291-800-TEST-INSTRUMENTS

PCE-313 AProfessional Thermohygrometer with SD Card Memory / Data Logger

•measures temperature and humidity by internal sensor and temperature by K type thermocouple• calculates the dew point and wet bulb temperature• internal real-time memory via SD card (1 ... 16 GB)• the stored data are saved directly to the SD card in Excel format• 2 GB SD card and card reader included in the delivery• optional software to transfer data to the PC in real time

(software is not needed to analyse the stored data)•PCE-313 S model includes sintered cap

TECHNICAL SPECIFICATIONSMeas. range RH: 5 ... 95 % / Temperature: internal sensor 0 ... +50 °C / K type -50 ... +1300 °CResolution 0.1 % RH / 0.1 °CAccuracy RH: ±3 % at >70 % RH / ±3 % of reading ±1 % at <70 % RH Temperature (internal sensor): ±0.8 °C / Temperature (type K): ± 0.4 % + 0.5 °CMemory SD card (1 ... 16 GB)Measurement rate 1 ... 3600 s (adjustable)Interface RS-232Display LCDOperating cond. 0 ... +50 °C, < 85 % relative humidityPower supply 6 x 1.5 V batteries Dimensions 177 x 68 x 45 mmWeight 490 gINCLUDESThermohygrometer, combined temperature and humidity sensor, SD memory card (2 GB), card reader, batteries, instruction manualITEM NO. ITEM K-PCE-313A thermohygrometer OPTIONAL ACCESSORIES K-PCE-313 S thermohygrometer / data logger (like PCE-313 A), with sintered cap K-SOFT-LUT-B02 RS-232 data cable with software to transfer data in real time K-CAL-PCE-HT110 ISOcalibrationcertificateK-CAL-SET-RF calibration set 33% / 75% RH

PCE-G1 and PCE-G1ADisplay for Temperature and Humidity

• visible from distances of up to 50 m• clearly readable LED digits with a height of 100• the measured temperature and humidity values are

displayed in turns• 4 ... 20 mA output / quick response time• long-term stable sensor• IP 54 protection

TECHNICAL SPECIFICATIONSMeas. range 10 ... 95 % RH / 0 ... +60 °CResolution 1 % RH / 1 °CAccuracy ± 2 % RH / ± 1 °CSensor capacitive / Pt1000 / 1 m cable Output 4 ... 20 mAResponse time 4 sDisplay LED 100 mmVisibility from approx. 50 mPower supply 230 V / 50 ... 60 HzDimensions sensor: 50 x 70 x 20 mm display: 175 x 175 x 75 mmWeight 1300 gINCLUDESDisplay, sensor for RH and temperature, mains cable, instruction manualITEM NO. ITEM K-PCE-G1 display K-PCE-G1A display with analogue output OPTIONAL ACCESSORIES K-CAL-PCE-G1 ISOcalibrationcertificate

Hygrometer / Air Quality Meter

141www.pce-instruments.com/english

PCE-LDC 2Camera to Detect and Capture Compressed Air Leakages

• ultrasonic measurement with visual representation of leakages / discharge localisation• image of the leakage - localisation is saved and numbered along with date, time and sound level• continuous measurement of dB, RMS and MAX value• colour display with bar indication• adjustable gain of 50 ... 110 dB• adjustable frequeny of 34 ... 46 kHz• powered by rechargeable battery, max. 6 hours• data transfer to PC via USB interface

TECHNICAL SPECIFICATIONSSensitivity detects leakages of 0.1 mm at 3 bar, distance of 20 mWarm-up time approx. 90 sDetactable gases R22, R134a, R404, R407C, R410A...Target window square and target cross, slight leakages in yellow, considerable leakages in redTest cycle continuousSensor length: 390 mm bandwidth: ±2 kHz up t o 6 dB fundamental frequ.: 40 kHz ±1 kHz mixed frequ.: adjustable 34 ... 46 kHz gain: automatic or adjustable from 50 ... 110 dBoptional: senosrwithflexiblegooseneckfor areasdifficulttoaccess,400mm; contact sensor for steam traps and mechanical applicationsHeadphones volume adjustable from 0 ... 10Functions real-timeRMS,max.RMS; brightness of display and camera adjustablefrom0...10;Languages English, German, French

Interface USBMemory up to 1000 imgaesCamera 640 x 480 pixelsImage format JPEGDisplay LCcolourdisplay3.5“; 320 x 240 pixelsPower supply recharg. li-ion battery 5 V dc, 2 A, charging time approx. 5 hOperating cond. -10 ... +50 °CBattery life approx. 6 h (normal use)Dimensions 230 x 100 x 70 mmWeight device: approx. 580 g complete delivery cont.: approx. 4 kgINCLUDESLeak detection camera, headphones, rechargeable battery, charger, USB cable, softw., metal case, manualITEM NO. ITEM

K-PCE-LDC 2 leak detection camera

OPTIONAL ACCESSORIES K-PCE-LDC-Flex sensorwithflexiblegooseneck, 400 mmK-PCE-LDC-Probe contact sensor

Air Quality Meter

TECHNICAL SPECIFICATIONSSensitivity adjustable (high & low)Warm-up time approx. 90 sDetectable gases R22, R134a, R404, R407C, R410A...Test cycle continuousSensor length 390 mm sensor with gooseneckDisplay multi-colour LEDPower supply 4 x 1.5 V AA batteriesBattery life approx. 40 h (with normal use)Automatic power Off after 10 minOperating conditions -10 ... +60 °C / <70 % RHDimensions 173 x 66 x 56 mmWeight 400 gINCLUDESGas leak indicator, sensor, testing agent, carrying case, batteries, instruction manualITEM NO. ITEM K-PCE-LD 1 gas leak indicator OPTIONAL ACCESSORIES K-ESS-PCE-LD 1 replacement sensor

Not to be used for flammable gases!!!

PCE-LD 1Gas Leak Indicator for Refrigerants

• for refrigerants R22, R134a, R410A, R407C, ...• can be used anywhere• sensor at the end of a gooseneck of 390 mm• acoustic and visual alarm•multi-colour LED shows concentration of gas

TOPseller

142 www.pce-instruments.com/us

TECHNICAL SPECIFICATIONSResponsetime.flammablegases20s,toxicgases20s,oxygen10sAlarm acoustic (95 dBA), visual (LED red / blue), internal vibrationSampling optional hand-operated bellows pumpData protocol capacity for 5000 events, including: switch on / off, battery level, activated / deleted alarms, peak values, passed or failed gas test, all events time-stampedMemory pre-set: 900 hours of storage at 1 min. intervals, storage intervals can only be changed using the softwareInterface RS-232 via module in charger, USB adaptor optionalCalibration routinely by means of Autocalibrator II or via PC softwareDisplay LCD with backlight, battery level indicator, indicates when calibration and maintenance is necessaryIndication real-time gas values, retrievable peak values and TWAPowersupply rechargablelithiumionbattery(flammablegases,CO2) / non-rechargable lithium cell (toxic gases and oxygen)Op. conditions -20 ... +55 °C / 0 ... 99 % RHApprovals ATEX II 1G EEx ia IIC T4 (ambient temp. -20 ... +55 °C) toxic gases and oxygen / ATEX II 2G EEx iad IIC T4 (oper. temp. -20 ... +55 °C) flammablegasesNorms EN50014, EN50020, EN50018, 94/9/EC, EN50270, EN50271, EN61779 software designed to meet IEC61508INCLUDESGas detector with sensor, pocket clip, battery or Li-Ion battery with charger (depending on thegas),calibrationcertificate,instructionmanual

GasmanSingle Gas Detector for Personal Protection with ATEX Approval for Flammable Gases (Ex), Oxygen (O2) or Toxic Gases (CO, CO2, H2S, ... )

• freely adjustable alarm level / vibration alarm, LED alarm, beeper• comfortable to carry all day long / can be used in Ex areas• protection class: dust- and waterproof IP 65 / 67• LC display with backlight• internal calibration via keypad• data logger function

Air Quality Meter

ITEM NO. ITEM K-Gasman-Cl2 chlorine detector K-Gasman-CO carbon monoxide detector K-Gasman-CO2 carbon dioxide detector, with charger K-Gasman-FL flammablegasesdetector,withchargerK-Gasman-H2 hydrogen detector K-Gasman-H2S hydrogensulfidedetectorK-Gasman-NH3 ammonia detector K-Gasman-NO nitrogen monoxide detector K-Gasman-NO2 nitrogen dioxide detector K-Gasman-O2 oxygen detector K-Gasman-O3 ozone detector K-Gasman-SO2 sulphur dioxide detector OPTIONAL ACCESSORIES K-LADE-G-N 230 V charger K-LADE12V-G-N 12 V vehicle recharger cable K-INT-G-N 230 V charger with data interface K-SW-G-N software for PC K-RS232-G-N RS-232 data cable K-RS232-USB adaptor RS-232 to USB interface K-ASP-G-N hand-operated bellows suction pump (not for O3, Cl2 and NO2) K-CAL-G-N calibration and maintenance (e. g. every 6 months)

Gas types availableModel Gas Meas. range AlarmGasman-CL2 chlorine 0...20 ppm 0.5 ppmGasman-CO carbon monoxide 0 ... 500 ppm 30 ppmGasman-CO2 carbon dioxide 0 ...5 vol % 0.5 u. 1.5 vol %Gasman-FL flammablegases 0...100%UEG 20%UEGGasman-H2 hydrogen 0 ... 2.000 100 ppmGasman-H2S hydrogensulfide 0...100ppm 5ppmGasman-NH3 ammonia 0 ... 100 ppm 25 ppmGasman-NO2 nitrogen dioxide 0 .... 1 ppm 1 ppmGasman-O2 oxygen 0 ...25 vol% 19 u. 23 vol %Gasman-O3 ozone 0 ... 1 ppm 0.1 ppmGasman-SO2 sulphur dioxide 0 ... 10 ppm 1 ppm

143www.pce-instruments.com/english

Approvals:Europe: •ATEX II 2G EEx iad IIC T4

(-20 ... +55 °C)•BASEEFA 03ATEX0193USA & Canada: •Class I Division 1 Instruments. A, B, C, D

Standards / codes:Europe: •EN50014, EN50020, EN50018, 94/9/EC•EN50270, EN 50271, IEC61508USA & Canada:•UL913, CSA22.2, 152

Air Quality Meter

INCLUDESTETRA (model -1,-2,-3,-4 or-5), rechargeable battery, instruction manual (please order charger separately), other gases on requestITEM NO. ITEM K-TETRA-1 2-gas for LEL and O K-TETRA-2 3-gas for LEL, O2 / H2S K-TETRA-3 3-gas for LEL, O2 / CO K-TETRA-4 4-gas for LEL, O2/ CO/ H2S K-TETRA-5 2-gas O2 / O3 K-TETRA-IP internal gas suction pump (not possible for O3) OPTIONAL ACCESSORIES K-TETRA-LS 230 V / 50 Hz charger K-TETRA-ASP suction set (gas suction by means of hand-operated bellows) K-TETRA-INT RS-232 interface for PR, IR adaptor K-TETRA-SW software K-ESS-T-LEL additional sensor LEL K-ESS-T-O2 additional sensor O2 K-ESS-T-H2S additional sensor H2S K-ESS-T-CO additional sensor CO K-CAL-TETRA calibration / maintenance K-C01863 carrying strap

TECHNICAL SPECIFICATIONS (LEL = flammable gases such as methane)Model TETRA-1 TETRA-2 TETRA-3 TETRA-4 TETRA-5Measurement range (LEL, O2) (LEL, O2, H2S) (LEL, CO, O2) (LEL, O2, CO, H2S) (O2, O3)LEL 0 ... 100 % 0 ... 100 % 0 ... 100 % 0 ... 100 % - - -O2 0 ... 25 % 0 ... 25 % 0 ... 25 % 0 ... 25 % 0 ... 25 %O3 - - - - - - - - - - - - 0 ... 100 ppmCO - - - - - - 0 ... 500 ppm 0 ... 500 ppm - - -H2S - - - 0 ... 100 ppm - - - 0 ... 100 ppm - - -Alarm limitsLEL 20 % 20 % 20 % 20 % - - -O2 19.5 and 23.5 % 19.5 and 23.5 % 19.5 and 23.5 % 19.5 and 23.5 % 19.5 & 23.5 %O3 - - - - - - - - - - - - 0.1 ppmCO - - - - - - 30 ppm 30 ppm - - -H2S - - - 5 ppm - - - 5 ppm - - -Sensorlife typical:flammableg.:approx.5years/toxicg.:approx.3years/oxygen:approx.2yearsResponsetime T90=methaneandotherinflammablegases:20s/toxicgases:20s/oxygen:10sAlarm visual:2flashingredandblueLEDs;acoustic:90dB(A)at1mdistance;vibrationDisplay graphical LCD, with backlight, battery level indicator, 128 x 64 pixelsMemory data logger & event recorder (e. g. when limits are exceeded)Interface for PC IR interface Software optional,forconfiguration,calibrationanddataaccessPower supply rechargable lithium ion battery (min. 12 h of continous use, with internal pump min. 8 h)Operating conditions -20 ... +55 °C / 0 ... 99 % RHProtection can be used in ex areas, dust and waterproof, resistant to chemical corrosion, IP 65Dimensions / weight 122 x 128 x 57 mm / 500 g

TETRAMulti-Gas Detector for Professional Use (ATEX II 2G Eex iad IIC T4)

• acoustic alarm: 90 dB (A)• visual alarm: red and blue LED / vibration alarm• single-button operation• sensors are even interchangeable in dangerous areas• internal automatic gas suction pump available for extra charge

TOPseller

144 www.pce-instruments.com/us

TECHNICAL SPECIFICATIONSModel Meas. range Measurement principleGAZEX-UEG 0 ...100 % vol. LEL methane catalytic combust. (pellistor)GAZEX-UEG/Vol.% 0 ... 100 % LEL LEL catalytic comb. (pellistor) 0 ... 100 % vol. vol thermal conductivityGAZEX-ppm/UEG/Vol.% 0 ... 10000 ppm ppm catalytic comb. (pellistor) 0 ... 100 % LEL LEL catalytic comb. (pellistor) 0 ... 100 % vol. vol thermal conductivitySample coll. / method diffusion or hand-operated pump / continuous measurem.Powersupply Li-Ionrech.batt.(charging/oper.time:rech.batt.:≥15h/4.5h)Display / case LCD / ABS and elastomerDimensions / weight 139 x 50 x 28.2 mm / 119 gINCLUDESGasdetectorforuseinexzone,charging/configurationstation,crocodileclip,lithiumbattery, instruction manualITEM ITEM K-GAZEX-UEG gas meter LEL K-GAZEX-UEG/Vol.% gas meter LEL / vol.% K-GAZEX-ppm/UEG/Vol.% gas meter ppm / UEG / vol.% OPTIONAL ACCESSORIES K-0100-050 hand-held suction device K-0100-018 metal case type 1

GAZEXMulti-Scale Gas Detector for Hazardous Areas (ATEX)

• optical / acoustic / vibration alarm• uptothreemeasurementranges(ppm,LEL,VOL)/responsetimeT90≤20s• 2 alarms: 20 % and 40 % LEL• function control - self-diagnostic programme when switched on• operatingconditions-20...+40°C;15...95%RH/protectionIP67(waterproof)• ex protection: Ex CE INERIS 02 ATEX 0060 II 1 G EEx ia IIC T4• norm:EN30079-291:2007;EN50271

Air Quality Meter

TECHNICAL SPECIFICATIONSGas Meas. range AlarmLEL 0 ... 100 % 20 %O2 0 ... 25 % 19.5 and 23.5 %CO 0 ... 500 ppm 30 ppmH2S 0 ... 100 ppm 5 ppmSensor life like Tetra (O2 approx. 3 years) Resp. time like TetraAlarm like Tetra Display graphical LCDMemory logger / event recorder PC Interface IR interfacePower supply rechargeable lithium ion battery for min. 16 hOper. conditions -20 ... +55 °C / 0 ... 99 % RHDimensions / weight 112 x 72 x 49 mm / 270 gINCLUDESTETRA-MINI, rechargeable battery, charger (without PC interface), instruction manualITEM NO. ITEM K-TETRA-MINI 4-in-1 meter with charger (without RS-232 interface) OPTIONAL ACCESSORIES K-TETRA-ML charger with RS-232 interface K-TETRA-MRS RS-232 cable for charger K-TETRA-SW software K-TETRA-ASP suction pump setK-CAL-TETRA calibration / maintenance (e. g. every 6 months) K-TETRA-INT PC interface Tetra K-TETRA-LS charger Tetra

TETRA-MINIMulti-Gas Meter with ATEX Approval

• acoustic alarm 95 dB (A) / visual alarm: LED red and blue• vibration alarm / single-button operation• graphical display / rechargeable battery and charger included• approval: ATEX II 2G EEx iad IIC T4 (Tamb -20 … +55 °C),

BASEEFA 03ATEX0193 EN50014, EN50020, EN50018, 94/9/EC

CO2

www.pce-instruments.com/us150

TECHNICAL SPECIFICATIONSMeas. Range CO2 0 … 5000 ppmAccuracy ±75 ppm +5 % of readingAlarm 1000 ppm standard (adjustable)Temp. range 0 … +50 °CAccuracy ±1 °C (0 … +40 °C),otherw. ±1.5 °CRH range 10 … 90 % RHAccuracy ±5 % RH (+25 °C), or ±7 % RHDisplay CO2 ( 2.3“ / 56.8 mm), temperature / RH (0.8“ / 20.4 mm) Power supply 12 V / 1 AOp. conditions 0 … +50 °C / <80 % RHDimensions approx. 300 x 210 x 50 mmINCLUDESLarge CO2 display, mains adaptor, case, instruction manualITEM NO. ITEM K-PCE-AC 4000 large CO2 display

PCE-AC 4000Large CO2 Display up to 5000 ppm

• display in A4 format• simultaneous indication of CO2, temperature and RH• adjustable acoustic alarm• temperature units °C and °F• status displayed via coloured LED indicators

(green-good / yellow-acceptable / red-bad)

TECHNICAL SPECIFICATIONSMeas. range CO2 0 ... 3000 ppmResolution 1 ppm (at 0 ... 100 ppm) 5 ppm (at 1000 ... 2000 ppm) 10 ppm (at 2000 ... 3000 ppm)Accuracy ±5 % of reading or ±50 ppmTemperature -20 ... +50 °CResolution 0.1 °CAccuracy ±1% or ±1 °CMemory 48 valuesPower supply 4 x 1.5 V AA batteries or mains ad.Op. conditions +5 ... +50 °CDimensions / weight 165 x 80 x 23 mm / 600 gINCLUDESAir quality meter, 4 x 1.5 V AA batteries, mains adaptor, instruction manualITEM NO. ITEM K-PCE-AC 3000 CO2 meter

PCE-AC 3000Indoor Carbon Dioxide Meter

•wide CO2 measurement range up to 3000 ppm•with RJ45 switched output• 24 hours data logger function • adjustable limit value alarm for CO2 • can be reset to factory defaults • acoustic alarm

TECHNICAL SPECIFICATIONSModel IAQ7515 IAQ7525Meas. range CO2 0 ... 5000 ppmAccuracy ±3 % of reading or ±50 ppmTemperature - - - 0 ... +50 °CAccuracy / Resol. - - - ±0.6 °C / 0.1 °CAir humidity - - - 5 ... 95 % RHAccuracy - - - ±3 % / 0.1 % RHMemory - - - 12700 valuesPower supply 4 x 1.5V AA batteriesOp. conditions probe -10 ... +60 °CDimensions probe integrated Ø 19 x 283 mmDim. / weight of device 244 x 84 x 44 mm / 270 gINCLUDES Airqualitymeter,calibrationcertificate,(IAQ7525comes with software & data cable), instruction manualITEM NO. ITEM K-IAQ7515 CO2 meter K-IAQ7525 CO2 meter with memory OPTIONAL ACCESSORIES K-CAL-IAQ-7515 ISOcalibrationcertificateK-CAL-IAQ-7525 ISOcalibrationcertificate

IAQ SeriesIndoor Air Quality Meter

•AVG, MIN / MAX functions•NDIR sensor / measures CO2 in real time (ppm)

further functions of the IAQ7525•manual / continuous storage (intervals 1s ... 1h)• includes LogDat2™ software and connection cable• calculates percentage of fresh air on basis of CO2

•measures humidity, dew point & wet bulb temp.

Air Quality Meter

TOPseller

151www.pce-instruments.com/english

Air Quality Meter

TECHNICAL SPECIFICATIONSMeas. range CO2 0 ... 2000 ppm / NDIR principleAccuracy / resol. 50 ppm ±5 % / 1 ppm (0 ... 100 ppm)Temperature -10 ... +60 °CAccuracy / resol. ±0.6 °C / 0.1 °CAir humidity 5 ... 95 %Accuracy / resol. ±3 % / 0.1 %Display shows all parameters at onceMemory 5300 series of measurement valuesLogdata/rate upto16000;3/10/30s 1/3/10/30min.;1/3/4hPower supply 5V ac mains adaptor / 0.5 ADimensions 120 x 100 x 110 mmINCLUDESData logger CO2 and climate, mains adaptor, data cable, PC software, instruction manualITEM NO. ITEM K-CDL 210 CO2 data loggerNote:

Manual calibration should be done on a clear day outside, e.g. on an exterior window sill where the level

of CO2 is approximately 400 ppm.

CDL 210CO2 & Climate Data Logger

•measures and displays temperature and air humidity• acoustic signal when pre-set CO2 value is exceeded• simultaneous indication of CO2, temperature and

humidity•memory: 5300 series of measurements / USB

interface•wide CO2 measurement range of up to 2000 ppm

RLA 100Gas Detection System to Detect Carbon Dioxide (CO2)

• detects carbon dioxide (CO2)• 2 adjustable alarm limits• 4-digit digital display• continuous visual surveillance possible• potential-free change-over contact• integrated alarm transmitter• can easily be mounted to a wall• three system components

TECHNICAL SPECIFICATIONSGas detectorSample gas carbon dioxide (CO2): 0 ... 50000 ppm (5 %) (vol.), NDIR sensorGas entry by diffusionAlm. contacts 1 potential-free change-over contact to control external devices (NO/ NC)foralarm1;switchingcapacity: 30 V dc / 250 V ac, max. 2 AAlam limits alarm 1: 0.5 / 1 / 1.5 / 2 % alarm 2: 1.5 / 2 / 2.5 / 3 / 3.5 / 4 %Menu items supervision of device connection, calibration, unit switching, alarm 1, 2 and factory settingsDisplay 4-digitdisplayforconcent.inrangeppm; 3digitdisplayforconcent.inrange%; LEDs for operation, Alarm 1, 2 y monitoring of voltage supplySafety Continuous self-surveillance, sensor life- time,unplausible measurement values, EEPROM system, internal data transferPower supply Adaptor 100 ... 240V AC, 50/60 HzCase Plastic, IP 54, splash resistentOp. conditions 0 ... +45 °CDimensions 168 x 125 x 47 mm (without connections)

Control unitPower supply via data cable connected to gas detectorOp. conditions 0 ... +45 °CMenu items Control connection between the PC measuring the gas and the gas alerter Change from °C to°FDisplay 4-digitindicationforcontentinppm; 3-digitindicationforcontentin%; additionalindicationfortemperature; LEDs for operation, alarm 1 and 2 and monitoring of voltage supplyCase aluminium, IP 54, splash proofDimensions 118 x 85 x 34 mm (without connections)INCLUDESGas detection system, instruction manualITEM NO. ITEM K-RLA 100 gas detection systemOPTIONAL ACCESSORIES K-CAL-RLA ISOcalibrationcertificate

www.pce-instruments.com/us152

Air Quality Meter

TECHNICAL SPECIFICATIONSMeas. range 0 ... 1 ppm (O3)Alarm 0.1 ppmResponse time 20 sAcoustic alarm 95 dBA, several alarm tones Visualalarm gashazard=LEDflashingred/blueVibration alarm internal vibration alarm transmitterProt. class case IP 65 / 67Display LCD with backlightPower supply Lithium batteryOp. conditions -20 ... +55 °C / 0 ... 99 % RHDimens. / weight 90 x 48 x 24 mm / 118 gINCLUDESOzone meter, pocket clip, battery, instruction manualITEM NO. ITEM K-Gasman-O3 gas / ozone meterOPTIONAL ACCESSORIES K-CAL-G-N ISOcalibrationcertificateK-SW-G-N software K-RS232-G-N RS-232 data cable K-RS232-USB adaptor RS-232 to USB

Gasman OzonOzone meter for personal use (ATEX)

• Adjustablealarmlevels;vibrationalarm, LED alarm, beeper

•Can take it into Ex zone / internal security•Dust and water resistant IP 65 / 67• LCD screen with backlight• Internal calibration via keypad / datalogger function

TECHNICAL SPECIFICATIONSMeas. range 0 ... 1.00 ppm (O3)Alarm 0.1 ppmResponse time 10 sAcoustic alarm 90 dB (A) at a distance of 1 mVisual alarm extra bright LEDProtection class IP 65Display LCD, with backlightPower supply rechar. Li Ion battery (min. 12 h)Operating conditions -20 ... +55 °C / 0 ... 99 % RHDimensions 122 x 128 x 57 mmWeight 498 gINCLUDESOzone meter, rechar. Li Ion battery, charger, manualITEM NO. ITEM K-TETRA-5-O gas / ozone meterOPTIONAL ACCESSORIES K-CAL-TETRA ISOcalibrationcertificateK-TETRA-SW software K-TETRA-INT interface for PC K-TETRA-ASP suction pump K-TETRA-TRA shoulder and chest carrying strap

Tetra 5Gas Meter for Ozone with ATEX

•ATEX II 2G EEx iad IIC T4• acoustic & visual alarm: 90 dB (A) / red LED

and vibration alarm / case IP 65 protection• 128 x 64 pixels graphical display with backlight• additional sensors for other gases available• can be used in hazardous areas

TECHNICAL SPECIFICATIONSMeas. range 0 ... 5 ppmResolution 0.01 ppmAccuracy <±2 %Sensor electrochemical sensorResponse time <30 sCalibration automatic self-calibrationMemory up to 500 sets of dataInterface USBPower supply rech. Li-Ion batt. (3.7 V / 1200 mAh) ac adaptor 100 ... 240 V to 5 V dc / 1 AOp. conditions +5 ... +40 °C / <90 % RHContin. operation 6 h with batteriesDimens. / weight 80 x 36 x 150 mm / approx. 200 gINCLUDESMeas. device, rechargeab. (Li-Ion) batt., 230 V charger, USB data cable, softw., calibration cert., manualITEM NO. ITEM K-HFX205 formaldehyde measuring deviceOPTIONAL ACCESSORIES K- measurement range up to 25 ppmK-RHT200 humidity / temperature sensor

HFX205Measuring Device for Formaldehyde

• short response time / real-time display•manual and automatic data storage• high-speed USB• software for online data transfer• no warm-up time necessary• automatic backlight• self-calibration / limit value alarm