i€¦ · i.box accessories SLIDING ACCESSORY BOARDS - FULL HEIGHT Wheel assemblies attached at the top of boards run smoothly in the i.box top track, while horizontally fitted guiding

technical

i.box

i.box A frameless free standing structureof glass modules and accessories thatcombine to optimise functionality andpromote information hubs within openplan environments.

i.box design, engineering and material selection is based on Schiavello’s environmental design principles to reduce environmental impact.

Indexmodule options 03junctions and connectors 04-05 introduction 06-07accessories 08product specifications 09

2400mmNominal(Floor to Ceiling)






i.boxoverview and layout examples

A 360° panoramic transparent structure enhancing openness and light. Subtle design makes it suitable for any area as a demountable, temporary or permanent structure.With a choice of either free-standing 2400mm or full height design i.box is versatile and unobtrusive to surrounding services.

Illustrated are examples showing the modularity of the i.box system and how modules configure to create stand-alone demountable structures. Also shown are examples of modules being combined and configured with existing solid surfaced walls.By combining the standard module sizes, and the range of complimenting accessories, the flexibility of the i.box system makes practically any requirement possible.

SINGLE i.box REGULAR2 m x 3 m

SINGLE i.box SQUARE4 m x 4 m



DOUBLE i.box TO EXISTING REAR WALL3 m x 3 m (each space)

TRIPLE i.box IN STAGGERED CONFIGURATION4 m x 4 m (each space)



300mmInfill

Module



Designates door opening and sliding direction

i.box_03

i.box application possibilites include:•Offices •Quietspaces•Waitingareas •Presentationrooms•Meetings|conferences •Productshowcases(furniture,cars)•Training|workshops •Coffeebar| zones•Thinktanks • Internethotspots(publicspaces)•Libraries •Pop-upretailing

DOUBLE i.box WITH CENTRE OPEN DIVIDING SPACE4 m x 4 m (each space)

QUAD i.box CONFIGURATIONdimensions: 2 spaces - 3 m x 3 m 2 spaces - 3 m x 4 m

FULL HEIGHT-DOUBLE i.box CONFIGURATION TO EXISTING REAR WALL2700 mm high (nominal) infill modules from 2400 mm2 m x 3 m

FULL HEIGHT-DOUBLE i.box CONFIGURATION TO EXISTING REAR WALLmodules 2700 mm high (nominal) floor to ceiling4 m x 4 m

LEGEND

Designates full module width of 1000 mm

Designates plaster or solid wall for i.box mount

1. 2. 4. 5. 8.3. 7.6.

i.box junctions I connections

• i.boxisacontemporary,framelessstructuredesignedtooptimise functionality via a host of intersection possibilities that include 3-way, 4-way and adjoining permanent walls.• Itisidealasameetingroomoranoffice.•Freestandingandconfigurabletoclientneeds.• Interchangeablepanelsmakei.boxquicktoassembleandeasyto relocate, meeting the ever changing needs of dynamic workspaces.•Uniquedesigndetailandapplication.•Supportedbyarangeofaccessories.

Configuration:•Standardheight2400mmbutbetween2100mmand2700mmalsoavailable upon request.•500mmor1000mmwideglassmodules,orcustomnominalwidths.•Modular-easilyreconfigurable.•Demountable-suitableasatemporary,semi-temporaryor permanent structure.

glass module

wall

wall

3 mm channeli.box small door jamb

i.box wallstarter

glass module

stainless stealdoor handle

glass door

floor track

glass module glass module

3-way joiner

packers

infill1.5 mm channel

floor track structural joiner


glass module

floor track inline joiner

glass module glass module glass module

glass module

corner joiner

floor track

duct

duct cover

37 mm

37 mm

100 mm

1.5mm channel

3mm channel

i.box wallstarter

infill

skirtingduct wall

1. 2. 4. 5. 8.3. 7.6.

[1] WALL STARTER ASSEMBLY(startingdoorjambsfromwalls)

[4] WALL STARTER ASSEMBLY(forovercomingexistingskirting)

[6] STRUCTURAL MULLION

[7] INLINE JOINER

[2] 3 - WAY 90° JUNCTION

[5] WALL STARTER ASSEMBLY(standardconfiguration)

[3] POWER DUCT

[8] 2 - WAY 90° JUNCTION

i.box_05

snap on head track covers (optional)

head track

patch section

glass module

floor track

glass base adjuster

patch skirt


head track

patch section

glass module

floor track

glass base adjuster

patch skirt


head track

patch section

glass module

structuralmullion

floor track

glass base adjuster

patch skirt

head track

top fullpatch assembly

inline joiner

butt join in floor track

head track

cornerpatch assembly

corner joiner


glassmodule

floortrack

glassmodule

floortrack

head track

three waypatch assembly

three way joiner


glassmodule

floortrack

head track

top halfpatch assembly

shelf mount


glassmodule

floortrackand skirting

floor track inline joiner


glass module

glass module

corner joiner

floor track

floor track


3 way joiner

floor track structural joiner


14.4 mm

13.2 mm

75 mm

75mm

74.5 mm

120 mm

13.2 mm

79.80 mm

120 mm

135 mm

79.80 mm

50mm

100 mm

24.3 mm

14.4 mm

50 mm

80 mm

50 mm

80 mm


head track

patch section

glass module

floor track

glass base adjuster

patch skirt

79.80 mm

50mm

100 mm

i.boxintroduction

Key Features•Modulesare12mmthicktoughened(safety)glasswithpowdercoated aluminium floor tracks and top transom rails with accessory mounting capability.•Ultraslimaluminiummodulejoiners.•Standardmodulewidthstofacilitatefastassemblyandsimplify future re-arrangements.

•Selectionofglassfinishesandcoloursthatcanaccommodatevinyland optically clear printed graphics.•Glassdoormoduleswithinternalorexternalmount,capabilityplus optionalslidingorswingopening.Co-compliancewithAustralian Standards(physicaldisabilityA.S1428.1-2009,section13.5doorcontrols13.5.3)•SeamlesscompatibilitywithotherSchiavellosystems,includingUltimet andUnimettiletypepanelsystems.

INLINE JOINER ASSEMBLY

CORNER JOINER ASSEMBLY

plan-top assembly

plan-top assembly

plan-top assembly

plan-top assembly

plan-base assembly

plan-base assembly

plan-base assembly

plan-base assembly

elevation

elevation

elevation

elevation

inline joiner profile

corner joiner profile

three way joiner profile

three way joiner profile

section

section

section

section

THREE WAY JOINER ASSEMBLY

STRUCTURAL MULLION ASSEMBLYStructuralMullionsareloadbearingandareusedinlieuof‘inlinejoiners’,Theyconnectmodules as well as providing attachment for accessories. ie: shelves etc.


head track

patch section

glass module

powerduct

floor track

glass base adjuster

patch skirt

head track

headtrack

headtrack

GPO cutouttop fullpatch assembly

halfpatch

doordoor pelmet section

powerduct and cover

floortrack

floortrack

glassmount

glassmount

shelfmount

datacutout


glass module

glass module

duct

duct cover


glass door module

glass module

floor track

door guide profile

head track

patch section

patch skirt

ceiling

halfpatch

doordoor pelmet section

glass module

glass module

floor track

glazing channel

floor track

halfpatch

glass module

door

headtrack

doorpelmet

ceiling

ceiling

headtrack

glazingchannel

100 mm

35.7mm

48 mm

68 mm

94mm

35mm156 mm

266 mm

box section

doorpelmet

door pelmetsection

ceiling channel

SERVICEDUCT ASSEMBLYServiceduct panels are positioned betweenthei.boxglassmodules.Theyallow services cabling to be routed from either the floor or ceiling. Services outlets(power/data)aremountedtothe face of the powerduct providing convenient user access.

i.boxintroduction

plan-top assembly

plan-base assembly

plan-base assembly

plan-base assembly

plan-base assembly

elevation

elevation

elevation

elevation

service duct profile

ceiling channel profile

glazing channel profile

section

section

section

section

SLIDING DOOR ASSEMBLY

HEADTRACK TO CEILING(FULL LENGTH)

HEADTRACK TO CEILING(GLASS INFILL)

i.box_07

bar

screenflat screen

hook

code LEC-SS

Starter Socket

code LEC-TP

Tee - Plug

code LEC-EX-AS

Installation LeadRight Angle Socket

code LEC-JB

Junction Box

code LEC-EX

Installation Lead

Power Module Clip

code CLIP 62

LEC-PM4

code LEC-PM2

Dual Power ModuleQuad Power Module

code NGDM/2

NGDM/4

NGDM/6

Data modules

i.box accessories

SLIDING ACCESSORY BOARDS - FULL HEIGHTWheel assemblies attached at the top of boards run smoothly in the i.box top track, while horizontally fittedguidingwheelsrunagainstthebottomtrack.ThispermitstheeasymovementandpIacementofthe board to any position along the wall as required.

ADO STRING CURTAINExternal attachment to top track.Othercurtainstospecification.

HINGED DOOR (OPTIONAL)Self closing mechanism, available hingedleftorrighthand.Optionallocking.

STANDARD DOOR HANDLE

SHELVESAttachtovertical‘StructuralMullionsandpositionatrequiredheight.

PLASMA SCREEN MOUNTING BRACKETAttachestoeithertwoStructuralMullions,oralternativelyoneStructuralMullionandonesideofaPowerduct.

LETTRIC SOFTWIRING SYSTEMPowerisdeliveredtothei.boxPowerductviatheSchiavellosoftwiringsystem.Thesystemiseasilyconnected, disconnected or relocated without the need to isolate power and with minimal inconvenience.

width PSMB10001050mmwide PSMB20002050mmwide

depth 270mm

length 1600 mm

short shelf

depth 270mm

length 2600 mm

long shelf

Whiteboard

nominal panel heightx900mmwide

Graphic Panel

2385mmhighxnominal panel width

Fabric Covered Acoustic Board - pinnable

2385mmhighxnominal panel width

Resource Utilisation

EMS includes?

Management

WasteMinimisation Energy Emissions

MaterialsMinimisation

Product Stewardship Modular

Reusability

EMS?DurabilityEMSISO

14001Certifited?

EcoPreferredContent

Designedfor

Disassembly(Maximum

ratingavailable for

MAT-3)

ProductScore

(%)

PointsAwardedfor thisCredit

i-box <5% Yes Yes Yes Yes Yes Yes Yes Yes>10yrs >90% 83.3 3

product specificationsconstruction I finishes I accessories I cable reticulation I warranty I sustainability

Modularityi.box is a fully refined office partition system manufactured in Australia by Schiavello. It is a fully modular glass and aluminium based free standing structure, connected via ultra slim aluminium joiners.

i.box design, engineering and material selection is based on Schiavello’s environmental design principles to reduce environmental impact.

AssemblyHeadtrack sections are produced to a maximum length of 4.5 metres, before a steeljoining spline is necessary.

Standards12 mm toughened glass modules and doors tested to Australian standards AS1288, glass in buildings.i.box sliding door is co-compliant with Australian Standards (physical disability A.S 1428.1-2009, section 13.5 door controls 13.5.3).

FinishesAluminium components: powder coated in a range of exc:lusive and non-exclusive finishes.Glass modules: 12 mm toughened safety glass.Sound absorbing panels: available in a range of colours and fabric types.Whiteboards: available in both acrylic and vitreous enamel finishes.Powder coating: conforms to Australian Standards: Metal AS 4506-2005 Aluminium AS 3715-2002.Door hardware: incorporates heavy duty lock and stainless steel handles.

Rubber door jam buffer for soft closing doors.

DimensionsSize: 2400 H x 500 W modulesSize: 2400 H x 1000 W modules

Floor AllowanceRecommended variation in floor level to be within 10 mm, however, accompanied with laser line measurements, greater variations of up to 45 mm may be accommodated, dependent on circumstances.

For completely enclosed walls, i-box installations will be required to comply with building codes in regard to services such as ventilation, smoke alarms and fire sprinklers.

SustainableThe i.box Glass Module partitioning system is manufactured in our ISO AS/NZS 14001 externally accredited production facility. The system has a durability life span of >1Oyrs is entirely demountable, modular and designed for complete disassembly. The system can then be re-erected utilising 100% of all component parts.

When evaluating the system for its Green Star (MAT-3 Walls and Partition) performance the Schiavello EMS includes all of the items set out under the Green Star EMS criteria including product stewardship.Below is simplified MAT-3 calculation spreadsheet for the i.box system.

AccessoriesA PVC track guide is inserted into the i.box head track to facilitate the operation of wheeled accessories, including whiteboards and sound absorbing panels. The track and trolley system can be used in both inside and outside channels of the i.box headtrack. Up to 50kg of load per trolley is recommended. High load rollers are supplied with all sliding components and accessories;

- Clip in aluminium extrusions for covering the head track channels are optional extra for locations where it is visible from higher elevations. (note: sliding apparatus would be limited in use to either internal or external uses);

- Power duct for cable reticulation;

- Plasma mounts for mounting plasma or LCD screens;

- Custom shelving (Shelf braces satisfactory for 33kg point loads);

- Sound absorbing panels, available in a range of colours and fabric types and mounting to the i.box headtrack;

- Whiteboards - standard size from 2385 X 900 X 12 mm, mounting into the headtrack channel. The whiteboards are sourced and manufactured in Australia by Schiavello and utilize E-Zero MDF;

- Custom window furnishings - string or fabric curtains;

- Custom raised flooring finished in a range of fabric tiles.

Cable ReticulationThe system that can be hard or soft wired includes integrated components that provide efficient means of routing services cabling from the ceiling, walls or floor. ie: Powerduct allowing user convenient location of outlets. The softwiring electrical system is Schiavello Lettric certified to AS/NZS 3131 and AS/NZS 61535.

WarrantyThe manufacturer warrants the system for a period of not less than 5 years against faulty materials and workmanship and guarantees the supply of parts and service of all standard components for a period of not less than 10 years from date of installation.

schiavello.com/ibox SCH/MIB02-A

SchiavelloGroupPtyLtdreserves the right to change any or all details without prior notice. All dimensions stated within this document arenominaland/orapproximate only and subject to variation.

Melbourne Head OfficeSchiavello(Vic)PtyLtd1 Sharps RoadTullamarineVICAustralia3043T:61)393308888F:61)393308899

Melbourne ShowroomSchiavello(Vic)PtyLtdMetropol8WhitemanStreetSouthbankVICAustralia3006T:61)396741500F:61)396741650

AdelaideSchiavello(SA)PtyLtdGroundFloor,101CurrieStreetAdelaideSAAustralia5000T:08)81122300F:08)82311419

BrisbaneSchiavello(Qld)PtyLtd265CoronationDriveMiltonQLDAustralia4064T:07)33683388F:07)33682125

CanberraSchiavello(ACT)PtyLtd2-6CollieStreetFyshwickACTAustralia2609T:02)61240500F:02)62804370

PerthSchiavello(WA)PtyLtd1315HayStreetWestPerthWAAustralia6005T:08)94206588 F:08)93221337

SydneySchiavello(NSW)PtyLtd69CampbellStreetSurryHillsNSWAustralia2010T:02)92113311F:02)92123788

SingaporeSchiavelloSingaporePteLtdNo.1MagazineRoad#01-05CentralMallSingapore059567T:65)65338011F:65)65332811

Documents

i€¦ · i.box accessories SLIDING ACCESSORY BOARDS - FULL HEIGHT Wheel assemblies attached at the top of boards run smoothly in the i.box top track, while horizontally fitted guiding