8

Variable speed for a wide range of flow rates 0.8 to 14 l/min.

Multi-purpose screw pump for conventional mortar and premixed materialsSMALL 50

Electric panel with exclusive IMER inverter for top performance

Motor with 3 levels of protection

Easyto clean

APPLICATIONSfor spraying:• Conventional mortar and premixed plasters• Premixed thixotropic products• Waterproofing products• Smoothing and coloured products• Coatings with paints• For filling joints• For strengthening injections

(*) NOTE The pumping distance may vary depending on: the type of material used, pumping height, material consistency, type of pump installed.

Supply - 230V/50Hz Motor power rate kW 1,5 Material flow rate l/min 0,8±14 Maximum pumping distance hose Ø 19 mm* m 15 Maximum pumping distance hose Ø 25 mm* m 25 Hopper capacity l 50 Loading height mm 650 Dimensions width/length/h mm 520/1120/650 Weight kg 69 Sound pressure level dB (A) < 74

Standard Equipment✓ Single-phase 230V/50Hz motor – 1.5 kW

✓ Stainless steel hopper

✓ Arranged for vibrating grid

✓ Rotor and stator D8 1.5 ECO

✓ Electric supply and control panel with inverter

✓ 20 m electric supply cable

✓ Pressure gauge unit

✓ Electric remote control with 16 m cable

✓ Arranged for pneumatic control

✓ Accessory box

✓ Safety devices according to the latest CE standards

On-site applications for SMALL 50

Small 50 complete with optional vibratinggrid and air diaphragm compressor

The automatic run inversion device allows to discharge pressure inside the spray gun and hoses on stopping the machine

9

ACCESSORIES

Diaphragm compressor

Washing sponge

Deflector for painting,smoothing and spacing

Vibrating grid

Spray gun for conventionalmortar and premixed plaster

Material hose Ø 25 mm

Hopper cover

Spray gun for spacing, smoothing, painting and injections with fittings

Air hose Ø 13 mm

Bag crusher roller

Rotor and stator(standard equipment)

Deflector for conventional mortar

Pneumatic wheels

Deflector for premixed materials

Vibrating hopper

Spray gun for fireproofing materials

Rotor and stator for spacing

Easy thermal insulation system

Small 50 can becombined with Spin 15A Cappotto continuous mixerand make a single fine mortar mixing and pumping unit.

Injection kit