Embed Size (px)
Citation preview
CHOKE & KILL MANIFOLD
Choke Manifold
Choke manifold is a pressure
control equipment used to control
well pressure and prevent well
flowing and blowing out.
Our choke manifold products
comply with API 16C specifications
and operate between the pressure
ranges of 2,000 psi ~ 15,000 psi.
Standard SY/T5323-2004, API Spec 16C
Working Pressure 2,000 psi ~ 15,000 psi
Temperature Class L-U (-46℃~+121℃)
Specifications
www.hwayoo.com, [email protected] © 2016 Hwayoo Petroleum. All rights reserved.
Performance Requirement PR1, PR2
Product Specification Level PSL3
Material Class EE, FF
Working Medium Mud, crude oil, H2S gas
ModelWorking Pressure
Inlet Bore Outlet Bore Flow Control
JG-21 3,000 psi 3-1/8" - 3K 3-1/8" - 3K Manual + Hydraulic
JG-35 5,000 psi 3-1/8" - 5K 3-1/8" - 5K Manual + Hydraulic
JG-70 10,000 psi 3-1/8" - 10K 3-1/8" - 5K Manual + Hydraulic
JG-105 15,000 psi 3-1/8" - 15K 3-1/8" - 10K Manual + Hydraulic
Technical Data
Kill Manifold
Kill manifold is a pressure control equipment
used to control well pressure and prevent
well flowing and blowing out while killing the
well with kill fluids pumped through kill
manifold into the well.
Our kill manifold products comply with API
16C specifications and operate between the
pressure ranges of 2,000 psi ~ 15,000 psi.
Standard SY/T5323-2004, API Spec 16C
Working Pressure 2,000 psi ~ 15,000 psi
Specifications
CHOKE & KILL MANIFOLD
www.hwayoo.com, [email protected] © 2016 Hwayoo Petroleum. All rights reserved.
Working Pressure 2,000 psi ~ 15,000 psi
Temperature Class P-U (-29℃~+121℃)
Performance Requirement PR1, PR2
Product Specification Level PSL3
Material Class EE, FF
Working Medium Mud, crude oil, H2S gas
Technical Data
Model Working Pressure Inlet Bore Outlet Bore
YG-21 3,000 psi 2-9/16" - 3K 3-1/8" - 3K 2-9/16" - 3K 3-1/8" - 3K
YG-35 5,000 psi 2-9/16" - 5K 3-1/8" - 5K 2-9/16" - 5K 3-1/8" - 5K
YG-70 10,000 psi 2-9/16" - 10K 3-1/16" - 10K 2-9/16" - 10K 3-1/16" - 10K
YG-105 15,000 psi 2-9/16" - 15K 3-1/16" - 15K 2-9/16" - 15K 3-1/16" - 15K
