-16 x.56 DP5.996.754

1.5623.12504.0005/16 x

.312 DP1.7002.430.875.150

1/4 NPT9/16-18

.6363.176

66.0159.025.51.525.5

M10 x 1.50x 14.5 DP

59.028.530.531.560.044.4513.070.0

M10 x 1.50x 14.0 DP

152.019.039.579.37101.58.0 x

8.0 DP43.062.022.04.0

1/4 BSP—

16.080.5


R

P SQ

L

SK

O

N*

8X QTHREAD4X HOLE

FOR WDOWEL PIN

U*T

V SQ

REF JAW PIVOTCENTERLINE

AA

X F

M

C DIAU*

T

O

ZN*P SQ

4X Q THREAD2X HOLE FORW DOWEL PIN

OPTIONAL HALLSENSOR LOCATION

120°

Y

F

E

D

J

H

4X G THREADEACH JAW

2X BB PORT

DD

B

6.5˚ MINCAVITY FOR OPTIONALREED & HALL SWITCHES

CC

6.5˚ MIN


MODEL NUMBERLETTER

DIMBCDEFG

HJKLMN*OPQ

RST

U*VW

XYZ

AABB

BB SAECCDD

7924in

7925mm

7934in

7935mm

7944in

7945mm

7954in

7955mm


78


CLASSIC06

Series 190 Angular Grippers

190

gripper shown withfinger blank kit

79www.phdinc.com/products/classic • (800) 624-8511

CLAS

SIC0

6

ORDERING DATA: SERIES 190 ANGULAR GRIPPERSTO

OR

DER

SPE

CIFY

:M

odel

, Des

ign

No.

, Sen

sor o

r Sw

itch

Opt

ions

,Sp

ring

Opt

ions

, and

Sea

ls.

1900

25

--

40

20

DES

IGN

NO

.OP

TION

S

SPR

ING

OPT

ION

S0

-N

one

1-

Sprin

g cl

ose

(Sin

gle

actin

g on

ly)

2-

Sprin

g op

en(C

an b

e us

ed a

s do

uble

act

ing)

Opt

ions

-1 a

nd -2

not

ava

ilabl

e on

Mod

el 1

9002

SEAL

S2

- Flu

oro-

Elas

tom

er(S

tand

ard)

SEN

SOR

OR

SW

ITCH

OPT

ION

S4

-H

all S

enso

r Rea

dy o

r JC1

STP-

x Se

nsor

R

eady

(See

not

es 1

& 2

.)(N

ot a

vaila

ble

with

spr

ing

optio

n)5

-Pr

oxim

ity S

witc

h R

eady

(4 m

m ro

und

switc

hes)

MO

DEL

BO

RE

SIZE

NO

.m

m(i

n)19

002

8.7

(.343

)19

012

12.7

(.500

)19

022

19(.7

50)

1903

225

.4(1

.00)

PRO

XIM

ITY

SWIT

CHBR

ACKE

T &

TAR

GET

KIT

S

MO

DEL

NO

.19

002

1901

219

022

1903

2

PART

NO

.18

074

1809

018

075

1809

1

HAL

L SE

NSO

R K

ITS

MO

DEL

NO

.19

002

1901

219

022

1903

2N

ot a

vaila

ble

with

spr

ing

optio

n.

PART

NO

.18

057-

0418

058-

0418

059-

0418

060-

04

PRO

XIM

ITY

SWIT

CHES

DES

CRIP

TIO

NPA

RT N

O.

1843

0-00

1-02

1843

0-00

2-02

4 m

m R

ound

Cur

rent

Sin

king

(NPN

)4

mm

Rou

nd C

urre

nt S

ourc

ing

(PN

P)Se

e Sw

itche

s an

d Se

nsor

s se

ctio

n fo

r det

ails

.

FIN

GER

BLA

NK

KITS

MO

DEL

NO

.19

002

1901

219

022

1903

2

PART

NO

.18

070

1807

118

072

1807

3

Incl

udes

one

eac

h: ta

rget

,br

acke

t, an

d sc

rew

NO

TES:

1)

Hal

l Sen

sor m

ust b

e us

ed w

ith a

PH

D S

et P

oint

Mod

ule

whi

ch is

ord

ered

Grip

per w

ith s

enso

r opt

ion

4 or

5 is

ass

embl

ed w

ith th

e in

tern

al c

ompo

nent

s re

quire

d to

use

the

resp

ectiv

e de

vice

s lis

ted

in e

ach

optio

n. T

he s

enso

rs a

nd a

ny re

late

d de

vice

s an

d/or

mou

ntin

g ki

ts m

ust b

e or

dere

d se

para

tely

.

sepa

rate

ly. S

ee S

witc

hes

and

Sens

ors

sect

ion

for i

nfor

mat

ion

and

orde

ring

data

.2) 3)

Prox

imity

sw

itche

s, b

rack

et k

its, a

nd fi

nger

kits

mus

t be

orde

red

sepa

rate

ly.

UN

IQU

E G

RIP

PER

S AR

E AV

AILA

BLE.

PLE

ASE

CON

SULT

PH

D.

See

Switc

hes

and

Sens

ors

sect

ion

for i

nfor

mat

ion.

SET

POIN

T M

OD

ULE

S

PART

NO

. D

ESCR

IPTI

ON

98

00-0

1-03

00

4.5-

24 V

DC,

Sin

k T y

pe O

utpu

t

9800

-01-

0400

4.

5-24

VD

C, S

ourc

e Ty

pe O

utpu

t

SER

IES

JC1S

TP 2

-PO

SITI

ON

MAG

NET

IC S

ENSO

RS

PART

NO

. D

ESCR

IPTI

ON

JC1S

TP-2

PNP

(Sou

rce)

Sol

id S

tate

, 12-

30 V

DC,

2 m

cab

le

JC1S

TP-K

PNP

(Sou

rce)

Sol

id S

tate

, 12-

30 V

DC,

Qui

ck C

onne

ct

Incl

udes

1 s

enso

r and

inst

alla

tion

dire

ctio

ns

SER

IES

JC1S

TP S

ENSO

R

MO

UN

TIN

G K

ITS

MO

DEL

NO

.KI

T PA

RT N

O.

1900

286

944-

05-5

1901

286

944-

06-5

1902

286

944-

07-5

1903

286

944-

08-5

80www.phdinc.com/products/classic • (800) 624-8511

CLASSIC06

DIMENSIONS: SERIES 190 ANGULAR GRIPPERS


6X CLEARANCE HOLEFOR W DOWEL PIN

8X Q THREAD P

B

2X THRU Ø ANDC’BORE FOR Z SHCS

13˚ MIN

JAWPIVOTPOINT

EE MAXGRIPPER MECHANISM

WHEN JAWS AREFULLY OPENED

AA F/2

F

H

CLEARANCE HOLEFOR U DOWEL PIN1X EACH JAW

2X G THREADTHRU EACH JAWY

LE

4˚ MIN

SEE PROXIMITYSWITCH OPTION

PAGE FOR DETAIL

P

BB PORT FITTINGFOR FF I.D. TUBE IS

SUPPLIED WITH UNIT

REF JAW POINTCENTERLINE

DD CC

RK

C

D

REF JAW POINTCENTERLINE

P

O M S

24

1

3

6

5

NOTES:1)*TOLERANCE IS ±.00082) JAW MOVEMENT SHOWS

MINIMUM AMOUNT OF JAW ROTATION. JAWS MAY OPEN 3° OR CLOSE 5° BEYOND-STATED MINIMUM ROTATION.

3) CIRCLED NUMBERS INDICATE POSITION

LETTER MODEL NO. DIM. 19002 19012 19022 19032 B 20.0 26.0 38.0 50.0 C 5.0 6.5 8.0 12.0 D 3.5 5.0 6.5 8.0 E 7.0 9.0 14.0 19.5 F 6.0 8.0 12.0 16.0 G M2.5 x 0.45 M3 x 0.5 M4 x 0.7 M5 x 0.8 H 13.5 17.0 24.0 26.5 K 16.0 19.5 28.0 36.0 L 3.0 3.5 4.5 5.5 M 6.5 8.0 13.0 12.5 O* 14.0 18.0 22.0 28.0 P* 14.0 18.0 28.0 39.0 Q M3 x 0.5 M3 x 0.5 M4 x 0.7 M5 x 0.8 x 4.5 mm x 4.5 mm x 6 mm x 7.5 mm R 30.5 35.0 43.0 51.0 S 2.5 4.0 5.0 6.5 U 2.0 2.5 3.0 4.0 W 2.5 3.0 4.0 5.0 Y 6.0 7.0 9.0 11.0 Z M3 M3 M4 M5 AA 10.0 12.0 17.0 22.9 BB M3 x 0.5 M3 x 0.5 M5 x 0.8 M5 x 0.8 CC 3.5 3.5 4.5 5.0 DD 13.5 14.5 14.5 19.5 EE 4.6 4.6 7.0 10.0 FF 2.5 2.5 3.0 3.0

* TOLERANCE BETWEEN DOWEL PIN HOLES IS ±0.02

This kit provides the mounting components required to utilize one or two Series JC1STP-x Sensors. Using two switches allows sensing of up to four positions throughout the jaw travel (see note 3). Sensors are ordered separately.

NOTE: Sensor ready option 4 must be specified to use these switches.

MOUNTING KIT FOR SERIES JC1STP 2-POSITION TEACHABLE SENSOR

LETTER DIM

MODEL NUMBER

19x6x 19x7x 19x8x 19x9x

in mm in mm in mm in mm

SW1 .770 19.6 .970 24.6 1.480 37.6 1.950 49.5

SW2A .303 7.7 .324 8.2 .350 8.9 .381 9.7

A) SW2 CALCULATED USING NOMINAL HEAD HEIGHT OF STANDARD SHCS

.188[4.8]

(SW2 )

2X Ø .169 [4.3]

SW1 SQ

SERIES JC1STP 2-POSITION MAGNETIC SWITCHESPART NO. DESCRIPTIONJC1STP-2 PNP (Source) Solid State, 12-30 VDC, 2 m cable

JC1STP-K PNP (Source) Solid State, 12-30 VDC, Quick Connect

Includes 1 sensor and installation directions

MATCHING CORDSETPART NO. DESCRIPTION

81284-1-001 M8, 4 Pin, Straight Female Connector, 5 m cable

1) SENSOR PLATE MAY BE ROTATED TO ALLOW THE CABLE TO EXTEND FROM ANY SIDE OF UNIT.

2) SENSOR PLATE MOUNTS TO UNIT USING BOTTOM MOUNTING HOLES. UNIT MAY STILL BE MOUNTED USING THESE HOLES, BUT THE SENSOR PLATE MUST BE SANDWICHED BETWEEN THE UNIT AND CUSTOMER MOUNTING PLATE USING LONGER CUSTOMER SUPPLIED SCREWS.

3) DUE TO SIZE LIMITATIONS, THE SENSOR PLATE FOR THE SMALLEST GRIPPER (8400) HAS ONLY 1 GROOVE AND THEREFORE CAN ACCOMMODATE ONLY ONE SENSOR.

SERIES JC1STP SENSOR MOUNTING KITS

MODEL NO. KIT PART NO.

19002 86944-05-5

19012 86944-06-5

19022 86944-07-5

19032 86944-08-5

81


CLAS

SIC0

6

Air/Oil Tanks and Reservoirs

Accessories

83


CLAS

SIC0

6

AIR/OIL TANKS AND RESERVOIRS

TYPICAL AIR/OIL TANK CIRCUIT

Circuit showstypical air/oilapplication*. Four-wayvalve feeds air alternatelyto tanks which in turnsupply pressurized oil tohydraulic cylinder.Piston speed onhydraulic cylinder can beregulated as desired withPort Controls as shown,or external flow control valves.

*NOTE: PHD recommends the use of an air/oil piston on unitsfor this type of application. The standard piston and sealconfiguration will allow oil to transfer from one tank to the other.

OIL

AIR

OIL

BENEFITS■ Air/Oil Tanks, pressurized by shop air, provide a simple source

of power for low pressure hydraulic cylinders. They may beused as reservoirs and in conjunction with air/oil boosters.

■ Systems of this type also offer the advantage of being selfpurging because the tanks must be mounted vertically at thehighest point of the circuit.

■ Tanks are capable of moderately fast cycle rates withoutfoaming when care is taken to size the tank to the maximumexpected flow rate.

SPECIFICATIONS A20 TANKSBARREL Transparent, Shatterproof FiberglassEND CAPS Aluminum AlloyBAFFLES Included on both capsPORTS NPTMOUNTING Bracket on each capFILL PORT Included on top cap (NPT)

RESERVOIRSSPECIFICATIONS 13459-xx-1 68397-xx-1BARREL Transparent, Shatterproof FiberglassEND CAPS Aluminum Alloy AluminumBAFFLES Included on both caps —PORTS NPT BSP ConnectionMOUNTING Bracket on each capFILL PORT Included on top cap (NPT) BSP

x 4A2O

TO ORDER SPECIFY:Model, Bore Size, and TankLength (“LD” Dimension).

1-3/8BORE SIZE

MODEL

TUBE LENGTH“LD” Dimension in

1" increments(2" Minimum Length)

ORDERING DATA

The reservoir serves as an accumulator to compensate for oilvolume changes due to temperature variation. The reservoir shouldhave 20 psi [1.3 bar] pressure at all times to ensure the systemremains purged.

20 psi

84


CLASSIC06

DIMENSIONS: AIR/OIL TANKS AND RESERVOIRS


AIR/OIL TANKS RESERVOIRS3

1

2 4

N

M

L DIA

2X A DIA THRUG

H

K + LD*J + LD*

E TYP

F TYPC TYP

2X B NPTPORT

D TYP

3

1

2 4

N

M

L DIA

2X A DIA THRUG

H

KJ

E TYP

F TYPC TYP

2X B NPTPORT

D TYP

NOTES:1) PORT POSITION INDICATED BY CIRCLED NUMBERS2) TANKS ARE USED IN AIR/OIL APPLICATIONS AND ARE STROKE OR

VOLUME CHANGE SENSITIVE.3)*SEE TANK SELECTION AND SIZING FOR LD DIMENSION.

TANK TANK AREA MAX. FLOW LETTER DIMENSIONBORE in2 in3/sec A B C D E F G H J K L M N1-1/8 .967 4.90 .219 1/8 .500 1.062 .187 .545 1.250 .625 1.500 1.875 1.500 1.531 .0621-3/8 1.438 7.35 .219 1/4 .500 1.250 .187 .647 1.250 .625 2.000 2.375 1.875 1.906 .062

2 3.091 9.14 .219 1/4 .500 1.312 .187 .647 1.250 .625 2.125 2.500 2.500 2.531 .0623 6.959 18.92 .406 3/8 1.000 2.062 .375 1.115 2.250 1.125 3.250 4.000 3.500 3.531 .125

NOTES:1) PORT POSITION INDICATED BY CIRCLED NUMBERS2) RESERVOIRS ARE USED WITH TANDEM UNITS AND FOR SMALL

VOLUME CHANGES DUE TO TEMPERATURE OR LOSS OR GAIN FACTOR.3) RESERVOIR ASSEMBLY INCLUDES FITTINGS AND TUBING TO CONNECT

TO TANDEM UNITS.

RESERVOIR PART NO. LETTER DIMENSIONIMPERIAL METRIC A B C D E F G H J K L M N PRIMARY USE

13459-01-1 68397-01-1 .219 1/8 NPT [1/8 BSP] .500 1.062 .187 .545 1.250 .625 3.500 3.875 1.500 1.531 .062 3/4" - 1-1/8" BORE SERIES TD CYLINDERS13459-02-1 68397-02-1 .219 1/4 NPT [1/4 BSP] .500 1.312 .187 .647 1.250 .625 5.125 5.500 2.500 2.531 .062 SERIES 8000 TANDEM ROTARY ACTUATORS13459-03-1 68397-03-1 .219 1/8 NPT [1/8 BSP] .500 1.062 .187 .545 1.250 .625 3.500 3.875 1.500 1.531 .062 SERIES 2000-6000 TANDEM ROTARY ACTUATORS13459-04-1 68397-04-1 .219 1/8 NPT [1/8 BSP] .500 1.062 .187 .545 1.250 .625 3.500 3.875 1.500 1.531 062 1-3/8" BORE SERIES TD CYLINDERS

AIR/OIL TANK DIMENSIONS

RESERVOIR TANK ASSEMBLY DIMENSIONS

RESERVOIR TANK ASSEMBLY

85


CLAS

SIC0

6

UNITS OF LENGTH1 inch = 40 lines in 2.54 cm 0.3937011 mil 25.4 µm 0.039371 line 0.635 mm 1.574801 foot = 12 in = 3 hands ft 30.48 cm 0.03280841 yard = 3 feet = 4 spans yd 0.9144 m 1.093611 fathom = 2 yd fath 1.8288 m 0.5468071 rod (perch, pole) rd 5.0292 m 0.1988391 chain = 100 links ch 20.1168 m 0.04970971 furlong = 220 yd fur 0.201168 km 4.970971 mile (Land Mile) mi 1.60934 km 0.621371 nautical mile (intl.) n mi, NM 1.852 km 0.5399571 knot (Knoten) kn 1.852 km/h 0.539957

UNITS OF AREA1 square inch sq in 6.4516 cm2 0.1550001 circular inch 5.0671 cm2 0.1973521 square foot = 144 sq in sq ft 929.03 cm2 1.0764 x 10-4

1 square yard = 9 sq ft sq yd 0.83613 m2 1.195991 acre = 4 roods 4046.8 m2 2.4711 x 10-4

1 square mile = 640 acres sq mi 2.5900 km2 0.38610

UNITS OF VOLUME1 cubic inch cu in 16.387 cm3 0.0610241 cubic foot = 1728 cu in cu ft 28.317 dm3 0.0353151 cubic yard = 27 cu ft cu yd 0.76455 m3 1.307951 register ton = 100 cu ft 2.8317 m3 0.353141 shipping ton 1.13268 m3 0.882861 fluid ounce (GBr) fl oz 0.028413 dm3 35.19501 fluid ounce (USA) fl oz 0.029574 dm3 33.81381 pint = 4 gills (GBr) (liq) pt 0.56826 dm3 1.759751 pint = 4 gills (USA) liq pt 0.47318 dm3 2.113361 dry pint dry pt 0.55061 dm3 1.816161 quart = 2 pints (GBr) (liq) qt 1.13652 dm3 0.879881 quart = 2 pints (USA) liq qt 0.94636 dm3 1.056681 dry quart dry qt 1.10123 dm3 0.9080771 quarter = 64 gal 290.950 dm3 0.00343701 gallon = 2 pottles (GBr) gal 4.54609 dm3 0.2199691 gallon (USA) gal 3.78543 dm3 0.2641701 bushel = 4 pecks (GBr) bu 36.3687 dm3 0.02749621 bushel = 4 pecks (USA) bu 35.2393 dm3 0.02837741 dry barrel 115.628 dm3 0.00864841 petroleum barrel 158.762 dm3 0.0062987

UNITS OF LIGHT1 lambert la 3183.10 cd/m2 x 10 -1

1 foot-lambert ft la 3.42626 cd/m2 0.2918641 candela/sq in cd/sq in 1550.0 cd/m2 6.4516 x 10-4

1 candela/sq ft cd/sq ft 10.7639 cd/m2 0.0929031 footcandle ft cd 10.7639 lx 0.092903

UNITS OF MASS1 grain gr 64.7989 mg 0.01543241 dram dr 1.77185 g 0.5643831 ounce = 16 drams oz 28.3495 g 0.03527391 pound = 16 oz lb 0.453592 kg 2.2046221 quarter = 28 lb 12.7006 kg 0.0787371 hundredweight = 112 lb cwt 50.8024 kg 0.01968411 long hundredweight l cwt 50.8024 kg 0.01968411 short hundredweight sh cwt 45.3592 kg 0.02204621 ton = 1 long ton tn, l tn 1.016047 t 0.9842061 short ton = 2000 lb sh tn 0.907185 t 1.102311

UNITS OF FORCE1 pound-weight lb wt 4.448221 N 0.22480891 pound-force LB, lbf 4.448221 N 0.22480891 poundal pdl 0.138255 N 7.233011 kilogram-force kgf, kgp 9.80665 N 0.10197161 short ton-weight sh tn wt 8.896444 kN 0.11240451 long ton-weight l tn wt 9.964015 kN 0.10036111 ton-force Ton, tonf 9.964015 kN 0.1003611

UNITS OF PRESSURE (FORCE/AREA)1 pound-weight lb wt/sq in 6.8948 kN/m2 0.145038 per square inch ppsi, psi 68.948 mbar 0.01450381 pound-weight lb wt/sq ft 47.880 N/m2 0.0208854 per square foot ppsf, psf 0.47880 mbar 2.088541 kilogram-force/sq in kgf/sq in 1.52003 N/m2 0.6578801 short ton-weight/sq in 13.7895 N/mm2 0.0725521 ton-force/sq in Ton/sq in 15.4443 N/mm2 0.0647491 foot of water ft H2O 0.029891 bar 33.4551 inch of Hg in Hg 1.033864 bar 29.530

UNITS OF WORK AND ENERGY1 foot pound-weight ft lb wt 1.355821 J 0.7375611 foot pound-force ft Lb, ft lbf 1.355817 J 0.7375631 foot-poundal ft pdl 0.0421401 J 23.73041 British Thermal Unit Btu, BTU 1.055056 kJ 0.947817 (intl. steam table) B. th. u. 0.293071 Wh 3.4121411 horse-power hour hph, H Phr 2.6845 MJ 0.37251

h. p. hr. 0.74570 kWh 1.34102

UNITS OF POWER (WORK/TIME)1 foot pound-weight/s ft lb wt/s 1.355821 W 0.7375611 British thermal unit/s Btu/s 1.055056 kW 0.9478171 British thermal unit/h Btu/h 0.293071 W 3.412141 horse-power hp, h. p. 0.74570 kW 1.34102

TEMPERATUREFahrenheit temperature = (Centigrade temperature x 1.8) + 32Centigrade temperature = (Fahrenheit temperature - 32) x 5/9

UNIT & ABBREVIATION SI UNITS CONVERSION* UNIT & ABBREVIATION SI UNITS CONVERSION*

AMERICAN AND BRITISH UNITS OF MEASUREMENT TO SI UNITS

LIMITATION OF WARRANTYAll PHD Products are guaranteed to be free of actual defects in material and workmanship, provided any such defect be reported to

PHD in writing within 1 year of shipment from factory. This warranty is limited to replacing or repairing at the Company's option, F.O.B.the Company’s factory, any part which, upon Company inspection, is found to have a defect in material and/or workmanship. TheCompany in no event shall be liable for indirect or consequential damages arising out of the use of PHD Products. Componentspurchased by the Company from others for inclusion by the Company shall be warranted to the extent set out above and/or to theguaranty or warranty, if any, made by the supplier of said component. APART FROM THE ABOVE EXPRESS WARRANTY, THERE ARE NOWARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

PHD expressly reserves the right to substitute materials in the products described in the catalogs and any supplements thereto:however, this shall not apply to special order products and/or custom products where PHD is advised in writing of specific materialrequirements and agrees in writing to comply with the request for such specific materials.

*For conversion into American or British units, e.g., 5 cm x 0.3937 = 1.9685 in

PDF 1/06 6735

the phd advantage

Competitive advantage in manufacturing is what PHD offers toyou when you specify PHD as your automation componentssupplier. Since 1957, PHD has developed and manufactured awide range of actuators, grippers, and accessories providingsolutions for industrial automation. Our commitment to excellencein product, service, and support can be summarized by ourdriving force. “PHD will provide you what you want, when youwant it.”

PHD and our distributor network are ready to serve you.

Use the PHD website to quickly locate your local distributor. Forimmediate service, call our toll free number.

www.phdinc.com

[email protected]

PHD, Inc.9009 Clubridge DriveP.O. Box 9070Fort Wayne, IN 46899 U.S.A.260-747-6151FAX 260-747-6754

PHD GmbHArnold-Sommerfeld-Ring 252499 Baesweiler, GermanyTEL. +49 (0) 2401 805 230FAX +49 (0) 2401 805 [email protected]

distributorsupportWith partners locatedworldwide, we areequipped to provide you awide variety of value addedsupport and ongoingassistance.

superiordeliveryMost orders ship in1-4 working days.Expedited service isavailable.

customproductsOver 40 years experiencewith rapid responsein designing uniqueproducts at customers’requests.

engineeringsoftwareOnline CAD Configuratorand product sizingsoftware eliminates risk inthe design process andsaves time.

9-21

SENSORS

www.phdinc.com/products/switchesandsensors • (800) 624-8511

CAT-

05

BENEFITS: SERIES 1590 HALL SWITCHES

ORDERING DATA: SERIES 1590 SWITCHES

BENEFITS

■ Hall Effect Switches are suitable for use on most Tom Thumb/PHD products.

■ Liquid Resistant Switches can be used in applications wherecoolant or moisture due to washdown is present (IEC IP67rating). Consult PHD for compatibility with caustic orhazardous liquids.

■ Hall Effect Switches are solid state for long life and eliminationof contact bounce. Constant amplitude output is provided foruse with most digital logic systems.

■ Adjustable mounting allows switches to be located anywherewithin range of piston travel.

■ Several switches may be mounted to control or initiate anysequence function.

■ Suitable for use in plant environments where dirt andcontamination create difficulties for electromechanical andother types of controls.

■ LED indicator provides convenient means for positioning andtroubleshooting circuits.

■ Reverse Voltage Protection is built into these switches tosafeguard against switch failure due to reverse hookup.

The PHD Hall Effect Switch is a solid-state device designedspecifically to provide an input signal to various types ofprogrammable controllers or logic systems. Since the Hall EffectSwitch is solid-state, there are no moving parts to wear out.Because of this, the switch offers an infinite number of trouble-freeoperations. The Hall Effect Switch operates on DC current only, and isa dual output for either current sinking or a current sourcing input.

SPECIFICATIONS 15902-1OPERATING PRINCIPLE Hall EffectACTUATED BY Piston MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) or PNP (Source)OUTPUT CURRENT RATING 200 mA. Max. NPN (Sink) or

100 mA. Max. PNP (Source)OUTPUT VOLTAGE DROP .4 VDC Max. NPN (Sink) or

.5 VDC Max. PNP (Source)SWITCH BURDEN 19 mA. Max.CIRCUIT PROTECTION FALSE PULSE No LOAD SHORT No REVERSE VOLTAGE Yes 400 Hz INTERFERENCE No TRANSIENTS NoSPECIAL FEATURE Groundable Braided ShieldPOWER DISSIPATION 300 milliwatt Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 48°C

CORDSETSTO ORDER SPECIFY:

SENSINGCIRCUITRY DESCRIPTION

0-1 10 WATT DC or AC Reed1-1 3 AMP AC Reed2-1 NPN or PNP DC Hall

Type, Sensing Circuitry,and Design No.

0-11590NOTES:1) Cordsets for quick connect

switches must be orderedseparately.

2) Other cable lengths available.Consult PHD.

TYPEHall, Reed PART NO.

15903-00-12

15903-90-12

15904-00-12

15904-90-12

DESCRIPTION12 ft [3 m] Cordset for ReedSwitch, Straight Connector12 ft [3 m] Cordset for ReedSwitch, 90° Connector12 ft [3 m] Cordset for HallEffect Switch, Straight Connector12 ft [3 m] Cordset for HallEffect Switch, 90° Connnector

9-22


CAT-05

SENSORS

BENEFITS: SERIES 1590 REED SWITCHES

BENEFITS

■ Reed Switches are suitable for use on most Tom Thumb/PHDproducts.

■ Adjustable mounting allows switches to be located anywherewithin range of piston travel.

■ Several switches may be mounted to control or initiate anysequence function.

■ Liquid Resistant Switches can be used in applications wherecoolant or moisture due to washdown is present (IEC IP67rating). Consult PHD for compatibility with caustic orhazardous liquids.

■ No externally moving parts to wear or maintain.

■ Suited for use in plant environments where dirt andcontamination create difficulties for electromechanical andother types of controls.

■ LED provides convenient means for positioning and trouble-shooting switch and circuits.

■ Standard Reed suitable for AC or DC service.

■ 3 Amp Switch provides internal transient protection undernormal conditions (AC only).

The PHD Reed Switch can be operated on either AC or DCcurrent. They are ideal for use as inputs for many types ofsequencers and programmable controllers. In some cases they canbe used to drive some relays or valve solenoids. However, electricaltransients (inrush currents or line spikes) associated with inductiveor capacitive loads can damage and shorten the life of the switch.PHD offers a 3 Amp Reed Switch (AC only) to be used for thesetypes of applications.

The 3 Amp Switch is very similar to the Reed Switch inconstruction. The difference is the inclusion of a triac whichupgrades the contact rating to 3 amps. The 3 Amp Switch also hasbuilt-in protection against electrical transients.

15900-1 10 WATT REED SWITCHSPECIFICATIONS 15900-1OPERATING PRINCIPLE Magnetic ReedACTUATED BY Piston MagnetINPUT VOLTAGE 4.5 to 24 VDC or 110 to 120 VAC*OUTPUT TYPE Contact ClosurePOWER CAPACITY 10 Watt Max.CURRENT RATING 200 mA. SwitchedCONTACT RESISTANCE .100 OhmLED INDICATOR Visible voltage range from

24 to 120 AC or DCENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C

15901-1 3 AMP REED SWITCH (TRIAC)SPECIFICATIONS 15901-1*OPERATING PRINCIPLE Magnetic ReedACTUATED BY Piston MagnetINPUT VOLTAGE 65 to 120 VAC (50/60 Hz)VA MAX. 360CURRENT (BREAK) 3 AmpLEAKAGE 1.7 mA.RESPONSE TIME 1.5 ms On, 0-8.3 ms OffLED INDICATOR Visible throughout voltage rangeENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C

NOTE: All incandescent loads derate switch capacity to 10%due to inrush current. Consult PHD for higher load requirement forthe 3 Amp switch.

VOLTAGE VS. AMPERES DERATING CURVE

VOLT

AGE

- AC

OR D

C

MILLIAMPERES

5057

6780

100

200

200175150125100

755025

00 50 100 150 200

SAFEOPERATION

AREA

133

* CE certification applicable to 4.5 to 24 VDC range only.

* CE certification not applicable to this switch model.

9-23

SENSORS


CAT-

05

DIMENSIONS: SERIES 1590 SWITCHES

HALL EFFECT AND REED SWITCH 1.280[32.5]

.763[19.4]

1.411[35.8]

.500[12.7]

.572[14.5]3° TYP

1/2-20 [12 mm] THREADFOR CORDSETREED SWITCHES USE 3 POLEHALL SWITCHES USE 4 POLE

HALL EFFECT WIRING SCHEMATICSPIN ASSIGNMENT

LED

PIN 2

PIN 4

PIN 3 PIN 1

15902-1 - NPN (SINK)

SWITCHVS

PIN 3

PIN 1

V (OUT)PIN 4

R LOADVSL

15902-1 - PNP (SOURCE)

4.5 TO 24VDC

PIN 3

PIN 1

PIN 2

LOAD

SWITCH


REED WIRING SCHEMATICS15900-1 AC

PIN 2

PIN 3

PIN 1

LOAD

NEUTRAL

LINE

117VAC

15901-1 AC ONLY

LOAD

SWITCH

PIN 2

PIN 3

NEUTRAL

LINE

117VAC

PIN ASSIGNMENT

LED

PIN 2

PIN 1

PIN 3

15900-1 DC NPN (SINK)

PIN 2

PIN 3

PIN 1LOAD

DC

DC

15900-1 DC PNP (SOURCE)

PIN 2

PIN 3

PIN 1LOAD

DC

DC

(Bi-polar LED emits a green light in the Sinking circuit and a red light in the Sourcing circuit.)

9-24


CAT-05

SENSORS

DESCRIPTIONstraight connector90° connectorstraight connector90° connector

TYPE OF SWITCHREEDREEDHALL EFFECTHALL EFFECT

PHD CORDSETPART NO.

15903-00-1215903-90-1215904-00-1215904-90-12

DANIEL WOODHEADPART NO.

70215702197043470429

JOYPART NO.

5000 114-35000 114-65000 115-35000 115-6

LUMBERGPART NO.

RKT 3U-618/12FRKWT 3U-618/12FRKT 4U-674/12F

RKWT 4U-674/12F

NOTE: PHD reserves the right to supply any of the cordsets listed.

4 POLEPIN ASSIGNMENT

1 RED WITH BLACK TRACER 2 RED WITH WHITE TRACER 3 RED 4 GREEN

PIN/WIRE COLOR ASSIGNMENT FOR PHD, DANIEL WOODHEAD, JOY, AND LUMBERG CORDSETS

3 POLEPIN ASSIGNMENT

1 GREEN 2 RED WITH BLACK TRACER 3 RED WITH WHITE TRACER

4

1 3

232

1

3 WIRE 4 WIREFACE VIEW OF PLUGS

ENGINEERING DATA: SERIES 1590 SWITCHES

SWITCH CORDSETS1.141

[29.0] MAX

1.718[43.6]

Ø 1/4 [6.4] CORD

1590x-00-xx STRAIGHTCONNECTOR CORDSET 1.203

[30.5] MAX

LED INDICATOR REF

Ø 1/4 [6.4] CORDCORD WILL EXTEND FROM SWITCH ONTHE LED SIDE OF THE SWITCH

1590x-90-xx90° CONNECTOR CORDSET

Documents

increase productivity Reduce scrap SUPERIOR VALUE …increase productivity ... Standard ports are located in position 5 in the cap. Valves must be customer supplied. See chart at left