HTRAN_subscriber Permanent Data

Ericsson AB 2005 - All Rights Reserved

HTRAN

Home Translation Functions Changeable Exchange Adaptation

Contents

APPLICATION INFORMATION 2/155 18-CNT 238 0047 Uen AB

1 Function 2

Data

2.1 Subscriber Data 2.2 Mobile Telephony Data 3

Strapping

4

Glossary

5

References

Page 1 of 43Home Translation Functions Changeable Exchange Adaptation

4/16/2007file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1009\alex0148.htm

1 Function

Block HTRAN is part of the Home Location Register Subsystem (HRS) in APR.

Block HTRAN fetches, translates and analyses command parameters for command functions from Input-Output Subsystem (IOS), as well as inserts parameter data into the line buffer, and is the TC-User block for policing of Mobile Application Part (MAP) operations received in Home Location Register (HLR).

The block also translates MAP-Codes for signalling functions and provides them with subscription related data. All of this data is recognized by one unique code called service pointer. This pointer may point out any individual service from the Service data file.



2 Data

2.1 Subscriber Data

Parameter DescriptionIMSI International Mobile Subscriber Identity (IMSI)

Digit string 6 - 15 digits Each digit is 0-9.

NIMSI New IMSIDigit string 6 - 15 digits Each digit is 0-9.

ACIMSI Active IMSI Digit string 6 - 15 digits Each digit is 0-9.

MSISDN Mobile Station ISDN number (MSISDN)Digit string 5 - 15 digits Each digit is 0-9.

AMSISDN Additional MSISDNDigit string 5 - 15 digits Each digit is 0-9.

MMSISDN Master MSISDNDigit string 5 - 15 digits Each digit is 0-9.

SS Supplementary Service (SS)Identifier 2 - 6 characters Allowed SS identifiers are shown in Table 1. For information on which Basic Service Groups are applied by a SS, see Table 9.

Table 1 Supplementary ServicesSS identifier Description ActionALLSS ALL SUPPLEMENTARY SERVICES DBAC ALL CALL RESTRICTION SERVICES DBAIC BARRING OF ALL INCOMING CALLS A/D/PBAOC BARRING OF ALL OUTGOING CALLS A/D/PBIC BARRING OF INCOMING CALLS DBICRO BARRING OF ALL INCOMING CALLS WHEN ROAMING OUTSIDE THE HOME

PUBLIC LAND NOBILE NETWORK (PLMN) COUNTRYA/D/P



The Supplementary Services ACR, AOC, ASL, BSL, CLIP, CLIR, COLP, COLR, CREL, CUG, CUNRL, EMLPP, ECT, HOLD, ICI, MPTY, OIN, PLMNO, RTCA, SERVTL, TIN, TTP, OICK, TICK and UNIV cannot be used as an argument of command parameter SS. They are used as an argument of command parameter SUD except for provisioning of ASL, BSL, CREL, CUG, CUNRL, PLMNO, SERVTL, TTP and UNIV services (See: Table 3 )

When a certain Supplementary Service is not supported by the system the corresponding string will not be recognized by it.

SS are only printed (printout SUPPLEMENTARY SERVICE DATA) if the Supplementary Service has been provided.

BOC BARRING OF OUTGOING CALLS DBOIC BARRING OF ALL OUTGOING INTERNATIONAL CALLS A/D/PBOIEXH BARRING OF ALL OUTGOING INTERNATIONAL CALLS EXCEPT THOSE

DIRECTED TO THE HOME PLMN COUNTRY A/D/P

CAW CALL WAITING A/D/PCCFS ALL CONDITIONAL FORWARDING SERVICES R/A/E/DCFB CALL FORWARDING ON MOBILE SUBSCRIBER BUSY R/A/E/D/PCFNRC CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE R/A/E/D/PCFNRY CALL FORWARDING ON NO REPLY R/A/E/D/PCFS ALL FORWARDING SERVICES R/A/E/DCFU CALL FORWARDING UNCONDITIONAL R/A/E/D/PDCF DEFAULT CALL FORWARDING R/E/PSPN SINGLE PERSONAL NUMBER R/E/P

Table 2 ActionsAction Identifier DescriptionR This string can be used in the command HGSSI to register a Supplementary Service. A This string can be used in the command HGSSI to activate a Supplementary Service E This string can be used in the command HGSSE to erase a Supplementary Service D This string can be used in the command HGSSE to deactivate a Supplementary Service.P This string can appear in the printout initiated by command HGSDP (SUPPLEMENTARY SERVICE DATA )SUD Subscriber Data (SUD)

Expressed as a-b[-c] where:

a SUD code Identifier 2 - 6 characters



b SUD value part 1 Numeral 0 - 65535

c SUD value part 2 Numeral 0 - 4095

Table 3 Subscriber DataSUD Code Description SUD Value part 1 SUD Value part 2 ActionACC ACCOUNT CODES 0-2 - L/P/S/D 0 = not provided 1 = provided and mandatory 2 = provided and optional

The availability of this parameter value depends on commercial agreements.

ACR ANONYMOUS CALL REJECTION 0-2 - L/P/S/D 0 = not provided 1 = provided and not active 2 = provided and active The availability of this parameter value depends

on commercial agreements.

AOC ADVICE OF CHARGE 0-2 - L/P/S/ D/R 0 = Advice of charge not provided 1 = Advice of charge information provided 2 = Advice of charge charging provided ASL AUTONOMOUS SELF LOCATION MOBILE

ORIGINATING LOCATION SERVICES (LCS) CLASS

0-1 - L/D

0= not provided 1= provided The availability of this parameter value depends


BAIC BARRING OF ALL INCOMING CALLS 0-1 - L/P/S/D 0 = not provided 1 = provided BAOC BARRING OF ALL OUTGOING CALLS 0-1 - L/P/S/D 0 = not provided 1 = provided BICRO BARRING OF ALL INCOMING CALLS WHEN 0-1 - L/P/S/D



ROAMING OUTSIDE THE HOME PLMN COUNTRY 0 = not provided 1 = provided BOIC BARRING OF ALL OUTGOING INTERNATIONAL

CALLS 0-1 - L/P/S/D

0 = not provided 1 = provided BOIEXH BARRING OF ALL OUTGOING INTERNATIONAL

CALLS EXCEPT THOSE DIRECTED TO THE HOME PLMN COUNTRY

0-1 - L/P/S/D

0 = not provided 1 = provided BS21 BEARER SERVICE "DATA CIRCUIT

ASYNCHRONOUS 300 b/s" 0-1 - L/P/S/D

0 = not subscribed 1 = subscribed

Incompatible with BS2G when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and their values are different from zero.

Incompatible with BS2F when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and their values are different from zero.

BS22 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 1200 b/s"

0-1 - L/P/S/D




BS23 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 1200-75 b/s"

0-1 - L/P/S/D







0-1 - L/P/S/D





0-1 - L/P/S/D





0-1 - L/P/S/D


Incompatible with BS2G when both SUD's are



entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and their values are different from zero.


BS2F FALL-BACK ASYNCHRONOUS BEARER SERVICE 0-5 - L/P/S/D 0 = No Fall-Back Bearer Service subscribed 1 = The Fall-Back Bearer Service is BS21 2 = The Fall-Back Bearer Service is BS22 3 = The Fall-Back Bearer Service is BS24 4 = The Fall-Back Bearer Service is BS25 5 = The Fall-Back Bearer Service is BS26


Incompatible with BS2x when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and their values are different from zero. BS2x refers to any of BS21, BS22, BS23, BS24, BS25 and BS26.

Incompatible with BS2G when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), BS2G value is zero and BS2F value is different from zero.

BS2G GENERAL ASYNCHRONOUS BEARER SERVICE 0-1 - L/P/S/D 0 = not subscribed 1 = subscribed


Incompatible with BS2x when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and their values are different from zero.BS2x refers to any of BS21, BS22, BS23, BS24, BS25 and BS26.

Incompatible with BS2F when both SUD's are entered in commands HGMCI (parameter



NEWSUD) or HGSPC (parameter SUD), BS2G value is zero and BS2F value is different from zero.

BS31 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 1200 b/s"

0-1 - L/P/S/D





0-1 - L/P/S/D





0-1 - L/P/S/D







0-1 - L/P/S/D




BS3F FALL-BACK SYNCHRONOUS BEARER SERVICE 0-4 - L/P/S/D 0 = No Fall-Back Bearer Service subscribed 1 = The Fall-Back Bearer Service is BS31 2 = The Fall-Back Bearer Service is BS32 3 = The Fall-Back Bearer Service is BS33 4 = The Fall-Back Bearer Service is BS34


Incompatible with BS3x when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and their values are different from zero. BS3x refers to any of BS31, BS32, BS33 and BS34.

Incompatible with BS3G when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), BS3G value is zero and BS3F value is different from zero.

BS3G GENERAL SYNCHRONOUS BEARER SERVICE 0-1 - L/P/S/D 0 = not subscribed 1 = subscribed


Incompatible with BS3x when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and their



values are different from zero. BS3x refers to any of BS31, BS32, BS33 and BS34.

Incompatible with BS3F when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), BS3G value is zero and BS3F value is different from zero.

BSL BASIC SELF LOCATION MOBILE ORIGINATING LCS CLASS

0-1 - L/D



CAPL CHANNEL ALLOCATION PRIORITY LEVEL 0-15 - L/P/S/D 0 = no priority level assigned 1-14 = priority level (highest priority level = 1) (lowest priority level = 14) 15 = priority level not used CAT SUBSCRIBER CATEGORY 0-255 - L/P/S/D 0 = Calling party is unknown at this time 1 = Operator, language French 2 = Operator, language English 3 = Operator, language German 4 = Operator, language Russian 5 = Operator, language Spanish

6 = Available to administrations for selecting a particular language by mutual agreement



9 = Reserved 10 = Ordinary calling subscriber 11 = Calling subscriber with priority 12 = Data call (voice band data) 13 = Test call



14 = Not used 15 = Payphone 16-223 = Not used 224-254 = National use 255 = Not used CAW CALL WAITING 0-1 - L/P/S/D 0 = not provided 1 = provided CFB CALL FORWARDING ON MOBILE SUBSCRIBER

BUSY0-1 - L/P/S/D

0 = not provided 1 = provided CFNRC CALL FORWARDING ON MOBILE SUBSCRIBER

NOT REACHABLE0-1 - L/P/S/D

0 = not provided 1 = provided CFNRY CALL FORWARDING ON NO REPLY 0-1 - L/P/S/D 0 = not provided 1 = provided CFU CALL FORWARDING UNCONDITIONAL 0-1 - L/P/S/D 0 = not provided 1 = provided CLIP CALLING LINE IDENTIFICATION PRESENTATION 0-1 - L/P/S/D 0 = not provided 1 = provided CLIR CALLING LINE IDENTIFICATION RESTRICTION 0-1 - L/P/S/D 0 = not provided 1 = provided COLP CONNECTED LINE IDENTIFICATION

PRESENTATION0-1 - L/P/S/D

0 = not provided 1 = provided COLR CONNECTED LINE IDENTIFICATION

RESTRICTION 0-1 - L/P/S/D

0 = not provided 1 = provided CREL CALL/SESSION RELATED LCS PRIVACY CLASS 0-1 - L/D





CSP CAMEL SUBSCRIPTION PROFILE 0-255 - L/P/S/D 0 = no CAMEL Subscription Profile assigned 1-255= Camel Subscription Profile. The availability of this parameter value depends


Only one CSP is allowed as NEWSUD in command HGMCI

CUG CLOSED USER GROUP 0-1 - L/D 0 = not provided 1 = provided CUNRL CALL/SESSION UNRELATED LCS PRIVACY CLASS 0-1 - L/D 0 = not provided 1 = provided The availability of this parameter value depends


DBSG DEFAULT BASIC SERVICE GROUP 1-6 - L/P/S/D 1 = All Speech Transmission Services (TS10) 2 = Not used 3 = All Facsimile Transmission Services (TS60) 4 = Not used

5 = All Data Circuit Asynchronous Services (BS20)

6 = All Data Circuit Synchronous Services (BS30) DCF DEFAULT CALL FORWARDING 0-1 - L 0 = not registered 1 = registered DCSI DIALLED SERVICES CAMEL SUBSCRIPTION

INFORMATION 0-1 - L/D

0 = not provided 1 = provided The availability of this parameter value depends


DEMLPP ENHANCED MULTI-LEVEL PRECEDENCE AND 0-6 - L/P/S/D



PRE-EMPTION DEFAULT PRIORITY LEVEL 6 = Priority level A (highest) 5 = Priority level B 0 = Priority level 0 1 = Priority level 1 2 = Priority level 2 3 = Priority level 3 4 = Priority level 4 (lowest)


Incompatible when entered in commands HGMCI (parameter NEWSUD), HGSDC (parameter SUD) or HGSPC (parameter SUD), and its priority level is higher than MEMLPP priority level already stored in the database.

Incompatible with MEMLPP when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD), and DEMLPP value is higher than MEMLPP value.

ECT EXPLICIT CALL TRANSFER 0-1 - L/P/S/D 0 = not provided 1 = provided The availability of this parameter value depends


EMLPP ENHANCED MULTI-LEVEL PRECEDENCE AND PRE-EMPTION

0-1 - L/P/S/D

0 = not provided 1 = provided


When the Wireless Priority Service functionality is available, EMLPP is incompatible with specific format of stored forwarded-to-number.

GPRCSI GENERAL PACKET RADIO SERVICE (GPRS) CUSTOMIZED APPLICATIONS FOR MOBILE NETWORK ENHANCED LOGIC (CAMEL) SUBSCRIPTION INFORMATION

0-1 - L/D

0 = not provided



1 = provided The availability of this parameter value depends


HOLD CALL HOLD 0-1 - L/P/S/D 0 = not provided 1 = provided HPN HIGH PENETRATION NOTIFICATION 0-2 - L/P/S/D 0 = not provided 1 = provided with standard priority 2 = provided with high priority


ICI IMMEDIATE CALL ITEMIZATION 0-1 - L/P/S/D 0 = not provided 1 = provided IST IMMEDIATE SERVICE TERMINATION (IST) ALERT

TIMER 0, 15-255 - L/P/S/D

0 = subscriber not under IST condition 15-255 = subscriber under IST condition, IST

alert timer in minutes


ISTCSO IST CALL SUBSCRIPTION OPTION 0-1 - L/P/S/D 0 = call allowed when the IST Alert message is

received from G(MSC-VLR).

1 = call not allowed when the IST Alert message is received from G(MSC-VLR).


ISTGSO IST GMSC SUBSCRIPTION OPTION 0-1 - L/P/S/D 0 = service allowed when IST is not supported in

the interrogated GMSC

1 = only Operator Determined Barring of all incoming calls when IST is not supported in the interrogated GMSC


ISTVSO IST VLR SUBSCRIPTION OPTION 0-1 - L/P/S/D



0 = service allowed when IST is not supported in the serving VLR

1 = network induced activation of supplementary service Barring of All Outgoing Calls (BAOC) performed when IST is not supported in the serving VLR


LMU LOCATION MEASUREMENT UNIT 0-1 - L/D 0 = not LMU subscription 1 = LMU subscription The availability of this parameter value depends


MCSI MOBILITY MANAGEMENT CAMEL SUBSCRIPTION INFORMATION

0-1 - L/D



MEMLPP ENHANCED MULTI-LEVEL PRECEDENCE AND PRE-EMPTION MAXIMUM PRIORITY LEVEL

0-6 - L/P/S/D

6 = Priority level A (highest) 5 = Priority level B 0 = Priority level 0 1 = Priority level 1 2 = Priority level 2 3 = Priority level 3 4 = Priority level 4 (lowest)


Incompatible when entered in commands HGMCI (parameter NEWSUD), HGSDC (parameter SUD) or HGSPC (parameter SUD), and its priority level is lower than DEMLPP priority level already stored in the database.

Incompatible with DEMLPP when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD),and



DEMLPP value is higher than MEMLPP value.MMINT MOBILITY MANAGEMENT INTELLIGENT

NETWORK (IN) TRIGGERING SUBSCRIPTION DATA

0-1 - L/D



This string appears in the printout initiated by command HGSDP (PERMANENT SUBSCRIBER DATA) only if the service is activated for the subscriber.

MPTY MULTIPARTY SERVICE 0-1 - L/P/S/D 0 = not provided 1 = provided MSIM MULTIPLE SUBSCRIPTION DATA PROVISION

STATUS 0-1 - L/D

0 = The subscriber does not belong to any multiple subscription

1 = The subscriber belongs to a multiple subscription

The availability of this parameter value depends on comercial agreements

NAM NETWORK ACCESS MODE 0-2 - L/P/S/D 0 = both GPRS and non-GPRS networks 1 = only non-GPRS network 2 = only GPRS network


Only one NAM is allowed as NEWSUD in command HGMCI

The command HGSDC does not apply. OBA OPERATOR DETERMINED BARRING OF ALL

INCOMING AND OUTGOING CALLS 0-1 - S

0 = No operator barring of any call, active (in this case the value of OBI as well as OBO must be set to 0)

1 = Operator barring of all calls, active (in this



case the value of OBI as well as OBO must be set to 1)

Incompatible with OBI when both SUD's are entered in command HGMCI (parameter NEWSUD) and their values are different.

Incompatible with OBO when both SUD's are entered in command HGMCI (parameter NEWSUD) and the values are different.

OBCT OPERATOR DETERMINED BARRING OF INVOCATION OF CALL TRANSFER

0-4 - L/P/S/D

0 = not active 1 = Operator determined barring of invocation of

Call Transfer, active

2 = Operator determined barring of invocation of Call Transfer where at least one of the two calls is a call charged to the served subscriber, active

3 = Operator determined barring of invocation of Call Transfer where at least one of the two calls is a call charged to the served subscriber at international rates, active

4 = Operator determined barring of invocation of Call Transfer where at least one of the two calls is a call charged to the served subscriber at inter-zonal rates, active


OBDCT OPERATOR DETERMINED BARRING OF INVOCATION OF CALL TRANSFER WHERE BOTH CALLS ARE CHARGED TO THE SERVED SUBSCRIBER

0-1 - L/P/S/D

0 = not active 1 = active The availability of this parameter value depends


OBI OPERATOR DETERMINED BARRING OF ALL INCOMING CALLS

0-2 - L/P/S/D

0 = not active

1 = Operator determined barring of all incoming calls, active



2 = Operator determined barring of all incoming calls when roaming outside home PLMN country, active

Incompatible with OBA when both SUD's are entered in command HGMCI (parameter NEWSUD) and the values are different.

OBMCT OPERATOR DETERMINED BARRING OF FURTHER INVOCATION OF CALL TRANSFER IF THERE IS ALREADY ONE ONGOING TRANSFERRED CALL FOR THE SERVED SUBSCRIBER IN THE SERVING MOBILE SERVICES SWITCHING CENTRE (MSC)/VISITOR LOCATION REGISTER (VLR)

0-1 - L/P/S/D



OBO OPERATOR DETERMINED BARRING OF ALL OUTGOING CALLS

0-4 - L/P/S/ D/R

0 = not active

1 = Operator determined barring of all outgoing calls, active

2 = Operator determined barring of all outgoing international calls, active

3 = Operator determined barring of all outgoing international calls except for those directed to home PLMN country, active

4 = Operator determined barring of all outgoing calls when roaming outside home PLMN country, active

Incompatible with OBA when both SUD's are entered in command HGMCI (parameter NEWSUD) and the values are different.

OBOPRE OPERATOR DETERMINED BARRING OF OUTGOING PREMIUM RATE CALLS (ENTERTAINMENT)

0-1 - L/P/S/ D/R

0 = not active 1 = active OBOPRI OPERATOR DETERMINED BARRING OF

OUTGOING PREMIUM RATE CALLS 0-1 - L/P/S/ D/R



(INFORMATION) 0 = not active 1 = active OBP OPERATOR DETERMINED BARRING OF PACKET

ORIENTED SERVICES0-3 - L/P/S/ D/R

0 = not active 1 = Operator determined barring of all packet

oriented services, active

2 = Operator determined barring of packet oriented services from access points that are within the home PLMN whilst the subscriber is roaming in a visited PLMN, active

3 = Operator determined barring of packet oriented services from access points that are within the roamed visited PLMN, active


OBR OPERATOR DETERMINED BARRING OF ROAMING 0-2 - L/P/S/D 0 = not active 1 = Operator determined barring when roaming

outside home PLMN, active

2 = Operator determined barring when roaming outside home PLMN country active

OBRF OPERATOR DETERMINED BARRING OF REGISTRATION OF FORWARDED-TO NUMBER

0-5 - L/P/S/D

0 = not active

1 = Operator determined barring of registration of any call forwarded-to number, active

2 = Operator determined barring of registration of any international call forwarded-to number, active

3 = Operator determined barring of registration of any international call forwarded-to number except to a number within the HPLMN country, active

4 = Operator determined barring of registration of interzonal forwarded-to number, active

5 = Operator determined barring of registration



of any interzonal forwarded-to number except to a number within the HPLMN country, active


OBSSM OPERATOR DETERMINED BARRING OF SUPPLEMENTARY SERVICES MANAGEMENT

0-1 - L/P/S/D

0 = not active 1 = active OBZI OPERATOR DETERMINED BARRING OF

INCOMING INTER-ZONAL CALLS0-1 - L/P/S/D

0 = not active

1 = Operator Determined Barring of incoming calls when roaming outside the zone of the HPLMN country, active


OBZO OPERATOR DETERMINED BARRING OF OUTGOING INTER-ZONAL CALLS

0-3 - L/P/S/ D/R

0 = not active

1 = Operator Determined Barring of outgoing inter-zonal calls, active

2 = Operator Determined Barring of outgoing inter-zonal calls except those directed to the home PLMN country, active

3 = Operator Determined Barring of outgoing international calls except those directed to the home PLMN country AND barring of outgoing inter-zonal calls, active


OCSI ORIGINATING CAMEL SUBSCRIPTION INFORMATION

0-1 - L/D



OFA ORIGIN FOR FORWARDED-TO NUMBER ANALYSIS

0- 511 - L/P/S/D



OICK ORIGINATING INTELLIGENT NETWORK CATEGORY KEY

0- 999 - L/P/S/ D/R

0 = not provided 1-999 = provided OIN ORIGINATING INTELLIGENT NETWORK 0-1 - L/P/S/D 0 = not provided 1 = provided OSB1 WHEN REGISTERED IN THE HPLMN, OPERATOR

SPECIFIC BARRING (TYPE 1)0-1 - L/P/S/D

0 = not active 1 = active OSB2 WHEN REGISTERED IN THE HPLMN, OPERATOR






0 = not active 1 = active OSMCSI ORIGINATING SHORT MESSAGE SERVICE (SMS)

CAMEL SUBSCRIPTION INFORMATION0-1 - L/D



PAI POSITIONING ALLOWED INDICATOR 0-1 - L/P/S/D 0 = positioning not provided 1 = positioning provided


PDPCP PACKED DATA PROTOCOL (PDP) CONTEXT PROFILE

0-255 - L/P/S/D

0 = no PDP Context Profile assigned



1-255 = PDP Context Profile The availability of this parameter value depends


Only one PDPCP is allowed as NEWSUD in command HGMCI

PICI PREFERRED INTER-EXCHANGE CARRIER IDENTIFIER

0-255 0-2 L/P/S/D


value desired use

Incompatible with PICI2 when entered in commands HGMCI (parameter NEWSUD), HGSDC (parameter SUD) or HGSPC (parameter SUD) and its value is equal to PICI2 or PICI3 value already stored in the database.

0 = no preferred inter- exchange carrier assigned

0 = both national and internatio nal calls


1-255 = preferred inter- exchange carrier identifier

1 = national long- distance calls only (default)

Incompatible with PICI2 when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD) and their values are equal. Incompatible with PICI3 when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD) and their values are equal.

2 = international calls only

PICI2 PREFERRED INTER-EXCHANGE CARRIER IDENTIFIER 2

0-255 0-2 L/P/S/D


value desired use

Incompatible with PICI when entered in commands HGMCI (parameter NEWSUD), HGSDC (parameter SUD) or HGSPC (parameter SUD) and its value is equal to PICI2 or PICI3 value already stored in the database.


0 = both national and international calls

Incompatible with PICI3 when entered in commands HGMCI (parameter NEWSUD), HGSDC (parameter SUD) or HGSPC (parameter SUD) and its value is equal to PICI2 or PICI3





value already stored in the database. Incompatible with PICI when both SUD's are

entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD) and their values are equal. Incompatible with PICI3 when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD) and their values are equal.


PICI3 PREFERRED INTER-EXCHANGE CARRIER IDENTIFIER 3

0-255 0-2 L/P/S/D


value desired use

Incompatible with PICI when entered in commands HGMCI (parameter NEWSUD), HGSDC (parameter SUD) or HGSPC (parameter SUD) and its value is equal to PICI2 or PICI3 value already stored in the database.


0 = both national and internatio nal calls




Incompatible with PICI when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD) and their values are equal. Incompatible with PICI2 when both SUD's are entered in commands HGMCI (parameter NEWSUD) or HGSPC (parameter SUD) and their values are equal.


PLMNO PLMN OPERATOR LCS PRIVACY CLASS 0-1 - L/D 0 = not provided 1 = provided The availability of this parameter value depends


PRBT PERSONALIZED RING BACK TONE 0-1 - L/P/S/D 0 = not provided 1 = provided The availability of this parameter value depends




PWD SUBSCRIBER PASSWORD 0-9999 - L/S/DRED REDUNDANT CONDITION 0-1 - L/P/S/D 0 = primary 1 = redundant The availability of this parameter value depends


Incompatible when entered in command HGSDC and the value for REDMCH already stored in the database is set to 1.

Incompatible when entered in command HGMCI along with REDMCH set to 1 (parameter NEWSUD).

Incompatible when entered in command HGMCI (parameter NEWSUD) and parameter SUD is also present with REDMCH set to 1.

REDMCH REDUNDANCY MECHANISM 1-2 - L/P/S/D 1 = redundant condition assigned using the

Number Series Analysis function

2 = redundant condition assigned not using the Number Series Analysis function


REGSER REGIONAL SERVICES 0-65534 - L/S/D 0 = not provided 1-65534 = zone code set number RSA ROAMING SERVICE AREA IDENTIFIER 0-128 - L/P/S/D 0 = no roaming service area assigned 1-128 = roaming service area The availability of this parameter value depends


RTCA REAL TIME CHARGING FOR ALL 0-1 - L/P/S/D 0 = not provided 1 = provided The availability of this parameter value depends


SCHAR SUBSCRIBER CHARGING CHARACTERISTICS 0-15 0-4095 L/P/S/D The availability of this parameter value depends

on commercial agreements. profile index GPRS Support Node

behaviour index



SMSPAM SPAM CONTROL FOR MT-SMS ACTIVATION STATUS

0-1 - L/P/S/D



SERVTL SERVICE TYPE LCS LIST 0-1 - L/D 0 = not provided 1 = provided The availability of this parameter value depends


SOCB SUBSCRIPTION OPTION CONTROL OF BARRING SERVICES

0-1 - L/P/S

0-3 - D 0 = by the operator

1 = by the operator and the mobile subscriber (using password)

2 = only operator due to unsupported services. This value may be set automatically when the subscriber is located in a MSC/VLR which does not support a service. The previous value is recovered when the cause which provokes it is ended.

3 = only operator due to password blocked. This value may be set automatically when the password is blocked by the subscriber. The previous value is recovered when the password is unblocked by the operator.

SOCFB SUBSCRIPTION OPTION CALL FORWARDING ON MOBILE SUBSCRIBER BUSY

0-3 - L/P/S/D

0 = No notification to calling nor to served subscribers when the call is forwarded

1 = Only calling subscriber is notified when the call is forwarded

2 = Only served subscriber is notified when the call is forwarded

3 = Both, calling and served subscribers are notified when the call is forwarded



SOCFRC SUBSCRIPTION OPTION CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE

0-1 - L/P/S/D

0 = No notification to calling subscriber when the call is forwarded

1 = Notification to calling subscriber when the call is forwarded

SOCFRY SUBSCRIPTION OPTION CALL FORWARDING ON NO REPLY

0-3 - L/P/S/D

0 = No notification to calling nor to served subscribers when the call is forwarded

1 = Only calling subscriber is notified when the call is forwarded

2 = Only served subscriber is notified when the call is forwarded

3 = Both, calling and served subscribers are notified when the call is forwarded

SOCFU SUBSCRIPTION OPTION CALL FORWARDING UNCONDITIONAL

0-1 - L/P/S/D

0 = No notification to calling subscriber when the call is forwarded


SOCLIP SUBSCRIPTION OPTION CALLING LINE IDENTIFICATION PRESENTATION

0-1 - L/P/S/D

0 = without override category 1 = with override category SOCLIR SUBSCRIPTION OPTION CALLING LINE

IDENTIFICATION RESTRICTION 0-2 - L/P/S/D

0 = permanent mode 1 = temporary mode, presentation restricted 2 = temporary mode, presentation allowed SOCOLP SUBSCRIPTION OPTION CONNECTED LINE

IDENTIFICATION PRESENTATION0-1 - L/P/S/D

0 = without override category 1 = with override category SODCF SUBSCRIPTION OPTION FOR NOTIFICATION OF

DEFAULT CALL FORWARDING0-3 - L/P/S/D

0 = No notification to calling nor to served



subscribers when the call is forwarded


2 = Notification to served subscriber when the call is forwarded

3 = Notification to both, calling and served subscribers when the call is forwarded

SOPLCS SUBSCRIPTION OPTION FOR LCS 0-1 - L/P/S/D 0 = Allow mobile subscriber registration in

serving node without sending LCS data when LCS capability set 3 is not supported by the VLR/SGSN

1 = Allow mobile subscriber registration in serving node sending LCS data without the service type list when LCS capability set 3 is not supported by the VLR/SGSN


SOSDCF SUBSCRIPTION OPTION FOR SPECIFICATION OF FORWARDING CONDITIONS FOR DCF SUPPLEMENTARY SERVICE

1-7 - L/P/S/D

1 = When the called mobile subscriber is busy

2 = When the called mobile subscriber does not reply

3 = When the called mobile subscriber is busy and does not reply

4 = When the called mobile subscriber is not reachable

5 = When the called mobile subscriber is busy and not reachable

6 = When the called mobile subscriber is not reachable and does not reply

7 = When the called mobile subscriber is busy, not reachable and does not reply

SPN SINGLE PERSONAL NUMBER 0-1 - L 0 = not registered 1 = registered STE SPATIAL TRIGGERS 0-1 - L/D





STYPE SUBSCRIPTION TYPE 0-127 - L/P/S/D 0 = not provided 1-127 = provided TCSI TERMINATING CAMEL SUBSCRIPTION

INFORMATION0-1 - L/D



TICK TERMINATING INTELLIGENT NETWORK CATEGORY KEY

0-999 - L/P/S/ D/R

0 = not provided 1-999 = provided TIN TERMINATING INTELLIGENT NETWORK 0-1 - L/P/S/D 0 = not provided 1 = provided TRC SUBSCRIBER TRACING 0-1 - L/D 0 = not active 1 = active TS11 TELESERVICE "TELEPHONY" 0-1 - L/P/S/D 0 = not subscribed 1 = subscribed TS21 TELESERVICE "SHORT MESSAGE MT/PP" 0-1 - L/P/S/ D/R 0 = not subscribed 1 = subscribed TS22 TELESERVICE "SHORT MESSAGE MO/PP 0-1 - L/P/S/ D/R 0 = not subscribed 1 = subscribed TS61 TELESERVICE "ALTERNATE SPEECH AND

FACSIMILE GROUP 3" 0-1 - L/P/S/D

0 = not subscribed 1 = subscribed TS62 TELESERVICE "AUTOMATIC FACSIMILE GROUP 0-1 - L/P/S/D



3" 0 = not subscribed 1 = subscribed TSD1 TELESERVICE "AUXILIARY TELEPHONY" 0-1 - L/D 0 = not subscribed 1 = subscribed


TSMCSI TERMINATING SMS CAMEL SUBSCRIPTION INFORMATION

0-1 - L/D



TSMO TRANSFER OF SHORT MESSAGE OPTION 0-1 - L/S/D 0 = transfer of Short Message through the MSC 1 = transfer of Short Message through the

Serving GPRS Support Node (SGSN)


TTP TRANSFER TO THIRD PARTY MOBILE ORIGINATING LCS CLASS

0-1 - L/D



UNIV UNIVERSAL LCS PRIVACY CLASS 0-1 - L/D 0= not provided 1= provided The availability of this parameter value depends


VTCSI VISITED MSC TERMINATING CAMEL SUBSCRIPTION INFORMATION

0-1 - L/D





When a certain Subscriber Data is not supported by the system the corresponding string will not be recognized by it.

SUD for Account Codes, Basic Services, Supplementary Services, Operator Determined Barring, Regional Services, Channel Allocation Priority Level, Preferred Inter-Exchange Carrier Identifiers, Subscription Type, Redundant Condition, LCS-Classes, Location Measurement Unit, High Penetration Notification, Immediate Call Itemization, Mobility Management IN Triggering, Positioning Allowed Indicator, Roaming Service Area, Subscriber Tracing, CAMEL Subscription Information CAMEL Subscription Profile, PDP Context Profile, Service Type LCS List, IST, Spatial Triggers, Personalized Ring Back Tone , Multiple subscription data provision status and Spam Control for MT-SMS activation status are only printed (printouts HLR SUBSCRIBER PROFILE DATA and PERMANENT SUBSCRIBER DATA) if the SUD value part 1 for these SUDs is different from 0.

Subscription options for Subscriber Data are only printed (printouts HLR SUBSCRIBER PROFILE DATA and PERMANENT SUBSCRIBER DATA) if the SUD has been provided.

Subscription options for Supplementary Services and Supplementary Services related data are only printed (printouts HLR SUBSCRIBER PROFILE DATA and PERMANENT SUBSCRIBER DATA) if the Supplementary Service has been provided, except for the subscription options related to Default Call Forwarding supplementary service that are always printed (printout HLR SUBSCRIBER PROFILE DATA).

SUD RED is not printed in printout HLR SUBSCRIBER PROFILE DATA when the value for SUD REDMCH stored in the profile is set to 1.

When the SS is not provided, although the change of the related data and subscription option is accepted by commands HGSDC and HGSPC, the new value will not be relevant until the service is provided.

Table 4 ActionsAction Identifier DescriptionL This string can be used in the command HGLIP to print conditional list printout, and can appear in its printout

(HLR CONDITIONAL SUBSCRIBER LIST). This string can also be used as parameter SUD in command HGMCI to do a massive change of subscriber data

P This string can be used in the command HGSPC to change profile data, and can also appear in the printout initiated by command HGSPP (HLR SUBSCRIBER PROFILE DATA).

S This string can be used in the command HGSDC to change Subscriber Data. This string can also be used as parameter NEWSUD in command HGMCI to do a massive change of subscriber data.

D This string can appear in the printout initiated by command HGSDP (PERMANENT SUBSCRIBER DATA). R This string can be used in the command HGRPC to change roaming service profile data, and can also appear in

the printout initiated by command HGRPP (HLR ROAMING SERVICE PROFILE DATA). NEWSUD New Subscriber Data

Expressed as a-b[-c] where:

a New SUD code



Identifier 2 - 6 characters

b New SUD value part 1 Numeral 0 - 65535

c New SUD value part 2 Numeral 0 - 4095

Allowed SUD codes are shown on Table 3. BS Basic Service (BS) identifier

Identifier 2 - 6 characters

When a certain Basic Service (Bearer Service/Teleservice) is not supported by the system the corresponding string will not be recognized by it.

BS are only printed (printout PERMANENT SUBSCRIBER DATA) if the Basic Service (Bearer Service/Teleservice) is subscribed.

Table 5 Basic ServicesBS code Description ActionBS21 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 300 b/s P/D/TBS22 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 1200 b/s" P/D/TBS23 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 1200-75 b/s" P/D/TBS24 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 2400 b/s" P/D/TBS25 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 4800 b/s" P/D/TBS26 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 9600 b/s" P/D/TBS2G GENERAL ASYNCHRONOUS BEARER SERVICE P/D/TBS31 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 1200 b/s" P/D/TBS32 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 2400 b/s" P/D/TBS33 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 4800 b/s" P/D/TBS34 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 9600 b/s" P/D/TBS3G GENERAL SYNCHRONOUS BEARER SERVICE P/D/TTS11 TELESERVICE "TELEPHONY" P/D/TTS21 TELESERVICE "SHORT MESSAGE MT/PP" P/DTS22 TELESERVICE "SHORT MESSAGE MO/PP" P/DTS61 TELESERVICE "ALTERNATE SPEECH AND FACSIMILE GROUP 3" P/D/TTS62 TELESERVICE "AUTOMATIC FACSIMILE GROUP 3" P/D/TTSD1 TELESERVICE "AUXILIARY TELEPHONY" P/D/T



Table 6 ActionsAction Identifier DescriptionP This string can be used in the command HGBDP, to print the bearer capability data, and can appear in its printout

(HLR PLMN BEARER CAPABILITY DATA).D This string can appear in the printout initiated by command HGSDP (PERMANENT SUBSCRIBER DATA).T This string can be used in the commands HGCTI and HGCTE to initiate and end CAMEL triggering criteria data,

and can also appear in the printout initiated by command HGCMP (HLR CAMEL SUBSCRIPTION DATA). BSG Basic Service Group

Identifier 2 - 6 characters For information on which Supplementary Services apply to a BSG, see Table 9 .

When a certain Basic Service Group is not supported by the system the corresponding string will not be recognized by it.

Table 7 Basic Service GroupBSG identifier Description ActionALLAS ALL DATA ASYNCHRONOUS SERVICES I/EALLBES ALL BEARER SERVICES I/EALLDCA ALL DATA CIRCUIT ASYNCHRONOUS SERVICES I/EALLDCS ALL DATA CIRCUIT SYNCHRONOUS SERVICES I/EALLDTS ALL DATA TELESERVICES I/EALLSYS ALL DATA SYNCHRONOUS SERVICES I/EALLTS ALL TELESERVICES I/EBS20 ALL DATA CIRCUIT ASYNCHRONOUS SERVICES I/E/P/ C/TBS30 ALL DATA CIRCUIT SYNCHRONOUS SERVICES I/E/P/ C/TTS10 ALL SPEECH TRANSMISSION SERVICES I/E/P/ C/TTS20 ALL SHORT MESSAGE SERVICES I/E/PTS60 ALL FACSIMILE TRANSMISSION SERVICES I/E/P/ C/TTSD0 AUXILIARY SPEECH SERVICES I/E/P/ C/TTSEXSM ALL DATA TELESERVICES EXCEPT SHORT MESSAGE SERVICES I/E

Table 8 ActionsAction Identifier DescriptionI This string can be used in the command HGSSI to initiate a Supplementary Service. E This string can be used in the command HGSSE to end a Supplementary Service.P This string can appear in the printout initiated by command HGSDP (SUPPLEMENTARY SERVICE DATA). C This string can be used in the commands HGCUI, HGCUC, and HGCSC and can appear in the printout initiated by

commands HGCSP (HLR CLOSED USER GROUP BASIC SERVICE GROUP OPTIONS DATA) and HGCUP (HLR



The following table specifies the applicability of Supplementary Services to the different Basic Service Groups.

Note: X --> applies when using commands HGSSI and HGSSE

Note: The Supplementary Services ACR, AOC, ASL, BSL, CLIP, CLIR, COLP, COLR, CUG, CREL, CUNRL, EMLPP, ECT, HOLD, ICI, MPTY, OIN, TIN, OICK, PLMNO, RTCA, SERVTL, TICK, TTP and UNIV are not used in the commands HGSSI and HGSSE.

CLOSED USER GROUP DATA) when the CUG functionality is available.T This string can be used in the commands HGCTI and HGCTE to initiate and end CAMEL triggering criteria data,

and can also appear in the printout initiated by command HGCMP (HLR CAMEL SUBSCRIPTION DATA).

Table 9 Applicability of SS to Basic Service Groups SS BASIC SERVICE GROUPS BS30 BS20 TSD0 TS60 TS20 TS10BAIC X X X X X XBAOC X X X X X XBICRO X X X X X XBOIC X X X X X XBOIEXH X X X X X XCFU X X X X X CFB X X X X X CFNRC X X X X X CFNRY X X X X X CAW X X X X X SPN X DCF X X X X X CHAR Roaming area characteristic

Identifier 3 - 8 characters Table 10 Roaming Area CharacteristicCHAR identifier Description ActionAOCC ADVICE OF CHARGE (CHARGING) SUPPORTED I/E/P

This characteristic is only applicable when MAP version 1 is used between HLR and VLR. When a mobile subscriber having Advice of Charge Charging provided roams into a VLR not characterized as AOCC, the whole PLMN may be restricted until a new UPDATE LOCATION message is performed from a VLR supporting Advice of Charge.



When a certain Roaming Area Characteristic is not supported by the system the corresponding string will not be recognized by it.

The following table describes the Service Pointers that can be handled in the exchange (these service pointers can appear in the

EXTCAMEL EXTENDED CAMEL ALLOWED I/E/P The availability of this characteristic depends on commercial agreements. OLDHLIDR OLD HANDLING FOR LINE IDENTIFICATION RESTRICTION SERVICES I/E/P

This characteristic is applicable to both CLIR and COLR supplementary services. For CLIR it implies the old syntax in which only the values 'temporary default restricted' (RestrictionPerCall=TRUE) and 'permanent' (RestrictionPerCall=FALSE) are allowed to convey CLIR subscription information. For COLR it implies the old handling in which the COLR related data is sent to VLR in InsertSubscriberData message only if the service is provided.

ROAMREST ROAMING RESTRICTED IN THIS PLMN I/E/P This characteristic is applicable between HLR and VLR/SGSN. RSERV ROAMING ALLOWED WHEN THE REGIONAL SERVICES ARE NOT SUPPORTED I/E/PTRAFFV2 TRAFFIC WITH MAP VERSION 2 ALLOWED I/E/PTRAFFV3 TRAFFIC WITH MAP VERSION 3 ALLOWED I/E/POCSIPH1 ORIGINATING CAMEL PH1 SUBSCRIPTION INFORMATION ALLOWED I/E/P The availability of this characteristic depends on commercial agreements. OCSIPH2 ORIGINATING CAMEL PH2 SUBSCRIPTION INFORMATION ALLOWED I/E/P The availability of this characteristic depends on commercial agreements OCSIPH3 ORIGINATING CAMEL PH3 SUBSCRIPTION INFORMATION ALLOWED I/E/P The availability of this characteristic depends on commercial agreements OCSIPH4 ORIGINATING CAMEL PH4 SUBSCRIPTION INFORMATION ALLOWED I/E/P The availability of this characteristic depends on commercial agreements WPSROAM WIRELESS PRIORITY SERVICE ALLOWED I/E/P The availability of this characteristic depends on commercial agreements

Table 11 ActionsAction Identifier DescriptionI This string can be used in the command HGRCI to store the roaming area characteristic. E This string can be used in the command HGRCE to remove the roaming area characteristic.P This string can be used in the command HGRCP to print the roaming area characteristics, and can also appear in

its printout (HLR ROAMING AREA CHARACTERISTICS DATA) and in the printouts initiated by command HGLSP (HLR MOBILE SUBSCRIBER LOCATION SURVEY and HLR GPRS MOBILE SUBSCRIBER LOCATION SURVEY).



printout file initiated by command HGPFI):

Table 12 Service PointersService Pointer Number

Meaning

2 CALL FORWARDING UNCONDITIONAL 4 CALL FORWARDING ON MOBILE SUBSCRIBER BUSY 5 CALL FORWARDING ON NO REPLY6 CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE 7 SINGLE PERSONAL NUMBER 8 CALL WAITING9 CALL HOLD10 MULTIPARTY SERVICE 11 ADVICE OF CHARGE 15 BARRING OF ALL OUTGOING CALLS 16 BARRING OF ALL OUTGOING INTERNATIONAL CALLS17 BARRING OF ALL OUTGOING INTERNATIONAL CALLS EXCEPT THOSE DIRECTED TO THE HOME PLMN COUNTRY19 BARRING OF ALL INCOMING CALLS20 BARRING OF ALL INCOMING CALLS WHEN ROAMING OUTSIDE THE HOME PLMN COUNTRY21 SUBSCRIBER CATEGORY 23 OPERATOR DETERMINED BARRING OF ALL OUTGOING CALLS 24 OPERATOR DETERMINED BARRING OF ALL INCOMING CALLS 25 OPERATOR DETERMINED BARRING OF ROAMING26 OPERATOR DETERMINED BARRING OF OUTGOING PREMIUM RATE CALLS (INFORMATION)27 OPERATOR DETERMINED BARRING OF OUTGOING PREMIUM RATE CALLS (ENTERTAINMENT) 28 OPERATOR DETERMINED BARRING OF SUPPLEMENTARY SERVICES MANAGEMENT29 WHEN REGISTERED IN THE HPLMN, OPERATOR SPECIFIC BARRING (TYPE 1)30 WHEN REGISTERED IN THE HPLMN, OPERATOR SPECIFIC BARRING (TYPE 2)31 WHEN REGISTERED IN THE HPLMN, OPERATOR SPECIFIC BARRING (TYPE 3)32 WHEN REGISTERED IN THE HPLMN, OPERATOR SPECIFIC BARRING (TYPE 4)33 ORIGIN FOR FORWARDED-TO NUMBER ANALYSIS34 SUBSCRIBER PASSWORD 35 IMMEDIATE CALL ITEMIZATION 36 ORIGINATING INTELLIGENT NETWORK37 TERMINATING INTELLIGENT NETWORK



38 CALLING LINE IDENTIFICATION PRESENTATION 39 CALLING LINE IDENTIFICATION RESTRICTION40 CONNECTED LINE IDENTIFICATION PRESENTATION 41 CONNECTED LINE IDENTIFICATION RESTRICTION 42 SUBSCRIPTION OPTION CONTROL OF BARRING SERVICES 43 SUBSCRIPTION OPTION CALL FORWARDING UNCONDITIONAL44 SUBSCRIPTION OPTION CALL FORWARDING ON MOBILE SUBSCRIBER BUSY45 SUBSCRIPTION OPTION CALL FORWARDING ON NO REPLY46 SUBSCRIPTION OPTION CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE47 SUBSCRIPTION OPTION CALLING LINE IDENTIFICATION PRESENTATION48 SUBSCRIPTION OPTION CALLING LINE IDENTIFICATION RESTRICTION49 SUBSCRIPTION OPTION CONNECTED LINE IDENTIFICATION PRESENTATION50 ALL SPEECH TRANSMISSION SERVICES 51 TELESERVICE "TELEPHONY" 53 ALL SHORT MESSAGE SERVICES54 TELESERVICE "SHORT MESSAGE MT/PP" 55 TELESERVICE "SHORT MESSAGE MO/PP" 56 ALL FACSIMILE TRANSMISSION SERVICES 57 TELESERVICE "AUTOMATIC FACSIMILE GROUP 3" 58 AUXILIARY SPEECH SERVICES 59 TELESERVICE "AUXILIARY TELEPHONY" 60 ALL DATA CIRCUIT ASYNCHRONOUS SERVICES 61 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 300 b/s"62 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 1200 b/s"63 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 1200-75 b/s"64 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 2400 b/s"65 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 4800 b/s" 66 BEARER SERVICE "DATA CIRCUIT ASYNCHRONOUS 9600 b/s" 67 ALL DATA CIRCUIT SYNCHRONOUS SERVICES 68 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 1200 b/s"69 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 2400 b/s"70 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 4800 b/s"71 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 9600 b/s" 72 DEFAULT BASIC SERVICE GROUP



80 TELESERVICE "ALTERNATE SPEECH AND FACSIMILE GROUP 3"81 CLOSED USER GROUP 82 REGIONAL SERVICES 83 PREFERRED INTER-EXCHANGE CARRIER IDENTIFIER 84 DEFAULT CALL FORWARDING 85 SUBSCRIPTION OPTION FOR NOTIFICATION OF DEFAULT CALL FORWARDING86 SUBSCRIPTION OPTION FOR FORWARDING CONDITIONS FOR DEFAULT CALL FORWARDING87 CHANNEL ALLOCATION PRIORITY LEVEL.88 ORIGINATING INTELLIGENT NETWORK CATEGORY KEY89 TERMINATING INTELLIGENT NETWORK CATEGORY KEY90 SUBSCRIPTION TYPE 91 REDUNDANT CONDITION 92 OPERATOR DETERMINED BARRING OF REGISTRATION OF FORWARDED-TO NUMBER 93 OPERATOR DETERMINED BARRING OF INCOMING INTER-ZONAL CALLS94 OPERATOR DETERMINED BARRING OF OUTGOING INTER-ZONAL CALLS95 GENERAL ASYNCHRONOUS BEARER SERVICE96 GENERAL SYNCHRONOUS BEARER SERVICE 97 FALL-BACK ASYNCHRONOUS BEARER SERVICE 98 FALL-BACK SYNCHRONOUS BEARER SERVICE99 MOBILITY MANAGEMENT INTELLIGENT NETWORK TRIGGERING SUBSCRIPTION DATA100 ACCOUNT CODES101 ORIGINATING CAMEL SUBSCRIPTION INFORMATION 102 TERMINATING CAMEL SUBSCRIPTION INFORMATION 103 HIGH PENETRATION NOTIFICATION104 SUBSCRIBER TRACING 105 NETWORK ACCESS MODE106 TRANSFER OF SHORT MESSAGE OPTION 107 ENHANCED MULTI-LEVEL PRECEDENCE AND PRE-EMPTION 108 ENHANCED MULTI-LEVEL PRECEDENCE AND PRE-EMPTION DEFAULT PRIORITY LEVEL 109 ENHANCED MULTI-LEVEL PRECEDENCE AND PRE-EMPTION MAXIMUM PRIORITY LEVEL110 POSITIONING ALLOWED INDICATOR 111 LOCATION MEASUREMENT UNIT112 UNIVERSAL LCS PRIVACY CLASS113 CALL/SESSION RELATED LCS PRIVACY CLASS



114 CALL/SESSION UNRELATED LCS PRIVACY CLASS 115 PLMN OPERATOR LCS PRIVACY CLASS116 BASIC SELF LOCATION MOBILE ORIGINATING LCS CLASS 117 AUTONOMOUS SELF LOCATION MOBILE ORIGINATING LCS CLASS 118 TRANSFER TO THIRD PARTY MOBILE ORIGINATING LCS CLASS 119 GPRS CAMEL SUBSCRIPTION INFORMATION120 ORIGINATING SMS CAMEL SUBSCRIPTION INFORMATION 121 SUBSCRIBER CHARGING CHARACTERISTICS122 TERMINATING SMS CAMEL SUBSCRIPTION INFORMATION 123 OPERATOR DETERMINED BARRING OF PACKET ORIENTED SERVICES124 MOBILITY MANAGEMENT CAMEL SUBSCRIPTION INFORMATION 125 VISITED MSC TERMINATING CAMEL SUBSCRIPTION INFORMATION 126 ROAMING SERVICE AREA127 PREFERRED INTER-EXCHANGE CARRIER IDENTIFIER 2 128 PREFERRED INTER-EXCHANGE CARRIER IDENTIFIER 3 129 EXPLICIT CALL TRANSFER130 OPERATOR DETERMINED BARRING OF INVOCATION OF CALL TRANSFER 131 OPERATOR DETERMINED BARRING OF INVOCATION OF CALL TRANSFER WHERE BOTH CALLS ARE CHARGED TO

THE SERVED SUBSCRIBER132 OPERATOR DETERMINED BARRING OF FURTHER INVOCATION OF CALL TRANSFER IF THERE IS ALREADY ONE

ONGOING TRANSFERRED CALL FOR THE SERVED SUBSCRIBER IN THE SERVING MSC/VLR133 SERVICE TYPE LCS LIST134 SUBSCRIPTION OPTION FOR LCS135 IST ALERT TIMER 136 IST VLR SUBSCRIPTION OPTION137 IST CALL SUBSCRIPTION OPTION138 IST GMSC SUBSCRIPTION OPTION139 DIALLED SERVICES CAMEL SUBSCRIPTION INFORMATION 140 PDP CONTEXT PROFILE 141 CAMEL SUBSCRIPTION PROFILE142 SPATIAL TRIGGERS 143 PERSONALIZED RING BACK TONE 144 ANONYMOUS CALL REJECTION 145 REAL TIME CHARGING FOR ALL 146 MULTIPLE SUBSCRIPTION DATA PROVISION STATUS



2.2 Mobile Telephony Data

147 REDUNDANCY MECHANISM148 SPAM CONTROL FOR MT-SMS ACTIVATION STATUS

Parameter DescriptionSSN Subsystem Number (SSN)

HLR entity within the Mobile Application Part. In case the MAP policing in HLR is not supported by the system this value will not be recognized.6 Subsystem Number 6

NP Numbering Plan (NP)The Numbering Plan that can be used in the policing address when SSN=6 (MAP-HLR)1 E.163 and E.164 0,2-15

Not applicable. These values can be used in the commands but they are not accepted by MAP when received from the network.

NA Nature of AddressThe Nature of address that can be used in the policing address when SSN=63 National significant number 4 International number 0-2, 5-127

Not applicable. These values can be used in the commands but they are not accepted by MAP when received from the network

OPER Incoming operations in HLR received in a TC-BEGIN dialogue primitiveExpressed as opslogan-opversion where:

opslogan Operation slogan Identifier 1 - 7 characters

opversion Operation version Numeral 1 - 8

When a certain operation is not supported by the system, the corresponding OPER value will not be recognized.

The allowed operations are described in the following table:

Table 13 Operations in HLR



OPER DescriptionACTIVSS-1 Activate SS with MAP version 1 ACTIVSS-2 Activate SS with MAP version 2ANYTINT-3 Any Time Interrogation with MAP version 3BSUBACT-1 Begin Subscriber Activity with MAP version 1DEACTSS-1 Deactivate SS with MAP version 1 DEACTSS-2 Deactivate SS with MAP version 2 ERASESS-1 Erase SS with MAP version 1ERASESS-2 Erase SS with MAP version 2 INTERSS-1 Interrogate SS with MAP version 1 INTERSS-2 Interrogate SS with MAP version 2ISTALER-3 IST Alert MAP version 3MSPURGE-2 MS Purge with MAP version 2 MSPURGE-3 MS Purge with MAP version 3 NOTEMSP-1 Note MS Present with MAP version 1PUSSDAT-1 Process Unstructured SS Data with MAP version 1PUSSREQ-2 Process Unstructured SS Request with MAP version 2RDYFSM-2 Ready for SM with MAP version 2RDYFSM-3 Ready for SM with MAP version 3 REGPASS-1 Register Password with MAP version 1 REGPASS-2 Register Password with MAP version 2REGTRSS-1 Register SS with MAP version 1 REGTRSS-2 Register SS with MAP version 2 RESDATA-2 Restore Data with MAP version 2 RESDATA-3 Restore Data with MAP version 3 ROUINRQ-1 Routing Information Request with MAP version 1ROUINRQ-2 Routing Information Request with MAP version 2SAUTHEN-2 Send Authentication Info with MAP version 2SAUTHEN-3 Send Authentication Info with MAP version 3 SETMWDA-1 Set Message Waiting Data with MAP version 1SETMWDA-2 Report SM Delivery Status with MAP version 2SETMWDA-3 Report SM Delivery Status with MAP version 3SPARAMR-1 Send Parameters with MAP version 1SROUINF-1 Send Routing Information with MAP version 1



3 Strapping

No strapping information is applicable to this block.

4 Glossary

SROUINF-2 Send Routing Information with MAP version 2SROUINF-3 Send Routing Information with MAP version 3SROULCS-3 Send Routing Information for Location Services with MAP version 3SROUTSM-1 Send Routing Information for SM with MAP version 1SROUTSM-2 Send Routing Information for SM with MAP version 2SROUTSM-3 Send Routing Information for SM with MAP version 3UNSSREQ-2 Unstructured SS Request with MAP version 2UNSSNOT-2 Unstructured SS Notify with MAP version 2UPDALOC-1 Update Location with MAP version 1UPDALOC-2 Update Location with MAP version 2UPDALOC-3 Update Location with MAP version 3 UPGPLOC-3 Update GPRS Location with MAP version 3SP Signalling Point (SP)

Expressed as ni-spc where:

ni Network Indicator (NI)

spc Signalling Point Code (SPC) Numeral 0 - 16383

0 International network number 1

1 International network number 2

2 National network number 1

3 National network number 2

BS Basic Service



5 References

This document has no references.

CAMEL Customized Applications for Mobile Network Enhanced LogicGPRS General Packet Radio ServiceHLR Home Location RegisterHRS Home Location Register SubsystemIMSI International Mobile Subscriber IdentityIN Intelligent NetworkIOS Input-Output SubsystemIST Immediate Service TerminationLCS Location ServicesMAP Mobile Application PartMSC Mobile services Switching CenterMSISDN Mobile Station ISDN numberMT Mobile TerminatedNI Network IndicatorNP Numbering PlanPDP Packet Data ProtocolPLMN Public Land Mobile NetworkSGSN Serving GPRS Support NodeSMS Short Message ServiceSP Signalling PointSPC Signalling Point CodeSS Supplementary ServiceSSN Subsystem NumberSUD Subscriber DataVLR Visitor Location Register



Documents

HTRAN_subscriber Permanent Data