OVERVIEW

The Perma-Lach® PHL hydraulic-set retrievable packer is a high performance, straight shear release packer. The PHL packer has no hold-down buttons, helping eliminate potential leakage from the O-rings.

The PHL packer’s optimized OD speeds the run-in process. Setting is achieved by running the packer in on tubing, dropping a ball, or setting a slickline plug and applying pressure. No tubing manipulation is required. To release, pull straight up on the production tubing. Setting pressures can be field adjusted, allowing multiple packers to be run and set during a single trip. Tubing can also be spaced out before the packer is set.

APPLICATIONS

» Single or multi-packer production completions » Can be used as the lower packer in dual completions » Can be set at predetermined pressures or selectively set in multi-zone completions

» Up to 7,500 psi (51.7 MPa) differential pressure typical

FEATURES

» Optimized OD » Triple-seal multi-durometer elements » Shear screws allow operators to vary the setting pressure and release force » Release mechanism protected from premature shearing » No mandrel movement when setting

BENEFITS

» Setting pressures can be adjusted in the field » No tubing manipulation required for setting » Requires only a straight pull to release » Multiple packers can be run and set in one trip » High performance at low cost » Tubing can be spaced out before the packer is set

Hydraulic-Set Perma-Lach® PHL Packer

HA

L590

89

LEVEL 1 CAPABILITY | Level 2 Capability (if applicable)COMPLETION SOLUTIONS | Production Packers

LEVEL 1 CAPABILITY | Level 2 Capability (if applicable)COMPLETION SOLUTIONS | Production Packers

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H012367 06/17 © 2017 Halliburton. All Rights Reserved.

For more information, contact your local Halliburton representative or visit us on the web at www.halliburton.com

Casing Size Casing Weight Tubing Size Packer OD

in. mm lb/ft kg/m in. mm in. mm

4 1/2 114.30 9.5-13.5 14.14-20.09 2.38 60.33 3.76 96.16

5 1/2 139.70

13-17 19.35-25.30 2.38 60.33 4.70 119.38

13-17 19.35-25.30 2.88 73.03 4.70 119.38

17-23 25.30-34.22 2.38 60.33 4.52 114.30

17-23 25.30-34.22 2.88 73.03 4.52 114.30

6 5/8 168.28 24-28 35.72-41.67 3.50 88.90 5.61 142.49

7 177.80

23-29 34.22-43.162.88 73.03 5.98 151.89

3.50 88.90 5.98 151.89

29-35 43.16-52.092.88 73.03 5.83 147.83

3.50 88.90 5.83 147.83

7 5/8 193.68 29.7-39 44.20-58.042.88 73.03 6.47 164.29

3.50 88.90 6.47 164.29

9 5/8 244.48

40-47 59.53-69.943.50 88.90 8.45 214.68

4.50 114.30 8.45 214.68

47-53.5 64.74-79.623.50 88.90 8.23 209.12

4.50 114.30 8.23 209.12

Hydraulic-Set Perma-Lach® PHL Packer