3
IDAS™ RC-FS10 Remote Communicator IDAS™ is Icom’s digital land mobile radio system based on the NXDN™ digital common air interface and now adds IP networking capability to the system components already available. The IDAS TM Conventional IP Network system allows repeater IP interlinking as well as a simple virtual radio / dispatcher solution without relying on third party solutions. RC-FS10 Remote Communicator •The RC-FS10 Remote Communicator creates a virtual radio / simple dispatcher on a Windows ® PC. The PC software provides a minimum set of programmable dispatcher console-like functions including simple repeater control. •The RC-FS10 consists of the virtual radio software and the CT-24 Digital Voice Converter unit, which digitally compress the voice into a digital data stream. •The optional CT-23 PTT Microphone Adapter allows the PTT button of the connected SM-25 Desktop Microphone or HM- 152 Hand Microphone to work like on a real radio. Any off-the-shelf PC headset may be used without the CT-23 but the operator will need to mouse-click the virtual PTT CT-24 CT-23 SM-25 IP Network IDAS™ Conventional IP Network RC-FS10 Remote Communicator RC-FS10 Optional

IDAS™ RC-FS10 Remote Communicator IDAS™ is Icom’s digital land mobile radio system based on the NXDN™ digital common air interface and now adds IP networking

Embed Size (px)

Citation preview

Page 1: IDAS™ RC-FS10 Remote Communicator IDAS™ is Icom’s digital land mobile radio system based on the NXDN™ digital common air interface and now adds IP networking

IDAS™ RC-FS10 Remote Communicator

IDAS™ is Icom’s digital land mobile radio system based on the NXDN™ digital common air interface and now adds IP networking capability to the system components already available. The IDASTM Conventional IP Network system allows repeater IP interlinking as well as a simple virtual radio / dispatcher solution without relying on third party solutions.RC-FS10 Remote

Communicator

• The RC-FS10 Remote Communicator creates a virtual radio / simple dispatcher on a Windows® PC. The PC software provides a minimum set of programmable dispatcher console-like functions including simple repeater control.

• The RC-FS10 consists of the virtual radio software and the CT-24 Digital Voice Converter unit, which digitally compress the voice into a digital data stream.

• The optional CT-23 PTT Microphone Adapter allows the PTT button of the connected SM-25 Desktop Microphone or HM-152 Hand Microphone to work like on a real radio. Any off-the-shelf PC headset may be used without the CT-23 but the operator will need to mouse-click the virtual PTT button on the screen to transmit.

CT-24

CT-23

SM-25

IP Network

IDAS™ Conventional IP Network

RC-FS10 Remote Communicator

RC-FS10Optional

Page 2: IDAS™ RC-FS10 Remote Communicator IDAS™ is Icom’s digital land mobile radio system based on the NXDN™ digital common air interface and now adds IP networking

RC-FS10 Remote Communicator

RC-FS10 Virtual Radio / Dispatcher PC screen explanation

Each tab can be programmed to a specific setting for a repeater (Total 8 settings = 8 repeater/sites)

40 programmable buttons for preset calls/functions settings etc.

Audio volume and virtual monitor button

Activity log ID information

DTMF entry Status setting

Virtual PTT button

SDM settings

Note: The RC-FS10 is still under development. The final version may look different from this.

Page 3: IDAS™ RC-FS10 Remote Communicator IDAS™ is Icom’s digital land mobile radio system based on the NXDN™ digital common air interface and now adds IP networking

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. IDAS, IDAS logo are trademarks of Icom Incorporated. NXDN is a trademark of Icom Incorporated and Kenwood Corporation. Windows is a trademark of Microsoft Corporation

1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 URL: http://www.icom.co.jp/world/index.html

RC-FS10 Remote Communicator

Note: The RC-FS10 is still under development. The final version may look different from these screenshots.

RC-FS10 user programmable screen examples

Assign only the functions you require to customize the screen to your liking.

Background / function button colors are also user selectable.