www.morbark.com

HT1042 TRACK SHREDDER

The HT1042 features a single-rotor design and adjustable

anvil, allowing the operator to quickly change machine

set-up based on material to be processed.

FEATURES

» The HT1042 is an aggressive, versatile slow-speed shredder designed as a universal machine for reducing wood (pallets, demolition wood, green waste, etc.), industrial waste (railroad ties, construction, demolition, tires, plastic, etc.) and other waste streams

» Belly Conveyor is 17'10" x 40" (5.44 m x 12.19 m), featuring pan support with Dura-lite™ slides and EP 400/3 smooth belting

» Stacking Conveyor is 25'6" x 48" (7.77 m x 121.92 cm), featuring pan support with Dura-lite™ slides and 3-ply aggregate belt with chevron cleats

» Optional Cross Belt Magnet for removing trapped metal contamination

MORBARK® HT1042 TRACK SHREDDER

www.morbark.com 800.831.0042SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS 2/15/17

SPECIFICATIONS US METRICWeight 81,000 lbs 36,740 kg

Length (transport) 28'11" 8.8 m

Length (operating) 48'1" 14.65 m

Height (transport) 12'2" 3.71 m

Height (operating) 14'3" 4.34 m

Width 8'4" 2.54 m

Discharge Height 14'1" 4.29 m

Engine CAT

Horsepower 540 HP 402.7 kW

Fuel Capacity (tank) 184 gallons 696.5 litres

Hydraulic Oil Capacity 210 gallons 794 litres

Rotor Chamber 3'6" x 9'8" 1.06 m x 2.95 m

Rotor Length 9'10" 3 m

Rotor Diameter 3'5" 1.04 m

Rotor Weight 9,500 lbs 4,309.1 kg

Rotor Speed Variable 0 to 40 RPM

Rotor Torque 2.2 million inch pounds 248,566.6 N•m

Tracks Strickland

2

3/8" AR400 steel welded onto Rotor Drum for added strength and durability.

ROTOR SURFACE WEAR PLATES

3

Machined and Heat Treated Alloy Steel with tungsten carbide applied for extended wear.

INSERTS 4

2½" thick 4140HT steel welded to the rotor tube for secure bolting of inserts.

HAMMER/INSERT HOLDER

5

1 ¼" AR400 steel welded to 1" A572 GR 50 steel. This is where the hammer passes through to make the initial cut/breakdown of material.

COUNTER KNIFE/ANVIL TOOTH ASSEMBLY

6 COUNTER KNIFE/ANVIL DOOR POSITION ADAPTER

1 ½" A572 GR 50 steel, the door can be arranged in 6 different positions to alter size of end product and tolerance level for trapped metal contamination.

1" thick A572 GR 50 steel used for supporting the Rotor Drives and as the foundation for the base.

BASE END WALL1

2

56

1 3 4