ICP Test Report Certification Packet/media/electronics_technical/...nov-TEST REPORT NO 4002E11121307.rR02 'The new RoHS directive 201 1/65/EU, on Jul. 21 , 201 1 come into lorce on

1

ICP Test Report Certification Packet

Company name : Littelfuse, Inc.

Product Series: 5x20 Fuse

Product #: 215xxxXP

Issue Date: December 3, 2012

It is hereby certified by Littelfuse, Inc. that there is neither RoHS (EU Directive 2002/95/EC,

2011/65/EU)-restricted substance nor such use, for materials to be used for unit parts, for

packing/packaging materials, and for additives and the like in the manufacturing processes.

In addition, it is hereby reported to you that the parts and sub-materials, the materials to be used

for unit parts, the packing/packaging materials, and the additives and the like in the manufacturing

processes, are all composed of the following components.

Issued by:

(1) Parts, sub-materials and unit parts

This document covers the 5x20 Fuse RoHS-Compliant series products manufactured by

Littelfuse, Inc.

＜ Raw Materials Used

Please see Table 1

(2) The ICP data on all measurable substances

Please see appropriate pages as identifed in Table 1

Remarks：

Form 585-047 Rev. A 2/21/06

2

Table 1: List of Raw Materials covered by this report Total Parts Raw Material Part Number Raw Material Description Page(s)

1 C910510/ 910-553 Cap (Copper Shell)

Base & Plating 3-6

2 910-556 Cap Base

Cap Plating 7-10 11-13

3 YJ50/YJM (909-449) Ceramic Body 14-24

4 11-0595 (082xxx) Tinned Wire – Cu99.9MSn 25-31

5 0042xx Tinned Wire – Cu Clad (CuNi44 Sn) 32-38

6 687xxx-001 Silver Plated Wire- Ag-Cu Sn Plated 39-44

7 648901 Yarn 45-53

8 YT-09 (195116) Flux 54-68

9 YTW102 (692539-002) Solder 69-73

10 YTW206 (692529) Solder 74-78

11

C030204, 934-073, 934-077, 934-078, 934-084,934-085, 934-089 C030210

Overcap – Fuses Copper Shell (base and plating)

79-82

12 EP608 (087355) HMA-Glue (Epoxy Adhesive) 83-94

13 091250 Sand Filler 95-101

14 091251 Sand Filler 102-108

15 091254 Sand Filler 109-117

16 425900 Ink-Orange 118-128

17 425901 Ink- Red 129-139

18 425902 Ink-Black 140-150

19 425903 Ink-Yellow 151-161

20 425904 Ink-Blue 162-172

21 425906 Ink-Brown 173-183

22 425907 Ink-Green 184-194

23 425909 Ink-Grey 195-205

24 425911 Ink-Violet 206-216

25 425913 Pale Blue Ink 217-227

26 C610(909-532) Ceramic Tube KER610 228-251

nov'TEST REPORT

NO.jA002E11121307'1R02 DaG:Dec.t5,2Oi1 page 1 of4Custom6i Suzhou FuHong Eteclronic IndustialCo., L6.AddT€sg: NO.89 WEIDU ROAD, WANGTINGTOWN. XIANGCHENG oIsTRIcT. sUzHoU. CHINAReport on tie subnitied samptes.id to beSample name: Copper shellModsl: /

Materlal: /D€cripiion: /Buyer: /Supplier: /

SamPle rcceiwd date: Elec.'13,2011T€dng poriod: From Dec.13,2011 lo Dec.15,2o.l1

T€lino Reou6tedAs sp€cified by client, to detemine the L€ad, Cadmium, Mercury & Hexavat€nt Chromilm content an the slbmified sampte inaccordance wilh Dircctive 200295/EC (RoHS).

Te.Uno method:

T€sling liem Measuring instrument MQLLead (Pb) IEC 62321:2008, section I rcP-oEs 2mg/kgcadmium (cd) IEC 62321:20t,3, s€clion 9 tcPoEs 2 mg/kgllercury (Hg) IEC 62321:2008, section 7 lcPoEs 2 mg/kgChromrum (Cr l'1) IEC 62321:2008, Annex B 0 o2mgkg'

---FOR FURTHER DETAILS, PLEASE REFERTOTHE FOLLOWNG PAGE(ST**'

leg-' 0.02 mg/kg reGrc lo the MQL of sampte extraction tiquid.

99!9!cis!i-When tesled as specined the submi(ed sample compli€d wilh the rcquirements of commission Decision of 18 Aug 2005amending Directive 2002/95/EC notilied undef document 2005/618/EC.

Pro,ect Leader /{bjA-L(Engine€r) J 4

lnsoected bv

,**'*''*,n-, [,[rlg-,i ti-Y\

,ffi:::j:,,44

SHENZHEnl AOVTESTINC TECHNO!OGY CO..L.TD,KUI\ISIIAI\I BRANCIi Holline86.512.5510 8000

nov.NO,: A002E11121307-1 R02

TEST REPORT

Tesled by ICP-OES

Add the digestion sotutioni thevessel is healed until the sampl€has b€€n dissolved

Weigh the sample into

F*_-l-Content (Melal substEle)

Add the digeslion solutjon, ctose

the micfowave ves:€|.

F;;1.-and l\Iercury Content (Plaling)

To Detenn exavalenl Chromium Content (bojting- wateF extraction): (Metat substrate)

The sample is digesred in the

mrcrowave oven iollowing a sp€citic

decomposilion program.

Tesl lh€ s€mple solution and the 0.02mg/kg standard solution by UV-VIS.

Hotline86-512-5510 8000

To

+Cooling the vessel, fltet washed and

filled to the ma* with distilled wat€r.

Remove the sample, and coolthe beaker to room lemperature,and do the color leadion

sample in the beaker.Heat 50 mL of Dl waler in the

beaker to boiling ior 10 min

To Delemine

___+l coorins. rirtei washed and lilled l_-_----|l resteo oy l+fl_*lI

t o t he ma*w i th D twa te r . I l r n " r ,u rn "n , I l " * ' I

SHENZHsN AOV TG6TING ICCHITOI"OGY CO.,L'O.KUNAHAN BRANCH a

nov'NO.i 4002E11121307-rR02

5. To O€temine Hexavalent Chromium

,':"j":::i v^02

Place 1-5

TEST REPORToste:oec15,2011

Contentin colorless and cotorcd cnromaE coating on metats(Plaljng)

5 2 Eoiling- wat6F extraction

Tako the (50+5) cm'?

sample in the beaker.

S!IENZHEN AOV'CSTING IECIINOIOGY CO..ITD,KUNSHAN gNANCH Hotlinea6-512-5510 8000

lf the tesl rcsult is posilive,

the sample is considercd tohave hexavalenl chromilm

Compare the

and lhe 0.02 mg/(qstanda.d solution

Eoiling- wateF ext€ctjonprccedurc shall be used to

lfthere is int€rference or it is hard to decide whetherthe sampl€ have tie h€xavatent chromium

Remove tie sample, and cool

lhe beaksr to room tempeEture,

and do the color reaolion

Heat 50 mlof Dlwaier in the

beaker lo boiling for 10 min

Test the sample solution and the 0.02mg/kg standard solution by UV,VIS.

T€t Re6ult3:

Unit RoHS

Limil

Result

Substrate Plating'

Lead (Pb) mg/Kg 1000 N.O. N.O.Cadmium (cd) mg/Kg 100 N.D, N.D.lvercury (Hg) mgn(]s 1000 N.D. N.D.chromium (Crl'I) mg/Kg 1000 Negalive Negative

nov-TEST REPORT

NO 4002E11121307.rR02

'The new RoHS directive 201 1/65/EU, on Jul. 21 , 201 1 come into lorce on Jan. 03, 20 1 3 the fomat imptementation. Direclive2002,95/EC shall be rcpeated simuttaneousty.

-specimens, which requested to determine Lead, cadmium and l,rercury conteni, have been dissorved comprererv

-N.D.=not detected(

GTI #,ffiffi,HTest Report

Report No. RLSZE0o1492l00002

Applicart DONGGUAN CITY XNHAI METAL PRODUCTS CO.'LTD

Address I 'ST WEIMING ROAD HENGZENG AV.XINAN COMMUI"IIryTOWN DONGGUAN CITY GUANGDONG PROVINCE

The following samplqs) and samPle informttion wavwere submitt€d rnd idbehaH of the clientSample NameMateridlSample Received DateTesting Period

T€st Requ€st€d

T€st Method

As specified by client, to test Lead(Pb), Cadrnium(Cd),Hexavalent Chromium(Cr(Vl)) in the submitted sample(s).

Test Result(s) Please refer io the following page(s).

age I of4

GAN

by/on the

lc

033098

Glnfdd&Chil

a

BASE OF CAPBRASS H65Nov. 16,2012Nov. 16, 2012 to Nov. 19, 2012

Di.d !y

Appt@dR

c!!rnE rEslrNg INrEtNAlloNAl cottonNlol{comot.r4lc6ti D755,33tSii'ra cdmplsrn1E ft sll- .orip s ll@cx'e ftn

Rcvicr€d by

DdcNov. 19,

No. I

Cdlldi€Iffi (S*)Co-Lrt Eofi,li LinNlti{ Zfla BD'a ru Dntrrt

@4 0 0 - 0 7 8 E . 3 ! 3

IEC 62121:2008 Ed.l Sec.9

IEC 612r:2008 Ed.l S€. 9

IEc 62321:2008 Ed.t Sec-7

IEC 62121:2C108 Ed.l Annex B

picL L

$6i.d ttu4!.

GTI

cl{ra[ r

I F_}'H.mrylTest RePort

Report No. R1S2E001492100002

T€rr R€rrlt(sl

Page 2 of4

Tested ltem(s) Result

Lead(Pb) 13 mgllg

Cadmium (Cd) N.D.

Mercury(Hg) N.D,

Hexavalent Chrom ium(c r(v l)) Negative

Tested Sample/Part D€scriptioD Metal base

Note: The sample had bden di,csolved totally tested for Lead, Cadmium'-MDL = Method Detection Linit-N.D. = Not Detected (

o

GTI F_i,H"m,m

Report No RIS2E001492100002

Test Process

1. Lmd(Pb),Cadmiun(cd)

2, Mercury(Hg)

3. Hexavalent Chromiun(C(Vl))

Test Report

ctuTtt t !st | o rNlElr lal toNAL cottolal lof lconormLnrcr l l 0755-!36S:7i0 Compi:r .r E_m6r .4mcir rr t t . l ' ren c 'n

Page 3 of4

@.iif;".,,,

Weigh saraple ed place it m amicrowave digE'stion ves s el

Sdecl a test sallplc

m.aswing about 50t5cnf

AElyred ty UV-V1s

a

GTI #,mffi,^)#Test Report

Report No. RLS2E001492100002

Photo(s) of the sample(s)

*** End of rcport ***

The test aeport is effective only with both signatue and sp€cialized stamp. The result(sreport refer only to the sarnple(s) tested. Without written approval of CTI, thisreDroduced exceDt in full.

Pag. 4 of 4

shown in thiscan't be

ccNlaE ta i r |NG tNlERNAlto l tA l co l to l^r ioNComorarnr carr 0755-33681100 Complsrn l E-r3r l conpia 'urdcI Nen com E n ra , , . , ' i i , . i . f l i Ld

O;';;,;",,,.,,,

a

GTI #,HMJ"M

Sample Received DateTesting Period

T€st Requested

Test Mothod

Test ReportReport No. RLSZE001492I0O00I

Applicant DONGGUAN CITY XINHAI METAL PRODUCTS CO.,LDAddress I 'ST WEIMING ROAD HENGZENG AV.XINAN COMMLINITY

TOWN DONGGUAN CITY CUANGDONG PROVINCE

The following samplqs) and sample informatiotr was/were submitted andbehalf of the clientSample Name SILVER COLOR PLATING OF CAPMaterial El€ctrolytic Nickel

Page I of3

by/on the

Nov. 16;2012Nov. 16, 2012 to Nov. 19, 2012

As specifled by client, to test Lead(Pb), Cadmium(cd),Hexavalent Chrcmium(Cr(Vl)) in the subrnitted sample(s).

T€st Resul(s) Please refer to the following page(s).

elclliod by

4rt ov.dty

Rrvi.&dby

D& Nov. 19,

No. I

a

1033098

Cd!f!di! I@bd (Sedd Co-bf Ea8wdbtil Zoc Bs'- ToDitti:t' Cu-fiL.& 6na

cIt l rE ra5TrN6,NlEtNArroNl! cotPol^l lo l lcodpLi hr cari 0 7 55-l3li I I / i)0 c ompld ril E -fi3r1 I cohpia rl@cl' ce.l .ofr

.a00.6t t6- ! l l

T€st Itein(s)

Ref€r to IEc 62321:2008 Ed.t

R€fer to IEc 62321:2008 Ed.l

Refe. to IEC 62321 :2008 Ed. I

IEC 62321:2008 Ed.l Annex B

teic.l ltu|gr.

E 03 ! { 4? . r r c f l i n n

o

GTI lt.)m.ffiirmTest Report

Report No. RLSzE001492l0000l

Test€d Sample/Prrt Desc ption silvery plating

Not€: The wasb€d plrtirg had beon dissolv€d totally test€d for Lead,Mercury.-MDL = Method Detection Limit-N.D. = Not Detected (

o

GTI #-),m.ffi^'Y!Test Report

Report No. RLSZE00I492I00001 P€e3o f3

Photo(s) ofthe sample(s)

+** End of repon ***

The t€st rcport is elfective onty with both signature and specialized stamp. The shown in thisreport ref€r only to the samplds) test€d. Witlod witten apProval of CTl, thisreorcduced exceot in full.

can't be

ct,{nt f t l f l tG rNIElr{ArrotrAt cot?olAI loNcanro aLnl cair !f55-3308r fao lompla'nl E m$l coc'piii rlrc].l' ce1l c.rr

,aa 0 0 - 6 1 8 8 . 1 3 3

scsI

Test ReportPOLYFIL AGOBERALLMENDSTMSSE 2OA,

was/w6re submitted and identified by/on behalfofthe client as:

Validit nownForQueStiPlease Co ith scs

No. : CE/2011/84950 D e | 2011112101

CH€3OO ZUG / SWITZERLAND

Cu99.9MSn'1'14595

2011t1lt25201 1t11/25 rO 201I |1',01

Page: 1 or 7

rr|| [ltt!|||tlt[t

The following sample(s)

S€mple DescriptionBuyer/Order No.Sample Receiving DateTesting Period

lest Result(a) Plea6eefer to next page(s).

prqt iadsd Ds Gn ,epd eind bComFiy -r ,: !;t lLr. . . i ; l :r l i l l{ i l rt lrd r qti ' r^rl l i9i: l+,11\- em+,i , -,:r. ift",rl.

.ysuq8d b b cs€rcond rbns d ssubrd lo Tems ad cd@ l.l:

o n L y a i d w l h L n h . t m B d c | € d l n !

E d ftr|tld

clsnH L.Do'|b.t - Trhd

Test ReportPOLYFILAGOBERALLI\4ENDSTRASSE

T66i R.6ultls)

PART t.lAME No.1

No.: CE/2011/84950 Dale :2O114ZO1

2OA, CH63OO ZUG / SWITZERLAND

Page'.2 of 7

t I] t l

SILVER COLORED METAL WIRE (INCLUDING THE PLATING LAYER)

Te3t lt6m(s) Unit Method MDLR.3ultNo,l

Cadmium (Cd) mg/KgWith reterence to IEC 62321r 2008 andperfomed by ICP-AES.

n.d.Lead (Pb) mgKg 24Mercury (Hg) mS/kS n.d.Hexavalent Chromium Cr(Vl) With reference to IEC 62321: 2008 and

pedormed by Boiling \r€ter ext€ctionMethod.#

Negative

Sum of PBBS

mgikS With reference to IEC 62321: 2008 andperfomed by GC/MS.

n.d.Monobromobiphenyl 5 n.d.Dibromobiphenyl 5 n.d.Tribromobiphenyl 5 n.d.Tetrabromobiphenyl 5 n.o.Pontabromobiphenyl n.d,Hexabrcmobiphenyl 5 n.o.Heptabromobiphenyl n.d.Octabromobiphenyl 5 n.d.Nonabrornobiphenyl 5 n.d.Dec€bromobiphenyl 5 n .d .Sum of PBOEa n.d.Monobromodiphenyl ether n.d.Dibromodiphenyl ether 5 n.o.Tribromodipheny! ethe. 5 n.d.Tetrabromodiphenyl ether n.d.Pentabromodiphenyl ether n.d.Hexabrcmodiohenvl ether 5 n.d.Heptabromodiphenyl ether 5 n.o,Octabromodiphenyl ether n.o,Nonabromodiphenyl ether 5 n.d.Decabromodiphenyl ether 5 n.d.

eGlG{d rh s ied @d €nrclb Bpdcn€ry 'l+ !r ! rlrl . .n 1!ts,:r1,rtilr. ;l'!l* rrn . imri+Al'r-\r jrl4.f4! 1r€11hsdocmdssdby'h€c.mpany&bldlobcffi6|codibGo's*to. e.d'mc romal dmstu suq

d ^ t ' n d w l h L n h r m B d c r . d ! n d p o B d r t s t o G c s r a n d r h 3 d Mldrrgh6add]Ed'on6un6lh6'm

t',i!r: :d, dri:_ 11rs6rorPre

Test Report No. : CE/2011/84950 Date | 2011h21O1 Page: 3 of 7tl]tIlltltfltttltPOLYFILAG

OBERALLMENDSTRASSE 2OA, CH€3OO ZUG / SWITZERLAND

Test ltem(s) Unit method MDL ResultNo.1

HalogenHalogen-Fluorine (F)(CAS No.: 14762-94-8)

mg/Kg With reference to BS EN M5A2,2007.Analysis was perfomed by lC.

50 n,o,

HalogenChlodne (Cl)(CAS No.: 22537-1s1)

50 n.d.

Halogen-Brcmine (Br)(CAS No.r 10097-32-2)

50 n.d.

Halogen-lodine (l)(CAS No.i 14362-44-8)

50 n.d.

Note :1. mg/kg = ppm : 0.1wf/6 = 1o00ppm2. n.d. = Not Detected3. MDL = Method Detection Limit4 - " - "=No tRegu la led5. '" = Qualitative analysis (No unit)6. # = a. Positive means the presence of CrVl on the tested areas

b. Negative mgans the absence of C l on the tested areasThe dgteci€d concentration in boiling-lvater-ext€ction solution is equalor greaterthan 0.02 mg/kg with 50 cm,tested areas.

7. The sample(€) was/wer6 analyzed on behalfof the applicant as mixing sample in one testing. The above result(s)was^^/€re only giv€n as the informality value.

'nrhstar€Fnd€f ontrorbsmpq3)Idd rhEbd,etsn6ndbGComFny f l t r , l r i 9 ! r . , r l i ] l : r r ! l { : : l : : ; l i ' ! i : l j i A r i i F -5 ! , [ 1 ' e t r ; ' f ' , , ' l ] l t ) [ l i 1 'n3dumd ts6su6d ' l hscomtsny5u*db t csccond1 t r sds

sib iv 6 10 6 o er 5d b6 @mntft,ltrrsandd odd3undrth€ta mol & €pdud depr 'n ju r, ftd

+l r l *J l : r (+s610r ) re t7e f +sitlfuirL!{:,r rr ir: i - i.hsror IlF

Test Report No. : CE201'1/84950 OaL .2011h2,01 Pager 4

according to belo\ / flo /

POLYFILAGOBERALLMENDSTRASSE 2OA, CH63OO ZUG / SWITZERLAND

1) These sample6were da66olved totally by pre-conditioning methoda Cf' test method excluded )

Name of the pe6on who made measurement: Climbg€at YangName ofthe pe6on in charge of measurement: Troy Chang3)

ICP-AES

Sample Material Dige€tion Acid

S1eel, copper, aluminum, sold€r Aqua regia, HNO3, HCl, HF, HrO,

Glass HNO3/HF

cold, platinum, palladium, ceramic Aqua regia

Silver HNO3

Plastic H2SO1, HrOr, HNq, HCI

Othe.s Any acid to totral digestion

ii. irei,.or if *q oy t . cop-r " ,g .oo-maa"J ' * .6b i " - ' *dco^d ' * "6 .Edrcn ico@isbdM!os@]bi.*ddb" -'d l,nsdd 6 *,* i5r

*l iq:i";* @"* -;d.." **o.ooissr,s.ry - r"

"rd;^ a * -nd .

rtf:r:: r1lirtii+ 1l i s6 io,t,e tTe t r s lo:)2e 'r7 ffiar(om

Acid digestion by suitable aciddepended on difierent samplemderial (as belo\ , iable)

Micro\rave digestion with

HNO/HCVHF

Heat to appropriat€

temperature to e,\tract

Cool, filter digestate

through filter1) Alkal iFusion2) HCltodissolve

at 540 nm by UV-VIS

Test ReportPOLYFILAGOBERALLI\4ENDSTRASSE 2OA,

No. : CE2011184950 Oale'. 201 lh2lo1

CH43OO ZUG / SWITZERLAND

Page: 5 of 7

t l | l [ ] | | I t t | l

PBB/PBDE1) lllanE of the person2) MnE of the person

analytical FLOW cHARTwho nEde npasurenEnt: Ronran Wongin charge of nEasurenent Troy Chang

Scrcen analysis

" " " " " 1 " " " " " "

Sanple extraction/So*rlet rEthod

ConcentratdDiluteE)dracbd solution

First testing process -----t

Optional screen process -.--

Confinmtion process - .>

-s."pb---_-]--------r-------[S-r-tp]-j-a"arn"-_l-----r----

Ft ler

Analysis by GC/liS

cm€ry r r ' r j l j r ) t r . : r i l i " . : . l ! i * i , ; i i l ' r l t : e l . t i l : i l r t / . 1 \ ' l r Fn . r ' j : 1 . ' t l 6+

to €sd'o'c ramd dm6tu suq

d^t ,nd vihin rb rmis ot cr€d s i3'lbr.ohbadd€donsu.ddsera od b. repdued eiceol itul wiher

! idsnrzorNe-tu!acirrrer/*l:r/f,!.r +!!4J1i:irlre 02)r!e

I

Test ReportPOLYFIL AGOBERALLMENDSTRASSE

No. : CE/2011/84950 Daie | 2011h21O1

2OA. CH-6300 ZUG / SWITZERLAND

Analytical flow chart of halogen content

1) Name of the p€rson who lmde rneasuredEntr Rita Chen2) llan€ of the person in charge of nEasurerEdt: Troy Chang

Page: 6 of 7

comoad N]r]F,j!:ir.. I tiir lt{!l; ;]]rltl.1!- . r. irtsih-{} I 11 FiT . f!l r19i!+l

fi"JHl"l;liiii',i!',i.iwi;c"ry"';ti"-"c*""tc"t.^a sriu*-t i*n d..",; ''jbl.n bi... .d c.d*" 6, €. a " ' ' i i a - - o e , " a a . ^ * * ' ; . n b a d " i s d l b d i b m a i o ; d k . d h ;

; ; ; q ; ; ; ; oo ,4a t ; . : 6 . ? .€6@- -hsd ; "db . - "b1 .

r L - I I i d l L a i

Sarple pretreatrnent / Separation

Weighting and putting safipte in cell

Orygen Bomb Cofibustion / Absorption

Dilution to fixed volurne

Analysisw€s perfornEd by lC

Test Report No. : CE/2011/84950 D€te 2011h2101 Paget 7 of 7tl] tlt II][]lPOLYFILAG

OBEMLLMENDSTRASSE 2OA, CH63OO ZUG / SWITZERLAND

* The teeted sample / pa is maaked by an arrow if ifs shown on ih€ pholo. '

" End of Report -

€(s) r6rd Th€ r6d rop.n @nd b rccomtsry rirl,,iirar.rr'ir,'r,:111!!1, iilrRj:itr r.il1' l:!11.!-em+iI, ra r';)n:ll 'Thsih{.d"**dbylh6c"np.nysub'db6G4€Ejcond1bngo{sld ,M6.6al &dmsfu' sub]rendir,e'@ d ru d dbn s€s ibrh€! n reieds rhe cmp8.r's t ndn$ 3r rhe-y .d fu " t h " i . 6dc " " c ' * dDc . {5ny r ' j e cdnF i ys9s . s$;nshisandobroa,o3@do,rbta mdsrepd@sxepr'nlu.wM,sio,MtenaFro!3 drhecompanv a

Intertek Testing Services Ltd., ShanghaiTFH Division Block B, Jinling Business Square,No.801 Yi Shan Road, Shanghai, China, 200233 Tel: +86 21 6120 6565 Fax: +86 21 6127 9740 www.intertek.com www.intertek.com.cn China Toll-Free: 800 999 1338

TEST REPORT NUMBER: SHAH00300774

PREPARED AND CHECKED BY: AUTHORIZED BY: FOR INTERTEK TESTING SERVICES FOR INTERTEK TESTING SERVICES LTD., SHANGHAI LTD., SHANGHAI

MYRA LV JACOB LIN CHEMICAL LAB SENIOR MANAGER GENERAL MANAGER

PAGE 1 OF 7

APPLICANT: LITTELFUSE,INC. DATE: FEB 02, 2012 800 E. NORTHWEST HWY ATTN: A. CESISTA/ K. BACILA

SAMPLE DESCRIPTION: One(1) submitted sample said to be Wire with plating. Part Description : Wire(Elschukon). Part Number : 004206. Date Sample Received : Jan.17, 2012. Date Test Started : Jan.17, 2012. ***********************************************************************

TESTS CONDUCTED: AS REQUESTED BY THE APPLICANT, FOR DETAILS REFER TO ATTACHED PAGE(S)

**********************************************************************TO BE CONTINUED



TESTS CONDUCTED

PAGE 2 OF 7

(Ⅰ) Test Result Summary :

Result (ppm) Testing Item

(1)

Heavy Metal

Cadmium (Cd) content ND Lead (Pb) content 20 Mercury (Hg) content ND Chromium VI (Cr6+) content (mg/kg with 50cm2)

Negative (< 0.02)(#)

Result (ppm)

Testing Item (2)

Heavy Metal

Cadmium (Cd) content/PLATING ND Lead (Pb) content/PLATING 238 Mercury (Hg) content/PLATING ND Chromium VI (Cr6+) content (mg/kg with 50cm2)/PLATING


Tested components:

(1) Substrate (2) Plating

Remarks: ppm = Parts per million = mg/kg ND = Not detected # = Due to the insufficient sample area, reduced total

sample surface of 10 cm2 was used and the dilution factor was adjusted accordingly.

mg/kg with 50cm2 = milligram per kilogram with 50 square centimetre

Negative = A negative test result indicated positive observation was not found at the time of testing.

Responsibility Of Chemist :Dent Fang / Ken He **********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 3 OF 7

(Ⅱ) RoHS Requirement: Restricted Substances Limits Cadmium (Cd) Content 0.01% (100ppm)Lead (Pb) Content 0.1% (1000ppm)Mercury (Hg) Content 0.1% (1000ppm)Chromium VI (Cr6+) Content 0.1% (1000ppm)Polybrominated Biphenyls (PBBs) 0.1% (1000ppm)Polybrominated Diphenyl Ehters (PBDEs) 0.1% (1000ppm)

The above limits were quoted from 2002/95/EC and amendment 2005/618/EC for homogeneous material. **********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 4 OF 7

(Ⅲ) Test Method:

Testing Item Testing Method Reporting Limit

Cadmium (Cd) content

With reference to IEC 62321 edition 1.0:2008 in clause 8/9/10, by microwave digestion until the tested samples are totally dissolved and determined by ICP-OES.

2 ppm

Lead (Pb) content


2 ppm

Mercury (Hg) content

With reference to IEC 62321 edition 1.0:2008 in clause 7, by microwave digestion until the tested samples are totally dissolved and determined by ICP-OES.

2 ppm

Chromium VI (Cr6+) content

With reference to IEC 62321 edition 1.0:2008 in annex B, by boiling water extraction and determined by UV-Vis spectrophotometer.

0.02 mg/kg with

50cm2

Remark: Reporting limit = Quantitation limit of analyte in sample

Date Sample Received :JAN.17, 2012 Testing Period :JAN.17, 2012 TO JAN.21, 2012 **********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 5 OF 7

(Ⅳ) Measurement Flowchart:

Test For Cd/Pb/Hg/Chromium (VI)/PBBs/PBDEs Contents Reference Standard: IEC 62321 edition 1.0:2008

**********************************************************************TO BE CONTINUED

sampling/grinding or cutting

weigh sample and for different

material, digest the sample with

make up with deionized water

Cd/Pb/Hg

analyzed by ICP-OES

weigh sample and add alkaline solution

definite temp.

make up with deionized water and add diphenyl-

carbazide solution

Cr6+

weigh sample and add organic

soxhlet extraction or

solvent extraction

concentrate the extract and make up with organic

PBBs/PBDEs

analyzed by UV-VIS

analyzed by GC-MSD

spot test

get 50cm2 samples

boiling water extraction

metalpolymers / electronics

negative*2confirm the tested samples are totally

dissolved No

cool and filter the extract



TESTS CONDUCTED

PAGE 6 OF 7

REMARKS:

*1: List of appropriate acid： Material Acid added for digestion

Polymers HNO3,HCl,HF,H2O2,H3BO3 Metals HNO3,HCl,HF Electronics HNO3,HCl,H2O2,HBF4

*2: If the result of spot test is positive, Chromium VI would be determined as detected.

**********************************************************************TO BE CONTINUED



TESTS CONDUCTED

PAGE 7 OF 7

**********************************************************************

END OF REPORT




MYRA LV JACOB LIN CHEMICAL LAB SENIOR MANAGER GENERAL MANAGER

PAGE 1 OF 6

APPLICANT: LITTELFUSE,INC. DATE: FEB 02, 2012 800 E. NORTHWEST HWY ATTN: A. CESISTA/ K. BACILA

SAMPLE DESCRIPTION: One(1) submitted sample said to be Wire with plating. Part Description : Wire(Polyil). Part Number : 687279-001. Date Sample Received : Jan.17, 2012. Date Test Started : Jan.17, 2012. ***********************************************************************


*********************************************************************** To Be Continued



TESTS CONDUCTED

PAGE 2 OF 6

(Ⅰ) Test Result Summary :


(1)

Heavy Metal

Cadmium (Cd) content ND Lead (Pb) content ND Mercury (Hg) content ND Chromium VI (Cr6+) content (mg/kg with 50cm2) Negative (< 0.02)(#)

Result (ppm)

Testing Item (2)

Heavy Metal

Cadmium (Cd) content/Plating ND Lead (Pb) content/Plating 72 Mercury (Hg) content/Plating ND Chromium VI (Cr6+) content (mg/kg with 50cm2)/Plating


Tested components:

(1) Substrate (2) Plating

Remarks: ppm = Parts per million = mg/kg ND = Not detected # = Due to the insufficient sample area, reduced total

sample surface of 10 cm2 was used and the dilution factor was adjusted accordingly.

mg/kg with 50cm2 = milligram per kilogram with 50 square centimetre

Negative = A negative test result indicated positive observation was not found at the time of testing.

Responsibility Of Chemist :Dent Fang / Ken He

Date Sample Received :Jan.17, 2012 Testing Period :Jan.21, 2012 ***********************************************************************

To Be Continued



TESTS CONDUCTED

PAGE 3 OF 6


The above limits were quoted from 2002/95/EC and amendment 2005/618/EC for homogeneous material.

(Ⅲ) Test Method:




2 ppm

Lead (Pb) content


2 ppm



2 ppm


With reference to IEC 62321 edition 1.0:2008 in annex B, by boiling water extraction and determined by UV-Vis spectrophotometer.

0.02 mg/kg with

50cm2

Remark: Reporting limit = Quantitation limit of analyte in sample ***********************************************************************

To Be Continued



TESTS CONDUCTED

PAGE 4 OF 6



*********************************************************************** To Be Continued





Cd/Pb/Hg

analyzed by ICP-OES


definite temp.


carbazide solution

Cr6+



solvent extraction


PBBs/PBDEs

analyzed by UV-VIS

analyzed by GC-MSD

spot test

get 50cm2 samples




dissolved No




TESTS CONDUCTED

PAGE 5 OF 6

REMARKS: *1: List of appropriate acid：

Material Acid added for digestion


*2: If the result of spot test is positive, Chromium VI would be determined as detected.

*********************************************************************** To Be Continued



TESTS CONDUCTED

PAGE 6 OF 6

***********************************************************************

End Of Report




MYRA LV STEPHEN TSANG CHEMICAL LAB SENIOR MANAGER GENERAL MANAGER

PAGE 1 OF 9

APPLICANT: LITTELFUSE,INC. DATE: JAN 18, 2012 800 E. NORTHWEST HWY ATTN: A. CESISTA/ K. BACILA

SAMPLE DESCRIPTION: One(1) submitted sample said to be White yarn. Part Description : YARN. Part Number : 648901. Date Sample Received : Jan.11, 2012. Date Test Started : Jan.11, 2012. ***********************************************************************


**********************************************************************TO BE CONTINUED



TESTS CONDUCTED

PAGE 2 OF 9

1 (I) Test Result Summary :

Testing Item Result (ppm)

Halogen Content Fluorine (F) 820 Chlorine (Cl) ND Bromine (Br) ND Iodine (I) ND

Remarks: ppm = Parts per million based on weight of tested sample =

mg/kg ND = Not detected

Responsibility Of Chemist :Ken He

(II) Test Method:


Halogen Content With reference to EN 14582:2007 by combustion flask with oxygen and determined by ion chromatography

50 ppm

Remark: Reporting limit = Quantitation limit of analyte in sample **********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 3 OF 9

(III) Measurement Flowchart:

Test For Halogen Content Reference Standard： EN 14582

**********************************************************************TO BE CONTINUED

add absorbent in a combustion flask & place weighed sample in equipment

fill the combustion flask with oxygen

ignite then leave the flask at room temperature

transfer the absorbent into a volumetric flask



analyzed by ion chromatography



TESTS CONDUCTED

PAGE 4 OF 9

2 (I) Test Result Summary :


Heavy Metal

Cadmium (Cd) content ND Lead (Pb) content ND Mercury (Hg) content ND Chromium VI (Cr6+) content ND

Polybrominated Biphenyls (PBBs) Monobrominated Biphenyls (MonoBB) ND Dibrominated Biphenyls (DiBB) ND Tribrominated Biphenyls (TriBB) ND Tetrabrominated Biphenyls (TetraBB) ND Pentabrominated Biphenyls (PentaBB) ND Hexabrominated Biphenyls (HexaBB) ND Heptabrominated Biphenyls (HeptaBB) ND Octabrominated Biphenyls (OctaBB) ND Nonabrominated Biphenyls (NonaBB) ND Decabrominated Biphenyl (DecaBB) ND

Polybrominated Diphenyl Ethers (PBDEs) Monobrominated Diphenyl Ethers (MonoBDE) ND Dibrominated Diphenyl Ethers (DiBDE) ND Tribrominated Diphenyl Ethers (TriBDE) ND Tetrabrominated Diphenyl Ethers (TetraBDE) ND Pentabrominated Diphenyl Ethers (PentaBDE) ND Hexabrominated Diphenyl Ethers (HexaBDE) ND Heptabrominated Diphenyl Ethers (HeptaBDE) ND Octabrominated Diphenyl Ethers (OctaBDE) ND Nonabrominated Diphenyl Ethers (NonaBDE) ND Decabrominated Diphenyl Ether (DecaBDE) ND

**********************************************************************TO BE CONTINUED



TESTS CONDUCTED

PAGE 5 OF 9

Remarks: ppm = Parts per million = mg/kg ND = Not detected


(II) RoHS Requirement:

Restricted Substances Limits Cadmium (Cd) Content 0.01% (100ppm)Lead (Pb) Content 0.1% (1000ppm)Mercury (Hg) Content 0.1% (1000ppm)Chromium VI (Cr6+) Content 0.1% (1000ppm)Polybrominated Biphenyls (PBBs) 0.1% (1000ppm)Polybrominated Diphenyl Ehters (PBDEs) 0.1% (1000ppm)


TO BE CONTINUED



TESTS CONDUCTED

PAGE 6 OF 9

(III) Test Method:




2 ppm

Lead (Pb) content


2 ppm



2 ppm


With reference to IEC 62321 edition 1.0:2008 in annex C, by alkaline digestion and determined by UV-Vis spectrophotometer.

1 ppm

Polybrominated Biphenyls (PBBs)

With reference to IEC 62321 edition 1.0:2008 in annex A, by solvent extraction and determined by GC-MSD and further HPLC confirmation when necessary.

5 ppm

Polybrominated Diphenyl Ethers (PBDEs)


5 ppm

Remark: Reporting limit = Quantitation limit of analyte in sample

DATE SAMPLE RECEIVED : JAN.11, 2012 TESTING PERIOD : JAN.11, 2012 TO JAN.13, 2012

**********************************************************************TO BE CONTINUED



TESTS CONDUCTED

PAGE 7 OF 9

(IV) Measurement Flowchart:


**********************************************************************

TO BE CONTINUED





Cd/Pb/Hg

analyzed by ICP-OES


definite temp.


carbazide solution

Cr6+



solvent extraction


PBBs/PBDEs

analyzed by UV-VIS

analyzed by GC-MSD

spot test

get 50cm2 samples




dissolved No




TESTS CONDUCTED

PAGE 8 OF 9

REMARKS:

*1: List of appropriate acid： Material Acid added for digestion Polymers HNO3,HCl,HF,H2O2,H3BO3 Metals HNO3,HCl,HF Electronics HNO3,HCl,H2O2,HBF4

*2: If the result of spot test is positive, Chromium VI would be determined as detected. **********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 9 OF 9

**********************************************************************

END OF REPORT





PAGE 1 OF 15

APPLICANT: LITTELFUSE,INC. DATE: JAN 18, 2012 800 E. NORTHWEST HWY ATTN: A. CESISTA/ K. BACILA

SAMPLE DESCRIPTION: One (1) submitted sample said to be Orange Liquid. Part description : FLUX. Part number : 195116. Date sample received : Jan.11, 2012. Date test started : Jan.11, 2012. ***********************************************************************


*********************************************************************** TO BE CONTINUED





PAGE 2 OF 15

CONCLUSION:

TESTED SAMPLE/ COMPONENT

STANDARD RESULT

TESTED COMPONENT OF SUBMITTED SAMPLE

PHTHALATES CONTENT REQUIREMENT IN ANNEX XVII ITEMS 51 & 52 OF THE REACH REGULATION (EC) NO. 1907/2006 & AMENDENT NO.552/2009(FORMERLY KNOWN AS DIRECTIVE 2005/84/EC)

PASS

TESTED SAMPLE/COMPONENT STANDARD RESULT

TESTED COMPONENT OF SUBMITTED SAMPLE

US CONSUMER PRODUCT SAFETY IMPROVEMENT ACT 2008 TITLE I, SEC 108 REQUIREMENT ON PHTHALATES

PASS

**********************************************************************

**********************************************************************



TESTS CONDUCTED

PAGE 3 OF 15

1 PHTHALATE CONTENT TEST

WITH REFERENCE TO EN14372, BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) ANALYSIS.

LIMIT(%,W/W) TESTED COMPOUND RESULT (%,W/W)

(MAX.) DIBUTYL PHTHALATE (DBP) ND --- DI(2-ETHYL HEXYL) PHTHALATE(DEHP) ND --- BENZYL BUTYL PHTHALATE (BBP) ND ---

SUM OF THREE PHTHALATES ND 0.1

REMARK：THE ABOVE LIMIT WAS QUOTED ACCORDING TO ANNEX XVII ITEMS 51 & 52 OF THE REACH REGULATION (EC) NO. 1907/2006 & AMENDENT NO.552/2009 (FORMERLY KNOWN AS DIRECTIVE 2005/84/EC) FOR PHTHALATE CONTENT IN TOYS AND CHILDREN CARE ARTICLES.

DETECTION LIMIT = 0.01%(W/W) ND = NOT DETECTED

*********************************************************************** TO BE CONTINUED



TESTS CONDUCTED

PAGE 4 OF 15

2 (Ⅰ) Test Result Summary :


Halogen Content Fluorine (F) ND Chlorine (Cl) 8200 Bromine (Br) ND Iodine (I) ND

Remarks: ppm = Parts per million based on weight of tested sample =

mg/kg ND = Not detected

Responsibility Of Chemist :Ken He

(Ⅲ) Test Method:


Halogen Content With reference to EN 14582:2007 by combustion flask with oxygen and determined by ion chromatography

50 ppm

Remark: Reporting limit = Quantitation limit of analyte in sample **********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 5 OF 15



**********************************************************************TO BE CONTINUED










TESTS CONDUCTED

PAGE 6 OF 15

3 (Ⅰ) Test Result Summary :


Heavy Metal

Cadmium (Cd) content ND Lead (Pb) content ND Mercury (Hg) content ND Chromium VI (Cr6+) content ND

Polybrominated Biphenyls (PBBs) Monobrominated Biphenyls (MonoBB) ND Dibrominated Biphenyls (DiBB) ND Tribrominated Biphenyls (TriBB) ND Tetrabrominated Biphenyls (TetraBB) ND Pentabrominated Biphenyls (PentaBB) ND Hexabrominated Biphenyls (HexaBB) ND Heptabrominated Biphenyls (HeptaBB) ND Octabrominated Biphenyls (OctaBB) ND Nonabrominated Biphenyls (NonaBB) ND Decabrominated Biphenyl (DecaBB) ND

Polybrominated Diphenyl Ethers (PBDEs) Monobrominated Diphenyl Ethers (MonoBDE) ND Dibrominated Diphenyl Ethers (DiBDE) ND Tribrominated Diphenyl Ethers (TriBDE) ND Tetrabrominated Diphenyl Ethers (TetraBDE) ND Pentabrominated Diphenyl Ethers (PentaBDE) ND Hexabrominated Diphenyl Ethers (HexaBDE) ND Heptabrominated Diphenyl Ethers (HeptaBDE) ND Octabrominated Diphenyl Ethers (OctaBDE) ND Nonabrominated Diphenyl Ethers (NonaBDE) ND Decabrominated Diphenyl Ether (DecaBDE) ND

**********************************************************************TO BE CONTINUED



TESTS CONDUCTED

PAGE 7 OF 15

Remarks: ppm = Parts per million = mg/kg ND = Not detected




TO BE CONTINUED



TESTS CONDUCTED

PAGE 8 OF 15

(Ⅲ) Test Method:




2 ppm

Lead (Pb) content


2 ppm



2 ppm


With reference to IEC 62321 edition 1.0:2008 in annex C, by alkaline digestion and determined by UV-Vis spectrophotometer.

1 ppm

Polybrominated Biphenyls (PBBs)


5 ppm

Polybrominated Diphenyl Ethers (PBDEs)


5 ppm

Remark: Reporting limit = Quantitation limit of analyte in sample ***********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 9 OF 15



**********************************************************************

TO BE CONTINUED





Cd/Pb/Hg

analyzed by ICP-OES


definite temp.


carbazide solution

Cr6+



solvent extraction


PBBs/PBDEs

analyzed by UV-VIS

analyzed by GC-MSD

spot test

get 50cm2 samples




dissolved No




TESTS CONDUCTED

PAGE 10 OF 15

REMARKS:

*1: List of appropriate acid： Material Acid added for digestion


*2: If the result of spot test is positive, Chromium VI would be determined as detected. **********************************************************************

TO BE CONTINUED



TESTS CONDUCTED

PAGE 11 OF 15












TESTS CONDUCTED

PAGE 12 OF 15

4 PHTHALATE CONTENT TEST

WITH REFERENCE TO ASTM D3421, BY GAS CHROMATOGRAPHY-MASS

SPECTROMETRY (GC-MS) ANALYSIS.

RESULT (%, w/w) LIMIT (%, w/w) (MAX.) DIBUTYL PHTHALATE (DBP) ND 0.1 DI(2-ETHYL HEXYL) PHTHALATE (DEHP) ND 0.1 BENZYL BUTYL PHTHALATE (BBP) ND 0.1

REMARK：THE ABOVE LIMIT WAS QUOTED ACCORDING TO US CONSUMER

PRODUCT SAFETY IMPROVEMENT ACT 2008 FOR PROHIBITION ON SALE OF CERTAIN PRODUCTS CONTAINING SPECIFIED PHTHALATES.

DETECTION LIMIT = 0.01% (w/w) ND = NOT DETECTED

*********************************************************************** TO BE CONTINUED



TESTS CONDUCTED

PAGE 13 OF 15

MEASUREMENT FLOWCHART: TEST FOR PHTHALATES CONTENTS

*********************************************************************** TO BE CONTINUED

Weigh sample and place in a thimble

Extracted by Soxhlet extraction with organic solvent

Concentrate the extract

Analyze by GC-MSD

Make up with organic solvent

Transfer the extract into a volumetric flask



TESTS CONDUCTED

PAGE 14 OF 15

5 TEST RESULT SUMMARY:

TESTING ITEM RESULT(ppm)

HBCD (HEXABROMOCYCLODODECANE) ND

REMARKS: ppm = PARTS PER MILLION = mg/kg ND = NOT DETECTED (B) TEST METHOD :

TESTING ITEM TESTING METHOD REPORTING

LIMIT

HBCD (HEXABROMOCYCLODODECANE)

WITH REFERENCE TO USEPA 3540C, BY SOLVENT EXTRACTION AND DETERMINED BY GC/MS

10 ppm

DATE SAMPLE RECEIVED : JAN.11, 2012 TESTING PERIOD : JAN.11, 2012 TO JAN.16, 2012

*********************************************************************** TO BE CONTINUED



TESTS CONDUCTED

PAGE 15 OF 15

***********************************************************************

END OF REPORT

Test R€port No. SHAEC1216714750 Date: 25 Sep 2012 Page 'l ofsZHEJIANG ASIA GENERAL SOLDERING&BRAZING MATERIAL CO., LTDXIHU INDUSTRIAL PARK, SANDUN, HANGZHOU CITY, ZHEJIANG, PROVINCE, CHINA

Thg following sample(s) was/were submitted and identifed on beharf of the dients as : LEAD-FREE soLDERWIRE

SGS Job No. :Part No. (P/N) :Composition :Date of Sample Received :Testing Period :Te6t Requested :

Test Method :

Test Results :Conclusion :

sP12-028285 - SHYTWl02 (692s39-002)

Sn2.0CuRE21 9ep 2012

21 Sep 2012 - 25 Sep 2012Selected test(s) as requested by dient.Please refer to next page(s).

Please ref€r to ne\4 page(s).

Based on the performed tests on submitted samples, lhe results of Lead,Mercury, Cadmium, Hexavalent cfiromium, polybrominated biphenyls (pBB),Polybrominated diphenylethe6 (PBDE) compty with the timib as set by RoHSDireclive 2011/6yEU Annex ll; recasting 2OO2|95/EC.

k'{l efir C.nddd.l6.rno odd- osLd, w.r.l'lr 6Mnd kt n lle u! a.Ddr'rE iq Eldimo o.uffi . w*dh,|od ..d..llfu.h-.Aldfiriirmr;iitrffia

!l|dn. rry ndr..rttr' rtr'eddr d*dihndofidd

Signed for and on b€half ofscs-cgTc Ltd.

,z?r"'-Fan Jinqjie, JJApproved Sign€tory

rhb d@Dnr b rFr.c |r nr

. t4. rn corulrr * d..qrb ri.blFondnnr

ry bh rmpr.(r, rnbd .

mh|trllltflunarl&i'.9ilob 2o@qfl'I|.*f,61'|r|db+3*ll fi:M

tn€Fa)filG60lEEiE-ArOSI9 *n.nrslcdnrllj{E-ar)6140,,0a tt{fi-21l6ao@ .tdir&lilcn

Man!6r or rh€ sqs olo!! (scs sA)

Test Report No. SHAEC1216714750 Date: 25 Sep 201 2 Page 2 of 5Test Results :

Test Part Desciiotion :

Sp€oim€n llo. SGS Sampl€ lD Dcc,ipdon1 SHA12-167147.043 Sitvery wire

RemarlG :(1) 1 mgftg= 1 PPm=0.0001%(2) IVDL = Method Detedion Limit(3) ND = Not Detected ( < l\4DL )(4) "-" = Not Regulated

RoHS Dir€divo 201 1/85/EU

Test l\rethod: With referenc€ to IEC 6232'1:2008(1) Determination ofCadmium by ICP-OES.(2) Determination of Lead by tCp-OES.(3) Determination of Mercury by |CP-OES.(4) Determination of Hexavalent Chromium by Spot test / Cotodmetric Method using UV-Vis.(5) Determination of PBBS / PBDES by GC-MS.

Te6t ltem(s)

Cadmium (Cd)

Lead (Pb)Mercury (Hg)Hexavalenl Chromium (Cr(Vl))Sum of PBBSMonobromobiphenylDibromobiphenylTribromobiphenylTetrabrcmobiphenylPentabromobiphenyl

HeptabromobiphenylOclabromobiphenylNonabromobiphenylDecabromobiphenylSum of PBDESMonobromodiphenyl ether

!!!it Ud!10O mS/kS1000 mSikg1To 'nT

1000 mdkg- mgKg

mgKg- mgKg- mgKg- mg/Kg

ms/Ksmg/Kgmg/KgmS/kS

- mgKs1000 mdkS

- meyKg

l\4DL @32 N D2 1682 N DO Negative- N D

5 N D5 N D5 N D5 N D5 N D5 N D5 N D5 N D5 N D5 N D- N D

5 N D

rn .dothr,$rLbhdtuFl

i'drbdn'l''hcd'c'|i&dcmdr.& qi.r rdta dsn-r dnr ncr .|'ld Fdr b. hnr.dmm.rr.ddaDlhMllln.d'lddtl.'

c!dr-/. ndhl. .rtrrhd

h dr hi rPd Dt' cir b,h. rm, .b, hro .

.mb.r ol rh. scs Goup {8Gs€ }

t'inr$r$fedrdrr6nl,gEidaorr 2o@3]+l..t.t.lr6ldrl33oClstn ll:M

lElE{S-Al6ia02563lElEls-a!ffiIg 9w.64a.mrL{6-nl6|102ra rrlr{6-?r)5ae3 .€.d't!0.tM

Test ReportTest ltem(s)

Dibromodiphenyl etherTribromodiphenyl etherTetrabromodiphenyl etherPsntabromodiphenyl elherH€xabromodiphenyl etherHeptabromodiphenyl etherOctabomodiphenyl etherNonabromodiphenyl elherDecabromodiphenyl ether

No. SHAEC1216714750 Datei 25 Sep 2012 Page 3 of 5

Lldl udtms/Ksmg/Kgmg/rgmS/kgmg/Kgmg/Kgmg/Kgm9Kgmdkg

upt555555555

a3NDN DN DN DNDNDNDNDNO

Notes :(1) The maximum permissible limit is quoted from directive 201 1/65/EU, Annex ll(2) "spottest:

Negative = Abs€nce of Cr(Vl) coating, Positive = Presence of Cr(Vt) coating;Cfhe tested sample should be further vedfied by boiling-wateFextraction method if the spot test resultis Negative or cannot be confirmed,)o Boiling-wateFextraction:Negative = Absence of Cf(Vl) coatingPosilive = Presence of Cr(Vl) coating; the detected concenhation in boiling-water-extraclion solution isequal or greater than 0.02 mg/kg with 50 cm. sample surtac€ area.For@rosion protection coalings on metals: Infofmation on sto€ge conditions and production date ofthe tested sample is unavailable and thus results of Cr(Vl) represent status ofthe sample at the timeof testing.

n6.hffi hft *4dntuorrbrh rrh..(.)r-rd.

f 6illselb'b.dld$0|..dlirdtqrr @lFt.-Ll.*tr6ltl€o!l6r}| l|:a@3

TE EFZT)tll66! IBEFA)6*$,D w6|a.MHr (a-at614qer Hj F-a)fl@l . ttdhl&s@

M.m!.t ol rhs aGs ololp (aag sA)

Test ReDort No. SHAEC1216714750 Date: 25 Sep 2012 Page 4 of 5

rn. .@md I h.!d byri.6oF / E[i-r b r. ord codl|dr oi se -.,r!!5ffi tu &mil&hFd b rm. rn c.dtu k d r.{dMrffi.

n6.hffi 6dr bdnFdrhci,rb'brn!.h,'orc

ATTACHMENTS

RoHS Tesflng Ftow Chart1) Name of the person who made testing: Jan Shi^/oyo Wangr'A en Xao,cary Xuz) N€me or tne person in charge of testing: Jeff Zhang/ceorge Xu/ Linda Lir) Inese sampres w€re dissotved tota v bv ore-conditioning method according to belowflow chart. (Cr6'and PBBS/PBDES test method exctudedi

ratUlle.|lrto tr.hrt*€rthccfar zci@33+l..ti.tiEEtufta9+sltt tt: 2r@s

lElE(6?r)6140at63tE!Et6{l)0'tE17t m.6r€..mEtB-?)6r102r1 iL(ri-?r)A!G3 .tasr'..Cc.6

Pb/Cd/Hg PBBs/PBDEs

Acid digestion withmicrowave/ hotplate Nonmetallic

matedal

1) Alkali Fusion /DryAshing

2) Acid to dissolve Filtration and pHadjustment

Adding 1,5-diphenylc€rb€zide

for colordevelopment

Addang 1,5-diphenylcarbazide


A red colorindicatesthe

pre6ence of cr6*. lfnecess€ry,confirm with

rd.r[f,t Ddod@nFr!. Thb drsrud d!.r b.6rmdr..d *ror 6 nrr,$,l.d N.ris,.4jwr d tn.c.ffiv

Urmllr ol |h. AgA elou! (gGS SA)

Test Report

Sample photo:

No. SHAEC1216714750 Date:25 Sep 2012 Page 5 of 5

sHA12-167147.043

SGS authenticate the photo on original report only

"' End of Report "*

tt-!,ruaYanbrrrr&id,$.'icti 2tEf3+r'rr.*Jr8ltlsae'{33|t 3L M

tErEF.e0E @ rEtE16*r)af5rr9Hj{t-aldlML fU0SAl)64e0

lrom!.r ol rh.8og Group (8G€S )

T€st Report No. SHAEC1216714738 Date: 25 Sep 201 2 Page 1 ol5

ZHEJIANG ASIA GENERAL SOLDERING&BRAZING MATERIAL CO., LTD

XIHU INDUSTRIAL PARK, SANDUN, HANGZHOU CIry' ZHEJIANG, PROVINCE' CHINA

The following 6ample(s) was/were submitted and identified on behalf of the clients as : LEAD-FREE SoLDER

WIRE

SGS Job No. :

Part No. (PN) :

Compositlon :

Date of Sampl€ Received :

Testing Period :

Test R€quested :

Test Method :

T€st Resulb :

Condusion :

Signed for and on b€half ofscs-csTc Ltd.

sP12-028285 - SH

YTW2O6

sno.3Ag0.7ouce

21 Sep 2012

21 s,ep 2012 - 25 SeP 2012

Selected test(s) as requested by client

Please refer to next Page(s)

Please refer to next Page(s).Baa€d on the perfomed tests on submitted samples' the results of Lead'I\rercury, Cadmium, Hexavalent chomium, Polybrorninated biphenyls (PBB)'

Polybrominated diphenyl ethe6 (PBDE) comply with the limits as set by RoHS

Di.ective 201 1/65/EU Annex ll; recasting 200295/EC

/Qv''Fan Jingiie, JJApproved Signatory

.n#ffiffiirmr r* u-ra -td *vot rmrr.t.t t*

tirtDafi$EE|ihtltrorr zxtaoil.t.|.*f,Ertr€€.lt$l ll@3

tErEl@llitldt6!E{ti"clt06t'9 ffior*ofrxr.c+rti el Kr(,-tt)Eaffi 1j!ltor-

iLnlirotllt SOS Otbt4 (aGS 8A)

T€6t Report

Test Results :

Test Pert De€criotion ;

S@rn6n No, SGS Sampl€ lD D6ctiptioi1 SHA12-167147.035 Silvery wire

Rgmarks :(1) 1 mg/kg= I PPm=00001%(2) MDL = Method Deteclion Limit

(3) ND = Not D€teded ( < lrDL )(4) '-' = Not Regulated

RoHS DllBdivs 201 l/85/EU

Test Llethod

No. SHAEC1216714734 Date: 25 Sep 2012 Page 2 o15

with reference to lEc 6232 1 :2008(1) Determination of cadmium by ICP-oEs.(2) Dete.mination of Lead by ICP-oEs(3) Determination of Mercrlry by ICP-OES.(4) Determination of Hexavalent Chromium by Spot test / Colorimetric l\,ethod using UV-Vis(5) Detemination of PBBS i PBoES by GC-[IS.

Test ltem{s)

Cadmium (Cd)

Lead (Pb)

Mercury fig)Hexavalent Chromium (Ci(VD)

Sum of PBBSMonobromobiphenylDibromobiphenylTribromobiph€nylTetrabrornobiphenylPentabromobiPhenYlHe/€bromobiphenylHeptabromobiPhenylOctabromobiphenylNonabromobiPhenylDecabromobiPhenYlSum oI PBDESMonobromodiphenyl ether

Limit UlE l\rDL

100 mdkg 2

1000 ms/kg 2

1000 ms/kS 2o

1000 mS.ftS- mS/kS 5- mdkg 5- mdkS s- mSikS 5- mdks 5- ms/kg 5- mg/kg 5- mdkS 5- msikg 5- mdks 5

1m0 mgftS- mg/KS 5

Ij*tffib D.r. na co{d6 *r I ffi*,Hffi !#,g;"EHT* ###f g"fff ffi Stift Ufiffiffi:ffiSffi *ff rffi #ffi*,rx*$'#'ffi *lvl*sm.1m*ts""nr*

ND50ND

N€gativeNDNDNDNDNDNDNDNDNDNDNDNDND

;;bii*hEni-.6fr d tbtk r6tr.{.)r-H

tt-ErrlFYasft.cxd|lt.9|dlcrn zfrlr3 rd€6+1)6r.@ tElEF{lF6tlHit!-2l164@raa it{&aFl@+l -l|.*tr[lt|fte||6+l lr:2@

lr.nD.t o1$.8Gg OrouP (8cgs )

Tes{ Report

Test ltem(s)Dibromodiphenyl etherTribromodiphenyl etherTetrabromodiphenyl etherPentabromodiphenyl elherHexabromodiphenyl etherHeptabromodiphenyl etherOc-tabromodiphenyl etherNonabro.nodiphenyl etherD€cabromodiphenyl ether

thi!

t'ilt,b.aYrbto drchrbrd,Swaon !e3a+1

No. SHAEC1216714738 Date: 25 Sep 2012

UdT MDt @mdkS 5 NDmdkS 5 NDmdkS 5 NDmdkg 5 NOmS/kg 5 NDmSikS 5 NDmg/kg 5 NDmS/kS 5 NDmgkg 5 ND

I ErE {O-Zr)OtrOO*FA)ala@!.a

Page 3 of 5

raEFaFffiTl|{j{l.?J)6r@

Notes :(1) The maximum permissible limit is quoted from diredive 2011/65/EU, Annex ll(2) ospot{est:

Negative = Absence of Cr(Vl) coating, Positive = Presence of Cr(Vl) coating;CIhe tested sample should be fudher verifed by boiling-waterextraction method if the spot test resultis Negative or cannot be confirmed.)oBoiling-wateFextraction:Negative = Ahsence of Cr(Vl) coatingPositive = Pesence of Cr(Vl) coating; the detected concentration in boiling-water-ext€ction solution isequal or greater than 0.02 mgl(q with 50 cm'z sample surtace area.For corrosion protection coatings on metals: Information on storage conditions and produclion date ofthe tested sample is unavailable and thus results of Cr(Vl) represent status of lhe sample at the timeof testing.

M.m!.rorh.scsGtuc(acgs )

Test Report No. SHAEC1216714734 Date: 25 S€p 2012 Page 4 of 5

' l ' ;-;Ltidbd$rffi '-d6.h*lhE.,nrdri*6

ATTACHMENTS

RoHS Te€ting Flow Chart

1) Name of the person who madetesting: Jan Shi/Yoyo Wang/Allen Xiao/Gary xu2i Name of the berson in charge of testing: Jeff Zhang/George Xu/ Linda Liiiiii,"i !!rir!!,i. aissoried totarry 6'y pre-condit-roningherhod accorcting to berowflow chart. (Cf

'

and PBBdPBDES test method excluded)

tr

Sample Prcparation

Sample Measurement

Acid digestion withmicrow€ve/ hotplate

Concentration/Dilution of extraclion

solution

'1) Alkali Fusion /DryAshing

2) Acid to dissolve

Adding 1,sdiphenylcarbazide


A red colorindicatesthe

presence of cP'.neceas€ry,confirm with

Pbrcd,Hg PB86fPBDE8

tilairl$gYb.rto dErloat4ltrtracnr 20(43fl..tjt.*Iqldl|6els+l a|lM

rEtE Fzr)0tac53l+{a-a)dlqaa

rE&&4lrsartjF.?1)6@

$6nb.fol th.ao6 GlDlD {8oas )

Test Report

Sample photo:

No. SHAECl2'16714738 Date: 25 Sep 201 2 Page 5 of 5

sHA12-167147.035

SGS authenticato the photo on original report only'* End of Report ""

(d-l!r. .Dor d6.ccil-iibhihr.ldcn.h,

' | l ! !a|i!!{ l |ddbd',td.lwb|||d4ded

tLlliDl! Bftfiufition 2dEs rElE[6-eDdag6l lElfF2l!ffia *6r*.&rr{&a1}ara@a ttF+lFN .,9d'rt.l.-tr.tl.*tr6l||,|rF|6r+l ll: @3

l|.fiDcrolm. SOS Gtu,D |SOSS ]

nov'TEST REPORT

NO.:4002E11121307-2R02 Oa!aiDec15,2o11 page 1 of4

Customer: Suzhou FuHong Electrcnic IndustfialCo, Ltd.Addrgs8: NO.89WEl DU ROAD, WANGTING TOWN, XTANGCHENG D|STR|CT, SUZHOU, CHTNAReport on th6 3ubmitted ssmple said io beSample name: Fusos copper shellllodol: /

Material: /D$cription: /Buyea: /supplier: /

Sa|nple recelved date: Dec.13,2011Tcatlng p€riod: Frcm Dec.13,2011 to Dec.15,2011

T€tino Reau6tedAs specined by client, to delermine the L€ad, Cadmium, Mercrry & Hexavatent Chrcmium content in the submitted sampte inaccordance wilh Direclive 2002/95/EC (RoHS).

Tcstind method:

Testing llem [,leasudng inslrument MQLLead (Pb) EC 62321: 2008, seclion 9 ICP-OES 2mglkg

cadmium (Cd) EC 62321: 2008, section I ICP€ES 2 mg/kgMercury (Hg) EC 62321r 2008, section 7 rcP-oEs 2 mg/kgChrom'um (Cr l'I) EC 62321:2008, Annex I 0.02mg,a(g'

ILS, PLEASE REFER TOTHE FOLLOWING PAGE(S)'**'

lsg-'0.02 mg/kg returs 10 lhe MQLofsample extEction tiquid.

99!s!.c!i9!j-ffien tesied as specifred the submitted sample complied with the requircments of commission Decision of 18 Aug 2005amending Directive 2002l95/EC nolified lnderdocument 2005/618/EC

',:,"il:::i" ryf4lffH*"",",We-i hr n

,3ffi::::1,,44

S}'EI{ZN€N AOV TGSTING T€CHNOlOGY CO.,L'D.KUNSHAN EiANCH Hotllne86-512-5510 8000

6novNO.: 4002E11121307-2R02

TEST REPORT

Add the digestion solution; thevessel is heated Lrntil lhe sampl€ Add HrO, u nlil the sampl€ is clear

F;;1.-F;;,",..;-1.-{Melal subslrat€)

Add lhe digestion solution, clos€

the macrowave vess€|.

Cooling the vessel, fllleri washed and

filled to the mark with distilled water.

The sample is digested in the

micrcwave oven following a specific

decomposilion program.

and l\rercury Content: (Praring)

_____-l coor,ns. nrr", *""n"0 ""0 r"o | ,l o*o -ill_.;*--;-l

I to the mark with Dtwater I I r*r.r*t | | -.- |

STIENZH€N AOV TESIING T€CIII{OLOGY CO.,lIO,KUII9HAN BFANCH

Hdpi/j,w.o{,6n

Hotline86-512"s510 8oO0

Cooling the vessel, filter washed and

filled to the mark with distilled water.

Remove the sample, and coollhe beaker lo rcom tempefalure,and do 1ie color reaction

Heal 50 mL ofDlwaterin lhe

beakerto boiling for 10 min

Test the sample solution and lhe 0.02mg/kg standard solution by UV-VIS.

To Detemine

nov.NO.: 4002E11121 307-2R02

5. To Detemine Hexavalent Chromium- '' ',.'1re$eo ovr I r

s.t sw-resi (M&

TEST REPORTDate: Dec.15, 2011

Contentln colorless and colored ctlromate coaling on

Page 3 ol4

metals: (Plating)

lflhe lest resull is positive,

the sample is considered 1o

have hexavalenl chromium

and the 0.02 mg/kg

Boiling- waieF extractionprocedure shall be used to

lfthe€ isrnterference orI rs hard to decide *terhellhe sample have the hexavalent chrcmium

5 2 Boiling- wEter- en€ction

Take the (5015) cm'z

sample in the beaker.

Srmple d93cription:

SH!NZHEN AOV TESTING TCCTNOIqGY CO.,L}D,KUNSHAN BFANCH nHot l ine86'512^5510 8000

Remove he sample, and cool

lhe beaker 1o room temperature,

and do the color reaction

Heat 50 mlof Olwater in the

beaker lo boiling for 10 min

Test the sample solution and the 0.02

mg/kg standard solution by UV-VIS.

Copper shell subslrateLead wle Platrng 24 Copper shell Plaling

Unil RoHS

Limit 2-3 24"Lead (Pb) mg/Kg 1000 N.D. 2.5 40.0 N.D.Cadmium {Cd) mg/kg 100 N,D. N.D. N.D. N.D.Msrorry (Hs) mg/kg 1000 N.D, N.D, N.D. N.D.Chromium (Crvl) mg/Kg 1000 Negative Negative Negalive Negative

nov.TEST REPORT

NO.r A002E11121307-2R02 Dat€iOec15,2011

-The new RoHS di.ective 2011/65/EU, on Jul 21, 2011 come into force, on Jan. 03, 2013 the fomat imotementation. Dircctive

2002l95/EC shall be reoealed simultaneouslv.

Sp€cim€ns, wnicn requested to determine Lead, Cadmium and l4ercury Conlent, have been dissotved comptetety.-mg/kg=ppm

-N.D.=not detected(

BEIJING HYSTIC NEW MATERIALS CO,, LTD.

5 SHUANGYUAN ROAD, BADACHU HIGH.TECH ZONE,BEIJING,100041, cHtNA

Test Report

l\rodel No. :

Date of Sample Received :Testing Period :Test Requested :

Test Method :

Test Results :

Conclusion i

O\ N6'(

The following sample(s) was^^/ere submitted and identified on behalf of the ctients as : EpOXy ADHESTVE

SGS Job No. : TP12-004950 - TJ

EP6O8

3l Mat 2012

31 Mat 2012 - 09 Apt 2012Selecled test(s) as requested by client.

Please refer to next page(s).

Please refer to next page(s).

Based on the perfomed tesb on submitted samples, the resutts of Lead,Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyts (PBB),Polybrominated diphenyl ethers (PBDE) comply with the limits as set by RoHSDirective 2011/65/EU Annex ll; recasting 2002/95/EC.

Signed for and on behalf ofscs-csTc Ltd.

No. TSNEC1200272601 Date: 09 Apr 2012 Page 1 of I

r 13t2?66233000 I l|t2ri5e95?52 {r*cr !$.ohr 136 266233000 r 136-?a2546?52 e s!.c\ia@6!3@

Aimy WangApproved Signatory

rh!do.!n'lt6!.d5ylh.con!.iy

' id ! ' .drdoi r. i,.; dsr..d 't.,.h r Nift_a'rni ;iir..d h!'F''fl *

I i is do.,m;iclnndis ro'odutad

scsMans'6i.N6.41Th. srf Avenue rloA,Ti.nj n china 3ol4s74 E .*tlisftfi{*€6tt*S4l es6s*l Srl 300457

Memberol rh. SGSGolp{SGS SAI

Te€t Report No. TSNEC1200272601 Date: 09 Apr 20 1 2 Page 2 ol8Test Results :

Test Part Description :

Sp€d.n€n No. SGS Ssmple lD D€6criplion1 TSN12-002726.001 ivory-white paste

Remarks :(1) 1mg/kg= 1 ppm = 0.0001%(2) IIDL = Method Detection Limit(3) ND = Not Deteded ( < MDL )(4) "-' = 1o1 q"nu,","o

RoHS Dirodive 201 t/66/EU

Test Method : With reference to |EC62321:2008(1) Determination ofCadmium by tCP-OES.(2) Determination of Lead by ICP-OES.(3) Detemination of l,rercury by ICP-OES.(4) Determination of Hexavalent Chrcmium by Colo metric Method using UV-Vis(5) Detemination of PBBS / PBDES content by GC-MS.

Test ltem(s)Cadmium (Cd)Lead (Pb)lllercury (Hg)Hexavalent Chromium (Cr(Vl))Sum of PBBSIvlonobromobiphenylDibromobiphenylTribromobiphenylTetrabromobiphenylPentabromobiphenylHexabromobiphenylHeptabromobiphenylOclabromobiphenylNonabromobiphenyl

DecabromobiphenylSum of PBDESMonobromodiphenyl ether

tinit Ud!100 mg/kg1000 mS/kS1000 mS/KS1000 mS/kS1000 mdks

- mg/Kg- mg/Kg- mg/Kg- mg-fts' mgKg- mgKS- ms/Ks- mg/kg- mgKg- m9x9

1000 ms/ksmg/Kg

sG s Madsioi Nc.41 .Tho slh Avenue T EoA,llan in, chiM 1l}a57s F . *lriE*fitrtte8lit641Cscs*l ffll: 300457

MDt 0p12 N O2 N D2 N D2 N D- N D

5 N D5 N D5 N D5 N D5 N D5 N D5 N D5 N D5 N D5 N D

ND5 N D

;trvdGhFo&de,sr,E^rh.;d.i@br.^ {1d".'db.tr' bt6$n;tonl!N{h'i rh rnir t r rd r . 6i1rir h 6 do.vnld d.di'ci't6rr.nE i DaDbh" -d d e

h,q!aoit" rc'rdn dr s.iod.d'

I 136 2aBA80CC | 0G42529s29 f,nqc'i!9s@rI {3f2r66?8806 l1e2?26&12 s sss.f'[email protected]

Membero, rbe SGS Group (SGS SA)

Test Report

Tost ltem(s)Dibromodiphenyl elherTdbromodiphenyl elherTelrab.omodiphenyl etherPentabromodiphenyl elh€rHexabromodiphenyl etherHeptabromodiphenyl etherOctabromodiphenyl etherNonabromodiphenyl etherDecabromodiphenyl elher

Notes :

No. TSNEC1200272601 Date: 09 Apr 2012 Page 3 of 8

trd!

(1) The maximum permissibte limit is quoted from directive 2011/65/EU. Annex lt.

Horebrpmocrrdododecane THBCDD)

Test lvlethod : With reference to IEC 62321:2008, anatysis was p€rfomed by GC-N4S.

udtms/Kgmg/KgmS/kSms/Ksmg/kgmg/Kgm9KSmgKsmgKs

UlitmgKg

MDt555555555

@1N DN DNDNDNDNDNDNDND

pp1N D

T€st ltem(s)Hexabromocyclododecane (HBCDD)

Notes :

Test ltem(s)Dibutyl Phthalate (DBP)B€nzylbutyl Phthalate (BBP)Bis (2-elhylhexyD Phthalale (DEHP)

Notes :

!d! MDt 0p1% (w4,,/) 0.003 ND% (ww) 0.003 ND% (Ww) 0.003 ND

MDI1 0

(1) Reference Information: Diredive 201 1/6S/EU recasting RoHS directive 200?J9S/EC:Hexabromocydododec€ne (HBCDD) is considered as a priority for riskevaluation and substancerestriclion.

Phthalatss

Test l\Iethod: With reference to EN14372:2004, anatysis was performed by co-tvts.

(1) Reference Infomation: Directive 2011/65/EU recasting RoHS directive 200295/EC:Bis (2-ethylhexyl) phthaiate (DEHP), Butyl benzyt phthatate (BBP) and oibutyt phthatate (DBp) areconsidered as a pdority for riskevaluation and subslance restiction.

l 6 y h . c o f r ' m ' s b ] k l ] o t 6 . n ' d

scsMa^tion,No.4l.Tnb 5lh Av€ns€',lEoa,Iaiti.chie 3&457 I i3t,21d5233,t0t r 196-242!2$?52+ B -XirtEi*Si'l&Etni64 r qscs^lt itat:3i1o457 r €t|2r6623!O@ jL3r2:r252!5?c .

Test ReportResult shown is

No. TSNEC1200272601

of the total weight of wet sample

Date: 09 Apr 201 2 Page 4 of I

r i . coh r . i y t ' oh , . . po iN rV r t

y rubt.cr 'o {. o.i.'.r coid [oi. or s.rdrtrr @Mr,idrJ.d 'o rdnt rd

scsMa6roi,No.4l,lh. 5n Ae.n!a1e0A,15njh,ar 6:mr57 r i+P|654806 r 1s-2)25?$2C 'w.i s95 @mFl.lliiE titlalnifr4rqscs*! fit:3s457 r t36-22r6su30m r1s-?aa9r5a52 . !oBdh.6s$m

Menberolrh. SGSGrow ISGSSAl

SGS-

1 )

2)3)

Test ReDort No. TSNEC1200272601 Date: 09 Apr 2012 Page 5 of 8

ATTACHMENTS

cd/Pb/Hg/Cf'lPBB5&PBOES Flow Chart

Name of lhe person who made tesl ing: Aer0n Wang/Jason Li /Angel l Yao

Name ofthe percon in charge oftest ing: Cindy Yin/Rel ZhuThsse samples wsrs dissolved tolal ly by pre-condi l ioning melhod according to

below l low chari . (C16* and PBBS/PBDES test melhod excluded)

ill;l,ffi;i;lii'#:;' i;;;;i'-,iiiliir ii'iiii;'";l;;n *a ro 1t:.,.trere1"l:,11e191191':ll1"l:11*:::::L:11.,1:1:":i:YlTi."ii i i; ;ii; ;'. ti;;:'ii.c"npi'ivt or..p*rurv "tid."di^, ; rn! dod@dca'mri . '#li*lr,:*r";*iitikl.*ri:ni*l:"ll*t:iim::,ttiil:r:r.""i?i"::::'ii,llii:::lligiirliii:?';"'tiiii'i:il*"'

scsManeion.No 41,Ti6 5U Av€rueTEOA.Ianjri ChiM 3COa57

+F.*Ffislit$*x&8tEt! 1qscs*! itia:3m45rI waa'52tflt( I t*r425294244r lst-Pr65a&[0 I]36-24?52S52t e s{sch$@s!s'm

Sample Preparation

Sample lVeasuremenl

Acid digest ion wi lhmicrcwave/ holplale

Sample solvent Adding digest ion reagent

Heating io 9tF95'C forextractionConcentral ion/

Di lut ion ofextract ions0iuIt0n

ResiduBSolution Fi l t ral ion and pHadjustmenl

1) Akali Fusion IDry Ashin g2) Acid todissolve

Adding 1 ,5'diphenylcarbazide fo!

coloi development

Fb/Cd/Hg PEB'PEDE5

Membero , lne SCS Group (SGS SA)

Test Report

ATTACHMENTS

' l ) Name ofthe percon

2) Nams of lhe person

No. TSNEC1200272601 Date: 09 Apr 2012 Page 6 ofB

HECDD Tosting Flow Chaft

who made test ing: Marine Sunin charge oftest ingr Rex Zhu

h'iii d*,n'n.&ij'd b i.rrs

Liliiiiiidin'ii riirul6d t'.ry. tbi"6p.^,! -h..ts*,', t'uf,.dr rh* eon..r ei@' bo 'Jed

scs M.Giai.No 41 ft. &n A64rEDAri.nJh,chi.a 3&457+E *afiE lE*tla lritr! | i scs*l ilfl.3045,

I {36-2tl 65?90{C 1 r&-?4 15295eq2r {62t652&0C0 i 18&24252$?52 e s0scr\N@!os6m

Mebberol rh6 scs Grouo (SGS SAI

Sample cutt ing/preparation

Sample measurement

Solvenl exhaction

ConcBntral iodDilut ion

Test Report

ATTACHMENTS

Phthalde Testng Floli, chaft

1) Nams of lhe pelson who made lest ingi Maina Sun

2) Name ofthe person in charge oftesl ing: Rsx Zhu

i,ffi{{ftf#,fii#jja!:i;'}'.f:rir"" lirid+s6s Ma nsion, No 41 ,Th. 5lh Av.n u. T EDA,llr.jl., ChlM 3Xr457 I l€6 2?)65:4q10 r 1!t2)25295252 slcir93@tr

+F.iitejtfr*teEfEt64lcscs^! tl:300457 lls6'4)652$ffi I [t42529525? t sqsd'ha@'ssom

Mbfrberoilh6 SGs 6roup {SGs 5A)

No. TSNEC1200272601 Date: 09 Apr 2012 Page 7 of I

Solvenl exhacl ion

Conc entralion/Dil ution

Fihralion

Test Report

Sample photo:

TSN12-002726.001

SGS authenticate the photo on original repoionly

'*. End of Report '-

$:l:S,e*',#l+-*I*fiini,iil'*t";l*l'";*i#;fi l#;tr$#,Ii.1i;;iffi ri[l,iL"r't*xf"i,f,itii5rffii:Iitrfl{'iflrif.t*n,lf*jli;i+Ui*l'11;':r"-ff:"{'iili"iir,:,,i1ifi;'ilt-:;;t;;iJ; -;;";,'.; - "- "op-:. 91,.":9:t!"^"

I lt6-z)65l!dn I (S-24 252S5252I ls6-a666d0@ I t*A:s2$?e 6 .Oschiia@E3d

Mehboror $€ scs GbuP (SGS SA)

No. TSNEC1200272601 Date: 09 Apr 20 1 2 Page 8 of 8

scs Malior.No 4l,rno 5h aleFJ. rEDA qan 'n chrB 3m'5'

+!.xt6e;r*iteEtt16llCscs*! {|:30q9l

Test Report

BEIJING HYSTIC NEW

Documents

ICP Test Report Certification Packet/media/electronics_technical/...nov-TEST REPORT NO 4002E11121307.rR02 'The new RoHS directive 201 1/65/EU, on Jul. 21 , 201 1 come into lorce on