Hughes Electronics 2014 catalogue - Cellular Telecom Section

8/12/2019 Hughes Electronics 2014 catalogue - Cellular Telecom Section

1/11

39

Cellular Telecom

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

[email protected]

Hughes Electronics are a centre of excellencein passive communication product design andmanufacture.

Our business stream includes the seamless designand development process and the J.I.T. supply ofcables, connectors, pre-terminated channels, crossconnects, jumper leads, looms and kits including

passive inter-media modulation products, we canalso provide turnkey integration. A small exampleof our range of cellular products are listed below.

CORRUGATED LOW LOSS CABLES 41

JUMPER CABLES 42

CONNECTORS - 7/16

CONNECTORS - N-TYPE 43

AISG RET CONTROL CABLES 44

Cellular Telecom

DUST CAPS 42

43

WAVEWAYTM 40

FREEWAY 40

45POWER CABLES

BREAKERS & SPDs

46

DIRECTIONAL COUPLERS

45

POWER DIVIDERS & SPLITTERS

46

DIPLXERS & TRIPLEXERS 47

BALUNS 47

ANTENNAS 48

ATTENUATORS 48

ACCESSORIES 49


2/11

40

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

[email protected]

Cellular Telecom

Ultra Low PIM Connectivity

Based on Hughes Ultra Low PIM 'WaveWay' Connector series the 'FreeWay' is a Super Low

PIM series of jumper leads designed for use in cellular applicaons.

FreeWay jumper cables are conferred with all the benefits of the WaveWay series of

connectors, they create a step-change in jumper lead efficiency.

42% of PIM is caused by tradional jumper leads and 90% of all those problems spring

from signal transion points between cable and connector interfaces. These problems

significantly decrease Signal to Noise Rao and effecve transmission rates.

FreeWay jumper cables provide a clean, none suscepble, ultra-low resistance signal path

designed to help increase effecve data rates.

FreeWay jumper cables can be supplied factory configured or in a site configurable kit that

provides simple, bespoke IP68 Ultra Low PIM jumpers within 3 minutes, me aer me.

replace XX with length required. i.e 02 for 2M

An advanced design for Next Generaon applicaonsHughes innovave new connector system, The 'WaveWay, is a step change in

the fight against PIM. These ground breaking connecons deliver a simple PIM

migang, low torque, bespoke field terminaon that is IP68 rated and legacy

compable to the standard 7/16 interface.

The WaveWay is a PIM neutral low loss connector that has the ability to

'draw' reverberaon based PIM from the system.

The radical non-metal carcass reduces suscepbility to interference, dampens

noise and hosts Hughes' ground breaking innovaon, The WaveWay; a

superbly engineered wave formed screen which sets a new standard in

terminaon stability and return path efficiency.

TM

Zero Corrosion Zero Harmonics

Zero Magnecs

Zero micro phonics

Dampens vibraon noise

HydroPhobic

Ultra low signal resistance

No parallel paths signals

Non suscepble

No metal oxide Juncons

No capacive couplings

Low torque, Hand Terminabilty

Hughes Part Number Description

Male Female Right Angle Male

08-RFULP01401 08-RFULP01402 08-RFULP01403 Ultra Low PIM 7/16 connector to suit 1/4 inch Superflex



08-RFULP07801 08-RFULP07802 08-RFULP07803 Ultra Low PIM 7/16 connector to suit 7/8 inch flex08-RFULP11401 08-RFULP11402 08-RFULP11403 Ultra Low PIM 7/16 connector to suit 1 1/4 inch flex

Sets a new standard in

return path efficiency

PATENTED

Hand torque-able

Superior signal transit

Vibraon dampening


1/2 Super Flex25-RFULP7M7M12/XX Super Low PIM 7/16 Straight Male to Male25-RFULP7R7R12/XX Super Low PIM 7/16 Right Angle Male to Right Angle Male25-RFULP7M7F12/XX Super Low PIM 7/16 Straight Male to Female

Super Low PIM Jumper Cables

Light weight

Site configurable

Super Low PIM


3/11

41

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

[email protected]

Cellular Telecom

Feeder cables

Hughes corrugated waveguide cables are high performing low loss cables mainly used in Cellular telecom and Broadcast applicaons.

Benefits of corrugated cables over smooth walled cables are:

Extremely flexible Low Passive Intermodulaon (PIM)

Managed thermal expansion

Available in many sizes with standard polyethylene PE sheath or flame retardant Low Smoke Zero Halogen (LSZH)

Hughes feeder cables are widely used in telecom applicaons. Mainly used to run RF

signals and power up Towers and Masts to feed Antennas. Hughes feeder cables offer

lowest aenuaon at high frequencies while maintaining excellent electrical

characteriscs

SuperFlexible cables

HLR cables


Standard PVC LSZH19-RF31301951 19-RF31301952 HLR 195 Ultraflex

19-RF31302401 19-RF31302402 HLR 240 Ultraflex

19-RF31314001 19-RF31314002 HLR 400 Ultraflex

Hughes Superflexible cable offers excellent return loss performance, used with Hughes

Ultra Low PIM Waveway Connectors results in the best preforming assemblies in todays

market.

Other connectors available for these cables are : N Types, Standard 7/16th

Hughes HLR cables are equivalent to Andrews LMR cables. Hughes HLR cables offer high

performance and flexibility in 50 ohm.

Connectors available for these cable include SMA, SMB, BNC, N Types and 7/16th


Standard PVC LSZH

19-RF31101401 19-RF31101402 1/4 inch Superflex




Standard PVC LSZH

19-RF31201201 19-RF31201202 1/2 inch Flex

19-RF31207801 19-RF31207802 7/8 inch Flex

19-RF31211401 19-RF31211402 1 1/4 inch Flex

Corrugated Low Loss Cables


4/11

42

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

[email protected]

Cellular TelecomJumper Cables

Hughes super flexible low PIM jumper cables are specially designed for GSM and

CDMA base staons, manufactured to crical standards of excellence and adopng the

best mechanical principles for radio frequency and reliability performance each

assembly undergoes two VSWR test processes during manufacture to ensure

outstanding PIM performance.

Excellent VSWR and PIM performance (-162dBc typical)

Low stable IM3 distoron

Designed for outdoor applicaon

IP68 water immersion tested transversely and longitudinally


1/4 3/8 1/225-RF507M7M14/XX 25-RF507M7M38/XX 25-RF507M7M12/XX 7/16 Straight Male to Male25-RF507R7R14/XX 25-RF507R7R38/XX 25-RF507R7R12/XX 7/16 Right Angle Male to Right Angle Male25-RF507M7F14/XX 25-RF507M7F38/XX 25-RF507M7F12/XX 7/16 Straight Male to Female25-RF50NMNM14/XX 25-RF50NMNM38/XX 25-RF50NMNM12/XX N Type Straight Male to Male25-RF50NRNR14/XX 25-RF50NRNR38/XX 25-RF50NRNR12/XX N Type Right Angle Male to Right Angle Male25-RF50NMNF14/XX 25-RF50NMNF38/XX 25-RF50NMNF12/XX N Type Straight Male to Female


Dust CapsHughes Electronics advanced Ingress excluding cover for 7/16 connectors is an

IP68 rated cap with a built in humidity indicator to alert implementers to thepresence of humidity.

Hughes IP68 ingress prevenon cap incorporates an ingenious built in humidity

indicator* that stops dust, grime and water in its tracks and alerts you to the

amount of humidity in the connector mang area.

Transparent cap with humidity indicator

Lightweight

IP68 rated

Easily fied (no tools needed)

Rugged construcon

*also available with silica sachets to absorb humidity


07-930F1131 IP68 Transparent Protective Cap For 7/16 Female

07-93011132 IP68 Black plastic Protective Cap For 7/16 Female

07-930E1112 IP68 Metal Protective Cap For 7/16 Female


5/11


6/11

44

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

[email protected]

Cellular Telecom

AISG RET Control Cables


25-9R42BR221/0.5 RET (AISG) Lead 8 pin Male to Female Moulded 0.5M25-9R42BR221/01 RET (AISG) Lead 8 pin Male to Female Moulded 1M25-9R42BR221/02 RET (AISG) Lead 8 pin Male to Female Moulded 2M25-9R42BR221/02.5 RET (AISG) Lead 8 pin Male to Female Moulded 2.5M25-9R42BR221/03 RET (AISG) Lead 8 pin Male to Female Moulded 3M

Moulded Cable assemblies

Component Parts for Mechanical assemblies

Hughes PartNumber

Description

12-3A124111 8 Pin RET Connector Male12-3A134111 8 Pin RET Connector Female20-RT220126 6 Conductor AISG RET cable

Unique IP68 rated Remote Electrical Tilt (RET) control cables

Hughes RET control cables are compable with Antennae InterfaceStandards Group (AISG) requirements and designed especially for

harsh and confined cellular telecom environs.

Incorporang slim line moulded strain relief boot for easy installaon

and opmum signal performance in ght spaces and stress condions

Hughes RET control cables facilitate quick and opmised adjustment of

Remote Electrical Tilt (RET) component systems.

Fully compliant with AISG EIA-485 Layer 1 systems, Hughes RET control

cables are designed for exceponal ingress performance; fully IP68

rated and developed to feed data and power from the controller to RET

system components in exacng outdoor environments.

Key Features:

Slimline strain relief for opmal signal performance in

constricted condions

Exceponal IP68* ingress rang

Operates in up to 100% humidity

AISG and FS1 Din style compable

*Unique Feature

Applicaons:

Remote Electrical Tilt (RET) applicaons

AISG compliant antenna control units Tower mount amplifiers with AISG interface

Control Network interfaces with AISG interface


7/11

45

[email protected]

Cellular Telecom

Hughes offers a full range of power cables including Armoured cable, Panel Cable, SY

Control Cable, YY Control Cable, 3183Y Flexible cable, Tri-Rated cable, Double

Insulated cable and Rubber Flex cable. All power cables supplied by Hughes areindependently tested and conform to the relevant BS standards. Most cable types

are available from 0.75mm to 50mm conductor both in single and mulple cores

with the opon of PVC or LSZH sheaths and in various colour opons. Listed below

are the more popular opons but please call our sales team if your requirement is not

listed below.

Power Cable

O MP N G PConductor size mm -Rate d

6381YGNInsulated 6381Y

FJ BS6724

-41015XX -31015XX -SWA-3X1.5 BD-41025XX -31025XX -SWA-3X2.5 BD-4104XX -3104XX -SWA-3X4.0 B

-4106XX -3106XX -SWA-3X6.0 B-4110XX -3110XX -SWA-3X10.0 B-4116XX -3116XX -SWA-3X16.0 B-4125XX -3125XX DB-4135XX -3135XX DB-4150XX -3150XX D.00

Hughes Part Number DescriptionConductor size mmTri-Rated

6381YDoubleInsulated 6381Y

3Core SWABS6724

21-41015XX 21-31015XX 21-SWA-3X1.5 1.5021-41025XX 21-31025XX 21-SWA-3X2.5 2.5021-4104XX 21-3104XX 21-SWA-3X4.0 4.00

21-4106XX 21-3106XX 21-SWA-3X6.0 6.0021-4110XX 21-3110XX 21-SWA-3X10.0 10.0021-4116XX 21-3116XX 21-SWA-3X16.0 16.0021-4125XX 21-3125XX 25.0021-4135XX 21-3135XX 35.0021-4150XX 21-3150XX 50.00

Breakers

Surge Protection Devices

Hughes distribute the Ac 9 range of products manufactured by SchneiderElectrics.

Ac 9 helps you meet developing energy efficiency and environmentalcerficaons or requirements, now and in the future. It minimises impact

from the design stage, through the installaons lifeme of use and eventual

recycling. Through both design and technology, Ac 9 provides you with the

key combinaon of less impact and more efficiency that is necessary for the

environment today. The full range of Ac 9 products are available to view at:-

hp://www.schne ider-e lectr ic .co .uk/documents/e lectr ica l -

Surge Protecon Devices (SPDs) protects electrical installaons against

direct lightning strikes. They are used to conduct the direct lightning current,

propagang from the earth conductor to the network conductors.

Hughes supplies Type 2 SPDs both in the Schneider brand and Hughes own

brand. Available in 1pole + N or 3Pole+N in both 40kA/20Ka High risk or

20kA/5Ka Medium risk variants.


TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434


Schneider Hughes35-MGSPD140 35-HUSPD140 SPD 1P+N 40kA/20kA

35-MGSPD120 35-HUSPD120 SPD 1P+N 20kA/5kA35-MGSPD340 35-HUSPD340 SPD 3P+N 40kA/20kA35-MGSPD320 35-HUSPD320 SPD 3P+N 20kA/5kA


8/11

[email protected]

Cellular Telecom

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

Hughes 7A rated 4 way DC spliers are designed to reconfigure one 48V

power supply to provide 4 individual 48V supplies all connected to

common earth and fused at 1A, safely serving power to mulple pieces of

transmission or other electrical equipment. The convenient and praccal

splier comprises a sturdy bulkhead mountable 17cm X 5cm galvanised

steel hub internally configured to transform a single 48V incoming Direct

Current power supply into 4 x outgoing 48V Direct Current power

supplies. Input connecon to source DC is enabled via 2 metres of DC and

earth Tri-Rated cable fied with the terminaon of your choice, the

outputs are served on 5cm of DC and earth tri-rated cable terminated

with Molex power connectors.

Up-gradeable and Interchangeable Fuses

Reduce Cost and Installaon Time

Single Integrated Unit Soluon

DC Splitters

Hughes PartNumber

Description

35-HE608182 48V 4Way DC Splitter TMO35-HE608183 48V 4Way DC Splitter MEAS

Power Dividers / SplittersPower dividers / spliers are used in a wide variety of applicaons and can

sasfy almost any requirement where a signal needs to be distributed or

combined.

Minimal inseron loss

High isolaon between output ports

Exceponal phase and amplitude balance.


2 Way 3 Way35-PS2W01 35-PS3W01 N Type 700-2700 MHz Power Splitter35-PS2W02 35-PS3W02 N Type 800-2700 MHz Power Splitter35-PS2W03 35-PS2W03 N Type 700-3500 MHz Power Splitter

Directional CouplersDireconal Couplers are passive devices used in the field of radio technology.

They couple a defined amount of the electromagnec power in a

transmission line and provide it to an ancillary port where it can be deployed

in another circuit. An essenal feature of direconal couplers is that they only

couple power flowing in one direcon.

Trimetal plating connectors to reduce PIM

Hughes PartNumber

Description

35-CDS51 N Type 700-2700 MHz 5dB Directional Coupler35-CDS61 N Type 700-2700 MHz 6dB Directional Coupler35-CDS101 N Type 700-2700 MHz 10dB Directional Coupler35-CDS151 N Type 700-2700 MHz 15dB Directional Coupler35-CDS201 N Type 700-2700 MHz 20dB Directional Coupler


9/11

[email protected]

Cellular Telecom

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

Diplexers / TriplexersDiplexers separates or combines a high frequency and a low frequency. The

diplexer incorporates a low pass cutoff frequency below which signals are

routed from the incoming port to the low pass port, and a high pass cutofffrequency above which signals are routed to the high pass port. Available in N

type or 7/16th interfaces with Tri-metal plang, in a range of frequency bands.

Please contact our sales office with your required Lowband and Highband

requirements.

Low inseron loss

High aenuaon

Temperature stability

DDF Baluns

Hughes have improved their dual balun offering to include front and

rear bulkhead mounng. The new versale design, a beaufully

compact balun converts 75 ohm unbalanced coaxial signal to 120 ohm

balanced twisted pairs. The Dual baluns can be used as free standing

unit or be mounted into a panel. The redesign makes it possible to

mount from the RJ45 side or coaxial side allowing either RJ45 or coaxial

Dual Baluns

Hughes Type 20 HDC Type 43 DDF Baluns fit into DDF frames and B2

Blocks, extensively used in Telecom applicaons.

Specificaon:1. Matching Impedance: 75ohm unbalanced coaxial to 120ohm balanced twisted pair

2. Bit Rate: 2Mbit/s and 8Mbit/s - G703

3. Return Loss: > 12dB

4. Inseron Loss: < 1.3dB

5. Cross Talk: > 50dB from 51kHz to 10Mhz between two channels

6. Pulse Shape: 2Mbit/s and 8Mbit/s - G703

7. Isolaon Voltage: 250V DC between input and output


Male Female40-1112 40-1132 Dual Balun BNC40-1212 40-1312 Dual Balun Type 4340-1222 40-1322 Dual Balun HDC Type 4340-1421 40-1422 Dual Balun 1.6/5.6


Male40-1222/DDF Type 20 HDC Type 43 DDF Balun


10/11

[email protected]

Cellular Telecom

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

AntennasHughes offers a full range of Antennas from indoor domed ceiling mount to external

high gain pole mount. All antennas undergo comprehensive environmental and

performance test to ensure that they meet the all relevant standards.

Please contact our sales team with your requirement.


35-AT-0727XDF Indoor Mexican Hat Antenna 3dB Gain35-AT-1007KBO Indoor Panel Antenna 7dB Gain H:90 V:6535-AT-1008KBO Outdoor Panel Antenna 7dB Gain H:85 V:5

High Power 7/16 DIN Attenuators

N Type Attenuators

Hughes aenuators may be used to reduce power where it is needed and

balance out transmission lines that may otherwise have unequal signal

levels.

Hughes high power aenuators are exceponally rugged and remarkably

insensive to environmental consideraons such as temperature and

humidity.

Available with Trimetal plated connectors to migate the effects of PIM

and oxidizaon.

Wide variety of connectors and dB values

Rugged Reliability provides years of trouble free use

Hughes high grade fixed RF Aenuators help lower voltage, dissipates

power and improves impedance matching. Available in various waage

and aenuaon, Hughes low VSWR aenuators provides excellent

efficiency.

Low Inseron Loss

Low DC power Consumpon


2Watt 5Watt35-RF2W01 35-RF5W01 N Type Male to Female Attenuator 3dB35-RF2W02 35-RF5W02 N Type Male to Female Attenuator 6dB35-RF2W03 35-RF5W03 N Type Male to Female Attenuator 10dB

H u g h e s P a r t N u m b e r D e s c r i p ti o n

2 5 W a t t 5 0 W a t t 1 0 0 W a t t

3 5 - R T 0 25 W 0 2 3 5 - R T 0 5 0 W 0 2 3 5 - R T 1 00 W 0 2 7 / 1 6 D I N M a l e t o F e m a l e A t t en u a t o r 6 d B

3 5 - R T 0 25 W 0 3 3 5 - R T 0 5 0 W 0 3 3 5 - R T 1 00 W 0 3 7 / 1 6 D I N M a l e t o F e m a l e A t t en u a t o r 1 0 d B




11/11

49SALES@HUGHESELECTRONICS CO UK

Cellular Telecom

TEL: (44) 020 7378 1400 FAX: (44) 020 7378 1434

Cold Shrink Seals

Rubber Wrap

Amalgamating Tape

Hughes Cold Shrink EPDM seals are open ended Tubular Rubber

sleeves which are factory expanded, pre stretched and assembled

onto a removable core. The insulating tube is made of EPDM rubber

which is free from any Chlorides or Sulphurs. Applications include

field installations in harsh environments, Sealing of joined power

cables up to 1000Volts, Sealing of connectors in mobile towers and

masts.

Excellent weather resistance Ultraviolet aging resistant

Higher embrittlement resistant than heatshrink

Seals tight in harsh environments

Requires no Tools or special training

Waterproof / Sealing class Ip68

Rubber Wrap (T.M) Is a liquid rubber composite designed by Hughes

Electronics especially for protecting metal connectors in harsh exterior

environs such as cellular base stations.

Rubber Wrap is an air drying rubber coating developed by Hughes

Electronics to help isolate RF connections from magnetic and electrical

fields. It can be easily applied by brush or spray and protects coated

connections against moisture, acids, abrasion and corrosion. Isolates RF connecons from PIM sources.

Protects RF connections from moisture abrasions and

corrosion

Absorbs shocks and vibration

Use on any PIM source

Hughes Self-amalgamating tape is a non-tacky silicone-rubber tape which

when stretched and wrapped around cables, electrical joints combines or

unites itself into a strong, seamless, rubbery, waterproof, and electrically

insulating layer.

Heat resistant Sunlight resistant

Weather resistant

Hughes PartNumber

Description

35-HURW001 Rubber Wrap 400ml

* Available in many sizes, please call our sales team for your required size

Hughes PartNumber

Description

35-CS00151 Cold Shrink for N type connections

35-CS00152 Cold Shrink for 7/16th

connections

Hughes PartNumber

Description

27-CR0015 50mm X 10M Self Amalgamated Tape Black27-CR0010 19mm x 33M Black Electrical Tape

Documents

Hughes Electronics 2014 catalogue - Cellular Telecom Section