Material Safety Data Sheet

1 . Identification of the material and supplier

Hypogear 80W-90Product name

461023SDS #

Product use Automotive gear lubricantFor specific application advice see appropriate Technical Data Sheet or consult our companyrepresentative.

BP Australia Pty Ltd (ABN 53 004 085 616)Melbourne Central,360 Elizabeth Street,Melbourne,Victoria 3000,AustraliaTel: +61 (03) 9268 4111Fax: +61 (03) 9268 3321

Supplier

1800 14 14 74EMERGENCY TELEPHONENUMBER

Technical Help Line 1 300 139 700 (Local Call)OTHER PRODUCTINFORMATION

Product code 461023-AU11, AU31

Hazards identification2 .

NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS.Statement ofhazardous/dangerous nature

Composition/information on ingredients3 .

Highly refined mineral oil and additives

Ingredient name

Base oil - unspecified 64742-62-7 20 - 50Mixture. Contains Mineral oil, mist proprietary 1 - 5

Other ingredients, determined not to be hazardous according to NOHSC criteria, make up the product concentration to 100%.

%CAS no.

Skin contact

In case of contact, immediately flush eyes with a copious amount of water for at least 15 minutes. Getmedical attention if irritation occurs.

In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing andshoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention ifirritation develops.

4 .

If inhaled, remove to fresh air. Get medical attention if symptoms appear.

Notes to physician Treatment should in general be symptomatic and directed to relieving any effects.

Inhalation

Eye contact

First-aid measures

Ingestion Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouthto an unconscious person. If large quantities of this material are swallowed, call a physicianimmediately.

Fire-fighting measures5 .

Extinguishing Media

Not Suitable

Suitable In case of fire, use water fog, foam, dry chemical or carbon dioxide extinguisher or spray.

Do not use water jet.

Unusual fire/explosionHazards

None identified.

Hazards from combustionproducts

These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2 etc.), phosphates.

Date of issue 1 March 2006

Page: 1/5Hypogear 80W-90Product name Product code

Version 1 Format LanguageAustralia

461023-AU11, AU31

Build 2.3.0

ENGLISH

(Australia)

None identified.

Fire-fighters should wear self-contained positive pressure breathing apparatus (SCBA) and full turnoutgear.

Protection of fire-fighters

Special fire-fightingprocedures

Emergency Procedures

Personal protection in caseof a large spill

Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitableprotective equipment (See Section: "Exposure controls/personal protection"). Follow all fire fightingprocedures (See Section: "Fire-fighting measures").

Splash goggles. Full suit. Vapour respirator. Boots. Gloves. A self-contained breathing apparatusshould be used to avoid inhalation of the product. Suggested protective clothing might not besufficient; consult a specialist BEFORE handling this product.

6 . Accidental release measures

If emergency personnel are unavailable, contain spilled material. For small spills add absorbent (soilmay be used in the absence of other suitable materials) scoop up material and place in a sealed,liquid-proof container for disposal. For large spills dike spilled material or otherwise contain material toensure runoff does not reach a waterway. Place spilled material in an appropriate container fordisposal. Avoid contact of spilt material with soil and prevent runoff entering surface waterways. SeeSection 13 for Waste Disposal Information.

Methods and materials forcontainment and clean-up

Handling

Handling and storage

Storage

7 .

Wash thoroughly after handling. Avoid strong oxidisers.

Keep out of the reach of children.Keep container tightly closed. Keep container in a cool, well-ventilated area.

Combustibility Classification Combustible liquid Class C2 (AS 1940).

Ingredient name Occupational exposure limits

8 . Exposure controls/personal protection

Base oil - unspecified NOHSC (Australia).TWA: 5 mg/m3 8 hour(s). Form: Oil mist, mineral

Where there are no regulatory exposure limits, for information and guidance, the ACGIH values are included.For further information on these please consult your supplier.

Provide exhaust ventilation or other engineering controls to keep the relevant airborne concentrationsbelow their respective occupational exposure limits.

Control Measures

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smokingand using the lavatory and at the end of the working period.

Hygiene measures

Biological Limit Values No biological limit allocated.

Personal protective equipment

None required; however, use of adequate ventilation is good industrial practice.Respiratory system

None required; however, use of protective clothing is good industrial practice.Skin and body

Recommended: nitrile gloves The correct choice of protective gloves depends upon the chemicalsbeing handled, the conditions of work and use, and the condition of the gloves (even the bestchemically resistant glove will break down after repeated chemical exposures). Most gloves provideonly a short time of protection before they must be discarded and replaced. Because specific workenvironments and material handling practices vary, safety procedures should be developed for eachintended application. Gloves should therefore be chosen in consultation with the supplier/manufacturerand with a full assessment of the working conditions.

Hands

Safety glasses with side shields.Eyes

Whilst specific OELs for certain components are included in this SDS, it should be noted that other components of the preparation will bepresent in any mist, vapour or dust produced. For this reason, the specific OELs may not be applicable to the product and are providedfor guidance purposes.

Physical and chemical properties9 .

Flash point 174 C (Closed cup) Pensky-Martens.

Colour Amber.

Physical state Liquid.

Odour Strong.

Not available.

Not available.

Boiling point / range

Melting point / range

Heat of combustion Not available.

Date of issue 1 March 2006

Page: 2/5Hypogear 80W-90Product name Product code

Version 1 Format LanguageAustralia

461023-AU11, AU31

Build 2.3.0

ENGLISH

(Australia)

14 . Transport information

Not classified as dangerous for transport (ADG, IMDG, ICAO/IATA).

No known special precautions required. See Section: "Handling and storage" for additional information.Special precautions for user

Regulatory information15 .

Standard for the Uniform Scheduling of Drugs and Poisons

No Listed Substance

Ingredient name Schedule

Control of Scheduled Carcinogenic Substances

Ingredient name ScheduleNo Listed Substance

Other Classification Information

US INVENTORY (TSCA): Not determined.

AUSTRALIAN INVENTORY (AICS): In compliance.

CANADA INVENTORY (DSL): In compliance.

CHINA INVENTORY (IECS): In compliance.

EC INVENTORY (EINECS/ELINCS): In compliance.

JAPAN INVENTORY (ENCS): In compliance.

KOREA INVENTORY (ECL): In compliance.

PHILIPPINE INVENTORY (PICCS): In compliance.

Inventories

Other regulations

Other information16 .

History

Date of issue 01/03/2006.

No Previous Validation.Date of previous issue

Prepared by Product Stewardship

Notice to reader

AMP = Acceptable Maximum PeakACGIH = American Conference of Governmental Industrial Hygienists, an agency that promulgatesexposure standards.ADG = Australian Code for the Transport of Dangerous Goods by Road and RailADG Code = Australian Code for the Transport of Dangerous Goods by Road and RailCAS Number = Chemical Abstracts Service Registry NumberHAZCHEM Code = Emergency action code of numbers and letters which gives information toemergency services. Its use is required by the ADG Code for Dangerous Goods in bulk.ICAO = International Civil Aviation Organization.IATA = International Air Transport Association, the organization promulgating rules governing shipmentof goods by air.IMDG = International Maritime Organization Rules, rules governing shipment of goods by water.IP 346 = A chemical screening assay for dermal toxicity. The European Commission hasrecommended that Method IP 346 be used as the basis for labelling certain lubricant oil base stocksfor carcinogenicity. The EU Commission has stipulated that the classification as a carcinogen neednot apply if it can be shown that the substance contains less than 3% DMSO extract as measured byIP 346. (See Note L, European Commission Directive 67/548/EEC as amended and adapted.) DMSOis a solvent.NOHSC = National Occupational Health & Safety Commission, AustraliaTWA = Time weighted averageSTEL = Short term exposure limitUN Number = United Nations Number, a four digit number assigned by the United Nations Committeeof Experts on the Transport of Dangerous Goods.

Key to abbreviations

Date of issue 1 March 2006

Page: 4/5Hypogear 80W-90Product name Product code

Version 1 Format LanguageAustralia

461023-AU11, AU31

Build 2.3.0

ENGLISH

(Australia)

All reasonably practicable steps have been taken to ensure this data sheet and the health, safety and environmental informationcontained in it is accurate as of the date specified below. No warranty or representation, express or implied is made as to the accuracy orcompleteness of the data and information in this data sheet.

The data and advice given apply when the product is sold for the stated application or applications. You should not use the product otherthan for the stated application or applications without seeking advice from us.

J"#('#"1*#3'*.='#!