25
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Security Level: www.huawei.com Separate Mount Installation

huawei Separate Mount Installation

Embed Size (px)

DESCRIPTION

huawei

Citation preview

Page 1: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Security Level:

www.huawei.com

Separate Mount Installation

Page 2: huawei Separate Mount Installation

CONTENT

• 1+0 (7G~38G)• 1+1 (7G~38G)• 1+0 /1+1 (6G)

Page 3: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3

1+0 (7G~38G)

Plan Document

Identify the Polarization Mode

Change

No Change

Change Antenna Polarization

Assemble Antenna and

Adaptor

Install Flexible Waveguide

Connect IF Cable

Install ODU Adaptor

IF Waterproof and Grounding

skip this step when using separate antenna.

Page 4: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4

1+0 (7G~38G)

Separate antennaCan install waveguide directly

Compact antennaCan not install waveguide directly

Antenna Introduction

Page 5: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5

1+0 (7G~38G)• Install Antenna and Adaptor ( skip this step when using the separate antenna)

Applying an appropriate lubricant the gasket of the feed boom.

Apply an appropriate lubricant to the gasket of the feed boom.

Remove the protective caps.

Page 6: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 6

1+0 (7G~38G)• Install Antenna and Adaptor

Installing the antenna adapter onto the antenna (The antenna adapter is required only when the waveguide interface is unavailable on the antenna.).

Keep the polarization direction of the antenna adapter consistent with that of the antenna.

① Install the antenna adapter onto the antenna.

② Close the four latches cornerwise.

Page 7: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 7

1+0 (7G~38G)• Install Antenna and Adaptor

Compact antenna with adaptor Separate antenna (needn’t adaptor)

Page 8: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 8

1+0 (7G~38G)• Install ODU and Adaptor

Installing the ODU adapter onto a proper position on the antenna pole.

Apply an appropriate lubricant to the gasket of the feed boom.

Page 9: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 9

1+0 (7G~38G)• Install ODU and Adaptor

Installing the ODU to the ODU Adaptor.

The “V” should be keep upwards.

Page 10: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 10

1+0 (7G~38G)• Install the Flexible Waveguide

Applying an appropriate lubricant to the gasket of the flanges at both ends of the flexible waveguide.

Page 11: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 11

1+0 (7G~38G)

CAUTION: The flexible waveguide can be bent only within its maximum bending angle and at the larger area side. The twisting angle of the flexible waveguide should not be larger than 90 degrees.

• Install the Flexible Waveguide

Keep the direction of the waveguide cavity of the flexible waveguide consistent with that of the adapter.

Page 12: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 12

1+0 (7G~38G)• Install the Flexible Waveguide

Keep the direction of the waveguide cavity of the flexible waveguide consistent with that of the ODU adapter and antenna’s feeder flange.

Page 13: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 13

1+0 (7G~38G)

Flexible Waveguide

Flexible waveguide should be fixed.

• Install the Flexible Waveguide

Page 14: huawei Separate Mount Installation

CONTENT

• 1+0 (7G~38G)• 1+1 (7G~38G)• 1+0 /1+1 (6G)

Page 15: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 15

1+1 (7G~38G)Plan

Document

Identify the Polarization Mode

Change

No Change

Change Antenna Polarization

Assemble &Lift Antenna

Install Antenna Adaptor

Install Flexible Waveguide

Connect IF Cable

Install ODU Adaptor

IF Waterproof and Grounding

Install Coupler and ODU

skip this step when using separate antenna.

Page 16: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 16

1+1 (7G~38G)• Install Coupler and ODU

Page 17: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 17

1+1 (7G~38G)• Install Coupler and ODU

Page 18: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 18

1+1 (7G~38G)• Install Flexible Waveguide

Page 19: huawei Separate Mount Installation

CONTENT

• 1+0 (7G~38G)• 1+1 (7G~38G)• 1+0 /1+1 (6G)

Page 20: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 20

1+0/1+1 (6G)• Apply appropriate lubricant to the gasket on the flange interface of the antenna.

Page 21: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 21

1+0/1+1 (6G)• ODU Interface

Page 22: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 22

1+0/1+1 (6G)• Installing the ODU onto the ODU bracket.• Installing the ODU on the pole.

Page 23: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 23

1+0 (6G) Installing the waveguide-to-coaxial converter.

The coaxial interface of the converter or the coupler must not face upwards.

Connecting the RF cable and Waterproofing the connectors.

Page 24: huawei Separate Mount Installation

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 24

1+1 (6G) Installing the hybrid coupler.

The coaxial interface of the converter or the coupler must not face upwards.

Connecting the RF cable and Waterproofing the connectors.

Page 25: huawei Separate Mount Installation

Thank youwww.huawei.com