Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
HYDRAULIC
SHUTOFF VALVE
Ca n’ Alzina 114A · 08202 Sabadell
Barcelona · España
Tel.: +34 93 307 33 80
www.marlia-ing.com
The valves of the 5500CE series have been designed as quick cutting systems to facilitate emergency closure in storage tanks and LPG or NH3 transport and storage
lines.
The valves can be mounted directly in the inlet and outlet connections of the storage tanks and in line with the container reel of the 6000CE series, the installation can be
either horizontal or vertical.
These valves are not designed as a primary cutting system despite having a completely sealed seat.
The valve at rest is closed by the pressure exerted by the stainless steel spring and by applying hydraulic pressure it remains open. When the pressure is removed, the valve
automatically closes.
These valves have a thermal fuse connected to the hydraulic oil inlet that in case of an external fire melts at an approximate temperature of 75ºC which loses the pressure
and causes its immediate closure.
The valves are built in carbon steel A352 Gr LCB suitable to work at temperatures up
to -45 ° C, the cylinder has an internal sleeve to facilitate the displacement of the
piston; the spring is made of stainless steel and the joints in Viton.
Hydraulic valve Container reel
Due to the size of the valves, when they are installed in a line, they must first be placed in a container reel of the 6000CE series in order to maintain the flow with a
minimum loss of load.
The container reel is made of carbon steel and can work at temperatures down to -25ºC and a pressure of 25Barg.
As an option, there is an intermediate flange for the installation in line, as well as in the tank, which is placed between the hydraulic valve and the reel or the tank,
which allows the disconnection of the pipe that precedes the valve without needing to depressurize the other side of the line or the tank.
8
9
7
6 5
4
3
10 11
2 12 13 14
1
F
G
E
7 D
5 8
4 9
10
11
3 12 13
2 14
1
G F
E
D
SIZE MODEL Nº OF DRILLS
DRILLS DIAMETER
DRILL CIRCLE
D E F G H J K L
2” 5502 8 19 127 165 107 107 91 22 40 238 33
3” 5503 8 22 168 210 127 146 110 30 37 243 33
4” 5504 8 22 200 254 157 178 148 32 57 267 32
6” 5506 12 22 270 318 216 248 199 37 52 302 42
L
K
H
J
K
L
J
H
6
REF DESCRIPTION MATERIAL
1 BASE STEEL FOUNDRY
2 CYLINDER BASE STEEL
3 CYLINDER STEEL
4 SPRING SS-304
5 RING JOINT AS “U” STEEL
6 JOINT AS “U” NITRILE
7 SEALING RING F.S.
8 PISTON BOLT STEEL
9 PISTON STEEL
10 PISTON SEAT P.T.F.E.
11 SEALING RING SYNTHETIC RUBBER
12 SCREW SS-304
13 SEALING SEAT STEEL
14 SEAT NITRILE
REF DESCRIPTION MATERIAL
1 BASE STEEL FOUNDRY
2 ALLEN SCREW 4” M-8/6” M-10
3 GUIDE DISC STEEL
4 JOINT AS “U” VITON
5 SEALING RING VITON
6 PISTON BOLT STEEL
7 PISTON STEEL
8 RING JOINT AS “U” STEEL
9 SPRING SS-304
10 CYLINDER STEEL
11 PISTON SEAT P.T.F.E.
12 SCREW SS-304
13 SEALING SEAT STEEL
14 SEAT VITON
INSTALLATION FORMS
Tank mounting with an intermediate flange Tank mounting without an intermediate flange
REEL MOUNTING IN LINE
In line installation of the CE55 valve along with a COH container reel
VALVULA SERIE 55
MONTADA EN LINEA MONTADA EN TANQUE
VALVE SERIES 55
MOUNTED IN LINE MONTADA IN STORAGE TANKS
600
500
400
300
200
100 90 80 70
60
50
40
30
20
10
50 60 70 80 90 100
200
300
400 500
1000
2000
3000 4000 5000
FLOW RATE [ Lt/Min ] WATER
Type of hydraulic shutoff valve
Category II
Test pressure: 30 bar
Work pressure: 20 bar
Work temperature -20ºC / +85ºC / Available to -45 ºC Under request
Materials: Carbon steel body A352 Gr LCB, internal inox.
Type of Products: LPG, ammonia
CE / PED Certificate: Calculation Method Tested 5 times the maximum working pressure 100 bar
Ca n’ Alzina 114A ·08202 Sabadell
(BARCELONA) · España Tel.: +34 933 073 380
[email protected] www.marlia-ing.com
PR
ESSU
RE
[ m
bar
]
GRAFICO DE CAPACIDAD