Upload
arjun-pleasant
View
217
Download
1
Tags:
Embed Size (px)
Citation preview
IAEAInternational Atomic Energy Agency
HPS 2009 MeetingMinneapolis 12 - 16 July 2009
International Atomic Energy Agency Efforts on International Atomic Energy Agency Efforts on Orphan Sources and Radioactively Contaminated Orphan Sources and Radioactively Contaminated
Material in the Metal Recycling IndustryMaterial in the Metal Recycling Industry
E. Reber, V. Friedrich, L. Jova Sed, IAEA
IAEA
Orphan disused teletherapy source accident in Samut Prakarn, Thailand (2000)
Teletherapy head with 15.7 TBq (425 Ci) 60Co source taken from storage location to be sold as scrap metal. Three workers at junkyard died from radiation exposure.
IAEA
Tarragona Scrap Metal Conference
• Goals:• Share
experiences
• Contribute to the resolution of the problems
IAEA
Overview
• Meeting organized by the Spanish Nuclear Safety Council (CSN) in cooperation with IAEA
• 250 participants and observers
• 66 countries represented
• 5 organizations represented
• 40 oral presentations made during 5 plenary sessions
• 4 panel sessions
• 38 posters presented
IAEA
A Few Technical Insights
• Scrap steel at clearance levels can activate alarms at portal monitors.• Detection systems at steel mills are normally optimized for gross
gamma counting and may be more sensitive for the detection of photons than border monitoring equipment
• Regulation of scrap metal collection and steel production facilities varies widely from country to country. In some countries licenses are issued and inspections related to radiation safety issues are conducted regularly. In some countries there are voluntary arrangements such as the Spanish Protocol.
• Regarding border monitoring, one European country recorded the following statistics concerning detection of radioactive material:• NORM 80%• Orphan Sources 12%• Lightening rods 6%• Other 2%
• Cost of detection systems at steel mills: ~100k$
IAEA
Conclusions
• Problem is global in nature and demands an urgent solution.
• Root of the problem is deficiencies in the control of radioactive sources and radioactive material. Noted that many countries have made commitments to the Code of Conduct on the Safety and Security or Radioactive Sources.
• Spanish experience with its Protocol has shown the value of an all-inclusive approach involving the scrap metal industry, the steel industry, national regulators, and the radioactive waste management organization.
IAEA
Conclusions
• Trans-border issues were highlighted:• Many countries feel that imported scrap metal contains most of the
radioactive material that causes them problems• No requirement to report the rejection of a load of scrap metal at a
border to the authorities in the neighbouring country• No international requirement for the certification of monitoring of
scrap metal being imported into or exported from a country• Differing acceptance criteria at borders
• A binding international protocol or agreement should be developed to unify the approach to trans-border issues concerning the presence of radioactive material in scrap metal.
IAEA
Conclusions
• Recycling of metal from the nuclear industry:• Potential presence of radioactive material in scrap metal
from the nuclear industry has made the steel industry reluctant to accept scrap metal from this source.
• Most of the metal from the nuclear industry that has been recycled has been used in a controlled application or returned for reuse within the nuclear industry.
• The release of cleared metals has not yet gained acceptance. Agreement on acceptance criteria for radionuclides in metal scrap and processed metal would be helpful in this regard.
IAEA
DS411 IAEA Safety Guide – Orphan DS411 IAEA Safety Guide – Orphan Sources and Other Radioactive Material Sources and Other Radioactive Material in the Metal Recycling and Production in the Metal Recycling and Production
IndustriesIndustries
IAEA
SCRAP METAL
ORPHAN SOURCES AbandonedLostStolenMisplaced
CONTAMINATED METALDecommissioningNORM from industries
scrap yard
scrap yard
scrap yard
scrap yard
RECYCLINGScrap yard, segregation,shredding, melting, productfinishing
Cleanproduct
Orphan sources Contaminatedmetal
Contaminatedproducts
Contaminatedby-products
Investigation, return, waste management
SCOPE
IAEA
Scope
• Scope: sealed radioactive sources and other radioactive material (i.e. material contaminated with activation/fission products and/or NORMs) that are present in scrap metal
• Focuses on responsibilities and actions from identification (detection) to regaining control (segregation and temporary storage)
IAEA
Future IAEA Activities
• DS411 to be submitted to Member States of the IAEA for 120-day comment period. Document should be published in 2010.
• Input from Member States to be requested at the IAEA’s General Conference in Sept. 2009 regarding the initiation of an international undertaking regarding trans-border issues.