Upload
ifm-electronic
View
215
Download
0
Embed Size (px)
Citation preview
7/30/2019 Identification System Brochure UK
1/14
Identification systemsfor industrialproduction control.
www.i
fm.com
/gb/identification
Identifica
tionsystems
7/30/2019 Identification System Brochure UK
2/14
LF system125 KHz
RFID systemDTS125
Opticalcode reader
Multicode reader
type O2I
LF/HF system125 KHz13.56 MHz
UHF system868 MHz (EU)913 MHz (USA)
RFID systemDTE100
RFID systemDTE800
2
Identification systems from ifm electronic.The optimum solution for every requirement.
For industrialapplications
7/30/2019 Identification System Brochure UK
3/14
up to 100 mm AS-i 16 bitIdentificationin routingconveyors.
up to 2 m
RS232EthernetTCP/IP
Ethernet/IP
1D bar codes,2D matrix
codes
Identification of1D and 2D codes forthe monitoring ofprocess operations.
up to 10 mEthernetTCP/IP
240 bit EPC512 bit user
up to 60 mm Profibus DP 32 KB
Identificationin conveyors.Large data volumes,high speed.
Identification inproduction and logistics.Long ranges,many tags.
3
RFIDproduction
andlogistics
RFID
conveyors
RFIDrou
ting
conveyors
Optical
codereader
Rang
e
Fieldb
us
Storag
ecapa
citytag
Hard
tag,
ada
pted
to
theap
plica
tionconditi
on
Smarttag
,
low-cos
tadh
esiv
etape
7/30/2019 Identification System Brochure UK
4/144
High reading reliability:Automatic setting of the
exposure time, adaptation by
segmented lighting for critical
surfaces.
Intelligence in the sensor:Verifier system reduces data
transmission.
Flexible connection:RS-232 and Ethernet TCP/IP
interface.
Quick in the process:
Object speeds of up to 7 m/s.
Compact integration:Illumination, optics, evaluation
and interfaces in an industrially
compatible housing.
Easy handling:The system is configured and
ready for use within a few
minutes with PC software or
directly on the sensor.
Multicode reader type O2IThe compact all-rounder.
The compact unit is installed using thesuitable mounting set and connectedto the controller (PLC) via the processinterface.Parameter setting is done via anEthernet cable using a common PC.
Powerful
identification.
In addition to t
Data Matrix code
ECC200, the ifm
multicode reader
handles further
2D and 1D codes.Reading is not
dependent on the
orientation of t
code to the sen-
sor. Even dama-
ged or soiled
codes are reliab
identified,even if
28 % of the
information has
been damaged.
Further function
include the out-
put of the code
position via the
process interfac
adjustable total
7/30/2019 Identification System Brochure UK
5/145
ality parame-
rs, individual
lumination set-
ngs for each
nfiguration in a
oup, integrated
ult memory and
cess protectionth password.
e professional
ftware of the
lticode reader
kes the high
ading reliability
the Data Matrix
de to a new
mension.
p choice for
ice/perfor-
nce:
e multicode
ader provides
gh functionality
d performance
the price of a
nsor.
Optimum
illumination.
In addition to an
automatic expo-
sure setting,
manual adjust-
ment
is also possible.Four lighting
segments can be
deactivated and
activated manu-
ally. So optimum
results are
achiev-ed even
with highly re-
flective metal
surfaces.
The ifm multicode reader detectsnumerous 2D and 1D codes.The standardised 2D code can beapplied in different ways: printed onpaper, engraved by laser or dot-peened onto a metal surface.
Production control for solar modulesof the company Conergy AG:the decision in favour of the multi-code reader was taken due to its highreading rate. The compact dimensionsand the integrated lighting ensure
installation requiring only little space.
O2I in the
application.
There is a wide
range of applica-
tions for the mul-
ticode reader in
industry from
product tracking
and production
control to product
identification.
They are used for
the automotive
and food indus-
tries, conveying,
the production of
solar installations
as well as ma-
chine tools and
print machines.
Further information at
www.ifm.com/gb/multicodereader
Orientation-independent identificationof 1D and 2D codes.
QR code
PDF code
DMC code
Bar code
RFIDproduction
andlogistics
RFID
conveyors
RFIDrou
ting
conveyors
Optical
codereader
7/30/2019 Identification System Brochure UK
6/146
Plug and play:Cost reduction with quick and
easy set-up.
Efficient:
Connection of up to 31 RFIDreaders to one AS- i master.
Safe:High reading reliability for
compact design.
Ready for operationat once:No programming for read / write
systems with AS-Interface.The stored value is automatically
provided by the transponder
when the antenna is passed.
Certified:The AS-Interface certification
guarantees interoperability in
automation technology.
RFID system DTS125Keep track of the workpiece.
Plug and Play also for the hardware:connection via M12 connector or AS-isplitter box. The DTS125 system canbe integrated into AS-i networks inno time and is ready for operationimmediately. In addition to the lowercost for hardware, this also saves timeduring set-up.
The DTS125 RFID system ensuressmooth logistics flow on a productionline for transmissions. All workpiececarriers can be identified by meansof RFID. Optical processes such as barcodes were eliminated due to the
severe operating conditions (oils,metal swarf).
The DTS125 RF
identification
system from ifm
is an industrial
compatible iden-
tification syste
in 125 KHz tech-
nology. It is thfirst RFID syste
for AS-Interface
worldwide.
7/30/2019 Identification System Brochure UK
7/147
RFIDproduction
andlogistics
RFID
conveyors
RFIDrou
ting
conveyors
Optical
codereader
The DTA300 RFID reader with increasedread / write distances up to 100 mmsolves tasks in assembly and convey-ing technology and in handling auto-mation.
e compact read
ite heads in-
ude, in addition
the antenna,
e complete
aluation and
e interface to-i. So the units
n be operated
rectly on the
-Interface and
able data
ansmission to
e controller.
ID tags for
assem-bly and
conveyor
systems. The ro-bust
transponders,
which do not
require any bat-
ter-ies, are parti-
cularly suited for
filling systems.
The system is
also the optimum
choice for mar-
king workpiece
carriers.
DTS125 in the
application.
The DTS125 RFID
system has been
designed for
production con-
trol in assembly
and conveying
technol-
ogy, handling,
Further information at
www.ifm.com/gb/dts125
PLC
Profinet
gateway
LF RFID system withintegrated AS-Interface.
7/30/2019 Identification System Brochure UK
8/148
Clear:Status display via LED and
integrated web server.
Flexible:
Connection of RFID antennas ordigital inputs / outputs. Antenna
and transponder combinations of
some bits to several Kbytes.
Easy:Connection of the antennas with
unshielded standard cables of
0.3 m to 20 m.
Integrable:Function blocks enable easyintegration into the higher level
automation or process control.
Certified:The Profibus DP certification
guarantees interoperability in
automation technology.
Robust:
Protection rating IP 67 for harshindustrial environments.
RFID system DTE100The electronic route card.
The LF or HF read / write antennas inan industrially compatible housing aresimply connected to the evaluationunit via a standard M12 connector.
RFID system with
evaluation unit,
antennas and
transponders.
ifm electronic h
developed a new
RFID system for
production andconveying in par
ticular.
The robust eval-
uation unit has
Profibus DP inte-
face. The inte-
grated web serve
enables easy
parameter settin
via the web
browser.
Scancodeandwatchthe
video
ontheDTE100system!
7/30/2019 Identification System Brochure UK
9/149
e requirements
harsh indu-
rial environ-
nts are met by
stable metal
using, a wide
mperature
nge and thegh protection
ting IP 67.
e new RFID
aluation unit
E100 has four
tenna connec-
ons, which can
ternatively be
ed as digital
Os. The anten-
s are connected
a standardised
12 connectors.
e standard pin
signment of the
O connections
sures that
common sensors
or actuators are
directly connec-
ted and powered
from the RFID
evalu-ation unit.
LF and HF
transponder.In addition to LF
transponders with
up to2-Kbit
memory, the
prod-uct portfo-
lio of ifm electro-
nic also covers HF
tran-sponders
with
16 Kbits as FRAM
version which can
be rewritten an
unlimited number
of times.
All connections are for standard M12connectors. Current is also directlysupplied via an M12 connection.The wide range of accessories suchas Profibus connection cables andterminating resistors facilitate thesystem set-up.
DTE100 in the
application.
The RFID system
platform is widely
used in produc-
tion for identify-
ing tools or
monitor-
ing production
steps.
Data can be saved
and read in the
transponder as on
an electronic
route card.
Further applica-
tions can be
found in quality
assur-ance, in the
automotive indu-
stry as well as in
automation and
conveying.
Easy use and
flexible parame-
ter setting allow
the user to solve
each identifica-
tion task precisely
and
without any prob-
lems.
Further information at
www.ifm.com/gb/dte100
LF and HF tran-
sponder with up
to 16 Kbits as
rewritable FRAM
version.
PLC
RFID evaluation
unit
Web browser
RFIDproduction
andlogistics
RFID
conveyors
RFIDrou
ting
conveyors
Optical
codereader
LF/HF RFID with integratedProfibus DP interface.
7/30/2019 Identification System Brochure UK
10/1410
Clear:Status display via LED and
integrated web server.
Flexible:
Ultra low, low, mid and widerange antennas for every
application.
Easy:UHF evaluation unit with four
external antenna terminals.
Certified:Ethernet TCP/IP interface for
parameter setting and datatransmission.
Robust:The protection rating IP 65
meets all requirements for harsh
industrial environments.
RFID system DTE800Long ranges for
production and logistics.
UHF evaluation
units.
As components
of the UHF syste
platform, the
evaluation units
DTE800 for
Europe andDTE900 for the
USA are
compliant with
865-870 MHz
and 902-928
MHz
respectively.
The stationary
units in the UHF
range allow long
read / write ran-
ges with passive
tags.
Up to 10 m:
Wide range antenna for the simul-taneous detection of large quantities,e.g. boxes on pallets when gates arepassed.
Connection of
4 antennas.
Only for ifm:
UHF evaluation
unit with differenttypes of antenna,
also for mixed
operation. With
Ethernet interface
and digital inputs
and outputs.
7/30/2019 Identification System Brochure UK
11/14
RFIDproduction
andlogistics
RFID
conveyors
RFIDrou
ting
conveyors
Optical
codereader
11
Up to 2 m:
Mid range antenna for the reliableidentification of larger units, e.g.on a conveyor belt.
tra low and low
nge antennas.
ese antennas
e distinguished
the near field.
order to
hieve a high
lectivity, themallest
ssible designs
e used as they
nage short
ading ranges.
id range
tennas.
e to its smaller
mensions the
d range an-
nna
chosen for
plications in
e near / far field
th
Wide range
antennas.
With an angle of
aperture of 30
these antennas
have been devel-
oped for appli-
cations in the farfield where read-
ing ranges of
up to10 m are
required.
Up to 20 cm:
(Ultra) low range antenna for theselective detection of individualproducts in the close range.
DTE800 in the
application.
The UHF system
platform from ifm
electronic is used
in production,
intralogistics and
conveying due to
the application-
specific antennas.
Goods such as
packaging or
pallets can be
detected without
contact.
The UHF RFID is
optimised for
applications in
production and
material flow
control, the asset
and supply chain
management as
well as track &
trace.
Further information at
www.ifm.com/gb/dte800
PLC
RFID evaluation
unit
UHF RFID system forworldwide use.
7/30/2019 Identification System Brochure UK
12/14
Efficient control of processes with RFID.
The DTE100 RFID system can beoperated with different antennas with125 KHz (LF) or 13.56 MHz (HF).
Inductive RFID
technology
The RFID system
(RadioFrequency
IDentification)
from ifm elec-
tron-ic generates
an electromagne-
tic field for rea-
ding and writing
of data.
The electro-
magnetic field
emitted by the
antenna induces
voltage in the
passive ID tag(transformer
principle).
This activates the
ID tag (transpon-
der) which re-
turns its code.
Process-ing of
the code and
transmission e.g.
to the AS-Inter-
face are carried
out in the read /
write head.
Advantage: reli-
able data trans-
mission in
dynamic reading
processes Depen-
ding on
application,
range, data volu-
mes, and read /
write dis-tances
different
RFID frequencies
are used, e.g.
125 KHz (LF),
13.56 MHz (HF),
868 MHz (UHF,
Europe) and913
MHz (UHF, USA).
Example:
RF identification
system DTS125
with integrated
antenna.
read / write system
antenna
ID tag
7/30/2019 Identification System Brochure UK
13/14
System at a glance:
Operating distance [mm]
Field of view size [mm]
50
20 x 14 36 x 26 68 x 50
100 200
Order no. red light O2I100 O2I102
LF RFID system and transponders (selection)
Description Order no.
RFID read / write system, AS- Interface, range max. 10 mm DTA100
RFID read system, AS-Interface, range max. 20 mm DTA101
RFID read / write system, AS- Interface, range max. 65 mm DTA200
RFID read system, AS-Interface, range max. 65 mm DTA201
O2I104
Order no. infrared O2I101 O2I103 O2I105
50
46 x 32 77 x 56 140 x 100
100 200 200
40 x 30
RFID read / write system, AS-Interface, range max. 100 mm DTA300
RFID read system, AS- Interface, range max. 110 mm DTA301
Description Order no.
ID tag, M18 x 1 mm, screw mounting E80311
ID tag, diameter 12 x 2 mm E80312
ID tag, diameter 20 x 2.15 mm E80317
ID tag, diameter 30 x 2.15 mm E80318
ID tag, diameter 50 x 2.2 mm E80319
ID tag, ISO card E80320
UHF RFID evaluation units, antennas and transponders
Description
Multicode reader
Order no.
RFID UHF evaluation unit, Ethernet, 2 DI / 2 DO, EU/ETSI DTE800
RFID UHF evaluation unit, Ethernet, 2 DI / 2 DO, US/FCC DTE900
RFID UHF ultra low range antenna, EU/ETSI/US/FCC ANT805
RFID UHF low range antenna, EU/ETSI ANT810
RFID UHF low range antenna, US/FCC ANT910
Description Order no.
RFID UHF wide range antenna, 70/70 EU/ETSI ANT830
RFID UHF mid range antenna, 100/100 EU/ETSI ANT820
RFID UHF wide range antenna, 70/70 US/FCC ANT930
RFID UHF ID tag/D50X3.3/04 E80350
RFID UHF on metal ID tag/D55X13/04 E80351
LF/HF RFID evaluation units, antennas and transponders
Description Order no.
RFID evaluation unit, Profibus DP EU/ETSI DTE100
RFID antenna 125 KHz ANT512
RFID antenna 13.56 MHz ANT513
Description Order no.
ID tag/30X2.5/05 125 KHz 256 bit E80360
ID tag/30X2.5/05 125 KHz 2048 bit E80361
ID tag/30X2.8/03 13.56 MHz 16 Kbit FRAM E80370
ID tag/30X2.5/06 13.56 MHz 896 bit E80371
200 x 150 400 x 300
1000 2000
7/30/2019 Identification System Brochure UK
14/14
ifm electronic gmbh
Friedrichstrae 145128 Essen
Tel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200
E-mail [email protected]
Position sensors
Sensors formotion control
Industrial imaging
Safety technology
Process sensors
Condition monitoringsystems
Industrialcommunication
Identification systems
Systems formobile machines
Connectiontechnology
Overviewifm product range:
Accessories
Visit our website:
www.ifm.com
Over 70 locations worldwide at a glance at www.ifm.com
ifmarticleno.
7511
471Wereservetherighttomaketechnicalalterationswithoutpriornotice.PrintedinGermanyo
nnon-chlorinebleachedpaper.04/12