Igniter, BMS & Valve Parts Directory Parts... · 2018. 10. 22. · Igniter, BMS & Valve Parts Directory Phone: (403) 342-4494 Email: [email protected] Web: Contact Us Toll Free:

Igniter, BMS & Valve Parts Directory

Phone: (403) 342-4494 Email: [email protected] Web: www.combustex.com

Contact Us Toll Free: 1-855-226-2582



Combustex is ready to provide you with the spare parts you need to keep your Pilot Pro™ Igniters, Combustex BMS Controllers and Series 100 Valves running smoothly and efficiently. These are the same parts we use to manufacture the original ignition assemblies and BMS Controllers, so you can be sure you are getting replacement units of the highest quality.

Reduce downtime by taking advantage of our pre-packed igniter service kits, available for all of our Pilot Pro™ Igniter models. Complete with all of the most commonly required items after one year of service, these kits ensure that you have the right parts on hand when you need them. Alternatively, use this handy directory to find the individual parts and part numbers required to service all of your Combustex products.

To request a quote, pricing information or to order, contact our offices by phone or email. For igniter service kits, specify the Pilot Pro™ Igniter model and quantity required. For individual parts, indicate the part number, size or length (if applicable) and quantity.

Please note that parts listed for Pilot Pro™ Igniters are the same high quality parts used in the former Can-lite Igniters. To identify the parts you need for your Can-lite Igniter, simply find the corresponding Pilot Pro™ model number.



The Combustex BMS 2000 Series

B149.3 CompliantBurner Management System

1

2 3

4

Item Qty. Description Part No.

1 1 Front Door with Keypad BMS-KB

2 1 Front Circuit Board BMS-03A-5.03L

3 1 Ribbon Cable BMS-RCC

4 1 Back Circuit Board BMS-03B


1 1 Front Door with Keypad BMS-KBW

2 1 Front Circuit Board BMS-03A-5.03L

3 1 Ribbon Cable BMS-RCCW

4 1 Back Circuit Board BMS-03BW

BMS 2000 SERIES

For the BMS-2000

For the BMS-2500



SERIES 100 STAND

ARD

C/I Standard Safety Shutoff Valve

DETAIL B

11

10

20 32

1425

19

12

26

11

10

26

11

28

28

24

2932

END VIEW

B

SECTION A-A

18

3

31

37

8

1513

34

4

21

133 5

23

6

16

21

7

34

22

27

2

17

The Combustex Series 100

Item Qty. Description Part No.1 1 Valve Body 100-001-12 1 Bonnet 100-002-13 1 Spring Case (Standard Model) 100-003-14 1 Cage 100-005-15 1 Valve Plug 100-006-16 1 Valve Stem 100-013-27 1 Diaphragm 100-014-18 1 Valve Spring - 3-15 PSI (Standard Model) 100-015-19 1 Valve Spring - 6-30 PSI (Standard Model) 100-015-2

10 2 Stem Seal Bushing 100-018-111 4 Stem Seal Retainer Ring 100-019-112 1 Diaphragm Guide 100-022-213 1 Diaphragm Spring Plate 100-025-214 1 Shaft Spring Plate 100-026-115 1 Position Indicator Shaft (Standard Model) 100-029-116 1 Indicator Shaft Spring 100-030-117 1 Indicator Cap 100-031-118 1 Spring Adjustment Plate 100-039-1

Item Qty. Description Part No.19 1 Diaphragm Washer 100-024-220 1 Shaft Lock Nut NHJF-0313-CS21 3 Inner & Lower Cage Seal #020 O020-80H22 1 Upper Cage Seal #024 O024-80H23 1 Valve Seat Seal #114 O114-90H24 1 Diaphragm Guide Spacer 100-045-125 1 Diaphragm Guide Outer Seal #114 O114-80H26 3 Stem Packing Seal #203 O20380H27 1 Body Seal #030 O030-80H28 4 Packing Snap Ring SRI-062529 2 Body Bolt BHC-0313-2250-B7M

37 1 Spring Adjustment Jam Nut NHJF-0500-CS31 1 Spring Adjustment Set Screw BSQOF-0500-2000-CS

32 3 Lock Washer WL-0313-CS33 1 Plug Retainer Pin PG-0094-0500-316

34 8 Spring Case Bolt BHC-0250-1000-CS

35 1 Specification Tag 100-042-136 4 Specification Tag Drive Screw PD-0125-0125-CS



SERIES 100 P.O.C.

C/I Proof of Closure Safety Shutoff Valve

The Combustex Series 100

DETAIL B1011

10

28

25

14 21 32

26

20

12

2628

11

11

28

B

SECTION A-A

317

40 38

39

16

30

35

15

2

6

4

22

5133

22

24

23

27

13

7

34

8

18

32

29

END VIEW

Item Qty. Description Part No.1 1 Valve Body 100-001-12 1 Bonnet 100-002-13 1 Spring Case (P.O.C. Model) 100-003-24 1 Cage 100-005-15 1 Valve Plug 100-006-16 1 Valve Stem 100-013-27 1 Diaphragm 100-014-18 1 Inner Valve Spring - 3-15 PSI (P.O.C. Model) 100-016-19 1 Inner Valve Spring - 6-30 PSI (P.O.C. Model) 100-016-2

10 2 Stem Seal Bushing 100-018-111 4 Stem Seal Retainer Ring 100-019-112 1 Diaphragm Guide 100-022-213 1 Diaphragm Spring Plate 100-025-214 1 Shaft Spring Plate 100-026-115 1 POC Switch Actuator Shaft 100-033-116 1 Indicator Shaft Spring 100-030-117 1 Indicator Cap 100-031-118 1 Outer Valve Spring - 3-15 PSI (P.O.C. Model) 100-017-119 1 Outer Valve Spring - 6-30 PSI (P.O.C. Model) 100-017-220 1 Diaphragm Washer 100-024-2

Item Qty. Description Part No.21 1 Shaft Lock Nut NHJF-0313-CS22 3 Inner & Lower Cage Seal #020 O020-80H23 1 Upper Cage Seal #024 O024-80H24 1 Valve Seat Seal #114 O114-90H25 1 Diaphragm Guide Outer Seat Seal #114 O114-80H26 3 Stem Packing Seal #203 O203-80H27 1 Body Seal #030 O030-80H28 3 Packing Snap Ring SRI-062529 2 Body Bolt BHC-0313-2250-B7M

30 1 POC Position Switch 100-032-132 3 Lock Washer WL-0313-CS33 1 Plug Retainer Pin PG-0094-0500-316

34 8 Spring Case Bolt BHC-0250-1000-CS

35 2 POC Position Switch Retainer Screw SR-2x56-0438-304

36 1 Specification Tag 100-042-237 4 Specification Tag Drive Screw PD-0125-0125-CS

38 1 POC Switch Cover Plate 100-004-139 4 POC Switch Cover Bolt BHC-0250-0750-CS

40 1 POC Switch Cover Gasket 100-044-1



The Combustex Pilot Pro™ 900

Ignition System with Pilot Tip and Flame Sensor

● Indicates parts included in service kit.

PILOT PRO

™ 900

11

14

155

1 9 2

3 88

7

13

USER-SUPPLIED 1/2” PILOTPIPE TO BE SCHED. 40, NOT

TO EXCEED 30”

INSTALL SPARK ROD TIP1/8” FROM WALL OF

PILOT HOOD

SEE WIRING DIAGRAM (P. 6)FOR CONNECTIONS TO

IGNITION MODULE

16

6

412


1 1 Cl. 1, Div. I & II Enclosure Base 1031

2 1 Killark HK2D Cap 1032

3 1 Hub 1/2” x 1/2” F/F 1383

4 1 Spark Rod 1384 ●

5 1 1/2” Ground Clamp 1560

6 1 Burn Nozzle 1386

7 1 Serial Number Tag 1404

8 2 1/2” NPT Close Nipple 1015

9 1 Ignition Module (Flame Rod) 1590 ●

10 1 #10-24 x 5/16 Screw (not shown) 1058

11 1 Ignition Wire (SA) 1416 ●

12 1 Electrode Mounting Bracket 1418

13 1 1/2” Electrical Aluminum Seal 1014

14 1 Ground Wire 1399

15 1 Air / Fuel Mixer Orifice 1535

16 1 Air / Fuel Mixer Venturi Body 1534




Pilot Burner Assembly with Ignition & Flame Failure Monitor

13

14

27

8

25

1

12

SECTION VIEW

21

BOTTOM VIEW

7

16

6

15

23

24

42

5

3

or CUSTOM

1, 1.5, 2, 3, 4, 5, 6 (FEET)

DETAIL C

9

11

22

10

19

20

17

1826

DETAIL C

Item Qty. Description Part No.1 1 Top Body 1064

2 1 Upper Gas Valve Assembly 1065 ●

3 1 Lower Gas Valve Assembly 1066 ●

4 1 Igniter Push Button & Body Assembly 1067

5 1 Piezo Igniter Assembly 1068 ●

6 1 Ignition Lead Wire Assembly 2004-(1 through 6) ●

7 1 Pilot Jet 1075

8 1 Pilot Valve 1097-1

9 1 Pilot Gauge 1077 ●

10 1 Output Gauge 1078 ●

11 1 Supply Gauge 1079 ●

12 1 Flame Arrestor 1080 ●

13 1 Bottom Body 1081

14 4 1/4-20 x 1 1/4 Socket Cap Screws 1082

15 1 7/8 x 0.049 SS Tubing 1083-(1 through 6)

16 1 Venturi 1084

17 1 24” Thermocouple 1085 (●)




18 1 Burn Tip 1089 A ●

19 2 Burn Tip Dowel Pin 1090 ●

20 1 Thermocouple Set Screw 1098 ●

21 1 Venturi Set Screw 1101 ●

22 1 1/8” NPT Street Elbow 1094

23 1 Lower Valve Gasket 1095 ●

24 1 Upper Valve Gasket 1096 ●

25 1 Lock Nut 1097-2

26 1 Ceramic Retainer Spring 1098 A ●

27 1 Pilot Valve O-ring 1099

Part number suffix indicates insertion length. E.g. 2004-2 = 2 ft. insertion length.

● Indicates parts included in service kit. (●) Please specify thermocouple size required at time of order.

PILOT PRO

™ 800






1 1 Bottom Body 1007

2 1 Flame Arrestor 1080 ●

3 1 Venturi 1084

4 1 Pilot Jet 1006 ●

5 1 7/8 x 0.049 SS Tubing 1083-(1 through 6)

6 1 Burn Tip 1089A ●

7 1 Ceramic Retainer Spring 1098A ●

8 2 Burn Tip Dowel Pin 1090 ●

9 1 Venturi Set Screw 1101 ●

10 1 Top Body 1005A

11 1 550 Ignition Lead Wire Assembly 2044-(1 through 6) ●

12 4 1/4-20 x 1-1/4 Socket Cap Screws 1082

13 2 1/2” Close Nipple 1015

14 1 550 Ignition Module 1590 ●

15 1 Pilot Valve O-ring 1099

16 1 Cl. 1, Div I & II Enclosure Base 1031

17 1 Killark HK2D Cap 1032

18 2 10-24 x 5/16 Screw 1058

19 1 Serial Number Tag 1404

20 1 1/2” Aluminum Electrical Seal 1014

Part number suffix indicates insertion length. E.g. 2004-2 = 2 ft. insertion length.

1.0002.000

6

8

7

DETAIL A

BOT TOM VIEWSECTION VIEW

DETAIL A

3

15

4

18

14

17

16

19

13

20

13 12

210

1

9

5

11

● Indicates parts included in service kit.

PILOT PRO

™ 550




1 1 Type “K” Thermocouple 1008 ●

2 1 Flange - Instrument Connection 1009

3 1 Flange - 2” NPT Female 1010

3 1 Flange - 3” NPT Female (optional) 1011

4 1 Flange Gasket 1013

5 1 1/2” Aluminum Seal 1014

6 2 1/2” x 2” Aluminum Nipple 1015

7* 1 Ignition Lead Wire Assembly 2005 ●

8 3 Gas Pipe - 3/8” (SS Pipe) 1023

9 1 Conduit - 3/8” (SS Pipe) 1023

10 1 Slide Protector 2002 ●

11 1 Pilot Head Assembly (includes 11A through 11D) 2003 ●

11A 1 Pilot Head 500 1026

11B 1 #8-32 x 1/4” Thermocouple Set Screw - SS 1028

11C 1 Deflector Plate 1027

11D 1 #10-24 x 3/8” Deflector Plate Set Screw - SS 1299

12 1 Spark Plug 1029 ●

13 1 3/8” Elbow Tube Fitting 1030

14 1 Cl. 1, Div. I & II Enclosure Base 1031

15 1 Enclosure Cap 1032

16* 1 Ignition Module 2007 ●

17 4 5/16” Lock Washer - Zinc 1300

18 4 5/16”-18 x 1 Bolt - Zinc 1301

19 4 5/16”-18 Wing Nut - Zinc 1302

20 1 5/8” ID External Snap Ring 1025

21 2 10 - 24 x 5/16 Screw 1058



15

16

21

14

6

18

17

5

13

219

4

3

9

20

10

7

DETAIL C

12

11A

11B

8

1

11C

11D

DETAIL C

● Indicates parts included in service kit. * As of 01/2012 part #s 2005 and 2007 from the Pilot Pro™ 500 Igniter will replace part #s 2006 and 2008 (ignition lead wire assembly and ignition module) from the former Canlite 501 Igniter.

PILOT PRO

™ 500

CONTACT

© 2011 - 2015 Canalta Controls Ltd. All rights reserved. Unauthorized reproduction in whole or in part is prohibited.

Phone: 403.342.4494Email: [email protected]

Fax: 403.346.7110Web: www.combustex.com

6759 65th Ave.Red Deer, AB T4P 1X5

CANADA

Toll Free: 1-855-226-2582

042015

Documents

Igniter, BMS & Valve Parts Directory Parts... · 2018. 10. 22. · Igniter, BMS & Valve Parts Directory Phone: (403) 342-4494 Email: [email protected] Web: Contact Us Toll Free: