Embed Size (px)
Citation preview
Presented by
SEBA Professional Services, LLC
September 1, 2015
The U.S. Department of Housing
and Urban Development
HUD-Administered Manufactured Home State
Installation Program
1Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
At present the following states DO NOT have a HUD-approved program:
1. Alaska 9. New Jersey
2. Connecticut 10. Rhode Island
3. Hawaii 11. South Dakota
4. Illinois 12. Vermont
5. Maryland 13. Wyoming
6. Massachusetts
7. Montana
8. Nebraska
Purpose
2Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
• Officially launches on September 1, 2015
• All installers in Nebraska must be licensed by December 1, 2015
• Building inspectors should not issue occupancy permits after December 1st if the home was not installed by a licensed installer.
• Inspectors must meet certain criteria
• Retailers/Dealers must submit information for unit tracking
Nebraska Installation Program
3Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
Experience Requirement for Installers
Experience
Must have 1 of the following:
1,800 hours of experience in installing manufactured homes
3,600 hours as a supervisor in the building construction industry
1,800 hours as an active manufactured home installation inspector
1 year of a college educational program in a construction-related field, or
A combination of experience and education that equals 3,600 hours of the
above
4Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
Licensing RequirementsInstallers must take and pass a federally approved training course:
Manufactured Home Installation Training by MHEI:- Training Date(s): Open September 1st Online- Pre-Registration: No- Location: http://installation.myicourse.com - Cost: $250
Manufactured Housing Resources (George Porter):- An in-person training course that is available to any state, government or entity that would like to
sponsor a session. - Contact George-porter.com for more information
Installer Training Requirements
Email questions to [email protected] 5
HUD Administered Manufactured Housing
State Installation Program
Licensing Requirements
Installers must take and pass a federally approved training course:
Pennsylvania Manufactured Housing Program & Basic Installer Training:
- Training Date(s): November 4-5
- Cost: $200
- More information: http://community.newpa.com/housing-and-development/#mh
- Location: Harrisburg, PA
Installer Training Requirements
Email questions to [email protected] 6
www.installation.myicourse.com
HUD Administered Manufactured Housing
State Installation Program
Installers
Bond and Insurance
All installers must hold at least one of the following:
1. Surety Bond Only – minimum $100,000
2. Insurance Only – minimum $250,000 with no deductible
3. Irrevocable Letter of Credit Only – minimum $100,000
4. Combination of Surety Bond and Insurance – minimum $10,000 bond
and $250,000 insurance
5. Combination of Irrevocable Letter of Credit and Insurance – minimum
$250,000 insurance and $10,000 letter of credit
7Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
Installers
HUD 307
An installer who installs homes in HUD-administered states must submit a
HUD 307 to SEBA to apply for an initial or renewed installation license.
HUD 309
Installers must submit the HUD 309 Manufactured Home Inspection Form
after having it signed by a qualified inspector.
All forms can be found at: manufacturedhousinginstallation.com8Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
HUD Installers License
9
License Notification & Expiration
Applicants are notified by email. The license is good for 3 years.Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
Inspections
Obtaining Inspections
It is the responsibility of the installer to arrange for an inspection at least 10
days prior to the completion of the installation.
Inspection Training
MHEI will make available an online inspection training course.
HUD 309
All inspectors must sign off on the HUD 309 Manufactured Home Inspection
Form, and are encouraged to use the Manufactured Home Inspection
Guideline to ensure quality inspections. 10Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
Inspections
Who May Perform Inspections
A manufactured home or residential building inspector employed by the
local authority having jurisdiction over the site of the home, provided that
the jurisdiction has a residential code enforcement program
A professional engineer
A registered architect
A HUD-accepted Production Inspection Primary Inspection Agency
(IPIA) or a Design Approval Primary Inspection Agency (DAPIA)
An International Code Council certified inspector11Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
Inspections
Inspection Guideline
It is recommended that installers and inspectors utilize the Manufactured Home
Installation Inspection Guideline during the set and inspection of the home to ensure
quality installations. It should be kept with the home records by the installer and
inspector. The guideline can be found at: manufacturedhousinginstallation.com.
Permits
After December 1, 2015 permitting offices and inspectors should no longer
issue/approve occupancy permits for homes that have not been installed by a licensed
manufactured home installer.12Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
Retailers and Dealers
Tracking information
Per 24 CFR 3286.113, within 30 days from the time a purchaser or lessee enters into a
contract to purchase or lease a manufactured home, the retailer or distributor of the home
must provide HUD with specific information on the home, site, installer and inspector.
HUD 305 and 306To submit this information, the retailer and distributor must complete and submit:
1. HUD 305 which identifies the home and home purchaser’s information
2. HUD 306 which identifies the installer’s and inspector’s information
13Email questions to [email protected]
HUD Administered Manufactured Housing
State Installation Program
SEBA Contact Information
• Email: [email protected]
• Phone: 202-552-7356
• Fax: 202-379-3340
• Website: www.manufacturedhousinginstallation.com
• Address:Office of Manufactured Housing Installation Programs
C/O SEBA Professional Services, LLC
1325 G Street, NW Suite 500
Washington, DC 2000514Email questions to [email protected]
![HUD-FPI-MAY2013.PDF [ HUD-FPI-MAY2013.PDF ]](https://img.pdfslide.us/doc/110x75/588c64bd1a28abf9208b7388/hud-fpi-may2013pdf-hud-fpi-may2013pdf-.jpg)
