www.akersolutions.com/subsea© Copyright 2011 Aker Solutions. All rights reserved.

Hub inspection camera

The purpose of the Hub inspection camera (HIC) is toserve as a mobile, ROV operated observation eye, able toaccess confined spaces during subsea operations suchas mating of Connector hubs, mating of Flying leads, andother critical operations when close-up observation isnecessary. The HIC is powered from the ROV.

The camera housing is located inside a protective casing.Focus is pre-set at a range of 20 mm (approx.) to infinite,adjustment is possible. The HIC has an electronic iris.

The HIC is handled by the ROV manipulator and has its ownintegrated light source. According to the specific jobrequirements, it can be equipped in an extended or short armversion. The Protective casing mounting flange allows anumber of optional orientations relative to the extension arm(extended or short).

Fishtail

handle

Flexjoint

Extension

arm

SeaSpy

camera

Protective

casing

Length, short / extended: 398,0 mm (15.7") / 1134,0 mm (44.6")

Width: 145,0 mm (5.7")

Height: 69,0 mm (2.7")

Net weight in air: 7,0 kg

Net weight submerged: 6,0 kg

Design depth: 3000 m

Temperature range: -10º to +40°C

Design codes: ISO 13628-1

ISO 13628-8

SAP material number: 10010527

Product group: WP08 Intervention and ROV tooling

For further information please contact:

www.akersolutions.com/subsea

Field proven design

To the right you see the HIC in the transport box.Transport box inventory:1. Camera cable2. SeaSpy camera3. Fishtail w/Flexjoint4. Camera housing w/extension arm

Project reference:• Gimboa

Aker Solutions ASSnarøyveien 36, NO-1364 FornebuPO Box 94, NO-1325 Lysaker