Upload
consultor9010
View
213
Download
0
Embed Size (px)
Citation preview
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 1/8
Safe grip for any operation
www.boecker-group.com
Overview hydraulic clamps
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 2/82 www.boecker-group.com
Always a safe grip!
Böcker Hydraulic Clamps are tailor-made clamps for thetransport of all kinds of brick packages. No matter if you
use them on an hydraulic loading crane to load and unloadthe truck, on bridge cranes for the internal transport in fac-tories or even on a fork-lift truck. The comprehensive pro-duct range offers the right clamps for each transport unitand all brick formats respectively.
Clamps for the transport of brick packages
Hydraulic clamps for
the Building Material Industry
Hydraulic clamps for
the Concrete-Block Industry
H G P - 1 2 0 0 / 2 - 0 , 8
5
H G P - 1 2 0 0 / 2 - 1 , 0
5
H G P - 1 2 0 0 / 2 - 1 , 2
5
H G P - 1 2 0 0 / H 2
H G P - 1 5 0 0 / H 2
H G P - 1 5 0 0 / 1
H G P - 1 5 0 0 / 1 . 1
H G P - 1 5 0 0 / 2
H G P - 1 5 0 0 / 2 . 1
H G P - 1 8 0 0 / 1
H G P - 1 8 0 0 / 1 . 1
H G P - 1 8 0 0 / 2
Truck-loadingcrane
Fork-lift truck
Bridge crane
Opening width [m]0.40 –
1.40
0.40 –
1.40
0.40 –
1.40
0.40 –
1.40
0.36 –
1.34
0.45 –
1.10
0.45 –
1.10
0.36 –
1.34
0.36 –
1.34
0.55 –
1.30
0.55 –
1.30
0.36 –
1.34
Grip width [m]0.50 –1.20
0.50 –1.20
0.50 –1.20
0.50 –1.20
0.40 –1.20
0.50 –1.00
0.50 –1.00
0.40 –1.20
0.40 –1.20
0.60 –1.05
0.60 –1.05
0.40 –1.20
Grip height [m] 0.85 1.05 1.251.05 –1.60
1.05 –1.60
0.85 1.00 0.85 1.00 0.85 1.00 0.85
Load-bearing capacity [kg] 2,200 2,000 1,6001,800 –1,300
2,500 –1,500
2,500(1,500)
2,500(1,500)
2,500(1,500)
2,500(1,500)
4,000(1,800)
3,500(1,800)
4,000(1,800)
Dead weight [kg] 255 260 265 300 480 330 380 370 420 430 445 475
Model
Technical Specifications at one glance
Operation on
All rights reserved for changes in dimension and construction.
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 3/8www.boecker-group.com 3
Hydraulic clamps for
the Sand-Lime Brick Industry
Hydraulic clamps for
the Roof-Tile Industry
HGP1800/2.1
H G P - 2 2 0 0 / 1
H G P - 2 2 0 0 / 1 . 1
H G P - 2 2 0 0 / 2
H G P - 2 2 0 0 / 2 . 1
H G 1
H G 1
H G 1 T - 3 2 5 0
H G 1 T - 4 5 0 0
H G 1 T - 6 0 0 0
H G 1 A - 3 0 0 0
D Z 3 - 1 0 0
D Z 3 - 1 1 5
D Z 3 - 2 0 0
D Z 3 - 2 0 0 B i g
6 –
34
0.55 –
1.30
0.55 –
1.30
0.36 –
1.34
0.36 –
1.34
– –0.75 –
1.40
0.75 –
1.40
0.75 –
1.40
0.75 –
1.40
– – – –
0 –20
0.60 –1.05
0.60 –1.05
0.40 –1.20
0.40 –1.20
0.96 0.960.96 –1.00
0.96 –1.00
0.96 –1.00
0.96 –1.00
3 x0.330
3 x0.334
3 x0.330
3 x0.367
00 0.85 1.00 0.85 1.001.01 –1.12
1.01 –1.65
1.20 1.20 1.20 1.20 0.12 0.12 0.12 0.12
500800)
5,000(2,500)
4,500(2,500)
5,000(2,500)
4,500(2,500)
3,000 1,600 3,250 4,500 6,000 3,250 500 600 1,050 1,250
90 650 700 700 750 520 570 760 980 1,250 900 280 300 400 420
All rights reserved for changes in dimension and construction.
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 4/8
Model HGP-1200 / H2
Model HGP-1200/H2
4 www.boecker-group.com
Clamps for the Building Material Industry
Safe, versatile and fast
These clamps have been particularly designed for theuniversal transport of all kinds of block packages of the
building material industry. Depending on the model, theyare available with different load-bearing capacities, withfixed grip height or as adjustable clamps up to 1.60 m.A comprehensive range of accessories such as grip railsor hydraulic continuous rotators is available as well.
Sturdy high-strength steel construction
High capacity
Large opening width due to 2 cylinders
Slender grip arms
Height adjustable
Simple mechanical synchronization
Fast exchangeable grip rails
Integrated control block with pressure relief valve andcheck valve
Grip arms running in heavy duty plastic sliders
Accessories
Grip rails with heavy duty rubber profiles or spring
loaded steel blades in various lengthsDouble grip rails with heavy duty rubber profiles tohandle lightweight blocks or roof tiles
Continuous rotators with various payloads
Suspension for loading crane
Tilting unit on rotator to reduce the height during driving
Changing device for fast and efficient change to otherlifting equipment, e.g. a pallet fork
Continuous rotator with tilting unit: Operation Continuous rotator with tilting unit: Transport
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 5/8
Cushioned steel blades
www.boecker-group.com 5
Clamps for the Concrete-Block Industry
Safe, sturdy and durable
Clamps for the concrete-block industry are equally used onfork-lift trucks, truck loading cranes and bridge cranes.
Concrete-block factories as well as carriers appreciate thetechnical strengths of the clamps for the transport of inter-locking pavers, hollow blocks, curbstones and paving slabs.
Sturdy high-strength steel construction
High capacity, slender grip arms
Large opening width due to 2 cylinders
Fix grip height
Simple mechanical synchronization
Strong grip rails for the safe handling of even heavyblock packs
Integrated control block with pressure relief valve andcheck valve
Grip arms running in heavy duty plastic sliders
Accessories
Grip rails with heavy duty rubber profiles or spring loa-ded steel blades in various lengths
Pendulous double grip rails with spring loaded steellaminaries to handle concrete block packs
Continuous rotators with various payloads
Suspensions for loading crane
Height stop to adjust exact grip height
Spring loaded supporting sheets to squeeze loose pavingblock packs
Traverses for fork-lift trucks with integrated continuousrotators with various payloads and integrated stabiliserto absorb pendulum movements of the clamps in thedirection of travel
Grip arms for fork-lift trucks in twin-spar design forassembly on carrying arms of the fork-lift truck includingintegrated continuous rotators with various payloadsand integrated stabiliser to absorb pendulum move-ments of the clamps in the direction of travel
Carrying arm of fork-lift truck with continuous rotator and stabiliser
Model HGP-1800/2.1 on carrying arm of fork-lift truck
Model HGP-1800/2.1 with connecting piece for fork arms
Model HGP-1800/2.1 on truck-loading crane
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 6/86 www.boecker-group.com
Clamps for the Sand-Lime Brick Industry
Safe, economical and efficient
For the transport of sand lime bricks, various types ofhydraulic clamps are available. Operation on fork-lift
truck, truck loading crane and bridge crane is equallypossible.
All clamps are exactly tailored at the needs of the sandlime brick industry. They all ensure fast and efficienttransport within the factories as well as fast loading oftrucks.
For many years all clamps have been continuously rede-veloped and are well proven on the market. The high-quality design ensures surpassing load-bearing capacityat a minimum dead weight.
Sturdy high-strength steel construction
High capacity
Slender rotating grip arms
Integrated control block with pressure relief valve andcheck valve
Model HG1A-3000 equipped with powerful hydraulicunit for operation on bridge crane
Accessories
Grip rails with cushioned plastic blades or heavy dutyrubber profiles in various lengths
Pendulous double grip rails with cushioned plastic bladesor heavy duty rubber profiles
Cushioned support pawls for safe grip of the brick packsat the bottom area
Accessories for the model HG1T
Carrying arms for fork lift trucks with fixed or hydrauli-cally extendable extensions, with integrated stabiliser
to absorb pendulum movements of the clamps in thedirection of travel, integrated hydraulic continuousrotators
Hydraulic side shifting
Solenoid switching valve in order to control upon re-quest two hydraulic functions with just one controlcircuit of the fork-lift truck
Solenoid locking valves for the blocking of pendulummovements to lift and set down partial packs precisely
Fixing of the carrying arms on the fork arms or directintegration into the lifting structure of the fork-lift
truck
Model HG1A-3000 on bridge crane
Model HG1T on fork-lift truck
Model HG1T-4500 on fork-lift truck
Model HG1 on truck-loading crane Model HG1A-3000 on bridge crane
Model HG1 on truck-loading crane
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 7/8www.boecker-group.com 7
Clamps for the Roof-Tile Industry
Model DZ6-240 on fork-lift truck
Safe grip of roof tiles
The transport of roof-tiles requires specific characteristicsfrom the hydraulic clamps. Böcker has the right model
for all those transport operations.Up to 12 single packages of roof tiles, bandaged or packedin shrink foil, can be lifted by our clamps of the DZ seriesin 3 or 6 rows side by side. The clamps have a maximumgrip length of 2.40 m.
Sturdy steel construction
Careful handling of the tile packs by flexible rubberpaws
Space-saving storage of tile packs thanks to slendergrip rails
Integrated control block with pressure relief valve and
check valve
Accessories
Suspensions for loading crane
Continuous rotators
Changing device for fast and efficient change to otherlifting equipment, e.g. a pallet fork
Carrying arm with integrated continuous rotator andstabiliser for operation on fork-lift truck
Model DZ6-240 on fork-lift truck
Model DZ3-115 on truck-loading crane
Model DZ3-115 on truck-loading crane
7/23/2019 Hydraulic Clamps 07 2010
http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 8/8www.boecker-group.com
Böcker Maschinenwerke GmbH
Lippestraße 69 –73 · D-59368 WerneFon +49(0) 23 89/79 83-0Fax +49(0) 23 89/79 83-9000Mail [email protected] www.boecker-group.com
a d - h o k . c o m
0 6 . 1
0
G B
Böcker Belgium NVBoomsesteenweg 101 · B-2630 AartselaarFon +32 (0) 3/ 45 76 241Fax +32 (0) 3/45 76 242Mail [email protected]
Böcker France SAS
Zac du TEC · F-30320 MarguerittesFon +33 (0)4 6620 9364Fax +33 (0)4 6620 9926Mail [email protected]
Böcker Italia srlVia C. Beccaria 3 · I-37036 San MartinoFon +39 045 / 87 80 399Fax +39 045 / 87 80 420Mail [email protected]
Böcker Nederland B.V.Rolweg 25 · NL-4104 AV CulemborgFon +31 (0) 345/ 51 00 99Fax +31 (0) 345/ 51 08 66Mail [email protected]
Böcker Schweiz AGStriegelstraße 1 · CH-4665 OftringenFon +41(0) 62/797 62 62Fax +41(0) 62/ 797 62 68Mail [email protected]