June 12, 2012

ICCE-20 July 22-28, 2012 in Beijing, China

PRELIMINARY ACCEPTED PAPER TITLES

There are many papers currently under review and will be upated in web continuously

www.icce-nano.org

We are still accepted NEW paper titles, especially from young lecturers and graduate students who

Needs visibilities

Last Names In ALL CAPITAL Letters denotes PRESENTER

KEYNOTE LECTURES Monday July 23, 2012

Catalyst Nanoparticles Characterization Using Local Adaptive Threshold (LAT) Image Processing

On TEM Micrographs Petra BELE (TU Munich, Germany) 40 min

Metal and Semiconductor Nanoparticles on Graphene: Novel Applications in Energy Conversion and Catalysis Mohamed S El-SHALL (Virginia Commonwealth U., Richmond)

Enhanced Cryogenic Mechanical Properties Of Epoxy Nanocomposites By Nanofillers

Shao-Yun FU (Tech Inst.Phy.Chem., CAS, Beijing, China)

Globalization in Education and Research

Kendall HARRIS (Prairie View A&M U., TX)

Potential use of Smart Technologies for Composites Wind Turbine Development Alan LAU (Hong Kong Poly U.)

Shape Memory Polymer Composites: Active Materials for Shape Changing

Jinsong LENG (Harbin I.T., China)

Nanostructuring Wide Bandgap Semiconductors for High Temperature Thermoelectric Applications Na LU (U. North Carolina Charlotte)

Disorder Engineering: Turning TiO2 Nanoparticles Black

Samuel S. MAO (LBNL, Berkeley, Calif.)

Frontiers of Nanostructured Materials and Nanocomposites Jay NARAYAN (North Carolina St.U., Raleigh)

Quantum-Confined Metal Oxide Hetero-Nanostructures for Clean Energy

Lionel VAYSSIERES (Xian Jiaotong U., China)

Large Band-Gap Smeiconductor Structures such as TiO2 and ZnO Gunnar WESTIN (Uppsala U., Sweden)

Nanofibrous Bio-Composites for Guided Tissue Regeneration

Xiaoping YANG (Beijing U. Chem Tech., China)

Modification of Graphene and its Functional Polymer Nanocomposites

Zhongzhen YU (BUCT, Beijing)

Multifunctional Graphite/Rubber Nanocomposites

L.Q. ZHANG (BUCT, China)

.

BIO COMPOSITES, Natural Materials

Micelles Enhance In Vitro Absorbability Of Flavonols – Kaempferol, Myricetin And Isorhamnetin

P. Sadananda Maiya, D. SURESH (Tumkur U., Karnataka, India)

Evaluation Of Blast Mitigation Strategies For Traumatic Brain Injury

Shailesh GANPULE, Yi Hua, Linxia Gu, Namas Chandra (U. Nebraska-Lincoln)

Soybean Oil Based Bio-Renewable Nanocomposites

Sungho YOON, Chan-Gyu Kim (Kumoh Nat.Inst.Tech., Gumi, S. Korea), Michael R. Kessler (Iowa St.U. Ames)

A Novel Ecological Heat-Insulating Composite Of Steam Exploded Biomass

M. ANDZS (Latvia U. Agriculture, Jelgava), J. Gravitis (Latvian St.Inst Wood Chem.), J. Abolins (U. Latvia)

Evaluation Of Antibacterial Property Induced By TiO2/ZnO Heterojunction Films

Ze Chen, Daian Wei, Guomin Wang, Shanlei Shang, Huijun Zhang (Heilongjiang U.

Harbin, China)

New Generation Of Rare Earth-Doped Quantum Dots As Markers Of Intra-Cellular Absorption And Trafficking Michał M. GODLEWSKI, Mikołaj A. Gralak (Warsaw U. Life Sci, Poland),

Helena Nevalainen (Macquarie U., Sydney, Australia), Romuald Zabielski (Warsaw U Life Sci.),

Marek Godlewski (Warsaw, Poland)

Single-Molecule Protein Detection Using An Aptamer-Integrated Nanopore Sensor

Insoon Kang, Ji Wook Shim, Liqun GU (U. Missouri-Columbia)

Plazma Synthesis Of Low Cytotoxic Magnetic Nanoparticles Encapsulated In Carbon Shells For

Cancer Therapy Liliang CHEN, Emil Omurzak, Tsutomu Mashimo (Kumamoto U., Japan)

The Effects Of Small System On The Type I Antifreeze Protein HPLC-6

Lifen LI (North China Inst. Sci Tech., Beijing, China), Xixia Liang (Inner Mongolia U., Hohhot,

China), Zhuang Yun-fei (North China Inst Sci Tech.)

Fabrication, Characterization and Antibacterial Properties of a Novel Ag/Graphene Composite

Baojiang JIANG, Chungui Tian, Honggang Fu (Heilongjiang U. Harbin, China_

Bio-Functionalized Surfaces For Bio-Fouling And Bacterial Infections Jun F. LIANG, Christian Traba, Jin Woo Park, Henry Du (Stevens I.T., Hoboken, NJ)

Synthesis And Characterization Of Biodegradable Elastomers Through Photo-Crosslinking Star-

Acrylated-Poly(Ε-Caprolactone-Co-Lactide-Co-Glycolide) Gary C.P. TSUI (Hong Kong Poly, China), Z.G. Sun (Hubei U., Wuhan, China), C.Y. Tang

(Hong Kong Poly.U.), Y.K. Yang (Hubei U.), D.Z. Chen (Shenzhen U., China), Harry S.L. Ku

(U. Southern Queensland, Australia) Tuesday

Dental Enamels: the Composite Fivefold Nanostructure and its Quantum Dynamic Properties VanTri NGUYEN (Hanoi U. Sci.Tech., Vietnam)

Fiber Surface Treatment And Its Effect On Strength Of Banana/Epoxy Composites

A.Elayaperumal, N. VENKATESHWARAN, Arun Sundara Nayagam (Anna U., Chennai, India)

Self-Sterilizing Wound Healing Membrane

Sumit LAL, Jyoti Verma, Allan Easteal (U. Auckland, New Zealand)

Injection Moulding Of Cocrmo Alloy Powder For Potential Orthopedic Applications Mohd A.OMAR, N.Abdullah, N.Roslani, N. Zainon (AMREC, Sirim Berhad,

Malaysia), A.H.Zulkifly (IIUM, Kuantan, Malaysia)

CHEMISTRY of COMPOSITES

Soluble Dendrimer Functionalized Carbon Nanotubes And Its Dispersion In Silica Matrix Milton Jackson, Leah Mitchel, and Aderemi OKI (Prairie View A&M U., TX)

Testing The Universality Aspects Of Charge Transport Across Disordered Oxide Layers

Mikhail BELOGOLOVSKII (Donetsk Inst.Phy, Ukraine), Vincenzo Lacquaniti (Turin, Italy),

Tamio Endo (Mie U., Japan)

Phage-Templated Materials: Sensing, Imaging And Beyond

Liaohai CHEN (Utah St.U., Logan)

Examination Of The Loss Of Mechanical Properties Due To Biodegradation Effects Of Polyvinyl Alchol-Starch Blends Chong-Yu LOW, Seng-Xin Goh, Lee Tin-Sin, Tiam-Ting Tee,

Soo-Tueen Bee (UTAR, Kuala Lumpur, Malaysia), David Hui (U. New Orleans),

Qinghong Fang (Shenyang U.Chem.Tech., China), Ing Kong (UKM, Malaysia

Rates Of Degradation For Polylactic Acid/Starch Blends With And Without Addition Of Microbes

Tiam-Ting Tee, Tin-Sin Lee, Soo-Tueen Bee, Chong-Yu Low, Alvin Wan Siang Lee

(UTAR, Kuala Lumpur, Malaysia), David Hui (U. New Orleans), Qinghong Fang

(Shenyang U. Chem Tech., China), Ing Kong (UKM, Malaysia)

Multiscale Molecular Modeling And Experimental Investigation Of Polypyrrole-Carbon Nanotubes

Composite Materials Luisa Pilan, Matei Raicopol, Andreea Madalina Pandele,

Mariana IONITA (U. Politech Bucharest, Romania)

The Effect Of Coupling Agents On The Mechanical Properties Of The Carbon Fiber Reinforced

Polypropylene Composites SongHee HAN, Hyun Ju Oh, Hyun Chul Lee, Seong Su Kim

(Chonbuk Nat. U., Jeonju, S. Korea) Tues Wed

The Synthesis of Cu(CuO)/Single Walled Carbon Nanotubes Composite By Electro-Deposition And The Study On Its Sensitive Gas Discrimination to NO Hongmei BI, Ying Liang

(Heilongjiang Bayi Agricul.U., Daqing, China), Keying Shi (Heilongjiang U., Harbin, China)

Morphology and Microstructrure of Aggregates and Gelation Behavior of P3HT/PCBM

Composites in Xylene Solutions Chien-Yi LEE, Ching-Iuan Su (Nat Taiwan U. Sci Tech, Tapei), Lung-Chuan Chen, Jean-Hong Chen (Kun Shan U., Tainan

Niobium Surface Studies after HF-free Electrochemical Treatment

Tadeusz Hryniewicz, Krzysztof Rokosz (Polit Koszalin, Poland), Jan Valicek (TU Ostrava,

Czech Rep.), H.R. Zschommler Sandim (U. Sao Paulo, Brazil), Steinar Raaen (NTNU Trondheim, Norway)

Hardness And Nanohardness Measurements Of Titanium Biomaterial After

Magnetoelectropolishing Tadeusz HRYNIEWICZ (Polit Koszalin, Poland), J. Valicek (TU Ostrave, Czech Re.), R. Rokicki (Electrobright, Macungie, PA), K. Rokosz (Polit Koszalin)

Effect Of Impact Modifier On The Mechanical Properties Of Polytrimethylene

Terephthalate (PTT) Pravin R. GAIKWAD, P.A.Mahanwar, A.C. Rao (Deemed U., Mumbai, India)

Preparation Of Water Dispersible Graphene By Covalent Functionalization Of Graphene

Oxide Using Polyethyleneimine Hongyu LIU (Chonbuk N.U., S. Korea and Henan U. Sci Tech., China), R. Rajasekar, Tapas Kuila (Chonbuk N.U.),

Yu Qing Zhang (Henan U.S.T.), JoongHee Lee (Chonbuk N.U., S. Korea)

Preparation Of Water Dispersible Functionalized Graphene Using A Novel Aryl Diazonum Salt

Dong Sheng YU (Chonbuk N.U., and Luoyang Inst Sci Tech, China), Tapas Kuila, Nam Hoon Kim, Joong Hee Lee (Chonbuk N.U., Jeonbuk, S. Korea)

Effect Of The Processing Of Injection Molded Stainless Steel Fiber Filled-Polymer Composite On Microstructure And Resistivity Jianxiu Liu, Aiyun JIANG, Jingchao Zou, Baofeng Zhang,

Haihong Wu (Huanghe Sci Tech. Coll., Zhengzhou, China)

Mechanics Properties of SiC Whisker Reinforced Magnesium Matrix Composites by Powder

Metallurgy Yajun Zhou, Jianxiu Liu (Zhengzhou Inst Light Ind, China)

Research Progress of PcBN Materials And Cutting Tools

Xinxing Ban, Lianqing Ji (Zhengzhou U. Light Ind., China), Shufeng Liu (Zhengzhou, China)

Preparation Of The Acrylic Acid-Modified Carbon Nanotubes

Xun Cao, Jiayou Tang, Lijun Gao, Liming Zhou, Shaoming Fang

(Zhenzhou Inst. Light Ind., China)

Rare earth Terbium (Tb) Functional Multi-Walled Carbon Nanotubes Nanocomposite: Synthesis,

Characterization And Photoluminescent Properties Liming Zhou, Rui Wang, Lijun Gao,

Xun Cao, Shaoming Fang (Zhengzhou Inst Light Ind, China)

Directional Solidification And Vacuum Melting Purified Solar Grade Polysilicon

Qiu Hui, Jian-Xiu Liu (Zhenzhou Inst. Light Ind., China)

Wind Power Brake Pads, The Copper-Based Friction Pad Burn In The Cast Steel Board,

Jianxiu Liu, Yajun Zhou (Zhenzhou Inst. Light Ind., China)

Visualization Of The Mechanical Application Of Case Teaching

Xiaohong Liu, Jianxiu Liu (Zhengzhou Inst Light Ind, China)

ENERGY MATERIALS

Enhanced Light Harvesting in Dye-Sensitized Solar Cells by Coupling to a Titania Nanotube Based

Photonic Crystal Haitao HUANG, Min Guo, Zhehui Yong, Jia Lin, Keyu Xie, Yu Wang,

Limin Zhou (Hong Kong Poly U., China)

Synthesis of ATT/TiO2/PANI Nano-Composites Doped With Sulfosalicylic Acid And Its

Thermoelectric Properties Guanghong Zhou, Xuan Pan, Hongyan DING

(Huaiyin I.t., Jiangsu, China)

The Outcome Of The Isos-3 Inter-Laboratory Collaboration – Characterization Of Degradation

Pathways Occurring In A Variety Of Organic Photovoltaic Devices

Birgitta ANDREASEN, David M. Tanenbaum (TU Denmark, Roskilde), Martin Hermenau

(TU Dresden, Germany), Eszter Voroshazi (U. Leuven, Belgium), Matthew T. Loyd (Golden,

Colorado), Yulia Galagan, Birger Zimmernann, Suleyman Kudret, Wouter Maes, Laurence Lutsen, Dirk Vanderzande, Uli Wuerfel, Ronn Andriessen, Roland Rösch, Harald Hoppe,

Gerardo Teran-Escobar, Monica Lira-Cantu, Agnès Rivaton, Gulsah Y. Uzunoglu,

David Germack, Markus Hösel, Henrik F. Dam, Mikkel Jorgensen, Suren A. Gevorgyan, Morten V. Madsen, Eva Bundgaard, Frederik C. Krebsa, Kion Norrmana

Organic and Inorganic Hybrid For Solar Application

Jr-Hau HE (Nat. Taiwan U., Taipei)

Investigation Of The Effect Of Wind Strike On Wind Turbine Blade Of Composite Material S.K. AGRAWAL, Er. Mihir Kumar Pandey, Dr.K.M.Gupta (Allahabad, India)

Preparation and Characterization of Ionic Liquid/ POSS/ ABPBI Nanocomposite Fuel Cell

Membranes Fan ZHANG, Xujin Bao, Mengyao Huang, Mathew Wheeldon (Loughborough U., UK)

The Preparation Of Graphene Film By Electroplating And Its Application As Anode In Organic

Solar Cells Huafeng Sun (Beijing Jiaotong U.,China), Peng Liu (Beijing Inst Tech., China), Linzhuo Wang, Shengjie Yang (Beijing Jiaotong U.), Shengyi YANG (Beijing Inst Tech.)

Self-Assembly Functional Materials For Electronics And Energy Applications

Ye Zhou, Su-Ting Han, Zong-Xiang Xu, Vellaisamy A.L. ROY (City U., Hong Kong, SAR)

Tues-Wed

Design And Experimental Study Of The Vanadium Redox Flow Battery Cathode Electrolyte

Additives Chun YANG, Shubo Wang, Xiaofeng Xie, Jinhai Wang, Zongqiang Mao

(Tsinghua U., Beijing, China)

Carbon Fiber Supported - Silicon Nanowires as the Anode in Li-ion Batteries

Z. Yao, H. HUANG (Wright St.U., Dayton, OH)

Optoelectric Characterization Of Defects In Solar Cells Pavel Skarvada, Dinara S. Dallaeva, Robert Macků, Lubomír Grmela, Pavel TOMÁNEK

(Brno U.T. Czech Rep.)

Development of Zn0.9Al0.02O/CA3Co4O9 Module for Thermoelectric Power Generation

Paolo MELE (Hiroshima U., Japan), H. Yasumune, H. Kamei, M. Uemitsu, K. Matsumoto,

K. Miyazaki (Kyushu I.T., Japan) INVITED 23 min

Tailoring Titania Nanostructures for Solar Cell Applications

Peter MUELLER-Buschbaum, Monika Rawolle, Martin A. Niedermeier, Kuhu Sarkar,

Jan Perlich (Hamburg, Germany), Philipp Lellig (Max Planck Mainz), Jochen S. Gutmann (U. Duisburg-Essen)

Experimental Results Of An Asynchronous Machine With Thermoelectric Cooling

Modules Rupert GOUWS, Heino VanJaarsveldt (North-West U., South Africa)

Carbon Composite Electrodes For Energy Storage Devices And Fuel Cells Jim P. ZHENG, Mei Zhang, Wanjun Cao, Wei Zhu, Richard Liang, Guoqing Zhang

(Florida A&M U., Florida St.U., Tallahassee)

GENERAL APPLICATIONS or PROCESSING

Effect of Ti on The Pyrolysis Process Of Silicon Oxycarbide Materials

J.L. OTEO, A. Tamayo, R. Rubio, J. Rubio (Inst Ceramica Vidrio, Madrid, Spain)

High-Speed Superplastic Flow At Low Temperatures In Amorphous And Nanocrystalline

Ceramics Hiroshi KIMURA (Nat. Def Acad, Yokosuka)

Cyclic Oxidation of TiCrN Coatings Yeon-Sang HWANG, Min-Jung Kim, Sung-Jun Bong, Dong-Bok Lee

(Sungkyunkwan U., Suwon, S. Korea)

Effect of Polycarbonate (PC) and Plasticizer on the Performance Characteristics of Mixed Plastics

Obtained from Waste Electrical and Electronic Equipment (Weee). Sauravendra KS Tomar, Manoranjan Biswal, Smita Mohanty, S. K. Nayak

(CIPET, Bhubaneswar, India)

Evaluation of Viability of Sulfonated Polyetheretherketone Membranes for Fuel Cell Application Arvind Gupta, Lakshmi Unnikrishnan, Smita Mohanty, S K Nayak

(CIPET, Bhubaneswar, India)

PLA/PGA Scaffolds Prepared by Solvent Casting/Particulate Leaching (SCPL) to Improve Pore

Interconnectivity within Tissue Engineering Scaffolds

Sudheer Kumar, Mousam Choudhury, Smita Mohanty, Sanjay K Nayak

(CIPET, Bhubaneswar, India)

Design, Preparation And Application Of Attapulgite Protective Coating In Spring Steel At Elevate Temperature Xuan Pan, Na Zhang, Yuebin Lin, Mujian Xia (Huaiyin I.t., Jiangsu, China)

Analysis On Dynamic Failure Behaviors Of Steel Double-Layer Grids Supported By Steel Columns

Used In A Gymnasium With The Function Of Earthquake Victims Shelter Under Disaster Earthquake Zhao Xi, Hai-Wang LI, Jing Liu (Taiyuan U.T., China)

Tool Wear During Milling Laminated Carbon Fibre Reinforced Plastic

M.K. Nor KHAIRUSSHIMA, C.H. Che Hassan, A.G. Jaharah (Nat. U. Malaysia), A.K.M Amin (Int. Islam. U. Malaysia, Kuala Lumpur)

Synergistic Effect of MCM-41 Nano-Filler On Intumescent Flame Retardant of NR Composites

Na WANG, Jing Zhang, Qinghong Fang (Shenyang U.Chem.Tech.), David Hui

(U. New Orleans)

Mathematical Modeling Of The Process-Induced Deformation Considering Compaction Effect

Tae-Hoon SONG, Chun-Gon Kim, Hong-Kyu Jang, Won-Ho Choi, Jae-Hwan Shin, Jin-Kyu Kim

(KAIST, Daejeon, S. Korea), Kyung-Jin Jung (Daejeon, S. Korea)

Surface Deposition And Characterization Of A 3-D Photoanode For DSSC Applications

Fareed DAWAN, Yoonyoung Jin (Louisiana St.U.), Eyassu Woldesenbet

(Southern U., Baton Rouge)

Poling Effects On The Piezoelectric Properties Of Glass Fiber Reinforced Polymer Composites Hui-Yun HWANG (Andong Nat.U., S.Korea) Tues-Wed

Synthesis and Characterization of PANDB/χ-Al2O3 Conductive Core-Shell Composites

Cheng-Ho CHEN, Yi-Ting Kan, Ching-Feng Mao, Ching-Dong Hsieh, Wei-Tung Liao

(Southern Taiwan U., Tainan)

MgB2 Composites Obtained by Spark Plasma Sintering

P. BADICA, G. Aldica, D. Batalu (Nat.Inst.Mat Phys, Magurele,Romania)

Investigation On The Mechanical Properties Of Clay/Epoxy Nanocomposite Using Nanoindentation

Sungrok HA, KyongYop Rhee (Kyung Hee U., Yongin, S. Korea)

Flexural Properties Of Moisture-Absorbed Basalt/CNT/Epoxy Composites Man Tae KIM (Gumi Electronics, S. Korea), Kyong Yop Rhee (Kyung Hee U.,

Yongin, S. Korea)

Plasma Treatment of PP to Improve The Bonding Strength of PP/Aluminum Composites Ja Ho KU, Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea)

Preparation And Characterization Of Ppy/ Thermal Exfoliated Graphene Composites By Emulsion

Polymerization Yinan YAN, Tapas Kuila, Nam Hoon Kim, Joong Hee Lee (Chonbuk N.U.,

Jeonju, S. Korea)

Directional Solidification And Vacuum Melting Purified Solar Grade Polysilicon

Hui QIU, Jian-Xiu LIU, Xin-xing Ban (Zhengzhou U. Light Ind., China)

The Mechanical And Wear Properties Of Ti50Cu28Ni15Sn7 Bulk Metallic Glass Composites

Containing Carbon Particles Pee-Yew LEE (Nat. Taiwan Ocan U., Keelung)

Monolith Silica Membrane For Hydrogen Separation

Yunfeng Gu, Joel Clinton, Curtis Fekety, Zhen Song (Corning Inc. Corning, NY)

Triple-Layer Structure Synthesis of ZnS/ZnS:Mn/SiO2 for Improved Phosphor

Wentao Zhang, Hong-Ro LEE (Chungnam Nat. U., Daejeon, S. Korea)

The Influence Of Low Pressure Injection Molding Process Parameters On Ceramics Disks Geometry Carlos A. COSTA, Angelo P. Titton, Felipe M. Pasquali, Robinson C. D. Cruz

(U. Caxias do Sul, Brazil)

Modal Analysis of Passenger Car S.M. Darwish, Ahmad G. Bahgat King Saud U., S. Arabia)

Research Progress Of PCBN Material:A Review

Xin-xing Ban, Lian-qing Ji, Hui QIU (Zhengzhou U. Light Ind., China)

Conjugation of a 19

F Imaging Tracer to Serum Albumin: Synthesis and 19

F NMR Evaluation Xuyi Yue, Y. Bruce YU (U. Maryland)

Modal Analysis of Passenger Car

S.M. Darwish, Ahmad M.B. GEMEAL (King Saud U., S.Arabia)

Theoretical And Numerical Solutions Of Maglev Train Induced Vibration

Shen-Haw JU, C.C. Leong, Y.S. Ho (Nat. Cheng Kung U., Tainan)

Characterization Of Oxide Scales Fored On HVOF-Sprayed Nicocralyreta Coatings

Min Jung KIM, Sung Bin Won, Yeon Sang Hwang, Dong Bok Lee (Sunkyunkwan U., S.Korea)

Influence of Wet Spinning Parameter And Post Heat Treatment on Crystalline Structure of

Poly(vinylidene Fluoride) Seung Mi YU, Hyun Ju Oh, Seung Ah Song, Yong Sik Chung,

Seong Su Kim (Chonbuk Nat. U., Jeonju, S. Korea) Tues-Wed

The Effect Of Graphene Oxide On The Thermal And Mechanical Properties Of The Liquid

Epoxidized Natural Rubber Toughened Epoxy Composite

Chin Hua CHIA, Noorhafanita Norhakim, Sahrim Hj Ahmad (UKM, Kuala Lumpur, Malaysia), Nay Ming Huang (U. Malaya), Hong Ngee Lim (U. Putra Malaysia, Selangor)

Silver Nanoparticles Enhanced Surface Plasmon Resonance Phase-Interrogation Biosensor

Tzu-Cheih Peng, Chih-Wei Chen, Wen-Chi Lin (Nat. Taiwan Ocean U., Keelung),

Din Ping Tsai, Hai-Pang CHIANG (Nat App Res Lab, Hsinchu)

Microwave Properties Of Carbon Nanotube/Microwire Multiscale Hybrid Composites

Faxiang QIN, H.X. Peng (U. Bristol, UK), C. Brosseau (U. Brest, France), H. Wang,

J.F. Sun (Harbin I.T., China)

Review Of SMA Smart Composite Structure

L. XU, Guoqing Yuan (Tongji U., Shanghai, China), David Hui (U. New Orleans)

SLS 3d Impression Using Polymer/Ceramic Mixture To Produce Material Pososity Robinson C. D. CRUZ, Angelo P. Titton (U. Caxias Sul, Brazil), Marcelo F Oliveira,

Jorge V.L. Silva, Izaque A. Maia (Renato Archer Campus, Brazil), Carlos A. Costa

(U. Caxias Sul)

A New Process To Manufacture Cross-Linked Gelatin Microfibers Jyoti Verma, Sumit Lal, Allan Easteal (U. Auckland, New Zealand)

Design And Fabrication Of Battery-Free Wireless Gas Sensor Arrays Based On 3D Composite

Oxide Semiconductor Nanowire Materials Chu JIN, Xaioyan Peng, David. Wang, Peter X. Feng (U. Puerto Rico, PR)

Carbon Nanotube Field Effect Transistors Development and Perspectives

Arezki BENFDILA, M. Berd, A. Lakhlef (U. M. Mammeri, Algeria)

Raman Signal Enhancement Of Single Layer Graphene Sandwiched With Gold Nanoparticle

Array System Potential For Biochemical Sensing Application

Judy M. OBLIOSCA (Nat. Tsinghua U., Hsinchu), Teddy Tite, Lain-Jong Li (Acad Sinica,

Taipei), Hung-Yao Chu, Pen-Cheng Wang, Fan-Gang Tseng (Nat. Tsinhua U., Hsinchu)

Hybrid Nanomaterial Gas Sensors

Junhong CHEN, Ganhua Lu (U. Wisconsin-Milwaukee) Invited 23 min

Fabrication Porous Si3N4 Ceramics Via Camphene-Based Freeze-Casting Process

Zhaoping HOU, Feng Ye, Limeng Liu, Qiang Liu (Harbin I.T., China)

Hybrid Programming Of SMP Based Syntactic Foam Samuel I. IBEKWE (Southern U., Baton Rouge), Abe King (Louisiana St.U.), Guoqiang Li

(SUBR, LSU)

Reducing Potential Nanotoxicity Of Orthopaedic Implantable Devices Kris Chettiar, Mateen Arestu, Peter Smitham, Simon GRANGE (Alberta Bone and Joint

Health Inst., Canada)

Self-Healing Of Epoxy With Microcapsules Of Curing Agent

Qi LI, Ananta Kumar Mishra, Nam Hoon Kim, Joong Hee Lee (Chonbuk Nat U., S. Korea)

Reinforcement Materials for Extreme Large Wind Turbine Rotor Blades

Georg ADOLPHS (Owens Corning Engineered Solutions, Brussels, Belgium)

The Crystallization And Luminescence Of Sm2+

-Doped SrO-Bi2O3–K2O–B2O3 Glass Ceramics

Taiju TSUBOI (Kyoto Sangyo U., Japan), Zhihao Wei, Xigang Wang, Yanlin Huang (Soochow U., Suzhou, China),

Manufacture of Environmental-friendly Plywood Bonded with HDPE

Lu FANG, Liang Chang, Wen-jing Guo, Yong-ping Chen, Zheng Wang

(Chinese Acad Forestry Beijing, China)

Investigation of the Thermal Contact Resistance in Thermosetting Pultrution Process

Ismet BARAN, Cem C. Tutum, Jesper H. Hattel (TU Denmark, Lyngby)

Photocatalytic Degradation Of NOx Using Al2O3/TiO2/Ha Nanostructure Composite Filters Mojtaba NASR-Esfahani, Sahar Fekri (Islamic Azad U., Irana) chair

Nanostructured Cu/V Nanolayers With Enhanced Radiation Tolerance

Xinghang ZHANG (Texas A&M U., Coll Stn), E.G. Fu, Nan Li, A. Misra, Y-Q. Wang (Los Alamos Nat Lab., NM), L. Shao, H. Wang (Texas A&M U.)

Multiplexed Reconfigurable Biomarker Detection Using Solid-Liquid Phase Change

Nanoparticles Chaoming WANG, Liyuan Ma, Ming Su (U. Cen Florida, Orlando)

Compositional Dependence of Microstructure in Alkali Niobate Lead-Free Ceramics Prepared by Conventional Mixed Oxide Method M.R. SAERI (Shahrekord U., Iran),

A. Barzegar (Shiraz U.), H. Ahmadi Moghadam (Shahrekord U.)

Mechanical And Dynamic-Mechanical Properties Of PHBV Based Blown Films Containing Halloysites Pietro Russo (Nat Council Res., Naples, Italy), Barbara Vetrano,

Domenico ACIERNO (U. Naples, Italy)

The Studying Of Catalyst Nature Influence On The Nanocarbon Structure Produced By Carbon Monoxide Disproportionation Irina KULISH, Nikolay Kolesnik

(Zaporozhye St. Engrg., Ukraine), Oleg Prilutsky (Ofakim, Israel)

Mechanochemical Route Of Perovskite-Like Composite Materials Preparation Lyubov ISUPOVA, Larisa Pinaeva, Dmitrii Ivanov, Irina Yakovleva (Boreskov Inst, Novosibirsk, Russia)

Catalyst Nanoparticles Characterization Using Local Adaptive Threshold (LAT) Image

Processing On TEM Micrographs Petra BELE (T.U. Munich, Germany)

Flexible Gas Sensor Array with an Embedded Heater Based in Metal Decorated Carbon

Nanofibres S. CLARAMUNT, O. Monereo, M. Boix, R. Leghrib, J. Daniel Prades,

A.Cornet (U. Barcelona, Spain), P. Merino, C. Merino (Burgos, Spain), A. Cirera

(U. Barcelona)

Influence Of Both Cooling Rate And TeO2 Addition On The Properties Of YBCO

Superconductor Y.M.Z. AHMED, M.S. Hassan (CMRDI, Cairo, Egypt),

H. Abd-Elatif (Cairo, Egypt)

Future Design Of Composite Launcher Structures

Richard DEGENHARDT (DLR, Braunschweig, Germany)

Dynamic Analysis Of Modified Composite Helicopter Blade

Bosko RASUO, Mirko Dinulovic (U. Belgrade, Serbia)

Multidisciplinary Design Optimization Of A Large Scale Hybrid Composite Wind Turbine

Blade Structure Madhu N. NADIG, Sathya N. Gangadharan (Embry-Riddle Aero U.,

Daytona Beach, FL)

Corrosion Behaviour Of Different Low Carbon Steel Pipelines For Natural Gas

Installations (A Comparative Study) W.A. Gowayed (Mansoura U., Egypt),

S.M. Abdou (Port Said U., Egypt), S. ABDEL RASSOL, A. Fouda (Mansoura U.), S.M. Samy (Port Said U.)

Impact Energy of Aluminum Weldments Using Double Shoulder Friction Stir Welding

M.A. Shahenda, Ebtisam F. Abdel-GWAD, Soher Samy (Port-Said U., Egypt)

Preparation and Antibacterial Activity Of Polypropylene composite with n-Ag/ZnO Xiaolin XU (Southwest Jiaotong U., Chengdu,China)

Paramagnetic Response of Helical Structure

Juntin ZHU (Southwest Jiaotong U., Chengdu,China)

Sythesis Of Carbon Microcoil Using Ni Nanoparticles And The Growth Mechanism Study

Xian JIAN (Southwest Jiaotong U., Chengdu,China)

Synthesis of ZnO Hollow Sphere Via Trisodium Citrate Assisted Hydrothermal Method And Its Application As A Humidity Sensors Shibu ZHU (Southwest Jiaotong U., Chengdu,China)

Preparation and Electromagnetic properties of the Polyaniline/Graphite Composites

Xiangnan CHEN (Southwest Jiaotong U., Chengdu,China)

Growth Of Copper Nanoparticles On Multi-Walled Carbon Nanotubes Dan CHEN (Southwest Jiaotong U., Chengdu,China)

Preparation Of Nanozirconia Ceramics By Gelcasting Chen Liu, Xinghong Zhang, Ping Hu, Changqing Hong, Dajun Song (Harbin I.T., China)

Performance Prediction For Mesh Reinforced Membrane

Changguo Wang, Lei Zhang, Zhenyong Du, Huifeng Tan (Harbin I.T., China)

Fabrication Porous Si3N4 Ceramics Via Camphene-Based Freeze-Casting Process Zhaoping Hou, Feng Ye, Limeng Liu, Qiang Liu (Harbin I.T., China)

Preparation of Continuous Si3N4 Reinforced 2024 Aluminum Alloys Composites By Pressure

Infiltration Method Qiang Liu, Feng Ye, Shichao Liu, Zhaoping Hou, Biao Zhang

(Harbin I.T., China)

Effect Of Temperatures On The Microstructures And The Insulation Properties Of The Carbon

Aerogels Haixia Yang, Feng Ye, Haijiao Zhang (Harbin I.T., China)

INFRASTRUCTURE COMPOSITES or WOOD

An Improved Multi-Objective Model For Combined Location-Routing Problem In Hazardous

Waste Recycling Logistics Jiahong ZHAO (Southwest Jiaotong U., Chengdu, China)

Experimental Strengthening of Reinforced Concrete short Corbels by gluing Carbon Fibre

Composite (CFC) Sheet Ivelina Ivanova, Jules ASSIH, Alex Li (U. Reims Champagne

Ardenne, France), Dimitar Dontchev (U. Sofia, Bulgaria), Yves Delmas (Reims, France)

Flexural Test and Analysis of SHCC and RC Composite Slabs

Chang-Geun CHO (Chosun U., Gwangju, S. Lorea), Luciano Feo (U. Salerno, Italy), D. Hui

(U. New Orleans)

Cement-Bonded Cellulose Fiber Composites By Carbonation Yixin SHAO, Sam Wang (McGill U., Canada), Zhen He (Wuhan U., Canada)

Geometric Effects To The Electrical Properties Of Cement Mortars

Tsung-Chin HOU, Kow-Wei Wu (Nat. Cheng Kung U., Tainan)

Finite Element Modeling Of Insulated Precast Concrete Sandwich Wall Panels Reinforced With

GFRP Shear Grids Ho-Ryong KIM, JunHee Kim, Young-Chan You, Ki-Sun Choi

(Korea Inst. Const. Tech., Gyeonggi), Young-il Seo (Midasit, Gyeonggi, S. Korea)

Extruded Wood Plastic Composites With Pressure-Treated Wood Fibers

Guangping Han, Yao Fei (Northeast Forestry U., Harbin), Qinglin Wu (Louisiana St.U.)

Effects Of Environmental Temperature On The Mechanical Properties Of Wood/Maleic-

Anhydride Grafted PP/Hdpe Blend Composites Weijun YANG, Yanjun Xie, Yan Cao, Haigang Wang, Qingwen Wang (Northeast Forestry U.,

Harbin, China)

Experimental Testing Of Stirrup Effects On Compressive Strength Of Concrete Columns Jure Radnic, Radoslav Markic, Alen Harapin, Domagoj MATESAN (U. Split, Croatia)

Behavior and Modeling of Concrete Cylinders in Axial Compression Confined Using FRP Rings

Eunsoo CHOI, Sunhee Park, Jinho Kim, Jaewon Lee (Hongik U., S. Korea)

Polymer Concretes: A Description And Methods For Modification And Improvement

Gonzalo MARTÍNEZ-Barrera (Auto U. St. Mexico, San Cayetano)

Resonant Ultrasound Studies Of Steel-Polymer Composites

Yun-Che WANG, Chun-Yi Wu, Chih-Chieh Lu (Nat. Cheng Kung U., Tainan), Chia-Min Wei, Cheng-Yen Wu (Kaohsiung)

Cohesive Zone Modeling Approaches for Predicting Debonding Behaviors of FRPs used to

Strengthen Reinforced Concrete Beams Hee Sun KIM, Young Hee Kim, Dori Kim, Nadia Utui (Ewha Woman’s U., Seoul, S. Korea), Eunsoo Choi (Hongik U., Seoul, S. Korea)

Maturing Of Polymer Concrete Composites

Igor SBARSKI, H. Haddad, A. Arora (Swinburne U.T., Victoria, Australia)

Effects Of Fiber Size On The Creep Of Wood Fiber Plastic Composite

Haibing Huang, Huhu Du，Xiaohui Yang, Weihong WANG (Northeast Forestry U. Harbin,

China)

Compression Behavior On Steel-Rock Composite Yunliang TAN, Lu Chen (Shandong U.Sci.Tech., Qingdao, China), D. Hui (U. New Orleans),

Fenghai Yu (Shangdon U.Sci.Tech.)

Nonlinear Finite Element Analysis Of Square Reinforced Concrete Plates Strengthened By Fiber Reinforced Plastics Cindrawaty LESMANA, Hsuan-Teh Hu, Fu-Ming Lin, Nan-Ming Huang

(Nat. Cheng Kung U., Tainan)

Design of Timber Glulam and LGL Beams with Perforations C Y ADAM, H.R. Milner (Monash U., Melbourne, Australia), Berhan M. Ahmed (U. Melbourne,

Australia)

Transport Properties Of Cement Mortar With Graphite Nanoplatelet

Hongjian DU, Sze Dai Pang, Ser Tong Quek (Nat.U. Singapore)

Extruded Wood Plastic Composites With Pressure-Treated Wood Fibers

Guangping HAN (Northeast Forestry U. Harbin, China), Yao Fei, Qinglin Wu (Louisiana St.U.)

Effect of Silane Structures on the Mechanical Properties of Wood/High Density Polyethylene Composites Yanjun XIE, Qingwen Wang, Chuntao Li (Northeast Forestry U., Harbin China)

Flexural Strength Of Insulated Precast Concrete Wall Panels With Gfrp Grids

JunHee KIM, Young-Chan You, Ki-Sun Choi, Ho-Ryong Kim (Korea Inst Const.Tech.,

Gyeonggi, S. Korea)

Dimensional Accuracy Of Flange Width Of Flexible Channel Section-On Development Of Flexible

Cold Roll Forming Machine Ihou Shou, Hiroshi ONA (Takushoku U., Tokyo, Japan)

Integrity Assessment Of Thick Concrete Plates

N. Dawood, H. MARZOUK (Ryerson U., Toronto, Canada)

A Study On Block Shear Strength Of Austenitic Stainless Steel Channel Bolted Connections With

Four Bolts TaeSoo KIM, MinSeong Kim (Hanbat Nat U., S. Korea), SungWoo Shin

(Hanyang U., Ansan,S. Korea), TaeJun Cho (Daejin U., Gyeunggi, S.Korea)

An Experimental Study On The Characteristics Of Cement Material Using Nano-Binder

Jeong-Bae LEE, Seong-Soo Kim, Taejun Cho (Daejin U., Pocheon, S. Koresa),

David Hui (U. New Orleans)

Research on Nonlinear Analysis of Squat and Slender RC Wall Using Different Macroscopic

Models Jiuk SHIN, JunHee Kim, Young-Chan You, Ki-Sun Choi, Ho-Ryong Kim

(Korea Inst. Construc. Tech.,KICT, Gyeonggi)

A Composite Pavement Material with High Mechanical and Durability Properties for Roads and Airport Pavement Constructions Hassan Al NAGEIM,

Shakir Al-Busaltan, William Atherton, George sharpls (Liverpool John Moores U., UK)

Analytical Estimation and Modeling of CFRP-Strengthed RC Beam-Column Joints Kien LE-TRUNG, Khoa Nguyen-Dang, Kihak Lee (Sejong U., Seoul, S. Korea)

Waste Foundry Sand Reused As Clay Replacement For Tile Manufacture

Deng-Fong Lin, Mei-Ling Chung, Huan-Lin LUO (I-Shou U., Kaohsiung), Mei-Yun Wang (Kaohsiung)

Effect Of Oil Contaminated Clay On The Manufacture Of Geopolymer Materials

Huan-Lin Luo, Yang-Sian Chen (I-Shou U., Kaohsiung), Show-Ing Shieh (She-Te U.,

Kaohsiung), Deng-Fong LIN (I-Shou U.)

MAGNETIC COMPOSITES or PHYSICS or THIN FILMS

3D Nano-Seeding Self-Assembly of Ferromagnetic Fe Dot Array-LaSrFeO4 Nano-Heterostructure,

Koichi OKADA, Takuya Sakamoto, Kohei Fujiwara, Azusa N. Hattori, Teruo Kanki, Hidekazu Tanaka (Osaka U., Japan) invited

Production Of Porous Gold Nanofilms, Nanobelts And Their Applications

Renyun ZHANG, Magnus Hummelgård, Håkan Olin (mid Sweden U., Sundsvall)

Quantum Dots-Based Solar Cells

Liqiang Ren, Jingling Qiu, Shiren Wang (Texas Tech U., Lubbock)

Conducting Material Structures with PMMA Polymer Optical Multifunctional Nano-Engineering

Complexes K.K. Kamani, B.J Madu, R.K Rangaswami (PGC, Chitradurga, India)

Effect Of Carbon Nanotubes-Magnetite Content On Mechanical And Magnetic Properties Of

Thermoplastic Natural Rubber Ing KONG (UKM, Selangor, Malaysia), Robert Shanks

(RMIT U., Australia), Sahrim Ahmad, Lih-Jiun Yu (UKM)

Graphene in Poly(styrene-b-butadiene-b-styrene) Composites

Michael CZAJKA, Ing Kong, Robert A. Shanks (RMIT U., Australia)

Fermi Level Shift Of Polycrystalline Ito And Amorphous Izo Thin Films

Junjun JIA, Aiko Takasaki, Nobuto Oka, Yuzo Shigesato (Aoyama Gakuin U., Kanagawa, Japan)

Artificial Pinning Center Technology To Enhance Flux Pinning In High-Tc Superconductors

K. MATSUMOTO (Kyushu I.T., Japan)

W-Doped TiO2 Thin Film Based On Heterojunction Substrate for O2 Sensor Applications

Huijun ZHANG, Tingyu Han, Xiaolei Sun, Wen Zeng, Zhiyuan Dong, Dianzhong Wen (Heilongjiang U., Harbin, China)

Carrier Mediated Room Temperature Ferromagnetism in Nb Doped Anatase TiO2

Jiyong Yang, Y.L. Han, H. Zheng, P.H. Zhao, Jiacai NIE (Beijing Normal U., China)

Optical And Electrical Study Of Few-Atomic-Layer Boron Nitride Sheets For Light Harvest

Application Muhammad Sajjad, Peter X. FENG (U. Puerto Rico)

Photoluminescence Intensity Decay In Semiconductor Quantum Dots With Indirect Gap

Karel KRAL, Miroslav Mensík (Acad Sci Czech Rep., Prague)

Graphene Quantum Dots Derived From Multi-Wall Carbon Nanotubes Huafeng SUN (Beijing Jiaotong U., China), Li Zhang (Beijing Inst.Tech.), Shengjie Yang

(Beijing Jiaotong U.), Jinquan Wei (Tsinghua U., Beijing), Shengyi Yang (Beijing Inst.Tech.)

Effect of Oxygen Vacancies On Photoresponse Time Of Optoelectronic Devices Based on β-Ga2O3

Hetroepitaxials R.H. HORNG, P. Ravadgar (Nat. Chung Hsing U., Taichung), L.W. Tu

(Nat. Sun Yat-Sen U., Kaohsiung)

Nanocomposite High Anisotropy FePt Films For Ultra-High Density Magnetic Recording

Jingsheng CHEN, G.M. Chow (Nat.U. Singapore) invited Wed-Thurs

Strain-Tunable Band Gap Of A Monolayer Graphene Analogue Of ZnS Monolayer Harihar Behera, Gautam MUKHOPADHYAY (Indian Inst.Tech., Bombay)

Effect Of The Processing Of Injection Molded Stainless Steel Fiber Filled-Polymer Composite On

Microstructure And Resistivity Jianxiu Liu, Aiyun JIANG, Jingchao Zou, Baofeng Zhang,

Haihong Wu (Huanghe Sci Tech. Coll., Zhengzhou, China)

Fracture-Induced Surface Patterning On Polymeric Films

Pei-Yu LIANG (Nat. Tsing Hua U., Hsinchu), Fuqian Yang (U. Kentucky), Anboh Lee

(Nat. Tsing Hua U., Hsinchu) POSTER

Preparation And Characterization Of Highly Transparent And Conductive Indium-Zinc Oxide

Nanostructure Thin Films Deposited By Pyrolysis Spray Technique

R. Dounia, M. ADDOU (U. Sultan Moulay Slimane, Morocco), J.C. Bernede

(U. Nantes, France)

Molecular Dynamics Simulation Of Ultrathin Lubricant Films Under Laser Heating Exposure

Qiubo Chen, Bei Li, Chee How WONG (Nanyang T.U., Singapore)

Activation Of Silicon Quantum Dots For Emission Wei-Qi Huang, Xin-Jian Miao a), Zhong-Mei Huang (Guizhou U., Guiyang, China),

Shi-Rong Liu, Chao-Jian Qin (Inst.Geochem., CAS, Guiyang, China)

Effect of Oxygen Precipitation in Annealed Electron Irradiated Czochralski Silicon Lili CAI (N.China Inst Sci Tech, Yanjiao, Beijing), Chen Guifeng (Hebei U.T., Tianjin,

China)

Characterization Of Blue Organic Light Emitting Diodes Made By Vacuum Evaporation

Nang-Dinh NGUYEN, Duc-Cuong Nguyen, Ngoc-Chung Do, Thi-Thao Tran (Vietnam Nat. U., Hanoi)

Transparent Magnetic Polymer Nanocomposites: Synthesis, Properies and Some Potential

Applications Mingjun HU, Robert K. Y. Li (City U., Hong Kong, SAR)

Thickness Effects on the Structural And Optical Properties of ZnO Films Prepared by Radio

Frequency Magnetron Sputtering Dapeng Wang, Toshiyuki Lawaharamura, Mamoru Furuta,

Akimitsu Hatta, Chaoyang LI (Kochi U.T., Japan) invited 23 min

Comparison of Two Antiferromagnetic Phases of Fe Monolayer in LaOFeAs

Huaiyu WANG (Tsinghua U., Beijing, China)

First-Principle Calculation of Hybrid Conductive Nanowires

Chengyu Yang, Quanfang CHEN (U. Cen Floria, Orlando)

Effects of Substrate Temperature on Magnetostriction of Fe62Co19Ga19/Si(100) Films

T.L. TSAI, C.C. Liu, S.U. Jen (Acad Sinica, Taipei), J.Y. Juang (Nat. Chiao Tung U., Hsinchu), P.C. Kuo (Nat Taiwan U., Taipei)

Fabrication Of Polymer/Titania Hybrid Thin Films Via Low Temperature Sol-Gel

Synthesis For Application In Photovoltaics

Martin A. NIEDERMEIER (TU Munich, Germany), Monika Rawolle, Philipp Lellig, Volker Koerstgens, Eva M. Herzig, Adeline Buffet, Stephan V. Roth,

Jochen S. Gutmann, Thomas Fröschl, Nicola Hüsing, Peter Müller-Buschbaum

(Germany)

Towards The Quantum Limits In Scaling Of Electronic Devices

Waldemar NAWROCKI (Poznan U.T., Poland)

Ta Capping and/or Barrier Layer Effect On Magnetostriction Of the Fe62Co19Ga19 Films

S.U. JEN, T. L. Tsai, C. P. Chu (Acad Sinica, Taipei, ROC)

Magnetic Structure Of Nanocrystallized Nickel Thin Films Electrodeposited On ITO Substrate L. Nzoghe-Mendome, Jean EBOTHE (U. Reims, France) invited 23 min,

chair

Quantum Discrete Breathers in Ferroelectrics in Klein-Gordon Lattice Arindam BISWAS (W.B. Univ.Tech., Dumkal, India), Bijoy Mandal (Durgapur, India),

Subhro Jyoti Mandal, Arghya Dey, Reshmi Basu, Kamal Choudhary,

A.K. Bandyopadhyay (Dumkal, India), A.K. Bhattacharjee, D. Mandal (Durgapur)

Characterization Of Superhard Nanolayered TiN/BCN Coatings

V.I. ІVASHCHENKO, P.L. Scrynskyy, A.I. Kuzmichev, L.A. Ivashchenko, O. Yu. Khyzhun,

O.O. Butenko (NAS, Kiev, Ukreaine) poster

MATHEMATICAL MODELING or MECHANICS

Bending Collapse Behavior of Aluminum-CFRP Hybrid Beam under Transverse Quasi-Static

Loading Hee Chul Kim, Dong Kil Shin, Jung Ju LEE (KAIST, Daejeon, S. Korea)

Optimum Operating Conditions Of Nano-Ceria Particles By Rapid Expansion of Supercritical

Solution Method Pao-Chi CHEN, Mu-Hsuan Lin (Lunghwa U.Sci.Tech., Taoyuan)

Multiscale Prediction Of Biaxial Failure Envelopes Of Composite Laminates Using Finite-Volume Micromechanics Zhanwen TANG (Harbin I.T., China), Boming Zhang (Beihang U., Beijing,

China), Wenqiong Tu, Marek-Jerzy Pindera (U. Virginia)

Damage Mechanics Of Composite Materials Via Finite-Volume Micromechanics Wenqiong Tu (U. Virginia), Zhanwen Tang (Harbin I.T., China), Marek-Jerzy Pindera

(U. Virginia)

Molecular Dynamics Simulation Of Thermal-Desorption And Decomposition Of Lubricant Films

Bei LI , Qiubo Chen, Chee How Wong (Nanyang T.U.)

A Piezo-Elastodynamic Model For Guided Wave Generation And Propagation In Prestressed

Plates Guoliang HUANG, F. Song (U. Arkansas, Little Rock) invited

Estimation Of Mechanical Properties Of Nano-Layered Material Using Molecular Dynamics

Simulation Takuya UEHARA, Masayuki Watanabe (Yamagata U., Japan) Tues-Wed

Modal Analysis Of The Rear Module Of An Hybrid Bus With Composite Sandwich Panels

Paulo C. NEVES, Antonio A. Fernandes (Inst Eng.Mecanica, IDMEC, Porto, Portugal)

Free Vibration Analysis Of Two Dimensional Functionally Graded Plates Based On Three

Dimensional Theory Of Elasticity And Graded Finite Element Method

Kamran Asemi, Manouchehr SALEHI, Mehdi Akhlaghi (Amirkabir U.T., Iran)

Design and Analysis of a Wing Structure with Static Aeroelastic Effect for Optimal Performance Zexu SUN (COMAC, Shanghai, China), Shijun Guo (Cranfield U., UK),

Qiang Fu (COMAC, Shanghai, China)

Computational Model Of Effective Fibers On Toughening In Fiber Reinforced Composites

At An Early Stage Of Crack Formation Chong WANG, Leandro Ferreira Friedrich (Fed U. Pampa, Brazil)

A 2D FEM Model To Show The Variation In Particle Distribution In A Functionally Graded

Material With Random Distribution Of Particles K.K.S. MER (G.B. Pant Engrg.Coll., Uttarakhand, India)

3D Stress Analysis in Laminated FRP Composite Tee Joint with Varied Material

Anisotropy and Fiber Orientation Angle Sunil Nimje, S.K. PANIGRAHI (Deemed U., Pune, India)

Stacking Optimization for CLD Laminate Plates with Distributed Loads

G.M. LUO, T.Y. Hsieh (Nat. Kaohsiung Marine U., Kaohsiung)

Behavior Of Fiber Composites At Low Strain Rates Dahsin LIU, Guojing Li (Michigan St.U.)

A Hypergraph-Based Method For Hierarchical Modular Decomposition

Yan-qiu Xiao, He ZHAO, Lei Wang (Zhengzhou U. Light Ind., China)

An Investigation On Surface Roughness In Turning Hybrid MMC (Al/SiCp/B4Cp) by Taguchi

Experimental Technique and S/N-ANOVA Analysis Satish MITHUN, Murtaza Laila,

Madhu Sudhan (India)

Numerical Modeling Of Carbon Nanotube Structures

Ante AGIC, Veljko Filipan (U. Zagreb, Croatia)

Performance Prediction For Mesh Reinforced Membrane

Changguo WANG, Zhenyong Du, Lei Zhang, Huifeng Tan (Harbin Inst. Tech., China)

Numerical Modal Analysis Of An Embedded Carbon Nanotube In A Polymer Matrix

Roham RAFIEE (U. Tehran, Iran), Reza Maleki (Semnan U., Iran)

Impact of CNT and CNT Network Morphological Parameters On The Effective Mechanical Properties Of CNT-Reinforced Composites Willy LeCLERC, Philippe Karamian,

Alexandre Vivet, Alain Campbell (U. Caen Basse-Normandie, France)

Geometrically Nonlinear Free Vibration of Functionally Graded Plates

Satyajit PANDA (Indian Inst.Tech., Guwahti)

Optimal Design of Composite Panels in Three Types of Reinforcement Against Buckling

Huahua PANG (First Aircraft Inst, Xi’an, China), Shijun Guo, Qiang Fu (Cranfield U., UK)

Parametric Study Of Soil Water Characteristic Curve Model Sheng-Huoo NI, Yu-Zhang Yang, Men-Ying Wang (Nat. Cheng Kung U., Tainan)

Bending Strength Study For The Sandwich Beams With Glass/ Polypropylene Faces And

Aluminum Foam Core Yi-Ming JEN, Zih-He Tang (Nat. Taiwan Ocean U., Keelung)

Blast Load Response Of Ship Hull Laminated Plates With Imperfections

Ionel CHIRICA, Elena-Felicia Beznea (U. Dunarea Galati, Romania)

Shear And Axial Buckling Behaviour Of The Delaminated Ship Deck Plates

Elena-Felicia BEZNEA, Ionel Chirica (U. Dunarea Galati, Romania)

Numerical Analysis Of The Mechanical Properties Of Circular Cell Honeycombs

Ting-Chun Lin, Jong-Shin HUANG (Nat. Cheng Kung U., Tainan)

Vibrational Frequencies And Raman Radial Breathing Modes Of Multi-Walled Carbon Nanotubes Based On Continuum Mechanics Toshiaki NATSUKi, Qing-Qing Ni (Shinshu U., Nagano,

Japan)

Target Estimation Algorithm of Correlation Matrix in Adaptive Array Antennas Kwan Hyeong Lee (Daejin U., Gyeonggi, S. Korea)

Nonlinear Cascade In Aliasing-Free Space Compression Revisited

Sunil R. DAS (Troy U., Montgomery, AL), Satyendra N. Biswas (Dhaka, Bangladesh),

Voicu Groza (U. Ottawa, Canada), Mansour H. Assaf (U. South Pacific, Fiji), Irem Ozkarahan , Scott Morton (Troy U.) Tues-Wed

Vibration Response Of Soft Core Sandwich Beams

J. Suleman (Jet Aviation, Switzerland), S. Monzon (Lockheed Martin, USA), Q. Liu

(Henry Jackson Foundation, USA), Yi ZHAO, M. Mirmirani (Embry-Riddle Aero U., Dayton Beach, FL)

Study On Stress Singularity Of Multi-Material Mode Iii Cracks Using The Symplectic Dual

Approach Weian YAO, Xiaofei Hu, Qiang Gao (Dalian U.T., China)

Transverse Crack In Asphalt Composites Of Road Structure

Sadjad PIRMOHAMMAD, Majid Reza Ayatollahi, Karo Sedighiani (Iran U. Sci Tech, Tehran)

Influencing Factors On Damping Property in CR/PVC and IIR/PVC Polymer Composites Kong-cheng Zuo, Lin Zhang, Xin-Biao Xiao (Southwest Jiaotong U., Chengdu, China),

David Hui (U. New Orleans), Minhao ZHU (Southwest Jiaotong U.,)

Stress Analysis Of Penny-Shaped Crack Considering The Effects Of Surface Elasticity

P. Intarit, T. SENJUNTICHAI, J. Rungamornrat (Chulalongkorn U., Bangkok), R.K.N.D. Rajapakse (Simon Fraser U., Burnaby, Canada)

Material Characterization of Viscoelastic Core Materials in Sandwich Structures,

C.M. MOTA SOARES, A.L. Araujo, C.A. Mota Soares (TU Lisbon, Portugal), J. Herskovits (Fed U. Rio de Janeiro, Brazil)

Self-Healing Of Bond Characteristics At The Interface Between Fiber And Matrix

Dong Joo KIM (Sejong U., Seoul, S. Korea), Tae-Ho Ahn (U. Tokyo, Japan), Seok Hee Kang (Sejong U.)

Elastoplastic Analysis of a Functionally Graded Beam Subjected to Pure Bending

Huimin YIN, Guojun Nie (Tongji U., Shanghai, China)

Effective Properties Of Composites With Imperfect Contact Guillermo MONSIVAIS (UNAM, Mexico), Jose A. Otero (ICIMAF, Habana, Cuba),

Reinaldo Rodriguez-Ramos (U. Habana, Cuba)

Nonlocal Refined Plate Theory For Buckling Of Nanoplates Huu-Tai THAI, Dong-Ho Choi, Sun-Gil Gwon (Hanyang U., Seoul, S. Korea)

A Nonlocal Refined Plate Theory For Vibration Of Nanoplates

Dong-Ho CHOI, Huu-Tai Thai, Ho-Sung Na, Jihoon Pyo (Hanyang U., Seoul, S. Korea)

Improving The Strength Of Abs 400 Material Using Design Of Experiment Andrew Dominguez, Rafiq NOORANI (Loyola Marymount U., Los Angeles, Calif.) Tues-Wed

Linear Elasticity Of Single-Walled Nanotubes

Aliaksandr AKAVITY (Belarusian St.U., Belarus)

Second-Order Two-Scale Simulation For Bending Behaviors Of Composite Plate With 3-D Small

Periodic Configuration Ziqiang Wang , J.Z. CUI (CAS, Acad Math Sys.Sci., Beijing,

China)

Stress Analysis Of The Outwater-Murphy Fiber/Matrix Debond Specimen

C.T. TSAI, M.U. Farooq, L.A. Carlsson (Florida Atlantic U., Boca Raton)

Second-Order Two-Scale Analysis Method for the Conductive Transfer Problem with Radiation

Boundary Condition in Periodically Porous Materials Qiang MA, Junzhi Cui (CAS, Acad Math Sys.Sci., Beijing, China)

Coupled Flexural-Torsional Vibration of Delaminated Beams Subjected to Axial Loads

and Static End Moments Yang LIU, Dongwei Shu (Nanyang T.U., Singapore)

Progressive Failure and Post-buckling Response of Tapered Composite Plates

Rajamohan GANESAN, Dai Ying Liu, Shaikh Akhlaque-E-Rasul

(Concordia U., Montreal, Canada)

Sub-harmonic and Super-harmonic Response Analysis of Fixed-Free Single Walled

Carbon Nano Tube Anand Y JOSHI, Ankit Gupta, Satish C Sharma, S.P. Harsha

(IIT Roorkee, India)

Radial Basis Functions Collocation for the Analysis of Laminated and Plates, According to a Zig-Zag Theory Antonio J.M. FERREIRA, A.M.A. Neves, E. Carrera, M. Cinefra,

C.M.M. Soares, R.M.N. Jorge (U. Porto, Portugal)

Impact Energy of Aluminum Weldments Using Double Shoulder Friction Stir Welding

M.A. Shahenda, Ebtisam F. Abdel-GWAD, Soher Samy (Port-Said U., Egypt)

Investigating The Behaviour Of A Magneto-Electro-Elastic Sandwich Construction

K.M. GUPTA, Mahesh C. Kaushal (MNNIT, Allahabad, India)

Uncertainty Analysis Of Fiber-Reinforced Laminated Composite Beams Using Fuzzy Finite Element Approach Singiresu S. RAO (U. Miami, Coral Gables, FL)

A State Space Differential Reproducing Kernel Method For Functionally Graded Material

Sandwich Cylinders Chih-Ping WU, Ruei-Yong Jiang (Nat. Cheng Kung U., Tainan)

Study Of The Variation Of Empirical Parameters Of Creep Of A Composite Material With

Temperature Ahmed KOUADRI-Boudjelthia, A. Bouabdallah, Abbes M. Tahar

Modeling Of Creep Behaviour Of A Composite Material

Ahmed KOUADRI-Boudjelthia, A. Bouabdallah, M. Tahar Abbes (USTHB, Algeria)

Development Of Simplified Unit Cell Method For Micromechanical Analysis Of Viscoelastic-

Viscoplastic Composite Materials Saeed Masoumi, Hassan Behzadpoor,

Monouchehr SALEHI (Amirkabir U.T., Iran)

Development Of Simplified Unit Cell Method For Micromechanical Analysis Of Viscoelastic-

Viscoplastic Composite Materials Saeed Masoumi, Hassan Behzadpoor,

Monouchehr SALEHI (Amirkabir U.T., Iran)

Material Selection And Continuty Issue On Surface Of Multi-Layer Insulation

Amir H. MASSOUDI, David M. Dreisbach (AR Tech., Fontana, Calif.) poster

METALS or METALLURGY

Microstructure And High Temperature Anti-Oxidation Performance Of Amorphous AlPO4

Coating Formed On TA15 Alloy Hong TIAN, Yaming Wang, Zixuan Zhu, Jiahu Ouyang, Dechang Jia, Yu Zhou, Lixin Guo (Harbin I.T., China)

Ablation of Hybrid Metal Matrix Composites

D. Weiss (Eck Insdustries, Manitowoe, WI), B. Schultz, Pradeep K. ROHATGI (U. Wisconsin- Milwaukee)

Mechanical Properites Of Spary-Formed Al-Si Alloys

C.–H. Chiang, Chi Y.A. TSAO (Nat. Cheng Kung U., Tainan)

Investigation on Performing Features of Triple-Cathode Plasma Surface Alloying System

Xingfu RONG, Zhiyu Qin (Taiyuan U.T., China), Shuo Rong (Shanxi U., Taiyuan, China)

Prediction Of Grinding Machinability When Grind P20 Tool Steel Using Engineered Nano Fluid

Coolant K. KADIRGAMA, M.M. Rahman, W. Azmi. K.V. Sharma (U. Malaysia Pahang)

Mathematical Modeling Of Material Removal Rate On Ti-5Al-2.5Sn With Positive Copper-

Tungsten Electrode Through Edm Mustafizur M. RAHMAN, Md. Ashikur Rahman Khan,

K. Kadirgama (U. Malaysia Pahang)

Mechanical Responses Of High Phosphorous Electroless Ni-P Coatings Deposited on Al 7075-T6

Mohamed A. RAHMAT (Monash U., Australia), R.H. Oskouei (Flinders U., Bedford Park,

Australia), R.N. Ibrahim (Monash U.)

Structure Of Magnetic Fluids On The Base Of Ga-In(Sn) Eutectic Melts. I. Shtablavyi, Stepan MUDRY, O. Kovalskyi (Nat U. Lviv, Ukraine)

Relation Of Short-Range Order And Thermodynamic Data in Li-Sn Alloys

Stepan MUDRY (Ivan Franko N.U., Lviv, Ukraine), Andriy Yakymovych, Herbert Ipser

(U. Vienna, Austria)

Metal-Metal Bonding Process Using Silver/Copper Nanoparticles

Yoshio KOBAYASHI, Tsukasa Shirochi (Ibaraki U., Japan), Yusuke Yasuda, Toshiaki Morita

(Hitachi Ltd., Ibaraki, Japan) Mon-Tues

Mechanical and Tribological Evaluation Of Different PVD Coatings Deposited On Structural Steel

16MnCr5 Attila VANYA, Miroslav Bosansky, Maria Hudakova, Ľubomir Caplovic

(Slovak U.T., Bratislava, Slovakia)

Effect of Cooling Condition On Tensile Properties Of Aged Ti-7.5Mo Alloy

Yen-Chun Chen, Chin-Chin CHUNG, Yuan-Sen Tsai, Chien-Ping Ju, Jiin-Huey Chern Lin

Immersion-Induced Property Changes In A Calcium Sulfate Cement

Wei-Luen CHEN, Jing-Wei Lee, Chien-Ping Ju, Jiin-Huey Chern Lin

(Nat. Cheng Kung U., Tainan)

Immersion-Induced Property Changes In A Calcium Phosphate-Calcium Sulfate Composite

Cement Chang-Keng CHEN, Sen-Hsiang Hung, Chien-Ping Ju, Jiin-Huey Chern Lin

(Nat. Cheng Kung U., Tainan)

Effect Of Fe Doping On The Properties Of Sr2Co1-XFexMoo6 Double Perovskite As Cathode

Materials For Oxygen Reduction In Alkaline Environment Kahoul ABDELKRIM, Cheriti Mabrouk (U. Abbas Setif, Algeria)

Study On Wear-Resisting Of SiC Particles Reinforced Aluminum Matrix Composites By Ultrasonic

Stirring Xiu-Hong WANG, Yu-hui Zhang, Hong-xia Gao (Zhengzhou U. Light Industry, China)

Effect Of Aluminium Particles Added in Ap/HtPb Solid Propellant On The Radiative Heat

Transfer – A Numerical Study Hui Ying WANG (U. Poitiers, France), Fabien Chassagne, Serge Bordachar (DGA, France), Pierre Joulain (U. Poitiers, France)

Preparation Of Continuous Si3N4 Reinforced 2024 Aluminum Alloys Composites By Pressure

Infiltration Method Qiang LIU, Feng Ye, Shichao Liu, Zhaoping Hou, Biao Zhang

(Harbin I.T., China)

The Effect Of Cobalt-Alloy Surface On The Formation Of Mineral Tissue Julio JUAREZ , M. Alvarez, O. Alvarez (UNAM, Mexico) Mon-Thurs

Wear Resistance of Alumina Fiber and Particle Reinforced Metal Matrix Comosites

Tong Wang, M. Shozaki, M. Yamamoto, Akio KAGAWA (Nagasaki U., Japan)

WC-W2C Composites Production By Eutectoid Decomposition Of Arc Plasma Melt-Cast Of

Tungsten and Tungsten Carbide Mixture Bijan B. NAYAK, T. Dash, B.K. Mishra (CSIR, Bhubaneswar, India)

Formation Of Ultrafine Eutectic In Hypereutectic Alloys Produced By Heat Treatment Of Nickel

Coated Aluminium Substrate Ladislav CELKO, Lenka Klakurkova (TU Brno, Czech Rep.), Bedřich Smetana (TU Ostrava, Czech Rep.), Karel Slamecka (TU Brno), Monika Zaludova

(TU Ostrava), Jiri Svejcar (TU Brno)

Machinability Assessment Of Local Steel AISI 1035 In Turning Process Using Coated Carbide Tools J. El-Taybany (Port Said U., Egypt), Dr. M. Abdel Salam (Ain

Shams U., Egypt), S.M.I. ABDOU, A.A. Al-Baghdady (Port Said U.)

Estimation Of The Particle Aspect Ratio Effect On The Young´S Modulus For Al-Alloy/SiCp

Composites Ismeli ALFONSO (U.Auto Carmen, Campeche, Mexico), Ignacio A Figueroa (UNAM, Mexico), Juan Manuel Sierra, Mohamed Abatal

(Campeche), Gonzalo Gonzalez (UNAM), Vladimir Rodriguez

(Campeche), Ariosto Medina (UMSNH, Mexico), Jose Flores (U.A. Carmen)

Cutting Performance And Wear Characteristics Of TiCN-Coated Insert In Turning Of

Hardneded Steel R.J. TALIB, A.M. Zaharah, M.A. Selamat, A. A. Mahaidin,

M.F. Fazira (AMREC, Kulim, Malaysia)

Metal Matrix Syntactic Foams: A Demonstration Of Manufacturability And Economic Viability Of Lightweight Automotive Components Pradeep K. ROHATGI,

Benjamin F. Schultz (U. Wisconsin-Milwaukee), Dung D. Luong, Dinesh Pinisetty,

Nikhil Gupta (New York Polytechnic, Brooklyn, NY)

NANO COMPOSITES and PROCESSING of Nanomaterials

Characterization of Mechanical Properties : Low Density Polyethylene Nanocomposite Using Nano

Alumina Particle As Filler Ching Yern CHEE (U. Malaya), N.L. Song, Luqman Chuah Abdullah, S.Y. Choong, Azowa Ibrahim (U. Putra Malaysia),

T.R. Chantara (Kajang, Malaysia)

How To Manage Nanomaterials Safety In Research Environment?

Amela Groso (Ecole Polytech, Lausanne, Switzerland), Alke Petri-Fink (U. Fribourg, Switzerland), Arnaud Magrez, Michael Riediker (Lausanne), Thierry MEYER (Ecole Polytech.

Lausanne, Switzerland)

Low Temperature Ferromagnetic Cobalt Boride Nanocomposites As Catalysts For Hydrogen Production V.I. SIMAGINA, А.М. Ozerova, О.V. Komova, О.V. Netskina, G.V. Odegova

(Boreskov Inst, Novosibirsk, Russia,, D.G. Kellerman (Inst Solid State Chem., Ekaterinburg,

Russia)

Mechanical Behavior of Nano-Arrays with Surface Effects and Casimir

Fan YANG, Gang-Feng Wang (Xi an Jiaotong U., China)

Thermal And Morphological Analysis Of Inorganic Silica Nanoparticle Doped Graphene

Oxide/Epoxy Nanocomposites Tongwu JIANG,Tapas Kuila, Zhang Hang, Nam Hoon Kim, Joong Hee Lee (Chonbuk Nat. U., Jeonbuk, S. Korea)

Mechanical Behavior Of Graphene/Polyethersulfone Nanocomposites

T. FORATI (Isalamic Azad U.,Tehran, Iran), M. Atai, M. Omidi, A.M. Rashidi, M.Imani, A. Behnamghader (Tehran, Iran)

Kinetics of Propylene Aromatization on Pt-Cu /β-Al2O3 Nano Catalyst

J Soji ADEYINKA, I.J. Otaraku (U. Abuja, Nigeria)

Electrochemical Properties of Li2MnSiO4/C Nanocomposite Prepared By Sol-Gel Method

Shuangke LIU, Jing Xu, Kai Xie (Nat. U. Def. Tech., Chansha, Hunan, China)

Effect Of Intercalation With Clay Nanocomposite On The Surface Properties Of PVC Batbaatar Tsegmid (Mongolian U.Sci.Tech., Darkhan), Musa Sowe

(U. Gambia, Kanifing), Dashdondog OYUNBILEG (Mongolian U.Sci.Tech.)

Nanoindentation Characterization Of A Hybrid Nano Geomaterial Rohit Pant (Louisiana St.U.), Jialai Wang (U. Alabama, Tuscaloosa), Liming Hu

(Tsinghua U., Beijing, China), Guoping ZHANG (Louisiana St.U.)

Mesostructural Catalysts For Simultaneous Production Of Hydrogen And Carbon Nanotubes

Jin-An Wang, L.F. Chen, R. Sotelo (ESIQIE, Mexico City)

Degradability Of Injectable Hydoxyapatite / Collagen Nanocomposite

Masanori KIKUCHI (NIMS,Tsukuba, Japan), Akinori Kochi, Yuki Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka (Okayama U., Japan)

Application Of Carbon Fiber–Nanotube Hybrid In Polymer Composites

Mukul KUMAR (Meijo U., Nagoya, Japan), Takeshi Hasimoto (Meigo Nano Carbon Co.),

Tomohiro Yamaguchi, Yoshinori Ando (Meijo U.) Tuesday

Carbon Nanotubes/Graphite/SS316 Powder/Polypropylene Nanocomposite: Rheology And

Mechanical Properties Abu Bakar SULONG, Mohd Ikram Ramli, Seow Liang Hau,

Norhamidi Muhamad (UKM, Kuala Lumpur, Malaysia)

Synthesis of Ag and PdAg Nanoparticles in CO2-Expanded Liquid

Hui-Hsien Wei, Hsien-Te Hsieh and Chung-Sung TAN (Nat. Tsing Hua U., Hsinchu)

Microstructure, Vertical Strain Control and Tunable Functionalities in Self-Assembled Vertically Aligned Nanocomposite Thin Films Aiping Chen, Wenrui Zhang, Zhenxing Bi, H. WANG

(Texas A&M U., Coll.Stn.)

Synthesis and Characterization Of Polyimide-Carbon Nanotube Composites

Naidu V. SEETALA, Cassandra R. Hendon, Naeem Tull-Walker (Granbling St.U., LA), Johan Van Behr, Barry Hester (Southern U., Shreveport, Louisiana), Marisabel Lebron-Colon,

Michael A. Meador (NASA Glenn, OH)

A Study Of Wetting Characteristics Of Carbon Nanotubes/Epoxy On Carbon Fiber Surface F. Oroojalian, Meisam OMIDI (U. Tehran, Iran), M. Ranjbartaznji , M. Alagheband (Iran)

Thermogravimetric Analysis Of Polystyrene –VGCNF Nanocomposites

Yun Zhai, David Hui (U. New Orleans), Magdalena Dorina Chipara, Karen Lozano, Mircea CHIPARA (U.Texas Pan Am, Edinburg)

The Uniform Mono-Dispersed 10 nm ITO Nanoparticle Form Process Research: From Nanometer

Flower To Nanometer Particle Lanlan. Yu (Northeast Petroleum U., Daqing, China),

Lihong.SU (Northwestern Poly U., Xi an, China), Yanling Ai, Yiguang Wang, Jiaoqiang Wang, Baohui Wang, Xu Zhao (Northeast Pet U.)

Synthesis And Spectroscopic Characterization Of Copper Doped Nano Apatite

S. Lakshmi REDDY, G. Udayabashakar Reddy (Kadapa, India), Tamio Endo (Mie U., Japan)

Growth of Diamond-Like Carbon Films on Silicaon Substrate by Various Carbon Clkuster

Assemblies Tei-Chen CHEN, Ming-Chiao Liu (Nat. Cheng Kung U., Tainan), I-Chieh Chen

(Nat. Cheng Kung U. Hospital)

Pulsed Plasma Synthesis of Nickel Nanorod and its Surface Morphology Soemsak YOOYEN, Takahiro Kawamura, Shigeo Kotake, Yasuyuki Suzuki (Mie U., Japan)

Mechanical and Thermal Properties of Mica/Polypropylene Nanocomposites

by Melt Intercalation Method Yun-Yun Sun (Tung Fang Design U.,Kaohsiung), Chin-Hsing CHEN (Chinese Culture U., Taipei) Mon-Wed

Nanoscale Processes Simulated by Transforms and Image Processing Methods

Nina Mirchin, Aaron Peled (Holon Inst Tech., Israel), Jacob AZOULAY (Hadassah Acad, Israel)

Synthesis And Characterization Of Nano-TiO2 Particles From Low-Grade Mineral

Precursors Mahdi E. MAHMOUD, M. Hamdi A. Shukor, M.Y.M. Sulaiman

(U. Malaya, Kuala Lumpur, Malaysia)

Microfluidics and MicroGISAXS – In Situ Characterization Of Nanostructures At The

Solid-Liquid Interface Volker Koerstgens, Kuhu Sarkar (TU Muenchen, Germany),

Adeline Buffet, Matthias Schwartzkopf, Stephan V. Roth (Hamburg, Germany), Peter Müller-Buschbaum (TU Muenchen)

Atomic Force Acoustic Microscopy Nanomechanical Characterization Of Glass Fiber

Reinforced Composites Xilong ZHOU, Faxin Li (Peking U., Beijing, China)

Compatibility Investigations of Pure and nano-filled Acrylonitrile Butadiene Rubber/

Styrene Butadiene Rubber Blends Ebtesam ATEIA, H. H. Hassan, D.E. El-Nashar,

N.A. Darwish, A.K. Abd El-Aziz (Cairo U., Egypt)

On Characterization Of Nanocomposite Coatings By Indentation Technique Roberto CONTRO, P. Vena, D. Gastaldi, E. Bertarelli, D. Carnelli, M. Beghi,

F. di Fonzo (Polytec. Milano, Italy)

Effect Of Carbon Matrix On Mechanical Property Of Fast-Carbonized Carbon-Carbon

Composite Chien-Ping JU, M.H. Sun, H.Y. Lin (Nat. Cheng Kung U., Tainan), K.J. Lee (I-Shou U., Kaohsiung), J.H. Chern Lin (Nat. Cheng Kung U.)

The Preparation Of Nanocellulose By Acid Hydrolysis

Wei WEI (Southwest Jiaotong U., Chengdu,China)

Lignin Degradation in Sub-critical Water

Mengmeng ZHAO (Southwest Jiaotong U., Chengdu,China)

Preparation And Characterization Of Helical Carbon Fiber By Heat Treatment Of Organic Helical Fibers Dingchuan WANG (Southwest Jiaotong U., Chengdu,China)

The Research On Methods Of Dissolving Cellulose

Shimeng LIU (Southwest Jiaotong U., Chengdu,China)

Influence Induced By N-Doping On The Electronic Properties Of Graphyne Fanchen MENG (Southwest Jiaotong U., Chengdu,China)

Progress Of The Lignin Composite Materials

Chunyu MU (Southwest Jiaotong U., Chengdu,China)

Failure Behavior Of MWCNT Reinforced Amorphous Polyimide Composites

Baode ZHANG (Harbin I.T.), David Hui (U. New Orleans), Wanchen Zang (Jilin U., China), I.V. Gofman (St. Petersburg, Russia), Yao Li (Harbin I.T.)

The Effect Of MWCNT Introduction On The Mechanics Of Semi-Crystalline Polyimide/MWCNT

Nanocomposites Baode ZHANG (Harbin Inst.Tech., China), David Hui (U. New Orleans),

Wanchen Zang (Jilin U., Alan G. MacDiarmid Inst., China), I.V. Gofman, Tatiana Sukhanova (St. Petersburg, Russia), Yao Li (Harbin I.T.)

A Study of Urea/Graphite Oxide Composites for Hydrogen Storage Behaviors Seul-Yi Lee, Soo-Jin Park (Inha U., Incheon, S.Korea)

Preparation and Characterization of Activated Microporous Carbons for Hydrogen Storage

Capacity Seul-Yi Lee, Soo-Jin Park (Inha U., S. Korea)

Polyethyleneimine Modified Graphene Nanosheets for CO2 Capture

Long-Yue Meng, Soo-Jin Park (Inha U., S. Korea)

Carbon Dioxide Adsorbent Based on Electrospun MgO-templated Carbon Nanofibers

Long-Yue Meng, Soo-Jin Park (Inha U., S. Korea)

Preparation and Characterization of Coal Tar Pitch-based Carbon Fibers Gun Jung, Changwoon Nah (Chonbuk N.U., S. Korea), Min-Kang Seo (Jeonju, S. Korea),

Soo-Jin Park (Inha U., S. Korea)

Effect of Fluorination on Electrochemical Performance of Coal Tar Pitch-based Activated Carbons

for EDLC Ji-Hoon Huh, Hak-Yong Kim (Chonbuk N.U., Jeonju, S. Korea), Min-Kang Seo (Jeonju, S. Korea), Soo-Jin Park (Inha U., S. Korea)

Mechanical Properties of Biodegradable Epoxy Nanocomposites Reinforced with Fluorinated CNT

Yoon-Ji Yim, Hak-Yong Kim (Chonbuk N.U., Jeonju, S. Korea), Min-Kang Seo (Jeonju, S. Korea), Soo-Jin Park (Inha U., Incheon, S. Korea)

Aqueous Gelcasting of ZrB2-SiC Ultra High Temperature Ceramic Composites Based On The

Gelation Of Sodium Alginate Xinghong Zhang, Rujie He, Ping Hu, Changqing Hong,

Chen Liu (Harbin I.T., China)

Low Temprature Sintering Of Nano ZrB2 By Mult-Step Sintering Without Additive

Yang Hou, Xinghong Zhang, Ping Hu (Harbin I.T., China)

Thermal Shock Resistance Of Porous ZrB2-SiC Ceramics

Xinxin Jin, Xinghong Zhang, Rujie He, Ping Hu, Wenbo Han, Changqing Hong (Harbin I.T., China)

Stucture And Property Of ZrB2/(Cu, Ni) Interpenetrating Phase Composites

Jiancong Du, Xinghong Zhang, Changqing Hong, Ping Hu, Wenbo Han (Harbin I.T., China)

OXIDE COMPOSITES

Synthesis And Characterization of PANDB/χ-Al2O3 Conductive Core-Shell Composites

Cheng-Ho CHEN, Yi-Ting Kan, Ching-Feng Mao, Ching-Dong Hsieh, Wei-Tung Liao (Southern Taiwan U., Tainan) Tues, Wed

Effect of MgO Characteristics On Synthesis Of Layered Magnesium Silicates

Fei JIN, Abir Al-Tabbaa (Cambridge U., UK)

Influence of Substrate on Zinc Oxide Nanostructures Grown by Thermal Annealing Xin LI, Chaoyang Li, T. Kawaharamura, D. Wang, M. Furuta, A. Hatta (Kochi U.T., Japan)

Thermal And Voltage Instabilities Of Hafnium Oxide Films Prepared By Sputtering

Technique H. WONG, B.L. Yang (City U., Hong Kong, SAR), Chengpeng Li, Chunfang FENG, Yongyue Luo, Zheng Peng, L.X. Kong (Deakin U., Geelong,

Australia)

Study On Nanoscale Structure Of Thin Oxide Thin Films M. Maleki, S.M. ROZATI (U. Guilan, Iran)

TEXTILE COMPOSITES or NATURAL or NANO FIBERS

Energy Absorption Mechanisms Of Natural Fibre Composites Paul Wambua (Moi U., Eldoret, Kenya), James Njuguna (Cranfield U., UK)

Simulation Of Textile Composite Reinforcement Forming. Analysis Of Wrinkling

Philippe BOISSE, Nahiene Hamila, Wang Peng (INSA Lyon, France)

Flex Fatigue Of Polymeric Optical Fibers

Jiri MILITKY, Dana Kremenakova (TU Liberec, Czech Rep.)

Study on the Modification of Nylon 66 with Glass Fiber and MAH-g-SEBS

Jianyun He, Pengcheng Xie, Zichen Xue (BUCT, Beijing, China), Chunyan Li, Yafei Lu (Key Lab Carbon Fiber Funct. Polymers, BUCT, China)

Preparation of UV-curable Organic-Inorganic Hybrid Nanocomposites from GPTMS Siloxane

Oligomer and SAP Jianyun HE, Yong Liu, Zicheng Xue (BUCT, Beijing, China),

Yafei Lu (Key Lab Carbon Fiber Funct. Polymers, BUCT, China)

Fabrication and EMI Shielding Efficiency Of Nano-Amorphous Composite Fibers J.F. Sun, Huan WANG (Harbin I.T., China), F.X. Qin (U. Bristol, UK), D.W. Xing

(Harbin I.T.), H.X. Peng (U. Bristol)

Formation of Refractory Nanofibers by Heat-Treatment of Poly(vinyl alcohol)-Inorganic Hybrids

Koji NAKANE, Nobuo Ogata (U. Fukui, Japan)

Flame Retardant for Natural Fiber Composites

Ahmed El-SABBAGH, L. Steuernagel, G. Ziegmann (TU Clausthal, Germany) Mon-Thurs

Notes on Thermal Analysis and Blowholes in Natural Fibres Thermalplastic Composites Ahmed El-Sabbagh, A. RAMZY, L. Steuernagel, G. Ziegmann (TU Clausthal), V. Siozios,

S. Passerini, M.Winters (W. Wilhelms U., Germany) Mon-Thurs

Predictions And Measurements Of Natural Frequency Shifts In Delaminated Braided Textile Composite Beams Benjamin M. DAUDA, A.A. Kogo (Ahmadu Bello U., Zaria,Nigeria),

S.O. Oyadiji, P. Potluri (U. Manchester, UK)

Tensile And Dynamic Mechanical Properties Of Pulp Fiber-Reinforced Thermoset Polymer

Composites Yicheng Du, Tongfei Wu, Ning Yan, Mark T. Kortschot, Ramin FARNOOD (U. Toronto, Canada)

Impact Of Organo-Nanoclay Modification Of Biofibers On Mechanical Properties Of Biofiber

Polymer Composites Jieming Chen, Ning YAN (U. Toronto, Canada)

Optimum Manufacturing Conditions of Oxidized PAN-based Electrospun Non-Wovens

Jhih-Wei WONG, Ching-Iuan Su, Chi-Wei Lin, Yen-Sheng Liu (Nat. Taiwan U Sci Tech.,

Taipei)

Natural Fiber/Wood Plastic Blends Modified By Copper/Carbon Core Shell Nanoparticles

(Cccsns) Qinglin WU (Louisiana St.U.), Kun Lian, Yadong Qi (Southern U ., Baton

Rouge)

Compressive Residual Strength Properties Of An Impact Damaged 3d Woven Orthogonal Hybrid Composite Ansar MAHMOOD, Xinwei Wang, Chuwei Zhou

(NUAA, Nanjing, China)

Condition Of The High Quality Impregnation Of Strengthening Woven Frameworks Of

The Composite Materials With The Chemical Binding Substance

Elena V. CHEPELYUK, Valeriy V. Choogin (Kherson Nat. T.U. Ukraine), David Hui

(U. New Orleans), Yuri Strzhemechny (Texas Christian U.) poster