2
hardware specifications graphic specifications additional info Victory We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. Shipping size: 30” x 17” x 4” Shipping weight: 11 lbs. Color: black or silver Weight of base: 3.15 lbs. Profile of base: 14.5”d x 13”w x 3.5”t Height of display: 52” Pocket size: 1.5:d x 9”w x 7.5”t Bag: Black with red handle straps features & benefits Slim and attractive with 5 front facing pockets and a snap-together design, that’s the Victory! Carry bag included. Silver: VIC-S Black: VIC-B

Document

Embed Size (px)

DESCRIPTION

http://www.exhibitcorp.com/sites/default/files/u3/victoryblack.i.pdf

Citation preview

hardware specifications graphic specifications additional info

Victory

We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE.

Shipping size: 30” x 17” x 4”Shipping weight: 11 lbs.

Color: black or silverWeight of base: 3.15 lbs.Profile of base: 14.5”d x 13”w x 3.5”tHeight of display: 52”Pocket size: 1.5:d x 9”w x 7.5”tBag: Black with red handle straps

features & benefitsSlim and attractive with 5 front facing pockets and a snap-together design, that’s the Victory! Carry bag included.Silver: VIC-SBlack: VIC-B

Assembly Instructions

Reverse the procedure to disassemble

Remove the system form the box. Find the bottom section of the rack. The bottom section has both ends open as shown above.

Place the bottom section onto the foot, making sure that it snaps into place. Make sure the narrow end is down.

Find the top section of the rack. The top section has the literature pockets as pictured above.

Place the top section onto the bottom section, making sure that it snaps into place.

If done correctly there should be a slight back-wards slope to the system.

Your system is now ready to be used.