Hydraulic and NC [PRESS BRAKES

MACHINERY & SPARES

High Quality Accuracy & Reliability PPT series mechanical lever system A simple, efficient and accurate

Crowning Bending the whole sheet length need the parallelism between the table and the ram which also be consistent YSD s machine has built into the table for crowning.

mechanical system by means of a torsion bar ensures the parallelism between beams is used for the synchronism.

Standard: Fixed crowing on table

Option : 1. Adjustable crowing on top tooling clamping

2. Adjustable crowing on table. -manual -CNC control

Bending depth

HPB series mechanic-hydraulic slide valve system A complex, efficient and accurate mechanical- hydraulic slide valve is used for the system, with a good synchro-Accuracy and protection against one-side loading.

Reliable YSD hydraulics The bending accuracy and consistency of the repeatability are achieved by a simple mechanical system of adjustable depth shops including manual (digit readout )and motorized [LED disnay) adjustment.

The hydraulic power which block hydraulics minimaising hoses and some connections are manufactured by YSD, Extremely reliable and precise REXROTH or VICKERS or BOSCH valves are used for the regulating circuit. There is also a low sound lever pump and a large tank with oil level and temperature gauge on oil filter double-acting cylingers ensure high reliability safety and reliability guaranteed!

Gauge fingers and gauge heads The gauge bar on the back gauge option can receive either simple gauge fingers or gauge heads, with vertical adjustment by handwheel, both with micrometrical adjustment.

Back gauge Back gauge with manual adjustment in mechanical readout or with motorized adjustment in LED display and with NC control X-axis in order to position counter.

Tooling YSD press brake tooling is heat -treated throughout before machining for exceptional wear resistance. A wide range of punches and dies for different machine makes as well as tooling are available in standard or For the special requirements of each customer.

Electrical control The electrical control system is a switch cabinet on the left-hand side of the machine. Mainly electical components are in accordance with the DIN or IS0 standard. The machine is fitted with man) Telemechanique components which have overload protection reliability and the service are easily obtainablt! throughout the world.

DA-4 1 To control X & Y for PPTK

4 LCD display 4 Bending depth control 4 Back gauge control 4 Angle programming 4 Tool parameter setting +Retraction 4 100 program 4 25 steps per program 4 Swing arm control +Servo motor + ball screw

Technical Specifications

PPT SERIES (PPTK NC SYSTEM SERIES)

Width of machine mm 1060 1110 1110 1195 1275 1275 1275 1330 1330 1330 1435 1435 1550 1550 1550 1560

HeigM of machine 2149 1980 2110 2100 2110 2110 2430 2420 2420 25EO 2420 2520 2560 2760 3035 2610 --u- Y . 7 -

HPB SERIES (HPBK NC SYSTEM SERIES)

Motor power kW 7.5 11 11 11 15 15 15 15 22 22 22 22 22 22

Weight of machine Kg 7300 10800 11500 13000 14000 16000 17500 19000 16300 18500 17000 20660 22300 29000

Back gauge distancf mm 600 600 600 600 600 600 600 600 600 600 600 600 600 600

Volume of oil tank I 245 245 245 245 314 314 314 314 314 314 314 314 314 314

Length of machine mm 3200 3200 3200 4050 3250 4050 5050 6150 3250 4050 3250 4050 5050 6050

Width of machine mm 1250 1500 1500 1500 1640 1640 1700 1700 1900 1900 2000 2000 2000 2000

Height of machine mm 2600 2970 2970 2970 3320 3320 '3320 3320 3810 3810 3810 3810 3830 3830

~~ranua l bending depth

with mechanical counter

(up to 1500KN versions) A Motorized bending depth

with electrical display

UP to 1 5 0 0 ~ ~ versions A A upon 1500 KN versions A A Manual adjustment backnauae

f i - -

hanical eounter A A Motorized adjustment backgauge

with mechanical counter 1 or electrical display a A

6000T PRESS BRAKE complete wt of tooling

(straight punch and four way multi-Vdie) A A r7&;>:.,?;;,'. 4 ~. -:- ,; 2 ,-,; -..is.: ;<,?:-. 2; A t.;- :: :;:;i:;l.?'.75-.- t .. , - - . .~ I< L %l?:.5A

Crowning on the table

the fixed crowning

Motorized for crowning adjustment A A I

:,.=.y* 5- ;<,. &ni, . , on the top ~ o o l i n & ~ + & ~ ~ $ % '-,- #A Deep throat A

More than two stop fingers/backgauge heads A A

.. ..:,

nrlnl DDrK ra,isr\

X: Y-axis

WORLD'S LONGEST SHEAR 16M x 13mm A standard A Option

THE MANUFACTURER RESERVES THE RIGHTS TO MODIFY DESIGN, SPEClFlCATlONS , MECHANISM, ETC. TO IMPROVE THE PERFORMANCE OF THIS MACHINE WITHOUT NOTICE.

CORP. OFFICE : 201-202, KARMA STAMBH IN~USTRIAL ESTATE, OPP. MTNL OFFICE, L. B. S. MARG, VlKHROLl (W), MUMBAI-400 083 TEL.: 6796971 9 / 20 / 21, 2578451 5 FAX : 91 -22-25798809, 67969652

E-mail : infoQmachineryandspares.com Web : www.machineryandspares.com

SHOWROOM: PLOT NO. R495 / 1, RABALE MIDC, NAVl MUMBAI TEL: 022-65160046 FAX : +91-22-27602844

SALES OFFICES BARODA : BENGALURU : CHENNAI : 282 / 1 / A, GIDC, Makarpura, 603 - A, Mittal Tower, M. G. Road, 143, Angappa Naicken Street, BARODA-390010 BENGALURU-560 001 CHENNAI-600 001 Telefax : 0265-2641 121 Tel.: 25587728 Telefax : 080-25594143 Tel.: 25221 246 Telefax : 044-25221 245