IBM Tivoli Storage Manager for Databases: Data Protection ...Databases, Data Pr otection for Micr osoft SQL Server . Data Pr otection for Micr osoft SQL Server interacts with the IBM

IBM Tivoli Storage Manager for DatabasesVersion 7.1.3

Data Protection for Microsoft SQLServerMessages

IBM

IBM Tivoli Storage Manager for DatabasesVersion 7.1.3

Data Protection for Microsoft SQLServerMessages

IBM

Note:Before you use this information and the product it supports, read the information in “Notices” on page 31.

Fourth edition (September 2015)

This edition applies to version 7, release 1, modification 3 of the IBM Tivoli Storage Manager for Databases, DataProtection for Microsoft SQL Server (product number 5608-E04) and to all subsequent releases and modificationsuntil otherwise indicated in new editions.

© Copyright IBM Corporation 1995, 2015.US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contractwith IBM Corp.

Contents

About this publication . . . . . . .. vWho should read this publication . . . . . .. vPublications . . . . . . . . . . . . .. v

Chapter 1. Introduction to DataProtection for Microsoft SQL Servermessages . . . . . . . . . . . . .. 1Data Protection for Microsoft SQL Server messagesformat . . . . . . . . . . . . . . .. 1

Chapter 2. Data Protection for MicrosoftSQL Server messages . . . . . . .. 3

Appendix. Accessibility features for theTivoli Storage Manager product family . 29

Notices . . . . . . . . . . . . .. 31

Glossary . . . . . . . . . . . . .. 35

© Copyright IBM Corp. 1995, 2015 iii

iv IBM Tivoli Storage Manager for Databases: Data Protection for Microsoft SQL Server Messages

About this publication

IBM® Tivoli® Storage Manager for Databases, Data Protection for Microsoft SQLServer is an enterprise-wide storage management application for the network. Itbacks up and restores Microsoft SQL Server databases to Tivoli Storage Managerstorage or local shadow volumes.

This publication contains explanations and suggested actions for messages that areissued by IBM Tivoli Storage Manager for Databases, Data Protection for MicrosoftSQL Server.

Who should read this publicationThe target audience for this publication is system administrators who use IBMTivoli Storage Manager for Databases, Data Protection for Microsoft SQL Server. Inthis publication, it is assumed that you have a working knowledge of TivoliStorage Manager for Databases, Data Protection for Microsoft SQL Server.

PublicationsThe Tivoli Storage Manager product family includes IBM Tivoli StorageFlashCopy® Manager, IBM Tivoli Storage Manager for Space Management, IBMTivoli Storage Manager for Databases, and several other storage managementproducts from IBM.

To view IBM product documentation, see http://www.ibm.com/support/knowledgecenter.

© Copyright IBM Corp. 1995, 2015 v

http://www.ibm.com/support/knowledgecenter

http://www.ibm.com/support/knowledgecenter

vi IBM Tivoli Storage Manager for Databases: Data Protection for Microsoft SQL Server Messages

Chapter 1. Introduction to Data Protection for Microsoft SQLServer messages

Messages with prefix ACO are issued by IBM Tivoli Storage Manager forDatabases, Data Protection for Microsoft SQL Server. Data Protection for MicrosoftSQL Server interacts with the IBM Tivoli Storage Manager backup-archive clients.When Data Protection for Microsoft SQL Server runs, you might see messages frombackup-archive clients. Backup-archive clients messages have prefix ANS or prefixFMV, depending on which licenses you installed.

For information about ANS messages, see ANS 0000-9999 messages(http://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.3/client.msgs/r_client_messages.html).

For information about FMV messages, see FMV messages (http://www.ibm.com/support/knowledgecenter/SS36V9_4.1.3/fcm.msgs/fcm_fmv_messages.html).

Data Protection for Microsoft SQL Server messages formatIBM Tivoli Storage Manager for Databases, Data Protection for Microsoft SQLServer messages consist of the following elements:v A three-letter prefix.v A numeric message identifier.v A one-letter severity code, also called the message type.v Message text that is displayed on screen and written to message logs.v Explanation, System Action, and User Response texts. These texts elaborate on

the message text and are accessible only in documentation.

The image presents a typical Data Protection for Microsoft SQL Server message.

The callouts on the right of the image identify each element of the message.

© Copyright IBM Corp. 1995, 2015 1

http://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.3/client.msgs/r_client_messages.html



http://www.ibm.com/support/knowledgecenter/SS36V9_4.1.3/fcm.msgs/fcm_fmv_messages.html

http://www.ibm.com/support/knowledgecenter/SS36V9_4.1.3/fcm.msgs/fcm_fmv_messages.html

The passwords entered do not match. Pleaseenter them again.

ACO 0162 E

Message PrefixMessage NumberMessage Type*

Message Text

Explanation

System Action

User Response

Explanation: An incorrect password wasentered.

System Action: Processing stops.

User Response: Enter the passwordsagain.

I = InformationE = ErrorS = Severe ErrorW = Warning

*

The severity codes give an indication of the severity of the issue that generated themessage. The severity codes and their meanings are as follows:

Code Severity MeaningS Severe The product or a product function cannot continue. User

response is required.E Error An error is encountered during processing. Processing might

stop. User response might be required.W Warning Processing continues, but problems might occur later as a result

of the warning.I Information Processing continues. User response is not necessary.

Message variables in the message text are in italics.

2 IBM Tivoli Storage Manager for Databases: Data Protection for Microsoft SQL Server Messages

Chapter 2. Data Protection for Microsoft SQL Servermessages

IBM Tivoli Storage Manager for Databases, Data Protection for Microsoft SQLServer V7.1.3 messages are listed in ascending numerical order. The completemessage is documented, including message ID, message text, explanation, systemaction, and user response.

ACO0003S An internal processing error hasoccurred.

Explanation: An internal processing error hasoccurred.

System action: Processing ends.

User response: Retry the operation. If this errorpersists, contact your service representative.

ACO0004E An unknown error has been detected.

Explanation: An internal processing error hasoccurred that prevents the generation of a message fora return code.

System action: Processing continues.


ACO0005E Out of memory. Stop other processesand try the operation again.

Explanation: The machine has run out of memory.


User response: Close unnecessary processes and trythe operation again.

ACO0054E Read failure on license file (licensefile).

Explanation: An attempt was made to read from thelicense file. This attempt failed.


User response: Reinstall the product. This will ensurethat the correct license file is installed.

ACO0055E Write failure on license file (licensefile).

Explanation: An attempt to write to the license filefailed.


User response: Make sure enough space exists on theworkstation to write to the license file. If enough spaceexists, run the command again.

ACO0056E Data in the license file (licensefile) is notin a valid format.

Explanation: An attempt to read information from thelicense file failed.


User response: Install the product again.

ACO0057E The checksum in the license file(licensefile) does not match the licensestring text.

Explanation: An attempt was made to readinformation from the license file. The checksum wasnot valid so it appears that the license file is not at thecorrect level.


User response: Reinstall the product.

ACO0058E The 'Try and Buy' license has expired.

Explanation: This 'Try and Buy' license that wasdetected has expired.


User response: This product is no longer valid for use.A valid license must be obtained before running theproduct.

ACO0100E Incomplete command:

Explanation: This message displays the incompletecommand that was entered.


User response: Re-enter the complete command.

ACO0101E Invalid argument:

Explanation: This message displays the command thatwas entered, up to and including the invalid commandor option argument that was detected.


User response: Re-enter the command specifying avalid argument for the command or option.


ACO0102E Invalid command:

Explanation: This message displays the invalidcommand that was entered.


User response: Re-enter a valid command.

ACO0103E Invalid option for the specifiedcommand:

Explanation: This message displays the command thatwas entered, up to and including the option that wasdetected as invalid for the command.


User response: Re-enter the command specifying validcommand options.

ACO0104E Invalid option:

Explanation: This message displays the command thatwas entered, up to and including the invalid optionthat was detected.



ACO0105E Missing argument:

Explanation: This message displays the command thatwas entered, up to and including the command oroption whose required argument is missing.


User response: Re-enter the command specifying avalid argument for the command or option.

ACO0133W Could not locate installation directory.Attempting to continue...

Explanation: An attempt was made to read theregistry to determine where the Tivoli Data Protectionapplication client was installed. This attempt failed.

System action: Processing will continue with thecommand entered.

User response: There should be other messages alongwith this one. Refer to the other messages to determinethe problem. If the problem can not be determined, itmay be necessary to reinstall the application clientcode. This will ensure that the registry entries are setup correctly.

ACO0134W Could not locate log directory.Processing will continue...

Explanation: An attempt was made to read theregistry to determine where the Tivoli Data Protectionapplication client log is located. This attempt failed.

System action: Processing will continue with thecommand entered.

User response: There should be other messages alongwith this one. Refer to the other messages to determinethe problem. If the problem can not be determined, itmay be necessary to reinstall the application clientcode. This will ensure that the registry entries are setup correctly.

ACO0150I Operation canceled by user.

Explanation: The user has requested that the DataProtection for Microsoft SQL Server application clientend by entering ctrl-C.


User response: None

ACO0151E Errors occurred while processing therequest.

Explanation: Attempting to process the requestentered, an error occurred.


User response: Attempt to determine the source of theerrors from viewing the log file. Correct the problemsand try running the command again.

ACO0152I Performance stats: seconds seconds spentin apicall API calls

Explanation: The indicated number of seconds werespent making API calls for the indicated system.


User response: None

ACO0153I Performance stats: seconds seconds spentin function

Explanation: The indicated number of seconds werespent the named function.


User response: None

ACO0154E The Data Protection for Microsoft SQLServer application client cannot workwith the version of the Tivoli StorageManager API you have installed.Please install version version.release.levelor greater.

ACO0102E • ACO0154E


Explanation: The version of the Tivoli StorageManager API currently installed on the system is olderthan the version used to build the Data Protection forMicrosoft SQL Server application client.


User response: Install a version of the Tivoli StorageManager API at or later than the indicated level. Acopy is distributed with the Data Protection forMicrosoft SQL Server application client.

ACO0155E The Data Protection for Microsoft SQLServer application client cannot workwith the release of Tivoli StorageManager API you have installed.Please install release version.release.l evelor greater.

Explanation: The release of the Tivoli StorageManager API currently installed on the system is olderthan the release used to build the Data Protection forMicrosoft SQL Server application client.


User response: Install a release of the Tivoli StorageManager API at or later than the indicated level. Acopy is distributed with the Data Protection forMicrosoft SQL Server application client.

ACO0156E Could not load the Tivoli StorageManager API.

Explanation: The Tivoli Storage Manager API couldnot be loaded.


User response: Ensure the Tivoli Storage Manager APIis correctly installed. Run the Data Protection forMicrosoft SQL Server application client with the/TRACEFLAGS=API /TRACEFILE=filename optionsand view the tracefile to determine why it could not beloaded. Another possible cause is that the TSMAPI.DLLdoes not exist in the system directory. Re-install theTivoli Storage Manager API, if this is the case.

ACO0160E An authentication error occurred withyour stored Tivoli Storage Managerpassword.

Explanation: You were unable to log on to the TivoliStorage Manager server due an authentication error.

System action: Processing stops.

User response: The stored Tivoli Storage Managerpassword may have become corrupted. Contact yourTivoli Storage Manager server administrator.

ACO0161E Authentication error. The passwordentered is not valid.You are not logged on to the TivoliStorage Manager server.

Explanation: An incorrect password was entered.


User response: Enter the correct Tivoli StorageManager password and try again.

ACO0162E The passwords entered do not match.Please enter them again.

Explanation: An incorrect password was entered.


User response: Enter the passwords again.

ACO0163E The directory path needs to befully-qualified.

Explanation: The /intopath option was specifiedwithout a fully-qualified path.


User response: Enter the command again and specifya fully-qualified path in the /intopath option.

ACO0200E File (filename) could not be opened forreading.

Explanation: An attempt was made to open a file forreading. This attempt failed.


User response: None

ACO0201E File (filename) could not be opened forwriting.

Explanation: An attempt was made to open a file forwriting. This attempt failed.


User response: None

ACO0202E Read failure on file (filename).

Explanation: An attempt was made to read from afile. This attempt failed.


User response: None


Chapter 2. Data Protection for Microsoft SQL Server messages 5

ACO0203E Write failure on file (filename).

Explanation: An attempt was made to write to a file.This attempt failed.


User response: None

ACO0204E File (filename) could not be closed.

Explanation: An attempt was made to close a file.This attempt failed.


User response: None

ACO0205E File (filename) statistics could not beobtained.

Explanation: An attempt was made to obtain filestatistics. This attempt failed.


User response: None

ACO0206E Directory (directory) could not be created.

Explanation: An attempt was made to create adirectory. This attempt failed.


User response: None

ACO0207E Directory path (directorypath) is too long.

Explanation: An attempt was made to use a directorypath that was too long. This attempt failed.


User response: None

ACO0208E There is not enough disk space for theoperation attempted.

Explanation: An attempted operation required moredisk space than was available. The attempt failed.


User response: None

ACO0209E The rename of file (filename1) to(filename2) failed.

Explanation: An attempt was made to rename a file.This attempt failed.


User response: None

ACO0210E The Tivoli Storage Manager high levelqualifier is too long.

Explanation: An attempt was made to use a TivoliStorage Manager high level qualifier that was too long.This attempt failed.


User response: None

ACO0211E The Tivoli Storage Manager low levelqualifier is too long.

Explanation: An attempt was made to use a TivoliStorage Manager low level qualifier that was too long.This attempt failed.


User response: None

ACO0212E The Tivoli Storage Manager filespacename is too long.

Explanation: An attempt was made to use a TivoliStorage Manager filespace name that was too long. Thisattempt failed.


User response: None

ACO0213E The maximum number of objectsallowed per Tivoli Storage Managertransaction is too small.

Explanation: In order to maintain backup dataintegrity, multiple backup objects are sent to the TivoliStorage Manager server in a single transaction. TheTivoli Storage Manager server has indicated that themaximum number of objects allowed per transaction isless than the minimum required by the Data Protectionfor Microsoft SQL Server application client.


User response: Increase the maximum number ofobjects allowed per transaction on the Tivoli StorageManager server and retry the operation.

ACO0214E The backup object's management classbackup copy group does not exist.

Explanation: The Tivoli Storage Manager server hasindicated that the backup object's management classbackup copy group does not exist.


User response: Contact your Tivoli Storage Managerserver administrator.



ACO0215E All backup objects do not have the samemanagement class backup copydestination.

Explanation: In order to maintain backup dataintegrity, multiple backup objects are sent to the TivoliStorage Manager server within a single transaction. Allbackup objects within a single transaction are requiredto have the same management class backup copydestinations.


User response: Contact your Tivoli Storage Managerserver administrator.

ACO0216E Unable to obtain space information forvolume (volumename).

Explanation: An attempt was made to obtain spaceinformation for a volume. This attempt failed.


User response: None

ACO0217E The Tivoli Storage Manager filespacename is invalid.

Explanation: The filespace name or directorydelimeter is invalid.


User response: Check that the filespace name length,characters, and directory delimeters are valid.

ACO0218E The Tivoli Storage Manager high levelqualifier is invalid.

Explanation: The high level qualifier name ordirectory delimeter is invalid.


User response: Check that the high level qualifiername length, characters, and directory delimeters arevalid.

ACO0219E The Tivoli Storage Manager low levelqualifier is invalid.

Explanation: The low level qualifier name or directorydelimeter is invalid.


User response: Check that the low level qualifiername length, characters, and directory delimeters arevalid.

ACO0256E The password in your Tivoli StorageManager options file has expired.Please change your password on theTivoli Storage Manager server usingthe 'change password' command andthen either changeor remove the password value in youroptions file.

Explanation: Your Tivoli Storage Manager passwordhas expired. You need to change your password.


User response: Obtain a new password for your TivoliStorage Manager server; node using the changepassword command or by asking your Tivoli StorageManager Administrator to change your password.

ACO0257E Your password has expired.

Explanation: Your Tivoli Storage Manager passwordhas expired. A new password needs to be obtained.


User response: Obtain a new password for your TivoliStorage Manager node using the change passwordcommand or by asking your Tivoli Storage ManagerAdministrator to change your password.

ACO0258E You did not enter a valid password.Processing ends.

Explanation: The password that was entered was nota valid password.


User response: Re-enter the command specifying avalid password.

ACO0259E The password you entered forverification does not match thepassword you entered for your newpassword. Your passwordwill not be changed.

Explanation: The password you entered forverification of your new password does not match thenew password that was entered.


User response: Try again to change your passwordbeing sure to enter the same password for the newpassword and for the verification password.

ACO0260I Password successfully changed.

Explanation: The change password commandcompleted successfully


ACO0215E • ACO0260I


User response: None

ACO0261I There are no backups for the servernamed servername.

Explanation: There are no backups on the TivoliStorage Manager server for the specified server name.


User response: None

ACO0262E Errors occurred while processing theVSS operation. Examine the WindowsEvent Logs and DSMERROR.LOG foradditional details.

Explanation: While attempting to process a VSSoperation, an unexpected error occurred.


User response: Attempt to determine the source of theerror by examining the Data Protection for SQL log file,the TSM Client error log file (DSMERROR.LOG), theWindows Application Event Log, the Windows SystemEvent Log, and the VSS provider log file, if applicable.Additional instructions for Windows VSS operationsare located in the TSM Problem Determination Guide.Correct the problem and retry the operation. If thiserror persists, contact your service representative.

ACO0267E The verify password entered does notmatch the new password entered.

Explanation: The verify password does not match thenew password.


User response: Retry the command with a matchingverify password.

ACO0292E An unknown error has been detected. rc= rc

Explanation: An error occured without an errormessage. The return code is displayed.



ACO0300E Invalid restore type.

Explanation: The type of restore requested is invalid.


User response: Re-enter the command specifying avalid restore type.

ACO0301E Invalid backup type.

Explanation: The type of backup requested is invalid.


User response: Re-enter the command specifying avalid backup type.

ACO0351E Invalid trace keyword - 'keyword'

Explanation: A TRACEFLAG option in the userconfiguration file or on the command line is incorrect.

System action: Client program did not initialize ortracing was not enabled in the applet.

User response: Correct the value.

ACO0368E Invalid trace file name (name too long).

Explanation: A TRACEFILE option in the preferencesfiles used a file name that is too long.

System action: Client program did not initialize.

User response: Change the file name used as theTRACEFILE so that it is equal to or less than 255characters in length.

ACO0384E Symbolic link 'linkname' to 'target' wassuccessfully deleted.

Explanation: Log 'linkname' cannot be a symbolic link.

System action: The symbolic link 'linkname' is deleted,the log is recreated, and processing stops.

User response: Check the location of the new file. Tospecify the location of log files, refer to the user'smanual for the 'errorlogname' option, the'schedlogname' option, and the 'DSM_LOG'environmental variable.

ACO0385E Unable to delete symbolic link 'link'.

Explanation: Log 'linkname' cannot be a symbolic link.


User response: Delete the symbolic link 'linkname'.

ACO0487E Specifying the error log 'link' as asymbolic link is not allowed.

Explanation: Error log 'linkname' cannot be a symboliclink.

System action: The symbolic link 'linkname' is deleted,the error log is recreated, and processing stops.

User response: Check the location of the new errorlog. To specify the location of the error logs, refer to theuser's manual for the 'errorlogname' option and'DSM_LOG' environmental variable.

ACO0261I • ACO0487E


ACO0488E Initialization functions cannot open theerror log: log-name. errno = errno-value,

Explanation: The file log-name could not be openedduring initialization. The system set the error codeerrno-value. If the reason given is "access denied," thecurrent user does not have permission to write to thelog in the directory specified. It is also possible that nospace is available at the given log location.

System action: Processing terminates.

User response: Set the DSM_LOG (or DSMI_LOG)environment variable to a directory into which thecurrent user can write. You may also use theERRORLOGNAME option to specify a file to which thecurrent has write permission.

ACO0495E Failure writing to a Tivoli StorageManager log or log-related file: file-name,errno = errno-value, reason

Explanation: A failure was encountered when writingto one of the log files or a related file named file-name.The system set the error code errno-value. reason is thesystem explanation of that error code. Among otherthings, it is possible that no space is available at thegiven log location.

System action: Processing terminates.

User response: Set the DSM_LOG (or DSMI_LOG)environment variable to a directory with adequatespace to write the log data.

ACO0496I DP is converting the log-file fromcontinuous (pruning) mode to wrappingmode. This process may take severalminutes.

Explanation: The log-file was previously in continouosmode where the only size control was through the useof ERRORLOGRETENTION orSCHEDLOGRETENTION option. This is the firstoccasion where ERRORLOGMAX or SCHEDLOGMAXis specified for this log, so its format must be changedand old data saved.

System action: Transition processing continues.

User response: None.

ACO0497I DP is converting the log-file fromwrapping mode to continuous (pruning)mode. This process may take severalminutes.

Explanation: The log-file was previously in wrappingmode where the size control was through the use of theERRORLOGMAX or SCHEDLOGMAX option. This isthe first occasion where ERRORLOGMAX orSCHEDLOGMAX is not specified for this log, so itsformat must be changed and old data saved.



ACO0498I count log records processed.

Explanation: This is just a progress report to let youknow the process is still ongoing.



ACO0501E Invalid Proxy Configuration Detected:Target Node 'targetnode' is not listed as avalid node to proxy to for Node Name'nodename'.

Explanation: The proxy node configuration on theTSM Server is not correct to support this VSSoperation.

System action: The VSS operation stops.

User response: Contact the TSM Server administratorto have the correct TSM Server GRANT PROXYcommands issued to enable proxy authority for thenodes. If the error persists, contact your servicerepresentative.

ACO0515E Invalid DSMAGENT Nodeconfiguration found for node'dsmagentnode'.

Explanation: The DSMAGENT Node specified is notconfigured properly.


User response: Verify that the DSMAGENT Nodespecified is correct and that the Client AcceptorDaemon (CAD) is running for the DSMAGENT Node.If the error persists, contact your service representative.

ACO0516I The Windows console event handlerreceived a 'event' console event.

Explanation: A console event was received by one ofthe Data Protection for Microsoft SQL Server processesor programs. The following events can be recevied:

v Ctrl-C - This indicates either the user entered thectrl-c sequence or that one of the Windows serviceswas stopped.

System action: None.


ACO0517I An unexpected error was encountered.DP function name : function-nameDP function : function-descDP return code : TSM-rcDP file : file-name (line-number)



Explanation: None.


User response: Contact the DP administrator with theinformation provided in this message.

ACO0518E Backups selected for restore must havethe same backup location (TSM orLOCAL).

Explanation: A VSS restore operation was submittedthat specified multiple backup objects. The backupobjects chosen had different backup locations. This isnot allowed. All backup objects submitted in the sameVSS restore operation must have the same backuplocation, either TSM or LOCAL, but not both.

System action: The VSS restore operation stops.

User response: Retry the VSS restore operationspecifying one backup object at a time.

ACO0519E The VSS operation failed with rc =returncode.

Explanation: There was a failure when TSMperformed the VSS operation.


User response: Verify that the TSM Client AcceptorDaemon (CAD) is installed, configured, and runningproperly on the machine. Retry the operation. If theerror persists, contact your service representative.

ACO0520E Failed to connect to Local DSMAGENTNode 'localdsmagentnode' at address:port'address:portnumber'. Verify that the TSMClient Acceptor Daemon (CAD) isinstalled, configured, and runningproperly.

Explanation: An attempt was made to connect to theTSM Client Acceptor Daemon (CAD) running on thelocal machine. A communication error occurred whenthis connection was attempted.

System action: The operation stops.

User response: In order to perform VSS operations,you must have a TSM Client Acceptor Daemon (CAD)and a TSM Remote Client Agent Service (DSMAGENT)installed and configured properly. In addition, the TSMClient Acceptor Daemon (CAD) must be running.Verify that the TSM Client Acceptor Daemon (CAD) isinstalled, configured, and running properly on the localmachine. If the error persists, contact your servicerepresentative.

ACO0521E Pruning functions cannot open one ofthe Tivoli Storage Manager prune files:log-name. errno = errno-value,

Explanation: The file "log-name" could not be openedduring pruning. The system set the error codeerrno-value. If the reason given is "access denied," thecurrent user does not have permission to write to thefile in the directory specified. It is also possible that nospace is available at the given file location or anotherTivoli Storager Manager process started by differentuser id is performing pruning at the same time.

System action: Pruning stops, processing continues.

User response: Set the DSM_LOG (or DSMI_LOG)environment variable to a directory into which thecurrent user can write.

ACO0522E DIAG:

Explanation: The message text is provided fordiagnostic purposes and is meant to provideinformation to IBM support in problem determination.



ACO0524S Error 'errtxt' (errno=errno) occurredtrying to write to audit log 'file-name'.The audit log function is disabled.

Explanation: There was an error encountered writingto the audit log (for example, there is not enough spaceon the disk).

System action: Audit logging is disabled for the restof the operation. The return code for the operation isset to 12 to indicate that the contents of the audit logare incomplete.

User response: If this is an out of space conditioneither free up space on the volume or try to write theaudit log to a volume with more space.

ACO0556E Invalid number of days:

Explanation:

System action: The Policy was not created.

User response: Specify a number in the range: range:0...9999 or NOLimit

ACO0571E The specified policy was not found:'policy'

Explanation:

System action:

User response: Please make sure that the specifiedpolicy exists.



ACO0572E The specified policy already exists:'policy'

Explanation:

System action: Policy was not created.

User response: Enter a different name for the policy.

ACO0573E The specified policy could not beupdated: 'policy'

Explanation: This is due to a problem in virtual serverdatabase.

System action:

User response: Make sure that FCM is configuredcorrectly.

ACO0574E The specified policy could not bedeleted: 'policy'


System action:


ACO0575E The specified policy could not becreated: 'policy'


System action:


ACO0576I There were no items found.

Explanation: The query completed successfully, but noresults were found.


User response: Change the specified search criteria.

ACO0581E Volume volume-name could not belocked.

Explanation: The system call to lock the volumefailed.

System action: Processing stopped.

User response: Please verify that no other applicationis accessing the volume. During restore of an image DPmust have exclusive use of the volume.

ACO0585E Unable to connect to the TSM ClientAcceptor Daemon (CAD).

Explanation: Possible causes of this message include:The TSM Client Acceptor Daemon (CAD) is notrunning.The VSSALTSTAGINGDIR option setting in the optionfile is not set to the same value as theVSSALTSTAGINGDIR option setting in the DataProtection for Microsoft SQL Server Remote ClientAgent Service (DSMAGENT) option file. They must beset to the same value for successful operations.


User response: Ensure that the TSM Client AcceptorDaemon (CAD) is running.Ensure that the VSSALTSTAGINGDIR option setting inthe option file is set to the same value as theVSSALTSTAGINGDIR option setting in the DataProtection for Microsoft SQL Server Remote ClientAgent Service (DSMAGENT) option file. Aftercorrecting the VSSALTSTAGINGDIR optioninconsistency, retry the operation.

ACO0588E The value for the BACKUPDESTinationoption is not allowed. Data Protectionfor Microsoft SQL Server is onlylicensed to run data protectionoperations to a Tivoli Storage Managerserver. It is not licensed to backup or torestore locally managed snapshots.

Explanation: The value for the configuration option isnot allowed. The only allowed value is TSM.Data Protection for Microsoft SQL Server is onlylicensed to run data protection operations to a TivoliStorage Manager server. It is not licensed to backup orto restore locally managed snapshots.


User response: Set the backup destination to TSM.In order to create and restore local VSS backups it isrequired to use and install a fully-featured valid licenseor to purchase an upgrade, and install Tivoli StorageFlashCopy Manager.

ACO0589E You are not allowed to setREMOTEDSMAGentnode option. DataProtection for Microsoft SQL Server isnot licensed to perform offloaded VSSbackups.

Explanation: The REMOTEDSMAGentnode option isused to perform offloaded VSS backups.


User response: In order to perform offloaded VSSbackups install a valid fully-featured license.



ACO0590E A Data Protection communication errorwith the Tivoli Storage Manager serverhas occurred.

Explanation: Communications with the Tivoli DataProtection server has been lost.


User response: Correct the TCP/IP communicationserror with the Tivoli Storage Manager server and retrythe operation.

ACO0591I Data Protection communications withthe Tivoli Storage Manager server hasbeen successfully recovered.

Explanation: Communications with the Tivoli DataProtection server has been successfully recovered.


User response: Continue with normal operations.

ACO0592E The Data Protection TCP/IP sessionwith the Tivoli Storage Manager serverwas canceled.

Explanation: The Data Protection TCP/IP session withthe Tivoli Storage Manager server was cancelled.


User response: Correct the reason the Tivoli StorageManager server administrator cancelled the session andretry the operation.

ACO0593E Data Protection for Microsoft SQLServer is not licensed to performoffloaded VSS backups.

Explanation: Currently installed license does not allowto perform offloaded VSS backups.In order to use this feature it is necessary to install avalid fully-featured license.


User response: In order to perform offloaded VSSbackups install a valid fully-featured license.

ACO0594E You cannot perform offloaded VSSbackups in TSM Server independentenvironment.

Explanation: OFFLOAD option is not available inTSM Server independent environment.


User response: In order to perform offloaded VSSbackups you have to configure Tivoli StorageFlashCopy Manager to manage snapshot backups usinga Tivoli Storage Manager server. To do this you can useTivoli Storage Manager configuration wizard.

ACO0595E The options file 'optfile' does not exist. Itis required for proper operation.

Explanation: The specified TSM API options file couldnot be found. It is required in order to complete thecommand.


User response: Make sure to complete Tivoli StorageManager configuration and try the operation again.

ACO0598E The application cannot run in safemode.

Explanation: The application requires either Servicesor Drivers that are not available when running in safemode.

System action: The application processing stops.

User response: Restart the system using the normalstartup. When the system is started, run theapplication.

ACO0599E The application cannot establish aremote powershell connection.

Explanation: The application attempted to establish aremote powershell connection. The operation failed.

System action: The application processing stops.

User response: Verify you are using the correctcredentials. For more information, see the Microsoftabout_Remote_Troubleshooting Help topic.

ACO0602E While attempting to communicate withthe remote client, a version checkreveals that the versions do not match.

Explanation: During initialization between the localclient and the remote client, version checking revealsthat the versions do not match. This is usually theresult of an upgrade of one client module withoutupgrading other client modules that are part of productsolution.

System action: The calling procedure returns andcontrol is passed back the user.

User response: Check the versions of all TSM Clientproducts that communicate with each other and ensurethat they are all at the same version, release, and level.

ACO3000I Data Protection for SQL: Starting backuptype backup of database database namefrom server server name.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whena backup is started.

System action: None



User response: None Centrally logged

ACO3001I Data Protection for SQL: backup typebackup of database database name fromserver server name completedsuccessfully.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whena database backup completes successfully.

System action: None


ACO3002E Data Protection for SQL: backup typebackup of database database name fromserver server name failed, rc = return code.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whena database restore fails.

System action: None


ACO3003I Data Protection for SQL: Starting restoretype restore of backup object object nameto database database name on server servername.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whena restore is started.

System action: None


ACO3004I Data Protection for SQL: restore typerestore of backup object object name todatabase database name on server servername completed successfully.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whena database restore completes successfully.

System action: None


ACO3005E Data Protection for SQL: restore typerestore of backup object object name todatabase database name on server servername failed.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whena database restore fails.

System action: None


ACO3006I Data Protection for SQL: Startingbackup for server server name.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity logindicating the start of a backup.

System action: None


ACO3007I Data Protection for SQL: Backup ofserver servername is complete.Total SQL backups selected: numberselectedTotal SQL backups attempted: numberattemptedTotal SQL backups completed: numbercompletedTotal SQL backups excluded: numberexcludedThroughput rate: rate Kb/SecTotal bytes transferred: bytesElapsed processing time: time Secs

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity logindicating the end of a backup request.

System action: None


ACO3008I Data Protection for SQL: Backup ofserver servername is complete.Total SQL backups selected: numberselectedTotal SQL backups attempted: numberattemptedTotal SQL backups completed: numbercompletedTotal SQL backups excluded: numberexcludedTotal SQL backups inactivated: numberinactivatedThroughput rate: rate Kb/SecTotal bytes transferred: bytesElapsed processing time: time Secs


System action: None


ACO3009I Data Protection for SQL: backup typebackup of database database name fromserver server name canceled by user.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log

ACO3001I • ACO3009I


indicating that a backup request was canceled by theuser.

System action: None


ACO3010I Data Protection for SQL: Starting restorefor server servername.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity logindicating the start of a restore.

System action: None


ACO3011I Data Protection for SQL: Restore fromserver server name to server server name iscomplete.Total database backups inspected:number inspectedTotal database backups requested forrestore: number requestedTotal database backups restored: numberrestoredTotal database skipped: number skippedThroughput rate: rate Kb/SecTotal bytes transferred: bytesElapsed processing time: time Secs

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity logindicating the end of a restore.

System action: None


ACO3012I Data Protection for SQL: restore typerestore of backup object object name todatabase database name from server servername canceled by user.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity logindicating that a backup request was canceled by theuser.

System action: None


ACO3013I Data Protection for SQL: StartingInactivate processing for backup objectsfrom server servername

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whenan inactivate process begins.

System action: None


ACO3014I Data Protection for SQL: Inactivateprocessing completeTotal database backups inspected:number inspectedTotal database backups requested forinactivation: number requestedTotal database backups inactivated:number inactivatedTotal database skipped: number skippedElapsed processing time: time Secs

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log toindicate the end of an inactivate command.

System action: None

User response: None

ACO3015I Data Protection for SQL: Inactivatingbackup type backup backup object.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whenan inactivation of a backup object is started.

System action: None


ACO3016I Data Protection for SQL: Databasedatabase name from server server name isexcluded from backup type backupbecause it has a Simple Recovery modelor it is a system master database.

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity log whena Simple Recovery model database or a system masterdatabase is automatically excluded from a DataProtection for SQL backup.

System action: None


ACO3528E Data Protection for Microsoft SQLServer is only licensed to run dataprotection operations to a Tivoli StorageManager server. It is not licensed tobackup or to restore using locallymanaged snapshots.

Explanation: Currently installed license allows tocreate and restore only TSM VSS backups. In order tocreate backups and to restore local VSS backups, DataProtection for SQL requires that a valid fully-featuredlicense is installed.


User response:In order to create and restore local VSS backups it is

ACO3010I • ACO3528E


required to purchase and install a fully-featured validlicense.

ACO3532E The restore destination directory pathneeds to be fully-qualified.

Explanation: The /relocatedir option was specifiedwithout a fully-qualified path.


User response: Enter the command again and specifya fully-qualified path in the /relocatedir option.

ACO5050I A new configuration file was created.

Explanation: The file specified in the /configfileparameter does not exist. A new file was created.



ACO5051I The configuration file cannot be found,using default settings.

Explanation: The file specififed in the /configfileparameter cannot be found.


User response: Ensure the correct file name isspecified.

ACO5052E An error occurred trying to set therequested configuration option.

Explanation: An error occurred while writing to theconfiguration file.


User response: View any other messages that weredisplayed. After reviewing the messages andperforming necessary actions, run the command again.

ACO5053E The value for the option option is notvalid.See the TDPSQLC Help Set output orthe User's Guide for valid Set commandparameters.

Explanation: The configuration option being set is notvalid.


User response: Run "TDPSQLC Help Set" or refer tothe User's Guide for valid Set command parameters.

ACO5054I The configuration option was setsuccessfully.

Explanation: The configuration option specified on theSet command was set successfully.


User response: None

ACO5056I The logfile log file could not be pruned.Processing will continue.

Explanation: An attempt to prune the log wasunsuccessful.


User response: The log file may not exist. If the logfile exists, view the log for indications of possibleproblems.

ACO5057I The logfile log file was prunedsuccessfully.

Explanation: The log file mentioned prunedsuccessfully.



ACO5058W The logfile name is greater than themaximum allowed. Processing willcontinue using a logfile name of logfilein the current directory.

Explanation: The logfile name entered was not fullyqualified. When the fully qualified log file name wascreated, it was longer than the possible length of a logfile.

System action: Processing continues by creating andusing a log file in the current directory.

User response: Consider updating the log file nameusing a fully qualified path.

ACO5059W The logfile log file cannot be opened forwriting. There will be no logging ofevents.

Explanation: The log mentioned could not be openedfor appends. Therefore, no logging is performed.

System action: Processing continues without logging.

User response: Determine why the log file could notbe opened. The log file may refer to a non-existentdrive or partition, or the log file is marked read-only.

ACO3532E • ACO5059W


ACO5060E A Tivoli Storage Manager API error hasoccurred.

Explanation: A Tivoli Storage Manager API error hasoccurred.


User response: Retry the operation. If the errorpersists, contact your service representative.

ACO5061E A Microsoft SQL API error has occurred.

Explanation: A Microsoft SQL API error occurred.


User response: Retry the operation. If the errorpersists, contact your service representative.

ACO5063I The logfile_name log file did not needpruning.

Explanation: The log file specified did not need to bepruned.


User response: The log file will automatically bepruned at a later date. If the log file is currently toolarge, decrease the number of days the log entries areretained.

ACO5064W The logfile_name log file could not beopened for writing. The log was notpruned and there will be no logging ofevents.

Explanation: The log mentioned could not be openedfor appends. Therefore, no logging or pruning isperformed.

System action: Processing continues without loggingand without pruning.

User response: Determine why the log file could notbe opened. The log file may refer to a non-existentdrive or partition, or the log file is marked read-only.

ACO5065E The value specified for the /SQLUSeroption does not match the registry entry.

Explanation: A Backup, Restore or Query Sqlcommand was issued with both the/SQLAUTHentication=SQLUserid and the /SQLUSeroption specified. An attempt was made to obtain thesqlpassword value from the registry but the user ID inthe registry does not match the user ID specified withthe /sqluser option.


User response: Issue the command and either specifythe /sqluser value which matches the registry entry orspecify the desired values for both the /sqluser and

/sqlpassword options on the command.

ACO5091E PASSWORDACCESS is Generate. Eitherthe stored passwordis incorrect or there is no storedpassword. If you donot have a stored password, use the-TSMPassword=xxx optionto set and store your password.

Explanation: The PASSWORDACCESS option is set togenerate in the client options file. However, nopassword is stored. An initial password needs to bestored.


User response: Invoke the command again using the-TSMPassword option. Any subsequent commandsshould now complete without specifying a password.

ACO5097I Data Protection for SQL is notconfigured for VSS operations.

Explanation: Data Protection for SQL has not beenconfigured to perform VSS operations.


User response: In order to perform VSS operations,there must be a valid Tivoli Storage Manager AdvancedCopy Services license installed and the Data Protectionfor SQL LOCALDSMAGENTNODE preference must beset correctly. Refer to the Data Protection for SQL User'sGuide for details on configuring the client for VSSoperations.

ACO5098E Error obtaining VSS information fromLocal DSMAgent Node:'localdsmagentnode'.

Explanation: Data Protection for SQL attempted toobtain VSS information through the specifiedLOCALDSMAGENTNODE but failed. The errormessage encountered is also displayed.

System action: VSS information is not displayed.

User response: Refer to the error message displayedalong with this message.

ACO5124E Invalid command. Data Protection forSQL only supports VSS backup type ofFULL.

Explanation: An invalid backup type was specified onthe VSS backup request. Data Protection for SQLsupports backup types of FULL when using the VSSbackup method.

System action: The backup operation is canceled.

User response: Retry the backup operation specifyinga supported VSS backup type.



ACO5125E Invalid command. Data Protection forSQL does not support OFFLOAD withthe Legacy backup method.

Explanation: The OFFLOAD option was specifiedwhen using the Legacy backup method. DataProtection for SQL does not support offload with theLegacy backup method. Data Protection for SQLsupports offload with the VSS backup method only.


User response: Retry the backup operation withoutspecifying the offload option or by specifying the VSSbackup method.

ACO5126E Invalid command. Data Protection forSQL only supports Legacy backups witha backup destination of TSM.

Explanation: An invalid backup destination wasspecified with the Legacy backup method. DataProtection for SQL only supports a backup destinationof TSM when using the Legacy backup method.


User response: Retry the backup operation specifyinga backup destination of TSM.

ACO5127E Invalid command. Data Protection forSQL does not support OFFLOAD withthe combination specified for backupdestination and version of Windows.

Explanation: The OFFLOAD option was specifiedwith an unsupported backup destination. DataProtection for SQL only supports offload with a backupdestination of TSM or if running on a Windows System2008 or later, backup destination TSM or BOTH.


User response: Retry the VSS offloaded backupoperation specifying a backup destination of TSM.

ACO5128E The VSS operation failed with rc =returncode.

Explanation: There was a failure when Data Protectionfor SQL performed the VSS operation.


User response: Verify that the Client AcceptorDaemon (CAD) is installed, configured, and runningproperly on the machine. Retry the operation. If theerror persists, contact your service representative.

ACO5129E Data Protection for SQL is unable to runVSS operations.A valid VSS license file could not belocated.

Explanation: In order to perform VSS operations, it isrequired to purchase and install a valid license.


User response: Verify that the prerequisites identifiedabove are met and retry the operation.

ACO5170E Missing, blank, or invalid LocalDSMAGENT Node Name is notallowed.

Explanation: In order to run VSS operations, DataProtection for SQL verifies that the Local DSMAGENTNode Name is specified and valid. This error indicatesthat the Local DSMAGENT Node Name is missing,blank, or invalid.


User response: Set the Local DSMAGENT NodeName to a valid value and retry the operation.

ACO5171E Invalid command. Data Protection forSQL only supports restoring VSSbackup types of FULL and COPY.

Explanation: An invalid backup type was specified onthe VSS restore request. Data Protection for SQLsupports restoring backups of type FULL and COPY.

System action: The restore operation is canceled.

User response: Retry the restore operation specifyinga supported VSS backup type.

ACO5172E Invalid command. Data Protection forSQL VSS restore does not supportRESTOREDATE and RESTORETIMEoptions.

Explanation: An invalid option was specified on theVSS restore request. Data Protection for SQLRESTOREDATE and RESTORETIME options are notsupported for VSS restore.


User response: Retry the restore operation withoutspecifying RESTOREDATE and RESTORETIME options.

ACO5177E Invalid DSMAGENT Nodeconfiguration found for node'dsmagentnode'.

Explanation: The DSMAGENT Node specified is notconfigured properly.




User response: Verify that the DSMAGENT Nodespecified is correct and that the Client AcceptorDaemon (CAD) is running for the DSMAGENT Node.If the error persists, contact your service representative.

ACO5188E BOTH may not be specified for/BACKUPDESTINATION, only TSM orLOCAL are valid.

Explanation: The restore command only allowsspecifying backup destinations of TSM or LOCAL foridentifying database(s) to restore.


User response: Retry the restore operation specifyingTSM or LOCAL with /BACKUPDESTINATIONparameters.

ACO5195I Data Protection for SQL: Backup ofserver servername enhanced statistics.Total SQL backups deduplicated: numberdeduplicatedThroughput rate: rate Kb/SecTotal bytes inspected: bytes inspectedTotal bytes transferred: bytesTotal LanFree bytes transferred: lanfreebytesTotal bytes before deduplication:prededup bytesTotal bytes after deduplication: postdedupbytesData compressed by: compression ratio%%Deduplication reduction: deduplicationratio%%Total data reduction ratio: reductionratio%%Elapsed processing time: time Secs

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity logdisplaying additional statistics at the end of a backuprequest.

System action: None


ACO5196I Data Protection for SQL: Backup ofserver servername is complete.Total SQL backups selected: numberselectedTotal SQL backups attempted: numberattemptedTotal SQL backups completed: numbercompletedTotal SQL backups excluded: numberexcludedTotal SQL backups deduplicated: numberdeduplicatedThroughput rate: rate Kb/SecTotal bytes inspected: bytes inspected

Total bytes transferred: bytesTotal LanFree bytes transferred: lanfreebytesTotal bytes before deduplication:prededup bytesTotal bytes after deduplication: postdedupbytesData compressed by: compression ratio%%Deduplication reduction: deduplicationratio%%Total data reduction ratio: reductionratio%%Elapsed processing time: time Secs


System action: None


ACO5197I Data Protection for SQL: Restore fromserver server name to server server name iscomplete.Total database backups inspected:number inspectedTotal database backups requested forrestore: number requestedTotal database backups restored: numberrestoredTotal database skipped: number skippedThroughput rate: rate Kb/SecTotal bytes transferred: bytesTotal LanFree bytes transferred: lanfreebytesElapsed processing time: time Secs

Explanation: This is an informational message writtento the Tivoli Storage Manager Server activity logindicating the end of a restore.

System action: None


ACO5198W WARNING: The LOG backup of the'database' database failed, however, thelog may have been truncated. Youshould perform a FULL backup of thedatabase.

Explanation: The LOG backup of the database failed,however, the log may have been truncated. You shouldperform a FULL backup of the database.


User response: You should perform a FULL backup ofthe database.



ACO5204E None of the specified databases exist, orare available for backup.

Explanation: A request was made to backup databaseswhich do not exist, or are not available.


User response: Ensure that all of the databases existand are available, and restart the backup.

ACO5205E The command is not valid. DataProtection for SQL supports restoringthe VMVSS FULL backup type.

Explanation: When the VMVSS restore request isentered, an invalid backup type is specified. The FULLbackup type is supported with Data Protection for SQLrestore backups.


User response: Start the restore operation after youspecify a supported VMVSS backup type.

ACO5247S File 'file-name' could not be found, or itcannot be read.

Explanation: Common reasons for this error include:

v The default options file does not exist.

v The DSM_CONFIG (or DSMI_CONFIG if you areusing the Data Protection for Microsoft SQL ServerAPI) environment variable specifies an options filethat does not exist.

v You specified the TSMOPTFILE or FCMOPTFILEoption when starting the Data Protection forMicrosoft SQL Server client, but the option file youprovided does not exist.

v You specified the TSMOPTFILE or FCMOPTFILEoption when starting the Data Protection forMicrosoft SQL Server client, but the configuration filethat you provided does not have appropriate readpermissions for the user that is running theoperation.

v You specified the CONFIGFILE option when startingthe Data Protection for Microsoft SQL Server client,but the configuration file you provided does notexist.

v You specified the CONFIGFILE option when startingthe Data Protection for Microsoft SQL Server client,but the options file that you provided does not haveappropriate read permissions for the user that isrunning the operation.

System action: Data Protection for Microsoft SQLServer client processing stops.

User response: Make sure that the file you want touse exists, it has the read rights set for the user that isrunning the operation, and it is in the standard fileencoding of the system. For example, on Windows theexpected file encoding is ANSI. Review the

configuration information in the Data Protection forMicrosoft SQL Server client manual specific to youroperating system. If the problem persists, ask yourData Protection for Microsoft SQL Server administratorfor further assistance.

ACO5400E The Virtual Device Interface is notregistered with the Common ObjectModel.

Explanation: The virtual device interface could not becreated because it is not registered with the commonobject model. The SQL server may not be installedproperly.


User response: Verify that the SQL server is installedproperly and retry the operation. Contact your servicerepresentative if the error persists.

ACO5401E The Virtual Device Interface could notbe created.

Explanation: The Virtual Device Interface could not becreated. The SQL Server Virtual Device Interface (VDI)log or Windows event log may contain moreinformation.


User response: If the SQL Server messages do notresolve the problem, retry the operation. Contact yourservice representative if the error persists.

ACO5402E The Virtual Device Set could not becreated.

Explanation: The Virtual Device Set could not becreated. The SQL Server Virtual Device Interface (VDI)log or Windows event log may contain moreinformation.



ACO5403E The configuration of the Virtual DeviceSet could not be obtained.

Explanation: The configuration of the Virtual DeviceSet could not be obtained. The SQL Server VirtualDevice Interface (VDI) log, SQL Server activity log, SQLServer error log, or Windows application event log maycontain more information.


User response: If the SQL Server messages do nothelp resolve the problem retry the operation. If theerror persists, contact your service representative.



ACO5404E The Virtual Device Set could not open avirtual device.

Explanation: The Virtual Device Set could not open avirtual device. The SQL Server Virtual Device Interface(VDI) log, SQL Server activity log, SQL Server errorlog, or Windows application event log may containmore information.



ACO5405E An unknown virtual device error hasbeen detected.

Explanation: A virtual device returned and unknownreturn code.\n" The SQL Server Virtual DeviceInterface (VDI) log, SQL Server activity log, SQL Servererror log, or Windows application event log maycontain more information.



ACO5406E The SQL Server closed a virtual deviceprematurely.

Explanation: The SQL Server aborted the operation onthe selected database. The SQL Server Virtual DeviceInterface (VDI) log, SQL server activity log, SQL Servererror log, or Windows application event log maycontain more information.



ACO5407E The SQL Server aborted the operation.

Explanation: The SQL Server aborted the operation onthe selected database. The SQL Server Virtual DeviceInterface (VDI) log, SQL Server activity log, SQL Servererror log, or Windows application event log maycontain more information.



ACO5421E Received the following from the MSCOM component:SQL message

Explanation: A SQL error has occurred.

System action: Processing for this operation ends.

User response: If the SQL server messages do notresolve the problem, retry the operation. Contact yourservice representative if the error persists.

ACO5422E Received the following from the MSSQL server:SQL message




ACO5423E The following string is too long: string




ACO5424E Could not connect to SQL server; SQLserver returned:SQL message




ACO5425E The SQL server is not running: SQLmessage



User response: Start the SQL server and retry theoperation.

ACO5426E The SQL log on does not have theSysadmin role: SQL message

Explanation: An attempt was made to logon to theSQL server but the specified logon name does not havethe Sysadmin role.


User response: Try the operation again and specify



either a log on name with the Sysadmin role or changethe specified log on name to have the Sysadmin role.

ACO5427E The SQL server version is less than 7.0:SQL message

Explanation: An attempt was made to use DataProtection for SQL Server V2 with a SQL server versionearlier than the version 7.0 level. This is not allowed.


User response: Use the Data Protection for SQL V1client with SQL server earlier than the version 7.0 level,or retry the operation with a SQL server verison 7.0 orlater.

ACO5428E The SQL server is not on the localmachine: SQL message

Explanation: An attempt was made to use theapplication client specifying a SQL server that was noton the local machine.


User response: Retry the operation on the machinewhere the SQL server resides.

ACO5429E Could not obtain an event from SQLserver: SQL message




ACO5430E The SQL Server Name is blank orNULL.

Explanation: In the query to obtain the SQL ServerName, the system returned a blank name. A valid SQLServer Name is necessary to continue the operation.

System action: Processing for the current operationends.

User response: Check the SQL Server Name by usingthe "select @@servername" command from the SQLQuery Analyzer. If that returns NULL, use the"sp_addserver" stored procedure to set the SQL ServerName to the correct value. After setting the SQL ServerName, retry the operation. Contact your servicerepresentative if the error persists.

ACO5431E Multiple dbnames are not allowed.

Explanation: An invalid RESTORE command wasissued. It is not valid to specify multiple databasenames in the <dbname> parameter list when using the/STANDBY, /RELOCATE, or /INTO options.


User response: Enter the command again with a validvalue in the positional parameter or option.

ACO5432E Equal numbers of the /RELOCATE and/TO options must be specified.

Explanation: Unequal numbers of the /RELOCATEand /TO options were specified on a RESTOREcommand.


User response: Re-enter the command specifying thesame number of /RELOCATE and /TO options.

ACO5433E Wildcards are not allowed as part of thefollowing parameters/options:

Explanation: This message displays the positionalparameters and/or options that were specifiedincorrectly.


User response: Re-enter the command specifying thecorrect parameters and/or options.

ACO5434E The following options cannot bespecified together:

Explanation: This message displays the conflictingcommand options that were entered.



ACO5435E This command requires one of thefollowing options:

Explanation: This message displays the options thatwere missing from the command entered.


User response: Re-enter the command specifying oneof the command options required by the command.

ACO5436E A failure occurred on stripe number(stripe number), rc = return code

Explanation: A failure occurred on the numberedstripe.


User response: There should be other messages alongwith this one. Refer to the other messages to determinethe problem.



ACO5450E The specified number of stripes (numberof stripes) is invalid. Processing willcontinue with the maximum number ofstripes (maximum number of stripes).

Explanation: An invalid number of stripes wasspecified.

System action: Processing continues utilizing theallowed maximum number of stripes.

User response: None

ACO5452E Unable to delete temporary object:(filespace name) (high level qualifier) (lowlevel qualifier)

Explanation: When a backup fails, the DP agentattempts to delete all temporary backup data objectsfrom the TSM server. This message indicates that thespecified temporary backup data object could not bedeleted from the TSM server. This error is usuallycaused by the loss of all TSM server sessions.


User response: None. A backup of the databaseshould detect the temporary backup data object anddelete it from the TSM server.

ACO5453E The number of TSM sessions (number ofsessions) is invalid for the specifiednumber of stripes (number of stripes).Processing will continue with thenumber of TSM sessions (number ofsessions) as the number of stripes.

Explanation: An invalid number of TSM sessions wasdetected for the specified number of stripes. Thismessage is caused by the circumvention of an internalerror.

System action: Processing continues utilizing thenumber of TSM sessions as the number of stripes.

User response: Try the operation again. Contact yourservice representative if this error persists.

ACO5454E The maximum number of objectsallowed per TSM transaction (number) isinvalid for the specified number ofstripes (number of stripes).Processing will continue with numberstripes.

Explanation: The maximum number of objectsallowed per TSM transaction is invalid for the specifiednumber of stripes for at least one of the TSM sessions.All TSM sessions must allow at least one more objectper TSM transaction than the number of stripes

System action: Processing continues utilizing the newnumber of stripes.

User response: Reduce the number of stripes. You canalso update the TSM server to increase the maximumnumber of logical files that a client can send to theserver in a single transaction (TxnGrpMax).

ACO5455E The backup is corrupt and can not berestored.

Explanation: The backup being restored is corruptbecause the data object or objects found do notcorrespond to the metadata.


User response: Try the operation again. Contact yourservice representative if the error persists.

ACO5456W The backup is corrupt and is not fullyrestorable.Processing will continue.

Explanation: The backup being restored is corruptbecause the data object or objects found do notcorrespond to the metadata. Depending on the restorecommand and the backup type, a partial restore maybe possible.


User response: Try the operation again. Contact yourservice representative if the error persists.

ACO5457E An unknown SQL API error hasoccurred.

Explanation: A SQL API error has occurred but theassociated error message could not be found. The SQLServer activity log, SQL Server error log, or Windowsapplication event log may contain more information.


User response: If the SQL Server messages do notresolve the problem, try the operation again. Contactyour service representative if the error persists.

ACO5458W The TSM Server 'backup delete' settingfor node (server node name) is set to NO.It should be set to YES for properoperation. Processing continues.

Explanation: The TSM Server setting that allows TSMclients to delete their own backups is set to NO for thespecified node name. The backup delete value must beset to YES in order for cleanup operations to completesuccessfully. A NO value means that unusable residualdata might be stored on the TSM Server.


User response: Make sure the 'backup delete' settingfor the specified node name is set to YES on the TSMServer. Your TSM Server administrator can change this



setting for your node. The setting can only be changedon the TSM Server.

ACO5459W Database object name excluded frombackup.

Explanation: The specified database was excludedfrom backup by the /EXCLUDEDB setting.

System action: Database isn't backed up.


ACO5460W Database object object name doesn't existor isn't valid.

Explanation: The specified backup object doesn't existor isn't valid.

System action: Processing for this backup object ends.

User response: Make sure the specified backup objectexists.

ACO5500E The MultiByteToWideChar() functionfailed.

Explanation: This is an internal error that indicatescorrupted storage.

System action: Processing for this database ends.

User response: Try the operation again. Contact yourservice representative if this error persists.

ACO5501E The Common Object Model (COM)library failed to initialize.

Explanation: The unsuccessful call wasCoInitializeEx(NULL,COINIT_MULTITHREADED).OLE32.dll or another COM DLL may be missing,down-level, or corrupted.

System action: Processing for this database ends.

User response: Verify your Windows installation iscomplete and try the operation again. Contact yourservice representative if this error persists.

ACO5550I There are no backups matching thefilespec directorypathfilename and theserver name servername.

Explanation: There are no database backups on theTivoli Storage Manager server for the specified servername.


User response: None

ACO5551I There are no backups matching thecriteria specified for server nameservername.

Explanation: There are no database backups on theTivoli Storage Manager server matching the querycriteria for the specified server name.


User response: Specify a broader range of searchcriteria when issuing this query.

ACO5552I No matches were found for the criteriaspecified.

Explanation: The SQL Server was searched fordatabases that matched the specified criteria.


User response: Check the specified search criteria(database name, group name, logical filename). Enterthe command again.

ACO5616W Database cannot be backed up becauseits name contains '\', '?', '*', or ':'character(s).

Explanation: Databases whose names containdirectory or volume separator cannot be backed up orrestored.

System action: Database was excluded from backup.

User response: Rename the database and restartbackup.

ACO5617I Database was excluded from backupbecause database name contains '\', '?',':' or '*' character(s).

Explanation: Databases whose names containdirectory or volume separator cannot be backed up orrestored.

System action: Database was excluded from backup.

User response: Rename the database and restartbackup.

ACO5629E No Backups have been selected forrestore.

Explanation: The Restore button was pressed butnothing was selected in the tree or list view.


User response: Make a selection in the tree or listview and press the Restore button again.

ACO5459W • ACO5629E


ACO5630E Backups from multiple Server instanceshave been selected for restore.

Explanation: The Restore button was pressed and theuser has selected backups from multiple serverinstances.


User response: Make a selection in the tree forbackups belonging to the same server instance only

ACO5631E Restoring full Legacy backups and fullVSS backups in the same restoreoperation is not supported. Retry therestores in separate operations.

Explanation: At least one VSS backup object and oneLegacy backup object were selected for a restore in thesame operation. This is not supported.


User response: Retry the restores specifying theLegacy backups and VSS backups in separateoperations.

ACO5715E Error writing option_name preference tothe configuration file.

Explanation: Could not write the specified preferenceto the configuration file.

System action: Preferences processing ends.

User response: Make sure you have a validconfiguration file, then try to update the preferenceagain.

ACO5716W An error was encountered with TivoliStorage Manager API initialization, rc =returncode.Examine the dsierror.log for moreinformation or determine if the TSMAPI is installed properly.

Explanation: Errors were encountered during anattempt to run setup for the Tivoli Storage ManagerAPI.


User response: Examine the dsierror.log file todetermine the problem. If this file does not exist, theTSM API may not be installed properly. If the TSM APIis not installed properly, install the TSM API and runthe command again.

ACO5717E Unable to log on to the SQL server.

Explanation: An error occurred while trying to log onto the SQL server.

System action: If running the client from thecommand line, the client ends. If running the client

from the GUI, a prompt is displayed to enter the SQLuser ID and password, or to choose Windowsauthentication.

User response: Make sure the SQL server is running.

ACO5718I When the view is refreshed allselections will be lost andan attempt will be made to expand thenew tree to thecurrently highlighted item. Do you wantto continue?

Explanation: The refresh toolbar button or pulldownmenu item has been selected.


User response: Select Yes to refresh the view or selectNo to leave the current view unchanged.

ACO5719I There are currently no backups on TSM.

Explanation: The SQL server name expansion buttonwas pressed on the Inactivate page.


User response: Either nothing was backed up to aTSM server or all active backups were inactivated.

ACO5720I No databases have been selected forbackup.

Explanation: The Backup button was pressed on theGUI but no databases were selected from the tree orlist.


User response: Select a database and press the Backupbutton again.

ACO5721I No backups have been selected forrestore.

Explanation: The restore button was pressed on theGUI but no backup objects were selected from the treeor list.


User response: Select a backup object and press theRestore button again.

ACO5722I No backups have been selected forinactivate.

Explanation: The Inactivate button was pressed on theGUI but no backup objects were selected from the treeor list.


User response: Select a backup object and press theInactivate button again.



ACO5723E A named mark must be specified.

Explanation: The "Stop At Mark" or "Stop BeforeMark" option was chosen but the named mark was notspecified.


User response: Enter a named mark or choose the"Stop At" option.

ACO5784E A log must be selected to use point intime.

Explanation: A log must be selected before settingpoint in time parameters.


User response: Select at least one log for restorebefore specifying a point in time.

ACO5804I Unable to get information. If data isbacked up to tape check the"Wait for Tape Mounts for FileInformation" checkbox.

Explanation: Processing stops.

System action: None

User response: Try checking the box specified in themessage.

ACO5959E Unable to run data protection operationsto a FlashCopy Manager virtual server.A valid FlashCopy Manager license filecould not be located.

Explanation: In order to perform data protectionoperations to a FlashCopy Manager virtual server, avalid license for FlashCopy Manager must be installedin the FlashCopy Manager installation directory. Thislicense file is named fcmclient.lic.


User response: Verify that the prerequisites identifiedabove are met and retry the operation. If the errorpersists, contact your service representative.

ACO5960E This product is not licensed to run dataprotection operations to a Tivoli StorageManager server.A valid DP for SQL license file couldnot be located.With the current licenses only dataprotection operations to a Flash CopyManager virtual server can be run.

Explanation: In order to perform data protectionoperations to a Tivoli Storage Manager server, a validlicense for TDP for SQL (called sqlclient.lic) must beinstalled. The TDP for SQL license should be installed

in the TDP for SQL installation directory.


User response: Verify that the prerequisites identifiedabove are met and retry the operation. If the errorpersists, contact your service representative.

ACO5961E The parameters /BACKUPMETHOD or/BACKUPDESTINATION or both areinvalid when performing data protectionoperations using a FlashCopy Managervirtual server.

Explanation: Data protection commands default to/BACKUPMETHOD=VSS and/BACKUPDESTINATION=LOCAL when performedagainst a FlashCopy Manager virtual server. TheFlashCopy Manager supports no other values for theseparameters. As a result it is no longer necessary tospecify these parameters. For compatibility with otherproducts values for /BACKUPMETHOD and/BACKUPDESTINATION can be specified as long asthey are set to their only valid values. This means that/BACKUPMETHOD can only be set to VSS and/BACKUPDESTINATION can only be set to LOCAL.


User response: Retry the command removing the/BACKUPDESTINATION and /BACKUPMETHODparameters.

ACO5965E Database state does not allow logbackup with TRUNCATE=YES.

Explanation: Database status is not Normal. Log hasto be backed up with truncation turned off.

System action: The backup operation failed.

User response: Back up log with TRUNCATE=NO.

ACO5966E Logical name was not found in thedatabase.

Explanation: The logical name specified duringrelocation was not found in the database.


User response: Specify the correct logical name andretry the operation.

ACO5969E Database state does not allow backuplog tail.

Explanation: Database status is not Normal. By nowwe only support backup the tail of the log whendatabase is not offline or damaged.

System action: The backup operation failed.

User response: Back up the tail of the log whendatabase status is normal.



ACO6065E Mount backup command failed. Themount point and / or backup specifiedis invalid.Please refer to dsmerror.log for furtherdetails.

Explanation: The mount backup command failed. Thebackup specified may already be mounted and or thedrive to map to may already be in used. Check if theprovided directory to contain the mount pointdirectories for all snapshots is an empty NTFS directorywithout hidden or system files and / or directories.


User response: Check to make sure that the backupspecified is not already mounted and that the drive tomap to is available. Repeat the command using anempty NTFS directory as the snapshots mount pointsdirectory.

ACO6066E Unmount backup command failed.Please refer to dsmerror.log for furtherdetails.

Explanation: The unmount backup command failed.The backup specified may not be mounted.


User response: Check to make sure that the backupspecified is mounted.

ACO6067E In the component list that is specified,the following object is not valid: 'object'.

Explanation: The command that is entered includes acomponent list. The list of components contains one ormore invalid objects. For example, when entering aBACKUP or RESTORE command, if the component listincludes a volume or mount point that is not valid or isnot eligible for back up, this message is displayed. Inaddition, the GUID volume name cannot be specified.For RESTORE, MOUNT BACKUP, or DELETEBACKUP commands, this message is displayed if thecomponent list contains a backup specification that isnot found in the backup inventory.


User response: Verify the correct syntax is used whenentering the command. If the message is displayedagain, verify the volume and mount point names arecorrectly identified. A misspelling can trigger thismessage.

ACO6104I Backup Type backup for database databasename is not supported fromnone-readable secondary replica.

Explanation: Database on none-readable secondaryreplica only supports full backup and copyonly backup.

System action: Run the same backup from primary

replica or readable secondary replica.

User response: Run the same backup from primaryreplica or readable secondary replica.

ACO6105I Differential backup database databasename from secondary replica is notsupported. Exclude it for backup.

Explanation: Differential backup databases fromsecondary replica is not supported.

System action: Run the same backup from primaryreplica.

User response: Run the same backup from primaryreplica.

ACO6110W Backup of database 'database name' isbypassed because it is offline. Databaseattributes are database attributes.

Explanation: Backup processing bypasses the offlinedatabase.

System action: Backup processing continues but theoffline database is skipped.

User response: Ensure that the selected database isonline or normal database and retry the backup.

ACO6111I Backup of database 'database name' isbypassed because it is a databasesnapshot. Database attributes aredatabase attributes.

Explanation: Backup processing bypasses the databasesnapshot.

System action: Backup processing continues but thedatabase snapshot is skipped.


ACO6112W Backup of database 'database name' isbypassed because it is in restoringstatus. Database attributes are databaseattributes.

Explanation: Backup processing bypasses the databasewith restoring status database.

System action: Backup processing continues but thedatabase with restoring status database is skipped.


ACO6113I Backup of database 'database name' isbypassed because it is a mirroreddatabase. Database attributes are databaseattributes.



Explanation: Backup processing bypasses the mirroreddatabase.

System action: Backup processing continues but themirrored database is skipped.


ACO6114W Backup bypassed some databasesbecause of their status.

Explanation: Backup processing bypasses the offline,snapshot, mirrored, or with restoring state database.

System action: Backup processing continues but somedatabases are skipped.

User response: Ensure that the skipped databases areonline, and retry the backup.

ACO6115I Backup of database 'database name' isbypassed because it is offline. Databaseattributes are database attributes.

Explanation: Backup processing bypasses the offlinedatabase.

System action: Backup processing continues but theoffline database is skipped.


ACO6116I Backup of database 'database name' isbypassed because it is in restoringstatus. Database attributes are databaseattributes.

Explanation: Backup processing bypasses the databasewith restoring status database.

System action: Backup processing continues but thedatabase with restoring status database is skipped.


ACO6117I Actions were taken to fix the errormessages ACO5436E and FMV0328E.

Explanation: This is an informational message to letyou know that the merge error was fixed.

System action: None

User response: None

ACO6201W The license for the Recovery Agent, partof the Tivoli Storage Manager forVirtual Environments, is either not validor not found.

Explanation: Warning: Without a valid license for theRecovery Agent, you cannot use parts of Tivoli Storage

Manager for Databases: Data Protection for SQL torecover Microsoft SQL databases from a VM backup.

System action: The software continues to run, but youcannot use Tivoli Storage Manager for Databases: DataProtection for SQL to recover Microsoft SQL databsesfrom a VM backup.

User response: Verify that the correct license file is inthe correct directory. If you use the installation wizard,the license file should be saved to the correct directory.

ACO6202W TSM Recovery Agent is either at anearlier level or not found. The VMbackup data query or restore is notissued.

Explanation: Warning: To issue the VM backup dataquery or restore, update the software. Please upgrade itto support this feature.

System action: The command is ignored andprocessing continues.

User response:

ACO6203I The tail-log backup of the databasefrom the secondary replica is notsupported. databases name is excludedfrom the backup process.

Explanation: Tail-log backups of databases from thesecondary replica are not supported.

System action: The database backup operation iscanceled.

User response: Run the backup from the primaryreplica.

ACO6204I The tail-log backup of the database namedatabase from the primary serverremoves the databases from the AAG.Do you want to continue?Enter 'Y' for Continue or 'N' to cancel.

Explanation: The tail-log backup of databases fromthe primary server removes databases from the AAG.

System action: If the database is not removed fromthe AAG, the SQL Server reports an error whencompleting the backup.

User response: To continue with the tail-log backupand remove database from the AAG, enter Y. To cancel,enter N.

ACO6205E The tdpsqlc command that was enteredexceeds the maximum length limit. Thelength limit of each option is 1790characters.

Explanation: The length of tdpsqlc command is toolong. It is invalid. When the length limit is exceeded,

ACO6114W • ACO6205E


the command is ignored. There is no truncation.

System action: tdpsqlc command will fail with error.An error message is displayed. The command is notprocessed.

User response: Check the length of tdpsqlc options,especially check the length of multiple databases name.If possible, enter abbreviated parameters and options. Ifmultiple database names are entered, the length of thedatabase names can cause this error.

ACO6206W Database '' was excluded from backupbecause the database name containsspecial string ''.

Explanation: There are certain characters and stringsthat conflict with Data Protection for SQL backupoperations. A database name that contained one of thespecial characters or strings was encountered during abackup operation. Therefore, it was excluded from thebackup.

System action: The database was excluded frombackup.

User response: Rename the database and retry thebackup.

ACO6206W


Appendix. Accessibility features for the Tivoli StorageManager product family

Accessibility features help users who have a disability, such as restricted mobilityor limited vision to use information technology products successfully.

Accessibility features

The IBM Tivoli Storage Manager family of products includes the followingaccessibility features:v Keyboard-only operation using standard operating-system conventionsv Interfaces that support assistive technology such as screen readers

The command-line interfaces of all products in the product family are accessible.

Tivoli Storage Manager Operations Center provides the following additionalaccessibility features when you use it with a Mozilla Firefox browser on aMicrosoft Windows system:v Screen magnifiers and content zoomingv High contrast mode

The Operations Center and the Tivoli Storage Manager server can be installed inconsole mode, which is accessible.

The Operations Center help system is enabled for accessibility. For moreinformation, click the question mark icon on the help system menu bar.

Vendor software

The Tivoli Storage Manager product family includes certain vendor software that isnot covered under the IBM license agreement. IBM makes no representation aboutthe accessibility features of these products. Contact the vendor for the accessibilityinformation about its products.

IBM and accessibility

See the IBM Human Ability and Accessibility Center (http://www.ibm.com/able)for information about the commitment that IBM has to accessibility.


http://www.ibm.com/able

http://www.ibm.com/able


Notices

This information was developed for products and services offered in the U.S.A.

IBM may not offer the products, services, or features discussed in this document inother countries. Consult your local IBM representative for information on theproducts and services currently available in your area. Any reference to an IBMproduct, program, or service is not intended to state or imply that only that IBMproduct, program, or service may be used. Any functionally equivalent product,program, or service that does not infringe any IBM intellectual property right maybe used instead. However, it is the user's responsibility to evaluate and verify theoperation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matterdescribed in this document. The furnishing of this document does not grant youany license to these patents. You can send license inquiries, in writing, to:

IBM Director of LicensingIBM CorporationNorth Castle Drive, MD-NC119Armonk, NY 10504-1785United States of America

For license inquiries regarding double-byte character set (DBCS) information,contact the IBM Intellectual Property Department in your country or sendinquiries, in writing, to:

Intellectual Property LicensingLegal and Intellectual Property LawIBM Japan Ltd.19-21, Nihonbashi-Hakozakicho, Chuo-kuTokyo 103-8510, Japan

The following paragraph does not apply to the United Kingdom or any othercountry where such provisions are inconsistent with local law:INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THISPUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHEREXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express orimplied warranties in certain transactions, therefore, this statement may not applyto you.

This information could include technical inaccuracies or typographical errors.Changes are periodically made to the information herein; these changes will beincorporated in new editions of the publication. IBM may make improvementsand/or changes in the product(s) and/or the program(s) described in thispublication at any time without notice.

Any references in this information to non-IBM websites are provided forconvenience only and do not in any manner serve as an endorsement of thosewebsites. The materials at those websites are not part of the materials for this IBMproduct and use of those websites is at your own risk.


IBM may use or distribute any of the information you supply in any way itbelieves appropriate without incurring any obligation to you.

Licensees of this program who want to have information about it for the purposeof enabling: (i) the exchange of information between independently createdprograms and other programs (including this one) and (ii) the mutual use of theinformation which has been exchanged, should contact:

IBM Corporation2Z4A/10111400 Burnet RoadAustin, TX 78758US

Such information may be available, subject to appropriate terms and conditions,including in some cases, payment of a fee.

The licensed program described in this document and all licensed materialavailable for it are provided by IBM under terms of the IBM Customer Agreement,IBM International Program License Agreement or any equivalent agreementbetween us.

Any performance data contained herein was determined in a controlledenvironment. Therefore, the results obtained in other operating environments mayvary significantly. Some measurements may have been made on development-levelsystems and there is no guarantee that these measurements will be the same ongenerally available systems. Furthermore, some measurements may have beenestimated through extrapolation. Actual results may vary. Users of this documentshould verify the applicable data for their specific environment.

Information concerning non-IBM products was obtained from the suppliers ofthose products, their published announcements or other publicly available sources.IBM has not tested those products and cannot confirm the accuracy ofperformance, compatibility or any other claims related to non-IBM products.Questions on the capabilities of non-IBM products should be addressed to thesuppliers of those products.

This information contains examples of data and reports used in daily businessoperations. To illustrate them as completely as possible, the examples include thenames of individuals, companies, brands, and products. All of these names arefictitious and any similarity to the names and addresses used by an actual businessenterprise is entirely coincidental.

COPYRIGHT LICENSE:

This information contains sample application programs in source language, whichillustrate programming techniques on various operating platforms. You may copy,modify, and distribute these sample programs in any form without payment toIBM, for the purposes of developing, using, marketing or distributing applicationprograms conforming to the application programming interface for the operatingplatform for which the sample programs are written. These examples have notbeen thoroughly tested under all conditions. IBM, therefore, cannot guarantee orimply reliability, serviceability, or function of these programs. The sampleprograms are provided "AS IS", without warranty of any kind. IBM shall not beliable for any damages arising out of your use of the sample programs.


Each copy or any portion of these sample programs or any derivative work, mustinclude a copyright notice as follows:Portions of this code are derived from IBM® Corp. Sample Programs.

© Copyright IBM® Corp. _enter the year or years_. All rights reserved.

Trademarks

IBM, the IBM logo, and ibm.com® are trademarks or registered trademarks ofInternational Business Machines Corp., registered in many jurisdictions worldwide.Other product and service names might be trademarks of IBM or other companies.A current list of IBM trademarks is available on the Web at "Copyright andtrademark information" at www.ibm.com/legal/copytrade.shtml.

Adobe is a registered trademark of Adobe Systems Incorporated in the UnitedStates, and/or other countries.

Linear Tape-Open, LTO, and Ultrium are trademarks of HP, IBM Corp. andQuantum in the U.S. and other countries.

Intel and Itanium are trademarks or registered trademarks of Intel Corporation orits subsidiaries in the United States and other countries.

Linux is a registered trademark of Linus Torvalds in the United States, othercountries, or both.

Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation inthe United States, other countries, or both.

Java™ and all Java-based trademarks and logos are trademarks or registeredtrademarks of Oracle and/or its affiliates.

UNIX is a registered trademark of The Open Group in the United States and othercountries.

Terms and conditions for product documentation

Permissions for the use of these publications are granted subject to the followingterms and conditions.

ApplicabilityThese terms and conditions are in addition to any terms of use for the IBMwebsite.

Personal useYou may reproduce these publications for your personal, noncommercialuse provided that all proprietary notices are preserved. You may notdistribute, display or make derivative work of these publications, or anyportion thereof, without the express consent of IBM.

Commercial useYou may reproduce, distribute and display these publications solely withinyour enterprise provided that all proprietary notices are preserved. Youmay not make derivative works of these publications, or reproduce,distribute or display these publications or any portion thereof outside yourenterprise, without the express consent of IBM.

Rights Except as expressly granted in this permission, no other permissions,

Notices 33

http://www.ibm.com/legal/copytrade.shtml

licenses or rights are granted, either express or implied, to the publicationsor any information, data, software or other intellectual property containedtherein.

IBM reserves the right to withdraw the permissions granted hereinwhenever, in its discretion, the use of the publications is detrimental to itsinterest or, as determined by IBM, the above instructions are not beingproperly followed.

You may not download, export or re-export this information except in fullcompliance with all applicable laws and regulations, including all UnitedStates export laws and regulations.

IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESEPUBLICATIONS. THE PUBLICATIONS ARE PROVIDED "AS-IS" ANDWITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED ORIMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIESOF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR APARTICULAR PURPOSE.

Privacy policy considerations

IBM Software products, including software as a service solutions, (“SoftwareOfferings”) may use cookies or other technologies to collect product usageinformation, to help improve the end user experience, to tailor interactions withthe end user, or for other purposes. In many cases no personally identifiableinformation is collected by the Software Offerings. Some of our Software Offeringscan help enable you to collect personally identifiable information. If this SoftwareOffering uses cookies to collect personally identifiable information, specificinformation about this offering’s use of cookies is set forth below.

This Software Offering does not use cookies or other technologies to collectpersonally identifiable information.

If the configurations deployed for this Software Offering provide you as customerthe ability to collect personally identifiable information from end users via cookiesand other technologies, you should seek your own legal advice about any lawsapplicable to such data collection, including any requirements for notice andconsent.

For more information about the use of various technologies, including cookies, forthese purposes, see IBM’s Privacy Policy at http://www.ibm.com/privacy andIBM’s Online Privacy Statement at http://www.ibm.com/privacy/details in thesection entitled “Cookies, Web Beacons and Other Technologies,” and the “IBMSoftware Products and Software-as-a-Service Privacy Statement” athttp://www.ibm.com/software/info/product-privacy.


http://www.ibm.com/privacy

http://www.ibm.com/privacy/details

http://www.ibm.com/software/info/product-privacy

Glossary

A glossary is available with terms and definitions for the IBM Tivoli Storage Manager family of products.

See Tivoli Storage Manager glossary (http://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.3/tsm/glossary.html).

To view glossaries for other IBM products, see http://www.ibm.com/software/globalization/terminology/.


http://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.3/tsm/glossary.html

http://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.3/tsm/glossary.html

http://www.ibm.com/software/globalization/terminology/

http://www.ibm.com/software/globalization/terminology/


IBM®

Product Number: 5608-E04

Printed in USA

Documents

IBM Tivoli Storage Manager for Databases: Data Protection ...Databases, Data Pr otection for Micr osoft SQL Server . Data Pr otection for Micr osoft SQL Server interacts with the IBM