1

HYDRAULIC EXCAVATORSCX210B

2

HYDRAULIC EXCAVATORSCX210B

Maximum Efficiency HydraulicsThree working modes tailor the machine to every application. Advanced Auto mode and Super Power mode offer increased digging forces, greater swing speeds and higher swing torque, resulting in faster cycle times and increased productivity. Fuel efficient Tier III common rail engine combined with high efficiency hydraulic system results in up to 20 % fuel saving.Reduced operating costs. Increased productivity.

Designed To PerformStrong, rugged looks of new cab and upper structure contribute to increased operator satisfaction. New Tier III engine uses technology from much larger machines, to increase performance while reducing running costs. Advanced control system makes the CX210B easier to drive, reducing fatigue and boosting production, while exhaust gas recirculation and advanced common rail injection lower emissions, reducing the impact on the environment. Cleaner emissions. Tough performance.

Built To WorkCase durability throughout, with redesigned upper structure and new boom and dipper design with forged brackets. EMS bushes increase durability and reduce servicing costs, keeping the machine working in the most arduous conditions. High performance hydraulic filter increases component life and extends maintenance schedules. Minimal downtime. Maximum productivity.

Lower Operating CostsA 20 % larger fuel tank, combined with lower fuel consumption, results in two day work period between refills. Standard high flow electric refuelling pump with auto stop feature twice as fast as current model. Extended Maintenance System bushes offer 1,000 hour greasing intervals on all pins but the bucket. Side by side coolers easy to maintain and ground access centralised filter bank reduces service time. Reduced running costs. Increased profitability.

3

Operator ComfortNew cab structure and layout offers more leg and foot space for operator, while more glass contributes to airy feeling in the cab. Fully reclining seat allows any operator to remain comfortable throughout the day and increased storage, including hot/cold box, improves working space. Smooth servo levers with intuitive control reduce fatigue, while advanced throttle control and mode selector makes operation easier. Low fatigue environment. Increased performance.

Safe And SecureCab profile three times stronger than previous model, despite slimmer pillars and increased glass area, which contributes to improved visibility to the front and sides of the machine. Simple working mode console offers smooth, progressive control of the machine whatever the operation.Clearer vision. Safer working environment.

4

HYDRAULIC EXCAVATORSCX210B

EngineProven four cylinder common rail engine exceeds Tier 3 emissions standards. Ladder frame construction, with similar weight to a six cylinder engine, results in tough build with extended durability for all components. Low engine speed contributes to 5% lower noise output and 20% improvement in fuel consumption. Large capacity exhaust muffler and low rev, large diameter, engine cooling fan further cut engine noise. Fuel cooler contributes in engine fuel consumption improvement, while four valve per cylinder overhead camshaft design and exhaust gas recirculation (EGR) reduce gaseous emissions. Future-proof advanced engine design means that Case is already well equipped to meet Euro IV emissions standards.

HydraulicsThe CX210B offers further advances in hydraulic design, using efficient piston type pumps to maximise pressure and flow. The machine uses a variable control pump torque system that matches engine output to hydraulic demand, reacting rapidly to operator movement to ensure high productivity. A high performance Super Fine synthetic fibre hydraulic filter is used to offer a high contamination catch, protecting components and ensuring long service life. There is now no need for an additional filter when the machine is used with a hydraulic breaker. New hose burst control valves are now mounted behind the main lift cylinders, for improved protection.

Console, Engine ThrottleCentralised layout of switches is easy to use. Fully adjustable right hand console includes advanced engine throttle control, that determines working mode selection. The console is equipped with a luminosity sensor to ensure that the graphics are clear and easily readable in bright sunlight. Short lever joysticks further improve controllability for the operator. Up to 10 auxiliary hydraulic flow settings are programmed into the memory, allowing up to 10 attachments to be used with no manual adjustment to hydraulic circuit. The operator can change from breaker to shear setting from within the cab.

5

Operator’s CabNew cab has thinner pillars and 60% more glass, including one piece window on right hand side, for improved visibility all round. The main windscreen has a retractable sun visor and can be lifted fully into the roof space if required. The cab structure is 30% stronger, which with improved cab mounts results in lower noise and vibration for the operator. Longer seat slides, a fully reclining seat and foot space, and standard air conditioning with numerous outlet vents ensure that any operator can stay comfortable throughout the working day. A clock is included while storage is improved, with a large box behind the driver’s seat, bottle and can holders and a cool/hot box that uses the air conditioning system to regulate internal temperature.

6

HYDRAULIC EXCAVATORSCX210B

MaintenanceCentralised filters can be changed from ground level, reducing service time and improving uptime. Fuel tank has drain cock and removable maintenance plate, for cleaning in territories with lower grade fuels. Engine oil drainer helps reduce environmental impact as their is no spillage. All electrics are centralised in the cab, behind the seat, to maintain cleanliness and reduce ingress of dirt. High flow refuelling pump, has auto stop function to make refilling easier.

UndercarriageCase undercarriage design continues to ensure long component life and low operating costs. Drive sprockets are heat treated for extended operation. The machine has robust track guides and improved track links, with new M shaped seals and increased pin hardness, for maximum durability and reliability. The track rollers use a revised design for less wear, and the O-ring design prevents the ingress of abrasive material, enhancing the Case reputation for class leading longevity.

Improved Pin and Bushing LifeExtended Maintenance Bushings (EMS) now fitted as standard on all CXB machines. EMS bushings provide 1,000 hour greasing intervals, greatly reducing daily and weekly maintenance for the operator, though bucket link pins retain 250 hour greasing interval. Anti-friction shims at boom foot and head reduce friction and noise in operation, while cutting free plat, increasing durability and reducing cost for the customer.

EMS chrome plated pins with brass bushing

Antifriction shims

7

Attachments/BucketsCX210B customers can choose from a variety of main booms and dipper arms to suit different applications, all of which are constructed of heavy duty steel box section with internal baffles to increase torsional rigidity. Deep groove welding ensures that the booms and arms can withstand the stress of high breakout forces, heavy lifting and attachments such as hydraulic breakers, compactors, demolition shears and crushers.With a different choice of booms and dipper sticks, along with a range of buckets from 0.25m3 - 1.25 m3, there is a configuration to meet the requirements of every customer’s job site.

8

HYDRAULIC EXCAVATORSCX210B

9

GPGPHDGPGPGP

EngineLatest generation engine, meeting European requirementsfor “Low exhaust emissions” Tier III in accordance with directive97/68/ECMake _________________________________________ ISUZUType _______________________________________ AI-4HK1XCommon rail, turbo, intercooler, fuel cooler, EGR (Exhaust GasRecirculator) ______________________________________ YesDirect injection _____________________ Electronically controlledNumber of cylinders _________________________________ 4Bore - Stroke ____________________________ 115 x 125 mmCubic capacity ________________________________ 5193 ccNET Horsepower EEC80/1269 ____________ 117 kW @ 1800 rpmMaximum Torque ____________________ 628 Nm @ 1500 rpm

Hydraulic SystemMax output ______________________ 2 x 211 l/min @ 1800rpm2 axial piston, variable flow pumps _____________________ YesAttachment/Power Boost ______________________ 343/368 barUpperstructure swing ___________________________ 294 barTravel _______________________________________ 343 barOil filtration ___________________________________ 6 micronType of oil filter ___________ Synthetic fiber super fine High catch

SwingMax upperstructure swing speed __________________ 11.5 rpmSwing torque ________________________________ 6400 daN

TravelThe travel circuit is equipped with axial piston, variable flow motors

Max travel speed _____________________________ 5.6 km/hLow travel speed _____________________________ 3.4 km/hSpeed change is controlled from the instrument panelAutomatic downshifting ______________________________ yesGradeability _________________________________ 70% (35)Tractive ____________________________________ 1892 daN

Electrical SystemCircuit _________________________________________ 24 VBatteries ______________________________ 2 x 12 V - 92 A/hCircuit equipped with water-proof connectors ______________ YesAlternator _______________________________ 24 V - 50 Amp

UndercarriageUpper rollers _______________________________________ 2Lower rollers LC/STD _______________________________ 8/7 Number of track pads LC/STD _______________________ 49/46Type of shoes _____________________________ Triple grouserTrack pad width Standard LC/STD ___________ 600 mm/600 mmTrack guard __________________________ Front and 1 central

Circuit And Component CapacitiesFuel tank ______________________________________ 410 lHydraulic reservoir _______________________________ 147 lHydraulic system ________________________________ 240 lTravel reduction gear (per side) ________________________ 5 lSwing reduction gear _______________________________ 5 lEngine (including filter change) ______________________ 23.1 lEngine cooling system ____________________________ 25.6 l

Specifications

Bucket Capacity (m3) Width (mm) Weight (kg) Number of teeth Combination1.9 m armwith side

cutter(ISO/SEA/heaped) without side cutter

2.4 m arm 2.9 m armSTD LCSTD LCSTD LC

Buckets

0.5 830 730 514 4 0.8 1130 1030 645 5 0.8 1136 1036 726 5 0.9 1230 1130 684 5 1.0 1360 1260 737 6 1.1 1460 1360 771 6

Suitable for materials with density up to 2000 kg/m3 or lessStandard bucket (Suitable for materials with density up to 1800 kg/m3 or lessSuitable for materials with density up to 1,600kg/m3 or less)Suitable for materials with density up to 1,200kg/m3 or less)GP General Purpose BucketHD Heavy Duty Bucket

10

ABCDEFGHIJKL

N

General dimensions

CX210B LC MONO CX210B STD MONO

Overall height (with attachment) mHeight (cab/handrail) mOverall lenght (with attachment) mOverall lenght (without attachment) mWidth of upperstructure mUpperstructure ground clearance mSwing radius (rear end) mTrack overall lenght mCentre idler to centre sprocket mTrack gauge mTrack shoe width standard mmTrack overall width - 600mm shoes m - 700mm shoes m - 800mm shoes mGround clearance m

DIPPER LENGTH 1.90 m 2.40 m 2.94 m 1.90 m 2.40 m 2.94 m

Weight and ground pressureWith 5.70 m standard monoboom 2.40 m dipper 698 kg, 1m3 bucket operator and full fuel tank

Weight (kg) Ground pressure (bar) LC STD LC STD

shoes 600mm steelshoes 700mm steelshoes 800mm steel

HYDRAULIC EXCAVATORSCX210B

20900 20300 0.43 0.45 21400 20700 0.38 0.40 21700 21000 0.34 0.36

3.09 3.19 2.97 3.20 3.09 2.97 2.94/2.96 2.94/2.96 2.94/2.96 2.94/2.96 2.94/2.96 2.94/2.96 9.49 9.48 9.40 9.49 9.48 9.40 4.96 4.96 4.96 4.81 4.81 4.81 2.77 2.77 2.77 2.77 2.77 2.77 1.04 1.04 1.04 1.04 1.04 1.04 2.72 2.72 2.72 2.72 2.72 2.72 4.47 4.47 4.47 4.18 4.18 4.18 3.66 3.66 3.66 3.37 3.37 3.37 2.39 2.39 2.39 2.20 2.20 2.20 600 600 600 600 600 600 2.99 2.99 2.99 2.79 2.79 2.79 3.09 3.09 3.09 2.89 2.89 2.89 3.19 3.19 3.19 2.99 2.99 2.99 0.46 0.46 0.46 0.46 0.46 0.46

11

ABCDEFGH

8.96 9.42 9.90 8.77 9.24 9.73 5.61 6.10 6.65 5.37 5.90 6.47 6.36 6.62 6.84 9.19 9.44 9.64 3.58 3.60 3.60 5.01 5.50 5.96 14 200 12 300 10 300 15 200 13 200 11 000 14 200 14 200 14 200 15 200 15 200 15 200

Maximum digging reach mMaximum digging reach at ground level mMaximum digging depth mDigging depth - 2.44 m level bottom mMax dump height mOverall reach height mMinimum swing radius - attachment mVertical straight wall dig depth mDigging force - w/o Power Boost daN - with Power Boost daNBreakout force - w/o Power Boost daN - with Power Boost daN

DIPPER LENGTH 1.90 m 2.40 m 2.94 m

Performance Datawith 5.70 m Standard Monoboom - 2.40 m Dipper

12

Lifting capacity with 5.70 m Standard Monoboom

Machine in Auto mode - Lift capacities are taken in accordance with SAE J1097/ISO 10567/DIN 15019-2 - Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity Capacities that are marked with an asterisk (*) are hydraulic limited. If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the table to calculate the real lift capacity

m

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

360°

Front

REACHAt max reach

2990 * 2900 2210 * 2210 * 3850 * 2890 2100 * 2090 4710 * 4160 4280 2780 3100 1910 2090 * 1780 10000 * 10000 * 7500 * 6250 5780 * 3900 4200 2640 3030 1850 2160 * 1620 9260 * 9260 * 9210 5650 5830 3610 4330 2490 2950 1770 2300 * 1570 8360 * 8360 * 8910 5230 5570 3380 3900 2360 2890 1710 2540 * 1620 6970 * 6970 * 10510 * 9650 * 8730 5080 5430 3250 3820 2290 2950 * 1780 9540 * 9540 * 14220 * 10240 8780 5150 5450 3290 3890 2350 3520 2110 13420 * 13420 * 13370 * 10540 8880 5360 5620 3520 4570 2780 6280 * 5460 5950 * 5160

7.76 8.71 9.289.549.539.28 8.77 7.95 6.79 4.66

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage STD - 2.94 m arm length, 600mm shoes and bucket of 0.80 m3 / 650 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

2990 * 2980 2210 * 2210 * 3850 * 2960 2100 * 2100 * 4710 * 4270 4370 * 2860 3160 * 1970 2090 * 1840 10000 * 10000 * 7500 * 6400 * 5780 * 4000 4320 2710 3130 1910 2160 * 1680 9260 * 9260 * 9300 * 5790 5990 3710 4160 2570 3050 1830 2300 * 1630 8360 * 8360 * 9160 5380 5740 3480 4020 2440 2990 1770 2540 * 1680 6970 * 6970 * 10510 * 9900 8980 5230 5590 3350 3940 2360 2950 * 1840 9540 * 9540 * 14220 * 10500 9030 5300 5620 3390 4010 2430 3630 2180 13420 * 13420 * 13370 * 10810 9080 * 5500 5770 3630 4720 2970 6280 * 5610 5950 * 5300

7.768.719.289.549.539.288.777.956.794.66

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage STD - 2.94 m arm length, 800mm shoes and bucket of 0.80 m3 / 650 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

3440 * 3440 * 3310 * 3220 4580 * 4310 4280 * 2890 3150 * 2420 6270 * 6270 * 5180 * 4150 4410 2800 3130 * 2040 8120 * 6150 6100 * 3880 4260 2660 3990 1880 3060 1850 9390 5600 5890 3620 4110 2520 3030 1810 3000 1800 7390 * 7390 * 9050 5280 5680 3430 3990 2420 3120 1860 7960 * 7960 * 10980 * 9970 9000 5260 5600 3370 3970 2390 3450 2080 11100 * 11100 * 14440 * 10650 9110 5370 5680 3460 4170 2540 11870 * 10850 8320 * 5660 5400 * 3600

7.18.148.769.059.058.788.237.335.96

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage STD - 2.40 m arm length, 800mm shoes and bucket of 0.90 m3 / 650 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

3440 * 3440 * 3310 * 3130 4580 * 4230 4280 * 2810 3150 * 2350 6270 * 6270 * 5180 * 4050 4280 2720 3130 * 1970 8220 * 6000 5970 3780 4130 2580 3000 1810 2960 1790 9170 5450 5720 3520 3980 2440 2940 1760 2900 1730 7390 * 7390 * 8800 5140 5510 3330 3870 2340 3020 1800 7960 * 7960 * 10980 * 2720 8740 5110 5440 3270 3850 2320 3340 2010 11100 * 11100 * 14440 * 10390 8860 5220 5220 3350 4040 2460 11870 * 10610 8320 * 5510 5400 * 3500

7.18.148.769.059.058.788.237.335.96

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage STD - 2.40 m arm length, 600mm shoes and bucket of 0.90 m3 / 650 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

4590 * 4240 4040 * 3660 4870 * 4170 4300 2730 3830 * 2640 6940 * 6370 5600 * 3970 4230 2670 3520 2180 8480 * 5850 5940 3720 4100 2550 3220 1970 9050 5360 5680 3490 3970 2430 3170 1910 8780 5130 5510 3330 3880 2350 3310 2000 11660 * 9880 8810 5170 5470 3310 3900 2370 3730 2260 13540 * 10610 8940 5320 5610 3450 4650 2850 10450 * 10450 * 7380 * 5540 5700 * 4340

6.477.628.288.598.598.317.726.755.25

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage STD - 1.91 m arm length, 600mm shoes and bucket of 1.00 m3 / 700 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

13

Lifting capacity with 5.70 m Standard Monoboom

Machine in Auto mode - Lift capacities are taken in accordance with SAE J1097/ISO 10567/DIN 15019-2 - Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity Capacities that are marked with an asterisk (*) are hydraulic limited. If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the table to calculate the real lift capacity

m

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

360°

Front

REACHAt max reach

2910 * 2910 * 2220 * 2220 * 3860 * 3200 2110 * 2110 * 4670 * 4550 4410 * 3090 3120 * 2160 2090 * 2020 10330 * 10330 * 7540 * 6850 5770 * 4300 4750 * 2940 3470 2090 2160 * 1850 8460 * 8460 * 9370 * 6300 6600 4020 4600 2780 3390 2010 2300 * 1800 8200 * 8200 * 10320 5890 6390 3790 4460 2660 3330 1950 2540 * 1850 7390 * 7390 * 10610 * 10610 * 10210 5760 6260 3670 4390 2590 2950 * 2030 9810 * 9810 * 14560 * 11740 10170 5820 6290 3710 4460 2660 3710 * 2420 13790 * 13790 * 13160 * 11990 9070 * 6030 6350 3940 5230 * 3240

7.738.699.269.539.539.288.767.926.67

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage LC - 2.94 m arm length, 600mm shoes and bucket of 0.90 m3 / 650 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

2910 * 2910 * 2220 * 2220 * 3860 * 3320 2110 * 2110 * 4670 * 4660 4410 * 3210 3120 * 2250 2090 * 2090 * 10330 * 10330 * 7540 * 7030 5770 * 4450 4840 * 3050 3610 2180 2160 * 1930 8460 * 8460 * 9370 * 6520 6730 * 4170 4780 2900 3530 2100 2300 * 1880 8200 * 8200 * 10350 * 6110 6640 3940 4640 2770 3470 2040 2540 * 1940 7390 * 7390 * 10610 * 10610 * 10500 * 5980 6500 3830 4570 2710 2950 * 2130 9810 * 9810 * 14560 * 12160 10210 * 6040 6530 3860 4640 2770 3710 * 2520 13790 * 13790 * 13160 * 12340 9070 * 6250 6490 * 4080 5230 * 3370

7.738.699.269.539.539.288.767.926.67

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage LC - 2.94 m arm length, 800mm shoes and bucket of 0.90 m3 / 650 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

3420 * 3420 * 3280 * 3280 * 4550 * 4540 4240 * 3090 3110 * 2600 6230 * 6230 * 5140 * 4460 4730 * 3000 3090 * 2190 8090 * 6670 6130 * 4180 4680 2860 3400 2020 3180 * 1990 9630 * 6110 6540 3920 4530 2720 3340 1960 3300 1940 7350 * 7350 * 10260 5780 6320 3720 4410 2610 3430 2010 7920 * 7920 * 10930 * 10930 * 10200 5750 6240 3660 4390 2590 3810 2240 11060 * 11060 * 14400 * 11890 9900 * 5860 6320 3740 4610 2740 11830 * 11820 * 8290 * 6150 5360 * 3900

7.18.148.769.059.058.788.237.335.96

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage LC - 2.40 m arm length, 600mm shoes and bucket of 1.00 m3 / 700 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

3420 * 3420 * 3280 * 3280 * 4550 * 4550 * 4240 * 3210 3110 * 2700 6230 * 6230 * 5140 * 4610 4730 * 3110 3090 * 2280 8090 * 6890 6130 * 4330 4860 2970 3520 * 2110 3180 * 2080 9630 * 6330 6760 4070 4710 2830 3480 2060 3370 * 2030 7350 * 7350 * 10480 * 6000 6560 3880 4590 2730 3580 2110 7920 * 7920 * 10930 * 10930 * 10440 * 5970 6480 3810 4570 2700 3970 2350 11060 * 11060 * 14400 * 12300 9900 * 6080 6560 3890 4800 2860 11830 * 11830 * 8290 * 6370 5360 * 4050

7.18.148.769.059.058.788.237.335.96

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage LC - 2.40 m arm length, 800mm shoes and bucket of 1.00 m3 / 700 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

4530 * 4530 * 3970 * 3940 4750 * 4560 4550 * 2920 3760 * 2870 6860 * 6860 * 5560 * 4370 4750 2920 3740 * 2380 8300 * 6530 6440 * 4120 4630 2810 3630 2160 9730 * 6010 6500 3880 4500 2690 3580 2110 7070 * 7070 * 10230 5760 6300 3710 4410 2610 3750 2210 7680 * 7680 * 11330 * 11200 10220 5790 6250 3670 4430 2620 4210 2490 12110 * 12110 * 13680 * 12030 9610 * 5930 6370 3820 5190 3090 10710 * 10710 * 7560 * 6180 5590 * 4590

6.517.648.298.598.59

8.37.736.815.41

7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m-4.5 m-6.0 m

Undercarriage LC - 1.91 m arm length, 600mm shoes and bucket of 1.10 m3 / 780 kg7,5 m6,0 m4,5 m3,0 m1,5 m

0 m-1,5 m-3,0 m-4,5 m-6,0 m

14

ABCDEFGHIJKL

N

General dimensionswith 8.70 m Long Reach Boom - 6.40 m Dipper

3.002.94/2.96

12.474.962.771.042.724.473.662.39800

-2.993.093.190.46

CX210B LR

Overall height (with attachment) mHeight (cab/handrail) mOverall lenght (with attachment) mOverall lenght (without attachment) mWidth of upperstructure mUpperstructure ground clearance mSwing radius (rear end) mTrack overall lenght mCentre idler to centre sprocket mTrack gauge mTrack shoe width standard mmTrack overall width - 500mm shoes m - 600mm shoes m - 700mm shoes m - 800mm shoes mGround clearance m

DIPPER LENGTH 6.40 m

Weight and ground pressureWith 8.70 m long reach boom 6.40 m dipper 330 kg, 0.37m3 bucket operator and full fuel tank

Weight (kg) Ground pressure (bar)

shoes 600mm steelshoes 800mm steel

m3

mm (with side cutter)

General Purpose

Buckets

SAE capacityWidth

0.37 772

21400 0.45 23000 0.36

HYDRAULIC EXCAVATORSCX210B

15

m360°

1039* 1039*

1456* 1456* 994* 994*

1796* 1752 978* 978*

1901* 1901* 1879* 1687 1317* 1257 983* 983*

2236* 2236* 2101* 2101* 2008* 1599 1798* 1257 1009* 1009*

2973* 2973* 2591* 2591* 2340* 1961 2170* 1497 1989 1141 1056* 974

3064* 3064* 6482* 6482* 4533* 4400 3546* 3160 2968* 2362 2596* 1804 2346* 1391 1918 1073 1128* 917

2508* 2508* 5950* 5763 5336* 3894 4073* 2840 3326* 2149 2834 1659 2274 1293 1852 1009 1229* 889

2880* 2880* 5167* 5167* 5914* 3559 4487 2599 3424 1979 2707 1540 2188 1211 1799 959 1371* 889

3482* 3482* 5366* 5154 6040 3372 4316 2444 3297 1861 2616 1454 2128 1154 1690* 930 1573* 923

4199* 4199* 5974* 5125 5955 3298 4231 2366 3227 1796 2566 1407 2101 1128 1871* 999

5016* 5016* 6860* 5198 5968 3309 4219 2356 3213 1783 2562 1404 2118 1144 2104 1136

5943* 5943* 7968* 5358 5993* 3394 4278 2409 3260 1827 2616 1454 2477 1375

6998* 6998* 7063* 5612 5387* 3558 4251* 2533 3379* 1942 3149* 1821

5607* 5607* 4303* 3830 3398* 2855

ABCDEFGH

Performance Datawith 8.70 m Long Reach Boom - 6.40 m Dipper

15.60 15.49 12.01 11.82 10.73 12.97 5.19 10.29 4600 6500

Maximum digging reach mMaximum digging reach at ground level mMaximum digging depth mDigging depth - 2.44 m level bottom mMax dump height mOverall reach height mMinimum swing radius - attachment mVertical straight wall dig depth mDigging force daNBreakout force daN

DIPPER LENGTH 6.40 m

REACHFront

LR with 6.40 m dipper, 800 mm shoes and bucket of 0.37 m3 - 338 kg

Lifting capacity with 8.70 m Long Reach Boom

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m At maxreach

11.4512.4613.2113.7614.1414.3414.3914.27

14.013.5512.9112.0610.93

9.437.34

10.5 m9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m -3.0 m -4.5 m-6.0 m-7.5 m-9.0 m

-10.5 m

www.casece.com

Standard Equipment CX210B

Optional Equipment CX210B Bucket/clamshell hydraulic circuit Hammer hydraulic circuit Hammer/shear hydraulic circuit Additional track guides (3 guides & front) Track width (600mm - 700mm - 800mm depending on the version) Windscreen protection Cab protection Electrical refuel pump with automatic stop

Hydraulic safety valves on boom and dipper Rain deflector 2 working light on the cab Fully adjustable low frequency air suspension seat including double acting hydraulic damper Fo

rm N

o. S

EA43

01CC

GB -

Med

iaCr

oss

Fire

nze

- 12

/14

CASE provides specific outfits for various countries and many optional fittings (OPT). The illustrations on this or other leaflets may relate to standard or optional fittings. Please consult your CASE dealer for any information in this regard and any possible updating on components. CNH Industrial reserves the right to modify machine specifications without incurring any obligation relating to such changes.

Conforms to directive 2006/42/CE

ENGINE CONTROL Common rail engine Tier III European Standards Electronic control of the injection system Automatic engine pre-heating Automatic/manual engine return to idle Emergency stop Fuel filter with water separatorHYDRAULIC CONTROL Auto/Heavy/Super Power working modes Pump torque variable control Automatic Power boost control Swing brake control High performance “Super Fine” synthetic fiber hydraulic filter(high contamination catch) 2 travel speeds with auto down shiftingOPERATOR ENVIRONMENT High visibilty cab with safety glass Adjustable et retractable armrest console with position memory Safety lever Self adjusting Air conditioning and heating system Cup holder High visibility side monitor display with automatic brightness Messages (function, temperature, safety, ...) on the display Integrated diagnostic system Working modes (Auto/Heavy/Super Power) combined with engine throttle Anti-theft device Hourmeter RH front console with clock and cell phone holder High capacity shock absorbers on cab with 4 points fluid mountings Windscreen with lockable opening Windscreen washer and wiper

Removable lower front windscreen with storage location in cab ISO control pattern low effort & long joysticks Adjustable sun visor Washable cab floor mat Rear view mirror and safety mirrors Storage compartments Integrated cool box Fore & aft adjustment of the whole seat & consoleELECTRICAL SYSTEM Water proof connectors Double horn Working light on the fuel tank Working light on the boomEQUIPMENT EMS (Extended Maintenance System) pins and bushings as Standard(1000 hours lubrication interval for all, except buckets pins at 250 hours) Low friction resin side shims on boom and dipper Sealed and lubricated tracks Track guides (1 guide & front) Large tool box Pre-disposal for the optional cab protectionOPERATOR SEAT Fully adjustable low frequency mechanical seat including double actinghydraulic damper Adjustable head rest Adjustable seat back angle with Fully flat seat reclining Adjustable arm rest Adjustable lombar position Height/fore & aft adjustment Safety belt