Huawei-bsc6810-parameter reference

  • View
    44

  • Download
    3

Embed Size (px)

DESCRIPTION

rnc6810-parmater reference

Text of Huawei-bsc6810-parameter reference

CoverRNCV200R009BSC6810 V200R011C00SPC100Parameter ReferenceHuawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.Huawei Technologies Co., Ltd.Address:Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaWebsite:http://www.huawei.comEmail:support@huawei.comCopyright Huawei Technologies Co., Ltd. 2009. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.Trademarks and Permissionsand other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders.NoticeThe information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

&L&G&C&F&R&L&D&C&R&P&Nhttp://www.huawei.comsupport@huawei.com

About This DocumentPurposeThis describes RNC parameters, including the meaning, values, and usage of RNC parameters.VersionThe product version related to this document is: BSC6810 V200R011C00SPC100.Intended AudienceNetwork plannersField engineersSystem engineersShift operatorsOrganizationEach parameter is described in the following aspects.DescriptionRemarksParameter IDSimple string for identifying a parameterParameter NameFull name of the parameterMML CommandCommands for setting the parameter, and optional/mandatory attribute of the parameter in each commandNENEs on which the parameter is setMeaningFunctions, functioning ways, and protocols of the parameterValue TypeParameter value typeGUI Value RangeParameter value range displayed on the GUIActual Value RangeActual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF.UnitParameter value unitDefault ValueInitial value provided by the systemRecommended ValueValues recommended in different scenariosImpactParameter impact scope, that is, objects specified when the parameter is setParameter RelationshipRelationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters.Service Interrupted After ModificationWhether modifying the parameter value may interrupt the existing servicesInterruption ScopePossible interruption scope in the case that modifying the parameter value may interrupt the existing servicesInterruption Duration (min)Possible interruption duration in the case that modifying the parameter value may interrupt the existing servicesCautionCautions to be taken during the modificationAccessWhether this parameter is read/write or read onlyAttributeWhether this parameter is a radio parameter, a transport parameter, or an equipment parameterIntroduced in VersionVersion in which this parameter is introduced

&L&G&C&F&R&L&D&C&R&P&N

Parameter ListParameter IDParameter NameMML CommandNEMeaningValue TypeGUI Value RangeActual Value RangeUnitDefault ValueRecommended ValueImpactParameter RelationshipService Interrupted During ModificationInterruption ScopeInterruption Duration(min)CautionAccessAttributeIntroduced in VersionAAL2PATHTAAL2 Path TypeADD AAL2PATH(Mandatory)RNCThe type of service carried by the AAL2 path that users expect.Enumeration TypeR99, HSPA, SHARER99,HSPA,SHARENone-NoneAAL2 PathNoneN (No impact on the UE in idle mode)AAL2 PathNot involvedThe parameter modification has no impact on the equipment.Read & WriteTransportRAN11.0AbsTimeSpecify TimeSET POOLPRIMHOSTPOLICY(Mandatory)RNCThis parameter specifies the time to execute re-host policy for the primary hosted NodeB, after the RNC recovers from disaster and starts to operate.Compound Typehour, min, sec00:00:00~23:59:59s-NoneRNCThis paramter must be configured when [PARA]ReHostPolicy[/PARA] is set to REHOSTDELAY.N (No impact on the UE in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioRAN11.0Ac09ToAscAC 0~9 to ASC mappingADD PRACHACTOASCMAP(Optional)RNCIt defines the mapping of AC 0~9 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type0~70~7None00CellThe ASCs are configured through [MML]ADD PRACHASC[/MML].N (Impact on random access for UEs in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioVersions earlier than RAN11.0Ac10ToAscAC 10 to ASC mappingADD PRACHACTOASCMAP(Optional)RNCIt defines the mapping of AC 10 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type0~70~7None00CellThe ASCs are configured through [MML]ADD PRACHASC[/MML].N (Impact on random access for UEs in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioVersions earlier than RAN11.0Ac11ToAscAC 11 to ASC mappingADD PRACHACTOASCMAP(Optional)RNCIt defines the mapping of AC 11 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type0~70~7None00CellThe ASCs are configured through [MML]ADD PRACHASC[/MML].N (Impact on random access for UEs in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioVersions earlier than RAN11.0Ac12ToAscAC 12 to ASC mappingADD PRACHACTOASCMAP(Optional)RNCIt defines the mapping of AC 12 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type0~70~7None00CellThe ASCs are configured through [MML]ADD PRACHASC[/MML].N (Impact on random access for UEs in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioVersions earlier than RAN11.0Ac13ToAscAC 13 to ASC mappingADD PRACHACTOASCMAP(Optional)RNCIt defines the mapping of AC 13 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type0~70~7None00CellThe ASCs are configured through [MML]ADD PRACHASC[/MML].N (Impact on random access for UEs in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioVersions earlier than RAN11.0Ac14ToAscAC 14 to ASC mappingADD PRACHACTOASCMAP(Optional)RNCIt defines the mapping of AC 14 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type0~70~7None00CellThe ASCs are configured through [MML]ADD PRACHASC[/MML].N (Impact on random access for UEs in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioVersions earlier than RAN11.0Ac15ToAscAC 15 to ASC mappingADD PRACHACTOASCMAP(Optional)RNCIt defines the mapping of AC 15 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type0~70~7None00CellThe ASCs are configured through [MML]ADD PRACHASC[/MML].N (Impact on random access for UEs in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioVersions earlier than RAN11.0AccessServiceClassAccess service classADD PRACHASC(Mandatory)RNCIdentifying an ASC.Enumeration TypeASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7None-NonePhysical channelNoneNot involvedNot involvedNot involvedThis parameter cannot be modified.Read & WriteRadioVersions earlier than RAN11.0ACFCAddress and control field compressADD PPPLNK(Optional) ADD MPLNK(Optional)RNCThis parameter specifies whether to enable the address and control fields compression switch.Enumeration TypeDisable, EnableDisable (not support the address and control field compress function), Enable (support the address and control field compress function)NoneEnableEnablePPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK)NoneNot involvedNot involvedNot involvedThis parameter cannot be modified.Read & WriteTransportVersions earlier than RAN11.0AcIntervalOfCellAC Restriction Interval Of CellSET ACALGO(Mandatory)RNCInterval of automatic access classes restriction between cells. When a subsystem of an RNC performs access classes restriction on cells managed by this subsystem, it selects the first cell at random. After waiting for the time specified in this parameter, the subsystem selects the second cell and the first cell is still with access classes restriction. The process lasts until all the cells are going through access classes restriction. For detailed information of this parameter, refer to 3GPP TS 22.011.Interval Type1~3600010~360000, step:10ms-50RNCNoneN (No impact on the UE in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioRAN11.0AcIntervalOfCellsAccess Class Restriction interval between CellsSET DSACAUTOALGO(Mandatory)RNCSpecifies the interval between consecutive pollings imposed on the PS domain and CS domain in different cells according to the flexible polling restriction mode.Interval Type1~360001~36000s-100RNCWhen [PARA]DsacAutoSwitch[/PARA] is set to ON,the parameter need configure;else,need not configure.N (No impact on the UE in idle mode)Not involvedNot involvedThe parameter modification has no impact on the equipment.Read & WriteRadioRAN11.0AcRangeRange of restrained Access ClassSET DSACAUTOALGO(Mandatory) ADD CELLDSACMANUALPARA(Mandatory)RNCSpecifies the restricted access class according to the flexible polling restriction mode.Bit Field TypeAC0(Access Class 0 Restriction), AC1(Access Class 1 Restriction), AC2(Access Class 2 Restriction), AC3(Access Class 3 Restriction), AC4(Access Clas