Upload
others
View
17
Download
0
Embed Size (px)
Citation preview
IE Browser- User Manual (For Windows PC)
1. How to log into camera on IE
Note: Our camera does not support view on Chrome, Firefox and Safari
Download “UC Client” via this link: www.cameracd.com, to search out camera ip address as below(Please refer to separate Search tools User Manual if you need more details)
IE address bar enter the IP address of the camera, press the Enter key to enter the camera login
interface (Default username admin and password 123456), as below
Note:
1) Since this Player has plug in, most of the antivirus program on your PC will regard it as virus
and stop it from install. Please take note this program will not cause any damage to your
computer, and you need to have it installed and allow it operate on your PC then you can view
the camera on IE succeed.
2) If you can not install the player succeed, please check If your PC has this program – Microsoft
Visual Studio_32-bit, you can search on your PC to download
3) If you can not log into IE, please check if your camera IP address and your PC are in the same
segment
2. Brief instruction for IE Menu
Home
Configuration--->Camera
Image: Here you can set camera working mode and image flip function and image white balance
modify
OSD: You can change user-defined information such as Camera name, Font size and Time stamp
here
Pricacy Mask: You can customize a region of the camera does’t show
Video: Get camera video details here
Configuration--->Network
Basic: Get camera IP information here
P2P: View cloud ID and settings to enable P2P service
Access Encryption: Set RTSP and ONVIF encryption, effectively protect the video security
Configuration--->Event
Video Detect: Here open video detection, only supports cloud storage(Please refer to separate
QuickStart Guide Manual if you need more details)
Configuration--->Storage
General Config: local storage: Memory Card & USB(not supported) and network storage: NFS
(cloud storage support)
Schedule Record: Set the schedule video
Device Manager: Storage management
Configuration--->System
User Manage: You can change default User name and password here
Device Language: You can change camera language
Date&Time: Here you can modify the camera's time
Factoty&Reset: Reset camera to factory settings
Reboot: Restart camera
Uprage: Upgrade camera version here(Upgrade can not power off and network)
Configuration--->Information
Version: Here view camera firmware version
Note: Camera default IP address:192.168.0.123 (when camera and computer are directly connected)