26
Chanakya “The King of IT Certifications” IBM 000104 AIX 6.1 Administration Ver 6.1 Q&A 109 [email protected] [email protected] Chanakya was founded in 2008. The safer, easier way to help you pass any IT Certification exams. We provide high quality IT Certification exams practice questions and answers (Q&A). Especially Adobe, Apple, Citrix, Comptia, EMC, HP,IBM, Cognos, Microsoft, Business Objects ,Symantec, Juniper, LPI, Nortel, Oracle, SUN, VMware and Many more and help you pass any IT Certification exams at the first try. You can reach us at any of the email addresses listed below. http://doallcertificationhere.blogspot.com

IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

Embed Size (px)

Citation preview

Page 1: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

Chanakya “The King of IT Certifications”

IBM 000‐104 

AIX 6.1 Administration 

Ver 6.1

Q&A 109

[email protected]

[email protected]

Chanakya was founded in 2008. The safer, easier way to help you pass any IT Certification exams. We provide high quality IT Certification exams practice questions and answers (Q&A).

Especially Adobe, Apple, Citrix, Comptia, EMC, HP,IBM, Cognos, Microsoft, Business Objects ,Symantec, Juniper, LPI, Nortel,

Oracle, SUN, VMware and Many more and help you pass any IT Certification exams at the first try.

You can reach us at any of the email addresses listed below.

http://doallcertificationhere.blogspot.com  

 

 

Page 2: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Exam A

QUESTION 1Which command restores files from a volume group backup on a specified media?

A. mksysb -rB. savevg -rC. restorevg -rD. restorevgfiles

Answer: A

QUESTION 2Which of the following can an operator use to shutdown a system into single-user mode?

A. shutdown -dB. shutdown -sC. shutdown -mD. shutdown -Fr -s 1

Answer: C

QUESTION 3A non-root user can run rsh commands from serverA to serverB, but attempts to run rsh commands by theroot user return with a permission error message. What action will resolve the problem?

A. Add root user to the /etc/hosts.equiv on serverB.B. Create $HOME/.rhosts file for the root user on serverB.C. Restart the rshd daemon with root enabled option on serverB.D. Add entry to allow root user from serverA to the /etc/hosts.allow on serverB.

Answer: D

QUESTION 4A recently installed package needs to be rolled back to a previous version. Which of the followingcommands will perform the task?

A. rejectB. cleanupC. deinstallD. uninstall

Answer: A

QUESTION 5How can a JFS2 filesystem be added to a volume group that has insufficient space to host a log LV?

A. Create the filesystem with an inline log.B. Create the filesystem referring to the jfs2log in rootvg.C. Create the filesystem and format the logical volume with 'logform'.D. Create the filesystem's underlying logical volume with an inline log.

Answer: C

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 3: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

QUESTION 6Which of the following allows multiple applications to share a single operating system resource?

A. Logical PartitionB. Workload PartitionC. Dynamic Logical PartitionD. Shared Processor Logical Partition

Answer: B

QUESTION 7When ordering a new IBM Power Systems server, a customer is given the option of two types of HardwareManagement Console: 7042-CR4 and 7042-C06.Which main difference between the options would influence the customer's decision?

A. The 7042-CR4 is a rack mounted model, compared to the 7042-C06, which is a desktop.B. The 7042-CR4 is limited to 16 managed systems, compared to a limit of 32 for the 7042-C06.C. The 7042-C06 has faster CPUs and twice the RAM compared to the 7042-CR4, which is suited to large

enterprise deployments.D. The 7042-C06 can manage POWER5-based hardware, in addition to POWER6, while the 7042-CR4

can only manage POWER6-based hardware.

Answer: C

QUESTION 8Which port must be open on the HMC to allow remote web access?

A. 22B. 80C. 443D. 8080

Answer: C

QUESTION 9Which are the two main uses of a VIO server?

A. Virtualize network and memory to LPARs.B. Virtualize network and storage to LPARs.C. Virtualize memory and processors to LPARs.D. Virtualize storage and processors to LPARs.

Answer: B

QUESTION 10Which POWER6 virtualization technology is the minimum to enable multiple shared processor poolfunctionality?

A. PowerHA Standard EditionB. PowerVM Standard EditionC. Power6 Management Edition

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 4: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

D. Power6 Virtualization Edition

Answer: B

QUESTION 11What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX6.1?

A. 128 MBB. 256 MBC. 512 MBD. 1024 MB

Answer: B

QUESTION 12What is the theoretical maximum number of logical ports that a one port of a 2-port 10Gb IVE can provide ifno VIO Server is connected to the IVE?

A. 2B. 4C. 8D. 16

Answer: D

QUESTION 13An administrator wants to deploy a complex LPAR environment on a 595. What is the most current toolavailable for documenting the proposed LPAR configuration and determining if there are adequate IOresources?

A. LPAR Planning Tool.B. System Planning Tool.C. LPAR Validation Tool.D. System Validation Tool.

Answer: B

QUESTION 14Where will an administrator find documents in PDF format that include detailed architecture and step-by-step installation instructions for Power servers?

A. AIX Fix CentralB. IBM Developer WorksC. IBM Systems Software Information CenterD. IBM Systems Hardware Information Center

Answer: D

QUESTION 15Which of the following is a situation where dual (redundant) HMCs are recommended?

A. When managing more than four VIO servers.

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 5: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

B. When installed with Power 570 and larger hardware.C. When hosting both Linux and AIX on the same physical hardware.D. When unexpected outage on a single HMC would prove an untenable risk for the hosted LPARs.

Answer: D

QUESTION 16A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enoughfunding to purchase a single system.Which would be the most critical option to mitigate AIX availability?

A. Dual power supplies.B. Twice the amount of disk. C. Two dual-port LHEA adapters.D. Two dual-port fibre channel adapters.

Answer: A

QUESTION 17What is the difference between the CUoD and Utility Capacity On Demand?

A. Utility allows for activation of resources by the hour. CUoD allows for permanent access to additionalresources installed into the system.

B. Utility allows for permanent access to additional resources installed into the system. CuOD allows foractivation of resources by the hour.

C. Utility allows for activation of resources by the minute. CUoD allows for permanent access to additionalresources installed into the system.

D. Utility allows for a 30 day usage of additional resources installed into the system. CUoD allows forpermanent access to additional resources installed into the system.

Answer: C

QUESTION 18An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system isrunning AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection of media available.Which media should the administrator use?

A. Any AIX bootable media, providing it is a 64-bit variantB. Any AIX bootable media, providing it is AIX 5.1 or laterC. Any AIX 5.3 bootable media, providing it is TL09 or laterD. Any AIX 6.1 bootable media, providing it is TL02 or later

Answer: C

QUESTION 19In which file created by a mksysb would an administrator find filesystem and logical volume information?

A. /fs.dataB. /image.dataC. /bosinst.dataD. /install.data

Answer: B

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 6: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

QUESTION 20Which command can be used to show volume group information about filesystems and OS levels for aspecified mksysb called server1.mksysb?

A. lsmksysb -lf server1.mksysbB. restore -mrT server1.mksysbC. listbackup -fT server1.mksysbD. listvgbackup -l server1.mksysb

Answer: A

QUESTION 21A backup is taken using the following command: tar -cvf abcdef.tar /usr/local/include/tcpd.hThe operator is in the directory /usr/local/restores and runs the following command: tar -xvf abcdef.tarWhere will the file be restored?

A. /usr/local/include/tcpd.hB. /usr/local/restores/tcpd.hC. /usr/local/restores/include/tcpd.hD. /usr/local/restores/usr/local/include/tcpd.h

Answer: A

QUESTION 22An administrator is applying a corrective service to their HMC. The corrective service has been shipped on3 DVDs. Which action will ensure the corrective service is correctly installed?

A. Select the option to automatically reboot the HMC.B. Select the option to automatically reboot the HMC after each disk.C. Shutdown all managed LPARs prior to beginning the install process.D. Copy all disks into the ""SERVICE"" directory and select concurrent install.

Answer: A

QUESTION 23A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What mustbe done to donate any unused processing capacity to the shared processor pool?

A. In the HMC Properties, select the options to allow processor sharing when the partition is inactive andactive.

B. In the LPAR Properties, select the options to allow processor sharing when the partition is inactive andactive.

C. In the LPAR Profile Properties, select the options to allow processor sharing when the partition isinactive and active.

D. In the 595 Managed System Properties, select the options to allow processor sharing when partitionsare inactive and active.

Answer: C

QUESTION 24

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 7: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

The administrator changed the number of virtual processors from 1 to 2 in the default_profile of an LPAR.The operator ran the cfgmgr command expecting to see 2 processors after that, but did not see them.What action must be done to apply the changes?

A. Reboot AIX within the LPAR.B. Run cfgmgr against the device sys0.C. Shutdown and then activate the default_profile.D. Ensure the RSCT daemon is operative and run cfgmgr again.

Answer: C

QUESTION 25An administrator needs to recover an HMC due to a failed disk. The disk has been replaced, allowing theadministrator to reinstall the HMC back to the required release of software. Backups of both the HMCConsole Data and Upgrade Data are available.After reloading the HMC with the Recovery DVDs, what are the next steps to restore the HMCconfiguration?

A. Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC Data..B. Use the 'HMC Management > Restore Upgrade Data' option to first restore just the Upgrade Data.C. Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data and then the

Upgrade Data.D. Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade Data, and then

the HMC Data.

Answer: A

QUESTION 26An administrator is looking for the "Open Restricted Shell Terminal" option on the HMC GUI. Under whichpanel is this option available?

A. HMC Management, but only from a local connectionB. Service Management, but only from a local connection.C. Systems Management, but only from a local connection.D. Systems Management, but only from a remote connection.

Answer: A

QUESTION 27Following an unscheduled power outage, the administrator needs to power up an IVM-managed system.For the given system, what is the first step in this process?

A. Physically press the appropriate button on the system.B. Physically disconnect and reconnect the power cable on the system.C. Log into the IVM using a Web Browser, select the managed-system and select the Power on option

from the Operations menu.D. Log into the HMC using a Web Browser, select the managed-system and select the Power on option

from the Operations menu.

Answer: A

QUESTION 28An administrator wants to host several LPARs on a JS23 Blade server. To achieve this, what additionalmanagement software is required?

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 8: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

A. HMCB. IVMC. VIOSD. IBM Director

Answer: C

QUESTION 29On which HMC GUI panel can the 'Enable Electronic Service Agent' option be found?

A. HMC ManagementB. Systems ManagementC. Service ManagementD. Electronic Management

Answer: C

QUESTION 30The system hangs at boot time after starting NFS services. What is the most likely cause?

A. The action parameter of rcnfs in /etc/inittab is 'off' and the script called is not exiting.B. The action parameter of rcnfs in /etc/inittab is 'wait' and the script called is not exiting.C. The action parameter of rcnfs in /etc/inittab is 'once' and the script called is not exiting.D. The action parameter of rcnfs in /etc/inittab is 'respawn' and the script called is not exiting.

Answer: B

QUESTION 31The administrator created an entry in the inittab for run level 2. The system was already booted in normalmode. Which will start the newly created entry?

A. init 1B. /etc/rcC. telinit qD. /etc/rc.d/rc2.d

Answer: C

QUESTION 32How can an administrator view the service bootlist?

A. service -l bootlistB. bosboot -ad serviceC. listboot -l serviceD. bootlist -om service

Answer: D

QUESTION 33An administrator has mirrored rootvg onto hdisk1, after the physical volumes finished syncing theadministrator wants to add the new disk to the boot order.

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 9: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Currently the boot order looks like:hdisk0 blv=hd5 Which of the following commands will add hdisk1 to the current boot order?

A. bootset -a hdisk1B. bootlist -om normal hdisk1C. setbootlist -m hdisk0 hdisk1D. bootlist -om normal hdisk0 hdisk1

Answer: D

QUESTION 34After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which ofthe following tasks must be performed before changing the boot order?

A. Run a bosboot -a commandB. Mirror the hd5 on the two disksC. Set up another service mode bootlistD. Check the disks using a lsvg -p rootvg command

Answer: C

QUESTION 35A system was rebooted and is taking a long time to return. The administrator has logged into the HMC andsees reference code 0c9. What does this mean?

A. The system is configuring a device.B. A system initiated dump has started.C. The system is varyingon a volume group.D. The system is running an inbuilt self test.

Answer: B

QUESTION 36Which key should be pressed on an ASCII terminal during the system initialization to force the system toread from the default boot list?

A. 1B. 3C. 5D. 9

Answer: C

QUESTION 37An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the disk so itcan be used as the primary boot partition on the next reboot.Which command should the administrator use?

A. bosboot -ad hdisk2B. mkblv -y bootlv hdisk2C. crlv -t bootlv -d hdisk2D. bootlist -om normal hdisk2

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 10: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Answer: A

QUESTION 38A system has two configured fibre channel cards, one of which, fsc0, has failed and must be replaced.Which command should an administrator use to remove the card device and attached child devices?

A. rmdev -Rdl fcs0B. rmdev -cdl fcs0C. rmdev -cdl fscsi0D. rmdev -Rdl fscsi0

Answer: A

QUESTION 39Which command enables new devices that are connected to the scsi5 adapter without performing a fullscan of the system?

A. cfgmgr -f scsi5B. cfgmgr -i scsi5C. cfgmgr -t scsi5D. cfgmgr -l scsi5

Answer: D

QUESTION 40Which command will enable the administrator to query the current network adapter configuration?

A. netstat -vB. entstat -dC. lsattr -ElD. lsdev -C -attr

Answer: A

QUESTION 41Which command can be used to display information from the PvDv object class in the ODM?

A. odmlistB. odmshowC. lsdev -PD. lsattr -El

Answer: C

QUESTION 42Which command will allow the creation of a 10-character login user name?

A. chlogin -a log_name=10B. chdev -l sys0 -a max_logname=10C. chusr extended_logname=true [userid]D. chuser login_name=10 extended_logname=true [userid]

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 11: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Answer: B

QUESTION 43What is the correct method for deleting 'paging04' paging space?

A. swapoff paging04 rmps paging04B. swapoff /dev/paging04 rmps paging04C. swapoff paging04 rmps /dev/paging04D. swapoff /dev/paging04 rmps /dev/paging04

Answer: B

QUESTION 44Which command will activate a defined paging space?

A. swapon paging01B. chps a y paging01C. mkps a /dev/paging01D. swap a /dev/paging01

Answer: A

QUESTION 45How is the default print queue identified?

A. The first queue in queue config fileB. The stanza 'default = 1' is present in the queue config fileC. The backend @server has 'remback -p default' in the queue config fileD. The stanza 'default = [queuename]' is present in the queue config file

Answer: A

QUESTION 46A user is unable to determine the default system text editor. How can the local administrator assist the userby identifying the default text editor for the system?

A. Login as the user and run 'echo $ENV'. B. Login as root and run the 'env' command.C. Login as root and 'cat /etc/environment'.D. Login as the user and run the 'env' command.

Answer: B

QUESTION 47Which command will migrate a filesystem from one volume group to another?

A. cpfsB. cplvC. mkfscopyD. migratepv

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 12: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Answer: B

QUESTION 48A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed,the fibre cables are attached to the adapters.How should the administrator configure the disks?

A. Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run'cfgmgr' to discover and configure the disks.

B. Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run'cfgmgr' to discover and configure the disks.

C. Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run'cfgmgr' to discover and configure the disks.

D. Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run'cfgmgr' to discover and configure the disks.

Answer: D

QUESTION 49An administrator needs to configure a server (192.168.22.22) as a temporary solution for an NTP masterthat has stopped working.What is the process for configuring the NTP master?

A. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'fudge127.127.1.0 stratum 0', and then refresh the daemon.

B. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'master127.127.1.0 stratum 0', and then refresh the daemon.

C. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'fudge192.168.22.22 stratum 0', and then refresh the daemon.

D. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'master192.168.22.22 stratum 0', and then refresh the daemon.

Answer: C

QUESTION 50How should a DNS client be configured?

A. Edit the /etc/netsvc.conf file to have a nameserver and a domain search order. B. Edit the /etc/resolv.conf file to have a nameserver and a domain search order. C. Edit the /etc/resolv.conf file to have a nameserver, domain, and domain search order.D. Edit the /etc/netsvc.conf file to have a nameserver, domain, and domain search order.

Answer: C

QUESTION 51An administrator issued a command to update the firmware of an Ethernet adapter on a partitioned system,but received an error. What is the most likely cause of the problem?

A. The adapter must be taken offline prior to the firmware update.B. The system has not been rebooted since the adapter was added to the LPAR.C. The adapter must be assigned to the service partition prior to updating the firmware.D. The adapter must be dynamically removed from the LPAR prior to updating the firmware.

Answer: A

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 13: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

QUESTION 52A system is experiencing packet routing problems, when the administrator runs 'netstat -nr' the followingdefault routes are displayed: default165.253.251.1UG51601304 en8-- default192.168.50.1UGH01590450 en4-- Assuming the first route is correct, how can the administrator remove the incorrect default route?

A. route delete default 192.168.50.1B. access smit with the route_remove shortcutC. chdev -l inet0 -a delroute=net,-hopcount,0,,192.168.50.1D. flush the routing table from the console and configuring the 165.253.251.1 route

Answer: C

QUESTION 53An administrator has set up serverA and serverB to use the /etc/hosts.equiv file so that applications onserverA can remotely run commands on serverB.Which command will verify if a new user from serverA is trusted on serverB?

A. As the root user from serverA run the command rhost serverB.B. As the root user from serverA run the command rlogin serverB.C. As the desired user from serverB run the command rhost serverA.D. As the desired user from serverA run the command rlogin serverB.

Answer: D

QUESTION 54The ping loopback hangs with no output. Which of the following is the most likely cause?

A. The loopback interface is down and resolv.conf is configured.B. The loopback is not in /etc/hosts and resolv.conf is configured.C. The loopback interface is down and resolv.conf is not configured.D. The loopback is not in /etc/hosts and resolv.conf is not configured.

Answer: D

QUESTION 55After updating serverB's network configurations, an administrator notices that serverA, which resides in adifferent subnet, is unable to communicate with serverB via ssh or telnet. As ping's to the server fail, theadministrator logs onto serverB via a console and finds an available interface en0 in the 'up' state. Fromthe console connection, en0 can communicate with other servers in the same subnet.What is the most likely cause of the problem?

A. en0 has no associated ip address. B. serverB is missing its default route.C. serverB and serverA cannot connect due to a firewall. D. en0 has been set up to block traffic from servers that are in different subnets.

Answer: B

QUESTION 56A project requires a new server to be set up with the ability to automatically fail over its Ethernet connection

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 14: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

to a second connection if a network failure occurs. Which of the following provides greatest resiliency?

A. Two switch ports will be needed on a switch, two Ethernet cables will be needed for the server eachconnecting to two different Ethernet cards, and one IP address will be needed.

B. Two switch ports will be needed on two different switches, two Ethernet cables will be needed for theserver each connecting to two different Ethernet cards, and one IP address will be needed.

C. Two switch ports will be needed on two different switches, two Ethernet cables will be needed for theserver each connecting to two different Ethernet cards, two different IP addresses will be needed.

D. One switch port will be needed on one switch, a splitter will be needed to split the connection, twoEthernet cables will be needed for the server each connecting to two different Ethernet cards, and twodifferent IP addresses will be needed.

Answer: B

QUESTION 57Which daemon identifies available filesystems through the /etc/xtab file?

A. nfsdB. biodC. rpc.lockdD. rpc.mountd

Answer: D

QUESTION 58Which file contains the attributes used to setup a new user account when executing 'mkuser' without anyflags?

A. /etc/security/userB. /etc/security/passwdC. /etc/security/mkuser.sysD. /etc/security/mkuser.default

Answer: D

QUESTION 59Which command should be used to reset a failed login count?

A. chsecB. chusrC. passwdD. chgusrprf

Answer: A

QUESTION 60Which command will set the core size file to unlimited for the user 'webapp'?

A. no -p 'core=-1' webappB. chuser 'core=-1' webappC. setsenv -attr 'core=unlimited' webappD. chsec -f '/etc/security/limits' 'core=-1' webapp

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 15: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Answer: B

QUESTION 61Which environment variable must be changed in a user's profile so that upon login, the command promptidentifies the server?

A. PMTB. PS1C. PRTD. PT1

Answer: B

QUESTION 62Which command will change the user webserver's shell to ksh93?

A. chshell -ksh93 webserverB. chsh webserver /usr/bin/ksh93C. chuser -a shell=/usr/bin/ksh93 webserverD. setuid -a SHELL=/usr/bin/ksh93 -u webserver

Answer: B

QUESTION 63Which command will display the current control key settings?

A. 'tty -l'B. 'stty -a'C. 'lstty -a'D. 'terminfo -l'

Answer: B

QUESTION 64How should read, write and execute permissions for 'group' and 'other' be granted to all files anddirectories within the /app filesystem?

A. chmod -R 677 /appB. chmod -R 664 /appC. chmod -r 677 /appD. chmod -r 664 /app

Answer: A

QUESTION 65What should an administrator do to set up a required role for a user id that will allow it to start/stop WPARson the server?

A. On the desired WPAR: mkrole authorizations=aix.wpar.system newRole setkst -t role chuser roles=newRole default_roles=newRole user1

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 16: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

B. On the global environment: mkrole authorizations=aix.wpar.system newRole setkst -t role chuser roles=newRole default_roles=newRole user1

C. On the desired WPAR: Edit the /etc/security/authorizations file adding: 'newRole authorizations=aix.wpar.system' setkst -t role chuser roles=newRole default_roles=newRole user1

D. On the global environment: Edit the /etc/security/authorizations file adding: 'newRole authorizations=aix.wpar.system' setkst -t role chuser roles=newRole default_roles=newRole user1

Answer: B

QUESTION 66Which installation method enables the quickest recovery in the event of failure when upgrading from AIX5.3 to AIX 6.1?

A. Use alt_disk_install.B. Apply the upgrade without commit.C. Use a backup image from a NIM server.D. Use a mksysb image from a locally attached DVD-RAM.

Answer: A

QUESTION 67An administrator is installing AIX. The SMS panel lists the following network adapter: NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002The NIM server is running in another LPAR on the same managed system.What speed and duplex should be configured on this adapter?

A. 100/FullB. 1000/HalfC. 1000/AutoD. Auto/Auto

Answer: D

QUESTION 68An administrator migrates from AIX 5.3 to AIX 6.1. Upon completion, a client questions why files aremissing from /tmp. How should the administrator respond to the client?

A. Explain that the files never existed in the first place. B. Explain that during a Migration install the /tmp filesystem is overwritten. C. Explain that after a Migration install, all system filesystems will be empty. D. Explain that /tmp is temporary storage and files are automatically removed every 30 days.

Answer: B

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 17: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

QUESTION 69What are the steps required to perform a Preservation install on a server?

A. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade, Preservation install for the install type, and allow upgrade torun.

B. Shut down the server and perform a network boot from a local NIM server. Select Presevation install for the install type, and allow upgrade to run.

C. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade, Presevation install for the install type, and allow for upgrade torun.

D. Re-boot the server and NFS mount the bos images from a local NIM server. Run smit install. Select Presevation install for the install type, and allow upgrade to run.

Answer: A

QUESTION 70The output from an oslevel command results in the following warning message:Not all filesets for 61-00-040815_SP were found.Which command will display the filesets that are missing from this service pack?

A. lslpp -l |grep 'SP'B. lslpp -i 61-00-040815_SPC. instfix -icqv |grep ':-:'D. instfix -l 61-00-040815_SP

Answer: C

QUESTION 71Which LPP status signifies the inability to return to a previous version of a fileset because the saved fileshave been removed?

A. APPLIEDB. REMOVEDC. REJECTEDD. COMMITTED

Answer: D

QUESTION 72Which tool validates firmware and HMC compatibility for a proposed AIX upgrade?

A. SPTB. LVTC. FLRTD. SSIC

Answer: C

QUESTION 73Where can the Open Source prerequisite filesets that allow the installation of the Firefox Web browser befound?

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 18: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

A. Fix CentralB. IBM AIX ToolboxC. AIX Expansion PackD. Common base AIX CDs

Answer: B

QUESTION 74Which command is used to initialize and configure a NIM master?

A. /usr/sbin/nim_initB. /usr/bin/installnimC. /usr/sbin/nimconfigD. /usr/sbin/setup_server

Answer: C

QUESTION 75An administrator is defining an lpp_source called lpp_AIX6 in NIM when the following warning message isdisplayed in the output: warning: 0042-267 c_mk_lpp_source: The defined lpp_source does not have the 'simages' attributebecause one or more of the following packages are missing: bosbos.netbos.diagbos.sysmgtbos.terminfobos.terminfo.all.databos.mp64devices.commonbos.64bitWhat does this warning message mean?

A. The lpp_AIX6 is not a valid lpp_source NIM resource.B. The lpp_AIX6 can be used in NIM BOS operations to install AIX only on standalone clients.C. The lpp_AIX6 can be used in NIM CUST operations to install software on SPOTs and running

machines.D. The lpp_AIX6 does not contain all of the required software packages for NIM CUST installation

operations.WArialCourier NewTimes New RomanZ

Answer: C

QUESTION 76Refer to the following output:The current permanent system firmware image is EM340_041 The current temporary system firmware image is EM340_075 The system is currently booted from the temporary firmware image. Which command will display similar information?

A. lsmcodeB. diag -S 1C. prtconf | grep firmware imageD. invscout -vf [Server system name]

Answer: A

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 19: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

QUESTION 77Which describes the operation required to move to a new release level of system firmware?

A. DeferredB. TransientC. ConcurrentD. Disruptive

Answer: D

QUESTION 78An administrator needs to apply a Technology Level update. During the preview install, the output indicatesthat there is insufficient space in the /usr filesystem. Review of the root volume group indicates there areno available physical partitions, but the /test jfs2 filesystem is only 8% used.What is the most efficient method to use the available space in the /test filesystem to apply the update?

A. Use chfs to reduce the /test filesystemB. Use cplv to copy the /test filesystem to a smaller logical volumeC. Use migratepv l to move the /test filesystem to a different volume groupD. Backup the /test filesystem, remove it, and recreate it with a smaller size

Answer: A

QUESTION 79How can an administrator verify that the disk is still usable when the output of 'lspv' shows 'hdisk1' is in amissing state?

A. lspv -l hdisk1B. lscfg -l hdisk1C. lsattr -l hdisk1D. dd if=/dev/hdisk1 bs=512k count=10 of=/tmp/disk.txt

Answer: D

QUESTION 80Which of the following explains the relationship between a physical and logical partition?

A. A physical partition is hosted on one or more logical partitions. A logical partition is used whendescribing storage.

B. A logical partition is hosted on one or more physical partitions. A physical partition is used whendescribing storage.

C. A physical partition is used when describing only a SCSI or SAS disk. A logical partition is used whendescribing a SAN LUN.

D. A logical partition is used when describing only a SATA or SAS disk. A physical partition is used whendescribing RAID or mirrored arrays.

Answer: B

QUESTION 81A system has a mirrored data volume group that has a filesystem /data of 10 logical partitions. How manyphysical partitions will the filesystem have?

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 20: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

A. 1B. 2C. 10D. 20

Answer: D

QUESTION 82What must an administrator do to create two new volume groups on a system with only one spare disk?

A. Run the 'mkvg -M' command to create multiple volume groups on a single disk.B. Add a new disk to the system or release a disk from the one of the existing volume groups.C. Run the 'mkvg' command to create multiple volume groups on a single disk providing the disk does not

have a PVID.D. Run the 'mkvg' command to create multiple volume groups on a single disk providing the volume

groups have the same PP size.

Answer: B

QUESTION 83The 'lsvg -o' command is run with an output of only rootvg, but the server has another volume groupnamed datavg, which is not displayed.What is the likely cause?

A. datavg is in an offline state.B. 'lsvg -o' only displays the root volume group.C. 'lsvg -o' only displays the fist volume group.D. datavg has no filesystems and therefore, is inactive.

Answer: A

QUESTION 84An administrator wants to mirror an important filesystem between two disks without mirroring the entirevolume group. Which command should be used?

A. cplvB. mirrorvgC. mklvcopyD. migratelv

Answer: C

QUESTION 85The server host1 has been set up as a backup system with the following /etc/exports: /backups -rw How can a second server regularly use this disk space?

A. /usr/sbin/mkfs -s 8G -o nbpi=2048,frag=512 /dev/lv00 -b -l host1B. /usr/sbin/crnfsmnt -d /backups -l /backups host1 -R -X -v -S -b bg C. /usr/sbin/mknfsmnt -f /backups -d /backups -h host1 -a -S -t rw -w bg -gD. /usr/sbin/crfs -v nfs -g vg1 -A yes -p rw -m /backups -a logname=/dev/lv00

Answer: C

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 21: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

QUESTION 86A log logical volume is created as indicated below:

root@host1:/# mklv -a c -t jfs2log -b y datavg 1 loglv00root@host1:/# lsvg -l datavg datavg:LV NAMETYPELPsPPsPVsLV STATEMOUNT POINT loglv00jfs2log111closed/syncdN/AA new filesytem is then created using the new log logical volume. When the administrator attempts tomount the filesytem, the following error occurs:root@host1:/# mount /newfs mount: 0506-324 Cannot mount /dev/lv00 on /newfs: A system call received a parameter that is not valid. Which of the following actions will resolve this error?

A. Recreate the file system with -p rw flags and re-mount.B. Run 'logform /dev/loglv00' and hit 'y' to destroy all data.C. Run 'clrginfo -p' to clear the invalid filesystem parameter.D. Change 'account = true' value in /etc/filesystem to 'account = false'.

Answer: B

QUESTION 87Files /tmp/file2 and /tmp/file3 are hard linked to /tmp/file1.What will the result be if a user makes changes to /tmp/file2 at the same time another user tries to delete /tmp/file1?

A. All three files will contain the updates and will remain available. B. All three files will be deleted and no changes will be made to /tmp/file2.C. Only /tmp/file2 will contain the updates, but /tmp/file3 will remain available.D. Both /tmp/file2 and /tmp/file3 will contain the updates and will remain available.

Answer: D

QUESTION 88LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers. Whichcommand will validate that both storage paths are available?

A. lspathB. sdd query adapterC. pcmpath query adapterD. datapath query device

Answer: A

QUESTION 89Which command will check the errorlog size?

A. lssrc -s errordB. errorlog -histsizeC. /usr/lib/errdemon -lD. ls -l /var/adm/ras/errlog

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 22: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Answer: C

QUESTION 90Which command will display messages directed to the system console?

A. alog -t console -oB. cat /var/adm/ras/conslogC. cat /var/log/all/console.logD. grep CONSOLE /var/adm/messages

Answer: A

QUESTION 91Which command must be run to log a hardware repair entry in the errorlog?

A. diagB. cfgmgrC. errlogD. errlogger

Answer: A

QUESTION 92An administrator suspects problems on a SCSI hard disk, but upon running diagnostics, no errors werefound. What must be done to check the condition of the drive?

A. Run diag and select the 'Certify Media' task.B. Perform a read and write test on the disk and monitor errorlog.C. Update the disk firmware to the latest level and monitor errorlog. D. Format the disk to ensure bad blocks are omitted from the disk layout.

Answer: A

QUESTION 93Which command will debug the AIX kernel?

A. kdbB. snapC. trussD. trace

Answer: A

QUESTION 94Which command will determine if the Trusted Computer Base is enabled on a system?

A. getrunmodeB. getsecconfC. tcbck -displayD. odmget -q attribute=TCB_STATE PdAt

Answer: D

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 23: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

QUESTION 95Which command will list ODM class descriptions to provide the format needed to create a new class?

A. odmaddB. odmget C. odmshowD. odmcreate

Answer: C

QUESTION 96Which command shows dump components and controls live dump attributes?

A. dumpctrlB. sysdumpdevC. livedumpdevD. livedumpctrl

Answer: B

QUESTION 97Which command will retrieve /unix and dump from the dump device?

A. snap -RB. snap -DC. snap -UD. snap -N

Answer: B

QUESTION 98An application writes to a log file in the /logs filesystem that is full. After the log file is deleted, 'df' still showsthe filesystem as 100% full.What is the likely cause of the problem and what will resolve it?

A. The deleted file is still open by the application. The system must be rebooted before 'df' will show thereduction in the filesystem.

B. The deleted file is still open by the application. The application must be stopped before 'df' will show thereduction in the filesystem.

C. The filesystem is still marked as full in the /etc/fs.status file. The system must be rebooted before 'df'will show the reduction in the filesystem.

D. The filesystem is still marked as full in the /etc/fs.status file. The application must be stopped before 'df'will show the reduction in the filesystem.

Answer: B

QUESTION 99A booting system appears to be hanging with an LED code of 0c54. What is the likely cause?

A. An AIX install is in progress.B. The rootvg volume group is corrupt.

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 24: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

C. The TCPIP configuration is incorrect.D. At least one paging device cannot be varied on.

Answer: A

QUESTION 100An LPAR has hung during a reboot, reporting a 0552 LED code. What does this signify?

A. varyon of the paging device failed.B. fsck of the root (/) filesystem failed.C. varyon of the root volume group failed.D. IPL device could not be opened or a read failed.

Answer: C

QUESTION 101An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with referencecode 0c31.What is the most likely cause?

A. The system is waiting for user input to define console type lft0.B. The system is waiting for user input to define console type tty0.C. The system is waiting for user input to define console type vty0.D. The system is waiting for user input to define console type vsa0.

Answer: C

QUESTION 102NIM fails to successfully network-boot an LPAR and install AIX. The administrator wants to first rule outnetwork configuration or routing to be the cause. Which sequence of steps can be employed to debug the network-boot process?

A. 1. Comment out the bootps entry from the /etc/inetd.conf file on the LPAR. 2. Stop all running processes. 3. Restart inetd using the 'refresh -s inetd' command. 4. Flush the ARP table on the NIM master. 5. Initiate the network boot of the LPAR.

B. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM master. 2. Stop all running bootpd processes. 3. Restart inetd using the 'refresh -s inetd' command. 4. Start bootpd from the command line : '/usr/sbin/bootpd -s -d -d -d' 5. Initiate the network boot of the LPAR.

C. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM master. 2. Stop all running bootpd processes. 3. Restart inetd using the 'refresh -s inetd' command. 4. Start bootpd from the command line : /usr/sbin/bootpd -g nfs -d -d d 5. Initiate the network boot of the LPAR.

D. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM master. 2. Stop all running bootpd processes. 3. Restart the effected daemons using the '/etc/rc.tcpip' command. 4. Start bootpd from the command line : '/usr/sbin/bootpd -s -d -d -d' 5. Initiate the network boot of the LPAR.

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 25: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

Answer: B

QUESTION 103What can be done to enable the debug information for functions to be displayed when using 'ksh -x' todebug a script?

A. Run the script using 'ksh -fx'.B. Run the script using 'ksh -a function -x'.C. Edit the script and add 'set -x' at the beginning.D. Edit the script and add 'set -x' at the beginning of each function.

Answer: D

QUESTION 104Which command synchronizes or rebuilds the logical volume control block, the device configurationdatabase, and the volume group descriptor areas on the physical volumes?

A. syncvg rootvgB. synclvm rootvgC. varyonvg rootvgD. synclvodm rootvg

Answer: D

QUESTION 105An administrator is attempting to recover a filesystem that fails to manually unmount. The fsck commandproduces the following output: The current volume is: /dev/fslv02 File system is currently mounted. Invalid file system size in the primary superblock.Invalid file system size in the secondary superblock. Primary superblock is corrupt.Secondary superblock is corrupt. fsck: 0507-018 Superblock is corrupt and cannot be repaired. Both primary and secondary copies are corrupt. Cannot continue tried to mountWhich steps will resolve the problem?

A. Reboot the server into maintenance mode and run 'fsck' with the '-p' parameter while the filesystem ismounted.

B. Reboot the server into maintenance mode and run 'fsck' with the '-y' parameter while the filesystem isunmounted.

C. Force a umount of the filesystem with 'umount -F /dev/fslv02', and then run 'fsck -p /dev/fslv02' whilethe filesystem is unmounted.

D. Force a umount of the filesystem by varying off the hosting volume group and then varyon the volumegroup. This will permit 'fsck -y' to be run against the failing filesystem.

Answer: B

QUESTION 106The 'fsck -p /dev/lv00' command returned the following message:Not a recognized filesystem type What is the likely cause of the problem and how should it be resolved?

Chana

kya "

The K

ing of

IT C

ertific

ation

s"

Page 26: IBM 000 104 AIX 6.1 Administration - Yolaranjiths.yolasite.com/resources/000-104-Chanakya.pdf · Chanakya “The King of IT Certifications” IBM 000‐104 AIX 6.1 Administration

[email protected] | [email protected] | [email protected]

A. The file system superblock is dirty. It can be replaced from the VGDA.B. The logical volume superblock is dirty. It can be replaced from the VGDA.C. The file system superblock is dirty. It can be replaced from the secondary copy.D. The logical volume superblock is dirty. It can be replaced from the secondary copy.

Answer: C

QUESTION 107Which command will list all subsystem resources on a server?

A. lssrc a B. lssrc g C. lssrc l D. lssrc -s

Answer: A

QUESTION 108Which command starts Workload Manager?

A. wlmrunB. wlmstartC. wlmcntrlD. wlmstartup

Answer: C

QUESTION 109Where is the run date for an 'at' job located?

A. Within the job environment set upB. Within the user data of the at jobC. In the file name preceeded with a useridD. In a special file used by the cron daemon

Answer: A

Chana

kya "

The K

ing of

IT C

ertific

ation

s"