Upload
others
View
1
Download
1
Embed Size (px)
Citation preview
HVIA STRIPPERStripping tool for cable screens and primary insulation for cable diameters from 35 to 150 mm
Energy Division
Locating hole for blade
Handle to adjust spindle to cable diameter
Blade EXRM-0982-I-22.5 for removing primary insulation
Setting screw to adjust cutting depth of blade for removing primary insulation
Locking screw for cable insulation blade
Adjustable rollers (2 positions)
Blade EXRM-0982-R-20-4 for removing bonded cable screen
Locking screw for cable screen blade
Setting screw to adjust cutting depth of blade for chamfering the semi-con screen at screen transition
Fixed handle
Loosen locking screw to adjust blade to desired cutting depth.
Loosen locking screw to adjust blade to desired cutting depth.
Adjust rollers to cable diameter until they are in contact with the bonded screen.
Max cable diameter
Min. cable
diameter
Notes:The tool is supplied with blades packed separately in the case.
The cable must be aligned at right angles to the stripper tool.
Apply a thin layer of silicone lubricant to the bonded screen for easy movement.
The tool should be operated only by people trained in handling this type of tool.
The stripping blade is adjustable.
Coarse adjustment: Remove locking screw and reposition blade.
Fine adjustment: Loosen locking screw to adjust blade to desired cutting depth via the setting screw.
Tyco Electronics Corporation8000 Purfoy RoadFuquay Varina, NC 27526-9349Tel: 800.327.6996Fax: 800.527.8350E-mail: [email protected]://energy.tycoelectronics.com/www.tycoelectronics.com
© 2007 Tyco Electronics Corporation. All rights reserved.7-1773447-4 E270 8/07
All of the above information, including drawings, illustrations and graphic designs, reflects our present understand-ing and is to the best of our knowledge and belief correct and reliable. Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance of any particular quality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for these products is set forth in our standard terms and conditions of sale. ShrinkMark, Insta-Mark, Raychem, TE logo and Tyco Electronics are trademarks.
Energy Division – a pioneer in the development of economical solutions for the electrical power industry. Our prod-uct range includes: Cable accessories, connectors & fittings, electrical equipment, instruments, lighting controls, insu-lators & insulation enhancement and surge arresters.
Ordering InformationPart Number Cable DiametersHVIA-Stripper 35/90-US 35mm - 90mmVVIA-Stripper 75/150-US 75mm - 150mm