EPH FN PLANETARY WINCHESModel EPH FN are hydraulic planetary winches. Designed for extend life and give best safe duty. These winches are built according with higher safety standards in compliance with Directive Machinery 2006/24/CE Harmonized EN 14492-1. The high efficiency planetary gear train assure fast payout and rewind winching operational and the innovative brake system, make these winches reliable and great for industrial applications.

1

2

4

FEATURES

1The Quality is Transparent

HYDRAULIC PLANETARY GEAR WINCHES

EN 14492-1

❏ COMPACTHardened steel single stage planetary gear train

❏ FAST WINCHING SPEEDFast payout and rewind

❏ VERSATILE MOUNTINGDesigned for either foot or side mounting

❏ LIGHT AND STRONGBody manufactured from hardened, special aluminium castings reduced weight and increased strength Powder coat finished

❏ MULTI-DISC PRESSURE RELEASED BRAKE Gives a reliable and effective full brake capacity

➊ HEAVY-DUTY ROLLER FAIRLEADHeavy duty mounting frame with zinc plated finish.Close tolerance machining, for perfect mounting onto winch body. Large diameter rollers, manufactured from hardened thick walled steel, and fitted with heavy-duty composite bushing, for reduced maintenance and increased rope life.

➋ CABLE TENSIONERStrong frame with heavy duty springs, zinc plated finish with roller in composite against rust, prevents wire rope tangling when free spooling.

➌ MANUAL CLUTCH Manual clutch for drum free spooling.

➍ HYDRAULIC MOTOROrbital hydraulic motor, splined output shaft. Painted finish.

➎ FULL LOAD HOLDING BRAKEMulti-disc pressure released brake, designed using special heavy duty components to assure full brake performance and reliability, controlled by a noiseless,overcenter valve.

MODEL PULLING CAPACITY

EPH 3600 FN 3.600 Kgs. (8.000 Lbs.)

EPH/L 3600 FN 3.600 Kgs. (8.000 Lbs.)

EPH 4500 FN 4.500 Kgs. (10.000 Lbs.)

EPH 5200 FN 5.200 Kgs. (11.460 Lbs.)

EPH 6200 FN 6.200 Kgs. (13.650 Lbs.)

EPH 6700 FN 6.700 Kgs. (14.770 Lbs.)

➏ OVERCENTER VALVESpecial noiseless overcenter valve based on Vime’s design for low profile hoses connection.

➐ AIR CLUTCHNew compact air - cylinder with aluminum body based on Vime’s own design. Can easily replace the manual clutch shifter in situ. Chromium plated out put shaft is visible when the drum is in the disengaged position.

➑ DRUMDual rope anchor point based on Vime’s own design in according with CE Machinery Directive to prevent rope release.

3

5

6

7

8

❏ DRUM SIZE AVAILABLE Standard: 200 mm (7.87 inch) for EPH 3600FNLong: 252 mm (9.92 inch) for EPH/L 3600 FNEPH 4500FN - EPH 5200FN - EPH 6200FN - EPH 6700FN

❏ TOTALLY OIL COOLED Gears and brake in oil bath for best performance, quiet operation and extended component life

ACCESSORIES : ❏ Zinc plated heavy-duty roiller fairlead ❏ Zinc plated Cable tensioner ❏ Air clutch shifter - drum free spooling

WINCHES RANGE

PLANETARY

COMPONENTS

LINE PULL 1st LAYER

GEAR RATIO

WORKING PRESSURE

LINE SPEED 1st LAYER

WIRE ROPE SIZE

WIRE ROPECAPACITY

MAX. WIRE ROPE CAPACITY EN 14492-1

MAX. WIRE ROPE CAPACITY ** DESCRIPTION WEIGHT

LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 105,38 lbs 47,8 kgs

8.000 3.600 5,3:1 2,320 160 48,6 14,8 - 10 98,4 30 141,1 43 239,5 73 ACCESSORY : ROLLER FAIRLEAD 21,61 lbs 9,8 kgs

- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 4,41 lbs 2,0 kgs

Hydraulic Motor.................................................................................................................(15,3 cu in)...250 cc Max. oil flow............................................................................................................(15,85 GPM)...60 Lt./Min.Mir clutch working pressure ........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar

DIMENSIONAL DATA

TECHNICAL DATA

3The Quality is Transparent

EPH FN winches are equipped with manual clutch shifter.Clutch allows the operator to manually disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling).Engaging the clutch, it locks the winch drum back onto the gear train.Air clutch shifter is considered such an optional accessory.

MANUAL CLUTCH VERSION

DANGEROUSDo not use winch to lift support or transport personnel.

1686,63

32,21,27

68026,78

40315,87

2128,35

2529,92

29211,50

219,88,66

522,05

351,38

250,98

340,513,41

E(Y) 361,43

10 E(X)0,39

1967,721104,33

301,18

301,18

12,60,50

233,59,19

2369,29

1024,02

357,514,07

1104,33

1315,16

210,83

562,20

401,57

141MAX

5,55

251MAX

9,88

200,79

M12

DIMENSIONAL DATA

On request at the order, EPH FN winches can be equipped with Air clutch shifter. An air cylinder allows to pneumatically disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.

AIR CLUTCH VERSION

1686,63

32,21,27

2128,35

2529,92

40315,87

522,05

351,38

29211,50

2309,05

69027,18

E(X) 110,43

250,98

340,513,41

1967,72

1104,33

301,18

301,18

12,60,50

2349,21

1024,02

355,514,00

1104,33

1315,16

210,83

233,59,19

562,20

401,57

200,79

M12

141MAX

5,55

251MAX

9,88

EN 14492-1 EN 14492-1

NOTE: Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.

NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.Wire rope minimum breaking load must be at least double of winch max. pulling capacity.Max.wire rope capacity according with EN 14492-1.

HYDRAULIC PLANETARY GEAR WINCHES

Dimensions are :Inch

MillimetersDimensions are :

Inch

Millimeters

** Max wire rope capacity corresponding to the full drum condition.

LINE PULL 1st LAYER

GEAR RATIO

WORKING PRESSURE

LINE SPEED 1st LAYER

WIRE ROPE SIZE

WIRE ROPECAPACITY

MAX. WIRE ROPE CAPACITY EN 14492-1

MAX. WIRE ROPE CAPACITY ** DESCRIPTION WEIGHT

LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 105,60 lbs 47,9 kgs

10.000 4.500 5,3:1 2,176 150 38,4 11,7 - 11 91,9 28 131,2 40 177,2 54 ACCESSORY : ROLLER FAIRLEAD 21,61 lbs 9,8 kgs

- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 4,41 lbs 2,0 kgs

Hydraulic Motor.................................................................................................................(19,2 cu in)...315 cc Max. oil flow............................................................................................................(15,85 GPM)...60 Lt./Min.Mir clutch working pressure ........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar

DIMENSIONAL DATA

TECHNICAL DATA

4The Quality is Transparent

EPH FN winches are equipped with manual clutch shifter.Clutch allows the operator to manually disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling).Engaging the clutch, it locks the winch drum back onto the gear train.Air clutch shifter is considered such an optional accessory.

MANUAL CLUTCH VERSION

DANGEROUSDo not use winch to lift support or transport personnel.

1776,96

32,21,27

2128,35

2529,92

29211,50

351,38

522,05

40315,87

2208,66

68927,12

250,98

340,513,41

E(Y) 361,43

10 E(X)0,39

1967,721104,33

301,18

301,1812,60,50

2349,21

1024,02

355,514,00

1315,16

210,83

562,20

1104,33

233,59,19

401,57

200,79

M12

133MAX

5,24

243MAX

9,57

DIMENSIONAL DATA

On request at the order, EPH FN winches can be equipped with Air clutch shifter. An air cylinder allows to pneumatically disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.

AIR CLUTCH VERSION

1776,96

32,71,29

2128,35

2529,92

29311,52

351,38

522,05

403,515,89

2309,05

69927,53

E(X) 110,43

34113,43

250,98

1967,721104,33

301,18

301,1812,60,50

2369,29

1024,02

355,514,00

1315,16

210,83

562,20

1104,33

233,59,19

401,57

251MAX

9,88141MAX

5,55

M12

200,79

EN 14492-1 EN 14492-1

NOTE: Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.

NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.Wire rope minimum breaking load must be at least double of winch max. pulling capacity.Max.wire rope capacity according with EN 14492-1.

HYDRAULIC PLANETARY GEAR WINCHES

Dimensions are :Inch

MillimetersDimensions are :

Inch

Millimeters

** Max wire rope capacity corresponding to the full drum condition.

LINE PULL 1st LAYER

GEAR RATIO

WORKING PRESSURE

LINE SPEED 1st LAYER

WIRE ROPE SIZE

WIRE ROPECAPACITY

MAX. WIRE ROPE CAPACITY EN 14492-1

MAX. WIRE ROPE CAPACITY ** DESCRIPTION WEIGHT

LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 115,30 lbs 52,3 kgs

11.460 5.200 5,3:1 1,885 130 28,2 8,6 7/16 11 98,4 30 177,2 54 226,4 69 ACCESSORY : ROLLER FAIRLEAD 22,71 lbs 10,3 kgs

- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 4,41 lbs 2,0 kgs

Hydraulic Motor.................................................................................................................(24,4 cu in)...400 cc Max. oil flow............................................................................................................(15,85 GPM)...60 Lt./Min.Mir clutch working pressure ........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar

DIMENSIONAL DATA

TECHNICAL DATA

5The Quality is Transparent

EPH FN winches are equipped with manual clutch shifter.Clutch allows the operator to manually disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling).Engaging the clutch, it locks the winch drum back onto the gear train.Air clutch shifter is considered such an optional accessory.

MANUAL CLUTCH VERSION

DANGEROUSDo not use winch to lift support or transport personnel.

36114,22

2068,11

80,31

250,509,86

1024,02

1465,75

2409,45

602,36

1194,69

180,71

401,57

301,18

1104,33

301,18

200,79

M12

1887,40

2288,96

2529,92

70027,56

42316,65

542,13

522,05

250,98

250,98

34313,50

28511,20

331,28

36 E(Y)1,42

10 E(X)0,39

151MAX

5,94

270MAX

10,63

DIMENSIONAL DATA

On request at the order, EPH FN winches can be equipped with Air clutch shifter. An air cylinder allows to pneumatically disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.

AIR CLUTCH VERSION

36114,22

2068,11

80,31

250,509,86

1024,02

2409,45

602,36

1194,69

180,71

1465,75

401,57

301,18

1104,33

301,18

M12

200,79

1887,40

2288,96

2529,92

70027,56

42316,65

542,13

522,05

E(X) 110,43

250,98

250,98

34313,50

28511,20

331,28

2359,25

151MAX

5,94

270MAX

10,62

EN 14492-1 EN 14492-1

NOTE: Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.

NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.Wire rope minimum breaking load must be at least double of winch max. pulling capacity.Max.wire rope capacity according with EN 14492-1.

HYDRAULIC PLANETARY GEAR WINCHES

Dimensions are :Inch

MillimetersDimensions are :

Inch

Millimeters

** Max wire rope capacity corresponding to the full drum condition.

LINE PULL 1st LAYER

GEAR RATIO

WORKING PRESSURE

LINE SPEED 1st LAYER

WIRE ROPE SIZE

WIRE ROPECAPACITY

MAX. WIRE ROPE CAPACITY EN 14492-1

MAX. WIRE ROPE CAPACITY ** DESCRIPTION WEIGHT

LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 127,65 lbs 57,9 kgs

13.650 6.200 5,3:1 2,248 155 30,2 9,2 - 12 98,4 30 128,0 39 170,6 52 ACCESSORY : ROLLER FAIRLEAD 22,71 lbs 10,3 kgs

- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 4,41 lbs 2,0 kgs

Hydraulic Motor.................................................................................................................(19,2 cu in)...315 cc Max. oil flow............................................................................................................(15,85 GPM)...60 Lt./Min.Mir clutch working pressure ........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar

DIMENSIONAL DATA

TECHNICAL DATA

6The Quality is Transparent

EPH FN winches are equipped with manual clutch shifter.Clutch allows the operator to manually disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling).Engaging the clutch, it locks the winch drum back onto the gear train.Air clutch shifter is considered such an optional accessory.

MANUAL CLUTCH VERSION

DANGEROUSDo not use winch to lift support or transport personnel.

36114,22

2068,11

80,31

250,509,86

1024,02

1465,75

2409,45

1194,69

602,36 18

0,71

401,57

301,18

1104,33

301,18

2037,99

2288,96

2529,92

71528,14

42316,65

542,13

522,05

250,98

250,98

34313,50

28511,20

331,28

36 E(Y)1,42

2359,25

10 E(X)0,39

151MAX

5,94

270MAX

10,63

M12

200,79

DIMENSIONAL DATA

On request at the order, EPH FN winches can be equipped with Air clutch shifter. An air cylinder allows to pneumatically disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.

AIR CLUTCH VERSION

36114,22

2068,11

80,31

250,509,86

1024,02

1465,75

2409,45

1194,69

602,36 18

0,71

401,57

301,18

1104,33

301,18

M12

200,79

2037,99

2288,96

2529,92

71528,14

42316,65

542,13

522,05

E(X) 110,43

250,98

250,98

34313,50

28511,20

331,28

2359,25

151MAX

5,96

270MAX

10,64

EN 14492-1 EN 14492-1

NOTE: Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.

NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.Wire rope minimum breaking load must be at least double of winch max. pulling capacity.Max.wire rope capacity according with EN 14492-1.

HYDRAULIC PLANETARY GEAR WINCHES

Dimensions are :Inch

MillimetersDimensions are :

Inch

Millimeters

** Max wire rope capacity corresponding to the full drum condition.

LINE PULL 1st LAYER

GEAR RATIO

WORKING PRESSURE

LINE SPEED 1st LAYER

WIRE ROPE SIZE

WIRE ROPECAPACITY

MAX. WIRE ROPE CAPACITY EN 14492-1

MAX. WIRE ROPE CAPACITY ** DESCRIPTION WEIGHT

LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 127,65 lbs 57,9 kgs

14.770 6.700 5,3:1 2,393 165 30,2 9,2 - 12 98,4 30 128,0 39 170,6 52 ACCESSORY : ROLLER FAIRLEAD 22,71 lbs 10,3 kgs

- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 4,41 lbs 2,0 kgs

Hydraulic Motor.................................................................................................................(19,2 cu in)...315 cc Max. oil flow............................................................................................................(15,85 GPM)...60 Lt./Min.Mir clutch working pressure ........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar

DIMENSIONAL DATA

TECHNICAL DATA

7The Quality is Transparent

EPH FN winches are equipped with manual clutch shifter.Clutch allows the operator to manually disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling).Engaging the clutch, it locks the winch drum back onto the gear train.Air clutch shifter is considered such an optional accessory.

MANUAL CLUTCH VERSION

DANGEROUSDo not use winch to lift support or transport personnel.

36114,22

2068,11

80,31

250,509,86

1024,02

1465,75

2409,45

1194,69

602,36 18

0,71

401,57

301,18

1104,33

301,18

2037,99

2288,96

2529,92

71528,14

42316,65

542,13

522,05

250,98

250,98

34313,50

28511,20

331,28

36 E(Y)1,42

2359,25

10 E(X)0,39

151MAX

5,94

270MAX

10,63

M12

200,79

DIMENSIONAL DATA

On request at the order, EPH FN winches can be equipped with Air clutch shifter. An air cylinder allows to pneumatically disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.

AIR CLUTCH VERSION

36114,22

2068,11

80,31

250,509,86

1024,02

1465,75

2409,45

1194,69

602,36 18

0,71

401,57

301,18

1104,33

301,18

M12

200,79

2037,99

2288,96

2529,92

71528,14

42316,65

542,13

522,05

E(X) 110,43

250,98

250,98

34313,50

28511,20

331,28

2359,25

151MAX

5,96

270MAX

10,64

EN 14492-1 EN 14492-1

NOTE: Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.

NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.Wire rope minimum breaking load must be at least double of winch max. pulling capacity.Max.wire rope capacity according with EN 14492-1.

HYDRAULIC PLANETARY GEAR WINCHES

Dimensions are :Inch

MillimetersDimensions are :

Inch

Millimeters

** Max wire rope capacity corresponding to the full drum condition.