IFP VTM42 POWER STEERING PUMPS - Coastal Hydraulics

Values based on using anti-wear type petroleum oil 150 SUS at 100°F and 0 PSI inlet pressure.

* Compact Power Source for Steering Assemblies * Integral Relief and Flow Control * High Efficiency * Balanced Cartridge Design * Quiet Operation

Power Steering Pump Ordering Specifications

POWER STEERING

VTM42 40 15 20 NO K

RING SIZE (SEE SPEC. BELOW)

CONTROLLED FLOWSEE TABLE "B"

K - THREADED KEYED SHAFT

ROTATION

L - COUNTERCLOCKWISE

IFP offers a complete line of economical high performance fixed displacement VTM vane pumps providing flows up to 25 US GPM and pressures to 2000 psi for mobile and marine power steering applications. The integral flow control and relief valve eliminate the need for external valving and combined with the top mounted reservoir, you have a compact power package. Units can be supplied with a manifold assembly to be piped to an external tank or assembled on existing installations. Units are supplied with a threaded shaft and a heavy duty front bearing for gear and pulley drive assemblies.

IFP R

SEE TABLE "A"

RELIEF SETTING

NO-NO TANKST-SMALL TANKBT-BIG TANKMN-MANIFOLD

R - CLOCKWISE

IFP MODEL RING SIZE DISPL. MAXIMUM SPEED - RPM MAXIMUM APPROX.

SERIES (DELIVERY USgpm @ 1200 R/MIN in / r @100 PSI @1500 PSI @2000 PSI PRESSURE WEIGHT

& 100 PSI) (cm / r) 7 BAR (100 BAR) (140 BAR) PSI (BAR) lbs. (kg.)

1 0.21 (3.4) 7000 5000 4250 1.5 0.31 (5.1) 7000 4500 4000 2 0.38 (6.2) 7000 4200 3800 2000 14 (6.4) VTM42 4 0.79 (12.9) 7000 2800 2800 (140)

5 0.96 (15.7) 6000 2600 2300 6 1.18 (19.3) 5000 2500 2000

TABLE A Controlled Flow (at 1600 RPM & 100 PSI)15 -1.5 USgpm (6 L/min)20 -2.0 USgpm (8 L/min)25 -2.5 USgpm (9.5 L/min)30 -3.0 USgpm (11 L/min)35 -3.5 USgpm (13 L/min)40 -4.0 USgpm (15 L/min)45 -4.5 USgpm (17 L/min)50 -5.0 USgpm (19 L/min)55 -5.5 USgpm (21 L/min)60 -6.0 USgpm (23 L/min)65 -6.5 USgpm (25 L/min)70 -7.0 USgpm (26.5 L/min)75 -7.5 USgpm (28 L/min)

05 -500 psi (35 bar)07 -750 psi (52 bar)10 -1000 psi (70 bar)12 -1250 psi (86 bar)15 -1500 psi (100 bar)17 -1750 psi (120 bar)20 -2000 psi (140 bar)

TABLE B Relief Setting

3

3

IFP VTM42POWER STEERING PUMPS

IFP VTM42 POWER STEERING PUMPINSTALLATION/DIMENSIONS

(70 CU.IN.)RESERVOIR

(115 CU.IN.)RESERVOIR

1.50(38.1)

O .62(15.7)

2.62(66.5)

RETURN CONNECTIONMUST BE AIR TIGHT

10.90(276.9)

8.44(214.4)

2.38(60.5)

1.18(30.0)

O .72 (18.3)

�6.00(152.4)

3.00(76.2)

3.85(97.8)

.375-16 U.N.C.-2B TAPTHRU 2 PLACES

O 4.192/4.182(106.48/106.22)

.82

(20.8)

45°

5.12(130.0)

2.00(50.8)

1.56(39.6)

2.71(68.8)

APPROX.2.62

(66.5)

O 2

.250

/2.2

48(5

7.15

/57.

10)

IFP RESERVOIRS ARE PRODUCED WITH A HEAVY GAUGE SIDE WALL THAT ALLOWS 115 CU IN SIZE TO BE MODIFIED TO 70 CU IN SIZE

6.85(174.0)

4.25(108.0)

.28(7.1)

.90(22.9)

2.92(74.2) REF.

1.41(35.8)

.04(1.0)

O .749/.748(19.02/19.00)

.1875x.625 WOODRUFF KEY

.500-20 UNF-2A THD.

3.09(78.5)

.41(10.4)

PRESSURE CONNECTION.750-16 UNF-2B THD..56 MIN. DEEP USESAE HYDRAULIC FITTING ANDO-RING FOR .50 O.D. TUBE

To change cartridge kit rotation slide cam ring over rotor and vanes, making sure that radius edge of vanes is toward cam ring. Insert locating pins through cam ring, position cam ring so that the arrow on cam ring is pointing in the proper direction.

When installing control relief valve install hex head first into the cover bore seating on the spring. Press plug fully in and insert lock pin. ** Failure to follow these steps could cause serious malfunctions and pressures to rise to dangerous levels. **

MODEL CARTRIDGE ROTOR VANE KIT RING PIN PRESSURE SPRING

(10 Vanes) (2 req'd) PLATE

VTM** - 10 923087N 296594N

MODEL CONTROL RELIEF VALVE VALVE S/A SETTING

VTM**-**-02 229613 250PSI

VTM** - 15 923088N 213860N 912139N 296595N 217308N 276396N 289281N VTM** - 20 923089N 296596N VTM** - 40 923090N 296597N VTM** - 50 923091N 213859N 922594N 296598N 154364N 245507N VTM** - 60 923092N 296599N

VTM**-**-03 255515 300PSIVTM**-**-05 233018 500PSIVTM**-**-06 247615 600PSIVTM**-**-07 232794 750PSIVTM**-**-08 397339 850PSIVTM**-**-10 232795 1000PSIVTM**-**-12 232796 1250PSIVTM**-**-15 232797 1500PSIVTM**-**-17 232798 1750PSIVTM**-**-20 232799 2000PSI

Bearing Seal Ring Bearing Ring

VTM-42-ST 70 Cu.in. 923837N 922904N 923951N 222440N 263585N 193732N 148423N 250455N 1606N 172376NVTM-42-BT 115 Cu.in. 923838N

Model Reservoir S/A Kit Seal Kit Body S/A Kit Needle Shaft Retaining Ball #1 Shaft Key Retaining

- Included in seal kit 922904N

109609N Wing Nut 294050N Lock washer308075N Washer

375095N Cover S/A

142521N Gasket

*Reservoir S/A kit

*GasketCover

Sub. Assy.

Pin SpringControl Valve S/A

"O" Ring

Plug

Spring

Pressure Plate

Pin (2 Req'd)

Ring

Rotor

Vane Kits (10 vanes)

"O" Ring

"O" Ring

Body S/A

Needle Bearing

Shaft Seal

Retaining Ring

Ball Bearing

#1 Shaft

Key

Retaining Ring

ORIFICE TOWARDS SPRING

FilterElement

213984N

Screw

1866N Cotter Pin

1586N Washer

212683N Spring

213982N Retainer

229678N Stud

289283N NutTorque to 6-8 lb. ft.

279804N Return Line Baffle

213984N FilterElement

381948N Reinforcing Plate(07 Reservoir only)

315934N Screw (2 req`d)Torque to 7.5-8 lb. ft.

222029N Baffle

Use Either 279804N Baffle orFilter Assembly

MANIFOLD "MA"(280955N)- Straight Tube Assembly- No Bypass

USE .621 I.D. HOSEFASTEN WITHHOSE CLAMP.MUST BE AIR TIGHT.

MANIFOLD "MF" (275276N)- 3/4 NPT Connection- C/W 1/4 NPT Bypass

THIS TANK BYPASS CONN. ISREQUIRED FOR INSTALLATIONSWHICH OPERATE AT PUMP RELIEFVALVE PRESSURES FOR PERIODSEXCEEDING 15 SECONDS.CONNECTION MUST BE MADEBELOW OIL LEVEL IN RESERVOIR.

MANIFOLD "ME" (275276N)-3/4 NPT Connection- No Bypass

IFP MANIFOLDS FOR POWERSTEERING PUMPS

MANIFOLD "MJ"(292457N)-3 4 " SAE Connection- Casting w/Out Bypass Tube

PLUG


* High Performance * Low Cost * Extended Life * Versatile * Compact * Quiet Operation * Balanced Cartridge Design

Single Pump Ordering Specifications

V20 13 R

SINGLE UNITS

MODEL V10, V20

V10 1 - 7 GPM

SHAFT 1 - KEYED 11 - SPLINE

IFP offers a complete line of economical high performance fixed displacement vane pumps providing flows up to 26 US GPM for mobile and industrial applications. Balanced vane design provides quiet operation, high efficiency and long service life for the toughest applications. Units are designed for use with oil or synthetic fire resistent fluid. A large combination of Spline/Keyed Shafts and factory tested cartridges are available for fast, easy conversion and repair. Units are self-priming. However, before starting, fill the pump with system fluid through uppermost port. The housing must be kept full at all times to provide internal lubrication.

IFP 1

RING SIZE

MODEL RING SIZE DISPL. MAXIMUM MAXIMUM TYPICAL TYPICAL SERIES (DELIVERY USgpm @ 1200 R/MIN in / r SPEED PRESSURE DELIVERY (USgpm) INPUT POWER (HP) WEIGHT & 100 PSI) (RPM) (PSI) @max.speed & pressure @max. speed & pressure (lbs.)

1 0.20 4800 2500 3.60 07.0

3

2 0.40 4500 2500 7.30 13.6 3 0.60 4000 2500 9.40 17.8 V10 4 0.80 3400 2500 10.9 20.4 (10 - 15) 5 1.00 3200 2500 12.8 22.8 6 1.19 3000 2500 14.6 26.0 7 1.39 2800 2500 16.0 28.0

6 1.19 3400 2500 16.1 29.0 7 1.39 3000 2500 16.7 29.5 8 1.62 2800 2500 17.7 32.5 V20 9 1.80 2800 2500 19.8 35.5 (16 - 18) 11 2.22 2500 2500 22.9 37.5 12 2.38 2400 2500 23.0 38.5 13 2.59 2400 2500 25.9 42.0

V20, V210, V230 (6 - 13 GPM)

A2.1

IFP SINGLE VANE PUMPSV10/V20 - V210/V230

F

OPTIONAL COVERS* NO CODE STANDARD UNITF- FLOW CONTROLP- PRIORITY CONTROL

(6D)

F/P COVERS

- RELIEF PRESSURE- CONTROLLED FLOW

ROTATION

L - C.C.W. R - C.W.

(NPT)

PORTSNPTSAEBSP

38 - SPLINE

V210V230

CLASSIC V210, V230

OPTIONAL

(OTHER SHAFTS AVAILABLE)

C:\Program Files\ACAD2000\CATELOG\NDcatalogue\pictures\V10&V20.bmp

DELIVERY @ 1200 RPM & 100 PSI A B C

1 GPM 4.55 3.62 2.65 2 GPM 4.55 3.62 2.65 3 GPM 4.55 3.62 2.65 4 GPM 4.80 3.87 2.90 5 GPM 4.85 3.87 2.90 6 GPM 5.00 4.07 3.10 7 GPM 5.00 4.07 3.10

DIMENSION

DIMENSION (inches)V10 seriesOptional Shafts

Weight 10 - 15 lbsPressure: 1/2" NPTSuction: 1" NPTOptional BSPT/SAE Ports available.

Foot Bracket availablePart # - IFB - A (see page J 1.1)

FLOW CONTROL/PRIORITY COVERS AVAILABLE.(SEE Page A2.5)

1.251.97

.625.624

D.

.50020 UNF2A THD.

NO 3 KEYED SHAFT

.581.25

.623.622

D.

NO.11 SPLINEDSHAFT 9 TOOTH

3.248D.

SUCTIONPRESSURE

.581.25

.7485.7452

D.


.58

1.63

.873.872

D.


.750.749

D.

3.94

A

BC 1.75.97

.187 SQ. KEY-1.00 LONG

NO.1KEYED SHAFT

4.187

IFP V10 SINGLE VANE PUMPINSTALLATION DIMENSION

SAE "A" FLANGE(REF.)

V20 seriesOptional Shafts

Foot Bracket availablePart # - IFB - A (see page J 1.1)

FLOW CONTROL/PRIORITY COVERS AVAILABLE.(SEE Page A2.5)

1.062.78

.625.624

D.

.875-18#2 THD.

NO 3 KEYED SHAFT

.942.94

.7485.7453

D.


.58

1.25

.7485.7452

D.


.58

1.63

.873.872

D.


4.187

IFP V20/V210/V230 SINGLE VANE PUMPINSTALLATION DIMENSION

SAE "A" FLANGE(REF.)

PRESSURE SUCTION

3.248

.749

.1857 SQ.X 1.62LONG KEY

NO.1 KEYED SHAFT

4.79

C

B

A 2.66

DELIVERY @ 1200 RPM & 100 PSI A B C

6 4.93 4.02 2.80

DIMENSION

DIMENSION (inches)

Weight 16 - 18 lbsPressure: 3/4" NPTSuction: (V20) 1-1/4" NPT, (V210) 1" NPTOptional BSPT/SAE Ports available.

7 5.18 4.27 3.05 8 5.18 4.27 3.05 9 5.18 4.27 3.05 11 5.38 4.47 3.25 12 5.52 4.61 3.39 13 5.52 4.61 3.39

D

4.187

.375-16 N.C. NO. 2 THD

.50 DEEP-6 HOLESEQUALLY SPACED FOR MOUNTING

2.248

V20/V210

V230

D

IFP V10/V20/V210/V230 VANE PUMPSERVICE PARTS INFORMATION

STANDARD COVER

OPTIONAL "F" COVER

SEE Page A2.5OPTIONAL "P" COVER

SEE Page A2.6

"O" RING

SPRING PRESSURE PLATE

* ROTOR* RING

"O" RING

BODY

SEAL

SNAP RING

BEARING

SNAP RING

SHAFT

* VANE

PIN

KEY

PUMP SE C. KIT ROTOR VANES RING SEAL SEAL KIT BEARING PR. PL. SPRING BODY COVER SHAFT NO. V10...1 923471N 317681N 923499N 317674N 263585N 923548N 148423N 374343N 345262N 352699N 372863N SHAFT 1 NO.374338N ...2 923470N 317675N SHAFT 3 NO.374340N ...3 923496N 317676N SHAFT 4 NO.378959N ...4 923469N 351247N 923500N 317677N SHAFT 6 NO.382250N ...5 923468N 317678N SHAFT 11 NO.374339N ...6 923497N 357268N 923501N 355641N ...7 923498N 331813N

V20...5 924076N 358328N 923485N 388284N 229235N 922733N 098574N 359287N 28422N ...6 923480N 328150N ...7 923481N 358330N 923493N 328152N ...8 923483N 331791N ...9 923484N 331789N ...10 923620N 358332N 923478N 374309N ...11 923482N 328156N ...12 923486N 358334N 923479N 331806N ...13 923487N 331807N

- All cartridge assemblies are factory tested prior to shipping -

Rear Cover Bolt Torque

Assemble the ring using the locating pins for alignment making sure the arrow on the perimeter point's in the proper direction of rotation. Install the rotor on shaft and insert vanes in the rotor slots. Be certain the radius edges of the vanes are towards the cam ring.

INCLUDED IN SEAL KIT* INCLUDED IN CARTRIDGE KIT

V10 40 FT./LBSV20 80 FT./LBS

FLOW CONTROL/PRIORITY COVER AVAILABLE

DOUBLE BEARING DESIGN

INLET 1" NPT

3/4" DIA KEY SHAFT

V210 "SAE A" MOUNTINGV230 "FACE" MOUNTING

OPTIONAL V210/V230 DOUBLE BEARING FRONT COVER

VITON388205N

VITON919772N

VITON279499N

VITON919805N

(V210)(V230)

V20SHAFT 1 NO.280372NSHAFT 3 NO.280504NSHAFT 6 NO.297330NSHAFT 11 NO.280515NSHAFT 15 NO.294922NSHAFT 38 NO.328096N

V210/V230SHAFT 1 NO.280210N

313657N

V210280210N

V230280230N

V20280689N

SHAFT 38 NO. 387481NSHAFT 12 NO. 375480N

FLOW RATE ORIFICE RELIEF VALVE NUMBER / PRESSURE SETTING 2 -2 USgpm A- 250psi

When installing control relief valve, install relief assembly in cover bore, install spring seating on hex head end of relief assembly, compress spring and install cover plug. *** WARNING *** Failure to follow these steps could cause serious malfunction and pressures to rise to dangerous levels.

3 -3 USgpm B- 500psi 4 -4 USgpm C- 750psi 5 -5 USgpm D- 1000psi 6 -6 USgpm E- 1250psi 7 -7 USgpm F- 1500psi 8 -8 USgpm G- 1750psi

FLOW RATE ORIFICE RELIEF VALVE NUMBER / PRESSURE SETTING 2 -2 USgpm A- 250psi


3 -3 USgpm B- 500psi 4 -4 USgpm C- 750psi 5 -5 USgpm D- 1000psi 6 -6 USgpm E- 1250psi 7 -7 USgpm F- 1500psi 8 -8 USgpm G- 1750psi

TANK PORT.750- 16 UN-28 THDOR .500 NPT THD

OUTLET PORT.750-16 UN-28 THD

IFP

PART NUMBERIFP 379543N

3.84

TANK PORT.50 NPT

IFP


OUTLET PORT.750-16 UNF -2B STR. THDSAE O-RING BOSS CONNECTION

2.80

IFP FLOW CONTROL/RELIEF COVERV10/V20F

4.212.42

4.38

4.88

H- 2000psi J- 2250psi K- 2500psi

229613N233018N232794N232795N232796N232797N232798N

232799N233019N233020N

H- 2000psi J- 2250psi K- 2500psi

229613N233018N232794N232795N232796N232797N232798N

232799N233019N233020N

BODYSpring

Poppet

ShimPlug

BODYSpring

Poppet

ShimPlug

BODYSPRINGPOPPET

700283N700285N700284N

SHIM 700890N

BODYSPRINGPOPPET

700283N700285N700284N

SHIM 700890N

FLOW RATE ORIFICE RELIEF VALVE SETTING 2 -2 USgpm A- 250psi H- 2000psi 3 -3 USgpm B- 500psi J- 2250psi 4 -4 USgpm C- 750psi K- 2500psi 5 -5 USgpm D- 1000psi 6 -6 USgpm E- 1250psi 7 -7 USgpm F- 1500psi

G- 1750psi

FLOW RATE ORIFICE RELIEF VALVE SETTING 2 -2 USgpm A- 250psi H- 2000psi 3 -3 USgpm B- 500psi J- 2250psi 4 -4 USgpm C- 750psi K- 2500psi 5 -5 USgpm D- 1000psi 6 -6 USgpm E- 1250psi 7 -7 USgpm F- 1500psi 8 -8 USgpm G- 1750psi


PART NUMBER IFP 308121N

IFP PRIORITY COVERV10P/V20P

Secondary outlet port.750-16 UNF-2B Thd.SAE O-ring Boss Connection

2.19

4.25

.6251.187

primary outlet port.5625-18 UNF-2B Thd.SAE O-ring connection

Tank port for pressure reliefof primary outlet port.5625-18 UNF-2B Thd.SAE O-ring Boss connection

2.44

4.88

.62

.62

primary outlet port.750-16 UNF-2B STR Thd.SAE O-ring connection

Tank port for pressure reliefof primary outlet port.750-16 UNF-2B STR. Thd.SAE O-ring Boss connection


A3.1

IFP V2010/V2020DOUBLE VANE PUMPS

FRONT SECTION BACK SECTION Model Delivery Displ. Max. Max. Typical Typical Delivery Displ. Max. Max. Typical Typical Weight

Series USgpm @ cu.in./ rpm. psi. delivery input HP @ USgpm @ cu.in./ rpm psi delivery input HP @ lbs. 1200 rpm rev. USgpm @ max.speed 1200 rpm rev. USgpm @ max.speed 100 psi max.speed & pressure 100 psi max.speed & pressure & pressure & pressure 6 1.19 3000 2500 14.5 24.5 1 .20 3000 2500 2 4.5 7 1.39 3000 2500 16.5 30 2 .40 3000 2500 4.7 9 8 1.62 2800 2500 17.5 32.5 3 .60 3000 2500 7 13.4 V2010 9 1.81 2800 2500 20 36 4 .80 3000 2500 9.5 18 30 11 2.22 2500 2500 23 37.5 5 1.00 3000 2500 12 21.5 12 2.38 2400 2500 23 36 6 1.19 3000 2500 14.5 24.5 13 2.59 2400 2500 26 39 7 1.39 2800 2500 16 24

6 1.19 3000 2500 14.5 24.5 6 1.19 3000 2500 14.5 24.5 7 1.39 3000 2500 16.5 30 7 1.39 3000 2500 16.5 30 8 1.62 2800 2500 17.5 32.5 8 1.62 2800 2500 17.5 32.5 V2020 9 1.81 2800 2500 20 36 9 1.81 2800 2500 20 36 35 11 2.22 2500 2500 23 37.5 11 2.22 2500 2500 23 37.5 12 2.38 2400 2500 23 36 13 2.59 2400 2500 26 39


* High Performance * Low Cost * Extended Life * Versatile * Compact * Quiet Operation * Hydraulic Balance

Double Pump Ordering Specifications

DOUBLE UNITSSAE "B" MOUNT

IFP V2010 * 13 5 11 R

MODEL V2010/V2020

RING SIZE RING SIZE

SHAFT 1 - KEYED 11 - SPLINED

ROTATION R - C.W. L - C.C.W.

IFP offers a complete line of economical, high performance fixed displacement double vane pumps that provide flows up to 26/23 US GPM per section for mobile and industrial applications. Balanced vane design provides quiet operation, high efficiency and long service life for the toughest applications. Units are designed for use with oil or synthetic fire-resistant fluid. A large combination of factory tested cartridges are available for fast, easy conversion and repairs.

F

P

FRONT SECTION BACK SECTION

OPTIONAL COVERS* NO CODE STANDARD UNITF- FLOW CONTROLP- PRIORITY CONTROL

F/P COVERS

- RELIEF PRESSURE- CONTROLLED FLOW

OPTIONAL

(6H)

C:\wliu\V2010&V2020.bmp

IFP V2010 DOUBLE VANE PUMPINSTALLATION DIMENSIONS

5.75

SAE "B" FLANGE(REF.)

1.62.464

.873 D.872

NO.11 SPLINED SHAFT13 TEETH

3.998D

NO.1 OUTLET PORT1.0625-12 UN-2B THD.

NO.2 OUTLET PORT.750-16 UNF-2B THD.

INLET PORT1.50 FLANGE

NO.1 KEYED SHAFT

.875 .874

D

.1875 SQ. x 1.25LONG KEY

5

2.31E 1.06D

CB

A

RATED DELIVERY GPM@ 1200 RPM & 100 PSI

Shaft End Cover End A B C D E

7, 8 or 9 1,2 or 3 8.39 7.45 4.46 2.99 3.40

DIMENSIONS

DIMENSIONS

7, 8 or 9 4 or 5 8.64 7.70 4.46 3.24 3.40 7, 8 or 9 6 or 7 8.84 7.90 4.46 3.44 3.40 11 1, 2 or 3 8.59 7.65 4.65 2.99 3.59 11 4 or 5 8.84 7.90 4.65 3.24 3.59 11 6 or 7 9.04 8.10 4.65 3.44 3.59 12 or 13 1, 2 or 3 8.73 7.79 4.79 2.99 3.73 12 or 13 4 or 5 8.97 8.03 4.79 3.24 3.73 12 or 13 6 or 7 8.23 8.03 4.79 3.44 3.73 Weight 30 lbs.

Foot Bracket AvailablePart Nbr - IFB-B(see page J 1.1)

DIMENSIONS (inches) V2010 SeriesOptional Shaft

IFP V2020 DOUBLE VANE PUMPINSTALLATION DIMENSIONS

3.998D

NO.1 OUTLET "S" PORT1.062-12 UN-2B THD.

NO.2 OUTLET "S" PORT1.062 12 UN-2B THD.

INLET PORT2.00 FLANGE

NO.1 KEYED SHAFT

.875 .874

D

.1875 SQ. x 1.25LONG KEY

5.14

2.31E 1.06D

CB

A

Foot Bracket AvailablePart Nbr - IFB-B(see page J 1.1)

DIMENSIONS (inches) V2020 SeriesOptional Shaft

RATED DELIVERY GPM@ 1200 RPM & 100 PSI

Shaft End Cover End A B C D E

7, 8 or 9 6 8.41 7.39 4.49 2.90 3.43

DIMENSIONS

DIMENSIONS

7, 8 or 9 7, 8 or 9 8.66 7.64 4.49 3.15 3.43 11 6 8.61 7.59 4.69 2.90 3.63 11 7, 8 or 9 8.86 7.84 4.69 3.15 3.63 11 11 9.05 8.03 4.69 3.35 3.63 12 or 13 6 8.75 7.73 4.82 2.90 3.76 12 or 13 7, 8 or 9 8.99 7.97 4.82 3.15 3.76 12 or 13 11 9.19 8.17 4.82 3.35 3.76 Weight 35 lbs.

5.75

SAE "B" FLANGE(REF.)

1.62.464

.873 D.872

NO.11 SPLINED SHAFT13 TEETH

IFP V2010 DOUBLE VANE PUMPSERVICE PARTS INFORMATION

* Ring

* Rotor

* Vane kit

"O" Ring

* Pressure plate

"O" Ring

Outlet Body

Shaft seal

Snap ring

Ret. Ring

Front Kit

Wave Waher Bearing

Shaft

"O" Ring

Body "O" Ring* Ring

* Vane kit

* Rotor

Back Kit

Pressure plate S/A

Spring

"O" RingStandard Cover

PUMP SE C. KIT ROTOR VANE RING PR. PL. C. KIT ROTOR VANE RING PR. PL.

7 923494N 358335N 923493N 328152N

FRONT SECTION BACK SECTION V2010 85 LBS/FT. 45 LBS/FT.

- All Cartridge assemblies are factory tested before shipping -

Bolt Torques

Reposition the ring 90° from its original position using the locating pins for alignment, making sure that the arrow on the perimeter points in the proper direction of rotation. Install the rotor on the shaft and insert vanes in the rotor slots. Be certain that the radius edges of the vanes are towards the cam ring.

FRONT FRONT FRONT FRONT FRONT BACK BACK BACK BACK BACK

8 923495N 331791N 9 923462N 331789N V2010 11 923475N 358336N 923478N 328156N 12 923476N 358337N 923479N 331806N 13 923477N 331807N 7 923498N 331813N

PUMP SE SEAL KIT SEAL BEARING BODY SHAFT NO.

V2010 923577N 229236N 82938N 357292N SHAFT 1. NO. 351249N SHAFT 11. NO. 321215N

* Included in Cartridge kits Included in Seal kitsOPTIONAL COVERS:

F COVER (SEE Page A3.6)

P COVER (SEE Page A3.6)

6 923474N 358339N 923485N 328150N 358347N 1 923471N 317681N 923499N 317674N 373795N

6 923497N 357286N 923501N 355641N

2 923470N 317675N 3 923496N 317676N 4 923469N 351247N 923500N 317677N 5 923468N 317678N

OUTLET BODY315120N

IFP V2020 DOUBLE VANE PUMPSERVICE PARTS INFORMATION

PUMP SE C. KIT ROTOR VANES RING PR. PL. C. KIT ROTOR VANES RING PR. PL.

7 923494N 358335N 923493N 328152N

FRONT SECTION BACK SECTION V2020 81 LBS/FT.


Bolt Torques

Reposition the ring 90° from its original position using the locating pins for alignment, making sure that the arrow on the perimeter points in the proper direction of rotation. Install the rotor on the shaft and insert vanes in the rotor slots. Be certain that the radius edges of the vanes are towards the cam ring.

FRONT FRONT FRONT FRONT FRONT BACK BACK BACK BACK BACK

8 923495N 331791N 9 923462N 331789N 11 923475N 358336N 923478N 328156N 12 923476N 358337N 923479N 331806N 13 923477N 331807N

PUMP SE SEAL KIT SEAL BEARING BODY SHAFT NO. V2020 923174N 229236N 82938N 308681N SHAFT 1. NO. 308686N SHAFT 11. NO. 308926N

INCLUDED IN SEAL KIT* INCLUDED IN CARTRIDGE KIT

11 923482N 358332N 923478N 328156N 9 923484N 331789N 8 923483N 331791N 7 923481N 358330N 923493N 328152N 6 923480N 358328N 923485N 328150N 358347N 6 923474N 358339N 923485N 328150N 358347N

V2020

OUTLET BODY

315120N

* Ring

* Rotor

* Vane kit

"O" Ring

* Pressure plate

"O" Ring

Outlet Body

Shaft seal

Snap ring

Ret. Ring

Front Kit

Wave Waher Bearing

Shaft

"O" RingBody "O" Ring* Ring

* Vane kit

* Rotor

Back Kit

Pressure plate S/A

Wave Waher "O" RingStandard Cover

* Included in Cartridge kits Included in Seal kits

OPTIONAL COVERS:

F COVER (SEE Page A3.6)

P COVER (SEE Page A3.6)

Bushing

IFP V2010 DOUBLE VANE PUMPFLOW CONTROL/PRIORITY CONTROL COVERS



2.19

4.25

.625

1.187

primary outlet port.5625-18 UNF-2B Thd.SAE O-ring connection

Tank port for pressure reliefof primary outlet port.5625-18 UNF-2B Thd.SAE O-ring Boss connection

FLOW RATE ORIFICE RELIEF VALVE NUMBER / PRESSURE SETTING 2 -2 USgpm A- 250psi 3 -3 USgpm B- 500psi 4 -4 USgpm C- 750psi 5 -5 USgpm D- 1000psi 6 -6 USgpm E- 1250psi 7 -7 USgpm F- 1500psi 8 -8 USgpm G- 1750psi

H- 2000psi J- 2250psi K- 2500psi

229613N233018N232794N232795N232796N232797N232798N

232799N233019N233020N




H- 2000psi J- 2250psi K- 2500psi

229613N233018N232794N232795N232796N232797N232798N

232799N233019N233020N

TANK PORT.750- 16 UN-28 THDOR .500 NPT THD

3.84

2.42

OUTLET PORT.750-16 UN-28 THD

IFP

4.21BODY

SpringPoppet

ShimPlug

IFP V2020 DOUBLE VANE PUMPFLOW CONTROL/PRIORITY CONTROL COVERS


TANK PORT.50 NPT

2.80

4.88

2.44

4.88

.62.62

primary outlet port.750-16 UNF-2B STR Thd.SAE O-ring connection

Tank port for pressure reliefof primary outlet port.750-16 UNF-2B STR. Thd.SAE O-ring Boss connection




H- 2000psi J- 2250psi K- 2500psi

229613N233018N232794N232795N232796N232797N232798N

232799N233019N233020N


H- 2000psi J- 2250psi K- 2500psi

229613N233018N232794N232795N232796N232797N232798N

232799N233019N233020N

PART NUMBER IFP 308121N

IFP

OUTLET PORT.750-16 UNF -2B STR. THDSAE O-RING BOSS CONNECTION

4.38BODY

SpringPoppet

ShimPlug

IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS

Pump Displacement R.P.M. 100 P.S.I. 1500 P.S.I. 2500 P.S.I. Model (in /rev.) (INPUT H.P.) (INPUT H.P.) (INPUT H.P.)

5(1.10)

8(1.67)

11(2.22)

12(2.47)

14(2.78)

1200 5.0 (0.4) 4.5 (5.0) 4.2 (6.0) 1500 6.9 (1.0) 6.4 (7.0) 6.0 (8.0) 1800 8.5 (1.5) 7.7 (8.5) 7.5 (12.0) 1200 8.0 (1.0) 7.4 (8.0) 7.1 (14.0) 1500 10.5 (1.2) 9.5 (10.5) 9.1 (17.0) 1800 13.7 (1.7) 11.9 (12.0) 11.2 (20.5) 1200 11.0 (1.2) 10.2 (11.0) 9.9 (16.0) 1500 14.2 (1.5) 13.5 (14.5) 12.5 (23.0) 1800 17.1 (2.8) 16.5 (18.0) 15.5 (28.5) 1200 12.0 (1.3) 11.6 (12.5) 11.2 (19.0) 1500 15.0 (1.5) 14.8 (15.5) 14.0 (25.0) 1800 18.6 (3.0) 17.8 (19.0) 16.4 (30.0) 1200 14.0 (1.5) 12.2 (13.5) 11.2 (23.0) 1500 17.5 (3.0) 16.1 (17.0) 14.5 (29.0) 1800 21.0 (3.5) 18.4 (20.0) 18.0 (34.0)

20 V

12(2.47)

14(2.78)

17(3.39)

21(4.13)

1200 12.0 (1.0) 10.8 (12.0) 10.2(21.0) 1500 15.0 (1.5) 13.8 (14.5) 13.5 (25.0) 1800 18.0 (2.5) 16.4 (17.0) 16.4(30.0) 1200 14.0 (2.0) 12.4 (13.5) 11.5 (23.0) 1500 17.5 (2.0) 16.8 (17.0) 14.8 (29.0) 1800 21.0 (3.0) 18.6 (20.0) 18.4 (34.5) 1200 17.0 (2.0) 15.5 (16.5) 15.0 (28.0) 1500 21.0 (2.0) 20.0 (20.0) 18.3 (34.0) 1800 25.5 (3.0) 23.2 (24.0) 22.8 (40.0) 1200 21.0 (2.0) 19.5 (20.0) 18.5 (33.0) 1500 26.0 (3.6) 24.0 (24.5) 23.5 (42.0) 1800 31.5 (3.8) 29.2 (29.0) 28.0 (46.0)

25 V

25(4.94)

30(5.91)

35(6.83)

38(7.37)

1200 25.0 (2.5) 22.5 (23.0) 21.0 (41.0) 1500 31.0 (3.0) 29.0 (30.0) 27.0 (50.0) 1800 37.8 (4.0) 35.5 (36.0) 33.0 (61.0) 1200 30.0 (4.0) 28.0 (28.5) 25.5 (49.0) 1500 37.0 (5.0) 35.0 (35.5) 33.0 (61.0) 1800 44.8 (6.0) 42.0 (43.0) 40.5 (73.0) 1200 35.0 (4.0) 32.0 (33.0) 30.5 (54.0) 1500 43.0 (5.0) 41.0 (42.5) 39.0 (68.0) 1800 52.0 (6.5) 50.0 (51.5) 47.5 (82.0) 1200 38.0 (4.5) 35.0 (35.5) 32.0 (58.0) 1500 46.5(6.0) 43.0 (44.0) 41.5 (73.0) 1800 56.5 (7.0) 53.5 (55.0) 51.0 (88.0)

35 V

42(8.41)

50(9.85)

60(11.75)

1200 42.0 (4.0) 36.0 (38.0) 33.0 (68.0) 1500 53.0 (6.0) 48.0 (49.0) 44.0 (79.0) 1800 64.0 (7.0) 59.0 (60.0) 55.0 (101.0) 1200 50.0 (4.0) 45.0 (46.0) 42.5 (75.0) 1500 62.0 (8.0) 57.5 (59.0) 55.0 (97.0) 1800 74.0 (8.0) 69.0 (71.0) 67.0 (117.0) 1200 60.0 (6.0) 55.0 (57.0) 52.0 (93.0) 1500 75.0 (7.0) 69.0 (72.0) 66.0 (116.0) 1800 91.0 (9.0) 86.0 (88.0) 82.0 (139.0)

45 V

Performance Data - Typical Flows at 120° F, 10 W oil (128SUS), 0 PSI inlet

Flow in Gallons Per Minute (GPM).

3

MAX. PSI2300

MAX. PSI2000

21(4.13)

1200 21.0 (2.0) 19.5 (20.0) 18.5 (31.0) 1500 26.0 (3.6) 24.0 (24.5) 23.5 (41.0) 1800 31.5 (3.8) 29.2 (29.0) 28.0 (45.0)

A4.3

IFP HIGH PERFORMANCE MOBILE SINGLE INTRA-VANE PUMPS


* 3000 PSI Maximum Operating Pressure * High Operating Speeds * Pressure Balanced Brass Flex Plates * Versatile * Compact * Contaminant Tolerant

Single Pump Ordering Specifications

35 38 R

SINGLE UNITS

MODEL 25VQ/30VQ/35VQ/45VQ SHAFT 1 - KEYED 11 - SPLINE

ROTATION

L - C.C.W.

IFP offers a complete line of high performance single intra-vane pumps for mobile equipment. A large number of SAE mounts, shafts, and displacements, along with their high pressure and speed capabilities, provide the combination best suited for mobile applications. The cartridge assemblies are designed with two flex plates in hydrostatic balance which seal against the rotor to provide optimimum running clearances for minimum internal leakage and friction. The bronze face of the flex plates provides excellent wear for cold-start conditions. The availability of our factory tested cartridges offers fast and efficient field serviceability, and the replacement pump cartridge reduces down time to increase productivity. These units can operate on a wide variety of fluids.Contact the local representative with your requirements.

IFP 11

RING SIZE

R - C.W.

MODEL FLOW IN GPM DISPL. MAXIMUM MAXIMUM TYPICAL TYPICAL SERIES @ 1200 RPM & 100 PSI in / r SPEED PRESSURE DELIVERY GPM @ INPUT POWER (HP)@ WEIGHT (RPM) (PSI) max.speed & pressure max. speed & pressure (lbs.)

5 1.10 2700 3000 11.0 24.0

3

8 1.67 2700 3000 17.0 35.0 20VQ 11 2.22 2700 3000 23.0 47.5 26 12 2.41 2700 2300 22.5 38.0 14 2.80 2700 2000 30.0 39.0

MOBILE SERIES

SAE MOUNT

VQ

12 2.45 2700 3000 23.0 55.0

14 2.77 2700 3000 27.0 62.5

25VQ 17 3.37 2500 3000 31.0 69.5 32 19 3.72 2500 3000 35.0 76.0

25 4.98 2500 3000 45.0 101.0

30 5.96 2500 3000 55.0 117.5

35VQ 35 6.88 2400 3000 60.0 132.0 50

38 7.42 2400 3000 65.0 140.0

42 8.46 2200 2500 66.5 122.5

45VQ 50 9.90 2200 2500 79.0 141.00 75

57 11.20 2200 2500 92.0 160.00

24 4.70 2700 3000 23.0 55.0 30VQ 28 5.50 2500 3000 31.0 69.5 36

21 4.12 2500 3000 38.0 83.0

21 4.12 2500 3000 38.0 83.0

47 9.54 2200 2500 71.0 131.00

60 11.80 2200 2500 96.0 170.00

86 - KEYED (HEAVY DUTY)

25VQ.bmpC:\Program Files\ACAD2000\NDcatalogue\25VQ.bmp

IFP HIGH PERFORMANCE MOBILE SINGLE INTRA-VANE PUMPS

Performance Data - Typical Flows at 120° F, 10 W oil (128SUS), 0 PSI inlet Flow in Gallons Per Minute (GPM).

Pump Displacement R.P.M. 100 P.S.I. 1500 P.S.I. 3000 P.S.I. Model (in /rev.) (INPUT H.P.) (INPUT H.P.) (INPUT H.P.)

5(1.10)

8(1.67)

11(2.22)

12(2.41)

14(2.80)

1200 5.0 (0.4) 4.3 (5.0) 4.0 (10.0) 1800 7.5 (1.5) 7.0 (8.5) 7.0 (16.5) 2400 10.0 (2.0) 10.2 (12.0) 9.5 (22.0) 1200 8.0 (1.0) 7.0 (8.0) 6.5 (16.5) 1800 12.0 (1.7) 11.5 (12.0) 10.5 (23.0) 2400 16.0 (2.8) 16.0 (17.0) 14.9 (32.0) 1200 11.0 (1.2) 9.8 (11.0) 8.5 (21.5) 1800 16.5 (2.8) 15.4 (18.0) 14.2 (31.0) 2400 22.0 (3.0) 21.0 (22.0) 20.0 (42.0) 1200 12.0 (1.5) 11.0 (12.5) 9.8 (22.0) 1800 18.0 (3.0) 17.2 (19.0) 16.0 (34.0) 2400 24.0 (3.0) 23.4 (23.5) 22.2 (45.0) 1200 14.0 (2.0) 12.9 (13.5) 12.0 (27.5) 1800 21.0 (3.0) 18.5 (20.0) 19.0 (39.5) 2400 28.0 (3.5) 27.0 (27.0) 26.4 (52.5)

20 VQ

12(2.47)

14(2.77)

17(3.37)

19(3.72)

1200 12.0 (1.0) 9.5 (12.0) 7.5 (24.0) 1800 18.0 (2.5) 16.0 (17.0) 13.5 (35.0) 2400 24.0 (3.0) 22.5 (24.0) 20.0(46.0) 1200 14.0 (2.0) 11.5 (13.5) 9.5 (26.5) 1800 21.0 (3.0) 18.0 (20.0) 16.0 (39.0) 2400 28.0 (3.5) 25.0 (25.0) 23.0 (52.0) 1200 17.0 (2.0) 14.0 (16.5) 12.0 (32.0) 1800 25.5 (3.0) 22.0 (24.0) 20.0(47.0) 2400 34.0 (3.5) 31.0 (32.0) 29.0 (62.0) 1200 19.0 (3.0) 17.0 (20.0) 15.0 (39.0) 1800 28.5 (3.5) 25.5 (28.0) 24.0 (58.0) 2400 38.0 (4.5) 35.0 (36.0) 32.0 (70.0)

25 VQ

25(4.98)

30(5.96)

35(6.88)

38(7.42)

1200 25.0 (2.5) 20.5 (23.0) 17.5 (46.0) 1800 37.0 (4.0) 33.5 (36.0) 30.0 (69.0) 2400 50.0 (4.5) 42.0 (46.5) 42.5 (92.0) 1200 30.0 (4.0) 25.0 (28.5) 25.5 (56.0) 1800 45.0 (5.0) 40.0 (43.0) 37.0 (82.0) 2400 60.0 (6.0) 55.0 (56.0) 52.5 (110.0) 1200 35.0 (4.0) 29.0 (33.0) 25.0 (67.0) 1800 52.5 (5.0) 46.0 (51.0) 42.0 (95.0) 2400 70.0 (5.5) 62.5 (64.0) 60.0 (125.0) 1200 38.0 (4.5) 32.0 (35.5) 29.0 (69.0) 1800 57.0 (5.5) 50.5 (52.0) 47.0 (102.0) 2400 76.5 (6.0) 68.0 (69.0) 65.0 (136.0)

35 VQ

47(9.54)

50(9.90)

57(11.20)

1200 47.0 (4.0) 39.0 (22.0) 34.0 (46.0) 1800 70.0 (5.0) 64.0 (33.0) 60.5 (71.0) 2400 94.0 (9.0) 86.0 (47.0) 80.5 (95.0) 1200 50.0 (4.0) 42.0 (48.0) 38.5 (78.0) 1800 75.0 (6.0) 65.5 (70.0) 62.0 (116.0) 2400 91.5 (8.0) 81.5 (86.0) 79.0 (141.0) 1200 57.0 (5.0) 49.0 (22.0) 45.5 (92.0) 1800 85.5 (7.5) 76.5 (33.0) 71.5 (125.0) 2400 104.5 (8.0) 94.5 (47.0) 89.5 (160.0)

45 VQ

3

MAX. PSI2300

MAX. PSI2200

MAX. PSI2500

21(4.12)

1200 21.0 (2.0) 17.5 (20.0) 15.5 (39.0) 1800 31.5 (3.8) 28.0 (29.0) 25.5 (59.0) 2400 42.0 (4.5) 39.0 (39.0) 36.5 (76.0)

21(4.12)

1200 21.0 (2.0) 17.5 (20.0) 15.5 (39.0) 1800 31.5 (3.8) 28.0 (29.0) 25.5 (59.0) 2400 42.0 (4.5) 39.0 (39.0) 36.5 (76.0)

28(5.50)

1200 28.0 (2.6) 26.0 (22.0) 23.5 (58.0) 1800 42.0 (5.0) 39.0 (33.0) 37.5 (77.0) 2400 56.0 (6.5) 52.5 (47.0) 49.5 (98.0)

24(4.70)

1200 24.0 (2.2) 21.0 (22.0) 19.0 (46.0) 1800 36.0 (3.3) 33.0 (33.0) 31.5 (71.0) 2400 48.0 (4.4) 45.0 (47.0) 42.5 (95.0)

42(8.46)

1200 42.0 (4.0) 34.5 (39.5) 30.0 (68.0) 1800 63.0 (60.0) 56.5 (58.0) 52.0 (104.0) 2400 77.0 (7.0) 70.5 (72.0) 66.5 (123.0)

60(11.80)

1200 60.0 (5.5) 51.0 (55.0) 47.0 (94.0) 1800 90.0 (7.0) 80.0 (82.0) 75.5 (138.0) 2400 110.0 (8.5) 99.0 (101.0) 96.0 (170.0)

30VQ

IFP MOBILE & INDUSTRIAL SINGLE PUMP INSTALLATION DIMENSIONS

LK

NO.1 KEYED SHAFT

INLET OUTLET

O D

NO.11 SPLINED SHAFT

GC

BA

F

J

I

H

E

INLETOUTLET

O D

NO.151 SPLINED SHAFT

GCB

A

F

J

I

H

E

IFP 25V/35V/45VIFP 25VQ/30VQ/35VQ/45VQ

IFP 20V/20VQ

LK

NO.1 KEYED SHAFT

EXT.

EXT.

EXT.

EXT.

IFP MOBILE & INDUSTRIAL SINGLE PUMP INSTALLATION DIMENSIONS

20 SERIES 25SERIES A 6.12 6.38 B 5.22 4.75 C 2.5 1.5

D 4"Ø SAE 'B' 4"Ø SAE 'B' 4"Ø SAE 'B' E 4" 4.62 F 3 3 G .375 .375

H .56 .56 I 5.75 5.75

.875Ø .875Ø J 13 TH. 1.75 EXT. 13 TH. 1.75 EXT.

K .875Ø .875Ø

L KEY .187 KEY .187

EXT. 2.13 EXT. 2.31

Weight 32 lbs. 32 lbs.

Inlet 1-1/2" FL. 1-1/2" FL. Outlet 3/4" FL. 1" FL.

Foot

Pump Style Code Description Major Dia. Ext.

20V/VQ 1 3/16 Square Keyed 0.875 2.310

151 13T 16/32 Splined 0.875 1.750

25V/VQ 1 13/16 Square Keyed 0.875 2.312

3 #15 Woodruff Key 0.875 2.440

11 13T 16/32 Splined 0.875 1.750

25 14T 12/24 Splined 1.250 1.750

127 14T 12/24 Splined 1.250 2.310

35V/VQ 1 5/16 Square Keyed 1.250 2.880

11 14T 12/24 Splined 1.250 2.310

19 14T 12/24 X-Long Splined 1.250 3.050

86 5/16 Heavy-Duty Square Keyed 1.375 3.380

45V/VQ 1 15/16 Square Keyed 1.250 2.440

11 14T 12/24 Splined 1.248 2.440

19 14T 12/24 X-Long Splined 1.248 3.060

DIMENSION CHART

SHAFTS DESCRIPTIONS & CODES

- Other shafts available on request -

Bracket IFB - B IFB - B IFB - B

86 3/8 Heavy-Duty Square Keyed 1.500 3.440

30V/VQ

30 SERIES 35 SERIES 45 SERIES

7.28 8.5 6.96

4.94 6.02 4.85 1.69

5"Ø SAE 'C' 1.5 1.5 5"Ø SAE 'C'

5.51 6.36 4.62 3.25 3.69 3

.375 .500 .375

.688 .688 .56

7.125 7.125 5.75

1.25Ø 1.25Ø .875Ø

14 TH. 2.31 EXT. 14 TH. 2.44 EXT. 13 TH. 1.75 EXT

1.25Ø 1.25Ø .875Ø EXT. 2.88 EXT. 2.44 EXT. 2.31

KEY .3125 KEY .3125 KEY .187

2" FL. 3" FL. 1-1/2" FL. 1-1/4" FL. 1-1/2" FL. 1-1/4" FL.

IFB - C IFB - C

50 lbs. 75 lbs. 36 lbs.

IFP INDUSTRIAL SINGLE VANE PUMP SERVICE PARTS INFORMATION

SpiroloxRetaining Ring

Bearing

Shaft

* Vane kit

Spirolox Retaining Ring

Ret. Ring

Bearing

Shaft

* Vane kit

Retainer

Shaft Seal

Front Cover

(Inlet)

Rtaining Ring

Back Cover (Outlet)

Back-up Ring

'O' Ring

Sealing Ring

'O' Ring

* Outlet Plate

* Ring

* Inlet Plate

S/A

* Rotor

Rtaining Ring

Key

Retainer

Shaft Seal

Front Cover

(Outlet)

Back Cover (Inlet)

'O' Ring

* Inlet Plate

S/A

* Rotor

* Ring

* Outlet Plate

'O' Ring

Sealing Ring

Back=Up Ring

20V

25V/35V/45V

INCLUDE IN SEAL KIT* INCLUDED IN CARTRIDGE KIT


Key

IFP INDUSTRIAL SINGLE VANE PUMP SERVICE PARTS INFORMATION

PUMP SE CARTRIDGE ROTOR VANE RING INLET OUTLET SHAFTS KITS PLATE PLATE

5 02-102518N 402690N 02-136720N 333624N 584383N 585382N 1 497109N 8 02-102519N 333625N 151 497113N 20V 11 02-102520N 403539N 02-136721N 333626N 584384N 12 02-102521N 353901N

PUMP SE SEAL KIT SEAL KIT SHAFT SEAL SHAFT SEAL SHAFT SEAL BEARING COVER COVER

20V 497125N 981322N 394976N 429286N 429283N 1704N 02-102335N 250824N

BUNA VITON BUNA VITON SECONDARY FRONT BACK

PUMP SE COVER BOLT ( FT. LB. ) CARTRIDGE KIT ( IN. LB.) 20V 50 30

CARTRIDGE CHART


BOLT TORQUES

To change Cartridge Kit rotation, reverse the location of the inlet and the outlet support plates. Hand tighten the cartridge screws and use pump cover to align all the parts. Remove the cover and tighten the cartridge screws to the designated value. Sharp edge of vanes must lead in direction of rotation.

For satisfactory service life, use full flow filtration to provide fluid which meets ISO cleanliness code 16/13 or better.

14 02-102522N 353902N

12 02-102532N 584618N 941214N 326984N 591016N 588690N 1 238755N 25V 14 02-102533N 326985N 11 238929N 17 02-102534N 326986N 21 02-102535N 326988N

35 02-102554N 319398N 28 02-102555N 319399N

42 02-102572N 578900N 941049N 297510N 578903N 580921N 1 233369N 45V 50 02-102574N 297502N 11 242885N 60 02-102575N 297503N

21 02-102551N 575478N 941019N 394961N 576265N 575479N 1 233624N 35V 25 02-102552N 319396N 11 242287N 30 02-102553N 319397N

25V 922850N 919656N 394976N 429286N 429283N 1705N 942353N 224309N 35V 922851N 919262N 394973N 429284N 429281N 38441N 942355N 234248N 45V 919850N 919632N 394974N 429285N 429282N 131812N 942356N 229633N

25V 50 40 35V 100 90 45V 100 100

KIT

86

86

86

392669N

361760N

419882N

IFP MOBILE SINGLE VANE PUMP SERVICE PARTS INFORMATION

* Vane kit

* Vane kit

* Ring

* Inlet Plate S/A

* Rotor

Back Cover

(Inlet)

'O' Ring

* Inlet Plate S/A

* Rotor

* Ring

* Outlet Plate

'O' Ring

Sealing Ring

Back-Up Ring

20VQ

25VQ/30VQ/35VQ/45VQ



* Flex side plate

* Seal Pack

* Flex side plate

* Seal Pack

* Flex side plate

* Seal Pack

* Flex side plate

* Seal Pack

Back Cover

(Outlet)

Back-up Ring

'O' Ring

Seal ing Ring

'O' Ring

* Outlet Plate

SpiroloxRetaining Ring

Bearing

Shaft

Shaft Seal

Front Cover

(Inlet)

Rtaining Ring

Key

Spirolox Retaining Ring

Ret. Ring

Bearing

Shaft

Rtaining Ring

Key

Retainer

Shaft Seal

Front Cover

(Outlet)

IFP MOBILE SINGLE VANE PUMP SERVICE PARTS INFORMATION

PUMP SE CARTRIDGE ROTOR VANE RING FLEX INLET OUTLET SHAFTS KITS PLATE PLATE PLATE

5 497115N 402690N 922741N 333624N 416423N 419502N 497134N 1 497109N 8 497118N 333625N 151 497113N 20VQ 11 497120N 403539N 922743N 333626N 419501N 12 497121N 353901N

PUMP SE SEAL KIT SEAL KIT SHAFT SEAL SHAFT SEAL SHAFT SEAL BEARING COVER COVER

20VQ 497123N 451471N 394976N 429286N 429283N 001704N 02-102335N 250824N

BUNA VITON BUNA VITON SECONDARY FRONT BACK

PUMP SE COVER BOLT ( FT. LB. ) CARTRIDGE KIT ( IN. LB.) 20VQ 50 30

CARTRIDGE CHART


BOLT TORQUES

To change Cartridge Kit rotation, reverse the location of the inlet and the outlet support plates. Hand tighten the cartridge screws and use pump cover to align all the parts. Remove the cover and tighten the cartridge screws to the designated value. Sharp edge of vanes must lead in direction of rotation.


14 497122N 353902N

12 416439N 270597N 922710N 326984N 923956N 430805N 419079N 1 238755N 14 416440N 326985N 3 242747N 25VQ 17 416441N 326986N 11 238929N 19 421232N 326987N 25 270187N

35 413418N 319398N 38 413419N 319399N

42 416435N 283271N 922701N 297510N 923954N 430807N 415382N 1 233369N

45VQ 50 416436N 297502N 11 242885N 57 421233N 306772N

21 413420N 262154N 922700N 394961N 923953N 430806N 412003N 1 233624N 25 413421N 319396N 11 242287N 35VQ 30 413422N 319397N 19 275270N

25VQ 920021N 920023N 394976N 429286N 429283N 1705N 942353N 224309N

35VQ 920015N 920029N 394973N 429284N 429281N 38441N 942355N 234248N 45VQ 920025N 920027N 394974N 429282N 429285N 131812N 942356N 229633N

25VQ 50 45

35VQ 100 100 45VQ 100 105

127 424457N 21 416442N 326988N

24 417052N 262152N 922642N 234470N 923956N 430805N 419079N SAME AS 30VQ 28 416452N 224525N 25VQ

47 421234N 297718N

60 416437N 297503N 19 265575N

30VQ 920021N 920023N 394976N 429286N 429283N 1705N 942354N 224526N

30VQ 50 45

IFP 25VT/VQT VANE PUMPS

3.50

1.75

1.00

2.00

0.52

1.03

0.50

0.38

1.03

2.06 4.00

Ø1.00OUTLET PORTCONNECTION

.375-16 UNC-2B THD.

.75 DP., OR M10 THD..79 DP.(4) HOLES

Ø 2.50INLET PORT

CONNECTION

0.38

1.00 1.10

KEY .250sq.x2.00

3.26

L 1.50 1.62

NO.297 SHAFTINVOLUTE SPLINE.

FLAT ROOT, SIDE FIT13 TEETH, 16/32 PITCH.30° PRESSURE ANGLE

.875/.853 MAJOR DIA..725 MINOR DIAMETER.

NOTE-A/B ADAPTERS AVAILABLE, SEE PAGE A6.4

3.44

6.88

2.88

5.75

Ø4.75

Ø0.69

IFP

SINGLE UNIT

25VQT A * -297 R

RING SIZE

SHAFT-203 KEYED-297 SPLINE

ROTATIONR - CWL - CCW

-

INDUSTRIAL MODEL 25VT(See Page A4.2 for PerformanceInformation)MOBILE MODEL 25VQT(See Page A4.4 for PerformanceInformation)

PAD ADAPTER- SAE "A"- SAE "B"

25VT/VQT Pump Ordering Specifications♦

NO.203 SHAFT

.500-13 UNC-2B THD. ORM12 .94 DP. (4) HOLES

E

Series "L" "E"25VTA 8.940 3.2525VTB 9.300 4.00

V - SEE Page A4.8VQ-SEE Page A4.10

IFP 35VT/VQT VANE PUMPS

O 1.25OUTLET PORTCONNECTION

.437-14 UNC-2B THD.

.88 DP., OR M12 THD..88 DP.(4) HOLES

O 3.00INLET PORT

CONNECTION

KEY .312sq.x2.12


FLAT ROOT, SIDE FIT14 TEETH, 16/32 PITCH.30° PRESSURE ANGLE1.25/1.22 MAJOR DIA.

1.05 MINOR DIAMETER.

4.19

8.38

3.56

7.125

O 5.81

O 0.69

IFP

SINGLE UNIT

35VQT A 35 -297 R

RING SIZE



-


PAD ADAPTER- SAE "A"- SAE "B"- SAE "C"


Series "L" "E"35VTA 9.890 3.2535VTB 10.25 4.0035VTC 10.50 5.00

V - SEE Page A4.8VQ-SEE Page A4.10

4.19

2.10

2.44

0.593

1.190.62

2.31 5.00

0.50

1.37 1.58

3.44

1.22

L

1.50 2.18

NOTE-A/B ADAPTERS AVAILABLE, SEE PAGE A6.4

E

4.50

IFP 45VT/VQT VANE PUMP

4.75

2.38

1.38

2.75

1.406

0.62

1.382.75 5.00

O 1.50OUTLET PORTCONNECTION

.500-13 UNC-2B THD.

OR M14 THD.

.94 DP.(4) HOLESO 3.50

INLET PORT

CONNECTION

.625-11 UNC-B, ORM16 THD.30 31,8

1.25 DP.,(4) HOLES

1.50 1.67

KEY .375sq.x2.25

3.44

4.70 1.69

2.18


FLAT ROOT, SIDE FIT14 TEETH, 16/32 PITCH.30° PRESSURE ANGLE1.25/1.22 MAJOR DIA.

1.05 MINOR DIAMETER.

NOTE-A/B/C ADAPTERS AVAILABLE, SEE PAGE A6.4

4.19

8.38

3.69 4.03

3.56

7.125

O 5.81

O 0.69

IFP

SINGLE UNIT

45VQT A * -297 R

RING SIZE



-


PAD ADAPTER- SAE "A"- SAE "B"- SAE "C"


L

E

Series "L" "E"45VTA 11.07 3.2545VTB 11.43 4.0045VTC 11.75 5.00

V - SEE Page A4.8VQ- SEE Page A4.10

0.703

0.50

0.50

IFP "VT" PUMP ADAPTERS

45°

5.25

2.62

2.62

4.188

2.092(53.19)

.375-18UNC-28THD..850 THU FLANGE, 2 HOLES

(INCH THREADS)

5.130SNAP RING

OUTPUT COUPLINGSAE "A" COUPLING9 TOOTH "16/32"

3.25D. 2.00D.

0.057

0.257

"A" REAR MOUNT

.500-13UNC2B FLANGE,

2 HOLES

OUTPUT COUPLINGSAE "B" COUPLING13 TOOTH "16/32"

"B" REAR MOUNT

2.87

5.75

3.31

2.62

5.25 2.23D.4.003 D.

.385

.625-11UNC-2B THRU FLANGE

2 HOLES

3.31

7.125

8.38 D.

5.81 D.

5.003 D.2.38 D.

.52

SNAP RING

OUTPUT COUPLINGSAE "C" SIZE14 TOOTH "12/24"

"C" REAR MOUNT

Maximum torque to Output coupling 3875 Lb.in.

45VT/VQT:


35VT/VQT:


45VT/VQT:


35VT/VQT:


25VT/VQT:


45VT/VQT:


35VT/VQT:


25VT/VQT:

SNAP RING

A7.1

IFP T6 HIGH PERFORMANCE SINGLE & DOUBLE UNITS

FEATURES:

Pre-tested / ReversibleCartridge AssembliesHigh Pressure 4000 PSI (275 bar)Wide Range of DisplacementsHigh Volumetric EfficiencyDouble Lip Pin Vane DesignLower Noise Level

IFP model Max. Mounting

T6C

T6D

T6E

T6CC

T6DC

4000

3500

600

600

600

600

1" S. FLG

1 1/4" S. FLG

1 1/2" S. FLG

Max. Min.

Speed r/min

lb

3500 2.90 ~ 9.64

.66 ~ 6.10

4000

3500

8.69 ~ 13.86

p1-. .66 ~ 6.10

p1- 2.90 ~ 9.64

600P1- 1"S FLG

P1- 1 1/4" S. FLG

Operating SpecificationsBased on using petroleum oil at 120° F (49 °C), viscosity 150 SUS at 100° F (32 cSt at 38 °C), and 0 psi inlet pressure

series

T6EC

T6ED

3500 600

P1- 1 1/2" S. FLG

3500

p1- 8.69 ~ 13.86

p1- 8.69 ~ 13.86p2- 2.90 ~ 9.64

600 P1- 1 1/2" S. FLG

PSI

Displ. in / rev

Standard

Weight(SAE 4-bolt)Fluid Connection

2800

2200

2500

2800

2500

2200

2200

p2- .66~ 6.10

p2- .66 ~ 6.10

p2- .66 ~ 6.10

SAE - B

SAE - C

SAE - C

SAE - B

SAE - C

SAE - C

SAE - C

P2- .1" S. FLG

P2- 1" S. FLG

P2- 1" S. FLG

P2- 1 1/4" S. FLG

34

53

95

80

57

121

145

pressure

1 1/2" S. FLG

2" S. FLG

3" S. FLG

3 or 2 1/2"S FLG

3" S. FLG

3 1/2" S. FLG

4" S. FLG

Double Pump

Single Pump

Pressure Port Suction Port

Ordering Code T6* Single Vane Pump Ordering Code T6** Double Vane PumpIFP T6* ** 1 R N SERIES RING SIZE SHAFT ROTATION T6C T6D T6E

KEYEDSPLINE

R- RIGHTL- LEFT

IFP T6** ** 1 R N SERIES RING SIZE SHAFT ROTATION T6CC T6DC T6EC T6ED

KEYEDSPLINE

R- RIGHTL- LEFT

T6C Cartridge / Ring

05

06

08

Flow GPM @1200 rpm

03

12

14

17

10

25

28

31

22

T6D Cartridge / Ring

20

24

28

Flow GPM @1200 rpm

14

35

38

42

31

50

45

T6E Cartridge / Ring

50

52

62

Flow GPM @1200 rpm

45

72

66

C:\wliu\T6C.bmp

A7.2

IFP T6C SERIES HIGH PERFORMANCE VANE PUMPS

High Performance in an Economical PackageInternational T6C fixed displacement vanepumps are engineered for higher operating pressures (4000 psi) and shaft speeds (2800 rpm) demanded by today's expanding Fluid Power Market. The T6C has an SAE "B" mount with a wide variety of displacements and keyed/splined shafts.

- - - --IFP T6C 010 1 R N

Series Ring Size

03 14 05 17 06 22 08 25 10 28

12 31

Shaft1-7/8 keyed

Rotation R - RightL - Left

Design

3-Spline SAE "B" 13th4-Spline SAE "BB" 15th

Series

T6C

Max. Pressure

PSI (MPa) Max. Min.

2800 6004000(28.0)

Mounting

Standard

.66 ~ 5.42

(10.8 ~ 88.7)

Weightlb(kg)

34(15.5)

Fluid Connection (SAE 4-bolt)

Suction Inlet

1"S. FLG.

1-1/2"S. FLG.

Pressure Ports(Front & Back)

Speed r/min

Displ. in

3 /rev

(cm /rev)3

SAE - B

Fluid Type T6C Continuous T6C Intermittent

Antiwear Petroleum Base

Non Antiwear Petroleum Base

Water in Oil Emulsions

Water Glycols

Synthetic Fluids

2800

1800

3500(24.5)

2500(17.5)

2000(14.0)

2500(17.5)

4000(28.0)

3000(21.0)

2500(17.5)

Speed r/min Pressure psi(MPa) Speed r/min Pressure psi(MPa)

2800 2800

2800

1800

1800

1800

1800

1800

2000(14.0) 2500(17.5)

3000(21.0)

General Characteristics

Operating Specifications

Features:

* High Volumetric Efficiency * Lower Noise Levels* Double Lip Vane Design * Large Variety Displacements

IFP T6C SINGLE VANE PUMP INSTALLATION/DIMENSIONS

SHAFT CODE 3SPLINE SAE "B"CLASS 1-J498 b16/32 d.p. -7/8" Dia. - 13 teeth30° pressure angleFlat Root Side Fit

SHAFT CODE 4SPLINE SAE "BB"CLASS 1-J498 b16/32 d.p. -1"Dia. - 15 teeth30° pressure angleFlat Root Side Fit

1.60 1.79

O4.000 3.998

O.875 .874

SAE "B" Mtg.

1" S.Flg.112" S.Flg.

3.25 1.58 2.81

6.36

3

5.30

5.75

KEY.25x1.25

SHAFT CODE 1KEYED SAE "B"

OC9/16

Series Volumetric Displ. Vp

Speed n[R.P.M.]

Flow(GPM)

0 PSI 2000 PSI 3500 PSI

Inputpower(HP)

100 PSI 2000 PSI 3500 PSI

Performance Data - Typical flow at 120°F, 10 W Oil (115 SUS), 0 PSI Inlet

*025-028-031 = 2500 R.P.M. max. Not used because internal leakage**028-031 = 3000 PSI max.Int. is greater than 50 % theoretical flow

Dimension & Operating Characteristics

T6C-003 .66 in /rev 12001800

3.425.14

1.833.55 2.44

1.612.09

5.808.53 13.51

3

T6C-005 12001800

5.458.18

3.866.59

2.765.48

1.762.26

8.2112.07

13.5119.63

T6C-006

1.05 in /rev

12001800

6.7610.12

5.178.56

4.067.42

1.762.41

9.6614.32

16.0923.65

3

T6C-008

1.30 in /rev

12001800

8.3612.55

6.7810.97

5.689.86

1.932.57

11.5817.22

19.4828.49

3

T6C-010

1.61 in /rev

12001800

10.8116.20

9.2314.65

8.1113.50

2.092.74

14.3221.56

24.3035.88

3

T6C-012

2.08 in /rev

12001800

11.7617.64

10.4716.35

9.572.74

1.922.84

15.5323.05

26.3638.92

3

T6C-014

2.26 in /rev

12001800

14.5821.88

12.9920.29

11.8919.18

2.263.06

18.8328.32

32.0347.47

3

T6C-017

2.81 in /rev

12001800

18.4827.71

16.9926.16

15.7925.01

2.573.38

23.2335.24

39.9159.38

3

T6C-022 4.29 in /rev 12001800

22.2837.42

20.7031.86

19.6030.72

2.743.70

27.8442.00

47.6370.97

3

T6C-025* 4.84 in /rev 12001800

25.1437.69

23.5636.14

22.4435.00

2.894.02

31.0646.99

53.4279.66

3

T6C-028* 5.42 in /rev 12001800

28.1542.23

26.8640.94

26.2440.32**

2.874.27

34.6651.74

51.3776.73**

3

3.56 in /rev3

T6C-031* 6.10 in /rev 12001800

31.7047.56

30.4146.27

29.7945.65**

3.084.58

38.8057.95

57.5886.06**

T6C-020 3.89 in /rev 12001800

20.2330.34

18.9429.05

18.9429.05

2.413.58

25.4137.86

43.6464.85

3

IFP T6C-N SINGLE VANE PUMP SERVICE PARTS INFORMATION

CARTRIDGE CHART PUMP CAM VANE ROTOR PRESSURE PORT SHAFTS SIZE CART. KIT RING KIT PLATE PLATE T6C-003 S24-10692N 034-59050N 034-59099N S24-10350N 034-59772N 034-59774N #1 034-70814N T6C-005 S24-10694N 034-59051N #2 034-70880N T6C-006 S24-10696N 034-59052N #3 034-70815N T6C-008 S24-10698N 034-59053N #4 034-59426N T6C-010 S24-10721N 034-59054N T6C-012 S24-26478N 034-66595N T6C-014 S24-10723N 034-59206N T6C-017 S24-10725N 034-59207N T6C-020 S24-26859N 034-66607N T6C-022 S24-10727N 034-59208N T6C-025 S24-10729N 034-59209N T6C-028 S24-97761N 034-59245N T6C-031 S24-45785N 034-66843N

- All cartridge assemblies are factory tested prior to shipping - STANDARD VITON STANDARD VITON BEARING FRONT BACK SEAL KIT SEAL KIT SHAFT SEAL SHAFT SEAL COVER COVER S24-10333-0-N S24-10333-5-N 620-82012N 230-82054N 034-48565N 034-48564N


FRONT COVER(OUTLET)

*"O" RING

* SHFAT SEAL

SHAFTEXTERNAL SNAP RING

BEARING

EXTERNAL SNAP RING

INTERNAL SNAP RING

CARTRIDGE KIT

BACK COVER (INLET)

HEX HEAD CAP SCREW(115 FT-LBS)

* SEAL

*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY

VANE AND HOLDOUT PIN

SCREW

CARTRIDGE SUB-ASSEMBLY

DOWEL PIN

PORT PLATE

DOWEL PIN

CAM RING

* SEAL

* INCLUDED IN SEAL KIT

IFP T6D SERIESHIGH PERFORMANCE VANE PUMPS

High Performance in an Economical PackageInternational T6D fixed displacement vane pumps are engineered for higher operating pressures (3500 psi) and shaft speeds (2500 rpm) demanded by today's expanding Fluid Power Market.The T6D has an SAE "C" mount with a wide variety of displacements and keyed/splined shafts.

- - - --IFP T6D 020 1 R N

Series Ring Size

014 020 024 031 035

038

Shaft1- keyed (SAE-C)


Design

2- KEYED (NOT SAE)3 - SPLINED (SAE-C)4 - SPLINED (NOT SAE)

Series

T6D

Max. Pressure

PSI (MPa) Max. Min.

2500 6003500(24.5)

Mounting

Standard

2.90 ~ 9.64

(47.3 ~ 157.2)

Weightlb(kg)

59.4(27)


Suction Inlet

1 1/4"S. FLG.

2"S. FLG.


Speed r/min

Displ. in

3 /rev

(cm /rev)3

SAE - C

Fluid Type T6D Continuous T6D Intermittent




Water Glycols

Synthetic Fluids

2500

1800

3000(21.0)

2500(17.5)

2000(14.0)

2500(17.5)

3500(24.5)

3000(21.0)

2500(17.5)


2500 2500

2500

1800

1800

1800

1800

1800

2000(14.0) 2500(17.5)

3000(21.0)



042 045 050

Features:


SHAFT CODE 3SPLINE SAE CCLASS 1-J498 b12/24 d.p. -14 teeth30° pressure angleFlat Root Side Fit

SHAFT CODE 4SPLINE NO SAE CLASS 1-J498 b12/24 d.p. -14 teeth30° pressure angleFlat Root Side Fit

2.17 1.79

Ø 4.998

Ø.1.250 1.248

SAE "C" Mtg.

2" S.Flg. 114" S.Flg.

3.44 2.887.28

3.25

6.17

7.125

KEY.31x1.94

SHAFT CODE 1KEYED SAE C

Ø.69


Speed n[R.P.M.]

Flow(GPM)

0 PSI 2000 PSI 3500 PSI

Inputpower(HP)

100 PSI 2000 PSI 3500 PSI


*025-045-050 = 2200 R.P.M. max. **050 = 3000 PSI max.Int.


T6D-014 2.90 in /rev 12001800

15.0922.64

12.1419.69

10.1817.72

2.414.02

19.4728.97

28.1649.24

3

T6D-020 12001800

20.9331.38

17.9828.44

16.0126.47

2.744.50

26.4039.26

45.0667.10

T6D-024

4.00 in /rev

12001800

25.2037.82

22.2634.87

20.2932.88

3.064.82

31.3847.63

53.5780.14

3

T6D-028

4.80 in /rev

12001800

28.4442.64

25.4939.70

23.5237.73

3.225.15

35.4052.62

60.3589.95

3

T6D-031

5.50 in /rev

12001800

31.1646.73

28.2143.79

26.2441.82

3.385.30

38.6257.44

65.8298.16

3

T6D-035

6.00 in /rev

12001800

35.1952.79

32.2449.84

30.2847.87

3.705.63

43.2864.52

74.03110.56

3

T6D-038

6.80 in /rev

12001800

38.1457.19

35.2054.24

33.2352.28

3.865.95

46.8269.68

79.98119.40

3

T6D-042*

7.30 in /rev

12001800

43.1264.68

40.1661.73

38.2159.76

4.196.43

52.6278.37

90.12134.69

3

T6D-045* 8.90 in /rev 12001800

46.1969.28

43.2566.32

41.2864.36

4.346.60

56.1683.84

96.40144.02

3

T6D-050* 9.64 in /rev 12001800

50.0975.14

47.1472.19

45.97**71.02

4.507.08

61.4791.72

91.40**136.78

3

8.30 in /rev3

M10 x.79 DEEP

1.50

IFP T6D-N SINGLE VANE PUMP SERVICE PARTS INFORMATION

FRONT COVER(OUTLET)

*"O" RING

* SHAFT SEAL


BEARING

EXTERNAL SNAP RING

INTERNAL SNAP RING

CARTRIDGE KIT

BACK COVER (INLET)


* SEAL

* SEAL

*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY

VANE AND HOLDOUT PINCAM RING

DOWEL PIN

PORT PLATESCREW


DOWEL PIN

CARTRIDGE CHART PUMP CAM VANE ROTOR PRESSURE PORT SHAFTS SIZE CART. KIT RING KIT PLATE PLATE T6D-014 S24-33849N 034-66708N 034-53588N S24-10121N 034-59808N 034-59810N #1 034-70858N T6D-020 S24-26486N 034-66596N #2 034-70980N T6D-024 S24-97784N 034-59294N #3 034-70859N T6D-028 S24-10837N 034-59133N T6D-031 S24-10839N 034-59135N T6D-035 S24-10841N 034-59137N T6D-038 S24-10843N 034-59139N T6D-042 S24-10845N 034-59132N T6D-045 S24-10847N 034-59131N T6D-050 S24-40028N 034-66737N

- All cartridge assemblies are factory tested prior to shipping - STANDARD VITON STANDARD VITON BEARING FRONT BACK SEAL KIT SEAL KIT SHAFT SEAL SHAFT SEAL COVER COVER

S24-10138-0-N S24-20047-5N 620-82062N 620-82066N 230-00207N 034-47916N 034-47917N



A9.1

IFP T6E SERIES HIGH PERFORMANCE VANE PUMPS

High Performance in an Economical PackageInternational T6E fixed displacement vane pumps are engineered for higher operating pressures (3500 psi) and shaft speeds (2200 rpm) demanded by today's expanding Fluid Power Market. The T6E has an SAE "C" mount with a wide variety of displacements and keyed/splined shafts.

- - - --IFP T6E 066 1 R N

Series Ring Size

045 050 052

062 066

072

Shaft1- keyed (SAE-CC)


Design

2- KEYED (NOT SAE)3 - SPLINED (SAE-C)4 - SPLINED (SAE-CC)

Series

T6E

Max. Pressure

PSI (MPa) Max. Min.

2200 6003500(24.5)

Mounting

Standard

8.70 ~ 13.86

(142.4 ~ 227.7)

Weightlb(kg)

81.3(37)


Suction Inlet

1 1/2"S. FLG.

3"S. FLG.


Speed r/min

Displ. in

3 /rev

(cm /rev)3

SAE - C

Fluid Type T6E Continuous T6E Intermittent




Water Glycols

Synthetic Fluids

2200

1800

3000(21.0)

2500(17.5)

2000(14.0)

2500(17.5)

3500(24.5)

3000(21.0)

2500(17.5)


2200 2200

2200

1800

1800

1800

1800

1800

2000(14.0) 2500(17.5)

3000(21.0)



Features:


IFP T6E SINGLE VANE PUMP INSTALLATION/DIMENSIONS


Speed n[R.P.M.]

Flow(GPM)

0 PSI 2000 PSI 3500 PSI

Inputpower(HP)

100 PSI 2000 PSI 3500 PSI


T6E-045 8.70 in /rev 12001800

45.1567.72

41.9864.55

39.7262.29

5.478.69

55.8484.00

95.27142.74

3

T6E-050 12001800

50.2575.36

47.0872.19

41.6669.94

5.639.17

62.7694.30

105.56158.19

T6E-052

9.67 in /rev

12001800

52.2578.37

49.0875.20

46.8272.95

5.809.34

64.2196.40

109.75164.30

3

T6E-062

10.0 in /rev

12001800

62.3693.53

59.2090.36

56.9488.10

6.4310.14

75.96114.25

130.19195.04

3

T6E-066

12.2 in /rev

12001800

67.62101.42

64.5598.25

62.2996.00

6.7610.62

82.24123.60

141.13211.45

3

T6E-072

13.0 in /rev

12001800

72.00107.98

68.83104.81

66.58102.56

6.9211.10

88.51132.92

149.82224.49

3

13.86 in /rev3

SHAFT CODE 3SPLINE SAE CCLASS 1-J498 b12/24 d.p. -14 teeth30° pressure angleFlat Root Side Fit

SHAFT CODE 4SPLINE NO SAECLASS 1-J498 b12/24 d.p. -17 teeth30° pressure angleFlat Root Side Fit

2.2 2.45

O5.000 4.998

O 1.250

SAE "C" Mtg.

1.50" S.Flg.

4.33 2.06 3.588.87

3.88

7.38

7.125

SHAFT CODE 1KEYED SAE C-C

O.69


M10 x.79 DEEP

KEY .375/.373

3" S.Flg.

IFP T6E-N SINGLE VANE PUMP SERVICE PARTS INFORMATION

CARTRIDGE CHART PUMP CAM VANE ROTOR PRESSURE PORT SHAFTS SIZE CART. KIT RING KIT PLATE PLATE T6E-045 S24-10177N 034-59164N 034-59162N S24-10185N 034-59159N 034-59082N #1 034-71076N T6E-050 S24-40645N 034-66744N #2 034-71078N T6E-052 S24-10179N 034-59165N #3 034-71077N T6E-062 S24-10181N 034-59166N T6E-066 S24-10183N 034-59167N T6E-072 S24-40026N 034-66736N

- All cartridge assemblies are factory tested prior to shipping - STANDARD VITON STANDARD VITON BEARING FRONT BACK SEAL KIT SEAL KIT SHAFT SEAL SHAFT SEAL COVER COVER

S24-10186-0-N S24-10186-5N 620-82064N 620-82064N 230-03208N 034-70249N 034-70247N


FRONT COVER(OUTLET)

*"O" RING

* SHFAT SEAL


BEARING

EXTERNAL SNAP RING

INTERNAL SNAP RING

CARTRIDGE KIT

BACK COVER (INLET)


* SEAL

*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY


SCREW


DOWEL PIN


PORT PLATE

DOWEL PIN

CAM RING

* SEAL

A10.1

IFP T6CC HIGH PERFORMANCE DOUBLE VANE PUMPS

High Performance in an Economical Package

International T6CC fixed displacement vane pumps are engineered for higher operating pressures (4000 psi) and shaft speeds (2800 rpm) demanded by today's expanding Fluid Power market. The T6CC has an SAE "B" mount with a wide variety of displacements and keyed/splined shafts.

- - - - --IFP T6CC 010 10 1 R N

Series Front

Ring Size

05 20 06 22 08 25 10 2812 31

Shaft1-7/8 keyed


Design

3-Spline SAE "BB" 15th5-Spline SAE "B" 13th

Series

T6CC

Max. Pressure

PSI (MPa) Max. Min.

2800 6004000(28.0)

Mounting

Standard

.66 ~ 5.42

(10.8 ~ 88.7)

Weightlb(kg)

57.3(28)


Suction Inlet

1"S. FLG.

3" S. FLG.


Speed r/min

Displ. in

3 /rev

(cm /rev)3

SAE - B

Fluid Type T6CC Continuous T6CC Intermittent




Water Glycols

Synthetic Fluids

2800

1800

3500(24.5)

2500(17.5)

2000(14.0)

2500(17.5)

4000(28.0)

3000(21.0)

2500(17.5)


2800 2800

2800

1800

1800

1800

1800

1800

2000(14.0) 2500(17.5)

3000(21.0)



14

Back

Ring Size

05 20 06 22 08 25 10 2812 3114

STD. Opt.

2 1/2"S. FLG.

Features:


IFP T6CC DOUBLE VANE PUMP INSTALLATION/DIMENSIONS


Speed n[R.P.M.]

Flow(GPM)

0 PSI 2000 PSI 3500 PSI

Inputpower(HP)

100 PSI 2000 PSI 3500 PSI


T6CC-003 .66 in /rev 12001800

3.425.14

1.833.55 2.44

1.612.09

5.808.53 13.51

3

T6CC-005 12001800

5.458.18

3.866.59

2.765.48

1.762.26

8.2112.07

13.5119.63

T6CC-006

1.05 in /rev

12001800

6.7610.12

5.178.56

4.067.42

1.762.41

9.6614.32

16.0923.65

3

T6CC-008

1.30 in /rev

12001800

8.3612.55

6.7810.97

5.689.86

1.932.57

11.5817.22

19.4828.49

3

T6CC-010

1.61 in /rev

12001800

10.8116.20

9.2314.65

8.1113.50

2.092.74

14.3221.56

24.3035.88

3

T6CC-012

2.08 in /rev

12001800

11.7617.64

10.4716.35

9.572.74

1.922.84

15.5323.05

26.3638.92

3

T6CC-014

2.26 in /rev

12001800

14.5821.88

12.9920.29

11.8919.18

2.263.06

18.8328.32

32.0347.47

3

T6CC-017

2.81 in /rev

12001800

18.4827.71

16.9926.16

15.7925.01

2.573.38

23.2335.24

39.9159.38

3

T6CC-022 4.29 in /rev 12001800

22.2837.42

20.7031.86

19.6030.72

2.743.70

27.8442.00

47.6370.97

3

T6CC-025* 4.84 in /rev 12001800

25.1437.69

23.5636.14

22.4435.00

2.894.02

31.0646.99

53.4279.66

3

T6CC-028* 6.10 in /rev 12001800

28.1542.23

26.8640.94

26.2440.32**

2.874.27

34.6651.74

51.3776.73**

3

3.56 in /rev3

O 0.56

SHAFT CODE 5SAE 8 INVOLUTE SPLINE DATACLASS 1-FLAT ROOT SIDE FITJ498b - PITCH 16/3213 TEETH-30 ° PRESSURE ANGLE

10.46


4.00

BACKPressure Port P21" S. Flg.

2.94

Suction Port 21 2 " or 3" S. Flg.

3.47

FRONTPressure Port P11" S. Flg.

1.50

CODE 1KEYED SHAFT

.1875/.1855 KEY O .874

2.29 1.60

5.75

SHAFT CODE 3SAE 88 INVOLUTE SPLINE DATACLASS 1-FLAT ROOT SIDE FITJ498b - PITCH 16/3215 TEETH-30° PRESSURE ANGLE

1.79

O 3.998

KEY

6.87

T6CC-031* 5.42 in /rev 12001800

31.7047.56

30.4146.27

29.7945.65**

3.084.58

38.8057.95

57.5886.06**

*025-028-031 = 2500 R.P.M. max. Not used because internal leakage**028-031 = 3000 PSI max.Int. is greater than 50 % theoretical flow

3

IFP T6CC DOUBLE PUMP SERVICE PARTS INFORMATION

* SHFAT SEAL

SHAFT

EXTERNAL SNAP RING

BEARING

EXTERNAL SNAP RING


* SEAL

*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

DOWEL PIN

PORT PLATE

SCREW

DOWEL PIN

* SEAL

* SEAL*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

DOWEL PIN

PORT PLATE

DOWEL PIN

SNAP RING

HOUSING(INLET)

BACK COVER(OUTLET)



CARTRIDGE CHART PUMP FRONT BACK CAM VANE ROTOR PRESSURE PORT SHAFTS SIZE CART. KIT CART. KIT RING KIT PLATE PLATE T6CC-003 S24-10732N S24-10749N 034-59050N 034-59099N S24-10350N 034-59772N 034-59776N #1 034-59110N T6CC-005 S24-10734N S24-10751N 034-59051N (FRONT (FRONT (FRONT #2 034-66576N T6CC-006 S24-10736N S24-10753N 034-59052N CART. KIT) CART. KIT) CART. KIT) #3 034-59108N T6CC-008 S24-10738N S24-10755N 034-59053N #5 034-59109N T6CC-010 S24-10740N S24-10757N 034-59054N T6CC-012 S24-26510N S24-26482N 034-66595N S24-10116N 034-59772N 034-59776N T6CC-014 S24-10742N S24-10759N 034-59206N (BACK (BACK (BACK T6CC-017 S24-10744N S24-10761N 034-59207N CART. KIT) CART. KIT) CART. KIT) T6CC-022 S24-10746N S24-10763N 034-59208N T6CC-025 S24-10748N S24-10765N 034-59209N T6CC-028 S24-25510N S24-25547N 034-59245N

- All cartridge assemblies are factory tested prior to shipping - STANDARD VITON STANDARD VITON BEARING FRONT BACK HOUSING COVERSEAL KIT SEAL KIT SHAFT SEAL SHAFT SEAL COVER COVER 3" 2 1/2"

S24-10352-0-N S24-10352-5-N 620-82012N 620-82068N 230-82054N 034-59107 034-59425 034-59125 034-59105


* INCLUDED IN SEAL KIT INCLUDED IN CARTRIDGE KIT

* SEAL

KEY

*"O" RING

FRONT COVER(OUTLET)

IFP T6DC DOUBLE VANE PUMP INSTALLATION/DIMENSIONS


Speed n[R.P.M.]

Flow(GPM)

0 PSI 2000 PSI 3500 PSI

Inputpower(HP)

100 PSI 2000 PSI 3500 PSI


*025-028-031 = 2500 R.P.M. max. ***042-045-050 = 2200 R.P.M. max. **028-031-050 = 3000 PSI max.Int.


014 2.90 in /rev 1800 22.64 19.69 17.72 4.02 28.97 49.243

020 1800 31.38 28.44 26.47 4.50 39.26 67.10

024

4.00 in /rev

1800 37.82 34.87 32.88 4.82 47.63 80.14

3

028

4.80 in /rev

1800 42.64 39.70 37.73 5.15 52.62 89.95

3

031

5.50 in /rev

1800 46.73 43.79 41.82 5.30 57.44 98.16

3

035

6.00 in /rev

1800 52.79 49.84 47.87 5.63 64.52 110.56

3

038

6.80 in /rev

1800 57.19 54.24 52.28 5.95 69.68 119.40

3

042***

7.30 in /rev

1800 64.68 61.73 59.76 6.43 78.37 134.69

3

045*** 8.90 in /rev 1800 69.28 66.32 64.36 6.60 83.84 144.023

050*** 9.64 in /rev 1800 75.14 72.19 71.02 7.08 91.72 136.78**3

8.30 in /rev3

003 .66 in /rev 1800 5.14 3.55 2.44 2.09 8.53 13.513

005 1800 8.18 6.59 5.48 2.26 12.07 19.63

006

1.05 in /rev

1800 10.12 8.56 7.42 2.41 14.32 23.65

3

008

1.30 in /rev

1800 12.55 10.97 9.86 2.57 17.22 28.49

3

010

1.61 in /rev

1800 16.20 14.65 13.50 2.74 21.56 35.88

3

012

2.08 in /rev

1800 17.64 16.35 2.74 2.84 23.05 38.92

3

014

2.26 in /rev

1800 21.88 20.29 19.18 3.06 28.32 47.47

3

017

2.81 in /rev

1800 27.71 26.16 25.01 3.38 35.24 59.38

3

022 4.29 in /rev 1800 37.42 31.86 30.72 3.70 42.00 70.973

025* 4.84 in /rev 1800 37.69 36.14 35.00 4.02 46.99 79.663

028* 5.42 in /rev 1800 42.23 40.94 39.53** 4.50 52.62 73.76**3

3.56 in /rev3

O0.69

SHAFT CODE 4NO SAE SPLINECLASS 1-J498B12/24 D. P 14 TEETH-30 ° PRESSURE ANGLE

11.26

4.50


2.94

Suction Port 3" S. Flg.

4.31

FRONTPressure Port P111/4" S. Flg.

1.50

CODE 1KEYED SHAFT

.3126/.3106 KEY

O 114 ''

2.88

3.06

7.125

SHAFT CODE 3SAE C SPLINECLASS 1-J498b - 12/24 D.P.14 TEETH-30 ° PRESSURE ANGLE

2.17

O 4.998

KEYSHAFT CODE 1 KEYED SAE C

8.365

PRESSUREPORT

P1

P2

031* 6.10 in /rev 1800 47.56 45.97 44.86** 4.50 58.74 87.54**3

IFP T6DC DOUBLE PUMP SERVICE PARTS INFORMATION

- All cartridge assemblies are factory tested prior to shipping - STANDARD VITON STANDARD VITON BEARING FRONT BACK HOUSINGSEAL KIT SEAL KIT SHAFT SEAL SHAFT SEAL COVER COVER COVER

S24-10170-0-N S24-10170-0-N 620-82062N 620-82062N 230-00207N 034-48135 034-48579 034-48133


CARTRIDGE CHARTFRONT CART. KITS24-40791N S24-26490N S24-25891N S24-10849N S24-10851N S24-10853N S24-10855N S24-10857N S24-10859N S24-40236N

S24-97722N

034-66708N 034-66596N 034-59294N 034-59113N 034-59135N 034-59137N 034-59139N 034-59132N 034-59131N 034-66737N

S24-10767N S24-10769N S24-10171N S24-10773N S24-10775N S24-26480N S24-10777N S24-10779N S24-10781N S24-10783N

034-59245N

034-59050N 034-59051N 034-59052N 034-59053N034-59054N 034-66595N 034-59206N 034-59207N 034-59208N 034-59209N

034-53588N(FRONT VANE KIT) 034-59099N (BACK VANE KIT)

034-59810N(FRONT CART. KIT)

S24-10116N (BACK CART. KIT)

#2 034-71364N#3 034-71361N #5 034-66578N

034-59772N(BACKCART. KIT)

034-59808N(FRONT CART. KIT)

#1 034-71363N

034-59774N(BACKCART. KIT)

CAM(T6D)RING

BACKCART. KIT

CAM(T6C)RING

VANE KIT

ROTOR

PRESSUREPLATE

PORTPLATE

SHAFT

S24-10121N (FRONT CART. KIT)

PUMPSIZET6D-014

T6D-020T6D-024T6D-028T6D-031T6D-035T6D-038T6D-042T6D-045T6D-050

PUMPSIZET6C-003

T6C-005T6C-006T6C-008T6C-010T6C-012T6C-014T6C-017T6C-022T6C-025T60-028

* SHAFT SEAL

SHAFT

EXTERNAL SNAP RING

BEARING

EXTERNAL SNAP RING


* SEAL

*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

PORT PLATE

SCREW

DOWEL PIN

* SEAL

* SEAL*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

DOWEL PIN

PORT PLATE

DOWEL PIN

SNAP RING

HOUSING(INLET)

BACK COVER(OUTLET)




* SEAL

KEY

*"O" RING

FRONT COVER(OUTLET)

DOWEL PIN

IFP T6EC HIGH PERFORMANCE DOUBLE VANE PUMPS


International T6EC fixed displacement vanepumps are engineered for higher operatingpressures (3500 psi) and shaft speeds(2200 rpm) demanded by today's expanding Fluid Power market. The T6EC has an SAE "C" mount with a wide variety of displacementsand keyed/splined shafts.

Features:


- - - - --IFP T6EC 066 022 1 R N

Series Front

Ring Size

062 066 072

Back Shaft1 - KEYED SAE CC


Design

Ring Size

03 012 05 014 06 017 08 022 010 025028 031

2 - KEYED NO SAE3- SPLINED SAE C 4 - SPLINED SAE CC

Series

T6EC

Max. Pressure

PSI (MPa) Max. Min.

2200 6003500(24.5)

Mounting

Standard

.66 ~ 13.86

(10.8 ~ 226.80)

Weightlb(kg)

121(55)


Suction Inlet

(P1)=1 1/2", P2=1"S. FLG.

3 1/2"S. FLG.


Speed r/min

Displ. in

3 /rev

(cm /rev)3

SAE - C

Fluid Type T6EC Continuous T6EC Intermittent




Water Glycols

Synthetic Fluids

2200

1800

3500(24.5)

2500(17.5)

2000(14.0)

2500(17.5)

3000(21.0)

2500(17.5)


2200 2200

2200

1800

1800

1800

1800

1800

2000(14.0) 2500(17.5)

3000(21.0)



3500(24.5)

IFP T6EC DOUBLE VANE PUMP INSTALLATION/DIMENSIONS


Speed n[R.P.M.]

Flow(GPM)

0 PSI 2000 PSI 3500 PSI

Inputpower(HP)

100 PSI 2000 PSI 3500 PSI


*025-028-031 = 2500 R.P.M. max. **028-031 = 3000 PSI max.Int.


003 .66 in /rev 1800 5.14 3.55 2.44 2.09 8.53 13.513

005 1800 8.18 6.59 5.48 2.26 12.07 19.63

006

1.05 in /rev

1800 10.12 8.56 7.42 2.41 14.32 23.65

3

008

1.30 in /rev

1800 12.55 10.97 9.86 2.57 17.22 28.49

3

010

1.61 in /rev

1800 16.20 14.65 13.50 2.74 21.56 35.88

3

012

2.08 in /rev

1800 17.64 16.35 2.74 2.84 23.05 38.92

3

014

2.26 in /rev

1800 21.88 20.29 19.18 3.06 28.32 47.47

3

017

2.81 in /rev

1800 27.71 26.16 25.01 3.38 35.24 59.38

3

022 4.29 in /rev 1800 37.42 31.86 30.72 3.70 42.00 70.973

025* 4.84 in /rev 1800 37.69 36.14 35.00 4.02 46.99 79.663

028* 5.42 in /rev 1800 42.23 40.94 40.32 4.27 51.74 76.733

3.56 in /rev3

O .69

SHAFT CODE 4 SAE CC SPLINECLASS 1-J498B12/24 D. P 17 TEETH-30° PRESSURE ANGLE

13.06

4.665


2.94

Suction Port 3.5" S. Flg.

5.38

FRONTPressure Port P11.5" S. Flg.

2.06

CODE 2KEYED NO SAE

.3126/.3106 KEYO 1.2501.248

2.44 2.45

7.125

SHAFT CODE 3SAE C SPLINECLASS 1-J498b - 12/24 D.P.14 TEETH-30° PRESSURE ANGLE

2.20

O 5.00 4.998

KEYSHAFT CODE 2 KEYED SAE C-C

8.365

PRESSUREPORT

P1

P2

050 1800 75.36 72.19 69.94 9.17 94.30 158.19

052

9.67 in /rev

1800 78.37 75.20 72.95 9.34 96.40 164.30

3

062

10.0 in /rev

1800 93.53 90.36 88.10 10.14 114.25 195.04

3

066

12.2 in /rev

1800 101.42 98.25 96.00 10.62 123.60 211.45

3

072

13.0 in /rev

1800 107.98 104.81 102.56 11.10 132.92 224.49

3

13.86 in /rev3

3.58

M10 x.79 DEEP

045 1800 67.72 64.55 62.99 8.69 84.00 142.748.70 in /rev3

031* 6.10 in /rev 1800 47.56 45.97 44.86** 4.50 58.74 87.54**3

IFP T6EC DOUBLE PUMP SERVICE PARTS INFORMATION

CARTRIDGE CHARTFRONT CART. KIT S24-10205N S24-10207N S24-10209N S24-10211N


S24-10242-0-N S24-10242-5-N 620-82064N 620-82064-5N 230-03208N 034-70265 034-48579 034-70263


BACK CAM(T6C) VANE ROTOR PRESSURE PORT SHAFTSCART. KIT RING KIT PLATE PLATES24-10749N 034-59050N 034-59162N S24-10185N 034-59159N 034-59082N #1 034-71408NS24-10751N 034-59051N (FRONT (FRONT (FRONT (FRONT #2 034-71410NS24-10753N 034-59052N VANE KIT) CART. KIT) CART. KIT) CART. KIT) #3 034-716151N S24-10755N 034-59053N #5 034-71409NS24-10757N 034-59054N 034-59099N S24-26482N 034-66595N (BACK S24-10116N 034-59772N 034-59776N S24-10759N 034-59206N VANE KIT) (BACK (BACK (BACKS24-10761N 034-59207N CART. KIT) CART. KIT) CART. KIT)S24-10763N 034-59208N S24-10765N 034-59209NS24-25547N 034-59245N

CAM(T6E) RING 034-59164N 034-66744N 034-59165N 034-59166N 034-59167N 034-66736N

PUMP SIZET6*C-03T6*C-05 T6*C-06T6*C-09 T6*C-10T6*C-12 T6*C-14T6*C-17 T6*C-22 T6*C-25T6*C-28

PUMP SIZE T6E*-45 T6E*-50T6E*-52T6E*-62T6E*-66T6E*-72

* SHFAT SEAL

SHAFT

EXTERNAL SNAP RING

BEARING

EXTERNAL SNAP RING


* SEAL

*BACK UP RINGPRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

PORT PLATE

SCREW

DOWEL PIN

* SEAL

* SEAL*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

DOWEL PIN

PORT PLATE

DOWEL PIN

SNAP RING

HOUSING(INLET)

BACK COVER(OUTLET)




* SEAL

KEY

*"O" RING

FRONT COVER(OUTLET)

DOWEL PIN

IFP T6ED HIGH PERFORMANCE DOUBLE VANE PUMPS


International T6ED fixed displacement vanepumps are engineered for higher operatingpressures (3500 psi) and shaft speeds (2200rpm) demanded by today's expanding Fluid Power market. The T6ED has an SAE "C"mount with a wide variety of displacementsand keyed/splined shafts.

Features:


- - - - --IFP T6ED 066 035 1 R N

Series Front

Ring Size

062 066 072

Back Shaft1 - KEYED SAE CC


Design

Ring Size

014 020 024 031 035 038042 045

2 - KEYED NO SAE3- SPLINED SAE C 4 - SPLINED SAE CC

Series

T6ED

Max. Pressure

PSI (MPa) Max. Min.

2200 6003500(24.5)

Mounting

Standard

2.90 ~ 13.86

(47.3 ~ 226.80)

Weightlb(kg)

184(84)


Suction Inlet

(P1)=11/2", P2=11/4"S. FLG.

4"S. FLG.


Speed r/min

Displ. in

3 /rev

(cm /rev)3

SAE - C

Fluid Type T6ED Continuous T6ED Intermittent




Water Glycols

Synthetic Fluids

2200

1800

3000(21.0)

2500(17.5)

2000(14.0)

2500(17.5)

3500(24.5)

3000(21.0)

2500(17.5)


2200 2200

2200

1800

1800

1800

1800

1800

2000(14.0) 2500(17.5)

3000(21.0)



IFP T6ED DOUBLE VANE PUMP INSTALLATION/DIMENSIONS


Speed n[R.P.M.]

Flow(GPM)

0 PSI 2000 PSI 3500 PSI

Inputpower(HP)

100 PSI 2000 PSI 3500 PSI


*042-045-050 = 2200 R.P.M. max. **050 = 3000 PSI max.Int.


O 0.69

SHAFT CODE 3 SAE C SPLINECLASS 1-J498B12/24 D. P 14 TEETH-30 ° PRESSURE ANGLE

14.22

5.26

BACKPressure Port P21.25" S. Flg.

2.94

Suction Port 4" S. Flg.

5.84

FRONTPressure Port P11.5" S. Flg.

2.06

CODE 2KEYED NO SAE

.3126/.3106 KEY

O 1.248

2.44 2.20

7.125

SHAFT CODE 4SAE C-C SPLINECLASS 1-J498b - 12/24 D.P.17 TEETH-30 ° PRESSURE ANGLE

2.45

O 5.00 4.998

KEYED CODE 2 KEYED SAE C-C

8.365

PRESSUREPORT

P1

P2

050 1800 75.36 72.19 69.94 9.17 94.30 158.19

052

9.67 in /rev

1800 78.37 75.20 72.95 9.34 96.40 164.30

3

062

10.0 in /rev

1800 93.53 90.36 88.10 10.14 114.25 195.04

3

066

12.2 in /rev

1800 101.42 98.25 96.00 10.62 123.60 211.45

3

072

13.0 in /rev

1800 107.98 104.81 102.56 11.10 132.92 224.49

3

13.86 in /rev3

3.58

M10 x.79 DEEP

014 2.90 in /rev 1800 22.64 19.69 17.72 4.02 28.97 49.243

020 1800 31.38 28.44 26.47 4.50 39.26 67.10

024

4.00 in /rev

1800 37.82 34.87 32.88 4.82 47.63 80.14

3

028

4.80 in /rev

1800 42.64 39.70 37.73 5.15 52.62 89.95

3

031

5.50 in /rev

1800 46.73 43.79 41.82 5.30 57.44 98.16

3

035

6.00 in /rev

1800 52.79 49.84 47.87 5.63 64.52 110.56

3

038

6.80 in /rev

1800 57.19 54.24 52.28 5.95 69.68 119.40

3

042*

7.30 in /rev

1800 64.68 61.73 59.76 6.43 78.37 134.69

3

045* 8.90 in /rev 1800 69.28 66.32 64.36 6.60 83.84 144.023

050* 9.64 in /rev 1800 75.14 72.19 71.02 7.08 91.72 136.78**3

8.30 in /rev3

IFP T6ED DOUBLE PUMP SERVICE PARTS INFORMATION

CARTRIDGE CHARTFRONT CART. KIT S24-10205N On Request S24-10207N S24-10209N S24-10211NOn Request


S24-10219-0-N S24-10219-5-N 620-82064N 620-82064-5N 230-03208N 034-70265 034-70275 034-70271


CAM(T6E) RING 034-59164N 034-66744N 034-59165N 034-59166N 034-59167N 034-66736N

BACK CAM(T6D) VANE ROTOR PRESSURE PORT SHAFTSCART. KIT RING KIT PLATE PLATEOn Request 034-66708N 034-59162N S24-10185N 034-59159N 034-59082N #1 034-71416NS24-26492N 034-66596N (FRONT (FRONT (FRONT (FRONT #2 034-71418NS24-25893N 034-50294N VANE KIT) CART. KIT) CART. KIT) CART. KIT) #3 034-714151N S24-10861N 034-59113N #5 034-71417NS24-10863N 034-59135N 034-53588N S24-10865N 034-59137N (BACK S24-10121N 034-59808N 034-59810N S24-10867N 034-59139N VANE KIT) (BACK (BACK (BACKS24-10869N 034-59132N CART. KIT) CART. KIT) CART. KIT)S24-10871N 034-59131N On Request 034-66737N 034-66737N

PUMP SIZE T6E*-45 T6E*-50T6E*-52T6E*-62T6E*-66T6E*-72

PUMP SIZE T6*D-14T6*D-20 T6*D-24T6*D-28 T6*D-31T6*D-35 T6*D-38T6*D-42 T6*D-45T6*D-50

* SHFAT SEAL

SHAFT

EXTERNAL SNAP RING

BEARINGEXTERNAL SNAP RING


* SEAL

*BACK UP RINGPRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

DOWEL PINPORT PLATE

DOWEL PIN

* SEAL

* SEAL*BACK UP RING

PRESSURE PLATE

ROTOR ASSEMBLY


CAM RING

DOWEL PIN

PORT PLATE

DOWEL PIN

SNAP RING

BACK COVER(OUTLET)




* SEAL

KEY

*"O" RING

FRONT COVER(OUTLET)

SCREW

HOUSING(INLET)

IFP T6 VANE PUMP CARTRIDGE KIT ASSEMBLY

BEARING SURFACEBEARING SURACE

Cartridge assembly rotation may be changed by inverting cam ring and re-positioning diwel pins in holes of the pressure plate and port plate corresponding to the direction of rotation as shown in Fig. A1. Pour clean hydraulic fluid over vane/rotor assembly and tighten two screws to 40 in.lbs. To check proper assembly, both suction ports in the pressure plate should be inline along with fill hole in the cam ring, see Fig.A2(fill hole on cam ring will be slightly offset).

-When installing bearing shaft use care not to damage or distort snap ring by applying to much force, Fig. B. Snap ring must be removed by passing over bearing surface of the shaft and not the shaft seal surface, as this will damage shaft seal surface and cause shaft seal leakage.-When installing shaft make certain not to damage the seal during installation.

-To prevent possible damage to internal parts, the pump should never be started dry or without internal lubrication.-Manually fill pump housing with system fluid. Prime mover should be jogged until pump has primed.-Initial start up should be at a low pressure and increased gradually at 500 psi increments until system pressure has been reached.

Fig. A-1

Parts in position forright-hand (CW) rotation

Parts in position forleft-hand (CCW) rotation Fig. A-2

Fig. B

Suction Ports

Cam Ring Hole

SNAP RING GROOVESANP RING GROOVE

COAST TO COAST LOCATIONS TO BETTER SERVICE YOUR REQUIREMENTS

West Coast Toll Free (800) 432-6405 Toll Free Phone (888) 220-1414 East Coast Toll Free (800) 363-8446 Visit our updated Website: www.intlfpa.com Toll Free Fax (888) 220-1415 E-Mail: [email protected]

43105 Business Park DriveTemecula, CA 92590 USA

4600 Garand, Montreal Qc H4R 2A2 Canada

Fluid Power of America

Take advantage of International Fluid Power’s industry leading prices on our full product line March 2008

FEATURES:

International Fluid Power’s VHR variable volume vane pump is designed with a special bias piston mechanism ensuring stable fl ow & pressure performance for a wide variety of precision applications. Quiet journal bearings and optimum suction-discharge port design minimize operating noise. VHR are equipped with adjustable fl ow & pressure adjustments to meet your applications in a compact pump design.

Model No. Capacityin3/rev

No - load Flow Rate (GPM) Pressure Adjustment Range

Mpa (kgf/cm2)

Allowable Peak Pressure

Mpa (kgf/cm2)

Operating Speed RPM

Weightlbs

1000 RPM 1200 RPM 1500 RPM 1800 RPM Min. Max.20

VHR-1B-1A5 1.02 4.4 5.3 6.6 7.9 1300 - 3000 PSI 3000 PSI 800 1800

VHR Variable Volume Vane Pump

VHR - 1 B - 1 A 5Model VHR

Pump size: 1

Mounting methodB: Flange type mounting

Pressure adjustment range(1300 - 3000 PSI)

Pressure ControlA: Pressure Compensated

Ring size 1:7.9 GPM at 1800 RPM

*Additional fl ow sizes available upon request

Availa

ble

SAE- 2 Bolt

Mou

ntains

Documents

IFP VTM42 POWER STEERING PUMPS - Coastal Hydraulics