1 2 3

Press L for the elipse tool and draw a circle. Hold shift down so that it’s round.

Press ctrl+C to copy and ctrl+shift+V to paste the circle in place. Hold down alt while you squish and stretch the circle.

Open illustrator and create a new document. Change the units to pixels and the width and height to 1000. Raster Effects should be set to 300 ppi.

1 2 3

Change the color to blue by double clicking on the color square in the menu on the left. Press L for the elipse tool, click the artboard and change the width and height to 650px, push ok. Press V to get back to the Selection tool.

Press ctrl+C to copy and ctrl+shift+V to paste the circle in place. Hold down alt while you squish and stretch the circle into an oval.

Open illustrator and create a new document. Change the units to pixels and the width and height to 1000. Raster Effects should be set to 300 ppi.

4 5 6

Press ctrl+shift+V to paste another circle. Hold shift down while you click the oval so that both shapes are selected. Open the pathfinder menu and click the third shape mode option.

Change the color of the shape you just made by double clicking on the color square in the menu on the left. Enter EC1C28 into the box next to # to change the color.

Hover the corner of the oval and click once you see the rotate sign, hold shift while you rotate it 45 degrees. Move the oval so it covers half the circle.

7 8 9

Press shift+C and click the left point on the circle to get rid of the handles. Press A to get the direct selection tool and click the same point. Once it is selected drag the point out to the left.

Press ctrl+shift+V to paste another circle. Press V to get back to your selection tool and use shift to select the cone shape and circle. Open the pathfinder menu and click the third shape mode option.

Press ctrl+shift+V to paste another circle. Hold shift and shrink the circle from the bottom left corner till the circle is w 510 and h 510. Hold shift while you push the up arrow 5 times and the left arrow 5 times. Rotate the circle 45 degrees holding shift.

10 11 12

Select the red shape, then right click on it. Find Arrange-Bring to Front in the menu.

Ta Da! You created the Pepsi LogoWith the new shape still selected, use the eyedropper tool to change it to white by clicking i and then clicking on the white background.