Impulse Generator Digital Control & Measuring System€¦ · Generator sphere gap distance State display: Main power connector switching state Ground device switching state Generator

WWW.HIMALAYAL.COM.CN

T: 86 21 6101 6212 Himalayal, always by your side. Copy right © HIMALAYAL

[email protected] All right reserved. Page: 1

Impulse Generator Digital Control

& Measuring System

HCS2000A Digital Control System

Item Qty. Description

6 1 Control system parameter:

Charging voltage:

Setting range 0~100.0kV

Operating space 10.0~100.0kV

Setting deviation ≤±1%

Instability ≤±1%

Setting resolution 0.1kV

Charging time:

Setting rang 20~190s

Setting resolution 1s

Alarm time-delay 2s

Raise voltage times:

Setting rang 1~999

Protection setting:

Over-Current protection Settable

Over-Voltage protection Settable

Trends Charging Protection Selectable

Static Charging Protection Settable

Trigger pulse >15kV, raising time <100ns, polarity is switchable.

Output impulse stability >99%




Main function:

HCS2000A controller can realize manual control, automatic control and

programmed control, main function are like following:

Measuring display:

DC charging voltage

Transformer primary current

Generator sphere gap distance

State display:

Main power connector switching state

Ground device switching state

Generator sphere gaps trigger state

Generator charging voltage polarity state

Control:

Control system can realize manual control, automatic control and programmed

control, each function is independent.

Adopt controllable silicon regulating method, has charging voltage feedback

measuring system

Sparking sphere gap and chopped gap distance is adjustable manually or

automatically, and display on the interface.

Equips time-delay adjustable chopping gap trigger pulse, and generator spark

trigger feedback system

Adopt functions controlled constant current charging methods, charging voltage

stability can reach 0.5%.

Liquid crystal display panel can indicate generator’s charging voltage and

charging process, accuracy is 1%.

Can direct input charging voltage and time from liquid crystal display panel

Equips charging abnormal protection function, the trigger spark pulse can be

generate manually or automatically

Generator working status indication, such as: spontaneous combustion, not

trigger, charging abnormal, charging stable, and so on.

System generator and charging parts ground and ground decontrol

The charging voltage polarity can be changed by press the bottom in the

controller.

The charging process can be controlled manually or automatically

Alarm bell (manual or automatic)

Protection and interlock:

Over-current protection

Over-voltage protection

Abnormal discharge protection

Door open/close interlock

Ground facility interlock

Polarity reversal interlock

Operation indication:




Can supply different operation indication, when system error or disoperation, the

interface will come up relative indication.

Dimension: 750x900x1250mm

Measuring system:

Amplitude measurement: Impulse peak voltmeter (Selectable)

Input range: 100V ～ 1000V（Impulse voltage）

Uncertainty of measurement: <1%

Waveform measurement: TDS3012C digital oscilloscope

Waveform analysis: Grind China industrial control computer

Outer dimension: 750mm*900mm*1250mm

Weight: 110KG

IGMS-1200 Automatic impulse voltage signal analyzing and measuring

system

Item Qty. Description

7 1 1) Amplitude measurement: Impulse peak voltmeter (Selectable)

2) Input range: 100V ～ 400V(Impulse voltage)

3) Uncertainty of measurement: <1%

4) Waveform measurement: TDS3012 digital oscilloscope

5) Max. Sampling rate 1.25GS/s, Bandwidth>100MHz, resolution: 9bit

6) Record length: 10k byte (Meet the requirement of impulse voltage test)

7) Waveform analysis: Grind China industrial control computer

8) Impulse measuring software package:

A. Automatic setting oscilloscope parameter

B. Impulse waveform parameter calculation and display

C. Waveform comparing function

D. Waveform amplification, zoom out, translation

E. Waveform storage and invoking,

F. Waveform Diagram and report

Enclosure:

High performance 100 times dedicated attenuator 2 pcs

A4 Laser printer 1 set

Isolation filter shielding designation

Software operation interface:




Back side of the control console:

Front side of the control console:




Interface of the measuring system:

Setting interface of the measuring system. 2channels available, if need 4 channels, our system

expandable.




Test data will be show on the measuring interface and can be record in the industrial computer.




Triggering distance setting interface:




Impulse testing setting:




Charging parameter setting:

Measuring system:




Oscilloscope Tektronix 3012 is fixed inside of the control console.




Documents

Impulse Generator Digital Control & Measuring System€¦ · Generator sphere gap distance State display: Main power connector switching state Ground device switching state Generator