Hyde catalog 2020 final - Hyde-Tools | For a better finish, start ...2 Painters’ Multi-Tools 17-in-1 Painter’s Tool Carbon Steel Multi-Tool Overmold handle with a thumb stop for

M A S T E R C ATA L O G

For a better fi nish,start online at hydetools.com

The HYDE® website is completely updated.Your online experience will be

easier, faster and more enjoyable

with a redesigned layout, simpler

navigation, and more features

tailored specifi cally for the pro.

We’ve made purchasing tools

easier, too. Visit hydestore.com

or amazon.com/hyde.

Painters’ Multi-Tools _________ 2

Putty Knives & Scrapers ________ 3Pro Stainless™, Black & Silver®, Pro Project™,Hardwood, Value Series™ / stainless steel, carbon steel, brass, economy plastic

Long-handled pull- and push-scrapers ______7

Wall Repair Tools ____________ 9Better Finish™ Nail Hole Filler, Wet & Set™

Wall Repair, Adhesive Wall Patches

Cleaning Brushes ___________ 10Stainless steel, high-carbon steel, nylon, brass

Water Tools ________________ 12Pivot Nozzle wands, PivotJet® Pro, PivotPro™ Garden

Airless Spray Painting Tools _ 13RVT® Rapid Valve Transfer, Quick Reach®, Angle Pro®, Dual Head Spray Tip Extension

Painting Accessories _______ 14

Sanding Tools ______________ 16Dust-free vac sanders, radial sander, ClawGrip™ sponge sander, pole sanders, sandscreens, hand sanders, foam sanders

Drywall Tools _______________ 19Taping knives, fi nishing trowels ___________ 19

Joint knives_____________________________ 20

Hawks, drywall tape, mud pans, drywall installation tools ________________________ 24

Tile & Flooring Tools ________ 26Trowels, adhesive spreaders, tile cutters, fl ooring knives, heavy-duty fl oor scrapers

Caulk Tools ________________ 29BetterFinish™ Caulk, caulk guns

Concrete & Masonry Tools __ 30Trowels, edgers, jointers, mixers

Wallcovering Tools __________ 31

Glass Tools _________________ 33Razor scrapers, single-edge razor blades

Utility Knives & Blades ______ 34Snap-off utility knives, top slide and fi xed blade utility knives, self-retracting safety knives

Trade Knives _______________ 37

Index ______________________ 42

2

Painters’ Multi-Tools

17-in-1 Painter’s Tool

Carbon Steel Multi-Tool

Overmold handle with a thumb stop for safety and a durable, carbon steel blade. 3/4" and 11/16" wrenches to connect a whip hose to a spray gun. 4 screwdriver bits fi tted under the Hammer Head®

plus a scribe/nail set. .072" thick blade.

0698517-in-1 Painter’s Tool 3" wide stiff scraping blade.

*Labeled, 0.8lb, 5pk

Pro Stainless™

Stainless Steel Multi-Tools

Rust-resistant stainless steel blade. Superior grip has overmold cushioning for prolonged patching jobs. Hammer Head® for resetting popped nails and dimpling nail holes. .055" thick blade. Guaranteed forever.

06988Pro Stainless™ 8-in-1 3" wide stiff scraping blade.


06986Pro Stainless™ 6-in-1 2-1/2" wide stiff scraping blade.


Black & Silver®

Stainless Steel Multi-Tool

Rust-resistant stainless steel blade and durable nylon handle. .050" thick, full-tang blade. Guaranteed forever.

01870Black & Silver® Stainless Steel 6-in-1 with Hammer Head®

2-1/2" wide stiff scraping blade. *Labeled, 1.0lb, 5pk

Black & Silver®

FlipBit™

Stainless Steel Multi-Tool

Stainless steel blade with a pivoting slotted screw bit built into the durable nylon handle. .055" thick blade. Guaranteed forever.

01970Black & Silver® 7-in-1 FlipBit™

2-1/2" wide stiff scraping blade.*Labeled, 3.9lb, 5pk

Black & Silver®

High-Carbon Steel Multi-Tools

High-carbon steel blade and durable nylon handle. .055" thick, full-tang blade. Guaranteed forever.

02980Black & Silver® 6-in-1 with Hammer Head®

2-1/2" wide stiff scraping blade.*Labeled, 1.2lb, 5pk

02970Black & Silver® 5-in-12-1/2" wide stiff scraping blade.


Pro Project™

Carbon Steel Multi-Tools

High-quality tools with an overmold comfort grip and Hammer Head. Carbon steel blades are hardened for durability.

06920Pro Project™ 10-in-1 with 4 Screw Bits2-1/2" wide stiff scraping blade.


06992Pro Project™ 6-in-1 2-1/2" wide stiff scraping blade.


Hardwood Handle

High Carbon Steel Multi-Tool

Solvent resistant handle. High-carbon steel blades are individually ground, polished and clear coated. Full-tang blade.

07975ProWood™ Extra Heavy Duty 5-in-1 2-1/2" wide stiff scraping blade.


Black & Silver®

Brass Non-spark blade for scraping delicate surfaces or working in volatile envi-ronments. Full-tang blade. Guaranteed forever.

02975Black & Silver® Brass 5-in-12-1/2" wide stiff scraping blade.


Pro Project™

Brass Non-spark blade for scraping delicate surfaces or working in volatile envi-ronments. Full-tang blade, hardened for durability.

06971Pro Project™ Brass 5-in-12-1/2" wide stiff scraping blade.


Value Series™

Stamped carbon steel blade with ergonomic handle.

04971Value Series™ 5-in-12-1/2" wide stiff blade.


3

Putty Knives & Scrapers

Pro Stainless™

STAINLESS STEELThese premium quality tools have a rust-resistant stainless steel blade that is double hollow-ground for the perfect fl ex point. Superior grip has overmold cushioning for prolonged patching jobs. Full, durable Hammer Head® for resetting popped nails and dimpling nail holes. .055" thick scraping blades. Guaranteed forever.

FLEXIBLE BLADE

061081-1/2" Flexible Pro Stainless™

Putty Knife *Labeled, 0.7lb, 5pk

062282" Flexible Pro Stainless™



Joint Knife *Labeled, 0.8lb, 5pk







STIFF BLADE

062581-1/4" Stiff Pro Stainless™


061581-1/2" Stiff Pro Stainless™

Scraper *Labeled, 0.7lb, 5pk

063082" Stiff Pro Stainless™


064083" Stiff Pro Stainless™ Scraper


065794" Stiff Pro Stainless™ Scraper


SuperFlexx™

STAINLESS STEEL Much greater fl exibility than other stainless steel tools on the market. A thinner hollow grind profi le and fl ex point. Overmold comfort grip and Hammer Head® for resetting popped nails and dimpling nail holes. Guaranteed forever.

061071-1/2" SuperFlexx™

Stainless Steel Putty Knife*Labeled, 0.6lb, 5pk

062572" SuperFlexx™

Stainless Steel Putty Knife *Labeled, 0.7lb, 5pk


Stainless Steel Joint Knife *Labeled, 0.7lb, 5pk







Black & Silver®

STAINLESS STEEL Highest quality Black & Silver® putty knives and scrapers with rust-resistant stainless steel blades and durable nylon handles. Full-tang blade. Some with Hammer Head® for resetting popped nails and dimpling nail holes. .055" thick blades. Guaranteed forever.

FLEXIBLE BLADE

010401-1/2" Flexible Black & Silver®

Stainless Steel Putty Knife *Labeled, 0.7lb, 5pk

011502" Flexible Black & Silver®



4

Black & Silver®

STAINLESS STEELFLEXIBLE BLADE




Stainless Steel Joint Knife with Hammer Head®













STIFF BLADE

011401-1/2" Stiff Black & Silver®


012401-5/16" Stiff Black & Silver®

Stainless Steel Chisel Putty Knife Chisel edge for getting under paint and coatings more easily. *Labeled, 0.8lb, 5pk

014403" Stiff Black & Silver®

Stainless Steel Chisel ScraperChisel edge for getting under paint and coatings more easily. *Labeled, 1.4lb, 5pk

Black & Silver®

HIGH-CARBON STEELTime-tested, pro-approved Black & Silver® tools with a high-carbon steel blade and durable nylon handle. Hollow-ground, .055" thick, full-tang blade. Some with Hammer Head® for resetting popped nails and dimpling nail holes. Guaranteed forever.

EXTRA FLEXIBLE BLADEExtra fl exibility for smoothing and feathering drywall compound.

021021-1/2" ExtraFlex™ Black & Silver®


023523" ExtraFlex™ Black & Silver®


028726” Black & Silver®

ExtraFlex™ Joint Knife with Hammer Head®

Extra fl exibility for applying, smoothing andfeathering compound. *Labeled, 1.5lb, 5pk

028526" ExtraFlex Black & Silver®


FLEXIBLE BLADE

020053/4" Flexible Black & Silver®









Joint Knife with Hammer Head®





















5

Black & Silver®

HIGH-CARBON STEELSTIFF BLADE

025653/4" Stiff Black & Silver® Chisel Putty Knife with Hammer Head®


022053/4" Stiff Black & Silver® Chisel Putty Knife *Labeled, 0.5lb, 5pk

020501-1/4" Stiff Black & Silver® Putty Knife *Labeled, 0.8lb, 5pk

020701-1/4" Stiff Black & Silver® Bent Blade Putty Knife20° angled blade; electrocoated for rust prevention. *Labeled, 1.6lb, 10pk

022001-5/16" Stiff Black & Silver® Chisel Putty Knifewith chisel edge for getting under paint and coatings more easily. .075" thick blade.


021501-1/2" Stiff Black & Silver® Putty Knife *Labeled, 1.0lb, 5pk

023002" Stiff Black & Silver® Putty Knife


025683" Stiff Black & Silver® Chisel Scraper with Hammer Head® with chisel edge for getting under paint and coatings. *Labeled, 1.6lb, 5pk

024003" Stiff Black & Silver® Chisel Scraper *Labeled, 1.6lb, 5pk

026004" Extra Heavy-Duty Stiff Black & Silver® Chisel Scraper


Hardwood HandlesHIGH-CARBON STEEL Pro-quality tools with solvent-resistant hardwood handles. .055" thick, high- carbon steel blades are individually ground, polished and clear-coated.

FLEXIBLE BLADE

070101-1/4" Flexible Putty Knife, Hardwood Handle


071101-1/2" Flexible Putty Knife, Hardwood Handle


073603" Flexible Joint Knife, Hardwood Handle








STIFF BLADE

070601-1/4" Stiff Putty Knife, Hardwood Handle


072101-1/4" Extra Heavy Duty Stiff Chisel Putty Knife, Hardwood Handle


071601-1/2" Stiff Putty Knife, Hardwood Handle


074103" Stiff Chisel Scraper, Hardwood Handle


Pro Project™

CARBON STEEL High-quality tools with an overmold comfort grip and Hammer Head® for resetting popped nails and dimpling nail holes. Different color schemes on handles to quickly distinguish flex vs. stiff tools. Ground and polished carbon steel blades are hardened for durability.

FLEXIBLE BLADE

061011-1/2" Flexible Pro Project™ Putty Knife *Labeled, 0.7lb, 5pk

062222" Flexible Pro Project™ Putty Knife *Labeled, 0.7lb, 5pk

063513" Flexible Pro Project™ Joint Knife *Labeled, 0.8lb, 5pk


065714" Flexible Pro Project™






STIFF BLADE

061511-1/2" Stiff Pro Project™ Scraper


062212" Stiff Pro Project™ Scraper


064013" Stiff Pro Project™

Chisel Scraper *Labeled, 0.8lb, 5pk

Value Series™

CARBON STEELEconomical tools with ergonomic handle shaped for comfort. Stamped carbon steel blades.

FLEXIBLE BLADE

040601-1/8" Flexible Value Series™




043523" Flexible Value Series™ Scraper




048516" Flexible Value Series™


STIFF BLADE

041511-1/2" Stiff Value Series™ Scraper


044013" Stiff Value Series™ Scraper


Black & Silver®

BRASS Heavy-duty Black & Silver® brass tools have stiff, non-spark, non-magnetic blades for scraping delicate surfaces or working in volatile environments. .055" thick, full-tang blade. Guaranteed forever.

020801-1/4" Stiff Black & Silver® Brass Putty Knife *Labeled, 1.9lb, 10pk

022151-5/16" Stiff Black & Silver® Brass Chisel Putty Knifewith chisel edge for getting under paint and coatings more easily. *Labeled, 2.0lb, 10pk

023202" Stiff Black & Silver® Brass Putty Knife *Labeled, 2.0lb, 10pk

024203" Stiff Black & Silver® Brass Chisel Scraper with chisel edge for getting under paint and coatings more easily. *Labeled, 3.0lb, 10pk

Pro Project™

BRASSHigh-quality tools with stiff nonspark brass blades for scraping delicate surfaces or working in volatile envi-ronments. Overmold comfort grip and Hammer Head® for resetting nails and dimpling nail holes. Blades hardened for durability.

060811-1/4" Stiff Pro Project™ Brass Scraper *Labeled, 0.7lb, 5pk

063212" Stiff Pro Project™ Brass Putty Knife *Labeled, 0.7lb, 5pk

064213" Stiff Pro Project™ Brass Scraper *Labeled, 0.8lb, 5pk

6

Hardwood Handle BRASS

Pro-quality with solvent- resistant hardwood handle with stiff, .055” thick, non-spark, non-magnetic blade for scraping delicate surfaces or working in volatile environments.

070241-1/2" Stiff Brass Scraper, Hardwood Handle *Labeled, 1.2lb, 5pk

Economy SeriesSPREADING TOOLS Lightweight polypropylene tool for spreading compounds. Easy cleanup, or toss when finished.

055101-1/2" Economy Series Spreading Tool *Labeled,1.5lb, 40pk

055202" Economy Series Spreading Tool *Labeled,1.6lb, 40pk

055303" Economy Series Spreading Tool *Labeled, 1.1lb, 20pk

05615Economy Series Combo Pack 2", 4", 6" Includes one each of 2", 4" and 6" tools.


05610Economy Series Combo Pack 1-1/2", 3", 6"Includes one each of 1-1/2", 4" and 6" tools.


MAXXGRIP PRO® Carbide Pull ScrapersHeavy-duty tungsten carbide blades will outlast carbon steel 10 to 1. Ergonomically engineered soft-grip handle provides extra leverage and less hand fatigue. Angled head for maximum scraping efficiency. Guaranteed forever.

106007/8" MAXXGRIP PRO® Carbide Scraper with 3-Edge BladeReplaceable 7/8" triangular carbide blade.

*Carded, 2.0lb, 3pk

106102" MAXXGRIP PRO® Heavy Duty Carbide Scraper with 2-Edge Blade Replaceable 2" 2-edge carbide blade.

*Carded, 2.4lb, 5pk

106202-1/2" MAXXGRIP PRO® Heavy Duty Carbide Scraper with 2-Edge Blade and Pull KnobReplaceable 2-1/2" 2-edge carbide blade.Hammer Head® inset for resetting nails.

*Carded, 3.0lb, 3pk

TUNGSTEN CARBIDE SCRAPER REPLACEMENT BLADES

111607/8" Scraper Blade, 3-EdgeReplacement for HYDE® scraper #10600.

*Carded, 0.3lb, 3pk

111702" Scraper Blade, 2-EdgeReplacement for HYDE® scraper #10610.

*Carded, 0.2lb, 5pk

111722" Scraper Blades, 2-Edge 5-PackReplacement for HYDE® scraper #10610.

*Carded, 0.2lb, 5pk

111712" Scraper Blades, 2-Edge 25-PackReplacement for HYDE® scraper #10610.

*Carded, 0.2lb, 5pk

111802-1/2" Scraper Blade, 2-EdgeReplacement for HYDE® scraper #10620.

*Carded, 0.2lb, 3pk

Black & Silver® Lifetime Pull ScrapersHeavy-duty high-carbon steel blades set in a well-balanced angled handle which provides good leverage and keeps knuckles away from work surface. Blades can be sharpened or replaced. Guaranteed forever.

105001" Lifetime Scraper, 2-Edge BladeReplaceable 1" blade with 2 scraping edges. Overall scraper length is 7-1/2".

*Carded, 1.1lb, 5pk

105101-1/2" Lifetime Scraper with 2-Edge BladeReplaceable 1-1/2" blade with 2 scraping edges. Overall scraper length is 7-1/2".

*Carded, 1.5lb, 5pk

105202-1/2" Lifetime Scraper with 2-Edge BladeReplaceable 2-1/2" blade. Overall scraper length is 9". *Carded, 2.0lb, 5pk

7

8

105301-1/2" Lifetime Scraper with 4-Edge BladeReplaceable 1-1/2" blade with 2 rough and 2 smooth scraping edges. Overall scraper length is 7-1/2". *Carded, 1.5lb, 5pk

105402-1/2" Lifetime Scraper with 4-Edge Blade and Pull KnobReplaceable 2-1/2" blade with 2 rough and 2 smooth scraping edges. Hammer Head®

inset for resetting nails. Overall scraper length is 12-1/2". *Carded, 4.0lb, 5pk

105505" Lifetime Scraper with 2-Edge Blade and Pull KnobReplaceable 5" 2-edge blade. Hammer Head® inset for resetting nails. Overall scraper length is 13-1/2".

*Carded, 5.4lb, 5pk

LIFETIME SCRAPER REPLACEMENT BLADES

110001" 2-Edge Scraper BladeReplacement for HYDE® scraper #10500.

*Carded, 0.3lb, 10pk

110501-1/2" 2-Edge Scraper BladeReplacement for HYDE® scraper #10510.


111002-1/2" 2-Edge Scraper BladeReplacement for HYDE® scraper #10520.


111201-1/2" 4-Edge Scraper Blade2 rough edges, 2 smooth edges. Replace-ment for HYDE® scraper #10530.


111251-1/2" 4-Edge Scraper Blade, 2-Pack2 rough edges, 2 smooth edges. Replace-ment for HYDE® scraper #10530.

*Carded, 0.5lb, 5pk

111302-1/2" 4-Edge Scraper Blade2 rough edges, 2 smooth edges. Replace-ment for HYDE® scraper #10540.


111352-1/2" 4-Edge Scraper Blade, 2-Pack2 rough edges, 2 smooth edges. Replace-ment for HYDE® scraper, #10540.

*Carded, 1.0lb, 5pk

111505" 2-Edge Scraper Blade, 2-PackReplacement for HYDE® scraper #10550.

*Carded, 1.0lb, 5pk

Heavy-Duty Push Scrapers

HIGH-CARBON STEEL BLADE

120003" Stiff Heavy-Duty Bent Blade Chisel Scraper5-1/2" polypropylene handle. Electrocoated blade with 20° angle. Measures 9" overall.


120603" Stiff Heavy-Duty Long Handle Bent Blade Chisel Scraper8" polypropylene handle. Electrocoated blade with 20° angle. *Labeled, 2.0lb, 5pk

120503" Stiff Heavy-Duty Long Handle Chisel Scraper8" polypropylene handle. Electrocoated blade. *Labeled, 2.0lb, 5pk

120103" Heavy-Duty Bent Blade Chisel Scraper / Hardwood HandleClear coated blade, bent 20°. Blade and handle joined with brass rivets.


120703" Stiff Heavy-Duty Bent Blade Chisel Scraper with Acme-Threaded HandlePolypropylene handle for hand-held use or with an Acme-threaded extension pole. Electrocoated blade with 20° angle.


120723" Stiff Heavy-Duty Chisel Scraper with Acme-Threaded HandlePolypropylene handle for hand-held use or with an Acme-threaded extension pole. Electrocoated blade. *Labeled, 2.1lb, 5pk

Scrapers

9

BRASS BLADE

Non-spark brass blade for delicate surfacesor working in volatile environments.

120401-5/16" Long Handle Brass Chisel ScraperPolypropylene handle with large hang hole for storage. Measures 11-1/4" overall.


120553" Long Handle Brass Chisel ScraperPolypropylene handle with large hang hole for storage. Measures 11-1/4" overall.


11200Blade Sharpening FileFor sharpening carbon steel scraper blades. Double cut for general purpose sharpening.


Dig-it™ Removal and Scraping ToolHeavy-duty, high-carbon steel, beveled bent blade with two ground-pointed edges for scraping paint or removing old caulk, grout, and mortar. Nylon han-dle with thumb bolster resists corrosion.

43670Dig-it™ Removal and Scraping Tool *Carded, 1.4lb, 5pk

Contour Scraper 6 stainless steel blades with twelve scraping edges. Quick-release lever for easy blade change without tools. Convenient storage case.

10450Quick-Release Contour Scraper

*Carded, 3.3lb, 5pk

Molding Scraper 9-3/4" tubular metal handle with foam handgrip. 2 high carbon steel blades: triangle with three 2-3/4" scraping edges and 2" x 1" teardrop blade. For use with heat guns.

10400Molding Scraper with 2 Blades

*Carded, 2.5lb, 5pk

10410Teardrop Molding Scraper BladeReplacement blade for HYDE® #10400 molding scraper. 2" x 1" teardrop blade.


10420Triangular Molding Scraper BladeReplacement blade for HYDE® #10400 molding scraper. 2-3/4" triangular blade with 3 scraping edges. *Carded, 0.8lb, 10pk

Better Finish™

Nail Hole Filler and Joint Compound3oz tube of joint compound allows you to fill nail holes and repair walls quickly and easily. Built-in applicator/spreader.

09914Better Finish™ Nail Hole Filler and Joint Compound Tube

*Tubed, 2.3oz, 6pk

09915Better Finish™ Wall Repair Patch KitIncludes 2 tubes of Better Finish™ Nail Hole Filler, one 4" wall patch and a 6" economy joint knife. *Carded, 5.3lb, 5pk

Wet & Set®

Wall and Ceiling RepairFabric patch that hardens into a permanent patch within minutes. Cut to size with scissors. Then, just dip in water and spread it over the damaged area. Ready for a finish coat within 20-30 minutes. Perfect for flat, curved or uneven surfaces.

09910Wet & Set® Repair Patch 5" x 15" Sheet

*Bagged, 3.0lb, 30pk

09911Wet & Set® Repair Patch 5" x 3-yard Contractor Roll

*Boxed, 7.0lb, 12pk

Wall Repair

CLI

EN

T: H

YD

E T

OO

LS

P

RO

JEC

T: 0

9910

WE

T &

SE

T S

HE

ET

Rev

ised

05-

2019

PAC

KA

GE

DIM

EN

SIO

NS

: CA

RD

SIZ

E 6

in.x

16

in.

FOLD

S T

O 6

in.x

8 in

.

TYP

EFA

CE

(S):

HE

LVE

TIC

A N

EU

E

PAN

TON

E C

OLO

RS

: P

MS

201

P

MS

116

B

LAC

K

CM

YK

BU

ILD

:

27/9

8/78

/24

0/10

0/15

/0N

OT

E: T

HE

CM

YK

BU

ILD

S IN

DIC

AT

ED

PR

OD

UC

E T

HE

MO

ST

AC

CU

RA

TE

RE

ND

ER

ING

OF

TH

E P

AN

TO

NE

CO

LOR

S IN

MO

ST

OFF

SE

T P

RIN

TIN

G S

ITU

AT

ION

S. D

O N

OT

US

E A

NY

OT

HE

R F

OR

MU

LAS

UN

LES

S A

PP

RO

VE

D B

Y C

LIE

NT.

WET & SET®

WALL REPAIR PATCHPARCHE PARA REPARACIÓN

EMPLÂTRE DE RÉPARATION MURALE

One 5in x 15in sheet Uno hoja de / Feuille de127mm x 381mm

• Amazingly fast and easy• Sets in 15 minutes• Repair & repaint same day • Increíblemente rápido y fácil• Se fija en 15 minutos• Repare y vuelva a pintar el mismo día • Étonnamment rapide et facile• Prêt en 15 minutes• Pour réparer et repeindre le même jour

Cut/Corte/Couper Wet/Moje/Mouiller Apply/Aplique/Appliquer

09910

Fix Holes/Fix Cracks/Fix Wall DamageRepare agujeros/Repare grietas/Repare daños de las paredes.Boucher les trous/Boucher les fissures/Réparer les dégâts sur le mur.

STEP 1: Cut patch to size allowing1 inch to overlap damaged area. For superior strength, use two equallayers.*Paso 1: Cortar el parche a unamedida que permita un traslapo de25mm con el área dañada. Pararesistencia óptima, usar dos capasiguales.*Étape 1: Découper l’emplâtre à ladimension voulue avec un débordement de 25mm de la surface endommagée. Pour une meilleure solidité, utiliser deux couches égales.*

STEP 2: Fill pan with warm water. Inone motion, dip Wet & Set

® patchinto water and remove immediately.Let excess water drip off.**Paso 2: Llenar una charola conagua tibia. En un solo movimiento,sumergir el parche Wet & Set® enel agua y retirarlo inmediatamente.Dejar que el exceso de aguaescurra.**Étape 2: Remplir une casseroled’eau chaude. En un seul mouvement,plonger l’emplâtre Wet & SetMD dans l’eau et retirer immédiatement.Laisser égoutter l’excès d’eau.**

STEP 3: Place patch over damagedarea. Smooth patch with fingers soit spreads evenly and holds tightlyto damaged area. Allow 30 minutesto dry.***Paso 3: Colocar el parche sobre elárea dañada. Alisar el parche con losdedos para esparcirlo uniformementey hacer que se adhiera firmemente alárea dañada. Dejarlo secar durante30 minutos.***Étape 3: Placer l’emplâtre sur lazone endommagée. Lisser l’emplâtreavec les doigts pour qu’il s’étendeuniformément sur la zone endommagée et reste en place. Prévoir 30 minutes pour sécher.***

STEP 4: Apply patching or jointcompound to patch and surroundingarea. Let dry, sand and apply secondcoat if needed. Sand until smooth.***Paso 4: Aplicar compuesto pararemiendos o juntas al parche y alárea circundante. Dejarlo secar, lijarloy aplicar una segunda capa si fueranecesario. Lijarlo hasta que estéliso.***Étape 4: Appliquer une pâte decolmatage ou un composé à joint àl’emplâtre et à ses alentours. Laissersécher, poncer et appliquer unedeuxième couche si nécessaire.***

* For large holes up to 6 inches in diameter, overlap two layers diagonally to strengthen the repair.* Para agujeros grandes de hasta 152mm, traslapar dos capas diagonalmente.* Pour les trous avec des diamètres allant jusqu’à 152mm, superposer deux couches en diagonale afin de renforcer la réparation.

** For ceiling repair, allow excess water to drip for 60 seconds while holding patch.** Para reparación de cielos rasos, permitir que el exceso de agua escurra durante 60 segundos mientras se sujeta el parche.** Pour une réparation du plafond, laisser égoutter l’excès d’eau pendant 60 secondes tout en maintenant l’emplâtre.

*** Blow dryer can be used to speed drying time.*** Se puede utilizar una secadora de aire.*** Le séchoir à air chaud peut être utilisé pour accélérer le temps de séchage.

Tools & Materials needed:• Safety Glasses• Gloves• Dust Mask• Bucket of Warm Water• Scissors or Utility Knife• Joint Knife (3in or wider)• Patching Compound• SandpaperHerramientas y materiales necesarios:• Gafas protectoras• Guantes• Máscara antipolvo• Cubeta con agua tibia• Tijeras o navaja multiuso• Espátula para juntear (76mm ó más de anchura)• Compuesto para remiendos• LijaOutils et matériaux nécessaires:• Lunettes de sécurité• Des gants• Un masque à poussière• Seau d'eau chaude• Ciseaux ou couteau tout usage• Couteau pour joints (76mm ou plus)• Une pâte de colmatage• Papier de verre

CAUTION: Keep out of reach of children¡Cuidado! Manténgase fuera del alcance de niñosMise en garde: Tenir hors de portée des enfantsWear eye protectionUsar gafas protectorasPorter un équipement de protection des yeuxSand with adequate ventilation. Wear properbreathing protection.Lijar con ventilación adecuada. Utilizar protecciónrespiratoria apropiada.Poncer avec une ventilation adéquate. Porter unmasque respiratoire adéquat.

CAUTION: Wear Rubber Gloves. Wet & Set® contains natural rubber latex, which may cause allergic reactions. The setting process gives off heat and should not be in direct contact with skin during settling. For contact with skin or eyes, flush with water for 15 minutes. Seek medical attention immediately if irritation occurs.¡Cuidado! Utilizar guantes de caucho. Wet & Set® contiene látex de caucho natural, el cual podría causar reacciones alérgicas. El proceso de fraguado desprende calor, por lo cual no debe haber contacto directo entre el parche y la piel durante el mismo. En caso de contacto con la piel u ojos, lavársela o lavárselos inmediata y abundantemente con agua durante al menos.Mise en garde: Porter des gants en caoutchouc.Wet & SetMD contient du latex d’élastomère-caoutchouc naturel qui peut provoquer des réactions allergiques. Le processus de préparation émet de la chaleur et ne doit pas être en contact direct avec la peau pendant cette période. En cas de contact avec la peau ou les yeux, rincer à grande eau pendant 15 minutes. Consulter immédiatement un médecin en cas d’irritation.

WARNING/ADVERTENCIA/AVERTISSEMENTCancer and Reproductive HarmCáncer y daños reproductivosCancer et problèmes de reproductionwww.P65Warnings.ca.gov

©2019 Hyde Tools, Inc., a Hyde Group company Southbridge, MA 01550

800-872-4933 www.hydetools.comMade in Mexico / Fabricada en México / Fabriqués au Mexique

079423099106

Bear Claw™

Drywall ClipsRepair any size holes in drywall and plaster with-

out cutting back to the studs. No tools required. One-hour fi re rated.

090371/2" Bear Claw™ Drywall Repair Clips 8-Pack *Carded, 1.9lb, 20pk

Self-Adhesive Wall Patches

Fiberglass mesh with a perforated aluminum

plate. Covers without additional back-ing. Works with drywall, plaster, wood and other materials.

098984" x 4" Wall Patch


099034" x 4" Wall Patches 50-Pack

*Carton, 2.5lb, 50pk

098996" x 6" Self-Adhesive Wall Patch



*Carton, 5.0lb, 50pk

090078" x 8" Wall Patch




Crack Patching Tools

45400Crack OpenerClean and open cracks for patching. Carbon steel blade, hardwood handle.

*Carded, 0.7lb, 5pk

45450Crack PatcherPlated steel for patching drywall, masonry, plaster. Flat bell and pointed ends.


MAXXGRIP PRO®

Wire BrushesMore 12-gauge (.40mm) wire bristles per square inch with sturdy, soft-grip ergo-nomic handles with fi nger protectors.

STAINLESS STEEL BRUSHES

468338-3/4" Stainless Steel Wire BrushBrush area measures 3" x 3/4"

*Carded, 1.6lb, 4pk

4683111-3/4" Stainless Steel Wire BrushBrush area measures 6" x 1"

*Carded, 2.5lb, 4pk

4684211" Stainless Steel Wire BrushBrush area measures 5-1/2" x 1"

*Carded, 2.2lb, 4pk

HIGH-CARBON STEEL BRUSHES

468328-3/4" High-Carbon Steel Wire BrushBrush area measures 3" x 3/4"

*Carded, 1.6lb, 4pk

468359-1/4" High-Carbon Steel Wire Brush with ScraperBrush area measures 3-1/4" x 1"


4683011-3/4" High-Carbon Steel Wire BrushBrush area measures 6" x 1"

*Carded, 2.5lb, 4pk

4683411-3/4" High-Carbon Steel Wire Brush with ScraperBrush area measures 6" x 1"

*Carded, 2.8lb, 4pk

4684111" High-Carbon Steel Wire BrushBrush area measures 5-1/2" x 1"

*Carded, 2.2lb, 4pk

MAXXGRIP PRO®

Scrub Brushes

468388" Stainless Steel Wire Scrub BrushBrush area measures 8" x 1-1/4"

*Carded, 3.0lb, 4pk

468406-3/4" High-Carbon Steel Wire Scrub BrushAcme threaded for use with a handle or extension pole. Brush area measures 6-1/2" x 2-1/4" *Carded, 4.8lb, 4pk

Wall Repair

10

Cleaning Brushes

468378" High-Carbon Steel Wire Scrub BrushBrush area measures 8" x 1-1/4"

*Carded, 3.0lb, 4pk

MAXXGRIP PRO® Mini Brushes

46843Mini Brush 3-Pack (Brass, Nylon, Stainless)

*Bagged, 1.7lb, 6pk

Stripping BrushesA full line of stripping brushes with a wide range of designs in carbon steel, brass and stainless steel.

STAINLESS STEEL BRUSHES

46800Stainless Steel Stripping BrushBrush area measures 1-1/8" x 2-1/4" with .15mm bristles. Overmold handle.

*Carded, 1.0lb, 6pk

46810Stainless Steel Stripping Brush with ScraperBrush area measures 1/2" x 5-1/4" with .35mm bristles. Overmold handle.

*Carded, 3.0lb, 6pk

46812Stainless Steel Grout BrushBrush area measures 5/8" x 2-1/4" with .15mm bristles. Overmold handle.


CARBON STEEL BRUSHES

46802Carbon Steel Wire Stripping BrushBrush area measures 3/4" x 4-3/4" with .35mm bristles. Overmold handle.

*Carded, 2.5lb, 6pk

46805Carbon Steel Wire Stripping Brush with ScraperBrush area measures 1-3/4" x 5" with .35mm bristles. Overmold handle.

*Carded, 3.5lb, 6pk

BRASS BRUSHES

46811Flexible Brass Grout BrushBrush area measures 5/8" x 2-1/4" with .15mm bristles. Overmold handle.


46801Flexible Brass Stripping BrushBrush area measures 1-1/8" x 2-1/4" with .15mm bristles. Overmold handle.

*Carded, 1.3lb, 6pk

BRASS / NYLON BRUSHES

468133-in-1 Paint Stripping Wire Brush.64mm nylon bristles for general cleaning, plus a .15mm brass wire bristle detail brush. Plastic scraper in handle.

*Carded, 1.0lb, 6pkk

Wood-Handled Wire BrushesHigh-quality carbon steel wire bristles. Durable hardwood handle.

46846Carbon Steel Wire Brush with ScraperBrush area measures 1-1/2" x 5-3/4"


46847Stiff Carbon Steel Wire BrushBrush area measures 1-1/16" x 5-1/2"

*Carded, 4.3lb, 6pk

46850Carbon Steel Wire BrushBrush area measures 1" x 6-1/2"

*Carded, 4.3lb, 6pk

Mini Brushes1/2-inch bristles of brass, nylon, or stainless steel. 7-inch offset polypropylene handles.

46630Brass Bristle Mini Brushes 3-Pack


46640Nylon Bristle Mini Brushes 3-Pack


46650Stainless Steel Bristle Mini Brushes 3-Pack Bagged, 2.0lb, 12pk

46660Mini Brush 3-Pack Assortment (Brass, Nylon, Stainless)

Bagged, 2.0lb, 12pk

11

12

Water Tools

PivotJet® Pro Water WandLightweight 38" aluminum pole with slide grip pivots nozzle up to 135°. Nozzle spray pattern adjusts from fi ne mist to high pressure. Soft-touch foam comfort grip. Built-in soap reservoir with clean water / soap mixture control.

28470PivotJet® Pro Water Wand *Carded, 1.25lb, 1pk

PivotPro™ GardenThe 3-setting pivoting spray nozzle adjusts the spray head from shower to soak to jet to match every job. 4-1/2 feet of extra reach with a pivoting head controlled by the slide grip lets you work high, low, up and under anything without bending and stretching. When you’re done in the garden, just add soap to the reservoir and you’re ready for outdoor cleanup. The 16oz. additive dispenser has a built-in liquid ratio adjustment. No-kink garden hose attachment with extra washers.

28476PivotPro™ Garden *Carded, 2.43lb, 1pk

Pivot Nozzle Wands for gas pressure washersAlso refered to as a pressure washer lance. Rated for up to 4000 PSI. Soft-touch, rubberized grip provides non-slip control. Patented twist grip pivots the nozzle as you work. Heavy duty, lightweight housing has a chrome-plated steel shaft, providing durability and corrosion resistance.

2844040" Pivot Nozzle Wand / 1/4" style *Carded, 3.3lb, 1pk

2843028" Pivot Nozzle Wand / M22 style *Carded, 2.9lb, 1pk

HeadPivots90°

Male-styleconnection

13

Airless Spray Tools

Rapid Valve TransferTechnology The HYDE® RVT® Airless Spray System combines a high-quality airless spray gun with a lightweight, telescoping pole. But here’s the real deal: to move from spraying with a gun to using an exten-sion, you simply switch the valve from gun to pole — without powering down — and continue on.

28700 Airless Spray System with RVT® Technology Full kit includes an airless

spray gun with an RVT valve, tip, tip guard and inline fi lter, and a 5-1/2' to 8-1/2' spray pole. Gun is fully assembled and ready to spray.

*Clam pack, 6.6lb, 1pk

28710 RVT® Spray Gun Includes gun, RVT valve,

tip, tip guard and inline fi lter.


28715RVT® Replacement Valve For use with RVT System (item #28700) or Spray Gun (item #28710).

*Clam pack, 2.lb, 4pk

28720 RVT® Replacement Spray Mount Also fi ts all RVT-compatible

QuickReach® spray poles (items #28670, #28680, #28690).


28735 RVT® Replacement Inline Filter Housing


28740 RVT® Replacement Filter


QuickReach®

Telescoping Poles QuickReach® poles extend

out to their maximum height in seconds — from 4-1/2' to 12' depending on model — offering the pro-fessional painter freedom of reach. Can be used with all major brands of spray gun or with the HYDE®

RVT System.

28670 4.5' – 6.5' QuickReach®

Telescoping Spray Pole Extends from 4.5"' to 6.5"' to

paint heights up to 10"'.*Boxed, 4.0lb, 1pk

28680 5.5' – 8.5' QuickReach®

Telescoping Spray Pole Extends from 5.5' to 8.5' to

paint heights up to 16"'.*Boxed, 4.7lb, 1pk

28690 7.5' – 12' QuickReach®

Telescoping Spray Pole Extends from 7.5' to 12'

for painting areas normally reached on a ladder.

*Boxed, 5.7lb, 1pk

28730 QuickReach®

Replacement Mount (RVT® Compatible)

Replacement mount for RVT-compatible QuickReach®

poles or with the RVT System.*Boxed, 4.6lb, 4pk

AnglePRO®

Spray Poles Change the spray angle up to 145° without stopping to manually adjust. Pressure rated to 4000PSI.

282603" AnglePRO® Spray Pole

*Boxed, 2.0lb, 1pk

282705" AnglePRO® Spray Pole

*Boxed, 3.0lb, 1pk

Dual Head Tip Extension

For use with .4GPM+ spray pumps. 2 offset tips extend the coverage while giving the right amount of overlap. Uses 5 & 6 series tips; fi ts all "G" thread guns. Aircraft aluminum — weighs less than 1lb.

28760Dual Head Tip

Extension*Carded, 2.0lb, 2pk

14

Painting Accessories

PROShield®

Spray ShieldsPivotNeck system adjusts to any angle. 18" Acme-threaded hardwood handles.

ALUMINUM SPRAY SHIELDS

2801024" x 9" Flexible Spray Shield




2802024" x 9" Stiff Spray Shield






POLYSTYRENE SPRAY SHIELDS





28100Spray Shield Cardboard Clip with 18" Handle *Carded, 5.1lb, 6pk

2807018" Hardwood Replacement HandleFor any spray shield or cardboard clip.

*Carded, 2.0lb, 6pk

Corner Ease®

Paint RollerThis specialty lambswool roller creates a professional fi nish when painting corners, edging, fences, and other diffi cult areas. The roller tray provided is designed to sit within a 5-gallon bucket.

45820Corner Ease® Lambswool Roller & TrayIncludes roller hub, cover and paint tray/grid.

*Boxed, 5.0lb, 4pk

45850Corner Ease® Lambswool Replacement Cover


Paint MixersFor use with electric drills. Not for usewith epoxies.

43440 StirWhip™ 1-5 Gallon All-purpose Mixer Flexible nylon “fi ngers” fi t thru

5-gallon pour-spouts. Mix paint, concrete, compound, grout, and more in 1-5 gallon containers. 3/8" steel hex shaft for use with 500-1500 rpm drills


43420 1-Qt./Gal. Paint Mixer Polypropylene impellers and plated

steel drive shaft. 11" x 1/4" hex shaft, 2-5/8" impellers.

*Carded, 1.9lb, 6pk

43430 5-Gallon Paint Mixer Polypropylene impellers and plated

steel drive shaft. 17-1/2" x 5/16" hex shaft, 3-1/8" impellers.

*Carded, 3.2lb, 6pk

43460 Multi-Blade Paint Mixer Rugged polypropylene with 7"

hexagonal shaft for use with 3/8" drill. *Carded, 1.0lb, 10pk

Paint Shields and Guides

ALUMINUM PAINT SHIELDSCurved spring aluminum with offset handle.

4500010" Aluminum Paint Shield


4500515" Aluminum Paint ShieldCurved spring aluminum with offset handle.


MINI GUIDE™ / SUPER GUIDE™

Stainless steel blade extends beyond handle to reach into corners. High-impact styrene handle.

4580511-1/2" Mini Guide™ Paint Shield


4581024-1/2" Super Guide™ Paint Shield


458078" Smoothing Tool/Paint ShieldSturdy white polypropylene construction with tapered working edge.


43510Painter’s Pyramid® 10-PackPyramids hold the workpiece above your working surface, allowing you to paint one side, immediately fl ip the workpiece and complete the job without the drying time. New lock & tab system for tying down or connecting to each other. Supports up to 200 pounds. Chemical resistant.

*Carded, 1.1lb, 4pk

15

459705 Gallon Pour SpoutScrew top and tint plug spout for 5-gallon bucket.


PAIL HOOKS

45050Pail Hooks (2)Specially designed to hang pails to the outside of a ladder. One-piece plated steel construction. Not recommended for 5-gallon pails.


45110Swivel Pail HookPointed steel hook with swivel hinge. Snap catch holds pail’s handle firmly. Not recommended for 5-gallon pails.


PAINT CAN OPENERSOne-piece plated steel construction. Use "loop" end to open bottles.

46445Paint Can Openers 2-Pack


46455Paint Can Openers 250-Pack

*Boxed, 1.1lb, 250pk

451155-Quart Paint PailRugged polyethylene pail with quart and liter graduations marked inside. Metal reinforced rim and plated metal handle.


4705014" Paint Paddle

*Bulk, 22.0lb, 500pk

45042Window Sash PainterFlexible metal tool with paint pad on one end reaches into window sashes, radiators or other hard-to-reach areas for finish painting.


19460Molding and Trim PullerRemove molding and trim without damaging walls. Wedge-shaped heavy-duty steel body withstands hammering. Integrated nail puller and no-slip handle with hand guard.


456009-1/2" Bent Pry BarElectrocoated high carbon steel has been hardened and tempered, with nail slot and sharp, ground ends for scraping.


45200Window OpenerStainless steel sawtooth blade saws paint from between frame and sash of windows that are painted shut. Tubular metal handle with plastic handgrip. *Carded, 1.0lb, 5pk

44280Tack ClothOpen mesh 18" x 36" bleached cheesecloth is chemically treated to remove dust, dirt and sanding residue prior to painting.


Paint SpatulasSpring steel blades, hardened and tempered. Two-piece hardwood handles with double-rivet construction.

410103/8" Paint Spatula


410605/8" Paint Spatula

*Carded,1.1lb, 10pk

411101" Paint Spatula *Carded,1.3lb, 10pk

Painting and Refinishing Gloves

46750Disposable Gloves 6-Pack (3 Pairs)Clear plastic gloves for paint-ing, decorating, gardening and household cleaning. One size fits all (left or right).


44240Refinishing Gloves, 1 PairNatural rubber with neoprene construction resists most common paint thinners. Use for handling chemicals; paint-ing, decorating, automotive and gardening work. Textured fingers for improved grip. One size fits all.


Cleanup Tools

44250Quickly Clean™ GloveClean your hands and tools with just water — no harsh chemicals or scouring pads.

*Carded, 0.6lb, 5pk

45960Black & Silver® Stainless Steel Brush & Roller CleanerGuaranteed forever. *Carded, 1.0lb, 5pk

45950Paint Brush CombStainless steel teeth, polypropylene handle unaffected by most common paint thinners.


43470Paint Brush & Roller Spinner/Cleaning ToolSpin clean paint rollers and paintbrushes up to 6". Durable steel construction.

*Carded, 1.5lb, 1pk

16

Dust-Free Vacuum SandersAttach to your wet-dry vacuum and eliminate up to 99% of the dust. HYDE®

dust-free sanders use abrasive sand-screen nets that are washable, reusable, and longer lasting than sandpaper. All dust-free sanders come with a universal adapter that fi ts any standard wet/dry vac.

09180 Professional

Dust-Free Pole Sander (with pole) 2-piece aluminum pole extends from 28" to 56". EasyClamp™ system for quick and easy sheet load-ing. 6-foot fl exible hose.

*Boxed, 4.8lb, 1pk

09170Dust-Free Vacuum Pole Sander Kit (without pole)

*Boxed, 2.2lb, 1pk

09175Dust-Free Vacuum Pole Sander Kit (with pole) EasyClamp™ system for quick and easy sheet load-ing. 6-foot fl exible hose.

*Boxed, 5.6lb, 1pk

09165Dust-Free Vacuum Hand Sander KitEasyClamp™ system for quick and easy sheet loading. 6-foot fl exible hose.

*Boxed, 1.9lb, 1pk

09160Dust-Free Sponge SanderUses a washable sanding sponge that works on any type of surface. 3-foot fl exible hose.

*Boxed, 1.0lb, 4pk

RadialSander The lightest radial sander on the market with a unique pivoting

hinge and round shape that prevents fl ipping. The HYDE® radial sander accepts any 9" round abrasive material that has the hook and loop attachment feature.

099779" Radial Sander *Boxed, 3.3lb, 3pk

RadialDuster Wrap pad around radial sander to clean drywall

surfaces after sanding. Durable, machine washable microfi bers. Can also be used wet or dry on fl oors.

099729" Radial Duster *Bagged, 1.5lb, 5pk

NET ABRASIVE SANDING DISCSFor use with any 9" radial sander using the hook and loop system. Lasts 3 times longer than sandpaper. Made with an open weave structure that minimizes “loading up” of the material, all but eliminating clogging even when used on painted wall preparation jobs. Unlike sanding screens, the variable net structure leaves no sanding pattern or uniform scratch lines that show up after fi nishing.

09919120 Grit Sanding Disc / 10-Pack

*Bagged, 3.7lb, 1pk


*Bagged, 3.7lb, 1pk


*Bagged, 3.7lb, 1pk


*Bagged, 3.7lb, 1pk


*Bagged, 3.5lb, 1pk


*Bagged, 3.5lb, 1pk


*Bagged, 3.5lb, 1pk


*Bagged, 3.5lb, 1pk

Sanding Tools

17

Quick Change Pole Sanders

ALUMINUM SANDING HEADHigh-quality lightweight. Easy-Clamp™ system allows for quick sheet changes. Uses 3-1/4" x 9-3/8" abrasive sheets.

09047Aluminum Pole Sander HeadAcme-threaded female end fits standard extension poles. *Carded, 3.4lb, 5pk

09048Aluminum Pole Sander with 48" Acme-Threaded Pole

*Carded, 8.6lb, 5pk

ECONOMY SERIES

09046Economy Series Pole Sander Head3-1/4" x 9" polypropylene head with foam pad. Wing nut clamps hold abrasive sheets firmly. Acme-threaded female end fits standard extension poles.

*Carded, 3.0lb, 5pk

ClawGrip® Sponge SanderAluminum sanding head has two “claws” that grab hold of a sanding sponge. The U-joint design provides a smooth, no-flip sanding action. Sponges last 3 times longer than sand-paper and can be rinsed and reused.

09049ClawGrip® Pole Sander with Flat Sanding SpongeComes with medium-grit sponge #09083.

*Carded, 3.7lb, 5pk

09082ClawGrip® Pole Sander with Triangular Sanding SpongeComes with 3-sided, fine-grit sanding sponge #09056. *Carded, 3.7lb, 5pk

SANDING SPONGESUse as is or attach to a ClawGrip® sander. Can be rinsed and reused.

09051220 Grit Sanding Sponge, 4-sided8-7/8" x 4" x 3/4" *Carded, 0.9lb, 6pk




09056220 Grit Triangular Sanding SpongeGrit on all three sides for sanding both sides of an inside corner simultaneously. Measures 8-7/8" x 2-1/2". *Carded, 1.0lb, 6pk

Net Abrasive SheetsLasts 3X longer than sandpaper. Made with an open weave structure that minimizes "loading up" of the material, all but eliminating clogging even when used on painted wall preparation jobs. Unlike sanding screens, the variable net structure leaves no sanding pattern or uniform scratch lines that show up after finishing. Precut in standard 3-5/16" x 11-1/4" rectangular sheets for conven-tional and dust-free hand sanders.

09933 120 Grit Net Abrasive Sheets2-Pack *Bagged, 3.2lb, 1pk



09937240 Grit Net Abrasive Sheets2-Pack *Bagged, 3.2lb, 1pk





Sanding Tools

18

Hand Sanders

09057Soft Grip Quick-Change Drywall Hand SanderOvermold handle with EasyClamp™ system for quickly changing abrasive sheets. 3-1/4" x 9" aluminum-backed rubber sanding pad.

*Carded, 4.0lb, 5pk

09157Economy Series Drywall Hand SanderLightweight hand sander for sanding drywall joints. 3-1/4" x 9-3/8" foam sanding pad. Wing nut clamps hold abrasive sheets fi rmly.

*Carded, 1.8lb, 5pk

45395Heavy-Duty Rubber Sanding BlockAll-purpose, wet or dry sanding block. Flexible rubber construction holds paper securely. Fits 1/4 sheet of sandpaper.


Foam Sanding BlocksUse wet or dry for fl at or contour sanding. Rinse to clean.

45310Foam Sanding Block / 2 sanding sides (Fine/Medium)Block measures 2-3/4" x 4" x 1". 2 sanding sides of fi ne and medium grit.


45320Foam Sanding Block / 2 sanding sides (Medium/Coarse)Block measures 2-3/4" x 4" x 1". 2 sanding sides of medium and coarse grit.


45350Foam Sanding Block / 4 sanding sides (Fine/Medium)Heavy-duty aluminum oxide abrasive. Use wet or dry. Block measures 3" x 5" x 1". 4 sanding sides of fi ne and medium grit.


45360Foam Sanding Block / 4 sanding sides (Medium/Coarse)Heavy-duty aluminum oxide abrasive. Block measures 3" x 5" x 1". 4 sanding sides of medium and coarse grit.


45375Angled Foam Sander / 4 sanding sides (Medium/Coarse)Dual angle reaches into tight corners.


45390 Drywall Sanding SpongeThree-layer sponge includes abrasive side for sanding drywall; super-absorbent side for cleaning and wiping surfaces; and center layer to act as a spine and to shield abrasive surfaces from oversaturation. Measures 9" x 4-1/2" x 1-7/8". *Bagged, 2.0lb, 12pk

19

Sanding Tools

Pro Stainless®

Rust-resistant stainless steel taping knives have a lightweight, comfortable handle offering excellent control for feathering and knockdown texturing. Blades are tapered for running corners faster. Sturdy, soft grip with Hammer Head® and hang hole for storage. Extruded or fl at back.

STAINLESS STEEL EXTRUDED BACK

093238" Pro Stainless™ Taping Knife








STAINLESS STEEL FLAT BACK









Pro Project™

Lightweight, comfortable and fl exible, these blue steel taping knives offer excellent control for feathering and knockdown texturing. Blades are tapered for running corners faster. Sturdy, soft grip for comfortable, extended use. Extruded or fl at back.

BLUE STEEL EXTRUDED BACK

092238" Pro Project™ Taping Knife








BLUE STEEL FLAT BACK



0926310" Pro Project™Taping Knife






Value Series™

23% lighter than conventional taping knives. One-piece polypropylene handle. Blue steel or rust-resistant stainless steel blades

STAINLESS STEEL FLAT BACK

093128" Value Series™ Taping Knife






BLUE STEEL FLAT BACK











Drywall Taping Knives & Finishing Trowels

20

Drywall Finishing Trowels

Offset Taping andWallpaper Knife301 stainless steel blade measures 10" x 3-3/4". Offset polypropylene handle is ideal for cornerbead and fi ne fi nish applications.

09100Offset Taping & Wallpaper Knife


52-54 HRC High Carbon Steel Finishing TrowelPro-quality high-carbon steel trowel has Rockwell hardness tested at 52-54 HRC. Flat blade style, blade measures 12” x 4-1/2”. Smooth hardwood handle.

1852052-54 HRC High Carbon Steel Finishing Trowel *Labeled, 4.5lb, 5pk

High Carbon Steel Finishing TrowelsFinishing trowels with contoured ergo-nomic handles are designed for cement, plaster and drywall fi nishing. One-piece high-carbon steel blades are hardened, tempered and ground.

0995011" x 4-1/2" Flat Finishing Trowel


0996012" x 4" Flat Finishing Trowel


1860014" x 4" Finishing Trowel


Carbon Steel Finishing TrowelsHigh-quality, carbon steel trowels with fl at blade and rubberized grip.

1855011" x 4-1/2" Carbon Steel Flat Finishing Trowel


1855512" x 4" Carbon Steel Flat Finishing Trowel


SuperFlexx™

STAINLESS STEEL Made specifi cally for the drywall pro, these rust-resistant stainless steel blades combine a Rockwell hardness that resists dulling and wear with much greater fl exibility than other joint knives. Overmold comfort grip and Hammer Head® for resetting popped nails and dimpling nail holes. Guaranteed forever.










Drywall Joint Knives

21

Drywall Joint Knives

Pro Stainless™

STAINLESS STEEL Premium quality, with a flexible rust- resistant stainless steel blade, double hollow-ground for the perfect flex point, plus a durable Hammer Head® for resetting popped nails and dimpling nail holes. Superior grip has overmold cushioning. Guaranteed forever.

065784" Pro Stainless™ Joint Knife with Hammer Head®










Black & Silver®

STAINLESS STEEL Highest quality Black & Silver® joint knives feature a full-tang, hollow ground, rust-resistant, stainless steel blade with desired flex point for applying and smoothing compound and taping joints. Durable nylon handle. Guaranteed forever.

015504" Black & Silver® Stainless Steel Joint Knife with Hammer Head®


015404" Black & Silver® Stainless Steel Joint Knife *Labeled, 1.0lb, 5pk







FlipBit™

STAINLESS STEELRust-resistant, stainless steel blade with desired flex point for applying and smoothing compound and taping joints. Durable nylon handle with a pivoting #2 Phillips screwdriver. Guaranteed forever.

019403" FlipBit™ Stainless Steel Joint Knife *Labeled, 4.2lb, 5pk



Drywall Joint Knives, Corner Tools

22

Full-metal™STAINLESS STEEL Professional grade knives with a hollow-ground blade designed to have the perfect fl ex. The all-metal design includes a Hammer Head® for setting nails and dimpling nail holes. Rust resistant and easy to clean. Guaranteed forever.

065774" Full-metal™ Stainless Steel Joint Knife *Labeled, 1.3lb, 5pk




Black & Silver®

HIGH-CARBON STEELFeaturing a full-tang, hollow-ground, high-carbon steel blade with desired fl ex point for applying compound and taping joints. Durable nylon handle. Guaranteed forever.

025504" Black & Silver® Joint Knife


025704" Black & Silver® Joint Knife with Hammer Head®










028726" Black & Silver®

ExtraFlex™ Joint Knife with Hammer Head®

Extra fl exibility for applying, smoothing andfeathering compound. *Labeled, 1.5lb, 5pk

028526" Black & Silver® ExtraFlex™

Joint KnifeExtra fl exibility for applying, smoothing and feathering compound. *Labeled, 1.2lb, 5pk










*Labeled, x.xlb, 5pk

Hardwood HandleHIGH-CARBON STEEL Pro-quality joint knives with the ideal fl ex point for spreading compound. Hollow-ground, high-carbon steel blades, polished and clear coated.

077605" Hardwood Handle Joint Knife








23

Pro Project™

CARBON STEELStraight-ground joint knives with over-mold comfort grip and flexible carbon steel blade. Hammer Head® for re-setting popped nails and dimpling nail holes. Blades hardened for durability.

065714" Pro Project™ Joint Knife with Hammer Head®






Value Series™

CARBON STEELEconomical joint knives with comfort-able ergonomic handle. Flexible carbon steel blades, hardened for durability.

047014-1/2" Value Series™ Joint Knife


048516" Value Series™ Joint Knife


Economy Series Lightweight polypropylene tools for spreading compound.

055404" Economy Series Spreading Tool






05615Economy Series Combo Pack (2", 4", and 6") *Labeled, 3.4lb, 20pk

Black & Silver® Pointing KnivesProfessional-grade pointing knives for taping and finishing inside corners and tight areas. Full-tang blades. Guaranteed forever.

02700Black & Silver® Drywall Pointing Knife3-1/2" blade. *Labeled, 1.1lb, 5pk

02701Black & Silver® Drywall Clipped Pointing Knife6" blade at 30° angle. *Labeled, 1.1lb, 5pk

Corner Tools

STAINLESS STEEL

09410MAXXGRIP® Stainless Steel Inside Corner ToolBlades at 103° angle flex tightly into corners. Lightweight, offset handle with nonslip grip. Guaranteed forever. *Labeled, 3.4lb, 5pk

09425MAXXGRIP® Stainless Steel Outside Corner ToolBlades at 83° angle flex tightly around corners. Lightweight, offset handle with nonslip grip. Guranteed forever. *Labeled, 3.5lb, 5pk

09411Stainless Steel Inside Corner Tool with Hardwood Handle


ECONOMY

05560Economy Series Inside Corner ToolLightweight 2-1/2" polypropylene blades. *Labeled, 1.4lb, 20pk

095105-Way Smoothing ToolMultiuse smoothing tool for spreading drywall compound and shaping inside corners. Three smoothing edges: 4", 6" and 10".


09158Inside Corner Wipe-Down ToolLightweight 6-1/2" rubber flexes to fit inside angles other than 90°. Creates smooth, consistent cor-ners. Use hand-held or slip-fit onto 1"-diameter poles. Easy to clean.


24

Drywall Installation Tools

Joint Compound Mud Pans0901212" Stainless Steel Heli-arc Welded Mud PanMeasures 4-1/4" x 13-3/4" at top, 2-5/8" x 12-1/8" at bottom, 3-1/2" deep.


0901414" Stainless Steel Heli-arc Welded Mud PanMeasures 4-1/4" x 15-3/4" at top, 2-5/8" x 14-1/8" at bottom, 3-1/2" deep.


0907212" Stainless Steel Spot Welded Mud PanMeasures 4-1/4" x 13-3/4" at top, 2-5/8" x 12-1/4" at bottom, 3-1/2" deep.


0907112" Galvanized Spot Welded Mud PanGalvanized steel with spot-welded seams. Resists rust and wear. Measures 4-1/4" x13-3/4" at top, 2-5/8" x 12-1/4" at bottom, 3-1/2" deep. *Labeled, 13.0lb, 10pk

0907512" Heavy Duty Mud Panwith Metal-EdgesMeasures 4-3/4" x 13-3/4" at top, 3" x 12" at bottom, 3-1/4" deep.


0906012" Plastic Mud PanHeavy-duty plastic mud pan with molded edges for wiping blades clean. Measures 4-3/4" x 13-3/4" at top, 2-5/8" x 12-1/2" at bottom, 3-1/4" deep.


MAXXGRIP®

Drywall HawksLightweight aluminum blade, grooved to keep compound from slipping. Open, soft grip handle designed to fi t on stag-ing post. Swivel ring for easy turning.

0907313" MAXXGRIP PRO®

Drywall Hawk *Labeled, 8.0lb, 5pk

0907410" MAXXGRIP PRO®

Drywall Hawk *Labeled, 5.1lb, 5pk

Self-AdhesiveDrywall Joint TapeStrong fi berglass mesh reinforced for taping and patching drywall. Adhesive eliminates need for pre-plastering. For use with quick-setting compound. Will not blister or bubble. Faster and easier than conventional paper.

09062Self-Adhesive FiberglassJoint Tape 2" x 50’ Roll

*Boxed, 1.2lb, 5pk

09065Self-Adhesive Fiberglass Joint Tape 1-7/8" x 300’ Roll

*Boxed, 8.0lb, 10pk

09090Fast-load Drywall Tape Dispenser Plated steel dispenser holds drywall tape rolls up to 2-1/4” x 500’. Hangs from belt. Tape (not included) threads easily through dispensing slot for quick feed and clean tear-off.


02996Black & Silver® Pail Popper®

Pail OpenerSharp hook cutter for removing plastic 5-gallon bucket lids. Full-tang electrocoated 3" scraper/spreader blade. Durable nylon handle with Hammer Head® end. Guaranteed forever. *Labeled, 1.5lb, 5pk

09110Drywall Circle Cutter Cut holes up to 16" (406mm) in diameter. Adjustable pivot point and English/metric calibrations in 1/8" (5mm) graduations. Heavy-duty steel construction with replace-able cutting blade. *Carded, 3.3lb, 5pk

0903448" Heavy Duty Fixed T-Square Anodized aluminum with easy-to-read numbers. 2" x 48" blade, 1-1/2" x 22-1/2" offset head. Width equals size of standard outlet box. *Carded, 6.3lb, 2pk

09985Drywall Rasp For shaping and fi tting drywall boards.

*Carded, 2.1lb, 5pk

09986Drywall Rasp Replacement Blades *Carded, 0.7lb, 10pk

09068Professional Drywall HammerRounded and checkered face indents drywall for finishing. Nail-puller slot. Hickory handle.


09081Drywall Lifting ToolLift and move drywall sheets into position for nailing. Heavy-duty steel construction.


09983Mini Drywall Lifting ToolPocket-size tool lifts drywall sheets 2" to position for installation. Measures 6".


09039Drywall Screw Adapter Bit#2 Phillips tip for driving drywall screws. For use with 1/4" or larger electric drill. Countersets screws. *Carded, 0.5lb, 10pk

09980Air Texture Hopper Gun1-1/2-gallon plastic hopper with die cast metal gun. 3 nozzle sizes. Adjustable fluid control knob. Minimum 6-1/2 CFM at 25 PSI.

*Boxed, 5.0lb, 1pk

09885Texture Brush, DoubleNatural hemp fiber bristles produce textured surfaces on ceilings or walls. Hardwood construction with clear protective coating. Acme thread fits all standard handles and extension poles. *Labeled, 9.5lb, 5pk

09880Texture Brush, Single


09086SuperSoft Knee PadsWide neoprene straps with Velcro fasteners for adjustable fit. *Bagged, 7.5lb, 6pk

MAXXGRIP® Acrylic Knockdown KnivesFlexible, transparent knockdown knife with angled polycarbonate blade with rounded corners to prevent damage to surfaces. Soft-grip handle is Acme- threaded for use with an extension pole. Tempered aluminum bridge keeps blade straight.

0999718" MAXXGRIP® Knockdown Knife


0999824" MAXXGRIP® Knockdown Knife


Drywall Installation Tools

25

26

Tile and Flooring Tools

MAXXGRIP®

Adhesive TrowelsSoft-grip handle that is comfortable and easy to clean. Carbon steel blade is hardened and tempered to hold its shape. Cast aluminum handle spine is riveted to blade for durability.

19032MAXXGRIP® Adhesive Trowel 3/32" x 3/32" V-notchFor wallboard, metal and ceramic tile. 4-1/2" x 11" blade. *Labeled, 4.0lb, 5pk

19062MAXXGRIP® Adhesive Trowel 1/16" x 1/16" x 1/16" SQ-notchFor carpet, wall tile, vinyl and vinyl materials. 4-1/2" x 11" blade. *Labeled, 4.0lb, 5pk

Economy TrowelsHardened and tempered steel blade with rugged, easy-to-clean polypro-pylene handle. 4-1/4" x 9-1/4" blade, except where noted.

SINGLE-NOTCH

19030Economy Adhesive Trowel 1/4" x 5/32" V-notchFor linoleum and asphalt materials.


19050Economy Adhesive Trowel 1/4" x 1/4" x 1/4" SQ-notchFor medium fl oor and wall tile; laminated wood plank fl ooring. *Labeled, 6.0lb, 10pk

19070Economy Adhesive Trowel 1/4" x 3/8" x 1/4" SQ-notchFor large ceramic tile, quarry tile and pavers.


19066Economy Tapered Adhesive Trowel, Extra-Long Blade 1/8" x 1/16" x 1/16" U-notchExtra-long 4-1/2" x 13-1/8" blade for general fl ooring. Tapered ends with rounded corners fi t into confi ned areas. 1/8" x 1/16" x 1/16" U-notch on 2 sides. *Labeled, 6.4lb, 10pk

DOUBLE-NOTCH

19040Economy Adhesive Trowel SQ-notch/U-notchFor carpet, wall tile, linoleum, vinyl and vinyl materials. 1/16" x 1/16" x 1/16" square notch on 2 sides and 1/16" x 1/32" x 1/32" U-notch on 2 sides. *Labeled, 6.0lb, 10pk

19060Economy Adhesive Trowel Double U-notchFor linoleum, vinyl and asphalt materials. 3/32" x 3/32" x 1/8" on 2 sides and 1/16" x 1/32" x 1/32" on 2 sides.


19063Economy Adhesive Trowel U-notch/V-notchFor ceramic tile and fl ooring. 3/32" x 3/32" x 1/8" U-notch on 2 sides and 1/4" x 5/32" V-notch on 2 sides. *Labeled, 6.0lb, 10pk

19065Economy Adhesive Trowel V-notch/SQ-notchFor special adhesive applications. 3/32" x 1/8" x 15/32" V-notch on 2 sides and 1/16" x 1/16" x 1/16" square notch on 2 sides.


19067Economy Adhesive Trowel Double U-notch, 13-1/8" BladeExtra-long 4-1/2" x 13-1/8" blade for use with vinyl and vinyl materials. 1/16" x 3/64" x 1/16" on 2 sides and 1/16" x 1/32" x 5/64" on 2 sides. *Labeled, 6.4lb, 10pk

19041Economy Offset Adhesive Trowel Double U-notch, 10-1/2" Blade4-1/2" x 10-1/2" blade for vinyl and vinyl materials. 5° offset blade fi ts into corners and along base molding. 1/16" x 1/16" x 1/16" on 2 sides. 1/64" x 1/16" x 1/32" on 2 sides. *Labeled, 6.2lb, 10pk

Adhesive Spreaders

VALUE SERIES™

HIGH-CARBON STEEL

Polypropylene handle. For wallboard, metal, and ceramic tile.

041243" Value Series™ Adhesive Spreader 1/4" x 5/32" V-notch

*Labeled, 0.8lb 5pk

041263" Value Series™ Adhesive Spreader 1/16" x 3/32" x 1/16" SQ-notch *Labeled, .6lb 5pk

RIGID COLD-ROLLED STEEL

1-piece steel, shaped to fi tinto 1-gallon can.

19090Metal Adhesive Spreader 3/32" x 3/32" x 1/8" U-notchFor linoleum and asphalt materials.


19100Metal Adhesive Spreader 1/16" x 1/16" x 1/16" SQ-notchFor rubber and plastic materials.


19110Metal Adhesive Spreader 3/16" x 5/32" V-notchFor wallboard, metal and ceramic tile.


19120Metal Adhesive Spreader 1/16" x 1/32" x 1/32" SQ-notchFor vinyl and vinyl materials.


Plastic Spreaders055323" Plastic Adhesive Spreader 3/16" x 5/32" V-notchFor wallboard, metal and ceramic tile.


055343" Plastic Adhesive Spreader 1/16" x 1/16" x 1/16" SQ-notchFor rubber and plastic materials.


27


19400Carbide Ceramic Tile Nipping ToolBalanced forged steel construction. 5/8"-wide offset jaws with carbide cutting edge cuts tile up to 1/2" thick. *Carded, 5.0lb, 5pk

19410Carbide Ceramic Tile Cutter Replaceable carbide cutting wheel and a built-in breaker bar. *Carded, 3.0lb, 5pk

19408Heavy Duty Carbide Cutter plus 3 BladesTungsten carbide cutting tool for Durock and Wonderboard. Score cement board, drywall, fiberglass roofing, flooring and laminate.

*Carded, 1.5lb, 5pk

46807Nylon Grout BrushOvermold handle with 5/8" flexible nylon bristles. Brush area measures 5/8" x 2-1/4".

*Carded, 2.5lb, 6pk

19402Professional Grout SawOffset blade mount, double blade design. Removes damaged grout. Includes 2 blades.

*Carded, 1.5lb, 5pk

19403Grout Saw Replacement Blades 2-Pack *Carded, 0.3lb, 5pk

18400Professional Grout BagSeamless plastic grout bag. Molded tip can be cut to the desired opening. Easy to clean. Measures 12" x 24". *Boxed, 1.5lb, 10pk

Tile SpacersPolypropylene spacers for fast, accu-rate tile installation and alignment.

19660250 Tile Spacers 1/16" thickness

*Bagged, 1.0lb, 6pk


*Bagged, 2.0lb, 6pk


*Bagged, 3.0lb, 6pk


*Bagged, 4.5lb, 6pk

09086SuperSoft Knee PadsWide neoprene straps with Velcro fasteners for adjustable fit. *Bagged, 7.5lb, 6pk

42095Adjustable Blade Carpet KnifeAdjustable blade retracts for safety. Offset head for leverage. High-impact plastic. 4-edge reversible blade. Change blade with-out tools. 6 blades included.

*Carded, 0.8lb, 5pk

42105Carpet Knife Replacement Blades 5-PackReplacement blades for #42095 carpet knife.


42129Carpet Knife Replacement Blades 100-PackReplacement blades for #42095 carpet knife.

*Boxed, 0.8lb, 1pk

Long- and Short-point Flooring KnivesHigh-carbon cutlery steel blade. Long-point blades protect from scraped knuckles. Short-point blades for more durability. Hardwood handle.

202002-1/2" Long-point Flooring KnifeFor multi-material cutting.

*Carded, 1.1lb, 5pk

202502-1/2" Short-point Flooring Knife

*Carded, 1.1lb, 5pk

203502-1/2" Long-point Flooring/ Drywall Knife *Carded, 1.1lb, 5pk

204502-1/2" Long-point Vinyl KnifeFor cutting soft and hardcore vinyl.

*Carded, 1.5lb, 5pk

206103-1/2" Flooring/Drywall Knife


Black & Silver® Flooring KnivesHeavy-duty .072” blades with 5° offset angle for cutting leverage. Soft-grip handles. Guaranteed forever.

20550Black & Silver® Flooring/ Roofing KnifeHollow ground chrome vanadium steel blade.

*Carded, 1.5lb, 5pk

20600Black & Silver® Hose Cutter/All-Purpose Trade KnifeStainless steel serated blade.

*Uncarded, 2.0lb, 5pk

28


Heavy-Duty Floor & Tile ScrapersStiff, electrocoated, heavy-duty high-carbon steel blade angled at 20° for push-scraping.

192003" Heavy Duty Floor & Tile Scraper with 55" handle


192056" Heavy Duty Floor & Tile Scraper with 55" handle


Offset ScrapersTwo-handed scraper with offset blade for removing fl oor adhesive, light-duty tile and linoleum. Rust-resistant bright plated carbon steel blade is reversible and replaceable (#19453).

194245" Offset Scraper with 12" Handle

*Carded, 3.7lb, 4pk

194235" Offset Scraper with 48" Handle

*Carded, 13lb, 5pk

Hammer ScrapersTwo-handed push-style scraper for chiseling off fl ooring materials such as tile and linoleum. Foam on the handle and a rubber striking grip provide hand protection. Die cast head with welded neck will not spin loose.

194255" Offset Hammer Scraper with 12" HandleReversible 5" blade; can be resharpened.

*Carded, 3.0lb, 4pk

194535" Scraper Replacement BladeReplacement blade for scrapers #19423, #19424, and #19425.


194304"/6" Hammer Scraper with 18" HandleReversible 4" blade; can be resharpened. 6" blade also available (#19452).

*Carded, 3.6lb, 2pk


*Carded, 6.4lb, 2pk


*Carded, 6.0lb, 2pk

194514" Scraper Replacement BladeReplacement blade for HYDE® hammer scrapers #19430, #19440, and #19450.


194526" Scraper Replacement BladeReplacement blade for HYDE® hammer scrapers #19430, #19440, and #19450.


Heavy-Duty Floor & TileChisel Scrapers3" high-carbon steel blades.

120103" Heavy-Duty Bent Chisel Scraper with Hardwood HandleBlade bent at 20° for added leverage. Blade and handle permanently joined with brass rivets. Brass-plated hang hole.


120003" Heavy-Duty Bent Chisel Scraper / Polypropylene HandleBlade bent at 20° for added leverage. 5-1/2" handle. Measures 9" overall.


120603" Long Handle Bent Chisel Scraper / Polypropylene HandleBlade bent at 20° for added leverage. 8" handle. Measures 11-1/2" overall.


120503" Long Handle Chisel Scraper8" polypropylene handle.


120703" Bent Chisel Extension Pole ScraperOne-piece polypropylene handle. Use hand-held or with an Acme-threaded extension.Blade bent 20° for added leverage.


120723" Extra Heavy-Duty Chisel Extension Pole ScraperOne-piece polypropylene handle. Use hand-held or with an Acme-threaded extension.


120553" Long Handle Brass Chisel ScraperBrass non-spark blade. 8" polypropylene handle. Measures 11-1/2" overall.


29

Caulking Tools

Heavy-Duty Caulk Guns

9" – 10oz RATCHET STYLEFor use with all 9” cartridges. Apply caulking compounds, adhesives, and lubricants.

464849"/10oz. Professional Heavy-Duty Caulk GunHeavy-duty chrome-plated steel frame with ladder hook. Built-in spout cutter, seal puncture tool and contoured trigger.


463109"/10oz. StopDrip Caulk GunPowder-coated steel frame resists corrosion. StopDrip engineering prevents overfl ow.


464109"/10oz. Caulk Gun Homeowner SeriesPowder-coated steel frame resists corrosion. Quick-release thumb lever.


9” – 10oz HEX/SMOOTH STYLEFor use with all 9” cartridges. Apply caulking compounds, adhesives, and lubricants.

464829"/10oz. Professional Heavy-Duty Hex Rod Caulk GunHeavy-duty chrome-plated steel frame. Built-in spout cutter, seal puncture tool and quick-release thumb lever.


464359"/10oz. Skeleton Frame Hex Rod Caulk GunHeavy-duty orange powder-coated steel frame. Built-in spout cutter, seal puncture tool and quick-release thumb lever.


464009"/10oz. Smooth Rod Caulk GunHomeowner SeriesPowder-coated steel. Quick-release thumb lever. *Labeled, 12.5lb, 12pk

13" – 32oz RATCHET STYLEFor use with all 13" cartridges. Apply caulk-ing compounds, adhesives, and lubricants.

4642013"/32oz. StopDrip Ratchet Rod Caulk GunPowder-coated steel frame. Contoured squeeze trigger, spout cutter, seal puncture tool and StopDrip overfl ow prevention.


Caulk Repair

43650Caulk-Away™ ToolPlastic caulk removal tool reaches into tight channels to shave old caulk clean from tile or window mullions. *Carded, 1.4lb, 10pk

43640 Caulk-Away™ & Caulk-Rite™

Combo Pack Use Caulk-Away to shave old caulk clean from tile or window mullions. Caulk-Rite tool lays down a smooth bead of replacement caulk. For use with silicone, latex, and acrylic caulks.

*Carded, 0.5lb, 5pk

43660Caulk Aid Refresh old caulk with a single tool and a minimum of effort. Sharp, high-impact plastic blades shave old caulk clean from tile or window mullions. The sharp point removes any remaining caulk from crevices. The padded end will smooth a new caulk bead. A tube cutter on the back slices open the replace-ment caulk tube.


43670Dig-it™ Removal and Scraping ToolHigh-carbon steel, beveled bent blade with two ground-pointed edges for removing old caulk. Nylon handle with thumb bolster.

*Carded, 1.4lb, 5pk

Better Finish®

Caulk RepairThese caulk repair products include everything needed to complete projects in one innovative and convenient 2.8 oz tube. Each includes a patented applicator head with three tip sizes and a Fresh Seal Plug that keeps air out after opening.

09961 Better Finish® Caulk Repair, Interior/Exterior Siliconized acrylic caulk forms

weatherproof seal for indoor and outdoor window, doors and trim. Paintable in 20 minutes. 50-year durability. *Tubed, 2.8oz, 12pk

09968 Better Finish® Caulk Repair, Kitchen & Bath, White Siliconized acrylic caulk forms

watertight seal for sinks, tubs, and tile. Paintable. Mildew resistant for up to 10 years. 50-year durability.

*Tubed, 2.8oz, 12pk

09969 Better Finish® Caulk Repair, Kitchen & Bath, Clear *Tubed, 2.8oz, 12pk

09971 Better Finish® Caulk Repair, Fast Dry Interior Acrylic caulk for trim and mould-

ing gap sealing. Paintable in 20 minutes and competely dry in less than 40 minutes. 20-year durability.

*Tubed, 2.8oz, 12pk

1800014" x 4" MAXXGRIP®

Concrete TrowelHardened, tempered high-carbon steel blade.


18400 Professional Grout Bag Seamless plastic grout bag.

Molded tip can be cut to the desired opening. Easy to clean. Measures 12" x 24".

*Boxed, 1.5lb, 10pk

MAXXGRIP® Margin &Tuck Pointing TrowelsHigh-lift handle for maximum hand clearance when doing brickwork. Soft grip for comfort and easy cleanup. Forged one-piece blades of hardened, tempered, high-quality carbon steel for extra strength.

180501-1/2" x 5" MAXXGRIP®

Margin Trowel *Labeled, 1.3lb, 5pk

180602" x 5" MAXXGRIP® Margin Trowel


180801/2" x 6" MAXXGRIP® Tuck Pointing Trowel *Labeled, 2.7lb, 5pk

MAXXGRIP® BrickPointing TrowelsHigh-lift handle for maximum hand clearance. Soft grip for comfort and easy cleanup. Forged one-piece blades of hardened, tempered, high-quality carbon steel for extra strength.

PHILADELPHIA STYLEWide Philadelphia-style brick trowel holds more mortar on the blade. Welded shank.

181005-1/2" MAXXGRIP® Philadelphia Style Pointing Trowel


181107" MAXXGRIP® Philadelphia Style Pointing Trowel *Labeled, 2.1lb, 5pk

1809010" MAXXGRIP® Philadelphia Style Brick Trowel *Labeled, 4.5lb, 5pk

LONDON STYLELondon-style brick trowel has narrow tip for pointing and rounded heel that forces mortar forward on the blade.

1809510" MAXXGRIP® London Style Brick Trowel *Labeled, 4.5lb, 5pk

Edgers & Jointers

180401/2" MAXXGRIP® Edger6" x 2-7/8" polished steel edger with soft-grip handle and sturdy steel mounting. Curved edges prevent gouging.


181703/8" – 1/2" Heavy-Duty Steel Brick JointerOne-piece high-carbon steel. Offset design for hand clearance. Two polished half round working surfaces with different joint sizes. Measures 10" overall. *Labeled, 3.0lb, 10pk

Heavy-Duty MixersHigh-performance mixers for use with electric drills. Mix cement, concrete, mortar, driveway sealer, epoxies, and more.

09105 24" Power-Driven Mixer,

Fixed Impellers Plated steel mixer with two fi xed

5"-diameter impellers for use with 1/2" or larger low-rpm electric drill. 24" overall length.


09114 24" Power-Driven Wet/Dry Mixer Nonstick polypropylene blades,

5"-diameter double impeller, 3/8" plated steel shafts.

*Carded, 4.8lb, 4pk

09059 28" Power-Driven Mixer

for 5 to 55 Gallon Drums Welded steel mixer for use with

1/2" or larger low-rpm electric drill. 3/8" hexagonal shaft extends 1/2" below impeller to prevent bottoming out.


30

Concrete and Masonry Tools

31

MUDSLINGER® POWER MIXERSMix compounds, paints, epoxies, and more.

46540 1-5 Gallon Mudslinger®

Power Mixer 1-3/4" diameter to fit through pour

spout of 5-gallon containers. 3/8" x 19" hex shaft.


46555 1-5 Gallon Mudslinger®

Power Mixer 2-1/4" diameter, with 3/8" x 16"

hex shaft. *Labeled, 2.5lb, 4pk

46560 5-Gallon Mudslinger®

Power Mixer 3-1/4" diameter, with 3/8" x 16"


46565 5-Gallon Mudslinger®

Power Mixer 4" diameter, with 1/2" x 23-1/2"


33210Wallpaper Scoring ToolPerforate wallcoverings to speed removal. When used in a circular motion, 96 stainless steel teeth make shallow cuts to allow liquid remover or steam to penetrate and loosen adhesive without damage to wall.

*Carded, 1.5lb, 5pk

Wallpaper Scrapers

065794" Stiff Pro Stainless™ ScraperRust-resistant stainless steel blade with bevel edge. Double hollow-ground, plus Hammer Head® end for resetting nails and dimpling nail holes. *Labeled, 1.5lb 5pk

026004" Extra Heavy-Duty Stiff Black & Silver® Chisel Scraper4" high-carbon steel blade with chisel edge and durable nylon handle. Full-tang blade. Guaranteed forever. *Labeled, 1.8lb, 5pk

332504" Glass and Wall Scraper with Blade StorageReplace 4" blade fast and without tools. Overmold handle stores up to 5 blades. 1 reversible blade included; one side scrapes, the other shaves.


Offset Wallpaper Shaver/ScrapersCarbon steel blades with angled heads for better leverage. Flip blade to scrape paint or stickers off glass and mirrors.

331204" Wallpaper Shaver/ScraperPush-button blade change requires no tools. Double lock for positive blade holding.

*Carded, 2.0lb, 5pk

331104" Wallpaper Shaver/ScraperTubular metal handle with cushioned foam grip. Measures 12" overall.

*Carded, 2.8lb, 5pk

33095 4" Offset Wallpaper Scraper with 44" HandleTwo-handed scraper with 44" handle for longer reach. *Carded, 7.0lb, 5pk

331003-1/4" Wallpaper Shaver/ScraperTubular metal handle with cushioned foam grip. Measures 11" overall.

*Carded, 2.6lb, 5pk

WALLPAPER SHAVER REPLACEMENT BLADES

Flip blade for wallpaper removal or glass scraping.

331704" Wallpaper Shaver Replacement Blades 5-Pack


33255Universal Wallpaper Shaver Replacement Blades 5-Pack4" replacement shaver blades also snap off to fit 3-1/4" shavers. *Carded, 0.7lb, 10pk

331503-1/4" Wallpaper Shaver Replacement Blades 5-Pack


Wallcovering Tools

Wallcovering Installation Tools

31550Quick-Change Razor Knife with 1 BladeMetal frame holds single-edge razor blade. Hardwood handle. *Carded, 1.0lb, 5pk

3401511" MAXXGRIP® Stainless Steel Professional ShearsStainless blades with precision tip for scoring materials to be cut. Soft-grip handles fi t left or right hand. *Carded, 2.0lb, 5pk

3560028" Prepasted Wallcovering TrayMeasures 7-1/2" x 33" at top, 4-1/2" x 28" at bottom, 4" deep. *Labeled, 7.0lb, 10pk

Smoothing/Trim Tools

4581024-1/2" Super Guide™ Paint Shield & Smoothing ToolStainless steel blade. Styrene handle.


4580511-1/2" Mini Guide™ Paint Shield & Smoothing ToolStainless steel blade. Styrene handle.


09100Offset Taping & Wallpaper Knife301 stainless steel blade with offset polypro-pylene handle. *Labeled, 4.5lb, 5pk

3578912" Vinyl Smoothing BrushPolypropylene bristles. *Labeled, 3.0lb, 10pk

45808 10" Smoothing Tool Sturdy polypropylene.


45815 11" Smoothing Tool Sturdy polypropylene.


45807 8" Smoothing Tool Polypropylene construction.


Wallpaper Rollers

HARDWOOD HANDLESSpring steel frame on hardwood handle.

30160Oval Hardwood Seam Roller3-1/4" wide roller. *Carded, 1.2lb, 5pk

30100Flat Hardwood Roller3-1/4" wide roller. (Note: Use oval roller #30160 for rolling seams.)

*Carded, 1.3lb, 5pk

30250Flat Hardwood 2-in-1 RollerFlat hardwood roller converts to offset style corner roller. (Note: Use oval roller #30160 for rolling seams.) *Carded, 1.1lb, 5pk

RED STAR™Polypropylene handle. Side-mounted roller for smoothing corners.(Note: Use oval roller #30160 for rolling seams.)

30120Red Star™ Flat Hardwood Roller

*Carded, 0.8lb, 5pk

30122Red Star™ Flat Plastic RollerLightweight fl at plastic. *Carded, 0.5lb, 5pk

Retractable Blade Single-edge RazorScrapers

DELTA™ HEAVY-DUTY RAZOR SCRAPER Ergonomically engineered for better grip and precise control. Large ribbed control button for safer operation. Blade track design minimizes clogging for positive blade extension.

13010Delta™ Heavy-Duty Razor ScraperBlades not included. *Carded, 2.5lb, 20pk

13000Delta™ Heavy-Duty Razor Scraper plus 1 BladeIncludes one single-edge blade.


13050Delta™ Heavy-Duty Razor Scraper plus 5 Blades5 single-edge razor blades included.


RAZOR SCRAPERS WITH BLADE STORAGE

13040Glass Scraper plus 5 BladesErgonomic design with overmold for comfort and sure grip. Stores up to 5 blades in handle. 5 blades included.


13045Glass Scraper plus 2 BladesLow-profi le retractable scraper with blade lock. Safe blade removal and replacement. Blade storage in the handle. 2 blades included. *Bagged, 0.9lb, 10pk

32

Wallcovering Tools Glass Tools / Single-edge Razor Blades

33

Glass Tools / Single-edge Razor Blades

Fixed-blade Scrapers

13020Mini Glass ScraperPolypropylene construction.One single-edge razor blade included. *Carded, 0.5lb, 10pk

13030Mini Glass Scraper with Blade Storage plus 5 Blades Stores 5 razor blades in handle. Polypro-pylene construction. Accepts standard single-edge razor blades. 5 blades included.


13065Folding Glass Scraper plus 5 BladesMetal construction opens like a pocketknife. Locks in three scraping positions. Measures 7-1/2" overall. 5 single-edge razor blades included. *Carded, 4.0lb, 10pk

13070Long Handle Glass Scraper with 5 BladesOffset angled metal frame with contoured polypropylene handle for extra leverage. Accepts standard single-edge blades. 5 blades included.

*Carded, 1.8lb, 5pk

13080Utility Blade Glass ScraperRetractable blade with positive lock. Built-in 1/16" sash guide maintains paint/glass seal. Accepts all standard utility knife blades. 1 heavy-duty blade included.


33250Quick-change 4" Glass Scraper with Blade StorageReplace 4" blade fast and without tools. Overmold handle provides a secure, comfortable grip. Stores up to 5 blades in the handle. 1 reversible blade included; one side scrapes, the other shaves.


332554" Scraper Replacement Blades 5-Pack4" blades also snap off to fit 3-1/4" scrapers. Fits scraper #33250 and other brands.


Glazing Tools

45700Carbide Wheel Glass CutterHeavy-duty tungsten carbide cutting wheel. Balanced cast metal handle.

*Carded, 0.5lb, 5pk

02950Black & Silver® 2-in-1 Glazing Tool1-1/4" scraper for removing old putty and driving push-style glazing points and a slotted V-blade for applying a smooth strip of putty. *Carded, 1.0lb, 5pk

45760 Glazing Points, Push-Style Push-style points hold glass

against sash beneath putty.*Carded, 0.6lb, 10pk

Single-edge RazorBlades .009" thick. Industrial-quality steel. Individually wrapped for safety. 13120Single-edge Razor Blades 5-Pack

*Boxed, 0.9lb, 20pk

13110Single-edge Razor Blades 10-Pack2 packs of 5 blades. *Carded, 1.1lb, 10pk

13135Single-edge Razor Blades 100-Blade Storage Box

*Boxed, 0.7lb, 1pk

13125Single-edge Razor Blades 100-PackReusable dispenser package.


13145Single-edge Razor Blades 10-PackUsed-blade storage for safe disposal.


13138Single-edge Razor Blades 50-Pack10 packs of 5 blades in a convenient storage box. *Boxed, 5.0lb, 1pk

13140Single-edge Razor Blades 100-Pack20 packs of 5 blades in a convenient storage box. *Boxed, 1.0lb, 1pk

13127Heavy Duty (.012") Single-edge Blades 100-Pack.012" thick. Reusable plastic container.


Snap-Off Utility KnivesBreak off blade tip for a new sharp point.

25MM SNAP-OFF UTILITY KNIFE7 points per blade.

4205125mm Snap-Off Blade Utility Knife with Screw Lock Ratchet wheel screw lock withholds 100 pounds of force without blade retracting. Rugged safety grip and anodized steel blade holder assure durability. Spare blade storage in the handle. 2 blades included.


18MM SNAP-OFF UTILITY KNIVES8 points per blade.

4205018mm Snap-Off Blade Utility Knife with Screw LockRatchet-wheel screw lock provides 44 pounds of holding force without blade retracting. Easy blade changing and a stain-less steel blade holder for durability. Bit hole in handle can be used for screwdriver.

*Carded, 0.19b, 10pk

42030Auto-Lock 18mm Snap-Off Blade Utility Knife Retractable blade with one-piece positive lock. High-impact polystyrene with stainless steel blade track. Built-in blade breaker. Handle stores 2 blades. 3 blades included.


4204718mm Snap-Off Blade Utility Knife Retractable blade with 2-piece positive lock. High-impact polystyrene. 1 blade included.


9MM SNAP-OFF UTILITY KNIVES13 points per blade.

42027MAXXGRIP® 9mm Snap-Off Blade Utility Knife 2-blade storage in handle, plus built-in blade breaker. Stainless steel blade track allows for left- or right-hand use. Retractable blade with 1-piece positive lock. 3 blades included.


42045Auto-Lock 9mm Snap-Off Blade Utility Knife High-impact polystyrene with stainless steel blade track. 3 blades included.


420359mm Snap-Off Blade Utility KnifeRetractable blade with 2-piece positive lock. High-impact polystyrene. 1 blade included.


42036Economy 9mm Snap-Off Blade Utility Knife Retractable blade with 2-piece positive lock. High-impact polystyrene. 1 blade included.


9MM SNAP-OFF UTILITY KNIFE WITH 30° DETAIL BLADE9 points per blade.

420469mm Snap-Off Blade Utility Knife with 30° BladeStainless steel knife specifi cally designed for detail work with a 30° angled blade for precision cutting. Autolock withstands 17 pounds of force without blade retracting.


Snap-Off Utility KnivesReplacement Blades

4236025mm Snap-Off Blades 5-Pack7 points per blade. *Carded, 0.2lb, 12pk


4235518mm Snap-Off Blades 10-Blade DispenserReusable dispenser holds 10 blades. 8 points per blade. *Carded, 1.9lb, 10pk

4235718mm Snap-Off Blades 10-Blade Dispenser with Used Blade StorageReusable dispenser holds 10 blades. Used blade storage for safe disposal. 8 points per blade. *Carded, 2.7lb, 10pk

4235918mm Snap-Off Blades 50-Blade DispenserReusable dispenser with hang hole holds 50 blades. 8 points per blade.



423569mm Snap-Off Blades 10-Blade Dispenser with Used Blade StorageReusable dispenser with hang hole. Used blade storage for safe disposal. 13 points per blade. *Carded, 1.1lb, 10pk

423509mm 30° Snap-Off Replacement Blades 5-PackFor use with HYDE® #42046 9mm knife. 8 points per blade. *Carded, 0.03lb, 10pk

423519mm 30° Snap-Off Replacement Blades 10-PackFor use with HYDE® #42046 9mm knife. 8 points per blade. *Carded, 0.07lb, 10pk

34

Utility Knives and Blades

35

Top Slide Utility Knives

42081MAXXGRIP® Top Slide Utility KnifeTop-of-the-line utility knife has 4 blade positions. Overlap nose for blade support. Change blade without tools. 1 heavy-duty blade included. *Carded, 3.0lb, 5pk

42083MAXXGRIP® Angle Head Top Slide Utility Knife3 lockable blade positions. Offset head for leverage and overlap nose for blade support. Change blade without tools. 1 heavy-duty blade included. *Carded, 2.8lb, 5pk

42020Front-Loading Utility Knife3 blade positions with top-slide control. Push-button blade change requires no tools. Built-in notch cuts string without exposing blade. Blade storage in handle. 3 heavy-duty blades included. *Carded, 1.5lb, 5pk

42074Red Powder-Coated Top Slide Utility Knife9 blade positions. 1 heavy-duty blade included. *Carded, 2.0lb, 5pk

42075Silver Powder-Coated Top Slide Utility Knife9 blade positions. 1 heavy-duty blade included. *Carded, 2.0lb, 5pk

42070Top Slide Utility Knife3 blade positions. Gray textured zinc alloy body with overlap nose for blade support. 1 heavy-duty blade included.

*Carded, 2.3lb, 5pk

42025Mini Top Slide Utility KnifeLightweight, pocket-size knife with 3 blade positions. *Carded, 0.8lb, 10pk

42026Mini Top Slide Utility Knife Blades 5-PackReplacement blades for Mini Top Slide Utility Knife (#42025). *Carded, 0.2lb, 10pk

Fixed Blade Utility Knives

42090Heavy-Duty Fixed Blade Utility KnifeKnurled metal handle for positive grip. Over-lap nose for blade support. 1 heavy-duty blade included. *Carded, 2.0lb, 5pk

42080Angle Head Fixed-Blade Utility KnifeOffset head for greater leverage. Black die cast aluminum alloy with overlap nose for blade support. Change blade without tools. 1 heavy-duty blade included.

*Carded, 2.4lb, 5pk

Carton & Plastic Cutters

42005 Carton CutterMetal frame holds single edge razor. Change blade without tools. 1 blade included.


45730Plastic CutterScore sheet plastic, acrylics and laminated fiberglass, thin copper, and aluminum.


Self-Retracting Safety KnivesMinimally exposed knife blade automat-ically retracts when button is released. For left- or right-handed operation. Use round-tip or standard utility blades.

WAVETECH™

These knives use a new feature that precisely controls the cutting depth by controlling the blade exposure at 1/4", 7/16" or 11/16". “Wave” stops molded into the body of the knife reliably protect the contents of a box being opened or the work surface beneath a product as it"’s cut. Heavy-duty one-piece polypro-pylene body with stainless steel track.

42058WaveTech™ Side-Slide Safety Utility Knife


42059WaveTech™ Top-Slide Safety Utility KnifeIncludes built-in tape cutter.


36

Utility Knives and Blades

Self-Retracting Safety Knives

SWITCHBLADE® METALTop-of-the-line; die cast metal.

42067SwitchBlade® Safety Utility Knife (1/4" blade exposure)1 heavy-duty round-tip blade included.


42062SwitchBlade® Safety Utility Knife (1/16" blade exposure)1 heavy-duty round-tip blade included.


42065SwitchBlade® Safety Utility Knife (1/4" – 7/16" blade exposure)1 heavy-duty round-tip blade included.


SWITCHBLADE® ULTRA LIGHTPolypropylene construction.

42056SwitchBlade® Ultra-Light Utility Knife (1/4" – 7/16" blade exposure)


42060SwitchBlade® Ultra-Light Utility Knife (1/2" blade exposure)


Heavy-Duty Utility Knife Replacement BladesHeavy-duty .025" blades fi t most knives.

42100Utility Knife Blades 5-Pack





*Boxed, 0.9lb, 1pk

ROUND CENTER HOLE

42115Utility Knife Blades 5-Pack / round center holeRound center hole for added compatibility.


ROUND TIP BLADES

42117Round-Tip Utility Knife Blades 5-pack5 heavy-duty .025" blades with rounded tips protect against accidental cuts.


42118Round-Tip Utility Knife Blades 100-pack *Boxed, 1.0lb, 1pk

HOOK BLADESSharpened hooks for ripping linoleum.

42200Utility Knife Hook Blades 5-Pack


42250Utility Knife Hook Blades 100-pack *Boxed, 0.9lb, 1pk

REPLACEMENT BLADE DISPENSERS

Dispenses 1 blade at a time. Designed to be wall hung or fi t in toolbox.

42103Utility Knife Blades / 50-Blade Dispenser *Carded, 6.0lb, 10pk

42101Utility Knife Blades / 100-Blade Dispenser *Boxed, 1.0lb, 1pk

42102Round-Tip Utility Knife Blades / 100-Blade Dispenser

*Boxed, 1.0lb, 1pk

Utility Knife Pouches 42520 Heavy Duty Leather

Utility Knife Pouch Holsters utility knife with blade exposed. Heavy-duty top grain leather with rivet-reinforced construction. 2-1/2"-wide belt slots.

*Carded, 1.6lb, 5pk

42525 Heavy Duty Angle Head

Utility Knife Pouch Holsters angle head utility knife #42080 with blade exposed. Heavy-duty top grain leather with rivet-reinforced construc-tion. 2-1/2"-wide belt slots.

*Carded, 1.6lb, 5pk

37

Trade Knives

BLACK & SILVER® TRADE KNIVES

Guaranteed forever.

22320Black & Silver® Roofi ng KnifeStiff, high-carbon steel blade. Guaranteed forever. *Carded, 0.8lb, 5pk

20550Black & Silver®

Flooring/Roofi ng KnifeHeavy-duty .072" chrome vanadium steel blade, hollow ground to reduce binding. 5° offset angle for cutting leverage. Soft-grip handle with fi nger guard. Guaranteed forever. *Carded, 1.5lb, 5pk

20600Black & Silver® Hose Cutter/All-Purpose Trade KnifeCutting tool for professional trades: automo-tive, ceilings, drywall, fl oor covering, roofi ng and more. Extra heavy-duty .072" thick 440 series stainless steel blade. 5° offset blade angle for cutting leverage. Serrated blade area. Soft-grip handle. Guaranteed forever.

*Carded, 2.0lb, 5pk

60118Black & Silver® Square Point Insulation Knife1" wide, 14-gauge chrome vanadium steel blade. Wave blade design cuts foam core and most other insulation materials without binding. Ergonomically engineered soft-grip handle. Blade measures 8-3/4" x 1" x .083". Guaranteed forever. *Carded, 3.2lb, 10pk

HARDWOOD HANDLE SHORT- AND LONG-POINT TRADE KNIVESHigh-carbon cutlery steel blades; hardened, tempered and honed.

223102" Short-Point Roofi ng Knife


202502-1/2" Short-Point Flooring Knife

*Carded, 1.1lb, 5pk

202002-1/2" Long-Point Flooring Knife

*Carded, 1.1lb, 5pk

203502-1/2" Long-Point Flooring/Drywall Knife

*Carded, 1.3lb, 5pk

206103-1/2" Long-Point Flooring/Drywall Knife


204502-1/2" Long-Point Vinyl Knife

*Carded, 1.5lb, 5pk

HARDWOOD HANDLE TRADE KNIVES

90600Cable Knife 40513-gauge blade with hardwood handle. Blade measures 3-1/4" x 7/8" x .072".


40210Hacking KnifeRugged 1-1/4"-wide blade for general-purpose cutting. Leather handle with triple-rivet construction. 4-1/4" blade length.


40310Potter’s KnifeHigh-carbon 4-1/2" steel knife for pottery and ceramic work. Hardwood handle.


CARPET KNIVES

540202-5/8" 2HB Hawkbill Carpet KnifeHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle.


540403-1/8" 4HB Hawkbill Carpet KnifeHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle.


42095Adjustable Blade Carpet KnifeFully adjustable blade retracts for safety. Offset head for leverage. High-impact plastic. Reversible blades with 4 cutting edges. Change blade without tools. 6 blades included. *Carded, 0.8lb, 5pk

42105Carpet Knife Blades 5-PackReplacement blades for #42095 carpet knife.


42129Carpet Knife Blades 100-PackReplacement blades for #42095 carpet knife.

*Boxed, 0.8lb, 1pk

42700 Hook Knife Sheath Heavy-duty leather sheath with

curved design to hold most hook-style bladed knives. Snap button strap holds knives securely in sheath. *Carded, 1.3lb, 5pk

Sloyd Wood CarvingKnivesExtra-sharp high-carbon steel knife for woodcarving and general purpose cutting. Hardwood handles.

400602-5/8" Sloyd Wood Knife


401603-1/8" Sloyd Knife


Square Point KnivesHardened high-carbon chrome vanadi-um steel blade. Ground and tempered to precise tolerances. Soft-grip handle with built-in fi nger guard to protect fi ngers from cuts.

BLACK & SILVER®

SQUARE POINT KNIVESHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Guaranteed forever.


Square Point Knife15-Gauge 4" x 1" x .072"



Square Point Knife 15-Guage 6" x 1" x .072"



Square Point Knife 15-Gauge 8" x 1" x .072"


HARDWOOD HANDLE SQUARE POINT KNIVES

50050Square Point Knife #1 17-Gauge 2-3/4" x 3/4" x .058"

*Carded, 1.0lb, 10pk50100Square Point Knife #2 17-Gauge 3" x 11/16" x .058"

*Carded, 1.0lb, 10pk50200Square Point Knife #3 17-Gauge 3-1/2" x 3/4" x .058"

*Carded, 1.0lb, 10pk50500Square Point Knife #6 17-Gauge 5” x 1” x .085”


*Carded, 1.1lb, 10pk50400Square Point Knife #4 with Flat Handle 16-Gauge 3-7/8" x 3/4" x .065"


*Carded, 1.3lb, 10pk60030Regular Square Point Knife16-Gauge 2-3/4" x 1" x .065"

*Carded, 1.3lb, 10pk60090Regular Square Point Knife16-Gauge 4" x 1" x .065"






HOLLOW GROUND SQUARE POINT KNIVESHollow grind works for cutting dense materials like foam.

60180Hollow Ground Square Point Knife16-Gauge 4" x 1" x .065"

*Carded, 1.5lb, 10pk60720Hollow Ground Square Point Knife BG14516-Gauge 6" x 1" x .065"

*Carded, 1.5lb, 10pk60750Hollow Ground Square Point Knife BG35216-Gauge 6" x 1" x .065"

*Carded, 1.5lb, 10pk60480Hollow Ground Square Point Knife BG14214-Gauge 4” x 1” x .083”


SQUARE POINT KNIVES WITH SAFETY HANDLESafety guard protects fi ngers.

60120Square Point Safety Knife16-Gauge 4" x 1" x .065"

*Carded, 1.5lb, 10pk60600Square Point Safety Knife16-Gauge 5" x 1" x .065"



60510Square Point Safety Knife14-Gauge 4" x 1" x .083"



38

Trade Knives

39

Industrial Knife HolstersHeavy-duty simulated leather with rivet-reinforced stitched construction. Accepts knives with straight blades up to 6" long.

56500 Industrial Knife Belt Sheath


56505 Industrial Knife Belt Sheath with Snap Belt slots with snap fastener.


Trade KnivesHardened high-carbon chrome vanadi-um steel blade, ground and tempered to precise tolerances. Blade is securely riveted in place with a strong nickel- plated ferrule. Hardwood handle.

BEVEL POINT KNIVES

60300Bevel Point Knife BG26816-Gauge 4" x 1" x .065"


61080Heavy Duty Utility Bevel Point Knife BG26814-Gauge 2" x 1" x .083"For heavy-duty applications.


SHARP POINT KNIVES

55000Sharp Point Knife #1 17-Gauge 3-1/4" x 9/16" x .058"


55050Sharp Point Knife #2 17-Gauge 3-3/4" x 5/8" x .058"


SKIVER KNIVES 61350Flexible Skiver Knife K77019-Gauge 4" x 13/16” x .042" Flexible blade designed to cut rough spots in tire casings. *Carded, 1.0lb, 10pk

55170Thin Skiver Round Point Knife19-Gauge 5-1/8" x 5/8" x .042"


55190Leather Skiver Knife #3 Sole15-Gauge 6-3/4" x 1" x .072"


MCKAY STITCHER KNIVES

53300McKay Stitcher Knife (B)17-Gauge 2-1/8" x 5/8" x .058"

*Carded, 0.9lb, 10pk53360McKay Stitcher Knife (A)15-Gauge 2-3/4" x 3/4" x .072"


V-TRIM KNIVES

66030Straight V-Trim Curved Tip Knife H212 16-Gauge 3-1/2" x 3/4" x .065"

*Carded, 1.3lb, 10pk66090Offset V-Trim Knife H22216-Gauge 3-1/2" x 3/4" x .065" Trim large mold flush from plastic and rubber goods. *Carded, 1.5lb, 10pk

66330Straight V-Trim Knife 3787A16-Gauge 3-15/16" x 11/16" x .065"


66060Straight V-Trim Knife 21316-Gauge 4" x 1" x .065"


65060Offset Pin Vent Trimmer Knife H1357 16-Gauge 5" x 1" x .065" Offset blade has 5 sharp grooves.


HOOK KNIVES

67090Hook Knife BG39A 14-Gauge 3-3/8" x 5/16" x .083" Sharp V-ground hook.


67150Hook Knife BG101 14-Gauge 4" x 9/16" x .083"


61260Taper Point Knife H2T 16-Gauge 4" x 11/16" x .065" Sharp, thin blade to ream out ragged cuts in tire casings. *Carded, 1.0lb, 10pk

55500English Shoe Knife #2 17-Gauge 4-2/8" x 7/8" x .058"


55300Paris Curve Knife #1

17-Gauge 3-1/4" x 9/16" x .058" *Carded, 1.0lb, 10pk

67830Straight Single Ply Knife K422, .062" Notch 16-Gauge 3-1/8" x 1/2" x .065" Prodder knife with hand-filed notches.


Specialized Mill KnivesHardened high-carbon chrome vanadi-um steel blade, ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted in place with compression cutlery rivets.

61770Heavy Duty Mill Knife H404 14-Gauge 4" x 1-1/4" x .083" Used for heavy-duty applications.


60870Special Square Point Knife BG50 14-Gauge 8" x 1" x .083" Smooth 7" hardwood handle.


Mill BladesHigh-carbon chrome vanadium steel blade. Hardened, tempered, ground and honed to precise tolerances for every cutting job.

BEVEL POINT HSS STEELEXTENSION BLADESBest steel for high heat and tough cutting applications.

57200Bevel Point HSS Steel Extension Blade #218-Gauge 4-3/4" x 3/8" x .049"

*Carded, 0.3lb, 10pk57230Bevel Point HSS Steel Extension Blade 6522M 18-Gauge 4-3/4" x 3/8" x .049"


BEVEL POINT EXTENSION BLADES

57060Bevel Point Extension Blade #2 20-Gauge 4-3/4" x 3/8" x .035"

*Carded, 0.3lb, 10pk57090Bevel Point Extension Blade #2 18-Gauge 4-3/4" x 3/8" x .049"

*Carded, 0.3lb, 10pk57170Bevel Point Extension Blade BG349 18-Gauge 4-3/4" x 3/8" x .049"


CURVE POINT EXTENSION BLADES

57320Curve Point Extension Blade #1 20-Gauge 4-3/4" x 3/8" x .035"

*Carded, 0.3lb, 10pk57380Curve Point Extension Blade #2 20-Gauge 4-3/4" x 3/8" x .035"


FLAT GRIND MILL BLADES

62030Flat Grind Mill Blade 08016-Gauge 6" x 9/16" x .065"

*Carded, 0.5lb, 10pk62090Flat Grind Mill Blade 08115-Gauge 6" x 5/8" x .072"



*Carded, 0.8lb, 10pk62330Flat Grind HSS Mill Blade 08715-Gauge 6" x 5/8" x .072"


62420Flat Grind Mill Blade 08815-Gauge 6-1/2" x 3/4" x .072"

*Carded, 0.8lb, 10pk62450Flat Grind HSS Mill Blade 08815-Gauge 6-1/2" x 3/4" x .072"


*Carded, 1.0lb, 10pk62810Flat Grind HSS Mill Blade 5532M15-Gauge 6-3/8" x 3/4" x .072"

*Carded, 1.0lb, 10pk62660Flat Grind Mill Blade BG2015-Gauge 6-1/2" x 3/4" x .072"

*Carded, 0.4lb, 10pk62720Flat Grind Mill Blade BG71A15-Gauge 6-1/2" x 3/4" x .072"

*Carded, .91lb, 10pk63020Flat Grind HSS Mill Blade 454612-Gauge 3" x 5/8" x .109"

*Carded, 3.3lb, 100pk62930Flat Grind HSS Mill Blade BG77M12-Gauge 3-7/8" x 9/16" x .109"


BEVEL GRIND MILL BLADES

62875Bevel Grind HSS Mill Blade 3551M17-Gauge 5-1/2" x .690" x .058"

*Carded, 0.5lb, 10pk62630Bevel Grind HSS Mill Blade BG183M 16-Gauge 6-1/2" x 3/4" x .072"

*Carded, 0.3lb, 10pk62360Bevel Grind Mill Blade 08715-Gauge 6" x 5/8" x .072"

*Carded, 0.5lb, 10pk62600Bevel Grind HSS Mill Blade BG182M 15-Gauge 6-1/2" x 3/4" x .072"

*Carded, 0.5lb, 10pk62750Bevel Grind Mill Blade BG5715-Gauge 6-1/2" x 3/4" x .072"

*Carded, .61lb, 10pk

40

Trade Knives

41

62460Double End HSS Mill Blade15-Gauge 5" x 3/4" x .072"Double-ended blade for faster changeover to sharp blade. *Carded, 0.5lb, 10pk

62900Bevel Grind HSS Mill Blade3551M 15-Gauge 5-1/2" x .690" x .058"


HOOK MILL BLADES

67450Double End Hook Blade Extension Blade 4502M 22-Gauge High-Speed Steel 4" x 3/8" x .035" *Carded, 0.3lb, 10pk

67390Double End Hook Blade Extension Blade 6520 20-Gauge 4" x 3/8" x .035"

*Carded, 0.3lb, 10pk67240Hook Mill Blade BG448A16-Gauge 6-3/8" x 5/8" x .065"


66360Double End V-Cut Trim Knife Blade BG391 18-Gauge 5" x 3/8" x .049"


57470Sharp Point Extension Blade #218-Gauge 4-4/3" x 3/8" x .049"


57600Lance Point Extension Blade #2 18-Gauge 4-4/3" x 3/8" x .049"


Industrial Mill Blade Handles

63170Wood/Aluminum BG15 Mill Blade Handle for 3/8" Blade


MAXXGRIP PRO® MILL BLADE HANDLESLightweight die cast alloy body construction. Ergonomically engineered soft-grip handle for less user fatigue. Slotted set screw length adjustment.

63055MAXXGRIP PRO® Mill Blade Handle for 9/16" and 5/8" Blades

*Carded, 2.3lb, 10pk63085MAXXGRIP PRO® Mill Blade Handle for 5/8" and 3/4" Blades

*Carded, 2.3lb, 10pk63175MAXXGRIP PRO® Mill Blade Handle for 3/8" Blade


FLAT-SIDED WOOD EXTENSION BLADE HANDLESFlat-sided hardwood handles for 5/16" and 3/8" mill blades.

57630 (2SR)4-1/2" Flat-sided Wood Extension Blade Handle

*Carded, 1.3lb, 10pk57660 (12LR)4-3/4" Flat-sided Wood Extension Blade Handle

*Carded, 1.5lb, 10pk57680 (2L)4-3/4" Flat-sided Wood Extension Blade Handle


57620 (1R)5-1/4" Flat-sided Wood Extension Blade Handle


Butcher KnivesHigh-carbon steel blades; hardened, tempered, ground and honed. Blade is triple riveted to a comfortable hard-wood handle.

HEAVY-DUTY 15-GAUGE BLADE

680306" Butcher Knife 506 Blade measures 6" x 1-1/5" x .072".

*Carded, 1.8lb, 5pk680608" Butcher Knife 508Blade measures 8" x 1" x .072".

*Carded, 2.0lb, 5pk


6809010" Butcher Knife 510Blade measures 10" x 1-5/8" x. 095".

*Carded, 3.0lb, 5pk6812012" Butcher Knife 512Blade measures 12" x 1-5/8" x .095".

*Carded, 3.8lb, 5pk


6818014" Butcher Knife with Guard 514Blade measures 14" x 1-7/8" x .109".

*Carded, 5.3lb, 5pk

6830014" Safety Butcher Knife 314Round end protects workers’ feet from accidental drops. Heavy steel shield protects fingers. Sharp, semi-hollow ground 12-gauge blade measures 14" x 1-3/4" x .109".

*Carded, 6.0lb, 5pk

01040 301140 401150 301240 401340 401440 401540 4, 2101550 4, 2101740 4, 2101750 4, 2101840 4, 2101850 4, 2101870 201940 2101945 21 01955 2101970 202000 402005 402050 502070 502080 602100 402102 402150 502200 502205 502215 602250 402300 502320 602350 402352 402355 402400 502420 602500 402550 4, 2202565 502568 502570 4, 2202600 5, 31

02700 2302701 2302750 4, 2202770 4, 2202850 4, 2202852 4, 2202870 4, 2202872 4, 2202880 2202890 2202895 2202950 3302970 202975 202980 202990 2202995 2202996 2404060 604101 604124 2604126 2604151 604352 604401 604701 6, 2304851 6, 2304971 205510 705520 705530 705532 2605534 2605540 2205550 2205560 2305570 2205610 705615 7, 2306081 606101 506107 3

06108 306151 606158 306221 606222 506228 306257 306258 306308 306321 606351 506357 306358 306401 606408 306421 606557 3, 20 06571 6, 2206577 2206578 3, 2106579 3, 3106757 3, 2006771 6, 2206778 3, 2106857 3, 2006872 6, 2206878 3, 2106879 2206881 2106882 2106888 2206889 2206920 206971 206985 206986 206988 206992 207010 507060 507110 507160 5

07210 507360 507410 507745 507760 5, 2207860 5, 2207880 2207890 2207975 209007 1009008 1009012 2409014 2409016 35, 4109034 2409037 1009039 2509046 1709047 1709048 1709049 1709051 1709052 1709054 1709056 1709057 1809059 3009060 2409062 2409065 2409068 2509071 2409072 2409073 2409074 2409075 2409077 4109081 2509082 1709083 1709086 25, 2709090 24

09100 2009105 3009110 2409114 3009157 1809158 2309160 1609165 1609170 1609175 1609180 1609211 1909212 1909213 1909214 1909215 1909223 1909233 1909243 1909244 1909253 1909263 1909273 1909274 1909312 1909313 1909314 1909323 1909333 1909343 1909344 1909353 1909363 1909373 1909374 1909410 2309411 2309425 2309510 2309880 2509885 2509886 43

09891 3109898 1009899 1009902 2309903 1009904 1009905 2309906 2309909 2309910 909911 909914 909915 909916 2309919 1609920 1609921 1609922 1609923 1609925 1609927 1609928 1609933 1709935 1709936 1709937 1709938 1709939 1709940 2309944 1709950 2009960 2009961 2909968 2909969 2909971 2909972 1609977 1609980 2509983 2509985 2409986 24

42

Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s)

43


09997 2509998 2510400 910410 910420 910450 910500 710510 710520 710530 810540 810550 810600 710610 710620 710630 1211000 811050 811100 811120 811125 811130 811135 811150 811160 711170 711171 711172 711180 711200 912000 8, 2812010 8, 2812040 912050 8, 2812055 9, 2812060 8, 2812070 8, 2812072 8, 2813000 3213010 3213020 3313030 33

13040 3213045 3213050 3213065 3313070 3313080 3313110 3313120 3313125 3313127 3313135 3313138 3313140 3313145 3318000 3018040 3018050 3018060 3018080 3018090 3018095 3018100 3018110 3018170 3018400 27, 3018520 2018550 2018555 2018600 2019030 2619032 2619040 2619041 2619050 2619060 2619062 2619063 2619065 2619066 2619067 2619070 2619090 26

19100 2619110 2619120 2619200 2819205 2819400 2719402 2719403 2719408 2719410 2719423 2819424 2819425 2819430 2819440 2819450 2819451 2819452 2819453 2819460 1519600 2719620 2719640 2719660 2720200 27, 3720250 27, 3720350 27, 3720450 27, 3720550 27, 3720600 27, 3720610 27, 3722310 3722320 3728000 1428010 1428020 1428030 1428040 1428050 1428060 1428070 1428100 14

28260 1328270 1328430 1228440 1228450 2228470 1228476 1228670 1328680 1328690 1328700 1328710 1328715 1328720 1328730 1328735 1828740 1328760 1330100 3230120 3230122 3230160 3230250 3231550 3233095 3133100 3133110 3133120 3133150 3133170 3133210 3133250 31, 33 33255 31, 3334015 3235600 3235789 3240060 3840160 3840210 3740310 3741010 1541060 15

41110 1542005 3542020 3542025 3542026 3542027 3442030 3442035 3442036 3442045 3442046 3442047 3442050 3442051 3442056 3642058 3542059 3542060 3642062 3642065 3642067 3642070 3542074 3542075 3542080 3542081 3542083 3542090 3542095 3742100 3642101 3642102 3642103 3642104 3642105 3742115 3642117 3642118 3642129 3742150 3642200 3642250 36

42330 3442345 3442350 3442351 3442352 3442355 3442356 3442357 3442359 3442360 3442520 3642525 3642700 3743420 1443430 1443440 1443460 1443470 1543510 1443620 3943630 3943640 2943660 2943670 9, 2944250 2044280 1545000 1445005 1445042 1545050 1545110 1545115 1545200 1545310 1845320 1845350 1845360 1845375 1845390 1845395 1845400 1045450 10

44

45600 1545610 1545700 3345730 3545760 3345805 14, 3245807 14, 3245808 3245810 14, 3245815 3245820 1445850 1445950 1545960 1545970 1546310 2946400 2946410 2946420 2946435 2946445 1546455 1546482 2946484 2946540 3146555 3146560 3146565 3146630 11

46640 1146650 1146660 1146750 3246800 1146801 1146802 1146804 1546805 1146806 1546807 2746809 1546810 1146811 1146812 1146813 1146830 1046831 1046832 1046833 1046834 1046835 1046837 1146838 1046840 1046841 1046842 1046843 1146846 11

46847 1146850 1147050 1547100 3150050 3850100 3850200 3850350 3850400 3850450 3850500 3853300 3953360 3954020 3754040 3755000 3955050 3955170 3955190 3955300 3955500 3956500 3956505 3957060 4057090 4057170 4057200 4057230 4057320 40

57380 4057470 4157600 4157620 (1R) 4157630 (2SR) 4157660 (12LR) 4157680 (2L) 4160030 3860090 3860102 3860110 3860115 3860118 3760120 3860180 3860300 3960450 3860480 3860510 3860570 3860600 3860630 3860660 3860720 3860750 3860780 3860810 3860870 4061080 39

61260 3961350 3961770 4062030 4062090 4062180 4062300 4062330 4062360 4062420 4062450 4062460 4162480 4062600 4062630 4062660 4062720 4062750 4062810 4062875 4062900 4162930 4063020 4063055 4163085 4163170 4163175 4165060 3966030 39

66060 3966090 3966330 3966360 4167090 3967150 3967240 4167390 4167450 4167830 3968030 4168060 4168090 4168120 4168180 4168300 4190600 37


For a better fi nish,start online at hydetools.com

The HYDE® website is completely updated.Your online experience will be

easier, faster and more enjoyable

with a redesigned layout, simpler

navigation, and more features

tailored specifi cally for the pro.

We’ve made purchasing tools

easier, too. Visit hydestore.com

or amazon.com/hyde.

Hyde Tools, Inc. A Hyde Group Company

54 Eastford Road, Southbridge, MA 01550-1875

www.hydetools.com

800-872-4933 / FAX 508-765-5250

E-mail [email protected]

Hyde Tools, Inc. is a strong industry supporter and a member of these organizations:American Hardware Manufacturers Association / American Knife Manufacturing Association /

Associated Industries of Massachusetts / Association for Manufacturing Excellence / Central Massachusetts Employees Association / Hand Tools Institute / Home Improvement Research Institute (HIRI) /

Industrial Supply Association In-Store Marketing Institute / National Guild of Professional Paperhangers, Inc. / National Tile Contractors Association / Paint Contractors Association / Specialty Tools and Fasteners Distributors

Association (STAFDA) / Wallcoverings Association / Worldwide Do-It-Yourself Council

AnglePRO®, Black & Silver®, Hammer Head®, HYDE®, MAXXGRIP®, MAXXGRIP PRO®, Mudslinger®, Pail Popper®, PivotJet®, ProShield®, RVT Rapid Valve Transfer®, SwitchBlade® and QuickReach®

are REGISTERED TRADEMARKS of Hyde Tools, Inc. DELTA™, Mini Guide™, Pro Project™, Pro Stainless™, Super Guide™, SuperFlexx™, Value Series™, ProWood™

and Red Star™ are TRADEMARKS of Hyde Tools, Inc. Bear Claw™, Caulk-Away™, Caulk-Rite™, ClawGrip®, Corner Ease®, Painter’s Pyramid®, Quickly Clean™,

and Wet & Set® are trademarks and non-registered trademarks in use under license by Hyde Tools, Inc.

©2020 Hyde Tools, Inc. All rights reserved.

Documents

Hyde catalog 2020 final - Hyde-Tools | For a better finish, start ...2 Painters’ Multi-Tools 17-in-1 Painter’s Tool Carbon Steel Multi-Tool Overmold handle with a thumb stop for