Hydraulic Power forall Industrial · PDF fileHydraulic Power forall Industrial Applications ... wheels, and later water pumps for ... quality, price and

Hydraulic Power for all IndustrialApplications

®

®H

ydraulic Pow

er for all Industrial Applications

®

E321e

A UNIT OF APPLIED POWER

E321e

Introduction

The World of Enerpac ................................................... 4

Cylinders (Hydraulic) 6-51

Introduction ...................................................................... 6-7RC-Series, Single-Acting Cylinders ........... 8-11RC-Series, Cylinder Accessories ...................... 12RCA-Series,

Single-Acting Aluminium Cylinders ............ 13CLP-Series,

Single-Acting Pancake Cylinders ........ 14-15RSM-Series,

Single-Acting Flat-Jac Cylinders .......... 16-17RCS-Series, Single-Acting

Low Height Cylinders .................................... 16-17BRC-Series, Single-Acting

Pull Cylinders ...................................................... 18-19BRP-Series, Single-Acting

Pull Cylinders ...................................................... 18-19RCH-Series, Single-Acting

Hollow Plunger Cylinders .......................... 20-21RRH-Series, Double-Acting

Hollow Plunger Cylinders .......................... 22-23BRD-Series, Double-Acting

Precision Cylinders ......................................... 24-25RR-Series, Double-Acting Cylinders ...... 26-29CLS-Series, Single-Acting

High Tonnage Cylinders .............................. 30-33CLR-Series, Double-Acting

High Tonnage Cylinders .............................. 34-37CLL-Series, Single-Acting

Lock Nut Cylinders ......................................... 38-41Synchronous Lift System ................................ 42-43BLS-Series, Double-Acting

Stage Lift Cylinders ........................................ 44-45Strand Lift System ................................................ 46-47JHA and JTA-Series, Aluminium Jacks ........ 48JH-Series, Steel Jacks .............................................. 49SC-Series, Cylinder-Pump Sets ................. 50-51

Pumps (Hydraulic) 52-92

Introduction ................................................................ 52-53P-Series, Lightweight Hand Pumps ........ 54-55P-Series, Steel Hand Pumps ........................ 56-57P- and PL-Series, Low Pressure

High Flow Hand Pumps ............................... 58-59P- and 11-Series,

Ultra-High Pressure Hand Pumps ...... 60-61PB-Series, WalkPac

Battery Operated Pumps ........................... 62-63PU-Series, Economy Electric Pumps .... 64-65PU-Series, Titan Electric Pumps ............... 66-69PE-Series, Submerged Electric Pumps 70-73PE-Series, Hushh Electric Pumps............. 74-79PP-Series, Electric Pumps

(8000- and 9000-Series) .............................. 80-81PAH-Series, Air Hydraulic Pumps ............ 82-83PA-Series, Turbo Air Pumps ......................... 84-85PA and 10-Series,

Air Hydraulic Pumps ...................................... 86-87

PAM-2000-Series, Air Hydraulic Pumps ...................................... 88-89

PGM-Series, Atlas Gasoline Powered Pumps ........... 90-91

EGM-Series, Gasoline Pumps ............................. 92

Yellow Pages (Information Section) 93-104

Introduction and Standards ................................... 93Safety Instructions ................................................ 94-95Cylinder-Pump Matching and Selection ............................................ 96Hydraulic Work Sheet ................................................ 97Basic Hydraulic System Set-ups .............. 98-99Basic Hydraulics .............................................. 100-101Conversion Tables ..................................................... 102Cylinder Speed Charts ........................................... 103Valve Information ........................................................ 104

System Components 105-118

Introduction ..................................................................... 105High Pressure Hoses .................................... 106-107Hydraulic Couplers ......................................... 108-109Hydraulic Oil ................................................................... 110Manifolds .......................................................................... 110Fittings ................................................................................ 111GP and GF-Series,

Hydraulic Force Gauges ....................... 112-113G, SSG and H-Series,

Hydraulic Pressure Gauges ................ 114-115T-Series, Test System Gauges ......................... 116BDG-Series, Digital Hydraulic Gauges ...... 117Gauge Accessories ................................................... 118

Valves 119-125

Introduction ..................................................................... 1193-Way Directional Control Valves ........ 120-1214-Way Directional Control Valves ........ 122-123Pressure and Flow Control Valves ..... 124-125

Hydraulic Presses 126-139

Introduction .......................................................... 126-127B-Series, H-Frame Presses ..................... 128-131SOP-Series, Bench and

Workshop Presses ...................................... 132-133BPR-Series, Roll Frame Presses ......... 134-135C-Clamps and Arbor Presses ................ 136-137Press Accessories ..................................................... 138Load Cells and Tension Meters ....................... 139

Pullers, Manual and Hydraulic 140-155

Introduction ........................................................ 140-141MP-Series, Mechanical Pullers ........... 142-143BHP-Series, Hydraulic Puller Sets ... 144-147BMZ-Series,

Hydraulic Master Puller Sets ............ 148-149EP, EPP and EPX-Series,

Mechanical Posi-Lock Pullers ........ 150-153EPH-Series,

Hydraulic Posi-Lock Pullers ............. 154-155

Hydraulic Tools 156-178

Introduction ........................................................ 156-157ST-Series, Tool and Pump Sets .......... 158-159MS-Series, Maintenance Sets ............. 160-163SP-Series,

35 Ton Hydraulic Punch ...................... 164-165SP-Series,

50 Ton Hydraulic Punch ...................... 166-167A and WR-Series,

Wedgies and Spread Cylinders ................ 168SOH-Series, Hydraulic Machine Lifts ....... 169ER-Series,

Heavy Duty Load Skates .................... 170-171WHC-Series,

Self Contained Hydraulic Cutters ........... 172WMC-Series, Hydraulic Cutter Heads ..... 173NC-Series, Hydraulic Nut Splitters ............. 174FS-Series,

Hydraulic Flange Spreaders ......................... 175STB-Series, Pipe Benders ...................... 176-177CM-Series, Material Storage Cases .......... 178

Model Number Index 179

Table of Contents

2

®

Hydraulic Technology Worldwide

World Wide Catalog CoverageEnerpac Catalogs are printed in many languages. If yourrequirements call for product use in a different country, please send your request to the applicable country listedon the back cover of this catalog – the Enerpac catalogof the country serving your specific market area will be forwarded promptly.

For your Safety and BasicHydraulic Information, see ournew ‘Yellow Pages’.

All information in this catalog can be changed due to product improvements wit-hout prior notice.

© Copyright 1997, Applied Power Inc. All rights reserved. Any copying or other useof material in this catalog (text, illustrations,drawings, photo’s) without express writtenconsent is prohibited.

H

Page: 93

3

Model Number Index Section Index

®

H HPage(s) H Page(s) H Page(s) H Page(s) H

CylindersPage 6-51

PumpsPage 52-92

SystemComponents

Page 105-118

Valves Page 119-125

PressesPage 126-139

PullersPage 140-155

ToolsPage 156-178

AA . . . 12, 109, 110

136, 162, 168AD . . . . . . . . . . . . . 138AH . . . . . . . . . . . . . 109AM . . . . . . . . . . . . 110AR . . . . . . . . . . . . . 109AW . . . . . . . . . . . . . . 12

BB . . . . . . . . . . . . . . . 176BAD . . . . . . . . . . . . . 25BAP . . . . . . . . . . . 128BC . . . . . . . . . . . . . . . 62BD- . . . . . . . . . . . . 117BEH . . . . . . . . . . . 128BEP . . . . . . . . . . . 128BFZ . . . . . . . . . . . 111BHP . . . . . . . . . . . 144BLS . . . . . . . . . . . . . 44BMP . . . . . . . . . . 128BMZ . . . . . . . . . . 148BP . . . . . . . . . . . . . . . 62BPR . . . . . . . . . . . 134BRC . . . . . . . . . . . . 18BRD . . . . . . . . . . . . 24BRP . . . . . . . . . . . . . 18BV . . . . . . 120, 122

CC . . . . . . . . . . . . . . . 108CAT . . . . . . . 12, 17CD . . . . . . . . . . . . . 109CH . . . . . . . . . . . . . 109CLL . . . . . . . . . . . . . 38CLP . . . . . . . . . . . . . 14CLR . . . . . . . . . . . . . 34CLS . . . . . . . . . . . . . 30CM . . . . . . . . . . . . 178CR . . . . . . . . . . . . . 109

DDG . . . . . . . . . . . . . 117

EEAM . . . . . . . . . . . . 87EGM . . . . . . . . . . . . 92ELP . . . . . . . . . . . 170EMB . . . . . . . . . . 170EP. . . 150,153,155EPH . . . . . . . . . . . 154EPH- . . . . . . . . . 155

EPP . . . . . . . . . . . 153EPPMI . . . . . . . 150EPX . . . . . . . . . . . 153ER . . . . . . . . . . . . . 170ERH . . . . . . . . . . . 170ERS . . . . . . . . . . . 170ES . . . . . . . . . . . . . 170

FF . 105, 109, 175FH . . . . . . . . . . . . . 109FM . . . . . . . . . . . . . 118FR . . . . . . . . . . . . . 109FS . . . . . . . . . . . . . . 175FZ . . . . . . . . . . . . . . 111

GG . . . . . . . . . . . . . . . 114GA . . . . . . . . . . . . . 118GF . . . . . . . . . . . . . 112GP . . . . . . . . . . . . . 112

HH . . . . . . . . 106, 112

114HA . . . . . . . . . . . . . 106HB . . . . . . . . . . . . . 106HC . . . . . . . . . . . . . 106HF . . . . . . . . . . . . . 110HP . . . . . . . . . 21, 23

IIC . . . . . . . . . . . . . . 122IPK . . . . . . . . . . . . 138IPL . . . . . . . . . . . . . 138

JJBI . . . . . . . . . . . . . . 12JH . . . . . . . . . . . . . . . 49JHA . . . . . . . . . . . . . 48JHL . . . . . . . . . . . . . 49JTA . . . . . . . . . . . . . 48

LLH . . . . . . . . . . . . . 139

MMP . . . . . . . . . . . . . 142MPA . . . . . . . . . . 142MPL . . . . . . . . . . 142MPP . . . . . . . . . . 142MPR . . . . . . . . . . 142

MS2- . . . . . . . . . 160MSP . . . . . . . . . . 164MZ . . . . . . . . . . . . . 162

NNC . . . . . . . . . . . . . 174NV . . . . . . . . . . . . . 118

PP . . . . . . 54, 56, 60PA . . . . . . . . . . . . . . . 86PAH . . . . . . . . . . . . . 82P-AL . . . . . . . . . . . . 55PAM . . 84, 87,88PAN . . . . . . . . . . . . . 88PAT . . . . . . . . . . . . . 84PBM . . . . . . . . . . . . 62PBR . . . . . . . . . . . . . 62PC . . . . 54, 58, 78PD . . . . . . . . . . . . . 117PED . . . . . . . 70, 74PEJ . . . . . . . . . . . . . 70PEM . . . . . . . 70, 74PEN . . . . . . . . . . . . . 74PER . . . . . . . 70, 74PES . . . . . . . 70, 74PFC . . . . . . . . . . . . . 78PGM . . . . . . . . . . . . 90PK . . . . . . . . . . . . . 138PL . . . . . . . . . . . . . . . 58PMB . . . . . . . . . . 138PPH . . . . . . . . . . . . . 78PPK . . . . . . . . . . . . . 78PPN . . . . . . . . . . . . . 80PUD . . . . . . . 64, 66PUF . . . . . . . . . . . . . 66PUJ . . . . . . . 64, 66PUM . . . . . . . . . . . . 66PUR . . . . . . . . . . . . . 66

RRB . . . . . . . . . . . . . . . 12RC . . . . . . . . . . . . . . . . . 8RCA . . . . . . . . . . . . 13RCH . . . . . . . . . . . . 20RCS . . . . . . . . . . . . . 16REB . . . . . . . . . . . . . 12REP . . . . . . . . . . . . . 12RFL . . . . . . . . . . . . . 88RPC . . . . . . . . . . . . . 62RR . . . . . . . . . . . . . . . 26RRH . . . . . . . . . . . . 22

RSM . . . . . . . . . . . . 16

SSBD . . . . . . . . . . . 164SCH . . . . . . . . . . . . . 50SCL . . . . . . . . . . . . . 50SCP . . . . . . . . . . . . . 50SCR . . . . . . . . . . . . . 50SD . . . . . . 164, 166SDB . . . . . . . . . . . 166SL . . . . . . . . . . . . . . . . 42SOH . . . . . . . . . . 169SOP . . . . . . . . . . . 132SP . . . . . . 164, 166SPD . . . . . . . . . . . 164SSG . . . . . . . . . . . 114ST . . . . . . . . . . . . . . . 46STB . . . . 176, 177STC . . . . . . . . . . . 158STF . . . . . . . . . . . . 158STN . . . . . . . . . . . 158STP . . . . . . . . . . . 158

TT . . . . . . . . . . . . . . . . 116TM . . . . . . . . . . . . . 139

VV . . . . . . . . 118, 124VA . . . . . . . . . . . . . . . 87VC . . . . . . 120, 122VM . . . . . 120, 122

WWCB . . . 172, 173WFS . . . . . . . . . . . . 62WHC . . . . . . . . . . 172WHR . . . . . . . . . . 172WMC . . . . . . . . . 173WR . . . . . . . . . . . . 168

ZZ . . . . . . . . 109, 176

2500 . . . . . . . . . . 1144000 . . . . . . . . . . 11411- . . . . . . . . . . . . . . . 6041- . . . . . . . . . . . . . . . 6143- . . . . . . . 61, 11645- . . . . . . . . . . . . . . . 6172- . . . . . . . . . . . . . . . 6083- . . . . . . . 61, 116

Applied Power, founded in 1910,originally supplied hand grindingwheels, and later water pumps forthe Ford Model T motor car.Subsequently, Applied Powerbecame involved with high pressurehydraulics technology, which is thebasis of its present Enerpac andPower-Packer businesses. AppliedPower is now a large and diversegroup, consisting of six companies,each a leader in its own field.

Enerpac manufactures anddistributes high force hydraulic andother tools on a global basis for themanufacturing and constructionindustries, for production,maintenance and repair.

GB Electrical provides a wide arrayof electrical tools to the retail andwholesale electrical distributionmarkets, primarily in North America.

Power-Packer is an expert inhydraulic positioning systems forthe automotive industry. Its convertible top actuators,suspension systems and rollstabilizer systems can be found inall major car makes.

Barry Controls specializes in noiseand vibration control for the aviationindustry worldwide.

Apitech’s expertise is in digitallycontrolled valves, the keycomponents in electro-hydraulicsystems.

Wright Line develops office andlaboratory technical furnituresystems that help create moreefficient working environments.

The World

4

LLifting, pushing, pulling, bending, spreading, cutting,

lowering, pressing, punching . . . that is the real world of

Enerpac. Providing the professionals with hydraulic tools to

work with and be profitable.

Apart from their very attractive color, Enerpac products have

one more thing in common; they are all Expert Designed.

What does that mean? Being the first company worldwide

with high pressure hydraulics, Enerpac had to learn by

experience. Nothing was taken for granted since there were

no established benchmarks. Every new project has been a

learning process. Building experience by working hands-on

with newly developed products. Adapting our ideas to

developing tailor-made solutions and services for the young

industrialized world.

Enerpac is grateful and proud of

the way it has become the

recognized global market

leader in high pressure

hydraulics.

Today there are new

technologies to work

with, to learn from and

to understand and apply.

Our customers can always be

assured that an Enerpac high

pressure hydraulic cylinder, tool

or pump is Expert Designed.

It will perform superbly for the

job it was designed for,

at all times.

Logistics ExcellenceMaintaining service excellence in

the changing world of moderndistribution is Enerpac’s mission.

This demands the highestexpertise in logistics. Expertise

reflected in the way we serve ourthousands of distributors

worldwide, through our extensiverange of products.

A tradition of InnovationBeing the market leader means constantly findingnew solutions to better meet the challenges ofindustry. Enerpac’s list of innovations in its field issecond to none - from Golden Ring bearings (forlonger cylinder life) to Genesis Technology (for higher pump productivity), from WalkPac™

and composite hand pumps (for total portability) to the Turbo Air pump (for increased efficiency and durability).

of EnerpacTotal QualityEvery single product wemake is individually testedto the most exactingstandards. Only in this way can weguarantee to meet thequality, price andperformance requirementsof the markets we servearound the globe.

ISO-9001 CERTIFICATED FIRM

5

10 Good Reasons to10 Work with Enerpac

• Expert Design• Reliability• Service Excellence• Worldwide Experience• Application Support• Availability• Quality• Value• Innovative Products• Global Vision

Enerpac Hydraulic Cylinders ®


N

A

N

P

W

B

Z1

IZ

X

F

WD

K

E H

X

QF1

3/8"-

18NPT

K

F

A

J

B

E

HARDENED SADDLE

prevents plungerfrom mushroomingand jamming in thetop bearing. Snap-in design.

CHROME PLATED

PLUNGER

resists wear andrust.

PLUNGER WIPER

reduces contamination,extending cylinder life.

GOLDEN RING

absorbs eccentricloading without galling cylinder parts.

PLUNGER RETURN

SPRING

enables fast plungerretraction on single-acting cylinders.

ENERPAC hydraulic cylinders are available in over

100 different configurations.

Whatever the industrial application is – lifting, pushing,

pulling, bending, holding... whatever the capacity, size,

stroke or model the industry needs – single- or double-

acting, solid or hollow plunger or spread type – there is an

Enerpac cylinder to fit the application.

Most Enerpac cylinders are designed to ANSI B30.1.

Golden Ring Design

The exclusive GoldenRing Design is a unique bearing designwhich absorbs eccentric load stresses toprotect your cylinder against abrasion,over-extending or plunger blow-outs andjamming or top-end mushrooming. As a result, Golden Ring cylinders givelong, trouble-free operation.

GOLDEN RING

absorbs eccentricloading without galling cylinder parts.

6

All ton values specified in thiscatalog are metric tonnes andare for cylinder classidentification only. Please

refer to the kN data for calculations.

Not

e: T

he c

ut-a

way

dra

win

g is

rep

rese

ntat

ive

of ty

pic

al c

ylin

der

con

stru

ctio

n, a

nd m

ay n

ot re

pre

sent

all

cylin

der

s in

this

sec

tion.

7®

RC

RCA

CLPRSMRCS

BRCBRP

RCH

RRH

BRD

RR

CLS

CLR

JHAJTAJH/JHL

SC

Cylinder Section Overview

5 -95

30-50

5-520

2,5-50

13-145

4 - 23

10 - 520

50-1000

100-1000

50-1000

N/A

1,5-150

5-95

(45-933)

(292-498)

(45-5114)

(24-505)

(125-1429)

(35-222)

(101-5108)

(496-10260)

(929-10265)

(496-10260)

(13-1335)

(45-931)

16-362

50-152

6-62

63 -155

8- 258

28- 260

57-1219

50 -300

50-300

50-300

N/A

76 -508

38-362

General Purpose Cylinders,Single-Acting(incl. accessories)

Aluminium Cylinders,Single-Acting

Pancake and Low Height Cylinders, Single-Acting

Pull Cylinders, Single-Acting

Hollow Plunger Cylinders Single- and Double-Acting

Precision Production Cylinders,Double-Acting(incl. mounting attachments)

Long Stroke Cylinders, Double-Acting

High Tonnage Cylinders,Single-Acting,Corrosion Protected

High Tonnage Cylinders,Double-Acting

High Tonnage Cylinders, Single-Acting with Mechanical Locknut, Corrosion Protected

Synchronous Lift SystemsStage Lift SystemsStrand Lift Systems

Aluminium JacksSteel Jacks

Cylinder - Pump Sets

8 E

13 E

14 E

16 E

18 E

20 E

22 E

24 E

26 E

30 E

34 E

38 E

42 E

48 E

50 E

Capacityton (kN)

Stroke Range (mm)

Cylinder type and functions Series Page

CLL

SLBLSST

RC-Series, Single-Acting Cylinders

8

®


H Shown from left to right: RC-506, RC-50, RC-2510, RC-154, RC-10010, RC-55, RC-1010

H RC cylinder mounting attachments greatlyextend the application possibilities (availablefor 5, 10,15 and 25 ton cylinders).

H Stage lifting set up in Greece, where assembled pipes, 25 meters in length,were stage lifted with six RC-2514 cylinders.

The IndustryStandard GeneralPurpose Cylinder

Saddles

All RC cylinders are equipped with hardenedremovable grooved saddles.For tilt and flat saddles, see

the RC-Series accessory page.

Page: 12

Base Plates

To ensure the stability of cylinders for lifting appli-cations, base plates are available for 10, 25

and 50 ton RC cylinders.

Page: 12

Specialty Attachments

For solving all kinds of appli-cation problems, specialtyattachments are available for5, 10 and 25 ton RC cylinders.

Page: 162

• Collar threads, plunger threads and base mountingholes enable easy fixturing (on most models)

• Designed for use in all positions • Removable strap handles for unobstructed fixturing

(RC-5013, RC-7513 and both 95 ton models) • High strength alloy steel for durability• Nickel plating available on most models (contact

Enerpac for details)• Heavy duty return springs• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending

cylinder life

9®

H QUICK SELECTION CHARTFor complete technical information see next page.

Single-Acting, General Purpose Cylinders

6,56,56,56,56,56,514,514,514,514,514,514,514,514,520,320,320,320,320,320,320,320,333,233,233,233,233,233,233,233,242,171,271,271,271,2102,6102,6133,3133,3

162576

1271772322654

1051562032573043562551

1011522032543053562650

10215821026131136220951

101159337156333168260

4111016521527332389

121171247298349400450124149200271322373423474139165215273323374425476387176227282460285492357449

5(45)

10(101)

15(142)

25 (232)

30 (295)

50(498)

75(718)

95(933)

CylinderEffective

Area

(cm2)

CylinderCapacity

ton(kN)

Stroke

(mm)

CollapsedHeight

(mm)

ModelNumber

1016508311515138781522262943734415165110420530841151661972386166339525697867

10331202880362719

113123991601341722393466

OilCapacity

(cm3)

RC-50**RC-51RC-53RC-55*RC-57RC-59RC-101RC-102*RC-104RC-106*RC-108RC-1010*RC-1012RC-1014RC-151RC-152RC-154*RC-156*RC-158RC-1510RC-1512RC-1514RC-251RC-252*RC-254*RC-256*RC-258RC-2510RC-2512RC-2514*RC-308RC-502RC-504RC-506*RC-5013RC-756RC-7513RC-1006*RC-10010

1,01,01,51,92,42,81,82,33,34,45,46,46,88,23,34,15,06,88,29,5

10,911,85,96,48,2

10,012,214,116,317,718,115,019,123,137,629,559,059,072,6

Weight

(kg)

* Available as set, see note on this page.** RC-50 cylinder has non removable grooved saddle and no collar thread.

Golden Ring Design

Enerpac RC-Cylindersincorporate the Golden Ring Design, forlong, trouble-free performance.

RCSeries

Capacity:

5-95 tonStroke:

16-362 mmMaximum Operating Pressure:

700 bar

Speed Chart

See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ todetermine your approximatecylinder speed.

Page: 103

Gauges

Minimize the risk of overloading and ensurelong, dependable servicefrom your equipment. Refer

to the System Components Section for a full range of gauges.

Page: 105

Hoses

Enerpac offers a completeline of high quality hydraulichoses. To ensure the integrity of

your system, specify only Enerpachydraulic hoses.

Page: 106

Pump and Cylinder Sets

All cylinders markedwith an * are available

as sets (cylinder, gauge,couplers, hose and pump) for your ordering convenience.

Page: 50

10

®



RC-Series, Single-Acting Cylinders

3/8"-18NPT

V

U

LM

D

H

E

A

F

B

D1

Extended Height

B(mm)

F For full features see previous page.

162576

1271772322654

1051562032573043562551

1011522032543053562650

10215821026131136220951

101159337156333168260

6,56,56,56,56,56,5

14,514,514,514,514,514,514,514,520,320,320,320,320,320,320,320,333,233,233,233,233,233,233,233,242,171,271,271,271,2

102,6102,6133,3133,3

4111016521527332389

121171247298349400450124149200271322373423474139165215273323374425476387176227282460285492357449

5(45)

10(101)

15(142)

25 (232)

30 (295)

50(498)

75(718)

95(933)

Stroke

(mm)

CylinderCapacity

ton(kN)

CylinderEffective

Area

(cm2)

CollapsedHeight

A(mm)

ModelNumber

10165083

1151513878

15222629437344151651

10420530841151661972386

166339525697867

10331202880362719

113123991601341722393466

Oil Capacity

(cm3)

57135241342450555115175276403501606704806149200301423525627728830165215317431533635736838596227328441797441825525709

58***3838383838575757575757575769696969696969698585858585858585

101127127127127146146177177

OutsideDia.

D(mm)

H

W

X

Z

K

A

E

B

O

P

U1

P

O

J

F

V3/8"-18NPT

DU

RC-50

RC-101 only(U1 = 19 mm)

RC-1006 and RC-10010 models

RC-51 to RC-7513 models

* Available as set, see note on this page.** RC-50 cylinder has non removable grooved saddle and no collar thread.*** D1 = 41 mm, L = 20 mm, M = 25 mm.




Page: 50

11®


Single-Acting, General Purpose Cylinders

28,728,728,728,728,728,742,942,942,942,942,942,942,942,950,850,850,850,850,850,850,850,865,065,065,065,065,065,065,065,073,295,295,295,295,2

114,3114,3130,3130,3

25,425,425,425,425,425,438,138,138,138,138,138,138,138,141,441,441,441,441,441,441,441,457,257,257,257,257,257,257,257,257,279,579,579,579,595,295,2

104,9104,9

191919191919191919191919191919191925252525252525252525252525573333353530304141

**2525252525–

3535353535353538383838383838385050505050505050507171717171717171

**14141416166191919191919192525252525252525252525252525252525————————

1,01,01,51,92,42,81,82,33,34,45,46,46,88,23,34,15,06,88,29,5

10,911,85,96,48,2

10,012,214,116,317,718,115,019,123,137,629,559,059,072,6

Weight

(kg)

**66666–66666669999999910101010101010101022225522

**13/4" - 163/4" - 163/4" - 163/4" - 163/4" - 16

#10 - 24UN

1" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 8

11/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 16

————————

5,6 mm1/4"- 20UN

1/4"- 20UN

1/4"- 20UN

1/4"- 20UN

1/4"- 20UN

5/16"- 18UN

5/16"- 18UN

5/16"- 18UN

5/16"- 18UN

5/16"- 18UN

5/16"- 18UN

5/16"- 18UN

5/16"- 18UN

3/8"- 16UN

3/8"- 16UN

3/8"- 16UN

3/8"- 16UN

3/8"- 16UN

3/8"- 16UN

3/8"- 16UN

3/8"- 16UN

1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

—1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

1/2"- 13UN

——

3/4"- 10UN

3/4"- 10UN

ModelNumber

—2828282828262826282628262630303030303030304949494949494949495555555544444444

—1414141414121212121212121212121212121212121919191919191919—19191919——2525

282525252525393939393939393947474747474747475858585858585858—95959595——

139139

—11/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1621/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1423/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1635/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 12

5" - 125" - 125" - 125" - 12

53/4" - 1253/4" - 1267/8"- 1267/8" - 12

RCSeries

Capacity:

5-95 tonStroke:


700 bar

Couplers Included!

CR-400 couplers included on all models.Fits all HC-Serieshoses.

CylinderBore Dia.

E(mm)

PlungerDia.

F(mm)

Base toAdv. Port

H(mm)

SaddleDia.

J(mm)

Plunger Thread Length

P(mm)

Saddle Protr.

from Plgr. K

(mm)

PlungerInternal Thread

O

Base Mounting Holes CollarThread

W

CollarThreadLength

X(mm)

Thread

V

Thd. Depth

Z(mm)

BoltCircle

U(mm)

12

®


See our‘YellowPages’

for applicationinformation on these acces-sories.

CD

E H

F

G

AB

B

E

D G

F

AH

DC

B

E C

A

B

E

GI

D

F

A

C

H

Grooved

Base Plate Dimensions (mm)

Tilt

For usewith

Cylinder Capacity

ton (kN)

RC-Series, Cylinder Accessories

Flat Grooved1) Tilt Base4) Plunger

BasePlate

Saddles MountingBlock

Clevis Eyes

A-53F2)

A-102F3)

––––––

A-53G2)

A-102G3)

A-152GA-252GA-252G

–––

RB-52), AW-512), AW-532)

RB-10, AW-102RB-15RB-25RB-25

–––

–

JBI-10–

JBI-25–

JBI-50––

–

CAT-103)

CAT-10CAT-50CAT-50CAT-100CAT-100CAT-100

5 (45)

10 (101)

15 (142)

25 (232)

30 (295)

50 (498)

75 (718)

95 (933)

C

AB

C

AB

A

B

C

0-5°

Model Nr.

A-53FA-102F

A-53GA-102GA-152GA-252G

REB-5REB-10REB-15REB-25REP-5REP-10REP-25

Base4)

Plunger

A

B 0-5°

E FB

AC D D

AC

EFB

1722

17222235

2535

25353850

66

6699

Model Nr.

Model Nr.Type

A

A

B C D E

A

A

B C D E F

B AC B C

RB-5AW-51AW-53RB-10AW-102RB-15RB-25

Model Nr.

JBI-10JBI-25

JBI-50

D

A

CE

B

C

D

B

AE

Model Nr.

CAT-10CAT-50

CAT-100

3550

71

228279

304

228279

15

135140

95

5886

131

2026

31

44637695284257

47666679416174

14252538142538

16222231162231

16252531162531

25353541192835

11/2"- 1611/2"- 1611/2"- 1621/4"- 1421/4"- 1423/4"- 1635/16"- 12

887072114100101127

765978882

114127

–107–

16––

25241925303850

–5457–

76––

–1/4"- 201/4"- 20

–7/16"- 20

––

–4110–

58––

1521

24

2235

–

B C D E F G H

JBI-10, -25

REB REP

AW-51 AW-102 (I=4,8)RB-5, -10 RB-15, -25 AW-53

JBI-50

Saddle Dimensions (mm) Tilt Saddle Dimensions (mm)

Mounting Block Dimensions (mm)

Clevis Eye Dimensions (mm)

Flat

H SELECTION CHART

H DIMENSION CHARTS

1) Standard on 5-30 ton RC-cylinders 2) Except RC-50 3) Except RC-101 4) Mounting screws are included.

Tilt

REB-52)

REB-10REB-15REB-25

––––

REP-52)

REP-103)

REP-10REP-25REP-25

–––

13®

RCASeries

Single-Acting, Aluminium Cylinders

• Light weight, aluminium design for maximum portability• ANSI B30.1 design and test specification approvals guar-

antee increased product life and user safety• Designed for use in all positions• Steel base-plate for increased durability• Base and plunger are hard coat anodized• CR-400 coupler and dust cap included on all models• Plunger wiper extends life

212421638

41,741,741,7

Extend.Height

B(mm)

Outside Dia.

D(mm)

Cyl. Bore Dia.

E(mm)

PlungerDia.

F(mm)

72,972,972,9

Weight

(kg)

Coll.Height

A(mm)

232336445

181235292

Baseto Adv.

Port H

(mm)

120120120

Saddle Protr.

from Plgr.K

(mm)

Saddle Dia.

J(mm)

57,257,257,2

5,47,0

10,0

111

575757

505050

H

KF

A

J

D

B

E3/8"-18NPT

51101153

30 (292)

Stroke

(mm)

Cylinder Capacity

ton (kN)

CylinderEffective

Area

(cm2)

ModelNumber

Oil Capacity

(cm3)

RCA-302RCA-304RCA-306

Capacity:

30-50 tonStroke:


700 bar

Saddles

The RCA cylinders areequipped standard withgrooved saddles. For applications requiring a

tilt saddle, the CAT-101 (50 ton) is available as an accessory.

Page: 17

3567261089

71,271,271,2

95,295,295,2

227329431

177227278

149149149

79,279,279,2

9,812,014,3

333

454545

717171

50102153

50 (498)RCA-502RCA-504RCA-506

F Light weight Hand Pump

If your choice is an RCA aluminiumcylinder, then an Enerpac P-392 or P-802 composite hand pump wouldmake the optimal light weight set.

H Shown from left to right: RCA-506, RCA-502

CLP-Series, Pancake Lock Nut Cylinders

14

®


60 (606)100 (1027)160 (1619)200 (1999)260 (2567)400 (3916)520 (5114)

50504545454545

86,6146,8231,3285,6366,8559,5730,6

432734

10401285165025173287

CylinderCapacity

ton (kN)

Stroke

(mm)

CylinderEffective

Area

(cm2)

OilCapacity

(cm3)

ModelNumber*

CLP-602CLP-1002CLP-1602CLP-2002CLP-2502CLP-4002CLP-5002

H Shown from left to right: CLP-2002, CLP-5002

• Extremely low height for use in confined areas• Safety lock nut for mechanical load holding• Single-acting, load return• Optional special synthetic coating for improved corrosion

resistance and lower friction for smoother operation towithstand side load forces up to 3% of rated cylindercapacity without scoring

• Overflow port functions as a stroke limiter• CR-400 coupler and dust cap included on all models

The Lowest Power Lifter

H Only the extreme low height CLP-cylinder fits in thisconfined area to lift the construction.

Saddles

All CLP-Series cylindersinclude integral tilt saddleswith maximum tilt angles up to 5°.

Gauges

Minimize the risk of overloa-ding and ensure long,dependable service fromyour equipment. Refer to the

System Components Section for a fullrange of gauges.

Page: 105

Hoses



Page: 106

* For special synthetic coating add suffix ‘C’ to modelnumber.

15®

Single-Acting, Pancake Lock Nut Cylinders

E

H

D

F

R

J

3/8"-18NPT

S

A

B

K

125137148155159178192

Coll.Height

A(mm)

175187193200204223237

Ext.Height

B(mm)

140175220245275350400

OutsideDiameter

D(mm)

105,0136,7171,6190,7216,1266,9305,0

Tr 104 x 4Tr 136 x 6Tr 171 x 6Tr 190 x 6Tr 216 x 6Tr 266 x 6Tr 305 x 6

Cyl. BoreDiameter

E(mm)

19212730323948

96126160180200250290

689

10111110

5°5°5°5°5°4°3°

28314043445562

1526445774

134189

Base to Adv. Port

H(mm)

SaddleDiameter

J(mm)

Saddle Protr.

from Plgr.K

(mm)

SaddleMax. Tilt

AngleR

Lock NutHeight

S(mm)

Weight

(kg)

PlungerDiameter

F(mm)

CLPSeries

Capacity:

60-520 tonStroke:


700 bar

ModelNumber*

CLP-602CLP-1002CLP-1602CLP-2002CLP-2502CLP-4002CLP-5002

ALL CLP-SERIES CYLIN-DERS REQUIRE A SOLIDLIFTING SURFACE FORCORRECT SUPPORT.

USE OF PANCAKE CYLINDERS ONSURFACES SUCH AS SAND, MUD ORDIRT, MAY RESULT IN CYLINDERDAMAGE!

WRONG! RIGHT!

Rough soil Flat Lifting Surface

For more safety instructions see our ‘Yellow Pages’.

Page: 94

✗ ✓

Speed Chart

See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ todetermine your approximatecylinder speed.

Page: 103

16

®

Hydraulic Technology WorldwideRSM/RCS-Series, Low Height Cylinders

6121113161616163845626057

418325599

16420331755

129261373722

5 (45)

10 (101)

20 (201)

30 (295)

45 (435)

75 (718)

90 (887)

150 (1386)

10 (101)

20 (201)

30 (295)

45 (435)

90 (887)

Stroke

(mm)

Cyl. Capa-

city

ton (kN)

Cyl.Effect.Area

(cm2)

ModelNumber

6,514,528,742,162,1

102,6126,7198,114,528,742,162,1

126,7

Oil Cap.

(cm3)

RSM-50RSM-100RSM-200RSM-300RSM-500RSM-750RSM-1000RSM-1500RCS-101*RCS-201*RCS-302*RCS-502*RCS-1002*

H Shown from left to right: RSM-1000, RSM-300, RSM-50, RCS-1002, RCS-302

RSM-series, Flat-Jac® Cylinders• Compact, flat design for use where most other cylinders

will not fit• RSM-750, 1000 and 1500 have handles for easy carrying• Mounting holes permit easy fixturing• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models,

except RSM-50 which is fitted with an AR-400 coupler.• Hard chrome plated high quality steel plungers• Grooved plunger ends require no saddle

RCS-series, Low Height Cylinders• Lightweight, low profile design for use in confined spaces• Baked enamel finish for increased corrosion resistance• Plunger wiper reduces contamination, extending

cylinder life• CR-400 coupler and dust cap included on all models• Grooved plunger end with threaded holes for mounting tilt

saddles• Integral handle on RCS-1002 for easy carrying• Hard chrome plated steel plungers

H Only a couple of centimeters will do for an RSM-cylinder to lift a large steel construction.

Maximum Power to Height Ratio

Saddles

All RCS-Series cylindershave plunger mounting holesfor installation of tilt saddles.See table for selection and

dimensional information.

Page: 17

Machine Lift

In very confined work areasa machine lift often offers thesolution for lifting the first few millimetres.

Page: 169

* Available as set, see note on next page.

17®

ModelNumber

CAT-11CAT-51CAT-101

Single-Acting, Low Height Cylinders

58 x 4182 x 55

101 x 76117 x 95

139 x 114165 x 139177 x 152215 x 190

6992

101127165

28,742,960,573,288,9114,3127,0158,842,960,573,288,9127,0

16191919191919231717192331

Ext.Height

B(mm)

OutsideDiameter

D(mm)

CylinderBore Dia.

E(mm)

PlungerDia.

F(mm)

1,01,43,14,56,8

11,314,526,34,15,06,8

10,922,7

Weight

(kg)

CollapsedHeight

A(mm)

385462718295

101116126143179182198

25,438,150,850,869,882,692,2

114,338,150,866,569,892,2

Base toAdv. Port.

H(mm)

1112222253321

2027394757697695–––––

2234394453667482–––––

PlungerProtrusionfrom Base

K(mm)

ModelNumber

––––––––

2639393955

BoltCircle

U(mm)

––––––––

M4M5M5M5M8

––––––––8888

10

Thread

O(mm)

Plungerto

BaseL

(mm)

Plungerto Mtg.

Hole M

(mm)

ThreadDepth

P(mm)

RSM-50*RSM-100RSM-200RSM-300RSM-500RSM-750RSM-1000RSM-1500RCS-101*RCS-201*RCS-302*RCS-502*RCS-1002*

H

KF

P

A

D

B

3/8"-18NPT

E

O

U

3/8"-18NPT

E

H

K

F

AB

U1

L

D

VM

28364952667676

117

57

101011131313

7,910,715,115,919,020,620,620,6

4,37,99,9

11,212,714,214,214,2

BoltCircle

U1

RSM Cylinder Mounting Hole Dimensions (mm)

HoleDia.

V

CounterBoreDia.

CounterBore

Depth

RSM-50RSM-100RSM-200RSM-300RSM-500RSM-750RSM-1000RSM-1500

ModelNumber

355071

101517

212935

A B C*

Optional Bolt On Tilt Saddle Dimensions (mm)

For Cylinder Model:

RCS-101RCS-201, -302, -502RCS-1002

RSM-SeriesRCS-Series

32425158667985

1008898

117122141

A

BC 0-5°

RSMRCSSeries

Capacity:

5-150 tonStroke:


700 bar* ‘C’ dimension equals saddle protrusion from plunger. Mounting screws are included.




Page: 50

18

®

Hydraulic Technology WorldwideBRC/BRP-Series, Pull Cylinders

• High strength alloy steel construction• Plunger blow-out protection to prevent rod over-extension• Hard chrome-plated plunger for long life• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models• Baked enamel finish for increased corrosion resistance• Plunger wiper reduces contamination, extending

cylinder life

H Shown from left to right: BRC-25, BRC-46, BRP-306, BRP-606, BRP-106C

H Ship building, welding and Enerpac pull cylinders go hand in hand.H In this roof construction an Enerpac pull cylinder

is applied to position the parts to be welded.

For use withSubassemblies andModules

Attachments and Accessories

BRC-25 and BRC-46 unitshave base, collar and plun-ger threads to affix

a range of optional attachments andaccessories, such as chains, saddlesand extension tubes.

Page: 162

Gauges

Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the


Page: 105




Page: 50

Single-Acting, Pull Cylinders

19®

Ext.Height

B(mm)

Coll.Height

A(mm)

Cyl.Effect.Area

(cm2)

Oil Cap.

(cm3)

BRP-106C*BRP-106L*BRP-302BRP-306BRP-606*

15,015,046,646,672,1

2272272947221096

58754110331085719

738692

10961240871

8585

136136140

54,154,188,988,9

110,0

11967

114114130

62115145145149

3022353539

3530393950

3232505070

15,913,234,048,153,5

Cylinder Capacity

ton (kN)

ModelNumber

10 (105)

30 (326)

50 (505)

15115163

155152

Stroke

(mm)

OutsideDia.

D(mm)

Cyl. Bore Dia.

E(mm)

LinkOpen-

ingL

(mm)

LinkThick-ness

M(mm)

LinkWidth

N(mm)

Slot toLinkEnd

T(mm)

Weight

(kg)

LinkHeight

J(mm)

Ext.Height

B(mm)

Coll.Height

A(mm)

Cyl.Effect.Area

(cm2)

Oil Cap.

(cm3)

BRC-25BRC-46BRC-106

Cylinder Capacity

ton (kN)

ModelNumber

2,5 (24)

5 (51)

10 (105)

127140151

Stroke

(mm)

Outs.Dia.

D(mm)

Cyl.Bore Dia.

E(mm)

Plgr.Dia.

F(mm)

Top toInletPort

H(mm)

SaddleDiameter

J

Plgr.Thd.Lgth.

P(mm)

PlungerOutsideThread

Q

Weight

(kg)

––

25

3,57,315,0

45101228

264301289

391441440

485785

28,442,954,1

19,030,231,8

454239

3/4"- 14 NPT11/4"-111/2 NPT

–

11/16"- 2413/16"-16M30X2

1,84,59,5

3/8"-18NPT

H

Z

V ED

PXA

B

F JQ W

Q

P

Q

3/4" - 14 NPT11/4"-111/2 NPT

M30 x 2

11/2"- 16 UN

21/4"- 16 UN

M85 x 2

242625

172424

BRC Cylinder Mounting Dimensions (mm)

Base Mounting

HoleV

CollarThread

W

CollarThd. Lgth.

X

Mtg.Thd. Lgth.

Z

BRC-25BRC-46BRC-106

ModelNumber

N

A TB

L

M

3/8"-18NPT

E

D J

M30 x 2

AB

N

M

J

L T3/8"-18NPT

E

DN

D J

M

TAB

E

3/8"-18NPT

L11/4"-7UNC

M

DN

3/8"-18NPT

AB

L

T

E

J

M50 x 3

M30 x 2

BRP-106C

BRC-25 to BRC-106

BRC-106 only

BRP-106L

BRP-302 and BRP-306

BRP-606

* Fitted with rubber bellows for rod protection.

BRC/BRPSeries

Capacity:

2,5-50 tonStroke:


700 bar

20

®

Hydraulic Technology WorldwideRCH-Series, Hollow Plunger CylindersH Shown from left to right: RCH-306, RCH-120, RCH-1003

H Two RCH-121 cylinders (13 ton) are used here to clamp this large die. The hollow plunger allows fixturing the slot bolt.

842427649

15564

15576

15376

147575

141150476298722626

12591011

13 (125)

20 (215)

30 (326)

60 (576)

95 (931)

Stroke

(mm)

CylinderCapacity

ton (kN)

Cyl.Effect. Area

(cm2)

ModelNumber

17,917,917,918,530,730,746,646,682,382,3

133,0

Oil Cap.

(cm3)

RCH-120RCH-121*RCH-1211RCH-123RCH-202*RCH-206RCH-302*RCH-306RCH-603*RCH-606RCH-1003*

Versatility in Testing,Maintenance and Tensioning Applications

* Available as set, see note on this page.

Saddles

Most RCH-Series cylinders are equipped with smoothsaddles. See table at nextpage for optional threaded

saddles and all dimensional information.

Page: 21

Hoses



Page: 106

• Hollow plunger design allows for both pull and push forces• Nickel-plated, floating center tube on models over 20 ton

increases product life• Baked enamel finish for increased corrosion resistance• Collar threads for easy fixturing• RCH-120 includes AR-630 coupler and has 1/4" NPT port• RCH-121 and RCH-1211 have FZ-1630 reducer and

AR-630 coupler, all other models feature CR-400 coupler




Page: 50

BC

A

BC

A

21®

ModelNumber

Single-Acting, Hollow Plunger Cylinders

696969699898

114114159159212

54,154,154,154,173,173,188,988,9

123,9123,9165,1

––––

545463639191126

Ext.Height

B(mm)

Out.Dia.

D(mm)

Cyl.Bore Dia.

E(mm)

Plgr.Dia.

F

(mm)

Weight

(kg)

Coll.Height

A(mm)

55120120184162306178330247323254

63162162260212461242485323476330

35,135,135,135,154,154,163,563,591,991,9127,0

919191919252125313138

Cyl. Baseto Advance

Port H

(mm)

––––6699121212

3/4"- 16 UN

–3/4"- 16 UN

–19/16"- 16 UN

19/16"- 16 UN

113/16"- 16 UN

113/16"- 16 UN

23/4"- 16 UN

23/4"- 16 UN

4"- 16 UN

Saddle Dia.

J(mm)

Saddle Protr.

from Plgr.K

(mm)

ModelNumber

19,619,619,619,626,926,933,333,353,853,879,0

1,52,82,84,47,7

14,110,921,828,135,463,0

CenterHoleDia.Y

(mm)

16–

16–

19192222191925

3030303038384242484860

23/4"- 1623/4"- 1623/4"- 1623/4"- 1637/8"- 1237/8"- 1241/2"- 1241/2"- 1261/4"- 1261/4"- 1283/8"- 12

Plunger InternalThread

O

CollarThread

W

CollarThreadLength

X(mm)

PlungerThreadLength

P(mm)

RCH-120RCH-121*RCH-1211RCH-123RCH-202*RCH-206RCH-302*RCH-306RCH-603*RCH-606RCH-1003*

50,8––

50,882,682,692,292,2130,3130,3177,8

5/16"-18 UNC

––

5/16" -18 UNC3/8"-16 UNC3/8" -16 UNC3/8" -16 UNC3/8" -16 UNC1/2" -13 UNC1/2" -13 UNC5/8" -11 UNC

6,4––

12,715,715,714,014,014,014,019,0

Bolt Circle

U

Base Mounting Hole Dimensions (mm)

ThreadDepth

Z

Thread

V

RCH-120RCH-121RCH-1211RCH-123RCH-202RCH-206RCH-302RCH-306RCH-603RCH-606RCH-1003

V

Y U D

H

3/8"-18NPT

F

P

OW

X

Z

A

B

E 3/8"-18NPT

Z

H

X

A

B

KF

P

OJW

Y U D

V

E

RCH-120 to RCH-123 models RCH-202 to RCH-1003 models

RCHSeries

Capacity:

13-95 tonStroke:


700 bar

Saddle Dimensions (mm)Saddle Model Nr.

HP-2035HP-3044HP-5035HP-10033HP-2015HP-3015HP-5016HP-10016

Cylinder Model Number

RCH-202, 206RCH-302, 306RCH-603, 606RCH-1003RCH-202, 206RCH-302, 306RCH-603, 606RCH-1003

Saddle Type

Smooth*Hollow

ThreadedHollow

536391126536391126

Optional Heat Treated Hollow Saddles

991213991213

26,933,353,879,01"- 8

11/4"- 715/8"- 51/2

21/2"- 8

A B C

* Standard on all RCH-models (except RCH 13 ton range).

RCH-121 and RCH-1211 have a 47 mm dia. boss that protrudes 6 mm from base.

RRH-Series, Hollow Plunger Cylinders

22

178258891662573876153257203

30,430,454,254,254,287,487,487,487,4

102,6

8291202733

13662115505

1011203534204144

541784482900

1393333666

133722462083

30

60

95

145

Stroke

(mm)

CylinderClass

ton

Cylinder Effective Area

(cm2)

Max. CylinderCapacity

(kN)

ModelNumber

326326576576576931931931931

1429

213213380380380612612612612718

46,646,682,382,382,3

133,0133,0133,0133,0204,1

Oil Capacity

(cm3)

RRH-307RRH-3010RRH-603RRH-606RRH-6010RRH-1001RRH-1003RRH-1006RRH-10010RRH-1508

AdvanceAdvance AdvanceRetractRetract Retract

H Shown from left to right: RRH-3010, RRH-1001, RRH-6010

• Relief valves prevent damage in case of over-pressurisa-tion

• Baked enamel finish for increased corrosion resistance• Collar threads enable easy fixturing

(except RRH-1001 and RRH-1508)• Double-acting version for fast retraction• Nickel-plated, floating center tube increases product life• Hollow plunger allows for both pull and push forces• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending

cylinder life

Versatility in Testing,Maintenance and Tensioning Applications

H Double-acting hollow plunger cylinders areapplied at this site to level bridge sections.

Saddles

All RRH-Series cylinders are equipped with smoothsaddles. See table at nextpage for optional threaded

saddles and all dimensional information.

Page: 23

Pump Selection

A double-acting cylindermust be powered by a pumpwith a 4-way valve.

Page: 53

®


Gauges

Minimize the risk of overloading and ensurelong, dependable servicefrom your equipment. Refer

to the System Components Section for a full range of gauges.

Page: 105

23®

912

13

139

12

13

13

Double-Acting, Hollow Plunger Cylinders

114114159159159212212212212247

88,988,9

123,9123,9123,9165,1165,1165,1165,1190,5

60606666664485858560

6363919191126126126126127

Ext. Height

B(mm)

Out. Dia.

D(mm)

Cyl. Bore Dia.

E(mm)

Plgr.Dia.

F(mm)

2127283545336179

106111

Weight

(kg)

Coll. Height

A(mm)

330431247323438165254342460349

508689336489695203330495717552

63,563,591,991,991,9127,0127,0127,0127,0152,4

25253131313838383838

Cyl. Baseto Adv.

Port H

(mm)

Cyl. Topto Return

Port I

(mm)

99121212121212124

113/16"- 16113/16"- 1623/4"- 1623/4"- 1623/4"- 164"- 164"- 164"- 164"- 16

41/4"- 12

Saddle Dia.

J(mm)

SaddleProtr.

fr. Plgr.K

(mm)

ModelNumber

33,333,353,853,853,879,279,279,279,279,2

Center HoleDia.Y

(mm)

22221919192525252525

4242484848–

606060–

41/2"- 1241/2"- 1261/4"- 1261/4"- 1261/4"- 12

–83/8"- 1283/8"- 1283/8"- 12

–

Thread

O

CollarThreadLength

X(mm)

CollarThread

W

PlungerThreadLength

P(mm)


Z

X

A

B

K

3/8"-18NPT

H

I

F

P

OJW

E

Y U D

V

30°

92,292,2

130,0130,0130,0177,8177,8177,8177,8

–

3/8" - 163/8" - 161/2" - 131/2" - 131/2" - 135/8" - 115/8" - 115/8" - 115/8" - 11

–

15,715,714,014,014,019,019,019,019,0

–

Base Mounting Hole Dimensions (mm)


Bolt Circle

U

ThreadDepth

Z

Thread

V

ModelNumber

RRHSeries

Capacity:

30-145 tonStroke:


700 bar

Saddle Dimensions (mm)Saddle Model Nr.

HP-3044HP-5035

HP-10033

HP-10032HP-3015HP-5016

HP-10016

HP-10015


RRH-307, 3010RRH-603, 606, 6010RRH-1001, 1003, RRH-1006, 10010RRH-1508RRH-307, 3010RRH-603, 606, 6010RRH-1001, 1003, RRH-1006, 10010RRH-1508

Saddle Type

Smooth*Hollow

ThreadedHollow

6391

126

1266391

126

126

Optional Heat Treated Saddles

33,353,8

79,0

80,011/4"- 7

15/8"- 51/2

21/2"- 8

21/2"- 8

BC

A

BC

A

A B C

* Standard on all RRH-models.

Hoses



Page: 106

BRD-Series, Precision Production Cylinders

24

2879

1552879

155257159260159260

35353580808080142142222222

1616164444444477779898

5,15,15,111,411,411,411,420,320,331,731,7

2,22,22,26,36,36,36,310,610,613,713,7

1440793290

177293323528504824

61734185098

162169276218356

4

8

15

23

Stroke

(mm)

CylinderCapacity

(ton)


(cm2)


(kN)

ModelNumber

Oil Capacity

(cm3)

BRD-41BRD-43BRD-46BRD-91BRD-93BRD-96BRD-910BRD-166BRD-1610BRD-256BRD-2510

AdvanceAdvance AdvanceRetractRetract Retract

H Shown from left to right: BRD-2510, BRD-96, BRD-256, BRD-41, BRD-166

• Designed for long life, the best choice for productionapplications

• Unique mounting configurations simplify fixturing• Baked enamel finish for increased corrosion resistance• Double-acting operation develops force in both

directions, providing maximum versatility• Plunger wiper reduces contamination, extending

cylinder life• Imperial models (RD-series) available on request

High Precision and High CyclePerformance

Golden Ring Design

Enerpac BRD-Cylinders areprovided with the Golden Ring Design,for long, trouble-free performance.

Coll.Height

A(mm)

186237313223274350452389491424526

162213289198249325427359461397499

5050506565656580809292

Ext.Height

B(mm)

BodyLength

C(mm)

Out. Dia.

D(mm)

Cyl. BoreDia.

E(mm)

Plgr.Dia.

F(mm)

214316468251353505709548751583786

25,425,425,438,138,138,138,150,850,863,563,5

19,019,019,025,425,425,425,435,035,047,847,8

This paper mill uses BRD cylinders forprecision when trimming. E

Speed Chart

See the Enerpac Cylinder SpeedChart in our ’Yellow Pages’ todetermine your approximatecylinder speed.

Page: 103

®


25®

D

C

E

AB

F

H

Foot MountingMounts onto cylindercollar

Double-Acting, Precision Production Cylinders

N

A

N

P

W

C

Z1

I

ZX

F

WD

K

E

H

X

B

Q

3/8"-18NPT

2,02,63,63,04,25,67,3

10,214,516,020,3

Weight

(kg)

Bottom toAdvance

Port I

(mm)

4747475757575773738989

2424242525252530302727

PlungerProtrusion

K(mm)

ModelNumber

M16 x 1,5M16 x 1,5M16 x 1,5M22 x 1,5M22 x 1,5M22 x 1,5M22 x 1,5M30 x 1,5M30 x 1,5M42 x 1,5M42 x 1,5

2929293838383854547070

2222222222222228282525

NeckLength

N(mm)

PlungerThreadLength

P(mm)

PlungerExternalThread

Q(mm)

BRD-41BRD-43BRD-46BRD-91BRD-93BRD-96BRD-910BRD-166BRD-1610BRD-256BRD-2510

M42 x 1,5M42 x 1,5M42 x 1,5M56 x 2M56 x 2M56 x 2M56 x 2M70 x 2M70 x 2M85 x 2M85 x 2

1111111414141422222929

M30 x 1,5M30 x 1,5M30 x 1,5M42 x 1,5M42 x 1,5M42 x 1,5M42 x 1,5M56 x 2M56 x 2M70 x 2M70 x 2

999

1414141424242626

Cylinder Mounting Dimensions (mm)

CollarThread

W

CollarThreadLength

X

Int. BaseThread

Z

Int. BaseThreadLength

Z1

H

C

A

D

B

E

F

48

1523

48

1523

48

1523

48

1523

42,156,170,185,1

42,156,170,185,1

M42 x 1,5M56 x 2M70 x 2M85 x 2

M16 x 1,5M22 x 1,5M30 x 1,5M42 x 1,5

80105127159

80105127159

577592

108

M30 x 1,5M42 x 1,5M56 x 1,5M70 x 1,5

10,513,520,026,5

11,011,016,017,0

6,36,76,76,7

16,020,025,032,0

20,025,035,045,0

19,025,435,044,5

9,512,719,025,4

15,925,431,838,2

57,082,5

100,0125,0

––––

––––

19,125,425,425,4

31,844,552,463,5

––––

––––

23,823,830,227,0

BAD-141BAD-171BAD-181BAD-191




ModelNumber

BRD-Cyl.(ton) A B C D E F H

E

C

D

AB

E

C AB

D

Flange MountingMounts onto cylindercollar

Clevis EyeThreads onto plunger orinto cylinder base

Retainer NutFor locking foot or flangemountings. Tightens ontocylinder collar threads(Included with foot andflange mounting kits)

58,078,095,2

117,5

78,698,4

115,9135,7

49,565,581,096,5

33,338,152,355,6

Foot Mounting with Retainer Nut

Flange Mounting with Retainer Nut

Retainer Nut

Clevis Eye

BRDSeries

Capacity:

4-23 tonStroke:


700 bar

4747475757575773738989

Top toRetract

PortH

(mm)

Dimensions (mm)

H BRD CYLINDER ATTACHMENTS

Pump Selection

A double-acting cylindermust be powered by a pumpwith a 4-way valve.

RR-Series, Double-Acting CylindersH Shown from left to right: RR-10013, RR-1502, RR-20013, RR-1010, RR-7513

26

®


• Collar threads, plunger threads and base mounting holesfor easy fixturing (on most models)

• Baked enamel finish for increased corrosion resistance• Removable hardened saddles protect plunger during lifting

and pressing• Built-in safety valve prevents accidental

over-pressurization• CR-400 couplers included on all models• Plunger wiper reduces contamination, extending

cylinder life

Most VersatilePerformers

Rugged enough for the toughest job site uses and precision designed for high-cycle industrial uses.

H RR-cylinders provide power and precision in a special hydraulic press.

H When it comes to precise and controlled positioning of heavy loads, RR cylinders arethe best solution.

Golden Ring Design

Enerpac RR-Cylindersincorporate the Golden Ring Design, for long, trouble-free performance.

Saddles

All RR-Series cylinders haveplunger mounting holes forinstallation of CAT-Series tiltsaddles.

Page: 12

Page: 53

27®

Double-Acting Cylinders

RR-1010*RR-1012*RR-308*RR-3014*RR-506RR-5013RR-5020RR-756RR-7513RR-1006RR-10013RR-10018RR-1502RR-1506RR-15013RR-15032RR-2006RR-20013RR-20018RR-20024RR-20036RR-20048RR-3006RR-30012RR-30018RR-30024RR-30036RR-30048RR-4006RR-40012RR-40018RR-40024RR-40036RR-40048RR-5006RR-50012RR-50018RR-50024RR-50036RR-50048

25430520936815633451115633316833346057

156333815152330457610914

1219153305457609915

1219152305457610914

1219153305457609915

1219

14,514,542,142,171,271,271,2102,6102,6133,3133,3133,3198,1198,1198,1198,1285,0285,0285,0285,0285,0285,0457,3457,3457,3457,3457,3457,3613,1613,1613,1613,1613,1613,1729,7729,7729,7729,7729,7729,7

4,84,819,119,121,521,521,531,431,462,262,262,295,495,495,495,4145,3145,3145,3145,3145,3145,3243,2243,2243,2243,2243,2243,2328,1328,1328,1328,1328,1328,1405,4405,4405,4405,4405,4405,4

368442879154911112378363816013417223844396132112930906597

1614543329405

130251738526049347416997

13947208892785041843557459319

1870028018374005603774737111642225633347444406676888951

122147400703335718

1099490

1046104520712861544

1488317777752209479566408863

132801771237217418

111141481122253296464987

10007149952001429988399966203

1236518526246893697349418

10(101)

30(295)

50(498)

75(718)

95(933)

140(1386)

200(1995)

325(3201)

440(4292)

520(5108)

Stroke

(mm)

CylinderCapacity

ton(kN)


(cm2)

ModelNumber

Oil Capacity

(cm3)

Push PushPull Pull

RRSeries

Capacity:

10-520 tonStroke:


700 bar


Additional Stroke Lengths

RR-Series cylinders, 325through 520 ton are availablein additional stroke lengths.Please contact Enerpac for

additional stroke length options.

Enerpac CLR-Series

If your application does not require highprecision, Enerpac CLR-series cylindersmay be the right alternative.

Page: 34

Coll.Height

(mm)

409457387549331509733347525357524687196385582

1116430608765917

12221527485638790943

12471552538690843995

13001605577730882

103513391644

Optional Snap-in Saddles

Optional snap-in saddles forRR-series double-actingcylinders:

For additional information on saddles:

SaddleType

Cylinder ModelNumber

SaddleModelNumber

Flat

Grooved

Tilt

RR-1010, 1012RR-1010, 1012RR-308, 3014

RR-1010, 1012RR-308, 3014RR-506, 5013 RR-5020, 756

RR-7513

A-102FA-102GA-252GCAT-10CAT-50

CAT-100

Page: 12

Cylinder retract capacity forcertain RR cylinders may beless than theoretical values,as a result of reduced reliefvalve pressure settings.

Speed Chart

See the Enerpac Cylinder SpeedChart in our ’Yellow Pages’ todetermine your approximatecylinder speed.

Page: 103

P

O

H

X

B

A

NI

K

3/8"-18NPT E

D

J

FW

Z

X

A

B

K

W

3/8"-18NPT

H

I

D

E

F

P

OJ

U

V

RR-Series, Double-Acting Cylinders

28

®



10

30

50

75

95

140

200

325

440

520

Stroke

(mm)

CylinderCapacity

ton


(cm2)


(kN)

ModelNumber

Oil Capacity

(cm3)

PushPush PushPullPull Pull


254305209368156334511156333168333460571563338151523304576109141219153305457609915121915230545761091412191533054576099151219

Ext. Height

B(mm)

Coll.Height

A(mm)

OutsideDia.

D(mm)

2 mounting holes for RR-5020 only.

4 mounting holes for 95 ton, 140 ton (except RR-1502, 15032),200 ton, 325 ton, 440 ton and 520 ton.

Base mounting hole location isfor reference only, as it is affectedby assembly.

RR-1010 to RR-3014 models

RR-506 to RR-50048 models

1011012952954984984987187189339339331386138613861386199519951995199519951995320132013201320132013201429242924292429242924292510851085108510851085108

33335353

103103103156156435435435668668668668

101710171017101710171017170317031703170317031703229722972297229722972297283828382838283828382838

14,514,542,142,171,271,271,2

102,6102,6133,3133,3133,3198,1198,1198,1198,1285,0285,0285,0285,0285,0285,0457,3457,3457,3457,3457,3457,3613,1613,1613,1613,1613,1613,1729,7729,7729,7729,7729,7729,7

4,84,8

19,119,121,521,521,531,431,462,262,262,295,495,495,495,4

145,3145,3145,3145,3145,3145,3243,2243,2243,2243,2243,2243,2328,1328,1328,1328,1328,1328,1405,4405,4405,4405,4405,4405,4

368442879

154911112378363816013417223844396132112930906597

1614543329405

130251738526049347416997

13947208892785041843557459319

1870028018374005603774737111642225633347444406676888951

122147400703335718

1099490

1046104520712861544

1488317777752209479566408863

132801771237217418

111141481122253296464987

10007149952001429988399966203

1236518526246893697349418

409457387549331509733347525357524687196385582

1116430608765917

12221527485638790943

12471552538690843995

13001605577730882

103513391644

663762596917487843

1244503858525857

1147253541915

1931582938

1222152721362746638943

1247155221622771690995

1300160522142824730

10351339164422542863

7373

101101127127127146146177177177203203203203247247247247247247311311311311311311358358358358358358397397397397397397

* For RR-1010 and RR-1012: N = 32 mm; for RR-308 and RR-3014: N = 55 mm.

Cylinder retract capacity forcertain RR cylinders may beless than theoretical values,as a result of reduced reliefvalve pressure settings.

29®

Double-Acting Cylinders


Cyl.BoreDia.

E(mm)

Plgr.Dia.

F(mm)

Base to Adv.

PortH

(mm)

Top toRet. Port

I(mm)

SaddleDia.

J(mm)

Weight

(kg)

PlungerThreadLength

P(mm)

SaddleProtr.

fr. Plgr. K

(mm)

PlungerInternal Thread

O

Base Mounting Holes ModelNumber

CollarThread

W

CollarThreadLength

X(mm)

Thread

V

Thd. Depth

Z(mm)

Bolt C.Dia.U

(mm)

RRSeries

Capacity:

10-520 tonStroke:


700 bar

42,942,973,273,295,295,295,2

114,3114,3130,3130,3130,3158,8158,8158,8158,8190,5190,5190,5190,5190,5190,5241,3241,3241,3241,3241,3241,3279,4279,4279,4279,4279,4279,4304,8304,8304,8304,8304,8304,8

35,135,154,154,179,579,579,595,295,295,295,295,2

114,3114,3114,3114,3133,4133,4133,4133,4133,4133,4165,1165,1165,1165,1165,1165,1190,5190,5190,5190,5190,5190,5203,2203,2203,2203,2203,2203,2

36363639282857303038384122494976575785858585888888888888

108108108108108108120120120120120120

575781817676767681717192668484889696

101101101101114114114114114114133133133133133133152152152152152152

35355050717171717176767695959595

133133133133133133165165165165165165190190190190190190203203203203203203

1110102226633315151515222222222222282828282828282828282828282828282828

1"- 81"- 8

11/2"- 1611/2"- 161"- 121"- 121"- 121"- 121"- 12

13/4"- 1213/4"- 1213/4"- 12

– 33/8"- 1633/8"- 1633/8"- 16

– 21/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 123"- 123"- 123"- 123"- 123"- 123"- 12

31/4"- 1231/4"- 1231/4"- 1231/4"- 1231/4"- 1231/4"- 12

252525252525253838353535–

353535–

6363636363828282828282959595959595

108108108108108108

–– – – – –

76– –

139139139

– 158158

– 127127127127127127158158158158158158203203203203203203203203203203203203

– – – – – –

1/2"- 13– –

3/4"- 103/4"- 103/4"- 10

– 3/4"- 163/4"- 16

– 1"- 81"- 81"- 81"- 81"- 81"- 8

11/4"- 711/4"- 711/4"- 711/4"- 711/4"- 711/4"- 711/2"- 611/2"- 611/2"- 611/2"- 611/2"- 611/2"- 613/4"- 513/4"- 513/4"- 513/4"- 513/4"- 513/4"- 5

– – – – – –

25– –

252525–

2828–

252525252525444444444444505050505050575757575757

21/4"- 1421/4"- 1435/16"- 1235/16"- 12

5"- 125"- 125"- 12

53/4"- 1253/4"- 1267/8"- 1267/8"- 1267/8"- 12

– 8"- 128"- 128"- 12

– 93/4"- 1293/4"- 1293/4"- 1293/4"- 1293/4"- 12121/4"- 12121/4"- 12121/4"- 12121/4"- 12121/4"- 12121/4"- 12141/8"- 8141/8"- 8141/8"- 8141/8"- 8141/8"- 8141/8"- 8155/8"- 8155/8"- 8155/8"- 8155/8"- 8155/8"- 8155/8"- 8

262649494444443838505050–

555555–

5454545454585858585858656565656565797979797979

1214182930526841686193

1174993

124238147199204279383483200312385469628780303399453597792980432589680816

10021224

Couplers Included!


CLS-Series, High Tonnage Cylinders

The Single-ActingHeavy LiftingSolution

30

®


H Shown from left to right: CLS-1002, CLS-506, CLS-502

• Single-acting, load return• Special synthetic coating for improved corrosion resistan-

ce and lower friction for smoother operation• Withstands sideload forces up to 5% of rated cylinder

capacity without scoring • Overflow port functions as a stroke limiter• Interchangeable, hardened grooved saddles are standard• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending

cylinder life

Saddles

All CLS cylinders are equip-ped with bolt-on removablegrooved saddles. For information on optional

tilt saddles, see selection chart.

Page: 33

Heavy Lifting

For heavy lifting in remotelocations use the EnerpacAtlas gasoline poweredpump with an extended highflow performance.

Page: 90

H CLS-cylinders doing their job, synchronised lifting a complete fly-over for exact positioning.

Gauges

Minimize the risk of overloa-ding and ensure long, dependable servicefrom your equipment. Refer

to the System Components Section for afull range of gauges.

Page: 112

Low Height - High Tonnage

When low height with highforce is required, PancakeCylinders with locknut offerthe solution to lift the firstfew centimetres.

Page: 14

Lifting an Unbalanced Load?

See our ‘Yellow Pages’ for multi-cylinder set-ups.

Page: 98

31®

Single-Acting, High Tonnage Cylinders

CLS-502CLS-504CLS-506CLS-508CLS-5010CLS-5012CLS-1002CLS-1004CLS-1006CLS-1008CLS-10010CLS-10012CLS-1502CLS-1504CLS-1506CLS-1508CLS-15010CLS-15012CLS-2002CLS-2006CLS-20010CLS-2502CLS-2506CLS-25010CLS-3002CLS-3006CLS-30010CLS-4002CLS-4006CLS-40010CLS-5002CLS-5006CLS-50010CLS-6002CLS-6006CLS-60010CLS-8002CLS-8006CLS-80010CLS-10002CLS-10006CLS-100010

50(496)

100(929)

150(1390)

200(1859)

250(2562)

300(3193)

400(3919)

500(5118)

600(5983)

800(8238)

1000(10260)

CylinderCapacity

ton(kN)

ModelNumber

Oil Capacity

(cm3)

CollapsedHeight

(mm)

Weight

(kg)

CLSSeries

Capacity:

50-1000 tonStroke:


700 bar


Optional features

To add optional features to your cylinders, add the following suffixes to the end of the model number.

Example:•For standard CLS-5006 cylinder,

order: CLS-5006•For CLS-5006 cylinder with spring

return, order: CLS-5006 E001

Technical specifications for these features are available from Enerpac.

Spring return E001Base: no synthetic coating E009Base & plunger: no synthetic coating E011Without plunger wiper seal E012

1418232833382432404958664355698295

10866

10113690

137184137198258200275352289390489350465582549709870729921

1113

355709106414181773212766413271991265433183981993198629793972496559581330398966481832549691602281684311405280083991399836561096718278427712830213835882176452940873292198636643

70,970,970,970,970,970,9132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8

1176,91176,91176,91466,41466,41466,4

Cylinder Effective

Area

(cm2)

Stroke

(mm)

5010015020025030050

10015020025030050

10015020025030050

15025050

15025050

15025050

15025050

15025050

15025050

15025050

150250

128178228278327378143193243293342392165214264315365414193293392193293392235335435264365465294395495309410510354454555385484585

Higher Capacities

1500 and 2000 ton modelsare available on request.


Models above 150 ton are also available with standard stroke lengths of 100, 200 and 300 mm. Please contactEnerpac for ordering information.

CLS-Series, High Tonnage Cylinders

32

®



355709

1064141817732127664

13271991265433183981993

1986297939724965595813303989664818325496916022816843

1140528008399

139983656

10967182784277

12830213835882

17645294087329

2198636643

70,970,970,970,970,970,9

132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8

1176,91176,91176,91466,41466,41466,4

5010015020025030050100150200250300501001502002503005015025050150250501502505015025050150250501502505015025050150250

50(496)

100(929)

150(1390)

200(1859)

250(2562)

300(3193)

400(3919)

500(5118)

600(5983)

800(8238)

1000(10260)

CylinderCapacity

ton(kN)

Cylinder Effective

Area

(cm2)

ModelNumber

Oil Capacity

(cm3)


H

J K

B

A

L

F

D

E3/8"-18NPT

H

J K

B

A

L

F

D

30°

E3/8"-18NPT

CLS-300 to CLS-1000 models

CLS-50 to CLS-250 models

Stroke

(mm)

Couplers Included!


33®

Single-Acting, High Tonnage Cylinders

128178228278328378143193243293343393165215265315365415193293393193293393235335435265365465295395495310410510355455555385485585

178278378478578678193293392493593693215315415515615715243443643243443643285485685315515715345545745360560760405605805435635835

125125125125125125165165165165165165205205205205205205235235235275275275310310310350350350400400400430430430505505505560560560

95,095,095,095,095,095,0130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0183,9183,9183,9215,9215,9215,9241,0241,0241,0267,0267,0267,0305,1305,1305,1329,9329,9329,9387,1387,1387,1432,1432,1432,1

95,095,095,095,095,095,0130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0183,9183,9183,9215,9215,9215,9241,0241,0241,0267,0267,0267,0305,1305,1305,1329,9329,9329,9387,1387,1387,1432,1432,1432,1

303030303030303030303030393939393939505050505050595959707070808080858585

100100100110110110

717171717171717171717171130130130130130130130130130150150150139139139159159159179179179194194194224224224249249249

333333333333222222222222555555555555555555

121212121212121212121212252525252525252525252525252525252525252525252525252525252525

1418232833382432404958664355698295

10866

10113690

137184137198258200275352289390489350465582549709870729921

1113


ModelNumber

Weight

(kg)

ExtendedHeight

B(mm)

CylinderBore Dia.

E(mm)

PlungerDia.

F(mm)

Base toAdv. Port

H(mm)

CollapsedHeight

A(mm)

OutsideDia.

D(mm)

* Optional Tilt SaddleDepth ofPlunger

HoleL

(mm)

Saddle Protr.

from Plgr.K

(mm)

Saddle Height

K1(mm)

Saddle Model Number

StandardSaddle

Dia.J

(mm)

SaddleDia.J1

(mm)

K1

J10-5˚

Optional Tilt Saddle *CLSSeries

Capacity:

50-1000 tonStroke:


700 bar

717171717171717171717171

130130130130130130130130130150150150195195195225225225250250250275275275320320320360360360

242424242424242424242424202020202020202020212121757575858585919191969696

123123123136136136

CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-250CAT-250CAT-250CAT-300CAT-300CAT-300CAT-400CAT-400CAT-400CAT-500CAT-500CAT-500CAT-600CAT-600CAT-600CAT-800CAT-800CAT-800

CAT-1000CAT-1000CAT-1000

CLR-Series, High Tonnage Cylinders

34

®


H Shown from left to right: CLR-5006, CLR-100010, CLR-1006

H Three CLR cylinders laid in parallel push a pre-fabricated road underpass into posi-tion in a series of staged pushes.

Double-Acting Power Lifters

• Double-acting, hydraulic return• Safety valve in retract side of cylinder helps to prevent

damage in case of accidental over-pressurization• Special bearing design withstands sideload forces up to

5% of rated cylinder capacity• Interchangeable, hardened grooved saddles are standard• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending

cylinder life Gauges

Minimize the risk of overloading and ensure long,dependable service fromyour equipment. Refer to the


Page: 105

H Replacing adjustment rolls under a fly-overwith CLR cylinders, for controlled lifting andlowering.

Saddles

All CLR cylinders are equip-ped with bolt-on removablegrooved saddles. For information on optional

tilt saddles, see selection chart.

Page: 37

Safety Device

A pilot-operated check valve(V-42) can be insertedbetween cylinder and pump.This valve provides a safety

lock on the cylinder under load at anyposition and remote control for unlocking.

Page: 124



Page: 14

35®

Double-Acting, High Tonnage Cylinders

CLR-1002CLR-1004CLR-1006CLR-1008CLR-10010CLR-10012CLR-1502CLR-1504CLR-1506CLR-1508CLR-15010CLR-15012CLR-2002CLR-2006CLR-20010CLR-2502CLR-2506CLR-25010CLR-3002CLR-3006CLR-30010CLR-4002CLR-4006CLR-40010CLR-5002CLR-5006CLR-50010CLR-6002CLR-6006CLR-60010CLR-8002CLR-8006CLR-80010CLR-10002CLR-10006CLR-100010

132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,81176,91176,91176,91466,41466,41466,4

5010015020025030050

10015020025030050

15025050

15025050

15025050

15025050

15025050

15025050

15025050

150250

61,961,961,961,961,961,996,596,596,596,596,596,5126,5126,5126,5152,0152,0152,0151,1151,1151,1193,8193,8193,8248,4248,4248,4294,9294,9294,9387,7387,7387,7542,9542,9542,9

66413271991265433183981993

198629793972496559581328398466401831549291532281684311405280083991399836561096718278427412822213705885176542942373322199636660

310619929

123815481857483965

1448193024132895633

18983163760

22803800756

22673778969

2907484512423726621014754424737319395816969327158144

13573

172222272322372421192242292342391442210310410237337436350450549380480579424525625445545644495595694534635735

100(929)

150(1390)

200(1859)

250(2562)

300(3193)

400(3919)

500(5118)

600(5983)

800(8238)

1000(10265)

Stroke

(mm)

CylinderClass

ton(kN)


(cm2)

OilCapacity

(cm3)

ModelNumber

Push Pull Push Pull

CollapsedHeight

(mm)

CLRSeries

Capacity:

100-1000 tonStroke:


700 bar

RR-series

For loads below 100 tonEnerpac RR-cylinders are agood alternative.

Page: 26

Optional features

To add optional features toyour cylinders, add the following suffixes to the endof the model number.

Example:•For CLR-5006 cylinder with collar

threads and plunger threads, order:CLR-5006 E005


Collar threads E002Plunger threads E003Base mounting holes E004Collar+plunger threads E005Collar threads+base mounting holes E006Plunger threads+base mounting holes E007Collar+plunger threads E008+base mounting holesWithout plunger wiper seal E012


Higher Capacities



Models above 150 ton are also available with standard stroke lengths of 100, 200 and 300 mm. Please contactEnerpac for ordering information.

Pump Selection

A double-actingcylinder must be

powered by a pump with a 4-way valve.

Page: 53

36

®

Hydraulic Technology WorldwideCLR-Series, High Tonnage Cylinders


100

150

200

250

300

400

500

600

800

1000

Stroke

(mm)

CylinderCapacity

(ton)

Cylinder Effective

Area(cm2)

MaximumCylinderCapacity

(kN)

ModelNumber

OilCapacity

(cm3)


H

I

J K

B

A

L

F

D

E

3/8"-18NPT

30°

H

I

J K

B

A

F

D

L

E

3/8"-18NPT

30°

CLR-100 to CLR-250 models

CLR-300 to CLR-1000 models

Push Pull Push Pull Push Pull

50100150200250300501001502002503005015025050150250501502505015025050150250501502505015025050150250

132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8

1176,91176,91176,91466,41466,41466,4

929929929929929929

139013901390139013901390185918591859256225622562319331933193391939193919511851185118598359835983823882388238

102651026510265

433433433433433433675675675675675675885885885

106410641064105710571057135713571357173917391739206420642064271427142714380138013801

61,961,961,961,961,961,996,596,596,596,596,596,5

126,5126,5126,5152,0152,0152,0151,1151,1151,1193,8193,8193,8248,4248,4248,4294,9294,9294,9387,7387,7387,7542,9542,9542,9

66413271991265433183981993

1986297939724965595813283984664018315492915322816843

1140528008399

139983656

10967182784274

12822213705885

17654294237332

2199636660

310619929

123815481857483965

1448193024132895633

18983163760

22803800756

22673778969

2907484512423726621014754424737319395816969327158144

13573

Speed Chart

See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ section.

Page: 103

Couplers Included!

CR-400 couplers included onall models.Fits all HC-Series hoses.

37®

Double-Acting, High Tonnage Cylinders


ModelNumber

Weight

(kg)

Extend.Height

B(mm)

Cyl. Bore Dia.

E(mm)

PlungerDia.

F(mm)

Base to Advance

PortH

(mm)

Collaps.Height

A(mm)

OutsideDia.

D(mm)

Optional Tilt Saddle *SaddleProtr.

from Plgr.K

(mm)

StandardSaddle

Dia.J

(mm)

SaddleHeight

K1(mm)

Saddle ModelNumber

Top toRetract

PortI

(mm)

Saddle Dia.J1

(mm)

Depth ofPlunger

HoleL

(mm)

CLRSeries

Capacity:

100-1000 tonStroke:


700 barK1

J10-5˚

* Optional Tilt Saddle

CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-250CAT-250CAT-250CAT-300CAT-300CAT-300CAT-400CAT-400CAT-400CAT-500CAT-500CAT-500CAT-600CAT-600CAT-600CAT-800CAT-800CAT-800

CAT-1000CAT-1000CAT-1000

242424242424202020202020202020212121757575858585919191969696

123123123136136136

717171717171

100100100100100100100100100150150150195195195225225225250250250275275275320320320360360360

2733374450574757677787976792

117105141176204252299281342405411493575494586678759885

1019101211681325

131313131313252525252525252525252525252525252525252525252525252525252525

222222222222222222555555555555555555

717171717171100100100100100100100100100150150150139139139159159159179179179194194194224224224249249249

646464646464696969696969808080919191137137137148148148167167167173173173188188188198198198

303030303030393939393939505050595959595959707070808080858585100100100110110110

95,095,095,095,095,095,0114,0114,0114,0114,0114,0114,0133,1133,1133,1165,1165,1165,1197,1197,1197,1215,9215,9215,9247,9247,9247,9267,0267,0267,0317,0317,0317,0342,9342,9342,9

130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0183,9183,9183,9215,9215,9215,9241,0241,0241,0267,0267,0267,0305,1305,1305,1329,9329,9329,9387,1387,1387,1432,1432,1432,1

165165165165165165205205205205205205235235235275275275310310310350350350400400400430430430505505505560560560

222322422522622722242342442542642742260460660287487687400600800430630830475675875495695895545745945585785985

172222272322372422192242292342392442210310410237337437350450550380480580425525625445545645495595695535635735

CLL-Series, Lock Nut Cylinders

38

®


H For this curved bridge, CLL-cylinders were used to support the concrete beams, tolevel the pierhead and to place 4000 ton slide bearings between pier and pierhead.

H CLL cylinder, mechanically locked, after posi-tioning the curved bridge.

H Shown from left to right: CLL-5010, CLL-502, CLL-1006

• Single-acting, load return• Safety Lock Nut for mechanical load holding• Special synthetic coating for improved corrosion resistan-

ce and lower friction for smoother operation• Withstands sideload forces up to 5% of rated cylinder

capacity without scoring• Overflow port functions as a stroke limiter• Interchangeable, hardened grooved saddles are standard• Plunger wiper reduces contamination, extending

cylinder life

To Secure LoadsMechanically

Saddles

All CLL cylinders are equip-ped with bolt-on removablegrooved saddles. For information on optional

tilt saddles, see selection chart at next page.

Page: 41

Gauges

Minimize the risk of overloa-ding and ensure long, dependable servicefrom your equipment. Refer

to the System Components Section for afull range of gauges.

Page: 105



Page: 14

39®

Single-Acting, Lock Nut Cylinders

CLL-502CLL-504CLL-506CLL-508CLL-5010CLL-5012CLL-1002CLL-1004CLL-1006CLL-1008CLL-10010CLL-10012CLL-1502CLL-1504CLL-1506CLL-1508CLL-15010CLL-15012CLL-2002CLL-2006CLL-20010CLL-2502CLL-2506CLL-25010CLL-3002CLL-3006CLL-30010CLL-4002CLL-4006CLL-40010CLL-5002CLL-5006CLL-50010CLL-6002CLL-6006CLL-60010CLL-8002CLL-8006CLL-80010CLL-10002CLL-10006CLL-100010

50(496)

100(929)

150(1390)

200(1859)

250(2562)

300(3193)

400(3919)

500(5118)

600(5983)

800(8238)

1000(10260)

Stroke

(mm)

CylinderCapacity

ton(kN)

Cylinder Effective

Area

(cm2)

ModelNumber

Oil Capacity

(cm3)

Collapsed Height

(mm)

Weight

(kg)

CLLSeries

Capacity:

50-1000 tonStroke:


700 bar


Optional features

To add optional features toyour cylinders, add the following suffixes to the endof the model number.

Example:•For standard CLL-5006 cylinder,

order: CLL-5006•For CLL-5006 cylinder with spring

return, order: CLL-5006 E001


Spring return E001Base: no synthetic coating E009Base & plunger: no syntheticcoating E011Without plunger wiper seal E012

15202530354030394856647353667892

10411783

117152116162210173233293250327402367466567446562679709870

1029949

11411333

355709106414181773212766413271991265433183981993198629793972496559581330398966481832549691602281684311405280083991399836531095918265427712830213835882176452940873292198636643

70,970,970,970,970,970,9132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8

1176,91176,91176,91466,41466,41466,4

5010015020025030050

10015020025030050

10015020025030050

15025050

15025050

15025050

15025050

15025050

15025050

15025050

150250

164214264314364414187237287337387437209259309359409459243343443249349449295395495335435535375475575395495595455555655495595695

Higher Capacities



Models above 150 ton are also availablewith standard stroke lengths of 100, 200and 300 mm. Please contact Enerpac forordering information.

CLL-Series, Lock Nut Cylinders

40

®



50(496)

100(929)

150(1390)

200(1859)

250(2562)

300(3193)

400(3919)

500(5118)

600(5983)

800(8238)

1000(10260)

Stroke

(mm)

CylinderCapacity

ton(kN)

Cylinder Effective

Area

(cm2)

ModelNumber

Oil Capacity

(cm3)


H

S

J K

B

A

L

F

D

E

3/8"-18NPT

H

S

J K

B

A

L

F

D

E

30°

3/8"-18NPT

CLL-300 to CLL-1000 models

CLL-50 to CLL-250 models

70,970,970,970,970,970,9

132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8

1176,91176,91176,91466,41466,41466,4

501001502002503005010015020025030050100150200250300501502505015025050150250501502505015025050150250505025050150250

355709

1064141817732127664

13271991265433183981993

1986297939724965595813303989664818325496916022816843

1140528008399

139983653

10959182654277

12830213835882

17645294087329

2198636643

Couplers Included!

CR-400 couplers included onall models.Fits all HC-Series hoses.

41

Single-Acting, Lock Nut Cylinders

®


ModelNumber

Weight

(kg)

Ext. Height

B(mm)

Cyl.Bore Dia.

E(mm)

PlungerDia.

(threaded)F

(mm)

Base toAdv. Port

H(mm)

Coll.Height

A(mm)

Outs. Dia.

D(mm)

* Optional Tilt SaddleDepth ofPlunger

HoleL

(mm)

Saddle Protr.

from Plgr.K

(mm)

Saddle Height

K1(mm)

Saddle ModelNumber

StandardSaddle

Dia.J

(mm)

Saddle Dia.J1

(mm)

Lock-nut

HeightS

(mm)

CLLSeries

K1

J10-5˚

Optional Tilt Saddle *

717171717171717171717171

130130130130130130130130130150150150195195195225225225250250250275275275320320320360360360

15202530354030394856647353667892

10411783

117152116162210173233293250327402367466567446562679709870

1029949

11411333

363636363636444444444444444444444444505050565656606060707070808080858585

100100100110110110

242424242424242424242424202020202020202020212121757575858585919191969696

123123123136136136

CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-250CAT-250CAT-250CAT-300CAT-300CAT-300CAT-400CAT-400CAT-400CAT-500CAT-500CAT-500CAT-600CAT-600CAT-600CAT-800CAT-800CAT-800

CAT-1000CAT-1000CAT-1000

303030303030303030303030393939393939505050505050595959707070808080858585100100100110110110

Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4

Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 184 x 6Tr 184 x 6Tr 184 x 6Tr 216 x 6Tr 216 x 6Tr 216 x 6Tr 241 x 6Tr 241 x 6Tr 241 x 6Tr 266 x 6Tr 266 x 6Tr 266 x 6Tr 305 x 6Tr 305 x 6Tr 305 x 6Tr 330 x 6Tr 330 x 6Tr 330 x 6Tr 387 x 6Tr 387 x 6Tr 387 x 6Tr 432 x 6Tr 432 x 6Tr 432 x 6

717171717171717171717171130130130130130130130130130150150150139139139159159159179179179194194194224224224249249249

333333333333222222222222555555555555555555

121212121212121212121212252525252525252525252525252525252525252525252525252525252525

125125125125125125165165165165165165205205205205205205235235235275275275310310310350350350400400400430430430505505505560560560

214314414514614714237337437537637737259359459559659759293493693299499699345545745385585785425625825445645845505705905545745945

164214264314364414187237287337387437209259309359409459243343443249349449295395495335435535375475575395495595455555655495595695

95,095,095,095,095,095,0

130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0184,0184,0184,0216,0216,0216,0241,0241,0241,0267,0267,0267,0305,0305,0305,0330,0330,0330,0387,0387,0387,0432,0432,0432,0

Capacity:

50-1000 tonStroke:


700 bar

Synchronized Lift & Lowering Systems

42

• Digital technology controls automatic synchronization ofup to 8 cylinders, parallel set-ups allow for even more lif-ting points

• Can effectively and efficiently be operated by one person,computer control offers all features at a friendly interface

• High accuracy (+/- 1 mm) sensors are attached to the loadto ensure accurate positional control

• Utilizes standard hydraulic components, allowing use ofyour present equipment

ComputerControlled Lifting &Lowering Systems:

A Marriage betweenHydraulics andElectronics

H Positioning of two enormous vessels, using a combination of stage and synchronized lifting in Malaysia.

Split Flow Pumps

For applications that do notrequire the high accuracy ofelectronic synchronouslifting, a split flow pump may

provide the cost effective solution.

Page: 80

F Split-flowpump dia-gram

F Here a bridge deck is being re-leveled aftermajor maintenance work.

H Even positioning and leveling large machiningcenters benefits from synchronized techniques.

®


®

a

d

b

c g

e

f

h

Applications that mayrequire synchronous con-trol:

•Bridge lifting•Lifting and lowering of

heavy equipment•Shiplifts•Die separation•Structural testing•Lifting and weight

measuring of oil platforms•Synchronized pressing•Horizontal load shifting

The possible applications of thesystem are to numerous to show inthis catalog. Synchronized lifting,lowering and positioning usingcomputer technology and highpressure hydraulics has becomepopular in many industries aroundthe globe. Basically the lifting orlowering capacity of the system isunlimited. By adding more or largerhydraulic cylinders to the setup, thesystem will allow jobs of 50.000 tonor even more.

Synchronized Lifting & Lowering Systems

43®

SLSeries

•Split Flow pumps equip-ped with solenoid valvesprovide directional controlof lifting cylinders

•Sensors at each liftingpoint send data to thecontrol device

•Best choice for heavy lif-ting jobs: RR- or CLR-Series,Double-Acting cylinders

Both cylinder seriesfeature built-in safetyvalve and baked enamelanti-corrosion finish

PowerSource

ElectronicSensors

& Cylinders

•Microprocessor basedcontrol unit or personalcomputer with user-friendly interface

•Receives data fromelectronic sensors, loca-ted at each lifting point

•Distributes output con-trol signals from control-ler to cylinder controlvalves

ControlDevices

H TYPICAL SYSTEM COMPONENTS

Call Enerpac!

Contact your distributor or theEnerpac office nearest to you for

advice and technical assistance in thelayout of your ideal Synchronous Lifting& Lowering System.

a Hydraulic Cylinder

b Electronic sensor

c Valve

d Pump Unit

e Personal computer

f Electronic cables

g Hydraulic hoses

h Valves

5095

140200

155168155155

498933

13861859

103435668885

Lifting Capacity

(ton)

Stroke

(mm)

Maximum Cylinder Capacity

(kN)

Push Pull

Model Number

BLS-Series, Stage-Lift Cylinders

44

• Double-acting cylinder with solid plunger design• Simple three-stage operation• Swivel saddle and large support attachments for stability• Anti-rotation device• Built-in overload protection

H Shown: BLS-506 in three lifting positions.

Split Flow Pumps

Multi-cylinder arrangementscan be powered and fullysynchronised by Enerpacsplit-flow pumps.

Page: 80

H Typical stage-lift application using a custombuilt Enerpac system to lift this pressure vessel.

The Most SimpleSolution to HigherLifting Jobs

To avoid overload situ-ations, cylinders shouldbe used within 80% oftheir maximum capacity.

80%max

Lifting height

Stage-lift cylinders overcome the usual limitation of lift height

imposed by the cylinder’s plunger stroke length. Large objects, such as oil tanks, can belifted, held and lowered for maintenancewithout sending for a crane.

BLS-506BLS-1006BLS-1506BLS-2006

®


Model NumberCylinder Effective Area

(cm2)

Oil Capacity

(cm3)

A

408448472512

B

563616624664

C

322346370392

D

127175203248

F

79105114133

H

577694

102

I

36233937

J

5071

130130

J1

240320230270

K

515670475550

170231322373

Weight

(kg)Push Pull Push Pull

71,2133,3198,1265,6

21,562,295,4

126,5

1111223830903984

335104514881898

Dimensions (mm)

BLS-506BLS-1006BLS-1506BLS-2006

Double-Acting, Stage-Lift Cylinders

45®

BLSSeries

Capacity:

50-200 tonStroke:


700 bar

1 The Stage Lift cylinder is placed ona solid support under the load(retracted plunger).

2 Plunger extends, lifting the load andgiving clearance to insert two outerblocks under the spreading plate.

3 Plunger retracts, giving clearance toposition the central blocks whichwill support the plunger plate for thenext extension.

4 Plunger extends, lifting the load andgiving clearance to insert two newblocks, placed crosswise under thespreading plate.

* Support blocksare not suppliedby Enerpac.

5095

140200

565720500575

140150140140

120160115135

Azobe WoodAzobe Wood

Solid AluminiumSolid Aluminium

For Lifting Capacity

(ton)

Block Dimensions (mm)

Support Block Material *

KJ1L

J1K

0-5°

J

A

C

B

H

I

M

N

3/8"-18NPT

D

F

L M N

46

®


ST-132132(1174)

300 12

RequiredStrandsat Full

Capacity

(not included)*

System Pressure

at FullCapacity

(bar)

Lifting Capacity

ton (kN)

ModelNumber

* System uses 15 mm diameter 270 Grade pre-stressing strand.

ST-Serie, Strand Lift System

• 132 ton capacity per cluster, capacity can be increased byusing more clusters

• Positive hydraulic seating of strand chucks

• Ideal for lifting or lowering loads over long distances

• Loads can be locked or secured at any stage

• Maximum lifting capability determined by strand capacity(not by hydraulic capacity)

From the Leader inHeavy Lifting Technology

Strand Lift Pump PST-8418

Specifically designed tooperate the ST-132 cluster.One pump can control up tofour clusters.

Providing independent, manual controlof each cluster.

Lifting Eye SLEA-200

Provides the interfacebetween the ST-132 clusterand the load. Includes 12 SC-22 chucks.

Weight: 309 kg

Strand Chucks SC-11

Twenty-four SC-11 chucksare included with the ST-132. Spare chucks canbe purchased under these

numbers.

H To lift a 112 ton boring machine in a deep tunnel project, workers thread strandthrough the ST-132 strand lift cluster. Due to the lift height required and the low ceiling, the ST-132 Strand Lift was the only solution.

Lifting in Unusual Situations

When loads need to be liftedor lowered in tight areas or insituations where overheadclearance is limited, Enerpac

offers this economical alternative to traditional rigging equipment.

H Shown Strand Lift Cluster ST-132

47®

Strand Lift System

STSeries

Rated Capacity per Cluster:

132 tonOperating Pressure at Rated Load:

300 bar

88066014031073

1 cluster 6,72 clusters 5,53 clusters 4,34 clusters 3,1

7210144202163028841

Oil Capacity

(cm3)

Cluster HeightA

Cluster Width

B

Weight

(kg)

Lifting rate(using the

PST-8418 pump)

(m/hr)

A

B

Hoses

To maintain the integrity ofyour system, demand onlygenuine Enerpac safetyhoses. Long lengths

available for strand lift systems.

Page: 106

1 52 3 4

Hydraulic seating cylinder. Activates chucksto lock strand.

Ø 15 mm 270 grade pre-stressing strand,available worldwide, passes through top and bottom plates

Strand chucks

Top plate

Lifting cylinder

Hydraulic seating cylinder. Activates chucksto lock strand

Strand chucks

Bottom plate

Retracted Extended

Dimensions (mm)

Lifting Sequence1 Chucks lock strands in bottom plate2 Chucks lock strands in top plate3 Lifting load with top plate4 Chucks lock strand in bottom plate5 Top plate being retracted to repeat

sequence

ClampedUnclamped

JHA/JTASeries

48

®

Hydraulic Technology WorldwideSaf-T-Lite® Aluminium JacksH Shown from left to right: JHA-356, JHA-73, JTA-76

• All-directional operation on 7, 15 and 35 ton conventional models

• Two-directional operation (vertical and horizontal) on 75 and 150 ton conventional models

• Internal relief valve to prevent overloading• Machined flat front and bottom surfaces permit flush

alignment in tight corners• Includes pumping handle

JHA-73JHA-156JHA-356JHA-756JHA-1506JTA-76JTA-176JTA-356

7 (62)

15 (133)

35 (311)

75 (667)

150 (1335)

7 (62)

17 (151)

35 (311)

Conven-tional Jack

Toe-LiftJack

9,620,345,6102,6197,920,345,6102,6

133247257285327319360422

209401412439482473515576

73 x 15892 x 238

117 x 254174 x 325241 x 40792 x 295

117 x 333174 x 422

30,241,454,1

114,3158,841,454,182,6

SingleSingleSingleSingle

2-SpeedSingleSingleSingle

5,013,218,142,695,326,339,095,3

–––––

505065

76153155153155153155153

Jack Capacity

ton (kN)

ModelNumber

Stroke

(mm)

JackEffective

Area(cm2)

CollapsedHeight

(mm)

ExtendedHeight

(mm)

OutsideDimensions

(L x W)(mm)

PlungerDiameter

(mm)

Toe Height

(mm)

Pump Speed

Weight

(kg)

Style

Capacity:

7-150 tonStroke:


700 bar

Toe-Lift and Load Skates

See the tool section in thiscatalog for more toe-lifts andload skates for easy trans-portation.

Page: 169

Enerpac high quality aluminium jacks are a great tool for precise positioning

out in the field. E

49®

Premium Steel JacksH Shown from left to right: JH-506, JH-3, JH-5, JHL-1.5, JH-12

JH-1.5JHL-1.5JH-3JHL-3JH-5JH-8JH-12JH-20JH-306JH-506JH-1006

1,5 (13)

3 (26)

5 (44)

8 (71)

12 (106)

20 (178)

30 (267)

50 (445)

100 (890)

131457149508158158130165155154153

4,16,45,9

11,87,78,6

11,819,126,840,874,4

54–

68–

858585––––

190551222668241241225279254260287

92 x 12792 x 127

108 x 139108 x 139122 x 171134 x 196146 x 146134 x 16095 x 242

127 x 258181 x 328

SingleSingleSingleSingleSingleSingleSingleSingleSingle

2-Speed2-Speed

Jack Capacity

ton (kN)

ModelNumber

Stroke

(mm)

Additional Screw

Extension(mm)

CollapsedHeight

(mm)

OutsideDimensions

L x W(mm)

PumpSpeed

Weight

(kg)

Capacity:

1,5-100 tonStroke:


700 bar

Screw Feature

Heat treated, adjustableextension screw with cleatedsaddle on select JH modelshelps adjusting and prevents slipping.

JH/JHLSeries

Premium Industrial Line• Automatic by-pass port to prevent over-extension • Long stroke versions available (JHL-1.5, JHL-3)• Pump handle included

On 30, 50 and 100 ton models: • Chrome plated plungers• Machined flat front and bottom surfaces permit flush align-

ment in tight corners• Internal relief valve to prevent overloading

H Creativity is the limit with EnerpacAluminium Jacks.

50

®

Hydraulic Technology WorldwideSingle-Acting Cylinder-Pump SetsH Shown cylinder-pump set: SCR-1010H

• Optimum match of individualcomponents

• All sets are ready-for-use• Sets include 1,8 m safety hose,

calibrated gauge with gaugeadaptor

• All hand pumps are two-speed

Single-Acting, General Purpose Cylinders:

For maximum versatility.RC-Series

Single-Acting, Hollow Cylinders:

For pushing and pulling applications.RCH-Series

Single-Acting, Low Height Cylinders:

Ideal where space is restricted.RCS-Series

Pull Cylinders:

For use with subassemblies and modules.BRP-Series

RC-55RC-102RC-106

RC-1010RC-154RC-156RC-252RC-254RC-256

RC-2514RC-506

RC-1006RCS-101RCS-201RCS-302RCS-502

RCS-1002RCH-121RCH-202RCH-302RCH-603

RCH-1003BRP-106CBRP-106LBRP-302BRP-306BRP-606

5 (45)

10 (101)

15 (142)

25 (232)

50 (498)

95 (933)

10 (101)

20 (201)

30 (295)

45 (435)

90 (887)

13 (125)

20 (215)

30 (326)

60 (576)

95 (933)

10 (105)

30 (326)

50 (505)

12754

15625710115250

10215836215916838456260574249647676

15115163

155152

2151212473492002711652152734762823578898

117122141120162178247254587541

10331085719

Set Capacityton (kN)

CollapsedHeight(mm)

Stroke

(mm)

CylinderModel

Number

The Quickest andEasiest Way to StartWorking Right Away

H1 Cylinder Selection (See Cylinder Section of this catalog for full product descriptions)

Page: 18

Page: 20

Page: 16

Speed ChartSee the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ section.

Page: 103

Page: 8

® 51

Single-Acting Cylinder-Pump Sets

SCR-55H––––––––––––––––

SCH-121H–––––––––

–SCR-102HSCR-106H

SCR-1010HSCR-154HSCR-156HSCR-252HSCR-254HSCR-256H

–––

SCL-101HSCL-201HSCL-302HSCL-502H

––

SCH-202HSCH-302H

––

SCP-106CHSCP-106LHSCP-302H

––

–––––––––

SCR-2514HSCR-506H

–––––

SCL-1002H–––

SCH-603HSCH-1003H

–––

SCP-306HSCP-606H

–––––––––––

SCR-1006H–––––––––––––––

–SCR-102BSCR-106B

SCR-1010BSCR-154BSCR-156BSCR-252BSCR-254BSCR-256B

–––

SCL-101BSCL-201BSCL-302B

–––

SCH-202BSCH-302B

–––––––

–SCR-102ASCR-106A

SCR-1010ASCR-154ASCR-156ASCR-252ASCR-254ASCR-256A

SCR-2514ASCR-506A

–SCL-101ASCL-201ASCL-302ASCL-502A

––

SCH-202ASCH-302ASCH-603A

––––––

HC-7206QHC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HB-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206

Hand Pump

P-142

Hand Pump

P-392

Hand Pump

P-80

Hand Pump

P-462

WalkPac™Battery Pump* PBM-12001E

Turbo Air Pump

PAT-1102N

HoseModel

Number

GP-10SGF-10SGF-10SGF-10SGP-10SGP-10SGF-20SGF-20SGF-20SGF-20SGF-50SGF-871GF-10SGF-230GF-230GF-510GF-510GF-120

GF-813SGF-813SGF-813SGP-10SGP-10SGP-10SGP-10SGP-10SGP-10S

GaugeModel

Number

GA-4GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-4GA-2GA-3GA-2GA-2GA-2GA-2GA-2GA-2GA-2

GaugeAdaptor

Model Nr.

H2 Pump selection (See Pump Section of this catalog for full product descriptions) Accessories included

SELECTION EXAMPLE

Selected cylinder:

• RC-106, Single-Acting cylinder with 156 mm stroke

Selected pump:

•P-392, Light weight hand pump

Set model number:

• SCR-106H

Included:•HC-7206 hose•GF-10S gauge •GA-2 adaptor

SCSeries

Capacity:

5-95 tonStroke:


700 bar

SET SELECTION:

E1 Select the cylinder

E2 Select the pump

E3 Find the set modelnumber in the bluematrix

* All WalkPac™ sets include HC-7206C hose.

®


1/4"

-18

G1/

4"

315

347

217 13

8

PRES

S

SE

3/8"-18NPTF

254178 8

38

176203

G1/4"

217

138

Enerpac Hydraulic Pumps

ENERPAC hydraulic pumps are

available in over 1000 different

configurations. Whatever your

high-pressure pump needs are, you

will find an Enerpac pump suited

to the application.

Featuring Hand, Battery, Electric,

Air and Gasoline powered models,

plus multiple reservoir and valve

configurations, Enerpac offers the

most comprehensive pump line

available.

��

��

��

��

��

��

��

��

��

��

��

iiiPump SelectionFor help in selecting

the correct pump for your application,

please review our ‘Yellow Pages’.

If you require further assistance,contact the Enerpac office

located near you.Page: 96

52

® 53

15

Hydraulic Pumps Section Overview

2,5

7,4

3,3

1,0

0,6

3,8

40

5,5

40

80

5,0

5,0

40

40

95

2,47

4,75

25,40

2,49

0,16

0,32

0,98

0,27

1,52

8,0

5,0

0,13

1,2

1,64

5,7

Light Weight Hand Pumps

Steel Hand Pumps

High Flow Hand Pumps

Ultra-High Pressure Hand Pumps

WalkPac™Battery Powered Pumps

Economy SeriesCompact and Portable

Titan SeriesHigh Performance, Intermittent Use

Submerged SeriesPowerful and Low-Noise

Hushh, 2000, 3000 and 5000 SeriesThe Industrial Standard

8000- and 9000-SeriesHigh Flow / Split Flow Pumps

Air Hydraulic PumpsThe Maximum Flow Series Air Pump

Turbo and Air Hydraulic PumpsSingle and Twin-Air

Air Pumps - Modular Air SeriesModular Design

Atlas SeriesYour Gasoline Pump Solution

800 SeriesFor the Largest Jobs

54 E

56 E

58 E

60 E

62 E

64 E

66 E

70 E

74 E

80 E

82 E

84 E

88 E

90 E

92 E

P

P

P/PL

P/11

PB

PU

PU

PE

PE

PP

PA

PA

PA

PG

EG

Power Source

MaximumReservoirCapacity

(litres)

Max.Flow at RatedPressure

(l/min)

Pump Types Series Page

Gas

olin

eA

irE

lect

ric

Bat

tery

Han

d

(cm3/stroke)

(cm3/stroke)

(cm3/stroke)

M

M

E

E

E

E

E

E

54

®

Hydraulic Technology WorldwideLight Weight Hand Pumps

• Light weight and compact design• Durable glass-filled nylon reservoir and nylon

encapsulated aluminium pump base for maximum corrosion resistance

• Two-speed operation reduces handle strokes by as much as 78% over single speed pumps

• Lower handle effort to minimize operator fatigue • Integral 4-way valve on P-842 for operation of double-

acting cylinders• Handle lock and light weight construction for easy carrying• Large oil capacities to power a wide range of cylinders

or tools• Non-conductive fiberglass handle for operator safety• Internal pressure relief valve for overload protection

H Pumps shown, from top to bottom: P-802, P-842, P-202, P-142

32790132790190125402540

N/AN/A1313132727

700700700700700700700

Single-Speed

Two-Speed

Usable OilCapacity

(cm3)

PumpType

Pressure Rating**

(bar)

ModelNumber

N/AN/A3,623,62

11,2639,3339,33

0,902,470,900,902,472,472,47

Oil Displacementper Stroke

(cm3)

P-141P-391P-142*P-202P-392*P-802P-842

Exclusively fromEnerpac

32,738,635,428,642,243,143,1

Max.HandleEffort

(kg)

* Available as set, see note on next page.** Contact Enerpac for applications where operating pressure is less than 10% of

pressure rating.

H P-392 in action with RSM-500 cylinders.

Tank Kits:

When a return-to-tank portis required, the Tank Kitsprovide a 7/16”-20 port at therear of the reservoir.

1st stage 1st stage 2nd stage 2nd stage

Speed Chart

To determine how a specificpump will operate your cylinder,

see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.

Page: 103

Cylinder Matching Chart

For help in selecting the correcthand pump for your application,

please refer to the Cylinder MatchingChart located in the ‘Yellow Pages’.

Page: 96

PC-20PC-25

Fits P-141, P-142Fits P-202, P-391, P-392

® 55

E

G

PN

J

D A C

M

L

H

38˚ - P-141, P-142, P-20250˚ - P-391, P-392

B

S

E

Q

PN

G

J

D A C

S

L

H

50˚

B

J

D A C

S

L

H

50˚

B

E

PN

Q

G

Light Weight Hand Pumps

PistonStroke

(mm)

Weight

(kg)

336533336509533552552

ModelNumber

P-141P-391P-142*P-202P-392*P-802P-842

28362836364545

8599858599133133

28332828333520

1/4"- 18 NPT

3/8"- 18 NPT

1/4"- 18 NPT

1/4"- 18 NPT

3/8"- 18 NPT

3/8"- 18 NPT

3/8"- 18 NPT

319522319400522527527

19301919305555

143177143144177228228

–16–

1616––

951209595

120120120

80–

80––

152152

7–7––

1010

–––––

3536

185344185344344337337

A B C D E G H J L M N P SQ

12,725,412,712,725,425,425,4

2,04,12,03,44,18,2

10,0

Aluminium Reservoir

For applications wherecomposite reservoirs maynot be suitable, the P-392AL utilizes an extruded

aluminium reservoir. Also included is asecond handle for two-hand use.

Hoses

Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,

specify only genuine Enerpac hydraulic hoses.

Page: 106

PSeries

Reservoir Capacity:

327-2540 cm3

Flow at Rated Pressure:

0,90-2,47 cm3/strokeOperating Pressure:

700 bar

Dimensions (mm)

Release valve

Valve Control

Release Valve

Pump and Cylinder sets

All Pumps markedwith an * are available

as sets (pump, cylinder, gauge,couplers and hose) for your ordering convenience.

Page: 50

P-141, P-142, P-202, P-391, P-392

P-802

P-842

Gauges


System Components section for a full range of gauges.

Page: 105

56

®

Hydraulic Technology WorldwideSteel Hand Pumps

• Two-speed operation for reduced operator fatigue (except P-39)

• 4-way valving on the P-84 and P-464 for operation of double-acting cylinders

• External load release valve on remaining models for single-acting cylinder operation

• Internal pressure relief valves for overload protection • Large oil capacities to power a wide range of cylinders

or tools

H Shown from left to right: P-84, P-80, P-462, P-39

N/A2525251414

Two-Speed

Single

Usable OilCapacity

(cm3)

PumpType

Pressure Rating**

(bar)

ModelNumber

N/A16,2216,2216,22

126,20126,20


(cm3)

P-39P-80*P-801P-84P-462*P-464

504747474949

Max.HandleEffort

(kg)

65522004080220074237423

H In the absense of a power supply, the P-80 HandPump offers a powerful solution.

2,622,462,462,464,754,75

700700700700700700

1st stage 1st stage2nd stage 2nd stage

Steel - The Solutionfor Tough Jobs

Two Speed

Recommended for applicationswhere cylinder plunger must

advance rapidly to load contact, andapplications where greater oil capacitiesare required, such as multiple cylinderhook-ups.

* Available as a set, see note on next page.** Contact Enerpac for applications where operating pressure is less than 10% of

pressure rating.

Gauges



Page: 105

4-Way Control Valve

P-84 and P-464 feature aVM-4 manual 4-way controlvalve, designed for use withone double-acting or two

single-acting cylinders. For system Set-up information:

Page: 98

Foot Pump Conversion Kits

Convert your P-39 to footpower with the PC-10 Kit.Includes instructions foreasy conversion.

® 57

Steel Hand Pumps

L

D A

H

50˚

J

C

3/8"-18NPT

B MF

SP

R

E

N

Q

T

AB

ME

3/8"-18NPT

JH

74˚

PD

N

C S

QR L

PSeries

Reservoir Capacity:

655-7423 cm3


2,46-4,75 cm3/strokeMaximum Operating Pressure:

700 bar

P-39P-80*P-801P-84P-462*P-464

PistonStroke

(mm)

Weight

(kg)

520539782539308308

ModelNumber

33252525

163163

38444444320320

325454–

195195

302929292525

133146146146650650

–––

64––

464527772527671671

119174174174270270

6519–

19175175

–1211211219292

–––

38–

89

–212143–

68

–888

8080

–676767––

393425659425210210

A B C D E F H J L M N P Q R S T

5,910,914,113,227,727,7

20,625,425,425,438,138,1

Dimensions (mm)

P-80, P-801, P-84

P-462, P-464

Pump and Cylinder sets

P-80 and P-462also available as set

(pump, cylinder, gauge,couplers and hose) for your ordering convenience.

Page: 50

Cylinder Matching Chart

For help in selecting the correcthand pump for your application,

please refer to the Cylinder MatchingChart located in the ‘Yellow Pages’.

Page: 96

P-84 only

P-39

E

NAD C

B M

L

40˚

HJ

3/8"-18NPT

Speed Chart



Page: 103

58

®


P-series• Bi-directional pumping on the P-25 and P-50 allows

operation on both handle strokes• External load-release valve • Internal pressure-relief valve for overload protection

PL-series• Pump available with reservoir or without reservoir for

flange mounting on separate tank• Pump handle can be used horizontally and vertically• Interchangeable pump bodies due to same

mounting pattern• Pumps without reservoir include reservoir gasket• Lightweight and compact design

H Shown from left to right: PL-3007R, P-51, P-18, P-25

Low Pressure / High Flow Hand Pumps

When a High FlowCounts

Single-Speed

Single-Speed

Single-Speed

Usable OilCapacity

(cm3)

PumpType

Pressure Rating

(bar)

ModelNumber

OilDisplace-ment perStroke(cm3)

P-18P-25P-50P-51PL-3007RPL-2509RPL-2011RPL-1317RPL-1025RPL-3007FPL-2509FPL-2011FPL-1317FPL-1025F

2627272740404040404040404040

Max.HandleEffort

(kg)

29532773277819

18001800180018001800

*****

2,629,504,754,107,009,10

11,3017,6025,407,009,10

11,3017,6025,40

20017535020030025020013090

30025020013090

Foot Pump Conversion Kits

Convert your P-18 to footpower with the PC-10 Kit.Includes instructions foreasy conversion.

Gauges



Page: 105

Application

The pump handle on PL-series pumps can be used invertical and horizontalposition.

* Requires the use of an external reservoir

��

H The PL-3007F mounted on a 20 litres reservoir.

® 59

P-18P-25P-50P-51PL-3007RPL-2509RPL-2011RPL-1317RPL-1025RPL-3007FPL-2509FPL-2011FPL-1317FPL-1025F

P/PLSeries

Reservoir Capacity:

295-3280 cm3



90-350 bar

PistonStroke

(mm)

Weight

(kg)

ModelNumber

21015215252

275275275275275

–––––

32717317392

159159159159159159159159159159

3315215218186868686866262626262

38240240200135135135135135135135135135135

48––

57134134134134134

–––––

––––

64646464646464646464

216––

610237237237237237237237237237237

30––

29203203203203203203203203203203

111684684160532532532532532532532532532532

13200200129

––––––––––

133–––

70707070707070707070

––––

41414141414141414141

––––

36363636363636363636

––––

12121212121212121212

–10109

11111111111111111111

––––

13131313131313131313

5,016,316,85,46,36,36,36,36,34,34,34,34,34,3

A B C D E F H J L M N P Q R S T

20,638,138,125,436,036,036,036,036,036,036,036,036,036,0

Dimensions (mm)

PL-serie F mounting dimensions (mm)

1/4"-18NPT

34˚

C

S

D

M

L

90˚

AB

L

E

J42˚

H

CD

1/4"-18NPT

3/8"-18NPT

S

AB

M

180˚

P-25, P-50

P-51

PN

Q R

JH

L45˚ 28˚

G1/4"

FS

CT

D B

PL-series F

P

EN

Q RA

JH

L45˚ 28˚

G1/4"

F

S

CT

D B

PL-series R

P-18

E

NAD C

B M

L

40˚

HJ

3/8"-18NPT

5053

47

48

43 24

4012

M8 ø2221

ø13

21

Low Pressure / High Flow Hand Pumps

60

®


Cone Seal

Stainless Steel HighPressure fittingsseal on a ‘cone’ surface and do notrequire pipe sealer.The Gland Nutholds the sleeveand tubing tightagainst the conesurface to provide a2800 bar seal.

• Two-speed operation on the P-2282 allows for faster filloperation, reducing cycle times for many testing applications

• 303 Stainless steel construction on the 11-100 and 11-400 models enable use with many different fluids, suchas distilled water, alcohol, diesters, silicones, soluble oilsand petroleum

• Large release knob for improved control of pressurerelease

• Outlet ports are 3/4"-16 cone for 2800 bar rating • 3/8" NPT adaptor included with P-2282, for applications

under 700 bar

H Shown from left to right: 11-100, P-2282


983737737

2800700

2800

13N/A N/A

Two-Speed

Single-Speed

Usable OilCapacity

(cm3)

PumpType

PressureRating*

(bar)

ModelNumber

16,22N/AN/A

0,612,490,62


(cm3)

P-228211-10011-400

48,154,454,4

Max.HandleEffort

(kg)1st

stage1st

stage2nd

stage2nd

stage

Sleeve

Stainless Steel Tubing

Body

Bleed HoleGland Nut

2-Way Shut-Off Valve 72-750

For 2800 bar applicationsrequiring a shut-off valve orgauge snubber. Made of 318 Stainless Steel and

utilizing .38 inch cone fittings, it is theperfect selection for use with your Ultra-High Pressure hand pump.

Test System Gauges

Ideal for monitoring pressurein your hydraulic circuit, TestSystem Gauges, such as theT6010L, are available with

cone threads or NPT threads and avariety of pressure ranges.

P-2282

T-6010L

45-116

83-011 43-701

Ultra-High Pressureup to 2800 bar

G Typical Test System

43-701

45-11643-300

72-75043-001

83-011

T-6010L

P-2282

G Test System with Gauge Snubber

* Contact Enerpac for applications where operating pressure is less than 10% of pressure rating.

Page: 116

To system

To system

® 61

.38" cone

.38" cone

.38" cone

.38" cone side/

.25" cone gauge port

.38" cone side/

.25" cone gauge port

.38" cone

.38" cone

.38" cone

100 mm tube, O.D. .38" *200 mm tube, O.D. .38" *300 mm tube, O.D. .38" *

.38F cone to 1/4" M NPTF

.38F cone to 3/8" M NPTF

.38F cone to 1/4" F NPTF

.38F cone to 3/8" F NPTF

Model Nr.


PistonStroke

(mm)

ModelNumber

P-228211-10011-400

A B C D E F H J L M N S T

Weight

(kg)

25,419,819,8

344240240

Gland Nut Plug

Elbow

Tee

GaugeTee

GaugeAdaptor

Coupling

Cross

Gland Nut with Sleeve

Tubing

H Optional Ultra-High Pressure Fittings and Tubings

ConnectionDescription

558266266

35151151

–177177

314545

133––

527635635

29162162

228114114

7237237

120314314

–77

–99

6,410,010,0

3/4"-16UNF J M

L

H

40˚

F A CB

EN

3/4"-16UNF

CD

E

J

M

N

1/4"-20UNC

T

35˚

A

S

B

L

H

P/11Series

Reservoir Capacity:

737-983 cm3



700-2800 bar

700 bar onlyAdaptor

Adaptor

Dimensions (mm)

P-2282

11-100, 11-400

Note: .25" cone fittings use 9/16"-18 threads, 3/8" cone threads use 3/4"-16 threads.

* Actual tubing lengths are 19 mm less than nominal size shown. These dimensions make distance between centers of valves andfittings multiples of 100 mm spaces.

43-001

43-200

43-300

43-301

83-011

43-400

43-600

43-701

45-11645-12645-136

41-146

41-166

41-246

41-266

2800 bar

Optional gauge

Release Valve

62

®

Hydraulic Technology WorldwideWalkPacTM - Battery Powered Pumps

• Light weight, integral battery for improved ergonomics andmaximum portability

• Micro piston pump technology and direct drive for high efficiency and longer life

• Quiet and smooth operation plus ergonomic styling allowuser to “wear” the pump

• Powerful 24 volt interchangable battery pack for high performance and long life

• “Intelligent” battery charger provides fast one-hour chargeand complete battery conditioning for trouble free operation

• CR-400 coupler and dust cap included

Pick Up the Power

H Shown from left to right: PBR-12001E, PBM-11001E, PBR-13001E

H No need for long power cables or air hoses. You can take yourWalkPac™ anywhere you need.

H The included shoulder strap allows easy use of the WalkPac™even in difficult locations.

Additional Battery Packs

WalkPac™ battery packsand chargers are alsoavailable separately.

Foot Switch

Operate your WalkPac™keeping both hands free toposition the tool.Includes 3 m cable.

For use with all PBR-version WalkPacs.

Pendant Extension Cables

These cables allow the pump to beoperated at a greater distance forincreased safety and flexibility.For use with all PBR-version WalkPacs.

Battery Charger 115 VAC BC-1724BBattery Charger 230 VAC BC-1724EBattery Pack BP-1724

1,8 m Cable RPC-025,5 m Cable RPC-0613,7 m Cable RPC-15

Foot Switch (11000, 12000-Series) WFS-1Foot Switch (13000-Series) WFS-2

® 63

WalkPacTM - Battery Powered Pumps

622622622622622622

700700700700700700

Manual

Remote(with

pendant)

Usable Oil

Capacity(cm3)

PumpType

PressureRating

(bar)

Valve Function

0,1640,1640,1640,1640,1640,164

OutputFlow Rate

(l/min)

Weightincludingbattery

(kg)

ValveType

Dump Manual ReleaseDump and Hold

Dump Manual ReleaseDump and Hold

Model Number

PBM-11001EPBM-12001E*PBM-13001EPBR-11001EPBR-12001EPBR-13001E

686868686868

8,68,48,68,68,48,6

SoundLevel

(dBA)

ElectricManualElectricElectricManualElectric

PBSeries

Reservoir Capacity:

622 cm3

E


0,164 l/minOperating Pressure:

700 bar

WalkPac™ Performance

The most commonly askedquestion concerning battery

powered equipment is: “How long will it last on a charge?”

Although ambient temperature, toolcondition, operating pressure andfrequency of use will affect actual battery life, as a rule of thumb youshould expect this type ofperformance:

Number ofTool Type Operations

Nut Cutter, 20 ton, 38 mm nuts 40Electrical Lug Crimping, 1,5 ton 70Hydraulic Knock-Out, 12 ton, 152 mm 25Rebar Cutter, 20 ton, 12 mm bar 28

For applications requiring morebattery life, a second pack can becharging, ready for use whenneeded.

Speed Chart



Page: 103

Fault indicator light

“Pressure”

“Release”Reservoir fill cap (auto-vent)

Pendant receptacle (PBR-models only)

Note: To order your WalkPac™ without the battery charger, please delete the “E” suffix in the model number.* Available as a set, see note on this page.

PBR-13001E

WalkPac and Cylinder Sets

WalkPac Pumpsmarked with an * are

available as sets (pump,cylinder, gauge, couplers and

hose) for your ordering convenience.

Page: 50

WalkPac

FLOW CHART

Oil

Flo

w(l/

min

)E

Pressure (bar) E

WalkPac™ series

64

®


Gauges

Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. For use with

the Economy pump the following gaugesare suggested:

For a full range of gauges, please refer tothe System Components section.

Economy Electric Pumps

• Light weight and compact design: 11,8 to 18,6 kg• Large easy-carry handle for maximum portability• Two-speed operation reduces cycle times for improved

productivity • 230 VAC 50/60-cycle universal motor will operate on

voltages as low as 115 volts • 24 VDC remote motor control, 3 m length for operator

safety• Starts under full load• High strength molded shroud, with integral handle,

protects motor from contamination and damage

H Shown: PUJ-1200E

1,93,81,93,81,93,8

131313131313

700700700700700700

Single-Acting

Double-Acting

Usable OilCapacity

(litres)

PumpType

(Used with cylinder)

Pressure Rating

(bar)

ModelNumber*

PUD-1100EPUD-1101EPUJ-1200EPUJ-1201EPUJ-1400EPUJ-1401E

H An Economy pump PUJ-1200E is used with an RC-2514 to reposition a stamping die to simplify maintenance.

1st stage 2nd stage

Page: 105

* For 115 volt applications replace ’E’ suffix with ’B’.

** Electric dump valve for auto-retract of cylinders.

PUD-1100E, 1101EPUJ-1200E, 1201EPUJ-1400E, 1401E

G-2535LG-2535LG-2535L

GA-3–

GA-3

Hoses



For Pump Model Number

GaugeModelNumber

GaugeAdaptorModel Nr.

Speed Chart



Page: 103

Heavy onPerformance, Light on Weight

Page: 106

® 65

PUD-1100EPUD-1101EPUJ-1200EPUJ-1201EPUJ-1400EPUJ-1401E

Economy Electric Pumps

ValveType

OutputFlow Rate

(I/min)

Weight

(kg)

CurrentDraw

(Amps)

ModelNumber*

362373362373362373

101010101010

133142133142133142

244368244368244368

244309244309244309

101105101105101105

119130119130119130

203323203323203323

HFEDCBA J

Dump**

3-way,2-pos.

4-way,3-pos.

11,817,210,015,413,218,6

858585858585

SoundLevel

(dBA)

230230230230230230

MotorVoltage

(VAC)

3,23,23,23,23,23,2

1st stage 2nd stage

PUSeries

Reservoir Capacity:

1,9-3,8 litres

E


0,32 l/minMotor Size:

0,37 kWMaximum Operating Pressure:

700 bar

D

C

FA

1/4"-18NPT

E

J

3/8"-18NPT

3/8"-18NPT

B

H

Gauge Port (PUJ-1200/1201 only)

Outlet Port

Tankport

Dimensions (mm)

3,313,313,313,313,313,31

0,320,320,320,320,320,32

About the Economy Pump

The Economy pump is bestsuited to power small to

medium size cylinders or hydraulictools. Its light weight and compactdesign make it ideal for applicationswhich require easy transport of thepump. The Universal motor works well onlong extension cords or generator-driven electrical power supplies.

For further application assistancerefer to the ‘Yellow Pages’.

PUD Series• Provides advance-retract control

of single-acting cylinders• Ideal for punching applications• For applications not requiring load

holding• 3 m pendant controls motor and

valve operation

PUJ Series• Available with 3- and 4-way

valves for single or double-actingcylinders

• 3 m pendant controls the motoroperation

• Manual valves provide advance-hold-retract tool operation

FLOW CHARTO

il Fl

ow

(l/m

in)

E

Pressure (bar) E

Page: 93

Economy Series

66

®


• Patented Genesis technology: - coaxial piston design allows high performance in the

most compact and light weight package, starting at 28,1 kg- first-stage piston pump enables higher by-pass pressure

for improved productivity• Powerful 0,84 kW universal motor for a high power to

weight ratio, and the ability to run on as little as 50% ofrated line voltage

• Ergonomic motor shroud is lined with sound reductionmaterial while providing protection for the motor

• Four reservoir sizes to operate a wide range of cylindersand tools

• 24-VDC remote pendant controls for safer operation• Externally adjustable relief valve allows control of

operating pressure without opening the pump• Analog reservoir sight gauge for ease in monitoring oil

level also includes filtered breather

Titan Electric Pumps

Featuring GenesisTechnology

H Shown from left to right: PUD-3309E, PUM-3209E, PUR-3420E

5 BASIC PUMP TYPES

Select the model that suits yourapplication. For special requirements seepage 69 or contact your Enerpac office.

PUF Series: with Solenoid Valve• Identical to PUR-series, except pendant

is replaced with foot switch for hands-free operation

PUJ Series: with Manual Valve• For light production and lifting

applications• Manual valve control for single-acting or

double-acting cylinders• Control pendant with 3 m cord for

remote motor operation

PUM Series: with Manual Valve• Ideal choice for most applications• Manual valve control, for single-acting

or double-acting applications• Manual motor control

PUR Series: with Solenoid Valve• Ideal for lifting applications or wherever

remote control is required• All valves are 3 position for Advance-

Hold-Retract• Control pendant with 3 m cord for

remote valve operation F A Titan PUJ-3309E

is used with ahydraulic cutter tocut wire rope.

H SELECTION CHARTFor more technical information see next page.

PUD Series: with Dump Valve• Ideal for punching, crimping and cutting• For use when load-holding is not

required (3100 Series)• Control pendant with 3 m cord

controls valve and motor• Provides Advance-Hold-Retract for

single-acting cylinders (3300 Series)

* See Valves section for technical information onvalve types.

® 67


Weight

(kg)

Single-ActingSingle-ActingSingle-ActingSingle-Acting

Single-ActingSingle-ActingSingle-ActingSingle-ActingSingle-ActingSingle-ActingDouble-ActingDouble-ActingDouble-ActingDouble-ActingDouble-ActingDouble-Acting

Double-ActingDouble-Acting

Single-ActingSingle-ActingDouble-ActingDouble-Acting

Advance/RetractAdvance/Retract

Advance/Hold/RetractAdvance/Hold/Retract

Advance/RetractAdvance/RetractAdvance/Retract

Advance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/Retract


Advance/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/Retract

599

20

920409

20409

20409

2040

920

999

20

28,632,232,249,4

28,145,866,728,145,466,728,145,466,738,155,376,7

38,155,3

30,830,830,848,1

Genesis Series

Genesis Series

Genesis Series

Genesis Series

Model Number230 VAC 1 Phase

Used with Cylinder

Valve Type* Pump ControlValve Function Usable OilCapacity

(litres)

PUSeries

Reservoir Capacity:

5, 9, 20 and 40 litres

E



0,84 kW

PUD-3105EPUD-3109EPUD-3309EPUD-3320E

PUM-3209EPUM-3220EPUM-3240EPUM-3309EPUM-3320EPUM-3340EPUM-3409EPUM-3420EPUM-3440EPUR-3409EPUR-3420EPUR-3440E

PUF-3409EPUF-3420E

PUJ-3209EPUJ-3309EPUJ-3409EPUJ-3420E

Genesis Series

DumpDump

Dump and HoldDump and Hold

VM-2VM-2VM-2VM-3VM-3VM-3VM-4VM-4VM-4BVS-4BVS-4BVS-4

BVS-4BVS-4

VM-2VM-3VM-4VM-4

RemoteRemoteRemoteRemote

ManualManualManualManualManualManualManualManualManualRemote Remote Remote

Remote (Foot)Remote (Foot)

Remote (Man.)Remote (Man.)Remote (Man.)Remote (Man.)

Pump Type

Titan Pump Application

The Titan pump is bestsuited to power medium to

large size cylinders or hydraulictools, or wherever high speed,intermittent hydraulic power isneeded. Patented Genesis Technologyprovides high by-pass pressures for increased productivity,specifically in applications usinglong hose runs and high pressuredrop circuits like heavy lifting orcertain double-acting tools.

Its light weight and compact designmake it ideal for applications whichrequire easy transport of the pump.It utilizes a Universal motor whichwill work well on long extensioncords or generator driven electricalpower supplies.

For further application assistancesee the ‘Yellow Pages’ or contactyour local Enerpac office.

Page: 93

Maximum Operating Pressure:

700 bar

68

®


83-88

Reservoir Dimensions

25 @ 115-1-50/6012,5 @ 230-1-50/60700 10,5


0,84

MotorSize

(kW)

Pressure Rating

(bar)

Motor ElectricalSpecifications*

(Amps @ Volts-Ph-Hz)

Output Flow Rate

(l/min)

Relief ValveAdjustment

Range

(bar)

SoundLevel

(dBA)

140-700

* At full load


110 0,98

20 and 40 litres reservoir

5 and 9 litres reservoir

Reservoir HeightA

(mm)

Usable OilCapacity

(litres)

59

2040

119169185315

Optional Roll Bar(20 litres only)

TITAN PERFORMANCE CHART

F A special bolting version of theTitan is used with an EnerpacTorque Wrench in the installationof a draw bar.

A Titan PUM-3309E is used withan NC-3241 Nut Splitter to

remove nuts in the repair of a loading bucket. E


FLOW CHART

Oil

Flo

w (l

/min

)E

Pressure (bar) E

Titan Series

Speed Chart



Page: 103

® 69

Post-Tensioning Model

Developed exclusively forthis tough application, theTitan Post-TensioningPump includes an integral

roll-cage and cooler to extend pumplife and service intervals for thismarket. To order your 230 VAC Titan Post-Tensioning pump,

use the following model numbers:

For other voltages and CSAinformation, please contact yourEnerpac office.


PUSeries

Reservoir Capacity:


E




700 bar

Gauges

Minimize the risk of over-loading and ensure long,dependable service fromyour equipment.

For all Titan pumps, we suggest the GP-10S, with gauge adaptor GA-2.For a full range of gauges, please refer to the System Components section.

Page: 105

P U M - 3 2 09 E R .1

ProductType

2MotorType

3PumpType

4PumpSeries

5ValveType

6Reservoir

Size

7Motor

Voltage

8Options

1 Product TypeP = Pump

2 Motor TypeU = Universal Motor

3 Pump TypeD = Dump*F = Foot SwitchJ = JogM = ManualR = Remote (Solenoid)N = No Valve

4 Pump Series3 = 0,84 kW, 700 bar

5 Valve Type0 = No Valve1 = Dump2 = 3-way, 2-position3 = 3-way, 3-position4 = 4-way, 3-position6 = 3-way, 3-position, with Locking Valve8 = 4-way, 3-position, with Locking Valve

6 Reservoir Capacity05 = 5 litres** 09 = 9 litres 20 = 20 litres 40 = 40 litres

7 Motor Voltage B = 115 V, 1 Ph, 50/60 HzE = 230 V, 1 Ph, 50/60 Hz

8 Options: (leave blank if not required)R = Roll Bar (20 litres only)E = EPR SealsV = Viton Seals

CUSTOM BUILD YOUR TITAN PUMPIf the Titan that would best fit your application cannot be found in the charton the previous page, here you can easily build your custom Titan pump.

H This is how a Titan Pump Model Number is built up:

Model Number: PUR-3420E

PUR-3420E is a 0,84 kW, 700 bar,electric pump, with a 4-way, 3-position valve, remote control, a 20 litres reservoir and a 230 V, 1 Phase, 50/60 Hz motor.

Ordering Example 1

Model Number: PUM-3305E

PUM-3305E is a 0,84 kW, 700 bar,electric pump, with a 3-way, 3-position valve, a 5 litres reservoirand a 230 V, 1 Phase, 50/60 Hz motor.

Ordering Example 2

* Available with dump valve and 3-way, 3-position valve type

** Consult Enerpac for duty cycle

Hoses


specify only genuine Enerpac hydraulic hoses. Page: 106

Valve Model Number

VM-2 PUM-3205FPTVM-4 PUM-3405FPTVM-4 (Power Seat) PUM-3805FPT

70

®

Hydraulic Technology WorldwideSubmerged Electric Pumps

• Two-speed operation reduces cycle times for improvedproductivity

• Powerful 0,37 kW induction motor is submerged in the oilreservoir to run cooler, protect the motor, simplify thepump interface, save space and reduce noise

• Large 5,5 litres reservoir allows operation of a wide rangeof cylinders

• 24 VDC remote pendant control on certain models for safer operation

• Externally adjustable relief valve allows control ofoperating pressure without opening the pump

• 40-micron internal return line filter keeps oil clean, promoting longer pump life

• Full length side tube for easy monitoring of oil level

H Shown: PEJ-1401E

PED Series: with Dump Valve

• Ideal for punching, crimping and cutting•For use when load holding is not

required•Control pendant with 3 m cord controls

valve and motor

5 BASIC PUMP TYPES

Select the model that suits yourapplication. For special requirements seepage 73 or contact your Enerpac office.

PEM Series: with Manual Valve

• Ideal choice for most applications•Manual valve control, for both single-

acting and double-acting applications•Manual motor control

PER Series: with Solenoid Valve

• Ideal for production and lifting•All valves are 3 position for

Advance-Hold-Retract•Control pendant with 3 m cord

for remote valve operation

PEJ Series: with Remote Jog• For light production and lifting

applications• Manual valve control for single-acting or

double-acting cylinders• Control pendant with 3 m cord

for remote motor operation

PES Series: with Pressure Switch

•Designed for continuous pressureapplications, such as clamping,workholding and testing

•All versions include manual valves fordirectional control

F The Remote Jog Model of theSubmerged Pump simplifiesrepair on this constructioncrane.

Best Performanceon Mid-RangeCylinders and Tools

H SELECTION CHARTFor more technical information see nextpage.

* See the Valve Section of this catalog fortechnical information on valve types.

® 71

Submerged Electric Pumps

Model Number230 VAC, 1 ph

Used with Cylinder

Pump Type Valve Type*Valve Function Usable OilCapacity

(litres)

Weight

(kg)

PED-1001E

PEM-1201EPEM-1301EPEM-1401E

PER-1301EPER-1401E

PEJ-1201EPEJ-1301EPEJ-1401E

PES-1201EPES-1401E

Single-Acting

Single-ActingSingle-ActingDouble-Acting

Single-ActingDouble-Acting

Single-ActingSingle-ActingDouble-Acting


Dump

Manual, 3-way, 2-positionManual, 3-way, 3-position Manual, 4-way, 3-position

Solenoid, 3-way, 3-positionSolenoid, 4-way, 3-position

Manual, 3-way, 2-positionManual, 3-way, 3-position Manual, 4-way, 3-position

Manual, 3-way, 2-position Manual, 4-way, 3-position

Advance/Retract

Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract


Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract

Advance/RetractAdvance/Hold/Retract

5,5

5,55,55,5

5,55,5

5,55,55,5

5,55,5

24,9

24,024,024,0

29,529,5

24,924,924,9

28,128,1

PESeries

Reservoir Capacity:

5,5 litres

E



0,37 kW

Submerged PumpApplication

The Submerged pump isbest suited to power small tomedium size cylinders or hydraulictools, or whenever quiet,intermittent hydraulic power isneeded. With its low sound level and theaddition of the optional oil cooler,the Submerged pump is suited to

light production work as well.

Its light weight and compact designalso make it ideal for applicationswhich require some transport of thepump.


Page: 93


700 bar

72

®

Hydraulic Technology WorldwideSubmerged Electric Pumps

13 @ 115-1-50/606,75 @ 230-1-50/60700 2,00,37

MotorSize

(kW)

PressureRating

(bar)

Motor ElectricalSpecifications*

(Amps @ Volts-Ph-Hz)

OutputFlow Rate

(l/min)


Range

(bar)

62-70

SoundLevel

(dBA)

70-700

*At full load.


70 0,27

Speed Chart



Page: 103

SUBMERGED PUMP PERFORMANCE

F This PED-1001E Submergedpump quickly and quietly powers a hydraulic nut cutter in thisbucket maintenance application.


a Heat Exchanger (optional for all models)

b Fill Port

c Pressure Switch (PES-series, optional for other models)

d Oil Level Indicator

FLOW CHART

Oil

Flo

w (l

/min

)E

Pressure (bar) E

Submerged Series

® 73

Submerged Electric Pumps

PESeries

Reservoir Capacity:

5,5 litres

E




700 bar

P E M - 1 3 01 E1

ProductType

2MotorType

3PumpType

4PumpSeries

5ValveType

6Reservoir

Size

7Motor

Voltage

1 Product TypeP = Pump

2 Motor TypeE = Electric Motor

3 Pump TypeD = DumpJ = JogM = ManualR = Remote (Solenoid)S = Pressure Switch

4 Pump Series1 = 0,37 kW, 700 bar

5 Valve Type0 = Dump2 = 3-way, 2-position, normally open3 = 3-way, 3-position, tandem center 4 = 4-way, 3-position, tandem center

6 Reservoir Capacity01 = 5,5 litres

7 Motor Voltage and Heat ExchangerB = 115 V, 1 Ph, 50/60 HzD = 115 V, 1 Ph, 50/60 Hz

with Heat ExchangerE = 230 V, 1 Ph, 50/60 HzF = 230 V, 1 Ph, 50/60 Hz

with Heat Exchanger

CUSTOM BUILD YOUR SUBMERGED PUMPIf the Submerged Pump that would best fit your application cannot be foundin the chart on page 71, here you can easily build your custom submergedpump.

H This is how a Submerged Pump Model Number is built up:

Model Number: PER-1301E

The PER-1301E is a 0,37 kW,700 bar, submerged electricpump, with 5,5 litres usable oilcapacity, a 3-way, 3-position,solenoid remote valve and a230 V, 1 Phase, 50/60 Hzmotor.

Ordering Example Hoses



Gauges



Page: 105

74

®


ReservoirCapacity

(litres)

VM-3VM-3LVM-4VM-4LVM-4

BVS-3BVS-4BVS-4BVS-4BVS-4

VM-2VM-3VM-4VM-4

582040

5820

820202040

5582040

8202040

Valve**Model

Number

Valve Function

Hushh Electric Pumps

The Standard forIndustrialApplications

H Shown from left to right: PEM-3420W, PER-3405WS

PEN-Series without Valve

• Ideal for matching your valving to your needs, for example in production applications.

PED-Series with Dump Valve

• Ideal for punching, crimping and cutting• For use when load holding is not required• Control pendant with 3m cord controls valve

and motor

PEM-Series with Manual Valve

• Ideal choice for most applications• Manual valve control, for both single-acting or

double-acting applications• Manual motor control

PER-Series with Solenoid Valve

• Ideal for production and lifting applications• All valves are 3-position for Advance-Hold-Retract• Control pendant with 3m cord for remote valve

operation

PES-Series with Pressure Switch and Manual Valve

• For continuous-pressure applications such as clamping• Includes a manual valve and a pressure gauge• Adjustable pressure switch turns pump off when

desired pressure is reached.

5 BASIC PUMP CONFIGURATIONS

Select your hushh pump model here for mostapplications. For special requirements see the hushh pump ordering matrix.

Pump Type

* All models in this chart are 400 VAC, 3 phase at 50 Hz. For other options please refer to the Hushh Pump ordering matrix on page 79.

Used withCylinder

•••

••

•

••

•••

••••

••

•••

••••••••••••••

••••••••••

•••

•••

••••••••••••••

Page: 79

All models in the chartbelow are the industriesmost commonly selected

pump configurations. See the Hushh Pump ordering matrix for more options.

Page: 79

®


® 75

PEN-2005WSPEN-2008WSPEN-2020WS

–

PED-2105WSPED-2108WSPED-2120WS

PEM-2308WS–

PEM-2420WSPEM-2820WS

–

PER-2305WSPER-2405WS

–––

PES-2208WS–––

272944

293146

32

4749

3740

35

––––

–PED-2108WPED-2120W

––

PEM-2420WPEM-2820WPEM-2440W

–PER-2405WPER-2408WPER-2420WPER-2440W

–PES-2320WPES-2420W

–

3247

485066

41445977

4851

–PEN-3008WS

––

–PED-3108WS

–

PEM-3308WSPEM-3620WS

–––


–––

PES-3208WSPES-3320WS

––

33

35

3752

4143

3749

––

PEN-3020W–

––

PED-3120W

–PEM-3620WPEM-3420WPEM-3820W

–

–––––

––

PES-3420W–

49

51

535153

52

––

PEN-5020WS–

––

PED-5120WS

–––

PEM-5820WS–


–––

––

PES-5420WS–

49

51

53

4446

57

–––

PEN-5040W

––

PED-5120W

–––

PEM-5820W–

–––––

–––

PES-5440W

78

52

54

84


• Available as two-stage model for reduced cycle times andimproved productivity

• Totally enclosed fan-cooled motors are ideal for outdooruse in many environments

• 24-VAC solenoid valves and remote pendant controls forsafer operation

• Adjustable pressure relief valve• 71-73 dBA for quiet in-plant applications with electric

motor

PESeries

Reservoir Capacity:


E


0,55 - 1,52 l/minMotor Size:

0,75 - 1,1 and 2,2 kWMaximum Operating Pressure:

700 bar

**See Valve Section for technical information.

Two StageSingle Stage Two StageSingle Stage Two StageSingle Stage

2000-SeriesOutput Flow Rate at 700 bar: 0,55 l/min



Model Number

Weight

(kg)

Model Number

Weight

(kg)

Model Number

Weight

(kg)

Model Number

Weight

(kg)

Model Number

Weight

(kg)

Model Number

Weight

(kg)

Single Stage or Two Stage

Choose Single Stageoperated pumps, for

applications that require constantflow regardless of pressure, such astesting or clamping.

Two Stage operated pumps have an increased output flow (appr.10xhigher) at pressures below 65 bar.This allows fast plunger movementtowards the load, for reduced cycletimes and increased productivity.

76

®


A B C D E F H 1) J 2) K 3)

ReservoirCapacity

(litres)


2000

3000

5000

Single-stageTwo-stageSingle-stageTwo-stageSingle-stageTwo-stage

HushhPumpSeries

Operation Pressure Rating

(bar)

Type of Pump Motor Size

0,750,751,101,102,202,20

139013901390139013901390

Output Flow Rate

(l/min)


Range(bar)

SoundLevel

(dBA)

All models shown are 400 VAC, 3 phase, 50 Hz. See the Hushh Pump ordering matrix (page 79) for more options.Note: Single-stage, 5000 Series models are not available with 115 VAC, 1 phase or 230 VAC, 1 phase.

–gerotor

–gerotor

–gerotor

700700700700700700

2x Rad.pist.2x Rad.pist.3x Rad.pist.3x Rad.pist.3x Rad.pist.3x Rad.pist.

–65–

65–

65

0,550,550,820,821,521,52

–5,1–

8,5–

8,5

1st stage 2nd stage 1st stage 2nd stage 1st stage 2nd stage RPM kW

58

2040

304304460460

205205340340

335335

––

159191191320

––

5050

165165295295

409440440615

73737373

405405

––

Usable Oil

Capacity(litres)

Pump Dimensions (mm)

CA

KJE E

16 x ø75010

3/8"-18NPT

F

D

H

B

4 x ø7 2525

0 100 200 300 400 500 600 700

1,0

0,0

2,0

3,0

4,0

5,0

6,0

7,0

9,0

8,0

10,0

0 100 200 300 400 500 600 700

1,0

0,0

2,0

3,0

4,0

5,0

6,0

7,0

9,0

8,0

10,0

0 100 200 300 400 500 600 700

1,0

0,0

2,0

3,0

4,0

5,0

6,0

7,0

9,0

8,0

10,0

Oil

Flo

w (l

/min

)E

Oil

Flo

w (l

/min

)E

Oil

Flo

w (l

/min

)E

Speed Chart



Page: 103

H PERFORMANCE CHART

H FLOW CHARTS

70-700

70-700

70-700

71

73

73

5,07,5

20,040,0

2000WS (single stage)2000W (two stage)

2000-Series 3000-Series 5000-Series



1) Add 25mm for all 5000 singlestage versions or all pumpswith 230VAC, 1phase motors.

2) Only for pumps with manualvalves (PEM- and PES-models).

3) Only for 5 and 8 litres pumpswith electric valves.

®


® 77


H Reliability is the key issue when workingon projects like this.

H This Hushh pump equipped with pressure gauge and flow control valves,is used for concrete form removal.

Hoses



Gauges



Page: 112

PESeries

Reservoir Capacity:


E



0,75, 1,1 and 2,2 kWMaximum Operating Pressure:

700 bar

Application Tip

The Hushh-Series is themost versatile of the Enerpac

pump line. It is best suited to powermost medium to large size cylindersor multiple cylinder circuits. Due toits wide selection of reservoir, valveand control options, the Hushh-Series is well suited to productionwork as well as many liftingapplications. With the smaller

reservoirs it is light enough for someportable applications, as long as theavailable power supply is stable. TheHushh-Series induction motor needsa steady supply of A.C. power.


H This PEM-3240W Hushh electric pumpfeatures a 40 litres reservoir for this multi-cylinder system.

For additional models (such as one-stage) andoptions, see the matrix andaccessories pages.

Page: 79

78

®


To order, refer tothe Hushh-Pumpmatrix on page 79for correct voltage.

Available as anaccessory only.

To order installedon your pump, referto the Hushh-Pumpmatrix on page 79for correct voltage.

To order refer tothe Hushh-Pumpmatrix on page 79.

Hushh Pump Accessories & Options

HeatExchanger

CarryingHandle

Oil Reservoir

Roll Bar

Oil Filter Kit

Caster Kit

MotorVoltage

• For use in production applications or anytime the pump will run for more than 1 hour at a time

• Available as an option or an accessory

• Robustly constructed• Easy to read oil level indicator• Filled with premium hydraulic oil• Usable oil capacities of 5, 71/2, 20 or 40 litres

• Attached to the reservoir mounting rails• For easy portability and facilitating crane

hoisting of 5 and 8 litres reservoirs• Dimensions ( L x W x H ) 570 x 185 x 415 mm

• Attached to the reservoir mounting rails, it protects your Hushh-Pump in severeapplications

• Incorporates a top cover plate• Dimensions ( L x W x H )

PPK-20 770 x 315 x 565 mmPPK-40 770 x 315 x 595 mm

• Extends service life of oil and pump• 25 micron filter rating• Filters return-line oil

• A set of 4 casters• For applications requiring mobility• Attached to the reservoir mounting rails,

it allows the pump to be easily rolled on theshop floor

• 5 Different types of motor voltages for AC supply

• 1- or 3-phase • 50 Hz frequency• With or without Heat Exchanger


Available as anaccessory only.Cannot be usedwith Roll Bars.

ModelNumber

FeaturesDescription OrderingInformation

Availablefor allmodels

PC-95

PFC-25

PPK-20 (20 ltr)PPK-40 (40 ltr)

PAC-230

PPH-58

Availablefor allmodels


®


® 79

Hushh Pump Ordering Matrix

P E M - 3 3 05 W S .1

ProductType

2MotorType

3Valve

Operation

4PumpSeries

5ValveType

6ReservoirCapacity

7Motor

Voltage

8Options

CUSTOM BUILD YOUR HUSHH PUMPIf the Hushh Pump that would best fit your application cannot be found in thechart on page 75, here you can easily build your custom Hushh pump.

H This is how a Hushh Pump Model Number is built up:

Model Number: PEM-3305WS

PEM-3305WS is a 1,1 kW, 700 bar pump, single stage,oil flow 0,55 l/min, with a 3-way, 3-position manual valve(VM-3), a 5 litres reservoir, and 400V, 3 phase, 50 Hz motor.

Ordering Example 1

Model Number: PER-2405W

PER-2405W is a 0,75 kW twostage pump, with a 0,82 l/minoil flow at 700 bar, a 4-way, 3-position solenoid valve(BVS-4), a 5 litres reservoir anda 400V, 3 phase, 50 Hz motor.

Ordering Example 2

1 Product Type

P = Pump

2 Motor Type

E = Electric Motor

3 Valve Operation

D = DumpM = ManualR = Remote (Solenoid)S = Pressure SwitchN = No Valve**

4 Pump Series

2 = 0,55 l/min (0,75 kW)3 = 0,82 l/min (1,10 kW)5 = 1,52 l/min (2,20 kW)

5 Valve Type0 = No valve**1 = Dump Valve2 = 3-way, 2-position,

manual valve3 = 3-way, 3-position,

manual or solenoid valve4 = 4-way, 3-position,

manual or solenoid valve6 = 3-way, 3-position,

manual locking valve with pilot operated check

8 = 4-way, 3-position, manual locking valve with pilot operated check

6 Reservoir Capacity05 = 5 litres08 = 8 litres20 = 20 litres40 = 40 litres

7 Motor VoltageA = 115 V, 1 ph, 50 Hz*C = 115 V, 1 ph, 50 Hz,

with Heat Exchanger*E = 230 V, 1 ph, 50 Hz*F = 230 V, 1 ph, 50 Hz,

with Heat Exchanger*K = 440 V, 3 ph, 50 HzL = 440 V, 3 ph, 50 Hz,

with Heat ExchangerT = 230 V, 3 ph, 50 HzU = 230 V, 3 ph, 50 Hz,

with Heat ExchangerW = 400 V, 3 ph, 50 HzX = 400 V, 3 ph, 50 Hz,

with Heat Exchanger

8 Options

blanc = Two stageE = EPR SealsS = Single stageV = Viton Seals

* Not available for 5000-Series singlestage models.

** For remote valve or valve block, usea BSS-1090 high pressureconnecting plate

Viton and EPR Seals

Enerpac pumps andcomponents are shipped with

Polyurethane and Buna N seals for mostsealing requirements. These sealcompounds offer the best performanceand durability for most applications.

For applications that require specializedseals, Enerpac does make availableViton and EPR seals as options forcertain pumps. The use of these sealsmay reduce life between seal changes,but may be the only solution to theapplication.

Viton:Sometimes required for sealcomputability issues, such as with most glycols, but most commonlyrecommended for hightemperature applications.

EPR: Generally required for use withfire-resistant fluids such asphosphate esters. When used,they must not be exposed tomineral-base fluids!

Valve Selection

For help in selecting the rightvalve for your application, refer

to the Valve Information page of our‘Yellow Pages’.

Page: 104

PESeries

Reservoir Capacity:


E



0,75 - 1,1 and 2,2 kWMaximum Operating Pressure:

700 bar

80

®

Hydraulic Technology Worldwide8000 and 9000 Series, Electric Pumps

• Single-speed operation with two and four independentsplit-flow outlets

• Two-speed operation with high-flow outlet• Oil delivery of each outlet remains equal regardless of

pressure• 60 litres usable oil capacity allows operation of a wide

range of cylinders• Powerful 4 and 9,5 kW motor, available in three voltage

options

The Axial PistonPump with fourindependant outlets

H Shown: PPE-9483-4

Hoses



Page: 106

H To lift a rigid construction, four double-acting RR-2006 cylinders are powered by a 4-splitelectric pump.

60606060

190300

––

4,09,59,59,5

two-speed

single-speed

UsableOil

Capacity

(litres)

MotorSize

(kW)

Pump Type PressureRating

(bar)

1 x 4,21 x 8,02 x 5,04 x 2,5

OutputFlow Rate

(l/min)

Pump Series*

PPN-8000PPN-9000PPN-9000-2PPN-9000-4

700700700700

14,514,5

––


Gauges



Page: 105

* The “N” in the model number stands for No Valve. All pump models can be ordered withManual or Solenoid Valves. See selection chart on next page.

Locking Valves

Pumps with VM-3 or VM-4manual valves may beordered with locking valves.

This locking feature provides a hydrauliclock for the cylinder using pilot-operatedcheck valves. To order this option, just place an “L”suffix at the end of the model number.For more information, contact your local Enerpac office.

Page: 120

® 81

* = Single-Acting = Double-Acting

8000 and 9000 Series, Electric Pumps

PPSeries

Reservoir Capacity:

80 litres

E


4 x 2,5 to 8,0 l/minMotor Size:

4,0 - 9,5 kWMaximum Operating Pressure:

700 bar

274275275286

8000-SeriesHigh-flow outlet

9000-SeriesHigh-flow outlet

9000-Series2 Split-flow outlets

9000-Series4 Split-flow outlets

ModelNumber

Weight(kg)

–VM-3VM-4BVS-4

Used withCylinder*

–ManualManual

Solenoid

–

•••

N/A

•N/A

••

–

•••

–

•••

ValveControl

Valve Function ValveModel

Number

Speed Chart



Page: 103

1000 200 300 400 500 600 7000

2

4

6

8

10

12

14

16

FLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) E

PPN-8083PPM-8383PPM-8483PPE-8483

303316316330

ModelNumber

Weight(kg)

PPN-9083PPM-9383PPM-9483PPE-9483

304319319340

ModelNumber

Weight(kg)

PPN-9083-2PPM-9383-2PPM-9483-2PPE-9483-2

328333333372

ModelNumber

Weight(kg)

PPN-9083-4PPM-9383-4PPM-9483-4PPE-9483-4

®

®

®

PP E - 9 4 8 3 - 21 2 3 4 5 6 7

Product Valve Pump Valve Reservoir Motor Split-flowType Control Series Type Capacity Voltage Outlets

H This is how 8000- and 9000-Series Pump Model Numbersare built up:

1 Product Type

PP = Power Pump

2 Valve Control

N = No ValveM = ManualE = Solenoid (Electrical)

3 Pump Series

8 = 8000-Series, 4 kW9 = 9000-Series, 9,5 kW

4 Valve Type

0 = No Valve3 = 3-way, 2-position,

manual valve4 = 4-way, 3-position,

manual or solenoid valve

5 Reservoir Capacity8 = 80 Litres

6 Motor Voltage*3 = 400 V, 3 ph, 50 Hz5 = 230 V, 3 ph, 50 Hz6 = 440 V, 3 ph, 50 Hz

* In the selection chart below only400V models (suffix 3) are shown.To order 230V or 440V models,change this suffix to 5 or 6.

7 Split-Flow Outlets9000-Series only2 = 2 equal flow outlets

of 5,0 l/min. at 700 bar4 = 4 equal flow outlets

of 2,5 l/min. at 700 bar

475

610

96540

790

1030

225225225155

PPN-9000PPN-8000

PPN-9000-2PPN-9000-4

82

®

Hydraulic Technology WorldwidePAH-Series, Air Hydraulic PumpsH Shown: PAH-90

The High-Flow ‘Multi-Fluid’ Pump

• Converts 2-7 bar air pressure to 18-900 bar hydraulicpressure

• Can be used with hydraulic oil or other non corrosiveliquids such as water, kerosene, gasolene etc.

• Six models offer many pressure-flow combinations• User supplied valving and reservoir provides system

flexibility• Exhaust-air muffler lowers sound level for reduced

operator fatigue• Heavy duty construction for long life, even in harsh

environments• Ideal for multi-fluid testing applications

��

yyyyyyyyyyyyyyyy

��

yyyyyyyyyyyyyyyyyyyyyyyy �

��

��

��

��

��

��

��

��

yyyyyyyyyyyyyyyy

��

yyyyyyyyyyyyyyyy

��

yyyyyyyyyyyy

RFL-102 Regulator-Filter-Lubricator

Recommended for use withall air pumps. Providesclean, lubricated air and

allows for air pressure adjustment. Steelbowl guards are standard.

150-200µ filter150-200µ filter

max.0,5 m

PP T

T

Air pressureAir pressureReservoir mounted External tank

Hoses



Page: 106

Gauges



Page: 105

® 83

Air Hydraulic Pumps

PAHSeries

Pressure Intensification Ratio:

1:9 - 1:165Flow at Rated Pressure:

0,17-5,00 l/minAir Consumption:

3000 l/minMaximum Operating Pressure:

56-900 bar

All PAH-Series air hydraulic pumps require auser supplied remote valveand reservoir.

For more ordering information, call yourEnerpac distributor. For a full range ofvalves, please refer to the valve sectionof this catalogue.

Page: 119

76

ø204

ø196

36

G1/4"G3/4"

313

44

ø23055

393 222

95

76

15

135

12,5

160208

G3/8"G3/8"

A R

56120220400800900

MaximumPressure

Rating

(bar)

5,02,01,71,3

0,380,17

OutputFlow Rate

(l/min)

2-72-72-72-72-72-7

AirPressure

Range

(bar)

1:91:201:361:671:1271:165

PressureIntensification

Ratio

80-8580-8580-8580-8580-8580-85

SoundLevel

(dBA)

Weight

(kg)

191919191919

ModelNumber

PAH-05PAH-12PAH-22PAH-40PAH-80PAH-90

13,08,56,84,22,11,5

no load load

00

5

200 400 600 800

1

2

3

4

FLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) E

0 2500

3

6

9

12

15

50 100 150 200

FLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) E

PAH-22 PAH-12 PAH-05

PAH-40 PAH-80 PAH-90

Air inletExhaustmuffler

84

®

Hydraulic Technology WorldwideTurbo Air Hydraulic Pumps

• ‘Turbo’ feature utilizes exhaust air to help power the pump, developing 700 bar hydraulic pressure with only5,5 bar air pressure

• Patented “Air Saver” feature for lower air consumption andlower operating costs

• Air exhaust muffler for quieter operation and reducedoperator fatigue

• Return-to-tank port for use in remote valve applications • Air and oil inlet filters for reduced risk of damage from

contamination• Extensive use of engineered plastics for light weight,

corrosion resistance and durability• Internal pressure relief valve for overload protection

The New Standardin Air HydraulicPumps

H Shown from left to right: PAM-1402N, PAT-1102N

H Easily operated by hand or by foot

2081422720814227

Single-Acting

Double-Acting

Usable Oil

Capacity

(cm3)

Used with Cylinder

ModelNumber

PAT-1102NPAT-1105NPAM-1402NPAM-1405N




Large Reservoir Models

The Turbo Air Pump is alsoavailable with an enlargedreservoir: PAT-1105N and PAM-1405N.

Hoses



Page: 106


Turbo pumps are alsoavailable as sets

(Turbo pump, cylinder, gauge, couplersand hose) for your ordering convenience.

Page: 50

TURBO

® 85

Turbo Air Hydraulic Pumps

Weight

(kg)

157201157201

ModelNumber

PAT-1102NPAT-1105NPAM-1402NPAM-1405N

208216272282

229229229229

101101101101

––

3636

128137129139

137146152160

38833883

112120112120

347437315405

6,49,17,3

10,0

306396306396

A B C D E F H J K L M

PATPAMSeries

Reservoir Capacity:

2,5 and 5,0 litresFlow at Rated Pressure:

0,13 l/minAir Consumption:


700 bar

H

C

LJ

1/4"-18NPT

DK

3/8"-18NPT

34

5

AM

F E B

3/8"-18NPT1 2

H

C

LJ

1/4"-18NPT

DK

3/8"-18NPT 3

4

5

RE

LEA

SE

PR

ES

S

AM

E B

1 2 3/8"-18NPT

Dimensions (mm)

Turbo Air Pump (@ 6,9 bar)

a Filtered ‘Permanent’ TankVent

b Return-to-Tank/ Auxiliary Vent / Fill Tank Port

c Hydraulic Output

d Swivel Air Input with Filter

e 4 Mounting Holes for #10 thread formingscrew.Max. depth into reservoir = 19 mm

PAT-1102N and PAT-1105N PAM-1402N and PAM-1405N

700 1,1 0,13 Advance/Hold/Retract

PressureRating

(bar)

Valve Function

Output Flow Rate

(l/min)

Air Pressure

Range

(bar)

79

SoundLevel

(dBA)

340

Air Con-

sumption

(l/min)

2,7-10,3

No load Load

FLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) E

The PAT-models use afoot or hand operatedtreadle to control airand valve functions.

The PAM-models use atreadle with a locking feature,controlling a standard VM-4valve.

86

®

Hydraulic Technology WorldwideAir Hydraulic Pumps

• Rugged construction—built for long life and easy service• Swivel coupling simplifies hydraulic connection and pump

operation• Three-position treadle provides cylinder advance, hold or

retract operation • Operates in all positions for increased versatility in use and

mounting (except PA-1150)• Base mounting slots provided on PA-133

H Shown from top to bottom: PA-1150, PA-133

Reservoir Capacity:

0,6-1,3 litresFlow at Rated Pressure:



700 bar

PC-66 ReservoirConversion Kit

Double the reservoircapacity of your existing PA-133 with this easy toinstall conversion kit.

PASeries

Used with

Cylinder

Usable Oil

Capacity(cm3)

ModelNumber

PressureRating

(bar)

Output Flow Rate

(l/min)

Valve Function Air PressureRange*

(bar)

Air Consump-

tion(l/min)

SoundLevel

(dBA)

Weight

(kg)

58911791311

700700700

0,650,650,65

0,130,130,13

Advance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/Retract

2,7-6,92,7-6,92,7-6,9

255255255

858585

5,47,38,2

PA-133PA-166PA-1150

Single-Acting

No load Load

PA-133, PA-166 (mm) PA-1150 (mm)

Air Input Hydraulic Output

Fill Tank Port Fill Tank Port

Air Input

HydraulicOutput

* Recommended Regulator-Filter-Lubricator: RFL-102

FLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) EAir pressure:

PA Series (@ 6,9 bar)

® 87

10 Series, Air Hydraulic Pumps

• Twin air motor configuration delivers high-flow performancein first stage, up to 4 bar, for rapid cylinder advance

• 4 and 8 litres reservoirs for use with a wide range ofcylinders

• Integral shroud or optional roll bars protect air motors andprovide easy carry

H Shown: PAM-1041

Reservoir Capacity:

4,0-8,0 litresFlow at Rated Pressure:



700 bar

Locking Valves

Pumps with VM-4 manualvalves are available with VM-4L manual lockingvalves instead. Add suffix“L” to pump model number.

Page: 122

VA-2 Remote Valve

For remote operation ofPAM-10 series air pumps.Permits either hand or footoperation.

PAMSeries

Single-Acting

Double-Acting

2,67,62,67,6

10,6510,6510,6510,65

700700700700

0,150,150,150,15

2,7-6,92,7-6,92,7-6,92,7-6,9

510510510510

87878787

22,727,222,727,2

Adv./Hold/Retr.Adv./Hold/Retr.Adv./Hold/Retr.Adv./Hold/Retr.

VM-2VM-2VM-4VM-4

PAM-1021PAM-1022PAM-1041PAM-1042

EAM-1021EAM-1022EAM-1041EAM-1042

Used with

Cylinder

UsableOil

Cap.(litres)

ModelNumberwithShroud

ModelNumberwithRoll Bars

PressureRating

(bar)

Output Flow Rate

(l/min)

Valve Function ValveModel

Air PressureRange*

(bar)

Air Con-sump-

tion(l/min)

SoundLevel

(dBA)

Weight

(kg)1st stage 2nd stage

HydraulicOutput

On/Off Air Valve

4 Li

tres

8 Li

tres

Air Input

* Recommended Regulator-Filter-Lubricator: RFL-102

FLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) E

10 Series (@ 6,9 bar)

PAM-Series (mm)

88

®


* See Valve Section for technical information.

Air Hydraulic Pumps

• Available as two-stage model for reduced cycle times andimproved productivity

• 70-700 bar user adjustable pressure relief valve for pre-setting maximum system pressure

• Oil level indicator allows quick and easy oil levelmonitoring

Power LargeHydraulic Jobs withCompressed Air

H Shown: PAM-2208

PFC-25 Oil Filter Kit

The oil filter kit is easilyinstalled to the Air HydraulicPump, providing 25-micronfiltration for continuous duty applications.

Page: 78

Roll Bars

To protect your Air HydraulicPump when used in harshenvironments, Roll Bars areavailable.




F This Air HydraulicPump has beenmodified tooperate in aunique testingenvironment.

Single Stage or TwoStage

Choose Single Stageoperated pumps, for applicationsthat require constant flowregardless of pressure, such astesting or clamping.

Two Stage operated pumps have an increased output flow(appr.10x higher) at pressuresbelow 65 bar. This allows fastplunger movement towards theload, for reduced cycle timesend increased productivity.

Page: 78

UsableOil

Cap.

(litres)

Valve*ModelNumber

Valve Function

PAN-Series without valve• Ideal for matching your valving to your

system requirements.

PAM-Series with manual valve• Ideal for most applications• Manual valve control for both single

and double-acting cylinders

2 BASIC PUMP CONFIGURATIONS

Select your pump model here. For special requirements see the ordering matrix.

Used withCylinder

•••

•••••

••

••••

–––

VM-2VM-4VM-2

VM-3L

5,07,5

20,05,05,07,5

40,0

24––

26–

29–

–2843–

273065

Page: 89

Single Stage–

1,2 l/min at 700 bar

Model Number

PAN-2005S––

PAM-2205S–

PAM-2208S–

–PAN-2008PAN-2020

–PAM-2405PAM-2208PAM-2640

Weight (kg)

Two Stage10,8 l/min at 65 bar1,2 l/min at 700 bar

Model Number

Weight(kg)

® 89

Air Hydraulic Pumps

PAN/PAMSeries

Reservoir Capacity:

5, 8, 20 and 40 litresFlow at Rated Pressure:


2400 l/minMotor Size:


700 bar

F

D

H

B

3/8"-18NPT

4 x ø7

R 1/2"

2525

CAE E

16 x ø75010

CUSTOM BUILD YOUR AIR HYDRAULIC PUMP

If the Air Hydraulic pump thatwould best fit your applicationcannot be found in the charts, here you can easily build yourcustom pump.

1Product

Type

2MotorType

3Valve

Opera-tion

4PumpSeries

5ValveType

6ReservoirCapacity

7Options

1 Product Type

P = Pump

2 Motor Type

A = Air Motor

3 Valve Operation

M= ManualN = No Valve

4 Pump Series

2 = 1,2 l/min (2,2 kW)

6 Reservoir Capacity

05 = 5 litres08 = 8 litres20 = 20 litres40 = 40 litres

7 Options

blanc = Two stageS = Single stageV = Viton Seals

5 Valve Type

0 = No Valve2 = 3-way, 2-position

(VM-2)3 = 3-way, 3-position

(VM-3) 4 = 4-way, 3-position

(VM-4) 6 = 3-way, 3-position,

Locking (VM-3L)8 = 4-way, 3-position,

Locking (VM-4L)

Example: PAM-2208

The PAM-2208 is an air operated,two stage hydraulic pump with a 3-way, 2-position manual valve andan 8 litres reservoir.

Ordering Example

P A M - 2 4 08 S .

100 200 300 400 500 600 70000

2,0

4,0

6,0

8,0

10,0

FLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) EPAM-2000SPAM-2000at 7 bar air pressure

Air Inlet

AirPressure

Range

(bar)

4-74-74-74-74-74-74-7

AirConsumption

(l/min)

2400240024002400240024002400

SoundLevel

(dBA)

80-8580-8580-8580-8580-8580-8580-85

ReservoirSize

(litres) A B C D E F H

582040

304304460460

205205340340

335335

––

159191191320

––

5050

165165295295

335367367496

Pump Dimensions (mm)

H This is how an Air Hydraulic Pump model number is built up:

90

®


H Shown from left to right: PGM-3410R, PGM-2408R, PGM-5410R

Atlas Series, Gasoline Pumps

• Patented Genesis Technology means- coaxial piston design ensures high performance- first-stage piston pump for improved efficiency

• High by-pass pressures improve productivity• All Atlas pumps feature sturdy Roll Cages for use in tough

environments• 4, 8, 20 and 40 litres reservoirs for use with a wide range

of cylinders• Available in three four-cycle motor sizes: 1,8, 3,7 and 4,0 kW

Featuring GenesisTechnology

3,83,87,67,69,5

18,99,5

18,99,5

18,99,5

18,937,8

700700700700700700700700700700700700700


Single-Acting

Double-Acting

Single-Acting

Double-Acting


Usable Oil

Capacity(litres)

Used with Cylinder

PressureRating

(bar)

Output Flow Rate

(l/min)

ModelNumber

PGM-2308R*PGM-2408R*PGM-3310RPGM-3320RPGM-3410RPGM-3420RPGM-5310RPGM-5320RPGM-5410RPGM-5420RPGM-5440R

PGM-2304R*PGM-2404R*

3,23,23,23,27,87,87,87,87,87,87,87,87,8

0,660,660,660,660,900,900,900,901,61,61,61,61,6

H This PGM-5310R is used to power a hydraulic re-bar cutter on a construction site before powerwas available.

1st stage 2nd stage

Hoses:


specify only Enerpac hydraulic hoses.

Page: 106

Gauges



Page: 105

* Note: The PGM-20 series are available with a carrying handle instead of a rollcage. Forordering omitt the ‘R’ from the model number

® 91

Atlas Gasoline PumpPerformance

Elevation can affect theperformance of any gasoline engine. Atlas pumps are designed to developrated performance at elevations up to1500 m.

For applications above this elevation,please consult your Enerpac office.

Atlas Series, Gasoline Pumps

By-PassPressure

(bar)

Valve Type Valve Function Motor Size

(kW)

SoundLevel

(dBA)

Weight

(kg)

3-way, 3-position4-way, 3-position3-way, 3-position4-way, 3-position3-way, 3-position3-way, 3-position4-way, 3-position4-way, 3-position3-way, 3-position3-way, 3-position4-way, 3-position4-way, 3-position4-way, 3-position

Advance/Hold/Retract




89898989939393939393939393

1,8

1,8

3,7

4,0

25253333404040404884488493

PGMSeries

Reservoir Capacity:

4, 8, 20 and 40 litresFlow at Rated Pressure:

0,66-1,6 l/minMotor Size:

1,8- 4,0 kWMaximum Operating Pressure:

700 bar

3/8"-18NPT

558 444

3/8"-18NPT

558 444

571

Speed Chart

See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ section.

Page: 103

M

PGM-20 series

PGM-30 and PGM-50 seriesFLOW CHART

Oil

flow

(l/m

in)

E

Pressure (bar) E

20 Series Atlas30 Series Atlas50 Series Atlas

140140140140140140140140140140140140140

571

(8 a

nd 2

0 lit

res)

863

(40

litre

s)

92

®

Hydraulic Technology Worldwide800 Series, Gasoline Pumps

H Shown: EGM-8418

Locking Valves

Pumps with VM-4 manualvalves are available with VM-4L manual valves.Add suffix “L” to pumpmodel number.

Page: 122

Reservoir Capacity:

95 litresFlow at Rated Pressure:



700 bar

EGMSeries

M

• Industrial grade, 13,2 kW, twin-cylinder motor• Panel mounted pressure gauge and adjustable relief valve

for system pressure control• Two-speed pump design, with high by-pass pressure, for

rapid cylinder advance• Built in oil temperature and oil level gauge• External adjustable relief valve (80-700 bar) allows control

of operating pressure without opening the pump• Integral priming circuit guarantees quick starts after

transport


6868

700700

12,812,8

5,75,7

250250

403403

9494

Adv./Retr.Adv./Hold/Retr.

3-way, 2-pos.4-way, 3-pos.

EGM-8218EGM-8418

Usable Oil

Capacity(litres)

Used with Cylinder

PressureRating

(bar)

By-PassPressure

(bar)

Valve Type Valve Function SoundLevel

(dBA)

Weight

(kg)

Output Flow Rate

(l/min)

ModelNumber

1st stage 2nd stage

565

1168

990

Top View

ValveLocation

Relief Valve

Fill Port

Gauge Shut Off Valve

Drain Plug

Oil Level andTemperature GaugeGauge 700 bar

Priming Pump

FLOW CHARTO

il flo

w (l

/min

) E

Pressure (bar) E

800 Series

iii???

!!!93®

Yellow Pages Overview

94-95 E

96-97 E

98-99 E

100-101 E

102-103 E

104 E

✗

�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢

�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢

5 ton 30 ton 50 ton 75 ton

oad

NoLoad

NoLoad

NoLoad

LoadLoad

LoadLoad

1,3

14

44

10

2,8

26

4,1

43

0,8

1,4

4,1

1,4

2,8

2,8

4,1

4,1

11

35

8,1

2,2

20

3,3

34

6 0

1,1

3,2

1,1

2,2

2,2

3,3

3,3

6,0

6,3

20

4,8

1,3

12

1,9

20

3,6

0,6

1,9

0,6

1,3

1,3

1,9

1,9

3,6

4,4

14

3,3

0,9

8,3

1,3

14

2,5

0,4

1,3

0,

00

vel

Not recommended


PageSection

Safety Instructions

Pump Selection and

Selection Worksheet

Basic System

Set-ups

Basic Hydraulics

Conversion Tables

and Speed Charts

Valve Information

If selecting hydraulic equipment is not your

daily routine, then you will appreciate these

pages. The ‘Yellow Pages’ are designed to help

you work with hydraulics. They will help you to

better understand the basics of hydraulics, of

system set-ups and of the most commonly used

hydraulic techniques. The better your choice of

equipment, the better you will appreciate

hydraulics. Take the time to go through these

‘Yellow Pages’ and you will benefit even more

from Enerpac High Pressure Hydraulics.

T

A

Enerpacworked

hard to earn the qualityrating ISO 9001, in itsongoing pursuit ofexcellence.

ANSI B30.1

Our cylinders fullycomply with the criteriaset forth by theAmerican NationalStandards Institute(except ‘BRD’ and ‘CL’series).

UL approved

All electricalcomponents used onEnerpac products carrythe UL rating whenpossible.

IP 55F

All electric motors usedon Enerpac powerpumps meet thisprotection andinsulation classification.

DIN 20024

Enerpac thermoplastichoses are related to thecriteria set forth inDeutsche IndustrieNorm 20024.

CanadianStandardsAssociation

Where specified,Enerpac electric pumpassemblies meet thedesign, assembly andtest requirements of theCanadian StandardsAssociation.

Product DesignCriteria

All hydrauliccomponents aredesigned and tested tobe safe for use atmaximum 700 bar pressure unlessotherwise specificallynoted.

EMC Directive89/336/EEC

Where specified,Enerpac electric powerpumps meet therequirements forElectromagneticCompatibility per EMCDirective 89/336/EEC.

WorldStandardGuarantee

All Enerpac productsare guaranteed againstdefects in workmanshipand materials for aslong as you own them.

CE Marking & Conformity

Enerpacprovides a Declarationof Conformity and CEmarking for productsthat conform with theEuropean CommunityDirectives.

Enerpac ‘Yellow Pages’stand for

Hydraulic Information!

Enerpac is certified for several quality standards. Thesestandards require compliance with standards formanagement, administration, product development andmanufacturing.

Lifetime guaranteeEnerpac guarantees that Enerpac’s products will befree from defects in materials and workmanship foras long as they are owned by the Customer. Thisguarantee does not cover ordinary wear and tear,abuse, improper use (including repairs or attemptedrepairs other than by Enerpac or its authorizedservice representatives), alterations or productswhich have not been used or maintained inaccordance with Enerpac’s written instructions.

The foregoing warranty is exclusive and is in lieu ofall other express and implied warranties, includingbut not limited to implied warranties or merchan-tability and fitness for a particular purpose.

Enerpac, at its option, will authorize its authorizedservice representatives to repair or replace, orrefund the purchase price of, any products (or partsthereof) which are covered by this guarantee andwhich are found to be defective. If a claim arises,the Customer must contact Enerpac to arrangereturn shipment to Enerpac.

The remedy of repair, replacement of refund iscustomer’s exclusive remedy in the event of breachof this guarantee. Enerpac shall not be liable for anyincidental, consequential or special damages or forany loss, damage or expense arising from the sale,use or installation of the products or from any othercause whatsoever.

®


94

Safety Instructions

��yyyyzzzz{{||

Hydraulic power is one of thesafest methods of applyingforce to your work - when usedcorrectly. And to that end weoffer some DOs and DON’Ts,simple common sense pointswhich apply to practically allEnerpac hydraulic products.

The line drawings and applicationphoto’s of Enerpac productsthroughout this catalog are usedto portray how some of our

customers have used hydraulicsin industry. In designing similarsystems, care must be taken toselect the proper componentsthat provide safe operation and fityour needs. Check to see if allsafety measures have been takento avoid the risk of injury andproperty damage from yourapplication or system. Enerpaccan not be hold responsible fordamage or injury, caused by un-safe use, maintenance or

application of its products. Pleasecontact the Enerpac office or arepresentative for guidance whenyou are in doubt as to the propersafety precautions to be taken indesigning and setting up yourparticular system.In addition to these tips, everyEnerpac product comes withinstructions spelling out specificsafety information. Please readthem carefully.

✗ ✓ ✗ ✓

✗ ✓ ✗ ✓

✗ ✓

�y

✗ ✓

✗ ✓✗ ✓

��yy

✗ ✓ ✗ ✓

F Provide a leveland solid support for theentire jack basearea.

Jacks

Cylinders

F Never place anypart of your bodyunder the load.Ensure the load ison a solid support beforeventuring under.

F Provide a solidsupport for theentire cylinderbase area. Usecylinder baseattachment formore stability.

F Do not use cylinderwithout saddle.This will causeplunger to”mushroom”.Saddles distributeload evenly on theplunger.

F Always protectcylinder threadsfor use withattachments.

F The entire jacksaddle must be incontact with theload. Movementof the load to bein the samedirection as jackplunger.

F Remove the jackhandle when it isnot being used.

F The entire cylindersaddle must be incontact with theload. Movement ofthe cylinder must beparallel with themovement of theload.

F As with jacks,never place anypart of your bodyunder the load.Load must be oncribbing beforeventuring under.

F Keep hydraulicequipment awayfrom open fire andtempertures above65 °C (150 °F).

95®

Safety Instructions

��yyyy

��yz{|

��z|

Manufacturer’s rating of load and stroke are maximum safe limits.Good practice encourages using only 80% of these ratings!80% 80%

✗ ✓ ✗ ✓

✗ ✓

��yyyyyy

��yyyyyy

✗ ✓ ✗ ✓

��yy

✗ ✓✗ ✓

HYDRAULIC OIL

MAX. MAX.

HYDRAULIC OIL

✗ ✓

Willy

™

Brake Fluid

HYDRAULIC OIL

✗ ✓

F Don’t use handleextenders.Hand pumpsshould be easy tooperate whenused correctly.

Pumps

Hoses and couplers

F Fill pump only torecommendedlevel. Fill onlywhen connectedcylinder is fullyretracted.

F Clean bothcoupler partsbeforeconnecting.Use dust capswhen couplerparts are notconnected.

F Keep hoses awayfrom the areabeneath loads.

F Don’t lift hydraulic equipment by thehoses.

F Close release valvefinger tight. Usingforce will ruin thevalve.

F Use only genuineEnerpac hydraulicoil. Wrong fluid candestroy seals andpump and will renderyour warranty nulland void yourguarantee.

F Don’t kink hoses.Bending radiusshould be at least115 millimetres.Don’t drive over ordrop heavy objectson hoses.

• Lift slowly and check often

• Avoid standing in the line of force

• Anticipate possible problems and take steps to avoid them

✓ ✗ ✓F Always readinstructions andsafety warningsthat come withyour Enerpachydraulicequipment.

F Don’t override thefactory setting ofrelief valves. Always use agauge to checksystem pressure.

General

R=115 mm

F Detach cylinderonly when fullyretracted or useshut-off valves orsafety valves tolock-in cylinderpressure

< 25 mm25 mm50 mm75 mm

100 mm125 mm150 mm175 mm200 mm225 mm250 mm300 mm325 mm350 mm

®


96

Pump Selection

Flow*

Usable Oil Capacity

Duty Cycle**

Portable/Stationary***

Recommended Series

5 t 10 t 15 t 25 t 30 t 50 t 60 t 75 t 100 t 150 tH Stroke

Capacity (ton) E

Low (0,1 - 0,3 l/min)

Intermittent

Portable Portable

Economy Submerged Titan Hushh 8000/9000 Series

Stationary Stationary Stationary

Continuous ContinuousIntermittent Both

1,9 - 3,8 litres 5,7 litres 5 - 40 litres5 - 38 litres 60 litres

Medium (0,5 -2,0 l/min)

High (2,0 - 14,5 l/min)

* Flow • Determined by motor size• Directly affects electrical power requirements• Determines cylinder or tool speed

** Duty Cycle • Continuous would be applications requiring more than one hour of continuous pump use• Intermittent would be used less than one hour of continuous pump use

*** Portability Portable Stationary• Ergonomic handles • Mounting options• Flexible power requirements • Normally requires stable power

Note: Selection based on oil capacity requirements of cylinders.

H HAND PUMP AND SINGLE-ACTING CYLINDER MATCHING CHART

H POWER PUMP SELECTION CHART

Page: 80Page: 74Page: 66Page: 70Page: 64

P-392 P-80 P-462

Page: 56Page: 56Page: 54

97®

Selection Worksheet

Question: Tips/help Data Model Number

Total force required in tons: Total loadNumber of cylinders required: Number of lifting pointsForce per cylinder in ton: Should be 80% of total cylinder cap.Stroke required: Plunger travelSingle or double-acting (D/A): D/A used when pull force is required,

or retract speed is criticalType of plunger required: Hollow or solidCollapsed height required:Optional saddle required: Tilt, Grooved, Flat Cylinder base: Improves stabilityCylinder attachments: (RC-series) Expanded functions

Selected cylinder model: EIncluding coupler model:

Available power source: n Manual n Electric n Compressed Air n Petrol

Hand pump Not for high cycle applicationsSingle or double acting operation Use 4-way valve for D/A applications

Check speed chart on page 103 for number of mm per stroke)Selected hand pump: E

Electric or Compressed Air pumpNeed for portability:Duty cycle: Intermittent or highRequired usable oil capacity: Intermittent =1,2 x oil capacity

high cycle = 2 x oil capacityAvailable Voltage:Lifting speed (Important/not important): Use speed chart on page 103Type of control: Manual/remote pendantType of actuation/function: Advance/hold/retractAccessories: Roll bar, Caster kit, ...

Selected pump: EIncluding Coupler: Oil connection

Number of hoses and length required:Selected Hoses: E

Manifold or tee: EExtra hose per manifold (2): EGauge (ton, kN or bar scale): Glycerine for high cycle EGauge adapter: EFittings: EPressure Relief Safety Valve: ELoad-holding Valve(s): EHydraulic oil: E

CylinderSelection

H Complete the following information to select the right products:

PumpSelectionThe three mostcommonlyselectedpumps arehand pumps,electric pumpsand air-drivenpumps. Battery andgas poweredpumps, how-ever can beselected in thesame way.

SystemComponents

®


98

Basic System Set-ups

7



3 8

413 1

4

1011

M1 Cylinder Applies hydraulic force.Page 7

M2 Cylinder Base PlateFor applications like liftingwhere additional cylinder stability is required. Page 12

M3 PumpProvides hydraulic flow. Page 53

M4 HoseTransports hydraulic fluid.Page 106-107

M5 Male CouplerFor quick connection of thehose to system components.Page 108-109

M6 Female CouplerFor quick connection of thehose end to the system components.Page 108-109

M7 GaugeTo monitor pressure of thehydraulic circuit.Page 112-118

M8 Gauge adaptorFor quick and easy gaugeinstallation. Page 118

M9 Swivel connectorAllows proper allignment ofvalves and/or gauges. Usedwhen units being connectedcannot be rotated.Page 118

M10 Auto-Damper Valve V-10Used to protect gauge fromdamage due to suddenpressure pulses in the system.Needs no adjustment andallows correct positioning ofgauge, prior to tightening. Page 125

M11 4-Way Directional Control ValveControls the direction ofhydraulic fluid in a double-acting system.Page 122


7

9

3 8 4

5 1

6

Single-acting push application, such as in a press. The handpump offers controlled cylinder advance, but mayrequire many handpump strokes in longer stroke applicationswhen the cylinder capacity is 25 ton or above.

Examples of pump, hose and cylinder sets can be found onpage 50.

Single-acting cylinder with longer strokeused for lifting applications.

Double-acting cylinder set-up used for liftingapplications where a slow controlled descentof the load must be maintained.


7

9

6

3 8

4

2

1

99®



3 15

14 8

12

7

10 4

4 13 1


�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢


4

7

11

3

10

6

114

14481

15 4

Basic System Set-ups

�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢

15 14 8 4

7

8

10

7

2

13

1

4

12 3



Two point lifting set-up using single-acting cylinders.

Four point lifting set-up, using single-acting cylinders anddirectional control valves.

M12 3-Way Directional Control ValveControls the direction of hydraulic fluid in a single-acting system.Page 120

M13 Safety Holding ValveControls load descent in lifting applications.Page 124-125

M14 ManifoldAllows distribution of hydraulic fluid from one powersource to several cylindersPage 110

M15 Needle valveRegulates the flow of hydraulic fluid to or from the cylinders.Page 124-125

Double-acting cylinder set-up used in a push/pull application.

®


100

Basic Hydraulics

Flow Pressure

Pascal’sLaw

A hydraulic pump produces flow. Pressure occurs when there isresistance to flow.

Pressure applied at any pointupon a confined liquid istransmitted undiminished in alldirections (Fig.1).This means that when morethan one hydraulic cylinder isbeing used, each cylinder willlift at its own rate, dependingon the force required to movethe load at that point (Fig. 2).

Cylinders with the lightest loadwill move first, and cylinderswith the heaviest load will movelast (Load A), be it the cylindershave the same capacity.




To have all cylinders operateuniformly so that the load isbeing lifted at the same rate ateach point, either controlvalves (see Valve section) orSynchronous Lift Systemcomponents (see Cylindersection) must be added to thesystem (Load B).

Gauge

Pump

Load A

Load B

Synchronous Lift or Control Valves to provide uniform lifting of load.

Manifold

Figure 2

Figure 1

Cylinder

CAUTION!

When lifting or pressing,always use a gauge. A gauge is your ‘window’ to

the system. It lets you see what’s goingon. You will find the gauges in theSystem Components section.

Page: 105

101®

Basic Hydraulics

Use this formula to determineeither force, pressure oreffective area if two of thevariables are known.

Force The amount of force a hydrauliccylinder can generate is equalto the hydraulic pressure timesthe “effective area” of thecylinder (see cylinder selectioncharts).

HydraulicWorkingPressure

x=CylinderEffective

AreaForce

P x= AF

Example 1An RC-106 cylinder with 14,5 cm2 effective area operating at 700 bar will generate what force?Force = 7000 N/cm2 x 14,5 cm2 =101500 N = 101,5 kN

Example 2An RC-106 cylinder lifting 7000 kg will require what pressure?Pressure = 7000 x 9,8 N ÷ 14,5 cm2 = 4731,0 N/cm2 = 473 bar.

Example 3An RC-256 cylinder is required to produce a force of 190.000 N. Whatpressure is required? Pressure = 190.000 N ÷ 33,2 cm2 = 5722,9 N/cm2 = 572 bar.

Example 4Four RC-308 cylinders are required to produce a force of 800.000 N.What pressure is required? Pressure = 800.000 N ÷ (4 x 42,1 cm2) = 4750,6 N/cm2 = 476 bar.Remember, since four cylinders are used together, the area for onecylinder must be multiplied by the number of cylinders used.

Example 5A CLL-2506 cylinder is going to be used with a power source that iscapable of 500 bar. What is the theoretical force available from thatcylinder?Force = 500 N/cm2 x 366,4 cm2 = 1.832.000 N = 1832 kN.

Plunger

Force (Load)

Stroke

EffectiveArea

Cylinder OilCapacity

The volume of oil required for a cylinder (cylinder oilcapacity) is equal to theeffective area of the cylindertimes the stroke*.

* Note: these are theoretical examples and do not take intoaccount the compressibility ofoil under high pressure.

x=Cylinder

Oil Capacity

CylinderEffective

Area

CylinderStroke

Example 1:An RC-158 cylinder with 20,3 cm2 effective areaand 200 mm stroke requires what volume of oil?Oil Capacity = 20,3 cm2 x 20 cm = 406 cm3

Example 2:An RC-5013 cylinder has an effective area of 71,2 cm2 and a stroke of 320 mm. How much oil will be required?Oil Capacity = 71,2 cm2 x 32 cm = 2278,4 cm3

Example 3: An RC-10010 cylinder has an effective area of 133,3 cm2 and a stroke of 260 mm. How much oil will it require?Oil Capacity = 133,3 cm2 x 26 cm = 3466 cm3

Example 4: Four RC-308 cylinders are being used, each with an effective area of42,1 cm2 and a stroke of 210 mm. How much oil will be required?Oil Capacity = 42,1 cm2 x 21 cm = 884 cm3 for one cylinderMultiply by four to obtain the required capacity: 3536 cm3

Stroke

OilCapacity

CAUTION!

Enerpac oil will compress2.28% at 350 bar and 4.1% at 700 bar.

Page: 110

®


102

Conversion Tables

Pressure:

1 psi = 0,069 bar1 bar = 14,50 psi

= 9,8 N/cm2

1 kPa = 0,145 psi

Volume:

1 in3 = 16,387 cm3

1 cm3 = 0,061 in3

1 litre = 61,02 in3

= 0,264 gal1 USgal = 3785 cm3

= 3,785 l= 231 in3

Weight:

1 pound (lb) = 0,4536 kg1 kg = 2,205 lbs1 metric ton= 2205 lbs

= 1000 kg1 ton (short) = 2000 lbs

= 907,18 kg

Temperature:

To Convert °C to °F:T°F = (T°C x 1,8) + 32To Convert °F to °C:T°

C = (T°F – 32) ÷ 1,8

Other measurements:

1 in = 25,4 mm1 mm = 0,039 in1 in2 = 6,452 cm2

1 cm2 = 0,155 in2

1 hp = 0,735 kW1 kW = 1,359 hp

All capacities andmeasurements in the catalogare expressed in uniformvalues.The conversion chartprovides helpful informationfor their translation intoequivalent systems.

All ton values specified in thiscatalogue are metric tonnesand are for cylinder classidentification only. Please refer to the kN datafor calculations.

A = Collapsed heightB = Extended heightC = Cylinder body lengthD = Cylinder outside

diameterD1 = Cylinder widthE = Cylinder inside

diameterF = Plunger rod diameterG = Oil inlet threadH = Cylinder bottom to

advance portI = Cylinder top to retract

portJ = Saddle outside dia-

meterK = Cylinder rod protrusion

at collapsed heightL = Plunger centre to side

of base

M = Mounting holes to plunger centre

N = Length of smaller cylinder part

O = Plunger hole or threadof saddle

P = Plunger thread lengthQ = Plunger outside threadU = Bolt circle diameter of

mounting holesV = Thread of cylinder

mounting holesW = Collar thread X = Collar thread lengthY = Centre hole diameterZ = Internal base threadZ1 = Depth of internal base

thread

Dimensions shown in theSelection Charts of thecylinder section are identifiedon the relevant drawings bythe capital letter referenceslisted here: A for collapsedheight through Z1 for depthof internal base thread.

Key to cylinder dimensions

Key to measurements

Z

X

A

B

K

G

NH

X1

I

C

F

P

OJW

E

W

Y

V

U DM

Imperial to metric

1/161/8

3/161/4

5/163/87/161/2

9/165/8

11/163/4

13/167/8

15/16

1

Inches Decimal mm1,593,184,766,357,949,53

11,1112,7014,2915,8817,4619,0520,6422,2323,8125,40

.06

.13

.19

.25

.31

.38

.44

.50.56.63.69.75.81.88.94

1.00

103®

Cylinder Speed Charts

Cyl. Capacity E

Cyl. Capacity E

5 ton 10 ton 15 ton 25 ton 30 ton 50 ton 75 ton 100 ton

NoLoad

NoLoad

NoLoad

NoLoad

NoLoad

NoLoad

NoLoad

NoLoadLoad Load Load Load Load Load Load Load

3,9

17,6

25,3

61,4

197

3,9

3,9

3,8

3,9

7,4

1,7

7,8

11,2

27,1

87,1

1,7

1,7

1,7

1,7

3,3

1,2

5,5

7,9

19,3

61,8

1,2

1,2

1,2

1,2

2,3

0,7

3,4

4,9

11,8

37,9

0,6

2,6

3,7

9,0

29,0

0,7

0,7

0,7

0,7

1,4

0,6

0,6

0,6

0,6

1,1

0,3

1,6

2,3

5,5

17,7

0,3

0,3

0,3

0,3

0,7

0,2

1,0

1,5

3,5

11,4

0,2

0,2

0,2

0,2

0,4

0,2

0,8

1,1

2,8

8,8

0,2

0,2

0,2

0,2

0,3

P-391 54P-392 54P-80/801/84 56P-802/842 54P-462/464 56

ManualPump Type Page

5 ton 10 ton 15 ton 25 ton 30 ton 50 ton 75 ton 100 ton

NoLoad

NoLoad

NoLoad

NoLoad

NoLoad

NoLoad

NoLoad

NoLoadLoad Load Load Load Load Load Load Load

6,8

86

273

53

14

133

21

221

40

221

434

28

17

277

31

281

85

205

205

334

4,3

8,3

26

7,1

14

14

21

21

40

40

197

3,4

3,4

3,8

31

31

17

23

43

148

3,0

38

122

24

6,4

59

9,0

98

18

98

193

12

7,6

123

14

125

38

91

91

148

1,9

3,7

11

3,2

6,4

6,4

9,0

9,0

18

18

88

1,5

1,5

1,7

14

14

7,6

10

19

66

2,1

27

86

17

4,5

42

6,7

70

13

70

137

8,8

5,4

88

9,9

89

27

65

65

105

1,3

2,6

8,1

2,2

4,5

4,5

6,7

6,7

13

13

62

1,1

1,1

1,2

9,9

9,9

5,4

7,4

13

47

1,3

17

53

10

2,8

26

4,1

43

7,6

43

84

5,3

3,3

53

6,0

54

16

39

39

64

0,8

1,6

4,9

1,4

2,8

2,8

4,1

4,1

7,6

7,6

38

0,7

0,7

0,7

6,0

6,0

3,3

4,5

8,2

29

1,0

13

42

8,1

2,2

20

3,3

34

6,0

43

66

4,2

2,6

42

4,8

43

13

31

31

51

0,7

1,3

3,9

1,1

2,2

2,2

3,3

3,3

6,0

6,0

30

0,5

0,5

0,6

4,8

4,8

2,6

3,6

6,5

23

0,6

7,7

25

4,8

1,3

12

1,9

20

3,6

20

39

2,5

1,5

25

2,8

25

7,7

18

18

30

0,4

0,7

2,3

0,6

1,3

1,3

1,9

1,9

3,6

3,6

18

0,3

0,3

0,3

2,8

2,8

1,5

2,1

3,8

14

0,4

5,4

17

3,3

0,9

8,3

1,3

14

2,5

14

27

1,7

1,1

17

1,9

18

5,3

13

13

21

0,3

0,5

1,6

0,4

0,9

0,9

1,3

1,3

2,5

2,5

12

0,2

0,2

0,2

1,9

1,9

1,1

1,5

2,7

9,2

0,3

4,1

13

2,6

0,7

6,4

1,0

11

1,9

11

21

1,3

0,8

13

1,5

14

4,1

9,8

9,8

16

0,2

0,4

1,2

0,3

0,7

0,7

1,0

1,0

1,9

1,9

9,5

0,2

0,2

0,2

1,5

1,5

0,8

1,1

2,0

7,1

WalkPac™ 62Economy 64Titan 66Submerged 702000WS Serie 742000W Serie 743000WS Serie 743000W Serie 745000WS Serie 745000W Serie 748000/9000 Serie 80Turbo 84PA Serie 8610 Serie 872000S Serie 882000 Serie 88Atlas 20 Serie 90Atlas 30 Serie 90Atlas 50 Serie 90800 Serie 92

BatteryElectric(speed basedon 50 Hz)

Air(speed basedon 6,9 bar airpressure)

Petrol

Pump Type Page

No Load indicates the plungerspeed as the plunger extendstowards the load (1st stage).

Load indicates the plunger speedas the load is lifted at a systempressure of 700 bar (2nd stage).

Millimetres of Cylinder Plunger Travel per Hand Pump Plunger Stroke

Millimetres per Second of Cylinder Plunger Travel

H PowerSource

H PowerSource

Pump Oil Flow (cm3/min) x 10

Cylinder Effective Area (cm2) x 60

Example: At what speed (V) will the RC-308 (30 ton) cylinder movewhen powered by a 2000W Serie Hushh pump?

RC-308 Cylinder Effective Area = 42,1 cm2

2000W Serie pump oil Flow (no load) = 5100 cm3/min

Speed V =5100 cm3/min x 10

= 20,2 mm/sec42,1 x 60

To determine:

Cylinder plunger speed

An RC-308 cylinder (30 ton) is powered by a 2000W Serie Hushh pump. While lifting the load,the cylinder plunger travels at 2,2 mm per second.

While extendingtowards theload, thecylinder plungertravels at 20 mmper second.

Cylinder Speed

This chart will help youcalculate the time required foran Enerpac cylinder to lift aload when powered by a 700bar Enerpac hydraulic pump.The Cylinder Speed Chart canalso be used to determine thepump type and model bestsuited for an application whenyou know the plunger speedrequired.

To determine:

Best matching pump

Your 30 ton cylinder needs to move a load at aspeed of 2,2 mm per second. Simply go down fromthe top of the chart, to the value of 2,2 mm per

second. Followthe chart to theright to find thatthe 2000W SerieHushh pump ismost suitable foryour application.


NoLoad

NoLoad

NoLoad

NoLoad

LoadLoad

LoadLoad

41

,4

2,8

2,8

4 1

11

35

8,1

2,2

20

3 3

1,1

3,2

1,1

2,2

2,2

3,3

6,3

20

4,8

1,3

12

1,9

0,6

1,9

0,6

1,3

1,3

1,9

1 9

4,4

14

3,3

0,9

8,3

1,3

14

0,4

1,3

0,4

0,9

0,9

1,3

1,3

3,4

11

2,6

0,7

6,4

1,0

11

1 9

0,3

1,0

0,3

0,7

0,7

1,0

1,0

1,9

WalkPac™

Economy

Titan

Submerged

2000WS Serie

2000W Serie

3000WS Serie

3000W Serie

5000WS Ser

Pump Type

Not recommended


NoLoad

NoLoad

NoLoad

NoLoad

LoadLoad

LoadLoad

41

,4

2,8

2,8

4 1

11

35

8,1

2,2

20

3 3

1,1

3,2

1,1

2,2

2,2

3,3

6,3

20

4,8

1,3

12

1,9

0,6

1,9

0,6

1,3

1,3

1,9

1 9

4,4

14

3,3

0,9

8,3

1,3

14

0,4

1,3

0,4

0,9

0,9

1,3

1,3

3,4

11

2,6

0,7

6,4

1,0

11

1 9

0,3

1,0

0,3

0,7

0,7

1,0

1,0

1,9

WalkPac™

Economy

Titan

Submerged

2000WS Serie

2000W Serie

3000WS Serie

3000W Serie

5000WS Ser

Pump Type

Not recommended

Not recommended

Use the formula below to calculate cylinder plunger speed

Cylinder Plunger Speed =

(mm/sec)

Retract

The oil flowsfrom thepump andcylinder port A

to the tank T: the cylinderplunger will retract.

Hold

The oil flowsfrom the pumppressure portP to the tank

T. The cylinder port A isclosed: the cylinder plungerwill maintain its position.

Advance

The oil flowsfrom the pumppressure portP to the

cylinder port A: the cylinderplunger will extend.

Retract

The oil flowsfrom the pumppressure portP to cylinder

port B and from cylinder portA to tank T: the cylinderplunger will retract.

Hold

The oil flowsfrom the pumppressure port Pto the tank T.

The cylinder ports A and B areclosed: the cylinder plungerwill maintain position.

®


104 © Enerpac 1997

Valve Information

Directional Control Valves

AdvanceHoldRetract



3-Way Valves

are used with single-actingcylinders

Valves may be eitherpump mounted orremote mounted.

Pump Mounted

Valves may be eithermanually orsolenoid operated.

Manually Operated Solenoid Operated

Remote Mounted

4-Way Valves

are used with double-actingcylinders

Ways

The (oil) ports on a valve.A 3-way valve has 3 ports: pressure (P), tank (T), and cylinder (A).A 4-way valve has 4 ports:pressure (P), tank (T), advance (A) andretract (B).

Single-Acting cylinders require at least a 3-way valve, and can, under certain instances, be operated with a 4-way valve.

Double-Acting cylinders require a 4-wayvalve, providing control of the flow to eachcylinder port.

Positions

The number of control points a valve canprovide. A 2-position valve has the ability tocontrol only the advance or retraction of thecylinder. To be able to control the cylinderwith a hold position, the valve requires a3rd position.

Centre ConfigurationThe centre position of a valve is the positionat which there is no movement required ofthe hydraulic component, whether a tool orcylinder.

The most common is theTandem Centre. Thisconfiguration provides for

little to no movement of the cylinder and theunloading of the pump. This provides forminimum heat build-up.

The next most common is the Closed Centreconfiguration, which is used

mostly for independent control of multi-cylinder applications. This configurationagain provides for little to no movement ofthe cylinder, but also dead-heads thepump, isolating it from the circuit.Use of this type of valve may require somemeans of unloading the pump to preventheat build-up.

There are many more type of valves, suchas Open Centre and Float Centre. These valves are used mostly in complexhydraulic circuits and require other specialconsiderations.

P T

A B

A

P T

P

A

P T

A

P T

A

Single-acting cylinder

Controlled by a 3-way, 3-position valve.

P T

A

B

P T

A

B

Double-acting cylinder

Controlled by a 4-way, 3-position valve.

Advance

The oil flowsfrom the pumppressure portP to the

cylinder port A and fromcylinder port B to tank T.

P T

A

B




P T

A B

OpenCentre

A B

P T

FloatCentre

105®

A D

C B

E

E

AB

BB

3/8"-1

8NPT (7

x)

J

F

C

H

L

H

B

E

F

D

C

3/8"-1

8NPT (6

x)

AC

DB

A D

CB

ENERPAC System Components:

All the additional elements you need to

complete your high pressure hydraulic

system and get started.

Engineered to work with your Enerpac

cylinders, pumps and tools, all Enerpac

components are designed to the most

exacting standards.

With this complete line of hydraulic

hoses, couplers, fittings, manifolds, oil

and gauges, Enerpac has the accessories

to complement your system and ensure

the efficient operation, long life and

safety of your hydraulic equipment.

System Components Section Overview

G, HSGG

T

GFGP

C, FA

HFA

BFZFZ

700

BDDG

GA, VNV, FM

Hoses

Couplers

Hydraulic OilManifolds

Fittings

Hydraulic Force & Pressure Gauges

Hydraulic Pressure Gauges

Test System Gauges

Digital gauges

Gauge Accessories

106 E

108 E

110 E

111 E

112 E

114 E

116 E

117 E

118 E

Component Type Series Page

106

®

Hydraulic Technology Worldwide700-Series, High Pressure HosesH Shown from top to bottom: HA-7206, HC-7206, H-7206

Thermo-Plastic Safety Hoses (700-Series)• For demanding applications, featuring a 4:1 design factor• Maximum working pressure of 700 bar• Four layer design, including two high strength steel wire

braids• Outside jacket is polyurethane, to provide maximum

abrasion resistance• Exhibits low volumetric expansion under pressure to

enhance overall system efficiency• Crimped-on rubber strain relief for improved life and

durability on all models

Safety and Quality

WARNING !

• Do not exceed 700 barmaximum pressure.

• Do not handle hoseswhich are under pressure.

More safety instructions in our ‘Yellow pages’.

Page: 94

1/4" NPT

3/8" NPT

A-604

A-630

AH-604

AH-630

C-604

CH-604

H Hose End Couplings

H To prevent back pressure and to increase cylinder retraction speed, when using longhoses with single-acting cylinders, the Enerpac HC-7300 range of hoses with increasedinternal diameter is the best choice.

107®

High Pressure Hydraulic Hoses

Hose End Assemblies and Couplers*

InternalDiameter

(mm)Model Number

HoseLength

(m)

700-SeriesThermo-Plastic

Weight(kg)

End one End two

1/4" NPT

3/8" NPT

CH-604

3/8" NPT

1/4" NPT

3/8" NPT

A-630 AH-630 CH-604

3/8" NPT

A-604

AH-604

AH-630

C-604

CH-604

CH-604

3/8" NPT

CH-604

1,81,81,81,81,80,60,91,83,06,19,1150,91,83,00,60,91,83,01,80,91,83,00,91,83,06,11,8151,88,03,06,19,1151,83,06,1

1,1

1,00,50,70,91,42,84,57,0

1,1

1,01,5

1,01,31,80,81,01,52,91,17,01,61,62,44,57,3

11,50,42,55,1

6,4

9,7

––HB-7206QB–HC-7206QH-7202H-7203H-7206H-7210H-7220H-7230H-7250–HA-7206B–––HA-7206HA-7210HB-7206HC-7203BHC-7206BHC-7210BHC-7203HC-7206HC-7210HC-7220HC-7206CHC-7250CH-7306H-7308H-7310H-7320H-7330H-7350HC-7306HC-7310HC-7320

Hose Oil Capacity

When using greater hose lengths, it is sometimes necessary to fill thepump reservoir after filling the hoses.To determine the hose oil capacity, usethe following:

For 6,4 mm inside diameter hoses:Capacity (cm3) = 32,1699 x Length (m)

For 9,7 mm inside diameter hoses:Capacity (cm3) = 73,8981 x Length (m)

700Series

Inside Diameter:

6,4 and 9,7 mmLength:

0,6 -15 mMaximum Operating Pressure:

700 bar

* For technical information on couplers see next page.

108

®


3/8" High Flow Couplers• Standard equipment on most Enerpac cylinders• Recommended for use on all Enerpac pumps and cylinders

where space and porting permits• Includes “2-in-1” dust cap for use on male and female

coupler halves

3/8" High Pressure ‘Flush-face’ Couplers• Featuring “Push-to-connect” operation, to guarantee good

connection every time• Flush-face, zero-leak operation for minimal spillage• HTMA* recognized for safety and performance• Will not interchange with low pressure couplers

3/8" Regular Spee-D-Coupler®

• For medium duty applications with hand pumps as an example

• Includes female aluminium dust cap

1/4" Regular Coupler• For use with small cylinders and hand pumps• Includes female aluminium dust cap

* Hydraulic Tool Manufacturers Association

Hydraulic Couplers

Facilitating Quick Connection ofHydraulic Lines

H Shown: CR-400, FR-400, FH-604, AR-400, AH-604, A-630

Thread sealer

To seal NPT threads use oneof the new anaerobic threadsealers or Teflon paste. When using Teflon Tape,

apply the tape one thread from the endof a fitting to prevent it from winding upin the hydraulic system.

WARNING!Couplers should bepressurized only whencompletely connected and

should not be coupled or uncoupledwhen pressurized.

More safety instructions in our ‘Yellow Pages’.

Page: 94

109®

CR-400

FR-400

AR-400

AR-630

Hydraulic Couplers

CompleteSet

MaximumFlow

Capacity(l/min)

Female Half

Male Half

DustCap(s)

A* B C D E F G

CH-604

FH-604

AH-604

AH-630

69

110

77

66

54

72

42

35

3/8"

NPT

3/8"

NPT

3/8"

NPT

1/4"

NPT

35

31

28

22

27

31

26

20

23

26

23

19

22

28

19

15

40

40

7,6

7,6

(2x)CD-411

–

Z-410femaleonly

Z-640femaleonly

BA

CDCE

F G

C-604

BA

CD

G

CE

F

F-604

BA

CDCE

F

A-604 and A-630

Coupler Type

High-Flow Coupler

Metal Dust Caps

Aluminium dust caps areavailable for the C-604 seriescouplers. Order model number: CD-411M for female halfCD-415M for male half

ACFSeries

Maximum Flow Capacity:

40 l/minThread:

1/4" and 3/8" NPTMaximum Operating Pressure:

700 bar

Flush-Face coupler

Regular Spee-D-Coupler©

Regular Coupler

C-604

F-604

A-604

A-630

Model Numbers Dimensions (mm)

* Value A is total length when male and female half are connected.

110

®


Use only genuineEnerpac Hydraulic Oil.The use of any otherfluid will render yourEnerpac warranty nulland void.

Hydraulic Oil, Manifolds and Fittings

178 mm Long Manifold with 7 female ports

369 mm Long Manifold thatallows direct mounting ofcontrol valves to the manifold.Plugs .38 NPTF.

6-Port Hexagon Manifold.Plugs furnished for all ports3/8"-18 NPTF.

Premounted Manifold

Functions as split-flow valveto control two single-actingcylinders simultaneously.

A-64

A-65

A-66

AM-2

32

32 38 3838 32

3/8"-18NPT (7x) 5076

6,3 89

178

32

32 102102102 32

3/8"-18NPT (7x) 83203

6,3 184

369

3/8"-18NPT (6x)

41

1/4"-20UNC

58

50

38

6

21

20

45

ø40

3045

93

110

70

Description Dimensions (mm)ModelNumber

• Maximum pumpvolumetric efficiency

• Maximum internal heattransfer

• Prevents pump cavitation

• Additives prevent rust,oxidation and sludge

• High viscosity index• Maximum film protective

lubricity

1 litre5 litres60 litres

HF-95XHF-95YHF-95Z

Model Number

Contents

H Shown : A-65, FZ-1625, HF-95Y, FZ-1634, FZ-1607, A-64, AM-2

The Genuine Range

Hydraulic Oil

Manifolds

A-64 A-65

111®

Hydraulic Oil, Manifolds and Fittings

B

AD

C

A

DC

B

A

DC

B

A

DC

B

A

C

CB

A

C

CB

A

BC

C

A

DC

B

A

C D

B

Model Number Dimensions (mm)

Recommended Tubing

Enerpac does not supply high-pressure pipe or tubing, but recommends the useof cold drawn steel tubing instead of regular pipe in the following dimensions:In place of .25" pipe, use 13 mm O.D. x 11 ga. (3 mm) wall.In place of .38" pipe, use 9 mm Schedule 80 seamless pipe.In place of .50" pipe, use 21 mm O.D. x .4 mm wall.This tubing can be threaded with standard pipe threading dies.

ABFZFZHFSeries

AdaptorFrom:

M14 x 1,51/4”-NPT1/4”-NPT1/2”-NPT

To:3/8”-NPT3/8”-NPT1/8”-NPT3/8”-NPT

47

44

30

42

24

23

19

28

3/8”-18 NPTF1/4”-18 NPTF1/8”-27 NPTF3/8”-18 NPTF

M14 x 1,53/8”-18 NPTF1/4”-18 NPTF1/2”-14 NPTF

BFZ-16322FZ-1055FZ-1642FZ-1634

A

C D

B

AdaptorFrom:

G 1/4”

G 1/4”

G 3/8”

G 3/8”

To:1/4”-NPT1/8”-NPT1/4”-NPT3/8”-NPT

35

31

43

43

19

19

24

24

1/4”-18 NPTF1/8”-27 NPTF1/4”-18 NPTF3/8”-18 NPTF

G 1/4”

G 1/4”

G 3/8”

G 3/8”

BFZ-16411BFZ-16421BFZ-16323BFZ-16324

ReducerFrom:3/8”-NPT1/4”-NPT3/8”-NPT

To:1/4”-NPT1/2”-NPT

G3/8”

Elbow

Tee

19

28

19

19

22

19

1/4”-18 NPTF1/4”-18 NPTF

G 1/4”

3/8”-18 NPTF1/2”-14 NPTF3/8”-18 NPTF

FZ-1630BFZ-1630BFZ-16301

CrossFrom: 3/8”-NPT Female

To: 3/8”-NPT Female

45 25 3/8”-18NPTF –FZ-1613

Coupling

Street ElbowFrom: 3/8”-NPT Male


23 33 3/8”-18 NPTF 3/8”-18 NPTFFZ-1616

Hexagon Nipple

Reducing ConnectorFrom: 3/8”-NPT Female


From: 1/2”-NPT Female


28

47

25

29

3/8”-18 NPTF

1/2”-14 NPTF

1/4”-18 NPTF

3/8”-18 NPTF

FZ-1615

FZ-1625

A B C D

Fittings 700 bar

From:1/4”-NPT3/8”-NPT3/8”-NPT

To:1/4”-NPT3/8”-NPT3/8”-NPT

38

51

37

16

19

19

1/4”-18 NPTF3/8”-18 NPTF3/8”-18 NPTF

1/4”-18 NPTF3/8”-18 NPTF3/8”-18 NPTF

FZ-1607FZ-1619FZ-1617

From:3/8”-NPT1/4”-NPT


36

29

23

19

3/8”-18 NPTF1/4”-18 NPTF

3/8”-18 NPTF1/4”-18 NPTF

FZ-1614FZ-1605

From:3/8”-NPT1/4”-NPT3/8”-NPT

To:3/8”-NPT1/4”-NPT3/8”-NPT

45

45

57

25

243/8”-18NPTF

3/8”-18 NPTF1/4”-18 NPTF3/8”-18 NPTF

–

–

–

FZ-1612FZ-1637FZ-16312

From:3/8”-NPT1/4”-NPT


33

36

20

24

3/8”-18 NPTF1/4”-18 NPTF

–

–

FZ-1610FZ-1638

112

®


All CylindersAll CylindersAll CylindersAll 5 ton CylindersAll 10 ton CylindersAll 25 ton CylindersAll 50 ton Cylinders 13 ton RCH-SeriesRCH-202, 302, 603RCS-201, 302 RCS-502, 1002 10 ton Press25 ton Press50 ton Press25-50 ton H-Frame 100 ton H-Frame200 ton H-Frame


Auto-Damper Valve

For automatic control ofgauge fluctuations, the V-10Auto-Damper Valve controlsthe movement of the gauge

needle by restricting oil flow in and outof the gauge. No adjustments needed.

Page: 125

Used With

• Calibrated to read in bar, kN or ton• Excellent readability:

gauge face dimensions 100 mm• Fast, easy installation

Visual Reference ofSystem Pressure

H Multiple pressure gauges are used to monitor system performance,maintaining process accuracy.

H Shown from left to right: GF-20S, GF-813S, GP-10S

113®

GP-10SGP-15SGP-10L*GF-5SGF-10SGF-20SGF-50SGF-120GF-813SGF-230GF-510GF-10SGF-20SGF-50SGF-835GF-871GF-200S

GP-10SGP-15SGP-10L*GF-5SGF-10SGF-20SGF-50SGF-120GF-813SGF-230GF-510GF-835GF-871GF-200S

5066505050505057385757505050


Gauge AdaptorThreadUnits per Division ModelNumber

Model Number

DepthA

(mm)

bar kN ton GA-1 GA-2 GA-3

Accuracy, % of full scale:

± 2%

Face Diameter:

100 mm

Pressure Range:

0-1000 bar

0 - 7000 - 10000 - 700

––––––––––––––

–––

0 - 450 - 90

0 - 2250 - 4500 - 105

–0 - 175 / 2750 - 450 / 900

0 - 900 - 2250 - 450

–0 - 675 / 900

0 - 1350 / 1800

––––––––

0 - 20/30/600 - 20/300 - 50/100

–––

0 - 25/30/500 - 75/1000 - 150/200

10 bar10 bar10 bar0,5 kN1 kN2 kN5 kN1 kN1 ton

1 ton + 2 kN1 ton + 5 + 10 kN

1 kN2 kN5 kN

5 + 10 ton2 ton + 10 kN

5 + 4 ton + 10 kN

1/2" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/4" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/2" NPT

1/4" NPT

1/4" NPT

1/4" NPT

* GP-10L is a L-Fitting type, including a V-10 Auto Damper Valve.

GFGPSeries

Gauge Type and Calibration

Required

••••••••

•••••

••••••••

•••••

•

•••

A100

Pressure Gauges

To measure the input pressureinto cylinders or high pressuresystems. Also for all testingapplications.

Load Gauges

To measure external load supported by a cylinder or jack in ton or kN. For pressing parts together under pre-determined loads, weighing, testing, etc.

Maximum IndicatorPointer

Indicator retains peakreadings of pressure or forcegenerated by the system.

Order model number: H-4000M.

Note: for 100 mm gauges only.

118

114

®

Hydraulic Technology WorldwideHydraulic Pressure Gauges

H Lifting the recommended way with shut-offvalve and pressure gauge.

H Gauges shown: 4048L, 2011R, 2501L, SSG-2512L, SSG-2518L, H-4048L, H-4070L

Maximum IndicatingPointer

Indicator retains peakreadings of pressure or forcegenerated by the system.

Order model number: H-4000M.

Note: For use on H-Series of gauges only.

Glycerine Filled (G-Series)• All pressure sensing parts sealed and dampened by

glycerine for long life• Includes safety blow-out disk and pressure equalling

membrane• Gauge snubbers or needle valves recommended for high

cycle applications

Standard Dry (2500 and 4000-Series)• These economical gauges are the best selection for

general purpose applications• Gauge snubbers or needle valves recommended for high

cycle applications

Stainless Steel (SSG-Series)• Features solid front and safety blow-out in rear• Corrosion resistant stainless steel construction• Glycerine filled for dampening hydraulic pulsation and

equipment vibration

High Cycle (H-Series)• Ideal for use in many applications, specifically for high-

cycle and harsh environments• Gauge snubbers or needle valves recommended to shut

off gauge when not in use

Visual Reference ofSystem Pressure

Gauge adaptor

For easy gauge installationinto almost any system,Enerpac offers a completeline of gauge adaptors.

Page: 118

115®

Size

Dimensions (mm)

Connection A B C D E

Model Number

Hydraulic Pressure Gauges

A

D

B

C

BC

E


±1% to 3%

Face Diameter:

63-100 mm

Pressure Range:

0-1000 bar

GHSSGSeries

0-20-40-7

0-110-130-200-400-70

0-1400-2000-4000-700

0-10000-10-40-7

0-110-140-20

0-1400-2000-3500-70

0-2000-3500-7000-4000-700

0-1000

G2507LG2508LG2509LG2510LG2511LG2512LG2513LG2514LG2515LG2516LG2517LG2535LG2536L2507L2509L2510L2511L2512L2513L2516L2517L2518L

SSG2514LSSG2516LSSG2518LSSG2519L

–––

–G2525RG2526RG2527R

–G2529RG2530RG2531RG2532RG2533RG2534RG2537RG2538R

––––––––––––––––

––––––––––––––––

2529R2530R

–––––––––––

G4007LG4008LG4009LG4010LG4011LG4012LG4013LG4014LG4015LG4016LG4017LG4088LG4089L

–––

4011L–––––––––

H4048LH4049LH4050L

–––––––––

G4037LG4038LG4039LG4040L

–––––––––––––

H4070LH4071LH4072L

0,511115

10101050

1001001000,111115

105050105050

100–––

0,20,511225

10202050

100100

–––1–––––––––

50100100

0,050,10,10,20,20,51125

1010200,20,10,10,20,20,5255155

10–––

0,020,050,10,10,20,20,51225

1010–––––––––––––5

1010

G-Series

Standard Dry Series

SSG-Series

H-Series

1/4 NPTF

Lower Mount

PressureRange

(bar)

Gauge Series

1/4 NPTF

Center Rear

Face1/4 NPTF

Bottom Rear

1/4 NPTF

Lower Mount

1/2 NPTF

Lower Mount

Major Graduation Minor Graduation

636363

100100

Lower MountCenter RearBottom RearLower MountLower Mount

636363100100

3737272949

84––

121136

–63–––

1/4" NPTF

1/4" NPTF

1/4" NPTF

1/4" NPTF

1/2" NPTF

Note: dimensions for reference only.

H SELECTION CHART

Size 63 mm Size 100 mm ø63 mm

(bar) (bar) (bar) (bar)

ø100 mm ø63 mm ø100 mm

116

®

Hydraulic Technology WorldwideTest System Gauges

TSeries


±1%

Face Diameter:

152 mm

Pressure Range:

0 - 3500 bar

• ±1% full scale accuracy on all models• All gauges have spring-loaded backs with rubber blow-out

plugs to protect case assembly in case of over-pressurization

• 2800 and 3500 bar models include flange mounting• 1/2" NPTF versions are made of high strength alloy steel• 0,25" cone models are made of 316 stainless steel, with

403 stainless steel on 2800 and 3500 bar models

PressureRange

(bar)

Alloy Steel

1/2" NPT

StainlessSteel

.25" Cone

NumberIntervals

Gradu-ationInter-vals

0 - 700 - 3500 - 700

0 - 14000 - 21000 - 28000 - 3500

T-6001LT-6002LT-6003L

––––

T-6005LT-6006LT-6007LT-6008LT-6009LT-6010LT-6011L

1050

100200200500500

15

1020202050

Model Number

Cone Mount GaugeAdaptor

Contains fittings to connect0,25" cone fitting gauge to 0,38" cone system.

Kit includes 43-301 tee and 43-704gauge adaptor. Order model number: 83-011.

Cone Mount GaugeConnector

For connecting gauges with0,25" cone fitting directly tomodel number 11-100 or

11-400 pump (page 60). May be usedwith other 0,25" cone systemsOrder model number: 43-704

Lens and Needle Kit

Replacement lens and dragpointer for Test Systemgauges.

Order model number: T-6000M

H An Enerpac P-2282 hand pump equipped with aT-6011L test system gauge is used for proofpressure testing of hydraulic valves.

Page: 61

H Gauge shown: T-6011L

117®

Digital, Hydraulic Pressure Gauges

• Each gauge includes: pressure transducer, power transformer, UL/CSA approved line interconnect cordand screwdriver

• 10 psi/1 bar increments in large, easy-to-read digits• Angle bracket in BDGB-1, PDGB-1, BDGL-1 and BDGP-1

and DIN case allows easy mounting• Zero set screw easily adjusts to zero gauge as needed• Solid state design; no moving parts• -1°C up to 54°C operating temperature

Battery Operation

Model BDGB-1 and BDGP-1may be operated by an 8 to18 VDC battery power supplywhen used in remote

applications. The 1,8 m power cord isstandard included, but is also separatelyavailable under model number DGC-1.

Gauge adaptor

For easy gauge installationinto almost any system,Enerpac offers a completeline of gauge adaptors.

47

95 139

PDGB-1PDGP-1PDGL-1BDGB-1BDGP-1BDGL-1

ReadsHydraulicPressure

up to 700 bar

ModelNumber

Retains Peak Value

AdjustableHydraulicPressure

Limit

•

•

•

•

•••

H Shown from left to right: BDGL-1, BDGP-1, BDGB-1 BDG/PDGSeries


± 0,5%

Voltage:

230 Volt

Pressure Range:

0 -10.000 psi/700 bar

H An Enerpac digital gauge is used on a bench press to provideprecise, easy to read pressure readings for testing.

Page: 118

ReadsHydraulicPressure

up to 10.000 psi

•••

118

®


Needle Valves (V- and NV-Series)• Both NV-25 and V-9 provide positive shut-off• 303 stainless steel stem, 16 threads/in (NV-25)

Swivel Adaptor (GA-918)• Simplifies gauge installation and reading

GA/NV/V/FMSeriesOperating Pressure:

700 bar

C F

E

F

B

A

D

120˚

A

B

C

D E

F

A

F

EB

C

63 mm Standard Dry63 mm Glycerine100 mm Standard Dry100 mm Glycerine

FM-25FM-25GFM-40FM-40G

21242147

19211921

6363

100100

8585

132132

GaugeType

ModelNumber

Model Number

Orifice(mm)

ThreadSize A B C E F

ModelNumber

GaugePort(NPTF)

Male End(NPTF)

Female End(NPTF)

Dimensions (mm)

Dimensions (mm)

Dimensions (mm)

A B C D E F

Dimensions (mm)

CBA

117 43 1/2" NPT 28,5 1/2" NPT 28 38

D E S S1

ModelNumber A B C D E

NV-25V-9

GA-1GA-2GA-3GA-4

GA-918

1/2"1/2"1/4"1/2"

3/8"3/8"3/8"1/4"

71139133111

31352535

32323532

1/2" NPT

1/2" NPT

1/4" NPT

1/2" NPT

3/8" NPT

3/8" NPT

3/8" NPT

1/4" NPT

3/8" NPT

3/8" NPT

3/8" NPT

3/8" NPT

57

8892

2631

5463

6363

2225

1/4" NPTF

1/2" NPTF

3 Ø on 74 Ø B.C.

4 Ø on 116 Ø B.C.

Front Flange Mountings (FM-Series)• For panel mounting of “G” Series and ‘Standard Dry’ Series of gauges• 63 mm and 100 mm may require drilling of gauge cases for installation

Gauge Adaptors (GA-Series)• For easy mounting of a pressure gauge onto your system• Male end screws into pump or cylinder port, female end accepts hose or

coupler, 3rd port is for gauge connection• GA-918 provides for swivel connection

Gauge Accessories

3/8"

GA-2, GA-3, GA-4

GA-1

A

S

E BCD

S1 S

F

E

F

CB

A

D

H Shown: GA-1, GA-2, GA-3, GA-918, NV-25, V-9, FM-25

119®

Valves Section Overview

L

Q

K

NJ

P

E

HM

R

DC

B

A

3/8"-1

8NPT

1.53

7.62 max.

3.12

ø1.503/8"-18NPT (3x)

4.53

ENERPAC hydraulic valves are

available in a wide variety of models

and configurations and are rated for a

700 bar operating pressure. Available

for pump mounted operations or

remote mounting and manual or

solenoid actuation, making your

application requirements easy to solve.

Whether you require directional

control, flow control, or pressure

control, there is an Enerpac valve to

match your application exactly.

V

BV, V

BV, V

3-Way DirectionalControl Valves

4-Way DirectionalControl Valves

Pressure and FlowControl Valves

120 E

122 E

124 E

Valve Type Series Page

120

®

Hydraulic Technology Worldwide3-Way Directional Control Valves

ValveLocation

PumpMounted

RemoteMounted

ValveOperation

ValveType

2-position

3-position,Closed Center

RemoteMounted

3-position,Closed Center,

Locking

RemoteMounted

3-position,Tandem Center

PumpMounted


H Shown from left to right: BVS-3, VM-2, VM-3, VM-3L, VC-3, VC-3L

PumpMounted

RemoteMounted



PumpMounted

3-pos., TandemCenter, Locking

RemoteMounted

3-pos., TandemCenter, Locking

• 3-way, 3-position valves provide advance/hold/retractoperation for use with single-acting cylinders

• Manual or solenoid operation• Remote or pump mounting on most Enerpac pumps• Return line kit VRL-10 included with remote valves• Available ‘locking’ option on VC and VM Series valves for

load-holding applications• Standard ‘locking’ feature on BV Series valves

Push-Button ControlStation

Solenoid valves are suppliedwith 2,4 meter power cordand push-button control

station IC-300 with 3 m control cord.

H A typical multi-cylinder control set-up using V, VC and VM Series Valves.

For Reliable Controlof Single-ActingCylinders

Manual

Manual

Manual

Solenoid24 VAC

Solenoid24 VAC

Manual

Manual

Manual

Manual

121®

3-Way Directional Control Valves

BV VSeries

Flow Capacity:


700 bar

36 47

130

138

28

1279146

ø8 (6x)

2820

15

6382

3/8"-18NPT

2,2

2,1

2,9

3,9

4,7

2,9

4,7

10,3

9,4

ModelNumber

Schematic Flowpath

Advance Hold Retract

HydraulicSymbol

Weight

(kg)

VM-2

VC-15

VC-15L

BVR-3

BVS-3

VM-2

BVR-3, BVS-3 1) BVR-3 onlyVC-3, VC-3L, VC-15, VC-15L

1) VC-3L and VC-15L only

VM-3, VM-3L 1) VM-3L only

P

A

P

A

P

A

P T

A

P T

A

A

P

A

T P

A

T P

A

P T

A

P T

VM-3

VC-3P

A

P T

A

P T

AA

P T

VM-3L

VC-3LP

A

P T

A

P T

A

A

P T

A

P T

A

P T

Valving Help

See Basic System Set-Up andValve Information in our‘Yellow Pages’

Page: 98

Additional Fittings

For additional fittings seeour ‘System ComponentsSection’.

Page: 111

Locking Valves

For applications that requirepositive load holding, mostVC and VM Series valves areavailable with a pilot-

operated check valve. This optionprovides hydraulic locking of the loaduntil the valve is shifted into the retractposition.To order this feature, place an “L” at theend of the model number.

Valve dimension in mm

122

®

Hydraulic Technology Worldwide4-Way Directional Control ValvesH Valves shown: VC-4L, VC-20, BVS-4, VM-4, BVR-4, VM-4L

ValveLocation

RemoteMounted

ValveOperation

Manual

ValveType

3-position,Closed Center

RemoteMounted

Manual 3-position,Closed Center,

Locking

RemoteMounted

Solenoid24 VAC


PumpMounted

Solenoid24 VAC


PumpMounted

RemoteMounted

Manual 3-position,Tandem Center

Manual 3-position,Tandem Center

PumpMounted

Manual 3-pos., TandemCenter, Locking

RemoteMounted

Manual 3-pos., TandemCenter, Locking

Push-Button ControlStation

Solenoid valves are suppliedwith 2,4 meter power cordand push-button control

station IC-400 with 3 m control cord.

• 4-way, 3-position valves provide advance/hold/retractoperation for use with double-acting or two single-actingcylinders

• Manual or solenoid operation• Remote or pump mounting on most Enerpac electric

pumps• Return line kit VRL-10 included with remote valves• Available ‘locking’ option on VC and VM Series valves for

load-holding applications• Standard ‘locking’ feature on BV Series valves

H A 4-Way directional control valve together with a pressure relief valveare used here to control a double-acting cylinder.

For Double-ActingCylinder Control

123®

4-Way Directional Control Valves

VSeries

Flow Capacity:


700 bar

2,1

2,9

3,9

4,7

2,9

4,7

12,0

11,1

ModelNumber

Schematic Flowpath

Advance Hold Retract

HydraulicSymbol

Weight

(kg)

VC-20

VC-20L

BVR-4

BVS-4

P T

A

B

P T

A

B

P T

A

B

T P

B

A

T P

B

A

T P

B

A

A

P T

B

VM-4

VC-4P T

A

B

P T

A

B

P T

A

B

P T

A

B

P T

A

B

P T

A

B

A

P T

B

VM-4L

VC-4L

P T

A B

P T

A B

A B

P T

BVR-4, BVS-4 1) BVR-4 onlyVC-4, VC-4L,VC-20, VC-20L

1) VC-4L andVC-20L only

VM-4, VM-4L 1) VM-4L only

Valving Help

See Basic System Set-Up andValve Information in our‘Yellow Pages’

Page: 98

Additional Fittings

For additional fittings seeour ‘System ComponentsSection’.

Page: 111

Locking Valves

For applications that requirepositive load holding, mostVC and VM Series valves areavailable with a pilot-

operated check valve. This optionprovides hydraulic locking of the loaduntil the valve is shifted into the retractposition.To order this feature, place an “L” at theend of the model number.

Valve dimension in millimetres.

124

®

Hydraulic Technology WorldwidePressure and Flow Control Valves

• All valves are rated for 700 bar operating pressure• All valves feature NPTF porting to insure against leakage at

rated pressure• All valves are painted, coated, or plated for corrosion

resistance

H Valves shown from left to right: V-66, V-9, V-152, V-17, V-42, V-161, V-10, V-82, V-66F

V-82 V-182 V-8F

V-10 V-17 V-42

V-9

V-66 V-66F V-152 V-161

Valve Dimensions in mm

Your HydraulicControl Solution

H The V-152 Pressure relief valve limitsthe pressure or force developed in thehydraulic system.

125®

Pressure and Flow Control Valves

VSeries


700 bar

Needle ValveV-82V-182V-8F

Snubber ValveV-9

Auto Damper®

ValveV-10

Check ValveV-17

Pilot OperatedCheck ValveV-42

Manually OperatedCheck ValveV-66V-66F

Pressure Relief ValveV-152

Sequence ValveV-161

Hydraulic Symbol

V-82: To control cylinder speed. Can also be used as shut-off valvefor temporary load holding. 3/8" NPTF female ports.V-182: Same as V-82, but with

1/4" NPTF female ports. Also suitablefor gauge snubbing (also V-82).V-8F: Like V-82, but with very finemetering for precise flow control.Not recommended as shut-off valve.

V-9: Infinitely adjustable for meteringoil out of a gauge to preventsnapping of gauge pointer whenload or pressure is suddenlyreleased. Also suitable as shut-off

valve to protect the gauge duringhigh cycling applications. 1/2" NPTF

male and female threads for use withGA-1, GA-2 or GA-4 gaugeadaptors.

V-10: To be used when gaugepressure must be monitored duringhigh cycle applications. Creates aflow resistance when load isreleased suddenly.

No adjustments are necessary. 1/2" NPTF male and female threads foruse with GA-1, GA-2 or GA-4 gaugeadaptors.

V-17: Ruggedly built to resist shockand operate with low pressure drop.Closes smoothly without pounding. 3/8" NPTF female ports.

V-42: Can be mounted at thecylinder to hold the load in case ofsystem pressure loss. Normally usedwith double-acting cylinders wherepilot port receives pressure from a

Tee-fitting in the cylinder retract line.3/8" NPTF female ports.

V-66: Used for load holdingapplications with single and doubleacting cylinders. Valve is manuallyopened to allow oil to flow back totank when cylinder retracts.

V-66F: Similar to V-66, but with veryfine metering capability for preciseflow control.

V-152: Limits pressure developed by the pump in hydraulic circuit, thuslimiting the force imposed on othercomponents. Valve opens wheneverpreset pressure is reached.

To increase pressure setting, turnhandle clockwise. Includes:• 0,9 m return line hose kit, • ±3% repeatability, • 55-700 bar adjustment range.

V-161: To control oil flow to asecondary circuit. Flow is blockeduntil system pressure rises to the V-161 setting. When this pressurelevel is reached, the V-161 opens to

allow flow to the secondary circuit. Apressure differential is alwaysmaintained between the primary andsecondary circuit. Min. operating pressure: 140 bar.

Valve Type and Model Number Description

Valve Applications

To see these valvesused in typical hydrauliccircuits, please see our‘Yellow Pages’.

Page: 98

AP

Fittings

For additional fittingssee the fitting page ofthe System Componentssection.

Page: 111

G

A

®


K

K

C

D

G

B

F

J

A

Enerpac Hydraulic Presses

These Press features increase productivity andbroaden the range of applications:

Standard on 50, 100and 200 ton H-Framepresses with double-acting cylinder, theexclusive “Hydrajust”bed positioning,allowing adjustment ofupper and lower bed.

On 50, 100 and 200ton presses the pumptable can be movedsideways allowingside-loading ofworkpieces.

Optional “V-blocks”for positioning ofcomplex parts, aredesigned with high-strength steel for longlife.

ENERPAC Hydraulic Presses are available in a

variety of capacities and sizes. The press frames

are welded for maximum strength and

durability. Strong frames and powerful high-

pressure hydraulics will provide years of

dependable service in many applications.

Enerpac Presses are available in Bench,

C-frame, Arbor, H-frame, Workshop and

Roll-frame models.

For safety reasons, all Enerpac presses with air

and electric-drive pumps can be supplied with

hand operated valves. This allows operation

only when the valve handle is hand-held in the

appropriate position. Once released, the valve

automatically returns to the centre (hold)

position.

126

J

F

B

D

CG

J

E

H

127®

U

V

Z

Y

380*

WT60

50

14015

0

Press Section Overview

B

SOP

SOP

BPR

A

A

TMLH

128 E

132 E

132 E

134 E

136 E

136 E

138 E

139 E

Capacity

ton(kN)

Press type and functions Serie Page

10-200(101-1995)

10-100(101-933)

10(101)

50-200(498-1995)

5-20(45-178)

10-30(101-295)

10-200(101-1995)

900-275.000 kg

Heavy Duty H-FramePresses

Workshop Presses

Bench Presses

Roll Frame Presses

C-Clamp Presses

Arbor Presses

Press Accessories andSpeed Chart

Tension MeterLoad Cells

In order to fully complywith CE regulations, some presses must beequipped with specific

safety components, such as springcentered valves, two-hand controldevices or others.

Available in capacities from10 to 200 ton, each Enerpacpress consists of three basichigh quality components: apress frame, a power sourceand a cylinder.

Welded FrameAll presses feature a weldedsteel frame for optimumstrength. The larger modelsinclude features likeworkpiece side-loading andhydraulic height adjustmentof upper and lower bed.

Power SourceDepending on the productionrequirements, Enerpacpresses can be powered bymanual, air-hydraulic andelectric-drive power sources.

CylinderDepending on the applicationdouble-acting cylinders offerincreased efficiency. Checkout the Selection Charts forthe press best suited for yourneeds.

GaugeAll H-frame and Workshoppresses (except SOP-106models) feature an easy tomonitor pressure/force gaugefor increased safety.

128

®

Hydraulic Technology WorldwideB-Series, H-Frame Presses

• Quality welded H-frame for maximum strength andstability

• Manual, air or electric driven power sources• Available with single or double-acting cylinder• Side movement of cylinder (on 10 and 25 ton)• Unique “Hydrajust” bed positioning device on 50, 100 and

200 ton presses equipped with double-acting cylinders

H Press shown: BEP-5273

Great PossibilitiesGreat Performance

V-Blocks

These V-Blocks aredesigned for easy fixturingof round stock and othernon-uniform materials.

Featuring precise fit into the pressbolster.

Page: 138

“Hydrajust”Bed Positioning

Allows vertical adjustment ofupper and lower bed ondouble-acting 50, 100 and200 ton presses.

The “Hydrajust” bedpositioning is not designed

to withstand full cylinder capacity, onlyto be used for bed adjustment.

Page: 138

Swivel Pump Table

All H-Frame presses featurea pump table which can beswivelled to clear the rightside of the press, allowing

side-loading of work-pieces.

Page: 138

F An Enerpac H-framepress makes quick workof removing the shaftfrom this assembly.

129®

Heavy-Duty H-Frame Presses

BSeries

Capacity:

10-200 tonMaximum Daylight x Width:

1339 x 1220 mmMaximum Operating Pressure:

700 bar

* {…} = advance speed in mm per handpump stroke.

** See next pages for specific model numbers.

For increased safety,gauge included

All press models include agauge and gauge adaptor,matching the press capacity.

Page: 112

Best matching powersource

Depending the productionrequirements of your press,a wide range of power

sources are available to best match your application.

Page: 52

Man. Man.Elec. Air Elec.

{7,8}{11,2}12,0

123,0123,0{11,8}{37,9}53,053,02,8

26,026,0

{1,7}{1,7}1,51,71,7

{0,7}{1,4}0,70,72,82,82,8

Stroke(mm)

Speed(mm/sec)*

Power Source** Press ModelNumber

Maximum Bed

Daylight

(mm)

BMP-1117BMP-1120BAP-1116BAP-1120BAP-1230BMP-2126BMP-2130BAP-2120BAP-2230BEP-2190BEP-2270BEP-2176

510510510510510510510510510510510510

102510251025102510251025102510251025102510251025

Maximum Bed

Width

(mm)

10(101)

25(232)

PressCapacity

ton(kN)

•

•

••••

••

••

•••

••

155257155257254159260260260260260159

RapidAdvance

Pressing

= Single-Acting

Type Valve

Cylinder**

••••••••••••

H QUICK SELECTION CHARTFor more technical information see next page.

{2,3}{17,7}25,012,012,020,0{8,8}13,06,4

11,011,011,5

{0,3}{0,7}0,31,31,31,9

{0,3}0,20,71,01,01,3

••

BMP-5126BMP-5136BAP-5233BEP-5273BEP-5233BEP-5253BMP-10246BAP-10236BEP-10286BEP-10233BEP-10253BEH-20253

800800800800800800

100010001000100010001220

133513351335133513351335114511451145114511451339

50(498)

100(933)

200 (1995)

••••••••••

•••

••••

••

•

•

•

159159333333333333168168168333333333

•••••

••••

•

••

= Double-acting

••••

•••

•

•

130

®

Hydraulic Technology WorldwideB-Series, H-Frame Presses

130

A B C E F G J L

Press Model Number

BMP-1117BMP-1120BAP-1116BAP-1120BAP-1230BMP-2126BMP-2130BAP-2120BAP-2230BEP-2190BEP-2270BEP-2176BMP-5126BMP-5136BAP-5233BEP-5273BEP-5233BEP-5253BMP-10246BAP-10236BEP-10286BEP-10233BEP-10253BEH-20253

10(101)

25(232)

50(498)

100(933)

200 (1995)

PressCapacity

ton(kN)

H-Frame Press Dimensions (mm)

P-392P-80PAT-1102NPAM-1021PAM-1041P-80P-462PAM-1021PAM-1041PEM-2305WSPEM-2405WPEM-2205WP-80P-462PAM-1041PEM-2505WPEM-2420WPER-3420WP-464PAM-1041PEM-2408WPEM-3420WPER-3420WPER-3420W

Pump Model Number

RC-106RC-1010RC-106RC-1010RR-1010RC-256RC-2510RC-2510RD-2510RC-2510RD-2510RC-256RC-506RC-506RR-5013RR-5013RR-5013RR-5013RR-1006RR-1006RR-1006RR-10013RR-10013RR-20013

8

8

8

8

26

8

8

8

8

26

24

8

8

8

26

26

26

26

26

26

26

26

26

26

54

56

84

87

87

56

56

87

87

74

74

74

56

56

87

74

74

74

56

87

74

74

74

74


Page:Page:

CylinderModel Number

260260260260260260260260260260260260312312312312312312432432432432432553

140140140140140140140140140140140140252252252252252252332332332332332233

––––––––––––

292292292292292292392392392392392333

510510510510510510510510510510510510800800800800800800

100010001000100010001220

630630630630630630630630630630630630

100010001000100010001000124012401240124012401620

710710710710710710710710710710710710

118011801180118011801180144014401440144014401740

148315851483158516481513161516151749161517491513203520352199219921992199206520652065213821382370

104210421042104210421042104210421042104210421042117511751175117511751175110511051105110511051792

BA

770

A

E

Z

60122

FG

140

370*

O

170

1420J

N

L

432

BC

1000

A

E

U

V

F

Z

Y

G

380*

180

140

W

N

O

T

L

560

1985

J

50 140

150

10 and 25 ton models* 140 mm for presses with P-80 or P-392 handpump

50 and 100 ton models* 160 mm for BMP-5126

131®

Heavy-Duty H-Frame Presses

Weight

(kg)ZYWVUTON

Press Model Number

BMP-1117BMP-1120BAP-1116BAP-1120BAP-1230BMP-2126BMP-2130BAP-2120BAP-2230BEP-2190BEP-2270BEP-2176BMP-5126BMP-5136BAP-5233BEP-5273BEP-5233BEP-5253BMP-10246BAP-10236BEP-10286BEP-10233BEP-10253BEH-20253

H-Frame Press Dimensions (mm)

BSeries

Capacity:



700 bar

198198198198198198198198198198198198400400400400400400520520520520520453

107010701070107010701070107010701070107010701070420420420420420420280280280280280962

––––––––––––

100100100100100100170170170170170

–

––––––––––––

8080808080806060606060

200

––––––––––––

300300300300300300400400400400400400

––––––––––––

300300300300300300400400400400400410

––––––––––––

4242424242425252525252–

3232323232323232323232323232323232324040404040

76,5

135144137157163150168163170170187177448461485497520528974969986

103210401946

BC

1120

A

E

W

L

J2285

N

O

377

FG

380

253

254

UV

Z

(200 ton model)

‘Hydrajust’ Bed Positioning

Supplied standard with 50,100 and 200 ton presseswith double-acting cylinders.

H-Frame Press Gauges

All press models include agauge and gauge adaptor,matching the press capacity:

For more information on gauges, pleaserefer to the System Components section.

Page: 112

PressCapacity

ton

AdaptorModelNumber

Gauge ModelNumber

GF-10SGF-835GF-835GF-871GF-200S

GA-2GA-3GA-3GA-3GA-3

102550

100200

132

®


SOP-106P142SOP-106PAT1SOP-236P392SOP-236PAT1SOP-506P802SOP-506BPM1SOP-506BPE1SOP-513BPE1SOP-1006BPMSOP-1006BPESOP-1013BPE

10(101)

25(232)

50(498)

100(933)

P-142PAT-1102NP-392PAT-1102NP-802PEM-5405WSPER-5405WSPER-5405WSPEM-2408WPER-2408WPER-2420W

•

•

•

••••••

•

••

••

••••••

•

•

390390

122512251335133513351335114511451145

380380510510800800800800

100010001000

54

84

54

84

54

74

74

74

74

74

74

SOP-Series, Bench and Workshop Presses

No Workshop cando without one

H Shown from left to right: SOP-236P392, SOP-1006BPM, SOP-106P142.

Press Model Number

PressCapacity

ton(kN)

Power Source

Pump Type Valve Type

H SELECTION CHART

Maximum Bed

Daylight(mm)

Maximum Bed

Width(mm) Man. Elec. Air Man. Elec.

Pump Model Nr.

RC-106RC-106RC-256RC-256RC-506RR-506RR-506RR-5013RR-1006RR-1006RR-10013

CylinderModel Nr.

Page:

8

8

8

8

8

26

26

26

26

26

26

Page:

V-Blocks



Page: 138

Stroke

(mm)

••••••

155155159159159155155333168168333

Cylinder

•••••

‘Hydrajust’Bed Positioning

Allows vertical adjustment of upper and lower bed ondouble-acting 50 and 100ton presses.

The ‘Hydrajust’ bed positioningis not designed to withstand full

cylinder capacity, only to be used forbed adjustment.

Page: 138

• Quality welded frame for maximum strength and stability• Manual, air or electric driven power source• Single or double-acting GOLDEN RING DESIGN cylinders• Moveable pump table on presses with electric drive power

source allows easy loading of large workpieces• Side to side movement of cylinder on 10 and 25-ton

presses for easy fixturing• Height adjustment of lower bed with a winch (25-ton press)• Unique ‘Hydrajust’ bed positioning device on 50 and 100-

ton presses with double-acting cylinders provides quickadjustment of daylight

= Single-Acting = Double acting

133®

SOP-106P142SOP-106PAT1SOP-236P392SOP-236PAT1SOP-506P802SOP-506BPM1SOP-506BPE1SOP-513BPE1SOP-1006BPMSOP-1006BPESOP-1013BPE

Press Model Number

Bench and Workshop Presses

SOPSeries

Capacity:



700 bar

A

Dimensions (mm)

{2,5}12

{3,4}5,3

{5,5}4,34,34,3131313

{0,6}1,5

{0,7}0,7

{0,3}4,34,34,31,51,51,5

113113260260312312312312432432432

Speed (mm/sec)*

RapidAdvance

Pressing

B

8383

140140252252252252332332332

C

––––

292292292292392392392

E

380380510510800800800800100010001000

F

––

6306301000100010001000124012401240

G

4704707107101180118011801180144014401440

J

––

174017401968204720472199206520652138

L

420420124312431175117511751175110511051105

N

100100198198400400400400520520520

O

––

10701070420420420420280280280

T

––––

100100100100170170170

U

––––

80808080606060

V

––––

300300300300400400400

W

––––

300300300300400400400

Y Z

––––

42424242525252

3030323232323232404040

4952

165167510522539556

101510251073

Weight

(kg)

B 160A200

390ø11

EøZ L

N

G

628

33J

E

Z

60122

FG

140

432

140*

O

371

1622J

N

L

BA

770

A

BC

1000

A

E

U

V

F

Z

Y

G

380*

180

140

W

N

O

T

L

560

1985

J

50 140

150

10 ton Bench models

25 ton models* No pump table on SOP-236PAT1

50 and 100 ton models* 180 mm for SOP-506P802

* {…} = advance speed in mm per handpump stroke.

Press Gauges

All press models (except 10-ton) include a gauge andgauge adaptor, matching thepress capacity:


Page: 112

PressCapacity

ton

AdaptorModelNumber

Gauge ModelNumber

GF-20SGF-50SGF-871

GA-2GA-2GA-3

2550

100

134

®


• Quality welded frame for maximum strength and long life• Frame rolls easily on 4 steel roller bearings• Exclusive ‘Hydra-Lift’ bolster for effortless adjustment of

the vertical daylight• Roller head design is standard to allow lateral movement

and locking of the cylinder up to 300 mm left or right ofcentre

• All models in the quick selection chart have been matchedto an electric pump, double-acting cylinder, hose andgauge, offering the complete package

• Roll Frame design features a stationary bed with the abilityto support heavy loads

H Shown: BPR-5075

BPR-Series, Roll Frame Presses

Double-Acting Cylinder Press ModelNumber

94210481295

152159279

BedDaylight

A(mm)

BPR-5075BPR-10075BPR-20075

7308891219

Maximum Bed

WidthE

(mm)

50 (498)100 (933)200 (1995)

PressCapacity

ton (kN)

RR-5013RR-10013RR-20013

PER-3420WPER-3420WPER-3420W

ModelNumber

ModelNumber

Stroke

(mm)

RapidAdvance

Pressing

Speed

(mm/sec)

Electric Pump

333333330

74

74

74

Expert DesignedVersatility

26

26

26

Page Page

22125,4

2,31,30,6

V-Blocks



Page: 138

Cylinder adjustment

Cylinder adjustment allowshorizontal side to sidecylinder positioning.

Hydra-Lift

Allows easy, effortlessdaylight adjustment.Standard on all Roll-framepresses.

Page: 138

min. max.

135®

Roll Frame Presses

AB

CM

K

N

GJ H

L

E

F

D

H An BPR-20075 Roll Frame Press is used to remove a large shaft from this pillow-block assembly. The Roll Frame design allows this heavy part to be safely loaded with an over-head crane.

Weight

(kg)A

(min.-max.) B

Roll Frame Press Dimensions (mm)

BPRSeries

Capacity:



700 bar

Roll Frame Press Gauges

All press models include agauge and gauge adaptor,matching the press capacity:


Page: 112

PressCapacity

ton

AdaptorModelNumber

Gauge ModelNumber

GF-50SGF-871GF-200S

GA-2GA-3GA-3

50100200

152-942159-1048279-1295

387438610

C D E F G H J K L M N

971965933

264222254

730889

1219

93311431626

127146232

142016052150

162616762197

203203203

270270381

762813915

287030213200

91717674186

Press ModelNumber

BPR-5075BPR-10075BPR-20075

136

®


136

A-Series, C-Clamp and Arbor Presses

C-Clamp Press• 5, 10 and 20 ton capacity • Operational in all positions

Arbor Press• 10 and 30 ton capacity• Foot mounting holes for horizontal or vertical positioning• Machined working surfaces for easier fixturing• Slotted back to simplify loading and unloading of

longer parts

H Shown from left to right: A-220, A-330 and A-310

C-Clamp

Arbor


Press Type

Press ModelNumber

165228305227260

Maximum Bed

Daylight

(mm)

A-205A-210A-220A-310A-330

Maximum Bed

Width

(mm)

5 (45)10 (101)20 (178)10 (101)30 (295)

PressCapacity

ton (kN)

5 ton RC-cylinder*10 ton RC-cylinder*25 ton RC-cylinder**10 ton RC-cylinder*RC-308*

8

8

8

8

8

Push Pin A-183

For applications requiringprecision pressing, such asshaft removal and insertion.This attachment fits 10 ton

cylinders and requires the use of athreaded adaptor saddle (A-13).

Smooth Saddle A-185

For pressing applications ofdelicate parts, such asaluminium castings, thissaddle decreases surface

marks during the pressing application.Requires 10 ton cylinder and threadedadaptor saddle (A-13).

The StandardWorkshop Tools

* Recommended cylinder must be ordered separately.

** Must be limited to 20 ton.

515770

135178

Page:

10 ton BenchPresses

For 10 tonBench Pressselection see:

Page: 132

137®

C-Clamp and Arbor Presses

H

M

E

N

O

8,6(8x)

A

F

291 (A-310)375 (A-330)

D

LJ

K

C

B

12,7G

1/2"-18UN

59

Press ModelNumber

Weight

(kg)

A-205A-210A-220A-310A-330

A

Press Dimensions (mm)

B C D E F G H J K L M N O

Arbor Press A-310, A-330

For high-cycle productionapplications, the C-Clampand Arbor presses shouldbe limited to 50% of theircapacity.

ASeries

Capacity:



700 bar

H A perfect example of the force and versatility of the Enerpac A-220 C-Clamp press.

291406540414557

203283346281353

165228305227260

95152152152152

7383108135178

2626266363

517695122140

6664701925

25414497

165

–––

175203

–––

6567

–––

5498

–––

219276

717382786

11/2-16 UN

21/4-14 UN

35/16-12 UN

21/4-14 UN

35/16-12 UN

Top View Working Surface

J

FB

D

C

G

A

K

E

H

C-Clamp Press A-205, A-210, A-220

138

®

Hydraulic Technology Worldwide®

Hydraulic Technology WorldwidePress Accessories, Press Speed Chart

138

10(101)

25(232)

30(295)

50(498)

100(933)

200(1995)

PressCapacity

ton(kN)

Cylinderload

P-142 P-392 P-80 P-802P-462P-464 PEM-2305WS

PEM-5405WSPER-5405WS

PEM-2205WPEM-2405WPEM-2408WPEM-2420WPER-2408W *

PEM-3420WPER-3420W PAT-1102N

PAM-1021PAM-1041

Hand Pumps Electric Pumps Air Pumps

mm of plunger travel per handpump stroke

Two-Speed Single-Speed Two-Speed Two-Speed

At 6,9 bar air pressure

No loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoad

12––––––––––

7,81,73,40,72,60,6––––––

11,21,74,90,73,70,62,30,3––––

––––

9,00,65,50,3––––

––

37,91,4

29,01,1

17,70,78,80,3––

––

2,82,82,22,2––––––

––––––

3,63,6––––

––

26,02,8

20,02,2––

6,40,7––

––––––

20,01,9

11,01,05,40,6

121,55,30,74,30,5––––––

1231,7530,7420,6250,3130,2––

Note: Values are approximate. Cylinder speed may vary in actual application.* The 100 ton Workshop Press SOP-1013BPE includes pump model number PER-2420W.

H PRESS SPEED CHART

V-Blocks

Hydra-Lift

‘Hydrajust’BedPositioning

Two-ButtonControl

10 ton Bench10-23 ton H-frame23 ton Workshop50 ton H-frame and Workshop100 ton H-frame and Workshop200 ton H-frame200 ton Roll frame

50-100 ton Roll frame200 ton Roll frame

50 ton H-frame and Workshop100 ton H-frame and Workshop200 ton H-frame

All press models with electricoperated valves

A-110BSA-1021BSA-1021BSA-501BSA-1001A-200A-200R

IPL-R100IPL-R200

BSS-2315BSS-2310BSS-5380

–

• Facilitate positioning ofpipes and bars, or placedupside-down, to serve as aconvenient worktable

• A-110 includes one V-block• All other model numbers

include 2 V-blocks

• Allows easy, effortlessdaylight adjustments

• Includes accessory chain

• Allowing effortless daylightadjustment by moving theupper- and lower bed ondouble-acting presses

• Bolted to the cylinderplunger, both beds can bemoved up and down

• Two hand operation of thepress for maximum operatorsafety

• Call Enerpac for detailedinformation

Description Press FrameCapacity

ModelNumber

Features

mm of plunger travel per second

139®

Tension Meter and Load CellsH Shown: LH-102 and TM-5 (in middle)

DA

BC

G (2x) EF

G F

A

D

1/2"-13UNC

CB

E

5/8"-11UNC

TM, LH Series

Capacity:

900 - 275.000 kgAccuracy, % of full scale:

±2%

Direct MountedDirect Mounted LoadCell

Remote Mounted with0,6 m Hose

Remote Mounted with1,8 m Hose

4500900450090045009000

21.00045.00090.000275.000

500100500100500100020005000

10.00025.000

1002010020100200500100010002500

1217878787878

102133158170

248444444444470

102127152

236575757575786

127159310

51606060606060606060

94102102148148148148148148148

22216216846846846

2094213521672318

191/4"-20, 44,5 BC

1/4"-20, 44,5 BC

1/4"-20, 44,5 BC

1/4"-20, 44,5 BC

1/4"-20, 44,5 BC

3/8"-24, 63,5 BC

3/8"-24, 89,0 BC

3/8"-24, 101,6 BC

1/2"-13, 283,0 BC

TM-5LH-10LH-50LH-102LH-502LH-1002LH-2506LH-5006LH-10006LH-30006

ModelNumber

GaugeCapacity

(kg)

Type MinimumReading

(kg)

Gauge In-crements

(kg) A B C D E F G

Dimensions (mm)

Tension Meter TM-5• Accuracy ±2% of full scale• Zinc and bronze plated to resist corrosion• Dual-range readout in kilograms and pounds• Cushioned metal case provides safe storage and

transport

Load Cells LH Series• Accuracy ±2% of full scale• Swivel loading pad reduces eccentric loading for

improved accuracy• Maximum indicating pointer reading pre-selected forces

or to maintain maximum force readings• Dual-range readout in kilograms and pounds LH-Series

TM-5

140

®


BA

AB

FAD

B

H

G

C

Hydraulic and Mechanical Pullers

ENERPAC offers a complete line of pullers with

the widest range of sizes, capacities and styles.

Whether your application requires mechanical,

hydraulic or the patented Posi Lock® system,

Enerpac can satisfy your requirements.

Made of high strength steel alloys, you can

depend on Enerpac pullers to provide years of

trouble-free operation, even in the harshest

environments.

Mechanical

An economical design for installing andremoving all press fitted or heat fittedparts such as gears, pulleys, wheels,bearings, sleeves, sprockets, pins orother stubborn parts.

Hydraulic Pullers

These hydraulic pullers eliminate time-consuming and unsafe hammering,heating or prying. Damage to parts isminimized through the use of controlledhydraulic power.

Posi Lock® Pullers

The puller that meets the safetychallenge. A control cage holds thepulling jaws securely in workingposition. This patented feature reducesthe possibility of the puller jaws slipping

off the work surface thereby increasing productivity, toollife and reducing dangerous situations for the user. ThePosi Lock® feature is available in a mechanical orhydraulic version.

Always wearSafety Goggleswhile usingpullers.

141®

BA

142 E

144 E148 E

150 E154 E

142 E146 E

144 E

142 E

147 E

143 E147 E

144 E148 E

154 E

Puller Section Overview

MechanicalCapacity 1- 30 tonMaximum Reach 55 - 585 mmMaximum Spread 50 - 580 mm

HydraulicCapacity 8 - 50 tonMaximum Reach 252 - 700 mmMaximum Spread 250 - 1100 mm

Posi Lock®

Capacity 2 - 100 tonMaximum Reach 100 - 1219 mmMaximum Spread 76 - 1778 mm

MechanicalCapacity 10 - 30 tonMaximum Reach 205 - 485 mmMaximum Spread 170 - 450 mm


MechanicalCapacity 2 - 50 tonMaximum Reach 59 - 260 mmMaximum Spread 5 - 252 mm

MechanicalCapacity -Maximum Reach 110 - 145 mmaximum Spread 91- 190 mm


Hydraulic Capacity 8 - 50 ton

Posi Lock®

Capacity 10 - 100 ton

Grip Pullers

Cross-BearingPuller

Bearing Puller

Puller Sets

Bearing Cup

Type and Functions Capacities Page

When selecting a puller it isimportant to consider 3 basic specifications:

Capacity:

the amount of force the puller iscapable of producing.Typically, the capacity requiredfor a job can be determined byusing the shaft diameter of thepart being pulled.For manual pullers, the centerbolt diameter of the puller shouldbe at least half the diameter ofthe shaft being pulled from.For hydraulic pullers, thecapacity in tons should be 0,28to 0,4 times the shaft diameter inmm. Use the following chart:

Shaft PullerDiameter Capacity

0 - 25 mm 10 ton25 - 50 mm 20 ton50 - 89 mm 30 ton89 - 140 mm 50 ton

Reach:

the distance between thebottom of the base and the jawflats. The puller’s reach mustequal or exceed the samedistance of the part being pulled.

Spread:

the distance between the jaws.The puller’s spread needs to begreater than the width of the partbeing pulled.

142

®

Hydraulic Technology WorldwideMP-Series, Mechanical Pullers

Cross Bearing Puller

Cross Bearing Pullers can be used inalmost any pulling orpressing application.Depending on theapplication, bearing cupand bearing pullerattachments can be usedwith the cross bearingpuller.

A

B

• Full line of Mechanical Pullers• Two, two/three and three Jaw Grip Puller designs• Puller jaws are made of forged steel and heat treated for

maximum durability and strength

B

A

B

A

B

A

B

A

2-Jaw

3-Jaw

Reversible Grip Pullers

For flexibility, reversible grip pullersincorporate two tools in one puller. Thisgrip puller uses a reversible jaw thatcombines a standard grip and a slottedgrip. Reversible grip pullers can be usedas standard grip pullers or bolt grippullers.

Lightweight &Flexible

2-Jaw

3-Jaw

Grip/Long Grip Pullers

Grip pullers are used when removing abearing, gear or pulley from a shaft. GripPullers are available in two, two/threeand three arms designs. All puller jawshave additional mounting holes to adjustto shorter long reach applications. Longarm grip pullers are also available.

H The toughest job can be done with ease. An Enerpac mechanicalpuller does not need much physical effort.

H Shown: MPR-23, MP-13, MPL-102, MPR-23, MPR-43

143®

ModelNumber

Grip Pullers

Mechanical Pullers

Bearing Puller Attachments

Bearing puller attachments can be usedwith grip, bearing andbearing cup pullers tosolve many difficultpulling applicationswhere pulling surfacesare limited.

MP-12MP-13MP-102MP-103MP-172MP-173MP-302MP-303

MPL-42MPL-43MPL-72MPL-73MPL-102MPL-103MPL-172MPL-173MPL-302MPL-303

MPR-22MPR-23MPR-42MPR-43MPR-72MPR-73

MPP-10MPP-17MPP-30

MPA-6*MPA-7*MPA-8*

MPA-6AMPA-7AMPA-8A

MPA-1MPA-2MPA-3MPA-4

A

B

Bearing Cup Pullers

Bearing cup pullers are used to removebearing cups, oil seals, bushing and sleevesfrom blind holes. Bearing cup pullers areused with corresponding cross bearingpullers when there is no point of support.When there is a point of support, a centralscrew bearing cup puller may be used byitself.

232

2/32323

22/32

2/32

2/32323

22/32

2/32

2/3

222

222

222

––––

0,20,37,57,5

11,516,525,533,5

1,42,12,53,56,08,5

13,018,523,539,0

0,30,61,01,52,13,0

3,49,5

35,0

2,42,66,0

2,42,66,0

0,72,75,7

12,5

MPSeries

Capacity:

1- 30 tonReach:

55- 585 mmSpread:

50 - 580 mm

1 (8,9)

13 (115)

17,5 (155)

30 (267)

5 (44)

7 (62)

13 (115)

17,5 (155)

30 (267)

2 (17)

5 (44)

7 (62)

10 (89)

17,5 (155)

30 (267)

–––

–––

2 (17)10 (89)

17,5 (155)

30 (267)

7070310310425425520520

175175240240360360480480580580

8080150150200200

50-17086-266116-450

25-9125-9150-190

25-9125-9150-190

5-5010-10910-12915-203

5555

300300365365460460

185185225225385385480480585585

65658585

125125

205255485

110140145

110140145

59110150180

Min.-Max.SpreadB (mm)

Max. ReachA (mm)

Number of

Jaws

Weight

(kg)

Capacity

ton (kN)

* Combinations to make: MPA-6 with MPP-10 or MPP-17, MPA-7 with MPP-10 or MPP-17, MPA-8 with MPP-17 or MPP-30

Long Grip Pullers

A

B

A

B

MPA-6, 7, 8 MPA-A

Bearing Puller Attachments

Bearing Cup Puller (Central Screw)

Bearing Cup Puller Attachment

Reversible Grip Pullers

Cross Bearing Pullers

144

®


54-57 E20 E

21-22 E107 E112 E118 E

145 E146 E147 E147 E

BHP-Serie, Master Puller Sets

8 tonMaster Puller Set Capacity 20 ton 30 ton 50 ton Page:

BHP-1752 BHP-2751G BHP-3751G BHP-5751G

Included Hydraulics Set Weight E

• Hand Pump • Cylinder • Saddle• Hose• Gauge • Gauge Adaptor

Included PullersGrip PullerCross Bearing PullerBearing Cup PullerBearing Puller

• Wooden Case

Model Number E

10203040

37 kgP-142

RWH-121*–

HB-7206GF-120GA-4

BHP-1762BHP-1772BHP-180BHP-181CW-166

90 kgP-392

RCH-202HP-2015HC-7206GF-813S

GA-3

BHP-252BHP-262BHP-280BHP-282CW-166

172 kgP-392

RCH-302HP-3015HC-7206GF-813S

GA-3


298 kgP-80

RCH-603HP-5016HC-7206GF-813S

GA-3


Multi PurposePuller Set

H Shown: Master Puller Set BHP-3751G

• Supplied with a full hydraulic set including pump, hose,cylinder, gauge, gauge adaptor and wooden case

• All Master Puller Sets include a Grip Puller, a CrossBearing Puller, a Bearing Cup Puller and a Bearing PullerAttachment

• High quality, forged steel components provide superiorreliability and service

Maintenance engineers throughout the industry

greatly appreciate theEnerpac Master Puller sets E

H SELECTION CHART

Speed Crank and Adjusting Screw

Sets include speed crankand adjusting screw for fastcontact to work beforehydraulics are applied.

Separate Ordering of Single Purpose Pullers

All single purpose pullers canbe ordered separately. Seenext pages for details.

* Specifications of RWH-121 cylinder are the same as for RCH-121.

145®

Model Number E



Grip Puller Model Number E

Maximum Spread** 2-jaw3-jaw

Maximum Reach** 2-jaw3-jaw

Jaw** ThicknessWidth

Adjusting Screw** DiameterLength

Grip Puller Sets

20 ton8 ton 30 ton 50 ton

BHPSeries

Capacity:

8, 20, 30 and 50 ton

Spread:

250-1100 mm

Reach:

252 -700 mm


700 bar

10

BHP-251G56 kgP-392

RCH-202HP-2015HC-7206GF-813S

GA-3BHP-252*

4004993003002027

1"- 8 UNC

508

BHP-15222 kgP-142

RWH-121–

HB-7206GF-120GA-4

BHP-1762*2492492522521523

3/4"- 16 UNF

400

BHP-351G91 kgP-392

RCH-302HP-3015HC-7206GF-813S

GA-3BHP-352*

5938003873872438

11/4"- 7 UNC

609

Grip Puller Set Capacity

BHP-551G160 kgP-80

RCH-603HP-5016HC-7206GF-813S

GA-3BHP-552*

89910997007003039

15/8"- 5.5 UNC

762

* Grip Puller order number without hydraulics.** Dimensions in mm.

H SELECTION CHART

Model Number BHP-251G:

includes Grip Puller BHP-252 and a full hydraulic set. (Hand pump, cylinder, saddle,hose, gauge and gauge adaptor.)

Model Number BHP-252:

includes Grip Puller mechanicalparts only, for use with yourexisting hydraulics.

• Precise hydraulic control allows fast, efficient and safepulling

• High quality, forged steel components provide superiorreliability and service

• Available with and without full hydraulic set

H Shown: Grip Puller Set BHP-351G

Ordering Example

146

®


Model Number E



Cross Bearing Puller Model Number E

Spread** MaximumMinimum

Reach** MaximumAdjusting Screw** Diameter

LengthLeg** Length

LengthLengthLength

Upper Leg Ends** ThreadLower Leg Ends** ThreadBearing Cup Puller Model Number E

Bearing Puller Model Number E

Cross Bearing Puller Sets


20

3040

BHP-261G62 kgP-392

RCH-202HP-2015HC-7206GF-813S

GA-3BHP-262*

351139571

1"- 8 UNC

508239419571114

3/4"- 16, 255/8"- 18, 25BHP-280BHP-282

BHP-16226 kgP-142

RWH-121–

HB-7206GF-120GA-4

BHP-1772*266106462

3/4"- 16 UNF

400210462

––

3/4"- 16, 255/8"- 18, 25BHP-180BHP-181

BHP-361G121 kgP-392

RCH-302HP-3015HC-7206GF-813S

GA-3BHP-362*

454179711

11/4"- 7 UNC

609203457711

–1-14, 351-14, 27BHP-380BHP-382

BHP-561G185 kgP-80

RCH-603HP-5016HC-7206GF-813S

GA-3BHP-562*

570220863

15/8"- 5.5 UNC

762609863

––

11/4"- 12, 3811/4"- 12, 38

BHP-580BHP-582

Attachments

Both the Bearing Cup Pullerand the Bearing Puller maybe ordered separately. (Seenext page.) • Precise hydraulic control allows fast, efficient and safe

pulling• High quality, forged steel components provide superior

reliability and service

* Cross Bearing Puller order number without hydraulics. ** Dimensions in mm.

H Shown: Cross Bearing Puller Set BHP-361G

Cross Bearing Puller Set Capacity

H SELECTION CHART

BHPSeries

Capacity:

8, 20, 30 and 50 ton

Spread:

266 - 570 mm

Reach:

462 - 863 mm


700 bar

®

BHP-28022025140

1"- 8 UNC

147

Bearing Cup and Bearing Pullers

Bearing Puller

Bearing Puller has wedgeshaped edges for placingpuller behind hard to reachbearings, gears, etc., where

clearance prevents direct application ofgrip puller arms.The Bearing Puller can be used with theCross Bearing Puller or the Grip Puller.


30BHP-180

11026110

3/4"- 16 UNF

BHP-38035950145

11/4"- 7 UNC

BHP-58035950

14515/8"- 5.5

Spread** Max.Min.

Width** Thread

20 ton8 tonCapacity 30 ton 50 ton

40BHP-282

1309

1505/8"- 18 UNF

BHP-18111435110

5/8"-18 UNF

BHP-38224515260

1"- 14 UNS

BHP-58224515

26011/4"-12 UNF

Model Number

** Dimensions are in mm.

H Shown: BHP-380

H Shown: BHP-382

Bearing Cup Puller

• Made of high strength steelalloy

• Easily adapted to CrossBearing Pullers for fast andefficient removal of the mostdifficult parts

• Adjustable to fit a variety ofbearings and seals

Bearing Puller

• Made of high strength steelalloy

• Wedge-shaped edges allowremoval of the most hard-to-grip components

• Easily adapted to CrossBearing Pullers for fast andefficient removal of the mostdifficult parts

Bearing Puller

Capacity

H SELECTION CHART

H SELECTION CHART

Bearing Cup PullerModel Number

Spread** Max.Min.

Reach** Max.Center Screw Thread

BHPSeries

Capacity:

8, 20, 30 and 50 ton

Maximum Spread:

110 - 359 mm

Reach:

110 -145 mm


700 bar

148

®

Hydraulic Technology WorldwideBMZ-Series, Master Puller Sets

• Precise hydraulic control allows fast, efficient and safepulling

• High quality, drop-forged steel grip arms provide superiorreliability and service

• Heat treated malleable iron crosshead• Sets include light weight two-speed hand pump,

RC-Series cylinder, saddle and 4:1 safety hose

H Shown from left to right: BMZ-325, BMZ-324

Chain Attachments

Workpieces larger than thestandard grip arms allow,can easily be handled usingoptional chain attachments.

Page: 161

Gauges



Page: 105

Storage Cases

Sturdy steel storage casesprotect your equipment fromdust, water, grease and dirt.

Page: 178

Time-saving andEasy in Use

H BMZ-324 with short grip arms used to remove a chain wheel.

® 149

Master Puller Sets

BMZSeries

Capacity:

10 and 25 ton

Maximum Spread:

360-508 mm

Maximum Reach:

310 mm


700 bar

BMZ-302BMZ-324BMZ-303BMZ-325

11232746

–A-12

–A-29

–HC-7206

–HC-7206

0 - 1

45

ø 168ø 205

30

1333

22 3050 - 140

185

205

ø 168ø 205

28

2295

83

75 - 360

322

205

30

333

- 207

13

ø 204ø 306ø 350

445

225

67

30105

40

75 - 508

170

114

- 310

45

13

BMZ-324

With short grip arms

BMZ-324

With long grip arms

BMZ-325

CAUTION!

When used in combinationwith chains or attachments,the maximum system

pressure must be limited to half therated pressure (350 bar).

max.50%

–RC-106

–RC-256

–P-392

–P-392

0 - 2070 - 207

114 - 310114 - 310

50 - 36050 - 36075 - 50875 - 508

10

25

Capacity

ton

Set Weight

(kg)

Set ModelNumber

Reach

(mm)min. - max.

Spread

(mm)min. - max.

Hand Pump Cylinder Saddle Hose

EP-Serie, Posi Lock® Mechanical Pullers

150

®


H Shown from left to right: EP-206, EP-108

• Patented ‘Safety Cage’ jaw retention system• Roll threaded shafts for less effort when applying high

torque• Slim tapered jaws for improved gripping in tight spots• Available in 2 and 3 jaw design and inside and outside

pulling configuration• More efficient pulling, as one man can do the job where

manual pullers often require two operators

F Positioning an EP-104 3-jaw puller onthe accessory drive of adiesel engine.

For Safer and Faster Pulling

Long Jaws

Long Jaws are used toincrease the reach andspread of pullers. Theymaintain the same pulling

capacity as the standard jaws, butreduce clamping force to 25% of rating.

Page: 153

Shaft Attachments

Shaft protectors andextenders are live centersthat fit over the standardpuller shaft for tip protectionand additional reach.

Page: 153

Application Tip

In determining the correctmanual puller capacity foryour application, use thefolllowing rule:

The center bolt diameter of the pullershould be at least 1/2 the diameter of theshaft being pulled on.

Example:

A part being pulled from a shaft with adiameter of 38 mm would require a pullerwith a center bolt diameter of at least 19 mm.

3

Numberof

Jaws

232323232323

Posi Lock® Mechanical Grip Pullers

151®

1 Patented ‘Safety Cage’ guidesjaws, holding them securely ontothe part.

2 Durable forged jaws providepositive grip.

3 Jaw head provides pivot andreaction point for jaws.

4 Pin, for easy jaw removal andreplacement.

5 T-handle provides control of thepuller jaws.

6 Drive bolt with rolled threads forincreased force with reduced inputtorque.

7 Snap-ring retains cage to drive boltand provides quick removal foreasy service.

EPEPPSeries

Capacity:

2 - 40 ton

Spread Range:

12- 635 mm

Maximum Reach:

101- 355 mm

2 (17)

5 (45)

6 (53)

10 (89)

12 (106)

17 (151)

14 (124)

20 (178)

25 (222)

30 (267)

35 (311)

40 (356)

SpreadRange

(mm)min. - max.

MaximumReach

(mm)

Capacity

ton (kN)

Center BoltDiameter

(mm)

Numberof

Jaws

ModelNumber

EP-204EP-104EP-206EP-106EP-208EP-108EP-210EP-110EP-213EP-113EP-216EP-116

EPPMI-6

101101152152203203245245304304355355

12 - 12712 - 12712 - 12712 - 12719 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576 - 635

Weight

(kg)

SpreadRange

(mm)

MaximumReach

(mm)

JawStyle

Jaw Length

(mm)

ModelNumber

Weight

(kg)

141416162020202029293131

1,41,83,23,65,46,45,97,3

17,220,025,830,8

168218

14 - 10125 - 133

StandardLong

StandardLong

168218

3,93,9

H QUICK SELECTION CHART INTERNAL PULLERS

H QUICK SELECTION CHART EXTERNAL PULLERSFor quick technical information see next page.

H EP-204 2 jaw puller positioned to pull a water pump.

EP-Serie, Posi Lock® Mechanical Pullers

152

®


H

A

C

B

F

G

E

J

B

C

AF

E

G

H

3

Numberof

Jaws

232323232323

2 (17)

5 (45)

6 (53)

10 (89)

12 (106)

17 (151)

14 (124)

20 (178)

25 (222)

30 (267)

35 (311)

40 (356)

SpreadRange

(mm)

MaximumReach

(mm)

Capacity

ton (kN)

Center Bolt

Diameter

(mm)

MaximumTorque

(Nm)

MaximumTorque

(Nm)

Numberof

Jaws

ModelNumber


EPPMI-6

101101152152203203245245304304355355

12 - 12712 - 12712 - 12712 - 12719 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576 - 635

SpreadRange

(mm)

MaximumReach

(mm)

JawStyle

Jaw Length

(mm)

ModelNumber

141416162020202029293131

2754

102176203298237373644814

10851153

168218

14 - 10125 - 133

StandardLong

StandardLong

168218

––

H QUICK SELECTION CHART INTERNAL PULLERS

H QUICK SELECTION CHART EXTERNAL PULLERS

JawTipDetail

SlideHammer

2 and 3 Jaw External PullerEP-Series

Internal PullerEPPMI-6


EPP-4EPP-4EPP-6EPP-6EPP-10EPP-10EPP-10EPP-10EPP-1316EPP-1316EPP-1316EPP-1316

EPX-4EPX-4EPX-6EPX-6EPX-10EPX-10EPX-10EPX-10EPX-1316EPX-1316––

––––EP-11054EP-11054EP-11054LEP-11054LEP-11354LEP-11354LEP-11654LEP-11654L

Posi Lock® Mechanical Grip Pullers

153®

Spread

A

Overall Length

B

Reach

C

Jaw Width

F

CenterBolt

Diam.

E

TipClearance

G

Tip Depth

H

HexSocket

Size(inch)

J

12 - 12712 - 12712 - 12712 - 12719 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576- 635

141416162020202029293131

151519192222252531313636

4,14,18,18,16,46,46,46,412,712,713,513,5

4,64,66,16,19,19,19,19,19,79,7

11,711,7

7/8"7/8"

11/16"11/16"11/8"11/8"11/8"11/8"

111/16"111/16"113/16"113/16"

245 - 323245 - 323323 - 476323 - 476412 - 615412 - 615489 - 736489 - 736660 - 965660 - 965

800 - 1155800 - 1155

100100152152203203245245304304355355

Note: Overall length (B) is dependent on position of center bolt.

Order: ModelNumber

SpreadRange(mm)

Reach

(mm)

EP-11054EP-11054LEP-11354LEP-11654LEP-10554L*

57 - 38138 - 55838 - 76250 - 96525 - 133

245400508635218

Order: ModelNumber

Dia-meter

(mm)

Length

(mm)

IncreasesCenter Bolt

Length(mm)

EPP-4EPX-4EPP-6EPX-6EPP-10EPX-10EPP-1316

25503150315050

19192222252535

9381238123821

ModelNumber

ShaftProtectors

ShaftExtenders

Long Jaws

SpreadRange

A

Overall Length

B

Reach

C

Jaw Width

F

Slide Rod Dia.

E

TipClearance

G

Tip Depth

H

ModelNumber

Optional accessories

EPEPPEPXSeries

Capacity:

2- 40 ton

Spread Range:

12- 635 mm

Maximum Reach:

101- 355 mm

14 - 10125 - 133

736787

168218

14,214,2

88

3,07,6

1,54,6

EPPMI-6

Dimensions (mm)

Dimensions (mm)

* EPPMI-6 only

Long JawsLong Jaws are used to increasethe reach and spread of pullers.They maintain the same pullingcapacity as the standard jaws,but reduce clamping force to 25% of rating.

Shaft Attachments

Shaft protectorsand extenders arelive centers that fitover the standardpuller shaft for tipprotection andadditional reach.

154

®

Hydraulic Technology WorldwideEPH-Serie, Posi Lock® Hydraulic Pullers

304304381381457457635635

17781778

MaximumSpread

(mm)

Capa-city

ton (kN)

Numberof

Jaws

ModelNumber

EPH-208EPH-108EPH-210EPH-110EPH-213EPH-113EPH-216EPH-116EPH-1002EPH-1003

2323232323

H Shown: EPHR-110

All Models:• Patented ‘Safety Cage’ jaw retention system• High force hydraulic system for effortless pulling of large

components• Slim tapered jaws for better gripping in tight spots• Available in 2 and 3 jaw design• More efficient pulling, as one man can do the job where

manual pullers often require two operators

100 Ton Models:• 700 bar electric pump with remote jog feature• Roller cart with power lift• Multiple pushing adaptors

100 ton Puller

The 100 ton puller is sold asan entire system. Itselectrically powered lift cartenables the puller to be

raised up to 1,5 meter above the ground.Lifting brackets allow the puller to beremoved from the cart and lifted intowork places above 1,5 meter. When notin use, the lift cart may be used as ameans to manually transport the puller.Hydraulic power is provided by a 700 bar electric pump. A remote jog switch is included forfingertip control of the removal process.

10 (101)

15 (142)

25 (232)

50 (498)

100 (933)

F The EPH-1002 quicklyand easily removes thisdrive sheeve from itsshaft.

High-Tech Pulling

Transport and Store

Conveniently stores andtransports hydraulic pullersand accessories. Order the EPT-2550 Storage

Cart and make your job easier to do!

®

Dimensions (mm)

155

Posi Lock® Hydraulic Grip Pullers

SpreadRange

A

Overall Length

B

MaximumReach

C

Jaw Length

D

Jaw Width

F

Tip Clearance

G

Tip Depth

H

Weight

(kg)Ram Point

SetsLong Jaws Lift Plates

FA

D

B

H G

C

Pump Sets

All Posi Lock HydraulicPuller Sets that include 230 VAC pumps, will featurethe following components:

Components for 115 VAC pumps areavailable on request.

EPHSeries

Capacity:

10-100 ton

Spread Range:

304-1778 mm

Maximum Reach:

203-1219 mm


700 bar

19 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576 - 635

190 - 1778190 - 1778

498498665665846846919919

19551955

20320324524530430435535512191219

23723727027034834841341312191219

22222525313136367676

7,47,411,211,212,912,915,015,088,988,9

6,96,99,19,19,79,7

11,711,788,988,9

6,47,3

10,011,321,325,040,845,4771907

EPH-155EPH-155EPH-155EPH-155EPH-257EPH-257EPH-508EPH-508

––

EPH-11054EPH-11054

EPH-11054LEPH-11054LEPH-11354LEPH-11354LEPH-11654LEPH-11654L

––

EPH-11052EPH-11052EPH-11052EPH-11052EPH-11352EPH-11352EPH-11652EPH-11652

––

2Jaw

Puller

3Jaw

Puller

EPHR208EPHS208EEPHR210EPHS210EEPHR213EPHS213EEPHR216EPHS216EEPHR108EPHS108EEPHR110EPHS110EEPHR113EPHS113EEPHR116EPHS116E

EPH-208EPH-208EPH-210EPH-210EPH-213EPH-213EPH-216EPH-216EPH-108EPH-108EPH-110EPH-110EPH-113EPH-113EPH-116EPH-116

RC-106RC-106RC-1510RC-1510RC-2514RC-2514RC-5013RC-5013RC-106RC-106RC-1510RC-1510RC-2514RC-2514RC-5013RC-5013

152152254254362362336336152152254254362362336336

–EP-1E

–EP-1E

–EP-1E

–EP-2E

–EP-1E

–EP-1E

–EP-1E

–EP-2E

10272238445387

12311282339485791

127

10101515252550501010151525255050

H SETS SELECTION CHART

Optional Accessories

Weight

(kg)

Style SetModelNumber*

Capa-city(ton)

Basic Puller Cylinder Stroke

(mm)

PumpSet

Order: Model Number

SpreadRange(mm)

Reach

(mm)

EPH-11054LEPH-11354LEPH-11654L–

38 to 55838 to 76250 to 965

–

401508660

–

Specifications: Long Jaws

PumpHoseGaugeAdaptor

PUJ-1200EHC-7210G-2535L

–

PEM-3208EHC-7210G-2535LGA-3

EP-1EPump Set

EP-2EPump Set

* Standard set shipped with 230 VAC pump.

Enerpac Hydraulic Tools ®


K

K

H

D

BC

K

K J

F

A

BC

C

D

J

GA

B

C

F

E

ENERPAC Hydraulic Tools are designed to

survive your toughest applications. Backed by

the World Standard Guarantee, you can

depend on your Enerpac tool to get the job

done, again and again.

Whatever your requirement, you will find an

Enerpac tool to solve your problem, increasing

productivity and safety. For cutting, punching,

bending, pressing, spreading and pulling,

make Enerpac your tool selection.

Hydraulic System Set-up

Check out our ‘Yellow Pages’section for help on system set-ups and valving configurations.

Page: 93

Pump and Tool Sets

Most hydraulic toolsin this section areavailable in sets,

for a perfect tool-pump match.

Page: 158

WalkPac

156

Tool and Pump Sets

Maintenance Sets

Punches

Spread Cylinders

Machine Lifts

Load Skates

Hydraulic Cutters

Nut Splitters

Flange Spreaders

Pipe Benders

Industrial Storage Cases

2,5-12,5(22 -116)

35-50(311-445)

0,75-1,00(6 -8,9)

8,5-20(75 -178)

1-80(8,9 -712)

3-20(26 -178)

5-90(45 -801)

5-10(45 -101)

Nominal Bore15-100 mm

157®

Tool Section Overview

ST

MS

SP

WR

SOH

ER

WHCWMC

NC

FS

STB

CM

158 E

160 E

164 E

168 E

169 E

170 E

172 E

174 E

175 E

176 E

178 E

Tool type and functions SeriesCapacityton (kN)

Page

ST-Series, Tool and Pump Sets

158

®


• Optimum match of individual setcomponents

• Pre-selected combinations, ready-for-use• Including pump, hose, gauge and gauge

adaptor and tool

PerformanceMatched Tool andPump Sets

H Here a hand pump-nut splitter set STN-1924H isused for a railroad maintenance job.

Flange Spreader

Separates pipe flanges with ease, enabling efficient maintenance tasks.

Nut Splitter

Splits nuts quickly and safely in seconds.

Punch

Designed for punching round, square or oblong holes through mild steel up to 12,7 mm thick.

Cutter

Cuts a wide range of steel wire, rope, bar, cable, strand and bolts.

H1 Tool Selection

Refer to the pages indicated for moretechnical information.

Page: 175

Page: 174

Page: 164

Page: 172

Punch-Electric Pump Set

The SP-35S light weightpunch is also available in aset with the PUD-1100Eelectric pump.

See the light weight hydraulic punchpage for more detailed information.

Page: 165

H Shown: STN-1924E

H2 Pump Selection (refer to the pump section for technical information) Accessories included

Tool and Pump Sets

159®

5 (45)

10 (101)

5 (45)

10 (89)

15 (134)

20 (178)

35 (311)

50 (445)

90 (801)

35 (311)

4 (25)

20 (178)

3 (27)

FS-56FS-109

NC-1319NC-1924NC-2432NC-3241NC-4150NC-5060NC-6075SP-35S

WHC-750WHC-1250WHC-3380

STF-56H–

STN-1319H*–––––––

–––

–STF-109H

–STN-1924HSTN-2432HSTN-3241HSTN-4150H

––

STP-35H

STC-750HSTC-1250HSTC-3380H

––

–––––

STN-5060HSTN-6075H

–

–––

–STF-109B

STN-1319BSTN-1924BSTN-2432BSTN-3241BSTN-4150B

––

STP-35B

STC-750BSTC-1250BSTC-3380B

–STF-109A

STN-1319ASTN-1924ASTN-2432ASTN-3241ASTN-4150A

––

STP-35A

STC-750ASTC-1250ASTC-3380A

HC-7206HC-7206

HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206

HC-7206HC-7206HC-7206

GP-10SGP-10S

GP-10SGP-10SGP-10SGP-10SGP-10SGP-10SGP-10SGP-10S

GP-10SGP-10SGP-10S

GA-4GA-2

GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2

GA-2GA-2GA-2

Hand Pump

P-142

Hand Pump

P-392

Hand Pump

P-80

WalkPac**Battery Pump PBM-12001E

Turbo Air Pump

PAT-1102N

Hose ModelNumber

Gauge ModelNumber

Gauge AdaptorModel Number

Ordering example:

STF-109B

This set consists of:1. the 10 ton flange spreader FS-109,

2. the PBM-12001E WalkPac, battery powered light weight andportable electric pump

3. an HC-7206C hose including malecouplers on both ends

4. a GP-10S gauge with gauge adaptorGA-2

Note: See the relevant tool or pump sections in this catalog for full product descriptions.

* Includes GA-2 gauge adaptor. ** WalkPac™ sets feature HC-7206C hose.

STSeries


700 bar

Flange Spreaders

Nut Splitters

Punches

Cutters

TOOL AND PUMP SETSELECTION:

E1 Select the tool typeand capacity

E2 Select the pump to usewith it

E3 Find the set modelnumber in the bluematrix

ToolCapa-

city

ton (kN)

Tool ModelNumber

Set ModelNumber

MS2-4MS2-10MS2-20MS2-1020

2,5 (22)5 (50)

12,5 (116)5-12,5 (50-116)

35401959

266395

158

P-142P-392P-392P-392

HC-7206HC-7206HC-7206HC-7206

RC-55RC-106RC-256

RC-102, -106 and -256

GP-10SGP-10SGP-10SGP-10S

GA-2GA-2GA-2GA-2

MS2-Series, Maintenance Sets

160

®


• All sets include Enerpac pump, hose, cylinder and gauge• Lock-on or threaded connectors• Complete maintenance set for almost every maintenance

application

The UniversalHydraulic Tool Box

Maintenance Sets

Enerpac Maintenance sets are acomplete assortment of hydraulic

powered tools. Using these setsallows you to quickly configure a uniquetool to meet your most difficult jobs.Built around the Enerpac light weighthand pump, hose and cylinder, thesesets enable you to push, pull, lift, press,straighten, spread and clamp with forcesup to 12,5 ton.

H QUICK SELECTION CHART

Capacityusing attachments*

ton (kN)

Number ofAttach-ment

Compo-nents

Weight

(kg)

* If no attachments are being used, capacity is double these values. Maximum operating pressure is then 700 bar.

H Shown: MS2-10

F Clamping a workpiece is just one ofthe many applications for theEnerpac maintenance sets.

More Information

For detailed information onall included attachments, see the next pages.

Page: 162

Universal Maintenance Sets

161®

CAUTION!

When cylinders are usedwith maintenance set attachments or components,

the maximum system pressure must belimited to half the rated pressure (350 bar).

max.50%

MSSeries

Capacity (using attachments):

2,5-12,5 tonMaximum Operating Pressure:

350 barH APPLICATION EXAMPLES

■3 Collar Toe

■4 Flat Base

■21 Lock Pins

■18 Chain with Hook

■1i Threaded adaptor

■8 Collar Clamp Head

■27 457 mm Extension Tube

■21 Lock Pin

Lock Pin ■21

Smooth Saddle ■11 attached to the plunger

using a Threaded Adaptor ■1ii

Double Chain Plate ■17 attached to the plunger using

a Threaded Adaptor ■1ii

■6 Lock-on Clamp Toe

■15 Rubber Flex Head

■27 127 mm Extension Tube

127 mm Extension Tube ■27 ■27 254 mm Extension Tube■22 Lock-on Connector

■19 Pipe Coupling

■1 Threaded adaptor

■16 Single Chain Plate


■■10 Serrated Saddle,attached to the Plunger using a Threaded Adaptor ■1i

■2 Base Attachment

■4 Flat Base,attached to the Base Attachmentusing a Threaded Connector ■5

■17 Double Chain Plate,attached to the BaseAttachment ■2 using aThreaded Adaptor ■5

Model No.A-23

A-13

A-28

ton

2,5

5,0

12,5

A3/4"- 16 UN

1"- 8 UN

11/2"- 16 UN

AC D

B

Set Model Number MS2-4 MS2-10 MS2-20 MS2-1020Base/Collar/Plunger Attachments 2,5 ton 5,0 ton 12,5 ton 5,0-12,5 ton

■1 Threaded Adaptor A-23 A-13 A-28 A-13 andA-28

■2 Base Attachment A-25 A-21 A-27 A-21 andA-27

■3 Collar Toe A-1034 A-20 A-595 A-20 andA-595

■4 Flat Base MZ-4010 A-14 A-243 A-14 andA-243

■5 Threaded Connector A-545 A-10 — A-10 (2x)

■6 Lock-On Clamp Toe — A-8 — A-8

■7 Threaded Plunger Toe A-530 A-6 — A-6

■8 Collar Clamp Head MZ-4011 A-192 — A-192

■9 Spreader Toe — A-305 — A-305

■10 Serrated Saddle A-531 A-18 — A-18

■11 Smooth Saddle — A-185 — A-185

■12 90° V-Base A-532 A-15 — A-15

■13 Plunger Base — — A-607 A-607

■14 Wedge Head A-629 A-129 — A-129

■15 Rubber Flex-Head A-539 A-128 — A-128Chains and Attachments for Pulling 2,5 ton 5,0 ton 12,5 ton 5,0-12,5 ton

■16 Single Chain Plate A-558 A-132 A-238 A-132, -238

■17 Double Chain Plate — A-5 (2x) — A-5 (2x)

■18 Chain with Hook A-557 (2x) A-141 (2x) A-218 (2x) A-141 (2x) andA-218 (2x)

Tubes, Connectors and Adaptors 2,5 ton 5,0 ton 12,5 ton 5,0-12,5 ton

■19 Pipe Coupling A-544 A-19 (2x) A-242 (2x) A-19 (2x) andA-242 (2x)

■20 Spreader WR-5 A-92 — A-92

■21 Lock Pin MZ-4013 (4x) A-16 (4x) — A-16 (4x)

■22 Lock-On Connector MZ-4007 (3x) MZ-1050 (2x) — MZ-1050 (3x)

■23 Male Lock-On Adaptor MZ-4008 (2x) MZ-1051 — MZ-1051 (2x)

■24 Female Lock-On Adaptor MZ-4009 MZ-1052 — MZ-1052

■25 Adjustable Extension — A-285 — A-285

■26 Slip-Lock Extension A-650 — — —

■27 Extension Tubes 76 mm long MZ-4002 — — —127 mm long MZ-4003 MZ-1002 — MZ-1002254 mm long MZ-4004 MZ-1003 A-239 MZ-1003

and A-239457 mm long MZ-4005 (2x) MZ-1004 A-240 MZ-1004 (2x)

and A-240584 mm long MZ-4006 (2x) — — —762 mm long — MZ-1005 A-241 MZ-1005 (2x)

and A-241

■28 Case CM-6 CW-166 CW-166 CW-350Weight (complete set in case) 26 kg 63 kg 95 kg 158 kg

MS2-Series, Maintenance Sets

162

®


* A-243 is a round base model

Note: All dimensions in millimetres.B

28

31

47

C

26

55

69

D3/4"- 14 NPT

11/4"- 111/2 NPT

2"- 111/2 NPT

■1 Threaded Adaptor

Model No.A-25

A-21

A-27

ton

2,5

5,0

12,5

AD

C

B

■2 Base Attachment

Model No.A-545

A-10

ton

2,5

5,0

A3/4"- 14 NPT

11/4"- 14 NPT

B

AA

B

35

41

■5 Threaded Connector

Model No.A-8

ton

5,0

A

17

B

28

B

C

D

A

C

50

D

57

■6 Lock-on Clamp Toe

A3/4"- 14 NPT

11/4"- 111/2 NPT

2"- 111/2 NPT

B

50

57

63

C

12

12

12

D

44

65

98

Model No.A-1034

A-20

A-595

ton

2,5

5,0

12,5

B

C

D

A■3 Collar Toe

A

11/2"- 16 UN

21/4"- 14 UN

35/16"- 12 UN

B

54

80

103

C

50

57

51

D

31

57

80

Model No.MZ-4010

A-14

A-243*

ton

2,5

5,0

12,5

C

D

B

A■4 Flat Base

A3/4"- 14 NPT

11/4"-111/2 NPT

2"- 111/2 NPT

B

114

165

165

C

31

35

58

D

63

88

165

Base/Collar/Plunger AttachmentsCAUTION!

When cylinders are used with maintenance setattachments or components, the maximumsystem pressure must be limited to half therated pressure (350 bar).

max.50%

Universal, Maintenance Sets

163®

Model No.A-530

A-6

ton

2,5

5,0

A3/4"- 14 NPT

11/4"- 111/2 NPT

B

C

D

A

B

57

28

C

25

31

D

33

57

■7 Threaded Plunger Toe

Model No.A-629

A-129

ton

2,5

5,0

A3/4"-14 NPT

11/4"-111/2 NPT

A

C D

B

B

69

101

C

33

50

D

28

44

■14 Wedge Head

Model No.WR-5

A-92

ton

2,5

5,0

A

—

21/4"-14 UN

C

B

D A

B

223

244

C

9

35

D

94

158

■20 Spreader

Model No.A-539

A-128

ton

2,5

5,0

A3/4"-14 NPT

11/4"-111/2 NPT

A

B

C

B

44

86

C

69

86

■15 Rubber Flex-Head

Model No.MZ-4013

A-16

ton

2,5

5,0

A

6,4

11,2

B

60

82

■21 Lock Pin

Model No.MZ-4007

MZ-1050

ton

2,5

5,0

A

19

33

B

A

B

79

127

■22 Lock-on Connector

Model No.MZ-4008

MZ-1051

ton

2,5

5,0

A3/4"-14 NPT

11/4"-111/2 NPT

B

AC

C

19

33

B

60

90

■23 Male Lock-on Adaptor

Model No.MZ-4009

MZ-1052

ton

2,5

5,0

A3/4"-14 NPT

11/4"-111/2 NPT

B

AC

C

19

33

B

65

96

■24 Female Lock-on Adaptor

Model No.A-285

ton

5,0

A

11/4"-111/2 NPT

B

C

AD

B

335

C

441

D

33

■25 Adjustable Extension

Model No.A-650

ton

2,5

A3/4"-14 NPT

B

C

AA

B

200

C

365

■26 Slip-Lock Extension

Model No.MZ-4011

A-192

ton

2,5

5,0

A3/4"-14 NPT

42

BA

DC

B

49

63

C

76

50

D

11/2"-16 UN

21/4"-14 UN

■8 Collar Clamp Head

Model No.A-531

A-18

ton

2,5

5,0

A3/4"- 14 NPT

11/4"- 111/2 NPT

AC

B

C

27

38

D

31

50

■10 Serrated Saddle

Model No.A-532

A-15

ton

2,5

5,0

A3/4"-14 NPT

11/4"-111/2 NPT

A

C B

D

B

38

54

C

47

57

D

25

54

■12 90° V-Base

Model No.A-185

ton

5,0

A

11/4"-111/2 NPT

AC

B

B

38

C

50

■11 Smooth Saddle

Model No.A-305

ton

5,0

A

11/4"-111/2 NPT

A CD

B

B

114

C

25

D

50

■9 Spreader Toe

Model No.A-607

ton

12,5

A

2"-111/2 NPT

B

AC

B

166

C

38

Model No.A-558

A-132

A-238

ton

2,5

5,0

12,5

A

11/2"-16 UN

21/4"-14 UN

35/16"-12 UN

D

C

A

B

B

196

307

450

C

39

63

102

D

44

79

125

■16 Single Chain Plate

Model No.A-557

A-141

A-218

ton

2,5

5,0

12,5

Chain Length

1,5 meters

1,8 meters

2,4 meters


Model No.A-544

A-19

A-242

ton

2,5

5,0

12,5

A3/4"-14 NPT

11/4"-111/2 NPT

2"-111/2 NPT

AC

B

B

42

49

88

C

33

54

82

■19 Pipe Coupling

Model No.A-5

ton

5,0

A

11/4"-111/2 NPT

D

A

B C

B

130

C

50

D

126

■17 Double Chain Plate

Chains and Attachments for Pulling

Tubes, Connectors and Adaptors

B

A

■13 Plunger Base

SP-Series, Light weight Hydraulic Punch

164

®


HoleShape

Hole Size

(inch)

Hole Size

(mm)

BoltSize(inch)

BoltSize(mm)

Imperial** Metric**

0,31 0,380,440,530,560,690,780,810,310,380,440,50

0,31x0,750,38x0,750,44x0,750,50x0,75

7,99,511,113,514,317,519,820,67,99,511,112,7

7,9x199,5x1911,1x1912,7x19

–M8

M10M12

–M16M18

––

M8M10M12

–M8

M10M12

1/45/16

3/87/16

1/25/8–

3/41/4

5/16

3/87/16

1/45/16

3/87/16

H STANDARD PUNCHES AND DIESSELECTION CHART

• 12,7 mm thick capacity through mild steel • Round, oblong and square punches and dies are available

to solve your punching applications• Optional bevel dies allow punching through I-Beams and

channel iron• Long life Enerpac single-acting, spring return design• Durable steel case keeps tools and dies together and

provides for easy carrying and storage• CR-400 coupler included

Much Faster thanDrilling

Tool Kit SPK-10

Included with all 35 Tonpunches, this tool kit is usedto remove and install thepunch into the head.

Can be ordered as a replacement undermodel number SPK-10.

Ordering Information

The 35 ton hydraulic Punchmay be ordered by itself oras a set, including anelectric pump.

A punch or die may also be orderedseparately or as a matched set. Please refer to the Quick Selection Chartinformation on top of next page.

** Material thickness should not exceed hole diameter

H Shown: SP-35S

F This PUD-1100E is availableas a matched set with the35 ton punch.

Maximum allowable material thickness to be punched(See listing)

(in)

Bevel Punch & Die Set for INP-Beams (14%)

Model Numbers

Single-Acting, Spring Return Hydraulic Punch

165®

SPD-313SPD-375SPD-438SPD-531SPD-563SPD-688SPD-781SPD-813SPD-458SPD-549SPD-639SPD-728SPD-106SPD-125SPD-188SPD-250

SD-313SD-375SD-438SD-531SD-563SD-688SD-781SD-813SD-458SD-549SD-639SD-728SD-106SD-125SD-188SD-250

SP-313SP-375SP-438SP-531SP-563SP-688SP-781SP-813SP-458SP-549SP-639SP-728SP-106SP-125SP-188SP-250

SBD-313SBD-375SBD-438SBD-531SBD-563SBD-688

––––––––––

––

SBDU-438SBDU-531

–SBDU-688

––––––––––

Standard Punch & Die Set

Standard Punch

Standard Die

1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11)

7,99,7

11,212,712,712,712,712,77,99,7

11,212,77,99,7

11,212,7

7,99,7

11,212,712,712,712,712,77,99,7

11,212,77,99,7

11,212,7

6,47,99,7

11,212,712,712,712,76,47,99,7

11,26,47,99,7

11,2

6,47,99,7

11,211,211,211,211,26,47,99,7

11,26,47,99,7

11,2

6,47,99,7

11,212,712,712,712,76,47,99,7

11,26,47,99,7

11,2

6,47,97,99,7

11,210,29,77,96,47,97,99,76,47,97,99,7

3,34,84,86,46,46,46,44,83,34,84,86,43,34,84,86,4

4,86,47,97,99,77,97,97,94,86,47,97,94,86,47,97,9

6,47,97,99,7

11,210,29,77,96,47,97,99,76,47,97,99,7

6,47,97,99,7

11,210,29,97,96,47,97,99,76,47,97,99,7

6,47,97,99,7

11,210,29,77,96,47,97,98,66,47,97,99,7

Steel Qualities (see table below):

1) Mild A-72) Boiler Plate3) Structural A-364) Struct Corten (ASTM A242)5) Cold Rolled C-10186) Hot Rolled C-1050

7) Hot Rolled C-10958) Hot Rolled C-1095 Annealed9) Stainless Annealed

10) Stainless 304 Hot Rolled11) Stainless 316 Cold Rolled

* Punch oil capacity: 76 cm3

Includes the following punch and die sets: ** SPD-438, SPD-688, SPD-563 and SPD-813*** SPD-375, SPD-531, SPD-438 and SPD-688

SP-35SP-35SSP-35SPEMSP-351MSP-351PE

–Standard**Standard**Metric***Metric***

1618292132

––

HC-7206–

HC-7206

SP-35SP-35SP-35SP-35SP-35

––

PUD-1100E–

PUD-1100E

ModelNumberPunch &

Die Set

Weight

(kg)

HosePump

H QUICK SELECTION CHART Included

��

��

CAUTION!

Chart beneath is forreference only! Maximumallowable material thicknessto be punched varies withset wear.

Bevel Punch & Die Set for UNP-Beams (8%)

SPSeries

Capacity:

35 tonHole Sizes:

7,9- 20,6 mmMaximum Operating Pressure:

700 bar

��

��

��

8 or 14%

*

Maximum allowable material thickness to be punched (mm)

166

®

Hydraulic Technology WorldwideSP-Series, 50 ton Hydraulic Punch

• Available as a complete set including electric pump andhoses

• Double-Acting cylinder design for fast cycle times• Punch and die changeover tools included• Lifting handle for easy carrying• Adjustable power stripper prevents movement of the metal

during stripping• CR-400 couplers included

Bevel Dies

For punching applicationsthrough I-beams andchannel iron, 8° Bevel Diesare available as accessories.

Page: 167

Ordering Information

The 50 ton hydraulic Punchmay be ordered by itself oras a set with an electricpump.A punch or die may be

ordered separately or as a matched set.Please refer to the selection chartinformation.

Foot Mounting Kit

A foot mounting kit for easymounting of the 50 tonpunch to workbench orfixture is available Please order: SP-120

Depth Stop

For simplified repetitivepunching applications anadjustable Depth Stop isavailable.Order model number: SP-110

Cuts the Time SpentForming Holes

Save time using this 50 ton Enerpac Punch. E

H Shown below is the 50 tonpunch with SP-120 and SP-110 assembled.

H Shown: SP-50100

167®

Double-Acting, 50 ton Hydraulic Punch

SPSeries

Capacity:

50 tonHole Sizes:


700 bar

SP-150SP-170SP-190SP-121SP-123

SD-530SD-630SD-730SD-830SD-930

SDB-530SDB-630SDB-730SDB-830SDB-930

SP-530SP-630SP-730SP-830SP-930

Standard Punch & Die Set

Standard Punch

Standard Die

8%Bevel Die Maximum allowable material thickness

to be punched (mm)*

HoleShape

Hole Size

(mm)

BoltSize

(mm)

13,516,719,823,126,2

M12M16M18M22M24

Model Numbers 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11)

Steel Qualities (see table below):

1) Mild A-72) Boiler Plate3) Structural A-364) Struct Corten (ASTM A242)5) Cold Rolled C-10186) Hot Rolled C-10507) Hot Rolled C-10958) Hot Rolled C-1095 Annealed9) Stainless Annealed

10) Stainless 304 Hot Rolled11) Stainless 316 Cold Rolled

H STANDARD PUNCH AND DIE SELECTION CHART

SP-50100SP-5000E

All**All**

115174

–HC-7206

SP-50SP-50

–PER-3408E

Set ModelNumberPunch &

Die SetsModel

NumberPunch*

Weight

(kg)

Hose(2x)

Pump

H QUICK SELECTION CHART PUNCH SETS Included

* Punch Oil Capacity:Advance: 278 cm3

Retract: 229 cm3

** All standard sets from chart below.

CAUTION!

Chart beneath is forreference only! Maximumallowable material thicknessto be punched varies withset wear.

* Material thickness should not exceed hole diameter

SP-50

SP-110 SP-120

13,5––

14,214,2

13,5––

14,214,2

13,5––

14,214,2

13,5––

12,711,2

13,5––

14,214,2

12,413,012,48,97,9

8,18,18,15,64,8

10,210,210,28,97,9

12,413,012,48,97,9

12,413,012,78,97,9

12,413,012,48,97,9

• WR-15: For long stroke spreading applications• WR-5: For use in very confined work areas• A-92: Spreader attachment; threads on RC-Series 10 ton

cylinders (except RC-101)

Hydraulic Wedgie and Spread Cylinders

168

®


1 (8,9)

0,75 (6)

1 (8,9)

93235

6,514,5

–

10,064,1

–

93235

94292158

223549244

–5669

515150

5115791

2,311,33,6

2842

21/4"- 14 UNS

WR-5WR-15A-92

CylinderCapacity

ton (kN)

TipClear-ance(mm)

CylinderEffective

Area(cm2)

Oil Capacity

(cm3) A B C D E F J

Weight

(kg)

ModelNumber

JA

B

EC

F

3/8"-18NPT

3/8"-18NPT

C

BJ

F

AD E

FD

C

A BEJ

WR-5

WR-15

A-92

Capacity:

0,75-1 tonTip Clearance:

9 mmMaximum Spread:

292 mmMaximum Operating Pressure:

700 bar

Dimensions (mm)

H A WR-5 wedgie cylinder is used to positiona concrete block on a construction site.

A/WRSeries

H Shown from top to bottom: WR-15, A-92, WR-5

Hydraulic Machine Lifts

169®

• For lifting heavy equipment with minimum available access• Separate hydraulic pump enhances safety• Low height lifting toe• Precision guided to reduce friction and isolate cylinder

from side-loads• Two extendible support feet provide extra stability• Includes RC-Series Cylinder with CR-400 coupler

SOH-10-6SOH-23-6

8,5 (75)20 (178)

Capacity

ton(kN)

Stroke

(mm)Minimum

A1Central

A2Maximum

A3

Total Ext. Height

C

Total BodyHeight

D F H J K

Weight

(kg)

ModelNumber

136157

2030

95110

169190

430472

294315

–65

190260

214249

7480

2645

K

K

H

D

J FA1

C

A3

A2

Load Skates

In combination with theEnerpac Machine Lifts werecommend Load Skates formoving heavy loads.

Page: 170

Best Match Hand Pump

To power your EnerpacMachine Lift, the Enerpac P-392 hand pump is an idealchoice.

Page: 54

Lifting Capacity:

8,5 - 20 tonStroke:

136-157 mmToe Clearance:


700 bar

Toe Clearance (mm) Dimensions (mm)

SOHSeries

H Shown: SOH-10-6

ER-Series, Heavy Duty Load Skates

Move Heavy LoadsEasily and Safely

170

®


• Rugged and sturdy construction for long life• Low profile construction for increased stability• Low rolling-resistance allows for easy transportation• Attachable load leveling plates and swivel turntables

for turning corners

H Load Skates may be ordered separately or as a matched set.

Machine Lifts

To place the Load Skates,the load must first be lifted.This can be done easily andsafely using EnerpacMachine Lifts.

Page: 169

Set ModelNumber

Load Skates (4)

WeightIncludinghandles

and metal box

(kg)

Set Capacity*

ton (kN)

20 (178)30 (267)60 (533)

ERS-20ERS-30ERS-60

Turntable Swivels (2)

Leveling Plates (2)

ER-10ER-15ER-30

ES-10ES-15ES-30

ELP-10ELP-15ELP-30

495575

Sets (see table) includes allcomponents necessary tohandle a variety ofapplications. Link-up Bars (2), Handles (2)

ERH-1 and Metal Box (1) EMB-1 areincluded. Designed to handle rugged moves yetare light weight for portability.

* Sets are designed to enable two skates to take full load for extra safety on uneven floor surfaces

F Heavy transport using Load Skates. The machine is first lifted, using Enerpac Machine Lifts.

H Shown: Set ER-20

Heavy Duty Load Skates

171®

TurntableSwivel

LoadSkates

B

C

F ED

A

C

E

B

D

A

D

C

A

B B

A

D

C

D

C

A

B

A

BE

C

ER-1, ER-10, ER-15, ER-30

Turntable Swivel ES-1, ES-10, ES-15, ES-30

Turntable Swivel ES-60, ES-80

Leveling PlateELP-10 ELP-15 ELP-30

Leveling PlateELP-60ELP-80

ER-60, ER-80

ERSeries

Maximum Carrying Capacity:

80 ton

LevelingPlate

A

ModelNumber

B C D E

Weight

(kg)

ContactRolls per

Skate

Rollersper

Skate

ER-1ER-10ER-15ER-30ER-60ER-80ES-1ES-10ES-15ES-30ES-60ES-80ELP-10ELP-15ELP-30ELP-60ELP-80

8410111413016818286728596

114128728596

114128

138209220270381530207219219250275360149149177270350

666674921251467141414861614141486161

–172330415094130130150190220119119134180199

–5060687685–––––––––––

554446–––––––––––

Capacity*

ton (kN)

11015306080

110153060801015306080

(8,9)(89)(133)(267)(533)(711)(8,9)(89)(133)(267)(533)(711)(89)(133)(267)(533)(711)

121513131317–––––––––––

3,45,27,3

13,031,960,93,14,54,56,7

13,718,93,73,75,3

13,818,8

Dimensions (mm)

Hydraulic Cutterheads

172

®


• Single-acting, spring return on all models, except WHR-1250

• Guillotine action for easy operation• Lifting handles on larger models for easy transport• Carrying bag included for easy carrying and tool

protection• Ideal for use with most Enerpac pumps featuring

3-way valve or dump valve and 700 bar pressure rating(except WHR-1250, which requires 4-way valve)

• CR-400 coupler and dust cap included on all models

WHC/WHRSeries

Capacity:

3-20 tonCutting Capacity:


700 bar

Cutter Head

Operation

Capa-city

ton

ModelNumber

Oil Capa-

city

(cm3)

Length

(mm)

SteelWire

Rope,Hemp-coreor

IWRC6x7

6x126x19

CopperWire or

Bar

Alumi-nium

Wire orBar

SoftSteelBolts

Rein-forcing

Bar

BareCopper

WireStrands

BareAlumi-niumWire

Strands

6x7

ACSR GuySteelWire

Strands

1x71x19

Tele-phoneCableCPP

Under-groundCable

(Power)

Weight

(kg)

Single-Acting

Dbl.-Act.

420133820

19,7134,4119,665,5

137,7122,9

127279381482609419

193125?

?

31

192831?

?

31

193131?

?

31

192822?

?

28

1225?

?

?

25

19315041?

31

19315042?

31

193150?

?

31

162219?

?

22

?

?

?

85101?

?

?

5085

101?

3,211,310,49,1

14,511,8

WHC-750*WHC-1250*WHC-2000WHC-3380*WHC-4000WHR-1250

Round Bar Wire Strand Cable

H Selection Chart Maximum Cutting Capacities (ø in mm)

Replacement Blades

To order 60-62HRchardened replacementblades use one of the modelnumber shown below.

For CutterModel Number

Order BladesModel Number

WHC-750WHC-1250WHC-2000WHC-3380WHC-4000WHR-1250

WCB-750WCB-1250WCB-2000WCB-3380WCB-4000WCB-1250

Tool Sets

All Hydraulic Cutter-heads marked with an

* are available as sets(pump, tool, gauge, couplers

and hose) for your ordering convenience.

Page: 158

WalkPac

* Available in sets. ? Will not cut designated material

H Shown from left to right: WHC-3380, WHC-750

Self-Contained Hydraulic Cutters

173®

H Shown from left to right: WMC-2000, WMC-750

• Rotating heads for operator convenience• Guillotine action for easy operation• Carrying bag included for easy carrying and tool

protection• Velcro straps to secure handles on larger models for easy

carry• Spring return for easy operation• Light weight self-contained tool, can be used anywhere

WMCSeries

Capacity:

3-20 tonCutting Capacity:


700 bar

Capa-city

ton

Model Number

Length

(mm)

SteelWire

Rope,Hemp-coreor

IWRC6x7

6x126x19

CopperWire or

Bar

Alumi-nium

Wire orBar

SoftSteelBolts

Rein-forcing

Bar

BareCopper

WireStrands

BareAlumi-niumWire

Strands

6x7

ACSRWire

Strands

Guy SteelWire

Strands

1x7

Guy Steel Wire

Strands

1x19

Tele-phoneCableCPP

Under-groundCable

(Power)

Weight

(kg)

4 420206133

381381679679558628660

1619?

311925?

161719281931?

161719311931?

161719311922?

1619?

31385046

1619?

31415042

1619?

314150?

1414?

221619?

1414?

251619?

1617?

?

415085

?

?

?

?

?

?

85

?

?

1922?

?

?

3,63,6

11,310,46,8

10,910,0

WMC-580WMC-750WMC-1000*WMC-1250WMC-1580WMC-2000WMC-3380

Round Bar Wire Strand Cable

* Cuts 12 mm alloy chain grade 70 (type G7 transport or tie-down) or grade 80 (for overhead lifting applications)

CAUTION!

A “?” in the charts on thesepages means that thishydraulic cutter is not

designed to cut this size or type ofmaterial. Any attempt to do so may resultin personal injury and damage to the unitand will void the warranty.

Replacement Blades

To order 60-62HRchardened replacementblades use one of the modelnumber shown below.

H Selection Chart Maximum Cutting Capacities (ø in mm)

For Cutter Model Number

Blades Model Number

WMC-580WMC-750WMC-1000WMC-1250WMC-1580WMC-2000WMC-3380

WCB-750WCB-750WCB-1000WCB-1250WCB-1580WCB-2000WCB-3380

? Will not cut designated material

Hydraulic Nut Splitter

174

®


• Compact and ergonomic design, easy to use• Unique angled head design• Single-acting, spring return cylinder• Heavy duty chisels can be reground• Applications include service trucks, piping industry, tank

cleaning, petrochemical, steel construction, mining, etc.

F Easily removing rusty nuts during railroad construction is just one of manyapplication examples forthe Enerpac Nut Splitter.

NC-1319NC-1924NC-2432NC-3241NC-4150NC-5060NC-6075

M6-M12M12-M16M16-M22M22-M27M27-M33M33-M39M39-M48

10 - 1919 - 2424 - 3232 - 4141 - 5050 - 6060 - 75

5101520355090

15206080

155240492

48627288

105128181

1,22,03,04,48,2

11,834,1

284051667490

110

19262936455472

7101317212326

170191222244288318393

4054647594

106156

Bolt Range Hexagon NutRange

(mm)

Capa-city

ton

OilCapa-

city (cm3)

Weight

(kg)

ModelNumber

A B C D F H

D

F

B

H

3/8"-18NPT

A

C

Capacity:

5-90 ton

NCSeries

Bolt Range:

M6-M48Maximum Operating Pressure:

700 bar

Ordering Notes: Maximum allowable hardness to split is HRc-44. Not to be used on square nuts.

For Jobs ‘On-the-Road’Nut Splitter Set NC-2450Q

Set in metal case with NC-2432, NC-3241,NC-4150, couplers andspare chisels.

Dimensions (mm)Enerpac NutSplitters

Nut Splittersinclude a sparechisel, a spare

set screw and the wrenchused to secure the chisel.A CR-400 coupler isstandard.

Tool Sets

All Hydraulic NutSplitters are available

as sets (pump, tool,gauge, couplers and hose) for

your ordering convenience.

Page: 158

WalkPac

H Shown from left to right: NC-3241, NC-1319, NC-1924

Pipe Size (mm)

FS-56 FS-109

For flanges that require larger spreadingdistance and have a larger joint, anoptional larger wedge is available .

F-109-7For Model Order Model Number

FS-56 and FS-109

Hydraulic Flange Spreader

175®

• Light weight, ergonomic design for ease of use• Adjustable jaw widths from 59 mm to 224 mm for a wide

range of applications• Single-acting, spring return RC-Series cylinders for fast

trouble-free operation

FSSeries

Capacity:

5 and 10 tonSpread:

59 - 224 mmMaximum Operating Pressure:

700 bar

J

H

F

C

E

B

A

I

MaximumFlange

Thickness(mm)

Stud Size

(mm)

StandardWedge

(mm)

Capa-city

ton

Stroke

(mm)

OilCapa-

city(cm3)

ModelNumber

A B Min. Max.

C

Dimensions (mm)

E F H I J

Weight

(kg)

2 x 572 x 92

19 - 2831- 41

3 - 283 - 28

510

3854

24,678,7

5961

163224

201158

6988

2538

206273

1931

2,35,4

209279

76108

FS-56FS-109

Tool Sets

Both Hydraulic FlangeSpreaders are available assets (pump, tool, gauge,couplers and hose)

for your ordering convenience.Page: 158

WalkPac

Flange Spreader Matching Chart

ASA Rating

(bar)

1020273562

103172

127 - 50863 - 35563 - 30463 - 25412 - 15212 - 8812 - 63

558 - 1066406 - 711355 - 609304 - 508203 - 406101 - 20376 - 101

H Shown: FS-56

STB-Series, Pipe Bender Sets

176

®


H Shown: STB-101H

• Bends with smooth, wrinkle-free bends• Light weight heat treated aluminium bender frame• All sets contain angle indicator Z-12091 for

accurate bending• Powered by hand, air or electric pump• Genuine Enerpac cylinders, including HC-7206 hose

(Eject-O-Matic bender sets include 2 hoses)• Set includes sturdy steel storage gauge

‘One Shot’ and ‘Sweep’

One shot shoes give a 90° bendwithout resetting.

Sweep shoes are used where increasingradii are required for multiple parallelpipe installations.

Quick, Safe andWrinkle-freeBending

––

PUJ-1200E––

PUR-3409E

–PAT-1102N

––––

P-392––

P-84P-80

–

RC-1010RC-1010RC-1010RR-1010RC-2510RR-3014

CM-4CM-4CM-4CM-4CM-7CM-7

––––

65-100-

15-50

25-50

32-100

•

•

STB-101H STB-101ASTB-101ESTB-102HSTB-221HSTB-202E

* See corresponding sections of this catalog for more detailed specifications.

65477368

115196

One Shot Sweep

SetModelNumber

Electric Pump*Air Pump*Hand Pump* Cylinder* Steel CaseEject-O-

Matic

Weightincl. case

(kg)

H SELECTION CHARTPipe Range

Nominal Bore (mm)

Steel pipe is quickly Eand safely bend up to

90° using the STB-101HPipe Bender Set

Eject-O-Matic™

Eject-O-Matic benders have double-acting cylinders tohydraulic ally eject the pipe from the bending shoe.

Pipe Bender Sets

177®

Custom Ordering

If you already own an Enerpac pump andcylinder set, bender sets can be orderedwithout hydraulics. Just change the bender setmodel number suffix to “X”. Check the chart tobe sure you have the correct cylinder.

If you prefer a different pump to go with your bender set,just schange the bender set model number suffix to “N”.followed by the pump model number of your choice. See Pump Section.

STBSeries

Max. Pipe Capacity:

100 mm nominal boreStroke:


700 bar

Bending Shoe Model Nr.

NominalInside

Diameter(mm)

Mild Steel Pipe

Max.Outside

Dia.(mm)

Max. Wall

Thickness(mm)

Max. Pipe

Schedule

BendCentreline

Radius

(mm)

Included One-Shot Bending Shoes (NB = Nominal Bore) Included Sweep Bending Shoes SetModelNumber

STB-101HSTB-101ASTB-101ESTB-102HSTB-221HSTB-202E

Z-12011Z-12021Z-12031Z-12041Z-12051Z-12061Z-12341Z-12351Z-12391Z-12392Z-12382Z-12383Z-12384Z-12385

Z-12011

(15 NB)

Z-12021

(20 NB)

Z-12031

(25 NB)

Z-12041

(32 NB)

Z-12051

(40 NB)

Z-12061

(50 NB)

Z-12341

(65NB)

Z-12351

(80 NB)

Z-12391

(90 NB)

Z-12392

(100 NB)

Z-12382

(65 NB)

Z-12383

(80 NB)

Z-12384

(90 NB)

Z-12385

(100 NB)

152025324050658090100658090100

21,326,633,442,248,360,373,088,9

101,6114,373,088,9

101,6114,3

3,74,04,55,05,05,57,07,68,06,07,07,68,06,0

8080808080808080804080808040

83115146184210235267330445508267330445508

•••

•••

••••••

••••••

••••••

•••••• • • • •

• • • •

H Bending Shoe Capacities

Swee

pO

ne S

hot

Electrical Conduit

Page: 53

Industrial Storage Cases

178

®


Protect yourEquipment

CM-16, CM-34, CM-36• Protect your equipment from dust, water, grease and dirt • Constructed of durable 16 gauge steel• Reduce losses on the jobsite, maintenance area or shop• Heavy duty hinges and lifting handles• Painted with rust-resistant primer and finished in durable

enamel

CM-1, CM-4, CM-5, CM-6, CM-7• Constructed of 16 gauge steel (CM-4), 14 gauge steel

(CM-7) or 20 gauge steel (CM-1, CM-5, CM-6)• Heavy duty hinges and lifting handles

Case Size

(litres)

Length

(mm)

Length

(mm)

Width

(mm)

Width

(mm)

Height(mm)

Rear Front

ModelNumber

141932

127212453926

1076

CM-5CM-6CM-1CM-4CM-7CM-16CM-34CM-36

482596635787

1206121915241219

292177292457381609762762

117177168355457609863

1168

117177168355457609558

1168

–––––––

1219

–––––––

304

Case Dimensions Shelf Dimensions

For Your Convienience

You can order a set of fourcasters with mountinghardware for cases CM-16,CM-34 or CM-36.

The diameter is 101 mm and the treadwidth is 38 mm. Order model number:CM-44.

H When not storing the lifting system, this heavy-duty storagecase doubles as a work station.

H Shown: CM-34

179®

HModel Number Index

Page(s) H Page(s) H Page(s) H Page(s) H

AA . . 12, 109, 110

136, 162, 168AD . . . . . . . . . . . 138AH . . . . . . . . . . . 109AM . . . . . . . . . . . 110AR . . . . . . . . . . . 109AW . . . . . . . . . . . . . 12

BB . . . . . . . . . . . . . . 176BAD . . . . . . . . . . . 25BAP . . . . . . . . . 128BC . . . . . . . . . . . . . 62BD- . . . . . . . . . . 117BEH . . . . . . . . . 128BEP . . . . . . . . . . 128BFZ . . . . . . . . . . 111BHP . . . . . . . . . 144BLS . . . . . . . . . . . . 44BMP . . . . . . . . . 128BMZ . . . . . . . . . 148BP . . . . . . . . . . . . . 62BPR . . . . . . . . . 134BRC . . . . . . . . . . . 18BRD . . . . . . . . . . . 24BRP . . . . . . . . . . . 18BV . . . . . 120, 122

CC . . . . . . . . . . . . . . 108CAT . . . . . . 12, 17CD . . . . . . . . . . . 109CH . . . . . . . . . . . 109CLL . . . . . . . . . . . . 38CLP . . . . . . . . . . . 14CLR . . . . . . . . . . . 34CLS . . . . . . . . . . . 30CM . . . . . . . . . . . 178CR . . . . . . . . . . . 109

DDG . . . . . . . . . . . 117

EEAM . . . . . . . . . . . 87EGM . . . . . . . . . . 92ELP . . . . . . . . . . 170EMB . . . . . . . . . 170EP . . 150,153,155EPH . . . . . . . . . 154EPH- . . . . . . . . 155

EPP . . . . . . . . . . 153EPPMI . . . . . . 150EPX . . . . . . . . . . 153ER . . . . . . . . . . . . 170ERH . . . . . . . . . 170ERS . . . . . . . . . . 170ES . . . . . . . . . . . . 170

FF 105, 109, 175FH . . . . . . . . . . . . 109FM . . . . . . . . . . . 118FR . . . . . . . . . . . . 109FS . . . . . . . . . . . . 175FZ . . . . . . . . . . . . 111

GG . . . . . . . . . . . . . 114GA . . . . . . . . . . . 118GF . . . . . . . . . . . . 112GP . . . . . . . . . . . 112

HH . . . . . . . 106, 112

114HA . . . . . . . . . . . 106HB . . . . . . . . . . . 106HC . . . . . . . . . . . 106HF . . . . . . . . . . . . 110HP . . . . . . . . 21, 23

IIC . . . . . . . . . . . . . 122IPK . . . . . . . . . . . 138IPL . . . . . . . . . . . 138

JJBI . . . . . . . . . . . . . 12JH . . . . . . . . . . . . . . 49JHA . . . . . . . . . . . 48JHL . . . . . . . . . . . . 49JTA . . . . . . . . . . . . 48

LLH . . . . . . . . . . . . 139

MMP . . . . . . . . . . . 142MPA . . . . . . . . . 142MPL . . . . . . . . . 142MPP . . . . . . . . . 142MPR . . . . . . . . . 142

MS2- . . . . . . . . 160MSP . . . . . . . . . 164MZ . . . . . . . . . . . 162

NNC . . . . . . . . . . . 174NV . . . . . . . . . . . . 118

PP . . . . . 54, 56, 60PA . . . . . . . . . . . . . . 86PAH . . . . . . . . . . . 82P-AL . . . . . . . . . . 55PAM 84, 87, 88PAN . . . . . . . . . . . 88PAT . . . . . . . . . . . . 84PBM . . . . . . . . . . 62PBR . . . . . . . . . . . 62PC . . . 54, 58, 78PD . . . . . . . . . . . 117PED . . . . . . 70, 74PEJ . . . . . . . . . . . . 70PEM . . . . . 70, 74PEN . . . . . . . . . . . 74PER . . . . . . 70, 74PES . . . . . . 70, 74PFC . . . . . . . . . . . 78PGM . . . . . . . . . . 90PK . . . . . . . . . . . . 138PL . . . . . . . . . . . . . . 58PMB . . . . . . . . . 138PPH . . . . . . . . . . . 78PPK . . . . . . . . . . . 78PPN . . . . . . . . . . . 80PUD . . . . . . 64, 66PUF . . . . . . . . . . . 66PUJ . . . . . . 64, 66PUM . . . . . . . . . . 66PUR . . . . . . . . . . . 66

RRB . . . . . . . . . . . . . 12RC . . . . . . . . . . . . . . . 8RCA . . . . . . . . . . . 13RCH . . . . . . . . . . . 20RCS . . . . . . . . . . . 16REB . . . . . . . . . . . 12REP . . . . . . . . . . . 12RFL . . . . . . . . . . . . 88RPC . . . . . . . . . . . 62RR . . . . . . . . . . . . . 26RRH . . . . . . . . . . . 22

RSM . . . . . . . . . . 16

SSBD . . . . . . . . . 164SCH . . . . . . . . . . . 50SCL . . . . . . . . . . . 50SCP . . . . . . . . . . . 50SCR . . . . . . . . . . . 50SD . . . . . 164, 166SDB . . . . . . . . . 166SL . . . . . . . . . . . . . . 42SOH . . . . . . . . . 169SOP . . . . . . . . . 132SP . . . . . 164, 166SPD . . . . . . . . . 164SSG . . . . . . . . . 114ST . . . . . . . . . . . . . . 46STB . . . 176, 177STC . . . . . . . . . . 158STF . . . . . . . . . . 158STN . . . . . . . . . . 158STP . . . . . . . . . . 158

TT . . . . . . . . . . . . . . 116TM . . . . . . . . . . . 139

VV . . . . . . . 118, 124VA . . . . . . . . . . . . . . 87VC . . . . . 120, 122VM . . . . 120, 122

WWCB . . 172, 173WFS . . . . . . . . . . . 62WHC . . . . . . . . 172WHR . . . . . . . . 172WMC . . . . . . . . 173WR . . . . . . . . . . . 168

ZZ . . . . . . . 109, 176

2500 . . . . . . . . . 1144000 . . . . . . . . . 11411- . . . . . . . . . . . . . 6041- . . . . . . . . . . . . . 6143- . . . . . . 61, 11645- . . . . . . . . . . . . . 6172- . . . . . . . . . . . . . 6083- . . . . . . 61, 116

While every care has been taken in thepreparation of this catalog and all datacontained within is deemed accurate at thetime of printing, Enerpac does reserve the rightto make changes to the specifications of anyproduct, or discontinue any product, containedwithin this catalog without prior notice.All illustrations, performance specifications,weights and dimensions reflect the nominalvalues and slight variations may occur due tomanufacturing tolerances. Please consultEnerpac if final dimensions are critical.

®

AustraliaENERPAC, Applied Power Australia Ltd. (APSY)Block V Unit 3, Regents Park Estate391 Park RoadRegents Park NSW 2134(P.O. Box 261) AustraliaTel: +61 297 438 988Fax: +61 297 438 648

ChinaShanghai BlackhawkMachinery Co Ltd Room 907, China Record Building811, Hengshan RoadShanghai, 200030, ChinaTel: +86 21 6466 9134Fax: +86 21 6466 9139

CISENERPAC Applied Power MoscowLeninsky Prospekt 95a117313 Moscow, RussiaTel: +7 095 956 50 90Fax: +7 095 936 20 05

France, Switzerland, Turkey,Greece, Middle East, AfricaENERPAC S.A.B.P. 200, Parc d’Activités du Moulin de MassyF-91882 Massy CEDEX (Paris)FranceTél: +33 01 601 368 68Fax: +33 01 692 037 50

Germany, Scandinavia, EasternEurope, Austria, SwitzerlandENERPAC Applied Power GmbHP.O. Box 300113D-40401 Düsseldorf, GermanyTel: +49 211 471 490Fax: +49 211 471 49 28/40

Holland, Belgium, Luxemburg,ENERPAC B.V.Storkstraat 25 / P.O. Box 2693900 AG Veenendaal, HollandTel: +31 318 535 911Fax: +31 318 525 613

+31 318 535 848

HongkongENERPACRoom 907 WorkingbergCommercial Building41-47 Marble RoadNorth PointTel: +852-2561 6295Fax: +852-2561 6772

IndiaENERPAC Hydraulics (India) Pvt Ltd203 Vardhaman ChamberPlot #84, Sector 17Vashi, New Bombay 400705Maharashtra, India Tel: +91 22 763 10 62Fax: +91 22 767 03 09

ItalyENERPAC Applied Power Italiana S.p.A.Via Canova 4, 20094 Corsico (Milano)Tel: +39 2 458 274 1/2/3Fax: +39 2 486 012 88

JapanApplied Power Japan Ltd.10-17 Sasame Kita-Machi Toda-Shi, Saitama 335, JapanTel: +81 484 218 931Fax: +81 484 224 108

MalaysiaApplied Power Hytec (M) Sdn Bhd22-1, Jalan SS 15/8BSubang Jaya, 47500P.J. Selangor, West MalaysiaTel: +603 737 29 23/39/19Fax: +603 737 29 18

MexicoENERPAC Applied Power Mexico S.A. de C.V.Avenida Principal, La Paz #100Fracc. Industrial La Paz42084 Pachuca, HidalgoTel: +52 771 337 00Fax: +52 771 838 00

SingaporeApplied Power Asia Pte Ltd47 Jalan Pemimpin,#01-02 & 01-03 Sin Cheong Building Singapore 577200Thomson Road, P.O. Box 114Singapore 915704Tel: +65 258 16 77Fax: +65 258 28 47

South KoreaENERPAC Applied Power Korea Ltd.163-12 Dodang-DongChoong-Ku, Buchun-shi Kyunggi-Do (Seoul)Republic of KoreaTel: +82 32 675 08 36/37Fax: +82 32 675 30 02

Spain, PortugalENERPAC Applied PowerInternational S.A.Calle de la Imprenta, 7Polígono Industrial28108 Alcobendas (Madrid), SpainTel: +34 1 661 11 25Fax: +34 1 661 47 89

United Kingdom, IrelandENERPAC Limited Unit 3Colemeadow RoadNorth Moons MoatRedditchWorcester B98 9BPUnited KingdomTel: +44 1527 598 900Fax: +44 1527 585 500

USA, Canada, Latin America and CaribeanENERPACP.O. Box 325Milwaukee, ButlerWI 53201-0325 USATel: +1 414 781 66 00Fax: +1 414 781 10 49User Inquiries:+1 800 433 2766Distributor Inquiries & Orders:+1 800 558 0530

CanadaUser Inquiries:+1 800 426 4129Distributor Inquiries & Orders:+1 800 426 2284

World Wide Service Excellence

World WideAvailability

World StandardGuarantee

®H

ydrauc P

ower for a

ndustra

App

catons

97043.E(R) © 1997 Applied Power Inc.

Printed in the Netherlands.

E321e


®


CylindersPage 6-51

PumpsPage 52-92

SystemComponents

Page 105-118

Valves Page 119-125

PressesPage 126-139

PullersPage 140-155

ToolsPage 156-178

E321e

Documents

Hydraulic Power forall Industrial · PDF fileHydraulic Power forall Industrial Applications ... wheels, and later water pumps for ... quality, price and