Embed Size (px)
DESCRIPTION
INFANT BABY MONITORING SYSTEM WITH PC INTERFACE............BIOMEDICAL APPLICATIONBABY TEMPERATURE,BABY HEART RATE...DEAR STUDENTS,pre/final year project abstract pl download http://www.slideshare.net/maastechIEEE BASED EMBEDDED SYSTEM PROJECTS(hardware projects)/FINAL YEAR PROJECTS/MINI PROJECTS/DIPLOMA PROJECTSINPLANT TRAINING DETAILS, (ECE/EEE/E&I/CSE/BIOMEDICAL/IT/MECHATRONICS/AYTOMOBILES)&MSC ELECTRONICS..INDUSTRIAL VISIT,project details/ipt details/project discussion/idea sharing......dont hesitate, pl call me..........,dont hesitate, pl call me..........,thanksR.ASHOK KUMARMAASTECH89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK)KODAMBAKKAMCHENNAI-600024, www.maastechindia.comPH:044-24844676R.ASHOK KUMAR-098402 34766B. MAIL VELAN-098841 01622ipt/projects full details....PL VISIT http://www.maastechindia.com (projects list,abstract,video,photo gallery)
Citation preview
BIOMEDICAL PROJECTS-An Infant Monitoring System Using CO2 SensorsHung Cao; Lun-Chen Hsu; Ativanichayaphong, T.; Jeongsik Sin; Stephanou, H.E.; Chiao, J.-C.
Summary:In this paper, we proposed an infant monitoring system to reduce the potential risks for sudden infant death syndrome (SIDS). This system can be used for infants at home or in a hospital nursery room. The system consists of carbon dioxide (CO2 ) sensors and active radio frequency identification (RFID) technology. A commercial metal-oxide based CO2 sensor was chosen and characterized in sensitivity, selectivity and humidity dependence. A proof-of-concept system, to be used for two infants in the same room, was designed and assembled. The RFID transmission was accomplished with a wireless module at two different operating frequencies. The results are promising. A method for further practical applications in a large nursery room is also discussed in details in this paper.
INFANT INCUBATOR PARAMETER SENSING AND MONITORING THROUGH WIRELESS
We have Designed a system which comprises of essential hard
ware and software for monitoring the parameters through wireless
Communication.
To control the temperature of the air adjacent an infant in an
incubator. is to circulate the air within an incubator with a blower
driven by a motor and to vary the blower speed based on the
temperature of the air within the incubator.
Thermistors for sensing air temperature and motor controllers
are known and have been used to control the temperature of the air
adjacent an infant in an incubator and to reduce the blower speed and
thereby the associated noise in the enclosure.
It is also necessary to monitor the CO2 Level in the incubator
Frequently, so that if the CO2 Level increases, In such a case, a
oxygen valve is also actuated , for the infant to breathe properly.
We have to attach transducers to infants in an incubator to
directly measure the infants temperature, respiration rate, pulse, and
other physiological parameters and sent to a remote computer through
wireless for processing the data.
Sensors Involved in Measurement:
1. Co2 Sensor
2. Thermistor
3. Heart Beat Sensor
Block Diagram:
PIC Microcontroller
PIC 16F877
Signal Conditioning Circuits(ANALOG)
Thermistor CO2 Sensor
Heart beat Sensor
Wireless RF Transmitter
433.92MHZ(FSK)
AIR Blower
Driver CKT
Wireless RF Receiver
433.92MHZ(FSK)
+12V DC POWERSUPPLY
+12V DC POWERSUPPLY
