iMO-LEARN - MDMQuick Start Guide

2

Product Overview

Set Up

3Software Installation

Download & InstalliMO-CONNECT software

from

i3-learning.com/imo-connect/download

Follow the instructions of the iMO-CONNECT installer

USB microcharging port

Bluetooth dongle

USB cable

1

on/off Status

indicators

Insert the Bluetooth USB Dongle into your computer.

20160819_MDM_MANUAL_ENG.indd 1 19/09/16 09:25

4Bluetooth Connection

5iMO-LEARN Cube

Insert the iMO-LEARN MDM in the iMO-LEARN Cubewith the i3-logo facing the yellow sticker

6Recharging

Additional information

Power ON all the iMO-LEARN modules.

The status indicators on the iMO-LEARNmodules will fl ash when connected.

Open the iMO-CONNECT softwarethat will search for

the iMO-LEARN modules near you.

Recharge the iMO-LEARN MDM by the Micro-USB cable.

USB port of any device. USB power adapter5V - max 2A

(not included)

Docking Station for iMO-LEARN(not included)

Through one of the following methods:

The battery is fully charged when the battery status-indicator is green. Charging time: 30 minutes.

Find additional information about iMO-LEARN on the i3-learning website.

i3 TECHNOLOGIES N.V.Kleine Schaluinweg 7, B-3290 DIEST, BELGIUM

© 2016 i3-Technologies N.V.iMO-LEARN, iMO-CONNECT, i3-Technologies and the i3 LOGO are trademarks of i3 GROUP and it’s companies. All other trademarks are the property of their respective owners.

20160819_MDM_MANUAL_ENG.indd 2 19/09/16 09:26