Upload
hamstermaner
View
68
Download
4
Embed Size (px)
Citation preview
1 Introduction ..................................................................................................................................... 2
2 Adjust HRPAD Model ....................................................................................................................... 3
2.1 PL ESS ....................................................................................................................................... 3
2.2 CZ ESS ...................................................................................................................................... 7
1 Introduction
This document describes how to adjust HRPAD model in order to add HX-CEE country specific nodes
for PL and CZ ESS.
2 Adjust HRPAD Model
Run transaction GENIL_MODEL_EDITOR and change component HRPAD.
2.1 PL ESS
2.1.1 Create dependent object IT0002_46, set attributes according next picture and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_PL_R0002
Root Object PERNR
Super Object IT0002_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X
2.1.2 Create dependent object IT0006_46 with following attributes and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_PL_R0006
Root Object PERNR
Super Object IT0006_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X
2.1.3 Create dependent object IT0009_46 with following attributes and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_PL_R0009
Root Object PERNR
Super Object IT0009_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X
2.1.4 Create dependent object IT0021_46 with following attributes and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_PL_R0021
Root Object PERNR
Super Object IT0021_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X
2.1.5 Create dependent object IT0413, set attributes according next picture and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_PL_R0413
Root Object PERNR
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Default values supported
Direct Create Requested X
2.1.6 Create relation for object IT0413, set attributes according picture and press Save button.
2.2 CZ ESS
2.2.1 Create dependent object IT0002_18, set attributes according next picture and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_CZ_R0002
Root Object PERNR
Super Object IT0002_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X
2.2.2 Create dependent object IT0006_18 with following attributes and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_CZ_R0006
Root Object PERNR
Super Object IT0006_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X
2.2.3 Create dependent object IT0009_18 with following attributes and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_CZ_R0009
Root Object PERNR
Super Object IT0009_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X
2.2.4 Create dependent object IT0021_18 with following attributes and press Save button.
Key Structure Name HRPAD_S_MAIN_RECORD_KEY
Attribute Structure Name HCMT_BSP_PA_CZ_R0021
Root Object PERNR
Super Object IT0021_NN
Dynamic Modify Check Statically Supported
Dynamic Delete Check Dynamically Supported
Dynamic Create Data Not Supported
Direct Create Requested X